02 INTRODUCTION - ESMA Industrial Enterprises
Transcription
02 INTRODUCTION - ESMA Industrial Enterprises
INTRODUCTION CONTENTS DESCRIPTION PAGE A Statement On Apollo® Ball Valves i Conbraco Industries Inc ii Manufacturing Locations iii Manufacturing Locations (cont’d) iv Warranty Information v Sales Representative Information vi The Apollo® Numbering System vii How To Order - Options viii Section Contents Back ix Prev. Page | Next BALL VALVE SERIES The manufacturing of a superior quality product and its placement in the market at a competitive price has been the cornerstone of American manufacturing success. The same has been true of Conbraco Industries, Inc. and its Apollo® Ball Valve Division. “When you specify Apollo®, you can count on a quality product, engineered and designed for safety and outstanding performance.” All Manufacturing Facilities Registered To ISO 9001 Standards. Back Prev. Page | Next Conbraco’s Customer Focus Advances Product And Service Quality Worldwide For almost 75 years, Conbraco Industries has been a leader in the development of valves and other flow control products for commercial, residential and industrial applications. Now Conbraco is leading the industry in pursuit of product and service quality. In the early 1990’s, Conbraco was one of the first U.S. valve manufacturers to implement a rigorous continuous quality improvement process and to gain ISO 9001 certification. More recently, the Matthews, N.C.-based company has begun an ambitious program addressing nearly every phase of its operation in order to reach one simple goal: to better meet the product and service needs of Conbraco customers everywhere. One example is Conbraco's recent investment in a single, company-wide information software platform. The new J.D. Edwards OneWorld system integrates customer order processing, shipping, manufacturing and inventory for more accurate customer information. Lean Manufacturing Conbraco took another step forward by moving to lean manufacturing at its U.S. facilities. By reducing set-up times and overloads, improving machining capabilities and eliminating multiple machining steps, lean manufacturing enables Conbraco to gain efficiency, improve deliveries, control costs and provide better customer service. While streamlining manufacturing has benefited Conbraco customers, expansion of the company's distribution network has been at the core of the company's efforts to shrink the acquisition cycle. Distribution Improvements Conbraco's fully stocked 42,500-square-foot distribution center in Reno, Nevada features the very latest material handling and storage equipment. The Reno facility is pivotal to the company's ability to provide next-day delivery of products to Western states. To better coordinate deliveries and technical service to customers within the European Union, Scandinavia, Africa and parts of the Middle East, Conbraco operates a 9,000-square-foot European Operations Center in Manchester, England. The company's first facility outside North America, the Manchester center stocks more than 2,400 products carrying the Conbraco®, Apollo® and RP&C® brand names. Conbraco Industries Canada continues to gain market share and serve customers from its 10,000 square-foot office and warehouse operation outside Toronto. Focused On The Customer Conbraco’s daily attention to details provides further evidence of focus on the customer. For example: • The company has established an awards program for employees recognizing them for exemplary customer service. • The company web site, conbraco.com, is constantly updated with the most complete and current product information available to make product selection and specification easier. • Finally, Conbraco has recently restructured its sales organization to provide better service to residential, commercial and industrial product customers. Conbraco is dedicated to providing valve buyers worldwide with the highest level of product and service quality. To find out more, contact your Conbraco/Apollo representative today. In addition to the company’s fully-computerized 75,000 squarefoot corporate distribution center in Pageland, SC, Conbraco now has complementary facilities in Nevada, Canada and Europe. Conbraco®, Apollo® and RP&C® are registered trademarks of Conbraco Industries, Inc. ii Back COPYRIGHT ©2003 CONBRACO IND., INC.– PRINTED IN U.S.A. Prev. Page | Next Corporate Headquarters Matthews, N.C. Apollo® Ball Valve Division Pageland, S.C. Back COPYRIGHT ©2003 CONBRACO IND., INC.– PRINTED IN U.S.A. Prev. Page | Next iii Steel Products Division Conway, S.C. Brass Products Division Pageland, S.C. iv Back COPYRIGHT ©2003 CONBRACO IND., INC.– PRINTED IN U.S.A. Prev. Page | Next Conbraco Industries Statement of Warranty & Limitations of Liability Conbraco Industries, Inc. warrants, to its initial purchaser only, that its products which are delivered to this initial purchaser will be of the kind described in the order or price list and will be free of defects in workmanship or material for a period of one year from the date of delivery to you, our initial purchaser. Should any failure to conform to this warranty appear within one year after the date of the initial delivery to our initial purchaser, Conbraco will, upon written notification thereof and substantiation that the goods have been stored, installed, maintained and operated in accordance with Conbraco’s recommendations and standard industry practice, correct such defects by suitable repair or replacement at Conbraco’s own expense. THIS WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR OTHER WARRANTY OF QUALITY, WHETHER EXPRESSED OR IMPLIED, EXCEPT THE WARRANTY OF TITLE AND AGAINST PATENT INFRINGEMENT. Correction of non-conformities, in the manner and for the period of time provided above, shall constitute fulfillment of all liabilities of Conbraco to our initial purchaser, with respect to the goods, whether based on contract, negligence, strict tort or otherwise. It is the intention of Conbraco Industries, Inc. that no warranty of any kind, whether expressed or implied, shall pass through our initial purchaser to any other person or corporation. LIMITATION OF LIABILITY: Conbraco Industries, Inc. SHALL NOT UNDER ANY CIRCUMSTANCES BE LIABLE FOR SPECIAL OR CONSEQUENTIAL DAMAGES SUCH AS, BUT NOT LIMITED TO, DAMAGES OR LOSS OF OTHER PROPERTY OR EQUIPMENT, LOSS OF PROFITS OR REVENUE, COST OF CAPITAL, COST OF PURCHASED OR REPLACEMENT GOODS, OR CLAIMS OF CUSTOMERS OF OUR INITIAL PURCHASER. THE REMEDIES OF OUR INITIAL PURCHASER, AND ALL OTHERS, SET FORTH HEREIN ARE EXCLUSIVE, AND THE LIABILITY OF CONBRACO WITH RESPECT TO SAME SHALL NOT, EXCEPT AS EXPRESSLY PROVIDED HEREIN, EXCEED THE PRICE OF THE GOODS UPON WHICH SUCH LIABILITY IS BASED. Back COPYRIGHT ©2003 CONBRACO IND., INC.– PRINTED IN U.S.A. Prev. Page | Next v THE NUMBERING SYSTEM 0 0 – 0 0 0 – 0 0 OPTIONS - (SEE NEXT PAGE) SERIES COPYRIGHT ©2003 CONBRACO IND., INC.– PRINTED IN U.S.A. vii 50 51 70 71 71AR 72 73A 74 75 76 76F 76AR 77 77AR 78 79 7A 7B 7H 7K 7M 80 81 82 83 83R 85 85R 86 86R 87 87A 87A-400 87A-500 88 88A 89 89AR 90 91 92 93 95 96 9A 399 452 453 CONFIGURATION BRONZE GAS VALVE, AGA & UL LISTED APOLLO & SATURN VALVES: BRONZE GAS VALVE, AGA 1 FNPT BRONZE 2 SOLDER & SOCKET WELD BRONZE WITH PADS 3 UNION END NPT BRONZE, ACTUATOR-READY 4 UNION END SOLDER CARBON STEEL, HI-PRESSURE 5 SPRING RETURN A105 CARBON STEEL 6 3-WAY NPT NICKEL 7 FULL PORT REFRIGERATION VALVES BRONZE, PAD-LOCKING 8 MALE X FNPT CF8M STAINLESS STEEL 9 3-WAY SOLDER/O-RING BOSS CF8M, STAINLESS STEEL, FULL PORT CF8M, ACTUATOR-READY APOLLO 3-PIECE VALVES BRONZE FULL PORT 1 FNPT FP BRONZE, ACTUATOR-READY 2 SOLDER/SOCKET WELD SPECIAL VALVES 3 1500# REGULAR PORT NPT REFRIGERANT VALVES 4 1500# REGULAR PORT SOCKET WELD CARBON STEEL FOR CHLORINE 5 1500# FULL PORT NPT BRONZE, FULL PORT, HYDRO 6 1500# FULL PORT SOCKET WELD STAINLESS STEEL, FULL PORT, HYDRO 7 BUTT WELD BRONZE, WITH DRAIN BRONZE, FULL PORT, WITH DRAIN 8 (NOT ASSIGNED) BRONZE, UL LISTED 9 1500# FULL PORT BUTT WELD BRONZE, UL LISTED, PLAIN BALL BRONZE 3-PIECE FULL PORT FLANGED VALVES CARBON STEEL 3-PIECE 1 CLASS 150 STANDARD PORT CARBON STEEL 3-PIECE, FULL PORT, ACTUATOR READY 2 CLASS 150 FULL PORT STAINLESS STEEL 3-PIECE, STD. PORT 3 (NOT ASSIGNED) STAINLESS STEEL 3-PIECE, STD. PORT, ACTUATOR READY 4 CLASS 150 ALLOY 20 STD. PORT (87A) STAINLESS STEEL 3-PIECE, FULL PORT 5 CLASS 150 ALLOY 20 FULL PORT (87A) STAINLESS STEEL 3-PIECE, FULL PORT, ACTUATOR READY 6 CLASS 300 ALLOY 20 FULL PORT STAINLESS STEEL FLANGED 7 CLASS 300 STANDARD PORT STAINLESS FLANGED (NEW DESIGN) 8 CLASS 300 ALLOY 20 STD. PORT ALLOY-20, FLANGED (NEW DESIGN) STD. PORT 9 CLASS 300 FULL PORT ALLOY-20, FLANGED (NEW DESIGN) FULL PORT CARBON STEEL FLANGED CARBON STEEL FLANGED (NEW DESIGN) CAST CARBON STEEL WITH PADS WCB, ACTUATOR-READY BRONZE, UNIBODY, UL LISTED - SATURN® BRONZE, UNIBODY - SATURN® CAST CARBON STEEL, UNIBODY - SATURN® CARBON STEEL, UNIBODY - SATURN® BRONZE, STOP & DRAIN STAINLESS STEEL, UNIBODY - SATURN® BRONZE, UNIBODY, HEAVY PATTERN - SATURN® ALLOY-20, NPT CF8M FLANGED, EXTENDED BONNET WCB CS FLANGED, EXTENDED BONNET VARIATIONS 1 2 3 4 5 6 7 8 9 ONE SIZE LARGER MALE RETAINER ADJUSTABLE STOP LEVER NI-CU BALL & STEM STAINLESS STEEL BALL & STEM ORIGINAL BALANCING STOP NACE TRIM, 89-160 SERIES ONE SIZE SMALLER FEMALE RETAINER (NOT ASSIGNED) PINNED RETAINER (BRONZE VALVES) SIZE* 1 2 3 4 5 6 7 8 9 0 A C E G H *BODY SIZE WHEN ENDS ARE MIXED. NOTE: NOT ALL VARIATIONS AND FEATURES ARE AVAILABLE ON SAME VALVE. CONSULT CONBRACO REPRESENTATIVE. ALL MANUFACTURING FACILITIES REGISTERED TO ISO 9001 STANDARDS. 1 /4" /8" 1 /2" 3 /4" 1" 11/4" 11/2" 2" 21/2" 3" 4" 6" 8" 10" 12" 3 OPTIONS (00-000-00) -01 -02 -03 -04 -05 -07 -08 -09 -10 -12 -13 -14 -15 -16 -17 -18 -19 -20 -21 -22 -23 -24 -25 -26 -27 -28 -29 -30 -31 -32 -33 -34 -35 -36 -38 -39 -40 -41 -42 -43 -44 -45 Standard Stem Grounded 11/4" Carbon Steel Stem Extension 21/4" Carbon Steel Stem Extension Plain Ball Steel Tee Handle 900 Reversed Stem Stainless Steel Lever Stainless Steel Lever & Nut Stamped “157 SWP” & Bagged Stamped “157 SWP” Side Vented Ball (Uni-Directional) Wheel Handle, Steel Chain Lever - Vertical Rough Chrome Plated - Bronze Valves Plain Yellow Grip Lock Plate Slot Vented Ball (Bi-Directional) - Bronze Valves UHMWPE Trim (non-PTFE) Viton Union Seals Tank Flange (2" 3-Piece valves only) Graphite Packing Graphite Packing, Vented Ball & Tack Welded Ret. Chevron Pkg., Vent, Assd. Dry Monel Trim (7A) Stainless Steel Latch-Lock Lever & Nut Actuator Mounting Pad NOT Drilled & Tapped Graphite Packing & Seals Cam-Lock and Grounded 7B Series w/Boss NOT Drilled/Tapped Stainless Steel Tee Handle & Nut 76-300 Series w/Pad Drilled/Tapped Nylatron Seats (96 Series) VTFE Trim Stainless Steel Hi-Rise Round Handle, Stainless Steel Nut PEEK Seats & Bearing (Graphite Packing & Seals) SS Hi-Rise Locking Wheel Handle, SS Nut Cyl-Loc and Grounded Automatic Drain (Bronze Valves Only) Non-Vented Ball - No Hole in Slot (Carbon Steel & Stainless Steel) Cyl-loc, Grnd B & S, 680 Loctite or 3 Tack Welds Seal Weld 76-100 & 89-100 Less Lever and Nut -46 -47 -48 -49 -50 -51 -52 -53 -54 -56 -57 -58 -59 -60 -61 -62 -63 -64 -65 -66 -67 -68 -69 -70 -72 -73 -74 -75 -76 -77 -78 -79 -80 -97 -98 -SW -MG -MH -MJ -MK -BC Latch-Lock Lever - Lock in Closed Position Only SS Oval Latch-Lock Handle & Nut SS Oval Handle (No Latch) & Nut Assembled Dry 2-1/4" Carbon Steel Locking Stem Extension One Tack Weld (I-7362-05 1X) Two Tack Welds (I-7362-05 2X) Three Tack Welds (I-7362-05 3X) Four Tack Welds (I-7362-05 4X) Multifill Seats & Packing Oxygen Cleaned Chain Lever - Hortizontal SS External Trim - 3-pc. Valves Grounded Ball & Stem Grounded Ball & Stem, Assembled Dry Body Center Section NPT x Solder/Socket Weld 250# Steam Trim Multifill Seats & Graphite Packing FNPT x Butt Weld Cleaned for Industrial Gas - Carbon Steel Valves 4" Stem Extension (3" & 4" 3-pc 82 Series) Purge Ports (Drilled/Tapped at Bottom & Approx. 45 Deg. from Top) 4" Extended Bonnet RTFE Packing TFE Packing - Spiral Wound Body Seals - TFE Fillers - Flange BV Graphite Packing - Spiral Wound Body Seals - Graphoil Fillers - Flange BV MPTFE Seats, PTFE Packing, RPTFE Gaskets Live Loaded 87A/88A Series (Lever) Live Loaded 87A/88A Series (Gear & Actuated) Delrin Seats Nylon Seats / Grpht. Packing 72 Series Multi-Seal (Super TFE) 87A/88A Series Grnd. Whl. Handle, Pinned or Tack Welded Grnd. Whl. Pinned or Tack Welded & 1-1/4 Stem Ext. Limit Switch Mounted Gear Operated, Standard Hand Wheel Gear Operated, Standard Hand Wheel & Lockout Device Gear Operated, Oversize Hand Wheel Gear Operated, Oversize Hand Wheel & Lockout Device Ball Check Not all options and combinations available on all sizes and series. Consult a Conbraco Representative. viii Back COPYRIGHT ©2003 CONBRACO IND., INC.– PRINTED IN U.S.A. Prev. Page | Next SECTION CONTENTS DESCRIPTION SECTION Two Piece Valves A Three Piece Valves B Uni-Body Valves C ANSI Flanged Valves D Three Way Valves E Union End Valves F Steam Prep Valves G Specialty Valves H Options J Top Entry Valves K Actuators L Engineering Data M Back COPYRIGHT ©2003 CONBRACO IND., INC.– PRINTED IN U.S.A. Prev. Page | Next ix SECTION A CONTENTS TWO PIECE BALL VALVES DESCRIPTION PAGE 70-100 Series, Threaded Bronze A-1 70-200 Series, Solder Bronze A-2 70-800 Series, M x F Threaded Bronze A-3 71-100 Series, Threaded Bronze with Mounting Pad A-4 71-AR Series, Actuator Ready Threaded Bronze A-5 72-100 Series, Threaded High Pressure Carbon Steel A-6 72-900 Series, SAE Straight Thread Carbon Steel A-7 73A-100 Series, Threaded Forged Carbon Steel A-8 76-100 Series, Threaded Stainless Steel with Mounting Pad A-9 76-AR Series, Actuator Ready Threaded Stainless Steel A-10 76F-100 Series, Threaded Stainless Steel Full Port A-11 77C-100 Series, Threaded Full Port Bronze with Mounting Pad A-12 77C-200 Series, Solder Full Port Bronze with Mounting Pad A-13 77-100 Series, Threaded Full Port Bronze with Mounting Pad A-14 77-AR Series, Actuator Ready Threaded Full Port Bronze A-15 77-200 Series, Solder Bronze, Full Port A-16 77-900 Series, SAE Straight Thread Bronze A-17 89-100 Series, Threaded Carbon Steel with Mounting Pad A-18 89-AR Series, Actuator Ready Threaded Carbon Steel A-19 399-100 Series, Threaded Alloy-20 with Mounting Pad A-20 Back Prev. Page | Next Back Prev. Page | Next 70-100 Series Bronze Ball Valve Threaded, 600 psig WOG, Cold Non-Shock. 150 psig Saturated Steam. (See referenced P/T charts) Vacuum Service to 29 inches Hg. Federal Specification: WW-V-35C, Type: II, Composition: BZ, Style: 3. MSS SP-110; Ball Valves Threaded, Socket-Welding, Solder Joint, Grooved and Flared Ends. FEATURES • Chromium plated ball • RPTFE seats and stuffing box ring • Blow-out-proof stem design • Adjustable packing gland STANDARD MATERIAL LIST 1. Lever and grip 2. Stem packing 3. Stem bearing 4. Ball 5. Seat (2) 6. Retainer Steel, zinc plated w/vinyl RPTFE RPTFE B16, chrome plated RPTFE B16 (1/4" to 1") B584-C84400 (1-1/4" to 3") VARIATIONS AVAILABLE: 70-120 Series 70-140 Series 70-150 Series 70-190 Series (Adjustable Stop Lever) (316 SS Ball & Stem) (Balancing Stop) (Locked Retainer) SIZE 1/4" 3/8" 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3" 4" Back A .37 .37 .50 .68 .87 1.00 1.25 1.50 2.00 2.50 3.12 B 1.03 1.03 1.12 1.50 1.68 2.00 2.18 2.34 3.12 3.37 3.68 C 2.06 2.06 2.25 3.00 3.37 4.00 4.37 4.68 6.25 6.75 7.37 D 1.75 1.75 1.75 2.12 2.25 2.62 3.06 3.25 3.72 4.12 5.25 E 3.87 3.87 3.87 4.87 4.87 5.50 8.00 8.00 8.00 8.00 10.00 Wt. .60 .56 .63 1.39 1.72 3.26 4.61 6.06 17.25 18.60 25.50 B16 B16 Steel, zinc plated PTFE B584-C84400 OPTIONS AVAILABLE: (SUFFIX) -02-03-04-05-07-08-10-14-15-16-17-21-24-27-30-32-35-36-39-40-41- BRONZE BALL VALVE NUMBER 70-101-01 70-102-01 70-103-01 70-104-01 70-105-01 70-106-01 70-107-01 70-108-01 70-109-01A 70-100-01 70-10A-01 7. Gland nut 8. Stem 9. Lever nut 10. Body seal (1-1/4" to 3") 11. Body -45-46-47-48-49-50-56-57-58-60-63-64-P01-T01- OPTION SIZES Stem Grounded 1/4" to 3" 1-1/4" CS Stem Extension 1/4" to 3" 2-1/4" CS Stem Extension 1/4" to 3" Plain Ball 1/4" to 3" Steel Tee Handle 1/4" to 2" 90º Reversed Stem 1/4" to 3" SS Lever & Nut 1/4" to 3" Side Vented Ball (Uni-Directional) 1/4" to 3" Wheel Handle, Steel 1/4" to 2" Chain Lever - Vertical 3/4" to 2" Rough Chrome Plated - Bronze Valves 1/4" to 3" UHMWPE Trim (Non-PTFE) 1/4" to 3" Graphite Packing 1/4" to 3" SS Latch-Lock Lever & Nut 1/4" to 3" Cam-Lock and Grounded 1/4" to 2" SS Tee Handle & Nut 1/4" to 2" VTFE Trim 1/4" to 3" SS Hi-Rise Round Handle, SS Nut 1/4" to 2" SS Hi-Rise Locking Wheel Handle, SS Nut 1/4" to 2" Cyl-Loc and Grounded 1/4" to 2" Automatic Drain (Bronze Valves Only) 1/4" to 2" see page J-8 Less Lever & Nut 1/4" to 3" Latch Lock Lever - Lock in Closed Position Only 1/4" to 3" SS Oval Latch-Lock Handle & Nut 1/4" to 1" SS Oval Handle (No Latch) & Nut 1/4" to 2" Assembled Dry 1/4" to 3" 2-1/4" CS Locking Stem Extension 1/4" to 3" Multifill Seats & Packing 1/4" to 3" Oxygen Cleaned 1/4" to 3" Chain Lever - Horizontal 3/4" to 2" Static Grounded Ball & Stem 1/4" to 3" NPT x Solder/Socket Weld 3/8" to 3" 250# Steam Trim 1/4" to 3" BSPP (Parallel) Thread Connection 1/4" to 3" BSPT (Tapered) Thread Connection 1/4" to 3" For Pressure/Temperature Ratings, Refer to Page M-8, Graph No. 4 COPYRIGHT ©2003 CONBRACO IND., INC. – PRINTED IN U.S.A. Prev. Page | Next A-1 70-200 Series Solder End Bronze Ball Valve Solder End, 600 psig WOG, Cold Non-Shock. 150 psig Saturated Steam. (See referenced P/T charts) Vacuum Service to 29 inches Hg. Federal Specification: WW-V-35C, Type: II, Composition: BZ, Style: 3. MSS SP-110; Ball Valves, Threaded, Socket-Welding, Solder Joint, Grooved and Flared Ends. FEATURES • Chromium plated ball • RPTFE seats and stuffing box ring • Blow-out-proof stem design • Adjustable packing gland STANDARD MATERIAL LIST 1. Lever and grip 2. Stem packing 3. Stem bearing 4. Ball 5. Seat (2) 6. Retainer Steel, zinc plated w/vinyl RPTFE RPTFE B16, chrome plated RPTFE B16 (3/8" to 1") B584-C84400 (1-1/4" to 3") VARIATIONS AVAILABLE: 70-220 Series (Adjustable Stop Lever) 70-240 Series (316 SS Ball & Stem) 70-250 Series (Balancing Stop) A-2 SIZE 3/8" 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3" Back A .37 .50 .68 .87 1.00 1.25 1.50 2.00 2.50 B 1.28 1.43 1.93 2.25 2.31 2.62 3.18 3.74 4.12 C 2.56 2.87 3.87 4.50 4.62 5.25 6.37 7.51 8.25 D 1.75 1.75 2.12 2.25 2.62 3.06 3.25 3.72 4.12 E 3.87 3.87 4.87 4.87 5.50 8.00 8.00 8.00 8.00 B16 B16 Steel, zinc plated PTFE B584-C84400 OPTIONS AVAILABLE: (SUFFIX) -02-03-04-05-07-08-10-14-15-16-24-27-32-35-39-45-46-47-48-49-50-56-57-58-60-63- OPTION Stem Grounded 1-1/4" CS Stem Extension 2-1/4" CS Stem Extension Plain Ball Steel Tee Handle 90º Reversed Stem SS Lever & Nut Side Vented Ball (Uni-Directional) Wheel Handle, Steel Chain Lever - Vertical Graphite Packing SS Latch-Lock Lever & Nut SS Tee Handle & Nut VTFE Trim SS Hi-Rise Locking Wheel Handle, SS Nut Less Lever & Nut Latch Lock Lever - Lock in Closed Position Only SS Oval Latch-Lock Handle & Nut SS Oval Handle (No Latch) & Nut Assembled Dry 2-1/4" CS Locking Stem Extension Multifill Seats & Packing Oxygen Cleaned Chain Lever - Horizontal Static Grounded Ball & Stem NPT x Solder/Socket Weld SIZES 3/8" to 3" 3/8" to 3" 3/8" to 3" 3/8" to 3" 3/8" to 2" 3/8" to 3" 3/8" to 3" 3/8" to 3" 3/8" to 2" 3/4" to 2" 3/8" to 3" 3/8" to 3" 3/8" to 2" 3/8" to 3" 3/8" to 2" 3/8" to 3" 3/8" to 3" 3/8" to 1" 3/8" to 2" 3/8" to 3" 3/8" to 3" 3/8" to 3" 3/8" to 3" 3/4" to 2" 3/8" to 3" 3/8" to 3" The 70-200 is designed to be soft soldered into lines without disassembly. This allows a tested valve to be installed without disturbing the seats and seals in any way. Soldering temperature not to exceed 500ºF. BRONZE BALL VALVE NUMBER 70-202-01 70-203-01 70-204-01 70-205-01 70-206-01 70-207-01 70-208-01 70-209-01A 70-200-01 7. Gland nut 8. Stem 9. Lever nut 10. Body seal (1-1/4" to 3") 11. Body F .505 .630 .880 1.130 1.380 1.630 2.130 2.630 3.130 G Wt. .37 .63 .50 .71 .75 1.44 .90 1.91 .96 2.95 1.09 3.99 1.34 5.71 1.48 15.53 1.67 16.74 For Pressure/Temperature Ratings, Refer to Page M-8, Graph No. 4 COPYRIGHT ©2003 CONBRACO IND., INC. – PRINTED IN U.S.A. Prev. Page | Next 70-800 Series Male x Female Bronze Ball Valve Male x Female Threaded, 600 psig WOG, Cold Non-Shock. 150 psig Saturated Steam. (See referenced P/T chart) Vacuum Service to 29 inches Hg. Federal Specification: WW-V-35C, Type: II, Composition: BZ, Style: 3. MSS SP-110; Ball Valves, Threaded, Socket-Welding, Solder Joint, Grooved and Flared Ends. FEATURES • Chromium plated ball • RPTFE seats and stuffing box ring • Male x Female threaded end connections • Blow-out-proof stem design • Adjustable packing gland STANDARD MATERIAL LIST 1. Lever and grip 2. Stem packing 3. Stem bearing 4. Ball 5. Seat (2) 6. Retainer Steel, zinc plated w/vinyl RPTFE RPTFE B16, chrome plated RPTFE B16 VARIATIONS AVAILABLE: 70-820 Series (Adjustable Stop Lever) 70-840 Series (316 SS Ball & Stem) 70-850 Series (Balancing Stop ) 7. Gland nut 8. Stem 9. Lever nut 10. Body seal (1-1/4" to 1-1/2") 11. Body B16 B16 Steel, zinc plated PTFE B584-C84400 OPTIONS AVAILABLE: (SUFFIX) -02-03-04-05-07-08-10-14-15-16-21-24-27-30-32-35-39-40-41-45-46-47-48-49-50-56-57-58-60-64- OPTION Stem Grounded 1-1/4" CS Stem Extension 2-1/4" CS Stem Extension Plain Ball Steel Tee Handle 90º Reversed Stem SS Lever & Nut Side Vented Ball (Uni-Directional) Wheel Handle, Steel Chain Lever - Vertical UHMWPE Trim (Non-PTFE) Graphite Packing SS Latch-Lock Lever & Nut Cam-Lock and Grounded SS Tee Handle & Nut VTFE Trim SS Hi-Rise Locking Wheel Handle, SS Nut Cyl-Loc and Grounded Automatic Drain (Bronze Valves Only) see page J-8 Less Lever & Nut Latch Lock Lever - Lock in Closed Position Only SS Oval Latch-Lock Handle & Nut SS Oval Handle (No Latch) & Nut Assembled Dry 2-1/4" CS Locking Stem Extension Multifill Seats & Packing Oxygen Cleaned Chain Lever - Horizontal Static Grounded Ball & Stem 250# Steam Trim SIZES 1/4" to 1-1/2" 1/4" to 1-1/2" 1/4" to 1-1/2" 1/4" to 1-1/2" 1/4" to 1-1/2" 1/4" to 1-1/2" 1/4" to 1-1/2" 1/4" to 1-1/2" 1/4" to 1-1/2" 3/4" to 1-1/2" 1/4" to 1-1/2" 1/4" to 1-1/2" 1/4" to 1-1/2" 1/4" to 1-1/2" 1/4" to 1-1/2" 1/4" to 1-1/2" 1/4" to 1-1/2" 1/4" to 1-1/2" 1/4" to 1-1/2" 1/4" to 1-1/2" 1/4" to 1-1/2" 1/4" to 1" 1/4" to 1-1/2" 1/4" to 1-1/2" 1/4" to 1-1/2" 1/4" to 1-1/2" 1/4" to 1-1/2" 3/4" to 1-1/2" 1/4" to 1-1/2" 1/4" to 1-1/2" MALE X FEMALE BRONZE BALL VALVE NUMBER 70-801-01 70-802-01 70-803-01 70-804-01 70-805-01 70-806-01 70-807-01 SIZE 1/4" 3/8" 1/2" 3/4" 1" 1-1/4" 1-1/2" Back A .37 .37 .50 .68 .87 1.00 1.25 B 1.40 1.46 1.68 2.00 2.31 2.31 3.00 C 2.43 2.50 2.81 3.50 4.00 4.31 5.18 D 1.75 1.75 1.81 2.12 2.25 2.62 3.06 E 3.87 3.87 3.87 4.87 4.87 5.50 8.00 Wt. .63 .60 .72 1.42 1.93 3.19 4.60 For Pressure/Temperature Ratings, Refer to Page M-8, Graph No. 4 COPYRIGHT ©2003 CONBRACO IND., INC. – PRINTED IN U.S.A. Prev. Page | Next A-3 71-100 Series Bronze Ball Valve With Mounting Pad Threaded, 600 psig WOG, Cold Non-Shock. 150 psig Saturated Steam. (See referenced P/T chart) Vacuum Service to 29 inches Hg. Federal Specification: WW-V-35C, Type: II, Composition: BZ, Style: 3. MSS SP-110; Ball Valves, Threaded, Socket-Welding, Solder Joint, Grooved and Flared Ends FEATURES • Chromium plated ball • RPTFE seats and stuffing box ring • Mounting pad for easy actuator mounting • Blow-out-proof stem design • Adjustable packing gland STANDARD MATERIAL LIST 1. Lever and grip 2. Stem packing 3. Stem bearing 4. Ball 5. Seat (2) 6. Retainer Steel, zinc plated w/vinyl RPTFE RPTFE B16, chrome plated RPTFE B16 (3/4" to 1") B584-C84400 (1-1/4" to 3") B16 B16 7. Gland nut 8. Stem 9. Lever nut 10. Body seal (1-1/4" to 3") 11. Body Steel, zinc plated PTFE B584-C84400 VARIATIONS AVAILABLE: 71-120 Series 71-140 Series 71-150 Series 71-190 Series (Adjustable Stop Lever) (316 SS Ball & Stem) (Balancing Stop) (Locked Retainer) OPTIONS AVAILABLE: (SUFFIX) -02-03-04-05-07-08-10-14-15-16-21-24-27-30-32-35-39-40-41- BRONZE BALL VALVE WITH MOUNTING PAD NUMBER SIZE A 71-104-01 3/4" .68 71-105-01 1" .87 71-106-01 1-1/4" 1.00 71-107-01 1-1/2" 1.25 71-108-01 2" 1.50 71-100-01 3" 2.50 B C D 1.50 1.68 2.00 2.18 2.34 3.37 3.00 3.37 4.00 4.37 4.68 6.75 2.12 2.25 2.62 2.87 3.06 4.12 E F 4.87 .87 4.87 .87 5.50 .93 8.00 .93 8.00 .93 8.00 N/A G 1.37 1.37 1.50 1.50 1.50 2.75 H Wt. 10-24 NC 1.63 10-24 NC 1.86 1/4-20 NC 3.39 1/4-20 NC 4.68 1/4-20 NC 5.72 1/4-20 NC 18.60 -45-46-47-48-49-50-56-57-58-60-64-P01-T01- OPTION SIZES Stem Grounded 3/4" to 3" 1-1/4" CS Stem Extension 3/4" to 3" 2-1/4" CS Stem Extension 3/4" to 3" Plain Ball 3/4" to 3" Steel Tee Handle 3/4" to 2" 90º Reversed Stem 3/4" to 3" SS Lever & Nut 3/4" to 3" Side Vented Ball (Uni-Directional) 3/4" to 3" Wheel Handle, Steel 3/4" to 2" Chain Lever - Vertical 3/4" to 2" UHMWPE Trim (Non-PTFE) 3/4" to 3" Graphite Packing 3/4" to 3" SS Latch-Lock Lever & Nut 3/4" to 3" Cam-Lock and Grounded 3/4" to 2" SS Tee Handle & Nut 3/4" to 2" VTFE Trim 3/4" to 3" SS Hi-Rise Locking Wheel Handle, SS Nut 3/4" to 2" Cyl-Loc and Grounded 3/4" to 2" Automatic Drain (Bronze Valves Only) 3/4" to 2" see page J-8 Less Lever & Nut 3/4" to 3" Latch Lock Lever - Lock in Closed Position Only 3/4" to 3" SS Oval Latch-Lock Handle & Nut 3/4" to 1" SS Oval Handle (No Latch) & Nut 3/4" to 2" Assembled Dry 3/4" to 3" 2-1/4" CS Locking Stem Extension 3/4" to 3" Multifill Seats & Packing 3/4" to 3" Oxygen Cleaned 3/4" to 3" Chain Lever - Horizontal 3/4" to 2" Static Grounded Ball & Stem 3/4" to 3" 250# Steam Trim 3/4" to 3" BSPP (Parallel) Thread Connection 3/4" to 3" BSPT (Tapered) Thread Connection 3/4" to 3" For Pressure/Temperature Ratings, Refer to Page M-8, Graph No. 4 *See 77-140 Series Full Port for 1/4", 3/8", 1/2" and 2-1/2" Sizes A-4 Back COPYRIGHT ©2003 CONBRACO IND., INC. – PRINTED IN U.S.A. Prev. Page | Next 71-ARX Series Bronze Std. Port Ball Valve with Actuator Ready ISO Mounting Pad Threaded, 600 psig WOG, Cold Non-Shock, 250 psig Saturated Steam. (See referenced P/T chart) Vacuum Service to 29 inches Hg. Federal Specification: WW-V-35C, Type: II, Composition: BZ, Style: 3. MSS SP-110; Ball Valves Threaded, Socket-Welding, Solder Joint, Grooved and Flared Ends FEATURES • Multi-piece packing set • ISO 5211 mounting pad • Stainless ball & stem • Blow-out-proof stem design • Adjustable packing gland • Live loaded packing STANDARD MATERIAL LIST 1. Stem packing 2. Stem bearing 3. Ball 4. Seat (2) 5. Retainer MPTFE RPTFE 316 SS MPTFE B16 (3/4" to 1") B584-C84400 (1-1/4" to 3") 6. Gland 7. Stem 8. Jam nut 9. Body seal 10. Body 11. Belleville washer(s) B16 316 SS SS PTFE (1-1/4" to 3") B584-C84400 SS OPTIONS AVAILABLE: (SUFFIX) -14-24-27-35-57- OPTION Vented Ball Graphite Packing Latch Lock Handle PTFE Seats Oxygen Cleaned SIZES 3/4" to 3" 3/4" to 2" 3/4" to 3" 3/4" to 3" 3/4" to 3" For Pressure/Temperature Ratings, Refer to Page M-8, Graph No. 4 BRONZE STD. PORT BALL VALVE WITH ISO MOUNTING PAD NUMBER 71-AR4-64 SIZE A WT. B C D E F G H I .84 .28 .247/.249 3/8-24 1.38 3/4" .68 1.50 3.00 2.16 .70 1.39 .28 1" 71-AR5-64 K (THRDS.) UNF J (FLATS) .87 1.68 3.37 2.28 .70 1.39 .28 .84 .28 .247/.249 3/8-24 1.76 71-AR6-64 1-1/4" 1.00 1.98 3.97 3.16 .98 1.95 .34 1.16 .26 .370/.372 5/8-18 3.51 71-AR7-64 1-1/2" 1.25 2.18 4.37 3.16 .98 1.95 .34 1.16 .21 .370/.372 5/8-18 4.40 71-AR8-64 2" 1.50 2.34 4.68 3.37 .98 1.95 .34 1.16 .21 .370/.372 5/8-18 5.89 71-AR9-64 2-1/2" 2.00 3.12 6.25 3.85 .98 1.95 .34 1.16 .22 .370/.372 5/8-18 14.12 71-AR0-64 3" 2.50 3.37 6.75 4.18 .98 1.95 .34 1.16 .22 .370/.372 5/8-18 18.55 Back COPYRIGHT ©2003 CONBRACO IND., INC. – PRINTED IN U.S.A. Prev. Page | Next A-5 72-100 Series Carbon Steel High Pressure Ball Valve Threaded, 3000 psig WOG, Cold Non-Shock Body rating. (See referenced P/T chart) 150 psig Saturated Steam. Vacuum Service to 29 inches Hg. Federal Specification: WW-V-35C, Type: II, Composition: CS, Style: 3. MSS SP-110; Ball Valves Threaded, Socket-Welding, Solder Joint, Grooved and Flared Ends. FEATURES • Barstock design • RPTFE seats and stuffing box ring • Fire safe design when ordered with graphite packing • Nitride corrosion protection • Adjustable packing gland • Full port, except 2" • Blow-out-proof stem design • Heavy duty lever STANDARD MATERIAL LIST 1. Lever and grip 2. Stem 3. Stem bearing 4. Retainer seal 5. Seat (2) 6. Ball Steel, zinc plated w/vinyl A108-CS chrome plated RPTFE RPTFE RPTFE A108-CS chrome plated VARIATIONS AVAILABLE: 72-140 Series (316 SS Ball & Stem) 7. Gland nut 8. Stem packing 9. Lever nut 10. Body 11. Retainer 12. Seat holder A108-CS RPTFE Steel, zinc plated A108-CS A108-CS A108-CS OPTIONS AVAILABLE: (SUFFIX) -02-03-04-07-08-10-14-15-19-21-24-45-56-60-64-77-78-79- OPTION SIZES Stem Grounded 1/2" to 2" 1-1/4" CS Stem Extension 1" to 1-1/2" 2-1/4" CS Stem Extension 1" to 1-1/2" Steel Tee Handle 1/2" to 1-1/2" 90º Reversed Stem 1/2" to 2" SS Lever & Nut 1/2" to 1-1/2" Side Vented Ball (Uni-Directional) 1/2" to 2" Wheel Handle, Steel 1/2" to 1" Lock Plate 1/2" to 2" UHMWPE Trim (Non-PTFE) 1/2" to 2" Graphite Packing 1/2" to 2" Less Lever & Nut 1/2" to 2" Multifill Seats & Packing 1/2" to 2" Static Grounded Ball & Stem 1/2" to 2" 250# Steam Trim 1/2" to 2" Live Loaded 87A/88A Series (Gear & Actuated) 1/2" to 2" Delrin Seats, Graphite Packing 1/2" to 2" Nylon Seats, Graphite Packing 1/2" to 2" CARBON STEEL HIGH PRESSURE BALL VALVE NUMBER 72-103-01 72-104-01 72-105-01 72-106-01 72-107-01 72-108-01 A-6 SIZE 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" Back A .62 .81 1.00 1.25 1.50 1.75 B 1.46 1.87 2.12 2.32 2.64 3.00 C 2.87 3.80 4.15 4.65 5.23 5.84 D 2.50 2.62 3.12 3.43 3.56 4.18 E 5.62 5.62 6.62 8.00 8.00 9.00 Wt. 1.98 3.09 4.87 7.67 10.50 15.26 For Pressure/Temperature Ratings, Refer to Page M-13, Graph No. 15 COPYRIGHT ©2003 CONBRACO IND., INC. – PRINTED IN U.S.A. Prev. Page | Next 72-900 Series Carbon Steel SAE Straight Thread Ball Valve Threaded, 3000 psig WOG, Cold Non-Shock Body Rating (See P/T Chart referenced below for seat rating). 150 psig Saturated Steam. Vacuum Service to 29 inches Hg. Federal Specification: WW-V-35C, Type: II, Composition: CS, Style: 3. MSS SP-110; Ball Valves Threaded, Socket-Welding, Solder Joint, Grooved and Flared Ends. FEATURES • Barstock design • RPTFE seats and stuffing box ring • Fire safe design when ordered with graphite packing • Nitride corrosion protection • Adjustable packing gland • Full port, except 2" • Blow-out-proof stem design • Heavy duty lever • SAE J512/J514 Straight Thread O-Ring Boss STANDARD MATERIAL LIST 1. Lever and grip 2. Stem 3. Stem bearing 4. Retainer seal 5. Seat (2) 6. Ball Steel, zinc plated w/vinyl A108-CS chrome plated RPTFE RPTFE RPTFE A108-CS chrome plated VARIATIONS AVAILABLE: 72-940 Series (316 SS Ball & Stem) 7. Gland nut 8. Stem packing 9. Lever nut 10. Body 11. Retainer 12. Seat holder A108-CS RPTFE Steel, zinc plated A108-CS A108-CS A108-CS OPTIONS AVAILABLE: (SUFFIX) -02-03-04-07-08-10-14-15-19-21-24-45-56-60-64-78-79- OPTION Stem Grounded 1-1/4" CS Stem Extension 2-1/4" CS Stem Extension Steel Tee Handle 90º Reversed Stem SS Lever & Nut Side Vented Ball (Uni-Directional) Wheel Handle, Steel Lock Plate UHMWPE Trim (Non-PTFE) Graphite Packing Less Lever & Nut Multifill Seats & Packing Static Grounded Ball & Stem 250# Steam Trim Delrin Seats, Graphite Packing Nylon Seats, Graphite Packing SIZES 1/4" to 2" 1" to 1-1/2" 1" to 1-1/2" 1/4" to 1-1/2" 1/4" to 2" 1/4" to 1-1/2" 1/4" to 2" 1/4" to 1" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" CARBON STEEL SAE STRAIGHT THREAD O-RING BOSS BALL VALVE NOM. NUMBER TUBE O.D. 72-901-01 1/4" 72-902-01 3/8" 72-903-01 1/2" 72-904-01 72-905-01 72-906-01 72-907-01 72-908-01 3/4" 1" 1-1/4" 1-1/2" 2" Back SIZE 7/16"-20 9/16"-18 3/4"-16 1-1/16"-12 1-5/16"-12 1-5/8"-12 1-7/8"-12 2-1/2"-12 A B .39 1.46 .51 1.46 .62 1.46 .81 1.00 1.25 1.50 1.75 1.87 2.12 2.32 2.64 3.00 C D E Wt. 2.84 2.84 2.84 2.50 2.50 2.50 5.62 5.62 5.62 2.09 2.06 2.56 3.71 4.15 4.65 5.23 5.84 2.62 3.12 3.43 3.56 4.18 5.62 3.07 6.62 4.91 8.00 7.73 8.00 10.21 9.00 14.88 For Pressure/Temperature Ratings, Refer to Page M-13, Graph No. 15 COPYRIGHT ©2003 CONBRACO IND., INC. – PRINTED IN U.S.A. Prev. Page | Next A-7 73A-100 Series Carbon Steel Ball Valve AAR Approved #E999032 Threaded, 1/4" to 1" 2000 psig WOG, 1-1/4" to 2" 1500 psig WOG, Cold Non-Shock. 150 psig Saturated Steam. (See referenced P/T chart) Vacuum Service to 29 inches Hg. Federal Specification: WW-V-35C, Type: II, Composition: CS, Style: 3. MSS SP-110; Ball Valves Threaded, Socket-Welding, Solder Joint, Grooved and Flared Ends. FEATURES • RPTFE seats & packing • Forged construction • Raised handle stops • Blow-out-proof stem design • Adjustable packing gland • Nitride corrosion protection • (-24) Fire safe to API 607 4th ed. class 600 burn STANDARD MATERIAL LIST 1. Lever nut 2. Gland nut 3. Stem packing 4. Retainer 5. Body seal Steel, zinc plated A108-CS RPTFE A108-CS RPTFE (1/2" to 2") 6. Ball 7. Seat (2) 8. Body 9. Stem bearing 10. Stem 11. Lever/grip A108-CS chrome plated RPTFE A105 RPTFE A108-CS Steel, zinc plated, with vinyl VARIATIONS AVAILABLE: 73A-140- Series (316 SS Ball & Stem NACE compliant) OPTIONS AVAILABLE: CARBON STEEL BALL VALVE NUMBER 73A-101-01 73A-102-01 73A-103-01 73A-104-01 73A-105-01 73A-106-01 73A-107-01 73A-108-01 A-8 SIZE 1/4" 3/8" 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" Back A .37 .37 .50 .68 .87 1.00 1.25 1.50 B 1.02 1.08 1.18 1.57 1.73 1.98 2.14 2.73 C 2.30 2.37 2.31 3.07 3.40 3.97 4.32 5.44 D 1.72 1.72 1.78 2.07 2.18 2.72 3.12 3.27 E 3.85 3.85 3.85 4.75 4.75 5.50 7.75 7.75 (SUFFIX) -02-03-04-07-08-10-14-15-16-21-24-27-30-32-35-39-40-44-45-47-48-50-52-56-58-60-64-67-P01-T01- OPTION SIZES Stem Grounded 1/4" to 2" 1-1/4" CS Stem Extension 1/4" to 2" 2-1/4" CS Stem Extension 1/4" to 2" Steel Tee Handle 1/4" to 1-1/2" 90º Reversed Stem 1/4" to 2" SS Lever & Nut 1/4" to 2" Vented ball 1/4" to 2" Wheel Handle, Steel 1/4" to 1-1/2" Chain Lever - Vertical 1/4" to 2" UHMWPE Trim (non TFE) 1/4" to 2" Graphite Packing 1/4" to 2" SS Latch-Lock Lever & Nut 1/4" to 2" Cam-Lock & Grounded 1/4" to 2" SS Tee Handle & Nut 1/4" to 2" VTFE Trim 1/4" to 2" SS Hi-Rise Locking Round Handle, SS Nut 1/4" to 2" Cyl-Loc & Grounded 1/4" to 2" Seal Welded 1/4" to 2" Less Lever & Nut 1/4" to 2" SS Oval Latch-Lock Handle & Nut 1/4" to 2" SS Oval Handle (No Latch) & Nut (No Latch) & Nut 1/4" to 2" 2-1/4" CS Locking Stem Extension 1/4" to 2" Two Tack Welds 1/4" to 2" Multi-fill Seats 1/4" to 2" Chain Lever - Horizontal 1/4" to 2" Static Grounded Ball & Stem 1/4" to 2" 250# Steam Trim 1/4" to 2" Cleaned for Industrial Gas - CS Valves 1/4" to 2" BSPP (Parallel) Thread Conn. 1/4" to 2" BSPT (Tapered) Thread Conn. 1/4" to 2" For Pressure/Temperature Ratings, Refer to Page M-12, Graph No. 13 (1/4" to 1") Refer to Page M-11, Graph No. 11 (1-1/4" to 2") AAR Approval No. E999032 (when -52 is specified) Prev. Page | Next COPYRIGHT ©2003 CONBRACO IND., INC. – PRINTED IN U.S.A. 76-100 Series Stainless Steel Ball Valve Threaded, 1/4" to 1" 2000 psig WOG, 1-1/4" to 2" 1500 psig WOG, 2-1/2" to 3" 1000 psig WOG. (See referenced P/T chart) Cold Non-Shock. 150 psig Saturated Steam, Vacuum Service to 29 inches Hg. Federal Specification: WW-V-35C, Type: II, Composition: SS, Style: 3. MSS SP-110; Ball Valves Threaded, Socket-Welding, Solder Joint, Grooved and Flared Ends. FEATURES • Investment cast components • RPTFE seats and stuffing box ring • Mounting pad for easy actuator mounting • Blow-out-proof stem design • Adjustable packing gland • Meets NACE MR-01-75 • SS lever and nut • (-24) 1/4" to 2" Certified to API 607, 4th Edition, Class 600 burn STANDARD MATERIAL LIST 1. Lever and grip 2. Stem packing 3. Stem bearing 4. Ball 5. Seat (2) 6. Retainer 304 SS w/vinyl RPTFE RPTFE A276-316 RPTFE A276-316 (1/4" to 1") A351-CF8M (1-1/4" to 3") 7. Gland nut 8. Stem 9. Lever nut 10. Body seal (1-1/4" to 3") 11. Body A276-316 A276-316 18-8 SS PTFE A351-CF8M OPTIONS AVAILABLE: STAINLESS STEEL BALL VALVE NUMBER 76-101-01 SIZE 1/4" A .37 B 1.03 C 2.06 D 1.75 E 3.87 F .50 G 1.12 Wt. .58 76-102-01 76-103-01 76-104-01 76-105-01 76-106-01 76-107-01 76-108-01 76-109-01 76-100-01 3/8" 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3" .37 .50 .68 .87 1.00 1.25 1.50 2.50 2.50 1.03 1.12 1.50 1.68 2.00 2.18 2.75 3.37 3.37 2.06 2.25 3.00 3.37 4.00 4.37 5.50 6.75 6.75 1.75 1.81 2.12 2.25 2.62 3.05 3.24 4.12 4.12 3.87 3.87 4.87 4.87 5.50 8.00 8.00 8.00 8.00 .50 .50 .87 .87 .93 .93 .93 2.75 2.75 1.12 1.12 1.37 1.37 1.50 1.50 1.50 3.37 3.37 .54 .63 1.27 1.63 3.06 4.04 6.05 15.57 16.79 Back (SUFFIX) -02-03-04-07-08-14-15-16-19-21-24-27-30-32-35-39-40-44-45-46-47-48-49-50-57-58-60-64-P01-T01- OPTION SIZES Stem Grounded 1/4" to 3" 1-1/4" CS Stem Extension 1/4" to 3" 2-1/4" CS Stem Extension 1/4" to 3" Steel Tee Handle 1/4" to 2" 90º Reversed Stem 1/4" to 3" Side Vented Ball (Uni-Directional) 1/4" to 2" Wheel Handle, Steel 1/4" to 2" Chain Lever - Vertical 3/4" to 2" Lock Plate 1/4" to 2" UHMWPE Trim (Non-PTFE) 1/4" to 3" Graphite Packing 1/4" to 3" SS Latch-Lock Lever & Nut 1/4" to 3" Cam-Lock and Grounded 1/4" to 2" SS Tee Handle & Nut 1/4" to 2" VTFE Trim 1/4" to 3" SS Hi-Rise Locking Wheel Handle, SS Nut 1/4" to 2" Cyl-Loc and Grounded 1/4" to 2" Seal Welded 1/4" to 2" Less Lever & Nut 1/4" to 3" Latch Lock Lever - Lock in Closed Position Only 1/4" to 3" SS Latch Lock Oval Handle 1/4" to 1" SS Oval Handle (No Latch) & Nut 1/4" to 2" Assembled Dry 1/4" to 3" 2-1/4" CS Locking Stem Extension 1/4" to 3" Oxygen Cleaned 1/4" to 3" Chain Lever - Horizontal 3/4" to 2" Static Grounded Ball & Stem 1/4" to 3" 250# Steam Trim 1/4" to 3" BSPP (Parallel) Thread Connection 1/4" to 3" BSPT (Tapered) Thread Connection 1/4" to 3" For Pressure/Temperature Ratings, Refer to Page M-12, Graph No. 14 (1/4" to 1") Refer to Page M-11, Graph No. 12 (1-1/4" to 2") Refer to Page M-10, Graph No. 8 (2-1/2" to 3") COPYRIGHT ©2003 CONBRACO IND., INC. – PRINTED IN U.S.A. Prev. Page | Next A-9 76-ARX Series Stainless Steel Std. Port Ball Valve with Actuator Ready ISO Mounting Pad Threaded, 1/4"-1" 2000 psig WOG, 1-1/4"-2" 1500 psig WOG, 2-1/2"-3" 1000 psig WOG. (See referenced P/T chart) Cold Non-Shock. 250 psig Saturated Steam. Vacuum Service to 29 inches Hg. Federal Specification: WW-V-35C, Type: II, Composition: SS, Style: 3. MSS SP-110; Ball Valves Threaded, Socket-Welding, Solder Joint, Grooved and Flared Ends. FEATURES • Multi-piece packing set • ISO 5211 mounting pad • Meets NACE MR-01-75 • Blow-out-proof stem design • Adjustable packing gland • Live loaded packing STANDARD MATERIAL LIST 1. Stem packing 2. Stem bearing 3. Ball 4. Seat (2) 5. Retainer MPTFE RPTFE 316 SS MPTFE A276-316 (1/4" to 1") A351-CF8M (1-1/4" to 3") 6. Gland 7. Stem 8. Jam nut 9. Body seal 10. Body 11. Belleville washer(s) A276-316 A276-316 SS PTFE (1-1/4" to 3") A351-CF8M SS OPTIONS AVAILABLE: (SUFFIX) -14-24-27-35-57- OPTION Vented Ball Graphite Packing Latch Lock Handle PTFE Seats Oxygen Cleaned SIZES 1/4" to 3" 1/4" to 3" 1/4" to 2" 1/4" to 3" 1/4" to 3" For Pressure/Temperature Ratings, Refer to Page M-12, Graph No. 14 (1/4" to 1") Refer to Page M-11, Graph No. 12 (1-1/4" to 2") Refer to Page M-10, Graph No. 8 (2-1/2" to 3") STAINLESS STEEL STD. PORT BALL VALVE WITH ISO MOUNTING PAD K (THRDS.) UNF B C D E F G H I J (FLATS) .37 1.03 2.06 1.40 .59 1.17 .28 .61 .20 .247/.249 3/8-24 .52 .37 1.03 2.06 1.40 .59 1.17 .28 .61 .20 .247/.249 3/8-24 .48 1/2" .50 1.12 2.25 1.54 .59 1.17 .28 .61 .17 .247/.249 3/8-24 .58 3/4" .68 1.50 3.00 2.16 .70 1.39 .28 .84 .28 .247/.249 3/8-24 1.26 1" NUMBER SIZE 76-AR1-64 1/4" 76-AR2-64 3/8" 76-AR3-64 76-AR4-64 76-AR5-64 A WT. .87 1.68 3.37 2.28 .70 1.39 .28 .84 .28 .247/.249 3/8-24 1.62 76-AR6-64 1-1/4" 1.00 1.98 3.97 3.16 .98 1.95 .34 1.16 .26 .370/.372 5/8-18 3.22 76-AR7-64 1-1/2" 1.25 2.18 4.37 3.16 .98 1.95 .34 1.16 .21 .370/.372 5/8-18 4.06 76-AR8-64 2" 1.50 2.75 5.50 3.37 .98 1.95 .34 1.16 .30 .370/.372 5/8-18 6.18 76-AR9-64 2-1/2" 2.00 3.12 6.25 3.85 .98 1.95 .34 1.16 .22 .370/.372 5/8-18 12.96 76-AR0-64 3" 2.50 3.37 6.75 4.18 .98 1.95 .34 1.16 .22 .370/.372 5/8-18 17.06 A-10 Back COPYRIGHT ©2003 CONBRACO IND., INC. – PRINTED IN U.S.A. Prev. Page | Next 76F-100 Series Stainless Steel Full Port Ball Valve Threaded, 1/4"-2" 1000 psig CWP Cold Non-Shock, 150 psig. (See referenced P/T chart) Saturated Steam, Vacuum Service to 29 inches Hg. Federal Specification: WW-V-35C, Type: II, Composition: SS, Style: 3. MSS SP-110; Ball Valves Threaded, Socket-Welding, Solder Joint, Grooved and Flared Ends. FEATURES • Investment cast components • RPTFE seats • MPTFE stuffing box ring • Blow-out-proof stem design • Adjustable packing gland • Meets NACE MR-01-75 • SS lever and nut • Available with SS latch lock lever (-27) STANDARD MATERIAL LIST 1. Stem packing 2. Stem bearing 3. Ball 4. Seat (2) 5. Retainer MPTFE RPTFE A276-316 SS RPTFE A276-316 SS (1/4" to 1") A351-CF8M (1-1/4" to 2") 6. Gland 7. Stem 8. Lever nut 9. Washer 10. Body 11. Lever and grip A276-316 SS A276-316 SS 304 SS 304 SS A351-CF8M SS w/vinyl OPTIONS AVAILABLE: (SUFFIX) -27- OPTION SS Latch Lock Lever & Nut SIZES 1/4" to 2" For Pressure/Temperature Ratings, Refer to Page M-10, Graph No. 8 STAINLESS STEEL FULL PORT BALL VALVE NUMBER SIZE A B C D E WT. 76F-101-01 1/4" .37 .95 1.91 1.60 3.85 .47 76F-102-01 3/8" .37 .95 1.91 1.60 3.85 .44 76F-103-01 1/2" .50 1.10 2.23 1.73 3.85 .55 76F-104-01 3/4" .81 1.56 3.06 2.13 4.75 1.54 76F-105-01 1" 1.00 1.71 3.45 2.66 5.40 2.81 1.25 2.05 4.10 2.88 5.40 4.12 76F-106-01 1-1/4" 76F-107-01 1-1/2" 1.50 2.33 4.66 3.30 7.75 5.74 76F-108-01 2.00 2.68 5.37 3.70 7.75 9.73 2" Back COPYRIGHT ©2003 CONBRACO IND., INC. – PRINTED IN U.S.A. Prev. Page | Next A-11 77C-100 Series Bronze Full Port Ball Valve (Threaded) Threaded, 600 psig CWP, 150 psig SWP. (See referenced P/T chart) Vacuum Service to 29 inches Hg. Federal Specification: WW-V-35C, Type: II, Composition: BZ, Style: 3. MSS SP-110 compliant. FEATURES • American Made Bronze Castings • Blow-out-proof stem design • Machined Solid Chrome-Plated Ball • Adjustable Packing • Multi-Fill PTFE Seats & Seals • Full Port Design Through 2" • Available With Stainless Steel Ball and Stem As 77C-140 Series or 77C-240 Series STANDARD MATERIAL LIST 1. Gland 2. Nut 3. Packing 4. Seat 5. Stem B16 Brass Zinc Plated Steel MPTFE MPTFE B16 Brass 6. Ball B16 Brass (Chromium Plated) B584 Bronze* B584 Bronze Zinc Plated Steel/Vinyl 7. Retainer 8. Body 9. Handle * 1/4" - 1/2" B16 Brass OPTIONS AVAILABLE: -07: Carbon Steel T-Handle -27: Stainless Steel Latch-Lock Handle -47: Stainless Steel Oval Locking Handle -04: Carbon Steel 2-1/4” Stem Extension -01: Carbon Steel Lever Handle For Pressure/Temperature Ratings, Refer to Page M-8, Graph No. 4 BRONZE FULL PORT BALL VALVE Number 77C-101 77C-102 77C-103 77C-104 77C-105 77C-106 77C-107 77C-108 Size 1/4 3/8 1/2 3/4 1 1-1/4 1-1/2 2 A 0.37 0.37 0.50 0.75 1.00 1.25 1.50 2.00 B 0.95 1.07 1.15 1.32 1.53 2.04 2.21 2.76 C 1.97 2.09 2.25 2.65 3.07 4.08 4.43 5.29 D 1.76 1.76 1.79 2.00 2.19 3.13 3.29 3.83 E 3.74 3.74 3.74 4.88 4.88 7.06 7.06 7.06 F 1.86 1.86 1.89 2.20 2.39 3.76 3.92 4.46 G 4.06 4.06 4.06 5.03 5.03 7.19 7.19 7.19 H 1.41 1.41 1.44 1.76 1.96 2.82 2.98 3.52 I 3.50 3.50 3.50 4.00 4.00 6.00 6.00 6.00 J 2.80 2.80 2.83 3.12 3.32 ---- K 3.12 3.12 3.12 3.12 3.12 ---- L 4.12 4.12 4.12 4.12 4.12 ---- M 3.86 3.86 3.89 4.10 4.29 5.23 5.39 5.93 Cv 4.5 7.2 15.5 35.6 68.1 125.0 177.0 389.0 Wt.** 0.6 0.6 0.6 1.1 1.8 4.4 5.9 11.4 **Weights are based on standard configuration 77C-10X-01. A-12 Back COPYRIGHT ©2003 CONBRACO IND., INC. – PRINTED IN U.S.A. Prev. Page | Next 77C-200 Series Bronze Full Port Ball Valve (Solder) Threaded, 600 psig CWP, 150 psig SWP. (See referenced P/T chart) Vacuum Service to 29 inches Hg. Federal Specification: WW-V-35C, Type: II, Composition: BZ, Style: 3. MSS SP-110 compliant. FEATURES • American Made Bronze Castings • Blow-out-proof stem design • Machined Solid Chrome-Plated Ball • Adjustable Packing • Multi-Fill PTFE Seats & Seals • Full Port Design Through 2" • Available With Stainless Steel Ball and Stem As 77C-140 Series or 77C-240 Series STANDARD MATERIAL LIST 1. Gland 2. Nut 3. Packing 4. Seat 5. Stem B16 Brass Zinc Plated Steel MPTFE MPTFE B16 Brass 6. Ball B16 Brass (Chromium Plated) B584 Bronze* B584 Bronze Zinc Plated Steel/Vinyl 7. Retainer 8. Body 9. Handle * 1/4" - 1/2" B16 Brass OPTIONS AVAILABLE: -07: Carbon Steel T-Handle -27: Stainless Steel Latch-Lock Handle -01: Carbon Steel Lever Handle -47: Stainless Steel Oval Locking Handle -04: Carbon Steel 2-1/4” Stem Extension For Pressure/Temperature Ratings, Refer to Page M-8, Graph No. 4 BRONZE FULL PORT BALL VALVE Number 77C-202 77C-203 77C-204 77C-205 77C-206 77C-207 77C-208 Size 3/8 1/2 3/4 1 1-1/4 1-1/2 2 A 0.37 0.50 0.75 1.00 1.25 1.50 2.00 B 0.93 1.15 1.39 1.69 2.08 2.33 2.95 C 1.84 2.31 2.79 3.38 4.16 4.66 5.84 D 1.76 1.79 2.00 2.19 3.13 3.29 3.83 E 3.74 3.74 4.88 4.88 7.06 7.06 7.06 F 1.86 1.89 2.20 2.39 3.76 3.92 4.46 G 4.06 4.06 5.03 5.03 7.19 7.19 7.19 H 1.41 1.44 1.76 1.96 2.82 2.98 3.52 I 3.50 3.50 4.00 4.00 6.00 6.00 6.00 J 2.80 2.83 3.12 3.32 ---- K 3.12 3.12 3.12 3.12 ---- L 4.12 4.12 4.12 4.12 ---- M 3.86 3.89 4.10 4.29 5.23 5.39 5.93 Cv 7.2 15.5 35.6 68.1 125.0 177.0 389.0 Wt.** 0.6 0.6 1.0 1.6 3.9 5.8 10.2 **Weights are based on standard configuration 77C-20X-01. Back COPYRIGHT ©2003 CONBRACO IND., INC. – PRINTED IN U.S.A. Prev. Page | Next A-13 77-100 Series Bronze Full Port Ball Valve Threaded, 600 psig WOG, Cold Non-Shock. 150 psig Saturated Steam. (See referenced P/T chart) Vacuum Service to 29 inches Hg. Federal Specification: WW-V-35C, Type: II, Composition: BZ, Style: 3. MSS SP-110; Ball Valves Threaded, Socket-Welding, Solder Joint, Grooved and Flared Ends. FEATURES • Chromium plated ball • RPTFE seats and stuffing box ring • Mounting pad for easy actuator mounting • Blow-out-proof stem design • Adjustable packing gland • Full port for full flow & min. pressure drop STANDARD MATERIAL LIST 1. Lever and grip 2. Stem packing 3. Stem bearing 4. Ball 5. Seat (2) 6. Retainer Steel, zinc plated w/vinyl RPTFE RPTFE B16, chrome plated RPTFE B16 (1/4" to 1") B584-C84400 (1-1/4" to 2-1/2") B16 B16 Steel, zinc plated 7. Gland nut 8. Stem 9. Lever nut 10. Body seal 11. Body VARIATIONS AVAILABLE: 77-140 Series (316 SS Ball & Stem) 77-150 Series (Original Balancing Stop) 77-190 Series (Locked Retainer) OPTIONS AVAILABLE: (SUFFIX) -02-03-04-05-07-08-10-14-15-16-17-18-20-21-24-27-28- BRONZE FULL PORT BALL VALVE NUMBER SIZE A B C D E F G Wt. 77-101-01 77-102-01 77-103-01 77-104-01 77-105-01 77-106-01 77-107-01 77-108-01 77-109-01 1/4" 3/8" 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" .43 .50 .50 .81 1.00 1.25 1.50 2.00 2.50 1.12 1.12 1.12 1.56 1.81 2.12 2.37 2.65 3.25 2.25 2.25 2.25 3.12 3.62 4.25 4.75 5.37 6.50 1.81 1.81 1.81 2.12 2.62 2.87 3.34 3.71 4.12 3.87 3.87 3.87 4.87 5.50 5.50 8.00 8.00 8.00 .50 .50 .50 .87 .93 .93 2.08 2.41 2.75 1.12 1.12 1.12 1.37 1.50 1.50 3.06 3.52 3.37 .79 .75 .69 1.83 3.32 5.05 6.71 11.75 17.25 A-14 Back PTFE (1-1/4" to 2-1/2") B584-C84400 -30-32-35-36-40-45-46-47-48-49-50-56-57-58-60-63-64-P01-T01- OPTION Stem Grounded 1-1/4" CS Stem Extension 2-1/4" CS Stem Extension Plain Ball Steel Tee Handle 90º Reversed Stem SS Lever & Nut Side Vented Ball (Uni-Directional) Wheel Handle, Steel Chain Lever - Vertical Rough Chrome Plated - Bronze Valves Plain Yellow Grip Slot Vented Ball UHMWPE Trim (Non-PTFE) Graphite Packing SS Latch-Lock Lever & Nut Mounting Pad Not Drilled & Tapped Cam-Lock and Grounded SS Tee Handle & Nut VTFE Trim SS High-Rise Round Handle & Nut Cyl-Loc and Grounded Less Lever & Nut Latch Lock Lever - Lock in Closed Position Only SS Oval Latch-Lock Handle & Nut SS Oval Handle (No Latch) & Nut Assembled Dry 2-1/4" CS Locking Stem Extension Multifill Seats & Packing Oxygen Cleaned Chain Lever - Horizontal Static Grounded Ball & Stem NPT x Solder/Socket Weld 250# Steam Trim BSPP (Parallel) Thread Connection BSPT (Tapered) Thread Connection SIZES 1/4" to 2-1/2" 1/4" to 2-1/2" 1/4" to 2-1/2" 1/4" to 2-1/2" 1/4" to 1-1/4" 1/4" to 2-1/2" 1/4" to 2-1/2" 1/4" to 2-1/2" 1/4" to 1-1/4" 3/4" to 2-1/2" 1/4" to 2-1/2" 1/4" to 2-1/2" 1/4" to 2-1/2" 1/4" to2-1/2" 1/4" to 2-1/2" 1/4" to 2-1/2" 1/4" to 2-1/2" 1/4" to 1-1/4" 1/4" to 1-1/4" 1/4" to 2-1/2" 1/4" to 1-1/4" 1/4" to 1-1/4" 1/4" to 2-1/2" 1/4" to 2-1/2" 1/4" to 3/4" 1/4" to 2" 1/4" to 2-1/2" 1/4" to 2-1/2" 1/4" to 2-1/2" 1/4" to 2-1/2" 3/4" to 2-1/2" 1/4" to 2-1/2" 1/4" to 2-1/2" 1/4" to 2-1/2" 1/4" to 2-1/2" 1/4" to 2-1/2" For Pressure/Temperature Ratings, Refer to Page M-8, Graph No. 4 COPYRIGHT ©2003 CONBRACO IND., INC. – PRINTED IN U.S.A. Prev. Page | Next 77-ARX Series Bronze Full Port Ball Valve with Actuator Ready ISO Mounting Pad Threaded, 600 psig WOG, Cold Non-Shock. 250 psig Saturated Steam. (See referenced P/T chart). Vacuum Service to 29 inches Hg. Federal Specification: WW-V-35C, Type: II, Composition: BZ, Style: 3. MSS SP-110; Ball Valves Threaded, Socket-Welding, Solder Joint, Grooved and Flared Ends. FEATURES • Multi-piece packing set • ISO 5211 mounting pad • Stainless ball & stem • Blow-out-proof stem design • Adjustable packing gland • Live loaded packing STANDARD MATERIAL LIST 1. Stem packing 2. Stem bearing 3. Ball 4. Seat (2) 5. Retainer MPTFE RPTFE 316 SS MPTFE B16 (1/4" to 1") B584-C84400 (1-1/4" to 2") 6. Gland 7. Stem 8. Jam nut 9. Body seal 10. Body 11. Belleville washer(s) B16 A276-316 SS PTFE (1-1/4" to 2") B584-C84400 SS OPTIONS AVAILABLE: (SUFFIX) -14-24-27-35-57- OPTION Vented Ball Graphite Packing Latch Lock Handle PTFE Seats Oxygen Cleaned SIZES 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" For Pressure/Temperature Ratings, Refer to Page M-8, Graph No. 4 BRONZE FULL PORT BALL VALVE WITH ISO MOUNTING PAD NUMBER SIZE 77-AR1-64 1/4" 77-AR2-64 3/8" 77-AR3-64 A I J (FLATS) K (THRDS.) UNF WT. B C D E F G H .37 1.12 2.25 1.40 .59 1.17 .28 .61 .18 .247/.249 3/8-24 .60 .37 1.12 2.25 1.40 .59 1.17 .28 .61 .18 .247/.249 3/8-24 .57 1/2" .50 1.12 2.25 1.54 .59 1.17 .28 .61 .16 .247/.249 3/8-24 .62 77-AR4-64 3/4" .86 1.68 3.12 2.28 .70 1.39 .28 .84 .26 .247/.249 3/8-24 1.76 77-AR5-64 3.44 1" 1.00 1.81 3.62 2.87 .98 1.95 .34 1.06 .31 .370/.372 5/8-18 77-AR7-64 1-1/2" 1.50 2.37 4.75 3.37 .98 1.95 .34 1.16 .20 .370/.372 5/8-18 6.25 77-AR8-64 2.00 2.65 5.37 3.86 .98 1.95 .34 1.16 .20 .370/.372 5/8-18 11.72 Back 2" COPYRIGHT ©2003 CONBRACO IND., INC. – PRINTED IN U.S.A. Prev. Page | Next A-15 77-200 Series Bronze Full Port Solder End Ball Valve Solder End, 600 psig WOG, Cold Non-Shock. 150 psig Saturated Steam. (See referenced P/T chart) Vacuum Service to 29 inches Hg. Federal Specification: WW-V-35C, Type: II, Composition: BZ, Style: 3. MSS SP-110; Ball Valves Threaded, Socket-Welding, Solder Joint, Grooved and Flared Ends. FEATURES • Chromium plated ball • RPTFE seats and stuffing box ring • Full port for full flow & min. pressure drop • Blow-out-proof stem design • Adjustable packing gland STANDARD MATERIAL LIST 1. Lever and grip 2. Stem packing 3. Stem bearing 4. Ball 5. Seat (2) 6. Retainer Steel, zinc plated w/vinyl RPTFE RPTFE B16 chrome plated RPTFE B16 (3/4" to 1") B584-C84400 (1-1/4" to 2-1/2") VARIATIONS AVAILABLE: 77-240 Series (316 SS Ball & Stem) 77-250 Series (Balancing Stop) The 77-200 is designed to be soft soldered into lines without disassembly. This allows a tested valve to be installed without disturbing the seats and seals in any way. Soldering temperature not to exceed 500ºF. 7. Gland nut 8. Stem 9. Lever nut 10. Body seal (1-1/4" to 2-1/2") 11. Body B16 B16 Steel, zinc plated PTFE B584-C84400 OPTIONS AVAILABLE: (SUFFIX) -02-03-04-05-07-08-10-14-15-16-17-20-24-27-30-32-35-40-45-46-47-48-49-50-56-57-58-60-63- OPTION Stem Grounded 1-1/4" CS Stem Extension 2-1/4" CS Stem Extension Plain Ball Steel Tee Handle 90º Reversed Stem SS Lever & Nut Side Vented Ball (Uni-Directional) Wheel Handle, Steel Chain Lever - Vertical Rough Chrome Plated - Bronze Valves Slot Vented Ball Graphite Packing SS Latch-Lock Lever & Nut Cam-Lock and Grounded SS Tee Handle & Nut VTFE Trim Cyl-Loc and Grounded Less Lever & Nut Latch Lock Lever - Lock in Closed Position Only SS Oval Latch-Lock Handle & Nut SS Oval Handle (No Latch) & Nut Assembled Dry 2-1/4" CS Locking Stem Extension Multifill Seats & Packing Oxygen Cleaned Chain Lever - Horizontal Static Grounded Ball & Stem NPT x Solder/Socket Weld SIZES 3/4" to 2-1/2" 3/4" to 2-1/2" 3/4" to 2-1/2" 3/4" to 2-1/2" 3/4" to 1-1/4" 3/4" to 2-1/2" 3/4" to 2-1/2" 3/4" to 2-1/2" 3/4" to 1-1/4" 3/4" to 2-1/2" 3/4" to 2-1/2" 3/4" to 2-1/2" 3/4" to 2-1/2" 3/4" to 2-1/2" 3/4" to 1-1/4" 3/4" to 1-1/4" 3/4" to 2-1/2" 3/4" to 1-1/4" 3/4" to 2-1/2" 3/4" to 2-1/2" 3/4" ONLY 3/4" to 2-1/2" 3/4" to 2-1/2" 3/4" to 2-1/2" 3/4" to 2-1/2" 3/4" to 2-1/2" 3/4" to 2-1/2" 3/4" to 2-1/2" 3/4" to 2-1/2" BRONZE FULL PORT SOLDER END BALL VALVE NUMBER 77-204-01 77-205-01 77-206-01 77-207-01 77-208-01 77-209-01 A-16 SIZE 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" Back A .81 1.00 1.25 1.50 2.00 2.50 B 2.12 2.33 2.60 3.00 3.62 3.93 C 4.12 4.64 5.15 6.00 7.24 7.87 D 2.12 2.62 2.87 3.34 3.71 4.12 E 4.87 5.50 5.50 8.00 8.00 8.00 F G .878 .75 1.129 .90 1.378 .96 1.629 1.09 2.129 1.34 2.630 1.48 Wt. 1.65 2.99 4.55 6.04 10.58 15.53 For Pressure/Temperature Ratings, Refer to Page M-8, Graph No. 4 COPYRIGHT ©2003 CONBRACO IND., INC. – PRINTED IN U.S.A. Prev. Page | Next 77-900 Series Bronze Full Port SAE Straight Thread Ball Valve Straight Threads, 600 psig WOG, Cold Non-Shock. 150 psig Saturated Steam. (See referenced P/T chart) Vacuum Service to 29 inches Hg. Federal Specification: WW-V-35C, Type: II, Composition: BZ, Style: 3. MSS SP-110; Ball Valves Threaded, Socket-Welding, Solder Joint, Grooved and Flared Ends. FEATURES • Chromium plated ball • RPTFE seats and stuffing box ring • Mounting pad for easy actuator mounting • Straight thread w/O-Ring boss connection • Blow-out-proof stem design • Adjustable packing gland • Full port for full flow & min. pressure drop • SAE J512/J514 Straight Thread O-Ring Boss STANDARD MATERIAL LIST 1. Lever and grip 2. Stem packing 3. Stem bearing 4. Ball 5. Seat (2) 6. Retainer Steel, zinc plated w/vinyl RPTFE RPTFE Brass, chrome plated RPTFE B16 (1/4" to 1") B584-C84400 (1-1/4" to 2") 7. Gland nut 8. Stem 9. Lever nut 10. Body seal 11. Body B16 B16 Steel, zinc plated PTFE (1-1/4" to 2") B584-C84400 OPTIONS AVAILABLE: (SUFFIX) -02-03-04-07-08-10-15-17-24-27-30-32-35-46-48-50- OPTION SIZES Stem Grounded 1/4" to 2" 1-1/4" CS Stem Extension 1/4" to 2" 2-1/4" CS Stem Extension 1/4" to 2" Steel Tee Handle 1/4" to 2" 90º Reversed Stem 1/4" to 2" SS Lever & Nut 1/4" to 2" Wheel Handle, Steel 1/4" to 2" Rough Chrome Plated - Bronze Valves 1/4" to 2" Graphite Packing 1/4" to 2" SS Latch-Lock Lever & Nut 1/4" to 2" Cam-Lock and Grounded 1/4" to 2" SS Tee Handle & Nut 1/4" to 2" VTFE Trim 1/4" to 2" Latch Lock Lever - Lock in Closed Position Only 1/4" to 3" SS Oval Handle (No Latch) & Nut 1/4" to 2" 2-1/4" CS Locking Stem Extension 1/4" to 2" BRONZE FULL PORT SAE O-RING BOSS BALL VALVE NUMBER 77-901-01 77-902-01 77-903-01 77-904-01 77-905-01 77-906-01 77-907-01 77-908-01 NOM. TUBE SIZE O.D. 1/4" 7/16"-20 3/8" 9/16"-18 1/2" 3/4"-16 3/4" 1-1/16"-12 1" 1-5/16"-12 1-1/4" 1-5/8"-12 1-1/2" 1-7/8"-12 2" 2-1/2"-12 Back A B C D E F G Wt. .43 .50 .50 .81 1.00 1.25 1.50 2.00 1.12 1.12 1.12 1.56 1.81 2.12 2.37 2.65 2.25 2.25 2.25 3.12 3.62 4.25 4.75 5.37 1.81 1.81 1.81 2.12 2.62 2.87 3.34 3.71 3.87 3.87 3.87 4.87 5.50 5.50 8.00 8.00 .50 .50 .50 .87 .93 .93 2.09 2.41 1.12 1.12 1.12 1.37 1.50 1.50 3.06 3.52 .79 .75 .69 1.83 3.32 5.05 6.71 11.75 For Pressure/Temperature Ratings, Refer to Page M-8, Graph No. 4 COPYRIGHT ©2003 CONBRACO IND., INC. – PRINTED IN U.S.A. Prev. Page | Next A-17 89-100 Series Carbon Steel Ball Valve NPT Threaded, 1/4" to 1" 2000 psig WOG, 1-1/4" to 2" 1500 psig WOG, 2-1/2" to 3" 1000 psig WOG. (See referenced P/T chart) Cold Non-Shock. 150 psig Saturated Steam. Vacuum Service to 29 inches Hg. Federal Specification: WW-V-35C, Type: II, Composition: CS, Style: 3. MSS SP-110; Ball Valves Threaded, Socket-Welding, Solder Joint, Grooved and Flared Ends. FEATURES • Investment cast components • Blow-out-proof stem design • RPTFE seats and stuffing box ring • Adjustable packing gland • Mounting pad for easy actuator mounting • Nitride corrosion protection • (-24) Certified to API 607, 4th, Edition, Class 600 burn STANDARD MATERIAL LIST 1. Lever and grip 2. Stem packing 3. Stem bearing 4. Ball 5. Seat (2) 6. Retainer Steel, zinc plated w/vinyl RPTFE RPTFE A108-CS chrome plated RPTFE A108 CS (1/4" to 1") A216-WCB (1-1/4" to 3") A108-CS A108-CS 7. Gland nut 8. Stem CARBON STEEL BALL VALVE NUMBER 89-101-01 89-102-01 89-103-01 89-104-01 89-105-01 89-106-01 89-107-01 89-108-01 89-109-01 89-100-01 A-18 SIZE 1/4" 3/8" 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3" Back A .37 .37 .50 .68 .87 1.00 1.25 1.50 2.50 2.50 B 1.03 1.03 1.12 1.50 1.68 2.00 2.18 2.75 3.37 3.37 C 2.06 2.06 2.25 3.00 3.37 4.00 4.37 5.50 6.75 6.75 D 1.75 1.75 1.81 2.12 2.25 2.62 3.05 3.24 4.05 4.12 E 3.87 3.87 3.87 4.87 4.87 5.50 8.00 8.00 8.00 8.00 F .50 .50 .50 .87 .87 .93 .93 .93 2.75 2.75 G 1.12 1.12 1.12 1.37 1.37 1.50 1.50 1.50 3.37 3.37 Wt. .58 .54 .63 1.27 1.63 3.06 3.98 5.99 15.57 16.79 9. Lever nut 10. Body seal 11. Body Steel, zinc plated PTFE (1-1/4" to 3") A216-WCB VARIATIONS AVAILABLE: 89-140 Series (316 SS Ball & Stem) OPTIONS AVAILABLE: (SUFFIX) -02-03-04-07-08-10-14-15-16-18-19-24-27-30-32-35-39-40-44-45-46-47-48-50-56-58-60-64-P01-T01- OPTION SIZES Stem Grounded 1/4" to 3" 1-1/4" CS Stem Extension 1/4" to 3" 2-1/4" CS Stem Extension 1/4" to 3" Steel Tee Handle 1/4" to 2" 90º Reversed Stem 1/4" to 3" SS Lever & Nut 1/4" to 3" Side Vented Ball (Uni-Directional) 1/4" to 3" Wheel Handle, Steel 1/4" to 2" Chain Lever - Vertical 3/4" to 2" Plain Yellow Grip 1/4" to 3" Lock Plate 1/4" to 2" Graphite Packing 1/4" to 3" SS Latch-Lock Lever & Nut 1/4" to 3" Cam-Lock and Grounded 1/4" to 2" SS Tee Handle & Nut 1/4" to 2" VTFE Trim 1/4" to 3" SS Hi-Rise Locking Wheel Handle, SS Nut 1/4" to 2" Cyl-Loc and Grounded 1/4" to 2" Seal Welded 1/4" to 2" Less Lever & Nut 1/4" to 3" Latch Lock Lever - Lock in Closed Position Only 1/4" to 3" SS Oval Latch-Lock Handle & Nut 1/4" to 1" SS Oval Handle (No Latch) & Nut 1/4" to 2" 2-1/4" CS Locking Stem Extension 1/4" to 3" Multifill Seats & Packing 1/4" to 3" Chain Lever - Horizontal 3/4" to 2" Static Grounded Ball & Stem 1/4" to 3" 250# Steam Trim 1/4" to 3" BSPP (Parallel) Thread Connection 1/4" to 3" BSPT (Tapered) Thread Connection 1/4" to 3" For Pressure/Temperature Ratings, Refer to Page M-12, Graph No. 13 (1/4" to 1") Refer to Page M-11, Graph No. 11 (1-1/4" to 2") Refer to Page M-10, Graph No. 7 (2-1/2" to 3") COPYRIGHT ©2003 CONBRACO IND., INC. – PRINTED IN U.S.A. Prev. Page | Next 89-ARX Series Carbon Steel Std. Port Ball Valve with Actuator Ready ISO Mounting Pad Threaded, 1/4"-1" 2000 psig WOG, 1-1/4"-2" 1500 psig WOG, 2-1/2"-3" 1000 psig WOG. (See referenced P/T chart) 1000 psig WOG, Cold Non-Shock. 250 psig Saturated Steam. Vacuum Service to 29 inches Hg. Federal Specification: WW-V-35C, Type: II, Composition: CS, Style: 3. MSS SP-110; Ball Valves Threaded, Socket-Welding, Solder Joint, Grooved and Flared Ends. FEATURES • Multi-piece packing set • ISO 5211 mounting pad • Stainless ball & stem • Blow-out-proof stem design • Adjustable packing gland • Live loaded packing STANDARD MATERIAL LIST 1. Stem packing 2. Stem bearing 3. Ball 4. Seat (2) 5. Retainer 6. Gland MPTFE RPTFE 316 SS MPTFE A108-CS (1/4" to 3") A276-316 7. Stem 8. Jam nut 9. Body seal 10. Body 11. Belleville washer(s) A276-316 SS PTFE (1-1/4" to 3") A216-WCB SS OPTIONS AVAILABLE: (SUFFIX) -14-24-27-35-67- OPTION Side Vented Ball (Uni-Directional) Graphite Packing Latch Lock Handle PTFE Seats Cleaned for Industrial Gases - CS Valves SIZES 1/4" to 3" 1/4" to 3" 1/4" to 2" 1/4" to 3" 1/4" to 3" For Pressure/Temperature Ratings, Refer to Page M-12, Graph No. 13 (1/4" to 1") Refer to Page M-11, Graph No. 11 (1-1/4" to 2") Refer to Page M-10, Graph No. 7 (2-1/2" to 3") CARBON STEEL STD. PORT BALL VALVE WITH ISO MOUNTING PAD NUMBER SIZE 89-AR1-64 1/4" 89-AR2-64 3/8" 89-AR3-64 A I J (FLATS) K (THRDS.) UNF WT. B C D E F G H .37 1.03 2.06 1.40 .59 1.17 .28 .61 .20 .247/.249 3/8-24 .52 .37 1.03 2.06 1.40 .59 1.17 .28 .61 .20 .247/.249 3/8-24 .49 1/2" .50 1.12 2.25 1.54 .59 1.17 .28 .61 .17 .247/.249 3/8-24 .58 89-AR4-64 3/4" .68 1.50 3.00 2.16 .70 1.39 .28 .84 .28 .247/.249 3/8-24 1.26 89-AR5-64 1" .87 1.68 3.37 2.28 .70 1.39 .28 .84 .28 .247/.249 3/8-24 1.62 89-AR6-64 1-1/4" 1.00 1.98 3.97 3.16 .98 1.95 .34 1.16 .26 .370/.372 5/8-18 3.22 89-AR7-64 1-1/2" 1.25 2.18 4.37 3.16 .98 1.95 .34 1.16 .21 .370/.372 5/8-18 4.06 89-AR8-64 1.50 2.75 5.50 3.37 .98 1.95 .34 1.16 .30 .370/.372 5/8-18 6.18 2" 89-AR9-64 2-1/2" 2.00 3.12 6.25 3.85 .98 1.95 .34 1.16 .22 .370/.372 5/8-18 13.06 89-AR0-64 2.50 3.37 6.75 4.18 .98 1.95 .34 1.16 .22 .370/.372 5/8-18 17.06 Back 3" COPYRIGHT ©2003 CONBRACO IND., INC. – PRINTED IN U.S.A. Prev. Page | Next A-19 399-100 Series Alloy-20 Ball Valve Threaded, 1/4" to 1" 2000 psig WOG, 1-1/4" to 2" 1500 psig WOG. Cold Non-Shock. (See referenced P/T chart) 150 psig Saturated Steam. Vacuum Service to 29 inches Hg. Federal Specification: WW-V-35C, Type: II, Composition: SS, Style: 3. MSS SP-110; Ball Valves, Threaded, Socket-Welding, Solder Joint, Grooved and Flared Ends. FEATURES • Investment cast components • RPTFE seats and stuffing box ring • Mounting pad for easy actuator mounting • (-24) Certified to API standard 607, 4th Edition, Class 600 burn • Blow-out-proof stem design • Adjustable packing gland • Meets NACE MR-01-75 STANDARD MATERIAL LIST 1. Lever and grip 2. Stem packing 3. Stem bearing 4. Ball 5. Seat (2) 6. Retainer 304 SS w/vinyl RPTFE RPTFE B463-2OCB-3 RPTFE B473-N08020 (1/4" to 1") A351-CN7M (1-1/4" to 2") 7. Gland nut 8. Stem 9. Lever nut 10. Body seal 11. Body 316 SS B473-N08020 304 SS PTFE (1-1/4" to 2") A351-CN7M OPTIONS AVAILABLE: (SUFFIX) -02-03-04-07-08-14-15-16-18-19-21-24-27-28-30-32-35-40-45-46-47-48-49-50-56-57-58-60-64-P01-T01- ALLOY-20 BALL VALVE NUMBER SIZE 399-101-01 1/4" 399-102-01 3/8" 399-103-01 1/2" 399-104-01 3/4" 399-105-01 1" 399-106-01 1-1/4" 399-107-01 1-1/2" 399-108-01 2" A-20 Back A .37 .37 .50 .68 .87 1.00 1.25 1.50 B 1.03 1.03 1.12 1.50 1.68 2.00 2.18 2.34 C 2.06 2.06 2.25 3.00 3.37 4.00 4.37 4.68 D 1.75 1.75 1.81 2.12 2.25 2.62 2.87 3.06 E 3.87 3.87 3.87 4.87 4.87 5.50 8.00 8.00 F .50 .50 .50 .87 .87 .93 .93 .93 G 1.12 1.12 1.12 1.37 1.37 1.50 1.50 1.50 Wt. .58 .54 .63 1.27 1.63 3.06 4.04 6.05 OPTION SIZES Stem Grounded 1/4" to 2" 1-1/4" CS Stem Extension 1/4" to 2" 2-1/4" CS Stem Extension 1/4" to 2" Steel Tee Handle 1/4" to 2" 90º Reversed Stem 1/4" to 2" Side Vented Ball (Uni-Directional) 1/4" to 2" Wheel Handle, Steel 1/4" to 2" Chain Lever - Vertical 3/4" to 2" Plain Yellow Grip 1/4" to 2" Lock Plate 1/4" to 2" UHMWPE Trim (Non-PTFE) 1/4" to 2" Graphite Packing 1/4" to 2" SS Latch-Lock Lever & Nut 1/4" to 2" Mounting Pad Not Drilled 1/4" to 2" & Tapped Cam-Lock and Grounded 1/4" to 2" SS Tee Handle & Nut 1/4" to 2" VTFE Trim 1/4" to 2" Cyl-Loc and Grounded 1/4" to 2" Less Lever & Nut 1/4" to 2" Latch Lock Lever - Lock in Closed Position Only 1/4" to 2" SS Oval Latch-Lock Handle & Nut 1/4" to 1" SS Oval Handle (No Latch) & Nut 1/4" to 2" Assembled Dry 1/4" to 2" 2-1/4" CS Locking Stem Extension 1/4" to 2" Multifill Seats & Packing 1/4" to 2" Oxygen Cleaned 1/4" to 2" Chain Lever - Horizontal 3/4" to 2" Static Grounded Ball & Stem 1/4" to 2" 250# Steam Trim 1/4" to 2" BSPP (Parallel) Thread Connection 1/4" to 2" BSPT (Tapered) Thread Connection 1/4" to 2" For Pressure/Temperature Ratings, Refer to Page M-15, Graph No. 20 (1/4" to 1") Refer to Page M-15, Graph No. 19 (1-1/4" to 2") COPYRIGHT ©2003 CONBRACO IND., INC. – PRINTED IN U.S.A. Prev. Page | Next SECTION B CONTENTS THREE PIECE BALL VALVES DESCRIPTION PAGE 82-100 Series, Threaded Full Port Bronze B-1 82-200 Series, Solder Full Port Bronze B-2 83R-100 Series, Actuator Ready Threaded Full Port Carbon Steel B-3 83R-200 Series, Actuator Ready Socket Weld Full Port Carbon Steel B-4 83R-700 Series, Actuator Ready Butt-Weld Full Port Carbon Steel B-5 85R-100 Series, Actuator Ready Threaded Stainless Steel B-6 85R-200 Series, Actuator Ready Socket Weld Stainless Steel B-7 86R-100 Series, Actuator Ready Threaded Full Port Stainless Steel B-8 86R-200 Series, Actuator Ready Socket Weld Full Port Stainless Steel B-9 86R-700 Series, Actuator Ready Butt-Weld Full Port Stainless Steel B-10 401R-100 Series, Actuator Ready Threaded Full Port Alloy 20 B-11 401R-200 Series, Actuator Ready Socket Weld Full Port Alloy 20 B-12 83-300 Series, Threaded High Pressure Carbon Steel B-13 83-400 Series, Socket Weld High Pressure Carbon Steel B-14 83-500 Series, Threaded Full Port High Pressure Carbon Steel B-15 83-600 Series, Socket Weld Full Port High Pressure Carbon Steel B-16 85-100 Series, Threaded Stainless Steel B-17 85-200 Series, Socket Weld Stainless Steel B-18 86-500 Series, Threaded Full Port High Pressure Stainless Steel B-19 86-600 Series, Socket Weld Full Port High Pressure Stainless Steel B-20 86-900 Series, Butt-Weld Full Port High Pressure Stainless Steel B-21 Back Prev. Page | Next 82-100 Series Bronze 3-Piece Full Port Ball Valve Threaded, 600 psig WOG, Cold Non-Shock. 150 psig Saturated Steam. Vacuum Service to 29 inches Hg. Federal Specification: WW-V-35C, Type: II, Composition: BZ, Style: 1. MSS SP-110; Ball Valve Threaded, Socket-Welding, Solder Joint, Grooved and Flared Ends. FEATURES • Full port configuration • RPTFE seats and seals • In-line repairable • Blow-out-proof stem design • Adjustable packing gland STANDARD MATERIAL LIST 1. Lever and grip 2. Stem packing 3. Stem bearing 4. Ball 5. Seat (2) 6. End cap (2) Steel, zinc plated w/vinyl 10. Body bolt RPTFE 11. Hex nut RPTFE 12. Body B16, chrome plated (except 3” & 4”) RPTFE B16 (1/4” to 3/8”) B584-C84400 (1/2” to 4”) B16 (SUFFIX) OPTION B16 (except 3” & 4”) -02Static Grounded Steel, zinc plated OPTIONS AVAILABLE: 7. Gland nut 8. Stem 9. Lever nut VARIATIONS AVAILABLE: 82-140 Series (316 SS Ball & Stem) 82-150 Series (Original Balancing Stop) BRONZE 3-PIECE FULL PORT BALL VALVE NUMBER 82-101-01 82-102-01 82-103-01 82-104-01 82-105-01 82-106-01 82-107-01 82-108-01 82-109-01 82-140-01 82-14A-01 SIZE 1/4" 3/8" 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3" 4" Back Steel, zinc plated Steel, zinc plated B584-C84400 A .43 .50 .62 .81 1.00 1.25 1.50 2.00 2.50 3.00 4.00 B 1.28 1.28 1.40 1.71 1.93 2.37 2.62 3.01 3.62 4.00 5.50 C 2.56 2.56 2.81 3.43 3.87 4.75 5.25 6.03 7.25 8.00 11.00 D 1.81 1.81 1.93 2.18 2.62 2.87 3.37 3.68 5.14 6.77 8.26 E 3.87 3.87 4.87 4.87 5.50 5.50 8.00 8.00 9.75 18.00 18.00 Wt. 1.02 1.04 1.55 2.27 3.28 5.62 8.07 14.42 26.61 42.24 88.40 -03-04-05-07-08-10-14-15-16-18-19-20-21-23-24-27-30-32-35-39-40-45-46-47-48-49-50-56-57-58-59-60-63-P01-T01- SIZES 1/4” to 4” 1-1/4” Stem Extension 1/4” to 2” 2-1/4” Stem Extension 1/4” to 2” Plain Ball 1/4” to 4” Tee Handle 1/4” to 2” 90º Reversed Stem 1/4” to 4” SS Lever & Nut 1/4” to 4” Vented Ball (see page J-2) 1/4” to 4” Round Handle 1/4” to 2” Vertical Chain Lever 1/2” to 2” Plain Yellow Grip 1/4” to 2” Lock Plate 1/4” to 4” Slot Vented Ball 1/4” to 4” UHMWPE Seats 1/4” to 4” Tank Flange 2” ONLY Graphite Stem Packing 1/4” to 4” Latch Lock Lever 1/2” to 2” CamLock Handle 1/4” to 1-1/4” SS Tee Handle & Nut 1/4” to 2” PTFE Trim 1/4” to 4” SS Hi-Rise Locking Wheel Handle, SS Nut 1/4” to 1-1/4” Cyl-Loc & Grounded 1/4” to 1/2” Less Lever & Nut 1/4” to 4” Latch-Lock Lever - Lock in Closed Position Only 1/2” to 2” SS Oval Latch-Lock Handle & Nut 1/4” to 3/4” SS Oval Handle (No Latch) & Nut 1/4” to 2” Assembled Dry 1/4” to 4” 2-1/4” CS Locking Stem Extension 1/4” to 2” Multifill Seats & Graphite Packing 1/4” - 4” Oxygen Cleaned 1/4” to 4” Chain Lever - Horizontal 1/2” to 2” SS External Trim - 3-pc. Valves 1/4” to 4” Grounded Ball & Stem 1/4” to 4” NPT x Solder/Socket Weld 3/8” to 4” BSPP (Parallel) Thread Connection 1/4” to 4” BSPT (Tapered) Thread Connection 1/4” to 4” For Pressure/Temperature Ratings, Refer to Page M-8, Graph No. 4 COPYRIGHT ©2003 CONBRACO IND., INC. – PRINTED IN U.S.A. Prev. Page | Next B-1 82-200 Series Bronze 3-Piece Full Port Solder End Ball Valve Solder End, 600 psig WOG, Cold Non-Shock. 150 psig Saturated Steam. Vacuum Service to 29 inches Hg. Federal Specification: WW-V-35B, Type: II, Composition: BZ, Style: 1. Designed For Soft Solder or Brazed Installation. MSS SP-110; Ball Valve Threaded, Socket-Welding, Solder Joint, Grooved and Flared Ends. FEATURES • Full port configuration • RPTFE seats and seals • In-line repairable • Blow-out-proof stem design • Adjustable packing gland STANDARD MATERIAL LIST 1. Lever and grip 2. Stem packing 3. Stem bearing 4. Ball 5. Seat (2) 6. End cap (2) Steel, zinc plated w/vinyl 10. Body bolt RPTFE 11. Hex nut RPTFE 12. Body B16, chrome plated (except 3” & 4") RPTFE B16 (3/8") B584-C84400 (1/2" to 4") B16 (SUFFIX) OPTION B16 (except 3" & 4") -02Static Grounded Steel, zinc plated -031-1/4” Stem Extension OPTIONS AVAILABLE: 7. Gland nut 8. Stem 9. Lever nut VARIATIONS AVAILABLE: 82-240 Series (316 SS Ball & Stem) BRONZE 3-PIECE FULL PORT BALL VALVE NUMBER 82-202-01 82-203-01 82-204-01 82-205-01 82-206-01 82-207-01 82-208-01 82-209-01 82-240-01 82-24A-01 B-2 SIZE 3/8” 1/2” 3/4” 1” 1-1/4” 1-1/2” 2” 2-1/2” 3” 4” Back A .50 .62 .81 1.00 1.25 1.50 2.00 2.50 3.00 4.00 Steel, zinc plated Steel, zinc plated B584-C84400 B 1.28 1.40 1.71 1.93 2.37 2.60 3.01 3.62 4.00 5.50 C 2.56 2.81 3.43 3.87 4.75 5.25 6.03 7.25 8.00 11.00 D E F 1.81 3.87 .505 1.93 4.87 .630 2.18 4.87 .880 2.62 5.50 1.130 2.87 5.50 1.380 3.37 8.00 1.630 3.68 8.00 2.130 5.14 9.38 2.630 6.77 18.00 3.130 8.26 18.00 4.130 G .37 .50 .75 .90 .96 1.09 1.34 1.47 1.66 2.16 Wt. .99 1.46 2.07 3.03 5.02 7.91 13.50 26.61 42.24 88.40 -04-05-07-08-10-14-15-16-18-19-20-21-23-24-27-30-32-35-39-40-45-46-47-48-49-50-56-57-58-59-60- SIZES 3/8” to 4” 3/8” to 2” 2-1/4” Stem Extension 3/8” to 2” Plain Ball 3/8” to 4” Tee Handle 3/8” to 2” 90º Reversed Stem 3/8” to 4” SS Lever & Nut 3/8” to 4” Vented Ball (see page J-2) 3/8” to 4” Round Handle 3/8” to 2” Vertical Chain Lever 1/2” to 2” Plain Yellow Grip 3/8” to 2” Lock Plate 3/8” to 4” Slot Vented Ball 3/8” to 4” UHMWPE Seats 3/8” to 4” Tank Flange 2” ONLY Graphite Stem Packing 3/8” to 4” Latch Lock Lever 1/2” to 2” CamLock Handle 3/8” to 1-1/4” SS Tee Handle & Nut 3/8” to 2” VTFE Trim 3/8” to 4” SS Hi-Rise Locking Wheel Handle, SS Nut 3/8” to 1-1/4” Cyl-Loc & Grounded 3/8” to 1/2” Less Lever & Nut 3/8” to 4” Latch-Lock Lever - Lock in Closed Position Only 1/2” to 2” SS Oval Latch-Lock Handle & Nut 3/8” to 3/4” SS Oval Handle (No Latch) & Nut 1/4” to 2” Assembled Dry 3/8” to 4” 2-1/4” CS Locking Stem Extension 3/8” to 2” Multifill Seats & Graphite Packing 3/8” to 4” Oxygen Cleaned 3/8” to 4” Chain Lever - Horizontal 1/2” to 2” SS External Trim - 3-pc. Valves 3/8” to 4” Grounded Ball & Stem 3/8” to 4” For Pressure/Temperature Ratings, Refer to Page M-8, Graph No. 4 COPYRIGHT ©2003 CONBRACO IND., INC. – PRINTED IN U.S.A. Prev. Page | Next 83R-100 Series Carbon Steel 3-Piece Full Port Ball Valve With Actuator Ready ISO Mounting Pad Full Port Threaded, 1/4" to 1" 1000 psig WOG, 1-1/4" to 3" 800 psig WOG, Cold Non-Shock. 150 psig Saturated Steam. Vacuum Service to 29 inches Hg. Federal Specification: WW-V-35C, Type: II, Composition: CS, Style: 1. MSS SP-110; Ball Valve Threaded, Socket-Welding, Solder Joint, Grooved and Flared Ends. FEATURES • Multi-piece packing set • ISO 5211 mounting pad • Blow-out-proof stem design • In-line repairable • Adjustable packing gland • Investment cast components • RPTFE seats and seals • Full port configuration STANDARD MATERIAL LIST 1. Stem 2. Jam nut 3. Low profile nut 4. Gland 5. Stem bearing 6. End cap (2) A108-CS Steel, zinc plate 316 SS A276-316 RPTFE A108-CS (1/4” to 1”) A216-WCB (1-1/4” to 3”) 7. Hex nut (4) 8. Seat (2) 9. Ball 10. Body bolt (4) 11. Stem packing 12. Body 13. Lock tab washer 14. Lever and grip Stl-gr. 8-zinc plt RPTFE A108-CS chrome plate Stl-gr. 8-zinc plt MPTFE ASTM A216-WCB 304 SS Stl-zinc plt-w/vinyl VARIATIONS AVAILABLE: • 83R-140 Series (316 SS Ball & Stem) • Meets NACE MR-01-75 (1-1/4” to 2”) OPTIONS AVAILABLE: (SUFFIX) -02-03-04-08-10-14-18-21-24-27-35-36-39-56-59-60-65-P01-T01-AR-WB- For Pressure/Temperature Ratings, Refer to Page M-10, Graph No. 7 OPTION Static Grounded 1-1/4” Stem Extension 2-1/4” Stem Extension 90º Reversed Stem SS Lever & Nut Vented Ball Plain Yellow Grip UHMWPE Seats (Non-PTFE) Graphite Stem Packing Latch Lock Lever VTFE Trim SS Round Handle SS Hi-Rise Locking Wheel Handle, SS Nut Multifill Seats & Graphite Packing SS External Trim - 3-pc. Valves Grounded Ball & Stem Multifill Seats & Graphite Packing BSPP (Parallel) Thread Connection BSPT (Tapered) Thread Connection Less Handle & Stop-Add Belleville Washers With Lever & Belleville Washers SIZES 1/4” to 3” 1/4” to 2” 1/4” to 2” 1/4” to 2” 1/4” to 3” 1/4” to 3” 1/4” to 3” 1/4” to 3” 1/4” to 3” 1/2” to 2” 1/4” to 3” 1/4” to 2” 1/4” to 2” 1/4” to 3” 1/4” to 3” 1/4” to 3” 1/4” to 3” 1/4” to 2” 1/4” to 2” 1/4” to 3” 1/4” to 3” CARBON STEEL 3-PIECE FULL PORT BALL VALVE WITH ISO MOUNTING PAD NUMBER SIZE 83R-101-01 1/4" 83R-102-01 3/8" 83R-103-01 1/2" 83R-104-01 3/4" 83R-105-01 1" 83R-106-01 1-1/4" 83R-107-01 1-1/2" 83R-108-01 2" 83R-100-01 3" Back A B C .43 .50 .62 .81 1.00 1.25 1.50 2.00 3.00 1.40 1.40 1.40 1.71 1.92 2.35 2.59 3.01 4.00 2.81 2.81 2.81 3.42 3.85 4.70 5.18 6.03 8.00 D E 2.05 4.18 2.05 4.18 2.05 4.18 2.42 4.93 2.54 4.93 3.16 8.06 3.49 8.06 3.95 8.06 6.44 19.13 F G H I J (FLATS) .59 .59 .59 .70 .70 .98 .98 .98 1.42 1.17 1.17 1.17 1.39 1.39 1.95 1.95 1.95 2.84 .61 .61 .61 .84 .84 1.16 1.16 1.16 1.69 .28 .28 .28 .28 .28 .34 .34 .34 3/8-16 .247/.249 .247/.249 .247/.249 .247/.249 .247/.249 .370/.372 .370/.372 .370/.372 .725 COPYRIGHT ©2003 CONBRACO IND., INC. – PRINTED IN U.S.A. K (THRDS.) UNF 3/8-24 3/8-24 3/8-24 3/8-24 3/8-24 5/8-18 5/8-18 5/8-18 N/A N 3.28 3.28 3.28 3.52 3.64 4.06 4.38 4.85 8.14 Prev. Page | Next B-3 83R-200 Series Carbon Steel 3-Piece Full Port Socket Weld Ball Valve With Actuator Ready ISO Mounting Pad Socket Weld, 1/2" to 1" 1000 psig WOG, 1-1/4" & 2" 800 psig WOG, Cold Non-Shock. 150 psig Saturated Steam. Vacuum Service to 29 inches Hg. Federal Specification: WW-V-35C, Type: II, Composition: CS, Style: 1. MSS SP-110; Ball Valve Threaded, Socket-Welding, Solder Joint, Grooved and Flared Ends. FEATURES • Multi-piece packing set • ISO 5211 mounting pad • Blow-out-proof stem design • In-line repairable • Adjustable packing gland • Investment cast components • RPTFE seats and seals • Full port configuration STANDARD MATERIAL LIST 1. Stem 2. Jam nut 3. Low profile nut 4. Gland 5. Stem bearing 6. End cap (2) A108-CS Steel, zinc plate 316 SS A276-316 RPTFE A108-CS (1/2" to 1") A216-WCB (1-1/4" to 2") 7. Hex nut (4) 8. Seat (2) 9. Ball 10. Body bolt (4) 11. Stem packing 12. Body 13. Lock tab washer 14. Lever and grip Stl-gr. 8-zinc plt RPTFE A108-CS chrome plate Stl-gr. 8-zinc plt MPTFE ASTM A216-WCB 304 SS Stl-zinc plt-w/vinyl VARIATIONS AVAILABLE: • 83R-240 Series (316 SS Ball & Stem) • Meets NACE MR-01-75 (1-1/4" to 2") OPTIONS AVAILABLE: (SUFFIX) -02-03-04-08-10-14-18-21-24-27-35-36-39-59-60-AR-WB- OPTION Static Grounded 1-1/4" Stem Extension 2-1/4" Stem Extension 90º Reversed Stem SS Lever & Nut Vented Ball Plain Yellow Grip UHMWPE Seats (Non-PTFE) Graphite Stem Packing Latch Lock Lever VTFE Trim SS Round Handle SS Hi-Rise Locking Wheel Handle, SS Nut SS External Trim - 3-pc. Valves Grounded Ball & Stem Less Handle & Stop-Add Belleville Washers With Lever & Belleville Washers For Pressure/Temperature Ratings, Refer to Page M-10, Graph No. 7 CARBON STEEL 3-PIECE FULL PORT SOCKET WELD BALL VALVE WITH ISO MOUNTING PAD J NUMBER SIZE 83R-203-01 1/2" 83R-204-01 3/4" 83R-205-01 1" 83R-206-01 1-1/4" 83R-207-01 1-1/2" 83R-208-01 2" 83R-200-01 3" B-4 Back A B C .62 .81 1.00 1.25 1.50 2.00 3.00 1.40 1.71 1.92 2.35 2.59 3.01 4.00 2.81 3.42 3.85 4.70 5.18 6.03 8.00 D E 2.05 4.18 2.42 4.93 2.54 4.93 3.16 8.06 3.49 8.06 3.95 8.06 6.44 19.13 F G H I (FLATS) .59 .70 .70 .98 .98 .98 1.42 1.17 1.39 1.39 1.95 1.95 1.95 2.84 .61 .84 .84 1.16 1.16 1.16 1.69 .28 .28 .28 .34 .34 .34 3/8-16 .247/.249 .247/.249 .247/.249 .370/.372 .370/.372 .370/.372 .725 COPYRIGHT ©2003 CONBRACO IND., INC. – PRINTED IN U.S.A. K L M N (THRDS.) UNF 3/8-24 3/8-24 3/8-24 5/8-18 5/8-18 5/8-18 N/A .855 1.065 1.330 1.675 1.915 2.405 3.54 .43 .56 .68 .81 .87 1.05 1.37 3.28 3.52 3.64 4.06 4.38 4.85 8.14 Prev. Page | Next SIZES 1/2" to 3" 1/2" to 2" 1/2" to 2" 1/2" to 2" 1/2" to 3" 1/2" to 3" 1/2" to 3" 1/2" to 3" 1/2" to 3" 1/2" to 2" 1/2" to 3" 1/2" to 2" 1/2" to 2" 1/2" to 3" 1/2" to 3" 1/2" to 3" 1/2" to 3" 83R-700 Series Carbon Steel 3-Piece Full Port Butt-Weld Ball Valve With Actuator Ready ISO Mounting Pad Schedule 40 Butt-Weld Ends, 1/2" to 1" 1000 psig WOG, 1-1/2" & 2" 800 psig WOG, Cold Non-Shock. 150 psig Saturated Steam. Vacuum Service to 29 inches Hg. Federal Specification: WW-V-35C, Type: II, Composition: CS, Style: 1. MSS SP-72; Ball Valves with Flanged or Butt-Weld Ends for General Service. FEATURES • Multi-piece packing set • ISO 5211 mounting pad • Blow-out-proof stem design • In-line repairable • Adjustable packing gland • Investment cast components • RPTFE seats and seals • Full port configuration STANDARD MATERIAL LIST 1. Stem 2. Jam nut 3. Low profile nut 4. Gland 5. Stem bearing 6. End cap (2) A108-CS Steel, zinc plate 316 SS A276-316 RPTFE A108-CS (1/2" to 1") A216-WCB (1-1/4" to 2") 7. Hex nut (4) 8. Seat (2) 9. Ball 10. Body bolt (4) 11. Stem packing 12. Body 13. Lock tab washer 14. Lever and grip Stl-gr. 8-zinc plt RPTFE A108-CS chrome plate Stl-gr. 8-zinc plt MPTFE ASTM A216-WCB 304 SS Stl-zinc plt-w/vinyl VARIATIONS AVAILABLE: • 83R-740 Series (316 SS Ball & Stem) • Meets NACE MR-01-75 (1-1/4" to 2") OPTIONS AVAILABLE: (SUFFIX) -02-03-04-08-10-14-18-21-24-27-35-36-39-59-60-AR-WB- For Pressure/Temperature Ratings, Refer to Page M-10, Graph No. 7 OPTION SIZES Static Grounded 1/2" to 2" 1-1/4" Stem Extension 1/2" to 2" 2-1/4" Stem Extension 1/2" to 2" 90º Reversed Stem 1/2" to 2" SS Lever & Nut 1/2" to 2" Vented Ball 1/2" to 2" Plain Yellow Grip 1/2" to 2" UHMWPE Seats (Non-PTFE) 1/2" to 2" Graphite Stem Packing 1/2" to 2" Latch Lock Lever 1/2" to 2" VTFE Trim 1/2" to 2" SS Round Handle 1/2" to 2" SS Hi-Rise Locking Wheel Handle, SS Nut 1/2" to 2" SS External Trim - 3-pc. Valves 1/2" to 2" Grounded Ball & Stem 1/2" to 2" Less Handle & Stop-Add Belleville Washers1/2" to 2" With Lever & Belleville Washers 1/2" to 2" CARBON STEEL 3-PIECE FULL PORT BUTT-WELD BALL VALVE WITH ISO MOUNTING PAD NUMBER SIZE 83R-703-01 1/2" 83R-704-01 3/4" 83R-705-01 1" 83R-707-01 1-1/2" 83R-708-01 2" Back A B C D E F G H I J (FLATS) .62 .81 1.00 1.50 2.00 1.40 1.71 1.98 2.59 3.01 2.81 3.42 3.97 5.18 6.03 2.05 2.42 2.54 3.49 3.95 4.18 4.93 4.93 8.06 8.06 .59 .70 .70 .98 .98 1.17 1.39 1.39 1.95 1.95 .61 .84 .84 1.16 1.16 .28 .28 .28 .34 .34 .247/.249 .247/.249 .247/.249 .370/.372 .370/.372 COPYRIGHT ©2003 CONBRACO IND., INC. – PRINTED IN U.S.A. K (THRDS.) UNF 3/8-24 3/8-24 3/8-24 5/8-18 5/8-18 Prev. Page | Next B-5 85R-100 Series Stainless Steel 3-Piece Ball Valve With Actuator Ready ISO Mounting Pad Std. Port Threaded, 3/4" to 1-1/4" 1000 psig WOG, 1-1/2" & 2" 800 psig WOG, Cold Non-Shock. 150 psig Saturated Steam. Vacuum Service to 29 inches Hg. Federal Specification: WW-V-35C, Type: II, Composition: SS, Style: 1. MSS SP-110; Ball Valve Threaded, Socket-Welding, Solder Joint, Grooved and Flared Ends. FEATURES • Multi-piece packing set • ISO 5211 mounting pad • Blow-out-proof stem design • In-line repairable • Adjustable packing gland • Investment cast components • RPTFE seats and seals • Full port configuration • Meets NACE MR01-75 STANDARD MATERIAL LIST 1. Stem 2. Jam nut 3. Low profile nut 4. Gland 5. Stem bearing 6. End cap (2) 7. Hex nut (4) A276-316 SS 316 SS A276-316 RPTFE ASTM A351-CF3M 18-8 SS 8. Seat (2) 9. Ball 10. Body bolt (4) 11. Stem packing 12. Body 13. Lock tab washer 14. Lever and grip RPTFE 316 SS 18-8 SS MPTFE ASTM A351-CF8M 304 SS 304 SS w/vinyl OPTIONS AVAILABLE: (SUFFIX) -02-03-04-08-14-18-21-24-27-35-36-39-49-57-60-63-P01-T01-AR-WB- OPTION SIZES Static Grounded 3/4" to 2" 1-1/4" Stem Extension 3/4" to 2" 2-1/4" Stem Extension 3/4" to 2" 90º Reversed Stem 3/4" to 2" Vented Ball 3/4" to 2" Plain Yellow Grip 3/4" to 2" UHMWPE Seats (Non-PTFE) 3/4" to 2" Graphite Stem Packing 3/4" to 2" Latch Lock Lever 3/4" to 2" VTFE Trim 3/4" to 2" SS Round Handle 3/4" to 2" SS Hi-Rise Locking Wheel Handle, SS Nut 3/4" to 2" Assembled Dry 3/4" to 2" Oxygen Cleaned 3/4" to 2" Grounded Ball & Stem 3/4" to 2" Threaded x Socket Weld 3/4" to 2" BSPP (Parallel) Thread Connection 3/4" to 2" BSPT (Tapered) Thread Connection 3/4" to 2" Less Handle & Stop-Add Belleville Washers3/4" to 2" With Lever & Belleville Washers 3/4" to 2" For Pressure/Temperature Ratings, Refer to Page M-10, Graph No. 8 STAINLESS STEEL 3-PIECE STANDARD PORT BALL VALVE WITH ISO MOUNTING PAD NUMBER SIZE 85R-104-01 3/4" 85R-105-01 1" 85R-106-01 1-1/4" 85R-107-01 1-1/2" 85R-108-01 2" B-6 Back A B C D E F G H I J (FLATS) .62 .81 1.00 1.25 1.50 1.40 1.71 1.92 2.35 2.59 2.81 3.42 3.85 4.70 5.18 2.05 2.42 2.54 3.16 3.49 4.18 4.93 4.93 8.06 8.06 .59 .70 .70 .98 .98 1.17 1.39 1.39 1.95 1.95 .61 .84 .84 1.16 1.16 .28 .28 .28 .34 .34 .247/.249 .247/.249 .247/.249 .370/.372 .370/.372 COPYRIGHT ©2003 CONBRACO IND., INC. – PRINTED IN U.S.A. K (THRDS.) UNF 3/8-24 3/8-24 3/8-24 5/8-18 5/8-18 Prev. Page | Next 85R-200 Series Stainless Steel 3-Piece Standard Port Socket Weld Ball Valve With Actuator Ready ISO Mounting Pad Socket Weld, 3/4" to 1-1/4" 1000 psig WOG, 1-1/2" & 2" 800 psig WOG, Cold Non-Shock. 150 psig Saturated Steam. Vacuum Service to 29 inches Hg. Federal Specification: WW-V-35C, Type: II, Composition: SS, Style: 1. MSS SP-110; Ball Valve Threaded, Socket-Welding, Solder Joint, Grooved and Flared Ends. FEATURES • Multi-piece packing set • ISO 5211 mounting pad • Blow-out-proof stem design • In-line repairable • Adjustable packing gland • Investment cast components • RPTFE seats and seals • Standard port configuration • Meets NACE MR01-75 STANDARD MATERIAL LIST 1. Stem 2. Jam nut 3. Low profile nut 4. Gland 5. Stem bearing 6. End cap (2) 7. Hex nut (4) A276-316 SS 316 SS A276-316 RPTFE ASTM A351-CF3M 18-8 SS 8. Seat (2) 9. Ball 10. Body bolt (4) 11. Stem packing 12. Body 13. Lock tab washer 14. Lever and grip RPTFE 316 SS 18-8 SS MPTFE ASTM A351-CF8M 304 SS 304 SS w/vinyl OPTIONS AVAILABLE: (SUFFIX) -02-03-04-08-14-18-21-24-27-35-36-39-49-57-60-AR-WB- OPTION SIZES Static Grounded 3/4" to 2" 1-1/4" Stem Extension 3/4" to 2" 2-1/4" Stem Extension 3/4" to 2" 90º Reversed Stem 3/4" to 2" Vented Ball 3/4" to 2" Plain Yellow Grip 3/4" to 2" UHMWPE Seats (Non-PTFE) 3/4" to 2" Graphite Stem Packing 3/4" to 2" Latch Lock Lever 3/4" to 2" VTFE Trim 3/4" to 2" SS Round Handle 3/4" to 2" SS Hi-Rise Locking Wheel Handle, SS Nut 3/4" to 2" Assembled Dry 3/4" to 2" Oxygen Cleaned 3/4" to 2" Grounded Ball & Stem 3/4" to 2" Less Handle & Stop-Add Belleville Washers3/4" to 2" With Lever & Belleville Washers 3/4" to 2" For Pressure/Temperature Ratings, Refer to Page M-10, Graph No. 8 STAINLESS STEEL 3-PIECE STANDARD PORT SOCKET WELD BALL VALVE WITH ISO MOUNTING PAD NUMBER SIZE 85R-204-01 3/4" 85R-205-01 1" 85R-206-01 1-1/4" 85R-207-01 1-1/2" 85R-208-01 2" Back A B C D E F G H I J (FLATS) .62 .81 1.00 1.25 1.50 1.40 1.71 1.92 2.35 2.59 2.81 3.42 3.85 4.70 5.18 2.05 2.42 2.54 3.16 3.49 4.18 4.93 4.93 8.06 8.06 .59 .70 .70 .98 .98 1.17 1.39 1.39 1.95 1.95 .61 .84 .84 1.16 1.16 .28 .28 .28 .34 .34 .247/.249 .247/.249 .247/.249 .370/.372 .370/.372 COPYRIGHT ©2003 CONBRACO IND., INC. – PRINTED IN U.S.A. K (THRDS.) UNF 3/8-24 3/8-24 3/8-24 5/8-18 5/8-18 L M 1.065 1.330 1.675 1.915 2.406 .56 .68 .81 .87 1.06 Prev. Page | Next B-7 86R-100 Series Stainless Steel 3-Piece Full Port Ball Valve With Actuator Ready ISO Mounting Pad Full Port Threaded, 1/4" to 1" 1000 psig WOG, 1-1/4" to 3" 800 psig WOG, Cold Non-Shock. 150 psig Saturated Steam. Vacuum Service to 29 inches Hg. Federal Specification: WW-V-35C, Type: II, Composition: SS, Style: 1. MSS SP-110; Ball Valve Threaded, Socket-Welding, Solder Joint, Grooved and Flared Ends. FEATURES • Multi-piece packing set • ISO 5211 mounting pad • Blow-out-proof stem design • In-line repairable • Adjustable packing gland • Investment cast components • RPTFE seats and seals • Full port configuration • Meets NACE MR01-75 STANDARD MATERIAL LIST 1. Stem 2. Jam nut 3. Low profile nut 4. Gland 5. Stem bearing 6. End cap (2) 7. Hex nut (4) A276-316 SS 316 SS A276-316 RPTFE ASTM A351-CF3M 18-8 SS 8. Seat (2) 9. Ball 10. Body bolt (4) 11. Stem packing 12. Body 13. Lock tab washer 14. Lever and grip RPTFE 316 SS 18-8 SS MPTFE ASTM A351-CF8M 304 SS 304 SS w/vinyl OPTIONS AVAILABLE: (SUFFIX) -02-03-04-08-14-18-21-24-27-35-36-39-49-57-60-63-P01-T01-AR-WB- OPTION SIZES Static Grounded 1/4" to 3" 1-1/4" Stem Extension 1/4" to 2" 2-1/4" Stem Extension 1/4" to 2" 90º Reversed Stem 1/4" to 2" Vented Ball 1/4" to 3" Plain Yellow Grip 1/4" to 3" UHMWPE Seats (Non-PTFE) 1/4" to 2" Graphite Stem Packing 1/4" to 3" Latch Lock Lever 1/4" to 2" VTFE Trim 1/4" to 3" SS Round Handle 1/4" to 2" SS Hi-Rise Locking Wheel Handle, SS Nut 1/4" to 2" Assembled Dry 1/4" to 3" Oxygen Cleaned 1/4" to 3" Grounded Ball & Stem 1/4" to 3" Threaded x Socket Weld 1/4" to 2" BSPP (Parallel) Thread Connection 1/4" to 2" BSPT (Tapered) Thread Connection 1/4" to 2" Less Handle & Stop-Add Belleville Washers1/4" to 3" With Lever & Belleville Washers 1/4" to 3" For Pressure/Temperature Ratings, Refer to Page M-10, Graph No. 8 STAINLESS STEEL 3-PIECE FULL PORT BALL VALVE WITH ISO MOUNTING PAD NUMBER SIZE 86R-101-01 1/4" 86R-102-01 3/8" 86R-103-01 1/2" 86R-104-01 3/4" 86R-105-01 1" 86R-106-01 1-1/4" 86R-107-01 1-1/2" 86R-108-01 2" 86R-100-01 3" B-8 Back A B C D E F G H I J (FLATS) .43 .50 .62 .81 1.00 1.25 1.50 2.00 3.00 1.40 1.40 1.40 1.71 1.92 2.35 2.59 3.01 4.00 2.81 2.81 2.81 3.42 3.85 4.70 5.18 6.03 8.00 2.05 2.05 2.05 2.42 2.54 3.16 3.49 3.95 6.44 4.18 4.18 4.18 4.93 4.93 8.06 8.06 8.06 19.13 .59 .59 .59 .70 .70 .98 .98 .98 1.42 1.17 1.17 1.17 1.39 1.39 1.95 1.95 1.95 2.84 .61 .61 .61 .84 .84 1.16 1.16 1.16 1.69 .28 .28 .28 .28 .28 .34 .34 .34 3/8-16 .247/.249 .247/.249 .247/.249 .247/.249 .247/.249 .370/.372 .370/.372 .370/.372 .725 COPYRIGHT ©2003 CONBRACO IND., INC. – PRINTED IN U.S.A. K (THRDS.) UNF 3/8-24 3/8-24 3/8-24 3/8-24 3/8-24 5/8-18 5/8-18 5/8-18 NA N 3.28 3.28 3.28 3.52 3.64 4.06 4.38 4.85 8.14 Prev. Page | Next 86R-200 Series Stainless Steel 3-Piece Full Port Socket Weld Valve Ball Valve With Actuator Ready ISO Mounting Pad Socket Weld, 1/4" to 1" 1000 psig WOG, 1-1/4" to 3" 800 psig WOG, Cold Non-Shock. 150 psig Saturated Steam. Vacuum Service to 29 inches Hg. Federal Specification: WW-V-35C, Type: II, Composition: SS, Style: 1. MSS SP-110; Ball Valve Threaded, Socket-Welding, Solder Joint, Grooved and Flared Ends. FEATURES • Multi-piece packing set • ISO 5211 mounting pad • Blow-out-proof stem design • In-line repairable • Adjustable packing gland • Investment cast components • RPTFE seats and seals • Full port configuration • Meets NACE MR01-75 STANDARD MATERIAL LIST 1. Stem 2. Jam nut 3. Low profile nut 4. Gland 5. Stem bearing 6. End cap (2) 7. Hex nut (4) A276-316 SS 316 SS A276-316 RPTFE ASTM A351-CF3M 18-8 SS 8. Seat (2) 9. Ball 10. Body bolt (4) 11. Stem packing 12. Body 13. Lock tab washer 14. Lever and grip RPTFE 316 SS 18-8 SS MPTFE ASTM A351-CF8M 304 SS 304 SS w/vinyl OPTIONS AVAILABLE: (SUFFIX) -02-03-04-08-14-18-21-24-27-35-36-39-49-56-57-60-AR-WB- OPTION SIZES Static Grounded 1/4" to 3" 1-1/4" Stem Extension 1/4" to 2" 2-1/4" Stem Extension 1/4" to 2" 90º Reversed Stem 1/4" to 2" Vented Ball 1/4" to 3" Plain Yellow Grip 1/4" to 3" UHMWPE Seats (Non-PTFE) 1/4" to 2" Graphite Stem Packing 1/4" to 3" Latch Lock Lever 1/4" to 2" VTFE Trim 1/4" to 3" SS Round Handle 3/4" to 2" SS Hi-Rise Locking Wheel Handle, SS Nut 1/4" to 2" Assembled Dry 1/4" to 3" Multi-fill Seats 1/4" to 3" Oxygen Cleaned 1/4" to 3" Grounded Ball & Stem 1/4" to 3" Less Handle & Stop-Add Belleville Washers1/4" to 3" With Lever & Belleville Washers 1/4" to 3" For Pressure/Temperature Ratings, Refer to Page M-10, Graph No. 8 STAINLESS STEEL 3-PIECE FULL PORT SOCKET WELD BALL VALVE WITH ISO MOUNTING PAD NUMBER SIZE 86R-201-01 1/4" 86R-202-01 3/8" 86R-203-01 1/2" 86R-204-01 3/4" 86R-205-01 1" 86R-206-01 1-1/4" 86R-207-01 1-1/2" 86R-208-01 2" 86R-200-01 3" Back A B C .43 .50 .62 .81 1.00 1.25 1.50 2.00 3.00 1.40 1.40 1.40 1.71 1.92 2.35 2.59 3.01 4.00 2.81 2.81 2.81 3.42 3.85 4.70 5.18 6.03 8.00 D E 2.05 4.18 2.05 4.18 2.05 4.18 2.42 4.93 2.54 4.93 3.16 8.06 3.49 8.06 3.95 8.06 6.44 19.13 F G H I J (FLATS) .59 .59 .59 .70 .70 .98 .98 .98 1.42 1.17 1.17 1.17 1.39 1.39 1.95 1.95 1.95 2.84 .61 .61 .61 .84 .84 1.16 1.16 1.16 1.69 .28 .28 .28 .28 .28 .34 .34 .34 3/8-16 .247/.249 .247/.249 .247/.249 .247/.249 .247/.249 .370/.372 .370/.372 .370/.372 .725 COPYRIGHT ©2003 CONBRACO IND., INC. – PRINTED IN U.S.A. K (THRDS.) UNF 3/8-24 3/8-24 3/8-24 3/8-24 3/8-24 5/8-18 5/8-18 5/8-18 N/A L M N .565 .700 .855 1.065 1.330 1.675 1.915 2.405 3.54 .50 .56 .43 .56 .68 .81 .87 1.05 1.37 3.28 3.28 3.28 3.52 3.64 4.06 4.38 4.85 8.14 Prev. Page | Next B-9 86R-700 Series Stainless Steel 3-Piece Full Port Butt-Weld Ball Valve With Actuator Ready ISO Mounting Pad Schedule 10 Butt-Weld Ends, 1/2" to 1" 1000 psig WOG, 1-1/2" & 2" 800 psig WOG, Cold Non-Shock. 150 psig Saturated Steam. Vacuum Service to 29 inches Hg. Federal Specification: WW-V-35C, Type: II, Composition: SS, Style: 1. MSS SP-72; Ball Valves with Flanged or Butt-Weld Ends for General Service. FEATURES • Multi-piece packing set • ISO 5211 mounting pad • Blow-out-proof stem design • In-line repairable • Adjustable packing gland • Investment cast components • RPTFE seats and seals • Full port configuration • Meets NACE MR01-75 STANDARD MATERIAL LIST 1. Stem 2. Jam nut 3. Low profile nut 4. Gland 5. Stem bearing 6. End cap (2) 7. Hex nut (4) A276-316 SS 316 SS A276-316 RPTFE ASTM A351-CF3M 18-8 SS 8. Seat (2) 9. Ball 10. Body bolt (4) 11. Stem packing 12. Body 13. Lock tab washer 14. Lever and grip RPTFE 316 SS 18-8 SS MPTFE ASTM A351-CF8M 304 SS 304 SS w/vinyl OPTIONS AVAILABLE: (SUFFIX) -02-03-04-08-14-18-21-24-27-35-36-39-49-57-60-AR-WB- OPTION SIZES Static Grounded 1/2" to 2" 1-1/4" Stem Extension 1/2" to 2" 2-1/4" Stem Extension 1/2" to 2" 90º Reversed Stem 1/2" to 2" Vented Ball 1/2" to 2" Plain Yellow Grip 1/2" to 2" UHMWPE Seats (Non-PTFE) 1/2" to 2" Graphite Stem Packing 1/2" to 2" Latch Lock Lever 1/2" to 2" VTFE Trim 1/2" to 2" SS Round Handle 1/4" to 2" SS Hi-Rise Locking Wheel Handle, SS Nut 1/2" to 2" Assembled Dry 1/2" to 2" Oxygen Cleaned 1/2" to 2" Grounded Ball & Stem 1/2" to 2" Less Handle & Stop-Add Belleville Washers1/2" to 2" With Lever & Belleville Washers 1/2" to 2" For Pressure/Temperature Ratings, Refer to Page M-10, Graph No. 8 STAINLESS STEEL 3-PIECE FULL PORT BUTT WELD BALL VALVE WITH ISO MOUNTING PAD NUMBER SIZE 86R-703-01 1/2" 86R-704-01 3/4" 86R-705-01 1" 86R-707-01 1-1/2" 86R-708-01 2" B-10 Back A B C D E F G H I J (FLATS) .62 .81 1.00 1.50 2.00 1.40 1.71 1.98 2.59 3.01 2.81 3.42 3.97 5.18 6.03 2.05 2.42 2.54 3.49 3.95 4.18 4.93 4.93 8.06 8.06 .59 .70 .70 .98 .98 1.17 1.39 1.39 1.95 1.95 .61 .84 .84 1.16 1.16 .28 .28 .28 .34 .34 .247/.249 .247/.249 .247/.249 .370/.372 .370/.372 COPYRIGHT ©2003 CONBRACO IND., INC. – PRINTED IN U.S.A. K (THRDS.) UNF 3/8-24 3/8-24 3/8-24 5/8-18 5/8-18 Prev. Page | Next 401R-100 Series Alloy 20 3-Piece Full Port Ball Valve With Actuator Ready ISO Mounting Pad Full Port Threaded, 1/2" to 1" 1000 psig WOG, 1-1/2" to 3" 800 psig WOG, Cold Non-Shock. 150 psig Saturated Steam. Vacuum Service to 29 inches Hg. Federal Specification: WW-V-35C, Type: II, Composition: SS, Style: 1. MSS SP-110; Ball Valves, Threaded, Socket-Welding, Solder Joint, Grooved and Flared Ends. FEATURES • Multi-piece packing set • ISO 5211 mounting pad • Blow-out-proof stem design • In-line repairable • Meets NACE MR01-75 • Adjustable packing gland • Investment cast components • RPTFE seats and seals • Full port configuration STANDARD MATERIAL LIST 1. Stem 2. Jam nut 3. Low profile nut 4. Gland 5. Stem bearing 6. End cap (2) 7. Hex nut (4) B473-N08020 SS 316 SS A276-316 RPTFE ASTM A351-CN7M 18-8 SS 8. 9. 10. 11. 12. 13. 14. Seat (2) Ball Body bolt (4) Stem packing Body Lock tab washer Lever and grip RPTFE B473-N08020 18-8 SS MPTFE ASTM A351-CN7M 304 SS 304 SS w/vinyl OPTIONS AVAILABLE: (SUFFIX) -02-03-04-08-18-21-24-27-35-36-39-49-57-60-P01-T01-AR-WB- OPTION Static Grounded 1-1/4" Stem Extension 2-1/4" Stem Extension 90º Reversed Stem Plain Yellow Grip UHMWPE Seats (Non-PTFE) Graphite Stem Packing Latch Lock Lever VTFE Trim SS Hi-Rise Round Handle & Nut SS Hi-Rise Locking Wheel Handle, SS Nut Assembled Dry Oxygen Cleaned Grounded Ball & Stem BSPP (Parallel) Thread Connection BSPT (Tapered) Thread Connection Less Handle & Stop-Add Belleville Washers With Lever & Belleville Washers SIZES 1/2" to 3" 1/2" to 2" 1/2" to 2" 1/2" to 2" 1/2" to 3" 1/2" to 2" 1/2" to 3" 1/2" to 2" 1/2" to 3" 1/2" to 2" 1/2" to 2" 1/2" to 3" 1/2" to 3" 1/2" to 3" 1/2" to 2" 1/2" to 2" 1/2" to 3" 1/2" to 3" For Pressure/Temperature Ratings, Refer to Page M-10, Graph No. 8 ALLOY 20 3-PC. FULL PORT BV WITH ISO MOUNTING PAD .247/.249 .247/.249 .247/.249 .370/.372 .370/.372 K (Thrds.) UNF 3/8-24 3/8-24 3/8-24 5/8-18 5/8-18 3.28 3.52 3.64 4.38 4.85 .725 N/A 8.14 PART # SIZE A B C D E F G H I J (Flats) 401R10301 401R10401 401R10501 401R10701 401R10801 1/2" 3/4" 1" 1-1/2" 2" .62 .81 1.00 1.50 2.00 1.40 1.71 1.92 2.59 3.01 2.81 3.42 3.85 5.18 6.03 2.05 2.42 2.54 3.49 3.95 4.18 4.93 4.93 8.06 8.06 .59 .70 .70 .98 .98 1.17 1.39 1.39 1.95 1.95 .61 .84 .84 1.16 1.16 .28 .28 .28 .34 .34 401R10001 3" 3.00 8.00 8.00 6.44 19.13 1.42 2.84 1.67 3/8-16 Back COPYRIGHT ©2003 CONBRACO IND., INC. – PRINTED IN U.S.A. L Prev. Page | Next B-11 401R-200 Series Alloy 20 3-Piece Full Port Socket Weld Ball Valve With Actuator Ready ISO Mounting Pad Socket Weld, 1/2" to 1" 1000 psig WOG, 1-1/2" & 2" 800 psig WOG, Cold Non-Shock. 150 psig Saturated Steam. Vacuum Service to 29 inches Hg. Federal Specification: WW-V-35C, Type: II, Composition: SS, Style: 1. MSS SP-110; Ball Valves, Threaded, Socket-Welding, Solder Joint, Grooved and Flared Ends. FEATURES • Multi-piece packing set • ISO 5211 mounting pad • Blow-out-proof stem design • In-line repairable • Meets NACE MR01-75 • Adjustable packing gland • Investment cast components • RPTFE seats and seals • Full port configuration STANDARD MATERIAL LIST 1. Stem 2. Jam nut 3. Low profile nut 4. Gland 5. Stem bearing 6. End cap (2) 7. Hex nut (4) B473-N08020 SS 316 SS A276-316 RPTFE ASTM A351-CN7M 18-8 SS 8. 9. 10. 11. 12. 13. 14. Seat (2) Ball Body bolt (4) Stem packing Body Lock tab washer Lever and grip RPTFE B473-N08020 18-8 SS MPTFE ASTM A351-CN7M 304 SS 304 SS w/vinyl OPTIONS AVAILABLE: (SUFFIX) -02-03-04-08-14-18-21-24-27-35-36-39-49-57-60-AR-WB- OPTION Static Grounded 1-1/4" Stem Extension 2-1/4" Stem Extension 90º Reversed Stem Vented Ball Plain Yellow Grip UHMWPE Seats (Non-PTFE) Graphite Stem Packing Latch Lock Lever VTFE Trim SS Hi-Rise Round Handle & Nut SS Hi-Rise Locking Wheel Handle, SS Nut Assembled Dry Oxygen Cleaned Grounded Ball & Stem Less Handle & Stop-Add Belleville Washers With Lever & Belleville Washers SIZES 1/2" to 2" 1/2" to 2" 1/2" to 2" 1/2" to 2" 1/2" to 2" 1/2" to 2" 1/2" to 2" 1/2" to 2" 1/2" to 2" 1/2" to 2" 1/2" to 2" 1/2" to 2" 1/2" to 2" 1/2" to 2" 1/2" to 2" 1/2" to 2" 1/2" to 2" For Pressure/Temperature Ratings, Refer to Page M-10, Graph No. 8 ALLOY 20 3-PC. FULL PORT BV WITH ISO MOUNTING PAD PART # SIZE A B C D E F G H I J (Flats) 401R20301 401R20401 401R20501 401R20701 401R20801 1/2" 3/4" 1" 1-1/2" 2" .62 .81 1.00 1.50 2.00 1.40 1.71 1.92 2.59 3.01 2.81 3.42 3.85 5.18 6.03 2.05 2.42 2.54 3.49 3.95 4.18 4.93 4.93 8.06 8.06 .59 .70 .70 .98 .98 1.17 1.39 1.39 1.95 1.95 .61 .84 .84 1.16 1.16 .28 .28 .28 .34 .34 .247/.249 .247/.249 .247/.249 .370/.372 .370/.372 B-12 Back COPYRIGHT ©2003 CONBRACO IND., INC. – PRINTED IN U.S.A. K (Thrds.) UNF 3/8-24 3/8-24 3/8-24 5/8-18 5/8-18 L M N .855 1.065 1.330 1.915 2.405 .43 .56 .68 .87 1.05 3.28 3.52 3.64 4.38 4.85 Prev. Page | Next 83-300 Series Carbon Steel 3-Piece High Pressure Ball Valve Standard Port, Threaded, 1/2" to 1-1/4" 1500 psig WOG, 1-1/2" & 2" 1250 psig WOG, Cold Non-Shock. 150 psig Saturated Steam. Vacuum Service to 29 inches Hg. Federal Specification: WW-V-35C, Type: II, Composition: CS, Style: 1. MSS SP-110; Ball Valves Threaded, Socket-Welding, Solder Joint, Grooved and Flared Ends. FEATURES • Nitride corrosion protection • Adjustable packing gland • In-line repairable • Blow-out-proof stem design • (-29) certified to API 607 4TH ed. Class 600 burn • Meets NACE MR-01-75 with SS trim • Investment Cast Components • Actuator mounting pad (1" to 2") • RPTFE seats and seals STANDARD MATERIAL LIST 1. Lever and grip 2. Body bolt (4) 3. Hex nut (4) 4. Ball 5. Seat (2) 6. End cap (2) 7. Seat holder (2) CS, zinc plated w/vinyl Steel, SAE grade 8 zinc plated Steel, SAE grade 8 zinc plated A108-CS chrome plated RPTFE A216-WCB A108-CS 8. Gland nut 9. Stem 10. Lever nut 11. Stem packing 12. Stem bearing 13. Body 14. Body seal (2) A108-CS A108-CS Steel, zinc plated RPTFE RPTFE A216-WCB RPTFE VARIATIONS AVAILABLE: 83-340 Series (316 SS Ball & Stem) OPTIONS AVAILABLE: (SUFFIX) -02-03-04-07-08-10-14-15-16-18-27-29-32-45-48-56-58-59-60-63-64-P01-T01- OPTION Static Grounded 1-1/4" Stem Extension 2-1/4" Stem Extension Tee Handle 90º Reversed Stem SS Lever & Nut Vented Ball (see page J-2) Round Handle Vertical Chain Lever Plain Yellow Grip Latch Lock Lever Firesafe SS Tee Handle & Nut Less Lever & Nut SS Oval Handle (No Latch) & Nut Multifill Seats Chain Lever - Horizontal SS External Trim - 3-pc. Valves Grounded Ball & Stem NPT x Socket Weld 250# Steam Trim BSPP (Parallel) Thread Connection BSPT (Tapered) Thread Connection SIZES 1/2" to 2" 1/2" to 2" 1/2" to 2" 1/2" to 2" 1/2" to 2" 1/2" to 2" 1/2" to 2" 1/2" to 2" 3/4" to 2" 1/2" to 2" 3/4" to 2" 1/2" to 2" 1/2" to 2" 1/2" to 2" 1/2" to 2" 1/2" to 2" 3/4" to 2" 1/2" to 2" 1/2" to 2" 1/2" to 2" 1/2" to 2" 1/2" to 2" 1/2" to 2" CARBON STEEL 3-PIECE HIGH PRESSURE BALL VALVE NUMBER SIZE 83-303-01 1/2" 83-304-01 3/4" 83-305-01A 1" 83-306-01A 1-1/4" 83-307-01A 1-1/2" 83-308-01A 2" Back A .50 .62 .81 1.00 1.25 1.50 B 1.50 1.87 1.99 2.31 2.62 2.74 C 3.00 3.74 3.99 4.62 5.25 5.48 D 1.84 2.00 2.18 2.60 2.82 3.37 E 3.87 4.87 4.87 5.50 5.50 8.00 F N/A N/A 1.25 1.62 1.62 1.62 G N/A N/A 1/4-20 5/16-18 5/16-18 5/16-18 Wt. 1.28 2.00 2.69 3.97 5.50 8.05 For Pressure/Temperature Ratings, Refer to Page M-12, Graph No. 11 COPYRIGHT ©2003 CONBRACO IND., INC. – PRINTED IN U.S.A. Prev. Page | Next B-13 83-400 Series Carbon Steel 3-Piece High Pressure Socket Weld Ball Valve Standard Port, Socket Weld, 1/2" to 1-1/4" 1500 psig WOG, 1-1/2" & 2" 1250 psig WOG, Cold Non-Shock. 150 psig Saturated Steam. Vacuum Service to 29 inches Hg. Federal Specification: WW-V-35C, Type: II, Composition: CS, Style: 1. MSS SP-110; Ball Valves Threaded, Socket-Welding, Solder Joint, Grooved and Flared Ends. FEATURES • Nitride corrosion protection • Adjustable packing gland • In-line repairable • Blow-out-proof stem design • (-29) certified to API 607 4TH ed. Class 600 burn • Meets NACE MR-01-75 with SS trim • Investment Cast Components • Actuator mounting pad (1" to 2") • RPTFE seats and seals STANDARD MATERIAL LIST 1. Lever and grip 2. Body bolt (4) 3. Hex nut (4) 4. Ball 5. Seat (2) 6. End cap (2) 7. Seat holder (2) CS, zinc plated w/vinyl Steel, SAE grade 8 zinc plated Steel, SAE grade 8 zinc plated A108-CS chrome plated RPTFE A216-WCB A108-CS 8. Gland nut 9. Stem 10. Lever nut 11. Stem packing 12. Stem bearing 13. Body 14. Body seal (2) A108-CS A108-CS Steel, zinc plated RPTFE RPTFE A216-WCB RPTFE VARIATIONS AVAILABLE: 83-440 Series (316 SS Ball & Stem) OPTIONS AVAILABLE: (SUFFIX) -02-03-04-07-08-10-14-15-16-18-27-29-32-45-48-56-58-59-60-64- B-14 SIZE A 1/2" .50 3/4" .62 1" .81 1-1/4" 1.00 1-1/2" 1.25 2" 1.50 Back B 1.50 1.87 1.99 2.31 2.62 2.74 C 3.00 3.74 3.99 4.62 5.25 5.48 D 1.84 2.00 2.18 2.60 2.82 3.37 E 3.87 4.87 4.87 5.50 5.50 8.00 F N/A N/A 1.25 1.62 1.62 1.62 G N/A N/A 1/4-20 5/16-18 5/16-18 5/16-18 H .855 1.065 1.330 1.675 1.915 2.406 SIZES 1/2" to 2" 1/2" to 2" 1/2" to 2" 1/2" to 2" 1/2" to 2" 1/2" to 2" 1/2" to 2" 1/2" to 2" 3/4" to 2" 1/2" to 2" 3/4" to 2" 1/2" to 2" 1/2" to 2" 1/2" to 2" 1/2" to 2" 1/2" to 2" 3/4" to 2" 1/2" to 2" 1/2" to 2" 1/2" to 2" For Pressure/Temperature Ratings, Refer to Page M-12, Graph No. 11 CARBON STEEL 3-PIECE HIGH PRESSURE SOCKET WELD BALL VALVE NUMBER 83-403-01 83-404-01 83-405-01A 83-406-01A 83-407-01A 83-408-01A OPTION Static Grounded 1-1/4" Stem Extension 2-1/4" Stem Extension Tee Handle 90º Reversed Stem SS Lever & Nut Vented Ball (see page J-2) Round Handle Vertical Chain Lever Plain Yellow Grip Latch Lock Lever Firesafe SS Tee Handle & Nut Less Lever & Nut SS Oval Handle (No Latch) & Nut Multifill Seats Chain Lever - Horizontal SS External Trim - 3-pc. Valves Grounded Ball & Stem 250# Steam Trim I .43 .56 .68 .81 .87 1.06 Wt. 1.28 2.00 2.69 3.97 5.50 8.05 COPYRIGHT ©2003 CONBRACO IND., INC. – PRINTED IN U.S.A. Prev. Page | Next 83-500 Series Carbon Steel 3-Piece High Pressure Full Port Ball Valve Threaded, 1/4" to 1" 1500 psig WOG, 1-1/4" & 2" 1250 psig WOG, Cold Non-Shock. 150 psig Saturated Steam. Vacuum Service to 29 inches Hg. Federal Specification: WW-V-35C, Type: II, Composition: CS, Style: 1. MSS SP-110; Ball Valves Threaded, Socket-Welding, Solder Joint, Grooved and Flared Ends. FEATURES • Nitride corrosion protection • (-29) Certified to API standard 607, • Investment Cast Components • Adjustable packing gland 4th Edition, Class 600 burn • Actuator mounting pad (3/4" to 2") • In-line repairable • Meets NACE MR-01-75 with SS trim • RPTFE seats and seals • Blow-out-proof stem design STANDARD MATERIAL LIST 1. Lever and grip 2. Body bolt (4) 3. Hex nut (4) 4. Ball 5. Seat (2) 6. End cap (2) 7. Seat holder (2) CS, zinc plated w/vinyl Steel, SAE grade 8 zinc plated Steel, SAE grade 8 zinc plated A108-CS chrome plated RPTFE A216-WCB A108-CS 8. 9. 10. 11. 12. 13. 14. Gland nut Stem Lever nut Stem packing Stem bearing Body Body seal (2) A108-CS A108-CS Steel, zinc plated RPTFE RPTFE A216-WCB RPTFE VARIATIONS AVAILABLE: 83-540 Series (316 SS Ball & Stem) OPTIONS AVAILABLE: (SUFFIX) -02-03-04-07-08-10-14-16-18-27-29-32-38-45-47-48-56-58-59-60-63-64-P01-T01- CARBON STEEL 3-PIECE HIGH PRESSURE FULL PORT BALL VALVE NUMBER SIZE 83-501-01 1/4" 83-502-01 3/8" 83-503-01 1/2" 83-504-01A 3/4" 83-505-01A 1" 83-506-01A 1-1/4" 83-507-01A 1-1/2" 83-508-01A 2" Back A .43 .50 .62 .81 1.00 1.25 1.50 2.00 B 1.50 1.50 1.69 1.93 2.25 2.43 2.62 3.12 C 3.00 3.00 3.38 3.87 4.50 4.87 5.25 6.25 D 1.93 1.93 2.00 2.18 2.62 2.87 3.35 3.75 E 3.87 3.87 4.81 4.81 5.50 5.50 8.00 8.00 F N/A N/A N/A 1.25 1.62 1.62 1.62 1.62 G N/A N/A N/A 1/4-20 5/16-18 5/16-18 5/16-18 5/16-18 Wt. 1.21 1.22 1.90 2.56 3.78 5.24 7.67 15.60 OPTION Static Grounded 1-1/4" Stem Extension 2-1/4" Stem Extension Tee Handle 90º Reversed Stem SS Lever & Nut Vented Ball (see page J-2) Vertical Chain Lever Plain Yellow Grip Latch Lock Lever Firesafe SS Tee Handle & Nut PEEK Seats & Bearing (Graphite Packing & Seals) Less Lever & Nut SS Latch-Lock Oval Handle SS Oval Handle (No Latch) & Nut Multifill Seats Chain Lever - Horizontal SS External Trim - 3-pc. Valves Grounded Ball & Stem Female Threaded x Socket Weld 250# Steam Trim BSPP (Parallel) Thread Connection BSPT (Tapered) Thread Connection SIZES 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/2" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/2" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" For Pressure/Temperature Ratings, Refer to Page M-12, Graph No. 11 COPYRIGHT ©2003 CONBRACO IND., INC. – PRINTED IN U.S.A. Prev. Page | Next B-15 83-600 Series Carbon Steel 3-Piece High Pressure Full Port Socket Weld Ball Valve Socket Weld, 1/2" to 1" 1500 psig WOG, 1-1/4" & 2" 1250 psig WOG, Cold Non-Shock. 150 psig Saturated Steam. Vacuum Service to 29 inches Hg. Federal Specification: WW-V-35C, Type: II, Composition: CS, Style: 1. MSS SP-110; Ball Valves Threaded, Socket-Welding, Solder Joint, Grooved and Flared Ends. FEATURES • Nitride corrosion protection • (-29) Certified to API standard 607, • Investment Cast Components • Adjustable packing gland 4th Edition, Class 600 burn • Actuator mounting pad (3/4" to 2") • In-line repairable • Meets NACE MR-01-75 with SS trim • RPTFE seats and seals • Blow-out-proof stem design STANDARD MATERIAL LIST 1. Lever and grip 2. Body bolt (4) 3. Hex nut (4) 4. Ball 5. Seat (2) 6. End cap (2) 7. Seat holder (2) CS, zinc plated w/vinyl Steel, SAE grade 8 zinc plated Steel, SAE grade 8 zinc plated A108-CS chrome plated RPTFE A216-WCB A108-CS 8. Gland nut 9. Stem 10. Lever nut 11. Stem packing 12. Stem bearing 13. Body 14. Body seal (2) A108-CS A108-CS Steel, zinc plated RPTFE RPTFE A216-WCB RPTFE VARIATIONS AVAILABLE: 83-640 Series (316 SS Ball & Stem) OPTIONS AVAILABLE: (SUFFIX) -02-03-04-07-08-10-14-15-16-18-27-29-32-38-45-47-48-56-58-59-60-64- CARBON STEEL 3-PIECE HIGH PRESSURE FULL PORT SOCKET WELD BALL VALVE NUMBER SIZE 83-603-01 1/2" 83-604-01A 3/4" 83-605-01A 1" 83-606-01A 1-1/4" 83-607-01A 1-1/2" 83-608-01A 2" B-16 Back A .62 .81 1.00 1.25 1.50 2.00 B 1.69 1.93 2.25 2.43 2.62 3.12 C 3.38 3.87 4.50 4.87 5.25 6.25 D 2.00 2.18 2.62 2.87 3.35 3.75 E 4.81 4.81 5.50 5.50 8.00 8.00 F N/A 1.25 1.62 1.62 1.62 1.62 G N/A 1/4-20 5/16-18 5/16-18 5/16-18 5/16-18 H .855 1.065 1.330 1.675 1.915 2.406 I .43 .56 .68 .81 .87 1.06 OPTION Static Grounded 1-1/4" Stem Extension 2-1/4" Stem Extension Tee Handle 90º Reversed Stem SS Lever & Nut Vented Ball (see page J-2) Round Handle Vertical Chain Lever Plain Yellow Grip Latch Lock Lever Firesafe SS Tee Handle & Nut PEEK Seats & Bearing (Graphite Packing & Seals) Less Lever & Nut SS Latch-Lock Oval Handle SS Oval Handle (No Latch) & Nut Multifill Seats Chain Lever - Horizontal SS External Trim - 3-pc. Valves Grounded Ball & Stem 250# Steam Trim SIZES 1/2" to 2" 1/2" to 2" 1/2" to 2" 1/2" to 2" 1/2" to 2" 1/2" to 2" 1/2" to 2" 1/2" to 2" 1/2" to 2" 1/2" to 2" 1/2" to 2" 1/2" to 2" 1/2" to 2" 1/2" to 2" 1/2" to 2" 1/2" to 2" 1/4" to 2" 1/2" to 2" 1/2" to 2" 1/2" to 2" 1/2" to 2" 1/2" to 2" For Pressure/Temperature Ratings, Refer to Page M-12, Graph No. 11 Wt. 1.90 2.56 3.78 5.24 7.67 15.60 COPYRIGHT ©2003 CONBRACO IND., INC. – PRINTED IN U.S.A. Prev. Page | Next 85-100 Series Stainless Steel 3-Piece Ball Valve Standard Port Threaded, 1000 psig WOG, Cold Non-Shock. 150 psig Saturated Steam. Vacuum Service to 29 inches Hg. Federal Specification: WW-V-35C, Type: II, Composition: SS, Style: 1. MSS SP-110; Ball Valves Threaded, Socket-Welding, Solder Joint, Grooved and Flared Ends. FEATURES • Meets NACE MR-01-75 • Blow-out-proof stem design • In-line repairable • Investment cast components • RPTFE seats and seals • Adjustable packing gland STANDARD MATERIAL LIST 1. Lever and grip 2. Stem packing 3. Stem bearing 4. Ball 5. Seat (2) 6. End cap (2) 304 SS w/vinyl RPTFE RPTFE A276-316 RPTFE A351-CF3M 7. Gland nut 8. Stem 9. Lever nut 10. Body bolt (4) 11. Hex nut (4) 12. Body A276-316 A276-316 18-8 SS 18-8 SS 18-8 SS A351-CF8M OPTIONS AVAILABLE: (SUFFIX) -02-03-04-07-08-14-15-18-24-27-32-35-45-47-48-49-50-57-60-61-63-P01-T01- OPTION Static Grounded 1-1/4" Stem Extension 2-1/4" Stem Extension Tee Handle 90º Reversed Stem Vented Ball (see page J-2) Round Handle Plain Yellow Grip Graphite Stem Packing Latch Lock Lever SS Tee Handle & Nut VTFE Trim Less Lever & Nut SS Latch-Lock Oval Handle SS Oval Handle (No Latch) & Nut Assembled Dry 2-1/4" CS Locking Stem Extension Oxygen Cleaned Grounded Ball & Stem Grounded Ball & Stem and Assembled Dry Threaded x Socket Weld BSPP (Parallel) Thread Connection BSPT (Tapered) Thread Connection SIZES 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" STAINLESS STEEL 3-PIECE BALL VALVE NUMBER 85-101-01 85-102-01 85-103-01 SIZE 1/4" 3/8" 1/2" A .43 .50 .50 B 1.28 1.28 1.28 C 2.56 2.56 2.56 D 1.81 1.81 1.81 E 3.87 3.87 3.87 F N/A N/A N/A G N/A N/A N/A Wt. 1.02 .98 .97 For Pressure/Temperature Ratings, Refer to Page M-10, Graph No. 8 Back COPYRIGHT ©2003 CONBRACO IND., INC. – PRINTED IN U.S.A. Prev. Page | Next B-17 85-200 Series Stainless Steel 3-Piece Socket Weld Ball Valve Standard Port Socket Weld, 1000 psig WOG, Cold Non-Shock. 150 psig Saturated Steam. Vacuum Service to 29 inches Hg. Federal Specification: WW-V-35C, Type: II, Composition: SS, Style: 1. MSS SP-110; Ball Valves Threaded, Socket-Welding, Solder Joint, Grooved and Flared Ends. FEATURES • Meets NACE MR-01-75 • Blow-out-proof stem design • In-line repairable • Investment cast components • RPTFE seats and seals • Adjustable packing gland STANDARD MATERIAL LIST 1. Lever and grip 2. Stem packing 3. Stem bearing 4. Ball 5. Seat (2) 6. End cap (2) 304 SS w/vinyl RPTFE RPTFE A276-316 RPTFE A351-CF3M 7. Gland nut 8. Stem 9. Lever nut 10. Body bolt (4) 11. Hex nut (4) 12. Body A276-316 A276-316 18-8 SS 18-8 SS 18-8 SS A351-CF8M OPTIONS AVAILABLE: (SUFFIX) -02-03-04-07-08-14-15-18-24-27-32-35-45-47-48-49-57-60- OPTION Static Grounded 1-1/4" Stem Extension 2-1/4" Stem Extension Tee Handle 90º Reversed Stem Vented Ball (see page J-2) Round Handle Plain Yellow Grip Graphite Stem Packing Latch Lock Lever SS Tee Handle & Nut VTFE Trim Less Lever & Nut SS Latch-Lock Oval Handle SS Oval Handle (No Latch) & Nut Assembled Dry Oxygen Cleaned Grounded Ball & Stem SIZES 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" For Pressure/Temperature Ratings, Refer to Page M-10, Graph No. 8 STAINLESS STEEL 3-PIECE SOCKET WELD BALL VALVE NUMBER 85-203-01 B-18 SIZE 1/2" Back A .50 B 1.28 C 2.56 D 1.81 E 3.87 F N/A G N/A H .855 I .43 Wt. .97 COPYRIGHT ©2003 CONBRACO IND., INC. – PRINTED IN U.S.A. Prev. Page | Next 86-500 Series Stainless Steel 3-Piece High Pressure Full Port Ball Valve Threaded, 1/4" to 1" 1500 psig WOG, 1-1/4" & 2" 1250 psig WOG, Cold Non-Shock. 150 psig Saturated Steam. Vacuum Service to 29 inches Hg. Federal Specification: WW-V-35C, Type: II, Composition: SS, Style: 1. MSS SP-110; Ball Valves Threaded, Socket-Welding, Solder Joint, Grooved and Flared Ends. FEATURES • Adjustable packing gland • (-29) Certified to API standard 607, • In-line repairable 4th Edition, Class 600 burn • Blow-out-proof stem design • Meets NACE MR-01-75 • Investment Cast Components • Actuator mounting pad (3/4" to 2") • RPTFE seats and seals STANDARD MATERIAL LIST 1. Lever and grip 2. Stem packing 3. Stem bearing 4. Ball 5. Seat (2) 6. End cap (2) 7. Seat holder (2) 304 SS w/vinyl RPTFE RPTFE A276-316 RPTFE A351-CF3M A276-316 8. Gland nut 9. Stem 10. Lever nut 11. Body bolt (4) 12. Hex nut (4) 13. Body 14. Body seal (2) A276-316 A276-316 304 SS 18-8 SS 18-8 SS A351-CF8M RPTFE OPTIONS AVAILABLE: (SUFFIX) -02-03-04-07-08-14-15-16-18-27-29-32-38-45-47-48-49-56-57-58-60-63-64-66-P01-T01- OPTION Static Grounded 1-1/4" Stem Extension 2-1/4" Stem Extension Tee Handle 90º Reversed Stem Vented Ball (see page J-2) Round Handle Vertical Chain Lever Plain Yellow Grip Latch Lock Lever Firesafe SS Tee Handle & Nut PEEK Seats & Bearing (Graphite Packing & Seals) Less Lever & Nut SS Latch-Lock Oval Handle SS Oval Handle (No Latch) & Nut Assembled Dry Multifull Seats Oxygen Cleaned Chain Lever - Horizontal Grounded Ball & Stem Threaded x Socket Weld 250# Steam Trim FNPT x Butt Weld BSPP (Parallel) Thread Connection BSPT (Tapered) Thread Connection SIZES 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/2" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/2" to 2" 1/4" to 2" 1/2" to 2" 1/4" to 2" 1/2" to 2" 1/4" to 2" 1/4" to 2" STAINLESS STEEL 3-PIECE HIGH PRESSURE FULL PORT BALL VALVE NUMBER SIZE 86-501-01 1/4" 86-502-01 3/8" 86-503-01 1/2" 86-504-01A 3/4" 86-505-01A 1" 86-506-01A 1-1/4" 86-507-01A 1-1/2" 86-508-01A 2" Back A .43 .50 .62 .81 1.00 1.25 1.50 2.00 B 1.50 1.50 1.69 1.93 2.25 2.43 2.62 3.12 C 3.00 3.00 3.38 3.87 4.50 4.87 5.25 6.25 D 1.93 1.93 2.00 2.18 2.62 2.87 3.35 3.75 E 3.87 3.87 4.81 4.81 5.50 5.50 8.00 8.00 F N/A N/A N/A 1.25 1.62 1.62 1.62 1.62 G N/A N/A N/A 1/4-20 5/16-18 5/16-18 5/16-18 5/16-18 Wt. 1.23 1.18 1.62 2.27 3.54 6.00 8.84 15.28 For Pressure/Temperature Ratings, Refer to Page M-11, Graph No. 12 COPYRIGHT ©2003 CONBRACO IND., INC. – PRINTED IN U.S.A. Prev. Page | Next B-19 86-600 Series Stainless Steel 3-Piece High Pressure Full Port Socket Weld Ball Valve Socket Weld, 1/2" to 1" 1500 psig WOG, 1-1/4" & 2" 1250 psig WOG, Cold Non-Shock. 150 psig Saturated Steam. Vacuum Service to 29 inches Hg. Federal Specification: WW-V-35C, Type: II, Composition: SS, Style: 1. MSS SP-110; Ball Valves Threaded, Socket-Welding, Solder Joint, Grooved and Flared Ends. FEATURES • Adjustable packing gland • In-line repairable • Blow-out-proof stem design • (-29) certified to API 607 4TH ed. Class 600 burn • Meets NACE MR-01-75 • Investment Cast Components • Actuator mounting pad (3/4" to 2") • RPTFE seats and seals STANDARD MATERIAL LIST 1. Lever and grip 2. Stem packing 3. Stem bearing 4. Ball 5. Seat (2) 6. End cap (2) 7. Seat holder (2) 304 SS w/vinyl RPTFE RPTFE A276-316 RPTFE A351-CF3M A276-316 8. Gland nut 9. Stem 10. Lever nut 11. Body bolt (4) 12. Hex nut (4) 13. Body 14. Body seal (2) A276-316 A276-316 18-8 SS 18-8 SS 18-8 SS A351-CF8M RPTFE OPTIONS AVAILABLE: (SUFFIX) -02-03-04-07-08-14-15-16-18-27-29-32-38-45-48-49-56-57-58-60-64- G Tapping OPTION Static Grounded 1-1/4" Stem Extension 2-1/4" Stem Extension Tee Handle 90º Reversed Stem Vented Ball (see page J-2) Round Handle Vertical Chain Lever Plain Yellow Grip Latch Lock Lever Firesafe SS Tee Handle & Nut PEEK Seats & Bearing (Graphite Packing & Seals) Less Lever & Nut SS Oval Handle (No Latch) & Nut Assembled Dry Multifill Seats Oxygen Cleaned Chain Lever - Horizontal Grounded Ball & Stem 250# Steam Trim SIZES 1/2" to 2" 1/2" to 2" 1/2" to 2" 1/2" to 2" 1/2" to 2" 1/2" to 2" 1/2" to 2" 1/2" to 2" 1/2" to 2" 1/2" to 2" 1/2" to 2" 1/2" to 2" 1/2" to 2" 1/2" to 2" 1/2" to 2" 1/2" to 2" 1/2" to 2" 1/2" to 2" 1/2" to 2" 1/2" to 2" 1/2" to 2" For Pressure/Temperature Ratings, Refer to Page M-11, Graph No. 12 STAINLESS STEEL 3-PIECE HIGH PRESSURE FULL PORT SOCKET WELD BALL VALVE NUMBER 86-603-01 86-604-01A 86-605-01A 86-606-01A 86-607-01A 86-608-01A B-20 SIZE 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" Back A .62 .81 1.00 1.25 1.50 2.00 B 1.69 1.93 2.25 2.43 2.62 3.12 C 3.38 3.87 4.50 4.87 5.25 6.25 D 2.00 2.18 2.62 2.87 3.35 3.75 E 4.81 4.81 5.50 5.50 8.00 8.00 F N/A 1.25 1.62 1.62 1.62 1.62 G N/A 1/4-20 5/16-18 5/16-18 5/16-18 5/16-18 H .855 1.065 1.330 1.675 1.915 2.406 I .43 .56 .68 .81 .87 1.06 Wt. 1.60 2.24 3.32 5.85 8.62 15.60 COPYRIGHT ©2003 CONBRACO IND., INC. – PRINTED IN U.S.A. Prev. Page | Next 86-900 Series Stainless Steel 3-Piece High Pressure Full Port Butt-Weld Ball Valve Schedule 10 Butt-Weld, 1/2" to 1" 1500 psig WOG, 1-1/2" & 2" 1250 psig WOG, Cold Non-Shock. 150 psig Saturated Steam. Vacuum Service to 29 inches Hg. Federal Specification: WW-V-35C, Type: II, Composition: SS, Style: 1. MSS SP-110; Ball Valves Threaded, Socket-Welding, Solder Joint, Grooved and Flared Ends. MSS SP-72; Ball Valves with Flanged or Buttweld Ends for General Service. FEATURES • Adjustable packing gland • In-line repairable • Blow-out-proof stem design • (-29) Certified to API standard 607, 4th Edition, Class 600 burn • Meets NACE MR-01-75 • Investment Cast Components • Actuator mounting pad (3/4" to 2") • RPTFE seats and seals STANDARD MATERIAL LIST 1. Lever and grip 2. Stem packing 3. Stem bearing 4. Ball 5. Seat (2) 6. End cap (2) 7. Seat Holder (2) 304 SS w/vinyl RPTFE RPTFE A276-316 RPTFE A351-CF3M A276-316 8. Gland nut 9. Stem 10. Lever nut 11. Body bolt (4) 12. Hex nut (4) 13. Body 14. Body seal (2) A276-316 A276-316 304 SS 18-8 SS 18-8 SS A351-CF8M RPTFE OPTIONS AVAILABLE: (SUFFIX) -02-03-04-07-08-14-15-16-18-27-29-32-35-38-45-47-48-49-57-58-60-64- OPTION Static Grounded 1-1/4" Stem Extension 2-1/4" Stem Extension Tee Handle 90º Reversed Stem Vented Ball (see page J-2) Round Handle Vertical Chain Lever Plain Yellow Grip Latch Lock Lever Firesafe SS Tee Handle & Nut VTFE Trim PEEK Seats & Bearing (Graphite Packing & Seals) Less Lever & Nut SS Latch-Lock Oval Handle SS Oval Handle (No Latch) & Nut Assembled Dry Oxygen Cleaned Chain Lever - Horizontal Grounded Ball & Stem 250# Steam Trim SIZES 1/2" to 2" 1/2" to 2" 1/2" to 2" 1/2" to 2" 1/2" to 2" 1/2" to 2" 1/2" to 2" 1/2" to 2" 1/2" to 2" 1/2" to 2" 1/2" to 2" 1/2" to 2" 1/2" to 2" 1/2" to 2" 1/2" to 2" 1/2" to 2" 1/2" to 2" 1/2" to 2" 1/2" to 2" 1/2" to 2" 1/2" to 2" 1/2" to 2" STAINLESS STEEL 3-PIECE HIGH PRESSURE FULL PORT BUTT-WELD BALL VALVE NUMBER SIZE 86-903-01 1/2" 86-904-01A 3/4" 86-905-01A 1" 86-907-01A 1-1/2" 86-908-01A 2" Back A .62 .81 1.00 1.50 2.00 B 1.69 1.93 2.25 2.62 3.11 C 3.38 3.87 4.50 5.25 6.22 D 2.00 2.18 2.62 3.35 3.75 E 4.81 4.81 5.50 8.00 8.00 F N/A 1.25 1.62 1.62 1.62 G N/A 1/4-20 5/16-18 5/16-18 5/16-18 Wt. 1.60 2.24 3.32 8.62 15.60 For Pressure/Temperature Ratings, Refer to Page M-11, Graph No. 12 COPYRIGHT ©2003 CONBRACO IND., INC. – PRINTED IN U.S.A. Prev. Page | Next B-21 SECTION C CONTENTS UNIBODY “SATURN®” BALL VALVES DESCRIPTION PAGE 9A-100 Series, Threaded Heavy Pattern Bronze C-1 90-100 Series, Threaded Bronze (UL Listed) C-2 91-100 Series, Threaded Bronze C-3 92-100 Series, Threaded Carbon Steel C-4 93-100 Series, Threaded Carbon Steel C-5 96-100 Series, Threaded Stainless Steel C-6 Back Prev. Page | Next 9A-100 Series Bronze Uni-Body Heavy Pattern Saturn Ball Valve ® Threaded, 600 psig WOG, Cold Non-Shock. 150 psig Saturated Steam. Federal Specification: WW-V-35C, Type: II, Composition: BZ, Style: 3. MSS SP-110; Ball Valves Threaded, Socket-Welding, Solder Joint, Grooved and Flared Ends. FEATURES • Static grounding devices • RPTFE seats and seals • One piece bronze body • Compact • Blow-out-proof stem design • Adjustable packing gland • Chromium plated ball STANDARD MATERIAL LIST 1. Lever and grip 2. Stem packing 3. Stem bearing 4. Ball 5. Seat (2) 6. Retainer Steel, zinc plated w/vinyl RPTFE RPTFE B16, chrome plated RPTFE B16 7. Gland nut 8. Stem 9. Lever nut (Screw 1/4" to 1/2") 10. Ground spring 11. Body B16 B16 Steel, zinc plated SS B584-C84400 VARIATIONS AVAILABLE: 9A-140 Series (316 SS Ball & Stem) OPTIONS AVAILABLE: (SUFFIX) -03-04-05-07-08-10-14-15-16-17-20-24-27-30-32-40-45-46-47-48-49-50-57-58-60-P01-T01- BRONZE UNI-BODY HEAVY PATTERN SATURN® BALL VALVE NUMBER 9A-101-01 9A-102-01 9A-103-01 9A-104-01 9A-105-01 9A-106-01 9A-107-01 9A-108-01 SIZE 1/4" 3/8" 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" Back A .37 .37 .37 .50 .62 .81 1.00 1.25 B 1.34 1.34 1.34 1.44 1.72 1.94 2.06 2.29 C 2.59 2.59 2.59 2.84 3.28 3.84 4.00 4.56 D 1.68 1.68 1.81 1.84 2.00 2.18 2.68 2.87 E 3.87 3.87 3.87 3.87 4.87 4.87 5.50 5.50 Wt. .73 .73 .73 1.10 1.73 2.92 3.96 5.97 OPTION SIZES 1-1/4" CS Stem Extension 1/4" to 2" 2-1/4" CS Stem Extension 1/4" to 2" Plain Ball 1/4" to 2" Steel Tee Handle 1/4" to 2" 90º Reversed Stem 3/4" to 2" SS Lever & Nut 1/4" to 2" Side Vented Ball (Uni-Directional) 1/4" to 2" Wheel Handle, Steel 1/4" to 2" Chain Lever - Vertical 1" to 2" Rough Chrome Plated - Bronze Valves 1/4" to 2" Slot Vented Ball (Bi-Directional) - Bronze Valves 1/4" to 2" Graphite Packing 1/4" to 2" SS Latch-Lock Lever & Nut 1/4" to 2" Cam-Lock Handle & Grounded 1/4" to 2" SS Tee Handle & Nut 1/4" to 2" Cyl-Loc & Grounded 3/4" to 2" Less Lever & Nut 1/4" to 2" Latch Lock Lever - Lock in Closed Position Only 1/2" to 2" SS Oval Latch-Lock Handle & Nut 1/4" to 1-1/4" SS Oval Handle 1/4" to 2" Assembled Dry 1/4" to 2" 2-1/4" CS Locking Stem Extension 3/4" to 2" Oxygen Cleaned 1/4" to 2" Chain Lever - Horizontal 1" to 2" Grounded Ball & Stem 3/4" to 2" BSPP (Parallel) Thread Connection 1/4" to 2" BSPT (Tapered) Thread Connection 1/4" to 2" For Pressure/Temperature Ratings, Refer to Page M-8, Graph No. 4 COPYRIGHT ©2003 CONBRACO IND., INC. – PRINTED IN U.S.A. Prev. Page | Next C-1 90-100 Series Bronze Uni-Body Saturn Ball Valve ® Threaded, 300 psig WOG, Cold Non-Shock. 150 psig Saturated Steam. Federal Specification: WW-V-35C, Type: II, Composition: BZ, Style: 3. MSS SP-110; Ball Valves Threaded, Socket-Welding, Solder Joint, Grooved and Flared Ends. FEATURES • UL Listed at 300 psig for fuel, inert gas and flammable liquids • Valves with tee handles UL listed • RPTFE seats and seals • Blow-out-proof stem design • Adjustable packing gland • One piece bronze body • Chromium plated ball • Compact UL LISTINGS • Guide YRPV: Gas shutoff valve for use with natural and manufactured gases. • Guide YQNZ: Compressed gas shutoff valve for use with air, inert gases, hydrogen, oxygen and common refrigerants except ammonia. • Guide YRBX: Flammable liquid shutoff valve. STANDARD MATERIAL LIST 1. Lever and grip 2. Stem packing 3. Stem bearing 4. Ball 5. Seat (2) Steel, zinc plated w/vinyl RPTFE RPTFE B16, chrome plated RPTFE 6. Retainer 7. Gland nut 8. Stem 9. Lever nut (Screw 1/2") 10. Body B16 B16 B16 Steel, zinc plated B584-C84400 OPTIONS AVAILABLE: (SUFFIX) -05-07- OPTION Plain Ball Steel Tee Handle SIZES 1/2" to 2" 1/2" to 2" BRONZE UNI-BODY SATURN® BALL VALVE NUMBER 90-103-01 90-104-01 90-105-01 90-106-01 90-107-01 90-108-01 C-2 SIZE 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" Back A .37 .50 .62 .81 1.00 1.25 B 1.14 1.36 1.50 1.81 2.06 2.43 C 2.15 2.61 2.90 3.50 3.79 4.42 D 1.68 1.75 2.00 2.18 2.62 2.81 E 3.87 3.87 4.87 4.87 5.50 5.50 Wt. .53 .82 1.25 1.98 2.99 4.64 COPYRIGHT ©2003 CONBRACO IND., INC. – PRINTED IN U.S.A. Prev. Page | Next 91-100 Series Bronze Uni-Body Saturn Ball Valve ® Threaded, 400 psig WOG, Cold Non-Shock. 150 psig Saturated Steam. Federal Specification: WW-V-35C, Type: II, Composition: BZ, Style: 3. MSS SP-110; Ball Valves Threaded, Socket-Welding, Solder Joint, Grooved and Flared Ends. FEATURES • Compact • RPTFE seats and seals • One piece bronze body • Blow-out-proof stem design • Adjustable packing gland • Chromium plated ball STANDARD MATERIAL LIST 1. Lever and grip 2. Stem packing 3. Stem bearing 4. Ball 5. Seat (2) Steel, zinc plated w/vinyl RPTFE RPTFE B16, chrome plated RPTFE 6. Retainer 7. Gland nut 8. Stem 9. Lever nut (Screw 1/4" to 1/2") 10. Body B16 B16 B16 Steel, zinc plated B584-C84400 VARIATIONS AVAILABLE: 91-120 Series (Adjustable Stop Lever) 91-140 Series (316 SS Ball & Stem) 91-150 Series (Original Balancing Stop) OPTIONS AVAILABLE: BRONZE UNI-BODY SATURN® BALL VALVE NUMBER 91-101-01 91-102-01 91-103-01 91-104-01 91-105-01 91-106-01 91-107-01 91-108-01 SIZE 1/4" 3/8" 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" Back A .37 .37 .37 .50 .62 .81 1.00 1.25 B 1.14 1.14 1.14 1.36 1.50 1.81 2.06 2.43 C 2.15 2.15 2.15 2.61 2.90 3.50 3.79 4.42 D 1.68 1.68 1.68 1.75 2.00 2.18 2.62 2.81 E 3.87 3.87 3.87 3.87 4.87 4.87 5.50 5.50 Wt. .53 .53 .53 .82 1.25 1.98 2.99 4.64 (SUFFIX) -02-03-04-05-07-08-10-14-15-16-17-20-24-27-30-32-40-45-46-47-48-49-50-57-58-60-P01-T01- OPTION SIZES Static Grounded 1/4" to 2" 1-1/4" CS Stem Extension 1/4" to 2" 2-1/4" CS Stem Extension 1/4" to 2" Plain Ball 1/4" to 2" Steel Tee Handle 1/4" to 2" 90º Reversed Stem 3/4" to 2" SS Lever & Nut 1/4" to 2" Side Vented Ball (Uni-Directional) 1/4" to 2" Wheel Handle, Steel 1/4" to 2" Chain Lever - Vertical 1" to 2" Rough Chrome Plated - Bronze Valves 1/4" to 2" Slot Vented Ball (Bi-Directional) - Bronze Valves 1/4" to 2" Graphite Packing 1/4" to 2" SS Latch-Lock Lever & Nut 1/4" to 2" Cam-Lock Handle & Grounded 1/4" to 2" SS Tee Handle & Nut 1/4" to 2" Cyl-Loc & Grounded 3/4" to 2" Less Lever & Nut 1/4" to 2" Latch Lock Lever - Lock in Closed Position Only 1/2" to 2" SS Oval Latch-Lock Handle & Nut 1/4" to 1-1/4" SS Oval Handle 1/4" to 2" Assembled Dry 1/4" to 2" 2-1/4" CS Locking Stem Extension 3/4" to 2" Oxygen Cleaned 1/4" to 2" Chain Lever - Horizontal 1" to 2" Grounded Ball & Stem 3/4" to 2" BSPP (Parallel) Thread Connection 1/4" to 2" BSPT (Tapered) Thread Connection 1/4" to 2" For Pressure/Temperature Ratings, Refer to Page M-8, Graph No. 3 COPYRIGHT ©2003 CONBRACO IND., INC. – PRINTED IN U.S.A. Prev. Page | Next C-3 92-100 Series Carbon Steel Uni-Body Saturn Ball Valve ® Threaded, 1/4" to 1" 2000 psig WOG, 1-1/4" to 2" 1500 psig WOG, Cold Non-Shock. 150 psig Saturated Steam. Vacuum Service to 29 inches Hg. Federal Specification: WW-V-35C, Type: II, Composition: CS, Style: 3. MSS SP-110; Ball Valves Threaded, Socket-Welding, Solder Joint, Grooved and Flared Ends. FEATURES • (-24) Certified to API standard 607, 4th Edition, Class 600 burn • Investment cast body • RPTFE seats and seals • Blow-out-proof stem design • Nitride corrosion protection • Adjustable packing gland • Meets NACE MR-01-75 with SS trim • Chromium plated ball • Compact STANDARD MATERIAL LIST 1. Lever and grip 2. Stem packing 3. Stem bearing 4. Ball 5. Seat (2) Steel, zinc plated w/vinyl RPTFE RPTFE A108-CS, chrome plated RPTFE 6. Retainer 7. Gland nut 8. Stem 9. Lever nut (Screw 1/4" to 1/2") 10. Body A108-CS A108-CS A108-CS Steel, zinc plated A216-WCB VARIATIONS AVAILABLE: 92-140 Series (316 SS Ball & Stem) OPTIONS AVAILABLE: CARBON STEEL UNI-BODY SATURN® BALL VALVE NUMBER 92-101-01 92-102-01 92-103-01 92-104-01 92-105-01 92-106-01 92-107-01 92-108-01 C-4 SIZE 1/4" 3/8" 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" Back A .37 .37 .37 .50 .62 .81 1.00 1.25 B 1.14 1.14 1.14 1.32 1.51 1.79 1.95 2.28 C 2.21 2.21 2.21 2.70 3.03 3.62 4.00 4.73 D 1.68 1.68 1.68 1.75 2.00 2.18 2.62 2.81 E 3.87 3.87 3.87 3.87 4.87 4.87 5.50 5.50 Wt. .49 .49 .49 .76 1.21 1.95 2.92 4.73 (SUFFIX) -02-03-04-07-08-10-14-15-16-24-27-30-32-40-45-46to 2" -47-48-50-58-60-65-P01-T01- OPTION SIZES Static Grounded 1/4" to 2" 1-1/4" CS Stem Extension 1/4" to 2" 2-1/4" CS Stem Extension 1/4" to 2" Steel Tee Handle 1/4" to 2" 90º Reversed Stem 3/4" to 2" SS Lever & Nut 1/4" to 2" Side Vented Ball (Uni-Directional) 1/4" to 2" Wheel Handle, Steel 1/4" to 2" Chain Lever - Vertical 1" to 2" Graphite Packing 1/4" to 2" SS Latch-Lock Lever & Nut 1/4" to 2" Cam-Lock Handle & Grounded 1/4" to 2" SS Tee Handle & Nut 1/4" to 2" Cyl-Loc & Grounded 3/4" to 2" Less Lever & Nut 1/4" to 2" Latch Lock Lever - Lock in Closed Position Only 1/2" SS Oval Latch-Lock Handle & Nut SS Oval Handle 2-1/4" CS Locking Stem Extension Chain Lever - Horizontal Grounded Ball & Stem Multifill Seats & Graphite Packing BSPP (Parallel) Thread Connection BSPT (Tapered) Thread Connection 1/4" to 1-1/4" 1/4" to 2" 3/4" to 2" 1" to 2" 3/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" For Pressure/Temperature Ratings, Refer to Page M-12, Graph No. 13 (1/4" to 1") Refer to Page M-11, Graph No. 11 (1-1/4" to 2") COPYRIGHT ©2003 CONBRACO IND., INC. – PRINTED IN U.S.A. Prev. Page | Next 93-100 Series Carbon Steel Uni-Body Saturn Ball Valve ® Threaded, 1/4" to 1" 2000 psig WOG, 1-1/4" to 2" 1500 psig WOG, Cold Non-Shock. 150 psig Saturated Steam. Federal Specification: WW-V-35C, Type: II, Composition: CS, Style: 3. MSS SP-110; Ball Valves Threaded, Socket-Welding, Solder Joint, Grooved and Flared Ends. FEATURES • (-24) Certified to API standard 607, 4th Edition, Class 600 burn • Uni-body barstock steel design • RPTFE seats and seals • Blow-out-proof stem design • Adjustable packing gland • Compact • Chromium plated ball • Nitride corrosion protection STANDARD MATERIAL LIST 1. Lever and grip 2. Stem packing 3. Stem bearing 4. Ball 5. Seat (2) Steel, zinc plated w/vinyl RPTFE RPTFE A108-CS chrome plated RPTFE 6. Retainer 7. Gland nut 8. Stem 9. Lever nut (Screw 1/4" to 1/2") 10. Body A108-CS A108-CS A108-CS zinc plated Steel, zinc plated A108-CS VARIATIONS AVAILABLE: 93-140 Series (316 SS Ball & Stem) OPTIONS AVAILABLE: (SUFFIX) -02-03-04-07-08-10-14-15-19-24-45-60-P01-T01- OPTION Static Grounded 1-1/4" CS Stem Extension 2-1/4" CS Stem Extension Steel Tee Handle 90º Reversed Stem SS Lever & Nut Side Vented Ball (Uni-Directional) Wheel Handle, Steel Lock Plate (Suggest “92") Graphite Packing Less Lever & Nut Grounded Ball & Stem BSPP (Parallel) Thread Connection BSPT (Tapered) Thread Connection SIZES 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 3/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 1-1/2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 3/4" to 2" 1/4" to 2" 1/4" to 2" CARBON STEEL UNI-BODY SATURN® BALL VALVE NUMBER 93-101-01 93-102-01 93-103-01 93-104-01 93-105-01 93-106-01 93-107-01 93-108-01 SIZE 1/4" 3/8" 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" Back A .37 .37 .37 .50 .62 .81 1.00 1.25 B 1.14 1.14 1.14 1.31 1.50 1.81 2.00 2.43 C 2.18 2.18 2.18 2.65 3.03 3.62 4.00 4.71 D 1.68 1.68 1.68 1.75 2.00 2.18 2.62 2.93 E 3.68 3.68 3.68 3.68 4.87 4.87 5.50 5.50 Wt. .56 .56 .56 .79 1.27 2.26 3.57 5.94 For Pressure/Temperature Ratings, Refer to Page M-12, Graph No. 13 (1/4" to 1") Refer to Page M-11, Graph No. 11 (1-1/4" to 2") COPYRIGHT ©2003 CONBRACO IND., INC. – PRINTED IN U.S.A. Prev. Page | Next C-5 96-100 Series Stainless Steel Uni-Body Saturn Ball Valve Threaded, 1/4" to 1" 2000 psig WOG, 1-1/4" to 2" 1500 psig WOG, Cold Non-Shock. 150 psig Saturated Steam. Vacuum Service to 29 inches Hg. Federal Specification: WW-V-35C, Type: II, Composition: SS, Style: 3. MSS SP-110; Ball Valves Threaded, Socket-Welding, Solder Joint, Grooved and Flared Ends. FEATURES • (-24) Certified to API standard 607, 4th Edition, Class 600 burn • Investment cast body • RPTFE seats and seals • Blow-out-proof stem design • Adjustable packing gland • Meets NACE MR-01-75 • Compact STANDARD MATERIAL LIST 1. Lever and grip 2. Stem packing 3. Stem bearing 4. Ball 5. Seat (2) 304 SS w/vinyl RPTFE RPTFE A276-316 RPTFE 6. Retainer 7. Gland nut 8. Stem 9. Lever nut (Screw 1/4" to 1/2") 10. Body A276-316 A276-316 A276-316 18-8 SS A351-CF8M OPTIONS AVAILABLE: (SUFFIX) -02-03-04-07-08-14-15-16-24-27-30-32-40-45-47-49-57-58-60- OPTION Stem Grounded 1-1/4" CS Stem Extension 2-1/4" CS Stem Extension Steel Tee Handle 90º Reversed Stem Side Vented Ball (Uni-Directional) Wheel Handle, Steel Chain Lever - Vertical Graphite Packing SS Latch-Lock Lever & Nut Cam-Lock Handle & Grounded SS Tee Handle & Nut Cyl-Loc & Grounded Less Lever & Nut SS Oval Latch-Lock Handle & Nut Assembled Dry Oxygen Cleaned Chain Lever - Horizontal Grounded Ball & Stem SIZES 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 3/4" to 2" 1/4" to 2" 1/4" to 2" 1" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 3/4" to 2" 1/4" to 2" 1/4" to 1-1/4" 1/4" to 2" 1/4" to 2" 1" to 2" 3/4" to 2" AAR Approval No. E989054 STAINLESS STEEL UNI-BODY SATURN BALL VALVE NUMBER 96-101-01 96-102-01 96-103-01 96-104-01 96-105-01 96-106-01 96-107-01 96-108-01 C-6 SIZE 1/4" 3/8" 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" Back A .37 .37 .37 .50 .62 .81 1.00 1.25 B 1.14 1.14 1.14 1.32 1.51 1.79 1.95 2.28 C 2.21 2.21 2.21 2.70 3.03 3.62 4.00 4.73 D 1.68 1.68 1.68 1.75 2.00 2.18 2.62 2.81 E 3.87 3.87 3.87 3.87 4.87 4.87 5.50 5.50 Wt. .49 .49 .49 .76 1.21 1.95 2.92 4.73 For Pressure/Temperature Ratings, Refer to Page M-12, Graph No. 14 (1/4" to 1") Refer to Page M-11, Graph No. 12 (1-1/4" to 2") COPYRIGHT ©2003 CONBRACO IND., INC. – PRINTED IN U.S.A. Prev. Page | Next SECTION D CONTENTS ANSI FLANGED BALL VALVES DESCRIPTION PAGE(S) Features and Benefits D-A Variations Available D-B 87A-100 Series, ANSI Class 150 Flanged Stainless Steel D-1, 2, 3, 4 87A-200 Series, ANSI Class 150 Flanged Full Port Stainless Steel D-5, 6, 7, 8 87A-700 Series, ANSI Class 300 Flanged Stainless Steel D-9, 10, 11, 12 87A-900 Series, ANSI Class 300 Flanged Full Port Stainless Steel D-13, 14, 15, 16 87B-100 Series, ANSI Class 150 Flanged Uni-Body Stainless Steel D-17, 18 88A-100 Series, ANSI Class 150 Flanged Carbon Steel D-19, 20, 21, 22 88A-200 Series, ANSI Class 150 Flanged Full Port Carbon Steel D-23, 24, 25, 26 88A-700 Series, ANSI Class 300 Flanged Carbon Steel D-27, 28, 29, 30 88A-900 Series, ANSI Class 300 Flanged Full Port Carbon Steel D-31, 32, 33, 34 88B-100 Series, ANSI Class 150 Flanged Uni-Body Carbon Steel D-35, 36 87-100 Series, ANSI Class 150 Flanged Stainless Steel D-37 88-100 Series, ANSI Class 150 Flanged Carbon Steel D-38 87A-500 Series, ANSI Class 150 Flanged Full Port Alloy 20 D-39 87A-400 Series, ANSI Class 150 Flanged Alloy 20 Back D-40, 41, 42 Prev. Page | Next ANSI Flanged Ball Valves 87A, 87B, 88A and 88B Series Features and Benefits STANDARDS COMPLIANCE Except where specifically noted all valves within this family of products complies with the requirements of this listed standard. ASME B16.5 - ”Pipe Flanges and Flanged Fittings” ASME B16.10 - ”Face to Face Dimensions of Valves” ASME B16.34 - ”Valves - Flanged, Threaded, and Welding End” ASME B16.33 - “Manual Operated Metallic Gas Valves for Use in Gas Piping Systems up to 125 psig” ASME B16.38 - “Large Metallic Valves for Gas Distribution (Manually Operated NPS 2-1/2” to 12”, 125 psig)” ASME B31.1 - “Power Piping” ASME B31.3 - “Chemical Plant and Petroleum Refinery Piping” ASME B31.8 - “Gas Transmission and Distribution Piping Systems” API 607 ”Fire Test - Soft Seated Quarter Turn Valves” (-24 Option Required) API 608 ”Ball Valves - Flanged, Threaded, and Welding End” MSS SP-25 ”Standard Marking System for Valves” MSS SP-61 ”Pressure Testing of Steel Valves” MSS SP-72 ”Ball Valves with Flanged or Buttweld Ends” UL 125 “Valves for Anhydrous Ammonia and LP-Gas (Other than Safety Relief)” STANDARD FEATURES Except where specifically noted all valves within this family of products include all listed features as standard. Two Position Locking Device (Valves 6" FP and smaller, 8" SP and smaller) CHV Style Adjustable Stem Seals Four Point ISO 5211 Mounting Pad Bolt Pattern Slot Vented Ball for Thermal Expansion Rated 150 psig Saturated Steam Anti-static Grounded Ball and Stem Blow-out Proof Stem Design Cast Boss for Bleed / Drain Port Vacuum Service to 29 inches of Hg NACE MR0175-2000 Compliance on all 87A/87B PRODUCT APPROVALS AAR CSA UL Approval No. E989052 (87A-108-24, 88A-108-24 & 88A-148-24) Approval No. E989053 (87A-100-24, 88A-100-24 & 88A-140-24) (Reference: ASME B16.33 & B16.38) (Reference: Control Number 195H) UL (YSDT) LP-Gas Shut-Off Valves UL (MHKZ) Manual Valves UL (YRBX) Flammable Liquid Shut-Off Valves UL (YRPV) Gas Shut-Off Valves UL (YQNZ) Compressed Gas Shut-Off Valves UL (YQAR) Anhydrous Ammonia Shut-Off Valves Back COPYRIGHT ©2003 CONBRACO IND., INC. – PRINTED IN U.S.A. Prev. Page | Next D-A ANSI Flanged Ball Valves VARIATIONS AVAILABLE: Reference Data: Alloy Series Flanged Ball Valves Port ANSI Class Dimensional Data Page Stainless Steel Alloy 20 Hastelloy Nickel Cu-Ni 1-1/2" & 2" Standard 150 D-1 87A-10X 87A-40X 87H-1HX 87N-1NX 87M-13X 2-1/2" & 3" Standard 150 D-2 87A-10X 87A-40X 87H-1HX 87N-1NX 87M-13X 4", 6" & 8" Standard 150 D-3 87A-10X 87A-40X 87H-1HX 87N-1NX 87M-13X 10" Standard 150 D-4 87A-10X 87A-40X 87H-1HX 87N-1NX 87M-13X 1/2", 3/4" & 1" Full 150 D-5 87A-20X 87A-50X 87H-2HX 87N-2NX 87M-23X 1-1/2", 2" & 2-1/2" Full 150 D-6 87A-20X 87A-50X 87H-2HX 87N-2NX 87M-23X 3", 4", & 6" Full 150 D-7 87A-20X 87A-50X 87H-2HX 87N-2NX 87M-23X 8", 10" & 12" Full 150 D-8 87A-20X 87A-50X 87H-2HX 87N-2NX 87M-23X 1-1/2" & 2" Standard 300 D-9 87A-70X 87A-80X 87H-7HX 87N-7NX 87M-73X 2-1/2" & 3" Standard 300 D-10 87A-70X 87A-80X 87H-7HX 87N-7NX 87M-73X 4", 6" & 8" Standard 300 D-11 87A-70X 87A-80X 87H-7HX 87N-7NX 87M-73X 10" Standard 300 D-12 87A-70X 87A-80X 87H-7HX 87N-7NX 87M-73X 1/2", 3/4" & 1" Full 300 D-13 87A-90X 87A-60X 87H-9HX 87N-9NX 87M-93X 1-1/2", 2" & 2-1/2" Full 300 D-14 87A-90X 87A-60X 87H-9HX 87N-9NX 87M-93X 3", 4", & 6" Full 300 D-15 87A-90X 87A-60X 87H-9HX 87N-9NX 87M-93X 8", 10" & 12" Full 300 D-16 87A-90X 87A-60X 87H-9HX 87N-9NX 87M-93X Size Alloy Material of Construction for Pressure Containing / Retaining Components Alloy Valves Series Body Retainer Ball Stem Fasteners D-B Back Stainless Steel Alloy 20 Hastelloy Nickel Ni-Cu Alloy 87A-100/200, 87A-400/500, 87H-1H0/2H0, 87N-1N0/2N0, 87M-130/230, 87A-700/900 87A-600/800 87H-7H0/9H0 87N-7N0/9N0 87M-730/930 A351-CF8M A351-CN7M A494-CW12MW A494-CZ100 A494-M35-1 A351-CF8M or A351-CN7M or A494-CW12MW A494-CZ100 or A494-M35-1 or A276-316 B473-N08020 or B574-C276 B160-200 B164-K400 A351-CF8M or A351-CN7M or A494-CW12MW A494-CZ100 or A494-M35-1 or A276-316 B473-N08020 or B574-C276 B160-200 B164-K400 A276-316 B473-N08020 B574-C276 B160-200 B164-K400 A193-B8M, A193-B8M, A193-B8M, A193-B8M, A193-B8M, A194-Gr8 A194-Gr8 A194-Gr8 A194-Gr8 A194-Gr8 COPYRIGHT ©2003 CONBRACO IND., INC. – PRINTED IN U.S.A. Prev. Page | Next 87A-100 Series Stainless Steel ANSI Class 150 Flanged Std. Port Ball Valve 1-1/2" through 2" STANDARDS COMPLIANCE STANDARD FEATURES Refer to page D-A Refer to page D-A MATERIALS OF CONSTRUCTION OPTIONS AVAILABLE: Description 1. Body 2. Retainer 3. Ball 4. Stem 5. Packing Gland 6. Stem Seals 7. Seats 8. Gland Screws 9. Gland Plate 10. Stem Nut 11. Lever 12. Stem Bearing 13. Stop 14. Stop Screw 15. Lock Plate 16. Body Seal 17. Lockwasher 18. Grounding Spring (SUFFIX) -01-14-15-21-24-35-38-49-57-60-65-67-69-70-73-74-76-80- Material ASTM A351 CF8M ASTM A276 Type 316 ASTM A276 Type 316 ASTM A276 Type 316 ASTM A276 Type 316 PTFE RPTFE ASTM A193 B8 Class 1 302 or 304 SS 316 SS 302 or 304 SS with Vinyl Grip RPTFE ASTM A276 Type 316 18-8 SS 302 or 304 SS RPTFE 302 or 304 SS SS OPTION Standard Side Vented Ball (Uni-Directional) Wheel Handle, Steel UHMWPE Seats Fire Safe (Graphite Packing and Seal) PTFE Seats and Seals PEEK Seats and Graphite Packing Assembled Dry Oxygen Cleaned Grounded Ball and Stem MPTFE Seats and Graphite Packing Cleaned For Industrial Gases Drilled and Tapped Purge Port with Plug 4” Extended Bonnet 316 SS Spiral Wound Gaskets w/PTFE Filler 316 SS Spiral Wound Gaskets w/Graphite Filler Live Loaded 87A/88A Series (Lever) Multi-Seal (Super TFE) 87A/88A Series For Pressure/Temperature Ratings, Refer to Page M-7, Graph No. 2 NUMBER SIZE 87A-107-01A 1-1/2" 87A-108-01 2" Back A 1.25 1.50 B 6.50 7.00 C 3.69 3.69 D 3.62 4.62 E 6.03 6.65 F 0.47 0.72 G 1.62 2.41 H 2.15 3.09 I 1.392 1.949 COPYRIGHT ©2003 CONBRACO IND., INC. – PRINTED IN U.S.A. J 0.696 0.974 K 0.500 0.625 L M 0.287 1/4-20 0.412 5/16-18 N 1.50 2.00 Prev. Page | Next WT. 9.0 18.0 D-1 87A-100 Series Stainless Steel ANSI Class 150 Flanged Std. Port Ball Valve 2-1/2" through 3" STANDARDS COMPLIANCE STANDARD FEATURES Refer to page D-A Refer to page D-A MATERIALS OF CONSTRUCTION OPTIONS AVAILABLE: Description 1. Body 2. Retainer 3. Ball 4. Stem 5. Packing Gland 6. Stem Seals 7. Seats 8. Gland Screws 9. Gland Plate 10. Stem Nut 11. Lever 12. Stem Bearing 13. Stop 14. Stop Screw 15. Lock Plate 16. Body Seal 17. Grounding Spring 18. Body Joint Stud 19. Body Joint Nut 20. Lockwasher (SUFFIX) -01-14-21-24-35-38-49-57-60-65-67-69-70-73-74-76-80-MG-MH- Material ASTM A351 CF8M ASTM A351 CF8M ASTM A276 Type 316 or A351 CF8M ASTM A276 Type 316 ASTM A276 Type 316 PTFE RPTFE ASTM A193 B8 Class 1 316 SS 18-8 SS 316 SS RPTFE ASTM A276 Type 316 316 SS 302 or 304 SS RPTFE SS ASTM A194 Grade B8M ASTM A194 Grade 8 302 or 304 SS -MJ-MK- OPTION Standard Side Vented Ball (Uni-Directional) UHMWPE Seats Fire Safe (Graphite Packing and Seal) PTFE Seats and Seals PEEK Seats and Graphite Packing Assembled Dry Oxygen Cleaned Grounded Ball and Stem MPTFE Seats and Graphite Packing Cleaned For Industrial Gases Drilled and Tapped Purge Port with Plugs 4” Extended Bonnet 316 SS Spiral Wound Gaskets w/PTFE Filler 316 SS Spiral Wound Gaskets w/Graphite Filler Live Loaded 87A/88A Series (Lever) Multi-Seal (Super TFE) 87A/88A Series Gear Operator with Standard Handwheel Gear Operator with Standard Handwheel & Locking Device Gear Operator with Oversize Handwheel Gear Operator with Oversize Handwheel & Locking Device For Pressure/Temperature Ratings, Refer to Page M-7, Graph No. 2 NUMBER SIZE 87A-109-01 2-1/2" 87A-100-01 3" D-2 Back A 2.00 2.50 B 7.50 8.00 C 3.50 3.51 D 5.61 6.23 E 8.40 8.40 F 0.80 0.80 G 3.31 3.93 H 4.08 4.70 I 1.949 1.949 COPYRIGHT ©2003 CONBRACO IND., INC. – PRINTED IN U.S.A. J 0.974 0.974 K 0.750 0.750 L 0.477 0.477 M 5/16-18 5/16-18 Prev. Page | N 2.50 3.00 Next WT. 27.0 34.0 87A-100 Series Stainless Steel ANSI Class 150 Flanged Std. Port Ball Valve 4" through 8" STANDARDS COMPLIANCE STANDARD FEATURES Refer to page D-A Refer to page D-A MATERIALS OF CONSTRUCTION OPTIONS AVAILABLE: Description 1. Body 2. Retainer 3. Ball 4. Stem 5. Packing Gland 6. Stem Seals 7. Seats 8. Gland Screws 9. Gland Plate 10. Adapter Screw 11. Handle Adapter 12. Stem Bearing 13. Stop 14. Stop Screw 15. Lock Plate 16. Body Seal 17. Grounding Spring 18. Body Joint Stud 19. Body Joint Nut 20. Lockwasher 21. Pipe Handle (SUFFIX) -01-14-21-24-35-49-57-60-65-67-69-70-73-74-76-80-MG-MH- Material ASTM A351 CF8M ASTM A351 CF8M ASTM A276 Type 316 or A351 CF8M ASTM A276 Type 316 ASTM A276 Type 316 PTFE RPTFE ASTM A193 B8 Class 1 316 SS 18-8 SS 316 SS RPTFE ASTM A276 Type 316 316 SS 302 or 304 SS RPTFE SS ASTM A194 Grade B8M ASTM A194 Grade 8 302 or 304 SS Galvanized Steel (not Shown) -MJ-MK- OPTION Standard Side Vented Ball (Uni-Directional) UHMWPE Seats Fire Safe (Graphite Packing and Seal) PTFE Seats and Seals Assembled Dry Oxygen Cleaned Grounded Ball and Stem MPTFE Seats and Graphite Packing Cleaned For Industrial Gases Drilled and Tapped Purge Ports with Plugs Extended Bonnet 316 SS Spiral Wound Gaskets w/PTFE Filler 316 SS Spiral Wound Gaskets w/Graphite Filler Live Loaded 87A/88A Series (Lever) Multi-Seal (Super TFE) 87A/88A Series Gear Operator with Standard Handwheel Gear Operator with Standard Handwheel & Locking Device Gear Operator with Oversize Handwheel Gear Operator with Oversize Handwheel & Locking Device For Pressure/Temperature Ratings, Refer to Page M-7, Graph No. 2 NUMBER 87A-10A-01 87A-10C-01 87A-10E-01 SIZE 4" 6" 8" Back A 3.00 4.00 6.00 B 9.00 10.50 18.00 C 4.18 4.69 9.00 D 8.80 9.99 13.73 E 3.88 5.13 7.00 F 0.50 0.50 1.00 G 4.75 5.94 7.75 H 5.95 7.13 9.48 I 2.840 2.840 4.596 COPYRIGHT ©2003 CONBRACO IND., INC. – PRINTED IN U.S.A. J 1.420 1.420 2.298 K 1.250 1.250 2.000 L 0.725 0.725 1.375 M 3/8-16 3/8-16 3/4-10 Prev. Page | N WT. 4.00 73.0 6.00 117.0 8.00 310.0 Next D-3 87A-100 Series Stainless Steel ANSI Class 150 Flanged Std. Port Ball Valve 10" STANDARDS COMPLIANCE STANDARD FEATURES Refer to page D-A Refer to page D-A MATERIALS OF CONSTRUCTION OPTIONS AVAILABLE: Description 1. Body 2. Retainer 3. Ball 4. Stem 5. Packing Gland 6. Stem Seals 7. Seats 8. Gland Screws 9. Gland Plate 10. Stem Bearing 11. Body Seal 12. Body Joint Stud 13. Body Joint Nut (SUFFIX) -01-14-21-24-35-49-57-60-65-69-70-76-80-MG-MH- Material ASTM A351 CF8M ASTM A351 CF8M ASTM A276 Type 316 or A351 CF8M ASTM A276 Type 316 ASTM A276 Type 316 PTFE RPTFE ASTM A193 B8 Class 1 316 SS RPTFE RPTFE ASTM A193 Grade B8M ASTM A194 Grade 8 -MJ-MK- OPTION Standard Side Vented Ball (Uni-Directional) UHMWPE Seats Fire Safe (Graphite Packing and Seal) PTFE Seats and Seals Assembled Dry Oxygen Cleaned Grounded Ball and Stem MPTFE Seats and Graphite Packing Drilled and Tapped Purge Port with Plugs Extended Bonnet Live Loaded 87A/88A Series (Lever) Multi-Seal (Super TFE) 87A/88A Series Gear Operator with Standard Handwheel Gear Operator with Standard Handwheel & Locking Device Gear Operator with Oversize Handwheel Gear Operator with Oversize Handwheel & Locking Device For Pressure/Temperature Ratings, Refer to Page M-7, Graph No. 2 NUMBER SIZE 87A-10G-01 10" D-4 Back A 8.00 B 21.00 C 10.37 D 12.96 E 9.18 F 1.00 G 10.22 H 4.596 I 2.298 COPYRIGHT ©2003 CONBRACO IND., INC. – PRINTED IN U.S.A. J 2.000 K 1.375 L 3/4-10 M 10.00 Prev. Page | Next 87A-200 Series Stainless Steel ANSI Class 150 Flanged Full Port Ball Valve 1/2" through 1" STANDARDS COMPLIANCE STANDARD FEATURES Refer to page D-A Refer to page D-A MATERIALS OF CONSTRUCTION OPTIONS AVAILABLE: Description 1. Body 2. Retainer 3. Ball 4. Stem 5. Packing Gland 6. Stem Seals 7. Seats 8. Gland Screws 9. Gland Plate 10. Stem Nut 11. Lever 12. Stem Bearing 13. Stop 14. Stop Screw 15. Lock Plate 16. Body Seal 17. Lockwasher 18. Grounding Spring (SUFFIX) -01-14-15-21-24-35-38-49-57-60-65-67-69-70-73-74-80- Material ASTM A351 CF8M ASTM A276 Type 316 ASTM A276 Type 316 ASTM A276 Type 316 ASTM A276 Type 316 PTFE RPTFE ASTM A193 B8 Class 1 302 or 304 SS 316 SS 302 or 304 with Vinyl Grip RPTFE ASTM A276 Type 316 18-8 SS 302 or 304 SS RPTFE 302 or 304 SS SS OPTION Standard Side Vented Ball (Uni-Directional) Wheel Handle, Steel UHMWPE Seats Fire Safe (Graphite Packing and Seal) PTFE Seats and Seals PEEK Seats and Graphite Packing Assembled Dry Oxygen Cleaned Grounded Ball and Stem MPTFE Seats and Graphite Packing Cleaned For Industrial Gases Drilled and Tapped Purge Port with Plugs 4” Extended Bonnet – N/A in 1/2” and 3/4” 316 SS Spiral Wound Gaskets w/PTFE Filler 316 SS Spiral Wound Gaskets w/Graphite Filler Multi-Seal (Super TFE) 87A/88A Series For Pressure/Temperature Ratings, Refer to Page M-7, Graph No. 2 NUMBER 87A-203-01 87A-204-01 87A-205-01 SIZE 1/2" 3/4" 1" Back A 0.50 0.75 1.00 B 4.25 4.62 5.00 C 2.06 2.18 2.32 D 3.28 3.89 3.62 E 5.14 5.56 6.03 F .30 .39 0.47 G 1.09 1.65 1.62 H 1.38 1.96 2.15 I 1.002 1.392 1.392 COPYRIGHT ©2003 CONBRACO IND., INC. – PRINTED IN U.S.A. J .501 .696 0.696 K .376 .500 0.500 L .245 .287 0.287 M 10-24 1/4-20 1/4-20 Prev. Page | WT. 5.0 6.0 7.0 Next D-5 87A-200 Series Stainless Steel ANSI Class 150 Flanged Full Port Ball Valve 1-1/2" through 2-1/2" STANDARDS COMPLIANCE STANDARD FEATURES Refer to page D-A Refer to page D-A MATERIALS OF CONSTRUCTION OPTIONS AVAILABLE: Description 1. Body 2. Retainer 3. Ball 4. Stem 5. Packing Gland 6. Stem Seals 7. Seats 8. Gland Screws 9. Gland Plate 10. Adapter Screw 11. Lever 12. Stem Bearing 13. Stop 14. Stop Screw 15. Lock Plate 16. Body Seal 17. Grounding Spring 18. Body Joint Stud 19. Body Joint Nut 20. Lockwasher (SUFFIX) -01-14-21-24-35-38-49-57-60-65-67-69-70-73-74-80-MG-MH- Material ASTM A351 CF8M ASTM A351 CF8M ASTM A276 Type 316 or A351 CF8M ASTM A276 Type 316 ASTM A276 Type 316 PTFE RPTFE ASTM A193 B8 Class 1 316 SS 18-8 SS 316 SS RPTFE ASTM A276 Type 316 316 SS 302 or 304 SS RPTFE SS ASTM A193 Grade B8M ASTM A194 Grade 8 302 or 304 SS -MJ-MK- OPTION Standard Side Vented Ball (Uni-Directional) UHMWPE Seats Fire Safe (Graphite Packing and Seal) PTFE Seats and Seals PEEK Seats and Graphite Packing (3" Only) Assembled Dry Oxygen Cleaned Grounded Ball and Stem MPTFE Seats and Graphite Packing Cleaned For Industrial Gases Drilled and Tapped Purge Ports with Plugs 4" Extended Bonnet 316 SS Spiral Wound Gaskets w/PTFE Filler 316 SS Spiral Wound Gaskets w/Graphite Filler Multi-Seal (Super TFE) 87A/88A Series Gear Operator with Standard Handwheel Gear Operator with Standard Handwheel & Locking Device Gear Operator with Oversize Handwheel Gear Operator with Oversize Handwheel & Locking Device For Pressure/Temperature Ratings, Refer to Page M-7, Graph No. 2 NUMBER SIZE 87A-207-01 1-1/2" 87A-208-01 2" 87A-209-01 2-1/2" D-6 Back A 1.50 2.00 2.50 B 6.50 7.00 7.50 C 3.00 3.04 3.34 D 4.62 5.61 6.23 E 6.65 8.40 8.40 F 0.72 0.80 0.80 G 2.41 3.31 3.93 H 3.09 4.08 4.70 I 1.949 1.949 1.949 COPYRIGHT ©2003 CONBRACO IND., INC. – PRINTED IN U.S.A. J 0.974 0.974 0.974 K 0.625 0.750 0.750 L 0.412 0.477 0.477 M 5/16-18 5/16-18 5/16-18 Prev. Page | WT. 14.0 25.0 30.0 Next 87A-200 Series Stainless Steel ANSI Class 150 Flanged Full Port Ball Valve 3" through 6" STANDARDS COMPLIANCE STANDARD FEATURES Refer to page D-A Refer to page D-A MATERIALS OF CONSTRUCTION OPTIONS AVAILABLE: Description 1. Body 2. Retainer 3. Ball 4. Stem 5. Packing Gland 6. Stem Seals 7. Seats 8. Gland Screws 9. Gland Plate 10. Adapter Screw 11. Handle Adapter 12. Stem Bearing 13. Stop 14. Stop Screw 15. Lock Plate 16. Body Seal 17. Grounding Spring 18. Body Joint Stud 19. Body Joint Nut 20. Pipe Handle (SUFFIX) -01-14-21-24-35-38-49-57-60-65-67-69-70-73-74-76-80-MG-MH- Material ASTM A351 CF8M ASTM A351 CF8M ASTM A276 Type 316 or A351 CF8M ASTM A276 Type 316 ASTM A276 Type 316 PTFE RPTFE ASTM A193 B8 Class 1 316 SS 18-8 SS 316 with Vinyl Grip RPTFE ASTM A276 Type 316 316 SS 302 or 304 SS RPTFE SS ASTM A193 Grade B8M ASTM A194 Grade 8 Galvanized Steel (not shown) -MJ-MK- OPTION Standard Side Vented Ball (Uni-Directional) UHMWPE Seats Fire Safe (Graphite Packing and Seal) PTFE Seats and Seals PEEK Seats and Graphite Packing (3" Only) Assembled Dry Oxygen Cleaned Grounded Ball and Stem MPTFE Seats and Graphite Packing Cleaned For Industrial Gases Drilled and Tapped Purge Ports with Plugs Extended Bonnet 316 SS Spiral Wound Gaskets w/PTFE Filler 316 SS Spiral Wound Gaskets w/Graphite Filler Live Loaded 87A/88A Series (Lever) Multi-Seal (Super TFE) 87A/88A Series Gear Operator with Standard Handwheel Gear Operator with Standard Handwheel & Locking Device Gear Operator with Oversize Handwheel Gear Operator with Oversize Handwheel & Locking Device For Pressure/Temperature Ratings, Refer to Page M-7, Graph No. 2 NUMBER 87A-200-01 87A-20A-01 87A-20C-01 SIZE 3" 4" 6" Back A 3.00 4.00 6.00 B 8.00 9.00 15.50 C 3.68 3.94 7.19 D 8.80 9.99 13.73 E 3.88 5.13 7.00 F 0.50 0.50 1.00 G 4.75 5.94 7.75 H 5.95 7.13 9.48 I 2.840 2.840 4.596 COPYRIGHT ©2003 CONBRACO IND., INC. – PRINTED IN U.S.A. J 1.420 1.420 2.298 K 1.250 1.250 2.000 L 0.725 0.725 1.375 M 3/8-16 3/8-16 3/4-10 Prev. Page | WT. 60.0 91.0 248.0 Next D-7 87A-200 Series Stainless Steel ANSI Class 150 Flanged Full Port Ball Valve 8" through 12" STANDARDS COMPLIANCE STANDARD FEATURES Refer to page D-A Refer to page D-A MATERIALS OF CONSTRUCTION OPTIONS AVAILABLE: Description 1. Body 2. Retainer 3. Ball 4. Stem 5. Packing Gland 6. Stem Seals 7. Seats 8. Gland Screws 9. Gland Plate 10. Stem Bearing 11. Body Seal 12. Body Joint Stud 13. Body Joint Nut (SUFFIX) -01-14-21-24-35-49-57-60-65-69-70-76-80-MG-MH- Material ASTM A351 CF8M ASTM A351 CF8M ASTM A276 Type 316 or A351 CF8M ASTM A276 Type 316 ASTM A276 Type 316 PTFE RPTFE ASTM A193 B8 Class 1 316 SS RPTFE RPTFE ASTM A193 Grade B8M ASTM A194 Grade 8 -MJ-MK- OPTION Standard Side Vented Ball (Uni-Directional) UHMWPE Seats Fire Safe (Graphite Packing and Seal) PTFE Seats and Seals Assembled Dry Oxygen Cleaned Grounded Ball and Stem MPTFE Seats and Graphite Packing Drilled and Tapped Purge Ports with Plugs Extended Bonnet (8" Only) Live Loaded 87A/88A Series (Lever) Multi-Seal (Super TFE) 87A/88A Series Gear Operator with Standard Handwheel Gear Operator with Standard Handwheel & Locking Device Gear Operator with Oversize Handwheel Gear Operator with Oversize Handwheel & Locking Device For Pressure/Temperature Ratings, Refer to Page M-7, Graph No. 2 NUMBER SIZE 87A-20E-01 8" 87A-20G-01 10" 87A-20H-01 12" D-8 Back A 8.00 10.00 12.00 B 18.00 21.00 24.00 C 8.88 10.26 12.09 D 12.96 17.20 19.31 E 9.18 11.33 13.40 F 1.00 2.25 2.25 G 10.22 12.80 14.92 COPYRIGHT ©2003 CONBRACO IND., INC. – PRINTED IN U.S.A. Prev. Page | Next 87A-700 Series Stainless Steel ANSI Class 300 Flanged Std. Port Ball Valve 1-1/2" through 2" STANDARDS COMPLIANCE STANDARD FEATURES Refer to page D-A Refer to page D-A MATERIALS OF CONSTRUCTION OPTIONS AVAILABLE: Description 1. Body 2. Retainer 3. Ball 4. Stem 5. Packing Gland 6. Stem Seals 7. Seats 8. Gland Screws 9. Gland Plate 10. Stem Nut 11. Lever 12. Stem Bearing 13. Stop 14. Stop Screw 15. Lock Plate 16. Body Seal 17. Lockwasher 18. Grounding Spring (SUFFIX) -01-14 -15-21 -24 -35 -38-49-57-60-65-67-69-70-73-74-76-80- Material ASTM A351 CF8M ASTM A276 Type 316 ASTM A276 Type 316 ASTM A276 Type 316 ASTM A276 Type 316 PTFE RPTFE ASTM A193 B8 Class 1 302 & 304 SS 316 SS 302 & 304 SS with Vinyl Grip RPTFE ASTM A276 Type 316 18-8 SS 302 or 304 SS RPTFE 302 or 304 SS SS OPTION Standard Side Vented Ball (See Page J-2) Wheel Handle, Steel UHMWPE Seats Fire Safe (Graphite Packing and Seal) PTFE Seats and Seals PEEK Seats and Graphite Packing Assembled Dry Oxygen Cleaned Grounded Ball and Stem MPTFE Seats and Graphite Packing Cleaned For Industrial Gases Drilled and Tapped Purge Ports with Plugs 4" Extended Bonnet 316 SS Spiral Wound Gaskets w/PTFE Filler 316 SS Spiral Wound Gaskets w/Graphite Filler Live Loaded 87A/88A Series (Lever) Multi-Seal (Super TFE) 87A/88A Series For Pressure/Temperature Ratings, Refer to Page M-9, Graph No. 6 NUMBER SIZE 87A-707-01A 1-1/2" 87A-708-01 2" Back A 1.25 1.50 B 7.50 8.50 C 4.69 5.19 D 3.62 4.62 E 6.03 6.65 F 0.47 0.72 G 1.62 2.41 H 2.15 3.09 I 1.392 1.949 COPYRIGHT ©2003 CONBRACO IND., INC. – PRINTED IN U.S.A. J 0.696 0.974 K 0.500 0.625 L M 0.287 1/4-20 0.412 5/16-18 N 1.50 2.00 Prev. Page | Next WT. 15.7 24.0 D-9 87A-700 Series Stainless Steel ANSI Class 300 Flanged Std. Port Ball Valve 2-1/2" through 3" STANDARDS COMPLIANCE STANDARD FEATURES Refer to page D-A Refer to page D-A MATERIALS OF CONSTRUCTION OPTIONS AVAILABLE: Description 1. Body 2. Retainer 3. Ball 4. Stem 5. Packing Gland 6. Stem Seals 7. Seats 8. Gland Screws 9. Gland Plate 10. Stem Nut 11. Lever 12. Stem Bearing 13. Stop 14. Stop Screw 15. Lock Plate 16. Body Seal 17. Grounding Spring 18. Body Joint Stud 19. Body Joint Nut 20. Lockwasher (SUFFIX) -01-14-21-24-35-38-49-57-60-65-67-69-70-73-74-76-80-MG-MH- Material ASTM A351 CF8M ASTM A351 CF8M ASTM A276 Type 316 or A351 CF8M ASTM A276 Type 316 ASTM A276 Type 316 PTFE RPTFE ASTM A193 B8 Class 1 316 SS 18-8 SS 316 with Vinyl Grip RPTFE ASTM A276 Type 316 316 SS 302 or 304 SS RPTFE SS ASTM A193 Grade B8M ASTM A194 Grade 8 302 or 304 SS -MJ-MK- OPTION Standard Side Vented Ball (Uni-Directional) UHMWPE Seats Fire Safe (Graphite Packing and Seal) PTFE Seats and Seals PEEK Seats and Graphite Packing Assembled Dry Oxygen Cleaned Grounded Ball and Stem MPTFE Seats and Graphite Packing Cleaned For Industrial Gases Drilled and Tapped Purge Ports with Plugs 4" Extended Bonnet 316 SS Spiral Wound Gaskets w/PTFE Filler 316 SS Spiral Wound Gaskets w/Graphite Filler Live Loaded 87A/88A Series (Lever) Multi-Seal (Super TFE) 87A/88A Series Gear Operator with Standard Handwheel Gear Operator with Standard Handwheel & Locking Device Gear Operator with Oversize Handwheel Gear Operator with Oversize Handwheel & Locking Device For Pressure/Temperature Ratings, Refer to Page M-9, Graph No. 6 NUMBER SIZE 87A-709-01 2-1/2" 87A-700-01 3" D-10 Back A 2.00 2.50 B 9.50 11.12 C 4.75 5.56 D 5.61 6.23 E 8.40 8.40 F 0.80 0.80 G 3.31 3.93 H 4.08 4.70 I 1.949 1.949 COPYRIGHT ©2003 CONBRACO IND., INC. – PRINTED IN U.S.A. J 0.974 0.974 K 0.750 0.750 L 0.477 0.477 M 5/16-18 5/16-18 Prev. Page | N 2.50 3.00 Next WT. 39.0 55.0 87A-700 Series Stainless Steel ANSI Class 300 Flanged Std. Port Ball Valve 4" through 8" STANDARDS COMPLIANCE STANDARD FEATURES Refer to page D-A Refer to page D-A MATERIALS OF CONSTRUCTION OPTIONS AVAILABLE: Description 1. Body 2. Retainer 3. Ball 4. Stem 5. Packing Gland 6. Stem Seals 7. Seats 8. Gland Screws 9. Gland Plate 10. Adapter Screw 11. Handle Adapter 12. Stem Bearing 13. Stop 14. Stop Screw 15. Lock Plate 16. Body Seal 17. Grounding Spring 18. Body Joint Stud 19. Body Joint Nut 20. Adapter Screw 21. Pipe Handle (SUFFIX) -01-14-21-24-35-49-57-60-65-67-69-70-73-74-76-80-MG-MH- Material ASTM A351 CF8M ASTM A276 Type 316 ASTM A276 Type 316 or A351 CF8M ASTM A276 Type 316 ASTM A276 Type 316 PTFE RPTFE ASTM A193 B8 Class 1 316 SS 18-8 SS 316 SS RPTFE ASTM A276 Type 316 316 SS 302 or 304 SS RPTFE SS ASTM A193 Grade B8M ASTM A194 Grade 8 18-8 SS Galvanized Steel (not shown) -MJ-MK- OPTION Standard Side Vented Ball (Uni-Directional) UHMWPE Seats Fire Safe (Graphite Packing and Seal) PTFE Seats and Seals Assembled Dry Oxygen Cleaned Grounded Ball and Stem MPTFE Seats and Graphite Packing Cleaned For Industrial Gases Drilled and Tapped Purge Ports with Plugs Extended Bonnet 316 SS Spiral Wound Gaskets w/PTFE Filler 316 SS Spiral Wound Gaskets w/Graphite Filler Live Loaded 87A/88A Series (Lever) Multi-Seal (Super TFE) 87A/88A Series Gear Operator with Standard Handwheel Gear Operator with Standard Handwheel & Locking Device Gear Operator with Oversize Handwheel Gear Operator with Oversize Handwheel & Locking Device For Pressure/Temperature Ratings, Refer to Page M-9, Graph No. 6 NUMBER 87A-70A-01 87A-70C-01 87A-70E-01 SIZE 4" 6" 8" Back A 3.00 4.00 6.00 B 12.00 15.88 19.75 C 5.68 7.38 9.00 D 8.80 9.99 13.73 E 3.88 5.13 7.00 F 0.50 0.50 1.00 G 4.75 5.94 7.75 H 5.95 7.13 9.48 I 2.840 2.840 4.596 COPYRIGHT ©2003 CONBRACO IND., INC. – PRINTED IN U.S.A. J 1.420 1.420 2.298 K 1.250 1.250 2.000 L 0.725 0.725 1.375 M 3/8-16 3/8-16 3/4-10 N 4.00 6.00 8.00 WT. 95.0 187.0 400.0 Prev. Page | Next D-11 87A-700 Series Stainless Steel ANSI Class 300 Flanged Standard Port Ball Valve - 10" STANDARDS COMPLIANCE STANDARD FEATURES Refer to page D-A Refer to page D-A MATERIALS OF CONSTRUCTION OPTIONS AVAILABLE: Description 1. Body 2. Retainer 3. Ball 4. Stem 5. Packing Gland 6. Stem Seals 7. Seats 8. Gland Screws 9. Gland Plate 10. Stem Bearing 11. Body Seal 12. Body Joint Stud 13. Body Joint Nut (SUFFIX) -01-14-21-24-35-49-57-60-65-69-70-76-77-80-MG-MH- Material ASTM A351 CF8M ASTM A351 CF8M ASTM A276 Type 316 or A351 CF8M ASTM A276 Type 316 ASTM A276 Type 316 PTFE RPTFE ASTM A193 B8 Class 1 316 SS RPTFE RPTFE ASTM A193 Grade B8M ASTM A194 Grade 8 -MJ-MK- OPTION Standard (Less Gear Operator) Side Vented Ball (See Page J2) UHMWPE Seats Fire Safe (Graphite Packing and Seal) PTFE Seats and Seals Assembled Dry Oxygen Cleaned (Stainless Steel Valves Only) Grounded Ball and Stem MPTFE Seats and Graphite Packing Drilled and Tapped Purge Ports with Plugs Extended Bonnet Live Loaded 87A/88A Series (Lever) Live Loaded 87A/88A Series (Gear & Actuated) Multi-Seal (Super TFE) 87A/88A Series Gear Operator with Standard Handwheel Gear Operator with Standard Handwheel & Locking Device Gear Operator with Oversize Handwheel Gear Operator with Oversize Handwheel & Locking Device For Pressure/Temperature Ratings, Refer to Page M-9, Graph No. 6 NUMBER 87A-70G-01 D-12 SIZE 10" Back A 8.00 B 22.38 C 10.69 D 12.96 E 9.56 F 1.00 G 10.22 H 4.596 I 2.298 COPYRIGHT ©2003 CONBRACO IND., INC. – PRINTED IN U.S.A. J 2.000 K 1.375 L 3/4-10 M 10.00 Prev. Page | Next 87A-900 Series Stainless Steel ANSI Class 300 Flanged Full Port Ball Valve 1/2" through 1" STANDARDS COMPLIANCE STANDARD FEATURES Refer to page D-A Refer to page D-A MATERIALS OF CONSTRUCTION OPTIONS AVAILABLE: Description 1. Body 2. Retainer 3. Ball 4. Stem 5. Packing Gland 6. Stem Seals 7. Seats 8. Gland Screws 9. Gland Plate 10. Stem Nut 11. Lever 12. Stem Bearing 13. Stop 14. Stop Screw 15. Lock Plate 16. Body Seal 17. Lockwasher 18. Grounding Spring (SUFFIX) -01-14-15-21-24-35-38-49-57-60-65-67-69-70-73-74-76-80- Material ASTM A351 CF8M ASTM A276 Type 316 ASTM A276 Type 316 ASTM A276 Type 316 ASTM A276 Type 316 PTFE RPTFE ASTM A193 B8 Class 1 302 or 304 SS 316 SS 302 or 304 with Vinyl Grip RPTFE ASTM A276 Type 316 18-8 SS 302 or 304 SS RPTFE 302 or 304 SS SS OPTION Standard Side Vented Ball (Uni-Directional) Wheel Handle, Steel UHMWPE Seats Fire Safe (Graphite Packing and Seal) PTFE Seats and Seals PEEK Seats and Graphite Packing Assembled Dry Oxygen Cleaned Grounded Ball and Stem MPTFE Seats and Graphite Packing Cleaned For Industrial Gases Drilled and Tapped Purge Port with Plugs 4" Extended Bonnet 316 SS Spiral Wound Gaskets w/PTFE Filler 316 SS Spiral Wound Gaskets w/Graphite Filler Live Loaded 87A/88A Series (Lever) Multi-Seal (Super TFE) 87A/88A Series For Pressure/Temperature Ratings, Refer to Page M-9, Graph No. 6 NUMBER 87A-903-01 87A-904-01 87A-905-01 SIZE 1/2" 3/4" 1 Back A 0.50 0.75 B 5.50 6.00 C 3.31 3.56 D 3.31 3.89 E 5.14 5.56 F 0.27 0.38 G 1.09 1.65 H 1.68 2.34 I 1.00 1.392 COPYRIGHT ©2003 CONBRACO IND., INC. – PRINTED IN U.S.A. J 0.500 0.696 K 0.375 0.500 L 0.245 0.287 M 1/4-20 1/4-20 Prev. Page | WT. 6.0 9.0 Next D-13 87A-900 Series Stainless Steel ANSI Class 300 Flanged Full Port Ball Valve 1-1/2" through 2-1/2" STANDARDS COMPLIANCE STANDARD FEATURES Refer to page D-A Refer to page D-A MATERIALS OF CONSTRUCTION OPTIONS AVAILABLE: Description 1. Body 2. Retainer 3. Ball 4. Stem 5. Packing Gland 6. Stem Seals 7. Seats 8. Gland Screws 9. Gland Plate 10. Stem Nut 11. Lever 12. Stem Bearing 13. Stop 14. Stop Screw 15. Lock Plate 16. Body Seal 17. Grounding Spring 18. Body Joint Stud 19. Body Joint Nut 20. Lockwasher (SUFFIX) -01-14-21-24-35-38-49-57-60-65-67-69-70-73-74-76-80-MG-MH- Material ASTM A351 CF8M ASTM A351 CF8M ASTM A276 Type 316 or A351 CF8M ASTM A276 Type 316 ASTM A276 Type 316 PTFE RPTFE ASTM A193 B8 Class 1 316 SS 18-8 SS 316 SS RPTFE ASTM A276 Type 316 316 SS 302 or 304 SS RPTFE SS ASTM A193 Grade B8M ASTM A194 Grade 8 302 or 304 SS -MJ-MK- OPTION Standard Side Vented Ball (Uni-Directional) UHMWPE Seats Fire Safe (Graphite Packing and Seal) PTFE Seats and Seals PEEK Seats and Graphite Packing (3" Only) Assembled Dry Oxygen Cleaned Grounded Ball and Stem MPTFE Seats and Graphite Packing Cleaned For Industrial Gases Drilled and Tapped Purge Ports with Plugs 4" Extended Bonnet 316 SS Spiral Wound Gaskets w/PTFE Filler 316 SS Spiral Wound Gaskets w/Graphite Filler Live Loaded 87A/88A Series (Lever) Multi-Seal (Super TFE) 87A/88A Series Gear Operator with Standard Handwheel Gear Operator with Standard Handwheel & Locking Device Gear Operator with Oversize Handwheel Gear Operator with Oversize Handwheel & Locking Device For Pressure/Temperature Ratings, Refer to Page M-9, Graph No. 6 NUMBER SIZE 87A-907-01 1-1/2" 87A-908-01 2" 87A-909-01 2-1/2" D-14 Back A 1.50 2.00 2.50 B 7.50 8.50 9.50 C 3.50 4.00 4.44 D 4.62 5.61 6.23 E 6.65 8.40 8.40 F 0.72 0.80 0.80 G 2.41 3.31 3.93 H 3.09 4.08 4.70 I 1.949 1.949 1.949 COPYRIGHT ©2003 CONBRACO IND., INC. – PRINTED IN U.S.A. J 0.974 0.974 0.974 K 0.625 0.750 0.750 L 0.412 0.477 0.477 M 5/16-18 5/16-18 5/16-18 Prev. Page | WT. 21.0 37.0 57.0 Next 87A-900 Series Stainless Steel ANSI Class 300 Flanged Full Port Ball Valve 3" through 6" STANDARDS COMPLIANCE STANDARD FEATURES Refer to page D-A Refer to page D-A MATERIALS OF CONSTRUCTION OPTIONS AVAILABLE: Description 1. Body 2. Retainer 3. Ball 4. Stem 5. Packing Gland 6. Stem Seals 7. Seats 8. Gland Screws 9. Gland Plate 10. Adapter Screw 11. Handle Adapter 12. Stem Bearing 13. Stop 14. Stop Screw 15. Lock Plate 16. Body Seal 17. Grounding Spring 18. Body Joint Stud 19. Body Joint Nut 20. Pipe Handle (SUFFIX) -01-14-21-24-35-38-49-57-60-65-67-69-70-73-74-76-80-MG-MH- Material ASTM A351 CF8M ASTM A351 CF8M ASTM A276 Type 316 or A351 CF8M ASTM A276 Type 316 ASTM A276 Type 316 PTFE RPTFE ASTM A193 B8 Class 1 316 SS 18-8 SS 316 SS RPTFE ASTM A276 Type 316 316 SS 302 or 304 SS RPTFE SS ASTM A193 Grade B8M ASTM A194 Grade 8 Galvanized Steel (not shown) -MJ-MK- OPTION Standard Side Vented Ball (Uni-Directional) UHMWPE Seats Fire Safe (Graphite Packing and Seal) PTFE Seats and Seals PEEK Seats and Graphite Packing (3" Only) Assembled Dry Oxygen Cleaned (SS Valves Only) Grounded Ball and Stem MPTFE Seats and Graphite Packing Cleaned For Industrial Gases Drilled and Tapped Purge Port with Plugs Extended Bonnet 316 SS Spiral Wound Gaskets w/PTFE Filler 316 SS Spiral Wound Gaskets w/Graphite Filler Live Loaded 87A/88A Series (Lever) Multi-Seal (Super TFE) 87A/88A Series Gear Operator with Standard Handwheel Gear Operator with Standard Handwheel & Locking Device Gear Operator with Oversize Handwheel Gear Operator with Oversize Handwheel & Locking Device For Pressure/Temperature Ratings, Refer to Page M-9, Graph No. 6 NUMBER SIZE 87A-900-01 3" 87A-90A-01 4" 87A-90C-01 6" Back A 3.00 4.00 6.00 B 11.12 12.00 15.88 C 5.24 5.44 6.82 D 8.80 9.99 13.73 E 3.88 5.13 7.00 F 0.50 0.50 1.00 G 4.75 5.94 7.75 H 5.95 7.13 9.48 I 2.840 2.840 4.596 COPYRIGHT ©2003 CONBRACO IND., INC. – PRINTED IN U.S.A. J 1.420 1.420 2.298 K 1.250 1.250 2.000 L 0.725 0.725 1.375 M 3/8-16 3/8-16 3/4-10 Prev. Page | WT. 78.0 133.0 329.0 Next D-15 87A-900 Series Stainless Steel ANSI Class 300 Flanged Full Port Ball Valve 8" through 12" STANDARDS COMPLIANCE STANDARD FEATURES Refer to page D-A Refer to page D-A MATERIALS OF CONSTRUCTION OPTIONS AVAILABLE: Description 1. Body 2. Retainer 3. Ball 4. Stem 5. Packing Gland 6. Stem Seals 7. Seats 8. Gland Screws 9. Gland Plate 10. Stem Bearing 11. Body Seal 12. Body Joint Stud 13. Body Joint Nut (SUFFIX) -01-14-21-24-35-49-57-60-65-69-70-76-80-MG-MH- Material ASTM A351 CF8M ASTM A351 CF8M ASTM A276 Type 316 or A351 CF8M ASTM A276 Type 316 ASTM A276 Type 316 PTFE RPTFE ASTM A193 B8 Class 1 316 SS RPTFE RPTFE ASTM A193 Grade B8M ASTM A194 Grade 8 -MJ-MK- OPTION Standard Side Vented Ball (Uni-Directional) UHMWPE Seats Fire Safe (Graphite Packing and Seal) PTFE Seats and Seals Assembled Dry Oxygen Cleaned Grounded Ball and Stem MPTFE Seats and Graphite Packing Drilled and Tapped Purge Ports with Plugs Extended Bonnet (8" Only) Live Loaded 87A/88A Series (Lever) Multi-Seal (Super TFE) 87A/88A Series Gear Operator with Standard Handwheel Gear Operator with Standard Handwheel & Locking Device Gear Operator with Oversize Handwheel Gear Operator with Oversize Handwheel & Locking Device For Pressure/Temperature Ratings, Refer to Page M-9, Graph No. 6 NUMBER SIZE 87A-90E-01 8" 87A-90G-01 10" 87A-90H-01 12" D-16 Back A 8.00 10.00 12.00 B 19.75 22.38 25.50 C 9.38 10.95 12.84 D 12.96 17.20 19.31 E 9.56 11.33 13.40 F 1.00 2.25 2.25 G 10.22 12.80 14.92 COPYRIGHT ©2003 CONBRACO IND., INC. – PRINTED IN U.S.A. Prev. Page | Next 87B-100 Series Stainless Steel ANSI Class 150 Flanged Std. Port Ball Valve - 3" STANDARDS COMPLIANCE STANDARD FEATURES Refer to page D-A Refer to page D-A MATERIALS OF CONSTRUCTION OPTIONS AVAILABLE: Description 1. Body 2. Retainer 3. Ball 4. Stem 5. Packing Gland 6. Stem Seals 7. Seats 8. Gland Screws 9. Gland Plate 10. Stem Nut 11. Lever 12. Stem Bearing 13. Stop 14. Stop Screw 15. Lock Plate 16. Body Seal 17. Grounding Spring 18. Lockwasher Material ASTM A351 CF8M ASTM A276 Type 316 ASTM A276 Type 316 or A351 CF8M ASTM A276 Type 316 ASTM A276 Type 316 PTFE RPTFE ASTM A193 B8 Class 1 316 SS 18-8 SS 316 SS with Vinyl Grip RPTFE ASTM A276 Type 316 316 SS 302 or 304 SS RPTFE SS 302 or 304 SS (SUFFIX) -14-21-24-35-38-49-57-60-65-69-70-76-80-MG-MH-MJ-MK- OPTION Side Vented Ball (Uni-Directional) UHMWPE Seats Fire Safe (Graphite Packing and Seal) PTFE Seats and Seals PEEK Seats and Graphite Packing (3" Only) Assembled Dry Oxygen Cleaned Grounded Ball and Stem MPTFE Seats and Graphite Packing Drilled and Tapped Purge Ports with Plugs 4" Extended Bonnet Live Loaded 87A/88A Series (Lever) Multi-Seal (Super TFE) 87A/88A Series Gear Operator with Standard Handwheel Gear Operator with Standard Handwheel & Locking Device Gear Operator with Oversize Handwheel Gear Operator with Oversize Handwheel & Locking Device For Pressure/Temperature Ratings, Refer to Page M-7, Graph No. 2 Back COPYRIGHT ©2003 CONBRACO IND., INC. – PRINTED IN U.S.A. Prev. Page | Next D-17 87B-100 Series Stainless Steel ANSI Class 150 Flanged Std. Port Ball Valve 4" – 10" Short Pattern STANDARDS COMPLIANCE STANDARD FEATURES Refer to page D-A Refer to page D-A MATERIALS OF CONSTRUCTION OPTIONS AVAILABLE: Description 1. Body 2. Retainer 3. Ball 4. Stem 5. Packing Gland 6. Stem Seals 7. Seats 8. Gland Screws 9. Gland Plate 10. Adapter Screw 11. Handle Adapter 12. Stem Bearing 13. Stop 14. Stop Screw 15. Lock Plate 16. Body Seal 17. Lockwasher 18. Grounding Spring 19. Adapter Screw (SUFFIX) -14-21-24-35-38-49-57-60-65-69-70-80-MG-MH- Material ASTM A351 CF8M ASTM A276 Type 316 ASTM A276 Type 316 or A351 CF8M ASTM A276 Type 316 ASTM A276 Type 316 PTFE RPTFE ASTM A193 B8 Class 1 316 Stainless Steel 18-8 Stainless Steel 316 Stainless Steel RPTFE ASTM A276 Type 316 316 Stainless Steel 302 or 304 Stainless Steel RPTFE 302 or 304 Stainless Steel Stainless Steel 18-8 Stainless Steel -MJ-MK- OPTION Side Vented Ball (Uni-Directional) UHMWPE Seats Fire Safe (Graphite Packing and Seal) PTFE Seats and Seals PEEK Seats and Graphite Packing Assembled Dry Oxygen Cleaned (Stainless Steel Valves Only) Grounded Ball and Stem MPTFE Seats and Graphite Packing Drilled and Tapped Purge Ports with Plugs Extended Bonnet Multi-Seal (Super TFE) Gear Operator with Standard Handwheel Gear Operator with Standard Handwheel & Locking Device Gear Operator with Oversize Handwheel Gear Operator with Oversize Handwheel & Locking Device For Pressure/Temperature Ratings, Refer to Page M-7, Graph No. 2 NUMBER 87B-10A-01 87B-10C-01 87B-10E-01 87B-10G-01 D-18 Back SIZE 4" 6" 8" 10" A 3.00 4.00 6.00 8.00 B 9.00 10.50 11.50 13.00 C 4.18 5.25 5.75 6.50 D 8.80 9.90 13.61 15.49 E 0.50 0.50 1.00 1.00 F 4.75 5.94 7.63 9.50 G 5.95 7.13 9.36 11.23 H 2.840 2.840 4.596 4.596 I 1.420 1.420 2.298 2.298 COPYRIGHT ©2003 CONBRACO IND., INC. – PRINTED IN U.S.A. J 1.250 1.250 2.000 2.000 K 0.725 0.725 1.375 1.375 L 3/8-16 3/8-16 3/4-10 3/4-10 M 4.00 6.00 8.00 10.0 Prev. Page | WT. 72 Next 210 88A-100 Series Carbon Steel ANSI Class 150 Flanged Std. Port Ball Valve 1-1/2" through 2" STANDARDS COMPLIANCE STANDARD FEATURES Refer to page D-A Refer to page D-A MATERIALS OF CONSTRUCTION VARIATIONS AVAILABLE: Description 1. Body 2. Retainer 3. Ball 4. Stem 5. Packing Gland 6. Stem Seals 7. Seats 8. Gland Screws 9. Gland Plate 10. Stem Nut 11. Lever 12. Stem Bearing 13. Stop 14. Stop Screw 15. Lock Plate 16. Body Seal 17. Lockwasher 18. Grounding Spring 88A-140 Series (316 SS Ball & Stem) 88A-130 Series (Ni-Cu Ball & Stem) Material ASTM A216 WCB ASTM A108 Type 1215 ASTM A108 Type 1215 Chrome Plated ASTM A108 Type 1215 ASTM A108 Type 1215 PTFE RPTFE ASTM A193 B7 302 or 304 SS 316 SS ASTM A366 Steel with Vinyl Grip RPTFE ASTM A108 Type 1215 SAE J429 Grade 2 ASTM A366 Steel RPTFE 302 or 304 SS SS OPTIONS AVAILABLE: (SUFFIX) -01-10-14-15-21-24-35-38-49-60-65-67-69-70-73-74-76-80- OPTION Standard SS Lever and Nut Side Vented Ball (Uni-Directional) Wheel Handle, Steel UHMWPE Seats Fire Safe (Graphite Packing and Seal) PTFE Seats and Seals PEEK Seats and Graphite Packing Assembled Dry Grounded Ball and Stem MPTFE Seats and Graphite Packing Cleaned For Industrial Gases Drilled and Tapped Purge Port with Plug 4" Extended Bonnet 316 SS Spiral Wound Gaskets w/PTFE Filler 316 SS Spiral Wound Gaskets w/Graphite Filler Live Loaded 87A/88A Series (Lever) Multi-Seal (Super TFE) 87A/88A Series For Pressure/Temperature Ratings, Refer to Page M-7, Graph No. 1 NUMBER SIZE 88A-107-01A 1-1/2" 88A-108-01 2" Back A 1.25 1.50 B 6.50 7.00 C 3.69 3.69 D 3.62 4.62 E 6.03 6.65 F 0.47 0.72 G 1.62 2.41 H 2.15 3.09 I 1.392 1.949 COPYRIGHT ©2003 CONBRACO IND., INC. – PRINTED IN U.S.A. J 0.696 0.974 K 0.500 0.625 L 0.287 0.412 M 1/4-20 5/16-18 Prev. Page | N 1.50 2.00 Next WT. 9.0 18.0 D-19 88A-100 Series Carbon Steel ANSI Class 150 Flanged Std. Port Ball Valve 2-1/2" through 3" STANDARDS COMPLIANCE STANDARD FEATURES Refer to page D-A Refer to page D-A MATERIALS OF CONSTRUCTION VARIATIONS AVAILABLE: Description 1. Body 2. Retainer 3. Ball 88A-140 Series (316 SS Ball & Stem) 88A-130 Series (Ni-Cu Ball & Stem) Material ASTM A216 WCB ASTM A216 WCB ASTM A216 WCB or A216 WCB Chrome Plated ASTM A108 Type 1215 ASTM A108 Type 1215 PTFE RPTFE ASTM A193 B7 302 or 304 SS ASTM A194 Grade 8 ASTM A366 Steel with Vinyl Grip RPTFE ASTM A108 Type 1215 SAE J429 Grade 2 ASTM A366 Steel RPTFE SS ASTM A193 Grade B7 ASTM A194 Grade 2H 302 or 304 SS 4. Stem 5. Packing Gland 6. Stem Seals 7. Seats 8. Gland Screws 9. Gland Plate 10. Stem Nut 11. Lever 12. Stem Bearing 13. Stop 14. Stop Screw 15. Lock Plate 16. Body Seal 17. Grounding Spring 18. Body Joint Stud 19. Body Joint Nut 20. Lockwasher OPTIONS AVAILABLE: (SUFFIX) -01-10-14-21-24-35-38-49-59-60-65-67-69-70-73-74-76-80-MG-MH-MJ-MK- OPTION Standard SS Lever and Nut Side Vented Ball (Uni-Directional) UHMWPE Seats Fire Safe (Graphite Packing and Seal) PTFE Seats and Seals PEEK Seats and Graphite Packing Assembled Dry SS External Trim Grounded Ball and Stem MPTFE Seats and Graphite Packing Cleaned For Industrial Gases Drilled and Tapped Purge Port with Plugs 4" Extended Bonnet 316 SS Spiral Wound Gaskets w/PTFE Filler 316 SS Spiral Wound Gaskets w/Graphite Filler Live Loaded 87A/88A Series (Lever) Multi-Seal (Super TFE) 87A/88A Series Gear Operator with Standard Handwheel Gear Operator with Standard Handwheel & Locking Device Gear Operator with Oversize Handwheel Gear Operator with Oversize Handwheel & Locking Device For Pressure/Temperature Ratings, Refer to Page M-7, Graph No. 1 NUMBER SIZE 88A-109-01 2-1/2" 88A-100-01 3" D-20 Back A 2.00 2.50 B 7.50 8.00 C 3.50 3.51 D 5.61 6.23 E 8.40 8.40 F 0.80 0.80 G 3.31 3.93 H 4.08 4.70 I 1.949 1.949 COPYRIGHT ©2003 CONBRACO IND., INC. – PRINTED IN U.S.A. J 0.974 0.974 K 0.750 0.750 L 0.477 0.477 M 5/16-18 5/16-18 Prev. Page | N 2.50 3.00 Next WT. 27.0 34.0 88A-100 Series Carbon Steel ANSI Class 150 Flanged Std. Port Ball Valve 4" through 8" STANDARDS COMPLIANCE STANDARD FEATURES Refer to page D-A Refer to page D-A MATERIALS OF CONSTRUCTION VARIATIONS AVAILABLE: Description 1. Body 2. Retainer 3. Ball 88A-140 Series (316 SS Ball & Stem) 88A-130 Series (Ni-Cu Ball & Stem) Material ASTM A216 WCB ASTM A216 WCB ASTM A216 WCB or A216 WCB Chrome Plated ASTM A108 Type 1215 ASTM A108 Type 1215 PTFE RPTFE ASTM A193 B7 316 SS 316 SS ASTM A366 Steel with Vinyl Grip RPTFE ASTM A108 Type 1215 SAE J429 Grade 2 ASTM A366 Steel RPTFE SS ASTM A193 Grade B7 ASTM A194 Grade 2H 18-8 SS Galvanized Steel (not shown) 4. Stem 5. Packing Gland 6. Stem Seals 7. Seats 8. Gland Screws 9. Gland Plate 10. Adapter Screw 11. Handle Adapter 12. Stem Bearing 13. Stop 14. Stop Screw 15. Lock Plate 16. Body Seal 17. Grounding Spring 18. Body Joint Stud 19. Body Joint Nut 20. Adapter Screw 21. Pipe Handle OPTIONS AVAILABLE: (SUFFIX) -01-14-21-24-35-49-57-59-60-65-67-69-70-73-74-76-80-MG-MH-MJ-MK- OPTION Standard Side Vented Ball (Uni-Directional) UHMWPE Seats Fire Safe (Graphite Packing and Seal) PTFE Seats and Seals Assembled Dry Oxygen Cleaned (SS Valves Only) SS External Trim Grounded Ball and Stem MPTFE Seats and Graphite Packing Cleaned For Industrial Gases Drilled and Tapped Purge Ports with Plugs Extended Bonnet 316 SS Spiral Wound Gaskets w/PTFE Filler 316 SS Spiral Wound Gaskets w/Graphite Filler Live Loaded 87A/88A Series (Lever) Multi-Seal (Super TFE) 87A/88A Series Gear Operator with Standard Handwheel Gear Operator with Standard Handwheel & Locking Device Gear Operator with Oversize Handwheel Gear Operator with Oversize Handwheel & Locking Device For Pressure/Temperature Ratings, Refer to Page M-7, Graph No. 1 NUMBER SIZE 88A-10A-01 4" 88A-10C-01 6" 88A-10E-01 8" Back A 3.00 4.00 6.00 B 9.00 10.50 18.00 C 4.18 4.69 9.00 D 8.80 9.99 13.73 E 3.88 5.13 7.00 F 0.50 0.50 1.00 G 4.75 5.94 7.75 H 5.95 7.13 9.48 I 2.840 2.840 4.596 COPYRIGHT ©2003 CONBRACO IND., INC. – PRINTED IN U.S.A. J 1.420 1.420 2.298 K 1.250 1.250 2.000 L 0.725 0.725 1.375 M 3/8-16 3/8-16 3/4-10 Prev. Page | N WT. 4.00 73.0 6.00 117.0 8.00 310.0 Next D-21 88A-100 Series Carbon Steel ANSI Class 150 Flanged Std. Port Ball Valve - 10" STANDARDS COMPLIANCE STANDARD FEATURES Refer to page D-A Refer to page D-A MATERIALS OF CONSTRUCTION VARIATIONS AVAILABLE: Description 1. Body 2. Retainer 3. Ball 88A-130 Series (Ni-Cu Ball & Stem) 88A-140 Series (316 SS Ball & Stem) Material ASTM A216 WCB ASTM A216 WCB ASTM A108 Type 1215 or A216 WCB Chrome Plated ASTM A108 Type 1215 ASTM A108 Type 1215 PTFE RPTFE ASTM A193 B7 316 SS RPTFE RPTFE ASTM A193 Grade B7 ASTM A194 Grade 2H 4. Stem 5. Packing Gland 6. Stem Seals 7. Seats 8. Gland Screws 9. Gland Plate 10. Stem Bearing 11. Body Seal 12. Body Joint Stud 13. Body Joint Nut OPTIONS AVAILABLE: (SUFFIX) -01-14-21-24-35-49-57-60-65-67-69-70-76-80-MG-MH-MJ-MK- OPTION Standard Side Vented Ball (Uni-Directional) UHMWPE Seats Fire Safe (Graphite Packing and Seal) PTFE Seats and Seals Assembled Dry Oxygen Cleaned Grounded Ball and Stem MPTFE Seats and Graphite Packing Cleaned For Industrial Gases Drilled and Tapped Purge Port with Plugs Extended Bonnet Live Loaded 87A/88A Series (Lever) Multi-Seal (Super TFE) 87A/88A Series Gear Operator with Standard Handwheel Gear Operator with Standard Handwheel & Locking Device Gear Operator with Oversize Handwheel Gear Operator with Oversize Handwheel & Locking Device For Pressure/Temperature Ratings, Refer to Page M-7, Graph No. 1 NUMBER SIZE 88A-10G-01 10" D-22 Back A 8.00 B 21.00 C 10.37 D 12.96 E 9.18 F 1.00 G 10.22 H 4.596 I 2.298 COPYRIGHT ©2003 CONBRACO IND., INC. – PRINTED IN U.S.A. J 2.000 K 1.375 L 3/4-10 M 10.00 Prev. Page | Next 88A-200 Series Carbon Steel ANSI Class 150 Flanged Full Port Ball Valve 1/2" through 1" STANDARDS COMPLIANCE STANDARD FEATURES Refer to page D-A Refer to page D-A MATERIALS OF CONSTRUCTION VARIATIONS AVAILABLE: Description 1. Body 2. Retainer 3. Ball 4. Stem 5. Packing Gland 6. Stem Seals 7. Seats 8. Gland Screws 9. Gland Plate 10. Stem Nut 11. Lever 12. Stem Bearing 13. Stop 14. Stop Screw 15. Lock Plate 16. Body Seal 17. Lockwasher 18. Grounding Spring 88A-240 Series (316 SS Ball & Stem) 88A-230 Series (Ni-Cu Ball & Stem) Material ASTM A216 WCB ASTM A108 Type 1215 ASTM A108 Type 1215 Chrome Plated ASTM A108 Type 1215 ASTM A108 Type 1215 PTFE RPTFE ASTM A193 B7 302 or 304 SS 316 SS ASTM A366 Steel with Vinyl Grip RPTFE ASTM A108 Type 1215 SAE J429 Grade 2 ASTM A366 Steel RPTFE 302 or 304 SS SS OPTIONS AVAILABLE: (SUFFIX) -01-10-14-15-21-24-35-38-49-60-65-67-69-70-73-74-76-80- OPTION Standard SS Lever and Nut Side Vented Ball (Uni-Directional) Wheel Handle, Steel UHMWPE Seats Fire Safe (Graphite Packing and Seal) PTFE Seats and Seals PEEK Seats and Graphite Packing Assembled Dry Grounded Ball and Stem MPTFE Seats and Graphite Packing Cleaned For Industrial Gases Drilled and Tapped Purge Port with Plug 4" Extended Bonnet 316 SS Spiral Wound Gaskets w/PTFE Filler 316 SS Spiral Wound Gaskets w/Graphite Filler Live Loaded 87A/88A Series (Lever) Multi-Seal (Super TFE) 87A/88A Series For Pressure/Temperature Ratings, Refer to Page M-7, Graph No. 1 NUMBER 88A-203-01 88A-204-01 88A-205-01 SIZE 1/2" 3/4" 1" Back A 0.50 0.75 1.00 B 4.25 4.62 5.00 C 2.06 2.18 2.32 D 3.28 3.89 3.62 E 5.14 5.56 6.03 F .30 .39 0.47 G 1.09 1.65 1.62 H 1.38 1.96 2.15 I 1.002 1.392 1.392 COPYRIGHT ©2003 CONBRACO IND., INC. – PRINTED IN U.S.A. J .501 .696 0.696 K .376 .500 0.500 L .245 .287 0.287 M 10-24 1/4-20 1/4-20 Prev. Page | WT. 5.0 6.0 7.0 Next D-23 88A-200 Series Carbon Steel ANSI Class 150 Flanged Full Port Ball Valve 1-1/2" through 2-1/2" STANDARDS COMPLIANCE STANDARD FEATURES Refer to page D-A Refer to page D-A MATERIALS OF CONSTRUCTION VARIATIONS AVAILABLE: Description 1. Body 2. Retainer 3. Ball 4. Stem 5. Packing Gland 6. Stem Seals 7. Seats 8. Gland Screws 9. Gland Plate 10. Stem Nut 11. Lever 12. Stem Bearing 13. Stop 14. Stop Screw 15. Lock Plate 16. Body Seal 17. Grounding Spring 18. Body Joint Stud 19. Body Joint Nut 20. Lockwasher 88A-240 Series (316 SS Ball & Stem) 88A-230 Series (Ni-Cu Ball & Stem) Material ASTM A216 WCB ASTM A216 WCB ASTM A216 WCB or A216 WCB Chrome Plated ASTM A108 Type 1215 ASTM A108 Type 1215 PTFE RPTFE ASTM A193 B7 302 & 304 SS ASTM A194 Grade 8l ASTM A366 Steel with Vinyl Grip RPTFE ASTM A108 Type 1215 SAE J429 Grade 2 ASTM A366 Steel RPTFE SS ASTM A193 Grade B7 ASTM A194 Grade 2H 302 or 304 SS OPTIONS AVAILABLE: (SUFFIX) -01-10-14-15-21-24-35-38-49-59-60-65-67-69-70-73-74-76-80-MG-MH-MJ-MK- OPTION Standard SS Lever and Nut Side Vented Ball (Uni-Directional) Wheel Handle, Steel UHMWPE Seats Fire Safe (Graphite Packing and Seal) PTFE Seats and Seals PEEK Seats and Graphite Packing Assembled Dry SS External Trim Grounded Ball and Stem MPTFE Seats and Graphite Packing Cleaned For Industrial Gases Drilled and Tapped Purge Ports with Plugs 4" Extended Bonnet 316 SS Spiral Wound Gaskets w/PTFE Filler 316 SS Spiral Wound Gaskets w/Graphite Filler Live Loaded 87A/88A Series (Lever) Multi-Seal (Super TFE) 87A/88A Series Gear Operator with Standard Handwheel Gear Operator with Standard Handwheel & Locking Device Gear Operator with Oversize Handwheel Gear Operator with Oversize Handwheel & Locking Device For Pressure/Temperature Ratings, Refer to Page M-7, Graph No. 1 NUMBER SIZE 88A-207-01 1-1/2" 88A-208-01 2" 88A-209-01 2-1/2" D-24 Back A 1.50 2.00 2.50 B 6.50 7.00 7.50 C 3.00 3.04 3.34 D 4.62 5.61 6.23 E 6.65 8.40 8.40 F 0.72 0.80 0.80 G 2.41 3.31 3.93 H 3.09 4.08 4.70 I 1.949 1.949 1.949 COPYRIGHT ©2003 CONBRACO IND., INC. – PRINTED IN U.S.A. J 0.974 0.974 0.974 K 0.625 0.750 0.750 L 0.412 0.477 0.477 M 5/16-18 5/16-18 5/16-18 Prev. Page | WT. 14.0 25.0 30.0 Next 88A-200 Series Carbon Steel ANSI Class 150 Flanged Full Port Ball Valve 3" through 6" STANDARDS COMPLIANCE STANDARD FEATURES Refer to page D-A Refer to page D-A MATERIALS OF CONSTRUCTION VARIATIONS AVAILABLE: Description 1. Body 2. Retainer 3. Ball 88A-240 Series (316 SS Ball & Stem) 88A-230 Series (Ni-Cu Ball & Stem) Material ASTM A216 WCB ASTM A216 WCB ASTM A108 Type 1215 or A216 WCB Chrome Plated ASTM A108 Type 1215 ASTM A108 Type 1215 PTFE RPTFE ASTM A193 B7 316 SS 316 SS ASTM A366 Steel with Vinyl Grip RPTFE ASTM A108 Type 1215 SAE J429 Grade 2 ASTM A366 Steel RPTFE SS ASTM A193 Grade B7 ASTM A194 Grade 2H Galvanized Steel (not shown) 4. Stem 5. Packing Gland 6. Stem Seals 7. Seats 8. Gland Screws 9. Gland Plate 10. Adapter Screw 11. Handle Adapter 12. Stem Bearing 13. Stop 14. Stop Screw 15. Lock Plate 16. Body Seal 17. Grounding Spring 18. Body Joint Stud 19. Body Joint Nut 20. Pipe Handle OPTIONS AVAILABLE: (SUFFIX) -01-14-21-24-35-38-49-59-60-65-67-69-70-73-74-76-80-MG-MH-MJ-MK- OPTION Standard Side Vented Ball (Uni-Directional) UHMWPE Seats Fire Safe (Graphite Packing and Seal) PTFE Seats and Seals PEEK Seats and Graphite Packing Assembled Dry SS External Trim Grounded Ball and Stem MPTFE Seats and Graphite Packing Cleaned For Industrial Gases Drilled and Tapped Purge Port with Plug 4" Extended Bonnet 316 SS Spiral Wound Gaskets w/PTFE Filler 316 SS Spiral Wound Gaskets w/Graphite Filler Live Loaded 87A/88A Series (Lever) Multi-Seal (Super TFE) 87A/88A Series Gear Operator with Standard Handwheel Gear Operator with Standard Handwheel & Locking Device Gear Operator with Oversize Handwheel Gear Operator with Oversize Handwheel & Locking Device For Pressure/Temperature Ratings, Refer to Page M-7, Graph No. 1 NUMBER 88A-200-01 88A-20A-01 88A-20C-01 SIZE 3" 4" 6" Back A 3.00 4.00 6.00 B 8.00 9.00 15.50 C 3.68 3.94 7.19 D 8.80 9.99 13.73 E 3.88 5.13 7.00 F 0.50 0.50 1.00 G 4.75 5.94 7.75 H 5.95 7.13 9.48 I 2.840 2.840 4.596 COPYRIGHT ©2003 CONBRACO IND., INC. – PRINTED IN U.S.A. J 1.420 1.420 2.298 K 1.250 1.250 2.000 L 0.725 0.725 1.375 M 3/8-16 3/8-16 3/4-10 Prev. Page | WT. 60.0 91.0 248.0 Next D-25 88A-200 Series Carbon Steel ANSI Class 150 Flanged Full Port Ball Valve 8" through 12" STANDARDS COMPLIANCE STANDARD FEATURES Refer to page D-A Refer to page D-A MATERIALS OF CONSTRUCTION Description 1. Body 2. Retainer 3. Ball VARIATIONS AVAILABLE: 88A-230 Series (Ni-Cu Ball & Stem) 88A-240 Series (316 SS Ball & Stem) Material ASTM C216 WCB ASTM C216 WCB ASTM A108 Type 1215 or A216 WCB Chrome Plated ASTM A108 Type 1215 ASTM A108 Type 1215 PTFE RPTFE ASTM A193 B7 316 SS RPTFE RPTFE ASTM A193 Grade B7 ASTM A194 Grade 2H 4. Stem 5. Packing Gland 6. Stem Seals 7. Seats 8. Gland Screws 9. Gland Plate 10. Stem Bearing 11. Body Seal 12. Body Joint Stud 13. Body Joint Nut OPTIONS AVAILABLE: (SUFFIX) -01-14-21-24-35-49-65-67-69-70-76-80-MG-MH-MJ-MK- OPTION Standard Side Vented Ball (Uni-Directional) UHMWPE Seats Fire Safe (Graphite Packing and Seal) PTFE Seats and Seals Assembled Dry MPTFE Seats and Graphite Packing Cleaned for Industrial Gas - CS Valves Drilled and Tapped Purge Ports with Plugs Extended Bonnet (8" Only) Live Loaded 87A/88A Series (Lever) Multi-Seal (Super TFE) 87A/88A Series Gear Operator with Standard Handwheel Gear Operator with Standard Handwheel & Locking Device Gear Operator with Oversize Handwheel Gear Operator with Oversize Handwheel & Locking Device For Pressure/Temperature Ratings, Refer to Page M-7, Graph No. 1 NUMBER SIZE 88A-20E-01 8" 88A-20G-01 10" 88A-20H-01 12" D-26 Back A 8.00 10.00 12.00 B 18.00 21.00 24.00 C 8.88 10.26 12.09 D 12.96 17.20 19.31 E 9.18 11.33 13.40 F 1.00 2.25 2.25 G 10.22 12.80 14.92 COPYRIGHT ©2003 CONBRACO IND., INC. – PRINTED IN U.S.A. Prev. Page | Next 88A-700 Series Carbon Steel ANSI Class 300 Flanged Std. Port Ball Valve 1-1/2" through 2" STANDARDS COMPLIANCE STANDARD FEATURES Refer to page D-A Refer to page D-A MATERIALS OF CONSTRUCTION VARIATIONS AVAILABLE: Description 1. Body 2. Retainer 3. Ball 4. Stem 5. Packing Gland 6. Stem Seals 7. Seats 8. Gland Screws 9. Gland Plate 10. Stem Nut 11. Lever 12. Stem Bearing 13. Stop 14. Stop Screw 15. Lock Plate 16. Body Seal 17. Lockwasher 18. Grounding Spring 88A-740 Series (316 SS Ball & Stem) 88A-730 Series (Ni-Cu Ball & Stem) Material ASTM A216 WCB ASTM A108 Type 1215 ASTM A108 Type 1215 Chrome Plated ASTM A108 Type 1215 ASTM A108 Type 1215 PTFE RPTFE ASTM A193 B7 302 & 304 SS 316 SS ASTM A366 Steel with Vinyl Grip RPTFE ASTM A108 Type 1215 SAE J429 Grade 2 ASTM A366 Steel RPTFE 302 or 304 SS SS OPTIONS AVAILABLE: (SUFFIX) -01-10-14-15-21-24-35-38-49-60-65-67-69-70-73-74-76-80- OPTION Standard SS Lever and Nut Side Vented Ball (Uni-Directional) Wheel Handle, Steel UHMWPE Seats Fire Safe (Graphite Packing and Seal) PTFE Seats and Seals PEEK Seats and Graphite Packing Assembled Dry Grounded Ball and Stem MPTFE Seats and Graphite Packing Cleaned For Industrial Gases Drilled and Tapped Purge Ports with Plugs 4" Extended Bonnet 316 SS Spiral Wound Gaskets w/PTFE Filler 316 SS Spiral Wound Gaskets w/Graphite Filler Live Loaded 87A/88A Series (Lever) Multi-Seal (Super TFE) 87A/88A Series For Pressure/Temperature Ratings, Refer to Page M-9, Graph No. 5 NUMBER SIZE 88A-707-01A 1-1/2" 88A-708-01 2" Back A 1.25 1.50 B 7.50 8.50 C 4.69 5.19 D 3.62 4.62 E 6.03 6.65 F 0.47 0.72 G 1.62 2.41 H 2.15 3.09 I 1.392 1.949 COPYRIGHT ©2003 CONBRACO IND., INC. – PRINTED IN U.S.A. J 0.696 0.974 K 0.500 0.625 L 0.287 0.412 M 1/4-20 5/16-18 Prev. Page | N 1.50 2.00 Next WT. 16.0 24.0 D-27 88A-700 Series Carbon Steel ANSI Class 300 Flanged Std. Port Ball Valve 2-1/2" through 3" STANDARDS COMPLIANCE STANDARD FEATURES Refer to page D-A Refer to page D-A MATERIALS OF CONSTRUCTION VARIATIONS AVAILABLE: Description 1. Body 2. Retainer 3. Ball 88A-740 Series (316 SS Ball & Stem) 88A-730 Series (Ni-Cu Ball & Stem) Material ASTM A216 WCB ASTM A216 WCB ASTM A108 Type 1215 or A216 WCB Chrome Plated ASTM A108 Type 1215 ASTM A108 Type 1215 PTFE RPTFE ASTM A193 B7 302 or 304 SS ASTM A194 Grade 8 ASTM A366 Steel with Vinyl Grip RPTFE ASTM A108 Type 1215 SAE J429 Grade 2 ASTM A366 Steel RPTFE SS ASTM A193 Grade B7 ASTM A194 Grade 2H 302 or 304 SS 4. Stem 5. Packing Gland 6. Stem Seals 7. Seats 8. Gland Screws 9. Gland Plate 10. Stem Nut 11. Lever 12. Stem Bearing 13. Stop 14. Stop Screw 15. Lock Plate 16. Body Seal 17. Grounding Spring 18. Body Joint Stud 19. Body Joint Nut 20. Lockwasher OPTIONS AVAILABLE: (SUFFIX) -01-10-14-15-21-24-35-38-49-59-60-65-67-69-70-73-74-76-80-MG-MH-MJ-MK- OPTION Standard SS Lever and Nut Side Vented Ball (Uni-Directional) Wheel Handle, Steel UHMWPE Seats Fire Safe (Graphite Packing and Seal) PTFE Seats and Seals PEEK Seats and Graphite Packing Assembled Dry SS External Trim Grounded Ball and Stem MPTFE Seats and Graphite Packing Cleaned For Industrial Gases Drilled and Tapped Purge Port with Plug 4" Extended Bonnet 316 SS Spiral Wound Gaskets w/PTFE Filler 316 SS Spiral Wound Gaskets w/Graphite Filler Live Loaded 87A/88A Series (Lever) Multi-Seal (Super TFE) 87A/88A Series Gear Operator with Standard Handwheel Gear Operator with Standard Handwheel & Locking Device Gear Operator with Oversize Handwheel Gear Operator with Oversize Handwheel & Locking Device For Pressure/Temperature Ratings, Refer to Page M-9, Graph No. 5 NUMBER SIZE 88A-709-01 2-1/2" 88A-700-01 3" D-28 Back A 2.00 2.50 B 9.50 11.12 C 4.75 5.56 D 5.61 6.23 E 8.40 8.40 F 0.80 0.80 G 3.31 3.93 H 4.08 4.70 I 1.949 1.949 COPYRIGHT ©2003 CONBRACO IND., INC. – PRINTED IN U.S.A. J 0.974 0.974 K 0.750 0.750 L 0.477 0.477 M 5/16-18 5/16-18 Prev. Page | N 2.50 3.00 Next WT. 39.0 55.0 88A-700 Series Carbon Steel ANSI Class 300 Flanged Std. Port Ball Valve 4" through 8" STANDARDS COMPLIANCE STANDARD FEATURES Refer to page D-A Refer to page D-A MATERIALS OF CONSTRUCTION VARIATIONS AVAILABLE: Description 1. Body 2. Retainer 3. Ball 88A-740 Series (316 SS Ball & Stem) 88A-730 Series (Ni-Cu Ball & Stem) Material ASTM A216 WCB ASTM A216 WCB ASTM A108 Type 1215 or A216 WCB Chrome Plated ASTM A108 Type 1215 ASTM A108 Type 1215 PTFE RPTFE ASTM A193 B7 316 SS 316 SS ASTM A366 Steel with Vinyl Grip RPTFE ASTM A108 Type 1215 SAE J429 Grade 2 ASTM A366 Steel RPTFE SS ASTM A193 Grade B7 ASTM A194 Grade 2H Galvanized Steel (not shown) 4. Stem 5. Packing Gland 6. Stem Seals 7. Seats 8. Gland Screws 9. Gland Plate 10. Adapter Screw 11. Handle Adapter 12. Stem Bearing 13. Stop 14. Stop Screw 15. Lock Plate 16. Body Seal 17. Grounding Spring 18. Body Joint Stud 19. Body Joint Nut 20. Pipe Handle OPTIONS AVAILABLE: (SUFFIX) -01-14-21-24-35-49-59-60-65-67-69-70-73-74-76-80-MG-MH-MJ-MK- OPTION Standard Side Vented Ball (Uni-Directional) UHMWPE Seats Fire Safe (Graphite Packing and Seal) PTFE Seats and Seals Assembled Dry SS External Trim Grounded Ball and Stem MPTFE Seats and Graphite Packing Cleaned For Industrial Gases Drilled and Tapped Purge Ports with Plugs Extended Bonnet 316 SS Spiral Wound Gaskets w/PTFE Filler 316 SS Spiral Wound Gaskets w/Graphite Filler Live Loaded 87A/88A Series (Lever) Multi-Seal (Super TFE) 87A/88A Series Gear Operator with Standard Handwheel Gear Operator with Standard Handwheel & Locking Device Gear Operator with Oversize Handwheel Gear Operator with Oversize Handwheel & Locking Device For Pressure/Temperature Ratings, Refer to Page M-9, Graph No. 5 NUMBER 88A-70A-01 88A-70C-01 88A-70E-01 SIZE 4" 6" 8" Back A 3.00 4.00 6.00 B 12.00 15.88 19.75 C 5.68 7.38 9.00 D 8.80 9.99 13.73 E 3.88 5.13 7.00 F 0.50 0.50 1.00 G 4.75 5.94 7.75 H 5.95 7.13 9.48 I 2.840 2.840 4.596 COPYRIGHT ©2003 CONBRACO IND., INC. – PRINTED IN U.S.A. J 1.420 1.420 2.298 K 1.250 1.250 2.000 L 0.725 0.725 1.375 M 3/8-16 3/8-16 3/4-10 Prev. Page | N WT. 4.00 95.0 6.00 187.0 8.00 400.0 Next D-29 88A-700 Series Carbon Steel ANSI Class 300 Flanged Std. Port Ball Valve - 10" STANDARDS COMPLIANCE STANDARD FEATURES Refer to page D-A Refer to page D-A MATERIALS OF CONSTRUCTION VARIATIONS AVAILABLE: Description 1. Body 2. Retainer 3. Ball 88A-730 Series (Ni-Cu Ball & Stem) 88A-740 Series (316 SS Ball & Stem) Material ASTM A216 WCB ASTM A216 WCB ASTM A108 Type 1215 or A216 WCB Chrome Plated ASTM A108 Type 1215 ASTM A108 Type 1215 PTFE RPTFE ASTM A193 B7 316 SS RPTFE RPTFE ASTM A193 Grade B7 ASTM A194 Grade 2H 4. Stem 5. Packing Gland 6. Stem Seals 7. Seats 8. Gland Screws 9. Gland Plate 10. Stem Bearing 11. Body Seal 12. Body Joint Stud 13. Body Joint Nut OPTIONS AVAILABLE: (SUFFIX) -01-14-21-24-35-49-57-60-65-67-69-70-76-80-MG-MH-MJ-MK- OPTION Standard Side Vented Ball (Uni-Directional) UHMWPE Seats Fire Safe (Graphite Packing and Seal) PTFE Seats and Seals Assembled Dry Oxygen Cleaned Grounded Ball and Stem MPTFE Seats and Graphite Packing Cleaned For Industrial Gases Drilled and Tapped Purge Port with Plugs Extended Bonnet Live Loaded 87A/88A Series (Lever) Multi-Seal (Super TFE) 87A/88A Series Gear Operator with Standard Handwheel Gear Operator with Standard Handwheel & Locking Device Gear Operator with Oversize Handwheel Gear Operator with Oversize Handwheel & Locking Device For Pressure/Temperature Ratings, Refer to Page M-9, Graph No. 5 NUMBER SIZE 88A-70G-01 10" D-30 Back A 8.00 B 22.38 C 10.69 D 12.96 E 9.56 F 1.00 G 10.22 H 4.596 I 2.298 COPYRIGHT ©2003 CONBRACO IND., INC. – PRINTED IN U.S.A. J 2.000 K 1.375 L 3/4-10 M 10.00 Prev. Page | Next 88A-900 Series Carbon Steel ANSI Class 300 Flanged Full Port Ball Valve 1/2" through 1" STANDARDS COMPLIANCE STANDARD FEATURES Refer to page D-A Refer to page D-A MATERIALS OF CONSTRUCTION VARIATIONS AVAILABLE: Description 1. Body 2. Retainer 3. Ball 4. Stem 5. Packing Gland 6. Stem Seals 7. Seats 8. Gland Screws 9. Gland Plate 10. Stem Nut 11. Lever 12. Stem Bearing 13. Stop 14. Stop Screw 15. Lock Plate 16. Body Seal 17. Lockwasher 18. Grounding Spring 88A-940 Series (316 SS Ball & Stem) 88A-930 Series (Ni-Cu Ball & Stem) Material ASTM A216 WCB ASTM A108 Type 1215 ASTM A108 Type 1215 Chrome Plated ASTM A108 Type 1215 ASTM A108 Type 1215 PTFE RPTFE ASTM A193 B7 302 or 304 SS 316 SS ASTM A366 Steel with Vinyl Grip RPTFE ASTM A108 Type 1215 SAE J429 Grade 2 ASTM A366 Steel RPTFE 302 or 304 SS SS OPTIONS AVAILABLE: (SUFFIX) -01-10-14-15-21-24-35-38-49-60-65-67-69-70-73-74-76-80- OPTION Standard SS Lever and Nut Side Vented Ball (Uni-Directional) Wheel Handle, Steel UHMWPE Seats Fire Safe (Graphite Packing and Seal) PTFE Seats and Seals PEEK Seats and Graphite Packing Assembled Dry Grounded Ball and Stem MPTFE Seats and Graphite Packing Cleaned For Industrial Gases Drilled and Tapped Purge Port with Plug 4" Extended Bonnet 316 SS Spiral Wound Gaskets w/PTFE Filler 316 SS Spiral Wound Gaskets w/Graphite Filler Live Loaded 87A/88A Series (Lever) Multi-Seal (Super TFE) 87A/88A Series For Pressure/Temperature Ratings, Refer to Page M-9, Graph No. 5 NUMBER 88A-903-01 88A-904-01 88A-905-01 SIZE 1/2" 3/4" 1" Back A 0.50 0.75 1.00 B 5.50 6.00 6.50 C 3.31 3.56 3.82 D 3.31 3.89 3.62 E 5.14 5.56 6.03 F 0.27 0.38 0.47 G 1.09 1.65 1.62 H 1.68 2.34 2.15 I 1.000 1.392 1.392 COPYRIGHT ©2003 CONBRACO IND., INC. – PRINTED IN U.S.A. J 0.500 0.696 0.696 K 0.375 0.500 0.500 L 0.245 0.287 0.287 M 1/4-20 1/4-20 1/4-20 Prev. Page | WT. 7.0 9.0 10.5 Next D-31 88A-900 Series Carbon Steel ANSI Class 300 Flanged Full Port Ball Valve 1-1/2" through 2-1/2" STANDARDS COMPLIANCE STANDARD FEATURES Refer to page D-A Refer to page D-A MATERIALS OF CONSTRUCTION VARIATIONS AVAILABLE: Description 1. Body 2. Retainer 3. Ball 88A-940 Series (316 SS Ball & Stem) 88A-930 Series (Ni-Cu Ball & Stem) Material ASTM A216 WCB ASTM A216 WCB ASTM A216 WCB or A216 WCB Chrome Plated ASTM A108 Type 1215 ASTM A108 Type 1215 PTFE RPTFE ASTM A193 B7 302 & 304 SS ASTM A194 Grade 8l ASTM A366 Steel with Vinyl Grip RPTFE ASTM A108 Type 1215 SAE J429 Grade 2 ASTM A366 Steel RPTFE SS ASTM A193 Grade B7 ASTM A194 Grade 2H 302 or 304 SS 4. Stem 5. Packing Gland 6. Stem Seals 7. Seats 8. Gland Screws 9. Gland Plate 10. Stem Nut 11. Lever 12. Stem Bearing 13. Stop 14. Stop Screw 15. Lock Plate 16. Body Seal 17. Grounding Spring 18. Body Joint Stud 19. Body Joint Nut 20. Lockwasher OPTIONS AVAILABLE: (SUFFIX) -01-14-15-21-24-35-38-49-59-60-65-67-69-70-73-74-76-80-MG-MH-MJ-MK- OPTION Standard Side Vented Ball (Uni-Directional) Wheel Handle, Steel UHMWPE Seats Fire Safe (Graphite Packing and Seal) PTFE Seats and Seals PEEK Seats and Graphite Packing Assembled Dry SS External Trim Grounded Ball and Stem MPTFE Seats and Graphite Packing Cleaned For Industrial Gases Drilled and Tapped Purge Ports with Plugs 4" Extended Bonnet 316 SS Spiral Wound Gaskets w/PTFE Filler 316 SS Spiral Wound Gaskets w/Graphite Filler Live Loaded 87A/88A Series (Lever) Multi-Seal (Super TFE) 87A/88A Series Gear Operator with Standard Handwheel Gear Operator with Standard Handwheel & Locking Device Gear Operator with Oversize Handwheel Gear Operator with Oversize Handwheel & Locking Device For Pressure/Temperature Ratings, Refer to Page M-9, Graph No. 5 NUMBER SIZE 88A-907-01 1-1/2" 88A-908-01 2" 88A-909-01 2-1/2" D-32 Back A 1.50 2.00 2.50 B 7.50 8.50 9.50 C 3.50 4.00 4.44 D 4.62 5.61 6.23 E 6.65 8.40 8.40 F 0.72 0.80 0.80 G 2.41 3.31 3.93 H 3.09 4.08 4.70 I 1.949 1.949 1.949 COPYRIGHT ©2003 CONBRACO IND., INC. – PRINTED IN U.S.A. J 0.974 0.974 0.974 K 0.625 0.750 0.750 L 0.412 0.477 0.477 M 5/16-18 5/16-18 5/16-18 Prev. Page | WT. 21.0 37.0 57.0 Next 88A-900 Series Carbon Steel ANSI Class 300 Flanged Full Port Ball Valve 3" through 6" STANDARDS COMPLIANCE STANDARD FEATURES Refer to page D-A Refer to page D-A MATERIALS OF CONSTRUCTION VARIATIONS AVAILABLE: Description 1. Body 2. Retainer 3. Ball 88A-940 Series (316 SS Ball & Stem) 88A-930 Series (Ni-Cu Ball & Stem) Material ASTM A216 WCB ASTM A216 WCB ASTM A216 WCB or A216 WCB Chrome Plated ASTM A108 Type 1215 ASTM A108 Type 1215 PTFE RPTFE ASTM A193 B7 316 SS 316 SS ASTM A366 Steel with Vinyl Grip RPTFE ASTM A108 Type 1215 SAE J429 Grade 2 ASTM A366 Steel RPTFE SS ASTM A193 Grade B7 ASTM A194 Grade 2H Galvanized Steel (not shown) 4. Stem 5. Packing Gland 6. Stem Seals 7. Seats 8. Gland Screws 9. Gland Plate 10. Adapter Screw 11. Handle Adapter 12. Stem Bearing 13. Stop 14. Stop Screw 15. Lock Plate 16. Body Seal 17. Grounding Spring 18. Body Joint Stud 19. Body Joint Nut 20. Pipe Handle OPTIONS AVAILABLE: (SUFFIX) -01-14-21-24-35-38-49-59-60-65-67-69-70-73-74-76-80-MG-MH-MJ-MK- OPTION Standard Side Vented Ball (Uni-Directional) UHMWPE Seats Fire Safe (Graphite Packing and Seal) PTFE Seats and Seals PEEK Seats and Graphite Packing Assembled Dry SS External Trim Grounded Ball and Stem MPTFE Seats and Graphite Packing Cleaned For Industrial Gases Drilled and Tapped Purge Ports with Plugs 4" Extended Bonnet 316 SS Spiral Wound Gaskets w/PTFE Filler 316 SS Spiral Wound Gaskets w/Graphite Filler Live Loaded 87A/88A Series (Lever) Multi-Seal (Super TFE) 87A/88A Series Gear Operator with Standard Handwheel Gear Operator with Standard Handwheel & Locking Device Gear Operator with Oversize Handwheel Gear Operator with Oversize Handwheel & Locking Device For Pressure/Temperature Ratings, Refer to Page M-9, Graph No. 5 NUMBER SIZE 88A-900-01 3" 88A-90A-01 4" 88A-90C-01 6" Back A 3.00 4.00 6.00 B 11.12 12.00 15.88 C 5.24 5.44 6.82 D 8.80 9.99 13.73 E 3.88 5.13 7.00 F 0.50 0.50 1.00 G 4.75 5.94 7.75 H 5.95 7.13 9.48 I 2.840 2.840 4.596 COPYRIGHT ©2003 CONBRACO IND., INC. – PRINTED IN U.S.A. J 1.420 1.420 2.296 K 1.250 1.250 2.000 L 0.725 0.725 1.375 M 3/8-16 3/8-16 3/4-10 Prev. Page | WT. 78.0 133.0 329.0 Next D-33 88A-900 Series Carbon Steel ANSI Class 300 Flanged Full Port Ball Valve 8" through 12" STANDARDS COMPLIANCE STANDARD FEATURES Refer to page D-A Refer to page D-A MATERIALS OF CONSTRUCTION Description 1. Body 2. Retainer 3. Ball 4. Stem 5. Packing Gland 6. Stem Seals 7. Seats 8. Gland Screws 9. Gland Plate 10. Stem Bearing 11. Body Seal 12. Body Joint Stud 13. Body Joint Nut VARIATIONS AVAILABLE: 88A-930 Series (Ni-Cu Ball & Stem) 88A-940 Series (316 SS Ball & Stem) Material ASTM A216 WCB ASTM A216 WCB ASTM A108 Type 1215 or A216 WCB ASTM A108 Type 1215 ASTM A108 Type 1215 PTFE RPTFE ASTM A193 B7 316 SS RPTFE RPTFE ASTM A193 Grade B7 ASTM A194 Grade 2H OPTIONS AVAILABLE: (SUFFIX) -01-14-21-24-35-49-60-65-67-69-70-76-80-MG-MH-MJ-MK- OPTION Standard Side Vented Ball (Uni-Directional) UHMWPE Seats Fire Safe (Graphite Packing and Seal) PTFE Seats and Seals Assembled Dry Grounded Ball and Stem MPTFE Seats and Graphite Packing Cleaned for Industrial Gas - CS Valves Drilled and Tapped Purge Ports with Plugs Extended Bonnet (8" Only) Live Loaded 87A/88A Series (Lever) Multi-Seal (Super TFE) 87A/88A Series Gear Operator with Standard Handwheel Gear Operator with Standard Handwheel & Locking Device Gear Operator with Oversize Handwheel Gear Operator with Oversize Handwheel & Locking Device For Pressure/Temperature Ratings, Refer to Page M-9, Graph No. 5 NUMBER SIZE 88A-90E-01 8" 88A-90G-01 10" 88A-90H-01 12" D-34 Back A 8.00 10.00 12.00 B 19.75 22.38 25.50 C 9.38 10.95 12.84 D 12.96 17.20 19.31 E 9.56 11.33 13.40 F 1.00 2.25 2.25 G 10.22 12.80 14.92 COPYRIGHT ©2003 CONBRACO IND., INC. – PRINTED IN U.S.A. Prev. Page | Next 88B-100 Series Carbon Steel ANSI Class 150 Flanged Std. Port Ball Valve - 3" STANDARDS COMPLIANCE STANDARD FEATURES Refer to page D-A Refer to page D-A MATERIALS OF CONSTRUCTION VARIATIONS AVAILABLE: Description 1. Body 2. Retainer 3. Ball 4. Stem 5. Packing Gland 6. Stem Seals 7. Seats 8. Gland Screws 9. Gland Plate 10. Stem Nut 11. Lever 12. Stem Bearing 13. Stop 14. Stop Screw 15. Lock Plate 16. Body Seal 17. Grounding Spring 18. Lockwasher 88B-130 Series (Ni-Cu Ball & Stem) 88B-140 Series (316 SS Ball & Stem) Material ASTM A216-WCB ASTM A108 Type 1215 ASTM A108 Type 1215 Chrome Plated ASTM A108 Type 1215 Chrome Plated ASTM A108 Type 1215 PTFE RPTFE ASTM A193 B7 316 SS 18-8 SS 316 SS with Vinyl Grip RPTFE ASTM A108 Type 1215 SAE J429 Grade 2 ASTM A366 Steel RPTFE SS 302 or 304 SS OPTIONS AVAILABLE: (SUFFIX) -14-21-24-35-38-49-57-60-65-69-70-76-80-MG-MH-MJ-MK- OPTION Side Vented Ball (Uni-Directional) UHMWPE Seats Fire Safe (Graphite Packing and Seal) PTFE Seats and Seals PEEK Seats and Graphite Packing (3" Only) Assembled Dry Oxygen Cleaned Grounded Ball and Stem MPTFE Seats and Graphite Packing Drilled and Tapped Purge Ports with Plugs Extended Bonnet Live Loaded 87A/88A Series (Lever) Multi-Seal (Super TFE) 87A/88A Series Gear Operator with Standard Handwheel Gear Operator with Standard Handwheel & Locking Device Gear Operator with Oversize Handwheel Gear Operator with Oversize Handwheel & Locking Device For Pressure/Temperature Ratings, Refer to Page M-7, Graph No. 1 Back COPYRIGHT ©2003 CONBRACO IND., INC. – PRINTED IN U.S.A. Prev. Page | Next D-35 88B-100 Series Carbon Steel ANSI Class 150 Flanged Std. Port Ball Valve 4" – 10" Short Pattern STANDARDS COMPLIANCE STANDARD FEATURES Refer to page D-A Refer to page D-A MATERIALS OF CONSTRUCTION OPTIONS AVAILABLE: Description 1. Body 2. Retainer 3. Ball 4. Stem 5. Packing Gland 6. Stem Seals 7. Seats 8. Gland Screws 9. Gland Plate 10. Adapter Screw 11. Handle Adapter 12. Stem Bearing 13. Stop 14. Stop Screw 15. Lock Plate 16. Body Seal 17. Lockwasher 18. Grounding Spring 19. Adapter Screw SUFFIX -14-21-24-35-38-49-57-60-65-69-70-80-MG-MH- Material ASTM A216-WCB ASTM A216-WCB or A108 Type 1215 ASTM A108 Type 1215 (Chrome Plate) ASTM A108 Type 1215 (Chrome Plate) ASTM A108 Type 1215 PTFE RPTFE ASTM A193 B7 316 Stainless Steel 18-8 Stainless Steel 316 Stainless Steel RPTFE ASTM A108 Type 1215 SAE J429 Grade 2 ASTM A366 Stainless Steel RPTFE 302 or 304 Stainless Steel Stainless Steel 18-8 Stainless Steel -MJ-MK- OPTION Side Vented Ball (Uni-Directional) UHMWPE Seats Fire Safe (Graphite Packing and Seal) PTFE Seats and Seals PEEK Seats and Graphite Packing Assembled Dry Oxygen Cleaned (Stainless Steel Valves Only) Grounded Ball and Stem MPTFE Seats and Graphite Packing Drilled and Tapped Purge Ports with Plugs Extended Bonnet Multi-Seal (Super TFE) Gear Operator with Standard Handwheel Gear Operator with Standard Handwheel & Locking Device Gear Operator with Oversize Handwheel Gear Operator with Oversize Handwheel & Locking Device VARIATIONS AVAILABLE: 88B-130 Series (Ni-Cu Ball & Stem) 88B-140 Series (316 SS Ball & Stem) For Pressure/Temperature Ratings, Refer to Page M-7, Graph No. 1 NUMBER 88B-10A-01 88B-10C-01 88B-10E-01 88B-10G-01 D-36 Back SIZE 4” 6” 8” 10” A 3.00 4.00 6.00 8.00 B 9.00 10.50 11.50 13.00 C 4.18 5.25 5.75 6.50 D 8.80 9.90 13.61 15.49 E 0.50 0.50 1.00 1.00 F 4.75 5.94 7.63 9.50 G 5.95 7.13 9.36 11.23 H 2.840 2.840 4.596 4.596 I 1.420 1.420 2.298 2.298 COPYRIGHT ©2003 CONBRACO IND., INC. – PRINTED IN U.S.A. J 1.250 1.250 2.000 2.000 K 0.725 0.725 1.375 1.375 L 3/8-16 3/8-16 3/4-10 3/4-10 M 4.00 6.00 8.00 10.0 Prev. Page | WT. 72 Next 210 87-100 Series Stainless Steel ANSI Class 150 Flanged Ball Valve ANSI Class 150 Flanged Ends, 275 psig WOG, Cold Non-Shock. 150 psig Saturated Steam. Vacuum Service to 29 inches Hg. Federal Specification: WW-V-35C, Type: II, Composition: SS, Style: 3. FEATURES (1/2" to 1") • Investment cast body • Meets NACE MR-01-75 • Adjustable packing gland • Unibody construction • RPTFE seats and seals • Corrosion resistant • Actuator mounting provisions • (-24) Certified to API standard 607, 4th Edition • Blow-out-proof stem design • Field repairable • Positive shut-off STANDARD MATERIAL LIST 1. Lever and grip 2. Stem packing 3. Stem bearing 4. Ball 5. Seat (2) 6. Retainer 304 SS w/vinyl RPTFE (1/2" to 1") RPTFE A276-316 RPTFE A276-316 or A351-CF8M 7. Packing gland 8. Stem 9. Lever nut 10. Body 11. Body seal A276-316 A276-316 304 SS A351-CF8M PTFE OPTIONS AVAILABLE: (SUFFIX) -02-03-04-08-14-15-18-21-24-27-35-47-48-49-57-60-65- Contact factory for actuator mounting dimensions. OPTION Static Grounded 1-1/4" CS Stem Extension 2-1/4" CS Stem Extension 90º Reversed Stem Vented Ball (see page J-2) Round Handle Plain Yellow Grip UHMWPE Seats (Non-PTFE) Graphite Stem Packing Latch Lock Lever PTFE Trim SS Oval Latch-Lock Handle SS Oval Handle Assembled Dry Cleaned For Gaseous Oxygen Static Grounded Ball & Stem Multifill Seats & Graphite Packing SIZES 1/2" to 1" 1/2" to 1" 1/2" to 1" 1/2" to 1" 1/2" to 1" 1/2" to 1" 1/2" to 1" 1/2" to 1" 1/2" to 1" 1/2" to 1" 1/2" to 1" 1/2" to 1" 1/2" to 1" 1/2" to 1" 1/2" to 1" 1/2" to 1" 1/2" to 1" For Pressure/Temperature Ratings, Refer to Page M-7, Graph No. 2 SS ANSI CLASS 150 FLANGED BALL VALVE (1/2" to 1") NUMBER SIZE 87-103-01 1/2" 87-104-01 3/4" 87-105-01 1" Back A .50 .62 .87 B .62 .62 .62 C D 4.25 1.87 4.62 1.91 5.00 1.94 E 2.37 2.75 3.12 F 4.37 4.87 4.87 G 2.56 2.93 3.12 H 4 4 4 I 3.50 3.88 4.25 J 1.38 1.69 2.00 K .43 .50 .50 Wt. 3.2 4.6 6.1 COPYRIGHT ©2003 CONBRACO IND., INC. – PRINTED IN U.S.A. Prev. Page | NextD-37 88-100 Series Carbon Steel ANSI Class 150 Flanged Ball Valve ANSI Class 150 Flanged Ends, 285 psig WOG, Cold Non-Shock. 150 psig Saturated Steam. Vacuum Service to 29 inches Hg. Federal Specification: WW-V-35C, Type: II, Composition: CS, Style: 3. FEATURES (1/2" to 1") • Investment cast body • Positive shut-off • Adjustable packing gland • Unibody construction • RPTFE seats and seals • Corrosion resistant • (-24) Certified to API standard 607, 4th Edition • Blow-out-proof stem design • Field repairable • Nitride corrosion protection • Actuator mounting provisions STANDARD MATERIAL LIST 1. Lever and grip 2. Stem packing 3. Stem bearing 4. Ball 5. Seat (2) 6. Retainer Steel, zinc plated w/vinyl RPTFE RPTFE A108-CS chrome plated RPTFE A108-CS 7. Packing gland 8. Stem 9. Lever nut 10. Body 11. Body seal A108-CS A108-CS Steel, zinc plated A216-WCB PTFE VARIATIONS AVAILABLE: 88-140 Series (316 SS Ball & Stem) OPTIONS AVAILABLE: (SUFFIX) -02-03-04-08-10-14-15-18-21-24-35-47-48-65-67- Contact factory for actuator mounting dimensions. OPTION Stem Grounded 1-1/4" CS Stem Extension 2-1/4" CS Stem Extension 90º Reversed Stem SS Lever & Nut Side Vented Ball (Uni-Directional) Wheel Handle, Steel Plain Yellow Grip UHMWPE Trim (Non-PTFE) Graphite Packing VTFE Trim SS Oval Latch-Lock Handle & Nut SS Oval Handle (No Latch) & Nut Multifill Seats & Graphite Packing Cleaned For Industrial Gas - CS Valves SIZES 1/2" to 1" 1/2" to 1" 1/2" to 1" 1/2" to 1" 1/2" to 1" 1/2" to 1" 1/2" to 1" 1/2" to 1" 1/2" to 1" 1/2" to 1" 1/2" to 1" 1/2" to 1" 1/2" to 1" 1/2" to 1" 1/2" to 1" For Pressure/Temperature Ratings, Refer to Page M-7, Graph No. 1 CARBON STEEL ANSI CLASS 150 FLANGED BALL VALVE (1/2" to 1") NUMBER SIZE 88-103-01 1/2" 88-104-01 3/4" 88-105-01 1" D-38 Back A .50 .62 .87 B .62 .62 .62 C D 4.25 1.87 4.62 1.91 5.00 1.94 E 2.37 2.75 3.12 F 4.37 4.87 4.87 G 2.56 2.93 3.12 H 4 4 4 I 3.50 3.88 4.25 J 1.38 1.69 2.00 K .43 .50 .50 Wt. 3.2 4.5 6.1 COPYRIGHT ©2003 CONBRACO IND., INC. – PRINTED IN U.S.A. Prev. Page | Next 87A-500 Series Alloy 20 ANSI Class 150 Flanged Full Port Ball Valve 1/2" through 1" STANDARDS COMPLIANCE STANDARD FEATURES Refer to page D-A Refer to page D-A MATERIALS OF CONSTRUCTION OPTIONS AVAILABLE: Description 1. Body 2. Retainer 3. Ball 4. Stem 5. Packing Gland 6. Stem Seals 7. Seats 8. Gland Screws 9. Gland Plate 10. Stem Nut 11. Lever 12. Stem Bearing 13. Stop 14. Stop Screw 15. Lock Plate 16. Body Seal 17. Lockwasher 18. Grounding Spring (SUFFIX) -01-14-15-21-24-35-38-49-57-65-69-70-80- Material ASTM A351 CN7M ASTM B473 (UNS N08020) ASTM B473 (UNS N08020) ASTM B473 (UNS N08020) ASTM A276 Type 316 PTFE RPTFE ASTM A193 B8 Class 1 302 or 304 SS 316 SS 302 or 304 SS with Vinyl Grip RPTFE ASTM A276 Type 316 18-8 SS 302 or 304 SS RPTFE 302 or 304 SS SS OPTION Standard (Locking and Grounded) Side Vented Ball (Uni-Directional) Wheel Handle, Steel UHMWPE Seats Fire Safe (Graphite Packing and Seal) PTFE Seats and Seals PEEK Seats and Graphite Packing Assembled Dry Oxygen Cleaned MPTFE Seats and Graphite Packing Drilled and Tapped Purge Port with Plug 4” Extended Bonnet Multi-Seal (Super TFE) 87A/88A Series For Pressure/Temperature Ratings, Refer to Page M-14, Graph No. 18 NUMBER 87A-503-01 87A-504-01 87A-505-01 SIZE 1/2" 3/4" 1" Back A 0.500 0.750 1.00 B 4.25 4.62 5.00 C 2.06 2.18 2.32 D 3.28 3.89 3.62 E 5.14 5.56 6.03 F 0.30 0.39 0.47 G 1.09 1.65 1.62 H 1.38 1.96 2.15 I 1.002 1.392 1.392 COPYRIGHT ©2003 CONBRACO IND., INC. – PRINTED IN U.S.A. J 0.501 0.696 0.696 K 0.376 0.500 0.500 L 0.250 0.287 0.287 M 10-24 1/4-20 1/4-20 Prev. Page | WT. 5.0 6.0 7.0 Next D-39 87A-400 Series Alloy 20 ANSI Class 150 Flanged Standard Port Ball Valve 1-1/2" through 2" STANDARDS COMPLIANCE STANDARD FEATURES Refer to page D-A Refer to page D-A MATERIALS OF CONSTRUCTION OPTIONS AVAILABLE: Description 1. Body 2. Retainer 3. Ball 4. Stem 5. Packing Gland 6. Stem Seals 7. Seats 8. Gland Screws 9. Gland Plate 10. Stem Nut 11. Lever 12. Stem Bearing 13. Stop 14. Stop Screw 15. Lock Plate 16. Body Seal 17. Lockwasher 18. Grounding Spring (SUFFIX) -01-14-15-21-24-35-38-49-57-60-65-69-80- Material ASTM A351 CN7M ASTM B473 (UNS N08020) ASTM B473 (UNS N08020) ASTM B473 (UNS N08020) ASTM A276 Type 316 PTFE RPTFE ASTM A193 B8 Class 1 302 or 304 SS 316 SS 302 or 304 SS with Vinyl Grip RPTFE ASTM A276 Type 316 18-8 SS 302 or 304 SS RPTFE 302 or 304 SS SS OPTION Standard Side Vented Ball (Uni-Directional) Wheel Handle, Steel UHMWPE Seats Fire Safe (Graphite Packing and Seal) PTFE Seats and Seals PEEK Seats and Graphite Packing Assembled Dry Oxygen Cleaned Grounded Ball and Stem MPTFE Seats and Graphite Packing Drilled and Tapped Purge Port with Plug Multi-Seal (Super TFE) 87A/88A Series For Pressure/Temperature Ratings, Refer to Page M-14, Graph No. 18 NUMBER SIZE 87A-407-01A 1-1/2" 87A-408-01 2" D-40 Back A 1.00 1.50 B 6.50 7.00 C 3.69 3.69 D 3.62 4.62 E 6.03 6.65 F 0.47 0.72 G 1.62 2.41 H 2.15 3.09 I 1.392 1.949 COPYRIGHT ©2003 CONBRACO IND., INC. – PRINTED IN U.S.A. J 0.696 0.974 K 0.500 0.625 L 0.287 0.412 M 1/4-20 5/16-18 Prev. Page | N 1.50 2.00 Next WT. 9.0 18.0 87A-400 Series Alloy 20 ANSI Class 150 Flanged Standard Port Ball Valve - 3" STANDARDS COMPLIANCE STANDARD FEATURES Refer to page D-A Refer to page D-A MATERIALS OF CONSTRUCTION OPTIONS AVAILABLE: Description 1. Body 2. Retainer 3. Ball 4. Stem 5. Packing Gland 6. Stem Seals 7. Seats 8. Gland Screws 9. Gland Plate 10. Stem Nut 11. Lever 12. Stem Bearing 13. Stop 14. Stop Screw 15. Lock Plate 16. Body Seal 17. Grounding Spring 18. Body Joint Stud 19. Body Joint Nut 20. Lockwasher (SUFFIX) -01-14-21-24-35-38-49-57-60-65-69-70-80-MG-MH- Material ASTM A351 CN7M ASTM A351 CN7M ASTM B473 (UNS N08020) or CN7M ASTM B473 (UNS N08020) ASTM A276 Type 316 PTFE RPTFE ASTM A193 B8 Class 1 316 SS 18-8 SS 316 SS with Vinyl Grip RPTFE ASTM A276 Type 316 316 SS 302 or 304 SS RPTFE SS ASTM A193 Grade B8M ASTM A194 Grade 8 302 or 304 SS -MJ-MK- OPTION Standard Side Vented Ball (Uni-Directional) UHMWPE Seats Fire Safe (Graphite Packing and Seal) PTFE Seats and Seals PEEK Seats and Graphite Packing Assembled Dry Oxygen Cleaned Grounded Ball and Stem MPTFE Seats and Graphite Packing Drilled and Tapped Purge Ports with Plugs 4" Extended Bonnet Multi-Seal (Super TFE) 87A/88A Series Gear Operator with Standard Handwheel Gear Operator with Standard Handwheel & Locking Device Gear Operator with Oversize Handwheel Gear Operator with Oversize Handwheel & Locking Device For Pressure/Temperature Ratings, Refer to Page M-14, Graph No. 18 NUMBER 87A-400-01 SIZE 3" Back A 2.50 B 8.00 C 3.51 D 6.23 E 8.40 F 0.80 G 3.93 H 4.70 I 1.949 COPYRIGHT ©2003 CONBRACO IND., INC. – PRINTED IN U.S.A. J 0.974 K 0.750 L 0.477 M 5/16-18 Prev. Page | N WT. 3.00 34.3 Next D-41 87A-400 Series Alloy 20 ANSI Class 150 Flanged Standard Port Ball Valve - 4" STANDARDS COMPLIANCE STANDARD FEATURES Refer to page D-A Refer to page D-A MATERIALS OF CONSTRUCTION OPTIONS AVAILABLE: Description 1. Body 2. Retainer 3. Ball 4. Stem 5. Packing Gland 6. Stem Seals 7. Seats 8. Gland Screws 9. Gland Plate 10. Adapter Screw 11. Handle Adapter 12. Stem Bearing 13. Stop 14. Stop Screw 15. Lock Plate 16. Body Seal 17. Grounding Spring 18. Body Joint Stud 19. Body Joint Nut 20. Adapter Screw 21. Pipe Handle (SUFFIX) -01-14-21-24-35-49-57-60-65-69-70-80-MG-MH- Material ASTM A351 CN7M ASTM A351 CN7M ASTM B473 (UNS N08020) or CN7M ASTM B473 (UNS N08020) ASTM A276 Type 316 PTFE RPTFE ASTM A193 B8 Class 1 316 SS 18-8 SS 316 SS with Vinyl Grip RPTFE ASTM A276 Type 316 316 SS 302 or 304 SS RPTFE SS ASTM A193 Grade B8M ASTM A194 Grade 8 18-8 SS Galvanized Steel (not shown) -MJ-MK- OPTION Standard Side Vented Ball (Uni-Directional) UHMWPE Seats Fire Safe (Graphite Packing and Seal) PTFE Seats and Seals Assembled Dry Oxygen Cleaned Grounded Ball and Stem MPTFE Seats and Graphite Packing Drilled and Tapped Purge Ports with Plugs 4" Extended Bonnet Multi-Seal (Super TFE) 87A/88A Series Gear Operator with Standard Handwheel Gear Operator with Standard Handwheel & Locking Device Gear Operator with Oversize Handwheel Gear Operator with Oversize Handwheel & Locking Device For Pressure/Temperature Ratings, Refer to Page M-14, Graph No. 18 NUMBER SIZE 87A-40A-01 4" D-42 Back A 3.00 B 9.00 C 4.18 D 8.80 E 3.88 F 0.50 G 4.75 H 5.95 I 2.840 COPYRIGHT ©2003 CONBRACO IND., INC. – PRINTED IN U.S.A. J 1.420 K 1.250 L 0.725 M 3/8-16 Prev. Page | N WT. 4.00 73.0 Next SECTION E CONTENTS THREE WAY VALVES DESCRIPTION PAGE 70-600 Series, Threaded Bronze E-1 70-900 Series, Solder Bronze E-2 76-600 Series, Threaded Stainless Steel E-3 77-640 Series, Threaded Bronze Full Port E-4 3-Way Valve Application E-5 Back Prev. Page | Next 70-600 Series 3-Way Diversion Bronze Ball Valve Threaded, 400 psig WOG, Cold Non-Shock. FEATURES • Chromium plated ball • RPTFE seats and stuffing box ring • Blow-out-proof stem design • Adjustable packing gland STANDARD MATERIAL LIST 1. Lever and grip 2. Stem packing 3. Stem bearing 4. Ball 5. Seat (2) 6. Retainer Steel, zinc plated w/vinyl RPTFE RPTFE B16, chrome plated RPTFE B16 (1/4" to 1") B584-C84400 (1-1/4" to 2") 7. Gland nut 8. Stem 9. Lever nut 10. Body seal (1-1/2" to 2") 11. Body B16 B16 Steel, zinc plated PTFE B584-C84400 VARIATIONS AVAILABLE: 70-640 Series (316 SS Ball & Stem) OPTIONS AVAILABLE: (SUFFIX) -02-03-04-05-10-17-21-24-27-35-49-50-56-57-60-P01-T01- OPTION Stem Grounded 1-1/4" CS Stem Extension 2-1/4" CS Stem Extension Plain Ball SS Lever & Nut Rough Chrome Plated - Bronze Valves UHMWPE Seats (Non-PTFE) Graphite Packing SS Latch-Lock Lever & Nut VTFE Trim Assembled Dry 2-1/4" CS Locking Stem Extension Multifill Seats & Packing Oxygen Cleaned Grounded Ball & Stem BSPP (Parallel) Thread Connection BSPT (Tapered) Thread Connection SIZES 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" FLOW PATTERN NOTE: Open port pressure must exceed Closed port pressure. 3-WAY DIVERSION BRONZE BALL VALVE NUMBER SIZE 70-601-01 1/4" 70-602-01 3/8" 70-603-01 1/2" 70-604-01 3/4" 70-605-01 1" 70-606-01 1-1/4" 70-607-01 1-1/2" 70-608-01 2" Back A .37 .37 .50 .68 .81 1.00 1.25 1.50 B 1.12 1.12 1.09 1.50 1.59 1.97 2.21 2.34 C 2.32 2.32 2.25 3.00 3.18 3.95 4.40 4.69 D 1.8 1.8 1.75 2.12 2.25 2.69 2.87 3.00 E 3.88 3.88 3.87 4.87 4.87 5.50 5.50 5.50 F 1.18 1.18 1.18 1.62 1.71 2.01 2.38 2.50 G .875 .875 .87 .87 .87 .93 .94 .94 H 1.37 1.37 1.37 1.37 1.37 1.50 1.50 1.50 I 10-24 10-24 10-24 10-24 10-24 1/4-20 1/4-20 1/4-20 Wt. .91 .88 .76 1.65 2.15 3.85 5.22 6.20 For Pressure/Temperature Ratings,Refer to Page M-8, Graph No. 3 COPYRIGHT ©2003 CONBRACO IND., INC. – PRINTED IN U.S.A. Prev. Page | Next E-1 70-900 Series 3-Way Diversion Bronze Solder End Ball Valve Solder, 400 psig WOG, Cold Non-Shock. FEATURES • Chromium plated ball • RPTFE seats and stuffing box ring • Blow-out-proof stem design • Adjustable packing gland STANDARD MATERIAL LIST 1. Lever and grip 2. Stem packing 3. Stem bearing 4. Ball 5. Seat (2) Steel, zinc plated w/vinyl RPTFE RPTFE B16, chrome plated RPTFE 6. Retainer 7. Gland nut 8. Stem 9. Lever nut 10. Body B16 B16 B16 Steel, zinc plated B584-C84400 VARIATIONS AVAILABLE: 70-940 Series (316 SS Ball & Stem) OPTIONS AVAILABLE: (SUFFIX) -02-03-04-05-10-17-21-24-27-35-49-50-56-57-60- OPTION Stem Grounded 1-1/4" CS Stem Extension 2-1/4" CS Stem Extension Plain Ball SS Lever & Nut Rough Chrome Plated - Bronze Valves UHMWPE Seats (Non-PTFE) Graphite Packing SS Latch-Lock Lever & Nut VTFE Trim Assembled Dry 2-1/4" CS Locking Stem Extension Multifill Seats & Packing Oxygen Cleaned Grounded Ball & Stem SIZES 1/2" to 1" 1/2" to 1" 1/2" to 1" 1/2" to 1" 1/2" to 1" 1/2" to 1" 1/2" to 1" 1/2" to 1" 1/2" to 1" 1/2" to 1" 1/2" to 1" 1/2" to 1" 1/2" to 1" 1/2" to 1" 1/2" to 1" FLOW PATTERN NOTE: Open port pressure must exceed Closed port pressure. The 70-900 is designed to be soft soldered into lines without disassembly. This allows a tested valve to be installed without disturbing the seats and seals in any way. Soldering temperature not to exceed 500ºF. For Pressure/Temperature Ratings, Refer to Page M-8, Graph No. 3 3-WAY DIVERSION BRONZE BALL VALVE NUMBER 70-903-01 70-904-01 70-905-01 E-2 SIZE 1/2" 3/4" 1" Back A .50 .68 .81 B 1.44 1.94 2.19 C 2.87 3.87 4.42 D 1.75 2.12 2.25 E 3.87 4.87 4.87 F 1.34 1.69 1.87 G .628 .878 1.129 H .50 .90 .90 Wt. .76 1.65 2.15 COPYRIGHT ©2003 CONBRACO IND., INC. – PRINTED IN U.S.A. Prev. Page | Next 76-600 Series 3-Way Diversion Stainless Steel Ball Valve Threaded, 800 psig WOG, Cold Non-Shock. FEATURES • RPTFE seats and stuffing box ring • Meets NACE MR-01-75 • Blow-out-proof stem design • Adjustable packing gland • Investment cast body STANDARD MATERIAL LIST 1. Lever and grip 2. Stem packing 3. Stem bearing 4. Ball 5. Seat (2) 6. Retainer 304 SS w/vinyl RPTFE RPTFE A276-316 RPTFE A276-316 (1/4" to 1") A351-CF8M (1-1/2" to 2") 7. Gland nut 8. Stem 9. Lever nut 10. Body seal (1-1/2" to 2") 11. Body A276-316 A276-316 18-8 SS PTFE A351-CF8M OPTIONS AVAILABLE: (SUFFIX) -02-03-04-21-24-27-35-49-50-56-57- OPTION Stem Grounded 1-1/4" CS Stem Extension 2-1/4" CS Stem Extension UHMWPE Seats (Non-PTFE) Graphite Packing SS Latch-Lock Lever & Nut VTFE Trim Assembled Dry 2-1/4" CS Locking Stem Extension Multifill Seats & Packing Oxygen Cleaned -60- Grounded Ball & Stem -P01-T01- BSPP (Parallel) Thread Connection BSPT (Tapered) Thread Connection SIZES 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" FLOW PATTERN NOTE: Open port pressure must exceed Closed port pressure. 3-WAY DIVERSION STAINLESS STEEL BALL VALVE NUMBER SIZE 76-601-01 1/4" 76-602-01 3/8" 76-603-01 1/2" 76-604-01 3/4" 76-605-01 1" 76-607-01 1-1/2" 76-608-01 2" Back A .37 .37 .50 .68 .81 1.25 1.50 B 1.12 1.12 1.12 1.50 1.60 2.21 2.75 C 2.32 2.32 2.32 3.00 3.21 4.40 5.45 D 1.8 1.8 1.81 2.12 2.25 2.87 3.06 E 3.88 3.88 3.87 4.87 4.87 5.50 5.50 F 1.18 1.18 1.18 1.50 1.68 2.40 2.81 G .875 .875 .87 .87 .87 .94 .94 H 1.37 1.37 1.37 1.37 1.37 1.50 1.50 I 10-24 10-24 10-24 10-24 10-24 1/4-20 1/4-20 Wt. .7 .68 .75 1.45 1.86 4.67 7.02 For Pressure/Temperature Ratings, Refer to Page M-16, Graph No. 21 COPYRIGHT ©2003 CONBRACO IND., INC. – PRINTED IN U.S.A. Prev. Page | Next E-3 77-648-27 Series 2" Full Port 3-Way Diversion Bronze Ball Valve Threaded, 2" 400 psig CWP Cold Non-Shock FEATURES • Cast Body & Retainer • MPTFE seats • MPTFE stuffing box ring • Four Bolt ISO Mounting ISO 5211 (F07) • Blow-out-proof stem design • Adjustable packing gland • SS Lever and Nut • Latch Lock Lever STANDARD MATERIAL LIST 1. Stem packing 2. Stem bearing 3. Ball 4. Seat (2) 5. Retainer 6. Stop MPTFE RPTFE A276 316 SS MPTFE ASTM B584 C84400 A276 316 SS 7. Gland 8. Stem 9. Lever Nut 10. Body 11. Lever and Grip ASTM B-16 A276 316 SS 304 SS ASTM B584 C84400 SS w/Vinyl For Pressure/Temperature Ratings, Refer to Page M-8, Graph No. 3 E-4 Back COPYRIGHT ©2003 CONBRACO IND., INC. – PRINTED IN U.S.A. Prev. Page | Next 3-Way Valves Mixing Vs. Diverting Illustrated to the right are the three normal operating positions for a three-way valve. Apollo’s three-way valve has only two (2) seats as illustrated and as such has limitations for use in both diverter and mixing valve applications. As can be seen from this illustration, there is no off position for port “C”. Ports “A” and “B” cannot be off at the same time. Apollo’s Three-Way Valve as a Mixing Valve When ports “A” and “B” are the inlets, and port “C” is the outlet, the valve becomes a mixing valve. With minor variations in position 2 the percentage of components at “A” and “B” can be varied to the outlet “C”. This has been successfully applied to hydronic systems. It may not be possible to isolate the ports from one another in any position. If the valve is in position 1, and the pressure at port “B” is significantly higher than port “A”, the ball may be forced off the seat allowing mixing from all ports. Whether or not this is a problem depends on the application and its sensitivity to unwanted mixing. Apollo’s Three-Way Valve as a Diverter Valve When port “C” is the inlet, and ports “A” and “B” are the outlets, the valve is a diverter valve. With port “C” as the inlet, flow is diverted to either port “A” (position 1) or “B” (position 3). In position 2, inlet flow from “C” is split to “A” and “B”. Just as described above, it may not be possible to isolate any one port from the other two. That condition is most likely to occur in mixing applications. That is why the valve tends to be promoted as a diverter valve rather than a mixing valve. Back COPYRIGHT ©2003 CONBRACO IND., INC. – PRINTED IN U.S.A. Prev. Page | Next E-5 SECTION F CONTENTS UNION END VALVES DESCRIPTION PAGE 70-300 Series, Threaded Bronze, Single Union End F-1 70-400 Series, Solder Bronze, Single Union End F-2 73-300 Series, Threaded Carbon Steel, Double Union End (UL Listed) F-3 73-400 Series, Socket Weld Carbon Steel, Double Union End (UL Listed) F-4 76-300 Series, Threaded Stainless Steel, Double Union End F-5 76-400 Series, Socket Weld Stainless Steel, Double Union End F-6 Back Prev. Page | Next 70-300 Series Single Union End Bronze Ball Valve Threaded, Single Union End, 600 psig WOG, Cold Non-Shock. 150 psig Saturated Steam, Vacuum Service to 29 inches Hg. Federal Specification: WW-V-35C, Type: II, Composition: BZ, Style: 3. MSS SP-110; Ball Valves Threaded, Socket-Welding, Solder Joint, Grooved and Flared Ends. FEATURES • Chromium plated ball • RPTFE seats and stuffing box ring • Fluorocarbon O-Ring sealed single union requires only light torque to seal • Blow-out-proof stem design • Adjustable packing gland STANDARD MATERIAL LIST 1. Lever and grip 2. Stem packing 3. Stem bearing 4. Ball 5. Seat (2) 6. Retainer 7. Gland nut Steel, zinc plated w/vinyl RPTFE RPTFE B16, chrome plated RPTFE B16 (1/4" to 1-1/2") B584-C84400 (2") B16 VARIATIONS AVAILABLE: 70-320 Series (Adjustable Stop Lever) 70-340 Series (316 SS Ball & Stem) 70-350 Series (Balancing Stop) BRONZE UNION END BALL VALVE NUMBER SIZE 70-301-01 1/4" 70-302-01 3/8" 70-303-01 1/2" 70-304-01 3/4" 70-305-01 1" 70-306-01 1-1/4" 70-307-01 1-1/2" 70-308-01 2" Back A .37 .37 .50 .68 .87 1.00 1.25 1.50 B 1.90 1.90 2.00 2.46 2.78 2.68 2.87 3.25 C 2.93 2.93 3.09 3.96 4.46 4.68 5.06 5.59 D 1.75 1.75 1.75 2.12 2.25 2.62 3.05 3.24 E 3.87 3.87 3.87 4.87 4.87 5.50 8.00 8.00 Wt. .86 .84 .99 1.91 2.42 4.27 5.82 8.55 8. Stem 9. Lever nut 10. Body seal (1-1/4" to 2") 11. Body 12. Tailpiece 13. Union nut 14. Union seal B16 Steel, zinc plated PTFE B584-C84400 B16 or B584-C84400 B16 or B584-C84400 Fluorocarbon OPTIONS AVAILABLE: (SUFFIX) -02-03-04-05-07-08-10-14-15-16-17-18-20-21-24-27-30-32-35-45-46-48-49-50-56-57-58-60-63- OPTION SIZES Stem Grounded 1/4" to 2" 1-1/4" CS Stem Extension 1/4" to 2" 2-1/4" CS Stem Extension 1/4" to 2" Plain Ball 1/4" to 2" Steel Tee Handle 1/4" to 2" 90º Reversed Stem 1/4" to 2" SS Lever & Nut 1/4" to 2" Side Vented Ball (Uni-Directional) 1/4" to 2" Wheel Handle, Steel 1/4" to 2" Chain Lever - Vertical 3/4" to 2" Rough Chrome Plated - Bronze Valves 1/4" to 2" Plain Yellow Grip 1/4" to 2" Slot Vented Ball (Bi-Directional) - Bronze Valves 1/4" to 2" UHMWPE Seats (Non-PTFE) 1/4" to 2" Graphite Packing 1/4" to 2" SS Latch-Lock Lever & Nut 1/4" to 2" Cam-Lock and Grounded 1/4" to 2" SS Tee Handle & Nut 1/4" to 2" VTFE Trim 1/4" to 2" Less Lever & Nut 1/4" to 2" Latch-Lock Lever - Lock in Closed Position Only1/4" to 2" SS Oval Handle (No Latch) & Nut 1/4" to 2" Assembled Dry 1/4" to 2" 2-1/4" CS Locking Stem Extension 1/4" to 2" Multifill Seats & Packing 1/4" to 2" Oxygen Cleaned 1/4" to 2" Chain Lever - Horizontal 3/4" to 2" Grounded Ball & Stem 1/4" to 2" NPT x Solder 3/8" to 2" For Pressure/Temperature Ratings, Refer to Page M-8, Graph No. 4 COPYRIGHT ©2003 CONBRACO IND., INC. – PRINTED IN U.S.A. Prev. Page | Next F-1 70-400 Series Single Union End Solder Bronze Ball Valve Solder Ends, Single Union End, 600 psig WOG, Cold Non-Shock. 150 psig Saturated Steam, Vacuum Service to 29 inches Hg. Federal Specification: WW-V-35C, Type: II, Composition: BZ, Style: 3. MSS SP-110; Ball Valves Threaded, Socket-Welding, Solder Joint, Grooved and Flared Ends. FEATURES • Chromium plated ball • RPTFE seats and stuffing box ring • Fluorocarbon O-Ring sealed single union requires only light torque to seal • Blow-out-proof stem design • Adjustable packing gland STANDARD MATERIAL LIST 1. Lever and grip 2. Stem packing 3. Stem bearing 4. Ball 5. Seat (2) 6. Retainer 7. Gland nut Steel, zinc plated w/vinyl RPTFE RPTFE B16, chrome plated RPTFE B16 or B584-C84400 B16 8. Stem 9. Lever nut 10. Body seal (1-1/4" to 2") 11. Body 12. Tailpiece 13. Union nut 14. Union seal B16 Steel, zinc plated PTFE B584-C84400 B16 or B584-C84400 B16 or B584-C84400 Fluorocarbon OPTIONS AVAILABLE: VARIATIONS AVAILABLE: 70-420 Series (Adjustable Stop Lever) 70-440 Series (316 SS Ball & Stem) 70-450 Series (Balancing Stop) The 70-400 is designed to be soft soldered into lines without disassembly. This allows a tested valve to be installed without disturbing the seats and seals in any way. Soldering temperature not to exceed 500ºF. (SUFFIX) OPTION -02-03-04-05-07-08-10-14-15-16-17-18-20-21-24-27-30-32-35-45-46-48-49-50-56-57-58-60-63- Stem Grounded 3/8" to 2" 1-1/4" CS Stem Extension 3/8" to 2" 2-1/4" CS Stem Extension 3/8" to 2" Plain Ball 3/8" to 2" Steel Tee Handle 3/8" to 2" 90º Reversed Stem 3/8" to 2" SS Lever & Nut 3/8" to 2" Side Vented Ball (Uni-Directional) 3/8" to 2" Wheel Handle, Steel 3/8" to 2" Chain Lever - Vertical 3/4" to 2" Rough Chrome Plated - Bronze Valves 3/8" to 2" Plain Yellow Grip 3/8" to 2" Slot Vented Ball (Bi-Directional) - Bronze Valves 3/8" to 2" UHMWPE Seats (Non-PTFE) 3/8" to 2" Graphite Packing 3/8" to 2" SS Latch-Lock Lever & Nut 3/8" to 2" Cam-Lock and Grounded 3/8" to 2" SS Tee Handle & Nut 3/8" to 2" VTFE Trim 3/8" to 2" Less Lever & Nut 3/8" to 2" Latch-Lock Lever - Lock in Closed Position Only3/8" to 2" SS Oval Handle (No Latch) & Nut 3/8" to 2" Assembled Dry 3/8" to 2" 2-1/4" CS Locking Stem Extension 3/8" to 2" Multifill Seats & Packing 3/8" to 2" Oxygen Cleaned 3/8" to 2" Chain Lever - Horizontal 3/4" to 2" Grounded Ball & Stem 3/8" to 2" NPT x Solder 3/8" to 2" SIZES SINGLE UNION END SOLDER BRONZE BALL VALVE NUMBER SIZE 70-402-01 3/8" 70-403-01 1/2" 70-404-01 3/4" 70-405-01 1" 70-406-01 1-1/4" 70-407-01 1-1/2" 70-408-01 2" F-2 Back A .37 .50 .68 .87 1.00 1.25 1.50 B 1.81 2.00 2.62 2.81 2.87 2.92 3.50 C 3.09 3.43 4.56 5.06 5.18 5.53 6.75 D 1.75 1.75 2.06 2.25 2.62 3.10 3.24 E 3.87 3.87 4.78 4.78 5.50 8.00 8.00 F G .503 .37 .628 .50 .878 .75 1.129 .90 1.378 .96 1.629 1.09 2.129 1.34 Wt. .85 1.02 1.93 2.42 4.11 5.44 7.77 For Pressure/Temperature Ratings, Refer to Page M-8, Graph No. 4 COPYRIGHT ©2003 CONBRACO IND., INC. – PRINTED IN U.S.A. Prev. Page | Next 73-300 Series Carbon Steel Double Union End Ball Valve Threaded, 3000 psig WOG, Cold Non-Shock, 150 psig Saturated Steam. Vacuum Service to 29 inches Hg. Federal Specification: WW-V-35C, Type II, Composition: CS, Style: 1 MSS SP-110; Ball Valves Threaded, Socket-Welding, Solder Joint, Grooved and Flared Ends. FEATURES • Heavy duty quarter turn lever • RPTFE seats and seals • Steel barstock design • Easy installation and maintenance • Blow-out-proof stem design • Adjustable packing gland • Chromium plated ball • Nitride corrosion protection UL LISTINGS @ 250 PSIG MAX U® L • Guide YRPV: Gas shutoff valve for use with natural and manufactured gases. • Guide YSDT: LP gas shutoff valve. • Guide YRBX: Flammable liquid shutoff valve. Note: Listings apply ONLY to the standard -01 valves. LISTED STANDARD MATERIAL LIST 1. Lever and grip 2. Stem packing 3. Stem bearing 4. Ball 5. Tailpiece (2) 6. Retainer 7. Gland nut 8. Stem Steel, zinc plated w/vinyl RPTFE RPTFE A108-CS chrome plated A108-CS A108-CS A108-CS A108-CS chrome plated 9. Lever nut 10. Body 11. Seat (2) 12. Union nut (2) 13. Seat holder 14. Union seal (2) 15. Retainer seal Steel, zinc plated A108-CS RPTFE A108-CS A108-CS RPTFE RPTFE VARIATIONS AVAILABLE: 73-340 Series (316 SS Ball & Stem) OPTIONS AVAILABLE: CARBON STEEL DOUBLE UNION END BALL VALVE NUMBER SIZE 73-301-01 1/4" 73-302-01 3/8" 73-303-01 1/2" 73-304-01 3/4" 73-305-01 1" 73-306-01 1-1/4" 73-307-01 1-1/2" 73-308-01 2" Back A .43 .57 .62 .81 1.00 1.25 1.50 1.75 B 2.50 2.50 2.50 2.71 2.96 2.87 3.46 3.75 C 5.00 5.00 5.00 5.31 6.06 6.12 7.12 7.50 D 2.50 2.50 2.50 2.62 3.12 3.43 3.56 4.18 E 5.62 5.62 5.62 5.62 6.62 8.00 8.00 9.00 Wt. 3.51 3.45 3.35 4.48 7.04 9.96 14.83 20.50 (SUFFIX) -02-07-08-10-14-15-18-19-21-22-29-45-60-63-64-P01-T01- OPTION Stem Grounded Steel Tee Handle 90º Reversed Stem SS Lever & Nut Side Vented Ball (Uni-Directional) Wheel Handle, Steel Plain Yellow Grip Lock Plate UHMWPE Seats (Non-PTFE) Viton Union Seals Graphite Packing & Seals Less Lever & Nut Grounded Ball & Stem Threaded x Socket Weld 250# Steam Trim BSPP (Parallel) Thread Connection BSPT (Tapered) Thread Connection SIZES 1/4" to 2" 1/4" to 1-1/2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 1" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/2" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" For Pressure/Temperature Ratings, Refer to Page M-13, Graph No. 15 COPYRIGHT ©2003 CONBRACO IND., INC. – PRINTED IN U.S.A. Prev. Page | Next F-3 73-400 Series Carbon Steel Double Union End Socket Weld Ball Valve Socket Weld End, 3000 psig WOG, Cold Non-Shock, 150 psig Saturated Steam. Vacuum Service to 29 inches Hg. Federal Specification: WW-V-35C, Type II, Composition: CS, Style: 1 MSS SP-110; Ball Valves Threaded, Socket-Welding, Solder Joint, Grooved and Flared Ends. FEATURES • Heavy duty quarter turn lever • RPTFE seats and seals • Steel barstock design • Easy installation and maintenance • Blow-out-proof stem design • Adjustable packing gland • Chromium plated ball • Nitride corrosion protection UL LISTINGS @ 250 PSIG MAX U® L • Guide YRPV: Gas shutoff valve for use with natural and manufactured gases. • Guide YSDT: LP gas shutoff valve. • Guide YRBX: Flammable liquid shutoff valve. Note: Listings apply ONLY to the standard -01 valves. LISTED STANDARD MATERIAL LIST 1. Lever and grip 2. Stem packing 3. Stem bearing 4. Ball 5. Seat (2) 6. Retainer 7. Gland nut 8. Stem Steel, zinc plated w/vinyl RPTFE RPTFE A108-CS chrome plated RPTFE A108-CS A108-CS A108-CS chrome plated 9. Lever nut 10. Body 11. Tail piece (2) 12. Union nut (2) 13. Seat holder 14. Union seal (2) 15. Retainer seal Steel, zinc plated A108-CS A108-1018 A108-CS A108-CS RPTFE RPTFE VARIATIONS AVAILABLE: 73-440 Series (316 SS Ball & Stem) OPTIONS AVAILABLE: (SUFFIX) -02-07-08-10-14-15-18-19-21-22-29-45-60-64- OPTION Stem Grounded Steel Tee Handle 90º Reversed Stem SS Lever & Nut Side Vented Ball (Uni-Directional) Wheel Handle, Steel Plain Yellow Grip Lock Plate UHMWPE Trim (non-PTFE) Viton Union Seals Graphite Packing & Seals Less Lever & Nut Grounded Ball & Stem 250# Steam Trim SIZES 1/2" to 2" 1/2" to 1-1/2" 1/2" to 2" 1/2" to 2" 1/2" to 2" 1/2" to 1" 1/2" to 2" 1/2" to 2" 1/2" to 2" 1/2" to 2" 1/2" to 2" 1/2" to 2" 1/2" to 2" 1/2" to 2" CARBON STEEL DOUBLE UNION END SOCKET WELD BALL VALVE NUMBER SIZE 73-403-01 1/2" 73-404-01 3/4" 73-405-01 1" 73-406-01 1-1/4" 73-407-01 1-1/2" 73-408-01 2" F-4 Back A .62 .81 1.00 1.25 1.50 1.75 B 2.50 2.71 2.93 2.87 3.46 3.75 C 5.00 5.31 6.06 6.12 7.12 7.50 D 2.50 2.62 3.12 3.43 3.56 4.18 E 5.62 5.62 6.62 8.00 8.00 9.00 F .43 .56 .68 .81 .81 1.06 G Wt. .855 3.35 1.065 4.48 1.330 7.04 1.675 9.96 1.915 14.83 2.406 20.50 For Pressure/Temperature Ratings, Refer to Page M-13, Graph No. 15 COPYRIGHT ©2003 CONBRACO IND., INC. – PRINTED IN U.S.A. Prev. Page | Next 76-300 Series Double Union End Stainless Steel Ball Valve Threaded, 1/2" to 1" 2000 psig WOG, 1-1/4" to 2" 1500 psig WOG. Cold Non-Shock. 150 psig Saturated Steam, Vacuum Service to 29 inches Hg. Federal Specification: WW-V-35C, Type: II, Composition: SS, Style: 1. MSS SP-110; Ball Valves Threaded, Socket-Welding, Solder Joint, Grooved and Flared Ends. FEATURES • Heavy duty quarter turn handles • RPTFE seats and seals • Blow-out-proof stem design • Adjustable packing gland STANDARD MATERIAL LIST 1. Lever and grip 2. Stem packing 3. Stem bearing 4. Ball 5. Seat (2) 6. Retainer 7. Gland nut 8. Stem 304 SS w/vinyl RPTFE RPTFE A276-316 RPTFE A276-316 A276-316 A276-316 9. Lever nut 10. Body 11. Tailpiece (2) 12. Union nut (2) 13. Seat holder 14. Union seal (2) 15. Retainer seal 18-8 SS A351-CF8M A276-316 Nitride A108-CS A276-316 RPTFE RPTFE OPTIONS AVAILABLE: (SUFFIX) -02-03-04-07-08-14-15-18-22-27-29-32-45-46-49-57-60-63-64-P01-T01- STAINLESS STEEL DOUBLE UNION END BALL VALVE NUMBER SIZE 76-303-01 1/2" 76-304-01 3/4" 76-305-01 1" 76-306-01 1-1/4" 76-307-01 1-1/2" 76-308-01 2" Back A .62 .81 1.00 1.25 1.50 1.75 B 2.27 2.46 2.89 2.88 3.43 3.75 C 4.33 4.51 5.45 5.32 6.43 6.87 D 2.12 2.31 2.75 2.97 3.39 4.12 E 4.87 4.87 5.50 5.50 7.87 9.87 Wt. 2.88 3.81 5.98 8.47 12.61 16.88 OPTION SIZES Stem Grounded 1/2" to 2" 1-1/4" CS Stem Extension 1/2" to 1-1/2" 2-1/4" CS Stem Extension 1/2" to 1-1/2" Steel Tee Handle 1/2" to 1-1/2" 90º Reversed Stem 1/2" to 2" Side Vented Ball (Uni-Directional) 1/2" to 2" Wheel Handle, Steel 1/2" to 1-1/2" Plain Yellow Grip 1/2" to 2" Viton Union Seals 1/2" to 2" SS Latch-Lock Lever & Nut 1/2" to 1-1/2" Graphite Packing & Seals 1/2" to 2" SS Tee Handle & Nut 1/2" to 1-1/2" Less Lever & Nut 1/2" to 2" Latch-Lock Lever - Lock in Closed Position Only1/2" to 1-1/2" Assembled Dry 1/2" to 2" Oxygen Cleaned 1/2" to 2" Grounded Ball & Stem 1/2" to 2" Threaded x Socket Weld 1/2" to 2" 250# Steam Trim 1/2" to 2" BSPP (Parallel) Thread Connection 1/2" to 2" BSPT (Tapered) Thread Connection 1/2" to 2" For Pressure/Temperature Ratings, Refer to Page M-12, Graph No. 14 (1/2" to 1") Refer to Page M-11, Graph No.12 (1-1/4" to 2") COPYRIGHT ©2003 CONBRACO IND., INC. – PRINTED IN U.S.A. Prev. Page | Next F-5 76-400 Series Stainless Steel Double Union End Socket Weld Ball Valve Socket Weld, 1/2" to 1" 2000 psig WOG, 1-1/4" to 2" 1500 psig WOG. Cold Non-Shock. 150 psig Saturated Steam, Vacuum Service to 29 inches Hg. Federal Specification: WW-V-35C, Type: II, Composition: SS, Style: 1. MSS SP-110; Ball Valves Threaded, Socket-Welding, Solder Joint, Grooved and Flared Ends. FEATURES • Heavy duty quarter turn handles • RPTFE seats and seals • Blow-out-proof stem design • Adjustable packing gland STANDARD MATERIAL LIST 1. Lever and grip 2. Stem packing 3. Stem bearing 4. Ball 5. Seat (2) 6. Retainer 7. Gland nut 8. Stem 304 SS w/vinyl RPTFE RPTFE A276-316 RPTFE A276-316 A276-316 A276-316 9. Lever nut 10. Body 11. Tailpiece (2) 12. Union nut (2) 13. Seat holder 14. Union seal (2) 15. Retainer seal 18-8 SS A351-CF8M A276-316 Nitride steel A276-316 RPTFE RPTFE OPTIONS AVAILABLE: (SUFFIX) -02-03-04-07-08-14-15-18-22-27-29-32-45-46-49-57-60-64- OPTION SIZES Stem Grounded 1/2" to 2" 1-1/4" CS Stem Extension 1/2" to 1-1/2" 2-1/4" CS Stem Extension 1/2" to 1-1/2" Steel Tee Handle 1/2" to 1-1/2" 90º Reversed Stem 1/2" to 2" Side Vented Ball (Uni-Directional) 1/2" to 2" Wheel Handle, Steel 1/2" to 1-1/2" Plain Yellow Grip 1/2" to 2" Viton Union Seals 1/2" to 2" SS Latch-Lock Lever & Nut 1/2" to 1-1/2" Graphite Packing & Seals 1/2" to 2" SS Tee Handle & Nut 1/2" to 2" Less Lever & Nut 1/2" to 2" Latch-Lock Lever - Lock in Closed Position Only1/2" to 1-1/2" Assembled Dry 1/2" to 2" Oxygen Cleaned 1/2" to 2" Grounded Ball & Stem 1/2" to 2" 250# Steam Trim 1/2" to 2" STAINLESS STEEL DOUBLE UNION END SOCKET WELD BALL VALVE NUMBER SIZE 76-403-01 1/2" 76-404-01 3/4" 76-405-01 1" 76-406-01 1-1/4" 76-407-01 1-1/2" 76-408-01 2" F-6 Back A .62 .81 1.00 1.25 1.50 1.75 B 2.27 2.46 2.89 2.88 3.43 3.75 C 4.33 4.51 5.45 5.32 6.43 6.87 D 2.12 2.31 2.75 2.97 3.39 4.12 E 4.87 4.87 5.50 5.50 7.87 9.87 F .43 .56 .68 .81 .87 1.06 G .855 1.065 1.330 1.675 1.915 2.406 Wt. 2.88 3.81 5.98 8.47 12.61 16.88 For Pressure/Temperature Ratings, Refer to Page M-12, Graph No. 14 (1/2" to 1") Refer to Page M-11, Graph No.12 (1-1/4" to 2") COPYRIGHT ©2003 CONBRACO IND., INC. – PRINTED IN U.S.A. Prev. Page | Next SECTION G CONTENTS STEAM PREP BALL VALVES DESCRIPTION PAGE 70-140-64 Series, Threaded Bronze A-1 71-140-64 Series, Threaded Bronze with Mounting Pad A-4 72-140-64 Series, Threaded High Pressure Carbon Steel A-6 73A-140-64 Series, Threaded A105 Carbon Steel A-8 73-340-64 Series, Threaded Double Union End Carbon Steel F-3 73-440-64 Series, Socket Weld Double Union End Carbon Steel F-4 76-100-64 Series, Threaded Stainless Steel with Mounting Pad A-9 76-300-64 Series, Threaded Double Union End Stainless Steel F-5 76-400-64 Series, Socket Weld Double Union End Stainless Steel F-6 83-540-64 Series, Threaded High Pressure Full Port Carbon Steel with Mounting Pad B-15 86-500-64 Series, Threaded High Pressure Full Port Stainless Steel with Mounting Pad B-19 89-140-64 Series, Threaded Carbon Steel with Mounting Pad A-16 FEATURES • 316 SS Ball and Stem • Valves with -64 Trim Include Yellow Vinyl Grip with Distinctive Red Lettering • Multifill Seats • Multifill Stuffing Box Ring Back • These Valves are Recommended for Saturated Steam to 250 psig. Prev. Page | Next 70-100 Series Bronze Ball Valve Threaded, 600 psig WOG, Cold Non-Shock. 150 psig Saturated Steam. (See referenced P/T charts) Vacuum Service to 29 inches Hg. Federal Specification: WW-V-35C, Type: II, Composition: BZ, Style: 3. MSS SP-110; Ball Valves Threaded, Socket-Welding, Solder Joint, Grooved and Flared Ends. FEATURES • Chromium plated ball • RPTFE seats and stuffing box ring • Blow-out-proof stem design • Adjustable packing gland STANDARD MATERIAL LIST 1. Lever and grip 2. Stem packing 3. Stem bearing 4. Ball 5. Seat (2) 6. Retainer Steel, zinc plated w/vinyl RPTFE RPTFE B16, chrome plated RPTFE B16 (1/4" to 1") B584-C84400 (1-1/4" to 3") VARIATIONS AVAILABLE: 70-120 Series 70-140 Series 70-150 Series 70-190 Series (Adjustable Stop Lever) (316 SS Ball & Stem) (Balancing Stop) (Locked Retainer) A .37 .37 .50 .68 .87 1.00 1.25 1.50 2.00 2.50 3.12 B 1.03 1.03 1.12 1.50 1.68 2.00 2.18 2.34 3.12 3.37 3.68 C 2.06 2.06 2.25 3.00 3.37 4.00 4.37 4.68 6.25 6.75 7.37 D 1.75 1.75 1.75 2.12 2.25 2.62 3.06 3.25 3.72 4.12 5.25 E 3.87 3.87 3.87 4.87 4.87 5.50 8.00 8.00 8.00 8.00 10.00 Wt. .60 .56 .63 1.39 1.72 3.26 4.61 6.06 17.25 18.60 25.50 B16 B16 Steel, zinc plated PTFE B584-C84400 OPTIONS AVAILABLE: (SUFFIX) -02-03-04-05-07-08-10-14-15-16-17-21-24-27-30-32-35-36-39-40-41- BRONZE BALL VALVE NUMBER SIZE 70-101-01 1/4" 70-102-01 3/8" 70-103-01 1/2" 70-104-01 3/4" 70-105-01 1" 70-106-01 1-1/4" 70-107-01 1-1/2" 70-108-01 2" 70-109-01A 2-1/2" 70-100-01 3" 70-10A-01 4" Back 7. Gland nut 8. Stem 9. Lever nut 10. Body seal (1-1/4" to 3") 11. Body -45-46-47-48-49-50-56-57-58-60-63-64-P01-T01- OPTION SIZES Stem Grounded 1/4" to 3" 1-1/4" CS Stem Extension 1/4" to 3" 2-1/4" CS Stem Extension 1/4" to 3" Plain Ball 1/4" to 3" Steel Tee Handle 1/4" to 2" 90º Reversed Stem 1/4" to 3" SS Lever & Nut 1/4" to 3" Side Vented Ball (Uni-Directional) 1/4" to 3" Wheel Handle, Steel 1/4" to 2" Chain Lever - Vertical 3/4" to 2" Rough Chrome Plated - Bronze Valves 1/4" to 3" UHMWPE Trim (Non-PTFE) 1/4" to 3" Graphite Packing 1/4" to 3" SS Latch-Lock Lever & Nut 1/4" to 3" Cam-Lock and Grounded 1/4" to 2" SS Tee Handle & Nut 1/4" to 2" VTFE Trim 1/4" to 3" SS Hi-Rise Round Handle, SS Nut 1/4" to 2" SS Hi-Rise Locking Wheel Handle, SS Nut 1/4" to 2" Cyl-Loc and Grounded 1/4" to 2" Automatic Drain (Bronze Valves Only) 1/4" to 2" see page J-8 Less Lever & Nut 1/4" to 3" Latch Lock Lever - Lock in Closed Position Only 1/4" to 3" SS Oval Latch-Lock Handle & Nut 1/4" to 1" SS Oval Handle (No Latch) & Nut 1/4" to 2" Assembled Dry 1/4" to 3" 2-1/4" CS Locking Stem Extension 1/4" to 3" Multifill Seats & Packing 1/4" to 3" Oxygen Cleaned 1/4" to 3" Chain Lever - Horizontal 3/4" to 2" Static Grounded Ball & Stem 1/4" to 3" NPT x Solder/Socket Weld 3/8" to 3" 250# Steam Trim 1/4" to 3" BSPP (Parallel) Thread Connection 1/4" to 3" BSPT (Tapered) Thread Connection 1/4" to 3" For Pressure/Temperature Ratings, Refer to Page M-8, Graph No. 4 COPYRIGHT ©2003 CONBRACO IND., INC. – PRINTED IN U.S.A. Prev. Page | Next A-1 71-100 Series Bronze Ball Valve With Mounting Pad Threaded, 600 psig WOG, Cold Non-Shock. 150 psig Saturated Steam. (See referenced P/T chart) Vacuum Service to 29 inches Hg. Federal Specification: WW-V-35C, Type: II, Composition: BZ, Style: 3. MSS SP-110; Ball Valves, Threaded, Socket-Welding, Solder Joint, Grooved and Flared Ends FEATURES • Chromium plated ball • RPTFE seats and stuffing box ring • Mounting pad for easy actuator mounting • Blow-out-proof stem design • Adjustable packing gland STANDARD MATERIAL LIST 1. Lever and grip 2. Stem packing 3. Stem bearing 4. Ball 5. Seat (2) 6. Retainer Steel, zinc plated w/vinyl RPTFE RPTFE B16, chrome plated RPTFE B16 (3/4" to 1") B584-C84400 (1-1/4" to 3") B16 B16 7. Gland nut 8. Stem 9. Lever nut 10. Body seal (1-1/4" to 3") 11. Body Steel, zinc plated PTFE B584-C84400 VARIATIONS AVAILABLE: 71-120 Series 71-140 Series 71-150 Series 71-190 Series (Adjustable Stop Lever) (316 SS Ball & Stem) (Balancing Stop) (Locked Retainer) OPTIONS AVAILABLE: (SUFFIX) -02-03-04-05-07-08-10-14-15-16-21-24-27-30-32-35-39-40-41- BRONZE BALL VALVE WITH MOUNTING PAD NUMBER SIZE A 71-104-01 3/4" .68 71-105-01 1" .87 71-106-01 1-1/4" 1.00 71-107-01 1-1/2" 1.25 71-108-01 2" 1.50 71-100-01 3" 2.50 B C D 1.50 1.68 2.00 2.18 2.34 3.37 3.00 3.37 4.00 4.37 4.68 6.75 2.12 2.25 2.62 2.87 3.06 4.12 E F 4.87 .87 4.87 .87 5.50 .93 8.00 .93 8.00 .93 8.00 N/A G 1.37 1.37 1.50 1.50 1.50 2.75 H Wt. 10-24 NC 1.63 10-24 NC 1.86 1/4-20 NC 3.39 1/4-20 NC 4.68 1/4-20 NC 5.72 1/4-20 NC 18.60 -45-46-47-48-49-50-56-57-58-60-64-P01-T01- OPTION SIZES Stem Grounded 3/4" to 3" 1-1/4" CS Stem Extension 3/4" to 3" 2-1/4" CS Stem Extension 3/4" to 3" Plain Ball 3/4" to 3" Steel Tee Handle 3/4" to 2" 90º Reversed Stem 3/4" to 3" SS Lever & Nut 3/4" to 3" Side Vented Ball (Uni-Directional) 3/4" to 3" Wheel Handle, Steel 3/4" to 2" Chain Lever - Vertical 3/4" to 2" UHMWPE Trim (Non-PTFE) 3/4" to 3" Graphite Packing 3/4" to 3" SS Latch-Lock Lever & Nut 3/4" to 3" Cam-Lock and Grounded 3/4" to 2" SS Tee Handle & Nut 3/4" to 2" VTFE Trim 3/4" to 3" SS Hi-Rise Locking Wheel Handle, SS Nut 3/4" to 2" Cyl-Loc and Grounded 3/4" to 2" Automatic Drain (Bronze Valves Only) 3/4" to 2" see page J-8 Less Lever & Nut 3/4" to 3" Latch Lock Lever - Lock in Closed Position Only 3/4" to 3" SS Oval Latch-Lock Handle & Nut 3/4" to 1" SS Oval Handle (No Latch) & Nut 3/4" to 2" Assembled Dry 3/4" to 3" 2-1/4" CS Locking Stem Extension 3/4" to 3" Multifill Seats & Packing 3/4" to 3" Oxygen Cleaned 3/4" to 3" Chain Lever - Horizontal 3/4" to 2" Static Grounded Ball & Stem 3/4" to 3" 250# Steam Trim 3/4" to 3" BSPP (Parallel) Thread Connection 3/4" to 3" BSPT (Tapered) Thread Connection 3/4" to 3" For Pressure/Temperature Ratings, Refer to Page M-8, Graph No. 4 *See 77-140 Series Full Port for 1/4", 3/8", 1/2" and 2-1/2" Sizes A-4 Back COPYRIGHT ©2003 CONBRACO IND., INC. – PRINTED IN U.S.A. Prev. Page | Next 72-100 Series Carbon Steel High Pressure Ball Valve Threaded, 3000 psig WOG, Cold Non-Shock Body rating. (See referenced P/T chart) 150 psig Saturated Steam. Vacuum Service to 29 inches Hg. Federal Specification: WW-V-35C, Type: II, Composition: CS, Style: 3. MSS SP-110; Ball Valves Threaded, Socket-Welding, Solder Joint, Grooved and Flared Ends. FEATURES • Barstock design • RPTFE seats and stuffing box ring • Fire safe design when ordered with graphite packing • Nitride corrosion protection • Adjustable packing gland • Full port, except 2" • Blow-out-proof stem design • Heavy duty lever STANDARD MATERIAL LIST 1. Lever and grip 2. Stem 3. Stem bearing 4. Retainer seal 5. Seat (2) 6. Ball Steel, zinc plated w/vinyl A108-CS chrome plated RPTFE RPTFE RPTFE A108-CS chrome plated VARIATIONS AVAILABLE: 72-140 Series (316 SS Ball & Stem) 7. Gland nut 8. Stem packing 9. Lever nut 10. Body 11. Retainer 12. Seat holder A108-CS RPTFE Steel, zinc plated A108-CS A108-CS A108-CS OPTIONS AVAILABLE: (SUFFIX) -02-03-04-07-08-10-14-15-19-21-24-45-56-60-64-77-78-79- OPTION SIZES Stem Grounded 1/2" to 2" 1-1/4" CS Stem Extension 1" to 1-1/2" 2-1/4" CS Stem Extension 1" to 1-1/2" Steel Tee Handle 1/2" to 1-1/2" 90º Reversed Stem 1/2" to 2" SS Lever & Nut 1/2" to 1-1/2" Side Vented Ball (Uni-Directional) 1/2" to 2" Wheel Handle, Steel 1/2" to 1" Lock Plate 1/2" to 2" UHMWPE Trim (Non-PTFE) 1/2" to 2" Graphite Packing 1/2" to 2" Less Lever & Nut 1/2" to 2" Multifill Seats & Packing 1/2" to 2" Static Grounded Ball & Stem 1/2" to 2" 250# Steam Trim 1/2" to 2" Live Loaded 87A/88A Series (Gear & Actuated) 1/2" to 2" Delrin Seats, Graphite Packing 1/2" to 2" Nylon Seats, Graphite Packing 1/2" to 2" CARBON STEEL HIGH PRESSURE BALL VALVE NUMBER 72-103-01 72-104-01 72-105-01 72-106-01 72-107-01 72-108-01 A-6 SIZE 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" Back A .62 .81 1.00 1.25 1.50 1.75 B 1.46 1.87 2.12 2.32 2.64 3.00 C 2.87 3.80 4.15 4.65 5.23 5.84 D 2.50 2.62 3.12 3.43 3.56 4.18 E 5.62 5.62 6.62 8.00 8.00 9.00 Wt. 1.98 3.09 4.87 7.67 10.50 15.26 For Pressure/Temperature Ratings, Refer to Page M-13, Graph No. 15 COPYRIGHT ©2003 CONBRACO IND., INC. – PRINTED IN U.S.A. Prev. Page | Next 73A-100 Series Carbon Steel Ball Valve AAR Approved #E999032 Threaded, 1/4" to 1" 2000 psig WOG, 1-1/4" to 2" 1500 psig WOG, Cold Non-Shock. 150 psig Saturated Steam. (See referenced P/T chart) Vacuum Service to 29 inches Hg. Federal Specification: WW-V-35C, Type: II, Composition: CS, Style: 3. MSS SP-110; Ball Valves Threaded, Socket-Welding, Solder Joint, Grooved and Flared Ends. FEATURES • RPTFE seats & packing • Forged construction • Raised handle stops • Blow-out-proof stem design • Adjustable packing gland • Nitride corrosion protection • (-24) Fire safe to API 607 4th ed. class 600 burn STANDARD MATERIAL LIST 1. Lever nut 2. Gland nut 3. Stem packing 4. Retainer 5. Body seal Steel, zinc plated A108-CS RPTFE A108-CS RPTFE (1/2" to 2") 6. Ball 7. Seat (2) 8. Body 9. Stem bearing 10. Stem 11. Lever/grip A108-CS chrome plated RPTFE A105 RPTFE A108-CS Steel, zinc plated, with vinyl VARIATIONS AVAILABLE: 73A-140- Series (316 SS Ball & Stem NACE compliant) OPTIONS AVAILABLE: CARBON STEEL BALL VALVE NUMBER 73A-101-01 73A-102-01 73A-103-01 73A-104-01 73A-105-01 73A-106-01 73A-107-01 73A-108-01 A-8 SIZE 1/4" 3/8" 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" Back A .37 .37 .50 .68 .87 1.00 1.25 1.50 B 1.02 1.08 1.18 1.57 1.73 1.98 2.14 2.73 C 2.30 2.37 2.31 3.07 3.40 3.97 4.32 5.44 D 1.72 1.72 1.78 2.07 2.18 2.72 3.12 3.27 E 3.85 3.85 3.85 4.75 4.75 5.50 7.75 7.75 (SUFFIX) -02-03-04-07-08-10-14-15-16-21-24-27-30-32-35-39-40-44-45-47-48-50-52-56-58-60-64-67-P01-T01- OPTION SIZES Stem Grounded 1/4" to 2" 1-1/4" CS Stem Extension 1/4" to 2" 2-1/4" CS Stem Extension 1/4" to 2" Steel Tee Handle 1/4" to 1-1/2" 90º Reversed Stem 1/4" to 2" SS Lever & Nut 1/4" to 2" Vented ball 1/4" to 2" Wheel Handle, Steel 1/4" to 1-1/2" Chain Lever - Vertical 1/4" to 2" UHMWPE Trim (non TFE) 1/4" to 2" Graphite Packing 1/4" to 2" SS Latch-Lock Lever & Nut 1/4" to 2" Cam-Lock & Grounded 1/4" to 2" SS Tee Handle & Nut 1/4" to 2" VTFE Trim 1/4" to 2" SS Hi-Rise Locking Round Handle, SS Nut 1/4" to 2" Cyl-Loc & Grounded 1/4" to 2" Seal Welded 1/4" to 2" Less Lever & Nut 1/4" to 2" SS Oval Latch-Lock Handle & Nut 1/4" to 2" SS Oval Handle (No Latch) & Nut (No Latch) & Nut 1/4" to 2" 2-1/4" CS Locking Stem Extension 1/4" to 2" Two Tack Welds 1/4" to 2" Multi-fill Seats 1/4" to 2" Chain Lever - Horizontal 1/4" to 2" Static Grounded Ball & Stem 1/4" to 2" 250# Steam Trim 1/4" to 2" Cleaned for Industrial Gas - CS Valves 1/4" to 2" BSPP (Parallel) Thread Conn. 1/4" to 2" BSPT (Tapered) Thread Conn. 1/4" to 2" For Pressure/Temperature Ratings, Refer to Page M-12, Graph No. 13 (1/4" to 1") Refer to Page M-11, Graph No. 11 (1-1/4" to 2") AAR Approval No. E999032 (when -52 is specified) Prev. Page | Next COPYRIGHT ©2003 CONBRACO IND., INC. – PRINTED IN U.S.A. 73-300 Series Carbon Steel Double Union End Ball Valve Threaded, 3000 psig WOG, Cold Non-Shock, 150 psig Saturated Steam. Vacuum Service to 29 inches Hg. Federal Specification: WW-V-35C, Type II, Composition: CS, Style: 1 MSS SP-110; Ball Valves Threaded, Socket-Welding, Solder Joint, Grooved and Flared Ends. FEATURES • Heavy duty quarter turn lever • RPTFE seats and seals • Steel barstock design • Easy installation and maintenance • Blow-out-proof stem design • Adjustable packing gland • Chromium plated ball • Nitride corrosion protection UL LISTINGS @ 250 PSIG MAX U® L • Guide YRPV: Gas shutoff valve for use with natural and manufactured gases. • Guide YSDT: LP gas shutoff valve. • Guide YRBX: Flammable liquid shutoff valve. Note: Listings apply ONLY to the standard -01 valves. LISTED STANDARD MATERIAL LIST 1. Lever and grip 2. Stem packing 3. Stem bearing 4. Ball 5. Tailpiece (2) 6. Retainer 7. Gland nut 8. Stem Steel, zinc plated w/vinyl RPTFE RPTFE A108-CS chrome plated A108-CS A108-CS A108-CS A108-CS chrome plated 9. Lever nut 10. Body 11. Seat (2) 12. Union nut (2) 13. Seat holder 14. Union seal (2) 15. Retainer seal Steel, zinc plated A108-CS RPTFE A108-CS A108-CS RPTFE RPTFE VARIATIONS AVAILABLE: 73-340 Series (316 SS Ball & Stem) OPTIONS AVAILABLE: CARBON STEEL DOUBLE UNION END BALL VALVE NUMBER SIZE 73-301-01 1/4" 73-302-01 3/8" 73-303-01 1/2" 73-304-01 3/4" 73-305-01 1" 73-306-01 1-1/4" 73-307-01 1-1/2" 73-308-01 2" Back A .43 .57 .62 .81 1.00 1.25 1.50 1.75 B 2.50 2.50 2.50 2.71 2.96 2.87 3.46 3.75 C 5.00 5.00 5.00 5.31 6.06 6.12 7.12 7.50 D 2.50 2.50 2.50 2.62 3.12 3.43 3.56 4.18 E 5.62 5.62 5.62 5.62 6.62 8.00 8.00 9.00 Wt. 3.51 3.45 3.35 4.48 7.04 9.96 14.83 20.50 (SUFFIX) -02-07-08-10-14-15-18-19-21-22-29-45-60-63-64-P01-T01- OPTION Stem Grounded Steel Tee Handle 90º Reversed Stem SS Lever & Nut Side Vented Ball (Uni-Directional) Wheel Handle, Steel Plain Yellow Grip Lock Plate UHMWPE Seats (Non-PTFE) Viton Union Seals Graphite Packing & Seals Less Lever & Nut Grounded Ball & Stem Threaded x Socket Weld 250# Steam Trim BSPP (Parallel) Thread Connection BSPT (Tapered) Thread Connection SIZES 1/4" to 2" 1/4" to 1-1/2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 1" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/2" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" For Pressure/Temperature Ratings, Refer to Page M-13, Graph No. 15 COPYRIGHT ©2003 CONBRACO IND., INC. – PRINTED IN U.S.A. Prev. Page | Next F-3 73-400 Series Carbon Steel Double Union End Socket Weld Ball Valve Socket Weld End, 3000 psig WOG, Cold Non-Shock, 150 psig Saturated Steam. Vacuum Service to 29 inches Hg. Federal Specification: WW-V-35C, Type II, Composition: CS, Style: 1 MSS SP-110; Ball Valves Threaded, Socket-Welding, Solder Joint, Grooved and Flared Ends. FEATURES • Heavy duty quarter turn lever • RPTFE seats and seals • Steel barstock design • Easy installation and maintenance • Blow-out-proof stem design • Adjustable packing gland • Chromium plated ball • Nitride corrosion protection UL LISTINGS @ 250 PSIG MAX U® L • Guide YRPV: Gas shutoff valve for use with natural and manufactured gases. • Guide YSDT: LP gas shutoff valve. • Guide YRBX: Flammable liquid shutoff valve. Note: Listings apply ONLY to the standard -01 valves. LISTED STANDARD MATERIAL LIST 1. Lever and grip 2. Stem packing 3. Stem bearing 4. Ball 5. Seat (2) 6. Retainer 7. Gland nut 8. Stem Steel, zinc plated w/vinyl RPTFE RPTFE A108-CS chrome plated RPTFE A108-CS A108-CS A108-CS chrome plated 9. Lever nut 10. Body 11. Tail piece (2) 12. Union nut (2) 13. Seat holder 14. Union seal (2) 15. Retainer seal Steel, zinc plated A108-CS A108-1018 A108-CS A108-CS RPTFE RPTFE VARIATIONS AVAILABLE: 73-440 Series (316 SS Ball & Stem) OPTIONS AVAILABLE: (SUFFIX) -02-07-08-10-14-15-18-19-21-22-29-45-60-64- OPTION Stem Grounded Steel Tee Handle 90º Reversed Stem SS Lever & Nut Side Vented Ball (Uni-Directional) Wheel Handle, Steel Plain Yellow Grip Lock Plate UHMWPE Trim (non-PTFE) Viton Union Seals Graphite Packing & Seals Less Lever & Nut Grounded Ball & Stem 250# Steam Trim SIZES 1/2" to 2" 1/2" to 1-1/2" 1/2" to 2" 1/2" to 2" 1/2" to 2" 1/2" to 1" 1/2" to 2" 1/2" to 2" 1/2" to 2" 1/2" to 2" 1/2" to 2" 1/2" to 2" 1/2" to 2" 1/2" to 2" CARBON STEEL DOUBLE UNION END SOCKET WELD BALL VALVE NUMBER SIZE 73-403-01 1/2" 73-404-01 3/4" 73-405-01 1" 73-406-01 1-1/4" 73-407-01 1-1/2" 73-408-01 2" F-4 Back A .62 .81 1.00 1.25 1.50 1.75 B 2.50 2.71 2.93 2.87 3.46 3.75 C 5.00 5.31 6.06 6.12 7.12 7.50 D 2.50 2.62 3.12 3.43 3.56 4.18 E 5.62 5.62 6.62 8.00 8.00 9.00 F .43 .56 .68 .81 .81 1.06 G Wt. .855 3.35 1.065 4.48 1.330 7.04 1.675 9.96 1.915 14.83 2.406 20.50 For Pressure/Temperature Ratings, Refer to Page M-13, Graph No. 15 COPYRIGHT ©2003 CONBRACO IND., INC. – PRINTED IN U.S.A. Prev. Page | Next 76-100 Series Stainless Steel Ball Valve Threaded, 1/4" to 1" 2000 psig WOG, 1-1/4" to 2" 1500 psig WOG, 2-1/2" to 3" 1000 psig WOG. (See referenced P/T chart) Cold Non-Shock. 150 psig Saturated Steam, Vacuum Service to 29 inches Hg. Federal Specification: WW-V-35C, Type: II, Composition: SS, Style: 3. MSS SP-110; Ball Valves Threaded, Socket-Welding, Solder Joint, Grooved and Flared Ends. FEATURES • Investment cast components • RPTFE seats and stuffing box ring • Mounting pad for easy actuator mounting • Blow-out-proof stem design • Adjustable packing gland • Meets NACE MR-01-75 • SS lever and nut • (-24) 1/4" to 2" Certified to API 607, 4th Edition, Class 600 burn STANDARD MATERIAL LIST 1. Lever and grip 2. Stem packing 3. Stem bearing 4. Ball 5. Seat (2) 6. Retainer 304 SS w/vinyl RPTFE RPTFE A276-316 RPTFE A276-316 (1/4" to 1") A351-CF8M (1-1/4" to 3") 7. Gland nut 8. Stem 9. Lever nut 10. Body seal (1-1/4" to 3") 11. Body A276-316 A276-316 18-8 SS PTFE A351-CF8M OPTIONS AVAILABLE: STAINLESS STEEL BALL VALVE NUMBER 76-101-01 SIZE 1/4" A .37 B 1.03 C 2.06 D 1.75 E 3.87 F .50 G 1.12 Wt. .58 76-102-01 76-103-01 76-104-01 76-105-01 76-106-01 76-107-01 76-108-01 76-109-01 76-100-01 3/8" 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3" .37 .50 .68 .87 1.00 1.25 1.50 2.50 2.50 1.03 1.12 1.50 1.68 2.00 2.18 2.75 3.37 3.37 2.06 2.25 3.00 3.37 4.00 4.37 5.50 6.75 6.75 1.75 1.81 2.12 2.25 2.62 3.05 3.24 4.12 4.12 3.87 3.87 4.87 4.87 5.50 8.00 8.00 8.00 8.00 .50 .50 .87 .87 .93 .93 .93 2.75 2.75 1.12 1.12 1.37 1.37 1.50 1.50 1.50 3.37 3.37 .54 .63 1.27 1.63 3.06 4.04 6.05 15.57 16.79 Back (SUFFIX) -02-03-04-07-08-14-15-16-19-21-24-27-30-32-35-39-40-44-45-46-47-48-49-50-57-58-60-64-P01-T01- OPTION SIZES Stem Grounded 1/4" to 3" 1-1/4" CS Stem Extension 1/4" to 3" 2-1/4" CS Stem Extension 1/4" to 3" Steel Tee Handle 1/4" to 2" 90º Reversed Stem 1/4" to 3" Side Vented Ball (Uni-Directional) 1/4" to 2" Wheel Handle, Steel 1/4" to 2" Chain Lever - Vertical 3/4" to 2" Lock Plate 1/4" to 2" UHMWPE Trim (Non-PTFE) 1/4" to 3" Graphite Packing 1/4" to 3" SS Latch-Lock Lever & Nut 1/4" to 3" Cam-Lock and Grounded 1/4" to 2" SS Tee Handle & Nut 1/4" to 2" VTFE Trim 1/4" to 3" SS Hi-Rise Locking Wheel Handle, SS Nut 1/4" to 2" Cyl-Loc and Grounded 1/4" to 2" Seal Welded 1/4" to 2" Less Lever & Nut 1/4" to 3" Latch Lock Lever - Lock in Closed Position Only 1/4" to 3" SS Latch Lock Oval Handle 1/4" to 1" SS Oval Handle (No Latch) & Nut 1/4" to 2" Assembled Dry 1/4" to 3" 2-1/4" CS Locking Stem Extension 1/4" to 3" Oxygen Cleaned 1/4" to 3" Chain Lever - Horizontal 3/4" to 2" Static Grounded Ball & Stem 1/4" to 3" 250# Steam Trim 1/4" to 3" BSPP (Parallel) Thread Connection 1/4" to 3" BSPT (Tapered) Thread Connection 1/4" to 3" For Pressure/Temperature Ratings, Refer to Page M-12, Graph No. 14 (1/4" to 1") Refer to Page M-11, Graph No. 12 (1-1/4" to 2") Refer to Page M-10, Graph No. 8 (2-1/2" to 3") COPYRIGHT ©2003 CONBRACO IND., INC. – PRINTED IN U.S.A. Prev. Page | Next A-9 76-300 Series Double Union End Stainless Steel Ball Valve Threaded, 1/2" to 1" 2000 psig WOG, 1-1/4" to 2" 1500 psig WOG. Cold Non-Shock. 150 psig Saturated Steam, Vacuum Service to 29 inches Hg. Federal Specification: WW-V-35C, Type: II, Composition: SS, Style: 1. MSS SP-110; Ball Valves Threaded, Socket-Welding, Solder Joint, Grooved and Flared Ends. FEATURES • Heavy duty quarter turn handles • RPTFE seats and seals • Blow-out-proof stem design • Adjustable packing gland STANDARD MATERIAL LIST 1. Lever and grip 2. Stem packing 3. Stem bearing 4. Ball 5. Seat (2) 6. Retainer 7. Gland nut 8. Stem 304 SS w/vinyl RPTFE RPTFE A276-316 RPTFE A276-316 A276-316 A276-316 9. Lever nut 10. Body 11. Tailpiece (2) 12. Union nut (2) 13. Seat holder 14. Union seal (2) 15. Retainer seal 18-8 SS A351-CF8M A276-316 Nitride A108-CS A276-316 RPTFE RPTFE OPTIONS AVAILABLE: (SUFFIX) -02-03-04-07-08-14-15-18-22-27-29-32-45-46-49-57-60-63-64-P01-T01- STAINLESS STEEL DOUBLE UNION END BALL VALVE NUMBER SIZE 76-303-01 1/2" 76-304-01 3/4" 76-305-01 1" 76-306-01 1-1/4" 76-307-01 1-1/2" 76-308-01 2" Back A .62 .81 1.00 1.25 1.50 1.75 B 2.27 2.46 2.89 2.88 3.43 3.75 C 4.33 4.51 5.45 5.32 6.43 6.87 D 2.12 2.31 2.75 2.97 3.39 4.12 E 4.87 4.87 5.50 5.50 7.87 9.87 Wt. 2.88 3.81 5.98 8.47 12.61 16.88 OPTION SIZES Stem Grounded 1/2" to 2" 1-1/4" CS Stem Extension 1/2" to 1-1/2" 2-1/4" CS Stem Extension 1/2" to 1-1/2" Steel Tee Handle 1/2" to 1-1/2" 90º Reversed Stem 1/2" to 2" Side Vented Ball (Uni-Directional) 1/2" to 2" Wheel Handle, Steel 1/2" to 1-1/2" Plain Yellow Grip 1/2" to 2" Viton Union Seals 1/2" to 2" SS Latch-Lock Lever & Nut 1/2" to 1-1/2" Graphite Packing & Seals 1/2" to 2" SS Tee Handle & Nut 1/2" to 1-1/2" Less Lever & Nut 1/2" to 2" Latch-Lock Lever - Lock in Closed Position Only1/2" to 1-1/2" Assembled Dry 1/2" to 2" Oxygen Cleaned 1/2" to 2" Grounded Ball & Stem 1/2" to 2" Threaded x Socket Weld 1/2" to 2" 250# Steam Trim 1/2" to 2" BSPP (Parallel) Thread Connection 1/2" to 2" BSPT (Tapered) Thread Connection 1/2" to 2" For Pressure/Temperature Ratings, Refer to Page M-12, Graph No. 14 (1/2" to 1") Refer to Page M-11, Graph No.12 (1-1/4" to 2") COPYRIGHT ©2003 CONBRACO IND., INC. – PRINTED IN U.S.A. Prev. Page | Next F-5 76-400 Series Stainless Steel Double Union End Socket Weld Ball Valve Socket Weld, 1/2" to 1" 2000 psig WOG, 1-1/4" to 2" 1500 psig WOG. Cold Non-Shock. 150 psig Saturated Steam, Vacuum Service to 29 inches Hg. Federal Specification: WW-V-35C, Type: II, Composition: SS, Style: 1. MSS SP-110; Ball Valves Threaded, Socket-Welding, Solder Joint, Grooved and Flared Ends. FEATURES • Heavy duty quarter turn handles • RPTFE seats and seals • Blow-out-proof stem design • Adjustable packing gland STANDARD MATERIAL LIST 1. Lever and grip 2. Stem packing 3. Stem bearing 4. Ball 5. Seat (2) 6. Retainer 7. Gland nut 8. Stem 304 SS w/vinyl RPTFE RPTFE A276-316 RPTFE A276-316 A276-316 A276-316 9. Lever nut 10. Body 11. Tailpiece (2) 12. Union nut (2) 13. Seat holder 14. Union seal (2) 15. Retainer seal 18-8 SS A351-CF8M A276-316 Nitride steel A276-316 RPTFE RPTFE OPTIONS AVAILABLE: (SUFFIX) -02-03-04-07-08-14-15-18-22-27-29-32-45-46-49-57-60-64- OPTION SIZES Stem Grounded 1/2" to 2" 1-1/4" CS Stem Extension 1/2" to 1-1/2" 2-1/4" CS Stem Extension 1/2" to 1-1/2" Steel Tee Handle 1/2" to 1-1/2" 90º Reversed Stem 1/2" to 2" Side Vented Ball (Uni-Directional) 1/2" to 2" Wheel Handle, Steel 1/2" to 1-1/2" Plain Yellow Grip 1/2" to 2" Viton Union Seals 1/2" to 2" SS Latch-Lock Lever & Nut 1/2" to 1-1/2" Graphite Packing & Seals 1/2" to 2" SS Tee Handle & Nut 1/2" to 2" Less Lever & Nut 1/2" to 2" Latch-Lock Lever - Lock in Closed Position Only1/2" to 1-1/2" Assembled Dry 1/2" to 2" Oxygen Cleaned 1/2" to 2" Grounded Ball & Stem 1/2" to 2" 250# Steam Trim 1/2" to 2" STAINLESS STEEL DOUBLE UNION END SOCKET WELD BALL VALVE NUMBER SIZE 76-403-01 1/2" 76-404-01 3/4" 76-405-01 1" 76-406-01 1-1/4" 76-407-01 1-1/2" 76-408-01 2" F-6 Back A .62 .81 1.00 1.25 1.50 1.75 B 2.27 2.46 2.89 2.88 3.43 3.75 C 4.33 4.51 5.45 5.32 6.43 6.87 D 2.12 2.31 2.75 2.97 3.39 4.12 E 4.87 4.87 5.50 5.50 7.87 9.87 F .43 .56 .68 .81 .87 1.06 G .855 1.065 1.330 1.675 1.915 2.406 Wt. 2.88 3.81 5.98 8.47 12.61 16.88 For Pressure/Temperature Ratings, Refer to Page M-12, Graph No. 14 (1/2" to 1") Refer to Page M-11, Graph No.12 (1-1/4" to 2") COPYRIGHT ©2003 CONBRACO IND., INC. – PRINTED IN U.S.A. Prev. Page | Next 83-500 Series Carbon Steel 3-Piece High Pressure Full Port Ball Valve Threaded, 1/4" to 1" 1500 psig WOG, 1-1/4" & 2" 1250 psig WOG, Cold Non-Shock. 150 psig Saturated Steam. Vacuum Service to 29 inches Hg. Federal Specification: WW-V-35C, Type: II, Composition: CS, Style: 1. MSS SP-110; Ball Valves Threaded, Socket-Welding, Solder Joint, Grooved and Flared Ends. FEATURES • Nitride corrosion protection • (-29) Certified to API standard 607, • Investment Cast Components • Adjustable packing gland 4th Edition, Class 600 burn • Actuator mounting pad (3/4" to 2") • In-line repairable • Meets NACE MR-01-75 with SS trim • RPTFE seats and seals • Blow-out-proof stem design STANDARD MATERIAL LIST 1. Lever and grip 2. Body bolt (4) 3. Hex nut (4) 4. Ball 5. Seat (2) 6. End cap (2) 7. Seat holder (2) CS, zinc plated w/vinyl Steel, SAE grade 8 zinc plated Steel, SAE grade 8 zinc plated A108-CS chrome plated RPTFE A216-WCB A108-CS 8. 9. 10. 11. 12. 13. 14. Gland nut Stem Lever nut Stem packing Stem bearing Body Body seal (2) A108-CS A108-CS Steel, zinc plated RPTFE RPTFE A216-WCB RPTFE VARIATIONS AVAILABLE: 83-540 Series (316 SS Ball & Stem) OPTIONS AVAILABLE: (SUFFIX) -02-03-04-07-08-10-14-16-18-27-29-32-38-45-47-48-56-58-59-60-63-64-P01-T01- CARBON STEEL 3-PIECE HIGH PRESSURE FULL PORT BALL VALVE NUMBER SIZE 83-501-01 1/4" 83-502-01 3/8" 83-503-01 1/2" 83-504-01A 3/4" 83-505-01A 1" 83-506-01A 1-1/4" 83-507-01A 1-1/2" 83-508-01A 2" Back A .43 .50 .62 .81 1.00 1.25 1.50 2.00 B 1.50 1.50 1.69 1.93 2.25 2.43 2.62 3.12 C 3.00 3.00 3.38 3.87 4.50 4.87 5.25 6.25 D 1.93 1.93 2.00 2.18 2.62 2.87 3.35 3.75 E 3.87 3.87 4.81 4.81 5.50 5.50 8.00 8.00 F N/A N/A N/A 1.25 1.62 1.62 1.62 1.62 G N/A N/A N/A 1/4-20 5/16-18 5/16-18 5/16-18 5/16-18 Wt. 1.21 1.22 1.90 2.56 3.78 5.24 7.67 15.60 OPTION Static Grounded 1-1/4" Stem Extension 2-1/4" Stem Extension Tee Handle 90º Reversed Stem SS Lever & Nut Vented Ball (see page J-2) Vertical Chain Lever Plain Yellow Grip Latch Lock Lever Firesafe SS Tee Handle & Nut PEEK Seats & Bearing (Graphite Packing & Seals) Less Lever & Nut SS Latch-Lock Oval Handle SS Oval Handle (No Latch) & Nut Multifill Seats Chain Lever - Horizontal SS External Trim - 3-pc. Valves Grounded Ball & Stem Female Threaded x Socket Weld 250# Steam Trim BSPP (Parallel) Thread Connection BSPT (Tapered) Thread Connection SIZES 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/2" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/2" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" For Pressure/Temperature Ratings, Refer to Page M-12, Graph No. 11 COPYRIGHT ©2003 CONBRACO IND., INC. – PRINTED IN U.S.A. Prev. Page | Next B-15 86-500 Series Stainless Steel 3-Piece High Pressure Full Port Ball Valve Threaded, 1/4" to 1" 1500 psig WOG, 1-1/4" & 2" 1250 psig WOG, Cold Non-Shock. 150 psig Saturated Steam. Vacuum Service to 29 inches Hg. Federal Specification: WW-V-35C, Type: II, Composition: SS, Style: 1. MSS SP-110; Ball Valves Threaded, Socket-Welding, Solder Joint, Grooved and Flared Ends. FEATURES • Adjustable packing gland • (-29) Certified to API standard 607, • In-line repairable 4th Edition, Class 600 burn • Blow-out-proof stem design • Meets NACE MR-01-75 • Investment Cast Components • Actuator mounting pad (3/4" to 2") • RPTFE seats and seals STANDARD MATERIAL LIST 1. Lever and grip 2. Stem packing 3. Stem bearing 4. Ball 5. Seat (2) 6. End cap (2) 7. Seat holder (2) 304 SS w/vinyl RPTFE RPTFE A276-316 RPTFE A351-CF3M A276-316 8. Gland nut 9. Stem 10. Lever nut 11. Body bolt (4) 12. Hex nut (4) 13. Body 14. Body seal (2) A276-316 A276-316 304 SS 18-8 SS 18-8 SS A351-CF8M RPTFE OPTIONS AVAILABLE: (SUFFIX) -02-03-04-07-08-14-15-16-18-27-29-32-38-45-47-48-49-56-57-58-60-63-64-66-P01-T01- OPTION Static Grounded 1-1/4" Stem Extension 2-1/4" Stem Extension Tee Handle 90º Reversed Stem Vented Ball (see page J-2) Round Handle Vertical Chain Lever Plain Yellow Grip Latch Lock Lever Firesafe SS Tee Handle & Nut PEEK Seats & Bearing (Graphite Packing & Seals) Less Lever & Nut SS Latch-Lock Oval Handle SS Oval Handle (No Latch) & Nut Assembled Dry Multifull Seats Oxygen Cleaned Chain Lever - Horizontal Grounded Ball & Stem Threaded x Socket Weld 250# Steam Trim FNPT x Butt Weld BSPP (Parallel) Thread Connection BSPT (Tapered) Thread Connection SIZES 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/2" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/2" to 2" 1/4" to 2" 1/2" to 2" 1/4" to 2" 1/2" to 2" 1/4" to 2" 1/4" to 2" STAINLESS STEEL 3-PIECE HIGH PRESSURE FULL PORT BALL VALVE NUMBER SIZE 86-501-01 1/4" 86-502-01 3/8" 86-503-01 1/2" 86-504-01A 3/4" 86-505-01A 1" 86-506-01A 1-1/4" 86-507-01A 1-1/2" 86-508-01A 2" Back A .43 .50 .62 .81 1.00 1.25 1.50 2.00 B 1.50 1.50 1.69 1.93 2.25 2.43 2.62 3.12 C 3.00 3.00 3.38 3.87 4.50 4.87 5.25 6.25 D 1.93 1.93 2.00 2.18 2.62 2.87 3.35 3.75 E 3.87 3.87 4.81 4.81 5.50 5.50 8.00 8.00 F N/A N/A N/A 1.25 1.62 1.62 1.62 1.62 G N/A N/A N/A 1/4-20 5/16-18 5/16-18 5/16-18 5/16-18 Wt. 1.23 1.18 1.62 2.27 3.54 6.00 8.84 15.28 For Pressure/Temperature Ratings, Refer to Page M-11, Graph No. 12 COPYRIGHT ©2003 CONBRACO IND., INC. – PRINTED IN U.S.A. Prev. Page | Next B-19 77-200 Series Bronze Full Port Solder End Ball Valve Solder End, 600 psig WOG, Cold Non-Shock. 150 psig Saturated Steam. (See referenced P/T chart) Vacuum Service to 29 inches Hg. Federal Specification: WW-V-35C, Type: II, Composition: BZ, Style: 3. MSS SP-110; Ball Valves Threaded, Socket-Welding, Solder Joint, Grooved and Flared Ends. FEATURES • Chromium plated ball • RPTFE seats and stuffing box ring • Full port for full flow & min. pressure drop • Blow-out-proof stem design • Adjustable packing gland STANDARD MATERIAL LIST 1. Lever and grip 2. Stem packing 3. Stem bearing 4. Ball 5. Seat (2) 6. Retainer Steel, zinc plated w/vinyl RPTFE RPTFE B16 chrome plated RPTFE B16 (3/4" to 1") B584-C84400 (1-1/4" to 2-1/2") VARIATIONS AVAILABLE: 77-240 Series (316 SS Ball & Stem) 77-250 Series (Balancing Stop) The 77-200 is designed to be soft soldered into lines without disassembly. This allows a tested valve to be installed without disturbing the seats and seals in any way. Soldering temperature not to exceed 500ºF. 7. Gland nut 8. Stem 9. Lever nut 10. Body seal (1-1/4" to 2-1/2") 11. Body B16 B16 Steel, zinc plated PTFE B584-C84400 OPTIONS AVAILABLE: (SUFFIX) -02-03-04-05-07-08-10-14-15-16-17-20-24-27-30-32-35-40-45-46-47-48-49-50-56-57-58-60-63- OPTION Stem Grounded 1-1/4" CS Stem Extension 2-1/4" CS Stem Extension Plain Ball Steel Tee Handle 90º Reversed Stem SS Lever & Nut Side Vented Ball (Uni-Directional) Wheel Handle, Steel Chain Lever - Vertical Rough Chrome Plated - Bronze Valves Slot Vented Ball Graphite Packing SS Latch-Lock Lever & Nut Cam-Lock and Grounded SS Tee Handle & Nut VTFE Trim Cyl-Loc and Grounded Less Lever & Nut Latch Lock Lever - Lock in Closed Position Only SS Oval Latch-Lock Handle & Nut SS Oval Handle (No Latch) & Nut Assembled Dry 2-1/4" CS Locking Stem Extension Multifill Seats & Packing Oxygen Cleaned Chain Lever - Horizontal Static Grounded Ball & Stem NPT x Solder/Socket Weld SIZES 3/4" to 2-1/2" 3/4" to 2-1/2" 3/4" to 2-1/2" 3/4" to 2-1/2" 3/4" to 1-1/4" 3/4" to 2-1/2" 3/4" to 2-1/2" 3/4" to 2-1/2" 3/4" to 1-1/4" 3/4" to 2-1/2" 3/4" to 2-1/2" 3/4" to 2-1/2" 3/4" to 2-1/2" 3/4" to 2-1/2" 3/4" to 1-1/4" 3/4" to 1-1/4" 3/4" to 2-1/2" 3/4" to 1-1/4" 3/4" to 2-1/2" 3/4" to 2-1/2" 3/4" ONLY 3/4" to 2-1/2" 3/4" to 2-1/2" 3/4" to 2-1/2" 3/4" to 2-1/2" 3/4" to 2-1/2" 3/4" to 2-1/2" 3/4" to 2-1/2" 3/4" to 2-1/2" BRONZE FULL PORT SOLDER END BALL VALVE NUMBER 77-204-01 77-205-01 77-206-01 77-207-01 77-208-01 77-209-01 A-16 SIZE 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" Back A .81 1.00 1.25 1.50 2.00 2.50 B 2.12 2.33 2.60 3.00 3.62 3.93 C 4.12 4.64 5.15 6.00 7.24 7.87 D 2.12 2.62 2.87 3.34 3.71 4.12 E 4.87 5.50 5.50 8.00 8.00 8.00 F G .878 .75 1.129 .90 1.378 .96 1.629 1.09 2.129 1.34 2.630 1.48 Wt. 1.65 2.99 4.55 6.04 10.58 15.53 For Pressure/Temperature Ratings, Refer to Page M-8, Graph No. 4 COPYRIGHT ©2003 CONBRACO IND., INC. – PRINTED IN U.S.A. Prev. Page | Next SECTION H CONTENTS SPECIALTY BALL VALVES DESCRIPTION PAGE 7A-130-26 Series, Threaded Dry Chlorine Carbon Steel with Ni-Cu Ball & Stem H-1 7B-100 Series, Threaded Full Port Bronze H-2 7B-300 Series, Threaded Full Port Bronze H-3 7B-800 Series, M x F Threaded Full Port Bronze H-4 7H-800 Series, M x F Threaded Full Port Stainless Steel H-5 7K-100 Series, Threaded Full Port Bronze with Drain H-6 71-500 Series, Threaded Bronze Spring Return Handle H-7 74-100 Series, Threaded Chemical Resistant Nickel H-8 75-100 Series, Threaded Bronze Pad Locking Valve H-9 76-500 Series, Threaded Stainless Steel Spring Return Handle H-10 78-100 Series, Threaded Bronze with Dust Cover and Chain H-11 78-124 &-125, Threaded Bronze 5-Port Fuel Selector H-12 78-200 Series, Solder End Bronze with Dust Cover and Chain H-13 78-200 Series, Threaded Bronze Surface Mount H-14 78-257/267 Series, M x F Threaded Brass and Bronze Instrumentation H-15 78-621/625 Series, Threaded Bronze Irrigation H-16 78-664/962 Series, Threaded Bronze with Center Drain H-17 78-668, 3/4" Solder End Bronze Purge and Drain H-18 89-500 Series, Threaded Carbon Steel Spring Return Handle H-19 95-100 Series, Threaded Full Port Bronze Stop and Drain H-20 95-200 Series, Solder End Full Port Bronze Stop and Drain H-21 82-200 Series, Male Brazed Extensions H-22 82-200 Series, Female Brazed Extensions H-23 70-200 Series, Bronze Standard Port with 6'' Brazed Extensions H-24 77-200 Series, Bronze Full Port with 6'' Brazed Extensions H-25 Back UL Listed and CSA Ball Valves - continued on next pagePrev. Page | Next UL Listed Ball Valves DESCRIPTION PAGE 73-300 Series, Carbon Steel Double Union End Ball Valve H-26 73-400 Series, Socket Weld, Carbon Steel, Double Union End H-27 79-700 Series, Solder End Brass Full Port Refrigerant H-28 80-100 Series, Threaded Bronze Gas Shut-Off H-29 81-100 Series, Threaded Bronze Gas Shut-Off H-30 90-100 Series, Threaded Bronze Unibody, Saturn H-31 489-100 Series, Threaded Cast Carbon Steel H-32 87A/88A Series, ANSI 150 & 300 Flanged D-A Back Prev. Page | Next 7A-130-26 Series Carbon Steel Dry Chlorine Ball Valve With Ni-Cu Ball and Stem Threaded. 400 psig WOG, Cold Non-Shock. For Use With Dry Chlorine Gas and Dry Liquid. Federal Specification: WW-V-35C, Type: II, Composition: CS, Style: 3. Complies With Recommendations of Chlorine Institute Pamphlet No. 6. MSS SP-110; Ball Valves Threaded, Socket-Welding, Solder Joint, Grooved and Flared Ends. FEATURES • Chevron style stem packing • Ni-Cu ball and stem • Investment Cast Parts • Nitride corrosion protection • Blow-out-proof stem design • Bolted, adjustable packing gland • Vented ball STANDARD MATERIAL LIST 1. Lever and grip 2. Bolt (2) 3. Gland plate 4. Packing set 5. Body 6. Seats (2) 7. Ball 304 SS w/vinyl 18-8 SS 304 SS PTFE, Chevron style A216-WCB RPTFE B164 8. Retainer 9. Body seal 10. Stem bearing 11. Stem 12. Packing gland 13. Lever nut A216-WCB RPTFE RPTFE B164 A276-316 18-8 SS CARBON STEEL DRY CHLORINE BALL VALVE WITH Ni-Cu BALL AND STEM NUMBER 7A-131-26 7A-132-26 7A-133-26 7A-134-26 7A-135-26 7A-136-26 7A-137-26 7A-138-26 SIZE 1/4" 3/8" 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" Back A .43 .50 .50 .68 .87 1.00 1.25 1.50 B 1.56 1.56 1.56 2.00 2.37 2.24 2.65 3.25 C 2.75 2.75 2.75 3.50 4.12 4.24 5.13 6.00 D 1.93 1.93 1.93 2.31 2.43 3.00 3.38 3.67 E 3.87 3.87 3.87 4.87 4.87 5.50 8.00 8.00 Wt. 1.25 1.21 1.14 2.11 2.94 4.40 7.04 10.86 For Pressure/Temperature Ratings, Refer to Page M-14, Graph No. 17 COPYRIGHT ©2003 CONBRACO IND., INC. – PRINTED IN U.S.A. Prev. Page | Next H-1 7B-100 Series Bronze Full Port Hydro Ball Valve Threaded, 400 psig WOG, Cold Non-Shock. 125 psig Saturated Steam. Vacuum Service to 29 inches Hg. Federal Specification: WW-V-35C, Type: II, Composition: BZ, Style: 3. MSS SP-110; Ball Valves Threaded, Socket-Welding, Solder Joint, Grooved and Flared Ends. FEATURES • Chromium plated ball • RPTFE packing • PTFE seats • Blow-out-proof stem design • Adjustable packing gland STANDARD MATERIAL LIST 1. T-handle & grip 2. Stem packing 3. Stem 4. Ball 5. Seat (2) SS w/vinyl RPTFE B16 B16, Chrome plated PTFE 6. Gland nut 7. Lever nut 8. Retainer 9. Body 10. Bearing B16 304 SS B16 B584-C84400 RPTFE 1/4" to 1/2" OPTIONS AVAILABLE: (SUFFIX) -31- OPTION 7B Series w/Boss NOT Drilled & Tapped SIZES 1/4" to 2" BRONZE FULL PORT HYDRO BALL VALVE NUMBER 7B-101-01 7B-102-01 7B-103-01 7B-104-01 7B-105-01 7B-106-01 7B-107-01 7B-108-01 H-2 SIZE 1/4" 3/8" 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" Back A .37 .37 .50 .75 1.00 1.25 1.50 2.00 B 1.03 1.03 1.09 1.28 1.66 1.87 2.05 2.47 C 2.06 2.06 2.18 2.68 3.43 3.87 4.22 5.02 D 1.37 1.37 1.43 1.62 1.90 2.18 2.60 2.95 E 2.68 2.68 2.68 3.00 4.00 4.00 5.62 5.62 F .93 .93 1.00 1.12 1.31 1.62 1.81 2.18 G .53 .53 .53 .75 .94 1.15 1.31 1.68 H 1/8 NPT 1/8 NPT 1/8 NPT 1/8 NPT 1/8 NPT 1/4 NPT 1/4 NPT 1/4 NPT Wt. .61 .57 .64 .80 1.61 2.60 3.85 6.57 For Pressure/Temperature Ratings, Refer to Page M-8, Graph No. 3 COPYRIGHT ©2003 CONBRACO IND., INC. – PRINTED IN U.S.A. Prev. Page | Next 7B-300 Series Single Union End Bronze Full Port Hydro Ball Valve NPT Threaded, 400 psig WOG, Cold Non-Shock. 125 psig Saturated Steam. Vacuum Service to 29 inches Hg. Federal Specification: WW-V-35C, Type: II, Composition: BZ, Style: 3. MSS SP-110; Ball Valves Threaded, Socket-Welding, Solder Joint, Grooved and Flared Ends. FEATURES • Chromium plated ball • RPTFE packing • PTFE seats • Blow-out-proof stem design • Adjustable packing gland STANDARD MATERIAL LIST 1. T-handle & grip 2. Stem packing 3. Stem 4. Ball 5. Seat (2) 6. Gland nut SS w/vinyl RPTFE B16 B16, chrome plated PTFE B16 7. Lever nut 8. Retainer 9. Body 10. O-Ring 11. Tailpiece 12. Union nut 304 SS B16 B584-C84400 Fluorocarbon B16 B16 (1/4" to 1") B584-C84400 (1-1/4" & 2") OPTIONS AVAILABLE: (SUFFIX) -31- OPTION 7B Series w/Boss NOT Drilled & Tapped SIZES 1/4" to 2" SINGLE UNION END BRONZE FULL PORT HYDRO BALL VALVE NUMBER 7B-301-01 7B-303-01 7B-304-01 7B-305-01 7B-306-01 7B-307-01 7B-308-01 SIZE 1/4" 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" Back A .37 .50 .75 1.00 1.25 1.50 2.00 B 2.13 2.21 2.25 2.71 3.00 3.43 4.00 C 2.92 3.08 3.67 4.50 5.00 5.62 6.56 D 1.37 1.43 1.62 1.90 2.18 2.60 2.95 E 2.68 2.68 3.00 4.00 4.00 5.62 5.62 F .93 .93 1.12 1.31 1.62 1.81 2.18 G .53 .53 .75 .94 1.15 1.31 1.68 H 1/8 NPT 1/8 NPT 1/8 NPT 1/8 NPT 1/4 NPT 1/4 NPT 1/4 NPT Wt. .89 1.00 1.32 2.31 3.68 5.50 9.30 For Pressure/Temperature Ratings, Refer to Page M-8, Graph No. 3 COPYRIGHT ©2003 CONBRACO IND., INC. – PRINTED IN U.S.A. Prev. Page | Next H-3 7B-800 Series Male x Female Bronze Full Port Hydro Ball Valve Male x Female Threaded, 400 psig WOG, Cold Non-Shock, 125 psig Saturated Steam. Vacuum Service to 29 inches Hg. Federal Specification: WW-V-35C, Type: II, Composition: BZ, Style: 3. MSS SP-110; Ball Valves Threaded, Socket-Welding, Solder Joint, Grooved and Flared Ends. FEATURES • Chromium plated ball • RPTFE packing • PTFE seats • Blow-out-proof stem design • Adjustable packing gland STANDARD MATERIAL LIST 1. T-handle & grip 2. Stem packing 3. Stem bearing 4. Ball 5. Seat (2) SS RPTFE RPTFE B16, chrome plated PTFE 6. Stem 7. Gland screw 8. Lever nut 9. Retainer 10. Body B16 B16 304 SS B16 B584-C84400 OPTIONS AVAILABLE: (SUFFIX) -31- OPTION 7B Series w/Boss NOT Drilled & Tapped SIZES 1/4" to 2" MALE x FEMALE BRONZE FULL PORT HYDRO BALL VALVE NUMBER 7B-801-01 7B-802-01 7B-803-01 7B-804-01 7B-805-01 7B-806-01 7B-807-01 7B-808-01 H-4 SIZE 1/4" 3/8" 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" Back A .37 .37 .50 .75 1.00 1.25 1.50 2.00 B 1.40 1.46 1.68 1.88 2.39 2.66 2.86 3.34 C 2.43 2.50 2.78 3.28 4.17 4.66 5.03 5.89 D 1.37 1.37 1.43 1.70 1.93 2.13 2.71 3.06 E 2.56 2.56 2.56 2.68 3.62 3.62 5.12 5.12 F .93 .93 1.00 1.12 1.31 1.62 1.81 2.18 G .53 .53 .53 .75 .94 1.15 1.31 1.68 H 1/8 NPT 1/8 NPT 1/8 NPT 1/8 NPT 1/8 NPT 1/4 NPT 1/4 NPT 1/4 NPT Wt. .73 .70 .82 .80 1.61 2.60 3.85 6.57 For Pressure/Temperature Ratings, Refer to Page M-8, Graph No. 3 COPYRIGHT ©2003 CONBRACO IND., INC. – PRINTED IN U.S.A. Prev. Page | Next 7H-800 Series M x F Stainless Steel Full Port Hydro Ball Valve Male x Female Threaded, 800 psig WOG, Cold Non-Shock, 125 psig Saturated Steam. Vacuum Service to 29 inches Hg. Federal Specification: WW-V-35C, Type: II, Composition: SS, Style: 3. MSS SP-110; Ball Valves Threaded, Socket-Welding, Solder Joint, Grooved and Flared Ends. FEATURES • 316 SS ball & stem • RPTFE packing • PTFE seats • Blow-out-proof stem design • Adjustable packing gland STANDARD MATERIAL LIST 1. T-handle & grip 2. Stem packing 3. Stem bearing 4. Ball 5. Seat (2) SS RPTFE RPTFE A276-316 PTFE 6. Stem 7. Gland screw 8. Lever nut 9. Retainer 10. Body A276-316 A276-316 304 SS A276-316 A351-CF8M OPTIONS AVAILABLE: (SUFFIX) -31- OPTION 7B Series w/Boss NOT Drilled & Tapped SIZES 1/4" to 1" MALE X FEMALE STAINLESS STEEL FULL PORT HYDRO BALL VALVE NUMBER 7H-801-01 7H-802-01 7H-803-01 7H-804-01 7H-805-01 SIZE 1/4" 3/8" 1/2" 3/4" 1" Back A .37 .37 .50 .75 1.00 B 1.47 1.55 1.79 2.01 2.39 C 2.46 2.54 2.83 3.42 4.17 D 1.39 1.39 1.45 2.08 2.38 E 2.56 2.56 2.56 3.25 3.93 F .93 .93 1.00 1.01 1.12 G .53 .53 .53 .75 .94 H 1/8 NPT 1/8 NPT 1/8 NPT 1/8 NPT 1/8 NPT Wt. .65 .62 .73 .86 1.65 For Pressure/Temperature Ratings, Refer to Page M-16, Graph No. 21 COPYRIGHT ©2003 CONBRACO IND., INC. – PRINTED IN U.S.A. Prev. Page | Next H-5 7K-100 Series Bronze Full Port Ball Valve with Drain NPT Threaded with NPT threaded drain port. Recommended for water or air services. Rated +50˚F to 200˚F, 0-125 psig. FEATURES • Chromium plated ball • RPTFE seats and stuffing box ring • Mounting pad for easy actuator mounting (3/4" to 2-1/2") • Blow-out-proof stem design • Adjustable packing gland • Full port for full flow & min. pressure drop • Auto-drain / Auto-vent STANDARD MATERIAL LIST 1. Lever and grip 2. Stem packing 3. Stem bearing 4. Ball 5. Seat (2) 6. Retainer Steel, zinc plated w/vinyl RPTFE RPTFE Brass, chrome plated RPTFE B16 (1/4" to 1") B584-C84400 (1-1/4" to 2-1/2") 7. Gland nut 8. Stem 9. Lever nut 10. Body seal 11. Body B16 B16 Steel, zinc plated PTFE (1-1/4" to 2-1/2") B584-C84400 OPTIONS AVAILABLE: (SUFFIX) -02-03-04-07-08-10-15-16-17-18-24-27-30-32-35-40-45-46-47-48-49-50-56-57-58-60-61-63- OPTION Stem Grounded 1-1/4" CS Stem Extension 2-1/4" CS Stem Extension Steel Tee Handle 90º Reversed Stem SS Lever & Nut Wheel Handle, Steel Chain Lever - Vertical Rough Chrome Plated - Bronze Valves Plain Yellow Grip Graphite Packing SS Latch-Lock Lever & Nut Cam-Lock and Grounded SS Tee Handle & Nut VTFE Trim Cyl-Loc and Grounded Less Lever & Nut Latch-Lock Lever - Lock in Closed Position Only SS Latch-Lock Oval Handle & Nut SS Oval Handle (No Latch) & Nut Assembled Dry 2-1/4" CS Locking Stem Extension Multifill Seats & Packing Oxygen Cleaned Chain Lever - Horizontal Grounded Ball & Stem Grounded Ball & Stem, Assembled Dry NPT x Solder/Socket Weld SIZES 1/4" to 2-1/2" 1/4" to 2-1/2" 1/4" to 2-1/2" 1/4" to 1-1/4" 1/4" to 2-1/2" 1/4" to 2-1/2" 1/4" to 1-1/4" 3/4" to 2-1/2" 1/4" to 2-1/2" 1/4" to 2-1/2" 1/4" to 2-1/2" 1/4" to 2-1/2" 1/4" to 1-1/4" 1/4" to 1-1/4" 1/4" to 2-1/2" 1/4" to 1-1/4" 1/4" to 2-1/2" 1/4" to 2-1/2" 1/4" to 3/4" 1/4" to 2" 1/4" to 2-1/2" 1/4" to 2-1/2" 1/4" to 2-1/2" 1/4" to 2-1/2" 3/4" to 2-1/2" 1/4" to 2-1/2" 1/4" to 2-1/2" 1/4" to 2-1/2" BRONZE FULL PORT BALL VALVE WITH DRAIN NUMBER SIZE A 7K-101-01 1/4" .37 7K-102-01 3/8" .37 7K-103-01 1/2" .50 7K-104-01 3/4" .81 7K-105-01 1" 1.00 7K-106-01 1-1/4" 1.25 7K-107-01 1-1/2" 1.50 7K-108-01 2" 2.00 7K-109-01 2-1/2" 2.50 H-6 Back B 1.03 1.03 1.10 1.56 1.80 2.12 2.37 2.70 3.25 C 2.06 2.06 2.19 3.12 3.61 4.25 4.74 5.38 6.50 D 1.75 1.75 1.75 2.12 2.62 2.87 3.30 3.71 4.05 E 3.87 3.87 3.87 4.78 5.50 5.50 7.78 7.78 7.78 F N/A N/A N/A .87 .93 .93 2.08 2.41 2.75 G H N/A .09 N/A .09 N/A .12 1.37 .29 1.50 .31 1.50 .37 3.06 .50 3.52 .62 3.37 1.09 I .53 .53 .59 .90 1.12 1.37 1.56 2.03 2.34 J 1.18 1.18 1.25 1.56 1.78 2.03 2.21 2.68 3.00 K Wt. N/A .70 N/A .66 N/A .73 .90 1.93 1.12 3.42 1.37 5.15 1.28 6.81 1.56 11.85 2.00 17.35 COPYRIGHT ©2003 CONBRACO IND., INC. – PRINTED IN U.S.A. Prev. Page | Next 71-500 Series Bronze Ball Valve with Spring Return Handle Threaded, 600 psig WOG, Cold Non-Shock. 150 psig Saturated Steam. Vacuum Service to 29 inches Hg. Federal Specification: WW-V-35C, Type: II, Composition: BZ Style: 3. MSS SP-110; Ball Valves Threaded, Socket-Welding, Solder Joint, Grooved and Flared Ends. FEATURES • Spring return to close (-01) • Blow-out-proof stem design • Spring return to open (-08) • Adjustable packing gland • All components of lever are SS • Chromium plated ball • Operating torque is approximately three times standard valve torque • RPTFE seats and stuffing box ring STANDARD MATERIAL LIST 1. Handle 2. Stem packing 3. Stem bearing 4. Ball 5. Seat (2) SS w/vinyl Multifill PTFE RPTFE B16, chrome plated Multifill PTFE 6. Retainer 7. Gland nut 8. Stem 9. Lever nut 10. Body seal 11. Body B16 (1/4" to 1") B584-C84400 (1-1/4" to 2") B16 A276-316 Steel, zinc plated PTFE (1-1/4" to 2") B584-C84400 VARIATIONS AVAILABLE: 71-540 Series 71-590 Series (316 SS Ball & Stem) (Pinned Retainer) OPTIONS AVAILABLE: (SUFFIX) -08-14-20-21-24-35-49-57-P01-T01- OPTION 90º Reversed Stem Side Vented Ball (Uni-Directional) Slot Vented Ball UHMWPE Seats (Non-PTFE) Graphite Stem Packing PTFE Trim Assembled Dry Oxygen Cleaned BSPP (Parallel) Thread Connection BSPT (Tapered) Thread Connection SIZES 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" BRONZE BALL VALVE WITH SPRING RETURN HANDLE NUMBER 71-501-01 71-502-01 71-503-01 71-504-01 71-505-01 71-506-01 71-507-01 71-508-01 SIZE 1/4" 3/8" 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" Back A .43 .50 .50 .68 .87 1.00 1.25 1.50 B 1.12 1.12 1.12 1.50 1.68 2.00 2.18 2.34 C 2.25 2.25 2.25 3.00 3.37 4.00 4.37 4.68 D 7.00 7.00 7.00 7.00 7.00 9.00 9.00 9.00 Wt. 1.47 1.45 1.35 2.33 2.59 4.18 5.31 6.41 For Pressure/Temperature Ratings, Refer to Page M-8, Graph No. 4 COPYRIGHT ©2003 CONBRACO IND., INC. – PRINTED IN U.S.A. Prev. Page | Next H-7 74-100 Series Chemical Resistant Nickel Ball Valve Threaded, 800 psig WOG, Cold Non-Shock. 150 psig Saturated Steam. Vacuum Service to 29 inches Hg. FEATURES • Investment cast components • RPTFE seats and stuffing box ring • SS lever and nut • Blow-out-proof stem design • Adjustable packing gland • (-24) Certified to API 607 4th Edition STANDARD MATERIAL LIST 1. Lever and grip 2. Stem packing 3. Stem bearing 4. Ball 5. Seat (2) 6. Retainer 304 SS w/vinyl 7. Gland nut RPTFE 8. Stem RPTFE 9. Lever nut Nickel 200, ASTM-B162 10. Body seal RPTFE 11. Body Nickel 200, ASTM-B160 (1/2" to 1") Nickel CZ100, ASTM-A494 (1-1/2" to 2") A276-316 Nickel 200, ASTM-B160 18-8 SS PTFE (1-1/2" & 2") Nickel CZ100, ASTM-A494 OPTIONS AVAILABLE: (SUFFIX) -02-03-04-07-14-15-16-18-21-24-27-30-32-35-45-46-48-49-50-56-58-60-P01-T01- OPTION Stem Grounded 1-1/4" CS Stem Extension 2-1/4" CS Stem Extension Steel Tee Handle Side Vented Ball (Uni-Directional) Wheel Handle, Steel Chain Lever - Vertical Plain Yellow Grip UHMWPE Seats (Non-PTFE) Graphite Packing SS Latch-Lock Lever & Nut Cam-Lock and Grounded SS Tee Handle & Nut VTFE Trim Less Lever & Nut Latch Lock Lever - Lock Close Only SS Oval Handle (No Latch) & Nut Assembled Dry 2-1/4" CS Locking Stem Extension Multifill Seats & Packing Chain Lever - Horizontal Grounded Ball & Stem BSPP (Parallel) Thread Connection BSPT (Tapered) Thread Connection SIZES 1/2" to 2" 1/2" to 2" 1/2" to 2" 1/2" to 2" 1/2" to 2" 1/2" to 2" 3/4" to 2" 1/2" to 2" 1/2" to 2" 1/2" to 2" 1/2" to 2" 1/2" to 2" 1/2" to 2" 1/2" to 2" 1/2" to 2" 1/2" to 2" 1/2" to 2" 1/2" to 2" 1/2" to 2" 1/2" to 2" 3/4" to 2" 1/2" to 2" 1/2" to 2" 1/2" to 2" CHEMICAL RESISTANT NICKEL BALL VALVE NUMBER 74-103-01 74-104-01 74-105-01 74-107-01 74-108-01 H-8 SIZE 1/2" 3/4" 1" 1-1/2" 2" Back A .50 .68 .87 1.25 1.50 B 1.12 1.50 1.68 2.18 2.34 C 2.25 3.00 3.37 4.37 4.68 D 1.75 2.12 2.25 3.06 3.25 E 3.87 4.87 4.87 8.00 8.00 Wt. .58 1.18 1.57 4.11 6.02 For Pressure/Temperature Ratings, Refer to Page M-16, Graph No. 22 COPYRIGHT ©2003 CONBRACO IND., INC. – PRINTED IN U.S.A. Prev. Page | Next 75-100 Series Bronze Pad Locking Ball Valve Threaded, 600 psig WOG, Cold Non-Shock. 150 psig Saturated Steam. Vacuum Service to 29 inches Hg. Federal Specification: WW-V-35C, Type: II, Composition: BZ, Style: 3. MSS SP-110; Ball Valves Threaded, Socket-Welding, Solder Joint, Grooved and Flared Ends. FEATURES • Chromium plated ball • Blow-out-proof stem design • RPTFE seats and stuffing box ring • Adjustable packing gland • May be padlocked in open or closed position with no change of hardware STANDARD MATERIAL LIST 1. Lever and grip 2. Stem packing 3. Stem bearing 4. Ball 5. Seat (2) 6. Retainer Steel, zinc plated w/vinyl RPTFE RPTFE B16, chrome plated RPTFE B16 (1/4" to 1") B584-C84400 (1-1/4" to 2") 7. Gland nut 8. Stem 9. Lever nut 10. Body seal 11. Body B16 B16 Steel, zinc plated PTFE (1-1/4" & 2") B584-C84400 VARIATIONS AVAILABLE: 75-140 Series 75-190 Series (316 SS Ball & Stem) (Pinned Retainer) OPTIONS AVAILABLE: (SUFFIX) -02-05-08-10-14-17-18-20-24-41-49-57-60-P01-T01- OPTION Stem Grounded Plain Ball 90º Reversed Stem SS Lever & Nut Side Vented Ball (Uni-Directional) Rough Chrome Plated - Bronze Valves Plain Yellow Grip Slot Vented Ball Graphite Packing Automatic Drain see page J-8 Assembled Dry Oxygen Cleaned Grounded Ball & Stem BSPP (Parallel) Thread Connection BSPT (Tapered) Thread Connection SIZES 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" Pat. 3,865,130 BRONZE PAD LOCKING BALL VALVE NUMBER 75-101-01 SIZE 1/4" A .43 B 1.12 C 2.25 D 1.81 E 3.00 Wt. .80 75-102-01 75-103-01 75-104-01 75-105-01 75-106-01 75-107-01 75-108-01 3/8" 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" .50 .50 .87 .87 1.00 1.25 1.50 1.12 1.12 1.68 1.68 2.00 2.18 2.34 2.25 2.25 3.37 3.37 4.00 4.37 4.68 1.81 1.81 2.25 2.25 2.62 2.87 3.06 3.00 3.00 3.87 3.87 5.50 5.50 5.50 .77 .70 2.03 1.83 3.48 4.23 5.69 Back For Pressure/Temperature Ratings, Refer to Page M-8, Graph No. 4 COPYRIGHT ©2003 CONBRACO IND., INC. – PRINTED IN U.S.A. Prev. Page | Next H-9 76-500 Series Stainless Steel Ball Valve with Spring Return Handle Threaded, 1/4" to 1" 2000 psig WOG, 1-1/4" to 2" 1500 psig WOG Cold Non-Shock. 150 psig Saturated Steam, Vacuum Service to 29 inches Hg. Federal Specification: WW-V-35C, Type: II, Composition: SS, Style: 3. MSS SP-110; Ball Valves Threaded, Socket-Welding, Solder Joint, Grooved and Flared Ends. FEATURES • Spring return to close (-01) • Spring return to open (-08) • RPTFE seats and stuffing box ring • All components of lever are stainless steel • Operating torque is approximately three times standard valve torque • Blow-out-proof stem design • Adjustable packing gland • Meets NACE MR-01-75 • Investment cast components STANDARD MATERIAL LIST 1. Handle 2. Stem packing 3. Stem bearing 4. Ball 5. Seat (2) SS w/vinyl Multifill PTFE RPTFE A276-316 Multifill PTFE 6. Retainer 7. Gland nut 8. Stem 9. Lever nut 10. Body seal 11. Body A276-316 (1/4" to 1") A351-CF8M (1-1/4" to 2") A276-316 A276-316 18-8 SS PTFE (1-1/4" to 2") A351-CF8M OPTIONS AVAILABLE: (SUFFIX) -08-14-21-24-35-49-57-60-P01-T01- OPTION 90º Reversed Stem Side Vented Ball (Uni-Directional) UHMWPE Seats (Non-PTFE) Graphite Packing VTFE Trim Assembled Dry Oxygen Cleaned Grounded Ball & Stem BSPP (Parallel) Thread Connection BSPT (Tapered) Thread Connection SIZES 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" STAINLESS STEEL BALL VALVE WITH SPRING RETURN HANDLE NUMBER 76-501-01 76-502-01 76-503-01 76-504-01 76-505-01 76-506-01 76-507-01 76-508-01 H-10 SIZE 1/4" 3/8" 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" Back A .37 .37 .50 .68 .87 1.00 1.25 1.50 B 1.03 1.03 1.12 1.50 1.68 2.00 2.18 2.75 C 2.06 2.06 2.25 3.00 3.37 4.00 4.37 5.50 D 7.00 7.00 7.00 7.00 7.00 9.00 9.00 9.00 Wt. 1.26 1.25 1.31 1.98 2.35 3.96 4.78 6.66 For Pressure/Temperature Ratings, Refer to Page M-12, Graph No. 14 (1/4" to 1") Refer to Page M-11, Graph No. 12 (1-1/4" to 2") COPYRIGHT ©2003 CONBRACO IND., INC. – PRINTED IN U.S.A. Prev. Page | Next 78-100 Series Bronze Ball Valve With Dust Cover and Chain Threaded End x 3/4" Hose Connection. FEATURES • Chromium plated ball • Blow-out-proof stem design • RPTFE seats and stuffing box ring • Adjustable packing gland • Securely attached dust cover with chain. (Dust cover cannot be used to contain pressure) STANDARD MATERIAL LIST 1. Lever and grip 2. Stem packing 3. Stem bearing 4. Ball 5. Seat (2) 6. Retainer SS/vinyl RPTFE RPTFE B16, chrome plated RPTFE B16 7. Gland nut 8. Stem 9. Lever nut 10. Dust cover 11. Body B16 B16 SS B16 B584-C84400 For Pressure/Temperature Ratings, Refer to Page M-9, Graph No. 4 BRONZE BALL VALVE WITH CAP AND CHAIN NUMBER 78-103-01 78-104-01 78-165-01 SIZE 1/2" NPT x 3/4" Hose 3/4" NPT x 3/4" Hose 1" NPT x 3/4"Hose Back A B C D E F Wt. .50 1.68 2.81 2.97 3.87 1.75 .63 .68 1.96 3.50 3.67 4.87 2.12 1.39 .87 2.24 3.92 4.16 5.28 2.43 2.11 COPYRIGHT ©2003 CONBRACO IND., INC. – PRINTED IN U.S.A. Prev. Page | Next H-11 78-124 & 78-125 Bronze 5-Port Fuel Selector Ball Valve Threaded. 50 psig WOG. FEATURES • SS lever and nut • RPTFE bearing and packing • Non-lubricated design • Operation: Four selected inlets feed on common outlet - pointer on handle indicates the selected inlet • Blow-out-proof stem design • Adjustable packing gland • PTFE seats H STANDARD MATERIAL LIST 1. Lever and grip 2. Stem packing 3. Stem bearing 4. Ball 5. Seat (4) 6. Gland nut 7. Stem 8. Lever nut 9. Retainer (3) 10. Body 304 SS w/vinyl RPTFE RPTFE B16, chrome plated PTFE B16 B16 304 SS B16 B584-C84400 B C E D F A Dia. Port Typ. 5pls B C BRONZE 5-PORT FUEL SELECTOR BALL VALVE NUMBER SIZE A B C D E F G H Wt./100 78-124-01 1/2" .50 1.26 2.52 2.27 3.53 1.12 10-24 1.40 106 78-125-01A 3/4" .75 1.53 3.12 2.87 3.87 1.53 1/4-20 1.98 264 H-12 Back COPYRIGHT ©2003 CONBRACO IND., INC. – PRINTED IN U.S.A. Prev. Page | Next 78-200 Series Bronze Ball Valve With Dust Cover And Chain Solder End x 3/4" Hose Connection. FEATURES • Chromium plated ball • Blow-out-proof stem design • RPTFE seats and stuffing box ring • Adjustable packing gland • Securely attached dust cover with chain. (Dust cover cannot be used to contain pressure) STANDARD MATERIAL LIST 1. Lever and grip 2. Stem packing 3. Stem bearing 4. Ball 5. Seat (2) 6. Retainer SS/Vinyl RPTFE RPTFE B16. chrome plated RPTFE B16 7. Gland nut 8. Stem 9. Lever nut 10. Dust cover 11. Body B16 B16 SS B16 B584-C84400 The 78-200 is designed to be soft soldered into lines without disassembly. This allows a tested valve to be installed without disturbing the seats and seals in any way. Soldering temperature not to exceed 500ºF. For Pressure/Temperature Ratings, Refer to Page M-8, Graph No. 4 BRONZE BALL VALVE WITH CAP AND CHAIN NUMBER SIZE 78-203-01 1/2" Solder x 3/4" Hose 78-204-01 3/4" Solder x 3/4" Hose 78-195-01 1" Solder x 3/4" Hose Back A .50 B 1.68 C 3.14 D 3.28 E 3.89 F 1.75 G .500 H .629 Wt. .71 .68 1.96 3.94 4.09 4.89 2.12 .750 .879 1.44 0.87 2.24 4.49 4.73 5.28 2.43 .900 1.129 2.13 COPYRIGHT ©2003 CONBRACO IND., INC. – PRINTED IN U.S.A. Prev. Page | Next H-13 78-200 Series Bronze Threaded Surface Mount Ball Valve NPT Threaded, 600 psig WOG, Cold Non-Shock. 150 psig Saturated Steam. Vacuum Service to 29 inches Hg. Federal Specification: WW-V-35C, Type: II, Composition: BZ, Style: 3. MSS SP-110; Ball Valves Threaded, Socket-Welding, Solder Joint, Grooved and Flared Ends. FEATURES • Chromium plated ball • RPTFE seats and stuffing box ring • Blow-out-proof stem design • Adjustable packing gland STANDARD MATERIAL LIST 1. Lever and grip 2. Stem packing 3. Stem bearing 4. Ball 5. Seat (2) Steel, zinc plated w/vinyl RPTFE RPTFE B16, chrome plated RPTFE 6. Retainer 7. Gland nut 8. Stem 9. Lever nut 10. Body B16 B16 B16 Steel, zinc plated B584-C84400 BRONZE THREADED SURFACE MOUNT BALL VALVE NUMBER 78-248-01 78-250-01 78-256-01 78-438-01 SIZE 1/4" 3/8" 1/2" 3/4" A .43 .50 .50 .68 B 1.12 1.12 1.12 1.50 C 2.25 2.25 2.25 3.00 D 1.78 1.78 1.78 2.12 E 3.87 3.87 3.87 4.87 F .93 .93 .93 1.06 G 1.87 1.87 1.87 2.12 Wt. .68 .68 .65 1.40 For Pressure/Temperature Ratings, Refer to Page M-8, Graph No. 4 H-14 Back COPYRIGHT ©2003 CONBRACO IND., INC. – PRINTED IN U.S.A. Prev. Page | Next 78-257/267 Series Brass And Bronze Instrumentation Ball Valve Male x Female Threaded. 400 psig WOG, Cold Non-Shock. Air & Liquid Service Rating. FEATURES • Micro-finish ball • Blow-out-proof stem design • Nitrile stem seal • Plated steel tee handle • Optional mixed end fittings available • PTFE seats • Compact design STANDARD MATERIAL LIST 1. Lever and grip 2. Drive pin 3. O-Ring 4. Stem 5. Seat (2) 6. Stem boss 7. Ball* 8. Stem screw 9. Retainer 10. Body Steel, zinc plated w/vinyl Steel, zinc plated Nitrile B16 PTFE B16 B16 Steel, zinc plated B16 B16 or B584-C84400 * Chrome Plated Ball In Bronze Valves. For Pressure/Temperature Ratings, Refer to Page M-8, Graph No. 3 BRASS INSTRUMENTATION BALL VALVE TEE HANDLE NUMBER 78-260-05 78-261-05 SIZE 1/8"M x 1/8"F 1/4"M x 1/4"F A .21 .31 B .37 .43 C 1.43 1.43 D .87 .87 E 1.25 1.25 Cv* 4.0 5.5 Wt. .20 .19 Cv* 4.0 5.5 Wt. .20 .19 Cv* 4.0 5.5 Wt. .19 .19 BRASS INSTRUMENTATION BALL VALVE SCREW SLOT NUMBER 78-262-05 78-263-05 SIZE 1/8"M X 1/8"F 1/4"M X 1/4"F A .21 .31 B .37 .43 C 1.43 1.43 D .75 .75 E N/A N/A BRONZE INSTRUMENTATION BALL VALVE SCREW SLOT NUMBER 78-257-01 78-258-01 SIZE 1/8"M x 1/4"F 1/4"M x 1/4"F A .21 .31 B .80 .80 C 1.60 1.60 D .72 .72 E N/A N/A BRONZE INSTRUMENTATION BALL VALVE LEVER HANDLE NUMBER SIZE A B C D E Cv* Wt. 78-267-01 1/4"M X 1/4"F .25 .65 1.45 .93 1.37 5.5 .20 *The Cv factor is the gallons of water per minute that the valve will pass with a 1 psig pressure drop. Back COPYRIGHT ©2003 CONBRACO IND., INC. – PRINTED IN U.S.A. Prev. Page | Next H-15 78-621/625 Series Bronze Irrigation Ball Valve Threaded. 600 psig Water, Cold Non-Shock. FEATURES • Chromium plated ball • RPTFE seats and stuffing box ring • Temperature range: +50ºF to +400ºF • Blow-out-proof stem design • Adjustable packing gland STANDARD MATERIAL LIST 1. Head adapter 2. Stem packing 3. Stem bearing 4. Ball 5. Seat (2) 6. Body seal A351-CF8M RPTFE RPTFE B16, chrome plated RPTFE PTFE (1-1/4" to 2") 7. Gland nut 8. Stem 9. Screw 10. Retainer 11. Body B16 B16 SS B16 (3/4" to 1") B584-C84400 (1-1/4" to 2") B584-C84400 FEATURES: • Automatic Draining in the Off Position • SS Underground Curb Stop Handle Drain Port Caution: Do not use where drained media could cause damage. See options section (option -41) for description of Auto-Drain feature. BRONZE IRRIGATION BALL VALVE NUMBER SIZE 78-621-01 3/4" 78-622-01 1" 78-623-01 1-1/4" 78-624-01 1-1/2" 78-625-01 2" H-16 Back A .68 .87 1.00 1.25 1.50 B 1.47 1.66 1.98 2.12 2.35 C 2.96 3.34 3.97 4.28 4.67 D 2.40 2.53 3.00 3.18 3.37 E 1.81 1.81 2.50 2.50 2.50 Wt. 1.59 1.92 3.57 4.68 6.11 For Pressure/Temperature Ratings, Refer to Page M-8, Graph No. 4 COPYRIGHT ©2003 CONBRACO IND., INC. – PRINTED IN U.S.A. Prev. Page | Next 78-664/78-962 Series Bronze Ball Valve With Center Drain Threaded, 600 psig WOG, Cold Non-Shock. FEATURES • Chromium plated ball • RPTFE seats and stuffing box ring • Mounting pad with bonding screw • Blow-out-proof stem design • Adjustable packing gland • Drainable ball cavity to prevent freeze damage STANDARD MATERIAL LIST 1. Lever and grip 2. Stem packing 3. Stem bearing 4. Ball 5. Seat (2) 6. Retainer 304 SS w/vinyl RPTFE RPTFE B16, chrome plated RPTFE B16 (3/4" & 1") B584-C84400 (1-1/4" to 2") 7. Gland nut 8. Stem 9. Lever nut 10. Body seal 11. Body 12. Drain plug 13. Screw B16 B16 SS PTFE (1-1/4" to 2") B584-C84400 B16 Brass 3/4" - 2"..10-24 NC BRONZE BALL VALVE WITH CENTER DRAIN NUMBER 78-664-01 78-665-01 78-666-01 78-667-01 78-962-01 SIZE 3/4" 1" 1-1/4" 1-1/2" 2" Back A .68 .87 1.00 1.25 1.50 B 1.50 1.68 2.00 2.18 2.34 C 3.00 3.37 4.00 4.37 4.68 D 2.12 2.25 2.62 3.05 3.24 E 4.87 4.87 5.50 8.00 8.00 F .87 .87 .93 .93 .93 G 1.37 1.37 1.50 1.50 1.50 H .17 .21 .28 .40 .45 Wt. 1.53 1.86 3.39 4.68 5.72 For Pressure/Temperature Ratings, Refer to Page M-8, Graph No. 4 COPYRIGHT ©2003 CONBRACO IND., INC. – PRINTED IN U.S.A. Prev. Page | Next H-17 78-668 Series Bronze Purge And Drain Ball Valve Solder End Flow Port, Hose Connection Drain Port. 600 psig WOG, Cold Non-Shock. FEATURES • Chromium plated ball • RPTFE seats and stuffing box ring • Hose thread connection for disposal of drained media • Blow-out-proof stem design • Adjustable packing gland • Furnished with dust cover* and chain STANDARD MATERIAL LIST 1. Lever and grip 2. Stem packing 3. Stem bearing 4. Ball 5. Seat (2) 6. Solder Retainer (2) 7. Hose Retainer Steel, zinc plated w/vinyl RPTFE RPTFE B16, chrome plated RPTFE B16 B16 8. Port Cap 9. Stem 10. Lever nut 11. Body 12. Washer 13. Gland screw 14. Dust cover C B16 B16 Steel, zinc plated B584-C84400 316 SS B16 B16 FLOW PATTERN B G F E D H J BRONZE PURGE & DRAIN BALL VALVE NUMBER SIZE A B C D E F G H J Wt. 78-668-01 3/4" .64 2.19 4.37 1.62 2.59 3.56 1.50 .88 .75 2.66 78-668-02 1" .75 2.41 4.82 1.91 3.56 5.33 1.91 1.13 .90 2.75 The 78-668 is designed to be soft soldered into lines without disassembly. This allows a tested valve to be installed without disturbing the seats and seals in any way. Soldering temperature not to exceed 500ºF. For Pressure/Temperature Ratings, Refer to Page M-8, Graph No. 4 H-18 Back * Dust cover cannot be used to contain pressure. COPYRIGHT ©2003 CONBRACO IND., INC. – PRINTED IN U.S.A. Prev. Page | Next 89-500 Series Carbon Steel Ball Valve With Spring Return Handle Threaded, 1/4"to 1" 2000 psig WOG, 1-1/4" to 2" 1500 psig WOG. Cold Non-Shock, 150 psig Saturated Steam, Vacuum Service to 29 inches Hg. Federal Specification: WW-V-35C, Type: II, Composition: CS, Style: 3. MSS SP-110; Ball Valves Threaded, Socket-Welding, Solder Joint, Grooved and Flared Ends. FEATURES • Spring return to close (-01) • Blow-out-proof stem design • Spring return to open (-08) • Adjustable packing gland • RPTFE stuffing box ring • Investment cast components • All components of lever are stainless steel • Multifill seats • Nitride corrosion protection • Operating torque is approximately three times standard valve torque STANDARD MATERIAL LIST 1. Handle 2. Stem packing 3. Stem bearing 4. Ball 5. Seat (2) SS Multifill PTFE RPTFE A108-CS chrome plated Multifill PTFE 6. Retainer 7. Gland nut 8. Stem 9. Lever nut 10. Body seal 11. Body A108-CS (1/4" to 1") A216-WCB (1-1/4" to 2") A108-CS A276-316 Steel, Zinc Plated PTFE (1-1/4" to 2") A216-WCB VARIATIONS AVAILABLE: 89-540 Series (316 SS Ball & Stem) OPTIONS AVAILABLE: (SUFFIX) -08-14-21-24-35-P01-T01- OPTION 90º Reversed Stem Side Vented Ball (Uni-Directional) UHMWPE Seats (Non-PTFE) Graphite Packing VTFE Trim BSPP (Parallel) Thread Connection BSPT (Tapered) Thread Connection SIZES 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" 1/4" to 2" CARBON STEEL BALL VALVE WITH SPRING RETURN HANDLE NUMBER 89-501-01 89-502-01 89-503-01 89-504-01 89-505-01 89-506-01 89-507-01 89-508-01 SIZE 1/4" 3/8" 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" Back A .37 .37 .50 .68 .87 1.00 1.25 1.50 B 1.03 1.03 1.12 1.50 1.68 2.00 2.18 2.75 C 2.06 2.06 2.25 3.00 3.37 4.00 4.37 5.50 D 7.00 7.00 7.00 7.00 7.00 9.00 9.00 9.00 Wt. 1.26 1.25 1.31 1.98 2.35 3.96 4.78 6.66 For Pressure/Temperature Ratings, Refer to Page M-12, Graph No. 13 (1/4" to 1") Refer to Page M-11, Graph No. 11 (1-1/4" to 2") COPYRIGHT ©2003 CONBRACO IND., INC. – PRINTED IN U.S.A. Prev. Page | Next H-19 95-100 Series Bronze Full Port Stop and Drain Ball Valve Threaded, 400 psig WOG, Cold Non-Shock. Federal Specification: WW-V-35C, Type: II, Composition: BZ, Style: 3. MSS SP-110; Ball Valves Threaded, Socket-Welding, Solder Joint, Grooved and Flared Ends. FEATURES • Chromium plated ball • RPTFE seats and stuffing box ring • Drain cap designed to prevent loss • Blow-out-proof stem design • Adjustable packing gland • Rugged construction STANDARD MATERIAL LIST 1. Lever and grip 2. Gland screw 3. Lever nut 4. Seat (2) 5. Stem packing 6. Stem bearing Steel, zinc plated w/vinyl B16 Zinc plated steel RPTFE RPTFE RPTFE 7. Stem 8. Ball 9. Retainer 10. Body 11. Cap and seal B16 B16, chrome plated B16 B584-C84400 B16 and EPR VARIATIONS AVAILABLE: 95-120 Series (Adjustable Stop Lever) OPTIONS AVAILABLE: (SUFFIX) -07-08-10-14-15-18-20-27-32-45-46-48-49-63- OPTION Steel Tee Handle 90º Reversed Stem SS Lever & Nut Side Vented Ball (Uni-Directional) Wheel Handle, Steel Plain Yellow Grip Slot Vented Ball SS Latch-Lock Lever & Nut SS Tee Handle & Nut Less Lever & Nut Latch Lock Lever - Lock Close Only SS Oval Handle (No Latch) & Nut Assembled Dry Threaded x Solder Retainer SIZES 1/2" to 1" 1/2" to 1" 1/2" to 1" 1/2" to 1" 1/2" to 1" 1/2" to 1" 1/2" to 1" 1/2" to 1" 1/2" to 1" 1/2" to 1" 1/2" to 1" 1/2" to 1" 1/2" to 1" 1/2" to 1" BRONZE FULL PORT STOP AND DRAIN BALL VALVE NUMBER 95-103-01 95-104-01 95-105-01 H-20 SIZE 1/2" 3/4" 1" Back A .50 .81 1.00 B 1.09 1.56 1.81 C 2.18 3.12 3.62 D 1.75 2.15 2.43 E 3.87 4.87 4.87 Wt. .63 1.39 1.70 For Pressure/Temperature Ratings, Refer to Page M-8, Graph No. 3 COPYRIGHT ©2003 CONBRACO IND., INC. – PRINTED IN U.S.A. Prev. Page | Next 95-200 Series Bronze Solder End Full Port Stop and Drain Ball Valve Solder End, 400 psig WOG, Cold Non-Shock. Federal Specification: WW-V-35C, Type: II, Composition: BZ, Style: 3. MSS SP-110; Ball Valves Threaded, Socket-Welding, Solder Joint, Grooved and Flared Ends. FEATURES • Chromium plated ball • RPTFE seats and stuffing box ring • Drain cap designed to prevent loss • Blow-out-proof stem design • Adjustable packing gland • Rugged construction STANDARD MATERIAL LIST 1. Lever and grip 2. Gland screw 3. Lever nut 4. Seat (2) 5. Stem packing 6. Stem bearing Steel, zinc plated w/vinyl B16 Steel, zinc plated RPTFE RPTFE RPTFE 7. Stem 8. Ball 9. Retainer 10. Body 11. Cap and seal B16 B16, chrome plated B16 B584-C84400 B16 and EPR VARIATIONS AVAILABLE: 95-220 Series (Adjustable Stop Lever) OPTIONS AVAILABLE: (SUFFIX) -07-08-10-14-15-18-20-24-27-32-45-46-48-49- OPTION Steel Tee Handle 90º Reversed Stem SS Lever & Nut Side Vented Ball (Uni-Directional) Wheel Handle, Steel Plain Yellow Grip Slot Vented Ball Graphite Packing SS Latch-Lock Lever & Nut SS Tee Handle & Nut Less Lever & Nut Latch Lock Lever - Lock Close Only SS Oval Handle (No Latch) & Nut Assembled Dry SIZES 1/2" to 1" 1/2" to 1" 1/2" to 1" 1/2" to 1" 1/2" to 1" 1/2" to 1" 1/2" to 1" 1/2" to 1" 1/2" to 1" 1/2" to 1" 1/2" to 1" 1/2" to 1" 1/2" to 1" 1/2" to 1" The 95-200 is designed to be soft soldered into lines without disassembly. This allows a tested valve to be installed without disturbing the seats and seals in any way. Soldering temperatures not to exceed 500ºF. BRONZE SOLDER END STOP AND DRAIN FULL PORT BALL VALVE NUMBER 95-203-01 95-204-01 95-205-01 SIZE 1/2" 3/4" 1" Back A .50 .81 1.00 B 1.43 2.12 2.21 C 2.87 4.12 4.43 D 1.75 2.15 2.43 E F 3.87 .628 4.87 .878 4.87 1.128 G .50 .75 .90 Wt. .70 1.23 1.90 For Pressure/Temperature Ratings, Refer to Page M-8, Graph No. 3 COPYRIGHT ©2003 CONBRACO IND., INC. – PRINTED IN U.S.A. Prev. Page | NextH-21 82-200 Series Bronze 3-Piece Full Port Ball Valve With Male Brazed Extensions Solder End, 600 psig WOG, Cold Non-Shock. 150 psig Saturated Steam. Vacuum Service to 29 inches Hg. Federal Specification: WW-V-35C, Type: II, Composition: BZ, Style: 1. Designed for soft solder or brazed installation without disassembly. MSS SP-110; Ball Valves Threaded, Socket-Welding, Solder Joint, Grooved and Flared Ends. FEATURES • Full port configuration • RPTFE seats and seals • In-line repairable • Blow-out-proof stem design • Adjustable packing gland • Latch lock handle optional STANDARD MATERIAL LIST 1. Lever and grip 2. Stem packing 3. Stem bearing 4. Ball 5. Seat (2) 6. End cap (2) 7. Gland 8. Stem Steel, zinc plated w/vinyl RPTFE RPTFE B16, chrome plated RPTFE B584-C84400 B16 B16 9. Lever nut 10. Body bolt 11. Hex nut 12. Body 13. Extension 14. Brazing alloy 15. Cap plugs Steel, zinc plated Steel, zinc plated Steel, zinc plated B584-C84400 Type K copper tubing Sil-Fos 5 (not shown) For Pressure/Temperature Ratings, Refer to Page M-8, Graph No. 4 BRONZE 3-PIECE FULL PORT BALL VALVE WITH MALE BRAZED EXTENSIONS STANDARD PART NO. PART W/316 SS NUMBERS BALL & STEM 82-203-B8 82-243-A8 82-204-A8 82-244-B3 82-205-B7 82-245-B1 82-206-B7 82-246-B0 82-207-B2 82-247-B2 82-208-B7 82-248-B2 OXYGEN CLEANED PART NUMBERS 82-203-A1 82-204-A2 82-205-A1 82-206-A1 82-207-A1 82-208-A1 PART NO. W/316 SS BALL & STEM SIZE 82-243-A7 1/2" 82-244-B2 3/4" 82-245-B0 1" 82-246-A9 1-1/4" 82-247-B0 1-1/2" 82-248-B1 2" A .62 .81 1.00 1.25 1.50 2.00 B 6.90 6.96 6.97 7.40 7.53 7.61 C 13.81 13.93 13.95 14.75 15.07 15.23 D 2.00 2.18 2.62 2.89 3.37 3.70 E 4.87 4.87 5.50 5.50 8.00 8.00 F .049 .065 .065 .065 .072 .083 G* 5/8" 7/8" 1-1/8" 1-3/8" 1-5/8" 2-1/8" *NOMINAL TUBING O.D. H-22 Back COPYRIGHT ©2003 CONBRACO IND., INC. – PRINTED IN U.S.A. Prev. Page | Next Wt. 1.66 2.37 3.43 5.52 8.51 14.20 82-200 Series Bronze 3-Piece Full Port Ball Valve With 6" Female Brazed Extensions Solder End, 600 psig WOG, Cold Non-Shock. 150 psig Saturated Steam. Vacuum Service to 29 inches Hg. Federal Specification: WW-V-35C, Type: II, Composition: BZ, Style: 1. Designed for soft solder or brazed installation without disassembly. MSS SP-110; Ball Valves Threaded, Socket-Welding, Solder Joint, Grooved and Flared Ends. FEATURES • Full port configuration • RPTFE seats & seals • In-line repairable • Blow-out-proof stem design • Adjustable packing gland • Latch lock handle optional STANDARD MATERIAL LIST 1. Lever and grip 2. Stem packing 3. Stem bearing 4. Ball 5. Seat (2) 6. End cap (2) 7. Gland 8. Stem Steel, zinc plated w/vinyl RPTFE RPTFE B16, chrome plated RPTFE B584-C84400 B16 B16 9. Lever nut 10. Body bolt 11. Hex nut 12. Body 13. Extension 14. Brazing alloy 15. Cap plugs Steel, zinc plated Steel, zinc plated Steel, zinc plated B584-C84400 Type K copper tubing Sil-Fos 5 (not shown) For Pressure/Temperature Ratings, Refer to Page M-8, Graph No. 4 BRONZE 3-PIECE FULL PORT BALL VALVE WITH FEMALE BRAZED EXTENSIONS STANDARD OXYGEN NUMBERS CLEANED SIZE A B C D E F G* H 82-203-C2 82-203-C3 1/2" .62 7.40 14.80 2.00 4.87 .50 5/8" .049 82-204-C3 82-204-C4 3/4" .81 7.71 15.42 2.18 4.87 .75 7/8" .065 82-205-C2 82-205-C3 1" 1.00 7.92 15.84 2.62 5.50 .90 1-1/8" .065 82-206-C1 82-206-C2 1-1/4" 1.25 8.45 16.90 2.89 5.50 .96 1-3/8" .065 82-207-B8 82-207-B9 1-1/2" 1.50 8.58 17.16 3.37 8.00 1.09 1-5/8" .072 82-208-C1 82-208-C2 2" 2.00 9.06 18.12 3.70 8.00 1.34 2-1/8" .083 Wt. 1.7 2.4 3.5 5.6 8.6 14.3 *NOMINAL TUBING O.D. Back COPYRIGHT ©2003 CONBRACO IND., INC. – PRINTED IN U.S.A. Prev. Page | Next H-23 70-200-C8 Series Bronze Standard Port Ball Valve With 6" Female Brazed Extensions Solder end, 600 psig WOG, Cold Non-shock. 150 psig Saturated Steam. Vacuum Service to 29 inches Hg. MSS SP-110:Ball Valves, Threaded, SW, Solder Joint, Grooved & Flared Ends. FEATURES • Chromium plated ball • Adjustable packing gland • RPTFE seats and stuffing box ring • Blow-out proof stem design STANDARD MATERIAL LIST 1. Lever & grip 2. Stem packing 3. Stem bearing 4. Ball 5. Seat (2) 6. Retainer Steel, zinc plated, w/vinyl MPTFE RPTFE B16, chrome plated RPTFE B16 (1/2" to 1") B584 C84400(1-1?" to 3") 7. Gland nut 8. Stem 9. Lever nut 10. Body seal 11. Body 12. Extension 13. Brazing alloy VARIATIONS AVAILABLE: 70-240-C8 Series B16 B16 Steel, zinc plated PTFE (1-1/4" to 3") B584 C84400 Type K copper tubing Sil-Fos 5 OPTIONS AVAILABLE: (SUFFIX) -04-07-15-27-57- (316 SS Ball & Stem) OPTION 2-1/4" CS Stem Extension Steel Tee Handle Wheel Handle, Steel SS Latch Lock Lever & Nut Oxygen Cleaned SIZES 1/2" to 3" 1/2" to 2" 1/2" to 2" 1/2" to 3" 1/2" to 3" For Pressure/Temperature Ratings, Refer to Page M-8, Graph No. 4 BRONZE STANDARD PORT BALL VALVE WITH 6" FEMALE BRAZED EXTENSIONS SIZE 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3" H-24 Back PART # 70-203-C8 70-204-C8 70-205-C8 70-206-C8 70-207-C8 70-208-C8 70-209-C8A 70-200-C8 A .50 .68 .87 1.00 1.25 1.50 2.00 2.50 B 1.43 1.93 2.25 2.31 2.62 3.18 3.74 4.12 C 2.87 3.87 4.50 4.62 5.25 6.37 7.51 8.25 D 1.75 2.12 2.25 2.62 3.06 3.25 3.75 4.12 E 3.87 4.87 4.87 5.50 8.00 8.00 8.00 8.00 COPYRIGHT ©2003 CONBRACO IND., INC. – PRINTED IN U.S.A. F .630 .880 1.130 1.380 1.630 2.130 2.630 3.130 G .50 .75 .90 .96 1.09 1.34 1.48 1.67 H 14.87 15.87 16.50 16.62 17.25 18.37 19.51 20.25 Prev. Page | Next 77-200-C8 Series Bronze Full Port Ball Valve With 6" Female Brazed Extensions Solder end, 600 psig WOG, Cold Non-shock. 150 psig Saturated Steam. Vacuum Service to 29 inches Hg. MSS SP-110:Ball Valves, Threaded, SW, Solder Joint, Grooved & Flared Ends. FEATURES • Chromium plated ball • Full port for full flow and min. pressure drop • Adjustable packing gland • RPTFE seats and stuffing box ring • Blow-out proof stem design STANDARD MATERIAL LIST 1. Lever & grip 2. Stem packing 3. Stem bearing 4. Ball 5. Seat (2) 6. Retainer Steel, zinc plated, w/vinyl MPTFE RPTFE B16, chrome plated RPTFE B16 (1/2" to 1") B584 C84400(1-1/4" to 3") B16 7. Gland nut 8. Stem 9. Lever nut 10. Body seal 11. Body 12. Extension 13. Brazing alloy VARIATIONS AVAILABLE: 70-240-C8 Series B16 Steel, zinc plated PTFE (1-1/4" to 3") B584 C84400 Type K copper tubing Sil-Fos 5 OPTIONS AVAILABLE: (SUFFIX) -04-07-15-27-57- (316 SS Ball & Stem) OPTION 2-1/4" CS Stem Extension Steel Tee Handle Wheel Handle, Steel SS Latch Lock Lever & Nut Oxygen Cleaned 3/4" to 3/4" to 3/4" to 3/4" to 3/4" to SIZES 2-1/2" 1 1/4" 1 1/4" 2-1/2" 2-1/2" For Pressure/Temperature Ratings, Refer to Page M-8, Graph No. 4 BRONZE FULL PORT BALL VALVE WITH 6" FEMALE BRAZED EXTENSIONS SIZE 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" Back PART # 77-204-C8 77-205-C8 77-206-C8 77-207-C8 77-208-C8 77-209-C8 A .81 1.00 1.25 1.50 2.00 2.50 B 2.12 2.33 2.60 3.00 3.62 3.93 C 4.12 4.64 5.15 6.00 7.24 7.87 D 2.12 2.62 2.87 3.34 3.71 4.12 E 4.87 5.50 5.50 8.00 8.00 8.00 COPYRIGHT ©2003 CONBRACO IND., INC. – PRINTED IN U.S.A. F .880 1.130 1.380 1.630 2.130 2.630 G .75 .90 .96 1.09 1.34 1.48 H 16.12 16.64 17.15 18.00 19.24 19.87 Prev. Page | Next H-25 73-300 Series Carbon Steel Double Union End Ball Valve Threaded, 3000 psig WOG, Cold Non-Shock, 150 psig Saturated Steam. Vacuum Service to 29 inches Hg. Federal Specification: WW-V-35C, Type: II, Composition: CS, Style: 1. MSS SP-110; Ball Valves Threaded, Socket-Welding, Solder Joint, Grooved and Flared Ends. FEATURES • Heavy duty quarter turn lever • RPTFE seats and seals • Steel barstock design • Easy installation and maintenance • Blow-out-proof stem design • Adjustable packing gland • Chromium plated ball • Nitride corrosion protection UL LISTING @ 250 PSIG MAX U® L LISTED • Guide YRPV: Gas shutoff valve for use with natural and manufactured gases. • Guide YSDT: LP gas shutoff valve. • Guide YRBX: Flammable liquid shutoff valve. Note: Listings apply ONLY to the standard -01 valves. STANDARD MATERIAL LIST 1. Lever and grip 2. Stem packing 3. Stem bearing 4. Ball 5. Tailpiece (2) 6. Retainer 7. Gland nut 8. Stem Steel, zinc plated w/vinyl RPTFE RPTFE A108-CS chrome plated A108-CS A108-CS A108-CS A108-CS chrome plated 9. Lever nut 10. Body 11. Seat (2) 12. Union nut (2) 13. Seat holder 14. Union seal (2) 15. Retainer seal Steel, zinc plated A108-CS RPTFE A108-CS A108-CS RPTFE RPTFE VARIATIONS AVAILABLE: 73-340 Series (316 SS ball & Stem) CARBON STEEL DOUBLE UNION END BALL VALVE NUMBER 73-301-01 73-302-01 73-303-01 73-304-01 73-305-01 73-306-01 73-307-01 73-308-01 H-26 SIZE 1/4" 3/8" 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" Back A .43 .57 .62 .81 1.00 1.25 1.50 1.75 B 2.50 2.50 2.50 2.71 2.96 2.87 3.46 3.75 C 5.00 5.00 5.00 5.31 6.06 6.12 7.12 7.50 D 2.50 2.50 2.50 2.62 3.12 3.43 3.56 4.18 E 5.62 5.62 5.62 5.62 6.62 8.00 8.00 9.00 Wt. 3.51 3.45 3.35 4.48 7.04 9.96 14.83 20.50 For Pressure/Temperature Ratings, Refer to Page M-13, Graph No. 15 COPYRIGHT ©2003 CONBRACO IND., INC. – PRINTED IN U.S.A. Prev. Page | Next 73-400 Series Carbon Steel Double Union End Socket Weld Ball Valve Socket Weld End, 3000 psig WOG, Cold Non-Shock, 150 psig Saturated Steam. Vacuum Service to 29 inches Hg. Federal Specification: WW-V-35C, Type: II, Composition: CS, Style: 1. MSS SP-110; Ball Valves Threaded, Socket-Welding, Solder Joint, Grooved and Flared Ends. FEATURES • Heavy duty quarter turn lever • RPTFE seats and seals • Steel barstock design • Easy installation and maintenance • Blow-out-proof stem design • Adjustable packing gland • Chromium plated ball • Nitride corrosion protection UL LISTING @ 250 PSIG MAX • Guide YRPV: Gas shutoff valve for use with natural and manufactured gases. • Guide YSDT: LP gas shutoff valve. • Guide YRBX: Flammable liquid shutoff valve. Note: Listings apply ONLY to the standard -01 valves. U® L LISTED STANDARD MATERIAL LIST 1. Lever and grip 2. Stem packing 3. Stem bearing 4. Ball 5. Seat (2) 6. Retainer 7. Gland nut 8. Stem Steel, zinc plated w/vinyl RPTFE RPTFE A108-CS chrome plated RPTFE A108-CS A108-CS A108-CS chrome plated 9. Lever nut 10. Body 11. Tail Piece (2) 12. Union nut (2) 13. Seat holder 14. Union seal (2) 15. Retainer seal Steel, zinc plated A108-CS A108-1018 A108-CS A108-CS RPTFE RPTFE VARIATIONS AVAILABLE: 73-440 Series (316 SS Ball & Stem) CARBON STEEL DOUBLE UNION END SOCKET WELD BALL VALVE NUMBER SIZE A B C D E F 73-403-01 73-404-01 73-405-01 73-406-01 73-407-01 73-408-01 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" .62 .81 1.00 1.25 1.50 1.75 2.50 2.71 2.93 2.87 3.46 3.75 5.00 5.31 6.06 6.12 7.12 7.50 2.50 2.62 3.12 3.43 3.56 4.18 5.62 5.62 6.62 8.00 8.00 9.00 .43 .56 .68 .81 .81 1.06 Back G Wt. .855 3.35 1.065 4.48 1.330 7.04 1.675 9.96 1.915 14.83 2.406 20.50 For Pressure/Temperature Ratings, Refer to Page M-13, Graph No. 15 COPYRIGHT ©2003 CONBRACO IND., INC. – PRINTED IN U.S.A. Prev. Page | Next H-27 79-700 Series Full Port Forged Brass Refrigerant Ball Valve FEATURES • Bi-directional flow design • RPTFE seats and seals • Chromium plated pressure equalizing ball • Exclusive design rotation stops • Copper extensions silver brazed to body allows use of Sil-Fos • Capped, triple sealed stem with metal back up reduces leaks U® L • Blow-out-proof stem design • Adjustable packing gland • Hermetic welded assembly • Full Port Design UL LISTINGS • Guide SFJQ: Valves, Refrigerant LISTED STANDARD MATERIAL LIST 1. Cap 2. Stem packing 3. Stem bearing 4. Ball 5. Seat (2) 6. Packing gland 7. Stem B16 RPTFE RPTFE B16, Chrome plated RPTFE B16 B16 8. O-Ring 9. Stop Plate 10. Hex nut 11. Retainer 12. Tube extension 13. Body FULL PORT FORGED BRASS REFRIGERANT BALL VALVE NUMBER 79-701-01 79-702-01 79-703-01 79-704-01 79-705-01 79-706-01 79-707-01 79-708-01 79-709-01 79-600-01* SIZE 3/8" 1/2" 5/8" 7/8" 1-1/8" 1-3/8" 1-5/8" 2-1/8" 2-5/8" 3-1/8" A .32 .45 .50 .75 1.00 1.25 1.50 2.00 2.43 2.50 B 3.18 3.18 3.43 3.69 4.20 4.54 4.47 4.84 5.00 7.00 C 6.09 6.09 6.59 7.07 8.00 8.63 8.85 9.59 10.00 14.00 D 1.55 1.55 1.55 1.83 2.01 2.61 2.79 3.17 3.90 3.90 E .38 .38 .50 .75 .90 .96 1.09 1.34 1.48 1.67 F .38 .50 .62 .87 1.12 1.38 1.62 2.12 2.62 3.13 Wt. Cv .94 2.9 .94 5.6 .94 13.1 1.31 31.9 2.06 68.0 4.00 109 4.25 152 6.00 275 17.50 349 17.60 391 Equivalent Length of tube 10.8 13.3 10.4 11.2 10.7 11.6 13.2 15.1 21.1 30.1 Neoprene Steel, Plated B16 B16 Copper tubing Forged brass For Pressure/Temperature Ratings, Refer to Page M-13, Graph No. 16 * Note: 3-1/8" size is not full port H-28 Back COPYRIGHT ©2003 CONBRACO IND., INC. – PRINTED IN U.S.A. Prev. Page | Next 80-100 Series Bronze LP-Gas Ball Valve Threaded, 600 psig WOG, Cold Non-Shock. 250 psig LP-Gas. 150 psig Saturated Steam. Vacuum Service to 29 inches Hg. Federal Specification: WW-V-35C, Type: II, Composition: BZ, Style: 3. MSS SP-110; Ball Valves Threaded, Socket-Welding, Solder Joint, Grooved and Flared Ends. FEATURES • UL Listed for LP-Gas, natural gas, flammable liquid and heated oil • Large ports to reduce pressure drop • RPTFE seats and seals • Blow-out-proof stem design • Quarter turn On-Off • Adjustable packing gland • One piece bronze body • Chromium plated ball UL LISTINGS U® L LISTED • Guide YSDT: LP-Gas shut-off valve. • Guide YRPV: Gas shut-off valve for use with natural and manufactured gases. • Guide YRBX: Flammable liquid shutoff valve. • Guide MHKZ: No. 6 oil at 250ºF. STANDARD MATERIAL LIST 1. Lever and grip 2. Stem packing 3. Stem bearing 4. Ball 5. Seat (2) Steel, zinc plated w/vinyl RPTFE RPTFE B16, chrome plated RPTFE 6. Retainer 7. Gland nut 8. Stem 9. Lever nut 10. Seal 11. Body B16 or B584-C84400 B16 B16 Steel, zinc plated PTFE (1-1/4" to 3") B584-C84400 OPTIONS AVAILABLE: (SUFFIX) -27- OPTION SS Latch-Lock Lever & Nut SIZES 1/4" to 3" Note: 250 psig Max. UL Listing. BRONZE LP-GAS BALL VALVE NUMBER 80-101-01 80-102-01 80-103-01 80-104-01 80-105-01 80-106-01 80-107-01 80-108-01 80-109-01 80-100-01 SIZE 1/4" 3/8" 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3" Back A .37 .37 .50 .68 .87 1.00 1.25 1.50 2.50 2.50 B 1.03 1.03 1.12 1.50 1.68 2.00 2.18 2.34 3.25 3.37 C 2.06 2.06 2.25 3.00 3.37 4.00 4.37 4.68 6.50 6.75 D 1.75 1.75 1.81 2.12 2.25 2.62 2.87 3.06 4.12 4.12 E 3.87 3.87 3.87 4.87 4.87 5.50 5.50 5.50 8.00 8.00 Wt. .60 .56 .63 1.39 1.72 3.26 4.57 5.56 17.25 18.60 For Pressure/Temperature Ratings, Refer to Page M-8, Graph No. 4 COPYRIGHT ©2003 CONBRACO IND., INC. – PRINTED IN U.S.A. Prev. Page | Next H-29 81-100 Series Bronze LP-Gas Ball Valve With Plain Ball Threaded, 600 psig WOG, Cold Non-Shock. 250 psig LP-Gas. 150 psig Saturated Steam. Vacuum Service to 29 inches Hg. Federal Specification: WW-V-35C, Type: II, Composition: BZ, Style: 3. MSS SP-110; Ball Valves Threaded, Socket-Welding, Solder Joint, Grooved and Flared Ends. FEATURES • UL Listed for LP-Gas, natural gas, flammable liquid and heated oil • Large ports to reduce pressure drop • RPTFE seats and seals • Blow-out-proof stem design • Quarter turn On-Off • Adjustable packing gland • One piece bronze body • Plain ball UL LISTINGS U® L LISTED • Guide YSDT: LP-Gas shut-off valve. • Guide YRPV: Gas shut-off valve for use with natural and manufactured gases. • Guide YRBX: Flammable liquid shutoff valve. • Guide MHKZ: No. 6 oil at 250ºF. STANDARD MATERIAL LIST 1. Lever and grip 2. Stem packing 3. Stem bearing 4. Ball 5. Seat (2) Steel, zinc plated w/vinyl RPTFE RPTFE B16 RPTFE 6. Retainer 7. Gland nut 8. Stem 9. Lever nut 10. Seal 11. Body B16 or B584-C84400 B16 B16 Steel, zinc plated PTFE (1-1/4" to 3") B584-C84400 Note: 250 psig Max. UL Listing. BRONZE LP-GAS BALL VALVE NUMBER 81-101-05 81-102-05 81-103-05 81-104-05 81-105-05 81-106-05 81-107-05 81-108-05 81-109-05 81-100-05 H-30 SIZE 1/4" 3/8" 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3" Back A .37 .37 .50 .68 .87 1.00 1.25 1.50 2.50 2.50 B 1.03 1.03 1.12 1.50 1.68 2.00 2.18 2.34 3.25 3.37 C 2.06 2.06 2.25 3.00 3.37 4.00 4.37 4.68 6.50 6.75 D 1.75 1.75 1.81 2.12 2.25 2.62 2.87 3.06 4.12 4.12 E 3.87 3.87 3.87 4.87 4.87 5.50 5.50 5.50 8.00 8.00 Wt. .60 .56 .63 1.39 1.72 3.26 4.57 5.56 17.25 18.60 For Pressure/Temperature Ratings, Refer to Page M-8, Graph No. 4 COPYRIGHT ©2003 CONBRACO IND., INC. – PRINTED IN U.S.A. Prev. Page | Next 90-100 Series Bronze Uni-Body Saturn Ball Valve ® Threaded, 300 psig WOG, Cold Non-Shock. 150 psig Saturated Steam. Federal Specification: WW-V-35C, Type: II, Composition: BZ, Style: 3. MSS SP-110; Ball Valves Threaded, Socket-Welding, Solder Joint, Grooved and Flared Ends. FEATURES • UL Listed at 300 psig for fuel, inert gas and flammable liquids • Valves with tee handles UL listed • RPTFE seats and seals • Blow-out-proof stem design • Adjustable packing gland • One piece bronze body • Chromium plated ball • Compact UL LISTINGS U® L LISTED • Guide YRPV: Gas shutoff valve for use with natural and manufactured gases. • Guide YQNZ: Compressed gas shutoff valve for use with air, inert gases, hydrogen, oxygen and common refrigerants except ammonia. • Guide YRBX: Flammable liquid shutoff valve. STANDARD MATERIAL LIST 1. Lever and grip 2. Stem packing 3. Stem bearing 4. Ball 5. Seat (2) Steel, zinc plated w/vinyl RPTFE RPTFE B16, chrome plated RPTFE 6. Retainer 7. Gland nut 8. Stem 9. Lever nut (Screw 1/2") 10. Body B16 B16 B16 Steel, zinc plated B584-C84400 OPTIONS AVAILABLE: (SUFFIX) -05-07- OPTION Plain Ball Steel Tee Handle SIZES 1/2" to 2" 1/2" to 2" BRONZE UNI-BODY SATURN® BALL VALVE NUMBER 90-103-01 90-104-01 90-105-01 90-106-01 90-107-01 90-108-01 SIZE 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" A .37 .50 .62 .81 1.00 1.25 B 1.14 1.36 1.50 1.81 2.06 2.43 C 2.15 2.61 2.90 3.50 3.79 4.42 D 1.68 1.75 2.00 2.18 2.62 2.81 E 3.87 3.87 4.87 4.87 5.50 5.50 Wt. .53 .82 1.25 1.98 2.99 4.64 For Pressure/Temperature Ratings, Refer to Page M-8, Graph No. 3 Back COPYRIGHT ©2003 CONBRACO IND., INC. – PRINTED IN U.S.A. Prev. Page | Next H-31 489-100 Series Carbon Steel LP-Gas Ball Valve NPT Threaded. 1/4" to 1" 2000 psig WOG; 1-1/4" to 2" 1500 psig WOG; 2-1/2" to 3" 1000 psig WOG. Cold Non-Shock. 250 psig LP-Gas. 150 psig Saturated Steam. Vacuum Service to 29 in. Hg. Federal Specification: WW-V-35C. Type: II. Composition: CS. Style: 3. MSS SP-110; Ball Valves Threaded, Socket-Welding, Solder Joint, Grooved and Flared Ends. FEATURES • UL Listed for LP-Gas, natural gas and flammable liquid to 250 psig • RPTFE seats and stuffing box ring • Mounting pad for easy actuator mounting • Investment cast components U® L LISTED • Blow-out-proof stem design • Adjustable packing gland • Nitride corrosion protection UL LISTINGS • Guide YSDT: • Guide YRPV: • Guide YRBX: • Guide MHKZ: LP-Gas shut-off valve. Gas shut-off valve for use with natural and manufactured gases. Flammable liquid shutoff valve. No. 6 oil at 250ºF. STANDARD MATERIAL LIST 1. Lever and grip 2. Stem packing 3. Stem bearing 4. Ball 5. Seat (2) 6. Retainer 7. Gland nut 8. Stem 9. Lever nut 10. Body seal 11. Body Steel, zinc plated w/vinyl RPTFE RPTFE A108-12L14, chrome plated RPTFE A108-12L14 (1/4" to 1") A216-WCB (1-1/4" to 3") A108-12L14 A108-12L14 Steel, zinc plated PTFE (1-1/4" to 3") A216-WCB VARIATIONS AVAILABLE: 489-140-01 Series with 316 SS Ball and Stem, UL Listed as noted above. Note: 250 psig Max. UL Listing. CARBON STEEL BALL VALVE NUMBER 489-101-01 489-102-01 489-103-01 489-104-01 489-105-01 489-106-01 489-107-01 489-108-01 489-109-01 489-100-01 H-32 SIZE 1/4" 3/8" 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3" Back A .37 .37 .50 .68 .87 1.00 1.25 1.50 2.50 2.50 B 1.03 1.03 1.12 1.50 1.68 2.00 2.18 2.75 3.37 3.37 C 2.06 2.06 2.25 3.00 3.37 4.00 4.37 5.50 6.75 6.75 D 1.75 1.75 1.81 2.12 2.25 2.62 3.05 3.24 4.12 4.12 E 3.87 3.87 3.87 4.87 4.87 5.50 8.00 8.00 8.00 8.00 F .50 .50 .50 .87 .87 .93 .93 .93 2.75 2.75 G 1.12 1.12 1.12 1.37 1.37 1.50 1.50 1.50 3.37 3.37 Wt. .58 .54 .63 1.27 1.63 3.06 3.98 5.99 15.57 16.79 For Pressure/Temperature Ratings, Refer to Page M-12, Graph No. 13 (1/4" to 1") Refer to Page M-11, Graph No. 11 (1-1/4" to 2") COPYRIGHT ©2003 CONBRACO IND., INC. – PRINTED IN U.S.A. Prev. Page | Next SECTION J CONTENTS OPTIONAL CONFIGURATIONS DESCRIPTION PAGE Options Identification & Description J-1 Options Identification & Description J-2 Options Identification & Description J-3 Options Identification & Description J-4 Options Identification & Description J-5 Options Identification & Description J-6 Options Identification & Description J-7 Options Identification & Description J-8 Back Prev. Page | Next Options -02: Static Grounding Device Used to help prevent static electrical discharge (sparking) between valve components. Accomplished by use of a stainless steel spring washer or coil spring (dependent on valve size). -02 grounds stem, lever & lever nut to valve body. -03, -04: 1-1/4" (-03) and 2-1/4" (-04) Zinc Plated Carbon Steel Stem Extension Assemblies Length of Extension Used to elevate the handle to accommodate pipe insulation or to relocate the position of the handle where necessary. Also available with balancing stop. (Example: 70-120-04) -05: Plain Ball Unplated ball available for bronze valves. Furnished exclusively by customer preference. Not recommended by engineering. -07: Steel Tee Handle Used where space limitation prevents use of the standard lever type handle. Useful also to help prevent accidental openings by: Limiting projection of the operating device distance beyond the valve and increasing the turning force required to operate valve. Also, balances the turning effect of vibration. Back COPYRIGHT ©2002 CONBRACO IND., INC. – PRINTED IN U.S.A. Prev. Page | Next J-1 Options -08: 90º Reversed Stem Lever grip no longer indicates flow or no flow. (Valve shown in open position). -10: SS Lever And Nut -13: Stamped 157 SWP Stamped 157 SWP 600 WOG 157 SWP -14: Side Vented Ball (Uni-Directional Flow) Vent is on the upstream side. Valve body will be stamped with arrow indicating proper flow direction. Equalizes pressure gain caused by liquid thermal expansion, preventing seat blow-out . Does not reduce the load capability of seats. Direction of Flow J-2 Back COPYRIGHT ©2002 CONBRACO IND., INC. – PRINTED IN U.S.A. Prev. Page | Next Options -15: Steel Wheel Handle Prevents accidental operation and balances the turning effect of vibration. -16: -58: Horizontal Or Vertical Chain Lever Horizontal Or Vertical Chain Lever -17: Rough Chrome Plated Rough Chrome Plated 600 WOG -20: Slot Vented Ball (Bi-Directional Flow) Available on bronze balls. (All other ball materials are already slot-vented). Back COPYRIGHT ©2002 CONBRACO IND., INC. – PRINTED IN U.S.A. Prev. Page | Next J-3 Options -24: Graphite Stem Packing - Necessary for firesafe design -27: SS Latch-Lock Handle and SS Nut -28: Mounting Pads Not Threaded -29: 1500 psig 3-Piece Firesafe Design Graphite packing and gaskets -32: SS Tee Handle And Nut -35: PTFE Trim Reduces operating torque approx. 30% J-4 Back COPYRIGHT ©2002 CONBRACO IND., INC. – PRINTED IN U.S.A. Prev. Page | Next Options -39: SS High-Rise Locking Wheel Handle -40: Cyl-Loc -45: Less Lever And Nut -46: SS Lock Closed Only Latch-Lock Handle -47: SS Latch-Lock Oval Handle SS Latch-Lock Oval Handle -50: 2-1/4" Locking Stem Extension Zinc Plated CS -60: Grounded Ball And Stem Grounded Ball And Stem Back COPYRIGHT ©2002 CONBRACO IND., INC. – PRINTED IN U.S.A. Prev. Page | Next J-5 Options -19 U.S. PATENT #4,498,320 PAD-LOCKING DEVICES FOR 72 & 73 SERIES RECOMMENDED FOR AFTERMARKET -19 PAD-LOCKING DEVICES FOR 76 & 89 SERIES -19 PAD-LOCKING DEVICES 82-100-19 SERIES J-6 Back COPYRIGHT ©2002 CONBRACO IND., INC. – PRINTED IN U.S.A. Prev. Page | Next Options TANK BOTTOM FLANGE VALVE 2" SIZE ONLY -23 CAM-LOCK OPTIONAL HANDLE -30 SS BODY TRIM (BOLTS, NUTS & LEVER) -59 Back COPYRIGHT ©2002 CONBRACO IND., INC. – PRINTED IN U.S.A. Prev. Page | Next J-7 Options Automatic Drain (-41) • Conforms to certain OSHA requirements in pneumatic installations • Easy, safe maintenance of pneumatic tools • Cannot be used where drained media could cause damage • Temperature range =+50°F to 200°F • Recommended for air services only • Pressures 0- 125 psig 70-100 (Threaded) TYPICAL AUTO-DRAIN OPERATION MAIN AIR LINE TO PNEUMATIC PRESS OR OTHER PNEUMATIC TOOL PRESSURE 75-104-41 WHEN THIS VALVE IS SHUT OFF FOR MAINTENANCE OF A PNEUMATIC TOOL, PRESSURE BETWEEN THE VALVE AND TOOL IS AUTOMATICALLY DRAINED TO ATMOSPHERE TO PREVENT POSSIBLE INJURY CAUSED BY ACCIDENTAL OPERATION OF THE TOOL. NOTE: Temperature variations and dirty systems can cause vent discharge in both the open and closed positions. J-8 Back VALVE IN OPEN POSITION DRAIN VENT SHUT OFF. PRESSURE VALVE CLOSED AND DRAINING. UPSTREAM SEAT STOPS AIR FLOW. DOWNSTREAM SYSTEM IS VENTED TO ATMOSPHERE. COPYRIGHT ©2002 CONBRACO IND., INC. – PRINTED IN U.S.A. Prev. Page | Next SECTION M CONTENTS ENGINEERING DATA DESCRIPTION PAGE Flow Data 70-100, 71-100, 71AR, 73A-100, 74-100, 76-100, 80-100, 81-100 & 89-100 Series M-1 76F, 77, 77AR, 82-100, 82-200, 83R-100, 83R-200, 83-500, 83-600, 83R-700, 86R-100, 86R-200, 86-500, 86-600, 86R-700 & 86-900 Series M-1 87-100, 87A-100, 87A-200, 88-100, 88A-100 & 88A-200 Series M-2 9A-100, 90-100, 91-100, 92-100, 93-100, 96-100, 83-300, 83-400, 85-100 & 85-200 Series M-2 70-600, 76-600 & 72 Series M-2 Cautionary Statement M-3 Torque Constants For Apollo End Entry Valves M-4 Torque Constants for Apollo Flanged and Top Entry Valves M-5 Apollo Ball Valve Seat Application Guide M-6 Pressure Temperature Curves Class 150 Carbon and Stainless Steel Ball Valves M-7 400# and 600# Bronze Ball Valves M-8 Class 300 Carbon and Stainless Steel Ball Valves M-9 1000# Carbon and Stainless Steel Ball Valves M-10 1500# Carbon and Stainless Steel Ball Valves M-11 2000# Carbon and Stainless Steel Ball Valves M-12 3000# Carbon Steel Ball Valves M-13 Refrigeration Valves M-13 400# Carbon Steel Ball Valves M-14 Class 150 Alloy 20 Ball Valves M-14 1500# Alloy 20 Ball Valves M-15 2000# Alloy 20 Ball Valves M-15 800# Stainless Steel Ball Valves M-16 800# Nickel Ball Valves M-16 Apollo Ball Valve Material Reference Data M-17& M-18 Philips Real Time Radiographic System Conversion Factors Back M-19 M-20 & M-21 Prev. Page | Next FLOW DATA For Apollo® and Saturn® Ball Valves The listed Cv “factors” are derived from actual flow testing, in the Apollo® Ball Valve Division, Conbraco Industries, Inc., Pageland, South Carolina. These tests were completed using standard “off the shelf” valves with no special preparation and utilizing standard schedule 40 pipe. It should be understood that these factors are for the valve only and also include the connection configuration. The flow testing is done utilizing water as a fluid media and is a direct statement of the gallons of water flowed per minute with a 1 psig pressure differential across the valve/connection unit. Line pressure is not a factor. Because the Cv is a factor, the formula can be used to estimate flow of most media for valve sizing. Flow of Liquid Q = Cv ∆P SpGr or ∆P = (Q)2 (SpGr) (Cv)2 Where: Q = flow in US gpm ∆P = pressure drop (psig) SpGr = specific gravity at flowing temperature Cv = valve constant Flow of Gas Where: Q = flow in SCFH ∆P = pressure drop (psig) Q = 1360 Cv (∆P) (P2) SpGr = specific gravity (SpGr) (T) (based on air = 1.0) P1 = inlet pressure–psia or ∆P = 5.4 x 10-7 (SpGr) (T) (Q)2 (psig + 14.7) T = (temp. °F + 460) (Cv)2 (P2) Cv = valve constant Cv FACTORS SERIES: 70-100, 71-100, 71AR, 73A-100, 74-100, 76-100, 80-100 81-100, 89-100 SIZE OPEN 1/4" 8.4 90° 3/8" 7.2 1/2" 15 3/4" 30 1" 43 1-1/4" 48 1-1/2" 84 2" 108 2-1/2" 190 3" 370 4" 670 Cv FACTORS 76F, 77, 77AR SERIES SIZE OPEN 90° 1/4" 3/8" 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 8.1 15 15 51 68 125 177 389 503 Cv FACTORS 82-100/200, 83R-100/200/700, 86R-100/200/700, 83-500/600, 86-500/600/900 SERIES SIZE OPEN Back 90° 1/4" 3/8" 1/2" 3/4" 1" 8.1 14 26 51 68 1-1/4" 1-1/2" 120 170 COPYRIGHT ©2003 CONBRACO IND., INC. – PRINTED IN U.S.A. 2" 2-1/2" 3" 4" 376 510 996 1893 Prev. Page | Next M-1 Cv FACTORS 87-100 & 88-100 SERIES 87A-100 & 88A-100 SERIES SIZE 1/2"(2) 3/4"(2) FULL OPEN 15 19 1"(2) 1-1/2" 2" 2-1/2" 3" 4" 6" 8" 10"(1) 47 86 104 234 375 673 1099 1902 3890 Cv FACTORS 87A-200 & 88A-200 SERIES SIZE 1" 1-1/2" 2" 2-1/2" 3" 4" 6" 8"(1) 10" (1) 12" (1) FULL OPEN 75 195 410 545 1021 2016 4837 9250 15170 22390 (1) Calculated Data (2) 87-100 & 88-100 Only Cv FACTORS 9A-100, 90-100, 91-100, 92-100, 93-100 & 96-100 SERIES SIZE OPEN 90° 1/4" 3/8" 1/2" 3/4" 1" 8.3 6.7 5.7 10 16 1-1/4" 1-1/2" 25 40 2" 62 Cv FACTORS 83-300/400, 85-100/200 SERIES SIZE 1/2" 3/4" 1" FULL OPEN 16 18 35 1-1/4" 1-1/2" 48 84 2" 104 Cv FACTORS 70-600 & 76-600 SERIES SIZE 1/2" 3/4" 1" FULL OPEN 5.4 12 14 1-1/4" 1-1/2" 21 34 2" 47 Cv FACTORS “72" SERIES M-2 Back SIZE 1/2" 3/4" 1" FULL OPEN 26 48 65 1-1/4" 1-1/2" 125 170 COPYRIGHT ©2003 CONBRACO IND., INC. – PRINTED IN U.S.A. 2" 216 Prev. Page | Next Engineering Data CAUTION IT IS THE RESPONSIBILITY OF THE INSTALLER AND/OR SYSTEM DESIGNER TO ENSURE THAT THESE VALVES ARE INSTALLED IN ACCORDANCE WITH APPLICABLE AND CURRENT ANSI B31 STANDARDS. FOLLOWING ARE SOME SAFEGUARDS THAT MUST BE CONSIDERED PRIOR TO INSTALLATION. EASE OF OPERATION - BALL VALVES ARE EASIER TO OPERATE THAN OTHER TYPES OF SHUT-OFF VALVES. WHEN THESE VALVES ARE INSTALLED WHERE THERE IS A POSSIBILITY THAT THE HANDLES CAN BE HOOKED OR SNAGGED, APPROPRIATE ACTION TO PREVENT ACCIDENTAL OR UN-WANTED OPENING OR CLOSING OF THE VALVE MUST BE TAKEN. VIBRATION IN, THROUGH OR AROUND THE VALVE CAN ALSO CAUSE ACCIDENTAL OR UN-WANTED OPENING OR CLOSING OF THE VALVE. PRESSURE RELIEF - DETERMINE AND PROVIDE CORRECTIVE ACTION AGAINST EXCESSIVE PRESSURE BUILD UP IN THE VALVE OR PIPING SYSTEM DUE TO THERMAL EXPANSION. THERMAL EXPANSION CAN CREATE EXTREME PRESSURES WELL ABOVE THE WORKING PRESSURE LIMIT OF THE VALVE WHICH CAN CAUSE LEAKING OR BURSTING OF THE VALVE. SUPPORTS - IF YOU CHOOSE TO CONNECT A FLEXIBLE HOSE OR OTHER NON-RIDGED CONDUIT TO THE VALVE, THE DESIGN OF SUCH INSTALLATION MUST PREVENT ANY “WHIPPING ACTION” THAT COULD INJURE OR DAMAGE PERSONNEL OR EQUIPMENT. VALVE MUST BE IMMOBILE. FITTINGS - USE ONLY THOSE FITTINGS OR PIPING THAT ARE COMPATIBLE WITH THE VALVES BEING USED TO PREVENT BREAKAGE AND/OR LEAKAGE. (FOR ONE EXAMPLE, IT IS POOR PRACTICE AND NEVER RECOMMENDED TO USE PLASTIC PIPE OR FITTINGS WITH METALLIC VALVES SINCE THERMAL EXPANSION, EXTERNAL FORCES OR OTHER SITUATIONS CAN CAUSE BREAKAGE OR LEAKAGE AT OR NEAR THE JOINT). PRESSURE/TEMPERATURE LIMITS - THE MAXIMUM WORKING PRESSURE LIMIT OF THE VALVE IS MARKED ON THE VALVE BODY. NEVER EXCEED THIS “W.O.G.” RATING WHICH IS SPECIFIED UP TO 100°F. TEMPERATURES HIGHER THAN 100°F DECREASE THE MAXIMUM WORKING PRESSURE LIMIT. REFER TO THE APPROPRIATE PRESSURE/TEMPERATURE CHART THAT IS PUBLISHED IN THE CATALOG. FREEZING - PROVIDE MEANS TO PROTECT THE VALVE FROM FREEZING AND BURSTING WHEN USED WITH LIQUIDS. FLUID COMPATIBILITY - CONSIDER THE CORROSIVE, EROSIVE AND ADHESIVE EFFECTS OF FLUIDS ON THE VALVE AND PIPING COMPONENTS. IT IS YOUR RESPONSIBILITY TO ENSURE THAT THE VALVE IS COMPATIBLE WITH THE MATERIAL(S) USED IN THE SYSTEM. INSTALLATION - THE USE OF TFE PIPE TAPE AS A SEALANT IS RECOMMENDED FOR THREADED VALVES WHEN MAKING JOINTS. CORRECT LUBRICATION OF STAINLESS STEEL PIPE THREADS IS ESPECIALLY IMPORTANT TO PREVENT THREAD GALLING. DO NOT APPLY EXCESSIVE TORQUE WHEN INSTALLING THE VALVE. TO PREVENT DISTORTION OR DAMAGE TO THE VALVE, DO NOT APPLY TORQUE THROUGH THE VALVE. USE PROPER SUPPORTS IN HANDLING PRE-FABRICATED SECTIONS AND IN FINAL INSTALLATION. ALWAYS TEST THE SYSTEM BEFORE USING. MAINTENANCE - DO NOT DISASSEMBLE THE VALVE WHILE UNDER PRESSURE. REQUEST A MAINTENANCE MANUAL BEFORE ATTEMPTING REPAIRS TO THE VALVE. FOR BRONZE VALVES – WARNING - THIS PRODUCT IS MADE FROM BRONZE ALLOYS WHICH CONTAIN LEAD; A CHEMICAL KNOWN TO THE STATE OF CALIFORNIA TO CAUSE CANCER AND BIRTH DEFECTS AND OTHER REPRODUCTIVE HARM. (PLUMBER CALIFORNIA LAW REQUIRES THAT THIS WARNING BE GIVEN TO THE CONSUMER). Back COPYRIGHT ©2003 CONBRACO IND., INC. – PRINTED IN U.S.A. Prev. Page | Next M-3 Torque Constants for Apollo AR™ Two Piece Actuator Ready Valves DIFFERENTIAL PRESSURE psig Valve Model 100 200 400 600 800 1000 1500 2000 Size LSST*** -24 Adder (in.-lbs.) (in.-lbs.) 45 1/4 - 1/2 25 26 27 28 30 32 35 38 50 *STD PORT 3/4 50 50 52 54 57 60 64 72 100 45 **71-ARX-64 1 85 86 88 90 94 97 110 138 170 56 89-ARX-64 1-1/4 140 140 145 156 160 172 194 280 96 76-ARX-64 1-1/2 160 164 173 186 195 201 235 320 96 2 220 230 258 270 310 350 460 440 96 2-1/2 450 495 576 680 790 900 900 96 3 500 540 700 820 920 1030 1000 96 1/4 - 1/2 25 26 27 28 50 45 3/4 50 54 60 70 100 56 *FULL PORT **77-ARX-64 1 140 148 160 180 280 56 1-1/2 290 300 310 340 580 96 2 340 355 420 563 680 96 * Torques tested with multifilled seats. Does not require torque adjustment of -20%. ** 71-ARX-64 and 77-ARX-64 rated to 600 psig maximum. *** LSST - Long Stand Still Torque Torque Constants for Apollo® End Entry Valves (1),(2) TORQUE CONSTANT (lb-in) AT DIFFERENTIAL PRESSURE INDlCATED (psig) DIFFERENTIAL PRESSURE psig 200 400 600 800 1000 LSST* -24 / -29 Adder (in.-lbs.) (in.-lbs.) 48 70 45 62 64 100 45 106 116 130 202 56 205 216 246 286 342 96 216 265 280 311 384 96 271 276 300 309 354 542 96 715 715 790 1430 96 35 35 40 70 45 Valve Model Size STD PORT 1/4 - 1/2 35 35 40 43 46 70-64X 3/4 50 50 54 59 71-14X 1 101 101 103 76-10X 1-1/4 171 171 76-60X 1-1/2 192 192 89-14X 2 271 399-10X 2-1/2 & 3 1/4 - 1/2 1500 1200 3/4 74 74 84 148 56 full port 1 234 234 250 468 56 bronze 1-1/4 286 286 321 552 56 77-14X 1-1/2 357 357 398 714 96 2 650 650 722 1300 96 2-1/2 & 3 715 715 790 1430 111 45 1/2 35 35 40 43 46 48 70 STD PORT 3/4 78 78 90 123 140 157 156 56 3-PIECE 1 156 156 178 201 229 257 312 56 83-34X & 44X 1-1/4 208 208 230 248 282 317 416 96 85R-10X & 20X 1-1/2 234 234 276 309 352 395 468 96 2 350 350 390 450 513 576 700 96 FULL PORT 1/4 - 1/2 78 78 90 123 140 157 156 56 3-PIECE 3/4 156 156 178 201 229 257 312 56 96 82-14X & 24X 1 208 208 230 248 282 317 416 83R-14X, 24X & 74X 1-1/4 234 234 276 309 352 395 468 96 83-54X & 64X 1-1/2 350 350 390 450 513 576 700 96 1024 86R-10X, 20X & 70X 2 715 715 755 800 912 86-50X & 60X 3 1030 1030 1087 1148 1212 401R-10X 4 1830 1430 96 2060 201 3660 399 * LSST - Long Stand Still Torque M-4 Back COPYRIGHT ©2003 CONBRACO IND., INC. – PRINTED IN U.S.A. Prev. Page | Next Torque Constants for Apollo® Flanged Ball Valves Torques Shown in lb-in. Valve Series Pressure (psig) LSST* -24 Adder (in.-lbs.) (in.-lbs.) 129 244 68 302 311 586 96 291 312 560 127 Valve Size 0 100 200 300 87A-100’s 1-1/2” SP 150 122 125 127 88A-140’s 2” SP 150 293 298 2-1/2” SP 150 280 286 400 500 600 700 740 3” SP 150 342 355 367 380 684 127 4” SP 150 1032 1062 1092 1122 2064 292 6” SP 150 1692 1752 1812 1872 3384 292 8” SP 150 1800 2050 2300 2550 3600 661 10” SP 150 6600 7000 7400 8350 13,200 661 87A - 200’s 1/2" FP 150 32 32 32 32 64 45 88A - 240’s 3/4" FP 150 58 58 58 58 116 68 1" FP 150 122 125 127 129 244 68 1-1/2” FP 150 293 298 302 311 586 96 2” FP 150 280 286 291 312 560 127 2-1/2” FP 150 342 355 367 380 684 127 3” FP 150 1032 1062 1092 1122 2064 292 4” FP 150 1692 1752 1812 1872 3384 292 6” FP 150 1800 2050 2300 2550 3600 661 8” FP150 6600 7000 7400 8350 13,200 661 87A - 700’s 1-1/2” SP 300 122 125 127 129 131 141 151 173 182 244 68 88A - 740’s 2” SP 300 293 298 302 311 326 339 351 365 371 586 96 2-1/2” SP 300 280 286 291 312 332 343 361 382 391 560 127 3” SP 300 342 355 367 380 393 410 426 441 447 684 127 4” SP 300 1032 1062 1092 1122 1152 1212 1272 1377 1452 2064 292 6” SP 300 1692 1752 1812 1872 1932 1992 2052 2181 2232 3384 292 8” SP 300 1800 2050 2300 2550 2800 3300 3800 4900 6000 3600 661 10” SP 300 6600 7000 7400 8350 9300 10,300 11,300 12,650 14,000 13,200 661 87A - 900’s 1/2" FP 150 32 32 32 32 32 32 32 32 32 64 45 88A - 940’s 3/4" FP 150 58 58 58 58 58 58 58 58 58 116 68 1” FP 300 122 125 127 129 131 141 151 173 182 244 68 1-1/2” FP 300 293 298 302 311 326 339 351 365 371 586 96 2” FP 300 280 286 291 312 332 343 361 382 391 560 127 2-1/2” FP 300 342 355 367 380 393 410 426 441 447 684 127 3” FP 300 1032 1062 1092 1122 1152 1212 1272 1377 1452 2064 292 4” FP 300 1692 1752 1812 1872 1932 1992 2052 2181 2232 3384 292 6” FP 300 1800 2050 2300 2550 2800 3300 3800 4900 6000 3600 661 8” FP 300 6600 7000 7400 8350 9300 10,300 11,300 12,650 14,000 13,200 661 Note (1) Constants are used to determine the in-service torque requirements of Conbraco’s valves. Note (2) Constants are based on RPTFE seats and clean dry air at the stated differential pressure. * LSST - Long Stand Still Torque Torque Constants For Top Entry Valves (1) DIFFERENTIAL PRESSURE (psig) Seat Options ***1 2 Valve Size 7*** A 100 285 500 740 1480 LSST* Graphoil® Adder (in.-lbs.) (in.-lbs.) 1/2 thru 1 85 110 140 180 290 170 68 1-1/2 205 260 330 415 660 410 96 2 350 430 550 735 1200 700 127 3 950 1250 1650 2000 3200 1900 245 3 C 4 2000 2500 3300 4100 6500 4000 399 5 D 6 5300 6700 8200 11,400 18,000 10,600 661 U 8 11,000 14,000 18,500 25,000 36,000 22,000 900 Z** 10 18,500 22,000 30,000 40,000 62,000 37,000 1326 **6 **** 1/2 thru 1 115 160 210 260 450 230 68 4 1-1/2 270 370 480 590 1000 540 96 8 2 475 650 860 1050 1750 950 127 9 3 1250 1850 2400 2950 4900 2500 245 4 2700 3700 4900 5900 10,000 5400 399 B 6 7410 10,100 13,400 16,400 25,300 14,820 661 8 15,000 20,000 26,000 32,000 56,000 30,000 900 10 25,000 32,000 45,000 60,000 96,000 50,000 1326 * LSST - Long Stand Still Torque ** Rated torque for #6 and U seat add 30% *** Rated torque for #1 & #7 PTFE seats can be reduced by 30%. **** Rated torque for #9 ceramic seat is to be increased by 10%. Back COPYRIGHT ©2003 CONBRACO IND., INC. – PRINTED IN U.S.A. Prev. Page | Next M-5 Apollo® Ball Valve Seat Application Guide Designation Range General Description -01 (RPTFE) to 450°F Glass Reinforced PolyTetraFluoroEthylene Seat Seals and Packings: Most commonly specified seat material. Maintains the chemical resistance of PTFE with increased resistance to wear and abrasion resulting in longer life. -21 (UHMWPE) to 180°F -35 (PTFE) to 400°F -38 (PEEK) to 550°F -56 (Multifill) to 500°F -64 (Multifill) to 500°F -65 (Multifill) to 500°F -78 (Delrin ) to 230°F -79 (Nylon) to 300°F -80 (Multiseal) to 500°F Ultra High Molecular Weight Polyethylene Seats with Graphite Seals and Packings: Offers good abrasion resistance making it suitable for use in high solids or slurry applications. This seat is frequently specified in services where fluorine off-gassing in even the slightest amounts is objectionable, services such as food and tobacco processing, and Nuclear services. UHMWPE should be used with caution in the presence of solvents, and the operating torque can be expected to be 30% higher than RPTFE seat materials. PolyTetraFluoroEthylene (PTFE) Seats, Seals and Packings: General application seat material, exhibiting lowest operating torque and excellent resistance to chemical attack. PolyEtherEtherKetone Seats with Graphite Seals and Packings: Offers a high strength alternative to RPTFE, resistant to creep and cold flow. This seat offers good abrasion resistance. This material offers similar chemical resistance to PTFE but should be checked on application. Operating torque tends to be 40% higher than RPTFE. Carbon and Graphite Reinforced PTFE Seats, Seals and Packings: Reduced creep and cold flow like any RPTFE but with 20% lower operating torque than the glass reinforced versions. Carbon and Graphite Reinforced PTFE Seats, Seals and Packings: Reduced creep and cold flow like any RPTFE but with 20% lower operating torque than the glass reinforced versions. Includes handle graphics for 250 psig saturated steam. Carbon and Graphite RPTFE Seats, Graphite Seals and Packings: Reduced creep and cold flow like any RPTFE but with 20% lower operating torque than the glass reinforced versions. This configuration is also good for steam applications. Delrin is the homopolymer version of Acetal. The material is both strong and rigid but not brittle making it ideal for many high pressure applications. It's a preferred material for use in hydrocarbon systems, oils and gases, but should be used with caution in hot wet systems. Nylon is a polyamide. This material has very good mechanical properties making it ideally suited for many high pressure applications. It's a preferred material for use in hydrocarbon systems, oils and gases, but should not be used in wet systems above 120°F. This material is the latest generation of PolyTetraFluoroEthylene. Currently offered only as seats in our Flanged and Top Entry products, this material improves on the chemical resistance of PTFE with increased resistance to wear, abrasion and creep resistance even above the glassed reinforced PTFE, without fillers. This material is particularly suited for primary monomer applications such as styrene, butadiene and latex offering performance nearly equal to PFA materials. M-6 Back COPYRIGHT ©2003 CONBRACO IND., INC. – PRINTED IN U.S.A. Prev. Page | Next Class 150 CS P-T Rating (Graph 1) Class 150 SS P-T Rating (Graph 2) Back COPYRIGHT ©2003 CONBRACO IND., INC. – PRINTED IN U.S.A. Prev. Page | Next M-7 400# Bronze P-T Rating (Graph 3) 600# Bronze P-T Rating (Graph 4) M-8 Back COPYRIGHT ©2003 CONBRACO IND., INC. – PRINTED IN U.S.A. Prev. Page | Next Class 300 CS P-T Rating (Graph 5) Class 300 SS P-T Rating (Graph 6) Back COPYRIGHT ©2003 CONBRACO IND., INC. – PRINTED IN U.S.A. Prev. Page | Next M-9 1000# CS P-T Rating (Graph 7) 1000# SS P-T Rating (Graph 8) M-10 Back COPYRIGHT ©2003 CONBRACO IND., INC. – PRINTED IN U.S.A. Prev. Page | Next 1500# CS P-T Rating (Graph 11) 1600 1500 1400 1300 1200 1100 1500# CS 1250# CS Pressure (psig) 1000 PTFE 900 RPTFE MPTFE 800 UHMWPE PEEK 700 Steam 600 500 400 300 200 100 0 -50 0 50 100 150 200 250 300 350 400 450 500 550 600 Temperature (F) 1500# SS P-T Rating (Graph 12) 1600 1500 1400 1300 1200 1100 1500# SS 1250# SS Pressure (psig) 1000 PTFE 900 RPTFE MPTFE 800 UHMWPE PEEK 700 Steam 600 500 400 300 200 100 0 -50 Back 0 50 100 150 200 250 300 350 400 450 COPYRIGHT ©2003 CONBRACO IND., INC. – PRINTED IN U.S.A. 500 550 600 Prev. Page | Next M-11 2000# CS P-T Rating (Graph 13) 2000# SS P-T Rating (Graph 14) M-12 Back COPYRIGHT ©2003 CONBRACO IND., INC. – PRINTED IN U.S.A. Prev. Page | Next 3000# CS P-T Rating (Graph 15) Refrigeration Valve P-T Rating (Graph 16) Back COPYRIGHT ©2003 CONBRACO IND., INC. – PRINTED IN U.S.A. Prev. Page | Next M-13 400# CS P-T Rating (Graph 17) Class 150 Alloy 20 P-T Rating (Graph 18) M-14 Back COPYRIGHT ©2003 CONBRACO IND., INC. – PRINTED IN U.S.A. Prev. Page | Next 1500# Alloy 20 P-T Rating (Graph 19) 2000# Alloy 20 P-T Rating (Graph 20) Back COPYRIGHT ©2003 CONBRACO IND., INC. – PRINTED IN U.S.A. Prev. Page | Next M-15 800# SS P-T Rating (Graph 21) 800# Nickel P-T Rating (Graph 22) M-16 Back COPYRIGHT ©2003 CONBRACO IND., INC. – PRINTED IN U.S.A. Prev. Page | Next APOLLO® BALL VALVE MATERIAL REFERENCE DATA Item/Property Barstock Casting Forging Carbon Steel ASTM Specifications Unified Numbering System MAJOR ELEMENTS Carbon Manganese Phosphorus Sulfur Silicon MECHANICAL PROPERTIES Tensile Strength Yield Strength A108-1215 G12150 A216-WCB J03002 A105 K03504 0.09% max. 0.75 - 1.05% 0.04 - 0.09% 0.26 - 0.35% - 0.30% max. 1.00% max. 0.04% max. 0.045% max 0.60% max. 0.35% max. 0.60 - 1.05% 0.04% max. 0.05% max. 0.35% max. 70,000 psi min. 36,000 psi min. 70,000 psi min. 36,000 psi min. 70,000 psi min. 36,000 psi min. 316 Stainless Steel ASTM Specifications Unified Numbering System MAJOR ELEMENTS Carbon Chromium Molybdenum Nickel MECHANICAL PROPERTIES Tensile Strength Yield Strength A276-316 S31600 A351-CF8M J92900 A182-F316 S31600 0.08% max. 16.00 - 18.00% 2.00 - 3.00% 10.00 - 14.00% 0.08% max. 18.00 - 21.00% 2.00 - 3.00% 9.00 - 12.00% 0.08% max. 16.00 - 18.00% 2.00 - 3.00% 10.00 - 14.00% 75,000 psi min. 30,000 psi min. 70,000 psi min. 30,000 psi min. 75,000 psi min. 30,000 psi min. 316L Stainless Steel ASTM Specifications Unified Numbering System MAJOR ELEMENTS Carbon Chromium Molybdenum Nickel MECHANICAL PROPERTIES Tensile Strength Yield Strength A276-316L S31603 A351-CF3M J92800 A182-F316L S31603 0.03% max. 16.00 - 18.00% 2.00 - 3.00% 10.00 - 14.00% 0.03% max. 17.00 - 21.00% 2.00 - 3.00% 9.00 - 13.00% 0.03% max. 16.00 - 18.00% 2.00 - 3.00% 10.00 - 15.00% 70,000 psi min. 25,000 psi min. 70,000 psi min. 30,000 psi min. 75,000 psi min. 30,000 psi min. B473-N08020 N08020 A351-CN7M N08007 B462-N08020 N08020 19.00 - 21.00% 3.00 - 4.00% 2.00% max. 2.00 - 3.00% 32.00 - 38.00% 19.00 - 22.00% 3.00 - 4.00% 1.50% max. 2.33 - 3.00% 27.50 - 30.50% 19.00 - 21.00% 3.00 - 4.00% 2.00% max. 2.00 - 3.00% 32.00 - 38.00% 80,000 psi min. 35,000 psi min. 62,000 psi min. 25,000 psi min. 80,000 psi min. 35,000 psi min. Alloy 20 ASTM Specifications Unified Numbering System MAJOR ELEMENTS Chromium Copper Manganese Molybdenum Nickel MECHANICAL PROPERTIES Tensile Strength Yield Strength Back COPYRIGHT ©2003 CONBRACO IND., INC. – PRINTED IN U.S.A. Prev. Page | Next M-17 APOLLO® BALL VALVE MATERIAL REFERENCE DATA Item/Property Barstock Casting Forging Hastelloy ASTM Specifications Unified Numbering System MAJOR ELEMENTS Chromium Molybdenum Nickel Tungsten MECHANICAL PROPERTIES Tensile Strength Yield Strength B574-C276 N10276 A494-CW12MW N30002 B564-N10276 N10276 14.5 - 16.5% 15.0 - 17.0% 51.0 - 63.5% 3.0 - 4.5% 15.5 - 17.5% 16.0 - 18.0% 49.2 - 60.0% 3.75 - 5.25% 14.5 - 16.5% 15.0 - 17.0% 51.0 - 63.5% 3.0 - 4.5% 100,000 psi min. 41,000 psi min. 72,000 psi min. 40,000 psi min. 100,000 psi min. 41,000 psi min. B160-N02200 N02200 A494-CZ100 N02100 B160-N02200 N02200 2.00 - 3.00% 99.00% max. 2.33 - 3.00% 95.00% min. 2.00 - 3.00% 99.00% max. 55,000 psi min. 15,000 psi min. 50,000 psi min. 18,000 psi min. 55,000 psi min. 15,000 psi min. Nickel ASTM Specifications Unified Numbering System MAJOR ELEMENTS Molybdenum Nickel MECHANICAL PROPERTIES Tensile Strength Yield Strength Nickel-Copper Alloy ASTM Specifications Unified Numbering System MAJOR ELEMENTS Copper Iron Manganese Molybdenum Nickel MECHANICAL PROPERTIES Tensile Strength Yield Strength B164-N04400 N04400 A494-M35-1 N/A B564-N04400 N04400 28.00 - 34.00% 2.50% max. 2.00% max. 2.00 - 3.00% 63.00% min. 26.00 - 33.00% 3.50% max. 1.50% max. 2.33 - 3.00% 60.00% min. 28.00 - 34.00% 2.50% max. 2.00% max. 2.00 - 3.00% 63.00% min. 70,000 psi min. 25,000 psi min. 65,000 psi min. 25,000 psi min. 70,000 psi min. 25,000 psi min. Leaded Brass & Bronze Alloys ASTM Specification Unified Numbering System MAJOR ELEMENTS Copper Tin Lead Zinc MECHANICAL PROPERTIES Tensile Strength Yield Strength B16 C36000 B584-C84400 C84400 60.0 - 63.0% 2.5 - 3.7% 33.0 - 37.5% 78.0 - 82.0% 2.3 - 3.5% 6.0 - 8.0% 7.0 - 10.0% 25,000 psi min. 10,000 psi min. 29,000 psi min. 13,000 psi min. 85-5-5-5 Bronze Alloys ASTM Specification Unified Numbering System MAJOR ELEMENTS Copper Tin Lead Zinc MECHANICAL PROPERTIES Tensile Strength Yield Strength M-18 Back N/A C83600 B62-C83600 C83600 84.0 - 86.0% 4.0 - 6.0% 4.0 - 6.0% 4.0 - 6.0% 84.0 - 86.0% 4.0 - 6.0% 4.0 - 6.0% 4.0 - 6.0% 30,000 psi min. 14,000 psi min. 30,000 psi min. 14,000 psi min. COPYRIGHT ©2003 CONBRACO IND., INC. – PRINTED IN U.S.A. Prev. Page | Next Philips Real Time Radiographic System Our in house, state-of-the-art radiograph system allows for the highest quality and most expedient casting inspection and approval system in the industry. This system consists of: • Philips MG450, 450 KV Constant Potential X-Ray Generation Unit with MCH 451 Tube Head • Imaging system utilizing a High Grade Image Intensification Unit coupled to a High Resolution Camera and Monitor • Digital Image Processor • A 300# Capacity, Precision 5 Axis Motorized Parts Manipulator, Manually Controlled or Programmable • Ergonomically Designed Operator Control Console with Video Tape and Thermographic Recording Capabilities • Programmable Systems Controller • Philips Trained Operations Technicians This system allows you, the Customer, the ability to visually inspect the valves that are being manufactured in our Investment Casting facility, as they are in the manufacturing process. This service allows for the fastest delivery of project work and constant reassurance that the valves that are being supplied will meet or exceed your stringent specifications. Inspection can be done with actual X-RAY film, or with a REAL TIME X-RAY Video Tape of the Valves, which can be viewed on a VHS player at your facility. Back COPYRIGHT ©2003 CONBRACO IND., INC. – PRINTED IN U.S.A. Prev. Page | Next M-19 _____________________________________________________________CONVERSION FACTORS TO CONVERT _____INTO ____MULTIPLY BY TO CONVERT_____INTO _____MULTIPLY BY atmospheres atmospheres atmospheres atmospheres atmospheres atmospheres Bar bar bar bar Barrels-Oil BT Units BTU’s BTU’s BTU’s BTU’s BTU/Min BTU/min BTU/min BTU/min Centimeters cm cm Cms Mercury cms mercury cms mercury cms mercury cms mercury Cms/Second cms/sec cms/sec cms/sec cms/sec cms/sec Cms/Sec/Sec Cubic Cms Cu cms cu cms cu cms cu cms cu cms cu cms cu cms Cubic Feet cu ft cu ft cu ft cu ft cu ft cu ft cu ft Cu Ft/min cu ft/min cu ft/min cu ft/min cu ft/sec Cu Inches cu ins cu ins cu ins cu ins cu ins cu ins cu ins Cu Meters M-20 Back cms of mercury ft. of water (at 4°C) in. of mercury (at 0°C) kgs/sq cm kgs/sq meter pounds/sq. in. newtons/sq m atmospheres at (tech.) psi gals-oil kg-calories ft-lbs hp-hrs kgs-meters kw-hrs ft-lbs/sec hp kw watts inches meters mm atm ft water kgs/sq meter lbs/sq ft lbs/sq in ft/min ft/sec km/hr meters/min miles/hr miles/min ft/sec/sec cu ft cu in cu meters cu yds gals liters pints (liq) quarts (liq) cubic cms cu inches cu meters cu yds gals liters pints (liq) quarts (liq) cu cms/sec gals/sec liters/sec lbs water/min gals/min cc cu ft cu meters cu yds gals liters pints (liq) quarts (liq) cc 76.0 33.90 29.92 1.0333 10,332 14.70 105 0.9869 1.0197 14.504 42 0.2520 777.9 3.927 x 10-4 107.5 2.928 x 10-4 12.96 0.02356 0.01757 17.57 0.3937 0.01 10 0.01316 0.4461 136.0 27.85 0.1934 1.969 0.03281 0.036 0.6 0.02237 3.728 x 10-4 0.03281 3.531 x 10-5 6.102 x 10-2 10-6 1.308 x 10-6 2.642 x 10-4 10-3 2.113 x 10-3 1.057 x 10-3 2.832 x 104 1728 0.02832 0.03704 7.48052 28.32 59.84 29.92 472.0 0.1247 0.4720 62.43 448.831 16.39 5.787 x 10-4 1.639 x 10-5 2.143 x 10-5 4.329 x 10-3 1.639 x 10-2 0.03463 0.01732 104 cu M cu M cu M cu M cu M cu M cu M Cu Yards cu yds cu yds cu yds cu yds Decimeters Deg (Angle) degs (angle) degs (angle) Degrees/Sec degs/sec degs/sec Feet ft ft ft Ft of Water ft of w ft of w ft of w ft of w Feet/Min ft/min ft/min ft/min ft/min Ft/Sec/Sec ft/sec/sec Ft-Pounds ft lbs ft lbs ft lbs ft lbs Ft-lbs/Min ft-lbs/min ft-lbs/min ft-lbs/min ft-lbs/min Ft-Lbs/Sec ft-lbs/sec ft-lbs/sec ft-lbs/sec Gallons gals gals gals gals gals gals Gallons, Imp gallons, US Gals Water Gallons/Min gals/min gals/min Horse-Power hp hp COPYRIGHT ©2003 CONBRACO IND., INC. – PRINTED IN U.S.A. cu ft cu ins cu yds gals liters pints (liq) quarts (liq) cu cms cu ft cu ins cu meters gals meters minutes radians secs radians/sec revs/min revs/sec cms ins meters yds atms ins mercury kgs/sq cm lbs/sq ft lbs/sq in cms/sec ft/sec kms/hr meters/min miles/hr cms/sec/sec Meters/sec/sec BTU s hp-hrs kg-calories kg-meters kw-hrs BTUs/min ft-lbs/sec hp kg-calories/min kws BTUs/min hp kg-calories/min kws ccs cu ft cu ins cu meters liters pints (liq) quarts (liq) US gals imp gals lbs water cu ft/sec liters/sec cu ft/hr BTUs/min ft-lbs/min ft-lbs/sec Prev. Page | 35.31 61,023 1.308 264.2 103 2113 1057 7.646 x 105 27 46,656 0.7646 202.0 0.1 60 0.01745 3600 0.01745 0.1667 0.002778 30.48 12 0.3048 1/3 0.02950 0.8826 0.03048 62.32 0.4328 0.5080 0.01667 0.01829 0.3048 0.01136 30.48 0.3048 1.286 x 10-3 5.050 x 10-7 3.241 x 10-4 0.1383 3.766 x 10-7 1.286 x 10-3 0.01667 3.030 x 10-5 3.241 x 10-4 2.260 x 10-5 7.717 x 10-2 1.818 x 10-3 1.945 x 10-2 1.356 x 10-3 3785 0.1337 231 3.785 x 10-3 3.785 8 4 1.20095 0.83267 8.3304 2.228 x 10-3 0.06308 8.0208 42.44 33,000 550 Next CONVERSION FACTORS ______________________________________________________________ TO CONVERT _____INTO ____MULTIPLY BY TO CONVERT_____INTO _____MULTIPLY BY hp hp hp hp Hp-Hours hp-hrs hp-hrs hp-hrs hp-hrs Inches Inches Ins Mercury ins mercury ins mercury ins mercury ins mercury Ins of Water ins of w ins of w ins of w ins of w Kilograms kgs kgs kgs Kgs/Sq Cm kgs/sq cm kgs/sq cm kgs/sq cm kgs/sq cm Kilometers kms kms kms Kms/Hr kms/hr kms/hr kms/hr kms/hr Kms/Hr/Sec kms/hr/sec kms/hr/sec Kilowatts kws kws kws kws kws Kilowatt-Hrs kw-hrs kw-hrs kw-hrs kw-hrs Liters liters liters liters liters liters Liters/Min Meters meters meters meters Back hp (metric) kg-calories/min kws watts BTUs ft-lbs kg-calories kg-meters kw-hrs cms mms atms ft water kgs/sq cm lbs/sq ft lbs/sq in atms ins mercury kgs/sq cm lbs/sq ft lbs/sq in dynes lbs tons (short) grams atms ft water ins mercury lbs/sq ft lbs/sq in cms ft meters miles cms/sec ft/min ft/sec meters/min miles/hr cms/sec/sec ft/sec/sec Meters/sec/sec BTUs/min ft-lbs/min ft-lbs/sec hp kg-calories/min watts BTUs ft-lbs hp-hours kg-calories kg-meters ccs cu ft cu ins cu meters gals quarts (liq) gals/sec cms ft ins kms 1.014 10.70 0.7457 745.7 2547 1.98 x 106 641.7 2.737x105 0.7457 2.540 25.4 0.03342 1.133 0.03453 70.73 0.4912 0.002458 0.07355 0.002540 5.202 0.03613 980,665 2.205 1.102 x 10-3 1000 0.9678 32.81 28.96 2048 14.22 105 3281 103 0.6214 27.78 54.68 0.9113 16.67 0.6214 27.78 0.9113 0.2778 56.92 4.425 x 104 737.6 1.341 14.34 103 3415 2.655 x 106 1.341 860.5 3.671 x 105 103 0.03531 61.02 10-2 0.2642 1.057 4.403 x 10-3 100 3.281 39.37 10-3 meters meters/min meters/min meters/min meters/min meters/min Meters/Sec meters/sec meters/sec meters/sec meters/sec meters/sec Microns microns Miles/Hr miles/hr miles/hr miles/hr miles/hr Millimeters mms Minutes (Angle) Newton Ounces ozs. Ozs (Fluid) ozs. (fluid) Pounds lbs. lbs. lbs. lbs. Pounds/Inch Pounds/Foot Lbs of Water lbs of water lbs of water Lbs of Water/Min Pounds/Cu Ft Pounds/Cu In Pounds/Sq In lbs/sq in lbs/sq in lbs/sq in Radians Tons (Long) tons (long) tons (long) Tons (Short) tons (short) tons (short) tons (short) Watts watts watts watts watts watts Watts/Hours watts-hrs watts-hrs watts-hrs watts-hrs watts-hrs COPYRIGHT ©2003 CONBRACO IND., INC. – PRINTED IN U.S.A. mms cms/sec ft/min ft/sec kms/hr miles/hr ft/min ft/sec kms/hr kms/min miles/hr miles/min meters in cms/sec ft/min ft/sec kms/hr meters/min cms ins radians kgs lbs gram cu in liters ozs. kgs tons (short) newtons (N) gram newton-meters newton-meters cu ft cu in gals cu ft/sec lbs/cu in lbs/cu ft atms ft water in mercury kgs/sq cm degrees kgs lbs tons (short) kgs kps tons (long) tons (metric) BTUs/min ft-lbs/min ft-lbs/sec hp kg-calories/min kws BTUs ft-lbs hp-hrs kg-calories kg-meters kw-hrs 103 1.667 3.281 0.05468 0.06 0.03728 196.8 3.281 3.6 0.06 2.237 0.03728 10-6 39 x 10-6 44.70 88 1.467 1.609 26.82 0.1 0.03937 2.909 x 10-4 0.1020 0.0625 28.349527 1.805 0.02957 16 0.4536 0.0005 4.44 453.5924 0.113 1.356 0.01605 27.73 0.1204 2.679 x 10-4 5.787 x 10-4 1728 0.06804 2.311 2.036 0.07031 57.29578 1016 2240 1.12000 2000 907.18486 0.89287 0.90718 0.05692 44.26 0.7376 1.341 x 10-3 0.01434 10-3 3.415 2655 1.341 x 10-3 0.8605 367.1 10-3 Prev. Page | Next M-21