4 - Kawan Lama E-book

Transcription

04
AUTOMOTIVE
AUTOMOTIVE EQUIPMENT
EQUIPMENT
Air Conditioning for Automotive
Air conditioning equipment.....................................................134
Recovery, recycling, and recharge..........................................116
Refrigerant identifier...................................................................115
Refrigerant leak detector...........................................................115
Automotive Service Tool
Parts washer...................................................................................135
Timing gear puller........................................................................135
Universal ball joint puller...........................................................135
Automotive Tester
Pressure tester kit.........................................................................131
Battery Charger
Battery charger........................................................ 129 – 131, 146
Battery tester..................................................................................129
Maintenance battery charger 12V..........................................129
Battery Tester
Battery tester..................................................................................147
Body Repair
Body repair equipment..................................................113 – 114
Brake Fluid Tester
Brake fluid tester...........................................................................134
Cable Connectiion
Cable connection..........................................................................134
Cable Jumper
Cable jumper..................................................................................134
Dynamometer
Dynamometer....................................................................125 – 128
Engine Tune-up
Inductive digital timing light....................................................129
Timing light.....................................................................................129
Exhaust Extractor System
Exhaust extractor system...............................................111 – 112
Flashlight
Flashlight.........................................................................................149
Grease Dispenser
Grease dispenser...............................................................133 – 134
Hose Reel
Hose reel.................................................................................................
Hydraulic Lifting
Bottle jack........................................................................................138
Coil spring compressor...............................................................135
Engine crane...................................................................................135
Farm jack..........................................................................................137
Frame straightener.......................................................................136
Hydraulic body repair kit...........................................................135
Hydraulic garage jack......................................................138 – 139
Hydraulic jack.................................................................................137
Jack stand........................................................................................137
Motorcycle lift....................................................................140 – 141
Pneumatic end lift for truck......................................................140
Pneumatic hydraulic garage jack............................................139
Transmission jack..............................................................136 – 137
Lifting Equipment
Lifting equipment............................................................100 – 110
Single post lift..................................................................................91
Lubrication Dispenser
Oil dispenser...................................................................................132
Manual Lifting
Engine stand...................................................................................136
Motorcycle Repair Tool
Motorcycle repair tool....................................................142 – 144
Motorcycle Service Equipment
Motorcycle lift................................................................................122
Motorcycle tyre changer.................................................. 122, 141
Motorcycle wheel balancer............................................. 122, 141
Part Washer
Part washer.....................................................................................145
Pressure Sprayer
Pressure sprayer............................................................................133
Seat Creeper
Seat creeper....................................................................................145
Service and Tune-up Equipment
Accessory for motorcycle gas analyzer.................................118
ATF changer....................................................................................118
Four gas analyzer..........................................................................117
Injector cleaner and tester........................................................119
Scanner.................................................................................120 – 121
Testing Equipment
Test lane...............................................................................123 – 124
Tyre Service Equipment
Automatic tyre changer......................................................96 – 97
Laser wheel alignment.................................................................95
Tyre changer automatic...............................................................98
Tyre changer for industrial and mining..................................98
Tyre changer semi automatic.....................................................97
Wheel alignment............................................................................95
Wheel alignment 3D......................................................................96
Wheel alignment 8 sensor wireless..........................................95
Wheel balancer.......................................................................92 – 94
Wheel balancer for car and truck..............................................93
Wheel balancer for truck..............................................................94
Videoscope
Videoscope.....................................................................................148
Wall Mounted Oil Pump
Wall mounted oil pump kit.......................................................133
Wire Brush
Wire brush.......................................................................................146
From
QUALITY BRANDS :
GARAGE AND LIFTING EQUIPMENT
SINGLE POST LIFT
Pneumatic Hydraulic Single Post Lift
Data
Specification
Capacity (kg)
4000
Plunge Diameter (mm)
270
Rise (mm)
17/10
Adapter Reach
Minimum Front (mm)
397
Minimum Rear (mm)
397
Maximum Front (mm)
936
Maximum Rear (mm)
936
Recommended Bay Site (m)
3x7
*Minimum Compressor 3Hp for 1 unit Single Post
KW19-904
Order No
Type
KW1900513 KW19-513
KW1900904 KW19-904
KW19-513
www.kawanlama.com
Description
Single Post Lift, Pneumatic Hydraulic
4Ton Type S
Single Post Lift, Pneumatic Hydraulic
4Ton Type M
91
TYRE SERVICE EQUIPMENT
Wheel Balancer Standard KWB-402
Pliers to Attach The
Balance Wweight
Standard Lead Weight
Width Measure Scale
Shaft Positioning Cone
and Locking Wing Nut
Assembly
Features :
• Monochrome 7 segment display
• Manual data input
• Multi operator program
• Optimisation program
• Hidden weight mode program
• ALU-S program
• Read-out accuracy 1g-5g
Commercial Applications:
Workshop and tyreshop
Data
Max. Wheel Weight (kg)
Balancing Precision (gr)
Rim Diameter (Inch)
Rim Width (Inch)
Balancing Time (s)
Rated Voltage (V/Hz)
Motor Power (W)
Balancing Speed (rpm)
Working Noise (dB(A))
Temperatur (C)
Humidity (%)
Dimension (mm)
Weight (kg)
Order No.
LC0000015
4
Benefits :
•Easy to read the display
•Easy to operate
•Compact dimension
Specification
65
±2
10” - 22”
1.5”-18”
7
220/50
370
240
< 70
0°~50°
≤ 85%
1080x1095x1130
145
Type
KWB-402
Description
Digital Wheel Balancer
Wheel Balancer Professional KWB-503
3D SENSOR ARM
LED DISPLAY
Data
Diameter of Shaft (mm)
Balancing Accuracy
Wheel Data Acquisition
Rim Width (Inch)
Wheel Width Guard (Inch(mm))
Measurable Rim Diameter (Inch)
Max. Wheel Diameter with Guard
Max. Wheel Weight (lbs(kg))
Power Supply
Cycle Time
Order No.
LC0000290
92
Type
KWB-503
Specification
1.57” (40)
0.05 oz (1g)
Manual and Automatic
1.5-20”
21” (530)
8-26”
40” (1.000mm)
154(70)
230V/1Phase
7 Seconds (average 13”-16” wheel)
Description
Wheel Balancer with Arm 3D Sensor
Data
Specification
Power Supply
Air Pressure
Protection Class
Power Consumption (W)
Max. Rotating Speed (rpm)
3phase/380
0.4 - 0.8Pa
IP 54
260
180(car)
90(truck)
Average 814
Cycle Time (sec)
Measurement Ranges
Gauge Length (mm)
Rim Diameter (Inch)
Wheel Width (Inch)
Wheel Diameter (mm)
Wheel Weight (kg)
0.1 oz (car)
≤±10g
Error : ≤±1g
Order No
LC0000269
Type
KWB-1280
Description
Wheel Balancer For Trucks and Cars
Features :
• Dynamic mode
• Static mode
• Standard ALU1, ALU2, ALU3, mode
• ALUS mode
• OPT (Optimization) mode
• Truck/car measurement mode shift
• Unit conversion in different countries (areas) g/oz, mm/inch
• Self-calibration
• Guard protection
• Shelf-check error and diagnostics
• Computer controlled whell pneumatic elevation
• Chain protection of elevation process
• Pneumatic brake fixed start lock, and auto unlock for
measurement again
Wheel Balancer for Car and Truck KWB-1280
Noise (dB)
Net Weight (kg)
Working Environment (C)
10-300
10”-30”
1.5”-20”
<1200
<160kg
0.35 oz (truck)
≤70
350
Temperature : 20o~ 50o,
Humidity ≤85%
Wheel Balancer G2.117
Benefits :
• Easy to read the display
• Easy to operate
• Compact dimension
Data
Dimension (mm)
Rim Diameter (Inch)
Rim Width (Inch)
Read-Out Accuracy (g)
Cycle Time (s)
Rotation Speed (rpm)
Power Supply (V/Hz)
Order No
RV0000173
www.kawanlama.com
Type
G2. 117
Features :
• Monochrome graphic LCD display
• Manual data input
• ALU-S program
• Motorcycle program (optional)
• Self calibration procedure by user
Specification
450x450x926
10”-24”
1.5”-22”
65
1
7
<100
230/50-60
Description
Basic Wheel Balancer w/LCD
93
Features :
• Colour monitor TFT SVGA 17”
• Automatic data input
• Automatic stop
• Automatic ALU-S and PAXprogram
• 4 ALU programmes
• Split program
• Motorcycle program (optional)
• Self calibration procedure by user
Wheel Balancer G4.140H
Benefits :
• Easy to read the display
• Easy to operate
Data
Specification
Dimension (mm)
1300x1170x1858
Rim Diameter (Inch)
10”-26”
Rim Width (Inch)
1.5”-22”
70
1
Cycle Time (s)
4
6
<100
Power Supply (V/Hz)
230/50
Order No
Type
RV0000353
G4. 140H
Description
Elec. Wheel Balancer 17” Monitor, 3D
Graphics
Wheel Balancer for Trucks
Features :
•Monochrome or colour LCD display
• Tyre diameter 10” to 30”
• Tyre width 1.5” To 22”
• Wheel weight up to 200kg
• Read-out accuracy 5g for trucks, 1g for cars
Display of
GTL4.128H/HC
Display of
GTL2.120H/HC
GTL4.140H/HC
Data
GTL2.120H
GTL2.120HC
Rim Siameter (Inch)
Rim Width (Inch)
MaxWheel Weight (kg)
Cycle Time (s)
Power Supply (V/Hz)
Display (mm)
Standard Cones (mm)
94
Backlit Graphic
LCD Display 132 x40
For Light Trucks Ø
from 118 to 174
For Trucks Ø from
202 to 221 and 281
• Rotation speed 80rpm
• Automatic distance, automatic diameter
measurement, and automatic operation
(for GTL4.128 and GTL4.140)
• Pneumatic wheel Lift 200kg
Order No
Type
Description
RV0000354
GTL2.120H
Whl. Balancer f/ Light Trucks, 118 TO
174mm, Backlit LCD Display
RV0000355
GTL2.120HC
Whl. Balancer f/ Trucks, 202-221 and
281mm, Backlit LCD Display
RV0000356
GTL4.128H
174mm, Backlit Monochrome LCD
RV0000357
GTL4.128HC
281mm, Backlit Monochrome LCD
RV0000358
GTL4.140H
RV0000359
GTL4.140HC
GTL4.128H
GTL4.128HC
10”-30”
1.5”-22”
200
5 (PL)
1 (VL)
6
80
400V-50Hz-3ph
Backlit Monochrome Graphic LCD Display Flat
Screen 120 x90
For Light Trucks
For Trucks Ø from
Ø from 118 to 174
202 to 221 and 281
174mm, Colour Monitor 17”
281mm, Colour Monitor 17
GTL4.140H
GTL4.140HC
Color Monitor TFT SVGA 17”
For Light Trucks
Ø from 118 to 174
For Trucks Ø from
202 to 221 and 281
Laser Wheel Alignment R108L
Wheel Alignment TD 1780 BTH
Features :
• Wireless (Bluetooth) Communication
• 4 Heads, 8 CCD sensors
• Data bank vehicle 20.000 data
• Customer data bank
• Run out by moving the vehicle
Features :
•Simplicity
•Speed
•Accuracy
Benefits :
•Easy to use in all working areas
•Contemporary reading of three angles
•The calibration kit assures the accuracy and
precision of all operation
Data
Wheel Clamp (Inch)
Power
Head
Truntable
Steering Holder
Order No
RV0000016
Data
Dimension (mm)
Wheel Clamp (Inch)
Self Centering Lock Internal
(Inch)
Power
Printer
Specification
4 point 10”-17”
4 battery AA
2
2
2
Type
R-108L
Benefits :
• Bluetooth communication allows maximum mobility between different
working position
• 4 heads 8 CCD sensors measuring all chracteristic angles of both vehicle axles
• Vehicle data sheets to be filled local vehicle
• Customer data bank recording 20,000 jobs with search by customer
name or vehicle plate number
Description
Laser Wheel Alignment R 108L
Order No
RV0000176
Type
TD 1780 BTH
Specification
1480x1110x860
4 point 10”-19”
12” - 20.5”
220V 50/60Hz, 250watt
Colour printer
Description
Wheel Alignment 8 Sensor Wireless
(Bluetooth)
Wheel Alignment 8 Sensor Wireless X-631
Benefits :
• Measuring all characteristic angles of
both vehicle axles
•Vehicle data sheets to be filled local
vehicle
•Customer data bank recording
50.000 jobs with search by customer
name or vehicle plate number
•Lower car function
Data
Item                   
Front Total Toe-in
Front Toe-in
Front Camber
Caster 
Kingpin Inclination
Rear Total Toe-in
Rear Toe-in
Rear Camber
Thrust Angle
Order No
LC0000245
Universal Clamp
Sensor head
Program
www.kawanlama.com
Target Data
Type
X-631
Mechanical
Turntables
Features :
• 4 Heads,8 toe sensors with
wireless communication
• 20 degree CCD Camera
•6 meter wheelbase
•2.4 GHz data transfer
• Customer defined data bank
Specification
Precision                
± 2’ (± 0.04o)
± 1’ (±0.02o)
± 1’ (± 0.02o)
± 6’ (± 0.1o)
± 6’ (± 0.1o)
± 2’ (± 0.04o)
± 1’ (± 0.02o)
± 1’ (± 0.02o)
± 2’ (± 0.04o)
Range
± 40o
± 20o
± 8.0o
± 20o
± 20o
± 40o
± 20o
± 8.0o
± 5.0o
Description
Wheel Alignment 8 Sensor Radio Wireless
Universal clamp
aluminium kit
Placement
platform for
proble rods and
wheel clamps
Quick clamp
95
Wheel Alignment 3D KWA-300
Available in 2 type
(different pole height) :
• Use with scissor lift,
• Use without scissor lift
Features :
• 3D measurement
• 4 Heads, 4 cameras
• 4 metre wheel base
• Customer defined data bank
• Fast ethernet data transfer
Powerless target
Benefits :
•Wireless communication allows maximum mobility
between different working position
•4 heads sensors, 4 cameras measuring all chracteristic
angles of both vehicle axles
•Vehicle data sheets to be filled local vehicle
•Customer data bank recording 50,000 jobs with
search by customer name or vehicle plate number
High-precision
camera
Accurate wheel
clamp
4
Specification                 
Total Toe-in
Camber
Caster 
Kingpin Inclination
Precision
±0.03o
±0.03o
±0.06o
±0.06o
Maximal Wheelbase it can Measure
4000mm
Range
0~±20o
0~±20o
0~±25o
0~±25o
Order No
LC0000244
Type
KWA-300
Description
Wheel Alignment 3D
Semi Automatic Tyre Changer TWC-401NIC
Features :
•Semi-automatic
• Side swing mounting arm
• Pneumatic locking
Commercial Application:
Benefit :
•Easy to operate
Data
Working Pressure (bar)
Max. Wheel Width (mm)
Max. Wheel Diameter (mm)
Max. Rim Width (Inch)
Rim Clamping Dia. (outer) (Inch)
Rim Clamping Dia. (inner) (Inch)
Voltage (V/Hz)
Motor Power (kW)
Dimension (mm)
Weight (kg)
Order No
LC0000016
Type
TWC-401
Specification
8 -10bar
360mm
960mm
14”
10”-18”
13”-20”
AC 220/50
1.1
1020x810x1765
204
Description
Semi Automatic Tyre Changer
Automatic Tyre Changer TWC-502 NIC
Features :
• Automatic
• Tilt back mounting arm
Benefit :
•Easy to operate
96
Data
Max. Rim Width (Inch)
Rim Clamping Dia. (outer) (Inch)
Rim Clamping Dia. (inner) (Inch)
Bead Breaker Force (N)
Voltage (V/Hz)
Motor Power (kW)
Rpm of Turntable (rpm)
Torque of Turntable (Nm)
Dimension (mm)
Weight (kg)
Specification
8-10
420
1000
14”
10”-20”
13”-23”
≥18000
AC 220/50
1.1
6-8
1070
1020x810x1765
228
Order No
Type
Description
LC0000064
TWC-502NIC
Automatic Tyre Changer
Automatic Tyre Changer TWC-682RMB
Automatic Tyre Changer TWC-502 RMB
Level Bar
Features :
•Full automatic
•Tilt back mounting arm
•Pneumatic locking
•Built in assistance
Features :
• Tilt back arm
• Right supplementary arm
• 4 points assisting arm
• Adjustable jaws
• High volume bead blast fast
inflastion
• Tool box
• New design demount head
• Smoother operation
• Patent design for american market
Press tyre
Benefit :
•Easy to operate
Support the
lower beam
Level bar
Mount tyre
Support the lower beam
Data
Working pressure (bar)
Max. wheel width (mm)
Max. wheel diameter (mm)
Max. rim width (inch)
Rim clamping dia. (outer) (inch)
Rim clamping dia. (inner) (inch)
Bead breaker force (N)
Voltage (V/Hz)
Motor power (kW)
Rpm of turntable (rpm)
Torque of turntable (Nm)
Dimensions (mm)
Weight (kg)
Order No
LC0000087
Type
TWC-502 RMB
Specification
8 -10
420
1000
14”
10” - 20”
13” - 23”
≥18000
AC 220/50
1.1
6-8
1070
1350 x950 x1765
322
Description
Press tyre
Data
Working pressure (bar)
Mount tyre
Specification
8-10
Max. wheel width (mm)
350
Max. wheel diameter (mm)
1067
Rim clamping (outer)(Inch)
11” - 26”
Motor Power (kW)
Power Supply (V/phase)
Weight (kg)
Order No
-
1.1
220/ 1
320
Type
TWC-682 RMB
Description
Tyre Changer Semi Automatic G7240I.20
Features :
•Semi automatic
• Clamping range 10” - 20” (External)
• Self-centering chuck :2way rotation,
• High torque, High clamping force
(two operating pistons)
• Bead seater (tubeless inflator)
Benefits :
• Easy to operate.
• Compact dimension.
• Heavy duty structure to guarantee proper working condition at all times.
Data
Dimension (mm)
Self centering lock external (Inch)
Self centering lock internal (inch)
Operating pressure (Bar)
Motor (ph/V/kW)
Chuck rotation speed (rev/min)
Bead breaker pressure (kg)
Weight (kg)
Noise level (db)
Max. Tyre diameter (mm)
Max. Rim width (inch)
Order No
RV0000376
www.kawanlama.com
Type
G7240I.20
Specification
1834 x960 x1390
10” - 20”
12” - 22.5”
8 – 10
3/ 220/0.55
7.3
3000
203
<70
1030
12
Description
Tyre Changer Semi Automatic
97
Tyre Changer Automatic G7441IV.22
Features :
• Automatic
• Double rotation speed
• Clamping range 10”-22” (External)
• Bead seater (tubeless inflator)
• High capacity air tank for Tubeless inflate
• Self-centering chuck :2way rotation
High torque, High clamping force
(two operating pistons)
Data
Dimension (mm)
Self Centering Lock External (inch)
Self Centering Lock Internal (inch)
Operating Pressure (Bar)
Motor (ph/V/kW)
Chuck Rotation Speed (rev/min)
Bead Breaker Pressure (kg)
Weight (kg)
Noise Level (db)
Max. Tyre Diameter (mm)
Max. Rim Width (inch)
Max. Chuck Torque (nm)
Benefits :
•Easy to operate
•Compact dimension
•Heavy duty structure to guarantee
proper working condition at all
times
Order No
RV0000377
4
Type
G7441IV.22
Specification
1841x960x1678
11”-22”
13”-24.5”
8–10
3/220/1.1
6.5-13
3600
212
<70
1050
12
1200
Description
Tyre Changer Automatic
Tyre Changer for Industrial and Mining
Equipped with double mount demount
tool to operate on tube or tubeless tyres
Features for G96:
• Tyre-changer for commercial vehicles 12”-26”
• Double mount-demount tool for tube or tubeless tyres
• Control unit can be rotated by 120
Benefits :
• Easy to operate
• Heavy duty structure to guarantee proper working
condition at all times.
G96
Workshop industrial, mining and tyreshop
Tyre Changer for Industrial and Mining
Special Features for G108F :
Electro Brake
The electro-brake allows immediate stopping of the
rotation to avoid any damage to the tyre.
Tele-Hook
Thanks to the exclusive telescopic hook the tool no longer
needs to be rotated The constant control of the hook
enables the operator to carry out the most demanding
procedures with precision and safety
Orbital
G108F
98
The exclusive orbital movement (patent pending) of
the bead breaking arm saves both time and space: the
tool moves around the wheel, with no need to move the
carriage
G96
G9152.09
G9156.11
G9256.15SL
Chucking Unit Rotation Motor (kW)
Technical Data
2.2
1.3 - 1.85
1.3 - 1.85
1.3 - 1.85
1.3-1.85
Hydraulic Drive Unit Motor (kW)
0.75
2.2
2.2
1.85-2.5
1.85-2.5
Bead Breakerforce (N)
G9256.15
2000
3200
3200
3200
3200
12”-26”
11”-37”
11”-42”
11”-42”
11”-42”
Clamping Torque (Nm)
5000
5000
5300
5300
Min. Clamping Height From Floor (mm)
330
330
330
330
Rim Diameter (inch)
Min. Clamping Hole (mm)
110
90
90
90
90
1480
2350
2350
2450
2450
850
Max. Wheel Weight (Kg)
950
1100
1500
1500
1200
1200
1200
1200
4/8
4/8
4/8
4/8
No
No
Yes
Yes
Carriage Double Speed
No
Elecktro Brake
No
Weight of Equipment (Kg)
460
No
Stand Alone
Column
Aerial Arm
(Rotation on
Console)
Controls
Stand by Function
Tool Movement
Yes
Yes
No
1150
1150
Aerial Arm
(Rotation on
Console)
Bluetooth
Console
Bluetooth
Console
No
No
No
Yes
Yes
Manual
Manual
Manual
Automatic
Automatic
Tool Lifting
Manual
Manual
Manual
Manual
Automatic
Tool Rotation
Manual
Manual
Manual
Quick-Fit
Automatic
Base Frame
Dimension/Size (LxWxH)(mm)
No
No
No
Yes
Yes
2135x1605
x1280
2450x2200
x1620
2520x2270
x1685
2839x2214
x1874
2839x2214
x1874
11”-52”
11”-56”
11”-56”
11”-56”
Rim Diameter with G108A12
(Max. Clamping)
Technical Data
G10156.15M
G10156.15
G10360.15
G10360.17
Chucking Unit Rotation Motor (kW)
Hydraulic Drive Unit Motor (kW)
Bead Breakerforce (N)
Rim Diameter (inch)
Clamping Torque (Nm)
Min. Clamping Height From Floor
(mm)
Min. Clamping Hole (mm)
1.3-1.85
2.6
34000
11”-42”
5300
1.3-1.85
2.6
34000
11”-42”
5300
1.5-2.2
1.85-2.5
37000
11”-42”
5800
1.5-2.2
1.85-2.5
37000
11”-42”
5800
330
330
330
330
90
2550
90
2550
90
2700
90
2700
1500
1500
1500
1750
1700
1700
2300
2300
4/8
No
Optional
1070
Aerial Arm (Rotation on Console)
No
4/8
No
Optional
1150
Bluetooth
Console
Yes
4/8
Yes
Yes
1400
Bluetooth
Console
Yes
4/8
Yes
Yes
1572
Bluetooth
Console
Yes
Manual
Manual
Manual
Yes
2839x2214x1874
Automatic
Automatic
Automatic
Yes
2839x2214x1874
11”-56”
11”-56”
Carriage Double Speed
Elecktro Brake
Weight of Equipment (kg)
Controls
Stand by Function
Tool Movement
Tool Lifting
Tool Rotation
Base Frame
Dimension/Size (LxWxH)(mm)
Rim Diameter with
G108A12(MaxClamping)
Order No
RV0000128
RV0000360
RV0000361
RV0000362
RV0000363
RV0000334
Type
G96
G9152.09
G9156.11
G10156.15M
G10156.15
G10360.17
www.kawanlama.com
Claws
The stepped claws allow 80 mm
internal diameter clamping with
no need of accessories
Automatic
Synodix
Automatic
Synodix
Automatic
Synodix
Yes
Yes
2120x1860x2130 2120x1860x2130
11”-60”
11”-60”
Description
Truck Tyre Changer 12”-26”
Truck Tyre Changer 11”-42” Auto Movement and Rotation
Truck Tyre Changer 11”-58” Auto Movement and Rotation
99
LIFTING EQUIPMENT
LIFTING EQUIPMENT
2-Post Lift Electro Hydraulic 3.5T with Base TLT235SBA (E)
4
Blue Colour
Available
Order No
Type
LC0000144
TLT 235 SBA(E)
Features :
• Dual Hydraulic Cylinder
• Finishing with powder coating system
• Low noise level and width working area
• Safety electromagnetic locking system
Benefits :
• Safety electromagnetic locking
• Dual hydraulic cylinder pistons
• Control boxand international standard hydraulic power pack
• Force of powder paint finish
• Protected and concealed cables and oil pipes
• International standard specification
• Single motor and transmission to the opposite post by means of a steel
cable
Description
Electro Hydraulic Two Post Lift 3.5Ton
with Big Base
Data
Lifting Capacity (Ton)
Max. Lifting Height (mm)
Lifting Time (sec)
Lowering Time (sec)
Power Supply (V/ph)
Motor Power (kW)
Drive Through Width (mm)
Lowest Height (mm)
Overall Weight (kg)
Overall Height (mm)
Overall Width (mm)
Working Noise (dB(A))
Working Pressure MPa
Specification
3.5
1950
50
40
AC 380/3
2.2
2486
120
735
2900
3400
≤80
16
2-Post Lift Electro Hydraulic 4T Clear Floor TLT240SCA
Features :
• Dual Hydraulic Cylinder
• Finishing with powder coating system
• Low noise level and width working area
• Safety electromagnetic locking system
Blue Colour
Available
Benefits :
• Safety electromagnetic locking
• Dual hydraulic cylinder pistons
• Control boxand international standard hydraulic power pack
• Single motor and transmission to the opposite post by means of a steel
cable
Order No
Type
LC0000014
TLT 240 SCA
100
Description
Electro Hydraulic Two Post Lift
4T Baseless
Data
Lifting Time (sec)
Lowering Time (sec)
Power Supply (V/ph)
Motor Power (kW)
Lowest Height (mm)
Overall Weight (kg)
Overall Height (mm)
Overall Width (mm)
Working Noise (db (A))
Working Pressure (MPa)
Specification
4
1950
50
40
AC 380/3
2.2
2486
100
735
3840
3420
≤ 80
18
LIFTING EQUIPMENT
LIFTING EQUIPMENT
Electro Hydraulic Two Post Lift KPH370.32 and KPH370.42K
KPH 370.32
KPH 370.42K
Features :
• Three - stage short arms for asymmetric lifting of large vehicles. Min. pad
height 90mm
• Perfect synchronization between carriages regardless of load
distribution
• Equipped with safety valve to prevent overloading and in case of
hydraulic pipe fracture
• Self-controlled lowering speed
• Baseless lift, allows easy access into the working area
Specification
• Synchronization cables grant the levelling of the two carriages
• Each column features a maintenance-free lifting cylinder
• Adjustable height
• Mechanical safety latch with automatic engagement ensuring maximum safety when lift is in standing position
• Automatic arm locking during lifting and automatic unlocking when the arm reaches the floorself-locking conical design
• Very low pad, adjustable height
KPH370.32
KPH370.42K
Lifting Capacity (kg)
3200
4200
2000
2005
Lifting Time (sec)
50
50
Lowering Time (sec)
40
40
Power Supply (V/ph)
AC 380/3
AC 380/3
2.2
2.2
2300
2420
90
95
Motor Power (kW)
Lowest Height (mm)
Overall Weight (kg)
735
735
Overall Height (mm)
4175
4175
Overall Width (mm)
3286
3406
Order No
RV0000364
RV0000365
www.kawanlama.com
Type
KPH370.32
KPH370.42K
Description
Electro Hydraulic 2 Post Lift 3.2T Baseless
Electro Hydraulic 2 Post Lift 4.2T Baseless
101
LIFTING EQUIPMENT
LIFTING EQUIPMENT
Electro Mechanic Two Post Lift KPN250 LIKA and LIKT
Extra Long
Arms
HEAVY DUTY
5000 kg
Features KPN250LIKA :
• High capacity to meet any lifting needs
• Model equipped with four long arms ideal
to lift long wheel-base vans and easy lifting of cars
Features for KPN250LIKT :
• High capacity to meet any lifting needs
• Model equipped with four extra long three stage arms:
ideal to lift long wheel-base vans like Mercedes Sprinter and
VW Crafter
4
Specification
KPN250LIKA
Lifting Capacity (kg)
Lifting Time (sec)
KPN250LIKT
5000
1980
2030
50
50
Lowering Time (sec)
40
40
Power Supply (V/ph)
AC 380/3
AC 380/3
Motor Power (kW) (2x)
3,5
3,5
2740
3000
Lowest Height (mm)
Overall Weight (kg)
120
1620
Overall Height (mm)
Overall Width (mm)
Working Pressure (Mpa)
102
Order No
Type
RV0000366
KPN250LIKA
RV0000367
KPN250LIKT
1645
4950
3500
4080
18
18
Description
Electro Mechanic 2 Post Lift, 5T
Heavy Duty
Electro Mechanic 2 Post Lift, 5T Extra
Long Arms
LIFTING EQUIPMENT
LIFTING EQUIPMENT
4-Post Lift Hydarulic 4T for Service/for Alignmet TLT440/TLT440W
Pit Jack for Alignment
Data
Lifting Capacity (ton)
Turntable for wheel
alignment
Lifting Time (sec)
Scissor lifting
Features :
• Designed based on the international standard, meeting the demand of
the garage and workshop
• Driven by hydraulic cylinder in stable lifting and lowering
• Offering full-range mechanical safety protection by using the safety
block
• Connected by using four steel cables; forced synchronized movement of
the lift in order to effectively prevent the sloping of the vehicles
• Equipped with rolling jack, turtable and sideslip, suitable for wheel
alignment (440W)
• The minimum lifting height is 170mm
• Digital control boxand international standard hydraulic power pack
• Cable break protection, safety locking mechanism, overload protection
and over current protection, pipe rupture protection
www.kawanlama.com
Specification
4.0
1900
60
Lowering Time (sec)
20 - 40
Power Supply (V/ph)
AC 380/3
Passing Width (mm)
3000
Platform Length (mm)
4555
Platform Width (mm)
500
Overall Width (mm)
3445
Overall Length (mm)
5025
Overall Height (mm)
2172
Lowest Lifting Height
170/220mm(440W)
Weight (kg)
1170
Order No
Type
LC0000092
TLT 440 W
LC0000097
TLT 440
Description
Electro Hydraulic Four Post Lift 4 Ton for
Wheel Alignment,
Electro Hydraulic Four Post Lift 4 Ton for
Service
103
LIFTING EQUIPMENT
Electro Hydraulic Four Post Lift 3.5T for Service
LIFTING EQUIPMENT
Features :
• The hydraulic cylinder is located inside the fixed
platform and is thus perfectly protected
• High-resistant, galvanised and pre-stretched metal
cables
• Large-diameter pulleys with self-lubricating and
maintenance-free bushes
• Adjustable platform to accommodate different
vehicle tracks and optimised access to vehicle
underside
• Automatic anti-toe trap alarm during final stages of
lift descent
• Mechanical, electrical and hydraulic safety devices
in compliance with the prevailing standard for CE
marking
• For service lifting only
Benefits :
• Helpful equipment for car maintenance
• Optimized access to vehicle underside
• CE approved lift with low voltage control
• Automatic mechanical back-up safety device, with
pneumatic release
• Easy maintenance
4
Order No
Type
RV0000011
RAV 4350
Description
Electro Hydraulic Four Post Lift 3.5T
for Service
Electro Hydraulic Four Post Lift 3.5T for Wheel Alignment
Data
Motor
Noise Level (dB)
Max. Height (mm)
Min. Height (mm)
Capacity (kg)
Overall Height (mm)
Overall Width (mm)
Passing Width (mm)
Overall Length (nm)
Specification
3ph.400V;50HZ.;2.6kW
70
1905
150
3500
2614
3015
2120
5040
Benefits :
• Optimized access to vehicle underside
• Automatic mechanical back-up safety device,
with pneumatic release
Features :
• The hydraulic cylinder is located inside the fixed platform and is thus
perfectly protected
• High-resistant, galvanised and pre-stretched metal cables
• Large-diameter pulleys with self-lubricating and maintenance-free
bushes
• Adjustable platform to accommodate different vehicle tracks and
optimised access to vehicle underside
• Automatic anti-toe trap alarm during final stages of lift descent
• Mechanical, electrical and hydraulic safety devices in compliance with the
prevailing standard for CE marking
• For wheel alignment only
104
Data
Motor
Noise Level (dB)
Max. Height (mm)
Min. Height (mm)
Capacity (kg)
Overall Height (mm)
Overall Width (mm)
Passing Width (mm)
Overall Length ( nm)
Order No
Type
RV0000258
RAV 4352
Specification
3ph.400V;50HZ.;2.6kW
70
1915
160
3500
2614
3165
2270
5190
Description
Electro Hydraulic Four Post Lift 3.5T
for Wheel Alignment
Low Profile Scissor Lift for Service TLT632AF
Twin Scissors Lift for Service TLT630A
On - Floor
Installation
In - Ground
Installation
Features :
• Advanced design, compact layout, original shape and long lifespan
• Hydraulic system keeps both platforms at level position
• Mechanical protection device throughout the travel distance provides
safety and simple operations
• Height limit system keeps the lift from being damaged
• Maintenance-free bearing with auto lubrication offers a long lifespan
• Surface-mounted or ditch-mounted installation options
Specification
Lifting Time (sec)
Lowering Time (sec)
Power Supply
Hydraulic Pressure (Mpa)
Pneumatic Pressure (kg/cm²)
Synchronization Precision (mm)
Height Difference (mm)
Overall Weight (kg)
Motor (kW)
Platform Size (mm)
Order No.
LC0000145
LC0000249
Type
TLT630A
TLT632AF
TLT630A
3.0
2000
50
20
AC 380V 3ph
25
5
40
5
630
2.2
1580 x520
Description
Twin Scissors lift for Service 3T
Low Profile Scissor Lift for Service 3.2T
Double Scissor Lift for Wheel Alignment TLT830W
Type
LC0000110
TLT830W
Description
Hydraulic Double Scissor Lift
for Alignment 3T
www.kawanlama.com
TLT632AF
3.2
2000
100
2.2
28
5
6 (Minimum)
1460 x610 2060 x610
Platform Size (mm)
(with Extension)
Power (V/Hz)
380/50
Overall Weight (kg)
820
Work Noise (db (A))
≤70
Lowering Time (sec)
≥20
Lifting Time (sec)
≤60
Synchronization (mm)
≤40
≤8
Electrical Control Safety Lock and Lowering
Features :
• Hydraulic synchronization system keeps the two platforms levels all the same
time
• Height limit mechanism prevents the lift and vehicles from getting damaged
• The main cylinder and the cylinder of the secondary scissor are equipped with
safety device that can be unlocked pneumatcally. This guarantees exact wheel
alignment measuring and a high degree of safety at the working area
• Integrated sidslip plates that can be locked pneumatically are the basis for the
effortless wheel alignment measuring
• Equipped with mechanical turntables for wheel alignment
• Manitenance-free bearings with automatic lubrication ensure a long lifespan
• Surface-mounted or ditch-mounted installation options
IN GROUND or
ON FLOOR
INSTALLATION
Order No.
Specification
Capacity (Ton)
Lifting Height (mm)
Minimum Height (mm)
Motor (kW)
Air Pressure (bar)
Specification
Lifting Height (mm)
Lifting Height (Second Stage) (mm)
Lifting Time (sec)
Lowering Time (sec)
Motor (kW)
Power Supply
Synchronization Precision (mm)
Platform Size (mm)
Overall Weight (kg)
TLT632AF
3.0
1900
450
50
20
2.2
AC 380V/50Hz/3ph
max. 28
5
40
5
4000 x550
2050
105
LIFTING EQUIPMENT
LIFTING EQUIPMENT
LIFTING EQUIPMENT
In Ground Electro Hydraulic Scissor Lift RAV 509IF
LIFTING EQUIPMENT
In - Ground
Installation
Features :
• Capacity 3.5 T
• Hydraulic levelling system by means of a patented
synchronisation device assures constantly level lifting
platform regardless of weight distribution
• CE approved lift with low voltage controls
• No cross rails or torsion bars between lifting platform (for
maximum accessibility in the working area)
• The best solution for a rational workshop :
- Space saving when lift is all raised
- Completely free floor space when lift is fully lowered
Benefits :
• Maximum accessibility in the working area
• Mechanical locking device and pneumatic release, for
maximum safety
Data
4
Order No
RV0000046
Type
RAV 509IF
Description
In Ground Electro Hydraulic Scissor Lift 3.5T
Specification
2.6kW; 50Hz.;
Motor Power
3Phase
Rise Time (sec)
41
Descent Time (sec)
41
Noise Level (dB)
70
Wide of Platform (mm)
545
Length of Platform (mm)
1610
Completed with Buzzer Switch for Turning Down Limit
Warning
1825
Weight (kg)
815
Low Profile Electro Hydraulic Scissor Lift RAV 520L
On - Floor
Installation
Features :
• Capacity 3.2 T
• Hydraulic levelling system by means of a patented synchronisation device
assures constantly level lifting platform regardless of weight distribution
• CE approved lift with low voltage controls
• No cross rails or torsion bars between lifting platform (for maximum
accessibility in the working area)
• The best solution for a rational workshop :
- Space saving when lift is all raised
- Completely free floor space when lift is fully lowered
Benefits :
• Mechanical locking device and pneumatic release, for
maximum safety
• Low height platform only 95mm
Order No
RV0000036
106
Type
RAV 520L
Description
Low Profile Electro Hydraulic Scissor Lift
Data
Specification
Motor Power
2.6kW; 50Hz.; 3Phase
Rise Time (sec)
35
Descent Time (sec)
30
Noise Level (dB)
70
Wide of Platform (mm)
610
Length of Platform (mm)
1420
Length of Platform with
1950
Extension(mm)
Completed with Buzzer Switch for Turning Down Limit Warning
Max. High Limit (mm)
1900
Weight (kg)
735
LIFTING EQUIPMENT
LIFTING EQUIPMENT
Electro Hydraulic Scissor Lift RAV 635.2/I (Wheel Alignment)
Electro Hydraulic Scissor Lift RAV 635.1/I (Service)
le from
Availab ons
6
o
3t T
y
Capacit
le from
Availab ons
3 to 6 T
ty
Capaci
Features :
perfectly protected
bushes.
• Mechanical, electrical and hydraulic safety devices in compliance with the
prevailing standard for CE marking
• For service lifting only
Features :
perfectly protected
bushes
• Mechanical, electrical and hydraulic safety devices in compliance with
the prevailing standard for CE marking
• For wheel alignment only
Benefits :
• Mechanical locking device and pneumatic release, for maximum safety
Benefits :
• Mechanical locking device and pneumatic release, for maximum safety
RAV xxxI
Recessed version
(installation in-ground)
Specification
Motor Power
Noise Level (Db)
Lifting Time (sec)
Lowering Time (sec)
Max. Height (mm)
Min. Height (mm)
Platform Width (mm)
Total Length (mm)
Total Width (mm)
Weight (kg)
Capacity (kg)
RAV xxxSI
Versions with
wheel free lift
RAV xxxSI
Versions with
wheel free lift
RAV xxxI
Recessed version
(installation in-ground)
RAV 635.1
RAV 635.2
3ph/400V; 50Hz.; 2.6kW
70
34
40
26
31
1850
265
4600
615
6110
2100
1450
1700
3500
www.kawanlama.com
Order No
Type
RV0000259
RAV 635.1/I
RV0000260
RAV 635.2/I
Description
Electro Hydraulic Scissor Lift 3.5 T for
Service
Electro Hydraulic Scissor Lift 3.5T for
Wheel Alignment
107
LIFTING EQUIPMENT
LIFTING EQUIPMENT
Electro Hydraulic Four Post Lift for Service (Truck)
4
Features :
• Capacity 6.5Tons and 8Tons
• For service and maintenance use
• Automatic mechanical back-up safety devices with pneumatic release
• Mechanical, electrical and hydraulic safety devices in compliance with the CE standard
• Hydraulic cylinder perfectly protected inside the fixed platform
bushes
• Adjustable platform to accomodate different vehicle tracks and
Specification
Motor Power
Lifting Time (sec)
Lowering Time (sec)
Weight (kg)
Total Height (mm)
Total Length (mm)
Total Width (mm)
Specification
Platform Width (mm)
Passing Width (mm)
Noise Level (dB)
Max. Height (mm)
Min. Height (mm)
Capacity (kg)
RAV 4650
RAV 4800
3ph/400V; 50Hz.; 2.6kW
75
60
1390
2560
6100
68010
3990
5000
5844
Order No
Type
RV0000368
RAV 4650
RV0000369
RAV 4800
Electro Mechanic Four Post Lift for Service (Truck)
RAV 4650
500
RAV 4800
650
3300
75
1950
200
6500
8000
Description
Electro hydraulic 4 Post Lift f/ Service
Trucks 6.5T
Electro hydraulic 4 Post Lift f/ Service
Trucks 8T
Features :
• Capacity 12, 14, 20 and 24Tons
• For Service and Maintenance use
• Two lifting screws in each column
• Motor protection by thermal relay is provided to prevent burning out in
case of overloading or lack of one phase
• Safety micro-switch in case of main-nut failure.
• Mechanical safety stop
• Upper and lower limit switches
• Automatic lubrication of main and safety nuts and spindles is achieved by
a plunger pump, one in each column, which ensures positive lubrication
every time the lift is raised this ensuring long life and smooth running
• Can be twinned; synchronised, therefore with the two lift platforms
working at the same height
Technical data
Capacity (kg)
RAV 442E
RAV 442NE
RAV 440E
RAV 440NE
12000
14000
20000
24000
Motor Power
2 x4 kW/3ph/50Hz
4 x4 kW/3ph/50Hz
Weight (kg)
3070
4170
3110
7992
4200
8000
Platform Width (mm)
700
Lifting Time (sec)
120
Lowering Time (sec)
120
Order No
Type
Min. Platform Height (mm)
275
RV0000370
RAV 442E
RV0000371
RAV 442NE
RV0000372
RAV 440E
RV0000373
RAV 440NE
Max. Platform Height (mm)
1850
1610
Total Length (mm)
9074
9100
Total Width (mm)
3852
3690
Total Height (mm)
2202
1950
Passing Width (mm)
3117
3100
108
Description
Electro Mechanic 4 Post Lift
f/Service Trucks 12T
f/ Service Trucks 24T
LIFTING EQUIPMENT
LIFTING EQUIPMENT
Electro Hydraulic Scissor Lift for Servive (Truck)
Features :
• Capacity 9, 13, 18, 22.5, 33, 45 and 55 Tons
• For Service and Maintenance use
• Space saving when lift is raised
• Obstacle free floor space when lift is fully lowered
• No cross rails or torsion Bars between lifting platforms (for maximum
accessibility in the working area)
• Mechanical locking device with automatic engagement and pneumatic
release, ensuring maximum safety when lift is in standing position
• Start-up pistons to minimize stress in the early stage of lifting
• All pivot points made with self lubricating bushings for long life
• Can be twinned; synchronised, therefore with the two lift platforms
working at the same height
Technical Data
Capacity (kg)
RAV 709 I
RAV 713 I
RAV 718 I
RAV 725 NI
RAV 733 I
9000
13000
18000
22500
33000
7.3
7.5
5500
5850
5900
Motor (kw)
3.5
Weight (kg)
5000
H (mm)
RAV 745 I
100
9.2
6300
9750
9750
1575
550
Lifting Time (sec)
1050
7000
1450
2000
64
8000
9000
13000
16200
9200
13200
16400
880
6200
7200
8200
Total Width (mm)
2810
Noise Level (Db)
70
Type
RAV 709 I
RAV 713 I
RAV 718 I
RAV 725 NI
RAV 733 I
12500
66
Platform Width (mm)
Total Length (mm)
1450
56
6000
10000
1680
1550
60
Lowering Time (sec)
RAV 755 IL
55000
2040
1595
L (mm)
RAV 755 I
45000
1935
I (mm)
Order No
RV0000378
RV0000349
RV0000379
RV0000380
RV0000381
RAV 745 IHD
Description
Electro-hydraulic Scissorlift 9T, 6000mm Runway
Electro-hydraulic Scissorlift 22.5T, 8000mm Runway
www.kawanlama.com
Order No
RV0000382
RV0000383
RV0000384
RV0000385
Type
RAV 745 IHD
RAV 745 I
RAV 755 I
RAV 755 IL
Description
109
LIFTING EQUIPMENT
GARAGE EQUIPMENT
LIFTING EQUIPMENT
Electro Mechanic Mobile Column Lift for Service ( Truck and Bus )
Features :
• Capacity 3, 4, 5.5, 6.5, 8.5 and 10 Tons per Column
• For service and maintenance use
• Moveable column and possibility of setting a different height between
pairs of columns while retaining the subsequent control level synchronization
• Large and solid base for maximum stability under load
• Lifting spindles in rolled steel with bronze main and safety nuts
• Mechanical and electrical safety devices comply with European Safety
Regulations
• Cut-out of lifting operation in case of wear of main nut
• Thermal protection against overload of motors
• Emergency stop button with self retainer on all columns
4
Dimensions (mm)
Technical
Data
RAV 210
RAV 220
A
-
1160
1110
1145
1132
1756
-
-
-
122
F
110
RAV 270
1800
E
RAV 210
3000
3
6kW-19A
6kW-11A
410
360
70”
1.200
900
580
RAV 260
1100
C
Technical Data
Capacity per Column (kg)
Motor (kW)
Required Mains ( 230v/50Hz)
power per Column (400v/50Hz)
Master Column Weight (kg)
Slave Column Weight (kg)
Rise Time
Maximum Tyre Diameter (mm)
Minimum Tyre Diameter (mm)
Minimum Rim Diameter (mm)
RAV 240
1100
B
D
RAV 230
195
153
550
190
530
525
G
515
H
2705
2720
2740
I
390
295
290
L
345
455
315
M
840
N
576
RAV 220
4000
3.5
6.5kW-22A
6.5kW-12.5A
430
380
70”
1.200
900
580
RAV 230
5500
4
7.5kW-26A
7.5kW-15A
450
400
110”
1.200
900
580
RAV 240
6500
2.4
5.5kW-18.5A
5.5kW-10.5A
473
455
135”
1.200
900
580
RAV 260
8500
3.7
6kW-20A
6kW-11.5A
508
490
135”
1.200
900
580
RAV 270
10000
3.7
6.5kW-22A
6kW-12.5A
650
630
180”
1.200
900
580
EXHAUST EXTRACTOR SYSTEM
Trotter - S (Portable Exhaust Extractor)
TRO.100S-TUBO
10mt
Ø 150mm
TRO.150S-TUBO
10mt
Ø 150mm
Trotter-100/S
1900m3/h
1HP
1117c.f.m.
0,75Kw
Trotter-150/S
2800m3/h
1,5HP
1646c.f.m.
1,15Kw
Trotter is : Mobile fan with nozzle mounted on adjustable
rod for exhaust gas extraction from the working area.
Trotter 100/S
Trotter 150/S
AR (System Spring driven hose reel for exhaust extraction)
Spring driven hose reel for exhaust extraction from
motorbikes and small cars. Suitable to be wall or ceiling
mounted
AR-75/7.5D
75mm³
7,5 mt - 25 ft
200° C - 392° F
AFT-75
-
-
-
-
BGT-75/140
-
BGT-75/140
-
AR-75/10D
75mm³
10 mt - 32 ft
200° C - 392° F
75mm³
7,5 mt - 25 ft
200° C - 392° F
AFT-75
AR-75/7PB-Comp
AFT-75
AR-75/10PB-Comp
75mm³
10 mt - 32 ft
200° C - 392° F
Mod
AR-75/7
AR-75/10
A(mm)
600
600
BØ(mm)
75
75
AFT-75
CØ(mm)
350
350
www.kawanlama.com
D(mm)
600
600
E(mm)
709
709
ailable
Also Av and
ck
for Tru
r
hauste
Bus Ex
FØ(mm)
120
120
G(mm)
639
639
H(mm)
40
40
I(mm)
246
246
L(mm)
10
10
MØ(mm)
540
540
kg
43
46
111
Ecosystem - B (Complete exhaust extraction system with aluminium track ETK
and sliding carriages)
ECOSYS-B/1
ECOSYS-B-6/1
6mt - 20ft
1
7,5mt - 25ft
200°C - 392°F
BGT-100/140
1HP - 0,75kW
3
BGT-100/140
1HP - 0,75kW
4
BGT-100/140
1HP - 0,75kW
5
BGT-100/140
1HP - 0,75kW
6
BGT-100/140
1HP - 0,75kW
7
BGT-100/140
1HP - 0,75kW
8
ECOSYS-B-9/1
9mt - 30ft
1
7,5mt - 25ft
200°C - 392°F
ECOSYS-B-12/1
12mt - 40ft
1
7,5mt - 25ft
200°C - 392°F
ECOSYS-B-15/1
15mt - 50ft
1
7,5mt - 25ft
200°C - 392°F
ECOSYS-B-18/1
18mt - 59ft
1
7,5mt - 25ft
200°C - 392°F
Ø100mm-4”
ECOSYS-B-21/1
21mt - 69ft
1
7,5mt - 25ft
200°C - 392°F
Optional :
Complete exhaust extraction system with aluminium track ETK and sliding
carriages. Fan and predisposition for sliding fixing point are included.
4
BL-A
ailable
Also Av EM-A
T
S
ECOSY STEMY
S
O
C
and E
CESETK-100/7Base
ECOSYS-B/2
ECOSYS-B-6/1
6mt - 20ft
2
7,5mt - 25ft
200°C - 392°F
BGT-100/140
1,5HP - 1,1kW
3
BGT-100/140
1,5HP - 1,1kW
4
BGT-100/140
1,5HP - 1,1kW
5
BGT-100/140
1,5HP - 1,1kW
6
BGT-100/140
1,5HP - 1,1kW
7
BGT-100/140
1,5HP - 1,1kW
8
ECOSYS-B-9/1
9mt - 30ft
2
7,5mt - 25ft
200°C - 392°F
ECOSYS-B-12/1
12mt - 40ft
2
7,5mt - 25ft
200°C - 392°F
ECOSYS-B-15/1
15mt - 50ft
2
7,5mt - 25ft
200°C - 392°F
ECOSYS-B-18/1
18mt - 59ft
2
7,5mt - 25ft
200°C - 392°F
ECOSYS-B-21/1
21mt - 69ft
112
2
7,5mt - 25ft
200°C - 392°F
BODY REPAIR EQUIPMENT
Spray Booth Double Blower 2 x4kW + 1x5.5kW
Features :
• So thick flame-resistant and heat-preserving board for the body structure
made by sandwiching two sheets of coloured steel and one piece of eps
• Automatically paint at constant temperature which is above 18 degree
celsius in winter
• Components produces by standards thus easy assembly and durability
• Paint with even wind being intake and exhausted ; bake at constant
temperature
• Philips light hence as shadow-free environment with a illuminance up to
800lux
• Use galvanize steel for body structure and rivet for fixing the filters to
reduce the cost
• Heat exchanger of stainless-steel and of scientific design insures it only
takes several minutes to reach the preset temperature
• Specially designed ventilator feature large volume and low noise
• Anti-over pressure device that can automatically open the personal door
when over pressure is sensed
• Italian riello burner
Benefits :
• Double blower to make perfect painting
• Emergency door
• High quality material
• Side lamp for good lighting in side booth
ailable
Also Av th for
oo
Spray B d Bus
n
Truck a
Body repair workshop
Spray Booth Double Blower 2 x4kW + 1x5.5kW
Data
Outside Dimension (mm)
Inside Dimension (mm)
Door Width
Intake Capacity (m³/hour)
Intake Power (kW)
Type of Inlet Fan
First Filter for Inlet Side
Secondary Filter for Inlet Side
Ceiling Frame Material
Exhaust Capacity (m³/hour)
Exhaust Power (kW)
Type of Exhaust fan
First Filter for Outlet Side
Secondary Filter for Outlet Side
Specification
7000 x5560 x3430
6900 x4000 x2800
3000
24000
2x4
Centrifugal Fan
EU4
Ceiling filter (EU-5)
Powder coating steel
15000
5.5
Centrifugal Fan
Phillips
50 mm (EPS)
Brand of Burner
Riello
Model of Riello Burner
yes
Overpressure Protection
yes
Air Valve Actuator
yes
Brand of Actuator
Bellimo (electrical)
Hourmeter
Provided
Timer
Provided
Total Power (W)
15340
Type
KW1900532
Spray Booth
40 x36
Lighting Power (R+l Side Lights) (W)
20 x20
SUS 304
Temp Controller and Thermocouple
Order No
Lighting Power (Upper Light) (W)
G20
Heat Exchanger Material
EU-3
Manual
Specification
Main Structure
Dry active carbon
Air Dumper on Outlet Side (Manual)
www.kawanlama.com
Data
Brand of Lighting
Description
Spray Booth double blower
2x4kW + 1x5.5kW with side lighting
113
BODY REPAIR
Triple Tube Infrared Paint Dryer TBM-131
Features :
• Short infrared wavelength
• Transparent frosted quartz glass
• Powerful penetrability for polished paint surfaces
• Good adhesion and quick drying
Data
Specification
Input Voltage (V)
AC 220
Semi-Heating 800,
Output Power (W)
2nd Heating 1600
Max. Heating 2400
No Less than 50cm
Spray Distance
From Spraying Tube
Spray Duration
15 - 30 Minute
Long arm to Reach Top of Vehicle
Order No
LC0000018
Type
TBM-131
Description
Tri-tube Infrared Paint Dryer
4
Twin Tube Infrared Paint Dryer TBM-222
Features :
• Using special shortwave infrared quartz glass as the heat source which
the light wave offers powerful penetrability
• Electronic timer (range of 060 minutes are fee to choose)
and real-time time digital display function
• The equipment can be used to dry automobile resin putty, two component paint
and water base coating. It has widely scope of application
• Lamp cover adopts stainless steel with shinning mirror-like.
Surface, reflective effect good,thermal gather homogeneously
• Short drying time to ensure high proficiency and high qualty of painting surface
• Bracket is made of metal alloy, strong, beautiful and durable
• The casters, it can move freely, trouble free and convenient
• Each heater tube has its, own control switch, for free choice off different
surface painting
Data
No. of Tubes
Length Tubes (mm)
Power Output (w)
Distance From Panel
Specification
2
58
1600
45-50
Time
Coverage Area (cm)
15-30
100x65
Order No
LC0000291
114
Type
TBM-222
Description
Twin Tube Infrared Paint Dryer
TIFRX-1A
Order No
RR0000253
Features:
Refrigerant Leak Detectors
• Microprocessor controlled circuit with Advanced Digital
Signal Processing
• Detects ALL halogenated refrigerants
• Certified to SAE J1627
• Variable frequency audible alarm
• CE approval
• UL classified
• Constant power indication
• Cordless and portable; operates on two C-cell batteries
• 14” (35.5 cm) flexible stainless steel probe with Teflon liner
• Carrying case included, optional holster
• Optional reference leak source
• Six-segment visual leak size indicator
• True mechanical pump provides positive airflow through
sensing tip
• High and low sensitivity levels
• One touch reset
• Tactile keypad controls
Type
TIFRX-1A
Data
Power Source
Ultimate Sensitivity
Sensing Tip Life
Operating Range
Battery Life
Duty Cycle
Response Time
Reset Time .
Warm-up Time
Unit Weight
Unit Dimensions
Fixed Probe Length
Design Certified by MET
Laboratories, Inc., to meet SAE
J1627 for R-134a, R-12, and R-22.
Description
Leak Detector
Data
TIFZX-1E
Features:
• Patent pending Heated Pentode™ sensor technology
• Refrigerant specific detection
• Detects ALL halogenated refrigerants at levels below 0.1 oz./yr., as low as 0.05 oz./yr. for R-12
• Tri-color visual leak size indication
• Tactile keypad controls with one touch reset and adjustable sensitivity
• True mechanical pump provides instant response and clearing
• Sensor failure indication
• Carrying case and re-charger included
• Ni-MH rechargeable batteries
• Revolutionary design
• Certified to SAE J1627
• Flexible stainless probe (16”)
• CE approved
Specification
3V DC; 2 “C” Cell Alkaline Batteries
Less than 0.25 oz./yr. (7g/yr.)
Approx. 20Hours
30° to 125° F (0° to 52° C)
Approx. 30hrs.
Continuous
Instantaneous
One Second
Approx. 2 seconds
1. lbs. (560grams)
9” x2.25” x2.25”
(22.9cm x5.7cm x5.7cm)
14” (35.5cm)
Sensitivity
Ultimate Sensitivity
Warm-up Period
Operating Temperature
Power Supply
Battery Recharge Time
Failed Sensor Indication
Sensor Life
Battery Life
Unit Dimensions
Weight
Order No
RR0000170
Type
TIFZX-1E
Specification
Per SAE J1627 Criteria: 0.5 oz./yr. (14 g/yr.)
for R-134a, R-22, and R-12
Less than 0.1 oz./yr. (3 g/yr.) R-134a, in High
Sensitivity; as Low as 0.05 oz./yr. R-12 in low
Sensitivity
20 Seconds
32° to 122° F (0° to 50° C)
Ni-Cad Standard; (Ni-MH Optional)
2 Hours, Integral Charge Status Indicator
All LEDs Flash Red, Pump Off
100 to 150 Hours.
Standard Ni-Cad Battery Pack - 4 to 5Hours
(Optional Ni-MH Battery Pack - 5 to 6Hours.)
10.25”L x2.5” Dia. (26cm Lx6.5cm Dia.)
Approximately 16 oz. (452grams)
Description
Leak Detector
REFRIGERANT IDENTIFIER
16910
Features :
Identifies refrigerant type and purges damaging air In addition to dependable refrigerant
identification, the ID Plus measures non-condensable gases (air) in the refrigerant and purges them directly from the tank or system
• Displays the actual percentage of R-12,
R-134a, R-22, and air in the system or tank
• Gives you the option of purging air if
significant concentration is found
• Hydrocarbon alarm sounds if flammable substances are sensed
• On-board printer port allows you to connect a printer for a hard copy of testing results
www.kawanlama.com
Data
Specification
Power source (V)
100- 220
Dimensions (cm)
11” H x9” W x4-1/2” D
(27.94x2.86x11.43 )
Weight
Order No
RR0000117
1.75lbs. (740 g)
Type
16910
Description
Refrigeran Identifier and Purge Air
115
AIR CONDITIONING
EQUIPMENT FOR CAR
REFRIGERANT LEAK DETECTOR
RECOVERY, RECYCLING AND RECHARGE
AIR CONDITIONING
EQUIPMENT FOR CAR
AC-375C
For air condition workshop.
4
Features :
Combines simple operation with superior
Accuracy.
• Automatic recovery/recharge by weight
• Automatic vacuum by time
Automatic Air Purge – Eliminates damaging air
without any monitoring of gauges or opening of
valves.
Oil Drain – The display reminds you to drain the
system oil captured during recovery. Calibrations
on the container clearly show you how much oil
needs to be replaced.
Oil Inject – System prompts user to inject oil before
charge. Reservoir provides visual reference on
calibratedcontainer.
Electronic Scale – The scale is mounted internally
for protection, and has a dampening mechanism
that protects against impact shocks such as
movement over rough surfaces. The scale weighs
recovered refrigerant and charges by weight for
greatest accuracy.
Internal Storage Vessel – Refrigerant is recovered
into and charged out of this vessel, which is
Benefits :
• The unit maintains 6.80kg of refrigerant in an internal vessel, and signals
when it’s time to change the supply tank
• Eliminates damaging air without any monitoring of gauge or opening of
valve
• The unit automatically drains system oil captured during recovery and
the display reminds you to empty the bottle
• The scale is mounted internally for protection. The scale weights recovered
refrigerant and charges by weight for greatest accuracy
Order No
Type
RR0000307
AC-375C
Description
Semi Automatic Refrigerant 3R Unit for
R134a or R12
permanently mounted to the electronic scale for
continuing reliability.
Internal Manifold – Block manifold contains solenoids
that control refrigerant flow for easy operation, also
reducing the possibility of leaking connections.
Maintenance Prompts
• System prompts user to change vacuum pump oil when needed.
• System prompts user to change filter-drier when needed.
Ergonomic Design – The cabinet is easy to maneuver
between service bays and position near the vehicle.
Gauges – The high and low side gauges are mounted
at an angle that’s easy to see.
Unit of Measure – Select pounds or kilograms through
the menu
Features that Speed Service :
• 142 l/m vacuum pump for fast, thorough pull-down
• Heavy-duty compressor pulls from both sides during
recovery
• Single pass recycling
• Oil injector lets you add system oil in seconds
Data
Voltage
Refrigerant Container
Operating Temperature Range
Recycling Filter-drier
Refrigerants
Design Pressure
Pump Free Air Displacement
Dimensions (cm)
Weight
34788-I
Specification
220 — 230V 50/60Hz
On-Board 30 lbs. (14 kg) Vessel
(Source Tank Not included)
50˚ to 120˚F (11˚ to 49˚C)
16 cu. in. in-line (262cc)
R-134a or R-12
98 Class III, ARI 98 Class IV
High-382 psig; Low-171 psig
3.0 cfm (85L/m)
52” H x33” W x20” D
(132 x83.8 x50.8)
232lbs. (105kg)
Features :
Fully automatic function lets you recover, vacuum, leak test, charge, and then walk away. Combines simple operation with
superior accuracy. The Robinair 34788-I recovers, recycles, evacuates, leak tests, and recharges R-134a quickly and accurately.
Automatic operation means less attention is needed!
Automatic Function — With this new option, you can program the unit to recover, vacuum, leak test, charge, and then walk away
without having to operate panel valves.
Vacuum Leak Test — Will monitor the vacuum level after an evacuation, and inform the technician of a possible leak in the
vehicle’s A/C system.
Automatic Refrigerant Refill — With this latest advance, you never have to stop in the middle of a job to change refrigerant
tanks. The unit maintains a user selectable amount of refrigerant in an internal vessel, and signals when it’s time to change the
supply tank, so no monitoring is required.
Automatic Air Purge — Eliminates damaging air without any monitoring of gauges or opening of valves.
Automatic Oil Drain — The unit automatically drains system oil captured during recovery, and the display reminds you to empty
the bottle. Graduations on the container clearly show you how much oil needs to be replaced.
Refrigerant Charging — Has never been this easy. Select a charge mode from either the high side, low side, or both. Accuracy
features eliminate guesswork!
Refrigerant Management Systems—New and improved, system displays refrigerant use and monitors remaining filter life.
Prompts appear when 1/3 of filter life remains.
Vacuum Function — Defaults to 15 minutes, but is programmable up to 99 minutes. Remaining vacuum time is displayed
on the screen.
Data
Specification
Voltage
220-240V 50/60Hz
Refrigerant Container
For air condition workshop
14 kg Vessel (Source Tank Not Included)
On-board
and car assembling plant.
Operating Range
(11° to 49°C) 50° to 120°F
Benefits :
Recycling
Filter-drier
43 cu. in. spin-on type
• Make easy keep the capacity referigerant at the internal vessel and the
Refrigerants
R-134a; 98 Class III, ARI 98 Class IV
user always ready to use the unit
Design Pressure
High-377 psig; Low-171 psig
• Safety to use when over capacity be happens on internal vessel, it’s
Pump Free Air
automatically to purge the air on the internal vessel
(35L/min) 1.5cfm
Displacement
• Easy to use, to know how much oil will be waste when recover process be
(127cm x86.4cm x58.4cm)
happens,
Dimensions
44” H x34” W x23” D
• Easy and accurate to knowing the weight of referigerant stock in internal
vessel with the electronic scale
Shipping Weight
(106.6kg) 235lbs.
• Help to monitoring the pressure at the internal vessel, more safety to use.
Order No
Type
Description
• Good to use on all position with large gauges
RR0000314
34788-I
Automatic Refrigerant 3R Unit for R134a
116
Stargas 898 (Emission Tester for Gasoline Engine)
Measuremanet Range
Revolution Counter
Features :
• LCD displays
• Thermal paper printer
• Battery connection for measure rpm
• OIML class 0
• Serial Port (RS-232) connection
• Multi display measuring (curve,
histogram, digital number)
• Lambda Analysis
• Measurement of CO, HC, CO2, O2 and
NOx(optional)
• Measurement of opacity (combine
with smoke chamber)
Measurement Of Test
Environment Parameters
(Automatically)
Thermometer
Pressure Automatic
Calibration
Measurement Gas Induction
Flow Control
Leak Test
Condensate Drain
Response Time
Warming Up Time
Zero Setting
Plug λ it allows (λ : for car with
catalic converter):
Benefits :
• Good view for analyzing
• Free maintenance of printer ink
• Easy to rpmmeasuring
For Tune-Up Workshop
• EURO 2 approved to use
• Ready connection to PC
Smokemeter (Emission Tester for Diesel Engine)
CO
CO²
HC
O2
NOx
Lambda
0
0
0
0
0
0
0.5
-
0
-
Description
15,00
20,00
30000
25,00
5000
2,000
10000 rev./min
20000
res
res
res
res
res
res
res
10
res
10
0,001
0,01
1
0,01
1(option)
0,001
With Battery Connection
With Induction Clampoptional
750 - 1060
-40 -+60
0% - 100%
res.1
res1
res.1
res.1
From 750hPa to 1060hPa
10I/m (approx)
Internal and Automatic
Automatic
Continuous and Automatic
<10sec
Max.30 sec
Electronic and Automatic
- Lambda probe analysis (1V/5V) with fficiency automatic calculation
- The simulation to assess the correct functioning of the harness - ECU
Order No
SX0000004
Type
898
True Length of Measurement Cell (Mm)
Revolution Counter (Rpm)
Optical Sensor, Ot Sensor (Options) Engine
Temperature
Working Temperature
Measurement Cell Temperature - Adjusted
Light Source
Exhaust Smoke Temperature Measurement
Smoke Pressure Variation Check
Fan Operation Check
Autonatic Zero Setting
Warm-up Time
Automatic Zero Setting
Power Supply
Automatic Protection Glasses Cleaness Check
Storing Temperature
Size (mm)
Weight (kg)
Type
495/ 02
Description
898 OTC Stargas Global Diagnostic
Benefits :
• Flexible to choose of measuring unit
• Easy to understand error system
• Flexible to following many country
regulation
• Easy to use
For Tune-Up Workshop
Description
Opacity
Opacity
Measuremanet Range
www.kawanlama.com
rev./min
-Ambient Pressure (hPa)
-Ambient Temperature (˚C)
-Ambient Relative Humidity
(%)
5-200˚C
Features :
• Dual measure unit (Km or %)
• Auto detect error message
• Multi regulation measuring
system
• Induction system for rpm
measuring
Order No
SX0000009+10+11
%Vol
%Vol
ppm Val
%Vol
ppm Val
0
0
to 99,9% Resolution 0.1
to 99,9% Km-1 Resolution 0,01
200
0 to 6000
0 to 9990rpm - Resolution 10rpm
5 to 150°C Resolution 1°C
+5 to 40°C
90 to 95°C
High Efficiency LED
0 to 600°C Resolution 1°C
Max. 5 Minutes
12-0-12Volt in Volt ac
-20°C+60°C
470x230x220
7.5
Description
Smokemeter
117
SERVICE AND TUNE-UP EQUIPMENT
FOUR GAS ANALYZER
ACCESSORIES for MOTORCYCLE GAS ANALYZER
This accessories must be installed together with Stargas 898 or Multigas 488
to measure exhaust gas from motorcycle ( gasoline )
4
Order No
SX0000108
Type
SL51146
Description
Exhaust Terminal Adapter
Order No
SX0000097
Type
SL01004
Description
Group Filter Oil
ATF CHANGER
Automatic Transmission Fluid Exchanger CAT-402
Features :
• Automatic Fluid change, replacing
For service and tune up workshop
incomplete fluid change of the past
• Recycling and cleaning of transmission fluid
• Electric DC-12V power supply from car battery
• Low oil level protection to avoid running with low oil
• View glasses on both cans offering easy comparison of the flow
• Various connectors adaptable to European, American and Asian Vehicle models
• Equal flow to meet the fluid demand in the automatic transmission
• Recovering the acceleration performance of the automatic transmission
• Reducing the shock, temperature, and fuel consumption of automatic transmission to prolong its
working life
Data
Power Supply (V)
Motor Power (W)
Screen/Display
Fluid Hose (in/out) (m)
Fluid Tank (ℓ)
Equivalent Excharger Error (ml)
Maxexchange Speed (ℓ/minute)
Noise (dB)
Weight (kg)
Dimension/Size (mm)
Order No
LC0000233
118
Type
CAT-402
Specification
DC 12(from car battery)
Electric Pump; 150
LED
2
15x2
±100
2
<70
45
640 x430 x932
Description
ATF Changer
Digital Injector Tester and Ultrasonic Cleaner CNC-601A and CNC-602 A
Bisa untuk Injector
type “sidefeed”
Before cleaning
After cleaning
To improve the performance
of injector
Ultrasonic cleaning
Anti-dust cover
CNC-601A
Adapter for full-range
vehicle models
Features :
• Powerful injector cleaner supported by ultrasonic cleaning
• Stable pressure and wide range achieved on all injector types through
micro computer-controlled adjustment
• Automatic and real-time monitoring of the major parameters
• Draining of demo fluid with a single press on the drain key
Data
Power
Input Power (W)
Ultrasonic Cleaning Power (W)
Range of Pressure Adjustment
(Mpa)
Length of Pressure Adjustment
(Mpa)
Range of Simulating Test (rpm)
Step Length of Simulating Test
(rpm)
Counting Range
Timing Range
Range of Pulse Width (ms)
Volume (ml)
Dimension (mm)
Weight (kg)
Functions and Accessory
Ultrasonic Cleat
Uniformity/sprayAbilit y
Test
Leakage Test
Injecting Flow Test
Auto Test
On-vehicle Cleaning
Structure
Cylinder
Adaptor
Generic Adaptors
CNC-602 A
www.kawanlama.com
Ultrasonic
Cleaning
Order No
LC0000012
LC0000009
Type
CNC-601A
CNC-602 A
Specification
AC220V, 50Hz
450
100
0-0.65
0.004
10-9999
10
1-9999times
1-9999seconds
0.5-25, step length 0.1
2500
550 x530 x1400
80
CNC-602A
√
√
CNC-601A
√
√
√
√
√
X
desk
6
Standard
√
√
√
√
cabinet
6
Standard/
On-Vehicle
Description
Injector Cleaner and Tester 6 cylinder
Injector Cleaner and Tester 6 cylinder
119
INJECTOR CLEANER AND TESTER
SCANNER
X-431 Master Scanner
STANDARD SOFTWARE:
4
Unique and integrated 16 PIN connector
Features :
• Upgrade software via the internet
• Compact flash card 512mb
• Operating system linux
• Internal thermal printer
• New design is more stylish and modern
• Processor speed is higher, so that process data faster
• Smart Boxcomponent integrated with the main unit, so
that the internal loading process is shorter
• Voltage power range capability up to 24 volts DC
• More coverage data vehicles
• Built-in CAN BUS adapters
Faster comminication with cars than X-431
24V operating voltage capability
Data
Operating System
Memory (M)
CF Card (MB)
Main Unit I/O
Power Supply (V/V)
Power (W)
Screen
Order No
LC0000243
120
Type
X-431
Description
Master Scanner
Printer
Ambient Temperature
Relative Humidity (%)
Specification
LINUX
16
512
Universal serial port/ parallel port
DC 12/24
Approx 9
240 x320 LCD touch screen with
background light
Mini high speed thermal printer
-15°C ~ 50°C
< 90
SCANNER
X-431 Diagun Scanner
Features :
• Compact Scanner, Main Unit is small, lightweight, and easy to
carry
• It can read data from two vehicles at once, at the same time
(optional)
• Data transfer system with wireless communication (Bluetooth)
• Easy up to-date software via the internet with a USB cable
• Printer connection via USB Connector
Unique in industry
Order No
LC0000242
STANDARD SOFTWARE:
Synchronously diagnose two vehicles
Type
X-431
www.kawanlama.com
Description
Diagun Handheld Scanner
Data
Display (Inch)
Power Battery (mAh)
Memory
Interfacing
Connector
Data Transfer
Specification
High Resolution Touch Screen 4,3
1530
Micro SD Memory Card 1 Giga
USB Connector (Data and Printer)
Universal 16 Pin Adaptor
Cable and Wireless (Bluetooth).
121
MOTORCYCLE SERVICE EQUIPMENT
MOTORCYCLE SERVICE EQUIPMENT
Motorcycle Lift
Scissors Lift with Air-Hydraulic
Pump (KP1396P).
Lifting Height 1000 mm.
Motorcycle Scissor Lift ElectroHydraulic Control Box(KP1396E).
Lifting Height 1000 mm.
4
Order No
Type
Description
RV0000374
KP1396E
Motorcycle Lift 600kg Electro Hydraulic
RV0000375
KP1396P
Motorcycle Lift 600kg Air - Hydraulic
Motorcycle Tyre Changer
Motorcycle Wheel Balancer
* Optional Accessories :
Features :
Tyre changers especially designed
to handle motorcycle wheels.
Chuck fitted with fixmounted special
clamps to guarantee maximum
rigidity during operation.
Data
Dimension (mm)
Self Centering Lock External
Self Centering Lock Internal
Operating Pressure (Bar)
Motor
Chuck Rotation Speed (rev/min)
Bead Breaker Pressure (kg)
Weight (kg)
Noise level (db)
Order No
RV0000386
RV0000309
122
Type
G7240.18 BIKE
G84A24
Specification
1890 x960 x1215
10” - 20”
12” - 22.5”
8 – 10 Bar
1 ph/220v/0.75kw
6.7
3000
196
<70
Description
Motorcycle Tyre Changer 15”-23”
Adaptor For Reducing Clamp
Features :
Electronic computerised wheel balancer with high performances in terms
of rapidity and accuracy. Single motor driven launch with automatic stop
at the end of the cycle.
For Balancing Unit can choose G1.111H or G2.116H
Data
Dimension (mm)
Rim Diameter
Rim Width
Cycle Time (s)
Power Supply (V/Hz/ph)
Order No
RV0000244
RV0000245
Type
GAR181
GAR181A1
Specification
450 x450 x926
10” - 24”
1.5” - 22”
65
1
7
< 100
230/50/1ph
Description
Universal Flange F/motorcycle Wheel
Distance Gauge Extension
TEST LANE
TESTING EQUIPMENT
Safety Test Lane for Cars , Vans, and Motorcycles
Features :
• The Ravaglioli test and diagnosis system for cars and light commercial
vehicles with 2.5t maximum individual axle load sets today’s standards
for professional operators and test centers
• Developed with modularity and user friendliness in mind, this system
incorporates latest-generation equipment in conformity with applicable
safety regulations and the laws governing the periodical testing of
motor-vehicles in the various countries of the world
• The quality standards distinguishing all Ravaglioli products are a
guarantee of reliabillity through the years and consequently also a
guarantee of the soundness of the investment made
Benefit :
The sophisticated management software offers a range of configuration
option and is therefore constantly ready to respond to changing user
requirements and industry regulations. Thanks to its modular structure, to
the fact it can be subsequently expanded and to its numerous interfacing
options, configuration possibilities are manifold.
Hard Disk (GB)
Color Monitor SVGA
Infra-Red Remote Control
Printer
Power Supply
Weight (kg)
www.kawanlama.com
RT095/095P
RT102/102P RT152/152P
2500
4000
5000
6000
7500
±0.1
5,2
2x3
2x4
2x5,5
202
(A)
>0.7
380V 50Hz 3Ph
385/415
390/420
Control Unit
Data
Pc Board Interface
CPU
RT009
RT011
Multilayer SMD
200MHz Pentium/AMD KG
Hard Disk (GB)
Color Monitor Svga
Infra-red Remote Control
Printer
Power Supply
Weight (kg)
8.4
15”
21”
3ph 220V 50Hz
110
155
Technical Data (Brake Tester)
Control Unit
Data
Pc Board Interface
CPU
Technical Data
Data
Max. Test Weight Per Axis
Max. Transit Weight Per Axis
Max. Braking Force
Load Cells Accuracy
Test Speed
Motors
Roller Diameter
Roller Coating
Coefficient Of Friction
Power Supply
Weight
RT009
Multilayer SMD
200MHz Pentium/AMD KG
8.4
17”
OPT
Si/Yes/Ja
1ph 230V 50-60Hz
110
Data
Max. Test Weight
Per Axis
Max. Transit Weight
Per Axis
Max. Braking Force
RT085M
Load Cells Accuracy
±0.1
Test Speed
5.2
Data
RT085M
500
Motors
500
Roller Diameter
202
3000
Roller Coating
Coefficient of
Friction
Power Supply
Weight
(A)
3
>0.7
400V 50Hz 3Ph
70
123
TEST LANE
TESTING EQUIPMENT
Safety Test Lane for Cars , Vans, and Motorcycles
Technical Data
Side Slip-Tester MINC-Profi
4
Axle Load (kg)
2000
Measurement Range (m/km)
+/-20
Track plate Width (mm)
400
Floor Part Dimension (LxWxH) (mm)
1020x460x80
Communication Desk 3000
Dimensions (HxWxD) (mm)
1400x800x670
Shock Absorber Tester FXT 1 Euro
Axle Load-drive Over (kg)
2500
Test Load Per Axle (kg)
2000
Tracking Width Max. (mm)
2200
Tracking Width Min. (mm)
800
Motor Output (kW)
2x1.1
Exciter Frequency
• Fully automatic test procedure via integrated control or manually via
remote control
With 50Hz Nominal Frequency
ca.16Hz
With 60Hz Nominal Frequency
ca.20Hz
Measurement Range
max.100mm Stroke
• Safety test lane with communication desk 3000 (without PC Package)
Power Supply
230V/400V, 3 Phase, 50/60Hz
• Fully automatic test procedure with digital data processing via PC. The PC
must be supplied extra, EUROSYSTEM software is standard delivery
Fuse (A)
16
Floor part dimensions (LxWxH)(mm)
2320x800x280
Features :
• Safety lane with analog display (incl. imbalance display)
• Safety test lane with communication desk 3000 (with PC package)
• Fully automatic test procedure with digital data processing via PC. The PC
is pre-configured.
Brake Tester IW 2 Euro-Standard RS.No.2
Drive Output of the Motors (kW)
2x3
Test Speed (km/h)
5
Axle Load (kg)
3500
Benefits :
Track Maximum (mm)
2200
• Cost effective test lane for side-slip, shock absorber and brake testing
Track Minimum (mm)
780
Roller Coating
Welded Steel Rollers or Synthetic Coating
• PC Network capacity, ASA network capacity
Running Roller Diameter (mm)
202
• Numerous manufacturer approvals
Roller Axle Separaton (mm)
400
Roller Set Dimensions (LxWxH) (mm)
2320x680x280
Corrosion Protection
Powder paint, color:RAL 5010
• A17” screen, keyboard, color printer and EUROSYSTEM software are
standard delivery
• Expansion possibility with the modular design system from MAHA
• User-friendly with PC and Windows® application
124
DYNAMOMETER
DYNAMOMETER
Performance and Function Tester for Cars, Trucks and motorcycles
Features :
• Driving cycles (optional)
• Language selection
• Motorcycle testing on car roller set (optional)
• Expendable for 4WD car testing (optional)
• Radio remote control for dynamo meter and
cooling fan
Technical data
Color Screen
Dimensions PC Desk (mm)
Rpm
Measuring Accuracy
Power Supply (V/Hz)
Fuse Protection
Roller sets
Wheel Power (kW)
Optional 2nd Eddy Current Brake (kW)
Optional Power Brake
Speed (km/h)
Tractive Force (kN)
Axle Load (kg)
Dimensions (mm)
Dead Weight (kg)
Track Width Min. (mm)
Track Width Max. (mm)
Roller Diameter (mm)
Roller Center Distance (mm)
Smallest Wheel Diameter (Inch)
Elevation of Rollers (mm)
Wheel Lifting Bar
Benefits :
• Continuous measurement
• Discrete measurement
• Load simulation
• Elasticity measurement
• Speedometer test
• Graphics package
1.2 brakes: 35amp TD
2.Power brake : 63 amp TD
3.Split roller set in installation pit:
dimensions per roller set 2260x1100x885mm; weight per roller set
1250kg : track width Min./Max. depending on pit width (dimensions
given is recommended)
4.Available with roller center distance 500mm if ground clearance to low
LPS 3000 car
230/50
16 Amp Time Delay 1)
R 100, R100/2
0-260
0-520
0-260
0-6
2500
3345x1100x625
1200
800
2300
318
540 4)
LPS 3000 truck
19° diagonal
600x1850x800
0-10000
+/-2% of Meas.Value
400/50
R200,R200/2
0-400
0-660kW/0-25kN
0-200
0-15
15000
4550x1100x625
2350 3)
820/Geteilt 950 3)
2620/Geteilt 2750 3)
318
565
12
45
Pneumatic
Options
LPS 3000 motorcycle
230/50
R50
0-260
0-300
0-6
1500
1420x1100x625
450
318
560
-
Hydraulic
Pneumatic (optional)
Interface Box
Rpm Counter
Oil Temperature Probe
Emission Temperature Probe
Printer
Hydr.roller Set Adjustment Device
Additional Eddy Current Brake
-
www.kawanlama.com
Adjustable Eddy Current Brake
Hydrr. Load Simulator
Idle Roller Set
Cooling Fan Model Air 5)
-
125
DYNAMOMETER
DYNAMOMETER
Performance and Function Tester for Cars
4
Features:
• In this 224xlc, load tests can be performed including step, sweep and loaded roll on. Closed loop load testing is also available by targeting engine rpm
• The torque cell calibration routine takes less than a minute to perform. Each eddy current unit attaches to the roller directly by way of a splined shaft, eliminating issues such as belt slippage or failure while
maintaining superior repeatability
• This Model 424xcan be configured for above-ground or in-ground
installation. Every Model 424xcan be upgraded to Model 424xLC2
with the addition of the eddy current load absorption units
MODEL 424x
Data
Maximum Horsepower Hp (Per Drum)
Maximum Speed (MPH)
Maximum Torque (ft/lbs (Per Drum))
Drums
Wheelbase Minimum (inch)
Wheelbase Maximum (inch)
Drum Diameter (inch)
Drum Width (inch)
Minimum Axle Width
Maximum Axle Width (inch)
Maximum Axle Weight lbs (per drum)
Accessory/upgrade
Standard Features And Equipment :
• Measures up to hp+, 2000 ft/lbs torque (per drum), and 200 mph
• Tests vehicles in either two-wheel or all-wheel drive modes
• Above-Ground or Pit installation accessories included
• Consists of two Model 224xchassis dynamometers
• WinPep 7 Software and Hardware to interface (PC, printer, etc.
not included)
• Automatic Conditions Measurement (absolute pressure, air temp,
humidity)
• Ignition wire inductive tachometer pickup leads
• Auto Tie Down Package (straps, ratchets and ground hooks)
• Wheel Chocks
• Air Actuated Brake System
• Remote Software and Brake Control Pendant
• Installation and operation manuals
• One year replacement parts warranty
• 24/7 Tech Support
Specification
2000
200
2000
2
88
140
24
81
N/A
81
3000
Model 224x
Model 224xLC
Model 248x
Model 424x
Model 424xLC2
Pit Covers
-----
-----
Above Ground Kit
-----
-----
---
---
Wideband Air/Fuel Ratio
System
Ez ppm Module
Optical Rpm Pickup
Custom Tuning Packs
Analog Module
Thermocouple Amp
Must Be Used with Analog
Module
Datalink For Obdii Applications
Opt*
Awd Attachement
= Available option
126
X
---
Eddy Current Brake Option
--- = Standard equipment
X
= Not available
--Opt*
= Only available for model 248 pit dynamometers
DYNAMOMETER
DYNAMOMETER
Performance and Function Tester for Motorcycles
MODEL 250i
MODEL 200i
Model 200i Quick Features :
• The Model 200i continues the Dynojet tradition of providing a reliable, repeatable, consistent and easy to use chassis dyno for quick and
accurate diagnosing of performance problems
• The Model 200i offers an improved operator interface through the use of the integrated control console, new WinPep 7 software and a wider plat form for easy loading and unloading. Shop sales, service work and
credibility all benefit with a Dynojet chassis dynamometer
Specifications
Model 250i Quick Features :
•The dynojet load control system was developed through years of experience with over 3,900 dynamometer installations worldwide
• The design is easy to operate and provides the function of steady state load control
• Dynojet’s load control system uses the latest in eddy current power absorption technology, which combines with our easy to use software,
So any technician can get repeatable, consistent results
200i
Base Length (cm)
Base Width (cm)
Base Height (cm)
250i
79.83” (202.8)
42.50” (108.0)
70.71” (179.6)
18.10” (45.9)
Drum Diameter (cm)
18” (45.72) per Wheel
Drum Width (cm)
Drum Concentricity (mm)
Maximum Length (cm)
(front of Front Wheel to Center of Rear Wheel)
Weight
Dynamometer
Crated Dynamometer
Material
Drum
Shaft
Frame
Performance Specifications
Modeled Mass (Standard)
Modeled Mass (High-inertia)
Maximum Horse Power (hp)
Maximum Speed (mph)
Maximum Torque (ft/lbs)
Temperature Range
General
Calibration
Inductive Pickup
16.37” (41.59)
+/- 0.001” (+/-0.025)
84” (213.4 cm)
1600 lbs (725 kg) (Approx.)
A 106 Steel
2 3/16 Inch 1144 Turned, Ground and Polished Steel
10 Gauge Cold Roll Steel
750
200
750
32° F to 158° (0°C to 70°C)
Not required (Factory Callibrated)
Primary Wire rpm Pickup
Power Requirement
240V/30A/1ph + 380V/30A/3ph + Battery 60A
Remote Switches
Hardware
Timing Accuracy
Drum Speed Accuracy
RPM accuracy
www.kawanlama.com
2375 lbs (1077kg) (Approx.)
2500 lbs (1134kg) (Approx.)
Remote Software Control
+/- 1 Microseconds
+/- 1/100th
+/- 1/10th
Order No
Type
Description
D90000001
200i
Dynojet Dynamometer for Motorcycle
D90000002
250i
Dynojet Dynamometer for Motorcycle
127
DYNAMOMETER
Performance and Function Tester for Motorcycles
Accessory/Upgrade
Model 200i
Model 250i
DYNAMOMETER
Data-link For Harley-davidson Delphi ECM
Application
Air/fuel Ratio Module (Requires Installation
or Availability of Shop Air)
Dual Multi-axis Cooling Fan System
Monitor Tray
Air Brake
Eddy Current Load Absorption Unit
---
4
Power Clamp/Carriage
Torque Cell Package
X
Extended Carriage
Fat Boy Wheel Adapter
Folding Ramp
= Available Option
128
--- = Standard Equipment
X = Not Available
Timing Light Digital With Volt Tester
Timing Light Inductive Xenon
Features :
• For use on 12V ignition system
• Brilliant blue-white xenon tube can
work even in daylight
• 1,000,000 flash capability
• Solid-state burnout-proff polarity
with automotive reverse polarity and
overload protection
• Sliding clamp-on inductive pick-up for
easy and safe hookup
nly for
Used o gine
en
petrol
KW19-302
KW19-230
Timing Light Die Cast Metal
KW19-231
Features :
• Professional quality tool works with • Detach able heavy duty inductive
pick-up clamps and leads for easy
conventional and distributor lees
operation and replacement
(DIS) ignition systems
• Heavy chrome plated die cast metal • Bright xenon flash tube provides
concentrated light for easy
housing with protective rubber
Features :
visibility of timing mark
nose
• Easily operate on all 12V ignition system
• Functions:
• Large LED makes readings easy
• Superior performance at all speeds through • Ta c t i l e k e y p a d f o r f u n c t i o n Advance : 0-6 Degree BTDC
Tach
: 200-10000rpm
8000rpm maximum rating
selection
Dwell
: 0-99.9%
• Bright bulb provides consentrated light for • Works on all 12V gasoline engine
Volt
: 0-16V
high visibility of timing mark
• Detachable clamp-on inductive pick-up for
Order No.
Type
Description
easy and safe hookup
KW1900230
KW19-230
Timing Light Inductive Xenon
• Double check light indicates incorrect
hookup and faulty flash
• Replacable xenon flash tube
KW1900231
KW19-231
Timing Light Die Cast Metal
KW1900302
KW19-302
Timing Light Digital w/Volt Tester
MAINTENANCE BATTERY CHARGER 12V
INDUCTIVE DIGITAL TIMING LIGHT
Features :
• Short-circuit protection
• Over charging protection
• Wrong connect protection
Specifications:
• Input power • Output power
Features :
• Works on all 12V gasoline engines
• High impact ABS housing
• Detachable heavy duty inductive pick-up clamps and
leads for easy operation and replacement
Order No.
Order No.
Type
Description
KW1900620
KW19-620
Digital Timing Light
KW1900934
: 220V and 50Hz
:14.4VDC, 0.9A
(for Motorbike)
14.4VDC, 3.2A (for Car)
Type
Description
Maintenance Battery Charger
KW19-934
0.9A/3.2A, 12V
BATTERY TESTER
BATTERY CHARGER
Smart Battery Charger
Features :
• Built-In-micro proccessor control
• 3 stages high frequency change
• Fault diagnosa and alarm
• Fully fault protection
• For all lead acid battery
• DC 12V output up to 12
12V Output
Up to 12Amp
Order No.
KW1900939
Specifications :
• Input Power : 220V, 50Hz,
400W
• 12 Volt Output Socket
• 2/6/12 Charge
• DC 12V 12A Output
• 5 Minutes Quick Charge to
Start
Reverse
Connection and
Short Cut Protection
Type
Description
KW19-939 Smart Battery Charger 12V - 2A/6A/12A
www.kawanlama.com
KW19-280
KW19-281
Order No.
KW1900280
KW1900281
KW1900911
Type
KW19-280
KW19-281
KW19-911
KW19-911
Description
Battery Tester 2V/6V/12V
Battery Tester w/on-off Button
Compact Battery Tester 12V DC
129
ENGINE TUNE UP AND BATTERY TESTER
TIMING LIGHT
BATTERY CHARGER
Battery Charger with Jump Starter- Heavy Duty Type
BATTERY CHARGER
Application :
Krisbow battery charger, vehicle starter and
charging device can be used by vehicle repair
shops. Transporting companies can use it to
start vehicle in cold weather. It is also best
choice for charging vehicle batteries, fork lifts,
electric entertainment equipment.
For KW19-650
and 354
KW19-650
4
Type
Input Voltage (V/Hz/Ph)
Input Power (kVA)
Charging Voltage (V)
Charging Current (A)
Current (0 volt) (A)
Current (1 volt) (A)
Batteries Start Min./Max. (Ah)
Batteries Start When Charging (Ah)
Dimension W xD xH (mm)
Weight (kg)
Orientation Scope (V)
KW19-650
1.77/15
12/24
60
650
400
65 ~ 120
150 ~ 240
480 x350 x740
42
12/24 Inside, Small Car
the Assistance Starts and
Refreshes
KW19-356
380/50/3
4.4/48
12/24
150
2,000
1,400
150 ~ 220
240
520 x340 x790
72
12/24 Large And Heavy
Type Car Starts and
Refreshes
Description
Battery Charger 60A starter 650A 12V/24V
Benefits :
Our battery charger, being a rectifying device to
convert alternating current into direct current, is
to be used specifically by vehicle repair shops,
tractor stations, battery charging stations, motor
cycle repair shops, factories for the purpose
of replenishing electrical power of batteries.
The charger can also be employed as a direct
current source for small-scaled electrolysis and
electroplating porjects.
Order No.
Type
Description
KW1900652
KW19-652
Battery Charger 20A, 12V/24V
KW1900653
KW19-653
Battery Charger 30A , 12V/24V
KW19-654
KW1900654
KW19-654
KW1900655
KW19-655
KW1900656
KW19-656
KW1900657
KW19-657
KW19-652
130
2.9/28
12/24
100
1,200
800
100 ~ 180
200 ~ 240
500 x340 x740
45
12/24 Inside, Small Car the
Assistance Starts and
Refreshes
KW19-355
380/50/2
4.4/43
12/24
150
1,800
1,100
180 ~ 220
200 ~ 240
500 x340 x740
55
12/24 Inside, Small Car
Starts and Refreshes
Directly
Type
KW19-650
KW19-354
KW19-355
KW19-356
Battery Charger - Industrial Type
A
kg
mm
KW19-354
220/50/1
Order No.
KW1900650
KW1900354
KW1900355
KW1900356
Type
Input Voltage (V/Hz/Ph)
Input Power (kVA)
Class of Insulation
Charging Current
Weight
Dimension (L xW xH)
KW19-356
KW19-355
KW19-354
KW19-652
KW19-653
0.6
0.9
5 ~ 20
10
340 x220 x260
5 ~ 30
14
340 x240 x260
KW19-654
KW19-655
220/50/1
1.5
3.0
F
12 ~ 24
5 ~ 50
5 ~ 100
20
55
380 x280 x280
KW19-656
KW19-657
4.5
6.0
5 ~ 150
68
500 x300 x730
5 ~ 200
85
BATTERY CHARGER
Compact and easy to operate
Specification
Rated Input Voltage (V)
Frequency (Hz)
Rated Capacity (kVA)
Class of Insulation
Charging Current (A)
Weight (kg)
Dimension (cm)
Order No.
KW1900531
BATTERY CHARGER AND
AUTOMOTIVE TESTER
Mostly used on car service, workshop and
many others activities where the battery used
as power supply
220
50
2.56
F
6 ~ 72
5 ~ 30
36
49 x34 x68
Type
KW19-531
Description
Battery Charger 5A-30A, 6V-72V
PRESSURE TESTER KIT
Petrol Engine Compression Tester Kit
KW19-615
KW19-616
Features for
KW19-615:
• Adaptive inside:
10 x1, 12 x1.25,
14 x1.25, 18 x1.5
• M10 xM18 screw
repair driver
• M14 xM18 screw
repair driver
Features for
KW19-616:
• Adaptive inside:
10 x1, 12 x1.25,
14 x1.25, 18 x1.5
• M10 xM18 screw
repair driver
• M14 xM18 screw
repair driver
Order No.
Type
Description
KW1900615
KW19-615
KW1900616
KW19-616
w/ Universal Adaptor
Fuel Injection Pressure Tester Kit
Features :
• Suitable for Japanese, American and
European cars
• It can be hooked up or feed into
system
• Comprehensive kit of adaptors and
fittings for most fuel injection system
• 3-1/2” gauge with dual scale (psi and Bar),
reading from 0-140psi and 0-10Bar
• Hanging hook and protective bumper
specially for gauge
• Pressure release valve fitted with long
drain hose allows safe recovery of
pressure and fuel
Order No.
Type
Description
KW1900613
KW19-613
Fuel Injection Pressure Tester Kit
Radiator Pressure Tester Kit
Diesel Engine Compression Tester Kit
INCLUDING RADIATOR CAP
PRESSURE TESTER
Features :
• To check the condition of automobile
radiator
• Leaking on radiator its easy to be found
• The condition of radiator cap can be
checked also with this device
• Suitable used for all kind of car radiator
like : Toyota, Honda, Mitsubishi, Suzuki,
Isuzu, Mazda, Infinity, Nissan, Peugeot,
Ford, Chrysier, Chevrolet, Opel, VW,
Jeep, Renault, Audi, BMW, MercedesBenz, Volvo, Truck.
• 2 pcs cap adapter (testing the pressure
cap).
• “T” shape joint 5/16”, 3/8”, oil hose 5/16”,
3/8”.
Features :
• Can be applied to all kinds of diesel engine
• Pressure gauge : 0 - 1000 psi/
0 - 70 bar/ 0 - 71 Kgf/cm2
• Glow plug adaptor (M10 x 1 x 91mm, M10
x 1 x 119mm, M10 x 1.25 x 135mm, M22
x 1.5 x 118mm, M10 x 1 x 113mm, M10 x
1 x 102mm, M10 x 1 x 83mm, M10 x 1.25
x 64mm, M10 x 1.25 x 47mm), Dial gauge
340mm, Screw adaptor 160mm, Injector
adaptor (M24 x 1.5 x 88mm, M22 x 1.5
x 73mm, M24 x 2 x 63mm, M20 x 1.5 x
75mm), H fitting, Bleed valve
Order No.
Type
Description
Order No.
Type
Description
KW1900617
KW19-617
Diesel Engine Compression Tester Kit
KW1900618
KW19-618
Radiator and Radiator Cap Pressure Tester Kit
Oil Pressure Meter Kit
Features :
• Designed to check engine oil pressure in
both cars and trucks. Easy to read dual
scale gauge. Complete with 24” (600mm)
of oil proof hose with 1/8”NPT
• Also includes 1/4” NPT and 3/8”NPT
adaptors
• Dual gauge readings: 0 to 300psi
(0 ~ 21 Bar)
• Gauge diameter: 2.5”
Order No.
KW1900614
Type
KW19-614
www.kawanlama.com
Description
Oil Pressure Meter Kit
Bearing Separator Kit
Features :
• Two sets bearing separator
• Pullout the bear with the H-type
beam bolts
Order No.
KW1900628
Type
KW19-628
Description
Bearing Separator Kit 2” and 3.5”
131
OIL DISPENSER
LUBRICATION DISPENSER
Manual and Air Operated Oil Dispenser
Application:
Four wheel drive oil,
transmision oil,
engine oil
Specification KW19-293
Tank (ℓ)
Capacity (gr/Stroke)
Hose Lenght (m)
Fitting
Weight (kg)
KW19-293
Order No.
KW1900293
KW1900295
KW19-295
Type
KW19-293
KW19-295
Description
Manual Oil Dispenser 24ℓ
Air Operated Oil Dispense 24ℓ
Waste Oil Suction Drain/extractors
4
Supplied with
( for KW19-295 ) :
• Lever gauge complete
with metal guard
• Pressure gauge
• 1.8m flexible hose
• Oil valve with non drip tip
Supplied with
( for KW19-293 ) :
• Double acting hand operated
pump
• Level gauge with metal guard,
• 1.8 meters Flexible hose length
with metal spout and shut off valve
24
200
1,80
Metal
12,0
Specification KW19-295
Air Inlet Connection
Alimentation with Air Pressure Gauge
Working Pressure (Bar)
Tank (ℓ)
Diameter (Inch)
Delivery tube
Length (m)
Fitting
Weight (kg)
Specification for KW19-296
Air Inlet Vonnection (Venturi for Vacuum) (Inch)
Venturi Working Pressure (Bar)
MaxFepressure (Bar)
Tank + Pre-Chamber (ℓ)
Features :
• Supplied with 90ℓ tanks
• Tool try
• and Wheel with brake
Suction Tube
Delivery
Tube
Diameter (Inch)
tires valve
3-8
24
3/4
1.8
Metal
11
1/4
8
-0.85
90 + 8
1/2
Length (m)
2
Diameter (Inch)
3/4
Length (m)
2
Air Inlet Connection (For Pressurize and Deliver)
Tires Valve
Alimentation with Air Pressure Gauge (For Pressurize and Deliver)
MaxPressure (Bar)
0.5
Weight (kg)
27
Specification for KW19-297
Air Inlet Connection (Venturi for Vacuum) (Inch)
1/4
Venturi Working Pressure (Bar)
8
MaxDepressure (Bar)
-0.85
Tank (ℓ)
90
Suction Tube
Diameter-length
KW19-296
Diameter (Inch)
2
Diameter (Inch)
Delivery tube
1/2
Length (m)
3/4
Length (m)
2
Collection Bowl with Grid
Air Inlet Connection (For Pressurize and Deliver)
Tires Valve
Alimentation with Air Pressure Gauge (For Pressurize and Deliver)
KW19-297
132
MaxPressure (Bar)
0.5
Weight (kg)
28.5
Order No.
Type
KW1900296
KW19-296
KW1900297
KW19-297
Description
Waste Oil Suction with Bowl
90ℓ
Comb. Oil Suction/Drainer
90ℓ
Swivel Wall Bracket
Mounted Oil Pump Kit For 200ℓ Drum
Includes:
• 5:1 air operated pump, stub type, 290mm suction tube
• Wall bracket with 42mm adaptor
• Suction kit for stub pump
• Open hose reel with 10 meters 1/2” hose rate
R1AT
• Oil control valve with digital meter and manual
non drip tip
• Drip tray
• Connecting hose 1/2” x2m
• 1/4” air pressure regulator
Specification
Compression Ratio
Air Inlet Connection φ (Inch)
Oil Outlet Conn φ (Inch)
Air Consumption (ℓ/min)
Suction Tube Dia. (mm)
Suction Tube Length (mm)
Order No.
KW1900514
OIL PUMP, PRESSURE SPRAYER,
AND GREASE DISPENSER
WALL MOUNTED OIL PUMP KIT
5:1
1/4
1/2
6-8
330
42
290
Type
Description
KW19-514
Wall Mounted Oil Pump Kit for
200ℓ Drums
PRESSURE SPRAYER
A = 335mm
B = 960mm
C = 250mm
The pressure sprayer must be utilized only to spray liquids with a
solvent base or alkalines, as long as they do not contain an acid base.
The pressure spray consists of a pneumatic spray nozzle and a tank
mounted on casters.
Specification
Tank Capacity (ℓ)
Operating Pressure (bar)
Fitting for Entry of Air in Tank
Weight (kg)
Length of the Flexible Spraying Tube
Order No.
KW1900415
Type
KW19-415
KW19-415
24
Between 3 and 7
As tyre valves
13.5
1.9
Description
Pressure Sprayer 24 ℓ
GREASE DISPENSER
Manual Grease Dispenser
Air Operated Grease Pump and Dispenser
Complete with :
• 2 wheel cart
• 4 meter hose 1/4” R2AT
• Cover dia. 310mm
• Follower plate dia. 310mm
Features for KW19-292 :
• High pressure hand operated grease
dispenser for bulk grease, with
14 kg reservoir complete with:
• 1,5m hose flexible spout and 4 jaws
grease coupler
Order No.
KW1900292
Type
KW19-292
Description
Manual Grease Dispenser 14kg
www.kawanlama.com
Specification
Compression Ratio
Grease Outlet Connection φ (Inch)
Noise (db)
Air Consumption (ℓ/m)
Suction Tube Dia. (mm)
KW19-294
60:1
1 4
/
3 8
/
6-8
79
340
32
500
*Grease specification maxNLGI grade 3
Order No.
Type
Description
KW1900294
KW19-294
Air Operated Grease Pump 20~30kg
133
GREASE DISPENSER, TESTER,
AIR CONDITIONING EQUIPMENT AND CABLE
GREASE DISPENSER
BRAKE FLUID TESTER
Features :
A.Green-color indicator flashes indicates good
brake oil quality
B. Yellow-color indicator flashes indicates bad
brake oil quantity
C.Red-color indicator flashes or beeping alarm
indicates brake oil quantity is unsafe to use
D.Test button
E. Reset screw
F. Test bar
G.Test bar head
H.Reset indicator (green light)
B
A
C
H
D
E
F
G
Features :
Air Operated Grease Dispenser for Bulk
Grease, with 14kg Reservoir
Complete with :
• Grease pump 60:1 - 500mm
• 4mt hose R2AT 1/4”
• Grease shut-off valve with flexible
spout and 4 jaw coupler
Order No.
KW1900373
Type
KW19-373
Description
Brake Fluid Tester
AIR CONDITIONING EQUIPMENT
Manifold Gauge
KW19-552
WITH 3pcs CHARGING HOSE
Specification
Compression Ratio
Grease Outlet Connection φ (Inch)
Noise (db)
Air Consumption (ℓ/m)
Suction Tube φ (mm)
Hose Lenght r2at 1/4” (m)
4
60:1
1 4
/
3 8
/
6-8
79
340
32
500
4
KW19-506
KW19-505
Order No.
Type
KW1900505 KW19-505
KW1900506 KW19-506
Order No.
Type
Description
KW1900552
KW19-552
Air Operated Grease Dispenser 14kg
Krisbow testing manifold can
be used as equipment for air
conditioning services.These
manifolds are applicated for
R134A, R22 refrigerants.R22
is used mostly in home and
building air conditioning.
R134A as replacement of R12 uses
in automotive air conditioning.
Description
Testing Manifold R134A, 36”/90cm
Testing Manifold R22, 36” /90cm
CABLE CONNECTION
AIR CONDITIONING EQUIPMENT
4m
Cable Length
Vacuum Pump
Features:
Power transfer from donor car to flat car
• Power transfer via lighter socket with out
lift up the engine bonnet
• No installation requested, easy to use
• Thermal protect away from over heat
• Fuse protect for surge current
Specification
Frequency (Hz)
Flow Rate (ℓ/min)
Ultimate Vacuum (Pa)
Power (HP)
Inlet Port (Inch)
Oil Capacity (mℓ)
Order No.
KW1900533
KW1900534
KW1900535
134
KW19-533
50
100
5
1/3
1/4
3/8
280
Type
KW19-533
KW19-534
KW19-535
KW19-534
50
170
5
1/2
1/4
3/8
320
KW19-535
50
226
5
3/4
1/4
3/8
800
Description
Vacuum Pump 1/3HP
Vacuum Pump 1/2HP
Vacuum Pump 3/4HP
Order No.
Type
Description
KW1900898
KW19-898
Cable Connection 4m, 10A
CABLE JUMPER
200A
Dia. 2.9mm²
200A
Dia. 16mm²
KW19-888
KW19-889
Accu Recomendation max. 70 Ah
Accu Recomendation max. 200 Ah
Order No.
Type
Description
KW1900888
KW19-888
Cable Jumper 200A, 2.5m, 2.9mm²
KW1900889
KW19-889
Cable Jumper 200A, 3m, 16mm²,
TUV/GS Standard
20
40
Available
Gallon
Gallon
One piece tank construction with powder
coating finish and fitted with fully sealed,
magnetic driving pump unit, Fluid
recirculated through replaceable filter
element and directed onto workpiece
through flexible metal delivery nozzle 25
Gallon capacity tank fitted with fusible link
hinge which automatically snaps lid shut in
the event of a fire. Parts basket for snaking
small parts in solvent.
KW19-313
Features:
• Rugged welded steel
• Convenient removable work
shelf.
• Parts basket for snaking small
parts in solvent.
• Self-latching fuse linked fire
cover
Order No.
KW1900313
KW1900314
• 240V/50Hz solvent pump
• Recirculates 50 Gallon of solvent
per hour.
• Tank capacity: 20 Gallon.
• Solvent capacity: 12 Gallon
Type
KW19-313
KW19-314
Description
Parts Washer 20 Gallon
Parts Washer 40 Gallon
Features :
• 1,000kg capacity power hydraulic unit
with foot operation
• Quicker and easier than using ratchet
driven spring compressor
• Yokes reduce the risk of spring slippage/
damage
• Suitable for spring from 4 ~ 61/2” or Ø102
~ Ø165mm
Specification
Capacity (Ton)
Max. Working Length (mm)
Ram travel (mm)
1
440
325
4 ~ 61/2
102 ~ 165
38
123 x29 x17
Inch
mm
Spring size (ø)
Weight (kg)
Package (cm)
Order No.
Type
KW1900612
KW19-612
Description
Coil Spring Compressor 440mm
AUTOMOTIVE SERVICE TOOLS
Universal Ball Joint Puller
AUTOMOTIVE SERVICE TOOL
Features KW19-908 :
For passenger cars and truck, for removal of ball
pivots on tie-rods and stabilizers, max. Capacity
up to 50mm by reversing the bottom part, wide
clamping range due to infinite variability.
Timing Gear Puller
Features:
• Bolts 5/16”-18x100mm 2pc
• Bolts 3/8”-16x100mm 2pc
Order No.
Type
Description
KW0103453
KW01-3453
Timing Gear Puller, 34.5x27x19.5cm
HYDRAULIC BODY REPAIR KIT
KW05-61
AUTOMOTIVE SERVICE TOOL
AND HYDRAULIC LIFTING
COIL SPRING COMPRESSOR
PARTS WASHER
Features :
portable hydraulic jack set
includes:
hand pump, hose, cylinder ram,
spreader ram, rubber head,
rubber faced flat - base, ram toe,
plunger toe, wedge head,
900 VBase, serrated saddle,
male thread adapter, assorted
extension tubes.
Features KW19-909:
• It is good to use for powerfull structure
• Stand design to solve the space problem
• Jaws open : 19mm
Order No.
KW1900908
KW1900909
Type
KW19-908
KW19-909
Description
Universal Ball Joint Puller 50mm
Ball Joint Separator 19mm
Specification
Capacity (Ton)
Ram Lowest Order (mm)
Ram Stroke (mm)
Weight (kg)
Dimension (mm)
KW05-61
4
330
120
17
585 x350 x180
Specification
Capacity (Ton)
Ram Lowest Order (mm)
Ram Stroke (mm)
Weight (kg)
Dimension (mm)
KW05-62
10
470
150
31
815 x430 x165
Order No.
Type
KW0500061
KW0500062
KW05-61
KW05-62
Description
Hydraulic Body Repair Kit 4Ton
Hydraulic Body Repair Kit 10Ton
KW05-62
www.kawanlama.com
135
MANUAL AND HYDRAULIC LIFTING
FRAME STRAIGHTENER
Specification
Capacity (Ton)
Weight (kg)
Dimension (mm)
Order No.
KW0500094
10
50
3060 x475 x310
Type
KW05-94
Description
Frame Straightener 10Ton
ENGINE CRANE
KW05-94
ENGINE STAND
Capacity
625kg
KW05-54
Specification
4
Capacity (kg)
625
Weight (kg)
33.5
Dimension (mm)
Folds for easy storage
870 x195 x220
Order No.
Type
Description
KW0500092
KW05-92
Engine Stand 625kg
Specification
Capacity (Ton)
2
Boom Working Range (mm)
1050 ~ 1590
Lifting Range (mm)
0 ~ 2300
Weight (kg)
60
Dimension (mm)
1620x975x1500
Order No.
Type
KW0500054
KW05-54
Description
Hydraulic Engine Crane 2Ton
TRANSMISSION JACK
Floor Type, Manual Transmission Jack
Specification
Capacity (kg)
KW05-759
KW05-760
136
KW05-759
KW05-760
500
1000
Length (mm)
750
900
Width (mm)
412.5
492
Min. Height (mm)
215.6
210
Max. Height (mm)
564
775
Order No.
Type
Description
KW0500759
KW05-759
Transmission Jack 0.5Ton, Floor Type
KW0500760
KW05-760
Transmission Jack 1Ton, Floor Type
Standing Type, Manual and Pneumatic Transmision Jack- 500kg
Pneumatic
Specification
KW05-444
Capacity (kg)
Min. HT (mm)
1125
830
Max. HT (mm)
1940
1815
Stroke
1st stage (mm)
Package Size (mm)
KW05-561
FARM JACK
Order No.
Type
KW0500444
KW05-444
KW0500561
KW05-561
505
815
2nd stage (mm)
Weight (kg)
KW05-444
KW05-561
500
480
38
94
1120 x 245 x 290
560 x 385 x 880
Description
Transmission Jack 500kg
(Hydraulic Standing Type)
Transmission Jack 500kg
(Pneumatic Hydraulic Standing Type)
JACK STAND
3Ton
3Ton
6Ton
Double safety pin
Large area feet to
resist sinking into
asphalt
KW05-477
Specification
KW05-478
Specification
KW05-477
KW05-478
Capacity (Ton/kg)
6000
3000
6000
3000
Base Size (Inch)
Min. Height (Inch)
Max. Height (Inch)
Weight (kg)
7 x4-1/2
4-15/16
26
13
7 x4-5/8
4-15/16
40
14
Order No.
KW0500477
KW0500478
Type
KW05-477
KW05-478
Description
Farm Jack 3 Ton, 33”
Farm Jack 3 Ton 48”
KW05-60
KW05-1677
3
6
Height:
(Min.)
(Max.) (mm)
295
425
395
605
Weight (kg)
3.4
13.2
Capacity Ton)
Order No.
Type
Description
KW0500060
KW05-60
Jack Stand 3Ton (2pcs)
KW0501677
KW05-1667
Jack Stand 6Ton (2pcs)
HYDRAULIC JACK
Hydraulic Jack 2 Ton
Description
2Ton
Capacity (Ton)
Height
2
Minimum (mm)
125
Maximum (mm)
300
Rise (mm)
175
Weight (kg)
7
Case Dimension(mm)
KW05-39
www.kawanlama.com
480 x210 x145
Order No.
Type
Description
KW0500039
KW05-39
Hydraulic Jack 2Ton
137
MANUAL AND HYDRAULIC LIFTING
TRANSMISSION JACK
BOTTLE JACK
HYDRAULIC LIFTING
Available
5-50Ton
KW05-140
KW05-141
KW05-142
Description
KW05-144
KW05-145
Capacity
Height
Lifting
Adjusting
Weight
(ton)
Min. (mm)
Height (mm)
Height (mm)
(kg)
Order No
Type
KW0500140
KW05-140
Hydraulic Bottle Jack - 5Ton
5
216
127
70
4.8
KW0500141
KW05-141
10
230
150
80
6.8
KW0500142
KW05-142
20
190
85
60
10
KW0500144
KW05-144
30
240
130
-
21
KW0500145
KW05-145
50
236
120
-
30
Hydraulic Jack 4 Ton
4
Hydraulic Jack 3.5 Ton
3.5Ton
4Ton
Foot pedal
Features:
• Universal joint
• Dual return springs
• Roller action
• Flange body
• Oversizes body
KW05-40
KW05-757
Description
Capacity
Specification
4
Ton
Capacity
Ton
3.5
mm
145-500
mm
500
kg
40
mm
725 x355 x210
Min. height
mm
100
Minimum height
Max. height
mm
508
Maximum height
Net weight
Gross weight
Product dimension
kg
kg
mm
46.5
48.5
745 x349 x180
Package dimension
mm
800 x440 x220
Order No.
Type
KW0500757
KW05-757
Weight
Package size
Order No.
Type
Description
KW0500040
KW05-40
Hydraulic Jack 3.5Ton
Description
Hydraulic Jack 4Ton
Aluminium Hydraulic Jack 2 Ton
Specification
2 Ton
Aluminium Body
Capacity
Ton
2
Lifting range
mm
85 ~ 445
Weight
Package size
138
kg
24
mm
740 x340 x220
Order No.
Type
Description
KW0500325
KW05-325
Aluminium Hydraulic Jack 2 Ton
HYDRAULIC GARAGE JACK
3Ton
2Ton
KW05-55
HYDRAULIC LIFTING
5Ton
KW05-56
KW05-57
10Ton
Order No.
KW05-58
Specification
Description
KW0500055
KW05-55
Hydraulic Garage Jack 2Ton
KW0500056
KW05-56
KW0500057
KW05-57
KW0500058
KW05-58
KW05-55
KW05-56
KW05-57
2
3
5
10
Minimum (mm)
140
140
150
160
Maximum (mm)
800
670
560
560
Capacity (Ton)
Height
Type
Weight (kg)
Case Dimension (mm)
KW05-58
58
56
95
145
1220x430x200
1400x320x200
1510x380x210
1640x480x260
Aluminium Hydraulic Jack 1.5Ton With Jack Stand 3Ton
Specification
Hydraulic Jack
3Ton
1.5Ton
Capacity (Ton)
Product size (mm)
1.5
85~445
Net weight (kg)
Gross weight (kg)
Dimension (L xW xH) (mm)
Jack Stand
Order No.
KW0500751
Type
Description
KW05-751
Aluminium Hydraulic Jack 1.50 Ton With
Jack Stand 3Ton
19.5
20.5
740x340x220
Jack Stand
Capacity (Ton)
Lifting range (mm)
Net weight (kg)
Gross weight (kg)
Dimension (L xW xH) (mm)
3
293 ~ 405
4/Pair
5/Pair
250x250x85
PNEUMATIC HYDRAULIC GARAGE JACK
Specification
KW05-488
KW05-489
www.kawanlama.com
KW05-488
KW05-489
Capacity (Ton)
22
44
Min. height (mm)
228
235
Max. height (mm)
444
413
Air Input (Psi/(bar))
120-200/
(8-13)
120-200/
(8-13)
Air Consumption (cfm (ℓ/m))
7.8 (221)
7.8 (221)
Order No.
Type
KW0500488
KW05-488
KW0500489
KW05-489
Description
Pneumatic Hydraulic Garage Jack
22Ton
Pneumatic Hydraulic Garage Jack
44Ton
139
HYDRAULIC LIFTING
PNEUMATIC END LIFT FOR TRUCK
Application:
Air Lifts are designed to efficiently lift large
truck, trailers, buses, heavy-duty construction
equipment and agricultural vehicles. They
function on 100% air for dependability and
longevity.
Specification
Material
ALL Steel
Saddle Min. Height (mm)
447
Saddle Max. Height (mm)
1270
Saddle Length Adjustment (mm)
Weight (kg)
290
Air Supply (bar)
4
1029-1670
10-12
Order No.
Type
Description
KW1900952
KW19-952
Pneumatic End Lift 10Ton For Truck
MOTORCYCLE LIFT
Hydraulic Motorcycle Lift Table
Hydraulic Motorcycle and ATV Lift Table
Features :
• Hydraulic lifting mechanism
• Mechanical safety lock to prevent
inadvertent lowering
• 2 fixed wheels and 2 castors for extra
manoeuvrability
• Foot activated pump and realese valve
• Ideal item for keeping in the garage to work on your vehicle
Application :
• Suitable for use with off road motorbikes
(trail), quad bikes (ATV) and trikes
Features :
• Perfect for cleaning, servicing
• Swivel wheels for easy positioning
• Rubber surface with oil drain hole
• Operated with hydraulic foot pedal
• 4 locking positions
Application :
• Hydraulic scissor motorcycle Lift is Ideal for MXDirt Bikes (motocross)
Specification
Max. Capacity (kg/lbs)
135/ 300
Max. Height (mm)
895
Min. Height (mm)
355
Platform Size (mm)
410x350
Nett Weight (kg)
32
Gross Weight (kg)
35
Order No.
KW1900953
140
Type
Description
KW19-953
Hydraulic Motorcycle Lift Table 135kg,
Stand Type
Order No.
KW1900955
Type
Description
KW19-955
Motorcycle and ATV Lift Table 750kg,
Floor Type
Bike Lift
MOTORCYCLE EQUIPMENT
MOTORCYCLE LIFT
Features for and KW19-362:
• Working Press : 110 ~ 120psi
• Air Consumption: 9cfm (255ℓ/m)
800lbs/363KG
KW19-361
1000lbs/454KG
Capacity
Type
KW19-362
(kg) (lbs)
Min
Height
(mm)
Max.
Height
(mm)
Weight
(kg)
Packaging
(cm)
KW19-361
363
800
205
780
113
150 x 69 x 25
KW19-362
454
1000
195
780
158.5
210 x 81 x 24
Order No.
Type
Description
KW1900361
KW19-361
Pneumatic Bikelift 363kg/800lbs
KW1900362
KW19-362
Pneumatic Bikelift 454kg/1000lbs
Motorcycle Tyre Changer
le
ilab ur
Avaed Colo
for R
Clamping: 6”-24”
Humanization designed
mount and demount head
special for motorcycle
Features :
• Semi-automatic
• 20” large turntable and powerful motor
• Suitable for the tyre flatness ratio than 45%
• Also can be used for car wheel
Specification
Semi-automatic Side Swing Arm
Motor Power (kW)
0.75
Power Supply (V)
220
Max. Wheel Diameter (Inch (mm))
38 (960)
Max. Wheel Width (Inch (mm))
13” (330)
Clamping (inch)
6 ~ 24
Air Supply (bar)
8
2500
Bead Breaker Force (kg)
Noise Level (dB)
Package Size (mm)
<75
960 x 760 x 880
195/171
Weight (kg)
Order No.
Type
KW1900967 KW19-967
Turntable suitable for
motorcycle, adjustable
clamp
Motorcycle Wheel Balancer
Features :
• High mechanical principal axis per
form the heat treatment processibility to make sure the precision of repeated
measure
• High accurate and high stable inte
grated circuit, self-calibration and diagnosis functions
• Also can used for car wheel
• LED numeric display screen
• Self-calibration and
diagnosis
www.kawanlama.com
• Rim size available from 10”-24”
Description
Motorcycle Tyre Changer 6”-24”, 750W, 1Ph
Specification
Motor Power (kW)
Power Supply (V/Hz)
Balancing Accuracy (g)
Balancing Speed (rpm)
Rim Diameter (Inch/mm)
Rim Width (Inch/mm)
Measuring Time (sec)
Noise Level (dB)
Operating Temperature Range (°C)
Carton Size (mm)
Weight GW/MW (kg)
Order No.
Type
KW1900975 KW19-975
65
0.2
220/50
1
<200
10~24
254 ~ 610
1.5 ~ 20
40 ~ 508
<10
<70
-5 ~ 50
915 x 760 x 1230
112/88
Description
Motor Cycle Wheel Balancer
10”-24” 200W, 1Ph
141
MOTORCYCLE REPAIR TOOL
Special Tools For Honda Motorcycle
KW19-638 contains :
2
1
4
6
9
8
7
10
12
11
1718
15
4
5
3
16
No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
142
37
Description
Valve Spring Compressor
Valve Spring Compressor Parts
Valve Adjust Wrench
Long Joint Pole
Magneto Sleeve Wrench 20x24mm
Magneto Sleeve Wrench 30x32mm
Magneto Remover
Magneto Remover
Magneto Remover
Magneto Fixer
Open Wrench
Magneto Clamp
Oil Seal Assembler
Oil Seal Assembler
Oil Seal Sleeve
Display Tool Shelf
Gear Wheel Clamp
Gear Wheel Clamp
Combination Sleeve
Crankcase Fixing Tool
Crankcase Fixing Tool
Assemble Set
Puller
Chain Remover
Valve Pole
Valve Pole
Valve Pole
Valve Pole
Back Shock Compressor
Steel Pan
Back Shock Fixer
Back Shock Fixer Parts
Nut Wrench 30x40mm
Wrench 39x41mm
Clutch Spring Compressor
Nut Wrench
Display Tool Shelf
Tool Box
23
19
13 14
20
21
22
26 27
24
25
31
30
28
34
33
35
29
36
38
This special tools are only for Honda
motorcycle, for repair and service purposes.
Order No
Type
KW1900638
KW19-638
Description
Special Tools for Honda
Motorcyle (38 pcs)
32
Special Tools For Yamaha Motorcycle
This special tools are only for Yamaha motorcycle,
for repair and service purposes.
38
21
KW19-639 contains :
2
1
7
10 11
12
13
9
8
14
18
5
4
3
15 16
24
25
35
23
26
27
19
33
30
31 32
34
28
22
No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
Description
Valve Spring Compressor Part A
Valve Spring Compressor Part B
Valve Spring Compressor Part C
Valve Adjust Wrench
Magneto Remover
Crank Assembler
Crank Assembler
Crank Assembler
Hole Punch , Assembler Part A
Hole Punch , Assembler Part B
Hole Punch , Assembler Part C
Clutch Fixer
Wrench
Wrench
Oil Seal Assembler
Steel Pan
Clutch Fixer
Wrench
Display Tool Shelf
Chain Remover
Wrench
Magneto Assembler
Magneto Assembler
Pin Punch
Pin Punch
Puller
Piston Remover
Oil Seal Remover
Puller
Puller
Rotor Remover
Wrench
Rotor Remover
Nut Puller
Puller
Display Tool Shelf
Tool Box
Order No
Type
KW1900639
KW19-639
Description
Special Tools for Yamaha
Motorcyle (39 pcs)
37
29
6
20
36
39
17
www.kawanlama.com
143
Special Tools For Suzuki Motorcycle
This special tools are only for Suzuki motorcycle,
for repair and service purposes.
7
4
15
KW19-640 contains :
2
3
1
4
6
No.
Description
1
2
Valve Remover Sleeve
3
Remover Sleeve Set
4
Rotor Remover Tool
5
6
Clutch Fixer
7
Display Tool Shelf
8
Valve Adjust Wrench
9
Oil Seal Assembler
10
Fixclamp
11
Timing Chain Remover
12
Bearing Remover
13
Crank Assembler
14
Oil Seal Assembler
15
Display Tool Shelf
16
Crank Assembler
17
Wheel Remover
18
Big Chain Remover
19
Bearing Remover
20
Bearing Remover
21
Bearing Remover
22
Hammer
23
Multi Function Assembler
24
Piston Tools
25
Toolbox
Order No
5
Type
KW1900640 KW19-640
10
8
11
14
13
16
9
12
19
25
20
21
22
23
17
144
18
24
Description
Special Tools for Suzuki
Motorcyle (25pcs)
PART WASHER, SEAT CREEPER
AND HOSE REEL
PART WASHER
PBD3222A
PBC4828
PBD2622A
Second stage
filtration
provides further
purification by
removing oil
and grease
First stage filtration
removes heavy solids
Order No
-
PBD3222A
Dual
Drum
10H x32W x22D
20
PBC4828
Dual
Square
14Hx48Wx28D
20
325
325
39Hx36Wx26D
63
PBD3209
PBDH3222AEUR
Included
Optional
45Hx52Wx32D
75
PBD3209
PBCH4828EUR
Included
Optional
SEAT CREEPER
Type
PBD3222A
PBC4828
PBD2622A
PBC3222A
PBC16
PBD2622A
Dual
Drum
7Hx26Wx17D
10
120VAC, 60Hz
210
50
34Hx30Wx21D
53
PBD3202
PBDH2622AEUR
-
Description
Part Washer
Part Washer
Part Washer
Part Washer
Part Washer
PBC3222A
Dual
Square
10Hx32Wx22D
20
PBC16
6Hx15Wx16D
5
325
210
39Hx36Wx26D
63
PBD3209
PBCH3222AEUR
Included
Optional
10Hx17Wx23D
23
-
HOSE REEL
YA730D
Features :
• Unique drop in frame
• eqoxy coated
Benefits :
• Allows for ultimate shoulder clearance
• Prevent rusting
Oil, Gas and Mining, Automotive, Aviation, Heavy Industry and Power Generation.
Order No
SO000001
Type
JCW43A
PBC16
Dual Filter Washer
• Composite dual stage filter provides continuous filtration of solvent
• Tubs are constructed of 16 gauge steel and feature an added lip fo strength
• Complete with work lamp and flexiblespout (except for PBD34A)
Dual Stage Filter
Specification
Filtration
Base
Interior Dimensions, Inches
Fluid Requirements, Gallons
Input Power Requirements
Pump Volume, Gallons/hour
Output Pressure, psi
Overall Dimensions, inches
Open Height, inches
Replacement Filter
European Models, 230VAC, 50Hz
PBD1751 Parts Tray
PBA720A Drain Table
PBC3222A
Description
Speciality Multi Adjusatable Creepers
www.kawanlama.com
YA729B
YA730D heavy duty air/water hose
reel.
• 50’ of 3/8” ID low pressure hose
• Adjustable ball stop
• 24” connecting hose
• High carbon steel retraction
spring
• Guide arm adjusts to 4 positions
Order No
-
Type
YA730D
YA729B
YA729B Hose Reel.
• 30’ of 3/8” ID low pressure hose
• Adjustable ball stop
• 12” connecting hose
• Metal construction
• Max. pressure 300 psi
Description
Heavy Duty Air/Water Hose Reel
Hose Reel
145
BATTERY CHARGER and WIRE BRUSH
4
BATTERY CHARGER
Specification
Output Currents ADC
Output Voltages VDC
Switch Positions
Continuous Input Current (Max), Amps
Crank Assist Input Current (Max), Amps
Input Voltage (Rated), VAC
Crank Assist Rating, ADC
Crank Assist Duty Cycle
Crank Assist On Time (Seconds)
Crank Assist Off Time (Seconds)
Boost Rating, Amps
Dc Lead Type
Dc Lead Length
Dc Lead Gauge
Dc Clamps
Ac Cord Length, Feet
Ac Cord Gauge
Ammeter
Voltmeter
Timer
Ac Circuit Breaker
Dc Circuit Breaker
Rectifier
Ventilation
No. of Charge Rates
Wheel Size, Inches
Weight, Lbs.
Dimension L Xw Xh, Inches
Outdoor Use
Power Supply Cord
60/15/4
6/12/24
3 switches - 64
Combinations
14.6
66.5
120
300
1/36
5
180
300
Fixed
7’6”
4 AWG
500A
9
14-3
None
Digital
Digital
Self-Resetting
Self-Resetting
8 SCR
Fan Cooled
3
10
86
20.4 x16.5 x30.5
yes
Included
EEBC 500
Order No
-
Type
Description
EEBC 500 Battery Charger Plus
EEBC500 Battery charger plus.
• Adaptive: Standard automotive, deep-cycle, AGM and gel cell
batteries each require a different charging cycle
• Versatile: Charges 6, 12 and 24 Volt batteries with 4, 15 and
60 Amp charging rates
• Convenient: GFCI outlets for auxiliary power to lights and other
accessories: handy storage compartment for optional battery
hand tools
• Smart: Fully automatic operation: microprocessor-controlled
algorithms optimize the charge cycle without overcharging.
Includes manual mode for timed charging
• Powerful: 300 Amp engine starting power
• Hi-tech: Exclusive flash reprogramming power supply maintains
consistent OEM specified voltage
• Informative: Digital display: voltage, % of charge and alternator
% of performance
• Professional: Rugged, streamlined design. Higher working height
handle helps relieve stress on lower back
• SS3151 product information DVD
WIRE BRUSH
WBBS2
WBSS2
WBSS3
Wire Brushes
• Ergonomic cushion grip handle designed for maximum comfort and control
• Use with both hands to maximize pressure
• Heavy 28 gauge stainless gives units maximum strength and durability
• Choice of brush width and length allows you to cover a wide
range of applications
Applications:
• Ideal for cleaning rusted threads, battery terminals and gaskets
• Removes body rust prior to welding on various metal parts
• Cleans off caulk and interpanel grinding welds
Stock No.
WBBS2
WBSS2
WBSS3
WBSS5
WBSS8
WBSS14
WBSET
WBSS5CAL
WBMSSET
WBSS2BKT
WBBS2BKT
146
WBSS5
WBSS8
WBSS9
WBSS14
WBSS5CAL
Description
2inch Miniature Brass Wire Brush
3inch Stainless Steel Wire Brush
5inch Stainless Steel Wire Brush
7 3/4inch Stainless Steel Wire Brush
Includes (2) Wbbs2 Miniature Brass Wire Brushes And
(1) Wbss2 Miniature Stainless Steel Wire Brush
11 Inch Stainless Steel Wire Brush
Includes (1) WBSS8 Stainless Steel Wire Brush (1) WBSS9 Stainless Steel Wire Brush
(1) WBSS14 Stainless Steel Wire Brush And (1) WBSSET Wire Brush Set
Includes (25) WBSS2 Stainless Steel Wire Brushes
Includes (25) WBBS2 Brass Wire Brushes
WBSS2BKT
WBBS2BKT
BATTERY TESTER
BATTERY TESTER
The battery system testers use conductance technology to quickly provide the technician with the state
of health of the battery, the starting system and the charging system. Select from 4 models for a good,
better, best line up. One unit has a built in printer and another uses a wireless infra red printer. Some
include on-screen commands in up to 7 languages.
Electronic Battery Testers
EECS500
Specification
CCA Range
Testing Method
Displays Battery % Available Capacity
Displays Battery Condition
Tests Discharged Batteries
Displays Battery State of Charge
Tests 12V Batteries
Test 6V and 12V Batteries
Tests Flooded/AGM/Gel Cell Batteries
Battery Recharge Indicator
Reverse Polarity Protection
Detects and Displays Bad Cell
Surface Charge Warning
Tests 12V Starter/Charging Systems
Tests 12/24/36V Starter/Charging Sytems
Internal Lead Set Diagnostics
Detects Alternator Ripple
Temperature Compensation
Loose Lead Detection
International Unit Conversion EN, JIS, EIC, DIN
Tests Parallel and Series (24V) Battery Packs
Printer Capable
Store Test Data For Review And Print Out
English, Spanish, French Languages
Custom Header With Date And Time
Display
Cable Length, inches (mm)
Parasitic Drain Function
Retention Magnet
Product Information DVD
EECS500
100-1,400
Conductance
CCA
•
•
•
•
•
•
•
Protect And Detect
•
•
Displays Volts
•
•
•
•
Infrared Internal Printer
•
7 Languages
•
2 Line 16 Character
36 (914.4)
•
SS3152
YA2636
YA2636
100-3,500
Conductance
% and CCA
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
IR Printer
•
•
•
16 Character LCD
48 (1,219.2)
•
•
-
YA2624
YA2624
390-1,700
Conductance
%
•
•
•
•
•
•
•
•
•
Displays Volts
Displays Volts
Displays Volts
4 Digit LED
48 (1,219.2)
•
•
-
YA2636-4 Infrared USB Adaptor.
• Use to store and print YA2636 test results to a PC or laptop
• Custom software on CD included with kit
HHGA-5 Infrared Printer.
• Infrared printer for YA2636 tester
HHGA-18 Replacement Paper Roll.
• 4 pack of replacement rolls for HHGA-5 infrared printer
EECS500-1 Replacement Paper Roll.
• Paper rolls for EECS500 printer
YA2636-4
www.kawanlama.com
HHGA-5
147
VIDEOSCOPE
VIDEOSCOPE
BK6000
4
BK6000 Video/Still Recording Digital Borescope.
• Records and plays back still images and video clips
• 3 1/2” inch display offers large viewing screen and
2xdigital zoom
• Removable, rechargeable Lithium-ion battery pack
• Can operate BK6000 while charging the battery
• Easy-to-use, multi-language interface
• Mini USB connector for uploading images and video
• External SDHC card slot
• Control handle disengages to allow greater maneuverability
• Audio input jack for recording comments with optional ear bud
and microphone attachment
BK5500
BK5500 Video Inspection Scope.
• Single on/off button and battery indicator
• Convenient thumb control for LED light intensity
• 2 3/8” color LCD provides a larger viewing image than
eyepiece borescopes
BK6000/BK5500 Shared Features.
• 8.5mm diameter imager head fits into most spark plug holes
• High intensity LEDs direct light where it is needed
• 36” long obedient shaft for added reach
• 3/4” shaft bend radius for great flexibility
• 320 x240 display resolution
• 720 x480 imager resolution when using the video-out port to an
external monitor
• Close focus range from 1/2” to 12”
• Quick-change connector enables use of optional length,
specialized purpose imagers
• Integrated stand and hanger for flexible positioning
BK6000/BK5500 Applications:
• Ideal for engine, A/C, under dash, suspension and
transmission work
• Inspect cylinder bores and valves through the spark plug hole
• Examine for gear wear in differentials and manual transmissions
• View inside door and body panels to check for malfunctions,
defects and hidden damage
• Inspect under dash for electrical routing, HVAC actuator
operation and radio code verification
• Locate fluid leaks without a direct line of sight
BK5500-7
Stock No.
BK5500-1
BK5500-2
BK5500-6
BK5500-7
BK5500-8
BK5500-9
BK5500-10
BK5500-12
BK5500-13
BK5500-14
BK6000-1
BK6000-2
BK6000-6
BK6000-10
BK6000-11
BK6000-12
BK6000-13
-
148
BK5500-9
BK5500-10
Description
36” Imager (8.5mm Head)
Mirror and Magnet
Blow Molded Case
Video Out Cable
36” Blue Light/UV Imager (8.5mm Head)
Dual Imager (Mm Head)
36” View Imager (5.5mm Head)
Digital Video Recorder
Battery, Lithium Ion
S-Hook
Blow Molded Case
Battery Charger
Earbud and Microphone
USB Cable
Kick Stand
(4) Aa Batteries
Warranty
Instruction Manual
Included with
BK5500
•
•
•
•
•
2 Years
•
BK5500-12
Included with
BK6000
•
•
•
•
•
•
•
2 Years
•
BK5500-13
Accessory for
BK5500
•
•
•
•
•
•
-
BK5500-14
Accessory for
BK6000
•
•
•
•
•
•
-
FLASHLIGHT
Inova T-Series
T1
FLASHLIGHT
Engineered with the professional in mind, INOVA T-Series has designed
with 3-way tactical end-position switch. It’s a compact high performance,
palm sized LED flashlight, and small enough to fit in a uniform pocket but
powerful enough to shoot a beam up to far-reaching 200-300 feet (depend
on the type). It’s also equipped with optical system that provides thermal
management while harnessing and projecting a powerfully bright uniform
focused spot and flood beam.
T2
The Inova T1 fits conveniently in a uniform shirt
pocket, but that is by no means its only attribute. Constructed of strong aerospace grade
aluminium, this palm size LED flashlight shoots
a powerful beam up to a far reaching 200 feet.
Engineered with the professional in mind, the
T1 has a patented, end position, tactical switch
to enhance overhand operation, and a handy
lanyard hole for added transport options. The
ideal size flashlight under any circumstances.
T3
The dark presents difficult challenges for those
who protect and serve. The Inova T2 is equipped
with a patented precision optical system that
brightly illuminates objects up to 250 feet away.
This best in class LED flashlight is ruggedly built to
withstand extra hard use and environmental forces
that lesser flashlights cannot. No matter what the
measure, the T2 stands alone in materials, design,
engineering, manufacturing and performance. A
confidence inspiring tool to carry on duty everywhere.
Among the tools professionals count on most
is a flashlight. The Inova T3 LED flashlight provides the strategic balance of durability, compact size and powerful light performance they
are looking for. By incorporating advanced
technology and high quality materials, the T3
is capable of projecting a highly intense beam
of light up to 300 feet. Easy to store, carry and
handle, it is an invaluable asset for those who
must face threatening situations.
Features:
• Patented precision optical system, provides thermal management while harnessing and projecting a powerful beam
• Electronically controlled, advanced electronic circuitry provides uniform light output
• Aerospace grade aluminium body, machined from solid bar stock (not extruded tubing) with high grade anodized finish
• Double-sided ar coated glass lens, optical window has teflon seal to withstand environmental pressure
• Aggressive knurling, provides a positive, non-slip grip for sure handling
• O-rings, compression sealed throughout, and threads are anodized for reliability
• Batteries, lithium batteries with a 10 year shelf life included
• Construction, shockproof, crushproof and water resistant
• Tactical switch, the tactical end-cap activates momentary on, constant on/off and lockout mode
XO3-WT LED Flashlight
XO3
Features:
• Patented precision optical system, Provides thermal management while
harnessing and projecting a powerful beam
• Electronically controlled, Advanced electronic circuitry provides uniform
light output
• Lifetime LED, High-powered, energy-efficient LEDs
• Aerospace-Grade Aluminium body, Machined from solid Bar stock (not
extruded tubing) with military spec, Type III hard coat anodized finish
• Impact-Resistant, Stainless-steel head protects optical system
• O-Rings, Compression sealed throughout, and threads are anodized for
reliability
• Batteries, Lithium batteries with a 10 year shelf life included
• Construction, shockproof, crush proof and water resistant
• Tactical Switch, The tactical end-cap activates momentary
Specification
Length (mm)
Diameter (mm)
Weight (oz)
LED Rating
Battery Type
Run Time
T1
4.56’’/115.824
1’’/25.4
3.99
The Inova XO3 is the choice of the world’s most elite covert operations
teams. Precision engineered for protection against the elements and extreme use, it offers visibly superior light projection and rock solid reliability.
Whether on critical missions in far off lands, or back roads touring in a motor
home, the XO3 offers a steady stream of far reaching and intense light to
blaze the way.
Order No
IV0000015
IV0000016
IV0000017
Type
T1WB-MP
T2WB-MP
T3WB-MP
IV0000010
X03-WT
T2
T3
Description
White LED Black Case
Spotlight Titanium Body White LED
123A Lithiun Batt
X03
5.5’’/139.7
6.2’’/157.48
6.0”/152.4
1.1’’/27.94 (Front)
1.24’’/31.496 (Front)
1.24’’/31.496 (Front)
0.865’’/21.971 (Rear)
1’’/2.54 (Rear)
1’’/2.54 (Rear)
4.13
6.17
5.57
4.8Watt
4.8Watt
6.0Watt
5.8watt
2-123A Lithium
2-123A Lithium
3-123A Lithium
2-123A Lithium
Up to 5hrs
Up to 4hrs
Up to 3.5hrs
Up to 2.5hrs
Effective Range
200Feet
250Feet
300Feet
250Feet
Signal Visibility
2Miles
2.5Miles
3Miles
3Miles
www.kawanlama.com
149
Conversion Table
Length
cm
feet
inch
km
league
league
(nautical)
metre
mile
milimetre
yard
1
0.03280
0.394
0.00001
0.000002
0.000001
0.01
0.000006
10
0.010936
30.48
1
12
0.00030
0.000063
0.000054
0.304
0.000189
304.8
0.33
2.54
0.083
1
0.00002
0.000005
0.000004
0.025
0.000015
25.4
0.027
100000
3281
39370
1
0.020
0.179
1000
0.621371
1000000
1094
482804
15840
190080
4.828
1
0.868
4828
3
4828040
5280
555600
18228
218740
5.55
1.15
1
5556
3.452
5556000
6076
100
3.280
39.37
0.001
0.000207
0.000179
1
0.000621
1000
1.1
160934
5280
63360
1.609
0.33
0.29
1609
1
1609340
2.7777
0.1
0.003
0.040
0.000001
2.07
1.8
0.001
6.21
1
0.001
91.44
3
36
0.00091
0.000189
0.000164
0.9144
0.000568
914.4
1
Weight
Power
grain
gram
kilogram
lbs
ounce
pound
ton
1
0.0647
0.000064
0.000142
0.002
0.000142
6.48
15.432
1
0.000999
0.002
0.035
0.002
10
15432
999.976
1
2.20
35.27
2.20
0.00099
7000
453.592
0.453
1
16
1
0.00045
437.5
28.349
0.028
0.062
1
0.062
0.00003
7000
453.592
0.453
1
16
1
0.00045
15432358
1000000
1000
2205
35274
2205
1
Horsepower
kiloWatt
(electric)
Watt
1
0.75
746
1.34
1
999.64
0.001340
0.000746
1
Volume
cm3
m3
liter
inch3
foot3
yard3
gallon (UK)
Drum
(metric,petroleum)
Barrel (UK)
1
0.000001
0.001
0.061
0.000035
0.000001
0.000219
0.000005
0.000006
1000000
1
1000
61024
35.3
1.30
220
5
6.11
1000
0.001
1
61.024
0.035
0.001
0.219
0.005
0.006
16
0.000016
0.016
1
0.000565
0.000020
0.003
0.00008
0.00009
28317
0.028
28.3
1728
1
0.037
6.2
0.141
0.17
764555
0.764
764.5
46656
27
1
168
4
4.6
4546
0.0045
4.5
277.4
0.160
0.005
1
0.022
0.027
200000
0.2
200
12205
7
0.26
44
1
1.22
163659.24
0.16
164
9987
5.78
0.21
36
0.8
1
Temperature
Power
Degree
celcius
Degree
fahrenheit
Degree
rankine
Degree
reaumur
Kelvin
1
33.8
493.47
0.8
274.15
-17.22
1
460.674
-13.776
256
-272.60
-458.68
1
-218.08
0.55
1.25
34.25
494
1
274.4
-272.15
-457.87
1.8
-217.72
1
Horsepower
kW
Horsepower
kW
1.341022
0.7457
8.046132
4.4742
2.682044
1.4914
9.387154
5.2199
4.023066
2.2371
10.728176
5.9656
5.364088
2.9828
12.069198
6.7113
6.705110
3.7285

4 - Kawan Lama E-book

Transcription

Similar documents

Tactair Paris Air Show Evite 2015

Geartek email brochure

Four Directional Sideloading Forklift

TUXEDO flyers

Product Brochure

Haul Master - Prairie Sky Equipment Ltd.

VL-Whisper - Clay

PlanWheel XLU3 Spec Sheet MASTER

ECOLift - Stertil Koni USA

Motorcycle Wheel Balancing and Truing Stand Assembly Instructions