duramaxx - Cimline

DURAMAXX
TRUCK MOUNTED PATCHER
• Truck mounted
convenience
• In-Cab operation
• Venturi Feed System
• 5 yd. aggregate hopper
Potholes are the most visible and complained about issue
in the pavement industry today. Address this epidemic
with Spray Injection Patching. Proven to be up to 10
times more effective than any other type of patch repair.
The Spray Patching Process- The spray patcher removes
the pothole in one quick and cost effective 4 step process.
1. Clean the area with
compressed air. 2.
Apply an emulsion
tack coat. 3. Fill the
hole
with
coated
aggregate. 4. Cover the
finished patch with dry
aggregate so traffic can
resume immediately.
Truck Mounted Convenience- All the same features as
the trailer patcher but with truck mounted convenience.
No need to feed rock from the tow vehicle. Especially
useful in low clearance residential streets or areas with
tight turning radiuses. The large on-board 5 yd aggregate
hopper keeps operators out working with less refills.
In-Cab Operation- Keep your operators in the truck
for maximum safety, comfort and productivity with the
DuraMaxx. Convenient joystick controls allow the operator
to drive to the pothole, activate the Spray Injection System
and maneuver the nozzle accurately over the repair area.
When traveling, the boom folds flat against the front
bumper. Owners report fast return on investment with this
permanent, one-man pothole repair solution.
866-607-2824
Vent-Flo Nozzle- The specially designed Vent-Flo Nozzle
properly coats the aggregate with the right amount of
emulsion. The mix is applied at an angle to the patch allowing
maximum placement and best operator safety. The vent holes
diffuse/slow down the airstream to minimize rock overspray
and maximize placement into the repair.
Venturi Feed System- The DuraPatcher system utilizes
virtually no moving parts in the delivery system. A high
volume low pressure blower creates an airstream to
both clean the repair area and deliver the aggregate to
the patch. No augers, conveyors or other wear parts are
required making the system the most reliable in the industry.
Aggregate is gravity fed from the hopper completing the low
maintenance package. Since there are no moving parts, there
is no adjustment when changing the size of aggregate. The
DuraPatcher system will deliver aggregate up to 2.5 inches
in diameter without plugging.
Heated Emulsion Tank- The 300 gallon pressurized onboard emulsion tank provides enough product to apply over
10 tons of patch before refilling. The unique heating blankets
and thermostat allow the patcher to be plugged in during
non-patching times to keep emulsion at a “ready-to-go”
temperature. Unlike heating probes, blanket heating allows
100% capacity emulsion usage and also preheating of the
empty tank prior to filling. No pumps are required to apply
the emulsion.
“Your Pavement Maintenance Specialists”
www.cpmg.info
Operator enjoys excellent visibility
to accurately guide the nozzle and
assure a perfect patch every time.
Joystick controls allow one-person
in-cab operation of three section boom
and material flow to speed repairs.
Integrated 300 gallon emulsion tank
and 5 cubic yard aggregate hopper
allow high volume production.
Engine and Powerplant- Reliable John-Deere diesel engines provide power coupled
to a 450CFM blower for all day performance. An on-board pressurized diesel flush out
system makes clean up at the end of the shift a job that takes less than one minute.
An on-board oil heat exchanger keeps the emulsion tank at working temperature
during use.
Let your DuraPatcher specialist provide you with more information on the many
options available to meet your special needs or to set up a demonstration.
SPECIFICATIONS
Emulsion Capacity (US gallons):
300
Aggregate Capacity:
5 yards
Engine:
74HP IT4 John Deere diesel
Heating Method (overnight):
Electric Blanket
Heat Rating (watts):
2 x 1500 W
Tank Insulation:
R 15
Blower:
450 CFM at 1500 RPM, 10 PSI
Construction:
10” channel main frame
Clean Out:
15 gallons
Fuel Capacity:
18 gallons
Dimensions w/ Chassis (l x w x h):
28’ 6” x 8’ 4” x 10’ 3”
Drain Valve:
3 in.
Temperature Gauge:
5 in.
Weight w/ Chassis (lbs):
19,400
Warranty:
Two Year Limited
Boom folds flush with front bumper in
travel mode for unrestricted operator
visibility.
Due to continuous improvement, specifications are subject to change without notice.
Distributed By:
www.cpmg.info 866-607-2824
Rev: 1/13