Globo H - IMI Hydronic Engineering
Transcription
Globo H - IMI Hydronic Engineering
Globo H Ball valves Gunmetal ball valve IMI HEIMEIER / Shut-off valves / Globo H Globo H Globo H is used as a versatile shut-off element in pump hot-water heating systems. Thanks to the compact working radius of the operating toggle, the Globo H is the ideal valve for adjacent installation on distributors. Key features >> The body and the ball are made of >> Operating toggle is outside the >> Tubular body, ideal for continuous >> Also available in Press version corrosion-resistant gunmetal pipe insulation pipe insulation Technical description Globo H heating ball valve is specifically designed to cope with heating technology requirements. The body and the ball are made of corrosion-resistant gunmetal. Ball with smooth straight bore. Versions with female thread from DN 10 to DN 50 and with male/female thread from DN 15 to DN 32. Flat-sealing male thread. Versions with Viega and Mapress press connection from DN 15 to DN 32. 2 Operating toggle which can be dismantled, made of shock resistant plastic with small projection. Since the toggle stop is hidden, there is no danger of injury. Thermometer, retrofittable by simply replacing the red closing cap in the operating toggle, see accessories. Maintenance-free spindle sealing by two O-rings made of EPDM. Ball seal made of pure PTFE. Permitted operating temperature TB 120 °C (248 °F), with press connection TB 110 °C (248 °F). Maximum allowable working pressure PB 10 bar (PN 16). Heat insulation shells for versions with female thread and press connection, consisting of two interlocked half shells, see accessories. Contruction 1. Spindle sealing with two O-ring 2. Solid gunmetal ball Application Globo H is used as a versatile shut-off element in pump hotwater heating systems. Thanks to the compact working radius of the operating toggle, the Globo H is the ideal valve for adjacent installation on distributors. The heating ball valve prevents heat loss as required by the respective energy saving ordinance. This requirement can be easily met by the use of heat insulation shells or with straight pipe insulation in view of the tube-shaped valve bodie. The operating toggle is located outside the heat insulation. The version with male/female thread makes it possible to make a detachable joint using suitable IMI Heimeier screw connections with a threaded, soldered, welded or press nipple. The male thread is also suitable for the use of other flat sealing screw connections with direct clamping or slide joint. Press connection Globo H ball valves with Viega press connection are suitable for copper pipes conforming to EN 1057 as well as Viega Sanpress stainless steel and Prestabo steel pipes. Ball valves with Mapress press connection are suitable for copper pipes conforming to EN 1057. All press connections as well as the valve bodies are made of corrosion-resistant, dezincification-free gunmetal. Suitability press-fitting tools should be verified with the respective manufacturer. We recommend using only Viega press-fitting jaws to make Viega press connections. We recommend using only Mapress press-fitting jaws to make Mapress press connections. 3 IMI HEIMEIER / Shut-off valves / Globo H Sample application 1. Boiler 2. Heating circuit 3. Single storey manifold 4. Air heater 5. Hot water storage Note To avoid damage and the formation of scale deposit in the hot water heating system, the composition of the heat transfer medium should be in accordance with the VDI guideline 2035. For industrial and long-distance energy systems, see the applicable codes VdTÜV and 1466/AGFW FW 510. Any mineral oils contained in the heat transfer medium and lubricants containing mineral oil can have seriously negative effects on the source apparatus and usually lead to the disintigration of EPDM seals. When using nitrite-free frost and corrosion resistance solutions with an ethylene glycol base, pay close attention to the details outlined in the manufacturers’ documentation, particularly details concerning concentration and specific additives. 4 Diagram 20 25 32 40 50 300 3000 20 200 2000 10 100 1000 5 50 500 3 30 300 2 20 200 1 10 100 0,5 5 50 0,3 3 30 0,2 2 20 0,1 0,2 0,3 0,5 1 2 3 5 10 20 30 50 1 100 10 ∆p [mm WS] 30 ∆p [mbar] ∆p [kPa] DN 10/15 œŒ 5 IMI HEIMEIER / Shut-off valves / Globo H Articles With female thread DN 10 15 20 25 32 40 50 Rp3/8 x Rp3/8 Rp1/2 x Rp1/2 Rp3/4 x Rp3/4 Rp1 x Rp1 Rp1 1/4 x Rp1 1/4 Rp1 1/2 x Rp1 1/2 Rp2 x Rp2 Kvs EAN Article No 6,0 6,0 14,0 25,0 42,0 65,0 100,0 4024052123216 4024052123414 4024052123513 4024052123711 4024052123810 4024052123919 4024052124114 0600-01.000 0600-02.000 0600-03.000 0600-04.000 0600-05.000 0600-06.000 0600-08.000 Kvs EAN Article No 6,0 14,0 25,0 42,0 4024052516117 4024052516216 4024052516315 4024052516445 0601-02.000 0601-03.000 0601-04.000 0601-05.000 With male/female thread DN 15 20 25 32 G3/4 x Rp1/2 G1 x Rp3/4 G1 1/4 x Rp1 G1 1/2 x Rp1 1/4 With Viega press connection with SC-Contur DN [mm] Kvs EAN Article No 15 20 25 32 15 x 15 22 x 22 28 x 28 35 x 35 6,0 14,0 25,0 42,0 4024052544318 4024052544417 4024052544554 4024052544653 0602-15.000 0602-22.000 0602-28.000 0602-35.000 With Mapress press connection 6 DN [mm] Kvs EAN Article No 15 20 20 25 32 15 x 15 18 x 18 22 x 22 28 x 28 35 x 35 6,0 14,0 14,0 25,0 42,0 4024052773817 4024052773916 4024052774012 4024052774111 4024052774210 0609-15.000 0609-18.000 0609-22.000 0609-28.000 0609-35.000 Accessories Screw connections with threaded nipple Flat-sealing, for Globo with male thread. L [mm] Made of brass. 29,5 32,5 35 38,5 Screw connections with press nipple Viega press connection with SC-Contur Flat-sealing, for Globo with male thread. Made of gunmetal. Thermometer to replace by changing the red closing cap. Temperatur range from 0 °C to 120 °C. EAN Article No 15 20 25 32 R1/2 R3/4 R1 R1 1/4 4024052516612 4024052516810 4024052517015 4024052517213 0601-02.350 0601-03.350 0601-04.350 0601-05.350 DN Globo Ø EAN Article No 20 21 22 25 29 34 15 15 15 20 25 32 15 16 18 22 28 35 4024052517411 4024052517510 4024052517619 4024052517718 4024052517817 4024052517916 0601-15.352 0601-16.352 0601-18.352 0601-22.352 0601-28.352 0601-35.352 L [mm] DN Globo Ø EAN Article No 37 42 47 47 15 20 25 32 20,8 26,8 33,2 41,8 4024052516711 4024052516919 4024052517114 4024052517312 0601-02.353 0601-03.353 0601-04.353 0601-05.353 L [mm] DN Globo Ø EAN Article No 34 39 42 44 15 20 25 32 15 22 28 35 4024052600519 4024052600618 4024052600717 4024052600816 0675-15.356 0675-22.356 0675-28.356 0675-35.356 EAN Article No 4024052423316 4024052554812 0600-00.380 0600-06.380 4024052460618 4024052554911 0600-01.380 0600-07.380 Screw connections with soldered nipple Flat-sealing, for Globo with male thread. L [mm] Made of brass. Screw connections with welded nipple Flat-sealing, for Globo H with male thread DN Globo DN Globo Red 10-32 40-50 Blue 10-32 40-50 7 IMI HEIMEIER / Shut-off valves / Globo H Heat insulating shell Made of EPP Fire class B2 DN Globo EAN Article No With female thread / press connection 10, 15 4024052573813 20 4024052573912 25 4024052574018 32 4024052574117 40 4024052574216 50 4024052574315 With male / female thread 15 4024052574414 20 4024052574513 25 4024052574612 32 4024052574711 0600-02.553 0600-03.553 0600-04.553 0600-05.553 0600-06.553 0600-08.553 0601-02.553 0601-03.553 0601-04.553 0601-05.553 Dimensions With female thread With male / female thread With Viega press With Mapress press connectionconnection l l l l H H SW1 h D2 D2 D1 D D L3 l1 l1 L d H SW1 d h H h SW1 d h SW2 SW1 d L3 L2 L1 DN D D1 D2 d L L1 L2 L3 10 15 20 20 25 32 40 50 Rp3/8 Rp1/2 Rp3/4 Rp3/4 Rp1 Rp1 1/4 Rp1 1/2 Rp2 G3/4 G1 G1 G1 1/4 G1 1/2 - 15 18 22 28 35 - 26 26 26 26 26 26 32 32 56,0 56,0 58,5 58,5 67,5 76,5 87,5 101,5 64,5 69,0 69,0 78,5 89,5 - 110 115 115 129 139 - 22 23 23 23 25 - L4 99 102 104 118 133 L5 20 20 21 23 26 L5 L5 L4 l l1 H h SW1 SW2 81 81 81 81 81 81 120 120 10,0 10,0 11,0 11,0 13,0 13,5 14,5 15,5 69,0 69,0 72,0 72,0 74,5 78,0 111,5 116,5 54,0 54,0 55,5 55,5 58,0 61,5 92,0 97,0 27 27 32 32 39 50 55 70 29 35,5 35,5 44 51 - SW = Spanner opening The products, texts, photographs, graphics and diagrams in this document may be subject to alteration by IMI Hydronic Engineering without prior notice or reasons being given. For the most up to date information about our products and specifications, please visit www.imi-hydronic.com. 5300-18.483 09.2014
Similar documents
Globo D - IMI Hydronic Engineering
Viega press connection with SC-Contur Flat-sealing, for Globo with male thread. Made of gunmetal.
More information