HAND TOOLS

MWEX08_Page_100-101.qxp
27/6/08
14:28
Page 100
HAND TOOLS
Jenny (Hermaphrodite) Calipers
MW341
MW56
MW336-6
Features
Firm Joint Adjustable Point
• Manufactured from polished tool steel
• A large headed nut and screw assembly provides a firm and rigid
friction joint, with no play
METRIC / IMPERIAL JENNY CALIPERS
Size
125mm / 5"
150mm / 6"
150mm / 6"
Joint Type
Spring
8
8
4
Firm
4
4
8
Code No
MW341
MW336-6
NW56
Pk Qty
5
5
5
• The sizes listed are the effective leg length which is measured
from the joint assembly
• Leg which holds the round adjustable hardened point is offset
• Model 341 has a locating spur on the straight leg
Note: Firm joint caliper capacities are generally 1/3 greater than the
effective leg length
Spring Joint
• Manufactured from polished tool steel
• The marking leg is hardened to over 550Hv at the point
• Bow spring ensures uniform tension over working range
• Centrally mounted adjustment screw offers finer setting than
firm joint type
100
For more information visit www.moore-and-wright.com
Partners in Precision
MWEX08_Page_100-101.qxp
27/6/08
14:28
Page 101
HAND TOOLS
Inside and Outside Calipers
MW526
MW3306
MW3316
MW516
MW506
Standard: BS3123
Outside & Inside Calipers, Firm Joint:
• Manufactured from polished tool steel
• A large headed nut & screw assembly provides a firm & rigid friction
joint, with no play
• The sizes listed are the effective leg length which is measured from
the joint assembly
Note: Firm joint caliper capacities are generally 1/3 greater than the effective
leg length
Outside Calipers, Spring Joint:
• Bow spring ensures uniform tension over working range
• Centrally mounted adjustment screw offers finer setting, than firm
joint type
Inside Calipers, Spring Joint:
• Bow spring ensures uniform tension over working range
• Centrally mounted adjustment screw
• Manufactured from polished tool steel
Note: Firm joint caliper capacities are generally 1/3 greater than the effective
leg length.
Spring Dividers:
INSIDE AND OUTSIDE CALIPERS
Dividers & Inside / Outside Calipers: Spring Joint
Code No
Inside
MW503
MW504
MW506
MW508
MW5010
MW5012
Code No
Outside
MW513
MW514
MW516
MW518
MW5110
MW5112
Code No
Dividers
MW523
MW524
MW526
MW528
MW5210
MW5212
Sizes
mm
75
100
150
200
250
300
Inside Calipers: Firm Joint
Code No
MW3306
MW3308
MW33012
Sizes mm
150mm
200mm
300mm
Outside Calipers: Firm Joint
Code No
MW3316
MW3318
MW33112
MW33118
MW33124
Sizes mm
150mm
200mm
300mm
450mm
600mm
• Manufactured from polished tool steel
• Points are hardened to over 550Hv
• Bow spring ensures uniform tension over working range
• Centrally mounted adjustment screw
Note: The nominal size is the distance between the centre of the roller and the
working ends of the legs.
For more information visit www.moore-and-wright.com
Partners in Precision
101
MWEX08_Page_102-103.qxp
26/6/08
16:30
Page 102
HAND TOOLS
Precision Range Feeler Gauge Sets
MW389M
MW387M
MW911M
PRECISION RANGE
Features
Precision Range:
Standard: DIN 2275
• All blades are hardened, tempered and polished
• Nominal thickness marked on each blade
Safe and Sure® Range:
• An economical range of feeler sets for general
workshop use
• All blades are hardened, tempered and polished
• Nominal thickness marked on each blade
Code
No
MW387M
MW388M
MW389M
MW394M
MW398M
MW391M
MW393M
MW390M
MW395M
MW399M
75mm
100mm
100mm
150mm
300mm
75mm
75mm
100mm
150mm
300mm
No of
Blades
13
13
13
13
13
11
20
20
20
20
Range
Width
0.03-0.50mm
0.03-0.50mm
0.05-1.00mm
0.05-1.00mm
0.05-1.00mm
0.05-0.80mm
0.05-1.00mm
0.05-1.00mm
0.05-1.00mm
0.05-1.00mm
12.7mm
12.7mm
12.7mm
12.7mm
12.7mm
12.7mm
12.7mm
12.7mm
12.7mm
12.7mm
Range
Width
0.05-0.80mm
0.05-0.80mm
0.05-0.80mm
0.05-0.80mm
12.7mm
12.7mm
12.7mm
12.7mm
SAFE AND SURE® RANGE
Code
No
MW912M
MW911M
MW1106M
MW1112M
102
Length
Length
75mm
100mm
150mm
300mm
No of
Blades
10
10
10
10
For more information visit www.moore-and-wright.com
Partners in Precision
MWEX08_Page_102-103.qxp
26/6/08
16:30
Page 103
HAND TOOLS
Feeler Strip 126 Series
Features
Standard: DIN 2275
• Hardened, tempered and polished steel strip
• Nominal thickness marked on each strip
• Sold in packs of 10 only
FEELER STRIP
x 0.01 mm
3
4
5
6
7
8
9
10
15
20
25
30
35
40
45
50
55
60
Length
300mm
300mm
300mm
300mm
300mm
300mm
300mm
300mm
300mm
300mm
300mm
300mm
300mm
300mm
300mm
300mm
300mm
300mm
Width
12.7mm
12.7mm
12.7mm
12.7mm
12.7mm
12.7mm
12.7mm
12.7mm
12.7mm
12.7mm
12.7mm
12.7mm
12.7mm
12.7mm
12.7mm
12.7mm
12.7mm
12.7mm
Code No
MW126M003
MW126M004
MW126M005
MW126M006
MW126M007
MW126M008
MW126M009
MW126M010
MW126M015
MW126M020
MW126M025
MW126M030
MW126M035
MW126M040
MW126M045
MW126M050
MW126M055
MW126M060
Feeler Strip Sets
Features
Standard: DIN 2275
• 20 Piece feeler strip set in wallet
• Hardened, tempered and polished steel strip
• Nominal thickness marked on each strip
FEELER STRIP SETS
Code No
MWFS20M
No of Blades
20
Range
0.03-1.0mm
Length
150mm
Width
12.7mm
For more information visit www.moore-and-wright.com
Partners in Precision
103
MWEX08_Page_104-105.qxp
26/6/08
15:03
Page 104
HAND TOOLS
Screw Cutting Gauges 200
Features
• Traditional Engineers' screw cutting gauge
• Suitable for most standard metric and imperial
thread forms
• Accurately milled angles for precise evaluation of
thread form
SCREW CUTTING GAUGES
Code No
MW200
Angle
60º
55º
47.5º
14.5º
Thread Form
SI, ISO, US Std.
Whitworth
British Association (BA)
ACME
Radius Gauges 206M & 204M
Features
• Accurately milled steel blades
• Designed to check both internal and external radii
• Marked with nominal size on each blade
• Mounted either on a ring or in a steel sleeve
RADIUS GAUGES
Code No
MW204M
MW206M
MW204MA
MW206MA
104
Range of
Radii
0.75 - 5mm
0.75 - 5mm
5.5 - 13mm
5.5 - 13mm
Increments
0.25mm
0.25mm
0.5mm
0.5mm
No of
Blades
18
18
16
16
Type
Ring
Sleeve
Ring
Sleeve
For more information visit www.moore-and-wright.com
Partners in Precision
MWEX08_Page_104-105.qxp
26/6/08
15:03
Page 105
HAND TOOLS
Screw Pitch Gauges 800 Series
Features
• Accurately milled steel blades
• Designed to check both internal and
external thread forms
• Marked with nominal size on each blade
• All blades fixed in a steel sleeve
• Screw cutting gauge included
SCREW PITCH GAUGES
Code No
MW801
Screw Pitch
S.I. Metric
No of
Blades
30
MW809
ISO Metric
22
MW804
S.I. Metric
& Whitworth
49
Threads per mm
0.25, 0.3, 0.35, 0.4, 0.45, 0.5, 0.55, 0.6, 0.65, 0.7, 0.75, 0.8, 0.85, 0.9,
1.0, 1.1, 1.2, 1.25, 1.3, 1.4, 1.5, 1.6, 1.7, 1.75, 1.8, 1.9, 2.0, 2.5, 3.0
0.35, 0.4, 0.45, 0.5, 0.6, 0.7, 0.75, 0.8, 1.0, 1.25, 1.5, 1.75,
2.0, 2.5, 3.0, 3.5, 4.0, 4.5, 5.0, 5.5, 6.0
Metric: 0.4, 0.5, 0.7, 0.75, 0.8, 0.9, 1.0, 1.25, 1.50, 1.75,
2.0, 2.5, 3.0, 3.5, 4.0, 4.5, 5.0, 5.5, 6.0, 6.5, 7.0
Imperial: 4, 4.5, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 16,
18, 19, 20, 22, 24, 25, 26, 28, 30, 32, 36, 40, 48, 60
For more information visit www.moore-and-wright.com
Screw Cutting
Gauge included
60 degrees
60 degrees
60 degrees
Partners in Precision
105
MWEX08_Page_106-107.qxp
9/7/08
16:14
Page 106
HAND TOOLS
Telescopic Gauges 315 Series
Features
• For quick inside measurement and determination of inside
diameters
• Spring loaded plunger that expands in the bore or groove
• Satin chromed body
• With auto extension and direct locking
• Measuring faces are hardened and micro-lapped
Range
8 - 12.7mm
12.7 - 19mm
19 - 32mm
32 - 54mm
54 - 90mm
90 - 150mm
METRIC / IMPERIAL TELESCOPIC GAUGE SETS
Range
8 - 150mm
Quantity
6-pieces
Code No
MW315-01
INDIVIDUAL TELESCOPIC GAUGES
Code No
MW315-011
MW315-012
MW315-013
MW315-014
MW315-015
MW315-016
106
Range
8 - 12.7mm
12.7 - 19mm
19 - 32mm
32 - 54mm
54 - 90mm
90 - 150mm
For more information visit www.moore-and-wright.com
Partners in Precision
MWEX08_Page_106-107.qxp
9/7/08
16:14
Page 107
HAND TOOLS
Angle Meter 946 Series
Features
Standard: Factory Standard
• Made of tool steel
• Satin chromed, engraved scale
• Robust and durable
ANGLE METER
Code No
MW946-01
MW946-02
MW946-03
MW946-04
Length of ruler
120mm
150mm
200mm
300mm
Diameter of scale
80mm
120mm
150mm
200mm
Depth Gauge 43M & 44M
Depth Gauge:
• Available with either reversible base or protractor
• Full range rule adjustment
MW44M
• Readings can be fixed by means of a locknut
• Rules graduated on both sides
Reversible Base Type:
• Accurately ground top and bottom faces allow
base to be reversed, for use in confined spaces
Protractor Type:
• Protractor plate is graduated 0° - 180° - 0° degrees
• Scale resolution 1/2 degree
MW43M
DEPTH GAUGE
Code No
Type
MW43M
MW44M
Reversible Base
Protractor
Total length
of blade
195mm
195mm
Rule
width
5.5mm
5.5mm
Rule
thickness
1.0mm
1.0mm
Front face
graduations
0.5, 1.0mm
0.5, 1.0mm
For more information visit www.moore-and-wright.com
Rear face
graduations
1.0mm
1.0mm
Base Length
18mm, 56mm
79mm
Partners in Precision
107