Abundance of REE-bearing minerals in carbonatite and lamprohyre
Transcription
Abundance of REE-bearing minerals in carbonatite and lamprohyre
GEOLOGIAN TUTKIMUSKESKUS 7/2016 2.02.2016 Abundance of REE-bearing minerals in carbonatite and lamprohyre dikes in Kaulus area, Sokli Carbonatite Complex, NE Finland Thair Al-Ani and Olli Sarapää GEOLOGIAN TUTKIMUSKESKUS 7/2016 2.02.2016 GEOLOGICAL SURVEY OF FINLAND DOCUMENTATION PAGE Date / Rec. no. Authors Type of report Thair Al-Ani Olli Sarapää Archive report Commissioned by GTK Title of report Abundance of REE-bearing minerals in carbonatite and lamprohyre dikes in Kaulus area, Sokli Carbonatite Complex, NE Finland We report mineralogy of the samples collected from the trenches and the drill cores of the Kaulus target, southern side of the Sokli carbonatite complex. The studied samples represent carbonatite and lamprophyre dikes of the Fenite zone. The mineralogy of the samples was examined by using XRD, MLA, EMPA, SEM and light microscope. X-ray diffraction analysis show that weathered materials are mainly composed of quartz, feldspar, carbonates (calcite and dolomite), clay minerals (mainly smectite) and variable amounts of goethite, aegirine tainiolite, phlogopite and monazite. Chemical analyses analyses made by XRF and ICP-MS-methods contain 1.3-9.1 % REE: MLA and SEM results indicate that monazite is the principal REE-phosphate and bastnäsite is the principal REE-carbonate in the studied samples. REE-bearing minerals occur either as isolated grains or small aggregates consisting mainly of the minute needles of crystals. Selected analyses indicate Ce as the most abundant REE-oxide up to 37-46% Ce2O3. Some samples show high BaO and ThO2 values. Keywords Calcite, dolomite, goethite, smectite, tainiolite, monazite, bastnäsite, allanite, pyochlore, carbonatite, lamprophyre Sokli, Kaulus Map sheet U542 Report serial Archive code Archive report 7/2016 Total pages Language 27 English Price Confidentiality public Signature/name Signature/name Thair Al-Ani Olli Sarapää GEOLOGIAN TUTKIMUSKESKUS 2.02.2016 Contents Documentation page 1 INTRODUCTION 1 2 SAMPLES AND METHODS 1 3 MINERALOGY AND GEOCHEMISTRY 3.1 Drill core U5422014R30 3.1.1 Whole rock geochemistry 3.1.2 Mineralogical analysis by XRD 3.1.3 SEM Analysis and Interpretation 3.2 Drill core U5422014R38 3.2.1 Petrography 3.2.2 REE Minerals 3.3 Bedrock samples PAT2 and JVPY-2013 3.3.1 Mineral Liberation Analyzer (MLA) results 3.3.2 Detailed mineralogy by SEM-EDS 5 5 6 6 10 12 12 12 14 14 20 4 CONCLUSIONS 30 5 REFERENCES 30 6 APPENDICES 1 Appendix 1. 32 GEOLOGIAN TUTKIMUSKESKUS 1 2.02.2016 1 INTRODUCTION This work describes mineralogy and alteration features of the REE-bearing crosscutting carbonatite and lamprophyre dikes, and associated fenitic rock within Sokli/Kaulus area. The Sokli carbonatite complex (ca. 360-380 Ma) in northeastern Finland is part of the Kola alkaline province and hosts an unexploited phosphate deposit enriched in Nb, Ta, Zr, REE and U (Vartiainen 1980, Kramm et al., 1993, Korsakova et al., 2012 ). The carbonatite complex consists of the magmatic carbonatite core surrounded by the metacarbonatite and the wide fenite aureole, altogether about 9 km in diameter. The late-stage carbonatite dikes in the central fracture zone and in the fenite zone have high potential for REE mineralisation (Vartiainen, 2001, Al-Ani and Sarapää 2013). Chemical analyses from the drill cores (R301 and R302) show that the carbonatite dikes, 0.5-1.0 m wide in fenites, are enriched in P2O5 (19.9 wt%), Sr (1.9 wt%), Ba (6.8 wt%), Zn (0.3wt%) and have a high total REE content of 0.5-1.83 wt%, including 0.11-1.81 wt% LREE and 0.01-0.041 wt% HREE (Sarapää et al. 2013). Dominant REE-bearing minerals in the Sokli/Kaulus carbonatite dykes are REE carbonates, ancylite-(Ce), bastnäsite-(Ce), Sr-apatite, monazite, strontianite, baryte and brabantite, which are enriched in LREE, P, F, Sr and Ba (Al-Ani and Sarapää, 2013). Mineralogical and chemical evidence demonstrates that late stage magmatic and hydrothermal processes were responsible for the REE mineralisation in the Sokli carbonatite veins and apatite and carbonate minerals were replaced by various assemblages of REE-Sr-Ba minerals (Al-Ani and Olli Sarapää, 2014). 2 SAMPLES AND METHODS The samples for mineralogical and chemical studies were selected from the recent drill core U5422014R30 and U5422014R38, and outcrops from the old trenches of Rautaruukki Oy mapped by Pertti Telkkälä (PAT-2013) and Juuso Pynttäri (JYPY-2013), see the studied area map in (Fig. 1). These outcrop samples were selected by using a gamma spectrometer to find high thorium radiation. Table 1 gives descriptions of the studied rocks and the analytical methods. Light microscope, XRD and Scanning Electron Microscopy (SEM) were used to identify mineralogical compositions of the main carbonate minerals and REE-bearing phases. XRD-measurements was done by Mia Tiljander in GTK Mineralogical laboratory at Espoo. MLA analyse were made at GTK Mintek Outokumpu by Tuula Saastamoinen. All the samples are dominated by calcite and dolomite with minor to trace amounts of Fe-Ti oxides, pyrite and carbonates, K-feldspar, albite, alkaline pyroxenes, strontianite and barite. REE-bearing phases are dominated by monazite, bastnäsite, ancylite and apatite, pyrochlore(Nb) and thorite (Th). Three different groups of samples were prepared for the mineralogical studies (Table 1). The first group, including four weathered carbonatite samples from the drill hole U5422014R30 (Fig. 2), were pulverized for XRD analysis using a Siemens D500 diffract meter with a step size of 0.02° 2θ (and a counting time of 1 s per step, applied over a range of 5–80° 2θ (Appendix 1). The mineralogical study of these samples has been made by using a combination of X-ray diffraction (XRD) and scanning electron microscopy (SEM) with an EDX system. These samples were chemically analyzed by Labtium Analytical Laboratories (order 47667). The major and minor elements of drill cores were determined by XRF GEOLOGIAN TUTKIMUSKESKUS 2 2.02.2016 (Method 175X, 811L) and determination of the rare earth elements and trace elements by ICP-MS (Method 306PM) . The analytical data of representative samples are presented in Table 2. Rare earth element (REE) data from the different carbonatite units have been plotted in chondrite normalized diagrams (normalized to chondrite values of Boynton (1984) to visualize trends and signatures (Fig. 3) Figure 1. Location of the studied drill holes and in the high density thorium aeroradiation map the Kaulus area. GEOLOGIAN TUTKIMUSKESKUS 3 2.02.2016 Figure 2. Black and brown weathered REE-rich carbonatite in the drill core U5422014R30. GEOLOGIAN TUTKIMUSKESKUS 4 2.02.2016 The second group of drill core samples (U5422014R38) include mafic fenite and porfyric carbonatite and lamprophyre dikes, polished thin sections were prepared for light microscopic investigations and REEmineral identification by using a Scanning electron microscopy (SEM-BSE). The outcrop samples, the third group (PAT, JVPY-2013) were studied for heavy minerals. Each sample was separated by mechanical sieves into two grain-size fractions, including material greater than 90 µm and 32 to 90 µm. Heavy minerals (minerals with density > 2.75 g/cm3) were separated from each fraction with heavy liquids and prepared into polished sections for mineral and texture characterization. Mineralogy of heavy-mineral fractions was determined through Mineral Liberation Analyser (MLA) to identify and quantify minerals and to determine their association and distribution. The data of modal mineralogy obtained by this Scanning electron microscopy (SEM) was used to identify the chemical composition crystal morphology of REE-bearing and accessory minerals Table 1. Application of different type of studied samples and lithological observations from Sokli/Kaulus area. Sokli/ Kaulus Sample_ID Weathered carbonatite from the drill hole R30 analyzed by XRD and SEM Description U5422014R30/ 4.40 U5422014R30/ 7.40 U5422014R30/ 8.90, U5422014R30/ 14.40 Drill core samples analyzed by light microscopes and SEM Black weathered carbonatite, high in REE, Mn, Zn, Nb, Th, Fe, P Brown weathered carbonatite REE-rich Dark brown weathered carbonatite REE-rich Brown weathered carbonatite REE-rich U5422014R38(12.4) U5422014R38(31.8) U5422014R38(49.35) U5422014R38(55.40) U5422014R38(66.85) U5422014R38(77.70) Trench sampling concentrate for heavy minerals analyzed by light microscopes and SEM Fenitic amphibolite Dark brown carbonatite dike Light green lamprophyre dike Light green porphyric lamprophyre dike Light brown lamprophyre dike Greenish lamprophyre dike Samples were screened in two fraction 32 to 90 µm and +90 µm PAT2-2013-3.1 PAT2-2013-3.1 PAT2-2013-7.1 PAT2-2013-8.1 JVPY-2013-14.2 JVPY-2013-14.2 Fine fractions (32-90 µm) Brown weathered carbonatite Coarse fractions (+90 µm) Coarse fractions (+90 µm) Fenite Coarse fractions (+90 µm) Fenite Fine fractions (32-90 µm) Brown weathered carbonatite Coarse fractions (+90 µm) GEOLOGIAN TUTKIMUSKESKUS 5 2.02.2016 3 3.1 MINERALOGY AND GEOCHEMISTRY Drill core U5422014R30 Four samples were selected from black weathered carbonatite, rich in Fe, P, Mn, REE, Zn, Nb and Th for chemical and mineralogical X-ray powder diffraction, SEM-EDX and image analyses. Table 2. REE, trace (ppm/306 PM), P, Fe (% 175X) and elements ratios of the R30 drill cores in Kaulus/Sokli carbonatite. Drillhole Sample (6-7) R30 (7-8) (2-3) (3-4) (4-5) (5-6) (8-9) (9-10) (10-11 Ce 7600 10100 25600 52900 45300 12000 22700 14800 7080 5260 13800 10200 La Dy 2950 180 4370 193 17500 204 33900 155 27200 429 7460 258 11900 381 7670 472 3800 445 2560 164 5970 230 3990 234 Er 51.1 54.3 56.9 45.2 111 77.4 112 117 106 41.7 60 63.3 Eu Gd 178 445 208 502 234 605 277 747 378 1060 245 623 470 1150 420 1080 329 873 175 413 253 597 213 526 Ho Lu 24.5 5.13 25.9 3.85 26.4 4.05 18.6 2.29 57.5 4.54 35.4 5.05 51.1 6.46 61.2 7.03 56.9 5.41 20.8 1.9 29.4 2.59 31.1 4.35 Nd 4200 4820 7560 12900 12000 5340 9760 7030 5210 3740 6390 5330 Pr Sc 993 28.8 1200 19.6 2340 30 4300 20.6 3830 23.1 1460 26.8 2560 33.9 1750 24.8 1210 18.6 864 9.11 1580 11.2 1270 20.8 Sm Tb 691 45.7 798 49.9 941 55 1280 53.6 1440 106 920 63 1740 103 1460 116 1070 104 654 42.3 1020 58.5 856 56.1 Tm Sum_REE Eu/Eu* 4.81 17401 4.74 22357 4.7 55160 2.73 106597 7.46 91958 7.07 28532 9.73 50993 9.54 35044 8.18 20338 3.25 13955 4.42 30016 5.31 22810 0.981 1.005 0.948 0.866 0.935 0.989 1.016 1.023 1.041 1.03 0.991 0.971 (La/Sm)N (Ce/Sm)N 2.685 2.654 3.445 3.055 11.698 6.566 16.66 9.974 11.882 7.592 5.101 3.148 4.302 3.148 3.305 2.446 2.234 1.597 2.462 1.941 3.682 3.265 2.932 2.876 Nb Th 2050 256 6290 260 4430 576 33.6 1500 445 1200 55.6 448 360 708 43.8 488 43 368 65.7 292 138 648 1110 575 Zn 4610 9460 10300 6720 6670 3910 5140 4410 3580 5460 8200 8740 Mn P2O5% 23100 20800 7.93 6.12 12700 7.74 25200 5.37 13500 11.60 11200 17.90 25100 17.20 13600 18.70 9000 21.00 13500 19.60 16800 16.80 18000 12.10 Fe2O3% 22.00 29.30 13.60 24.30 16.00 17.20 22.40 15.10 13.90 19.90 27.60 30.40 (11-12) (12-13) (13-14) GEOLOGIAN TUTKIMUSKESKUS 6 2.02.2016 3.1.1 Whole rock geochemistry Representative chemical analyses for trace and rare earth elements of weathered carbonatite samples from drill hole R30 are given in Table (2). The studied carbonatites samples are characterized by high abundances of REE and other elements such as, LREE 2.34 % (max 5.5 %), HREE 0.15 % (max 0.3 %), P2O5 10.8 % (max 21.0 %), Nb 0.3 % (max 1.7% XRF), Fe2O3 21.0 % (max 30.4 % XRF), Zn 0.5 % (max 1.0%) and Mn 1.9 % (Appendix 2). Carbonatite samples show similar REE distribution (Fig. 3), characterized by light-REE enriched and HREE-depleted patterns. The lack of a strong negative Eu anomaly suggests that silicate minerals may have not played an important role for REE enrichment in Sokli carbonatites rocks, although apatite fractionation may also have tended to offset the development of a negative Eu anomaly. Figure 3. Chondrite-normalised REE patterns of the studied samples of drillhole R30. 3.1.2 Mineralogical analysis by XRD The bulk mineralogy analysis of the studied samples from the Kaulus area, identified by using XRD are composed of montmorillonite, aegirine, tainiolite, K-feldspar, goethite, quartz , albite and REE minerals (mainly monazite). XRD data show the presence of montmorillonite as major clay mineral in most of the GEOLOGIAN TUTKIMUSKESKUS 7 2.02.2016 studied samples, as indicated by the presence of a 14-Å reflection that expands to 16-Å upon glycolation and collapses to 10 Å upon heating. Some separated samples (not chemically analyzed and not shown in Table 1) had moderate to minor abundances of other clays (besides chlorite or smectite) identified as poorly crystalline smectite or mixed layer clays of d-spacing of 14 Å to 18 Å in the oven-dried (30°C) particles, glycolated, and heated (350°C and 550°C) particles. The separation process was repeated until a pure clay-mineral separate was achieved. Other associated minerals are carbonate minerals as calcite, dolomite, strontianite and apatite, and tainiolite, goethite and aegirine in some samples. Following the mineral phases were identified by XRD (Tiljander 2014: EMA-2014-81-X): 1. U5422014R30 / 4.40 (X14-191): The sample is composed mainly of montmorillonite, goethite, aegirine and monazite. The X-ray diffractograms of Mg-saturated randomly oriented clay samples given in (Fig. 4), show an abundance of montmorillonite, after EG-treatment the peak of 13.5 Å moved to 16.7 Å. Figure 4. XRD pattern of sample U5422014R30/ 4.40 GEOLOGIAN TUTKIMUSKESKUS 8 2.02.2016 2. U5422014R30 / 7.40 (X14-192-1): The sample is composed mainly of montmorillonite, aegirine, mica (tainiolite and/or phlogopite), Kfeldspar, goethite, and possibly strontianite and quartz. Sample separation was made from the lighter part (X14-192) and the darker part (X14-192-1) of the material. No difference found between the diffractograms of XRD patterns. EG was added to the darker sample (X14-192-1-1) and the peak moved from 13.3 Å to 16.7 Å (Fig. 5). Figure 5. XRD pattern of selected sample U5422014R30/ 7.40 GEOLOGIAN TUTKIMUSKESKUS 9 2.02.2016 3. U5422014R30 / 8.90 darker material (X14-193): The sample is composed mainly of K-feldspar, goethite and REE-phosphates monazite and bastnäsite (Fig. 6). Figure 6. XRD pattern of selected sample U5422014R30/ 8.90 GEOLOGIAN TUTKIMUSKESKUS 10 2.02.2016 4. U5422014R30 / 14.40 (X14-194): The sample is composed mainly of quartz, plagioclase, K-feldspar, calcite and possible Ca-Mgphosphate. Phosphates and carbonates were difficult to identify, because the high amount of other mineral phases (Fig. 7). To get more accurate identification it is recommend studying the samples with SEM or EPMA. Figure 7. XRD pattern of selected sample U5422014R30/ 14.40 3.1.3 SEM Analysis and Interpretation In addition, selected samples were studied with scanning electron microscopy (SEM) and combined with bulk and clay XRD analyses. Thin section of each sample is examined by SEM to highlight the occurrence, distribution, textural features of REE-minerals. Energy dispersive X-ray (EDX) analysis is also carried out to get the elemental composition of the samples. The SEM-BSE observations and ED’s microanalysis revealed the occurrence of euhedral to subhedral micro-size crystals of resistant heavy minerals disseminated in the clay and weathered materials. Monazite is the principal REE-phosphate present in the investigated rocks (Fig. 8a-d). Selected analyses indicate Ce2O3 as the most abundant RE element, with the concentration going up to 37% in most samples; that particular sample shows higher BaO values (3.8%). Despite the non-uniform composition of monazite, no systematic variation is indicated for the studied samples. In contrast, smectite forms the matrix of GEOLOGIAN TUTKIMUSKESKUS 11 2.02.2016 these rocks, exhibiting radial textures (Fig.8b); it may also occur in association with calcite, goethite, chlorite and barite. Figure 8. Back-scattered electron images of monazite grains and barite within clay materials from Sokli/Kaulus area. GEOLOGIAN TUTKIMUSKESKUS 12 2.02.2016 3.2 Drill core U5422014R38 The drill core R38 from Kaulus penetrates fenites, silico-carbonatite and porphyric lamprophyre dikes. The mineralogy of the selected samples was examined by using SEM and light microscopy. 3.2.1 Petrography The studied area is mainly composed of fenites and silico-carbonatite, In the surface part they are often strongly weathered. Basically these rocks consist of silicate, apatite and carbonate minerals. Carbonatites, often brecciated, fine to coarse-grained, brown-yellowish in colour, consist mainly of calcite, dolomite and apatite. Goethite and brown biotite grains in fenite occur abundantly as poikiloblastic plates intergrown with pyroxene, olivine companied by albite and potassium minerals (K-feldspar). The amphibole also occurs as acicular to fibrous, anhedral to euhedral crystals which are colourless to pale green in colour. The amphibole is likely the sodium bearing tremolite and associated with goethite. Aegirine-augite is a common sodic pyroxene mineral in fenitic rocks. They are typically found in association with other sodic- alkali amphiboles hornblende, glaucophane and richterite. Aegirine occurs as dark green slender prismatic crystals and distinctly pleochroic – emerald green to yellowish green. A common, widespread, rock-forming mineral, mica is a significant mineral in the studied rocks. Mica occurs as irregular, tabular to ragged grains and is characterized by a noticeable pale yellow brown (phlogopitic) core and dark redbrown (biotitic) rim. Locally, phlogopite flakes are associated with greenish brown chlorite as rich in iron content. 3.2.2 REE Minerals Several minerals containing REE, Sr and/or Ba as major elements have been identified in the studied Sokli/Kaulus samples. The SEM-EDS technique was used to identify the main and REE minerals in studied sample. The main constituents of the studied lamprophyre dikes are calcite, strontium calcite, dolomite apatite and REE minerals. The principal and most widespread REE minerals at Kaulus carbonate phosphates (monazite), Ca ± Ba fluocarbonates (bastnäsite), hydrous carbonates (ancylite), and silicates (allanite and britholite). Monazite-(Ce) occurs most commonly in the form of microcrystalline, sporadic, isolated equidimensional crystals and associated mainly with calcite, dolomite and chlorite (Fig. 9a-d) . The crystal habit of bastnäsite in the studied carbonatites samples appears to be acicular or needle-shaped forming either in radial accumulations or intricate cross-cutting grids within a variety of minerals such as chlorite and calcite (Fig. 9e,f). Monazite and bastnäsite occur as irregular grains and nodules frequently intergroup with REE–Sr–Ba-bearing minerals or it’s found as filling the fractures within rocks. All REE minerals in the Sokli/Kaulus carbonatites are strongly enriched in light REE. Ce is the principal light REE, however, a La-rich mineral (ancylite-(La)) is also known from the Sokli carbonatites (Thair Al Ani et al., 2011). The composition of monazite-Ce from studied samples contains between 28.5 and 31.4 wt% Ce, 15.5 and 18.1 wt% La, 5 and 9 wt% Nd. Bastnäsite-Ce is relatively high with Ca 6.5-8.0 wt % and Sr present only as traces in few sample 2.3 wt %, with high content of Ce more 40 wt%, La 33 wt%, Nd 9.2 wt% and F 13 wt%. GEOLOGIAN TUTKIMUSKESKUS 13 2.02.2016 Figure 9. BSI of REE with associated minerals, (a, b) monazite overgrowth within calcite and associated with large assemblage of aegirine, (c) monazite in dolomite, (d) acicular crystals growth of monazite within calcite, (e) euhedral bastnäsite grains filling the vugs and fractures within calcite, (e) acicular crystals growth of monazite within chlorite in lamprophyre dikes. GEOLOGIAN TUTKIMUSKESKUS 14 2.02.2016 3.3 Bedrock samples PAT2 and JVPY-2013 3.3.1 Mineral Liberation Analyzer (MLA) results This group consisted of four samples were collected from the old excavations made by Rautaruukki Oy. The samples were processed at GTK Mintec/Outokumpu . Each sample was separated by mechanical sieves into three grain-size fractions, including material greater than 90 µm, 90-32 µm and 32 µm (Table. 3). Heavy minerals (minerals with density > 2.75 g/cm3) were separated from each fraction with heavy liquids and prepared into polished sections for mineral and texture characterization. Table 3. Sieving analysis results of the Sokli/Kaulus excavation samples. Sample_ID PAT2-2013-3.1 PAT2-2013-7.1 PAT2-2013-8.1 JVPY-2013-14.2 Grain size <0,5 mm <0,5 mm <0,5 mm <0,5 mm Fine fraction( µm ) weight (g) Conc. (%) weight (g) Conc. (%) weight (g) Conc. (%) weight (g) Conc. (%) 30.7 54.7 54.7 47.6 53.9 45.4 30.3 34.8 9.9 17.6 20.6 17.9 21.0 17.7 14.4 16.5 <32 15.5 27.6 39.7 34.5 43.7 36.8 42.4 48.7 Total 56.1 100.0 115.0 100.0 118.6 100.0 87.1 100.0 >90 90-32 Detailed mineralogical investigations were carried out by MLA analysis on selected samples, the data document enrichment factors (wt.% concentration in bulk sample, as given in Tables 3, 4). The data of heavy mineral fractions of the test materials are representing two different grain-size classes (+90 and 3290 µm). The results for each grain size are combined from six individual subsamples, and their mineralogy was determined by an automated SEM-EDS technique (see section Analytical methods). The indicator mineral species of the heavy density fractions are highlighted in Tables 3 and 4 as grey color. The composition of indicator heavy mineral varies greatly in the concentrates, from 0.1% to over 22% by studied samples in the Kaulus area. The dominant heavy mineral is bastnäsite, making up 17% and 16% of analysed grains, in studied sample PAT2-2013-3,1 in both fractions (>90 and 32-90 µm). The next most common REE-mineral is monazite, with maximum concentrations of 12.9% of heavies and 0.11.2% of all scanned minerals in sample PAT2-2013-3,1 (Fig. 10 a). Other REE minerals, such as allanite, birtholite, cerphosphorhuttonite, ancylite, thorite, pyrochlore and Ba minerals, are dominated but in lower percentages. The analysis data of the studied sample JVPY-2013-14,2 (Fig. 10b), showing the dominant heavy mineral is tainiolite (Li), making up to 8% in coarse fraction (>90 µm) and 6% in fine fraction (32-90 µm) of the studied sample. The common mineral is ferroselite (Se), with maximum concentration 3.8% in fine fraction (32-90 µm). The most common REE-mineral is monazite, with maximum concentrations of 3.5 % in GEOLOGIAN TUTKIMUSKESKUS 15 2.02.2016 fraction (>90 µm) and 3% in fine fraction (32-90 µm). Other REE minerals, such as rutile (Nb), allanite, britholite, bastnäsite cerphosphorhuttonite, thorite, microlite (Ta), pyrochlore and Ba mineral, are founded, but they have very low percentages. The graphs (Figure 11a) illustrates the compositional variation of the concentrates numbers of grains analysed. In the diagram, the abundances of selected REE-minerals are bastnäsite (23 930 grains) and monazite (21 113 grains) in fine fraction (32-90 µm) of selected sample PAT2-2013-3,1 (Fig. 8a). The fractions are also dominated by such as ferrosillite (Se), barite (Ba), allanite (La), cerphosphorhuttonite (Ce, Th), apatite and birtholite (Ce). The fine fraction of the selected sample PAT2-2013-3,1 shows more concentrated in heavy minerals than other selected samples. They also contain less than 500 of each mineral grains, such as rutile, psilomelane (Ba), tainolite (Li), ancylite (La), thorite (Th), schorl (B) and pyrochlore (Nb). The graph of the studied sample JVPY-2013-14,2 (Fig. 11b) shows, the dominant heavy mineral is tainiolite (Li), making up to 4 400 grains in coarse fraction (>90 µm) and up to 10 540 grains in fine fraction (32-90 µm). The common minerals are ferroselite(Se) with maximum 5 112 grains, monazite with maximum 3 384 grains, allanite with maximum 1 478 grains , rutile (Nb) with maximum 807 grains and psilomelane (Ba) with maximum 527 grains. Other minerals, such as britholite, zektzerite (Li, Zr), cerphosphorhuttonite (Ce, Th), bastnäsite, microlite (Ta), pyrochlore (Nb) and thorite, are extremely rare. GEOLOGIAN TUTKIMUSKESKUS 16 2.02.2016 Table 4. Modal mineralogy of studied samples PAT2-2013 determined by MLA on Polished sections (indicator heavy mineral labeled as grey color). Measured at GTK Mintec by Tuula Saastaoinen. Mineral Bastnäsite Goethite Monazite K-feldspar Fe-oxides Albite Hornblende Goethite(Mn)+Zn Biotite Ferrosilite (Se) Barite (Ba) Allanite (La) Aegirine Quartz Cerphosphorhuttonite (CeTh) Chlorite Stilpnomelane Aluminoceladonite Britholite (Ce) Fayalite-deform Richterite Psilomelane Riebeckite Augite Rutile+Nb Arfvedsonite Psilomelane (Ba) Tainiolite (Li) Muscovite Aegirine-augite Ilmenite Ancylite(La) Almandine Thorite (Th) Pyrolusite Actinolite Epidote Tremolite Rutile Serpentine Schorl (B) Hyalophane Pyrochlore (Nb) Pyrite Cummingtonite Apatite Total PAT2-2013-3,1 +90 µm PAT2-2013-3,1 32-90 µm PAT2-2013-7,1 +90 µm Wt% Grain Count Wt% Grain Count Wt % 17.23 7 044 16.3 23 931 14.9 7 167 22.3 41 086 11.20 4 821 12.9 9.07 6 487 7.53 6.43 2 285 8.80 PAT2-2013-8,1 +90 µm Grain Count Wt% Grain Count 0.45 193 1.43 549 14.5 7 366 7.46 3 711 21 113 6.13 2 697 9.07 3 653 20 584 3.89 2 931 1.63 1 206 4.05 5 508 6.49 2 432 7.15 2 623 6 111 6.45 17 090 2.18 1 594 0.57 406 4.46 2 828 3.0 7 292 0.74 495 0.26 168 4.13 1 978 6.97 12 833 47.1 23 930 60.1 29 879 3.01 1 780 1.55 3 503 4.68 2 918 1.43 875 2.98 1 473 3.21 6 068 0.24 123 0.60 306 2.55 1 042 2.18 3 411 - - - - 2.78 1 724.00 1.00 2 524 0.07 47.00 0.01 18 2.20 1 143 1.33 2 644 0.07 40 0.02 12 2.19 1 525 1.56 4 160 1.80 1 324 0.69 495 1.76 639 2.57 3 564 0.48 184 0.06 21 1.47 914 0.71 1 688 0.37 245 0.47 304 1.39 911 1.22 3 050 0.15 101 1.63 1 101 1.00 634 0.51 1 228 0.07 47 0.01 7 0.84 363 1.13 1 853 0.13 61 0.02 8 0.78 324 0.87 1 385 0.12 52 0.43 186 0.33 194 0.23 524 0.03 17 0.05 29 0.27 110 0.34 525 6.71 2 850 0.75 313 0.21 114 0.26 539 0.05 31 0.03 19 0.18 98 0.07 144 0.00 1 - - 0.18 77 0.25 407 0.02 7 0.00 2 0.18 94 0.13 268 0.02 10 0.00 1 0.16 64 0.20 313 2.51 1 064 0.08 32 0.16 102 0.10 238 0.12 80 0.04 24 0.16 101 0.12 285 0.04 29 - - 0.13 67 0.06 129 0.00 2 - - 0.12 48 0.14 205 0.02 10 - - 0.05 26 0.08 154 - - - - 0.05 20 0.02 41 0.02 8 - - 0.03 10 0.09 112 - - 0.00 1 0.03 10 0.01 10 - - - - 0.02 15 0.04 90 0.02 10 0.00 1 0.02 11 0.10 196 0.00 2 0.01 4 0.02 11 0.04 82 0.04 25 0.00 3 0.02 10 0.03 46 0.01 6 0.00 1 0.01 7 0.01 16 - - - - 0.01 5 0.01 18 0.00 1 - - 0.01 5 0.01 16 - - - - 0.01 5 0.04 63 0.15 72 0.73 320 0.01 2 0.00 2 - - - - 0.00 2 0.02 42 0.01 3 0.00 1 0.00 100 2 51 569 2.02 100 52 189 846 0.07 100 28 51 424 7.56 100 2 171 605 GEOLOGIAN TUTKIMUSKESKUS 17 2.02.2016 (a) (b) Figure 10. Mineral composition of indicator heavy mineral concentrates produced from the Sokli/Kaulus samples (a, b). Density >2.75 g·cm-3, grain size <90 µm and 32-90 µm, PM = polished epoxy mount, GM = grain preparate, Data : Mineral Liberation Analyser (MLA), GTK Mintec/Outokumpu. GEOLOGIAN TUTKIMUSKESKUS 18 2.02.2016 Table 5. Modal mineralogy of studied samples JVPY-2013-14,2 determined by MLA on polished sections (indicator heavy mineral labelled as grey colour) Mineral JVPY-2013-14,2 +90 µm JVPY-2013-14,2 32-90 µm Wt% Grain count Wt% 35.55 13788 48.29 63492 16.6 9 731 13.2 26 040 Tainiolite (Li) 8.35 4 403 6.0 10 547 Quartz 7.58 4 322 2.91 5 586 Goethite K-feldspar Albite Grain count 7.9 4478 4.41 8394 Stilpnomelane 2.93 1 565 2.92 5 248 Ferroselite(Se) 3.3 1 329 3.8 5 112 Monazite (Ce) 3.5 1 195 3.0 3 384 Goethite (Mn) 2.07 814 2.23 2 951 Goethite (Mn)+Zn 1.89 743 3.10 4 114 Fayalite 1.98 675 2.24 2 576 Riebeckite 1.25 552 1.39 2 065 Rutile+Nb 1.0 346 0.7 807 0.75 319 0.70 1 008 Allanite (La) 0.7 261 1.10 1 478 Hornblende 0.58 299 0.70 1 212 Psilomelane (Ba) 0.62 204 0.47 527 Biotite Ilmenite 0.40 192 0.45 735 0.54 172 0.45 483 Aluminoceladonite 0.20 102 0.16 278 Chlorite Britholite (Ce) 0.24 0.24 116 86 0.34 0.12 538 141 Muscovite 0.15 78 0.13 237 Richterite 0.12 57 0.17 272 Apatite 0.07 33 0.07 112 Actinolite 0.06 30 0.06 102 Zektzerite (Li, Zr) 0.05 25 0.04 68 Arfvedsonite 0.06 24 0.04 58 Epidote 0.05 22 0.15 226 Cerphosphorhuttonite (Ce, Th) 0.06 19 0.09 87 Augite 0.04 18 0.01 10 Staurolite 0.04 17 0.02 28 Bastnäsite (Ce) 0.06 17 0.05 51 Mascovite 0.03 15 0.02 42 Aegirine-augite 0.03 13 0.01 8 Baddeleyite 0.04 11 0.06 55 Almandine 0.03 9 0.03 32 Microlite (Ta) 0.03 8 0.06 54 Tremolite 0.01 4 0.03 49 Serpentine 0.00 2 0.00 5 Pyrochlore(Nb) 0.01 2 0.02 25 Nepheline 0.00 1 0.00 2 Zircon 0.00 1 0.02 22 Aegirine . GEOLOGIAN TUTKIMUSKESKUS 19 2.02.2016 (a) (b) Figure 11. The main mineral phases of the heavy mineral concentrates (>1%), grain size <90 and 90-32µm fractions from the Sokli/Kaulus samples (a, b). GEOLOGIAN TUTKIMUSKESKUS 20 2.02.2016 3.3.2 Detailed mineralogy by SEM-EDS Detailed mineralogical investigations were carried out by FE-SEM-EDS on selected samples that have been analysed by MLA for trace elements. Accessory and REE minerals are challenging and require a lot of manual SEM-EDS (scanning electron microscope + energy dispersive spectrometer) work to analyze the selected individual grains for chemical composition. The searching for and the analysis of the indicator minerals can be also automated by using a modern SEM and suitable software. The analyses are done from the polished sections of the heavy mineral concentrates. The EDS chemical analysis and SEM images of the various heavy mineral particles separated from >90 to 32 µm fractions show in Figures (1218). The majority of the heavy mineral separates are dominated by bastnäsite, goethite, monazite, Kfeldspar, Fe-oxides, albite, hornblende and tainiolite. Heavy mineral of studied samples from Kaulus/Sokli area contain several type of REE-bearing. REEs are mainly in bastnasite and monazite, but at least three other REE-bearing minerals have interesting distributions in the studied samples as allanite, britholite, cerphosphorhuttonite, ancylite, thorite, pyrochlore xenotime and apatite (Tables 4, 5). Bastnäsite is the main REE-bearing mineral identified in the sample PAT2-2013-3,1 both size fractions. For comparison, the high concentration of bastnäsite was observed in the fine fraction (32-90 µm) of sample PAT2-2013-3.1, containing 234931 bastnäsite grains, while only 7 044 grains counted in the coarse fraction>90 µm (Table 4). Many of bastnäsite grains from the heavy mineral particles separated from >90-32 µm fractions of the studied samples have been analysed by SEM, to investigate the size, morphology and chemical composition of the grains. Bastnäsite appears as isolated crystals or thintabular crystals, shows large variety of flaky/acicular/needle-like and aggregates of radiating individual crystal habits forms elongated crystals (100 x 300 μm), though it can also form rounded hexagonal or sub rounded crystals (Figures 12, 13). Bastnäsite is commonly associated with allanite and goethite, with which it may be intergrown. Also, inside of the bastnäsite-(Ce) there occur small bright grains of thorite, with ~ 60 wt% Th2O3 (Figures 12a-d). The majority of bästnasite grains in the studied samples are strongly enriched in the LREE with approximately 70 wt% REE in its structure, as Ce (36.5 wt%), La (32.5 wt%) and Nd (9.5 wt. %). The replacement of bastnäsite and allanite are noted in most of the studied bastnasite grains and causing increasing of REE content. The allanite-(Ce) is quite commonly attacked by F-rich fluids and transformed into REE fluorcarbonates minerals, most often into bastnasite-(Ce) see Figures (12c-d). Allanitization process of REE carbonates can form on bastnäsite-(Ce) and this transformation process is reversible and maybe causes decreasing of REE contents. Allanite-(Ce) is formed under conditions with higher SiO2 activity and higher concentrations of Al, Ca and Fe than that the conditions favourable for the crystallization of the other REE-silicates shown above. GEOLOGIAN TUTKIMUSKESKUS 21 2.02.2016 Figure 12. Back-scattered electron (BSE) images of REE mineral from sample PAT2-2013-3.1 (a-d) Bastnäsite crystals have a distinctly lamellar structure, acicular aggregate and irregular aggregates (e, f) Replacement of bastnäsite by acicular aggregate allanite. GEOLOGIAN TUTKIMUSKESKUS 22 2.02.2016 Figure 13. Back-scattered electron (BSE) images of REE mineral from sample PAT2-2013-3.1 (a-c) Spherical growths of acicular bastnäsite crystals (d) Replacement of bastnäsite by acicular aggregate allanite, (e) Spherical to subrounded aggregates of allanite associated with bastnäsite and iron oxides (f) subhedral monazite crystal associated with bastnäsite. GEOLOGIAN TUTKIMUSKESKUS 23 2.02.2016 Similarly the monazite crystals more abundance in the fine fraction (32-90 µm) of sample PAT2-2013-3,1 (more than 21 110 grains) than in the coarse fraction (>90 µm) of the same sample (4 820 grains). Monazite considered as the main REE-minerals in the sample PAT2-2013-8,1 (more than 3 650 grains) and in the sample PAT2-2013-7,1 (2 697 grains) (Table 4). The selected monazite grains for searching and analysis in studied samples tend to appear as rounded to subrounded, ranging from 50-300 µm in size (Figures 13, 14). The chemical composition of monazite-(Ce), determined with SEM-EDAX is: P2O5=33.2-38.0, CaO=3.9-8.2, Ce2O3=33.5-45.0, La2O3= 24 - 33.6, Nd2O3= 8.0-14.2 (%wt). Also, some monazite grains are observed with elevated Th content (5.6- 20.0 wt%), or with high content of Ba (5 wt%) as seen in many studied samples. In most studied samples the monazite crystals occur in various shapes and sizes, such as radial fibrous aggregates and then grading completely into a dendritic network (Figures. 12a-d). Monazite crystals occur as acicular, columnar and radial aggregates and commonly associated with iron-oxides, barite and chlorite (Figure 13e, f and Figure 14 a, b). In some studied samples the monazite occurs completely as spherical aggregates or as clustering crystals (Figure. 15a, b). In some cases, grains of monazite and bastnasite are characterized by presence of Th, REE-rich mineral, showing clear and bright grains called as britholite. Britholite primarily grew directly on the surface of the monazite or bastnäsite grains. This embayed contact between britholite and monazite-bastnäsite may be the product of a reaction between F-, P-, REE-enriched fluid and the silicate minerals (Halden & Fryer 1999). The monazite shows a relatively high Th and Ca content: 14.6-18.9 % ThO2 and 1.4-3.4 % CaO. Although this indicates the dominant britholite substitution with monazite, britholite occurs as irregular forms and visible as small bright inclusions in the monazite and bastnäsite (Figures 15 a-e). The chemical composition of britholite, determined with SEM-EDAX is: 1.4-3.4 % CaO, 11.0-18.54 % La2O3, 26.432.5% Ce2O3, 20.5-38.0 % ThO2, 14.6-18.9 % SiO2, 4.5-6.2 % P2O5, 2.4-9.3 % Nd2O3, 0.50 % F. Several other REE minerals have interesting distributions in some studied samples includes cerphosphorhuttonite (Ce, Th), Pyrochlore(Nb), ancylite(La), and thorite. Pyrochlore (commonly comprising a U–Ta-rich and Nb-bearing rutile) typically occurring as scarce minute crystals, composed predominantly of sector-zoned prismatic crystals measuring of 50-100 µm (Figure 16e, f). Other distinctive heavy minerals were counted by MLA in minor amounts or only in a few samples such as Ferroselite(Se), zektzerite (Li, Zr), aegirine, augite riebeckite, perovskite, aluminosilicates, microlite (Ta), psilomelane (Ba), schorl (B) and rutile (Ti, Nb). Aluminosilicates (used here in to refer to kyanite, sillimanite, and andalusite) were abundant in some studied samples. These minerals occurred at 1-2% of the individual heavy mineral fractions (90-32 μm) see Tables (4, 5). Goethite, albite, chlorite and aegirine-augite are generally present (and locally abundant) in the studied samples. Distribution and Morphology of the minerals are shown in Figure (17a-f). The most abundant heavy mineral in the studied sample JVPY-2013-14,2 is tainiolite, which was occurs in abundance in coarse fraction (>90 µm) as 8.35 wt% with 4 403 grains and in fine fraction (32-90 µm) as 6.0 wt% with 10 547grains see Tables (5). While in studied samples PAT2-2013, tainiolite was observed in minor amounts with many hundred grains and less than 1 wt% of the individual heavy mineral GEOLOGIAN TUTKIMUSKESKUS 24 2.02.2016 fractions. Over 500 tainiolite grains from the heavy mineral particles separated from >90-32 µm fractions of the studied samples have been analysed by SEM, to investigate the size, morphology and chemical of the tainiolite grains. Tainiolite appears as aggregates of acicular or flaky crystals closely spaced to form elongated crystals (50 x 200 μm), in most studied samples (Figure 18a-f). The chemical composition of Li-bearing phase (Tainiolite), determined with SEM-EDAX is: 5-9.8% K2O, 4-16wt% MgO, 54-59% SiO2, 1-2.2% Al2O3, 2-5.4wt% BaO, 2-6% F (Li2O not detected by SEM, but around 4wt%). A similar mineral is referred to as tainiolite in literature and was described for the first time in 1938 in the alkaline district of Magnet Cove, USA, by Miser and Stevens (Foster 1960, Erd et al. 1983). GEOLOGIAN TUTKIMUSKESKUS 25 2.02.2016 Figure 14. Back-scattered electron (BSE) images of REE mineral from sample JVPY-2013-14.2 (a-d) Irregular forms of monazite grains, intergrowth with thorite and associated with chlorite, (e) Monazite surrounded by prismatic iron oxide mineral, (f) Needles of monazite growth within chlorite. GEOLOGIAN TUTKIMUSKESKUS 26 2.02.2016 Figure 15. Back-scattered electron (BSE) images of REE mineral from sample JVPY-2013-14.2 (a-e) Spherical to ellipsoidal forms of monazite grains, intergrowth with small white bright thorite grains (britholite) inside monazite GEOLOGIAN TUTKIMUSKESKUS 27 2.02.2016 Figure 16. Back-scattered electron (BSE) images of REE mineral from samples PAT2-2013-8.1 and PAT2-20137.1 (a, b) Multiple bastnäsite-(Ce)grains grow marginally and on the cracks filling within barite and monazite, (c, d) Spherical aggregates of monazite, (e, f) Prismatic and zoning crystals of pyrochlore. GEOLOGIAN TUTKIMUSKESKUS 28 2.02.2016 Figure 17. Back-scattered electron (BSE) images of selected accessory mineral from sample JVPY-2013-14.2, (a) Zoning and banded goethite, (b) Chlorite plate contains white grains of monazite ( c) Needle-like crystals, prismatic crystal of aegirine, (d) Rutile showing two episodes of oscillatory zoning(e) Prismatic crystal of aegirine, (f) bladed albite crystal. GEOLOGIAN TUTKIMUSKESKUS 29 2.02.2016 Figure 18. Back-scattered electron (BSE) images of tainiolite mineral from sample JVPY-2013-14.2, (a-d) Tainiolite appears as aggregates of acicular or flaky crystals closely spaced to form elongated crystals(50 x 200 μm), (e, f) Acicular crystals aggregates of tainiolite rich in barite. GEOLOGIAN TUTKIMUSKESKUS 30 2.02.2016 4 CONCLUSIONS Fourteen samples from the southern part of Sokli/Kaulus area were submitted for mineralogical XRD and MLA analysis and also analyzed by SEM. The samples consist bedrock samples from old trenches and drill cores from R30 and R38. The samples are representing REE-rich carbonatite dikes and lamprophyre dikes taken from thorium-anomalies in the Fenite Zone of Sokli. The mineralogical and petrographical of studied carbonatic rocks and fenites show that, most of feldspars in the primary material are replaced by albite and amphiboles are replaced by sodic varieties such as riebeckite and arfvedsonite, quartz is progressively removed. Other marks of fenite include growth of apatite, carbonate minerals and goethite. Process of this type of metasomatism is often called ‘fenitization’. In addition to common heavy minerals, the feature analyzer shows monazite, bastnasite, allanite, ancylite and birholite are typical REE-bearing in the heavy mineral fractions of the studied carbonatite dikes. Many of them were found in even high concentrations such as bastnäsite (16.3%), monazite (12.9%), birtholite (1.3%), allanite (1%) and ancylite (<1%) of heavy minerals in the some selected samples. The main lithium-bearing minerals include tainiolite (Li) was found in high concentrations (8.3%) in the sample JVPY-2013-14, 2. The REE prospect contains total concentrations of Ce, La and Nd, ranging from 40 to 60 wt%, which are present in monazite bastnäsite and allanite minerals that formed during the late stages of carbonatite emplacement. Carbonatites - ranging in composition from calcio-, magnesio- to ferro-types - and mica-rich rocks. 5 REFERENCES Al-Ani Thair & Sarapää Olli 2013. Mineralogical and geochemical study on carbonatites and fenites from the Kaulus drill cores, southern side of the Sokli Complex, NE Finland, Geologian tutkimuskeskus, arkistoraportti, 145/2013. Al-Ani, T. & Sarapää, O. 2014. REE‐minerals in carbonatite, alkaline and hydrothermal rocks, northern and central Finland. ERES2014: 1st European Rare Earth Resources Conference|Milos|04‐07/09/2014, 333-342. Erd RC, Czamanske GK & Meyer CE. 1983. Taeniolite an uncommon lithium-mica from Coyote Peak County, California. The Mineralogical Record 14: 39-40. Foster, M.D. 1960. Interpretation of the composition of lithium micas. U.S. Geol Surv, Prof. Paper 354 E, 115-147. Kramm, U., Kogarko, L.N., Kononova, V.A., Vartiainen, H. 1993. The Kola Alkaline Province of the CIS and Finland: Precise Rb–Sr ages define 380–360 Ma age range for all magmatism. Lithos 30, 33-44. Korsakova, M., Krasotkin, S., Stromov, V., Iljina, M., Lauri, L., Nilsson, P., 2012. Metallogenic areas in Russian part of the Fennoscandian shield, in: Eilu, P. (Ed.), Mineral deposits and metallogeny of Fennoscandia. Geological Survey of Finland, Special Paper 53, 343–395. Sarapää O., Al Ani T., Lahti S.I., Lauri, L. S., Sarala P., Torppa, A. 2013. Rare earth element potential in Finland. Journal of Geochemical Exploration, Volume 133, 25-41. GEOLOGIAN TUTKIMUSKESKUS 31 2.02.2016 Tiljander, M. 2014. Indentification of mineral phases from 4samples using XRD. Research report, Southern Finland office/ Research laboratory. EMA-2014-81-X. 2 p. Vartiainen, H., 1980. The petrography, mineralogy and petrochemistry of the Sokli carbonatite massif, northern Finland. Geological Survey of Finland, Bulletin 313, 126 p. Vartiainen, H., 2001. Sokli carbonatite complex, northern Finland. Res Terrae. Ser. A 20, University of Oulu, 8-24. GEOLOGIAN TUTKIMUSKESKUS 32 2.02.2016 6 APPENDICES 1 GEOLOGIAN TUTKIMUSKESKUS 33 2.02.2016