GPO - MHz Marketing, Inc.

Transcription

Table of Contents
General Information
II
Who We Are
III Custom Designs
IV Reference Guide
GPO® Products
2
GPO Specifications
3
Flange Mounts
5
Thread-In Shrouds
9
Press-In Shrouds
11 Hermetic Shrouds
13 PCB Mounts
16 Right Angle PCB Mounts
17 Edge Mounts
19 Surface Mounts
21 Cable Connectors
34 Loads
35 Hermetic Seals
35 Blindmate Interconnects
38 Pins
GPPO® Products
40 GPPO Specifications
41 Flange Mounts
41 Thread-In Shrouds
44 Hermetic Shrouds
46 PCB Mounts
48 Edge Mounts
51 Surface Mounts
52 Cable Connectors
60 Loads
61 Hermetic Seals
64 Pins
G3PO™ Products
66 G3PO Specifications
67 PCB Mounts
67 Edge Mounts
68 Surface Mount
69 Cable Connectors
70 Loads
72 Pin
GMS® Products
74 GMS Specifications
75 Flange Mounts
79 Thread-In Shrouds
80 Edge Mount
81 Cable Connectors
91 Loads
92 ESD
SGMS™ Products
95 Flange Mounts
96 Thread-in Shrouds
97 Cable Connectors
98 Blindmate Interconnect
Multiposition Block Products
100 GPO Multiposition Blocks
101 GPPO Multiposition Blocks
107 G3PO Multiposition Blocks
109 SGMS Multiposition Blocks
Adapters
112 GPO Within Series Adapters
114 GPO Between Series Adapters
123 GPPO Within Series Adapters
123 GPPO Between Series Adapters
128 G3PO Adapters
128 GMS Adapters
134 GMS ESD Adapters
Tools
138 GPO Tools
143 GPPO Tools
146 G3PO Tools
147 GMS Tools
148 Miscellaneous Tools
Appendix
150 Cable Assemblies
151 Test Capabilities
152 Connector Evaluation Kits
153 Adapter Matrices
154 Assembly Procedures
159 Application Notes
170 Index
Who We Are
With 50 years of leading-edge design experience,
Corning Gilbert exceeds industry standards with high
performance coaxial connectors for broadband
telecommunication and microwave systems. Corning
Gilbert pioneered the GPO® GPPO® and G3PO™
connectors—setting the industry gold standard for
coaxial push-on interconnects. First developed for
demanding military applications, these systems are
increasingly seen as the high frequency interconnects
of choice for military, satellite, wireless and
telecommunications applications.
Our goal is to provide design engineers with high
performance interconnect solutions that can be easily
integrated into today's sophisticated applications.
Our dedicated facility for microwave products enables
us to provide exceptional customer and design services
with excellent delivery and unparalleled quality.
Our manufacturing facility is designed to provide both
design flexibility and cost effective components that are
controlled to extremely tight tolerances.
Corning Gilbert operates its manufacturing facilities
under the ISO 9001 quality system. Headquartered in
Glendale, AZ, its state-of-the art facilities adhere to
stringent production guidelines to provide our customers with the highest level of reliability, consistency
and quality, while meeting applicable military and
commercial standards.
Corning Gilbert is a wholly owned subsidiary of
Corning Incorporated. Established in 1851, Corning
creates leading edge technologies for the fastest
II
Corning Gilbert, Inc. Microwave Push-on Interconnects
growing markets of the world's economy. Corning
manufactures optical fiber, cable and photonic products
for the telecommunications industry, and high
performance display components for computers,
television, and their communications related industries.
Corning also uses advanced materials to manufacture
products for scientific, semiconductor and
environmental markets.
Customer Care
Our knowledgeable staff is available Monday - Friday
to provide prompt assistance with your order placement and shipment inquiries. Let our customer care
team answer your questions or suggest alternative, efficient ways of achieving your interconnect objectives.
phone:
800 651 8869 (U.S. and Canada)
(01) 623 845 5613 (International)
e-mail: [email protected]
Custom Designs
Custom designs are supported by a team of innovative
engineers, technicians, and machinists at Corning
Gilbert. Our highly skilled staff will help you define
your requirements and customize a design for the
application. We understand that the goal is to quickly
design and manufacture these specialized interconnects
for electrical, mechanical, and environmental evaluation.
Complete with high precision Swiss turning centers
and CNC mills, our dedicated machine shop is
equipped to produce the custom designs you need. We
also maintain a plating shop which enables same-day
passivation or plating of metallic components. Many
validation tests are performed in-house. Electrical tests
include voltage standing wave ratio (VSWR), dielectric
withstanding voltage (DWV) and insulation resistance.
Mechanical tests include durability and mating forces.
Environmental tests include thermal cycling, humidity,
and salt spray. Contact our customer care team for
more information.
How to Reach Us
Corning Gilbert offers various custom design solutions
including multiposition blocks, hermetic shrouds,
cable connectors, PCB mounts, blindmate interconnects (BMI), loads, and adapters. Special packaging is
also available, such as custom trays and tape & reel for
automated pick and placement. Other custom options
include selective plating and solder dipping.
A typical design cycle begins with a discussion between
the applications engineer and the customer to identify
the interconnect requirements. Our library of designs
are used as a basis for assessing your needs so that your
exact requirements may be met with the highest
efficiency. After receipt of order, our design engineer
will create 3D CAD models which are optimized for
electrical performance using electromagnetic simulation software. This allows tuning for a specific
frequency range or broadband performance. Complex
designs may require mechanical analysis using finite
element analysis (FEA) software.
Corning Gilbert Inc.
Corporate Headquarters
5310 West Camelback Rd.
Glendale, AZ 85301 U.S.A.
phone:
800 651 8869 (U.S. and Canada)
(01) 623 845 5613 (International)
fax:
(01) 623 934 5160
website: www.corning.com/corninggilbert
e-mail:
[email protected]
International Customer Service Center
at Corning Cabelcon
Industriparken 10
4760 Vordinborg
Denmark
phone:
+(45) 55 98 55 99
fax:
+(45) 55 98 55 04
website: www.cabelcon.dk
e-mail:
[email protected]
III
Reference Guide
Symbols
Detent
CC
Center Conductor
FD
Full Detent
LD
Limited Detent
mm
Millimeter
MP Microporous
PCB
Printed Circuit Board
R/A Right Angle
R/P
Reference Plane
S/R Semi-Rigid
SB
Smooth Bore
SQ
Square
Ø
Diameter
RF
Radio Frequency
GHz
Gigahertz
dB
Decibels
VSWR Voltage Standing
Wave Ratio
CM Catchers Mitt
Standard Tolerances
All dimensions are in inches, interpretation per
ANSI Y14.5.
.XX ± .010
.XXX ± .005
Fractions ± 1/64
Angular ± 5º
Typical machine surface finish 63 micro inches
A captivation system was developed for the GPO®,
GPPO®, and G3PO™ interconnect systems that provides predictable levels of retention without the use
of bulky coupling nuts. This feature is characterized
as the connector's detent.
The GPO product is designed with three available
detent levels, and two detents exist within the smaller
GPPO and G3PO series. This is accommodated by
the incorporation of a ring in the male pin connector
(commonly known as the shroud). This 'detent ring'
interacts with the mating connector (female contact)
to captivate the pair together.
Each of the detent levels, full detent, limited detent
(available only in the GPO series), and smooth bore
(or zero detent) provide different levels of force
required to mate and de-mate the connectors.
Engage*
Common Materials and Finishes
•
•
Beryllium copper per ASTM B 196 and/or
ASTM B 197. Gold plate per ASTM B 488 over
electrolytic nickel per SAE AMS QQ N 290.
CRES 303 per ASTM A 484 and ASTM A 582
or ASTM A 555 and ASTM A 581. Passivate per
SAE AMS 2700.
•
Brass per ASTM B 16. Gold plate per ASTM B
488 over electrolytic nickel per SAE AMS QQ N
290.
•
Virgin TEFLON® PTFE fluorocarbon per
ASTM D 1710.
•
KOVAR® Iron-nickel-cobalt sealing alloy per
ASTM F 15. Gold plate per ASTM B 488 over
electrolytic nickel per SAE AMS QQ N 290.
•
Corning® 7070 glass.
•
Ultem® 1000 (Polyetherimide) per ASTM D
5205.
•
Torlon® (Polyamide-Imide) per ASTM D 5204.
IV
GPO
Disengage*
Cycles*
GPO
GPPO G3PO
GPPO G3PO
GPO
GPPO G3PO
Full
Detent 7.0 lbs
4.5 lbs
2.5 lbs
9.0 lbs
6.5 lbs
4.5 lbs 100 min 100 min 100 min
Limited
Detent 5.0 lbs
N/A
N/A
7.0 lbs
N/A
N/A
Smooth
2.0 lbs
Bore
2.5 lbs
1.2 lbs
0.5 lbs
1.5 lbs
1.0 lbs 1000 min 500 min 500 min
500 min
N/A
N/A
* The figures listed for the engage/disengage forces are typical and
based upon actual data. Shrouds manufactured from ASTM-F15
sealing alloys will provide increased forces and reduced cycles.
Contact the Corning Customer Care Team for more details.
Proper care should be used when designing your system to select the required forces for engaging and disengaging. The level of detent selected will also have
an impact on the number of engage/disengage cycles.
Note, female cable connectors MUST be used with a
full detent male to maintain a fully mated condition
during shock and vibration.
GPO Specifications
General Characteristics
Impedance
Frequency range
Temperature range
50 ohms nominal
DC to 40 GHz
-55oC thru 165oC
Electrical Characteristics
VSWR
Insertion loss
DWV@ Sea Level:
Insulation resistance
Contact resistance
Outer conductor
Inner conductor
RF leakage
1.15:1 to 26.5 GHz typical; <1.5:1 typical to 40 GHz
.12 f GHz
500 Vrms
5,000 megohms min.
2 milliohms max.
6 milliohms max.
-80 dB to 3 GHz, -65 dB to 26.5 GHz
Mechanical Characteristics
Mate/Demate Cycles
Force to engage/disengage
FD - 100min.; LD - 500min.; SB - 1000min.;
FD - 9.0lbs.typ./7.0lbs.typ.; LD - 7.0lbs.typ./5.0lbs.typ.
SB - 2.0lbs.typ./.5lbs.typ.
Tolerated misalignment
Radial
Axial
+/-
0.010”
0.010” (flush to 0.010” from the reference plane)
Environmental Characteristics
Thermal Shock
Salt Spray
Vibration
Shock
Moisture resistance
MIL-STD-202, Method 107, Condition B
MIL-STD-202, Method 101
MIL-STD-202, Method 213, Condition I
MIL-STD-202, Method 106, except Step 7B
Materials (typical)
Bodies
Outer contacts
Center contacts
Insulators
Springs
Beryllium Copper per ASTM B196 and or/ASTM B197
PTFE Fluorocarbon per ASTM D1710 and ASTM D 1457
17-7 Stainless Steel per ASTM A313-95A
Finish (typical)
Gold plated per MIL-G-45204, Type I, Grade C, Class 1,
Over Nickel Plate per QQ-N-290
Bodies
Contacts
*Note: Corning Gilbert male connectors have a full self-centering mechanism
2
GPO Flange Mounts
Catalog Number
A001-A23-03
A001-A24-03
A001-A25-03
A001-A23-04
A001-A24-04
A001-A25-04
A001-A23-07
A001-A24-07
A001-A25-07
A
FD
LD
SB
FD
LD
SB
FD
LD
SB
Tools Recommended
A090-A99-11 (For-03 Series)
B
.328
.328
.328
.282
.282
.282
.481
.481
.481
Cø
.480
.480
.480
.400
.400
.400
.625
.625
.625
Dø
.098
.098
.098
.073
.073
.073
.103
.103
.103
Male Flange Mount
Shroud No Center Conductor
A090-A99-03
Assembly Procedure
AP01-009
Catalog Number
A001-N33-02
A001-N34-02
A001-N35-02
A
FD
LD
SB
VSWR (TYP)
1.2:1 to 18 GHz
1.35:1 to 26.5 GHz
Male Flange Mount
Shroud Accepts 0.012 Center Conductor
Tools Recommended
A090-A99-09
Catalog Number
A001-N33-05
A001-N34-05
A001-N35-05
A
FD
LD
SB
VSWR (TYP)
1.25:1 to 12 GHz
1.35:1 to 26.5 GHz
Tools Recommended
A090-A99-09
Male 2 Hold Flange Mount
3
GPO Flange Mounts
Catalog Number
0119-441-3
VSWR (TYP)
1.25:1 to 18 GHz
1.35:1 to 26.5 GHz
Male Full Detent 2 Hole Flange
Mount Straight Terminal
Catalog Number
0119-467-3
VSWR (TYP)
1.25:1 to 18 GHz
1.35:1 to 26.5 GHz
Male Full Detent Right Angle
Flange Mount
Catalog Number
0119-785-3
Tools Recommended
A090-A99-11
A090-A99-03
Male Flange Mount Full Detent Limited
Hub 1/2 Hole
4
A
FD
GPO Flange Mounts
Catalog Number
0119-857-3
Tools Recommended
A090-A99-10
A090-A99-03
Assembly Procedure
AP01-009
Male Flange Mount Full Detent
Limited Hub
GPO Thread-In Shrouds
Catalog Number
A003-A23-01
A003-A24-01
A003-A25-01
A
FD
LD
SB
Tools Recommended
A090-A99-01
Assembly Procedure
AP01-024
Male Thread-in Shroud No Center
Conductor
Catalog Number
A003-A27-01
Tools Recommended
A097-A99-03
Modified Catchers Mitt
Thread-in Shroud
5
Catalog Number
A003-L11-01
Female Thread-in
Waveguide Launch
Catalog Number
A003-L33-01
A003-L34-01
A003-L35-01
A
FD
LD
SB
VSWR (TYP)
1.25:1 to 18 GHz
1.35:1 to 26.5 GHz
Male Thread-in
Straight Terminal
Tools Recommended
A097-A99-01 for FD
A097-A99-02 for LD
A097-A99-03 for SB
Catalog Number
A003-L33-02
A003-L34-02
A003-L35-02
VSWR (TYP)
1.25:1 to 18 GHz
1.35:1 to 26.5 GHz
Tools Recommended
Male Thread-in
Shroud 0.018 Pin Contact
A097-A99-01 for FD
A097-A99-02 for LD
A097-A99-03 for SB
6
A
FD
LD
SB
Catalog Number
A003-N33-01
A003-N34-01
A003-N35-01
A
FD
LD
SB
VSWR (TYP)
1.25:1 to 18 GHz
1.35:1 to 26.5 GHz
Male Thread-in
Shroud 2.92 mm Sparkplug
Tools Recommended
A097-A99-01 for FD
A097-A99-02 for LD
A097-A99-03 for SB
A097-A99-07
Assembly Procedure
AP01-104
Catalog Number
A003-N33-02
A003-N34-02
A003-N35-02
A
FD
LD
SB
VSWR (TYP)
1.25:1 to 18 GHz
1.35:1 to 26.5 GHz
Male Thread-in
Shroud Accepts 0.012 Pin
Tools Recommended
A097-A99-01 for FD
A097-A99-02 for LD
A097-A99-03 for SB
A097-A99-07
Catalog Number
0119-228-1
VSWR (TYP)
.245
.101
.218
ACROSS
FLATS
.025
1.25:1 to 18 GHz
1.35:1 to 26.5 GHz
.248Ø
.131Ø
GPO Female
Thread-in
#12-56 UNS-2A
GPO FEMALE
INTERFACE
7
Catalog Number
0119-258-3-FD
0119-258-3-LD
0119-258-3-SB
A
FD
LD
SB
VSWR (TYP)
1.25:1 to 18 GHz
1.35:1 to 26.5 GHz
Male Thread-in
Non-hermetic Straight Terminal
Tools Recommended
A090-A99-01 for FD
A090-A99-02 for LD
A090-A99-03 for SB
Catalog Number
0119-265-3-FD
0119-265-3-LD
0119-265-3-SB
A
FD
LD
SB
Catalog Number
0119-266-3-FD
0119-266-3-LD
0119-266-3-SB
A
FD
LD
SB
Male Thread-in
Waveguide Launch
Male Thread-in
Waveguide Launch
8
Catalog Number
A
0119-424-3-1 .067-.073
0119-424-3-2 .097-.103
0119-424-3-3
.200
0119-424-3-4
.350
B
.040
.040
.110
.260
VSWR (TYP)
1.35:1 to 18 GHz
1.45:1 to 26.5 GHz
Male Catchers
Mitt to Straight Terminal
Tools Recommended
A090-A99-03
Assembly Procedure
AP01-057
Catalog Number
0119-579-3
VSWR (TYP)
1.25:1 to 18 GHz
1.35:1 to 26.5 GHz
Tools Recommended
A090-A99-01
Male to Male Full Detent
Thread-in
GPO Press-In Shrouds
Catalog Number
A005-A23-01
A005-A24-01
A005-A25-01
A005-A23-02
A005-A24-02
A005-A25-02
Tools Recommended
A090-A99-08
A
FD
LD
SB
FD
LD
SB
Bø
.174
.174
.174
.154
.154
.154
C
.120
.120
.120
.080
.080
.080
Dø
.170
.170
.170
.143
.143
.143
Male Press-in Shroud
No Center Conductor
9
GPO Press-In Shrouds
30°
2 PL.
.195
.189
.115
.105
.065
.055
KNURL
Catalog Number
A005-L34-01
.044
.038
.069
.061
VSWR (TYP)
.158Ø
.156Ø
1.25:1 to 18 GHz
.058Ø
.056Ø
1.35:1 to 26.5 GHz
.019Ø
.017Ø
GPO MALE
LIMITED DETENT
INTERFACE
Male Limited Detent
Press-in Straight Terminal
R/P
Tools Recommended
DIELECTRIC
.0835
.0795
A090-A99-08
50 TPI STRAIGHT KNURL
PER ASME B94.6
(.005 MIN. TOOTH DEPTH)
BLANK DIA. .156Ø - .158Ø
RAISED TO .167Ø - .169Ø
Assembly Procedure
AP01-070
Catalog Number
A005-L35-01
.195
.189
.115
.105
.065
.055
KNURL
.044
.038
VSWR (TYP)
.069
.061
1.25:1 to 18 GHz
1.35:1 to 26.5 GHz
.158Ø
.156Ø
.058Ø
.056Ø
Tools Recommended
.019Ø
.017Ø
GPO MALE
SMOOTH BORE
INTERFACE
R/P
A090-A99-08
DIELECTRIC
.0835
.0795
Assembly Procedure
Male Smooth Bore
Press-in Straight Terminal
50 TPI STRAIGHT KNURL
PER ASME B94.6
(.005 MIN. TOOTH DEPTH)
BLANK DIA. .156Ø - .158Ø
RAISED TO .167Ø - .169Ø
AP01-070
.180
.160
BODY CORNERS
2 PL.
U
.010 A C
.008 A
B
V
Ø.425 BODY
T
W .175
.155
2 PL.
.250
2 PL.
.2635
TIP TO TIP
Catalog Number
A006-N33-02
.010 A B
D
TIPS ONLY
.001 A
VSWR (TYP)
S
R.058
4 PL.
X
Z
Y
Ø.438
.003 MIN X 45°
.214
MAX
GPO MALE
FULL DETENT
INTERFACE
TIP TO TIP
.164
MAX
.192
MAX
R.065 MIN
2 PL.
C
.015 MIN X 45°
Ø.003 A B
.268
MAX
.012 x 45° 4 PL.
.008
.161
.062
.058
Male Full Detent
R/A Press-in Accepts 0.015 C/C
A
.006
.002
.015
.011
R/P
.150
.140
ACCEPTS .015Ø-.016Ø
x .050 MAX LONG PIN
WITH SPHERICAL
RADIUS TIP
Ø.003 A B C
10
1:3:1 to 18 GHz
GPO Hermetic Shrouds
Catalog Number
A
“L” Lengths
A007-L43-01-TAB-X FD .030/.050/.070/.090
A007-L44-01-TAB-X LD .030/.050/.070/.090
A007-L45-01-TAB-X SB .030/.050/.070/.090
TAB = “L” x 103 inches
X = Customer defined. Straight (S) or Radius (R) cut.
Male Hermetic Shroud
Full Shroud Full Body
VSWR (TYP)
1.25:1 to 18 GHz
1.35:1 to 26.5 GHz
Catalog Number
A
“L” Lengths
A007-L43-02-TAB-X FB .030/.050/.070/.090
A007-L44-02-TAB-X LD .030/.050/.070/.090
A007-L45-02-TAB-X SB .030/.050/.070/.090
Half Shroud Full Body
VSWR (TYP)
1.25:1 to 18 GHz
1.35:1 to 26.5 GHz
Catalog Number
A
“L” Lengths
A007-L43-03-TAB-X FD .030/.050/.070/.090
A007-L44-03-TAB-X LD .030/.050/.070/.090
A007-L45-03-TAB-X SB .030/.050/.070/.090
VSWR (TYP)
1.25:1 to 18 GHz
1.35:1 to 26.5 GHz
Full Shroud Short Body
11
Catalog Number
A
“L” Lengths
A007-L43-04-TAB-X FD .030/.050/.070/.090
A007-L44-04-TAB-X LD .030/.050/.070/.090
A007-L45-04-TAB-X SB .030/.050/.070/.090
VSWR (TYP)
1.25:1 to 18 GHz
Half Shroud Short Body
1.35:1 to 26.5 GHz
SQUARE CUT
.250
HEX.
.190
.049
.100
Catalog Number
A007-L43-14
VSWR (TYP)
.275Ø
ACROSS
CORNERS
.015Ø
1.25:1 to 18 GHz
1.35:1 to 26.5 GHz
KOVAR
7070 GLASS
GPO MALE
FULL DENTENT
INTERFACE
Male Full Detent
Thread-in Shroud Straight Terminal
.062
.060
R/P
#10-32 UNF-2A
.180
7070 GLASS
FULL RAD.
.190Ø
.112Ø
.118Ø
.012Ø
.016Ø
.014Ø
GPO MALE
"A" INTERFACE
Male Solder-in Hermetic Shroud
12
.020
.014
.011
.009
KOVAR
R/P
.071
.069
Catalog Number
0119-248-1-FD
0119-248-1-LD
0119-248-1-SB
0119-248-1-CM
VSWR (TYP)
1.25:1 to 18 GHz
1.35:1 to 26.5 GHz
A
FD
LD
SB
CM
Catalog Number
0119-248-1-FD-T
0119-248-1-LD-T
0119-248-1-SB-T
0119-248-1-CM-T
.180
A
FD
LD
SB
CM
SOLDER DIP USING
SN63 PB37
.059
.019
.012Ø
.190Ø
.112Ø
.108Ø
.016Ø
.014Ø
VSWR (TYP)
FULL RAD.
1.25:1 to 18 GHz
1.35:1 to 26.5 GHz
GPO MALE
"A" INTERFACE
7070 GLASS
.020
.014
.011
.009
KOVAR
R/P
.071
.069
Male Solder-in Hermetic Shroud With
Tin Solder Dipping
GPO PCB Mounts
.200 SQ.
Catalog Number
A008-L13-03
A008-L14-03
A008-L15-03
A
FD
LD
SB
.182
4 PL.
.100
5 PL.
.150 SQ.
.030Ø
4 LEGS
.015Ø
VSWR (TYP)
1.30:1 to 20 GHz
GPO MALE
"A" INTERFACE
.010
4 PL.
R/P
Catalog Number
A008-L33-01
A008-L34-01
A008-L35-01
A008-L33-02
A008-L34-02
A008-L35-02
A
FD
LD
SB
FD
LD
SB
.074
.070
4 PL.
.272Ø
ACROSS
CORNERS
.068Ø
4 PADS
Male Straight to PCB
B
.100
.100
.100
.140
.140
.140
VSWR (TYP)
1.30:1 to 20 GHz
Male PCB 4 Leg
Thru Mount Cap Center Conductor
13
GPO PCB Mounts
Catalog Number
A008-L33-05
A008-L34-05
A008-L35-05
A
FD
LD
SB
VSWR (TYP)
1.30:1 to 20 GHz
Male PCB 4 Leg
Thru Mount Sep C/C
.214
ACROSS
FLATS
.110
2 PL.
.195
.011
Catalog Number
A008-L33-06
.028Ø
2 PL.
.100
.283Ø
VSWR (TYP)
1.30:1 to 20 GHz
.027Ø
.100
.044Ø
2 PL.
Male Full Detent
PCB 3 Pin Thru Hole
GPO MALE
FULL DETENT
INTERFACE
R/P
.085
2 PL.
Catalog Number
A008-P33-01
A008-P34-01
A008-P35-01
VSWR (TYP)
1.30:1 to 20 GHz
Male PCB 4 Leg
Thru Mount R/A Center Conductor
14
A
FD
LD
SB
GPO PCB Mounts
.200 SQ.
(.337)
.182
4 PL.
.150 SQ.
.155
5 PL.
.030Ø
4 LEGS
Catalog Number
0119-411-1
.015Ø
VSWR (TYP)
1.30:1 to 20 GHz
GPO MALE
SMOOTH BORE
INTERFACE
.272Ø
.217Ø
ACROSS
CORNERS
.068Ø
4 PADS
Male Smooth Bore
Straight to PCB (> 50 ohm)
R/P
.120
3/16
HEX STOCK
.100
4 PL.
Catalog Number
0119-711-1
.025Ø
4 PL.
.100
SQ
VSWR (TYP)
GPO MALE
LIMITED DETENT
INTERFACE
1.30:1 to 20 GHz
.010
.100
R/P
.066Ø
.064Ø
.060
.016Ø
.014Ø
2 PL.
.029Ø
.027Ø
Catalog Number
1619-001-1-FD
1619-001-1-LD
1619-001-1-SB
VSWR (TYP)
A
FD
LD
SB
.006
.004
.100
2 PL.
.292
.182
Male Limited Detent
to PCB with Separate Pin
.050
2 PL.
.100
5 PL.
.028Ø
.024Ø
.165Ø
1.30:1 to 20 GHz
.042Ø 4 PL.
GPO MALE 6G
"A" INTERFACE
R/P
.084
.080
.025Ø 4 PL.
Male Straight to PCB
15
GPO Right Angle PCB Mounts
Catalog Number
A009-P33-01
A009-P34-01
A009-P35-01
A009-P33-03
A009-P34-03
A009-P35-03
A
FD
LD
SB
FD
LD
SB
VSWR (TYP)
Male R/A PCB 4 Leg
Thru Mount Cap C/C
1.35:1 to 20 GHz
.320
30°
Catalog Number
0119-397-3-100
.093
.086
.205Ø
.017Ø
.352
VSWR (TYP)
1.35:1 to 20 GHz
.190
.265
.100
.050
Male Smooth Bore
Catchers Mitt R/A to PCB
R/P
.115
.025Ø
.023Ø
.154
.146
.090
.200
R/P
.190
MAX
.098
.094
.190Ø
MAX.
Catalog Number
0119-588-1
.170Ø
.450
MAX.
GPO MALE
SMOOTH BORE
INTERFACE
.355
.347
VSWR (TYP)
.256
1.35:1 to 20 GHz
.045
.075
.053
.150Ø
Male Smooth Bore
Right Angle to PCB
16
.375Ø
.027Ø
.023Ø
CONTACT
B
.096
.096
.096
.140
.140
.140
GPO Right Angle PCB Mounts
.250
SQ.
Catalog Number
0119-714-3
.554
.429
VSWR (TYP)
1.35:1 to 20 GHz
.040
.375Ø
#0-80 UNF - 28 THRU
.120
.117
SQ.
.125
Male Catchers Mitt
Right Angle to PCB
.140Ø
.086Ø
Catalog Number
0119-720-1
.285
VSWR (TYP)
GPO MALE
SMOOTH BORE
INTERFACE
1.35:1 to 20 GHz
.265
(.136)
.161
.015Ø
.083
.025
.110
Male Smooth Bore
Right Angle to PCB with R/A Launch
R/P
GPO Edge Mounts
Catalog Number
A010-L13-02
A010-L14-02
A010-L15-02
A
FD
LD
SB
VSWR (TYP)
1.25:1 to 26.5 GHz
Male PCB Edge Mount
17
GPO Edge Mounts
Catalog Number
A010-L33-01
A010-L34-01
A010-L35-01
A
FD
LD
SB
VSWR (TYP)
1.25:1 to 26.5 GHz
Male PCB Edge Mount
Catalog Number
A010-L33-02
A010-L34-02
A010-L35-02
A
FD
LD
SB
VSWR (TYP)
1.25:1 to 26.5 GHz
Male PCB Edge Mount
Catalog Number
A010-L33-03
A010-L34-03
A010-L35-03
A010-L33-04
A010-L34-04
A010-L35-04
VSWR (TYP)
Male PCB Edge Mount
with Chassis Mount
18
1.25:1 to 26.5 GHz
A
FD
LD
SB
FD
LD
SB
B
.099
.099
.099
.069
.069
.069
GPO Surface Mounts
.120
Catalog Number
A012-A93-01
A012-A94-01
A012-A95-01
A
FD
LD
SB
GPO MALE
"A" INTERFACE
.020
.195Ø
.164Ø
.145Ø
.005 x 45° 2 PL.
.011
.009
.065
Male Solder-on Shroud
R/P
.160
GPO LIMITED DETENT
CATCHERS MITT
INTERFACE
Catalog Number
A012-A97-01
.055
.040
.005
.002
VSWR (TYP)
.230Ø
1.25:1 to 18 GHz
.220Ø
1.35:1 to 26.5 GHz
.155Ø
.176
Catalog Number
A012-A97-02
GPO LIMITED DETENT
CATCHERS MITT
INTERFACE
.052
.048
R/P
Male Limited Detent
Catchers Mitt Solder-on Shroud
.045
.040
.004
VSWR (TYP)
1.25:1 to 18 GHz
1.35:1 to 26.5 GHz
.229Ø
.229Ø
.220Ø
R.079
THRU
WALL
ONE
.175Ø
.155Ø
.059
.069
R/P
.051
.120
Catalog Number
A012-L76-03
VSWR (TYP)
.015
.040
.005
.002
GPO SMOOTH BORE
CATCHERS MITT
INTERFACE
1.25:1 to 18 GHz
1.35:1 to 26.5 GHz
.155Ø
.270Ø
Shroud Solder Mount Smooth Bore
Catchers Mitt with Contact and Dielectric
.111
.109
R/P
19
GPO Surface Mounts
Catalog Number
A012-L96-01
.161
GPO MALE
CATCHERS MITT
INTERFACE
.031
.027
VSWR (TYP)
1.25:1 to 18 GHz
.184Ø
.070Ø
.175Ø
Shroud Solder Mount Smooth Bore
Catchers Mitt with Contact
1.35:1 to 26.5 GHz
.121Ø
.050
SLOT
4 PL.
.042
.039
R/P
Catalog Number
A012-P93-01
A012-P94-01
A012-P95-01
A
FD
LD
SB
VSWR (TYP)
1.25:1 to 18 GHz
1.35:1 to 26.5 GHz
Male PCB Surface Mount
Catalog Number
A012-P93-04
A012-P94-04
A012-P95-04
VSWR (TYP)
1.25:1 to 18 GHz
1.35:1 to 26.5 GHz
Male PCB 4 Leg
Thru Mount R/A C/C
20
A
FD
LD
SB
GPO Cable Connectors
Catalog Number
A014-B11-01
VSWR (TYP)
1.25:1 to 26.5 GHz
Tools Recommended
A096-A99-02
L096-A99-02
A096-A99-06
Female Straight
to 0.047 S/R Cable
Assembly Procedure
AP01-002
Catalog Number
A001-B83-01
A001-B84-01
A001-B85-01
A001-B83-02
A001-B84-02
A001-B85-02
A
FD
LD
SB
FD
LD
SB
B
.328
.328
.328
.282
.282
.282
Cø
.480
.480
.480
.400
.400
.400
Dø
.093
.093
.093
.073
.073
.073
VSWR (TYP)
1.25:1 to 26.5 GHz
Male Flange Mount
to 0.047 S/R Cable
Tools Recommended
A096-A99-04
L096-A99-02
9001-942-3
Assembly Procedure
AP01-014
Catalog Number
0119-881-1
.250
GPO FEMALE
INTERFACE
.030
ACCEPTS .047
S/R CABLE
VSWR (TYP)
1.20:1 to 26.5 GHz
.134Ø
.132Ø
.100Ø
Tools Recommended
A096-A99-02
L096-A99-02
A096-A99-06
Assembly Procedure
Female Straight to 0.047 S/R Cable Solder
Attach Center Conductor
AP01-002
21
Catalog Number
A014-D11-01*
VSWR (TYP)
1.25:1 to 26.5 GHz
Tools Recommended
A096-A99-06
L096-A99-01
Assembly Procedure
Female Straight
to 0.086 S/R Cable
AP01-114
* For a flexible alternative, order A015-K11-06
to allow for heat shrink sleeve
Catalog Number
A014-D11-02
VSWR (TYP)
1.25:1 to 26.5 GHz
Tools Recommended
9001-932-3
A096-A99-06
L096-A99-01
Assembly Procedure
AP01-071
Male Straight
to 0.086 S/R Microporous Cable
Catalog Number
A001-D83-01
A001-D84-01
A001-D85-01
A001-D83-02
A001-D84-02
A001-D85-02
VSWR (TYP)
1.35:1 to 26.5 GHz
Male Flange Mount to
0.086 S/R Cable
Tools Recommended
L096-A99-01
A096-A99-04
9001-942-3
Assembly Procedure
AP01-015
22
A
FD
LD
SB
FD
LD
SB
B
.328
.328
.328
.282
.282
.282
Cø
.480
.480
.480
.400
.400
.400
Dø
.093
.093
.093
.073
.073
.073
Catalog Number
0119-399-1
.355
.325
.320
.180
.175
VSWR (TYP)
1.25:1 to 26.5 GHz
GPO FEMALE
INTERFACE
.032
.028
.030
.025
Tools Recommended
A096-A99-06
.200Ø
.132Ø
L096-A99-01
9001-932-3
.152Ø
.148Ø
2 PL.
A096-A99-02
ANTI-ROCK/EMI RING
Assembly Procedure
.118Ø
.114Ø
ACCEPTS
.086 S/R
CABLE
Female Straight to 0.086 S/R Cable
Solder Attach Center Conductor
.045Ø THRU ONE SIDE
AP01-131
Catalog Number
A014-F71-01
VSWR (TYP)
1.10:1 to 4 GHz
Tools Recommended
A096-A99-06
L096-A99-01
A096-A99-02
Assembly Procedure
IS-7804-1
Female Straight
to RG-316 Cable
Catalog Number
A014-H71-01
VSWR (TYP)
1.15:1 to 4 GHz
Tools Recommended
A096-A99-02
L096-A99-01
A096-A99-06
Assembly Procedure
AP01-039
Female Straight
to RG-178/196 Cable
23
Catalog Number
A014-K11-01
GPO FEMALE
INTERFACE
ACCEPTS I.W. M1049 (.080)
FLEX CABLE
.250
Tools Recommended
A096-A99-02
A096-A99-06
.134Ø
.132Ø
L096-A99-01
CONTACT SOLDERS
TO CABLE CENTER
CONDUCTOR
Assembly Procedure
AP01-113
Female Straight
to 0.080 Flex Cable
GPO FEMALE
INTERFACE
.265
.156
.133
.132Ø
Catalog Number
0119-202-1
Tools Recommended
A096-A99-02
.315
L096-A99-02
.488
A096-A99-08
Assembly Procedure
AP01-095
Female to
UFF-070D Flex Cable
.146Ø
.375
ADAPTER INSTALLED
GPO FEMALE
INTERFACE
.300
Catalog Number
0119-203-1
Tools Recommended
A096-A99-02
.131Ø
L096-A99-02
A096-A99-06
Assembly Procedure
Female Straight
to UFF-070D Flex Cable
24
AP01-093
Catalog Number
0119-594-1
.430
(.250)
Tools Recommended
ACCEPTS MICRO-COAX
UFF 092A FLEX CABLE
(.225)
A096-A99-02
(.135)
.032
L096-A99-01
A096-A99-06
.231
.132Ø
Assembly Procedure
CONTACT
AP01-060
GPO FEMALE
INTErFACE
(.128Ø)
(.112Ø)
CABLE STOP
(.134Ø)
2 PL.
Female Straight
to UFF-092A Flex Cable
Catalog Number
A015-B11-01
VSWR (TYP)
1.20:1 to 18 GHz
1.30:1 to 26.5 GHz
Tools Recommended
A096-A99-07
L096-A99-02
Female R/A
to 0.047 S/R Cable
A096-A99-01
Assembly Procedure
AP01-097
Catalog Number
A015-B11-02
.230
VSWR (TYP)
GPO FEMALE
INTERFACE
.192
1.25:1 to 26.5 GHz
PORT PLUG
Tools Recommended
A096-A99-01
.077Ø
.132Ø
A096-A99-07
L096-A99-02
Assembly Procedure
ACCEPTS .047 S/R CABLE
Female R/A
to 0.047 S/R Cable
AP01-097
25
Catalog Number
A015-B71-01
.231
VSWR (TYP)
.132Ø
1.25:1 to 26.5 GHz
.224
Tools Recommended
A096-A99-01
A096-A99-07
GPO FEMALE
INTERFACE
Female R/A to 0.047 S/R Cable
(High Performance)
L096-A99-02
ACCEPTS
.047Ø
S/R CABLE
Assembly Procedure
AP01-019
.268
.264
.199
.156
GPO FEMALE
INTERFACE
Catalog Number
A015-B71-03
.134
.130
VSWR (TYP)
.132Ø
1.25:1 to 18 GHz
.346
.146
1.45:1 to 26.5 Ghz
Tools Recommended
A096-A99-01
.103
L096-A99-02
Female Swept R/A
to 0.047 S/R Cable
ACCESS CONTACT
.075Ø
.112
A096-A99-01
Assembly Procedure
AP01-073
Catalog Number
A015-D11-01
VSWR (TYP)
1.20:1 to 18 GHz
1.35:1 to 26.5 Ghz
Tools Recommended
A096-A99-01
L096-A99-01
Female R/A
to 0.086 S/R Cable
A096-A99-07
Assembly Procedure
AP01-115
26
Catalog Number
A015-D11-03
.156
.056
.265
50°
.199
VSWR (TYP)
.133
1.20:1 to 18 GHz
1.35:1 to 40 Ghz
.132Ø
Tools Recommended
.263
A096-A99-02
.195
L096-A99-01
Female High Performance Swept
R/A to 0.086 S/R Cable
GPO FEMALE
INTERFACE
A096-A99-01
.104Ø
Assembly Procedure
ACCEPTS .086
S/R CABLE
AP01-072
Catalog Number
0119-300-1
VSWR (TYP)
1.35:1 to 18 GHz
1.45:1 to 26.5 Ghz
Tools Recommended
A096-A99-02
L096-A99-01
Female R/A
to 0.086 S/R Cable
A096-A99-01
Assembly Procedure
AP01-062
Catalog Number
0119-727-3-FD
0119-727-3-LD
0119-727-3-SB
VSWR (TYP)
A
FD
LD
SB
.291
.175
.110
.098Ø
THRU
2 PL.
+.002
-.002
(R/P TO FLANGE)
.194
1.25:1 to 26.5 GHz
.268
RAD.
.194
Tools Recommended
A096-A99-04
.065
.213Ø
Male R/A to 0.086 S/R Cable
.106
.203
Assembly Procedure
AP01-038
GPO MALE
"A" INTERFACE
.096
R/P
.119Ø
ACCEPTS
.086 S/R CABLE
.106
27
Catalog Number
A015-F71-01
VSWR (TYP)
1.15:1 to 3 GHz
Tools Recommended
A096-A99-02
A096-A99-01
A096-A99-08
L096-A99-01
Female R/A to RG-316 Cable
Assembly Procedure
AP01-125
Catalog Number
A015-H71-01
VSWR (TYP)
1.30:1 to 3 GHz
Tools Recommended
A096-A99-02
A096-A99-01
A096-A99-08
L096-A99-01
Female R/A to RG-178/196 Cable
Assembly Procedure
AP01-040
.265
MAX
.156
Catalog Number
0119-303-1
.133
VSWR (TYP)
.132Ø
1.30:1 to 18 GHz
.225
1.35:1 to 26.5 GHz
GPO FEMALE
INTERFACE
.408
Tools Recommended
A096-A99-06
A096-A99-01
L096-A99-01
Female R/A
to UFF-092A Flex Cable
.127Ø
Assembly Procedure
ACCEPTS MICRO-COAX
UFF 092A FLEX CABLE
28
AP01-061
Catalog Number
A016-B83-01
A016-B84-01
A016-B86-01
A
FD
LD
CM
VSWR (TYP)
1.20:1 to 26.5 GHz
Tools Recommended
A096-A99-04
9001-942-3
Male Bulkhead Mount
to 0.047 S/R Microporous Cable
L096-A99-02
Assembly Procedure
AP01-063
ACCEPTS .047
S/R CABLE
Catalog Number
0119-546-3
.220
.185
.181
.240
OCTAGON
.090
.049
.047
VSWR (TYP)
1.20:1 to 26.5 GHz
.230Ø
.177Ø
.1995Ø
.1985Ø
.075
Tools Recommended
A096-A99-04
.043
SCREWDRIVER
SLOT
9001-942-3
L096-A99-02
GPO SMOOTH BORE
INTERFACE
Assembly Procedure
Male Bulkhead Mount
Smooth Bore Thread-on to 0.047 S/R Cable
AP01-023
Catalog Number
A016-D53-01
A016-D54-01
A016-D55-01
A
FD
LD
SB
VSWR (TYP)
1.15:1 to 18 GHz
1.30:1 to 26.5 GHz
Tools Recommended
9001-942-3
L096-A99-04
Male Snap-in
to 0.086 S/R Cable
L096-A99-01
Assembly Procedure
AP01-087
29
Catalog Number
A016-D73-03
A016-D74-03
A016-D76-03
A
FD
LD
CM
VSWR (TYP)
1.15:1 to 18 GHz
1.25:1 to 26.5 GHz
Tools Recommended
A096-A99-02
Male Bulkhead Mount
to 0.086 S/R Cable
9001-932-3
A096-A99-03
L096-A99-01
Assembly Procedure
AP01-123
Catalog Number
A016-D83-01
A016-D84-01
A016-D86-01
.511
.048
.271
.160
.139
.115
VSWR (TYP)
.230Ø
.230Ø
.111Ø
1.25:1 to 26.5 GHz
.199Ø
ACCEPTS .086
S/R CABLE
.044
DRIVER
SLOT
GPO MALE
"A" INTERFACE
Male Bulkhead Mount
to 0.086 S/R Cable
R/P
.188
ACROSS
FLATS
.086
.084
Tools Recommended
A096-A99-02
L096-A99-01
A096-A99-03
Assembly Procedure
AP01-050
.515 MAX.
.141
.137
Catalog Number
A016-D83-02
.188
ACROSS
FLATS
.270
.049
.047
.160
.115
VSWR (TYP)
.232Ø
.228Ø
.232Ø
.228Ø
.111Ø
.1995Ø
.1985Ø
.044
DRIVER
SLOT
1.30:1 to 26.5 GHz
ACCEPTS .086
S/R CABLE
GPO MALE
FULL DENTENT
INTERFACE
Tools Recommended
A096-A99-02
.086
.084
R/P
Male Full Detent
Bulkhead Mount to 0.086 S/R Cable
1.20:1 to 18 GHz
.256
L096-A99-01
A096-A99-03
Assembly Procedure
AP01-050
30
A
FD
LD
CM
.524
MAX
.141
.137
Catalog Number
A016-D87-01
.270
.049
.047
.160
.115
VSWR (TYP)
1.25:1 to 18 GHz
.232Ø
.228Ø
.113Ø
.109Ø
.232Ø
.228Ø
.1995Ø
.1985Ø
1.35:1 to 26.5 GHz
A096-A99-02
L096-A99-01
GPO MALE
MODIFIED
SMOOTH BORE
INTERFACE
(.128Ø)
.044
DRIVER
SLOT
Tools Recommended
.190
.186
ACROSS
FLATS
CATCHERS MITT
.086
.084
A096-A99-03
ACCEPTS .086
S/R CABLE
R/P
Male Modified Smooth Bore Catchers Mitt
Bulkhead Mount to 0.086 S/R Cable
Assembly Procedure
AP01-050
Catalog Number
0119-447-1
.280
.147
.162
.158
VSWR (TYP)
.044
DRIVER
SLOT
1.20:1 to 10 GHz
1.30:1 to 26.5 GHz
.1855Ø
.1835Ø
.232Ø
.228Ø
Tools Recommended
.113Ø
A096-A99-04
.042
.038
L096-A99-01
A096-A99-03
Assembly Procedure
.250 HEX.
.092
.090
.028
GPO MALE
CATCHERS MITT
INTERFACE
.195
.035
.087Ø
.015Ø
Male Catchers Mitt Thread-on Bulkhead
Mount to 0.086 S/R Cable
AP01-056
Catalog Number
A016-G86-01
VSWR (TYP)
1.15:1 to 3 GHz
Tools Recommended
A096-A99-04
L096-A99-01
A096-A99-03
Assembly Procedure
AP01-029
Male Bulkhead
Mount to RD-316 Cable
31
Catalog Number
A016-H83-01
A016-H84-01
A016-H85-01
A
FD
LD
SB
VSWR (TYP)
1.20:1 to 3 GHz
Tools Recommended
A096-A99-04
L096-A99-01
Male Bulkhead Mount
to RG-178/196 Cable
A096-A99-03
A018-B71-01
Assembly Procedure
IS-7095-5
Catalog Number
A018-B71-01
A018-B71-02
A
B
FOR
"C"
PANEL
A
.495
.530
B
.221
.254
C
.093
.150
VSWR (TYP)
.292Ø
.268Ø
.131Ø
.292Ø
1.15:1 to 18 GHz
1.25:1 to 26.5 GHz
GPO FEMALE
INTERFACE
D
ACCEPTS .047 S/R AND
.047 S/R MP CABLE
Tools Recommended
A096-A99-02
L096-A99-02
Female Snap-in Float Mount to
0.047 and 0.047 S/R Microporous Cable
DIELECTRIC STOP
A096-A99-06
Assembly Procedure
IS-7582-1
Catalog Number
A018-D11-01
VSWR (TYP)
1.15:1 to 15 GHz
1.30:1 to 26.5 GHz
Tools Recommended
A096-A99-02
L096-A99-01
A096-A99-06
Female Snap-in Float Mount
to 0.086 S/R Cable
Assembly Procedure
IS-7504-1
32
D
.234
.230
Catalog Number
A018-F71-01
VSWR (TYP)
1.15:1 to 3 GHz
Tools Recommended
A096-A99-02
L096-A99-01
A096-A99-06
Assembly Procedure
Female Snap-in Float Mount
to RG-316 Cable
AP01-049
.499
Catalog Number
0119-392-3
FOR .093
PANEL AS
SHOWN
.268Ø
.222
VSWR (TYP)
.292Ø
1.15:1 to 4 GHz
.132Ø
.292Ø
Tools Recommended
A096-A99-02
GPO FEMALE
INTERFACE
L096-A99-01
ACCEPTS
RG-178
CABLE
.234
A096-A99-06
GPO CONTACT
DIELECTRIC STOP
Assembly Procedure
Female Straight Float Mount
Snap-in to RG-178 Cable
AP01-078
Catalog Number
0119-533-3
.202 [5.1]
.185 [4.7]
.155 [3.9]
.220 [5.6]
GPO MALE
.075 [1.9]
VSWR (TYP)
1.15:1 to 12 GHz
1.20:1 to 26 GHz
.292Ø [7.4]
.080Ø
[2.0]
.131Ø
[3.3]
.118Ø
[3.0]
.292Ø
[7.4]
Tools Recommended
A096-A99-02
.070Ø [1.8]
L096-A99-02
A096-A99-06
.234 [5.9]
.050Ø [1.3]
.040Ø THRU ONE WALL
Female Straight Float Mount
Snap-in to 421-042 Flex Cable
Assembly Procedure
IS-7856-1
33
Catalog Number
0119-590-3
.484
.197
.274
.066
.095
Tools Recommended
A096-A99-02
.170Ø
.280Ø
L096-A99-01
A096-A99-09
Assembly Procedure
1/4 HEX
Male Catchers Mitt Bulkhead Float
Mount to 0.141 Microporous S/R Cable
GPO MALE
CATCHERS MITT
INTERFACE
ACCEPTS .141
MICROPOROUS
S/R CABLE
AP01-045
GPO Loads
Catalog Number
A055-A11-01
A055-A11-02
Grade
TEST GRADE
FIELD GRADE
VSWR (TYP)
TEST GRADE 1.20:1 to 26.5 GHz
FIELD GRADE 1.25:1 to 26.5 GHz
Female 50 Ohm Load
Catalog Number
A055-A14-01
A055-A15-01
A055-A14-02
A055-A15-02
A
LD
SB
LD
SB
Grade
TEST GRADE
TEST GRADE
FIELD GRADE
FIELD GRADE
VSWR (TYP)
TEST GRADE 1.20:1 to 18 GHz, 1.40:1 to 26.5 GHz
FIELD GRADE 1.30:1 to 18 GHz, 1.50:1 to 26.5 GHz
Male 50 Ohm Load
34
GPO Hermetic Seals
Catalog Number
Y007-L42-03
Y007-L42-02
Y007-L42-04
A
.050
.125
.200
VSWR (TYP)
1.15:1 to 26.5 GHz
50 Ohm Hermetic Seal
GPO Blindmate Interconnects
Catalog Number
A1A1-0001-01
A1A1-0001-03
A
.254
.395
B
.114
.254
* Note: Bullets of almost any length
can be created to suit your application.
Please contact customer service for
further information.
VSWR (TYP)
1.10:1 to 8 GHz
1.35:1 to 26.5 GHz
Female Blindmate Interconnect
Catalog Number
A1A1-0001-02
VSWR (TYP)
1.10:1 to 12 GHz
1.40:1 to 26.5 GHz
35
Catalog Number
A1A1-0001-09
.675
(COMPRESS TO .600 MIN.)
.136
O-RING
.114
.114
VSWR (TYP)
1.20:1 to 8 GHz
1.40:1 to 26.5 GHz
.132Ø
.132Ø
GPO FEMALE
INTERFACE
(4 SLOT)
GPO FEMALE
INTERFACE
(6 SLOT)
Self-Adjusting
Catalog Number
A1A1-0001-34
Spring Loaded Bullet
.853
.849
.225
2 PL.
.401
.135Ø
.129Ø
2 PL.
VSWR (TYP)
1.50:1 to 26.5 GHz
.134Ø
GPO FEMALE
INTERFACE
2 PL.
36
Catalog Number
A1A1-0001-15
Catalog Number
A1A1-0001-24
.652
.650
.326
.275
.240
GPO FEMALE
INTERFACE
2 PL.
.225
.150
30° 3 PL.
.134Ø
VSWR (TYP)
1.25:1 to 18 GHz
1.35:1 to 26.5 GHz
.175Ø
2 PL.
GASKET
.175
.135
.105
GASKET
.125
GROOVE
.526
Catalog Number
A1A1-0547-01
GPO FEMALE
INTERFACE
EACH END
FOR .093
PANEL
.220
VSWR (TYP)
1.35:1 to 26.5 GHz
.292Ø
2 PL.
.132Ø
2 PL.
.268Ø
.121
.234
Female Snap-In Float Mount Adapter
37
GPO Pins
Catalog Number
Y071-L92-02
.067
.063
.009
.005
.045
.041
SOLDER DIP USING
SN63 PB37
.029Ø
.027Ø
.016Ø
.014Ø
.039Ø
.037Ø
FULL RADIUS
.018
MAX.
.175
.171
.045
.041
Catalog Number
Y071-L92-03
.009
.005
SOLDER DIP USING
SN63 PB37
.035Ø
.033Ø
.016Ø
.014Ø
.045Ø
.043Ø
FULL RADIUS
.018
MAX.
Catalog Number
Y071-L92-04
.069
.065
.045
.041
.012
.008
.016Ø
.014Ø
SOLDER DIP USING
SN63 PB37
.029Ø
.027Ø
.016Ø
.014Ø
FULL RADIUS
.018
MAX.
38
GPPO Specifications
Impedance
Frequency range
Temperature range
50 ohms nominal
DC to 65 GHz
-55oC thru 165oC
VSWR
Insertion loss
DWV@ Sea Level:
Contact resistance
Outer conductor
Inner conductor
RF leakage
1.10:1 to 26.5 GHz typical; 1.30 : 1 typical to 50 GHz
.12 f GHz
325 Vrms
5,000 megohms min.
2 milliohms max.
6 milliohms max.
-80 dB (typical mated pair)
Mate/Demate Cycles
Radial
Axial
Full Detent - 100min.; Smooth Bore - 500min.
FD - 4.5lbs.typ./7.0lbs.typ.; SB - 2.5lbs.typ./1.5lbs.typ.
0.010”
0.010” (flush to 0.010” from the reference plane)
+/-
Thermal Shock
Salt Spray
Vibration
Shock
Moisture resistance
Materials (typical)
Bodies
Outer contacts
Center contacts
Insulators
Springs
Finish (typical)
Bodies
Contacts
40
GPPO Flange Mounts
Catalog Number
B001-A23-01
B001-A25-01
B001-A23-02
B001-A25-02
A
FD
SB
FD
SB
B
.282
.282
.481
.481
Cø
.375
.375
.625
.625
D
.125
.125
.150
.150
Eø
.073
.073
.103
.103
Tools Recommended
B090-A99-08 (for - 02 series)
B090-A99-09 (for - 01 series)
B090-A99-01
Male Flange Mount
Shroud No Center Conductor
Catalog Number A
B001-N33-01
FD
B001-N35-01
SB
VSWR (TYP)
1.25:1 to 26.5 GHz
1.35:1 to 40 GHz
Male Flange Mount Shroud
Accepts 0.009 Center Conductor
GPPO Thread-In Shrouds
Catalog Number A
B003-A23-01
FD
B003-A25-01
SB
.091
Tools Recommended
B090-A99-05
.140Ø
MAX.
B097-A99-01 for FD
B097-A99-02 for SB
Assembly Procedure
GPPO MALE
"A" INTERFACE
AP01-101
.009
.007
.164-64 UNS-2A THD.
R/P
Male Thread-in Shroud No C/C
41
Catalog Number
B003-L33-01
B003-L35-01
B003-L33-02
B003-L35-02
A
FD
SB
FD
SB
B
.015
.015
.067
.065
VSWR (TYP)
1.25:1 to 26.5 GHz
1.35:1 to 40 GHz
Tools Recommended
B097-A99-01 for FD
Male Thread-in Shroud
0.012 Pin Contact
B097-A99-02 for SB
Catalog Number A
B003-L33-03
FD
B003-L35-03
SB
.496
.092
.098
GPPO MALE
"A" INTERFACE
.060
#5-44 UNF - 2A THD.
.040
VSWR (TYP)
.126Ø
.124Ø
.038Ø
1.35:1 to 26.5 GHz
1.40:1 to 40 GHz
.012Ø
.030
DRIVER
SLOT
.096Ø
2 PL.
.043
Tools Recommended
B097-A99-01 for FD
.415
.411
R/P
B097-A99-02 for SB
Male Thread-in
5°
.165
.041
.015
SOLDER COATED
WITH SN36
.030
DRIVER
SLOT
Catalog Number A
B003-L33-05
FD
B003-L35-05
SB
VSWR (TYP)
.032Ø
1.25:1 to 26.5 GHz
1.35:1 to 40 GHz
.012Ø
GPPO MALE
"A" INTERFACE
DIELECTRIC
Tools Recommended
B097-A99-01 for FD
.164 - 64 UNS - 2A THD.
(TORQUE 4-6 IN-LBS)
Male Thread-in Straight Terminal
42
.084
.080
R/P
B097-A99-02 for SB
Catalog Number A
B003-L33-06
FD
B003-L35-06
SB
.058
.054
.165
.041
SOLDER COATED
PER MPS-156
VSWR (TYP)
1.25:1 to 26.5 GHz
.030
DRIVER
SLOT
.032Ø
1.35:1 to 40 GHz
.012Ø
Tools Recommended
GPPO MALE
"A" INTERFACE
DIELECTRIC
B097-A99-01 for FD
B097-A99-02 for SB
.164 - 64 UNS - 2A THD.
(TORQUE 4-6 IN-LBS)
.084
.080
R/P
Male Thread-in Straight Terminal
Catalog Number A
B003-N33-01
FD
B003-N35-01
SB
VSWR (TYP)
1.25:1 to 26.5 GHz
1.35:1 to 40 GHz
Tools Recommended
A090-A99-07
B097-A99-01 for FD
B097-A99-02 for SB
Assembly Procedure
AP01-104
2.92mm Sparkplug
Catalog Number A
B003-N33-02
FD
B003-N35-02
SB
VSWR (TYP)
1.25:1 to 26.5 GHz
1.35:1 to 40 GHz
Tools Recommended
B097-A99-01 for FD
B097-A99-02 for SB
1.85mm Sparkplug
43
Catalog Number A
B024-L33-01
FD
B024-L35-01
SB
(.201)
.040
GPPO MALE
"A" INTERFACE
#6 - 80 SPECIAL THD.
MAJOR DIA: .1372 - .1340
PITCH DIA: .1273 - .1291
MINOR DIA: .1219 MAX
.050
RAD.
VSWR (TYP)
.157
1.25:1 to 26.5 GHz
.155Ø
1.35:1 to 40 GHz
.016Ø
.014Ø
.040
DRIVER
SLOT
.080
MIN WHEN
INSTALLED
.119Ø
Tools Recommended
B097-A99-01 for FD
.120
.044
.042
B097-A99-02 for SB
FLOATING .014Ø - .016Ø PIN
(MAX. DISENGAGEMENT .050)
.161
.155
Male Thread-in to Stripline Launch
with 0.0150 Pin
Catalog Number A
B024-L33-02
FD
B024-L35-02
SB
.499
.493
GPPO MALE
"A" INTERFACE
.060
#5-44 UNF - 2A
.092 *
VSWR (TYP)
.098
1.35:1 to 26.5 GHz
1.40:1 to 40 GHz
.091Ø
.125Ø
Tools Recommended
.040
DRIVER
SLOT
.030
Male Thread-in
B097-A99-01 for FD
.096Ø
2 PL.
B097-A99-02 for SB
.417
.409
R/P
GPPO Hermetic Shrouds
.143
.012
.009
.009
SLOTS
.020
SLOT
4 PL.
.013Ø
.011Ø
Catalog Number
B007-L43-03
VSWR (TYP)
.126Ø
.124Ø
.100Ø
.079Ø
.077Ø
.010
C'BORE
Male Full Detent High Power
63 Ohm Hermetic Shroud Solder in
44
.040
GPPO MALE
FULL DETENT
INTERFACE
R/P
.062
.058
1.25:1 to 26.5 GHz
1.35:1 to 40 GHz
.143
Catalog Number
B007-L45-01
.017
.013Ø
.011Ø
.126Ø
.124Ø
.079Ø
.077Ø
.100Ø
.010
C'BORE
GPPO MALE
SMOOTH BORE
INTERFACE
.040
R/P
Male Smooth Bore High Power
63 Ohm Hermetic Shroud Solder In
.062
.058
.143
.047
.007
Catalog Number
B007-L45-01-T
SOLDER DIP
USING
SN63 PB37
.017
.013Ø
.011Ø
.126Ø
.124Ø
.079Ø
.077Ø
.100Ø
.010
C'BORE
GPPO MALE
SMOOTH BORE
INTERFACE
.040
R/P
with Tin Dip
.062
.058
.143
Catalog Number
B007-L45-06
.015
.009
.012Ø
.126Ø
.124Ø
GPPO MALE
SMOOTH BORE
INTERFACE
.100Ø
.010
C'BORE
.040
.043
.035
R/P
.061
.059
45
Catalog Number
A
“L” Lengths
B007-M43-01-TAB-X FD .030/.050/.070/.090
B007-M45-01-TAB-X SB .030/.050/.070/.090
VSWR (TYP)
1.25:1 to 26.5 GHz
1.35:1 to 40 GHz
Full Size
Catalog Number
A
“L” Lengths
B007-M46-01-TAB-X FD .030/.050/.070/.090
VSWR (TYP)
1.25:1 to 26.5 GHz
1.35:1 to 40 GHz
Full Size
GPPO PCB Mounts
Catalog Number
B008-L13-01
B008-L15-01
VSWR (TYP)
1.35:1 to 26.5 GHz
Male PCB 4 Leg
Thru Mount Cap C/C
46
A
FD
SB
GPPO PCB Mounts
Catalog Number
B008-P33-01
B008-P35-01
A
FD
SB
.177Ø
GPPO MALE
"A" INTERFACE
.155Ø
.149
VSWR (TYP)
1.20:1 to 20 GHz
R/P
.150
.012Ø
.104
.099
4 PL.
.034
4 PL.
.100
4 PL.
.060
( WITH CONTACT
INSTALLED)
Catalog Number
A
0118-959-1-SB-TAB SB
0118-959-1-FD-TAB FD
Male PCB 4 Leg
Thru Mount Cap C/C
“L” Lengths
.055/.100
.055/.100
.015Ø
.169
.060
WHEN
INSTALLED
.157
GPPO MALE
"A" INTERFACE
VSWR (TYP)
1.20:1 to 20 GHz
.020Ø
4 LEGS
.034Ø
4 PADS
.218Ø
.100
2 PL.
.036
"L" X 10-3 IN.
4 PL.
.100
.106
4 PL.
R/P
Catalog Number
A
0118-960-1-FD-TAB FD
0118-960-1-SB-TAB SB
Male Straight to PCB Mount
with Separate R/A Pin
“L” Lengths
.055/.100
.055/.100
VSWR (TYP)
1.20:1 to 26.5 GHz
.034Ø
4 PADS
.155
GPPO MALE
"A" INTERFACE
.020Ø
4 LEGS
.218Ø
.015Ø
.034
"L"
R/P
.100
2 PL.
Male Straight to PCB Mount
.108
.104
47
GPPO PCB Mounts
Catalog Number
B009-P33-01
B009-P35-01
A
FD
SB
VSWR (TYP)
1.40:1 to 26.5 GHz
Male R/A PCB 4 Leg
Thru Mount Cap C/C
GPPO MALE
"A" INTERFACE
.135Ø
.290
Catalog Number
B009-P33-02
B009-P35-02
.020Ø
4 PL.
R/P
.134
.130
.024Ø
VSWR (TYP)
.100
2 PL.
Male R/A PCB Mount
0.135 Legs
A
FD
SB
1.40:1 to 26.5 GHz
.042Ø
4 PL.
.088
4 PL.
.135
5 PL.
.145
GPPO Edge Mounts
Catalog Number
B010-L13-01
B010-L15-01
VSWR (TYP)
1.25:1 to 26.5 GHz
Male PCB Edge Mount
48
A
FD
SB
GPPO Edge Mounts
Catalog Number
B010-L13-02
B010-L15-02
A
FD
SB
.081
.079
2 PL.
.045
.041
2 PL.
.012Ø
VSWR (TYP)
.122
.118
1.25:1 to 26.5 GHz
.157Ø
.031
.031
.056
3 PL.
.165
.125
.056
2 PL.
.012
2 PL.
GPPO MALE
"A" INTERFACE
.007
2 PL.
Male PCB Edge Launch
R/P
.120
.085
.079
Catalog Number
B010-L33-03
B010-L35-03
A
FD
SB
.346
VSWR (TYP)
.100
1.25:1 to 26.5 GHz
.018
.016
.134
MAX.
2 PL.
GPPO MALE
"A" INTERFACE
.028
.026
R/P
.165
.161
.080
.0113Ø
.143
ACCESS CONTACT
Catalog Number
B010-L33-04
B010-L35-04
A
FD
SB
.346
VSWR (TYP)
.005
.134Ø
MAX.
2 PL.
GPPO MALE
"A" INTERFACE
Male Edge Mount
with Separate Pin
.100
2 PL.
1.25:1 to 26.5 GHz
.031
.029
.016
.016
.031
.029
.165
.161
R/P
.143
.012Ø
.006
ACCESS CONTACT
49
GPPO Edge Mounts
Catalog Number
B010-L83-01
B010-L85-01
A
FD
SB
Catalog Number
B010-L83-02
B010-L85-02
A
FD
SB
R/P
.220
.187
.118
.019Ø
.143Ø
.012
2 PL.
GPPO MALE
"A" INTERFACE
.103Ø
Male PCB Edge Mount
VSWR (TYP)
1.25:1 to 26.5 GHz
50
GPPO Surface Mounts
Catalog Number
B012-L13-01
B012-L15-01
B012-L13-02
B012-L15-02
B012-L13-03
B012-L15-03
B012-L13-04
B012-L15-04
A
FD
SB
FD
SB
FD
SB
FD
SB
B
.140
.140
.052
.052
.047
.047
.163
.163
C
.093
.093
.005
.005
.093
.093
Dø
.012
.012
.012
.012
.012
.012
VSWR (TYP)
Male PCB Surface
Mount Sep C/C
1.30:1 to 20 GHz
Catalog Number
B012-P93-01
B012-P95-01
A
FD
SB
Catalog Number
B012-P93-03
B012-P95-03
VSWR (TYP)
VSWR (TYP)
1.20:1 to 20 GHz
1.20:1 to 20 GHz
A
FD
SB
GPPO MALE
"A" INTERFACE
(.083)
R/P
.150
.067
.009
.020
3PL.
.085
.020Ø
3 PL.
Male PCB Surface Mount
.175Ø
ACROSS
CORNERS
.050
.005 x 45° 3 PL.
.125Ø
.057Ø
.028
.100
.152
SQ
.050
.012Ø
Catalog Number
B012-P93-02
B012-P95-02
VSWR (TYP)
1.20:1 to 20 GHz
A
FD
SB
GPPO MALE
"A" INTERFACE
(.083)
.108
R/P
.026
.024
.012Ø
.075
4 PL.
.113
.165Ø
2 PL.
.020Ø
4 LEGS
.057Ø
.028
.085
SQ.
Male Coplanar Surface Mount
51
GPPO Surface Mounts
.226
.078
Catalog Number
B013-L93-01
B013-L95-01
.200Ø
ACROSS
CORNERS
.100
.146Ø
.151
.078
VSWR (TYP)
.143
GPPO MALE
"A" INTERFACE
.078
1.20:1 to 20 GHz
R/P
SOLDER DIP
PER MPS-160
.156
.012Ø
Male R/A Surface Mount
.060Ø
(.030)
GPPO Cable Connectors
Catalog Number
B014-B11-01
VSWR (TYP)
1.15:1 to 26.5 GHz
1.25:1 to 40 GHZ
Tools Recommended
B096-A93-01
A096-A99-04
L096-A99-02
Female Straight
to 0.047 S/R Cable
Assembly Procedure
AP01-133
Catalog Number
B014-D11-01
VSWR (TYP)
1.15:1 to 26.5 GHz
1.30:1 to 40 GHZ
Tools Recommended
B096-A93-01
A096-A99-04
L096-A99-01
Assembly Procedure
Female Straight
to 0.086 S/R Cable
52
AP01-148
A
FD
LD
Catalog Number
B014-K11-01
.265
GPPO FEMALE
INTERFACE
.124Ø
Tools Recommended
B096-A93-01
.094Ø
A096-A99-04
.091Ø
L096-A99-01
Assembly Procedure
AP01-108
Female Straight
to M1049 (0.080) Flex Cable
.202
R/P
Catalog Number
0118-968-3
Tools Recommended
.700
B096-A93-01
A096-A99-04
.298
GPPO FEMALE
INTERFACE
.266
L096-A99-01
Assembly Procedure
AP01-143
.091Ø
.128Ø
HOUSING
ACCEPTS STORM
421-1006-001
CABLE
.501
R/P
CABLE STOP
Female to
421-1006-001 Cable
Catalog Number
B015-B11-01
VSWR
1.20:1 to 10 GHz
1.30:1 to 20 GHz
Tools Recommended
B096-A93-01
L096-A99-02
A096-A99-09
Assembly Procedure
AP01-080
Female R/A
to 0.047 S/R Cable
53
Catalog Number
B015-B11-02
VSWR
1.25:1 to 18 GHz
1.35:1 to 26.5 GHz
Tools Recommended
B096-A93-01
A096-A99-10
L096-A99-02
Assembly Procedure
AP01-076
Catalog Number
B015-B11-04
.400
VSWR
.361
.109
PORT PLUG
1.10:1 to 5 GHz
.109Ø
1.30:1 to 10 GHz
.091Ø
Tools Recommended
.149
.045
B096-A93-01
A096-A99-09
CABLE STOP
GPPO FEMALE
INTERFACE
L096-A99-02
ACCEPTS .047
S/R CABLE
Female R/A
to 0.047 S/R Cable
Assembly Procedure
AP01-150
Catalog Number
0118-927-1
.229
.137
.170
VSWR
.137
1.20:1 to 18 GHz
.091Ø
1.30:1 to 26.5 GHz
.093
.267
GPPO FEMALE
INTERFACE
.153
Tools Recommended
B096-A93-01
A096-A99-10
CABLE STOP
Female R/A
to 0.047 S/R Cable
L096-A99-02
.076Ø
Assembly Procedure
AP01-122
54
Catalog Number
B015-D11-01
VSWR (TYP)
1.25:1 to 12 GHz
1.35:1 to 18 GHz
Tools Recommended
B096-A93-01
A096-A99-10
L096-A99-01
Assembly Procedure
AP01-112
Catalog Number
B015-D11-02
R/P
.236
.150
.181
VSWR (TYP)
.024
1.25:1 to 12 GHz
1.35:1 to 18 GHz
Tools Recommended
.091Ø
.114Ø
.182
B096-A93-01
.059
A096-A99-10
CABLE STOP
L096-A99-01
Catalog Number
B016-B33-01
B016-B35-01
GPPO FEMALE
INTERFACE
A
FD
SB
VSWR (TYP)
1.25:1 to 26.5 GHz
1.35:1 to 40 GHz
Tools Recommended
B096-A99-01
L096-A99-02
Assembly Procedure
Male Snap-in
to 0.047 S/R Cable
AP01-094
55
.125
PANEL
.038
.071
A
FD
SB
.013
.044
GPPO MALE
"A" INTERFACE
Catalog Number
B016-B33-02
B016-B35-02
VSWR (TYP)
.132Ø
2 PL.
1.25:1 to 26.5 GHz
1.35:1 to 40 GHz
.094Ø
.142Ø
Tools Recommended
.077Ø
.150Ø
B096-A99-01
L096-A99-02
.030
DRIVER
SLOT
.087
.085
.030
Male Bulkhead
R/P
.125
ACROSS
FLATS
Assembly Procedure
ACCEPTS .047
S/R CABLE
AP01-110
Catalog Number
0118-961-4
.470
.185
GPPO FEMALE
INTERFACE
.146Ø
.144Ø
2 PL.
.168
.114
VSWR (TYP)
1.10:1 to 12 GHz
.026
1.25:1 to 26.5 GHz
.188Ø
.091Ø
Tools Recommended
B096-A93-01
A096-A99-09
ACCEPTS .047
S/R CABLE
.164Ø
INSTALLED
Female Snap-In Bulkhead
Assembly Procedure
.372
AP01-103
.417
.302
.080
L096-A99-02
Catalog Number
B016-D33-01
B016-D35-01
FOR
.093
PANEL
VSWR (TYP)
1.25:1 to 26.5 GHz
.146Ø
.178Ø
2 PL.
.130Ø
1.35:1 to 40 GHz
Tools Recommended
GPPO MALE
"A" INTERFACE
.003
.156Ø
ACCEPTS .086
S/R CABLE
B096-A99-01
L096-A99-01
R/P
Male Snap-in
to 0.047 S/R Cable
56
.135
TO PANEL
Assembly Procedure
AP01-092
A
FD
SB
Catalog Number
B016-D33-02
B016-D35-02
A
FD
SB
.125
PANEL
GPPO MALE
"A" INTERFACE
VSWR (TYP)
.038
.096
.044
.132Ø
2 PL.
1.25:1 to 26.5 GHz
1.35:1 to 40 GHz
.115Ø
Tools Recommended
.142Ø
.150Ø
B096-A99-01
L096-A99-01
.030
DRIVER
SLOT
Assembly Procedure
.087
.085
.030
AP01-111
R/P
Catalog Number
0118-928-4-CM
Male Snap-in
to 0.086 S/R Cable
ACCEPTS .086
S/R CABLE
.125
ACROSS
FLATS
(.751)
.436
.151
VSWR (TYP)
.168
.122
.025
80 TPI KNURL
.070
1.18:1 to 18 GHz
.188Ø
.157Ø
.153Ø
1.35:1 to 30 GHz
Tools Recommended
.124Ø
.147Ø
B096-A99-02
L096-A99-01
Assembly Procedure
AP01-090
GPPO MALE
CATCHERS MITT
INTERFACE
.182Ø
INSTALLED
.083
.168Ø
ACCEPTS .086
S/R CABLE
.164Ø
.162Ø
R/P
.589
Catalog Number
B019-D36-01
Male Catchers Mitt
Snap-in Float Mount to 0.086 S/R Cable
.318
.168
.238
.070
.025
.188Ø
.436
.151
Tools Recommended
.157Ø
.153Ø
B096-A99-02
PORT PLUG
.020Ø
.040 X 45°
2 PL.
.175
SQ.
.147Ø
Assembly Procedure
.090
.020 X 45°
2 PL.
AP01-145
.182Ø
INSTALLED
(.083)
R/P
GPPO MALE
CATCHERS MITT
INTERFACE
.270
.185
CABLE STOP
.124Ø
.353
.164Ø
.162Ø
ACCEPTS .086
S/R CABLE
.120Ø
80 TPI KNURL
.168Ø
Male Catchers Mitt R/A
Float Mount to 0.086 S/R Cable
57
Catalog Number
A
B019-K36-01
0.580
B019-K36-02
0.470
B019-K36-03
0.705
.580
.168
.500
.436
.070
PORT PLUG
.025
.151
.175
SQ.
.188Ø
.157Ø
.153Ø
.124Ø
B
0.500
0.390
0.625
.020
Tools Recommended
.147Ø
B096-A99-02
.090
.470
.182Ø
INSTALLED
(.083)
R/P
GPPO MALE
CATCHERS MITT
INTERFACE
CABLE STOP
80 TIP KNURL
Assembly Procedure
AP01-134
.385
.353
.164Ø
.162Ø
.168Ø
ACCEPTS STORM
.120Ø CABLE
Male Catchers Mitt R/A
Float Mount to 0.086 S/R Cable
.144Ø
Catalog Number
B016-B11-01
.462
.179
.166
.026
.114
GPPO FEMALE
INTERFACE
VSWR (TYP)
1.10:1 to 12 GHz
1.25:1 to 26.5 GHz
.188Ø
.091Ø
Tools Recommended
B096-A93-01
.164Ø
INSTALLED
A096-A99-09
.146Ø
.144Ø
2 PL.
ACCEPTS .047
S/R CABLE
.409
L096-A99-02
Assembly Procedure
AP01-103
Female Snap-in Bulkhead
.524
.179
.026
.166
Catalog Number
0118-958-1
VSWR (TYP)
1.15:1 to 18 GHz
1.50:1 to 40 GHz
.091Ø
Tools Recommended
B096-A93-01
.146Ø
.144Ø
2 PL.
.164Ø
INSTALLED
GPPO FEMALE
INTERFACE
58
L096-A99-01
.364
.424
Female Snap-in Bulkhead
A096-A99-09
.188Ø
R/P
Assembly Procedure
AP01-120
Catalog Number
0118-958-4
.532
.185
.026
.188Ø
.168
.114
VSWR (TYP)
1.15:1 to 18 GHz
1.50:1 to 40 GHz
.091Ø
Tools Recommended
B096-A93-01
A096-A99-09
.146Ø
.144Ø
2 PL.
.164Ø
INSTALLED
L096-A99-02
GPPO FEMALE
INTERFACE
.372
Assembly Procedure
Female Snap-in Bulkhead Mount
to 0.086 S/R Cable
.432
AP01-142
R/P
.380
Catalog Number A
B001-D33-01
FD
B001-D35-01
SB
.165
.100
CENTER CONTACT
VSWR (TYP)
1.30:1 to 40 GHz
.480Ø
.112Ø
2 PL.
.328
GPPO MALE
"A" INTERFACE
Assembly Procedure
ACCEPTS .086
S/R CABLE
AP01-119
.207
C'SINK .140Ø x 82°
.073Ø THRU 2 PL.
.084
.082
R/P
Male 2 Hole Flange Mount
to 0.086 S/R Cable
Catalog Number A
B001-K33-01
FD
B001-K35-01
SB
.388
.165
.171
.045
DIELECTRIC
Tools Recommended
B096-A99-01
L096-A99-03
.480Ø
.144Ø .164Ø
.328
GPPO MALE
"A" INTERFACE
L096-A99-01
ACCEPTS .116
S/R CABLE
Assembly Procedure
AP01-106
CENTER
CONTACT
.191
#2 56 UNC-2B 2 PL.
.084
.082
R/P
Male Flange Mount
to 0.116 S/R Cable
59
GPPO Loads
Catalog Number
B055-A11-01
B055-A11-02
Grade
TEST GRADE
FIELD GRADE
VSWR (TYP)
TEST GRADE : 1.15 + .011 x F(GHz):1 to 40 GHz
FIELD GRADE : 1.15 + .013 x F(GHz):1 to 40 GHz
Female 50 Ohm Load
.203
.151
.109
Catalog Number
B055-A11-05
.109
.091Ø
VSWR (TYP)
1.30:1 to 12 GHz
GPPO FEMALE
INTERFACE
.209
.235
Female Low Profile R/A Load
.104Ø
Catalog Number
B055-A13-01
B055-A15-01
B055-A13-02
B055-A15-02
A
FD
SB
FD
SB
B
TEST GRADE
TEST GRADE
FIELD GRADE
FIELD GRADE
VSWR (TYP)
TEST GRADE : 1.20:1 to 18 GHz, 1.30:1 to 40 GHz
FIELD GRADE : 1.20:1 to 18 GHz, 1.50:1 to 40 GHz
Male 50 Ohm Load
60
GPPO Loads
Catalog Number
B055-A11-06
Female 1/2 Watt Load
GPPO Hermetic Seals
Catalog Number
Y007-L42-01
Y007-L42-05
A
0.125
0.091
B
0.047
0.039
VSWR (TYP)
1.25:1 to 26.5 GHz
1.35:1 to 40 GHz
50 Ohm Hermetic Seal
61
GPPO Blindmate Interconnects
Catalog Number
B1B1-0001-05
.167
.165
VSWR (TYP)
1.15:1 to 18 GHz
1.35:1 to 40 GHz
.091Ø
2 PL.
.095Ø
GPPO FEMALE
INTERFACE
BOTH ENDS
(0.166 Long)
Catalog Number
B1B1-0001-01
B1B1-0001-02
B1B1-0001-03
B1B1-0001-07
B1B1-0001-08
B1B1-0001-09
L
0.210
0.500
0.327
0.260
0.349
0.278
VSWR (TYP)
1.15:1 to 18 GHz
1.25:1 to 40 GHz
.168Ø
Catalog Number
0118-921-1
.500
.118
(.087)
2 PL.
.109Ø
.106Ø
2 PL.
.040
VSWR (TYP)
1.10:1 to 18 GHz
.091Ø
2 PL.
GPPO FEMALE
INTERFACE
With Centering Ring
62
GPPO FEMALE
INTERFACE
CENTERING RING
1.20:1 to 40 GHz
GPPO Blindmate Interconnects
Catalog Number
B1B1-0001-10
.089
2 PL.
.120
GPPO FEMALE
INTERFACE
BOTH SIDES
Catalog Number
B1B1-0001-11
.412
Female Spring Loaded Bullet
0.412 Relaxed Length
.646
.121Ø
MAX.
GPPO FEMALE
INTERFACE
BOTH SIDES
Spring Loaded Bullet
.646 Relaxed Length
63
GPPO Pins
Catalog Number
Y071-L02-01
.074
.007
.025
.012Ø
.023Ø
.019Ø
Catalog Number
Y071-L92-01
.170
.040
.0075
.0065
.012Ø
64
.0035
.0025
G3PO Specifications
Impedance
Frequency range
Temperature range
50 ohms nominal
DC to 100 GHz
-55oC thru 165oC
VSWR
Insertion loss
DWV@ Sea Level:
Contact resistance
Outer conductor
Inner conductor
RF leakage
1.10:1 to 26.5 GHz typical; 1.25 : 1 typical to 65 GHz
.12 f GHz
250 Vrms
3,500 megohms min.
2 milliohms max.
6.0 milliohms max.
Mate/Demate Cycles
Radial
Axial
Self-centering (male)*
Full Detent - 100min; Smooth Bore - 500min.
Full Detent - 3.5lbs.typ./6.0lbs.typ.; SB - 1.6lbs.typ./2.5lbs.typ.
0.010”
0.010” (flush to -0.010” from the reference plane)
+/-
Thermal Shock
Salt Spray
Vibration
Shock
Moisture resistance
Materials (typical)
Bodies
Outer contacts
Center contacts
Insulators
Springs
Finish (typical)
Bodies
Contacts
66
G3PO PCB Mounts
Catalog Number
R008-L13-02
.150
.050
.010
SOLDER DIP USING
Sn63 Pb37
VSWR (TYP)
1.15:1 to 40 GHz
1.25:1 to 65 GHz
.009Ø
.090Ø
Male Full Detent
PCB Thru Mount
.012
G3PO MALE
FULL DETENT
INTERFACE
.101
R/P
G3PO MALE
CATCHERS MITT
INTERFACE
Catalog Number
R008-L16-01
.040
.102Ø
VSWR (TYP)
1.20:1 to 40 GHz
.084
.027
.031
1.30:1 to 65 GHz
.010
.027
.031
.060
2 PL.
Male Catchers Mitt PCB Shroud
with Nailhead Pin
.020Ø
2 PL.
G3PO Edge Mounts
Catalog Number
R010-L13-03
R010-L15-03
A
FD
SB
.094
.123
VSWR (TYP)
1.20:1 to 40 GHz
.043 2 PL.
.041 2 PL.
.010Ø
.008Ø
.115Ø
G3PO MALE
TAB DETENT
INTERFACE
.017
2 PL.
.008
2 PL.
PCB Edge Mount
67
G3PO Edge Mounts
Catalog Number
R032-V53-01
.216
.117
VSWR (TYP)
.048
1.20:1 to 40 GHz
G3PO MALE
FULL DETENT
INTERFACE
R/P
Male Full Detent
Dual Port Edge Mount
.150
.212
.224
2 PL.
.123
.041
5 PL.
.016Ø
2 PL.
.025
3 PL.
#00-96 THRU
.266
.071
2 PL.
.015 X 45° 2 PL.
.038
2 PL.
G3PO Surface Mount
Catalog Number
R012-T95-01
.098
.070Ø
.090Ø
G3PO SMOOTH BORE
INTERFACE
Male Smooth Bore
Solder Attach Shroud
68
.049
R/P
G3PO Cable Connectors
.238
Catalog Number
R014-B11-01
.104Ø
VSWR (TYP)
1.20:1 to 40 GHz
.077Ø
.063Ø
1.30:1 to 65 GHz
Female Straight to 0.047 S/R Cable
G3PO FEMALE
INTERFACE
.133
.193
CABLE STOP
Catalog Number
R014-B13-01
R014-B15-01
VSWR (TYP)
A
FD
SB
.252
.077Ø
.104Ø
1.20:1 to 40 GHz
1.30:1 to 65 GHz
.090Ø
Male Straight to 0.047 S/R Cable
G3PO MALE
"A" INTERFACE
.158
R/P
CABLE STOP
.238
.123Ø
Catalog Number
R014-K11-01
.063Ø
.077Ø
G3PO FEMALE
INTERFACE
Female Straight to 0.058 Flex Cable
.131
.193
R/P
CABLE STOP
69
G3PO Cable Connectors
Catalog Number
R033-K54-01
.160
.275
.074
.067
2 PL.
VSWR (TYP)
1.20:1 to 40 GHz
1.30:1 to 65 GHz
.222
G3PO MALE
LIMITED DETENT
INTERFACE
.117
.267
Male Limited Detent
Dual Port to 0.058 Flex Cable
.090
.115
R/P
.158
2 PL.
CABLE STOP
G3PO Loads
Catalog Number
R055-A11-01
.258
VSWR (TYP)
.052
1.20:1 to 18 GHz
1.30:1 to 40 GHz
.042
.104Ø
2 PL.
.063Ø
Female 50 Ohm Load
G3PO FEMALE
INTERFACE
Catalog Number
R055-A13-01
R055-A15-01
VSWR (TYP)
.258
1.20:1 to 18 GHz
1.30:1 to 40 GHz
.086Ø
Male 50 Ohm Load
G3PO MALE
"A" INTERFACE
70
.104Ø
FD
SB
G3PO Blindmate Interconnects
.098
Catalog Number
R1R1-0001-01
.042
.042
VSWR (TYP)
1.15:1 to 40 GHz
.063Ø
2 PL.
1.25:1 to 65 GHz
Female Blindmate
Interconnect
.068Ø
G3PO FEMALE
INTERFACE
BOTH ENDS
.500
Catalog Number
R1R1-0001-02
.042
.042
VSWR (TYP)
.068Ø
2 PL.
1.15:1 to 40 GHz
1.25:1 to 65 GHz
.068Ø
G3PO FEMALE
INTERFACE
BOTH ENDS
"A"
Catalog Number
R1R1-0001-03-118
R1R1-0001-03-134
R1R1-0001-03-188
VSWR (TYP)
A
0.118
0.134
0.188
.042
.063Ø
2 PL.
1.15:1 to 40 GHz
.042
.068Ø
1.25:1 to 65 GHz
G3PO FEMALE
INTERFACE
BOTH ENDS
71
G3PO Pin
Catalog Number
Y071-L02-02
.074
.047
.042
.018Ø
.009Ø
.016Ø
Surface Mount Pin
72
GMS Specifications
Impedance
Frequency range
Temperature range
50 ohms nominal
DC to 23 GHz
-55oC thru 165oC
VSWR
Insertion loss
DWV@ Sea Level:
Contact resistance
Outer conductor
Inner conductor
RF leakage
1.20+.005x f(GHz) (typical mated pair)
.03x f GHz
1,500 Vrms
1,000 megohms min.
2 milliohms max.
2.5 milliohms max.
Durability
Radial
Axial
Self-centering (male)*
5000+ mate/demate cycles
2.5 pounds max.
.020
.060
Thermal Shock
Salt Spray
Vibration
Shock
Moisture resistance
Materials (typical)
Bodies
Outer contacts
Center contacts
Insulators
Springs
CRES 303 per ASTM A484 and ASTM A582 and or/
ASTM A555 and ASTM A581
Finish (typical)
Bodies
Passivate per MIL-F-14072 E300
Contacts
74
GMS Flange Mounts
.331
Catalog Number
H001-N11-01
18°
4 PL.
.060
.103Ø 2 PL.
.007
.003
.101
VSWR (TYP)
1.20:1 to 15 GHz
1.30:1 to 23 GHz
.295Ø
.343Ø
.180Ø
.480
Jack 2 Hole Flange Mount
Accepts 0.015 C/C
.240
303 STAINLESS STEEL
.316Ø
.625Ø
GMS JACK
INTERFACE
Catalog Number
H001-L11-01
.633
.060Ø
VSWR (TYP)
.050Ø
1.20:1 to 15 GHz
1.30:1 to 23 GHz
.480
.625Ø
.343Ø
GMS JACK
INETRFACE
.103Ø
2 PL.
.162Ø
.227
R/P
.333
.297
Jack 2 Hole Flange
to Post Terminal
.471
Catalog Number
H001-M11-01
.103Ø
2 PL.
.060
VSWR (TYP)
.100
1.20:1 to 15 GHz
.480
2
.008 X .032 TAB
1.30:1 to 23 GHz
.343Ø
1
.625Ø
.106Ø
GMS JACK
INTERFACE R/P
1
2
PIN SHIPPED
SEPARATELY
DIMENSION AS INSTALLED
.333
.135
Jack 2 Hole Flange
to Tab Terminal
75
GMS Flange Mounts
.331
.060
Catalog Number
H001-L11-03
18°
4 PL.
.007
.003
.135
.10
.087
VSWR (TYP)
1.20:1 to 15 GHz
1.30:1 to 23 GHz
.240
.202Ø
.343Ø
.162Ø
Jack 2 Hole Flange
Mount to Post
.295Ø
.480
.050Ø
.316Ø
GMS JACK
INTERFACE
.625Ø
.103Ø THRU 2 PL.
.375
.150
Catalog Number
1804-229-3
.187
.335
.125
.065
Assembly Procedure
.100
AP18-008
.650Ø
.343Ø
.520
SOLDER POT FOR
18 GAGE WIRE
.316Ø
Jack 2 Hold Flange Mount
to 18 Gage Wire DC Application
.365Ø
.005
.001
#2-56 UNC-2B THD
THRU (2) PL.
.331
.060
18°
4 PL.
.006
.004
.087
Catalog Number
H001-N11-02
GMS JACK
INTERFACE
VSWR (TYP)
.480
1.20:1 to 15 GHz
1.30:1 to 23 GHz
.180Ø
.343Ø
.295Ø
Jack 2 Hold Flange Mount
Accepts 0.015 C/C
.240
.316Ø
.625Ø
.103Ø THRU
2 PL.
76
GMS Flange Mounts
.331
.060
Catalog Number
H001-N11-03
.325
.008
.002
.087
GMS JACK
INTERFACE
VSWR (TYP)
1.20:1 to 15 GHz
1.30:1 to 23 GHz
.480
.343Ø
.180Ø
.240
Accepts 0.015 C/C
.316Ø
.625Ø
.103Ø THRU
2 PL.
.331
.295Ø
.060
Catalog Number
1816-204-3
.007
.003
.102Ø 2 PL.
18°
4 PL.
.229
.100
.050Ø
.035Ø
.625Ø
.240
.343Ø
.180Ø
.480
.100
to Solder Pot Terminal
.316Ø
GMS JACK
INTERFACE
.331
.500
SQ.
.060
Catalog Number
1812-400-3
.006
.004
.102Ø
THRU
4 PL.
.10
.340
SQ.
(.008)
VSWR (TYP)
1.20:1 to 15 GHz
1.30:1 to 23 GHz
.343Ø
.106Ø
.10 WHEN
INSTALLED
.316Ø
GMS JACK
INTERFACE
.180Ø
.625Ø
.135
to Tab Terminal
.320
.008
TAB
77
GMS Flange Mounts
.630
.340
.417
.413
.170
Catalog Number
W001-L11-01
.340
.060
.050
.030Ø
VSWR (TYP)
1.20:1 to 15 GHz
.480
1.30:1 to 23 GHz
.310Ø
.191Ø
.240
CONTACT
Female Smooth Bore High Power
Shroud Straight Terminal
(.184)
.625Ø
.102Ø
2 PL.
JGMS FEMALE SMOOTH BORE
HIGH POWER INTERFACE
ACCEPTS .060Ø PIN CONTACT
.240
.232
DIELECTRIC
R/P
.630
.340
Catalog Number
W001-L11-02
.417
.413
.340
.170
.060
.050
VSWR (TYP)
.030Ø
1.20:1 to 15 GHz
1.30:1 to 23 GHz
.480
.310Ø
.191Ø
.240
Female Full Detent High Power
Shroud Straight Terminal
CONTACT
(.184)
.625Ø
.102Ø
2 PL.
JGMS FEMALE FULL DETENT
.240
.232
DIELECTRIC
R/P
.038
Catalog Number
W001-L11-03
60°
.022
.010
.005
VSWR (TYP)
.671
1.20:1 to 15 GHz
.417
.413
.340
.100
.170
1.30:1 to 23 GHz
.340
.050
Female Smooth Bore HIgh Power
Shroud Dog Leg Terminal
.480
.191Ø
.050
.310Ø
.240
CONTACT
JGMS FEMALE SMOOTH BORE
.625Ø
.102Ø
2 PL.
78
DIELECTRIC
.240
.232
R/P
GMS Thread-In Shrouds
.457
Catalog Number
H003-L11-01
.331
1/4-36 UNS-2A THD
.266
VSWR (TYP)
1.20:1 to 15 GHz
1.30:1 to 23 GHz
PIN DETAIL
.087
3/8 HEX
STOCK
.310
.235
.005
.002
.105
.106Ø
.345Ø
Jack Thread Mount
with Special Launch
.004
.343Ø
GMS JACK
INTERFACE
.018Ø
.035
MAX.
.032Ø
.120
DIELECTRIC
.457
Catalog Number
1816-203-3
VSWR (TYP)
1.20:1 to 15 GHz
.331
OUTER
SHELL
RECOMMENDED
MOUNTING HOLE
.120
.266
3/8
HEX STOCK
.170
.035
MAX
.087
1.30:1 to 23 GHz
.060
.060
.343Ø
.345Ø
R/P
.021Ø
.018Ø
2 PL.
EXTENDED
HOUSING
.005
.002
GMS JACK
INTERFACE
Catalog Number
1816-206-3
Jack Thread Mount
with Special Launch
.127Ø
1/4 - 36 UNS-2A THD.
.326
OUTER
CONDUCTOR
R/P
.458
VSWR (TYP)
.005
.002
GMS JACK
INTERFACE
1.20:1 to 15 GHz
1/4-36 UNS-2A THD.
1.30:1 to 23 GHz
.018Ø
.032Ø
.345Ø
Jack Thread Mount
with Special Launch
.106Ø
.343Ø
.075
.350
.087
3/8
HEX STOCK
.266
.331
HOUSING
.119
EXTENDED
DIELECTRIC
.030
79
GMS Thread-In Shrouds
.315
.169
.255
.095
.091
PANEL
THICKNESS
Catalog Number
1815-606-3
.194
.473Ø
SNAP
RING
.159Ø
DIELECTRIC
.270Ø
GMS, Plug, Snap-in,
Float Mount to
Coplanar Waveguide
.050Ø
CONTACT
.250
ACROSS
FLATS
GMS PLUG
INTERFACE
.250 UNS-2A THD.
.139
.252
.402Ø
R/P
.239
.457
3/8 HEX
GMS JACK
INTERFACE
Catalog Number
H003-N11-01
.126
.065
ACCEPTS
.015Ø X .110
MAX PIN
VSWR (TYP)
1.20:1 to 15 GHz
1.30:1 to 23 GHz
.343Ø
.209Ø
Tools Recommended
9001-906-3
1/4 - 36 UNS - 2A
3/8 HEX
.454
R/P
Assembly Procedure
R/P
AP18-005
Jack Thread-in
Accepts 0.015 C/C
GMS Edge Mount
Catalog Number
1816-208-1
(.750)
3 PL.
.625
.101
45°
VSWR (TYP)
.235
.231
.050
.080
.076
.015Ø
1.20: 1 to 15 GHz
.070
.066
2 PL.
.343Ø
.290Ø
.152Ø
.148Ø
Jack Edge Mount
GMS JACK
INTERFACE
R/P
.009
.005
2 PL.
.020
.319Ø
.313Ø
.625
.612
.127
.123
3 PL.
80
.070
.066
2 PL.
GMS Cable Connectors
Catalog Number
H001-D32-01
.270Ø
.360Ø
.090
VSWR (TYP)
.360Ø
1.15:1 to 8 GHz
.650Ø
.120Ø
.520
1.25:1 to 23 GHz
.270Ø
Tools Recommended
H096-A99-01
GMS PLUG
INTERFACE
L096-A99-01
R/P
Assembly Procedure
AP18-001
1
R/P
.225 (.195 MATED)
#2 - 56 UNC -2B
2 PL.
Plug Float Mount to 0.086 S/R Cable
1
.323
CABLE OUTER CONDUCTOR
REF. PLANE
Catalog Number
H025-D32-01
.681
VSWR (TYP)
.402Ø
3 PL.
SNAP RING
GMS PLUG
INTERFACE
1.15:1 to 8 GHz
.473Ø
1.25:1 to 23 GHz
.120Ø
.270Ø
Tools Recommended
H096-A99-01
.137 (.107 MATED)
L096-A99-01
Assembly Procedure
AP18-001
1
REF. PLANE
.331
Plug Snap-in Float Mount
to 0.086 S/R Cable
R/P
1
.681
Catalog Number
H018-D32-04
VSWR (TYP)
R/P
FOR
.093
PANEL
.324
.255
.083
.077
GMS PLUG
INTERFACE
1.15:1 to 8 GHz
1.25:1 to 23 GHz
Tools Recommended
H096-A99-01
L096-A99-01
.359Ø
.120Ø
.270Ø
Plug Float Mount to 0.086 S/R Cable
Assembly Procedure
AP18-001
ACCEPTS .086
S/R CABLE
.252
R/P
81
Catalog Number
H018-E32-01
.680
.255
.322
.083
.077
.402Ø
.270Ø
Plug Float Mount Snap-In
to 0.086 S/R MP Haverhill Cable
.095 PANEL
.091 THICKNESS
.473Ø
.120Ø
GMS PLUG
INTERFACE
ACCEPTS .086 S/R
MP HAVERHILL CABLE
.250
.151
DIELECTRIC STOP
SNAP RING
R/P
ACCEPTS CONTACT
Catalog Number
H014-D11-02
.581
.335
.157
.065
VSWR (TYP)
1.15:1 to 8 GHz
.100
1.25:1 to 23 GHz
.125Ø
.480
.343Ø
.120Ø
.180Ø
.240
to 0.086 S/R Cable
GMS JACK
INTERFACE
Tools Recommended
.625Ø
A096-A99-09
L096-A99-01
Assembly Procedure
.316Ø
AP18-001
.057
.102Ø
2 PL.
18°
4 PL.
Catalog Number
H001-D11-01
.579
.465
R/P
.267
.065
1
R/P
VSWR (TYP)
1.15:1 to 8 GHz
1.20:1 to 23 GHz
.481
.625Ø
.343Ø
.120Ø
Tools Recommended
A096-A99-09
L096-A99-01
to 0.086 S/R Cable
.103Ø
2 PL.
Assembly Procedure
AP18-001
1
82
GMS JACK
INTERFACE
REF. PLANE
Catalog Number
H016-D11-01
.375
ACROSS FLATS
2 PL.
VSWR (TYP)
.568
1.15:1 to 8 GHz
1.20:1 to 23 GHz
.368Ø
GMS JACK
INTERFACE
Tools Recommended
A096-A99-09
.120Ø
.450Ø
2 PL.
L096-A99-01
Assembly Procedure
FOR .093
PANEL
.428
AP18-001
R/P
1
R/P
Jack Bulkhead
to 0.086 S/R Cable
.465
REF. PLANE
1
.581
Catalog Number
H025-D11-01
.428
.095
.091
PANEL
VSWR (TYP)
.050
.228
1.30:1 to 23 GHz
.402Ø
Tools Recommended
A096-A99-09
.120Ø
.473Ø
L096-A99-01
GMS JACK
INTERFACE
.325
R/P
Catalog Number
H018-D32-05
VSWR (TYP)
1.20:1 to 14 GHz
.315
GMS PLUG
INTERFACE
.256
.254
SNAP
RING
SNAP RING
ACCEPTS .086
S/R CABLE
Jack Snap Mount
to 0.086 S/R Cable
.150 FOR PANEL
.257
FERRULE
Tools Recommended
A096-A99-09
.270Ø
L096-A99-01
Assembly Procedure
ACCEPTS .086
S/R CABLE
.250
AP18-006
.141
.473Ø
R/P
.403Ø
.401Ø
Plug Snap Mount
to 0.086 S/R Cable
83
Catalog Number
H019-R32-01
#2 -56 UNC - 2B 2 PL.
.833
.360Ø
GMS PLUG
INTERFACE
Tools Recommended
.650Ø
.080
H096-A99-01
L096-A99-10
.360Ø
.798
Assembly Procedure
.270Ø
AP18-009
.520
.326
.472
R/P
R/P 1
.247
(.217 MATED)
Plug Float Mount R/A Flange Mount
Accepts 0.141 S/R Cable
.703
.170Ø
1
ACCESS
CONTACT
REF. PLANE
Catalog Number
H018-S32-01
GMS PLUG
INTERFACE
GMS ACCESS
CONTACT
.681
.402Ø 3 PL.
Tools Recommended
H096-A99-01
L096-A99-10
.473Ø
.180Ø
.270Ø
Assembly Procedure
AP18-019
.148 (.118 MATED)
R/P
Plug Snap-in Float Mount
to 0.141 Low Loss Cable
FOR .093 PANEL
.208
R/P
1
1
REF. PLANE
Catalog Number
H001-R32-01
VSWR (TYP)
.681
.080
.360Ø
GMS PLUG
INTERFACE
.650Ø
1.14:1 to 18 GHz
1.35:1 to 23 GHz
.360Ø
Tools Recommended
.180Ø
.270Ø
.520
Plug 2 Hole Flange Float Mount
to 0.141 Cable
1
84
REF. PLANE
L096-A99-10
Assembly Procedure
R/P
#2 - 56 UNC - 2B
2 PL.
H096-A99-01
1
R/P
.229
.247
(.217 MATED)
AP18-002
Catalog Number
H016-R11-02
.565
.425
.050
.335
VSWR (TYP)
.375
ACROSS
FLATS
2 PL.
.053
1.20:1 to 23 GHz
.100
Tools Recommended
A096-A99-09
L096-A99-10
.316Ø
Assembly Procedure
AP18-002
.180Ø
.145 Ø
.450Ø
2 PL.
Jack Bulkhead
Accepts 0.141 S/R Cable
.290Ø
GMS JACK
INTERFACE
.025
CABLE
SEAT
.090
PANEL
THICKNESS
.375
ACROSS FLATS
2 PL.
Catalog Number
H016-R11-01
.565
.450Ø
2 PL.
VSWR (TYP)
.316Ø
1.20:1 to 23 GHz
.180Ø
Tools Recommended
A096-A99-09
GMS JACK
INTERFACE
L096-A99-10
FOR .093
PANEL
.425
Assembly Procedure
1
AP18-002
REF. PLANE
R/P
Jack Bulkhead
to 0.141 S/R Cable
R/P
.445
1
.825
Catalog Number
H018-K32-01
.255
#2-56 UNC-2B
THRU 2 PL.
.018
.080
.270Ø
.125
.159Ø
.195Ø
.520
.252
.360
2 PL.
GMS PLUG
INTERFACE
.650Ø
ACCEPTS
160 CABLE
TIMES MICROWAVE
Plug Float Mount Accepts
160 Cable
.228
AT REST
R/P
85
Catalog Number
H019-K32-01
.255
.095
.091
PANEL
.083
.077
.473Ø
1
.323
.270Ø
.284
.420
.252
Plug R/A Mount Accepts
160S Cable
GMS PLUG
INTERFACE
R/P
.256
SNAP PLUG
ACCEPTS SEMFLEX
160S CABLE
.402Ø
OUTER SHELL
CAPTIVATING
RIDGE
Catalog Number
H018-K12-01
Assembly Procedure
AP18-015
1.420
PTFE
RETAINING
SLEEVE
.796
.276Ø
.274Ø
.159Ø
.157Ø
Size 5 Plug for 160 Cable
GMS PLUG
INTERFACE
GMS OUTER SHELL
FRONT DIELECTRIC
Catalog Number
H018-K12-02
1.406
1.404
Assembly Procedure
.568
.566
AP18-012
.229Ø
.227Ø
.159Ø
.157Ø
GMS PLUG
INTERFACE
1.220
17/32
.255Ø
.253Ø
.276Ø
.274Ø
7/32Ø
Size 5 Plug to 160 Cable
SPRING
86
.796
GMS OUTER SHELL
1.349
Catalog Number
H014-K11-01
Assembly Procedure
.350
GMS JACK
INTERFACE
.159Ø
.187Ø
AP18-011
.477
1.052
.143
.100Ø
.050Ø
CONTACT
.065
CENTERING
DIELECTRIC
.125
Size 5 Jack to 160 Cable
REAR DIELECTRIC
.104Ø
.195Ø
FERRULE
1.349
Catalog Number
H014-K11-02
Assembly Procedure
.350
GMS JACK
INTERFACE
.159Ø
.187Ø
AP18-011
.477
1.052
.143
.100Ø
.050Ø
CONTACT
.065
CENTER
DIELECTRIC
.125
Size 5 Jack to 160 Cable
REAR DIELECTRIC
.104Ø
195Ø
FERRULE
Catalog Number
W014-K11-01
.725
.248
ACROSS
FLATS
.171
.147
.062Ø
THRU
2 WALLS
Assembly Procedure
.232Ø
AP18-014
.192Ø
5/16-32 UNEF-2A THD.
ACCEPTS STORM
.180 S/R MP CABLE
.088
CONTACT
HIgh Power Plug Straight
to 0.180 S/R MP
CONTACT
.008
.000
DIELECTRIC
DIELECTRIC
87
Catalog Number
H015-K12-01
.105
Assembly Procedure
.500
AP18-016
.248
.350Ø
.148
.232Ø
.192Ø
.060Ø
(.537)
+.008
+.000
DIELECTRIC
High Power Plug R/A
to 0.180 S/R MP Cable
.389
_
+
R/P
.219Ø
ACCEPTS STORM
.180 S/R MP CABLE
DIELECTRIC
STOP/GUIDE
.158Ø
Catalog Number
1890-023-1
.890
.462
+.002
Ø.274 -.003
.430
.300
Ø.219
MAX.
Ø.186
ACCEPTS STORM
421-1001-001
FLEX CABLE
Ø.218
Size 8 Contact with Female Interface
for 421-1001-001 Flex Cable
GMS JACK
INTERFACE
Ø.314 +.002
-.003
.573
.725
R/P
CABLE STOP
Catalog Number
1890-025-1
.060Ø THRU (1) SIDE 2 PL.
.462
Ø.274 +.002
-.003
.430
.165Ø
.300
.215Ø
Ø.186
.197Ø
ACCEPTS STORM
421-010
FLEX CABLE
Ø.218
Ø.314 +.002
-.003
GMS JACK
INTERFACE
Size 8 Contact with Female Interface
for 421-010 Flex Cable
.573
.725
R/P
88
CABLE STOP
Catalog Number
1890-024-1
.867
.625
Assembly Procedure
.033
.029
AP01-143
Ø
RETAINING RING
.288
.284
Ø.143
+.002
Ø.314 -.001
GMS PLUG
INTERFACE
Size 8 Contact with Male Interface
for 421-1006-001 Flex Cable
+.002
Ø.274 -.001
.593
.703
CABLE STOP
.995
R/P
.867
Catalog Number
1890-022-1
.631
.619
.033
.029
RETAINING
RING
Ø.135
GMS PLUG
INTERFACE
+.002
Ø.314 -.001
.288
Ø .284
+.002
Ø.274 -.003
.600
Size 8 Contact with Male Interface
for 423-0004-002 S/R Cable
.703
CABLE STOP
.788
R/P
Catalog Number
H018-K92-01
ACCEPTS WESTINGHOUSE
CABLE #582R211Y01
.824
Tools Recommended
.255
A096-A99-09
27°
4 PL.
.083
.077
L096-A99-10
Assembly Procedure
AP02-025
.650Ø
.360Ø
.16Ø
.520
.270Ø
Plug Float Mount Accepts Flex Cable
.252
R/P
.247
AT
REST
#2-56 UNC-2B THD.
2 PL.
89
Catalog Number
H016-K11-01
Tools Recommended
A096-A99-09
L096-A99-10
Jack Bulkhead Mount
Accepts 582R211Y01 Flex Cable
Catalog Number
H019-K32-02
.255
FOR .095-.091
THICK PANEL
.315
.083
.077
SNAP
RING
.256
.259
AT REST
.32 SPRING
LOADED
TRAVEL
.270Ø
.284
.420
Plug Float Mount R/A Accepts
120S Cable
.250
GMS PLUG
INTERFACE
R/P
.420Ø
ACCEPTS SEMFLEX
120S CABLE
.472Ø
Catalog Number
H018-K92-02
Assembly Procedure
AP18-007
.256
.254
.315
.150
.472Ø
FOR
.150
PANEL
SNAP RING
.125
Plug Snap Mount to 18 GA
Wire D.C. Only, 0.150 Panel Mount
.270Ø
GMS PLUG
INTERFACE
.250
90
DIELECTRIC
.141
R/P
.403Ø
.401Ø
SOLDER POT FOR 18
GAGE WIRE (D.C. ONLY)
GMS Loads
Catalog Number
H055-A12-01
.829
.255
27°
4 PL.
.090
VSWR (TYP)
1.15:1 to 18 GHz
.317
1.35:1 to 23 GHz
.520
.270Ø
.360Ø
.252
GMS PLUG
INTERFACE
.260
.152 ACROSS
FLATS
R/P
.650Ø
Plug 50 Ohm Load
Float Mount
.360Ø
#2-56 UNC-2B THD.
THRU 2 PL.
Catalog Number
H055-A11-01
.050
.425
.375
ACROSS
FLATS 2 PL.
GMS JACK
INTERFACE
.090
PANEL
THICKNESS
.220
.100
.450Ø
.290Ø
.450Ø
.316Ø
Jack 50 Ohm Load Bulkhead
.250Ø
.152
ACROSS
FLATS
91
GMS ESD Flange Mounts
Catalog Number
H001-M11-02
H001-M11-03 (Contains Internal Gasket)
.331
.060
18°
4 PL.
.007
.003
GMS ESD
JACK
INTERFACE
.087
.316Ø
3 PL.
.106Ø
.625Ø
(.008)
.480
.343Ø
.295Ø
.240
.10*
to Tab Terminal
.055
MIN.
R/P
.135
.103Ø 2 PL.
ESD CONNECTOR
INDENTIFICATION
GROOVES
.320
.009
.007
.019Ø
.017Ø
.033Ø
.032Ø
PIN DETAIL
Catalog Number
H001-N11-04
H001-N11-05 (Contains Internal Gasket)
.331
.060
18°
4 PL.
.007
.003
GMS ESD
JACK
INTERFACE
.087
.625Ø
Accepts 0.015 C/C
.316Ø
3 PL.
.343Ø
.480
.180Ø
.295Ø
.240
.055
MIN.
.103Ø 2 PL.
R/P
ESD CONNECTOR
INDENTIFICATION
GROOVES
92
GMS ESD Cable Connectors
Catalog Number
H014-B31-01
.579
.270
18°
4 PL.
.065
O-RING
VSWR (TYP)
.625Ø
.087
1.35:1 to 15 GHz
1.40:1 to 23 GHz
.199Ø
.156Ø
.075Ø
Tools Recommended
A096-A99-09
A096-A99-02
.343Ø
.480
.285Ø
Assembly Procedure
AP18-022
GMS ESD
JACK
INTERFACE
.316Ø
.055
MIN
R/P
Jack 2 Hole Flange Mount Rotator
to 0.047 S/R Cable
.177
.103Ø 2 PL.
CABLE STOP
.242
Catalog Number
H014-D11-04
H014-D11-05 (Contains Internal O-Ring)
.240
ACCEPTS
.047 S/R
CABLE
.579
18°
4 PL.
.335
.103Ø
2 PL.
.087
.065
Tools Recommended
ESD CONNECTOR
IDENTIFICATION
GROOVES
A096-A99-09
.625Ø
L096-A99-01
Assembly Procedure
.343Ø
AP18-001
.120Ø
.480
.240
GMS ESD JACK
INTERFACE
.285Ø
.055 MIN.
.199Ø
R/P
Catalog Number
H018-D32-07
H018-D32-06
Tools Recommended
Rotator to 0.086 S/R Cable
ACCEPTS .086
S/R CABLE
.316Ø
.682
A
0.090
0.080
.255
29°
25°
4 PL.
.093
.087
.317
ESD CONNECTOR
IDENTIFICATION
GROOVES
.120Ø
H096-A99-01
L096-A99-01
.360Ø
.270Ø
.520
.650Ø
.260
Assembly Procedure
AP18-001
GMS ESD PLUG
INTERFACE
.117
MAX
.252
R/P
ACCEPTS
.086 S/R
CABLE
.360Ø
#2-56 UNC-2B
THD. 2 PL.
Plug 2 Hole Float Mount
to 0.086 S/R Cable
93
GMS ESD Cable Connectors
Catalog Number
H018-R32-02
Tools Recommended
H096-A99-01
L096-A99-10
.681
.255
29°
25°
4 PL.
.083
.077
.317
ESD CONNECTOR
IDENTIFICATION
GROOVES
.359Ø
.180Ø
.270Ø
.520
.360Ø
Plug 2 Hole Float Mount
to 0.141 S/R Cable
GMS ESD
PLUG
INTERFACE
.117 MAX.
.260
ACCEPTS .141
S/R CABLE
.650Ø
.252
#2-56 UNC-2B
THD. 2 PL.
R/P
GMS ESD Load
Catalog Number
H055-A32-02
.650
.360Ø
.255
27°
4 PL.
.083
.077
.315
Plug 50 Ohm Load
2 Hole Flange Mount
.650Ø
.520
.270Ø
.260
GMS ESD
PLUG
INTERFACE
94
.255
.249
.361Ø
.355Ø
R/P
SGMS Flange Mounts
Catalog Number
1811-400-3
1811-401-3
SB
LD
.480
.083
.077
.500
SQ.
.008
.004
.340
2 PL.
.625Ø
.106Ø
.008
.270Ø
Plug 4 Hole Flange Mount
Tab Terminal
182Ø
SGMS PLUG
SMOOTH BORE
INTERFACE
.100
.103Ø
THRU
4 PL.
.135
.275
.271
R/P
Catalog Number
P001-M35-01
.170
2 PL.
.773
.250
R/P
.529
.030
.100
.329
.008
.125
.158Ø
.241
.481
.220Ø
.154
.731
Tab Terminal
.073Ø THRU
.068Ø
.125Ø CSK X 100°
2 PL.
SGMS PLUG
SMOOTH BORE
INTERFACE
.063
.037
.200
.131Ø
.126Ø
THRU 2 PL.
95
SGMS Thread-In Shrouds
Catalog Number
6804-100-2
.038
.334
.100
WRENCH
FLATS
.065
.004
.000
.092
.037Ø
.035Ø
.121Ø
.118Ø
Plug Limited Detent High Average
Power Thread-in to Terminal
SGMS PLUG
LIMITED
INTERFACE
.250
ACROSS
FLATS
.098
THDS.
.075
.130
.124
R/P
1/4-36 UNS-2A THD.
.202
.305
PIN
Catalog Number
P003-L35-01
Plug Smooth Bore Thread-in
with 0.018 C/C
96
SGMS Cable Connectors
Catalog Number
6804-100-3
.518
5/16-48 UNS - 2A THD.
.375
ACROSS
FLATS
.202
.236
.060
.275Ø
.201Ø
.460Ø
1
.375Ø
.371Ø
SGMS PLUG
LIMITED DETENT
INTERFACE
.170Ø
.313 ACROSS FLATS
2
.075
R/P
.283
.053Ø
Catalog Number
P001-K94-01
P001-K95-01
.046
.040
Plug Limited Detent High
Average Power Mount
to 0.141 S/R Cable
.046
.040
LD
SB
Plug 2-Hole Flange Mount
for 120 Cable
97
SGMS Cable Connectors
Catalog Number
P016-K94-01
P016-K95-01
for HP120 Cable
SGMS Blindmate Interconnect
Catalog Number
1881-001-1
.441
.439
.170
BOTH
ENDS
.130
BOTH
ENDS
.186Ø
BOTH
ENDS
SGMS FEMALE
INTERFACE
BOTH ENDS
.202Ø
.200Ø
98
LD
SB
GPO Multiposition Blocks
Catalog Number
A033-B93-02-4
GPO Male Full Detent 4-Position Field
Replacement .086 Cable Connector
Catalog Number
A036-P95-01-4
GPO Male Smooth Bore 4-Position
Surface Mount PCB Connector
100
GPO Multiposition Blocks
Catalog Number
A033-D53-01
.073Ø
2 PL.
CABLE SIDE
.030 X 45°
8 PL.
.547
.111Ø
2 PL.
CABLE ADAPTER
FOR .086 CABLE
2 PL.
.351
.264 2 PL.
.078
0-80 UNF - 2B
2 PL.
.085
.210 [5.33]
.169
.247
Male 2-Position Full Detent Connector
for .086 S/R Cable
.703
GPPO Multiposition Blocks
.089Ø
.085Ø
2 PL.
.020
.014
2 PL.
.145
.141
.127
.123
.010
.008
SLOT
2 PL.
Catalog Number
B007-L45-02
FULL RAD. 2 PL.
.0125Ø
.0115Ø
2 PL.
.256
.254
.131
.129
.102Ø
.098Ø
2 PL.
.063
.020
SLOT
2 PL.
GPPO MALE
SMOOTH BORE
INTERFACE, 2 PL.
.030
.010 X 45° 4 PL.
Male 2-Position Smooth Bore
Mounting Block
.012
.008
2 PL.
R/P
.145
.141
.08
.04
.061
.059
2 PL.
.020
.014
2 PL.
.010 SLOT 2 PL.
.008
PRE-TIN
PER MPS-160
Catalog Number
B007-L45-02-T
.127
.123
.012Ø
2 PL.
.255
.130
.100Ø
2 PL.
.063
.020
SLOT
2 PL.
FULL RAD. 2 PL.
GPPO MALE
SMOOTH BORE
INTERFACE, 2 PL.
R/P
.060
2 PL.
.012
.008
2 PL.
.020 X 45° 4 PL.
Mounting Block, Pre-Tinned
101
"A" +/-.003 2 PL. *
.145
.141
.010
.008
SLOT
2 PL.
Catalog Number
B007-L45-04-TAB
.127
.123
FULL RAD. 2 PL.
.012Ø
2 PL.
.255
.130
.100Ø
2 PL.
.063
GPPO MALE
SMOOTH BORE
INTERFACE, 2 PL.
Mounting Block
.060
2 PL.
R/P
.020 X 45° 4 PL.
.012
.008
2 PL.
.020
SLOT
2 PL.
Catalog Number
B031-B93-01-4
.560
B
.420
B
GPPO MALE
FULL DETENT
INTERFACE, 4 PL.
.210
.530
Ø.010
.070
.100
A B C
.175
C
C
.100
BOTTOM
VIEW
.116Ø THRU
.170Ø
.050
2 PL.
CABLE
ADAPTER
CLAMP
NUT
Ø.010
B
A B C
C
.050 MAX
ALLOWANCE FOR
CLAMP NUT
.560
.420
.200
.210
.250
.070
.250
R/P
.175
A
.090
A
.630
Male 4-Position Full Detent R/A
to Storm 0.047 Flex Cable
102
.083
4 PL.
Catalog Number
B031-B93-01-6
GPPO MALE
FULL DETENT
INTERFACE, 6 PL.
Ø.010
A B C
.820
B
.680
BOTTOM
VIEW
.515
.375
B
.750
.210
.140
.070
.175
C
C
.100
CLAMP
NUT
.116Ø THRU
.170Ø
.050
2 PL.
A B C
Ø.010
CABLE
ADAPTER
.820
C
.680
.050 MAX
ALLOWANCE FOR
CLAMP NUT
.515
.375
.200
.210
.250
.070
.250
R/P
.175
A
A
.090
.890
.083
6 PL.
Catalog Number
B031-B93-02-4
.050 MAX
ALLOWANCE FOR
CLAMP NUT
.690
.550
.410
.250
270
.050
2 PL.
.250
.175
R/P
.083
4 PL.
.200
2 PL.
GPPO MALE
FULL DETENT
INTERFACE, 4 PL.
.960
CLAMP
NUT
CABLE
ADAPTER
.860
.075
.110Ø THRU 2 PL.
.075
103
Catalog Number
B031-B93-03-4
.590
.050 MAX
ALLOWANCE FOR
CLAMP NUTS
.185
.100
.250
R/P
.175
.083
4 PL.
.100
.960
.250
CLAMP NUT
CABLE ADAPTER
.105Ø THRU 2 PL.
.075
.100
.270
.410
.550
.690
.885
104
Catalog Number
B010-A95-13
GPPO Smooth Bore
Dual Shroud Block
Catalog Number
B011-A93-01
GPPO Male Full Detent
Dual Block R/A to
.086 Hand Formable Cable
105
Catalog Number
B008-L13-05
3-Position Straight GPPO
Male Full Detent PWB Block Assembly
Catalog Number
B030-L93-02-7
B030-L95-02-7
7-Position GPPO Male R/A PWB
Block Assembly
106
G3PO Multiposition Blocks
Catalog Number
R007-T43-01
R007-T45-01
FD
SB
Male 6-Position
Mounting Block
Catalog Number
R012-T93-02
Catalog Number
R012-T95-03
Male Smooth Bore 16-Position
Mounting Block
107
G3PO Multiposition Blocks
Catalog Number
R036-T45-01
G3PO Male Smooth Bore
9-Position Mounting Block
Catalog Number
R036-T45-02
Short Interface Male Smooth Bore
5-Position Mounting Block
50 OHM with 100 OHM Washout
108
SGMS Multiposition Blocks
Catalog Number
P031-G94-02-2
SGMS Plug Limited Detent
2-Gang R/A Block to RD-316
Catalog Number
P032-L95-01-2
SGMS Plug Smooth Bore
2-Gang Straight PCB
109
NOTES
110
GPO Within Series Adapters
Catalog Number
A1A3-0503-01
A1A4-0503-01
A1A5-0503-01
FD
LD
SB
VSWR (TYP)
1.20:1 to 18 GHz, 1.30:1 to 26.5 GHz
GPO Female to
GPO Male
Catalog Number
0119-632-3
VSWR (TYP)
1.15:1 to 18 GHz,1.25:1 to 26.5 GHz
GPO Male CM to
GPO Male FD Thread-in
Catalog Number
A3A6-0539-01
A3A3-0539-01
FD-CM
FD-FD
VSWR (TYP)
1.15:1 to 18 GHz, 1.25:1 to 26.5 GHz
GPO Male to
GPO Male Thread-in
112
GPO Within Series Adapters
Catalog Number
0119-843-3
VSWR (TYP)
1.15:1 to 18 GHz, 1.30:1 to 26.5 GHz
GPO Male FD to
GPO Male FD Feed-thru
Catalog Number
0119-783-1
VSWR (TYP)
1.15:1 to 18 GHz, 1.30:1 to 26.5 GHz
GPO Male FD to
GPO Male FD Thread-in
Hermetic Feed-thru
Catalog Number
0119-502-3
VSWR (TYP)
1.10:1 to 18 GHz, 1.20:1 to 26.5 GHz
GPO Male FD to
GPO Male CM Thread-in
113
GPO Between Series Adapters
Catalog Number
1A3F1-0503-01
1A4F1-0503-01
1A5F1-0503-01
FD
LD
SB
VSWR (TYP)
1.10:1 to 18 GHz, 1.35:1 to 26.5 GHz
GPO Male to SMA Jack
Catalog Number
1A3F1-0523-01
1A4F1-0523-01
1A5F1-0523-01
FD
LD
SB
VSWR (TYP)
1.20:1 to 18 GHz, 1.30:1 to 26.5 GHz
GPO Male to SMA Jack Thread-in
Catalog Number
1A3F1-0523-02
1A4F1-0523-02
FD
LD
VSWR (TYP)
1.10:1 to 18 GHz, 1.20:1 to 26.5 GHz
114
Catalog Number
1A3F1-0523-05
1A5F1-0523-05
FD
SB
VSWR (TYP)
1.10:1 to 18 GHz, 1.20:1 to 26.5 GHz
Catalog Number
1A3F1-0513-03
1A4F1-0513-03
1A5F1-0513-03
FD
LD
SB
VSWR (TYP)
1.10:1 to 18 GHz, 1.20:1 to 26.5 GHz
GPO Male to
SMA Jack 2-Hole Flange Mount
Catalog Number
1A3F1-0513-05
1A4F1-0513-05
1A5F1-0513-05
FD
LD
SB
VSWR (TYP)
1.10:1 to 18 GHz, 1.20:1 to 26.5 GHz
GPO Male to
115
Catalog Number
00219-125-3
VSWR (TYP)
1.10:1 to 18 GHz, 1.20:1 to 23 GHz
GPO Male FD to
SMA Jack 2-Hole w/O-Ring
Catalog Number
00219-128-3
VSWR (TYP)
1.10:1 to 18 GHz, 1.20:1 to 26.5 GHz
GPO Male LD to
Catalog Number
1A6F1-0513-02
VSWR (TYP)
1.10:1 to 18 GHz, 1.20:1 to 26.5 GHz
GPO Male SB CM to
116
Catalog Number
00219-142-3-V10
VSWR (TYP)
1.10:1 to 18 GHz, 1.20:1 to 26.5 GHz
GPO Male FD to
Catalog Number
1A3F1-0513-02
1A5F1-0513-02
FD
SB
VSWR (TYP)
1.10:1 to 18 GHz, 1.20:1 to 26.5 GHz
GPO Male to
Catalog Number
1A3F1-0513-04
VSWR (TYP)
1.10:1 to 18 GHz, 1.20:1 to 26.5 GHz
GPO Male FD to
117
Catalog Number
1A1F1-0503-01
VSWR (TYP)
1.15:1 to 15 GHz, 1.45:1 to 26.5 GHz
GPO Female to SMA Jack
Catalog Number
00219-106-3
VSWR (TYP)
1.15:1 to 18 GHz, 1.25:1 to 26.5 GHz
GPO Female
to SMA Jack w/EMI Gasket
Catalog Number
1A3F2-0503-01
1A4F2-0503-01
1A5F2-0503-01
FD
LD
SB
VSWR (TYP)
1.15:1 to 18 GHz, 1.25:1 to 26.5 GHz
GPO Male to SMA Plug
118
Catalog Number
1A1F2-0503-01
VSWR (TYP)
1.15:1 to 18.GHz, 1.25:1 to 26.5 GHz
GPO Female to SMA Plug
Catalog Number
1A1C2-0521-01
VSWR (TYP)
1.10:1 to 18 GHz, 1.20:1 to 26.5 GHz
GPO Female to 2.4mm Plug
Catalog Number
1A3C1-0503-01
VSWR (TYP)
1.20:1 to 26.5 GHz
GPO Male FD to 2.4mm Jack
119
Catalog Number
1A1D1-0501-01
VSWR (TYP)
1.20 to 26.5 GHz
GPO Female to 2.92mm Jack
Catalog Number
1A1D2-0501-01
VSWR (TYP)
1.10:1 to 18 GHz, 1.25:1 to 26.5 GHz
Catalog Number
1A3D1-0503-01
1A4D1-0503-01
1A5D1-0503-01
VSWR (TYP)
1.20:1 to 26.5 GHz
GPO to 2.92mm Jack
120
FD
LD
SB
Catalog Number
1A3D1-0513-01
1A4D1-0513-01
1A5D1-0513-01
FD
LD
SB
VSWR (TYP)
1.20:1 to 26.5 GHz
GPO Male to
2.92mm Jack 2-Hole Flange Mount
Catalog Number
03501-210-1
VSWR (TYP)
1.15:1 to 18 GHz, 1.30:1 to 26.5 GHz
Catalog Number
1A3G1-0533-01
VSWR (TYP)
1.20:1 to 18 GHz, 1.35:1 to 26.5 GHz
GPO Male FD to SSMA
Jack Thread-in Bulkhead
121
Catalog Number
00119-117-3
VSWR (TYP)
1.20:1 to 18 GHz, 1.35:1 to 26.5 GHz
GPO Male FD to SSMA Jack Thread-in
Catalog Number
00119-011-3
VSWR (TYP)
1.25:1 to 18 GHz
GPO Male FD 4-Hole Flange Mount to
SSMA Jack RA
Catalog Number
00419-302-3
VSWR (TYP)
1.04+.02F(GHz):1 to 18 GHz
GPO Male FD to TNC Jack
Catalog Number
00419-303-3
VSWR (TYP)
1.04+.02F(GHz):1 to 18 GHz
GPO Male FD to
TNC Jack Bulkhead
122
GPPO Within Series Adapters
Catalog Number
B3B3-0523-01
B5B3-0523-01
FD-FD
SB-FD
VSWR (TYP)
1.20:1 to 26.5 GHz, 1.30:1 to 40 GHz
GPPO Male to GPPO Male Thread-in
Catalog Number
B3B3-0523-02
B3B5-0523-02
B5B3-0523-02
B5B5-0523-02
A B
FD-FD
FD-SB
SB-FD
SB-SB
VSWR (TYP)
1.20:1 to 26.5 GHz, 1.30:1 to 40 GHz
GPPO Male to GPPO Male Thread-in
GPPO Between Series Adapters
Catalog Number
1B1A3-0541-01
VSWR (TYP)
1.20:1 to 26.5 GHz, 1.30:1 to 40 GHz
GPPO Female Snap-in
Bulkhead Mount to GPO Male FD
123
Catalog Number
1B1F1-0503-01
VSWR (TYP)
1.15:1 to 12 GHz, 1.30:1 to 26.5 GHz
GPPO Female to SMA Jack
Catalog Number
1B1F2-0503-01
VSWR (TYP)
1.20:1 to 26.5 GHz
GPPO Female to SMA Plug
Catalog Number
1B3F1-0503-01
1B5F1-0503-01
FD
SB
VSWR (TYP)
1.10:1 to 12 GHz, 1.20:1 to 26.5 GHz
GPPO Male to SMA Jack
124
Catalog Number
1B3F2-0503-01
1B5F2-0503-01
FD
SB
VSWR (TYP)
1.15:1 to 18 GHz, 1.25:1 to 26.5 GHz.
GPPO Male to SMA Plug
Catalog Number
1B1C1-0501-01
VSWR (TYP)
1.10:1 to 18 GHz, 1.20:1 to 40 GHz
GPPO Female to 2.4mm Jack
Catalog Number
1B1C2-0501-01
VSWR (TYP)
1.20:1 to 26.5 GHz, 1.30:1 to 40 GHz
GPPO Female to 2.4mm Plug
125
Catalog Number
1B3C2-0503-01
1B5C2-0503-01
FD
SB
VSWR (TYP)
1.20:1 to 26.5 GHz, 1.30:1 to 40 GHz
GPPO Male to 2.4mm Plug
Catalog Number
1B3C1-0503-01
1B5C1-0503-01
FD
SB
VSWR (TYP)
1.20:1 to 26.5 GHz, 1.30:1 to 40 GHz
GPPO Male to 2.4mm Jack
Catalog Number
1B1M1-0509-01
VSWR (TYP)
1.20:1 to 26.5 GHz, 1.35:1 to 50 GHz
GPPO Female to 1.85mm Jack
126
Catalog Number
1B1M2-0509-01
VSWR (TYP)
1.20:1 to 26.5 GHz, 1.40:1 to 50 GHz
GPPO Female to 1.85mm Plug
Catalog Number
1B3M1-0509-01
1B5M1-0509-01
FD
SB
VSWR (TYP)
1.20:1 to 26.5 GHz, 1.40:1 to 50 GHz
GPPO Male to 1.85mm Jack
Catalog Number
1B3M2-0509-01
1B5M2-0509-01
FD
SB
VSWR (TYP)
1.20:1 to 26.5 GHz, 1.40:1 to 50 GHz
GPPO Male to 1.85mm Plug
127
G3PO Adapters
Catalog Number
1R3M1-0509-01
1R5M1-0509-01
FD
SB
VSWR (TYP)
1.20:1 to 26.5 GHz, 1.30:1 to 65 GHz
G3PO to 1.85mm Jack
Catalog Number
1R3F1-0509-01
1R5F1-0509-01
FD
SB
VSWR (TYP)
1.20:1 to 18 GHz, 1.30:1 to 26 GHz
G3PO Male to SMA Jack
GMS Adapters
Catalog Number
00218-103-3
VSWR (TYP)
1.20:1 to 18 GHz, 1.30:1 to 23 GHz
GMS Jack to SMA Jack
128
GMS Adapters
Catalog Number
1F1H2-0503-01
VSWR (TYP)
1.10:1 to 18 GHz, 1.20:1 to 23 GHz
GMS Plug to SMA Jack
Catalog Number
00218-301-3
VSWR (TYP)
1.20:1 to 18 GHz, 1.30:1 to 23 GHz
Catalog Number
1F1H1-0501-01
VSWR (TYP)
1.20:1 to 18 GHz, 1.30:1 to 23 GHz
129
GMS Adapters
Catalog Number
00218-101-3
VSWR (TYP)
1.20:1 to 18 GHz, 1.30:1 to 23 GHz
Catalog Number
1F2H1-0501-01
VSWR (TYP)
1.20:1 to 23 GHz
GMS Jack to SMA Plug
Catalog Number
1F2H2-0503-01
VSWR (TYP)
1.20:1 to 18 GHz, 1.30:1 to 23 GHz
GMS Plug to SMA Plug
130
GMS Adapters
Catalog Number
00218-201-3
VSWR (TYP)
1.20:1 to 18 GHz, 1.30:1 to 23 GHz
Catalog Number
00218-104-3
VSWR (TYP)
1.20:1 to 18 GHz, 1.30:1 to 23 GHz
Bulkhead Mount Adapter
Catalog Number
00218-202-3
VSWR (TYP)
1.20:1 to 18 GHz, 1.30:1 to 23 GHz
Bulkhead Mount Adapter
131
GMS Adapters
Catalog Number
1A3H1-0521-01
1A4H1-0521-01
1A5H1-0521-01
FD
LD
SB
VSWR (TYP)
1.10:1 to 12 GHz, 1.20:1 to 23 GHz
GMS Jack Thread Mount to
GPO Male Adapter
Catalog Number
1F1H2-0513-01
VSWR (TYP)
1.20:1 to 23 GHz
2 Hole Flange Mount
Catalog Number
1A3H1-0511-02
1A4H1-0511-02
1A5H1-0511-02
VSWR (TYP)
1.15:1 to 23 GHz
GMS Jack 2 Hole Flange Mount
to GPO Male Adapter
132
FD
LD
SB
GMS Adapters
Catalog Number
1A3H1-0511-01
VSWR (TYP)
1.20:1 to 23 GHz
GMS Jack 2-Hole Flange Mount
to GPO Male FD Adapter
Catalog Number
1A3H2-0533-01
VSWR (TYP)
1.20:1 to 18 GHz, 1.30:1 to 23 GHz
GMS Plug to GPO Male FD
Snap-in Float Mount
Catalog Number
00118-119-3-LD
VSWR (TYP)
1.20:1 to 18 GHz, 1.30:1 to 23 GHz
GMS Jack to GPO Male LD
Bulkhead Mount
133
GMS ESD Adapters
Catalog Number
02018-318-3
VSWR (TYP)
1.20:1 to 18 GHz, 1.30:1 to 23 GHz
GMS ESD Male Plug to SMA Jack
Catalog Number
02018-317-3
VSWR (TYP)
1.20:1 to 18 GHz, 1.30:1 to 23 GHz
GMS ESD Jack to SMA Plug
Catalog Number
02018-316-3
VSWR (TYP)
1.20:1 to 18 GHz, 1.30:1 to 23 GHz
GMS ESD Plug to SMA Plug
134
GMS ESD Adapters
Catalog Number
02018-315-3
VSWR (TYP)
1.20:1 to 18 GHz, 1.30:1 to 23 GHz
GMS ESD Plug Float Mount
to SMA Jack
Catalog Number
02018-320-4
VSWR (TYP)
1.20:1 to 18 GHz, 1.30:1 to 23 GHz
GMS ESD Jack 2-Hole Flange Mount
to GPO Male FD
135
NOTES
136
GPO Tools
Catalog Number
A090-A99-01
GPO Seal Locating Tool
for Thread-in Shroud
Catalog Number
A090-A99-03
GPO Shroud Centering Tool
for .015 C/C
Catalog Number
A090-A99-07
GPO Seal Locating Tool
Catalog Number
A090-A99-09
Flange Seal Locator Tool
for .481 Hole
138
GPO Tools
Catalog Number
A090-A99-10
for .282 Hole
Catalog Number
A090-A99-11
for .328 Hole
Catalog Number
A096-A99-01
GPO Contact Retaining Tool
Catalog Number
A096-A99-02
GPO Contact Locating Tool
139
GPO Tools
Catalog Number
A096-A99-04
GPO Contact Locating Tool
Catalog Number
A096-A99-06
GPO Female Locator Tool
Catalog Number
A096-A99-07
GPO R/A Locator Tool
for Round Housing
Catalog Number
A096-A99-08
for Square Housing
140
GPO Tools
Catalog Number
A096-A99-09
Catalog Number
A098-A99-04
GPO Female R/A Installation Tool
Catalog Number
A095-A99-03*
* Additional alternate tips available
for use with this tool:
A099-A99-02-395
(for A1A1-001-14 Bullet)
A099-A99-02-485
(for A1A1-001-10 Bullet)
GPO Low Impact BMI Removal Tool
Catalog Number
A098-A98-08
GPO Low Impact Cable Connector
Removal Tool
141
GPO Tools
Catalog Number
A093-A99-01
GPO Low Impact Load Removal Tool
Catalog Number
A098-A99-01
GPO R/A Removal Tool
Catalog Number
A098-A99-02
Installation/Withdrawal Tool
(GPO R/A and Cable)
Catalog Number
A098-A99-03
GPO Pry Bar Removal Tool
142
GPO Tools
Catalog Number
A098-A99-05
GPO Snap-in Float Mount
Removal Tool
Catalog Number
A098-A99-10
GPO Straight Cable Connector
Removal Tool
GPPO Tools
Catalog Number
B090-A99-05
GPPO Seal Locator Tool
Catalog Number
B096-A93-01
GPPO Contact Retaining Tool
143
GPPO Tools
Catalog Number
B096-A99-01
B096-A99-02
FD
SB
GPPO Locator Tool
Catalog Number
B098-A99-01
GPPO Female R/A Installation Tool
Catalog Number
B098-A99-02
GPPO 30° Removal Tool
Catalog Number
B098-A99-03
GPPO Removal Tool
144
GPPO Tools
Catalog Number
B090-A99-06
GPPO Seal Locator Tool
for Press-in Shroud
Catalog Number
B090-A99-07
Seal Locator Tool
Catalog Number
B095-A99-05
GPPO No Impact BMI Removal Tool
Catalog Number
B098-A99-08
GPPO Straight Cable Connector
Removal Tool
145
GPPO Tools
Catalog Number
B098-A99-07
GPPO Cable Connector
Removal Tool
Catalog Number
9001-823-0*
* For use with part
number 0118-928-4
GPPO Male Snap-in
Removal Tool
Catalog Number
9001-824-0*
* For use with part
numbers 0118-958-1
and B016-B11-01
GPPO Female Snap-in
Removal Tool
G3PO Tools
Catalog Number
R095-A99-01
G3PO BMI Install/Removal Tool
146
G3PO Tools
Catalog Number
R098-A99-01
Product Name
GMS Tools
Catalog Number
H098-A99-01
GMS Removal Tool
Catalog Number
H096-A99-01
GMS Male Locator Tool
Catalog Number
A096-A99-09
Housing Locator Tool
147
Miscellaneous Tools
Catalog Number
L096-A99-01
L096-A99-02
.086
.047
Cable Holding Fixture
for semi-rigid Cable
Catalog Number
L096-A99-10
Cable Holding Fixture
for .141 Cable
Catalog Number
L096-A99-03
L096-A99-04
Shim Gauge
148
Appendix
Cable Assemblies
In addition to providing our worldwide customers with superior connectors and components, at Corning Gilbert, we also
offer cable assemblies as an integrated, value-added service. Our goal is to provide our customers with the shortest lead
time and lowest priced solution for cabled Corning Gilbert connectors. To accomplish this, we:
•
•
•
•
Specialize in single plane, semi-rigid and flexible
commercial and military test application cable
assemblies.
Make custom test inspection document available
upon the customer’s request.
Provide excellent lead times.
Help you find the right connector for your system
by granting access to customized point-to-point
solutions.
Please see the list below for all available Corning Gilbert connectors and its associated cable types.
Corning Gilbert
Connector Type
GPO
GPPO
G3PO
SMA
GMS
TNC
BNC
N
F
SMB
MCX
MMCX
150
Cable Types
RG-178, RG-316, .086 Semi Rigid,
Storm Products 120 and 421-720
.047 and .086 Semi Rigid,
Storm Products 421-721
.047 Semi Rigid and .058 Flex
RG-316, .047, .086 and .141 Semi
Rigid, Storm Products 120 and
421-1110
.086 and .141 Semi Rigid
.086, and .141 Semi Rigid,
Belden 9292
RG-59, HEC 59
RG-59, RG-6, RG-11, RG-8,
RG-223/224, .086, .141 and
.250 Semi Rigid,
Storm Products 190 and 385
RG-178, RG-179, RG-59, RG-6,
RG-11, HEC 59
RG-316, RG-179
RG-316, RG-179
RG-316, RG-179
Impedance
Frequency Range
50 Ohm
DC to 26.5 GHz
50 Ohm
DC to 65 GHz
50 Ohm
50 Ohm
DC to 65 GHz
DC to 26.5 GHz
50 Ohm
50 and 75 Ohm
DC to 26.5 GHz
DC to 11 GHz
50 and 75 Ohm
50 and 75 Ohm
DC to 4 GHz
DC to 11 GHz
50 and 75 Ohm
DC to 1 GHz is typical,
High Performance types
available to 3 GHz.
DC to 4 GHz
DC to 6 GHz
DC to 6 GHz
50 and 75 Ohm
50 and 75 Ohm
50 and 75 Ohm
Appendix
Test Capabilities
Corning Gilbert’s commitment to quality has made it a leader in the connector industry. Mechanical and electrical quality is verified in every lot of connectors via the internal standard testing procedures. These standard tests include, but are
not limited to:
•
•
•
•
•
•
•
•
•
Visual and Mechanical Inspection
Dielectric Withstanding Voltage
Hermetic Seal
Leakage
Force to Engage/Disengage
Mating Characteristics
Permeability
Insulation Resistance
VSWR
All tests listed above are standard and part of groups A and B testing, per MIL-PRF-39012. As part of our internal test
procedure, ATP-1000, they are free of charge to our customers.
Expanded testing may be obtained by requesting ATP-2000. This test includes all of ATP-1000, as well as 100%
Thermal Shock testing and 100% Visual and Mechanical inspection. Corning Gilbert also has an in-house capability to
perform Salt Spray and Moisture Resistance testing.
Since many Corning Gilbert connectors are utilized in military or aerospace applications, custom Test Inspection
Documents are created on a regular basis for those requiring heightened or special testing. The TIDs verify compliance
to the customers’ requests and/or their submitted SCDs.
Whether you are looking for a commercial, off-the-shelf part or need extensive qualification and acceptance testing,
Corning Gilbert can assure you and your customers that the parts you need are the parts you receive.
151
Appendix
Connector Evaluation Kits
Corning Gilbert offers evaluation kits for the GPO® and GPPO® cable connectors. These kits include everything one
would need for the assembly and trial of our GPO and GPPO connectors.
A099-A99-03 GPO Evaluation Kit Includes:
B099-A99-13 GPPO Evaluation Kit Includes:
4 ea – A014-D11-01 – Female Straight to .086 Cable
4 ea – A015-D11-01 – Female Right Angle to .086 Cable
6 ea – 6” lengths of .086 S/R cable
1 ea – 1A3F1-0503-01 – GPO (m) to SMA (f) adapter
1 ea – 1A3F2-0503-01 – GPO (m) to SMA (m) adapter
1 ea – A096-A99-06 – Straight Locator Tool
1 ea – A096-A99-07 – Right Angle Locator Tool
1 ea – A096-A99-01 - Center Contact Positioning Tool
1 ea – L096-A99-01 – .086 Assembly Fixture
Appropriate Assembly Procedures
4 ea – B014-B11-01 – Female Straight to .047 Cable
4 ea – B015-B11-01 – Female Right Angle to .047 Cable
6 ea – 6” lengths of .047 S/R cable
1 ea – 1B3F1-0503-01 – GPPO (m) to SMA (f) adapter
1 ea – 1B3F2-0503-01 – GPPO (m) to SMA (m) adapter
1 ea – A096-A99-04 – Straight Locator Tool
1 ea – 9001-984-0 – Right Angle Locator Tool
1 ea – B096-A93-01 - Center Contact Positioning Tool
1 ea – L096-A99-02 – .047 Assembly Fixture
Appropriate Assembly Procedures
152
Appendix
Adapter Matrices
The chart listed below is designed to aid in locating the appropriate adapter by application. All adapters can be found on
pages 112 through 135 in this catalog.
NOTE: The "X" in the part numbers below refers to a detent-tabbed item. Replace the "X" with a "3" for a Full Detent,
a "4" for a Limited Detent, or a "5" for a Smooth Bore. Not all detents are available for all adapters.
GPO/GPPO/G3PO Adapters
GPO (M)
GPO (F)
GPPO (M)
GPPO (F)
G3PO (M)
G3PO (F)
1.85mm (M)
1AXM2-0509-01 1A1M2-0509-01 1BXM2-0509-01 1BXM2-0509-01 1RXM2-0509-01 1R1M2-0509-01
1.85mm (F)
1AXM1-0509-01 1A1M1-0509-01 1BXM1-0509-01 1B1M1-0509-01 1RXM1-0509-01 1R1M1-0509-01
2.4mm (M)
1AXC2-0509-01 1A1C2-0521-01 1BXC1-0503-01 1B1C2-0501-01 1RXC2-0503-01 1R1C2-0501-01
2.4mm (F)
1AXD1-0503-01 1A3C1-0503-01 1BXC1-0503-01 1B1C1-0501-01 1RXC1-0503-01 1R1C1-0501-01
1AXD1-0513-00
2.92mm (M)
1AXD2-0503-01 1A1D1-0501-01 1BXD2-0503-01 1B1D2-0501-01 1RXD2-0503-01 1R1D2-0501-01
2.92mm (F)
1AXD2-0503-01 1A1D1-0503-01 1BXD1-0503-01 1B1D1-0503-01 1RXD1-0503-01 1R1D1-0503-01
SMA (M)
1A3F2-0503-01 1A1F2-0503-01 1BXF2-0503-01 1B1F2-0503-01
1RXF2-0503-01 1R1F2-0503-01
SMA (F)
1AXF1-0503-01 1A1F1-0503-01 1BXF1-0503-01 1B1F1-0503-01
1AXF1-0513-03
1AXF1-0513-05
1AXF1-0523-01
1RXF1-0509-01 1R1F1-0503-01
GPO (M)
A3AX-0539-01
GPO (F)
A1AX-0503-01
1B1A3-0541-01
*A1A1-0001-XX
GPPO (M)
BXBX-0523-01
BXBX-0523-02
GPPO (F)
*B1B1-0001-XX
G3PO (F)
R1R1-0001-01
* “XX” refers to bullet lengths. GPO and GPPO blindmate interconnect bullets are available in different lengths. Please consult the factory for information
on bullet lengths not found in this catalog.
GMS Adapters
GMS (M)
GMS (F)
SMA (M)
00218-400-3
00218-200-3
00218-201-3
SMA (F)
00218-300-3
00218-301-3
00218-100-3
00218-101-3
GPO (M)
GMS (M)
2-HOLE
FLANGE
MOUNT
GMS (F)
2-HOLE
FLANGE
MOUNT
GMS (F)
BULKHEAD
GMS (F)
THREAD-IN
00218-202-3
00218-315-3
00218-103-3
**00118-118-3(choose detent type)
00218-104-3
**00118-116-3(choose detent type)
**Choose Detent type (FD, LD or SB)
153
Appendix
Assembly Procedures
The following general assembly procedure* defines both GPO and GPPO, straight and right angle cable connectors, for
both semi rigid and flexible cable. For further assistance, or if the connector you are using is not found, please contact
Corning Gilbert for specific assembly procedures.
1.0 Cable preparation:
1.1 Cut the cable to length required.
1.2 For semi rigid cable, score the outer conductor with a razor blade or a semi rigid trim tool. Reference
tables I-IV, Trim Length “B”, for distance from the end of the cable to the score mark.
Note: Different trim lengths may apply, dependent upon the type of GPO connector being installed. The dielectric may be cut flush with the
outer conductor or may be stepped.
Table I: GPO Straight
Part Number
A001-B83-01
A001-D83-01
A014-B11-01
A014-D11-01
A014-D11-02
A014-H71-01
Trim Length “A”
N/A
N/A
N/A
.020” - .025”
N/A
.060”
Table II: GPO Right Angle
Trim Length “B”
.085”
.085”
.090”
.075”
.060”
.150”
Table III: GPPO Straight
Part Number
B014-B11-01
B014-D11-01
B014-E11-01
B016-B11-01
B016-B33-01
B016-D33-01
Trim Length “A”
.020” - .025”
N/A
N/A
.100”
.020” - .025”
N/A
Part Number
A015-B11-01
A015-D11-01
A015-D11-03
A015-B71-01
A015-F71-01
A015-H71-01
Trim Length “A”
.025”
.025”
N/A
N/A
.120”
.250”
Trim Length “B”
.065”
.060”
.045”
.080”
.215”
.340”
Table IV: GPPO Right Angle
Trim Length “B”
.065”
.055”
.055”
.180”
.065”
.040” - .050”
Part Number
B015-B11-01
B015-B11-02
B015-D11-01
B015-D11-02
Trim Length “A”
.025”
.010” - .015”
N/A
.075” - .080”
Trim Length “B”
.060”
.060”
.045”
.180”
1.3 Whether the cable is now formed per specification or remains straight, the semi rigid cable should be temperature cycled to aid dielectric stability. Flexible cable does not need to be temperature cycled.
1.4 Thoroughly clean S/R cable outer conductor using fine grain sandpaper or steel wool as indicated, then wipe
area clean with denatured alcohol or an equivalent cleaner.
* Applications may vary. These instructions are to be used as guidelines only. All dimensions are in inches.
154
Appendix
1.5 Remove the semi rigid outer conductor with hole pliers or trim flexible cable accordingly. Do not nick the center conductor.
Note: It is recommended when working with flexible cable and solder-on connectors to make the cut on the jacket (at “B”), but do not completely
remove the jacket at this point. Rather, slide the jacket to the end of the braid and then solder dip the cable so that the braid does not expand
once the jacket is removed. When working with crimp-on connectors, a solder dip is not necessary.
1.6 Point and de-burr the center conductor.
2.0 Center contacts:
The majority of Corning Gilbert’s right angled GPO and GPPO connectors have captivated contacts. Therefore,
they do not require the extra step of soldering on a center conductor. Some of these connectors include: A015-B1101, A015-D11-01, B015-B11-01 and B015-B11-02.
2.1 If required, place the dielectric stop and center conductor onto the cable as shown. If there is no dielectric stop,
place the contact flush against the dielectric.
Note: In some cases, a shim is used to create an “air gap” between the dielectric and the center contact. The connectors on this AP which require
the use of a .010” shim include: A014-D11-02, B014-E11-01 and B015-D11-02.
2.2 The following diagram supports Corning Gilbert’s standard tooling for all center contact soldering.
3.0 Solder center contact to cable inner conductor:
3.1 Tin inner conductor of cable.
3.2 Place center contact in appropriate locator tool. Heat center contact and push it over inner conductor of cable to
rest firmly against the supplied dielectric stop, shim or cable dielectric. Use a minimum amount of heat, for a
limited time, with a maximum contact temperature of 550º F.
3.3 Remove excess solder.
155
Appendix
4.0 Solder a straight female GPPO connector to cable:
4.1 Fixture as shown.
4.2 Apply liquid flux to joint as necessary.
4.3 Apply heat. Use of resistance soldering unit (hot tips) is required. Use minimum amount of heat and solder
for a limited duration (550º F maximum temperature).
4.4 Allow to cool. Clean solder joint and remove excess flux.
5.0 Solder right angle female GPPO connector to cable:
5.3 Apply heat. Use of resistance soldering unit (hot tips) is required. Use minimum amount of heat and solder
for a limited duration (550º F maximum temperature).
156
Appendix
6.0 Solder a straight female GPO connector to cable.
6.3 Apply heat. Use of resistance soldering unit (hot tips) is required. Use minimum amount of heat and solder for a
limited duration (550º F maximum temperature).
7.0 Solder right angle female GPO contact to cable:
7.1 Install contact positioning tool A096-A99-01 on interface of connector.
7.2 Carefully insert cable into housing. Cable center conductor must engage center contact of connector. Visually
inspect cable junction from rear of connector as shown. Solder cable center conductor to center contact. Remove
excess flux.
7.3 Remove connector from contact positioning tool.
157
Appendix
8.0 Solder right angle female GPO connector to cable:
8.3 Apply heat. Use of resistance soldering unit (hot tips) is required. Use minimum amount of heat and solder for a
limited duration (550º F maximum temperature).
9.0 Install port plug for right angle GPO and GPPO:
9.1 Orient plug as shown.
9.2 Gently press plug until seated. Do no over press as damage to the unit will result.
10.0Interface dimensions:
10.1 Adherence to these assembly procedures will yield interface dimensions shown.
158
Appendix
GPO, GPPO and G3PO Application Notes
Corning Gilbert’s push-on connector products allow users flexibility in modular and board layout (in high density situations), frequency bandwidths from DC to 100 GHz and ease of mating or de-mating using female cable adapters or blind
mate interconnects (bullets)—while achieving a highly reliable electro/mechanical interface. High quality and cost effectiveness make Corning Gilbert the push-on connector of choice.
The GPO male interface is compliant to MIL-STD-348, and it is in accordance with MIL-PRF-39012a and DESC
94007/94008.
I. Materials and Finishes
The following information represents the material/plating used in the manufacturing of push-on male shrouds (soldered,
braised or threaded), blind mate interconnects (bullets), straight female cable connectors, flange/bulkhead connectors and
a wide assortment of adapters.
Table 1-a
Material
Specification
BeCu (Beryllium Copper)
ASTM B 196 and/or ASTM B 197
Brass
ASTM B 36, B121, B16, B16M
Stainless Steel (303/304)
ASTM A484/ A582 or A555/581
Kovar
ASTM F15
Note: BeCu is the common metal used for all contacts.
Table 1-b
Finishing
Gold (50-100u in.)
Nickel (50-100u in.)
Specification
ASTM-B488 Type 1, Class 1.25
AMS-QQ-N-290
Table 1-c
Dielectric
Virgin PTFE Flourocarbon
Torlon (Polyamide-Imide)
PEEK
Tefzel
Specification
ASTM D 1710 and ASTM D 1457
ASTM-600/700
ASTM D 500, 600 & 700
ASTM D-500, 600 & 700
II. Mechanical
Detent: a mechanism that temporarily keeps one part in a certain position relative to that of another, and can be released by applying
force to one of the parts.
Each of the detent levels—Full Detent, Limited Detent and Smooth Bore—provide different levels of force required to
mate and de-mate the connectors. The following table shows available detents, typical engagement and disengagement
forces, and mating cycles for GPOs, GPPOs and G3POs.
Table 2-a
Engage and Disengage Forces (All values are shown in lbs.)
Engage
Disengage
Cycles (Min)
Detent
GPO GPPO G3PO GPO GPPO G3PO GPO GPPO G3PO
Full
7.0
6.5
4.2
9.0
4.5
2.2
100
100
100
Limited
5.0
N/A N/A
7.0
N/A N/A 500 N/A
N/A
Smooth Bore
2.0
2.5
1.2
0.5
1.5
0.9 1000 500
500
Note: Corning Gilbert recommends a Full Detent when used in conjunction with a female cable connector.
Smooth Bore and a Full Detent male shroud are recommended when using a blindmate (bullet) to interface
two modules (mated together) or printed circuit board in a stacked configuration.
159
Appendix
Axial Misalignment: a distance the female interconnect can travel in an axial direction from the reference plane with minimal effect to
the VSWR response.
See Figure 1 and Table 2-b. Swept VSWR versus various axial misalignment data can be found on
Charts 1, 2 & 3.
Figure 1
Visual Concept of Axial Misalignment
Ideal
Misaligned
Table 2-b
Axial Misalignment from Reference Plane vs. VSWR for GPO, GPPO & G3PO
Interface
Full/Limited Detent
GPO (26.5 GHz)
Smooth Bore
Full Detent
GPPO (40 GHz)
Smooth Bore
Full Detent
G3PO (65 GHz)
Smooth Bore
Axial Misalignment
.010 max
.018 max
.010 max
.012 max
.008 max
.010 max
VSWR (Typ)
1.10:1
1.30:1
1.15:1
1.30:1
1.20:1
1.35:1
Chart 1
GPO Interface (A1A1-0001-01)
Axial Misalignment from Reference Plane vs. VSWR @ .001” Increments
1 .7 0
1 .6 0
1 .5 0
VSWR
1 .4 0
1 .3 0
1 .2 0
1 .1 0
Fre que nc y, GHz
160
2 5 .8 0
2 4 .8 8
2 3 .9 6
2 3 .0 4
2 2 .1 2
2 1 .2 0
2 0 .2 8
1 9 .3 6
1 8 .4 4
1 7 .5 2
1 6 .6 0
1 5 .6 8
1 4 .7 6
1 3 .8 4
1 2 .9 2
1 2 .0 0
1 1 .0 8
9 .2 4
1 0 .1 6
8 .3 2
7 .4 0
6 .4 8
5 .5 6
4 .6 4
3 .7 2
2 .8 0
1 .8 8
0 .9 6
0 .0 4
1 .0 0
Appendix
Chart 2
GPPO Interface (B1B1-0001-01)
Axial Misalignment from Reference Plane vs. VSWR @ .001” Increments
Note: Surpassing the axial misalignment of .010” (+/- .005”) will affect the VSWR.
When using a male Full Detent shroud to a bullet, to a Smooth Bore male shroud, tests
show that a .018 (+/- .009”) misalignment would result in a VSWR of 1.3:1 (typical).
Radial Misalignment: the amount of radial deflection a bullet can travel without affecting mechanical performance of both the bullet
and male shroud.
See Figure 2 and Table 2-c. Swept VSWR versus radial misalignment can be found on Charts 3 & 4.
Figure 2
Visual Concept of Radial Misalignment
Ideal
Misaligned
Radial Misalignment and Bullet Length
When using a bullet between GPO/GPPO/G3PO male shrouds, the amount of radial misalignment will depend on the
length of the bullet, with respect to the male shroud. Corning Gilbert standard bullet was used for the following tests.
Table 2-c
Radial Misalignment from Centerline Reference Plane vs. VSWR for GPO, GPPO & G3PO
Interface
Radial Displacement
VSWR (Typ)
GPO
+/- .010”
1.10:1
GPPO
+/- .010”
1.35:1
G3PO
+/- .008”
1.40:1
161
Appendix
Chart 3
GPO Interface (A1A1-0001-01)
Radial Misalignment from Centerline Reference Plane vs. VSWR @ .001” Increments
1.70
1.60
1.50
VSWR
1.40
1.30
1.20
1.10
26.44
25.64
24.84
24.04
23.24
22.44
21.64
20.84
20.04
19.24
18.44
17.64
16.84
16.04
15.24
14.44
13.64
12.84
12.04
11.24
9.64
10.44
8.84
8.04
7.24
6.44
5.64
4.84
4.04
3.24
2.44
1.64
0.84
0.04
1.00
Frequency, GHz
Chart 4
GPPO Interface (B1B1-0001-01)
Radial Misalignment from Centerline Reference Plane vs. VSWR @ .001” Increments
1.70
1.60
1.50
VSWR
1.40
1.30
1.20
1.10
Frequency, GHz
162
63.40
61.48
59.56
57.64
55.72
53.80
51.88
49.96
48.04
46.12
44.20
42.28
40.36
38.44
36.52
34.60
32.68
30.76
28.84
26.92
25.00
23.08
21.16
19.24
17.32
15.40
13.48
11.56
9.64
7.72
5.80
3.88
1.96
0.04
1.00
Appendix
III. Electrical
Table 3-a
General Product Specifications
Parameter
Insulation Resistance (IR)
Dielectric Withstanding Voltage
(DWV)
RF High Pot. @ 5 MHz
Corona Level @ 70,000 ft
Center Conductor Contact
Resistance (mohms max.)
Center Contact Retention
(captivated center conductor)
Temperature Range
-65 to +165º C
Average Power Ratings in Watts
GPO
5,000 Mohms @ 500 Vdc
GPPO
G3PO
5,000 Mohms @ 500 Vdc 3,700 Mohms @ 250 Vdc
500 Vrms
325 Vrms
190 Vrms
325 Vrms
200 Vrms
125 Vrms
250 Vrms
150 Vrms
100 Vrms
6.0
6.0
6.0
1.5lbs min
1.5lbs min
.75 min
Yes
See Chart 5
Yes
See Chart 5
Yes
See Chart 5
Chart 5
Average Power Handling Ratings for GPO, GPPO & G3PO and Typical De-rating Factors
for Temperature/Altitude
200
180
AVERAGE POWER-WATTS
160
140
120
100
80
60
40
GPO
GPPO
G3PO
20
0
0
5
10
15
20
25
30
35
40
45
FREQUENCY (GHZ)
163
Appendix
VSWR Characteristics of a Blindmate Interconnect (Bullet)
Figure 3
Standard Bullet Mated Between Two Male Shrouds
Note: The bullet is bottomed out against
male shrouds. This is the ideal case.
Table 3-b
Blind Mate (Bullet Mated to Male Shroud)
Parameter
Impedance (ohms)
Frequency (GHz)
VSWR (Typ)
GPO
50
26.5
1.15:1
GPPO
50
40
1.15:1
Chart 6
GPO Blindmate Interconnect (Bullet)
Sept. 28, 2005
GPO BMI Bullet
2.00
1.90
1.80
1.70
VSWR
1.60
1.50
1.40
1.30
1.20
1.10
1.00
0
5
10
15
20
25
30
35
40
45
50
Frequency (GHz)
Chart 7
GPPO Blindmate Interconnect (Bullet)
Nov. 30, 2005
GPPO BMI Bullet
2.00
1.90
1.80
1.70
VSWR
1.60
1.50
1.40
1.30
1.20
1.10
1.00
0
5
10
15
20
25
Frequency (GHz)
164
30
35
40
45
50
G3PO
50
65
1.1:1 to 26.5 GHz
1.25:1 to 65 GHz
Appendix
Chart 8
G3PO Blindmate Interconnect (Bullet)
VSWR Characteristics of GPO, GPPO & G3PO Female Straight to Flex or Semi-rigid Cable
Figure 4
Female Straight to Flex or Semi-rigid Cable
(GPO Example)
Table 3-c
VSWR Performance for GPO, GPPO & G3PO Female, Straight Cable Connectors
Parameter
GPO
GPPO
Impedance (ohms)
50
50
Frequency (GHz)
26.5
40
VSWR (max)
1.10:1
1.10:1 to 26.5 GHz
1.20:1 to 40 GHz
G3PO
50
65
1.10:1 to 26.5 GHz
1.25:1 to 65 GHz
Note: The above data was generated using two female straight connectors with a length of coax in between.
165
Appendix
Chart 9
GPO Female Straight Connector
0119-925-1
Aug. 31, 2005
GPO Female to .086" S/R
2.00
1.90
1.80
1.70
VSWR
1.60
1.50
1.40
1.30
1.20
1.10
1.00
0
5
10
15
20
25
30
35
40
45
50
Frequency (GHz)
Chart 10
GPPO Female, Straight Connector
0118-926-1
GPPO female straight to .047"
S/R cable
Jun. 13, 2005
2.00
1.90
1.80
1.70
VSWR
1.60
1.50
1.40
1.30
1.20
1.10
1.00
0
5
10
15
20
25
30
35
40
45
50
Frequency (GHz)
Surface Mount GPO Connector to Microstrip Matching
Figure 5
GPO Surface Mount Connector on Rogers® 4350 10mil Thick Substrate Material
Structure Visualization
Note: This illustration shows how a GPO SMT
connector (A012-P93-01) is mounted and matched on
microstrip using Rogers® 4350 10-mil thick substrate.
166
Appendix
Figure 6
GPO Microstrip Footprint
Note: Footprint of the printed circuit traces and the plated
hole positions and pre-plate diameters shown above.
Figure 7
Modeled Structure (structure simplification for modeling)
Note: Shows how the GPO SMT connector is modeled for simulation
using SCT Microwave Studio® software.
Chart 11
Input & Output Return Loss Results
Matched GPO™ Connector on 10 -mil Rogers® 4350 Substrate
Input and Output Return Losses
0.000
-10.000
-20.000
-30.000
dB
-40.000
-50.000
-60.000
-70.000 0.0
1.0
2.0
3.0
4.0
5.0
6.0
7.0
8.0
9.0
10.0 11.0 12.0 13.0 14.0 15.0 16.0 17.0
18.0 19.0 20.0
Frequency
167
Appendix
Chart 12
Forward & Reverse Insertion Loss Results
Matched GPO™ Connector on 10 -mil Rogers® 4350 Substrate
Forward and Reverse Insertion Losses
0.000
-0.050
-0.100
dB
-0.150
-0.200
-0.250
-0.300
17.0 18.0 19.0 20.0
0.0
1.0
2.0
3.0
4.0
5.0
6.0
7.0
8.0
10.0 11.0 12.0 13.0
9.0
14. 15.0 16.0
0
Frequency
Note: Forward and reverse insertion losses versus frequency shown above.
Surface Mount G3PO Connector to Microstrip Matching
Figure 8
Structure Visualization
Note: Mounting of a G3PO connector on Rogers 4350B microstrip
with a dielectric thickness of 10 mils (0.010 inches). The dielectric
constant of the substrate is 3.48± .05. The copper upper layer is
assumed to be ½ ounce copper plated up to 2 ounce copper total
(2.7 mils or 0.0027 inches thick).
Figure 9
Structure Simplification for Modeling
Note: This simulation was simplified by setting the output to a
standard 50 ohm coaxial line. The remainder of the structure
matches the G3PO surface mount connection exactly. The reference
plane for the plots of the S parameters is set to the beginning of the
taper at the bottom of the figure.
168
Appendix
Figure 10
Microstrip Footprint
Note: Above footprint is based on simulation data only. Footprints will vary, depending upon layout,
board material and thickness.
Chart 13
Simulated S-Parameters
Note: The maximum input return loss within the simulated frequency range is 32.84202 dB at 12.22 GHz.
The maximum insertion loss was -0.09498425 at 16.28 GHz.
169
Index
Part Number
Description
Page
00118-119-3-LD . . . . . . . . .GMS Adapter . . . . . . . . . . . . . . . . . . . . .133
00119-011-3 . . . . . . . . . . . . .GPO Between Series Adapter . . . . . .122
00218-101-3 . . . . . . . . . . . . .GMS Adapter . . . . . . . . . . . . . . . . . . . . .130
00218-103-3 . . . . . . . . . . . . .GMS Adapter . . . . . . . . . . . . . . . . . . . . .128
00218-104-3 . . . . . . . . . . . . .GMS Adapter . . . . . . . . . . . . . . . . . . . . .131
00218-201-3 . . . . . . . . . . . . .GMS Adapter . . . . . . . . . . . . . . . . . . . . .131
00218-202-3 . . . . . . . . . . . . .GMS Adapter . . . . . . . . . . . . . . . . . . . . .131
00218-301-3 . . . . . . . . . . . . .GMS Adapter . . . . . . . . . . . . . . . . . . . . .129
00219-142-3-V10 . . . . . . . .GPO Between Series Adapter . . . . . .117
0118-921-1 . . . . . . . . . . . . . .GPPO Blindmate Interconnect . . . . .62
0118-927-1 . . . . . . . . . . . . . .GPPO Cable Connector . . . . . . . . . . .54
0118-928-4-CM . . . . . . . . .GPPO Cable Connector . . . . . . . . . . .57
0118-959-1-FD-055 . . . . . .GPPO PCB Mount . . . . . . . . . . . . . . . .47
0118-959-1-FD-100 . . . . . .GPPO PCB Mount . . . . . . . . . . . . . . . .47
0118-959-1-SB-055 . . . . . .GPPO PCB Mount . . . . . . . . . . . . . . . .47
0118-959-1-SB-100 . . . . . .GPPO PCB Mount . . . . . . . . . . . . . . . .47
0118-960-1-FD-055 . . . . . .GPPO PCB Mount . . . . . . . . . . . . . . . .47
0118-960-1-FD-100 . . . . . .GPPO PCB Mount . . . . . . . . . . . . . . . .47
0118-960-1-SB-055 . . . . . .GPPO PCB Mount . . . . . . . . . . . . . . . .47
0118-960-1-SB-100 . . . . . .GPPO Surface Mount . . . . . . . . . . . . .47
0119-202-1 . . . . . . . . . . . . . .GPO Cable Connector . . . . . . . . . . . .24
0119-228-1 . . . . . . . . . . . . . .GPO Hermetic Shroud . . . . . . . . . . . .7
0119-248-1-CM . . . . . . . . .GPO Hermetic Shroud . . . . . . . . . . . .12
0119-248-1-CM-T . . . . . . .GPO Hermetic Shroud . . . . . . . . . . . .13
0119-248-1-FD . . . . . . . . . .GPO Hermetic Shroud . . . . . . . . . . . .12
0119-248-1-FD-T . . . . . . .GPO Hermetic Shroud . . . . . . . . . . . .13
0119-248-1-LD . . . . . . . . . .GPO Hermetic Shroud . . . . . . . . . . . .12
0119-248-1-LD-T . . . . . . .GPO Hermetic Shroud . . . . . . . . . . . .13
0119-248-1-SB . . . . . . . . . . .GPO Hermetic Shroud . . . . . . . . . . . .12
0119-248-1-SB-T . . . . . . . .GPO Hermetic Shroud . . . . . . . . . . . .13
0119-258-3-FD . . . . . . . . . .GPO Thread-In Shroud . . . . . . . . . . .8
0119-258-3-LD . . . . . . . . . .GPO Thread-In Shroud . . . . . . . . . . .8
0119-258-3-SB . . . . . . . . . . .GPO Thread-In Shroud . . . . . . . . . . .8
170
Part Number
Description
Page
0119-397-3-100 . . . . . . . . . .GPPO Right Angle PCB Mount . . .16
0119-411-1 . . . . . . . . . . . . . .GPPO PCB Mount . . . . . . . . . . . . . . . .15
0119-424-3-1 . . . . . . . . . . . .GPO Thread-In Shroud . . . . . . . . . . .9
0119-441-3 . . . . . . . . . . . . . .GPO Flange Mount . . . . . . . . . . . . . . .4
0119-467-3 . . . . . . . . . . . . . .GPO Flange Mount . . . . . . . . . . . . . . .4
0119-502-3 . . . . . . . . . . . . . .GPO Within Series Adapter . . . . . . .113
0119-579-3 . . . . . . . . . . . . . .GPO Thread-In Shroud . . . . . . . . . . .9
0119-711-1 . . . . . . . . . . . . . .GPO PCB Mount . . . . . . . . . . . . . . . . .15
0119-714-3 . . . . . . . . . . . . . .GPO Right Angle PCB Mount . . . . .17
0119-720-1 . . . . . . . . . . . . . .GPO Right Angle PCB Mount . . . . .17
0119-727-3-FD . . . . . . . . . .GPO Cable Connector . . . . . . . . . . . .27
0119-727-3-LD . . . . . . . . . .GPO Cable Connector . . . . . . . . . . . .27
0119-727-3-SB . . . . . . . . . . .GPO Cable Connector . . . . . . . . . . . .27
0119-785-3 . . . . . . . . . . . . . .GPO Flange Mount . . . . . . . . . . . . . . .4
0119-857-3 . . . . . . . . . . . . . .GPO Flange Mount . . . . . . . . . . . . . . .5
02018-315-3 . . . . . . . . . . . . .GMS ESD Adapter . . . . . . . . . . . . . . . .135
02018-316-3 . . . . . . . . . . . . .GMS ESD Adapter . . . . . . . . . . . . . . . .134
02018-317-3 . . . . . . . . . . . . .GMS ESD Adapter . . . . . . . . . . . . . . . .134
02018-318-3 . . . . . . . . . . . . .GMS ESD Adapter . . . . . . . . . . . . . . . .134
02018-320-4 . . . . . . . . . . . . .GMS ESD Adapter . . . . . . . . . . . . . . . .135
1619-001-1-FD . . . . . . . . . .GPO PCB Mount . . . . . . . . . . . . . . . . .15
1619-001-1-LD . . . . . . . . . .GPO PCB Mount . . . . . . . . . . . . . . . . .15
1619-001-1-SB . . . . . . . . . . .GPO PCB Mount . . . . . . . . . . . . . . . . .15
1804-229-3 . . . . . . . . . . . . . .GMS Flange Mount . . . . . . . . . . . . . . .76
1811-400-3 . . . . . . . . . . . . . .SGMS Flange Mount . . . . . . . . . . . . . .95
1811-401-3 . . . . . . . . . . . . . .SGMS Flange Mount . . . . . . . . . . . . . .95
1812-400-3 . . . . . . . . . . . . . .GMS Flange Mount . . . . . . . . . . . . . . .77
Index
Part Number
Description
Page
1815-606-3 . . . . . . . . . . . . . .GMS Cable Connector . . . . . . . . . . . .80
1816-203-3 . . . . . . . . . . . . . .GMS Thread-In Shroud . . . . . . . . . . .79
1816-204-3 . . . . . . . . . . . . . .GMS Flange Mount . . . . . . . . . . . . . . .77
1816-206-3 . . . . . . . . . . . . . .GMS Thread-In Shroud . . . . . . . . . . .79
1816-208-1 . . . . . . . . . . . . . .GMS Edge Mount . . . . . . . . . . . . . . . .80
1881-001-1 . . . . . . . . . . . . . .SGMS Blindmate Interconnect . . . .98
1A1C2-0521-01 . . . . . . . . . .GPO Between Series Adapter . . . . . .119
1A1D1-0501-01 . . . . . . . . . .GPO Between Series Adapter . . . . . .120
1A1F2-0503-01 . . . . . . . . . .GPO Between Series Adapter . . . . . .119
1A3C1-0503-01 . . . . . . . . . .GPO Between Series Adapter . . . . . .119
1A3G1-0533-01 . . . . . . . . . .GPO Between Series Adapter . . . . . .121
1A3H1-0511-01 . . . . . . . . . .GMS Adapter . . . . . . . . . . . . . . . . . . . . .133
1A3H1-0511-02 . . . . . . . . . .GMS Adapter . . . . . . . . . . . . . . . . . . . . .132
1A3H1-0521-01 . . . . . . . . . .GMS Adapter . . . . . . . . . . . . . . . . . . . . .132
1A3H2-0533-01 . . . . . . . . . .GMS Adapter . . . . . . . . . . . . . . . . . . . . .133
1A4H1-0511-02 . . . . . . . . . .GMS Adapter . . . . . . . . . . . . . . . . . . . . .132
1A4H1-0521-01 . . . . . . . . . .GMS Adapter . . . . . . . . . . . . . . . . . . . . .132
Part Number
Description
Page
1A5H1-0511-02 . . . . . . . . . .GMS Adapter . . . . . . . . . . . . . . . . . . . . .132
1A5H1-0521-01 . . . . . . . . . .GMS Adapter . . . . . . . . . . . . . . . . . . . . .132
1B1A3-0541-01 . . . . . . . . . .GPPO Between Series Adapter . . . .123
1B1C1-0501-01 . . . . . . . . . .GPPO Between Series Adapter . . . .125
1B1F1-0503-01 . . . . . . . . . .GPPO Between Series Adapter . . . .124
1B1M1-0509-01 . . . . . . . . .GPPO Between Series Adapter . . . .126
1F1H1-0501-01 . . . . . . . . . .GMS Adapter . . . . . . . . . . . . . . . . . . . . .129
1F1H2-0503-01 . . . . . . . . . .GMS Adapter . . . . . . . . . . . . . . . . . . . . .129
1F1H2-0513-01 . . . . . . . . . .GMS Adapter . . . . . . . . . . . . . . . . . . . . .132
1F2H1-0501-01 . . . . . . . . . .GMS Adapter . . . . . . . . . . . . . . . . . . . . .130
1F2H2-0503-01 . . . . . . . . . .GMS Adapter . . . . . . . . . . . . . . . . . . . . .130
1R3F1-0509-01 . . . . . . . . . .G3PO Between Series Adapter . . . . .128
1R3M1-0509-01 . . . . . . . . .G3PO Between Series Adapter . . . . .128
1R5F1-0509-01 . . . . . . . . . .G3PO Between Series Adapter . . . . .128
1R5M1-0509-01 . . . . . . . . .G3PO Between Series Adapter . . . . .128
6804-100-2 . . . . . . . . . . . . . .SGMS Thread-In Shroud . . . . . . . . . .96
6804-100-3 . . . . . . . . . . . . . .SGMS Cable Connector . . . . . . . . . . .97
9001-823-0 . . . . . . . . . . . . . .GPPO Tool . . . . . . . . . . . . . . . . . . . . . . .146
9001-824-0 . . . . . . . . . . . . . .GPPO Tool . . . . . . . . . . . . . . . . . . . . . . .146
A001-A23-03 . . . . . . . . . . . .GPO PCB Mount . . . . . . . . . . . . . . . . .3
A001-A23-04 . . . . . . . . . . . .GPO PCB Mount . . . . . . . . . . . . . . . . .3
A001-A23-07 . . . . . . . . . . . .GPO PCB Mount . . . . . . . . . . . . . . . . .3
A001-A24-03 . . . . . . . . . . . .GPO PCB Mount . . . . . . . . . . . . . . . . .3
A001-A24-04 . . . . . . . . . . . .GPO PCB Mount . . . . . . . . . . . . . . . . .3
A001-A24-07 . . . . . . . . . . . .GPO PCB Mount . . . . . . . . . . . . . . . . .3
A001-A25-03 . . . . . . . . . . . .GPO PCB Mount . . . . . . . . . . . . . . . . .3
A001-A25-04 . . . . . . . . . . . .GPO PCB Mount . . . . . . . . . . . . . . . . .3
A001-A25-07 . . . . . . . . . . . .GPO PCB Mount . . . . . . . . . . . . . . . . .3
A001-B83-01 . . . . . . . . . . . .GPO Cable Connector . . . . . . . . . . . .21
171
Index
Part Number
Description
Page
A001-D83-01 . . . . . . . . . . . .GPO Cable Connector . . . . . . . . . . . .22
A001-N33-02 . . . . . . . . . . . .GPO Flange Mount . . . . . . . . . . . . . . .3
A003-A23-01 . . . . . . . . . . . .GPO Thread-In Shroud . . . . . . . . . . .5
A003-L11-01 . . . . . . . . . . . .GPO Thread-In Shroud . . . . . . . . . . .6
A003-N33-01 . . . . . . . . . . . .GPO Thread-In Shroud . . . . . . . . . . .7
A005-A23-01 . . . . . . . . . . . .GPO Press-In Shroud . . . . . . . . . . . . .9
A005-L34-01 . . . . . . . . . . . .GPO Press-In Shroud . . . . . . . . . . . . .10
A005-L35-01 . . . . . . . . . . . .GPO Press-In Shroud . . . . . . . . . . . . .10
A006-N33-02 . . . . . . . . . . . .GPO Press-In Shroud . . . . . . . . . . . . .10
A007-L43-01-TAB-X . . . .GPO Hermetic Shroud . . . . . . . . . . . .11
172
Part Number
Description
Page
A007-L43-14 . . . . . . . . . . . .GPO Hermetic Shroud . . . . . . . . . . . .12
A008-L13-03 . . . . . . . . . . . .GPO PCB Mount . . . . . . . . . . . . . . . . .13
A008-L14-03 . . . . . . . . . . . .GPO PCB Mount . . . . . . . . . . . . . . . . .13
A008-L15-03 . . . . . . . . . . . .GPO PCB Mount . . . . . . . . . . . . . . . . .13
A008-L33-01 . . . . . . . . . . . .GPO PCB Mount . . . . . . . . . . . . . . . . .13
A008-L33-02 . . . . . . . . . . . .GPO PCB Mount . . . . . . . . . . . . . . . . .13
A008-L33-05 . . . . . . . . . . . .GPO PCB Mount . . . . . . . . . . . . . . . . .14
A008-L33-06 . . . . . . . . . . . .GPO PCB Mount . . . . . . . . . . . . . . . . .14
A008-L34-01 . . . . . . . . . . . .GPO PCB Mount . . . . . . . . . . . . . . . . .13
A008-L34-02 . . . . . . . . . . . .GPO PCB Mount . . . . . . . . . . . . . . . . .13
A008-L34-05 . . . . . . . . . . . .GPO PCB Mount . . . . . . . . . . . . . . . . .14
A008-L35-01 . . . . . . . . . . . .GPO PCB Mount . . . . . . . . . . . . . . . . .13
A008-L35-02 . . . . . . . . . . . .GPO PCB Mount . . . . . . . . . . . . . . . . .13
A008-L35-05 . . . . . . . . . . . .GPO PCB Mount . . . . . . . . . . . . . . . . .14
A008-P33-01 . . . . . . . . . . . .GPO PCB Mount . . . . . . . . . . . . . . . . .14
A008-P34-01 . . . . . . . . . . . .GPO PCB Mount . . . . . . . . . . . . . . . . .14
A008-P35-01 . . . . . . . . . . . .GPO PCB Mount . . . . . . . . . . . . . . . . .14
A009-P33-01 . . . . . . . . . . . .GPO Right Angle PCB Mount . . . . .16
A010-L13-02 . . . . . . . . . . . .GPO Edge Mount . . . . . . . . . . . . . . . . .17
A010-L14-02 . . . . . . . . . . . .GPO Edge Mount . . . . . . . . . . . . . . . . .17
A010-L15-02 . . . . . . . . . . . .GPO Edge Mount . . . . . . . . . . . . . . . . .17
A010-L33-01 . . . . . . . . . . . .GPO Edge Mount . . . . . . . . . . . . . . . . .18
A010-L33-02 . . . . . . . . . . . .GPO Edge Mount . . . . . . . . . . . . . . . . .18
A010-L33-03 . . . . . . . . . . . .GPO Edge Mount . . . . . . . . . . . . . . . . .18
A010-L33-04 . . . . . . . . . . . .GPO Edge Mount . . . . . . . . . . . . . . . . .18
A010-L34-01 . . . . . . . . . . . .GPO Edge Mount . . . . . . . . . . . . . . . . .18
A010-L34-02 . . . . . . . . . . . .GPO Edge Mount . . . . . . . . . . . . . . . . .18
A010-L34-03 . . . . . . . . . . . .GPO Edge Mount . . . . . . . . . . . . . . . . .18
A010-L34-04 . . . . . . . . . . . .GPO Edge Mount . . . . . . . . . . . . . . . . .18
A010-L35-01 . . . . . . . . . . . .GPO Edge Mount . . . . . . . . . . . . . . . . .18
A010-L35-02 . . . . . . . . . . . .GPO Edge Mount . . . . . . . . . . . . . . . . .18
A010-L35-03 . . . . . . . . . . . .GPO Edge Mount . . . . . . . . . . . . . . . . .18
A010-L35-04 . . . . . . . . . . . .GPO Edge Mount . . . . . . . . . . . . . . . . .18
A012-A93-01 . . . . . . . . . . . .GPO Surface Mount . . . . . . . . . . . . . .19
Index
Part Number
A012-A94-01
A012-A95-01
A012-A97-01
A012-A97-02
A012-L76-03
A012-L96-01
A012-P93-01
A012-P93-04
A012-P94-01
A012-P94-04
A012-P95-01
A012-P95-04
A014-B11-01
A014-D11-01
A014-D11-02
A014-F71-01
A014-H71-01
A014-K11-01
A015-B11-01
A015-B11-02
A015-B71-01
A015-B71-03
A015-D11-01
A015-D11-03
A015-F71-01
A015-H71-01
A016-B83-01
A016-B84-01
A016-B86-01
A016-D53-01
A016-D54-01
A016-D55-01
A016-D73-03
A016-D74-03
A016-D76-03
A016-D83-01
A016-D83-02
A016-D84-01
A016-D86-01
A016-D87-01
A016-G86-01
A016-H83-01
A016-H84-01
A016-H85-01
A018-B71-01
A018-B71-02
A018-D11-01
Description
Page
. . . . . . . . . . . .GPO Surface Mount . . . . . . . . . . . . . .19
. . . . . . . . . . . .GPO Cable Connector . . . . . . . . . . . .21
Part Number
Description
Page
A018-F71-01 . . . . . . . . . . . .GPO Cable Connector . . . . . . . . . . . .33
A033-B93-02-4 . . . . . . . . . .GPO Multiposition Block . . . . . . . . .100
A033-D53-01 . . . . . . . . . . . .GPO Multiposition Block . . . . . . . . .101
A036-P95-01-4 . . . . . . . . . .GPO Multiposition Block . . . . . . . . .100
A055-A11-01 . . . . . . . . . . . .GPO Load . . . . . . . . . . . . . . . . . . . . . . . .34
A055-A11-02 . . . . . . . . . . . .GPO Load . . . . . . . . . . . . . . . . . . . . . . . .34
A055-A14-01 . . . . . . . . . . . .GPO Load . . . . . . . . . . . . . . . . . . . . . . . .34
A055-A14-02 . . . . . . . . . . . .GPO Load . . . . . . . . . . . . . . . . . . . . . . . .34
A055-A15-01 . . . . . . . . . . . .GPO Load . . . . . . . . . . . . . . . . . . . . . . . .34
A055-A15-02 . . . . . . . . . . . .GPO Load . . . . . . . . . . . . . . . . . . . . . . . .34
A090-A99-01 . . . . . . . . . . . .GPO Tool . . . . . . . . . . . . . . . . . . . . . . . .138
A090-A99-03 . . . . . . . . . . . .GPO Tool . . . . . . . . . . . . . . . . . . . . . . . .138
A090-A99-07 . . . . . . . . . . . .GPO Tool . . . . . . . . . . . . . . . . . . . . . . . .138
A090-A99-09 . . . . . . . . . . . .GPO Tool . . . . . . . . . . . . . . . . . . . . . . . .138
A090-A99-10 . . . . . . . . . . . .GPO Tool . . . . . . . . . . . . . . . . . . . . . . . .139
A090-A99-11 . . . . . . . . . . . .GPO Tool . . . . . . . . . . . . . . . . . . . . . . . .139
A093-A99-01 . . . . . . . . . . . .GPO Tool . . . . . . . . . . . . . . . . . . . . . . . .142
A095-A99-03 . . . . . . . . . . . .GPO Tool . . . . . . . . . . . . . . . . . . . . . . . .141
A096-A99-01 . . . . . . . . . . . .GPO Tool . . . . . . . . . . . . . . . . . . . . . . . .139
A096-A99-02 . . . . . . . . . . . .GPO Tool . . . . . . . . . . . . . . . . . . . . . . . .139
A096-A99-04 . . . . . . . . . . . .GPO Tool . . . . . . . . . . . . . . . . . . . . . . . .140
A096-A99-06 . . . . . . . . . . . .GPO Tool . . . . . . . . . . . . . . . . . . . . . . . .140
A096-A99-07 . . . . . . . . . . . .GPO Tool . . . . . . . . . . . . . . . . . . . . . . . .140
A096-A99-08 . . . . . . . . . . . .GPO Tool . . . . . . . . . . . . . . . . . . . . . . . .140
A096-A99-09 . . . . . . . . . . . .GPO & GMS Tool . . . . . . . . . . .141&147
A098-A98-08 . . . . . . . . . . . .GPO Tool . . . . . . . . . . . . . . . . . . . . . . . .141
A098-A99-01 . . . . . . . . . . . .GPO Tool . . . . . . . . . . . . . . . . . . . . . . . .142
A098-A99-02 . . . . . . . . . . . .GPO Tool . . . . . . . . . . . . . . . . . . . . . . . .142
A098-A99-03 . . . . . . . . . . . .GPO Tool . . . . . . . . . . . . . . . . . . . . . . . .142
A098-A99-04 . . . . . . . . . . . .GPO Tool . . . . . . . . . . . . . . . . . . . . . . . .141
A098-A99-05 . . . . . . . . . . . .GPO Tool . . . . . . . . . . . . . . . . . . . . . . . .143
A098-A99-10 . . . . . . . . . . . .GPO Tool . . . . . . . . . . . . . . . . . . . . . . . .143
A1A1-0001-01 . . . . . . . . . . .GPO Blindmate Interconnect . . . . . .35
A1A3-0503-01 . . . . . . . . . . .GPO Within Series Adapter . . . . . . .112
B001-A23-01 . . . . . . . . . . . .GPPO Flange Mount . . . . . . . . . . . . . .41
173
Index
Part Number
Description
Page
B001-D33-01 . . . . . . . . . . . .GPPO Cable Connector . . . . . . . . . . .59
B001-K33-01 . . . . . . . . . . . .GPPO Cable Connector . . . . . . . . . . .59
B001-N33-01 . . . . . . . . . . . .GPPO Flange Mount . . . . . . . . . . . . . .41
B001-N35-01 . . . . . . . . . . . .GPPO Flange Mount . . . . . . . . . . . . . .41
B003-A23-01 . . . . . . . . . . . .GPPO Thread-In Shroud . . . . . . . . . .41
B003-A25-01 . . . . . . . . . . . .GPPO Thread-In Shroud . . . . . . . . . .41
B003-L33-01 . . . . . . . . . . . .GPPO Thread-In Shroud . . . . . . . . . .42
B003-N33-01 . . . . . . . . . . . .GPPO Thread-In Shroud . . . . . . . . . .43
B007-L43-03 . . . . . . . . . . . .GPPO Hermetic Shroud . . . . . . . . . .44
B007-L45-01-T . . . . . . . . . .GPPO Hermetic Shroud . . . . . . . . . .45
B007-L45-02 . . . . . . . . . . . .GPPO Multiposition Block . . . . . . . .101
B007-L45-02T . . . . . . . . . . .GPPO Multiposition Block . . . . . . . .101
B007-L45-04-TAB . . . . . . .GPPO Multiposition Block . . . . . . . .102
B007-M43-01-TAB-X . . . .GPPO Hermetic Shroud . . . . . . . . . .46
B008-L13-01 . . . . . . . . . . . .GPPO PCB Mount . . . . . . . . . . . . . . . .46
B008-L13-05 . . . . . . . . . . . .GPPO Multiposition Block . . . . . . . .106
B008-L15-01 . . . . . . . . . . . .GPPO PCB Mount . . . . . . . . . . . . . . . .46
B008-P33-01 . . . . . . . . . . . . .GPPO PCB Mount . . . . . . . . . . . . . . . .47
B008-P35-01 . . . . . . . . . . . . .GPPO PCB Mount . . . . . . . . . . . . . . . .47
B009-P33-01 . . . . . . . . . . . . .GPPO PCB Mount . . . . . . . . . . . . . . . .48
B009-P33-02 . . . . . . . . . . . . .GPPO PCB Mount . . . . . . . . . . . . . . . .48
B009-P35-01 . . . . . . . . . . . . .GPPO PCB Mount . . . . . . . . . . . . . . . .48
B009-P35-02 . . . . . . . . . . . . .GPPO PCB Mount . . . . . . . . . . . . . . . .48
B010-L13-01 . . . . . . . . . . . .GPPO Edge Mount . . . . . . . . . . . . . . .48
174
Part Number
Description
Page
B011-A93-01 . . . . . . . . . . . .GPPO Multiposition Block . . . . . . . .105
B011-A95-13 . . . . . . . . . . . .GPPO Multiposition Block . . . . . . . .105
B012-L13-01 . . . . . . . . . . . .GPPO Surface Mount . . . . . . . . . . . . .51
B012-P93-01 . . . . . . . . . . . . .GPPO Surface Mount . . . . . . . . . . . . .51
B014-B11-01 . . . . . . . . . . . .GPPO Cable Connector . . . . . . . . . . .52
Index
Part Number
Description
Page
B030-L93-02-7 . . . . . . . . . .GPPO Multiposition Block . . . . . . . .106
B030-L95-02-7 . . . . . . . . . .GPPO Multiposition Block . . . . . . . .106
B031-B93-01-4 . . . . . . . . . .GPPO Multiposition Block . . . . . . . .102
B055-A11-01 . . . . . . . . . . . .GPPO Load . . . . . . . . . . . . . . . . . . . . . .60
B055-A11-02 . . . . . . . . . . . .GPPO Load . . . . . . . . . . . . . . . . . . . . . .60
B055-A11-05 . . . . . . . . . . . .GPPO Load . . . . . . . . . . . . . . . . . . . . . .60
B055-A11-06 . . . . . . . . . . . .GPPO Load . . . . . . . . . . . . . . . . . . . . . .61
B055-A13-01 . . . . . . . . . . . .GPPO Load . . . . . . . . . . . . . . . . . . . . . .60
B055-A13-02 . . . . . . . . . . . .GPPO Load . . . . . . . . . . . . . . . . . . . . . .60
B055-A15-01 . . . . . . . . . . . .GPPO Load . . . . . . . . . . . . . . . . . . . . . .60
B055-A15-02 . . . . . . . . . . . .GPPO Load . . . . . . . . . . . . . . . . . . . . . .60
B090-A99-05 . . . . . . . . . . . .GPPO Tool . . . . . . . . . . . . . . . . . . . . . . .143
B090-A99-06 . . . . . . . . . . . .GPPO Tool . . . . . . . . . . . . . . . . . . . . . . .145
B090-A99-07 . . . . . . . . . . . .GPPO Tool . . . . . . . . . . . . . . . . . . . . . . .145
B095-A99-05 . . . . . . . . . . . .GPPO Tool . . . . . . . . . . . . . . . . . . . . . . .145
B096-A93-01 . . . . . . . . . . . .GPPO Tool . . . . . . . . . . . . . . . . . . . . . . .143
B096-A99-01 . . . . . . . . . . . .GPPO Tool . . . . . . . . . . . . . . . . . . . . . . .144
B096-A99-02 . . . . . . . . . . . .GPPO Tool . . . . . . . . . . . . . . . . . . . . . . .144
B098-A99-01 . . . . . . . . . . . .GPPO Tool . . . . . . . . . . . . . . . . . . . . . . .144
B098-A99-02 . . . . . . . . . . . .GPPO Tool . . . . . . . . . . . . . . . . . . . . . . .144
B098-A99-03 . . . . . . . . . . . .GPPO Tool . . . . . . . . . . . . . . . . . . . . . . .144
B098-A99-07 . . . . . . . . . . . .GPPO Tool . . . . . . . . . . . . . . . . . . . . . . .146
B098-A99-08 . . . . . . . . . . . .GPPO Tool . . . . . . . . . . . . . . . . . . . . . . .145
B1B1-0001-01 . . . . . . . . . . .GPPO Blindmate Interconnect . . . . .62
B3B3-0523-01 . . . . . . . . . . .GPPO Within Series Adapter . . . . . .123
H001-D11-01 . . . . . . . . . . . .GMS Cable Connector . . . . . . . . . . . .82
H001-L11-01 . . . . . . . . . . . .GMS Flange Mount . . . . . . . . . . . . . . .75
H001-L11-03 . . . . . . . . . . . .GMS Flange Mount . . . . . . . . . . . . . . .76
H001-M11-01 . . . . . . . . . . .GMS Flange Mount . . . . . . . . . . . . . . .75
Part Number
Description
Page
H001-M11-02 . . . . . . . . . . .GMS ESD Flange Mount . . . . . . . . . .92
H001-M11-03 . . . . . . . . . . .GMS ESD Flange Mount . . . . . . . . . .92
H001-N11-01 . . . . . . . . . . . .GMS Flange Mount . . . . . . . . . . . . . . .75
H001-N11-04 . . . . . . . . . . . .GMS ESD Flange Mount . . . . . . . . . .92
H001-N11-05 . . . . . . . . . . . .GMS ESD Flange Mount . . . . . . . . . .92
H001-R32-01 . . . . . . . . . . . .GMS Cable Connector . . . . . . . . . . . .84
H003-L11-01 . . . . . . . . . . . .GMS Thread-In Shroud . . . . . . . . . . .79
H003-N11-01 . . . . . . . . . . . .GMS Thread-In Shroud . . . . . . . . . . .80
H014-B31-01 . . . . . . . . . . . .GMS ESD Cable Connector . . . . . . .93
H014-D11-04 . . . . . . . . . . . .GMS ESD Cable Connector . . . . . . .93
H014-K11-01 . . . . . . . . . . . .GMS Cable Connector . . . . . . . . . . . .87
H018-E32-01 . . . . . . . . . . . .GMS Cable Connector . . . . . . . . . . . .82
H018-R32-02 . . . . . . . . . . . .GMS ESD Cable Connector . . . . . . .94
H018-S32-01 . . . . . . . . . . . .GMS Cable Connector . . . . . . . . . . . .84
H055-A11-01 . . . . . . . . . . . .GMS Load . . . . . . . . . . . . . . . . . . . . . . . .91
H055-A12-01 . . . . . . . . . . . .GMS Load . . . . . . . . . . . . . . . . . . . . . . . .91
H055-A32-02 . . . . . . . . . . . .GMS ESD Load . . . . . . . . . . . . . . . . . .94
H096-A99-01 . . . . . . . . . . . .GMS Tool . . . . . . . . . . . . . . . . . . . . . . . .146
H098-A99-01 . . . . . . . . . . . .GMS Tool . . . . . . . . . . . . . . . . . . . . . . . .146
L096-A99-01 . . . . . . . . . . . .Miscellaneous Tool . . . . . . . . . . . . . . . .148
175
Index
Part Number
Description
Page
P001-K94-01 . . . . . . . . . . . .SGMS Cable Connector . . . . . . . . . . .97
P001-M35-01 . . . . . . . . . . . .SGMS Flange Mount . . . . . . . . . . . . . .95
P003-L35-01 . . . . . . . . . . . .SGMS Thread-In Shroud . . . . . . . . . .96
P031-G94-02-2 . . . . . . . . . .SGMS Multipositon Block . . . . . . . . .109
P032-L95-01-2 . . . . . . . . . .SGMS Multipositon Block . . . . . . . . .109
R007-T43-01 . . . . . . . . . . . .G3PO Multiposition Block . . . . . . . .107
R008-L13-02 . . . . . . . . . . . .G3PO PCB Mount . . . . . . . . . . . . . . . .67
R008-L16-01 . . . . . . . . . . . .G3PO PCB Mount . . . . . . . . . . . . . . . .67
R010-L13-03 . . . . . . . . . . . .G3PO Edge Mount . . . . . . . . . . . . . . . .67
R010-L15-03 . . . . . . . . . . . .G3PO Edge Mount . . . . . . . . . . . . . . . .67
R012-T95-01 . . . . . . . . . . . .G3PO Surface Mount . . . . . . . . . . . . .68
R014-B11-01 . . . . . . . . . . . .G3PO Cable Connector . . . . . . . . . . .69
R014-K11-01 . . . . . . . . . . . .G3PO Cable Connector . . . . . . . . . . .69
R032-V53-01 . . . . . . . . . . . .G3PO Edge Mount . . . . . . . . . . . . . . . .68
R033-K54-01 . . . . . . . . . . . .G3PO Cable Connector . . . . . . . . . . .70
176
Part Number
Description
Page
R055-A11-01 . . . . . . . . . . . .G3PO Load . . . . . . . . . . . . . . . . . . . . . . .70
R055-A13-01 . . . . . . . . . . . .G3PO Load . . . . . . . . . . . . . . . . . . . . . . .70
R055-A15-01 . . . . . . . . . . . .G3PO Load . . . . . . . . . . . . . . . . . . . . . . .70
R095-A99-01 . . . . . . . . . . . .G3PO Tool . . . . . . . . . . . . . . . . . . . . . . .146
R098-A99-01 . . . . . . . . . . . .G3PO Tool . . . . . . . . . . . . . . . . . . . . . . .147
R1R1-0001-01 . . . . . . . . . . .G3PO Blindmate Interconnect . . . . .71
R1R1-0001-02 . . . . . . . . . . .G3PO Blindmate Interconnect . . . . .71
R1R1-0001-03-118 . . . . . . .G3PO Blindmate Interconnect . . . . .71
W001-L11-01 . . . . . . . . . . . .GMS Flange Mount . . . . . . . . . . . . . . .78
W014-K11-01 . . . . . . . . . . .GMS Cable Connector . . . . . . . . . . . .87
Y007-L42-01 . . . . . . . . . . . .GPPO Hermetic Seal . . . . . . . . . . . . .61
Y007-L42-02 . . . . . . . . . . . .GPO Hermetic Seal . . . . . . . . . . . . . . .35
Y007-L42-05 . . . . . . . . . . . .GPPO Hermetic Seal . . . . . . . . . . . . .61
Y071-L02-01 . . . . . . . . . . . .GPPO Pin . . . . . . . . . . . . . . . . . . . . . . . .64
Y071-L02-02 . . . . . . . . . . . .G3PO Pin . . . . . . . . . . . . . . . . . . . . . . . .72
Y071-L92-01 . . . . . . . . . . . .GPPO Pin . . . . . . . . . . . . . . . . . . . . . . . .64
Y071-L92-02 . . . . . . . . . . . .GPO Pin . . . . . . . . . . . . . . . . . . . . . . . . . .38
Y071-L92-03 . . . . . . . . . . . .GPO Pin . . . . . . . . . . . . . . . . . . . . . . . . . .38
Y071-L92-04 . . . . . . . . . . . .GPO Pin . . . . . . . . . . . . . . . . . . . . . . . . . .38
Corning Gilbert Inc.
Microwave Products
5310 West Camelback Road
Glendale, Arizona 85301 USA
phone:
fax:
800 651 8869 (U.S. and Canada)
(01) 623 845 5613 (International)
(01) 623 934 5160
website:
e-mail:
www.corning.com/corninggilbert
[email protected]
© Corning Gilbert Inc. G-1500-102 11/06

GPO - MHz Marketing, Inc.

Transcription

Similar documents

Catalogue Issue 10.indd

BMA Series

Copyright © 2015 Matthew David Crawford All rights reserved. The

Spec Sheet

Cristal Scholer/Scholer Crystal