steel-sided auger bunk feeder

STEEL-SIDED AUGER
BUNK FEEDER
CONTINUOUS AUGER EQUALS HIGH VOLUME
Galvanized
cover
Adjustable stands determine
the amount of feed delivered
to the bunk
Finishing sections
with flow control
shield allows feed to
auger out the end
Starter Section - allows the feeder
to start feeding or conveying
immediately (depending on
application)
Nylatron auger bushing
supported by a stainless
steel saddle
Environmentally friendly powder
coated, heavy-duty 14 gauge steel
sides, auger and adjustable stands
- highly corrosion resistant.
HEAVY DUTY DRIVE UNIT
•Non-rust nickel plated #60
roller chain
•Heavy-duty standard bearings
•Double belt drive
Galvanized hopper
with auger to distribute
feed
YEARS OF TROUBLE-FREE USE!
Some photos shown whithout shields.
PLANK-SIDED AUGER BUNK FEEDER
PROVEN RELIABILITY • LOW MAINTENANCE • HIGH VOLUME • 9’’ OR 12’’
Inexpensive and versatile, cuts feeding time to minutes. Extremely
powerful oil bath gear drive. Bigger and better than ever for larger
feed bunk installations. Operates smoothly and efficiently.
Side mounted hanger bearings shown top mounted bearings also available.
STANDARD EQUIPMENT
included on both 3 HP and 5HP gear box:
•Belt guards
•Tapered roller bearings & totally
enclosed construction
•Adjustable stands as shown
•All splice plates for side planks
•Safety Auger top covers
•Wrench to adjust stand height
HEAVY DUTY GEAR
BOX - COMPARE TO
THE COMPETITION!
HOPPER OPTIONAL
•9’’ augers available in 5’ and 10’
lengths
•9’’ augers feature 3/16’’ flighting
mounted on 2 - 3/8’’ O.D. pipe
•9’’ system requires 2’’ x 10’’ wood
planks
•12’’ augers available in 6’ and 12’
lengths
•12’’ augers feature 1/4’’ flighting
mounted on 2 - 3/8’’ O.D. pipe
•12’’ system requires 2’’ x 12’’ wood
planks
•Augers joined with Cold Rolled Steel
•Coupler shaft
INDUSTRY LEADING OIL
BATH GEAR DRIVE
CUT - AWAY VIEW OF GEAR BOX
Shown without shields.
•3 and 5 HP models
available
•3 HP gear box for under
70’ lengths
•5 HP gear box for over
70’ lengths
Some photos in this brochure have safety shields removed to show additional detail on equipment features. Never operate equipment without safety shields in place. Valmetal
continually updates and improves products and reserves the right to make changes in the design, specifications, or to add improvements to our products without incurring an obligation on equipment purchased. Valmetal’s continuing program of product improvement makes specifications, equipment and model availability subject to change without notice.
YOUR LOCAL DEALER:
230, Boulevard industriel
Saint-Germain-de-Grantham
(Québec) J0C 1K0 Canada
Tel : 819 395-4282
Fax : 819 395-2030
15497 State Hwy 131
Tomah, WI 54660
United States
Tel : (608) 374-2206
Fax: (608) 374-2302
[email protected] - www.hanson-unloaders.com