Technical Guide

Transcription

Technical Guide

WebbLok
SAFE - CORDLESS - TJC COMPLIANT
WebbShade, Inc. 1-800-262-9322 | www.webbshade.com | [email protected]
2013/0804
WebbLok
VIRTUALLY INDESTRUCTIBLE WINDOW TREATMENT SOLUTIONS
SAFE FOR ALL
ENVIRONMENTS
BUILT TOUGH
Virtually indestructible, these unique window shades are designed specifically
for psychiatric facilities and institutional settings where high user abuse is likely
to occur, such as developmental centers, alzheimers wards, drug and alcohol
rehab centers, and at-risk youth residential centers.
This shade is built tough to withstand the worst abuse and remain safe and
operable for years. Many WebbLok (formerly Level-Lok) shades are still in
use after 35 years. Independently tested, WebbLok meets all Joint
Commission requirements for behavioral health areas with the added
benefit of user-friendly operation.
VINYL SHADE FABRIC
WebbShade’s custom print collection includes both blackout and light filtering
patterns offering 100% privacy. Want to create an extraordinary environment?
We offer in-house custom printed patterns, logos, or photos on your shades.
SOLAR SCREEN MESH
Choose from Vertilux Sunscreen, Alkenz Sunshadow or Phifer 7100 in various
weights, light filtering percentages, and color assortment. They can also be
printed to your specifications.
Decorative fabric textures add a warm, elegant atmosphere to long term
residential facilities, libraries and schools. All fabrics are GreenGuard certified,
anti-bacterial (ASTM G21, ASTM G22), environmentally friendly (Oeko-Tek
Standard 100), energy saving, and non-toxic, as well as flame retardant (NFPA
701, CA US Title 19).
All WebbShades are proudly made in the USA.
2013/0804
PRICE RANGE ESTIMATES
Level 2
$202.00
Reinforced Vinyl Scrim
Level 3
Level 5
$225.00
$254.00
Vertilux Blackout Collection
Alkenz Sunshadow / Vertilux Noche
Level 6
Level 7
Level 8
$285.00
$319.50
Vertilux Screens
Printed Vinyl / Unprinted Phifer 7100
$357.50
Printed Alkenz, Vertilux, Phifer 7100
Prices based on 48 “ x 60” window
The above prices include fabric valance and normal inside mounting
hardware. Specialty fabric choices, OEM fabrics, and printed fabrics may
involve addtional charges.
Installation and specialty hardware, such as outside mount hardware, security
boxes and backplates, are additional.
Quantity discounts are available. Please send us your exact window
count, approximate sizes, list any special needs, and we will calculate your
pricing for you.
Quantity Discount (on shades only)
20 or more shades
40 or more shades
70 or more shades
200 or more shades
3%
7%
10%
15%
2015/0413
WebbLok
PRODUCT WARRANTY
15 Year Warranty
WebbLok SYSTEM
Practically indestructible, the WebbLok system operating hardware (spring
roller, side tracks, and all metal and plastic components within the bottom
rail trigger release mechanism) is under warranty for fifteen (15) years against
breakage. Any broken or defective parts returned to the factory freight
prepaid will be replaced and returned to the customer at no charge. This
hardware warranty is valid for 15 years, even if the shade material has been
replaced on the system, as long as the replacement was done using
WebbShade material under our supervision or guidance.
3 Year Warranty
SHADE FABRICS
We maintain a 3 year warranty on fabrics used on the WebbShade systems
against defects in material and workmanship from the date of installation.
This covers the shade in normal commercial use and does not cover
damage caused by improper cleaning, or willful abuse such as slashing,
cutting, excessive heat, etc. Shades must be returned to factory or
authorized agency, freight prepaid, for inspection. Repair or replacement will
be made at WebbShade’s discretion.
1 Year Warranty
INSTALLATION
WebbShade guarantees installation for 1 year upon date of completion for
services performed by one of our factory trained installers. A happy and
satisfied lifetime customer is our goal.
2013/0804
SECURITY BOX OPTIONS FOR HIGH RISK AREAS
In areas with dangerous or high-risk clients,
tampering with or removing the spring roller may be
prevented with the optional security box and
security box backplate.
Durable for high-risk areas
Added at-risk prevention
Prevents removal without special tools
Completely secures spring roller
24 gauge galvanized sheet metal
Access from behind prevented with
optional backplate
Standard powder-coat of security box and
back plate available in white, off-white,
beige or bronze.
* Additional powder-coat colors available
upon request, charges may apply.
15/01
Standard Security Box - SSB
4 1/4”
5 1/4 “
7”
5/8 “
5 1/4 “
5/8 “
5 1/4 “
5 1/4 “
5/8 “
4
1/4“
Bracket Plate
3 3/16 “
5/8 “
Reverse Lip
Security Box
Back Plate
Up to 60” – 24 gauge
60” to 75” – Heavy Duty 22 gauge
Standard powder-coat of security box and back plate
powder-coat colors available, charges may apply.
Industry standard 1/4” space between fabric and track required for proper operation. Privacy mullion provided upon request.
For installation information
www.youtube.com/webbshade
P.O. Box 1405
2013/1017
El Cajon CA 92022 | 1-800-262-9322 | www.webbshade.com
| [email protected]
Angled Security Box - SB5A
4 1/16 “
3 9/16 “
Security
Box
3 1/2 “
7”
5/8 “
4 1/4“
120
5 1/2 “
3 1/2“
6 1/8“
3 9/16“
5/8 “
3 1/2“
Bracket Plate
2 5/8 “
Security Box
5/8 “
Back Plate
P.O. Box 1405
2015/3007
| [email protected]
Angled Security Box - SB5A Reduced Depth
Inside Mount Adapation
3 1/2“
3 9/16 “
Security
Box
3 1/2 “
7”
5/8 “
3 1/2“
5/8”
1/2”
120
5 1/8 “
3 1/2“
6 1/8“
3 1/2“
Wood Top
Lip Support
5/8 “
3 1/2 “
Bracket Plate
2 5/8 “
Security Box
5/8 “
Back Plate
P.O. Box 1405
2015/3007
| [email protected]
WebbLok Fabric Valance
8“
3 1/16“
3 5/16“
1 1/2“
1/2“
3 1/16“
2 5/16“
Headrail
Mount
3/4“
3 5/16“
Bracket Plate - Front
1 1/2“
Headrail
Bracket Plate - Side
P.O. Box 1405
2013/1017
| [email protected]
WebbLok Mullion Plan View
Standard mullion sizes with typical guide track placement (size may vary per project requirements) .
1”
1”
Mounting Tab
1“
1“
Track Mounting Holes
Mullion Mounting Holes
“H” Mullion
Floater Mullion
1”
1”
1/8“
1/4“
1“
“L” Mullion Leg In
1“
“L” Mullion Leg Out
1 1/2”
Note:
1/8 “
1 1/2 “
Track
Mounting
Holes
1 1/2 “
3/4“
1/2“
Flange Mullion
Privacy “L” Mullion
Mullion
Guide Track
P.O. Box 1405
2015/3007
| [email protected]
Standard Security Box - SSB Reduced Depth
3 1/8”
4 3/4 “
1/2 “
5/8 “
4 3/4 “
4 3/4 “
4 3/4 “
5/8 “
2 1/2 “
3 1/8”
Security Box
Back Plate
Bracket Plate
P.O. Box 1405
2015/3007
| [email protected]
WebbLok SSB RD Mullion Plan View
Standard mullion sizes with typical guide track placement (size may vary per project requirements) .
1”
1”
Mounting Tab
Tack Mounting Holes
1“
1“
Mullion Mounting Holes
“H” Mullion
Floater Mullion
1”
1”
1“
1“
“L” Mullion Leg In
“L” Mullion Leg Out
Note:
1/8 “
1 1/2 “
1 1/2 “
3/4“
1/2“
1 1/2”
Flange Mullion
Privacy “L” Mullion
Mullion
Guide Track
P.O. Box 1405
2015/3007
| [email protected]
WebbLok Bottom Rail
Complete Bottom Rail
End Tips
End Tubes
Rods
Center Tube
Center Spring
Finger Clips
Finger Clips
Security
Finger Clips
Non-Security
P.O. Box 1405
2013/1017
| [email protected]
Division 12
WebbLok Roller Shade
PART 1 GENERAL
1.1
1.2
1.3
SECTION INCLUDES
A.
Sunscreen roller shades.
B.
Room darkening roller shades.
REFERENCES
A.
ASTM G 21 - Standard Practice for Determining Resistance of Synthetic Polymeric Materials to
Fungi.
B.
NFPA 70 - National Electrical Code.
C.
NFPA 701 - Fire Tests for Flame-Resistant Textiles and Films.
D.
GREENGUARD - Indoor Air Quality Certified
E.
GREENGUARD Children & Schools - Indoor Air Quality Certified
SUSTAINABILITY REQUIREMENTS
A.
Locally Sourced: 90% of materials manufactured locally in Southern California Region
B.
Recycled Content:
1. Pre Consumer: Aluminum and cardboard
2. Post Consumer:
a. Solar Screen Fabric 100% recyclable
b. Aluminum roller tubes and mullions
c. Steel roller spring, center spring, fasteners and bracket plates
d. Plastic end tips, ABS valance, end caps and track
e. Cardboard crates and boxes
C.
Low Emitting Materials
a. GREENGUARD - Indoor Air Quality Certified
b. GREENGUARD Children & Schools - Indoor Air Quality Certified
D.
Optimized Energy Performance
a. Solar screen fabric blocks more than 80% of solar heat and 98% of harmful UV rays,
lowering indoor temperatures. When combined with our exclusive Energy Saving Privacy
Track, energy consumption can be reduced by at least 25-40%.
1.1
SUBMITTALS
A.
Submit under provisions of Section 01300.
B.
Manufacturer's data sheets on each product to be used, including:
1.
2.
Preparation instructions and recommendations.
Styles, material descriptions, dimensions of individual components, profiles, features,
Division 12 – page 1
15/505
3.
4.
1.2
finishes and operating instructions.
Storage and handling requirements and recommendations.
Mounting details and installation methods.
C.
Shop Drawings: Plans, elevations, sections, product details, installation details, operational
clearances, and relationship to adjacent work.
D.
Window Treatment Schedule: For all roller shades. Use same room designations as indicated on
the Drawings and include opening sizes and key to typical mounting details.
E.
Selection Samples: For each finish product specified, one set of shade cloth options and
aluminum finish color samples representing manufacturer's full range of available colors and
patterns.
F.
Verification Samples: Shadecloth sample and aluminum finish sample as selected. Mark face of
material to indicate interior faces.
G.
Maintenance Data: Methods for maintaining roller shades, precautions regarding cleaning
materials and methods, instructions for operating hardware and controls.
QUALITY ASSURANCE
A.
Manufacturer Qualifications: Obtain roller shades through one source from a single manufacturer
with a minimum of twenty years experience in manufacturing products comparable to those
specified in this section.
B.
Installer Qualifications: Installer trained and certified by the manufacturer with a minimum of ten
years experience in installing products comparable to those specified in this section.
C.
Fire-Test-Response Characteristics: Passes NFPA 701 small and large-scale vertical burn.
Materials tested shall be identical to products proposed for use.
D.
Anti-Microbial Characteristics: 'No Growth' per ASTM G 21 results for fungi ATCC9642, ATCC
9644, ATCC9645.
E.
Indoor Air Quality Components:
1. The GREENGUARD Indoor Air Quality Certification Program gives assurance the products
are designed for use in office environments and other indoor spaces meet strict chemical
emissions limits, which contribute to the creation of healthier interiors.
2. The GREENGUARD Children & Schools - Indoor Air Quality Certified Products certified to this
standard are also suitable for use in environments where children and others work, play or
reside.
1.3
DELIVERY, STORAGE, AND HANDLING
A.
1.4
PROJECT CONDITIONS
A.
1.5
Deliver shades in factory-labeled packages, marked with manufacturer and product name, firetest-response characteristics, and location of installation using same room designations indicated
on Drawings and in the Window Treatment Schedule.
Environmental Limitations: Install roller shades after finish work including painting is complete
and ambient temperature and humidity conditions are maintained at the levels indicated for
Project when occupied for its intended use.
WARRANTY
A.
Roller Shade Hardware: Manufacturer's standard non-depreciating fifteen year limited warranty.
15/505
B.
Standard Shadecloth: Manufacturer's standard three year warranty.
C.
Roller Shade Installation: One year from date of substantial completion, not including scaffolding,
lifts or other means to reach inaccessible areas.
PART 2 PRODUCTS
2.1
2.2
MANUFACTURERS
A.
Acceptable Manufacturer: Webb Design, Inc. DBA WebbShade which is located at: P.O. Box
1405, El Cajon, CA, 92022; Tel: 800-262-9322; [email protected]; www.webbshade.com
B.
Substitutions: Not permitted.
ROLLER SHADE TYPES
A.
Manually Operated Cordless Shades:
1.
2.
3.
4.
5.
6.
7.
2.3
SHADE BAND
A.
2.4
Mounting: Surface mounted.
Mounting: Surface mounted with fascia.
Configuration: Single solar shadecloth.
Configuration: Single blackout shadecloth.
Configuration: Double solar and blackout shadecloth.
Solar Shadecloths:
a. Fabric: Alkenz Solar Screen, 1% openness (internal pricing-Level 5)
b. Fabric: Vertilux Solar Screen, 1% openness (internal pricing-Level 6)
c. Fabric: Custom Printed Solar Screen (internal pricing-Level 8)
d. Color: Selected from manufacturer's standard colors.
Blackout Shadecloths:
a. Fabric: Reinforced Vinyl Scrim (internal pricing-Level 3)
b. Fabric: Vertilux Noche Blackout Fabric (internal pricing-Level 5)
c. Fabric: Custom Printed Vinyl Scrim (internal pricing-Level 7)
d. Color: Selected from manufacturer's standard fabrics.
Shade Bands: Construction of shade band includes the fabric, the hem weight, hem-pocket,
shade roller tube, and the attachment of the shade band to the roller tube. Sewn hems are not
acceptable, unless requested by Architect/customer.
1.
Hem Pockets and Hem Weights: Fabric hem pocket with RF-welded seams and concealed
hem weights. Hem weights shall be of appropriate size and weight for shade band. Hem
weight shall be continuous inside the hem pocket. Hem pocket construction and hem
weights shall be similar, for all shades within one room.
2.
Shade Band and Shade Roller Attachment:
a.
Use extruded aluminum shade roller tube of a diameter and wall thickness required
to support shade fabric without excessive deflection. Roller tubes less than 1.55"
(39.37 mm) in diameter for manual shades are not acceptable.
b.
Provide continuous positive engagement of spring mechanism
c.
Provide for positive mechanical attachment of shade band to roller tube; shade band
shall be made removable / replaceable with 0.625” x 0.3125” extruded ABS guide
slats.
SHADE FABRlCATlON
A.
Fabricate units to completely fill existing openings from head to sill and jamb-to-jamb, unless
specifically indicated otherwise.
15/505
2.5
B.
Fabricate shadecloth to hang flat without buckling or distortion. Fabricate with trimmed edges to
hang straight without curling or raveling.
C.
Fabricate units for manual operation without the use of cords or chains using an internal lift spring
completely contained within the shade roller tube.
D.
For railroaded shadebands, provide seams in railroaded multi-width shadebands as required to
meet size requirements and in accordance with seam alignment as acceptable to
Architect/customer. Seams shall be properly located.
COMPONENTS
A.
B.
Access and Material Requirements:
1.
Provide shade hardware allowing for the removal of shade roller tube from brackets without
removing hardware from opening.
2.
Use only ABS with UV inhibitors,reinforced vinyl or Styrene based plastics for all plastic
components of shade hardware.
Manually Operated, Cordless WebbLok Hardware and Shade Brackets
1. Shade Roller:
a.
Tube: Provide extruded aluminum alloy 6061 or 6063, 1.75” diameter with exterior
0.15” x 0.84” slot for attaching shade fabric using 0625” x .3125” extruded ABS guide
slats to provide horizontal adjustment of shade fabric while preventing removal of
fabric after installation.
b.
Lift Mechanism: Inner lift spring shall be constructed of blue spring steel of sufficient
thickness to provide positive mechanical engagement through entire operation of
shade unit. Drive pins shall be heat-treated 1” x .024” steel.
2. Bottom Rail:
a.
Bottom Rail: Provide bottom rail constructed of milled wood board with 0.5” OD
aluminum end tubes and notched center tube to contain aluminum rod mechanisms
and finger clip releases.
i.
Finger Clip Release: Provide non-looping, injection molded ABS finger clips.
Shall be attached to threaded rod mechanism inside notched center tube.
ii.
Rod Mechanism: Provide two each per shade unit, 0.25” aluminum rods,
custom fit to each shade unit, with removable, adjustable end tips. Shall have
one threaded end to attach adjustable end tips.
iii.
End Tips: Provide injection molded, reinforced nylon end tips press fit into
0.375” x 3.5” aluminum tube. Shall attach to threaded end of rod mechanism
to allow for adjustment to exact window size. End tips shall provide lateral
resiliency for proper alignment and engagement of track stops. Custom
break away upon Architect/customer request.
3. Bracket Plates:
a.
Provide mounting bracket plates constructed of 18 gauge galvanized steel with
embossed drive pin slots, and 0.25” x 0.562” nylon bushing inserts pressed into each
idler pin aperture. Shall be corrosion resistant and will not buckle, bend or break under
the shear forces created by the roller tension, shade material, or normal operation.
i.
Fabric Valance Bracket Plates: Shall have a 0.5” x 2.75” lip for attaching fabric
valance.
15/505
ii.
Optional Security Box Bracket Plates: Shall be constructed with 0.75” folded
lips for attaching security boxes. Shall receive a baked on coating to match
security box color as specified by Architect/customer.
4. Guide Tracks:
a.
C.
Provide extruded aluminum alloy 6063-T5 , 0.5” deep x 0.75” wide, and shall be clear
mill track finish or anodized bronze finish. Stops shall be punched from back of track
at a downward angle to create level, preset stops in the upward direction and
eliminate engagement with nylon guide tips moving in a downward direction. All tracks
shall have identical stops for shades to remain level with bottom sill. Track shall be
mounted with screw at top, center, and bottom with a 0.25” nylon spacer over top
screw to contain guide tips within track.
Valance:
1. Shall be self-fabric made from the privacy or blackout fabric, attached to standard 0.875” x
1.5” wood headrail, 8” in length with bar-welded (not sewn) hem. Returns, if required, shall
have a heat sealed corner and can be attached to headboard. Headboard shall be attached
to lip on bracket plate using #8 x 0.5” stainless steel pan head screws.
OR
2. Optional Security Box: Provide front security box and back plate constructed of corrosion
resistant galvanized steel of sufficient thickness to prevent bending or buckling, with a baked
on coating. Shall be custom fit to each window opening with folded lips to eliminate
exposed edged. Security box and back shall create a sealed unit to prevent access and
removal of shade roller. Security box shall be attached to bracket plates using tamper
resistant fasteners.
Security box types:
a. Standard Security Box – SSB
b. Standard Security Box Reduced Depth – SSB RD
c. Angled Security Box – SB5A
d. Angled Security Box Reduced Depth – SB5A RD (includes wooden 5/8” x 5/8” top lip
support for mounting)
D.
Electrical: Electric service for motor controls – Division 16
PART 3 EXECUTION
3.1
3.2
3.3
EXAMINATION
A.
Do not begin installation until substrates have been properly prepared.
B.
If substrate preparation is the responsibility of another installer, notify Architect/customer of
unsatisfactory preparation before proceeding.
PREPARATION
A.
Clean surfaces thoroughly prior to installation.
B.
Prepare surfaces using the methods recommended by the manufacturer for achieving the best
result for the substrate under the project conditions.
INSTALLATION
A.
Install roller shades level, plumb, square, and true according to manufacturer's written
instructions, and located so shade band is not closer than 0.75” to interior face of glass. Allow
15/505
proper clearances for window operation hardware.
3.4
B.
Adjust and balance roller shades to operate smoothly, easily, safely, and free from binding or
malfunction throughout entire operational range.
C.
Clean roller shade surfaces after installation, according to manufacturer's written instructions.
D.
Engage Installer to train Owner's maintenance personnel to adjust, operate and maintain roller
shade systems.
PROTECTION
A.
Protect installed products until completion of project.
B.
Touch-up, repair or replace damaged products before Substantial Completion.
END OF SECTION
15/505
VIRTUALLY INDESTRUCTIBLE WINDOW COVERINGS FOR ALL ENVIRONMENTS
Security boxes are available in the following standard colors:
White
Off-White
Beige
Bronze
Mullions are available in the following standard colors:
Clear Mill Finish
White
Off-White
Beige
Bronze
Track is available in the following standard colors:
Clear Mill Finish
Bronze Anodized
* Additional powder-coat colors available upon request, charges may apply.
* Due to variances among monitors and printers, the color represented may appear differently
than the actual products. Please contact the factory directly for samples.
P.O. Box 1405
2015/0630
| [email protected]
$10
$10
$10
$10
$10
$10
$10
$10
$10
$10
$10
$10
$10
Year 3 Clean in Window
$80
$80
$80
$80
$80
$293
$80
$80
$80
$80
$293
$80
$80
$80
$80
$293
Lifetime Cost $1,919
Cost Per Year $127.90
Removal & Launder 2 times per year
Replace
Replace
Original
Wholesale Cost
WebbShade | P.O. Box 1405, El Cajon CA 92022 | 1-800-262-9322 | webbshade.com
$497-$663
$33.13-$44.20
$10
Lifetime Cost
Cost Per Year
$10
$347$513
$245
$20
$20
$245
$20
$20
$245
$20
$20
$245
$20
$20
$245
$20
$20
| [email protected]
Lifetime Cost $4,700
Cost Per Year $313.33
Repair & Operate for client
Operate for client
Operate for client
Operate for client
Operate for client
Operate for client
Operate for client
Operate for client
Operate for client
Operate for client
Operate for client
Original
$3,275
Wholesale Cost
48" x 60"
10 Year Limited Warranty
48" x 60"
1 Year Limited Warranty
48" x 60"
15 year Limited Warranty
Original Wholesale Cost
(depending on shade fabric)
Integral Mini Blinds
Break-A-Way Curtain
WebbLok Shade w/Security Box
A 1000-window facility installing cordless WebbLok shades can expect to save as much as
$4,037,000 - $4,203,000 over 15 years.
Manufacturers of WebbLok and WebbGlide – Made in USA
Safe, Cordless, Built Tough – Guaranteed.
PO Box 1405, El Cajon, CA 92022 | p: 800-262-9322 | f: 619-596-4511
SDVOSB #17185 | [email protected] | www.webbshade.com
O&M – WebbLok (formerly Level-Lok)
A. Background
B. Operation
C. Maintenance
D. Cleaning
E. Warranty
F. Summary
A. Background
Although TJC does not endorse products, it does inspect facilities for accreditation. In over 30 years of use, the
WebbLok shade system, designed specifically for behavioral health facilities, has consistently assisted facilities
in passing their TJC inspections.
WebbShade has been manufacturing window shades in the USA for almost 70 years, including WebbLok which
was introduced in 1978 specifically for behavioral health environments. The next year, VAMC Loma Linda
became the first facility to use WebbLok for enhancing their behavioral health environment.
The cordless WebbLok shade has been a proven solution in VAMC behavioral health areas for over 35 years,
resulting in a durable, cost-effective product meeting all TJC safety requirements. WebbLok shade systems are
also installed in numerous private psychiatric facilities nationwide, including extremely abusive environments
such as forensic areas, and are the corporate standard for the approximately 200 facilities managed by
Universal Health Services, Inc. Additionally, WebbShade has been on GSA Contract with the Federal
Government for over 30 years.
B. Operation
1. To lift the shade up, squeeze together the finger clips. The shade will move up to a predetermined stop in
the track. Repeat this step until the desired openness is achieved.
2. To lower the shade, pull down on the shade skirt until it reaches the level desired. Another option would be
squeezing on the finger clips which will release the shade from the track so that it may be positioned lower
as well.
C. Maintenance
1. The WebbLok shade system is designed with “end tips” which absorb the brunt of any force placed on the
bottom rail. The purpose is to create a breaking point on the shade which is not only inexpensive and easy
to repair/replace, but also works to keep shade parts completely contained within the shade system,
resulting in no loose parts. Even when an end tip is broken, it remains completely contained in the track.
WebbShade O&M – WebbLoK
Page 1 of 2
Once the security fastener at the top of the track is removed, you then pull the end tip up and out of the
guide track, then simply thread in another one, and replace the shade to its original state.
2. WebbShade commissioned independent testing determining that an unmodified end tip will break at
approximately 35lbs, when dropped from a height of 8”. To achieve varying levels of breakaway weight
requirements, the end tips can be modified in manufacturing, for instance, to a 15 lb. (or less) breakaway
from an 8” drop.
3. In addition, the steel “security box” and “back plate” eliminate access to the roller and are manufactured to
widths no greater than 60”. In special cases where needed, for window widths up to 70”, higher gauge
steel is used.
D. Cleaning
1. General Fabrics - You may use alcohol, solvent*, citrus or bleach based cleaners on any non-printed fabrics.
Avoid using non-diluted bleach as, over time, this may compromise the anti-microbial properties of the
fabric. When in doubt, spot test an inconspicuous area before using a cleaning agent over the entire shade.
*Acetone based solvents, as are used in dry cleaning, are not recommended.
2. Custom Printed Fabrics* - Use a mild soap and water mixture applied with a non-abrasive sponge or cloth.
You may use any type of disinfectant or cleanser as long as you DO NOT USE alcohol or solvent based
cleaners, citrus based cleaners, any abrasive materials and/or any chemicals containing bleach.
Use of materials listed above will result in the printed pattern being removed from the fabric and will void
the WebbShade 3 year fabric warranty. As a suggestion, if in doubt, spot test an inconspicuous section of
the material before wiping the entire shade with cleaner. *Also applies to Vertilux Noche Blackout fabrics.
3. Hardware - Guide tracks may be lightly sprayed (inside) using silicone lubricant only. Never use petroleum
based lubricant.
E. Warranty
All of the WebbLok hardware is warrantied for 15 years from the date of installation against defects in
workmanship.
F. Summary
WebbLok has proven to be a cost-effective solution to numerous adult/adolescent psychiatric inpatient units,
including extremely abusive environments such as forensic areas, by providing a durable, maintenance-free
shade designed to accommodate the safety and operational needs of the behavioral health client.
If you require further information, please feel free to contact Webb at 800-262-9322.
WebbShade O&M – WebbLoK
Page 2 of 2

Technical Guide

Transcription

Similar documents

Shade Sails - Caribbean Shade Products

Scientific Name: Cercis canadensis `Forest Pansy` Common Name

Angyo Star - Southern Living Plants

Get the Look: The Smoky Eye - Shelley Moench

Dichondra - Desert Sun Marketing Company Inc.

PERFORMANCE. STYLE. VALUE.

How to make Rollerblinds

mariners supply pigeon forge

new color fresh

Roman Shades - Timber Blinds