industrial control cables

Transcription

OTHER PRODUCTS BY GLENDINNING...
ELECTRONIC ENGINE CONTROLS for J1939
Glendinning manufactures Electronic Engine Controls for all applications. With devices like actuators and control panels we’ll help you to control your electronic engines. Give our techs a call and let us show you how we can help. Features include:
INDUSTRIAL CONTROL CABLES
• Interface with J1939 engine databus.
• Speed Control knob controls engine speed between Idle and WOT.
• Power light indicates bus power is available.
• Comm Link light indicates that throttle control interface is in contact with engine.
• Other control options available!
CABLEMASTER™ & HOSEMASTER™ — CORD & HOSE REELS
Glendinning also manufactures a complete line of cord and hose reels for a variety of
of applications. All Glendinning cord and hose reels consist of the finest grade materials and workmanship. Features include:
Cablemaster™ Cord Reels
• Zero-effort pull out force & electric retraction of cord / hose reduces
physical strain!
• Compact size — frees up valuable storage space!
• Reel capacity varies depending on type of cord / hose used!
• Easy to install!
• Robust construction — built to last!
Hosemaster™ Hose Reels
Distributed by:
740 Century Circle • Conway, SC 29526 • Telephone: (843) 399-6146 • Facsimile: (843) 399-5005 • www.glendinningprods.com
Made in the USA
SML-CAT-IND
Agriculture • Automotive • Construction • Material Handling • Specialty / Custom
TABLE OF CONTENTS
TERMS & CONDITIONS
• Glendinning Control Cable Advantages............................................................................................................................. 3
• Push / Pull Cables
Series 55 Light......................................................................................................................................................................4
Series 55...............................................................................................................................................................................5
Series 75 Slimline .................................................................................................................................................................6
Series 75 / 95........................................................................................................................................................................7
Series 125.............................................................................................................................................................................8
Series 185.............................................................................................................................................................................9
• Utility Cables
Series 55 / 75 Slimline ........................................................................................................................................................10
Series 75 / 95 / 125 / 185....................................................................................................................................................11
• Twist-O-Lock Cables
Series 55 / 75 Slimline ........................................................................................................................................................12
Series 75 / 95 / 125 / 185....................................................................................................................................................13
• Vernier Cables
Series 55 / 75 Slimline ........................................................................................................................................................14
Series 75 / 95 / 125 / 185....................................................................................................................................................15
• Cable Accessories
Knobs / T-Handles ..............................................................................................................................................................16
Hardware ............................................................................................................................................................................17
• Custom / Specialty Cables
Specialty Cables .................................................................................................................................................................18
— Accelerator Cables
— Markers
— Wire Rope Assemblies
— Colored Control Cables
• Terms & Conditions............................................................................................................................................................ 19
2
P: 800-500-2380 F: 843-399-5005
www.glendinningprods.com
• Cancellations or Order Changes: Orders in process may be cancelled only with Glendinning’s written consent and upon payment of cancellation charges. Customer must allow 60 days for changes in scheduled releases to existing orders and agree to an appropriate adjustment in price,
if any.
• Credit Terms: To those customers or prospective customers whose financial condition meets the credit criteria of Glendinning, terms are Net 30
days from date of invoice. All past due accounts are subject to a charge of 1.25% per month (15% per annum). Should shipment be held for convenience of purchaser beyond the date originally specified, Glendinning reserves the right to bill the goods as if shipped on the specified date. Warehouse
charges incident to such delay shall be billed against the order at a rate of 1.25% per month.
• General: The terms and conditions herewith shall not be affected by those of any customer’s order which conflicts with or is in addition to Glendin-
ning’s terms and conditions unless specifically agreed to in writing by a duly authorized official of Glendinning.
• Laws: Acceptance of any customer’s order does not obligate Glendinning beyond the normal requirements of Local, State and Federal laws and executive orders. Glendinning expressly disclaims assumptions of any of the customer’s obligation under such laws.
• Prices: Prices are based on quantities and frequency of releases as described in quotation. Price may be affected if order quantity is less than quoted
or if number of releases is greater than specified. Quotations must be referenced on the order to assure correct pricing. Glendinning reserves the right
to adjust prices on orders where releases are not specified within a reasonable length of time and then only to the extent of material and labor increases.
• Quotations: All quotations are subject to written acceptance by purchaser within the period of time specified from the date thereof and are limited
to items and quantities listed. Glendinning reserves the right to change or cancel such quotations at anytime prior to receipt of customer’s order.
• Shipments: All shipments are made F.O.B. Conway, SC, freight collect. Unless otherwise specified, Glendinning will ship via common motor car-
rier or other available means as deemed equitable. All cables and components shall be packed in suitable containers and at the discretion of Glendinning unless special packaging instructions are agreed to at time of order. When different items are shipped in same carton, they will be marked and
separated for ease of inspection. Full title and risk of loss shall pass to customer upon departure of products from F.O.B. point. All parcel post shipments
are insured at customer’s expense. Glendinning shall be permitted to make partial shipments and invoice accordingly.
• Taxes: Customer agrees to reimburse Glendinning for any taxes paid or collected as a result of fulfilling customer’s order.
• Tools: Unless otherwise agreed to in advance, charges made to customer for dies, tools and other equipment do not constitute customer owner-
ship or exclusive production rights, nor do they grant the customer the right to remove such tools from Glendinning’s plant. Glendinning shall own all
tools and assumes risk of damage or loss and will maintain such tools in good condition.
• Variations: Unless otherwise specified in writing, the following variations shall constitute satisfactory compliance with order specifications:
Lots of 10 to 99 units — (plus / minus) 10%
Lots of 100 units or more — (plus / minus) 5%
• Warranty: For three (3) years from date of shipment of this product from our plant, Glendinning warrants such product against defective material
or workmanship (but not against damage caused by accident or improper use after such shipment). Glendinning will, at its option, repair, replace or issue
credit for any of its products discovered to be defective within a three year period; provided that (a) Glendinning is notified within two weeks after discovery of such defect (b) the original product is immediately returned to Glendinning transportation charges prepaid and (c) Glendinning’s examination
shall disclose to its satisfaction that such defect has not been caused by improper use or accident after shipment of such product. No warranty applies
to a product’s fitness for specific application. It will be so stated when a product is generally suited for an application. However, since we control neither specific installations nor specific use, we warrant nothing beyond the specifications per print. Glendinning makes no other warranties, expressed
or implied.
P: 800-500-2380 F: 843-399-5005
19
A
B
C
E
A
C
D
GLENDINNING CONTROL CABLES ADVANTAGES
A
B
Not All Control Cables Are Created Equal!
C
B
CA-300965
D
E
D
CA-31539
CA-31537
CA-47641
PIVOTS
PART NO
A
30 Series
CA-31539 0.71875”
0.65625”
0.8125”
40 Series
CA-31537
0.875”
B
C
D
E
0.375”
0.375”
0.375”
0.191”
0.28125”
0.4375”
0.250”
0.250”
0.250”
10 - 32
0.109375”
0.109375”
0.500”
0.203125”
0.250”
0.250 - 28
PIVOT PINS - for terminal eyes
PART NO
A
B
CA-300965
1.4375”
0.65625”
C
0.3125”
D
0.250 - 28
C
A
STOP COLLARS
PART NO
A
CA-37693
0.375”
C
E
CA-33704
B
A
CLIPS
PART NO
CA-33704
A
1.3125”
B
0.375”
C
8 -32
D
0.09375”
D
B
0.375”
C
0.625”
D
0.265625”
• Core Choice — Depending on your application, Glendinning offers 2
types of core - Standard Grade or High Performance Armored Core.
“Standard” Solid Wire Core — Consists of polished stainless
steel solid wire. This core is suitable for most standard control
cable uses and applications. Solid wire cores can be formed on
the ends to eliminate the need for end fittings.
D
B
In an effort to increase profits, many companies have sacrificed the long
term advantages of efficient performance for the short term benefit of
lower costs. That’s a sacrifice we’re not willing to make. Glendinning Control Cables feature:
E
0.28125”
CUSTOM / SPECIALTY
• Accelerator Cables — Accelerator cables are designed to link the accelerator pedal to the engine’s carburator. Designed for use in small trucks, construction equipment, material handling, and off-highway uses. Cables are
manufactured with
• Markers — Extra heavy-duty markers designed to aid in locating the edge of a bumper or plow blade. Full com-
plement steel long lay wires surround a center conduit which greatly increases flexibility in sub-zero temperatures. Abrasion resistant HDPE outer jacket is manufactured from low temperature nylon for extreme weatherability. Rounded
molded tip prevents snow and ice buildup while ensuring a superior moisture seal. Corrosion resistant 300 Series
stainless steel end fittings for longevity. Options include: size of marker, color of outer jacket and type of packaging.
Company name imprint available on request.
• Wire Rope Assemblies — Wire rope assemblies are manufactured using aircraft quality wire rope. All wire
fittings, either staked, diecasted, or swagged are secured to withstand 60% of the breaking strength of the wire rope.
A complete line of eyelets, threaded studs, ball slugs and loops are available for any application.
• Colors — Want your control cable to stand out? We can produce cables with colored conduit and fittings for your
special needs. Subject to minimum quantities — call for specific details.
“PRO-X™” Armored Core — Highly efficient “armored” core
technology is the best in the industry. Stainless steel flat wire
swaged over stainless steel stranded cable and burnished to a
smooth, close tolerance finish, provides high flexibility and incredible strength. Choose PRO-X™ Armored Core for:
— Stiffer Core - simply put it “pushes” a load better.
— More flexiblity - doesn’t bog down with multiple bends.
— Heavy-duty - for applications that require robust control.
— Minimizes drag - while it maximizes performance.
• Inner Liner — Polymer liners minimize friction for maximum efficiency.
The inside diameter is precisely controlled to minimize lost motion and
premature wear, problems that seem to plague most “splined” or “grooved”
liners.
• Conduit — A “full complement” of reinforcing wires are placed in a long
lay pattern to protect the liner and inner core. Close tolerances between
the cable core and conduit result in minimal deflections during cable operation, assuring precise controlling action to the operator.
Standard Cable Cross Section
Solid Stainless
Steel Wire
Core
High Density
Polymer
Outer Jacket
Resists
Abrasions
High Density
Polymer Liner
“Full Complement” Long
Lay Wires
P ro- X ™ Cable Cross Section
Armored
Core
• Outer Jacket – Heavy duty, high density non-hygroscopic polymer jacket
is extruded onto the conduit for maximum cable strength and abrasion resistance.
• End Fittings / Sliders – Quality components are used throughout to ensure maximum corrosion resistance.
— 300 series stainless steel
— Nickel-plated brass
— Zinc-plated steel
— Brass
• Seals & Boots – Durable polymer seals are used to prevent moisture
and contaminents from entering the cable.
High Density
Polymer
Outer Jacket
Resists
Abrasions
High Density
Polymer Liner
Lay Wires
Specifications contained in this catalog are
subject to change without notice
18
P: 800-500-2380 F: 843-399-5005
P: 800-500-2380 F: 843-399-5005
3
SERIES 55 LIGHT
CABLE ACCESSORIES
• Pull / Pull Cables
Pull / Pull control cables are used in applications that require the
transmission of forces in the pull mode of operation. The Series
55 Light uses stranded wire core in their construction. Stranded
wire cores can be fitted with various end fittings or terminations.
Any combination of the end fittings (shown) are available.
• Hardware
Cable Grade:
Series 55 Light
Conduit Size:
.20” diameter Black (Bowden or Longlay Reinforced)
.047-.070 dia. Strand
Cable Core:
Load Capacity:
Up to 20 lbs.
Bend Radius:
recommended 4 inches minimum
A variety of hardware is available and is generally not supplied with your purchase unless otherwise indicated.
A
D
any
Travel:
A
D
CA-29104
CA-29108
B
CA-31126
B
CA-31509
CA-31532
CA-36733
B
BALL JOINTS
PART NO
A
30 Series
CA-31126 0.90625”
40 Series
CA-29104 0.96875”
60 Series
CA-29108
1.125”
"A"
M6x.75
Turnbuckles
Bent Tubes
• Adjustable •
E
B
C
D
E
0.500”
0.5625”
10 - 32
.250 - 28
0.46875”
0.5625”
.3125 - 28
.3125 - 28
0.53125”
0.6875”
.250 - 24
.250 - 24
F
D
D
A
C
E
E
A
"L"
"A"
TERMINAL EYES
PART NO
A
B
30 Series
CA-31980 0.90625” 0.225”
40 Series
CA-37639 0.90625” 0.225”
1.375” 0.3125”
1.375” 0.3125”
60 Series
1.375” 0.3125”
Molded Ø 1
Nylon
3/8-24 UNF Molded Plastic
• Light-Duty Choke •
"A"
"L"
.19
Diecast
1/4-20 UNC
Swaged Metal
• Eyelet •
"L"
Swaged
Eyelets
"A"
Molded
Nylon
Molded
Plastic
B
50202
50202-43C
.75
• Snap-In •
Diecast
B
C
D
E
0.9375” 0.53125” 0.3125”
0.9375” 0.53125” 0.3125”
0.750”
0.500” 0.3125”
0.750”
0.500”
0.250”
0.750”
E
0.500”
"L"
"L"
Plastic Lever Assembly
• Other Options:
• Lever Actuator Assembly •
— Different color conduit available
4
"A"
Molded
Plastic
"A"
• Clip In •
Sphere
Diecast
— Stainless, Nickel Plated Brass, Zinc Plated Steel fitting options
P: 800-500-2380 F: 843-399-5005
CLEVIS
PART NO
30 Series
CA-31800
CA-31125
40 Series
CA-29025
60 Series
D
CLAMPS & SHIMS
PART NO
A
30 Series
CA-31509
1.00”
CA-31538
1.50”
CA-28020
0.375”
40 Series
CA-31532
1.00”
CA-31538
1.50”
CA-28018
0.500”
60 Series
CA-36733
1.25”
1.75”
CA-28019
0.5625”
B
C
D
E
0.375”
1.00”
10 - 32
0.203125”
0.500”
0.500”
0.09375”
1.50”
0.203125”
0.500”
1.00”
10 - 32
0.21875”
0.500”
0.500”
0.09375”
1.50”
0.203125”
0.5625”
1.25”
10 - 32
0.28125”
0.625”
0.625”
0.09375”
1.75”
0.28125”
10 - 32
0.250 - 28
0.250 - 28
0.250 - 28
0.3125” 0.3125 - 24
CA-35531
D
D
E
C
E
C
CA-36174
B
B
A
CABLE HOOK CLIP
PART NO
A
CA-36174
1.00”
CA-35531
1.25”
D
Diecast
CA-31538
F
CA-31800
CA-31125
CA-29025
A
A
B
C
Diecast
A
D
C
E
F
M6x.75
Typ
A
C
C
E
Ø .31
B
B
Swaged Eyelets
"L"
KIT
E
C
A
B
0.500”
0.750”
C
0.375”
0.375”
D
1.50”
1.50”
E
0.203125”
0.203125”
B
C
C
A
B
C
D
E
1.5625”
2.00”
1.00
1.25”
0.1875”
0.28125”
0.1875”
0.250”
10 - 32
10 - 32
2.00”
1.25”
0.28125”
0.250”
.250 - 28
2.25”
1.4375”
0.34375”
0.3125”
.3125 - 24
P: 800-500-2380 F: 843-399-5005
B
D
A
ROD END BALL LINK
PART NO
A
CA-99204
1.6875”
B
0.375”
C
0.250”
D
0.250 - 28
17
CABLE ACCESSORIES
SERIES 55
• Knobs / T-Handles
A variety of knobs and handles are available. Knobs and handles are not included with cables and must be ordered separately. Order using part number — remember to specify nomenclature (if needed).
Push / Pull control cables are used in applications that require
the transmission of forces in both the push and pull mode of operation. The Series 55 uses solid wire core in their construction.
Solid wire cores can be formed on the ends to eliminate the need
to apply separate fittings or terminations. Any combination of the
end fittings (shown) are available. Bend radii should be large
and routing must be simple to avoid a permanent set in the core
wire.
6.00
Plain End (P)
Molded / Plastic
.938
6.00
.130
Clamp End (C)
Molded / Plastic
6.00
.203
XXXXX
XXXXX
S1407
S1407
XXXXX
XXXXX
XXXXX
XXXXX
Plastic
Black
Red
Plastic
Plastic
Plastic
Aluminum
T-HANDLES
S1382
Plastic
S1433
Plastic
S1019
S1396
Aluminum
Black
Red
Black
Red
Black
Red
Chrome
Black
Red
Black
Red
Chrome
1.00” dia.
2.00” dia.
1.125” dia. scalloped
2.00” dia.
2.00” dia.
3.00” dia.
SIZE B
.75”
XXXXX
.984”
1/4 - 20
XXXXX
XXXXX
XXXXX
XXXXX
XXXXX
XXXXX
XXXXX
1.00”
2.375”
1.375”
2.00”
XXXXX
NOMENCLATURE
Plain or specify
(see below)
XXXXX
Plain or specify
(see below)
1.625”
16
6.00
Ø .250
Molded / Plastic
A
N
Y
C
O
M
B
I
N
A
T
I
O
N
A
N
Y
C
O
M
B
I
N
A
T
I
O
N
6.00
see pg. 10 for specific dimensions
P: 800-500-2380 F: 843-399-5005
Ø .325
Molded / Plastic
.938
Clamp End (C)
6.00
.130
Ø .313
Molded / Plastic
6.00
Tab End (T)
.203
Molded / Plastic
.437
.50
Molded / Plastic
Bulkhead End (B)
Utility
Plain End (P)
Shoulder End (S)
Molded / Plastic
.75
• Additional Configurations:
Available nomenclatures: Stop / Shutoff / Throttle / Choke / Open / Close / Emergency Stop / PTO / Raise / Fuel Shutoff / Engine Stop
P: 800-500-2380 F: 843-399-5005
6.00
4 inches minimum
Regular End (R)
Shoulder End (S)
.313 - 32
thread
XXXXX
1/4 - 20
.50
.203
.198
XXXXX
Tab End (T)
Molded / Plastic
.437
6.00
10 - 32
XXXXX
2.00”
3.00”
THREAD
Bend Radius:
up to 3 inches
.688
SIZE“A”
SIZE A
Travel:
Up to 20 lbs.
.688
Ø .313
COLOR
Load Capacity:
Molded / Plastic
SIZE
“A”
MATERIAL
.20” diameter Black
.054” diameter Solid Stainless Steel
.438
Ø .325
PART NO
KNOBS
S1253
S1362
Conduit Size:
Cable Core:
Regular End (R)
6.00
SIZE“B”
Series 55
.438
Ø .250
SIZE“B”
Cable Grade:
Bulkhead End (B)
Metal
Metal
Twist-O-Lock
6.00
.203
.198
.75
6.00
.313 - 32
thread
Vernier
5
SERIES 75 SLIMLINE
VERNIER CABLES
.13
8°
Stroke
Clamp Type Fitting
A DIM
3.6875”
2.3125”
3”
6.6875”
4.3125”
5.1875”
Up to 50 lbs.
up to 3 inches
Travel:
7/16-20 UNF-2A
Stroke
Twist-O-Lock
Vernier
• Other Options:
6
P: 800-500-2380 F: 843-399-5005
8°
CLAMP
10-32 UNF
Ø .255
“C”
“E”fully extended
.875
Travel
.88
Bulkhead Type Fitting
C DIM
1”
4.375”
3”
7.375”
D DIM
.875
Cable
Series
4.00”
5.00”
Travel
75
95
5.00
1”
2”
3”
Regular End (R)
Molded / Plastic
125
Ø .313
5.00
1.00
1”
2”
3”
Plain End (P)
Brass
185
Ø .375
5.00
.125
1”
2”
3”
Clamp End (C)
BULKHEAD
7/16-20 UNF
3.00”
5.875”
.563
C
O
M
B
I
N
A
T
I
O
N
Travel
8°
2”
C
O
M
B
I
N
A
T
I
O
N
“B”
.131
1.16
• Additional End Fittings Available:
“A”
8°
3.3125”
Utility
“D”fully extended
5.375
10-32 UNF-2A
A
N
Y
Vernier control cables are ideal for remote operation of applications needing precise adjustment capabilities. Depressing the center release button allows pushing or pulling the knob to make course travel adjustments. Rotating the knob clockwise extends the output in the finite mode, and counterclockwise retracts. Normal vibration does not affect the micro adjust setting. Various cable end configurations are available to suit a particular application.
1-7/16” diameter knob available as an option (see page 16).
Bulkhead End
"C" Midtravel
"D"
Ø see Cable Grade
Ø see Cable Grade
A
N
Y
• Series 75 / 95 / 125 / 185
LENGTH
6 inches minimum
Bend Radius:
B DIM
1”
2”
Conduit Size:
Operating Load Capacity:
Ø .25
10-32 UNF-2A
.88
Series 75 Slimline
Cable Core:
the transmission of forces in both the push and pull mode of operation. The Series 75 Slimline uses solid wire core in their construction. Solid wire cores can be formed on the ends to
eliminate the need to apply separate fittings or terminations. Any
combination of the end fittings (shown) are available. Bend radii
should be large and routing must be simple to avoid a permanent
set in the core wire.
Clamp End
"A" Midtravel
"B"
Cable Grade:
.130
End
Type
Bulkhead (WB)
Clamp (W)
Bulkhead (WB)
Clamp (W)
Bulkhead (WB)
Clamp (W)
Bulkhead (WB)
Clamp (W)
Bulkhead (WB)
Clamp (W)
Bulkhead (WB)
Clamp (W)
Bulkhead (WB)
Clamp (W)
Bulkhead (WB)
Clamp (W)
Bulkhead (WB)
Clamp (W)
A
B
C
D
1.50”
1.50”
1.50”
1.50”
1.50”
1.50”
1.50”
1.50”
1.50”
1.50”
1.50”
1.50”
1.50”
1.50”
1.50”
1.50”
1.50”
1.50”
1.563”
1.563”
1.563”
1.563”
1.563”
1.563”
1.563”
1.563”
1.563”
1.563”
1.563”
1.563”
1.563”
1.563”
1.563”
1.563”
1.563”
1.563”
3/4 - 16
3/4 - 16
3/4 - 16
3/4 - 16
3/4 - 16
3/4 - 16
3/4 - 16
3/4 - 16
3/4 - 16
3/4 - 16
3/4 - 16
3/4 - 16
3/4 - 16
3/4 - 16
3/4 - 16
3/4 - 16
3/4 - 16
3/4 - 16
4.875”
4.188”
6.875”
6.188”
8.875”
8.188”
5.125”
4.50”
7.125”
6.50”
9.125”
8.50”
5.563”
4.875”
7.563”
6.875”
9.563”
8.875”
Brass
1.00
Shoulder End (S)
Brass
Brass
Glendinning Vernier Control Cables feature:
Plated Steel End Fittings
Plated Steel Slider
Polymer Seals
Nickel Plated Brass Tube
.188
1.00
Bulkhead End (B)
5.00
5.00
3/8 - 24
thread
• Other Options:
— Molded, Plain, Clamp, Shoulder, Bulkhead ends available (contact factory)
P: 800-500-2380 F: 843-399-5005
15
VERNIER CABLES
SERIES 75 / 95
• Series 55 / 75 Slimline
Push / Pull control cables are used in applications that
require the transmission of forces in both the push and
pull mode of operation. The Series 75 / 95 uses solid wire
or armored core in their construction. Any combination of
the end fittings (shown) are available. Bend radii should
be large and routing must be simple to avoid a permanent set in the core wire.
varies
“C”
“A”
“B”
.85
Ø .255
Travel
8°
CLAMP
10-32 UNF-2A
"B"
8°
BULKHEAD
Cable
Series
Travel
55
3”
75
Slimline
1”
2”
3”
End
Type
10-32 UNF-2A
Clamp Type Fitting
A DIM
Stroke
5.1875”
2”
A
B
C
D
varies
(see below)
1.50”
1.563”
5.375”
N/A
Bulkhead (WB)
Clamp (W)
Bulkhead (WB)
Clamp (W)
Bulkhead (WB)
Clamp (W)
1.50”
1.50”
1.50”
1.50”
1.50”
1.50”
1.563”
1.563”
1.563”
1.563”
1.563”
1.563”
5.375”
4.875”
4.188”
6.875”
6.188”
8.875”
8.188”
Conduit Size:
.075” dia. Solid SS
Cable Core:
Travel:
Up to 50 lbs.
up to 4 inches
6.6875”
3”
8.1875”
4”
.102” dia. Armored SS Strand
Up to 75 lbs.
up to 4 inches
8 inches minimum
Bend Radius:
6 inches minimum
B DIM
3.3125”
4.3125”
5.3125”
"C" Midtravel
Ø see Cable Grade
Ø see Cable Grade
"D"
8°
10-32 UNF-2A
Ø .25
10-32 UNF-2A
.88
.859
7/16 - 20
.13
8°
Travel
Series 95
Bulkhead End
"A" Midtravel
Series 75
Clamp End
.131
3/4 - 16
Cable Grade:
7/16-20 UNF-2A
A
AVAI LSO
LABL
E
PRO-X
(SEE
PG .
IN
3)
.88
1.16
Stroke
C DIM
D DIM
7.375”
5.00”
2”
5.875”
4”
8.875”
3”
4.00”
6.00”
Glendinning Control Cables™ feature:
Clamp End
Plated Steel Slider
Polymer Seals
Bulkhead End
Twist-O-Lock
Vernier
Regular End (R)
55 & 75 Slimline - Molded End
see pgs. 5 & 6 for dimensional detail
Plain End (P)
55 - Molded End / 75 Slimline - Brass
Clamp End (C)
Utility
Shoulder End (S)
14
P: 800-500-2380 F: 843-399-5005
Bulkhead End (B)
55 & 75 Slimline - Brass
• Other Options:
P: 800-500-2380 F: 843-399-5005
7
SERIES 125
TWIST-O-LOCK CABLES
the transmission of forces in both the push and pull mode of operation. The Series 125 uses “armored” core in their construction. Any combination of the end fittings (shown) are available.
Bend radii should be large and routing must be simple to avoid
a permanent set in the core wire.
Cable Grade:
Series 125
Conduit Size:
Cable Core:
Load Capacity:
Travel:
Bend Radius:
.125” diameter Stainless Steel Armored Strand
Up to 100 lbs.
up to 4 inches
"B"
“C”
.875
8°
"C" Midtravel
.750
"B"
5/8 - 18
Ø .625
Ø .26
"A" Fully Extended
8°
.410
Ø .500
1/4-28 UNF 2A
Stroke
A DIM
B DIM
7.00”
4.50”
5.50”
2”
3”
8.50”
4”
3.50”
5.50”
5/8-18 UNF 2A
1/4-28 UNF 2A
PRO-X
(SEE
PG .
IN
3)
Stroke
.875
C DIM
D DIM
2”
6.125”
4.125”
4”
9.125”
6.125”
3”
7.625”
Plated Steel Slider
Polymer Seals
BULKHEAD
E
Cable
Series
5.125”
75
95
Travel
1”
2”
3”
Clamp End
Travel
"B"
.579
CL
8°
A
AVAI LSO
LABL
E
CLAMP
.131
Ø .375
1.0
"D"
8°
Clamp Type Fitting
Travel
“D”
Bulkhead End
"A" Midtravel
1.0
Twist-O-Lock control cables are used where an application calls for the ability to “lock in” a specific position. A “T” handle allows movement of the cable
the entire length of the stroke. When the desired position is achieved, simply twist the handle a 1/4 turn to lock the position in place. Used widely in engine stop, engine choke, latch, and valve operations. These cables feature a combination plastic and plated metal body. Permits high torque installations and have a rugged locking collet to provide smooth, positive action. Assorted standard knob options available. (see page 16).
"A" Fully Extended
8 inches minimum
Clamp End
• Series 75 / 95 / 125 / 185
125
Bulkhead End
2”
3”
4”
185
2”
3”
4”
End
Type
Bulkhead (WB)
Clamp (W)
Bulkhead (WB)
Clamp (W)
Bulkhead (WB)
Clamp (W)
Bulkhead (WB)
Clamp (W)
Bulkhead (WB)
Clamp (W)
Bulkhead (WB)
Clamp (W)
Bulkhead (WB)
Clamp (W)
Bulkhead (WB)
Clamp (W)
Bulkhead (WB)
Clamp (W)
A
4.875”
4.187”
6.875”
6.187”
8.875”
8.187”
7.125”
6.50”
9.125”
8.50”
11.125”
10.50”
7.563”
6.875”
9.563”
8.875”
11.563”
10.875”
B
3.00”
2.313”
4.00”
3.313”
5.00”
4.313”
4.125”
3.50”
5.125”
4.50”
6.125”
5.50”
4.375”
3.688”
5.375”
4.688”
6.375”
5.688”
C
D
E
1.25”
6.635”
7/16 - 20
1.25”
6.625”
5/8 - 18
8.625”
1.25”
6.625”
11/16 - 16
8.625”
Glendinning Twist-O-Lock Control Cables feature:
Utility
Twist-O-Lock
• Other Options:
8
• Other Options:
P: 800-500-2380 F: 843-399-5005
Plated Steel Slider
Polymer Seals
Optional Knobs / Handles
Vernier
P: 800-500-2380 F: 843-399-5005
13
TWIST-O-LOCK CABLES
SERIES 185
"A" Fully Extended
3.844
1.12
"B"
.750
Travel
9/16 - 18
.131
Ø .255
Ø .375
Ø .375
5°
1.5
10°
CLAMP
"A" Fully Extended
"B"
5° 10°
BULKHEAD
Travel
55
75
Slimline
End
Type
B
3”
varies
(see below)
N/A
N/A
1”
Bulkhead (WB)
Clamp (W)
Bulkhead (WB)
Clamp (W)
Bulkhead (WB)
Clamp (W)
4.875”
4.188”
6.875”
6.188”
8.875”
8.188”
2”
3”
"C" Midtravel
Regular End (R)
Plain End (P)
Clamp Type Fitting
A DIM
5.875”
2”
7.375”
3”
8.875”
4”
Ø.468
• Other Options:
— Various knobs and handles (see page 16)
12
P: 800-500-2380 F: 843-399-5005
Ø.625
11/16-16 UN 2A
B DIM
3.6875”
4.6875”
5.6875”
Clamp End
A
AVAI LSO
LABL
E IN
PRO-X
(SEE
PG .
3)
Stroke
5/16-24 UNF 2A
C DIM
D DIM
2”
6.5625”
4.375”
4”
9.5625”
6.375”
3”
8.0625”
5.375”
Clamp End (C)
Plated Steel Slider
Polymer Seals
Bulkhead End
Twist-O-Lock
Vernier
Utility
Shoulder End (S)
1.2
.250
10 inches minimum
Bend Radius:
8°
Stroke
3.00”
2.313”
4.00”
3.313”
5.00”
4.313”
up to 4 inches
8°
.875
A
Travel:
Up to 200 lbs.
Load Capacity:
"D"
"B"
Ø .375
Cable
Series
Bulkhead End
5/16-24 UNF 2A
3/8-24 UNF
Conduit Size:
"A" Midtravel
1.2
Travel
Cable Core:
Clamp End
.875
.579
CL
Series 185
Cable Grade:
Bulkhead End (B)
• Other Options:
P: 800-500-2380 F: 843-399-5005
9
UTILITY CABLES
UTILITY CABLES
• Series 75 / 95 / 125 / 185
Utility control cables are used in a variety of applications that require the remote actuation of a device by an operator. All brass components are zinc
plated for superior corrosion resistance and feature a bright finish cap nut with “O” ring seal. Assorted standard knob options available (see page 16).
use
S1407 ends
“F”
“E”
“G”
“F”
varies with stroke
“E”
"A" Fully Extended
"B"
.26
8°
“D”
“C”
1.16
8°
"A" fully extended
"B"
8°
BULKHEAD
.87
Cable
Series
Travel
55
3”
75
Slimline
1”
2”
3”
End
Type
B
C
D
E
F
G
varies
(see below)
N/A
N/A
10-32
5/16 - 32
1.250”
3.875”
2.00”
Bulkhead (WB)
Clamp (W)
Bulkhead (WB)
Clamp (W)
Bulkhead (WB)
Clamp (W)
4.875”
4.1875”
6.875”
6.1875”
8.875”
8.1875”
3.00”
2.3125”
4.00”
3.3125”
5.00”
4.3125”
Cable
Series
75
95
Travel
2”
3”
4”
3/8 - 24
.750”
4.625”
.250”
125
2”
3”
4”
• Additonal End Fittings Available:
185
2”
3”
4”
Regular End (R)
Shoulder End (S)
• Other Options:
10
Plain End (P)
P: 800-500-2380 F: 843-399-5005
BULKHEAD
.87
A
1/4 - 20
CLAMP
.87
.13
"A" Fully Extended
"B"
1.16
8°
CLAMP
“D”
Swivel Clamp & Swivel Bulkhead ends
available in 75 Slimline series ONLY
"A" fully extended
"B"
.26
.87
.13
“C”
“G”
Clamp End (C)
Bulkhead End (B)
End
Type
Bulkhead (WB)
Clamp (W)
Bulkhead (WB)
Clamp (W)
Bulkhead (WB)
Clamp (W)
Bulkhead (WB)
Clamp (W)
Bulkhead (WB)
Clamp (W)
Bulkhead (WB)
Clamp (W)
Bulkhead (WB)
Clamp (W)
Bulkhead (WB)
Clamp (W)
Bulkhead (WB)
Clamp (W)
A
B
6.875”
6.1875”
8.875”
8.1875”
10.875”
10.1875”
7.125”
6.50”
9.125”
8.50”
11.125”
10.50”
7.5625”
6.875”
9.5625”
8.875”
11.5625”
10.875”
4.00”
3.3125”
5.00”
4.3125”
6.00”
5.3125”
4.125”
3.50”
5.125”
4.50”
6.125”
5.50”
4.375”
3.6875”
5.375”
4.6875”
6.375”
5.6875”
C
1/4 - 20
1/4 - 28
5/16 - 24
D
7/16 - 20
1/2 - 20
5/8 - 18
E
1.8125”
1.8125”
1.8125”
1.8125”
1.8125”
1.8125”
2.0625”
2.0625”
2.0625”
2.0625”
2.0625”
2.0625”
1.25”
1.25”
1.25”
1.25”
1.25”
1.25”
F
4.50”
G
3.30”
6.50”
4.312”
3.80”
6.938”
6.875”
.500”
8.875”
Glendinning Utility Control Cables feature:
Plated Steel Slider
Polymer Seals
• Other Options:
P: 800-500-2380 F: 843-399-5005
11
UTILITY CABLES
UTILITY CABLES
• Series 75 / 95 / 125 / 185
use
S1407 ends
“F”
“E”
“G”
“F”
varies with stroke
“E”
"A" Fully Extended
"B"
.26
8°
“D”
“C”
1.16
8°
"A" fully extended
"B"
8°
BULKHEAD
.87
Cable
Series
Travel
55
3”
75
Slimline
1”
2”
3”
End
Type
B
C
D
E
F
G
varies
(see below)
N/A
N/A
10-32
5/16 - 32
1.250”
3.875”
2.00”
Bulkhead (WB)
Clamp (W)
Bulkhead (WB)
Clamp (W)
Bulkhead (WB)
Clamp (W)
4.875”
4.1875”
6.875”
6.1875”
8.875”
8.1875”
3.00”
2.3125”
4.00”
3.3125”
5.00”
4.3125”
Cable
Series
75
95
Travel
2”
3”
4”
3/8 - 24
.750”
4.625”
.250”
125
2”
3”
4”
• Additonal End Fittings Available:
185
2”
3”
4”
Regular End (R)
Shoulder End (S)
• Other Options:
10
Plain End (P)
P: 800-500-2380 F: 843-399-5005
BULKHEAD
.87
A
1/4 - 20
CLAMP
.87
.13
"A" Fully Extended
"B"
1.16
8°
CLAMP
“D”
Swivel Clamp & Swivel Bulkhead ends
available in 75 Slimline series ONLY
"A" fully extended
"B"
.26
.87
.13
“C”
“G”
Clamp End (C)
Bulkhead End (B)
End
Type
Bulkhead (WB)
Clamp (W)
Bulkhead (WB)
Clamp (W)
Bulkhead (WB)
Clamp (W)
Bulkhead (WB)
Clamp (W)
Bulkhead (WB)
Clamp (W)
Bulkhead (WB)
Clamp (W)
Bulkhead (WB)
Clamp (W)
Bulkhead (WB)
Clamp (W)
Bulkhead (WB)
Clamp (W)
A
B
6.875”
6.1875”
8.875”
8.1875”
10.875”
10.1875”
7.125”
6.50”
9.125”
8.50”
11.125”
10.50”
7.5625”
6.875”
9.5625”
8.875”
11.5625”
10.875”
4.00”
3.3125”
5.00”
4.3125”
6.00”
5.3125”
4.125”
3.50”
5.125”
4.50”
6.125”
5.50”
4.375”
3.6875”
5.375”
4.6875”
6.375”
5.6875”
C
1/4 - 20
1/4 - 28
5/16 - 24
D
7/16 - 20
1/2 - 20
5/8 - 18
E
1.8125”
1.8125”
1.8125”
1.8125”
1.8125”
1.8125”
2.0625”
2.0625”
2.0625”
2.0625”
2.0625”
2.0625”
1.25”
1.25”
1.25”
1.25”
1.25”
1.25”
F
4.50”
G
3.30”
6.50”
4.312”
3.80”
6.938”
6.875”
.500”
8.875”
Glendinning Utility Control Cables feature:
Plated Steel Slider
Polymer Seals
• Other Options:
P: 800-500-2380 F: 843-399-5005
11
TWIST-O-LOCK CABLES
SERIES 185
"A" Fully Extended
3.844
1.12
"B"
.750
Travel
9/16 - 18
.131
Ø .255
Ø .375
Ø .375
5°
1.5
10°
CLAMP
"A" Fully Extended
"B"
5° 10°
BULKHEAD
Travel
55
75
Slimline
End
Type
B
3”
varies
(see below)
N/A
N/A
1”
Bulkhead (WB)
Clamp (W)
Bulkhead (WB)
Clamp (W)
Bulkhead (WB)
Clamp (W)
4.875”
4.188”
6.875”
6.188”
8.875”
8.188”
2”
3”
"C" Midtravel
Regular End (R)
Plain End (P)
Clamp Type Fitting
A DIM
5.875”
2”
7.375”
3”
8.875”
4”
Ø.468
• Other Options:
12
P: 800-500-2380 F: 843-399-5005
Ø.625
11/16-16 UN 2A
B DIM
3.6875”
4.6875”
5.6875”
Clamp End
A
AVAI LSO
LABL
E IN
PRO-X
(SEE
PG .
3)
Stroke
5/16-24 UNF 2A
C DIM
D DIM
2”
6.5625”
4.375”
4”
9.5625”
6.375”
3”
8.0625”
5.375”
Clamp End (C)
Plated Steel Slider
Polymer Seals
Bulkhead End
Twist-O-Lock
Vernier
Utility
Shoulder End (S)
1.2
.250
10 inches minimum
Bend Radius:
8°
Stroke
3.00”
2.313”
4.00”
3.313”
5.00”
4.313”
up to 4 inches
8°
.875
A
Travel:
Up to 200 lbs.
Load Capacity:
"D"
"B"
Ø .375
Cable
Series
Bulkhead End
5/16-24 UNF 2A
3/8-24 UNF
Conduit Size:
"A" Midtravel
1.2
Travel
Cable Core:
Clamp End
.875
.579
CL
Series 185
Cable Grade:
Bulkhead End (B)
• Other Options:
P: 800-500-2380 F: 843-399-5005
9
SERIES 125
TWIST-O-LOCK CABLES
Cable Grade:
Series 125
Conduit Size:
Cable Core:
Load Capacity:
Travel:
Bend Radius:
Up to 100 lbs.
up to 4 inches
"B"
“C”
.875
8°
"C" Midtravel
.750
"B"
5/8 - 18
Ø .625
Ø .26
"A" Fully Extended
8°
.410
Ø .500
1/4-28 UNF 2A
Stroke
A DIM
B DIM
7.00”
4.50”
5.50”
2”
3”
8.50”
4”
3.50”
5.50”
5/8-18 UNF 2A
1/4-28 UNF 2A
PRO-X
(SEE
PG .
IN
3)
Stroke
.875
C DIM
D DIM
2”
6.125”
4.125”
4”
9.125”
6.125”
3”
7.625”
Plated Steel Slider
Polymer Seals
BULKHEAD
E
Cable
Series
5.125”
75
95
Travel
1”
2”
3”
Clamp End
Travel
"B"
.579
CL
8°
A
AVAI LSO
LABL
E
CLAMP
.131
Ø .375
1.0
"D"
8°
Clamp Type Fitting
Travel
“D”
Bulkhead End
"A" Midtravel
1.0
"A" Fully Extended
8 inches minimum
Clamp End
• Series 75 / 95 / 125 / 185
125
Bulkhead End
2”
3”
4”
185
2”
3”
4”
End
Type
Bulkhead (WB)
Clamp (W)
Bulkhead (WB)
Clamp (W)
Bulkhead (WB)
Clamp (W)
Bulkhead (WB)
Clamp (W)
Bulkhead (WB)
Clamp (W)
Bulkhead (WB)
Clamp (W)
Bulkhead (WB)
Clamp (W)
Bulkhead (WB)
Clamp (W)
Bulkhead (WB)
Clamp (W)
A
4.875”
4.187”
6.875”
6.187”
8.875”
8.187”
7.125”
6.50”
9.125”
8.50”
11.125”
10.50”
7.563”
6.875”
9.563”
8.875”
11.563”
10.875”
B
3.00”
2.313”
4.00”
3.313”
5.00”
4.313”
4.125”
3.50”
5.125”
4.50”
6.125”
5.50”
4.375”
3.688”
5.375”
4.688”
6.375”
5.688”
C
D
E
1.25”
6.635”
7/16 - 20
1.25”
6.625”
5/8 - 18
8.625”
1.25”
6.625”
11/16 - 16
8.625”
Glendinning Twist-O-Lock Control Cables feature:
Utility
Twist-O-Lock
• Other Options:
8
• Other Options:
P: 800-500-2380 F: 843-399-5005
Plated Steel Slider
Polymer Seals
Vernier
P: 800-500-2380 F: 843-399-5005
13
VERNIER CABLES
SERIES 75 / 95
Push / Pull control cables are used in applications that
require the transmission of forces in both the push and
pull mode of operation. The Series 75 / 95 uses solid wire
or armored core in their construction. Any combination of
the end fittings (shown) are available. Bend radii should
be large and routing must be simple to avoid a permanent set in the core wire.
varies
“C”
“A”
“B”
.85
Ø .255
Travel
8°
CLAMP
10-32 UNF-2A
"B"
8°
BULKHEAD
Cable
Series
Travel
55
3”
75
Slimline
1”
2”
3”
End
Type
10-32 UNF-2A
Clamp Type Fitting
A DIM
Stroke
5.1875”
2”
A
B
C
D
varies
(see below)
1.50”
1.563”
5.375”
N/A
Bulkhead (WB)
Clamp (W)
Bulkhead (WB)
Clamp (W)
Bulkhead (WB)
Clamp (W)
1.50”
1.50”
1.50”
1.50”
1.50”
1.50”
1.563”
1.563”
1.563”
1.563”
1.563”
1.563”
5.375”
4.875”
4.188”
6.875”
6.188”
8.875”
8.188”
Conduit Size:
.075” dia. Solid SS
Cable Core:
Travel:
Up to 50 lbs.
up to 4 inches
6.6875”
3”
8.1875”
4”
.102” dia. Armored SS Strand
Up to 75 lbs.
up to 4 inches
8 inches minimum
Bend Radius:
6 inches minimum
B DIM
3.3125”
4.3125”
5.3125”
"C" Midtravel
Ø see Cable Grade
Ø see Cable Grade
"D"
8°
10-32 UNF-2A
Ø .25
10-32 UNF-2A
.88
.859
7/16 - 20
.13
8°
Travel
Series 95
Bulkhead End
"A" Midtravel
Series 75
Clamp End
.131
3/4 - 16
Cable Grade:
7/16-20 UNF-2A
A
AVAI LSO
LABL
E
PRO-X
(SEE
PG .
IN
3)
.88
1.16
Stroke
C DIM
D DIM
7.375”
5.00”
2”
5.875”
4”
8.875”
3”
4.00”
6.00”
Clamp End
Plated Steel Slider
Polymer Seals
Bulkhead End
Twist-O-Lock
Vernier
Regular End (R)
Plain End (P)
Clamp End (C)
Utility
Shoulder End (S)
14
P: 800-500-2380 F: 843-399-5005
Bulkhead End (B)
• Other Options:
P: 800-500-2380 F: 843-399-5005
7
SERIES 75 SLIMLINE
VERNIER CABLES
.13
8°
Stroke
Clamp Type Fitting
A DIM
3.6875”
2.3125”
3”
6.6875”
4.3125”
5.1875”
Up to 50 lbs.
up to 3 inches
Travel:
7/16-20 UNF-2A
Stroke
Twist-O-Lock
Vernier
• Other Options:
6
P: 800-500-2380 F: 843-399-5005
8°
CLAMP
10-32 UNF
Ø .255
“C”
.875
Travel
.88
C DIM
1”
4.375”
3”
7.375”
D DIM
.875
Cable
Series
4.00”
5.00”
Travel
75
95
5.00
1”
2”
3”
Regular End (R)
Molded / Plastic
125
Ø .313
5.00
1.00
1”
2”
3”
Plain End (P)
Brass
185
Ø .375
5.00
.125
1”
2”
3”
Clamp End (C)
BULKHEAD
7/16-20 UNF
3.00”
5.875”
.563
C
O
M
B
I
N
A
T
I
O
N
Travel
8°
2”
C
O
M
B
I
N
A
T
I
O
N
“B”
.131
1.16
“A”
8°
3.3125”
Utility
5.375
10-32 UNF-2A
A
N
Y
1-7/16” diameter knob available as an option (see page 16).
Bulkhead End
"C" Midtravel
"D"
Ø see Cable Grade
Ø see Cable Grade
A
N
Y
• Series 75 / 95 / 125 / 185
LENGTH
6 inches minimum
Bend Radius:
B DIM
1”
2”
Conduit Size:
Ø .25
10-32 UNF-2A
.88
Series 75 Slimline
Cable Core:
the transmission of forces in both the push and pull mode of operation. The Series 75 Slimline uses solid wire core in their construction. Solid wire cores can be formed on the ends to
eliminate the need to apply separate fittings or terminations. Any
combination of the end fittings (shown) are available. Bend radii
should be large and routing must be simple to avoid a permanent
set in the core wire.
Clamp End
"A" Midtravel
"B"
Cable Grade:
.130
End
Type
Bulkhead (WB)
Clamp (W)
Bulkhead (WB)
Clamp (W)
Bulkhead (WB)
Clamp (W)
Bulkhead (WB)
Clamp (W)
Bulkhead (WB)
Clamp (W)
Bulkhead (WB)
Clamp (W)
Bulkhead (WB)
Clamp (W)
Bulkhead (WB)
Clamp (W)
Bulkhead (WB)
Clamp (W)
A
B
C
D
1.50”
1.50”
1.50”
1.50”
1.50”
1.50”
1.50”
1.50”
1.50”
1.50”
1.50”
1.50”
1.50”
1.50”
1.50”
1.50”
1.50”
1.50”
1.563”
1.563”
1.563”
1.563”
1.563”
1.563”
1.563”
1.563”
1.563”
1.563”
1.563”
1.563”
1.563”
1.563”
1.563”
1.563”
1.563”
1.563”
3/4 - 16
3/4 - 16
3/4 - 16
3/4 - 16
3/4 - 16
3/4 - 16
3/4 - 16
3/4 - 16
3/4 - 16
3/4 - 16
3/4 - 16
3/4 - 16
3/4 - 16
3/4 - 16
3/4 - 16
3/4 - 16
3/4 - 16
3/4 - 16
4.875”
4.188”
6.875”
6.188”
8.875”
8.188”
5.125”
4.50”
7.125”
6.50”
9.125”
8.50”
5.563”
4.875”
7.563”
6.875”
9.563”
8.875”
Brass
1.00
Shoulder End (S)
Brass
Brass
Glendinning Vernier Control Cables feature:
Plated Steel Slider
Polymer Seals
.188
1.00
Bulkhead End (B)
5.00
5.00
3/8 - 24
thread
• Other Options:
P: 800-500-2380 F: 843-399-5005
15
CABLE ACCESSORIES
SERIES 55
• Knobs / T-Handles
A variety of knobs and handles are available. Knobs and handles are not included with cables and must be ordered separately. Order using part number — remember to specify nomenclature (if needed).
the transmission of forces in both the push and pull mode of operation. The Series 55 uses solid wire core in their construction.
Solid wire cores can be formed on the ends to eliminate the need
to apply separate fittings or terminations. Any combination of the
end fittings (shown) are available. Bend radii should be large
and routing must be simple to avoid a permanent set in the core
wire.
6.00
Plain End (P)
Molded / Plastic
.938
6.00
.130
Clamp End (C)
Molded / Plastic
6.00
.203
XXXXX
XXXXX
S1407
S1407
XXXXX
XXXXX
XXXXX
XXXXX
Plastic
Black
Red
Plastic
Plastic
Plastic
Aluminum
T-HANDLES
S1382
Plastic
S1433
Plastic
S1019
S1396
Aluminum
Black
Red
Black
Red
Black
Red
Chrome
Black
Red
Black
Red
Chrome
1.00” dia.
2.00” dia.
1.125” dia. scalloped
2.00” dia.
2.00” dia.
3.00” dia.
SIZE B
.75”
XXXXX
.984”
1/4 - 20
XXXXX
XXXXX
XXXXX
XXXXX
XXXXX
XXXXX
XXXXX
1.00”
2.375”
1.375”
2.00”
XXXXX
NOMENCLATURE
Plain or specify
(see below)
XXXXX
Plain or specify
(see below)
1.625”
16
6.00
Ø .250
Molded / Plastic
A
N
Y
C
O
M
B
I
N
A
T
I
O
N
A
N
Y
C
O
M
B
I
N
A
T
I
O
N
6.00
P: 800-500-2380 F: 843-399-5005
Ø .325
Molded / Plastic
.938
Clamp End (C)
6.00
.130
Ø .313
Molded / Plastic
6.00
Tab End (T)
.203
Molded / Plastic
.437
.50
Molded / Plastic
Bulkhead End (B)
Utility
Plain End (P)
Shoulder End (S)
Molded / Plastic
.75
Available nomenclatures: Stop / Shutoff / Throttle / Choke / Open / Close / Emergency Stop / PTO / Raise / Fuel Shutoff / Engine Stop
P: 800-500-2380 F: 843-399-5005
6.00
4 inches minimum
Regular End (R)
Shoulder End (S)
.313 - 32
thread
XXXXX
1/4 - 20
.50
.203
.198
XXXXX
Tab End (T)
Molded / Plastic
.437
6.00
10 - 32
XXXXX
2.00”
3.00”
THREAD
Bend Radius:
up to 3 inches
.688
SIZE“A”
SIZE A
Travel:
Up to 20 lbs.
.688
Ø .313
COLOR
Load Capacity:
Molded / Plastic
SIZE
“A”
MATERIAL
.438
Ø .325
PART NO
KNOBS
S1253
S1362
Conduit Size:
Cable Core:
Regular End (R)
6.00
SIZE“B”
Series 55
.438
Ø .250
SIZE“B”
Cable Grade:
Bulkhead End (B)
Metal
Metal
Twist-O-Lock
6.00
.203
.198
.75
6.00
.313 - 32
thread
Vernier
5
SERIES 55 LIGHT
CABLE ACCESSORIES
• Pull / Pull Cables
Pull / Pull control cables are used in applications that require the
transmission of forces in the pull mode of operation. The Series
55 Light uses stranded wire core in their construction. Stranded
wire cores can be fitted with various end fittings or terminations.
Any combination of the end fittings (shown) are available.
• Hardware
Cable Grade:
Series 55 Light
Conduit Size:
.20” diameter Black (Bowden or Longlay Reinforced)
.047-.070 dia. Strand
Cable Core:
Load Capacity:
Up to 20 lbs.
Bend Radius:
recommended 4 inches minimum
A variety of hardware is available and is generally not supplied with your purchase unless otherwise indicated.
A
D
any
Travel:
A
D
CA-29104
CA-29108
B
CA-31126
B
CA-31509
CA-31532
CA-36733
B
BALL JOINTS
PART NO
A
30 Series
CA-31126 0.90625”
40 Series
CA-29104 0.96875”
60 Series
CA-29108
1.125”
"A"
M6x.75
Turnbuckles
Bent Tubes
• Adjustable •
E
B
C
D
E
0.500”
0.5625”
10 - 32
.250 - 28
0.46875”
0.5625”
.3125 - 28
.3125 - 28
0.53125”
0.6875”
.250 - 24
.250 - 24
F
D
D
A
C
E
E
A
"L"
"A"
TERMINAL EYES
PART NO
A
B
30 Series
CA-31980 0.90625” 0.225”
40 Series
CA-37639 0.90625” 0.225”
1.375” 0.3125”
1.375” 0.3125”
60 Series
1.375” 0.3125”
Molded Ø 1
Nylon
3/8-24 UNF Molded Plastic
• Light-Duty Choke •
"A"
"L"
.19
Diecast
1/4-20 UNC
Swaged Metal
• Eyelet •
"L"
Swaged
Eyelets
"A"
Molded
Nylon
Molded
Plastic
B
50202
50202-43C
.75
• Snap-In •
Diecast
B
C
D
E
0.9375” 0.53125” 0.3125”
0.9375” 0.53125” 0.3125”
0.750”
0.500” 0.3125”
0.750”
0.500”
0.250”
0.750”
E
0.500”
"L"
"L"
Plastic Lever Assembly
• Other Options:
• Lever Actuator Assembly •
4
"A"
Molded
Plastic
"A"
• Clip In •
Sphere
Diecast
P: 800-500-2380 F: 843-399-5005
CLEVIS
PART NO
30 Series
CA-31800
CA-31125
40 Series
CA-29025
60 Series
D
CLAMPS & SHIMS
PART NO
A
30 Series
CA-31509
1.00”
CA-31538
1.50”
CA-28020
0.375”
40 Series
CA-31532
1.00”
CA-31538
1.50”
CA-28018
0.500”
60 Series
CA-36733
1.25”
1.75”
CA-28019
0.5625”
B
C
D
E
0.375”
1.00”
10 - 32
0.203125”
0.500”
0.500”
0.09375”
1.50”
0.203125”
0.500”
1.00”
10 - 32
0.21875”
0.500”
0.500”
0.09375”
1.50”
0.203125”
0.5625”
1.25”
10 - 32
0.28125”
0.625”
0.625”
0.09375”
1.75”
0.28125”
10 - 32
0.250 - 28
0.250 - 28
0.250 - 28
0.3125” 0.3125 - 24
CA-35531
D
D
E
C
E
C
CA-36174
B
B
A
CABLE HOOK CLIP
PART NO
A
CA-36174
1.00”
CA-35531
1.25”
D
Diecast
CA-31538
F
CA-31800
CA-31125
CA-29025
A
A
B
C
Diecast
A
D
C
E
F
M6x.75
Typ
A
C
C
E
Ø .31
B
B
Swaged Eyelets
"L"
KIT
E
C
A
B
0.500”
0.750”
C
0.375”
0.375”
D
1.50”
1.50”
E
0.203125”
0.203125”
B
C
C
A
B
C
D
E
1.5625”
2.00”
1.00
1.25”
0.1875”
0.28125”
0.1875”
0.250”
10 - 32
10 - 32
2.00”
1.25”
0.28125”
0.250”
.250 - 28
2.25”
1.4375”
0.34375”
0.3125”
.3125 - 24
P: 800-500-2380 F: 843-399-5005
B
D
A
ROD END BALL LINK
PART NO
A
CA-99204
1.6875”
B
0.375”
C
0.250”
D
0.250 - 28
17
A
B
C
E
A
C
D
GLENDINNING CONTROL CABLES ADVANTAGES
A
B
Not All Control Cables Are Created Equal!
C
B
CA-300965
D
E
D
CA-31539
CA-31537
CA-47641
PIVOTS
PART NO
A
30 Series
CA-31539 0.71875”
0.65625”
0.8125”
40 Series
CA-31537
0.875”
B
C
D
E
0.375”
0.375”
0.375”
0.191”
0.28125”
0.4375”
0.250”
0.250”
0.250”
10 - 32
0.109375”
0.109375”
0.500”
0.203125”
0.250”
0.250 - 28
PIVOT PINS - for terminal eyes
PART NO
A
B
CA-300965
1.4375”
0.65625”
C
0.3125”
D
0.250 - 28
C
A
STOP COLLARS
PART NO
A
CA-37693
0.375”
C
E
CA-33704
B
A
CLIPS
PART NO
CA-33704
A
1.3125”
B
0.375”
C
8 -32
D
0.09375”
D
B
0.375”
C
0.625”
D
0.265625”
• Core Choice — Depending on your application, Glendinning offers 2
types of core - Standard Grade or High Performance Armored Core.
“Standard” Solid Wire Core — Consists of polished stainless
steel solid wire. This core is suitable for most standard control
cable uses and applications. Solid wire cores can be formed on
the ends to eliminate the need for end fittings.
D
B
In an effort to increase profits, many companies have sacrificed the long
term advantages of efficient performance for the short term benefit of
lower costs. That’s a sacrifice we’re not willing to make. Glendinning Control Cables feature:
E
0.28125”
CUSTOM / SPECIALTY
• Accelerator Cables — Accelerator cables are designed to link the accelerator pedal to the engine’s carburator. Designed for use in small trucks, construction equipment, material handling, and off-highway uses. Cables are
manufactured with
• Markers — Extra heavy-duty markers designed to aid in locating the edge of a bumper or plow blade. Full com-
plement steel long lay wires surround a center conduit which greatly increases flexibility in sub-zero temperatures. Abrasion resistant HDPE outer jacket is manufactured from low temperature nylon for extreme weatherability. Rounded
molded tip prevents snow and ice buildup while ensuring a superior moisture seal. Corrosion resistant 300 Series
stainless steel end fittings for longevity. Options include: size of marker, color of outer jacket and type of packaging.
Company name imprint available on request.
• Wire Rope Assemblies — Wire rope assemblies are manufactured using aircraft quality wire rope. All wire
fittings, either staked, diecasted, or swagged are secured to withstand 60% of the breaking strength of the wire rope.
A complete line of eyelets, threaded studs, ball slugs and loops are available for any application.
• Colors — Want your control cable to stand out? We can produce cables with colored conduit and fittings for your
special needs. Subject to minimum quantities — call for specific details.
“PRO-X™” Armored Core — Highly efficient “armored” core
technology is the best in the industry. Stainless steel flat wire
swaged over stainless steel stranded cable and burnished to a
smooth, close tolerance finish, provides high flexibility and incredible strength. Choose PRO-X™ Armored Core for:
— Stiffer Core - simply put it “pushes” a load better.
— More flexiblity - doesn’t bog down with multiple bends.
— Heavy-duty - for applications that require robust control.
— Minimizes drag - while it maximizes performance.
• Inner Liner — Polymer liners minimize friction for maximum efficiency.
The inside diameter is precisely controlled to minimize lost motion and
premature wear, problems that seem to plague most “splined” or “grooved”
liners.
• Conduit — A “full complement” of reinforcing wires are placed in a long
lay pattern to protect the liner and inner core. Close tolerances between
the cable core and conduit result in minimal deflections during cable operation, assuring precise controlling action to the operator.
Standard Cable Cross Section
Solid Stainless
Steel Wire
Core
High Density
Polymer
Outer Jacket
Resists
Abrasions
High Density
Polymer Liner
Lay Wires
P ro- X ™ Cable Cross Section
Armored
Core
• Outer Jacket – Heavy duty, high density non-hygroscopic polymer jacket
is extruded onto the conduit for maximum cable strength and abrasion resistance.
• End Fittings / Sliders – Quality components are used throughout to ensure maximum corrosion resistance.
— 300 series stainless steel
— Nickel-plated brass
— Zinc-plated steel
— Brass
• Seals & Boots – Durable polymer seals are used to prevent moisture
and contaminents from entering the cable.
High Density
Polymer
Outer Jacket
Resists
Abrasions
High Density
Polymer Liner
Lay Wires
Specifications contained in this catalog are
subject to change without notice
18
P: 800-500-2380 F: 843-399-5005
P: 800-500-2380 F: 843-399-5005
3
TABLE OF CONTENTS
TERMS & CONDITIONS
• Glendinning Control Cable Advantages............................................................................................................................. 3
Series 55 Light......................................................................................................................................................................4
Series 55...............................................................................................................................................................................5
Series 75 Slimline .................................................................................................................................................................6
Series 75 / 95........................................................................................................................................................................7
Series 125.............................................................................................................................................................................8
Series 185.............................................................................................................................................................................9
• Utility Cables
Series 55 / 75 Slimline ........................................................................................................................................................10
Series 75 / 95 / 125 / 185....................................................................................................................................................11
• Twist-O-Lock Cables
Series 55 / 75 Slimline ........................................................................................................................................................12
Series 75 / 95 / 125 / 185....................................................................................................................................................13
• Vernier Cables
Series 55 / 75 Slimline ........................................................................................................................................................14
Series 75 / 95 / 125 / 185....................................................................................................................................................15
• Cable Accessories
Knobs / T-Handles ..............................................................................................................................................................16
Hardware ............................................................................................................................................................................17
• Custom / Specialty Cables
Specialty Cables .................................................................................................................................................................18
— Accelerator Cables
— Markers
— Wire Rope Assemblies
— Colored Control Cables
• Terms & Conditions............................................................................................................................................................ 19
2
P: 800-500-2380 F: 843-399-5005
• Cancellations or Order Changes: Orders in process may be cancelled only with Glendinning’s written consent and upon payment of cancellation charges. Customer must allow 60 days for changes in scheduled releases to existing orders and agree to an appropriate adjustment in price,
if any.
• Credit Terms: To those customers or prospective customers whose financial condition meets the credit criteria of Glendinning, terms are Net 30
days from date of invoice. All past due accounts are subject to a charge of 1.25% per month (15% per annum). Should shipment be held for convenience of purchaser beyond the date originally specified, Glendinning reserves the right to bill the goods as if shipped on the specified date. Warehouse
charges incident to such delay shall be billed against the order at a rate of 1.25% per month.
• General: The terms and conditions herewith shall not be affected by those of any customer’s order which conflicts with or is in addition to Glendin-
ning’s terms and conditions unless specifically agreed to in writing by a duly authorized official of Glendinning.
• Laws: Acceptance of any customer’s order does not obligate Glendinning beyond the normal requirements of Local, State and Federal laws and executive orders. Glendinning expressly disclaims assumptions of any of the customer’s obligation under such laws.
• Prices: Prices are based on quantities and frequency of releases as described in quotation. Price may be affected if order quantity is less than quoted
or if number of releases is greater than specified. Quotations must be referenced on the order to assure correct pricing. Glendinning reserves the right
to adjust prices on orders where releases are not specified within a reasonable length of time and then only to the extent of material and labor increases.
• Quotations: All quotations are subject to written acceptance by purchaser within the period of time specified from the date thereof and are limited
to items and quantities listed. Glendinning reserves the right to change or cancel such quotations at anytime prior to receipt of customer’s order.
• Shipments: All shipments are made F.O.B. Conway, SC, freight collect. Unless otherwise specified, Glendinning will ship via common motor car-
rier or other available means as deemed equitable. All cables and components shall be packed in suitable containers and at the discretion of Glendinning unless special packaging instructions are agreed to at time of order. When different items are shipped in same carton, they will be marked and
separated for ease of inspection. Full title and risk of loss shall pass to customer upon departure of products from F.O.B. point. All parcel post shipments
are insured at customer’s expense. Glendinning shall be permitted to make partial shipments and invoice accordingly.
• Taxes: Customer agrees to reimburse Glendinning for any taxes paid or collected as a result of fulfilling customer’s order.
• Tools: Unless otherwise agreed to in advance, charges made to customer for dies, tools and other equipment do not constitute customer owner-
ship or exclusive production rights, nor do they grant the customer the right to remove such tools from Glendinning’s plant. Glendinning shall own all
tools and assumes risk of damage or loss and will maintain such tools in good condition.
• Variations: Unless otherwise specified in writing, the following variations shall constitute satisfactory compliance with order specifications:
Lots of 10 to 99 units — (plus / minus) 10%
Lots of 100 units or more — (plus / minus) 5%
• Warranty: For three (3) years from date of shipment of this product from our plant, Glendinning warrants such product against defective material
or workmanship (but not against damage caused by accident or improper use after such shipment). Glendinning will, at its option, repair, replace or issue
credit for any of its products discovered to be defective within a three year period; provided that (a) Glendinning is notified within two weeks after discovery of such defect (b) the original product is immediately returned to Glendinning transportation charges prepaid and (c) Glendinning’s examination
shall disclose to its satisfaction that such defect has not been caused by improper use or accident after shipment of such product. No warranty applies
to a product’s fitness for specific application. It will be so stated when a product is generally suited for an application. However, since we control neither specific installations nor specific use, we warrant nothing beyond the specifications per print. Glendinning makes no other warranties, expressed
or implied.
P: 800-500-2380 F: 843-399-5005
19
OTHER PRODUCTS BY GLENDINNING...
ELECTRONIC ENGINE CONTROLS for J1939
Glendinning manufactures Electronic Engine Controls for all applications. With devices like actuators and control panels we’ll help you to control your electronic engines. Give our techs a call and let us show you how we can help. Features include:
INDUSTRIAL CONTROL CABLES
• Interface with J1939 engine databus.
• Speed Control knob controls engine speed between Idle and WOT.
• Power light indicates bus power is available.
• Comm Link light indicates that throttle control interface is in contact with engine.
• Other control options available!
CABLEMASTER™ & HOSEMASTER™ — CORD & HOSE REELS
Glendinning also manufactures a complete line of cord and hose reels for a variety of
of applications. All Glendinning cord and hose reels consist of the finest grade materials and workmanship. Features include:
Cablemaster™ Cord Reels
• Zero-effort pull out force & electric retraction of cord / hose reduces
physical strain!
• Compact size — frees up valuable storage space!
• Reel capacity varies depending on type of cord / hose used!
• Easy to install!
• Robust construction — built to last!
Hosemaster™ Hose Reels
Distributed by:
740 Century Circle • Conway, SC 29526 • Telephone: (843) 399-6146 • Facsimile: (843) 399-5005 • www.glendinningprods.com
Made in the USA
SML-CAT-IND
Agriculture • Automotive • Construction • Material Handling • Specialty / Custom

industrial control cables

Transcription

Similar documents

Bangstick 90 Degree NFDD Delivery Pole

JLT 8` Panel Clamp

Flexilens on Clamp

SubConn® Circular

kutrimmer 1043 tabletop trimmer

Center Punch Clamp Production Tool

6601 series - Preco Safety

Steering Stem Installation Yamaha YFZ450 and

why do the pros trust trystar