IFO6861 - Enware

Ifo Sign Toilet Increased Height - S Trap
IFO6861
Free standing toilet with 460mm seat height for those who
cannot easily sit down or stand up - especially
for hip and knee support.
FEATURES
• 460 mm seat height
(excluding seat)
• 95O cistern to pan angle
• Cistern complies with all
angles thrust test of 1100 N
• Pan load rated to 400 kg
• Chromed flush button for
improved visibility
• Seamless cistern as back
and side transfer support
• Increased foot print for
enhanced stability
• Allows for undisturbed
coving seal
• Tested to comply with 90%
of AU commonly used
commode chairs
• WELS 4 star rated
(4.5/3L Flush)
• Fully glazed on back and
inside rim to avoid
bacteria growth
• Integrated cistern is a
deemed-to-satisfy solution
which serves as a backrest
“on” the accessible toilet as
required in AS1428.1-2009
• Provides 100%
consistency and reliability
as combined WC and
back support.
*Seat not included
All pans are to be fixed using high grade anti-bacterial silicone of
appropriate colour. Where exposed mounting holes are provided,
316 stainless steel screws are to be used.
Raised Height
Button and Pressalit
Care Toilet Seats &
Support Arms shown
here are not supplied
as standard, but can
be ordered separately
- see options
Product Code
IFO6861
IFO Increased Height Toilet - S Trap
OPTIONS
Raised Flush Button
IFO98308
Pressalit Hard Seat - white
IFO724D55999
Pressalit Sign Soft Close Seat - white
IFO624000-DO39999
IFO553000-BD1999
Pressalit Sign Hard Seat No Lid - white
Pressalit Sign Hard Seat - anthracite grey IFO554112-BD1999
Pressalit Sign Hard Seat - white
IFO554000-BD1999
Arm Supports
IFO98125
Fresh Sticks - 10 packets of 5 sticks
IFO94568
Floor Anchor
IFO98015
Back View
Side View
355
650
95
900
400-455
155
40
460
20
The more
stars the more
water efficient
Ø102
A joint government and industry program
Licence No. 0058
4.5
3
litres per full flush
litres per half flush
3.3 litres per average flush
When tested in accordance with Standard AS/NZS 6400
For more information and to compare
products, refer to:
www.waterrating.gov.au
AS 1172.1
AS 1172.2
WMKA21026
IAPMO R&T
Certifikate Nr. 2004-SKM-AE-825
ISO 14001:2004
Certifikate Nr. 2004-SKM-AQ-2054
ISO 9001:2000
Version: Sep 15
Call 1300 369 273
www.enware.com.au/ifo
Enware Australia Pty Limited
9 Endeavour Rd Caringbah NSW 2229 Australia
Ph: 02 8536 4000 Fax: 02 8556 4055
100 Min.*
*For more details on the set out, refer to separate document Ifo
WC Set Out TDS
Ifo Toilet - S Trap - WC Set Out
1428.1 set out
in accordance with AS 1428.1 1:2009
800
165
165
95˚
40
Distance from finished wall to front of pan
800mm
Distance from finished wall to back of pan
130mm
Distance from finished wall to centre of outlet
200mm
Finished wall
surface
125
Min 200
50 –70
200
Finished wall
Ø 100 DWV
45° Corner Set up
with no arm support system
Finished Floor
280
Min.
280 Min.
Institutional/Health set out
Set out typical for hospitals which allows for
substantial air circulation and free coving
775
40
Distance from finished wall to front of pan
775mm
Distance from finished wall to back of pan
100mm
Distance from finished wall to centre of outlet
170mm
100
Min 170
170
50 –70
Finished wall
Ø 100 DWV
Finished Floor
Minimum set out
The minimum to still allow air circulation behind
the WC pan
700
40
30
Distance from finished wall to front of pan
700mm
Distance from finished wall to back of pan
30mm
Distance from finished wall to centre of outlet
100mm
Min 100
100
50 –70
Finished Floor
Version: Jan 16
Call 1300 369 273
www.enware.com.au/ifo
Enware Australia Pty Limited
9 Endeavour Rd Caringbah NSW 2229 Australia
Ph: 02 8536 4000 Fax: 02 8556 4055
Finished wall
Ø 100 DWV
Finished wall
surface
45° Corner Set up
with arm support system
Ifo Sign Toilet Increased Height S Trap
AS1428.1:2009
IFO6861
White freestanding toilet with 460mm seat height,
with cistern as resevior and backrest.
FEATURES
• Free Standing WC
• 460 mm seat height (excluding seat)
• 800 mm finished wall to front of pan (based on 200 mm off set)
• 95 degree cistern to pan angle
• Cistern complies with all angles thrust test (for AS1428.1:2009)
of 1100 N for backrest requirements
• Integrated cistern is a deemed-to-satisfy solution which
serves as a backrest “on” the accessible toilet as required in
AS1428.1-2009
• Pan load rated to 400 kg
• Seamless cistern offering back and side transfer support
• Increased foot print for enhanced stability
• Allows for undisturbed coving seal
• Tested to comply with 90% of commonly used Australian
shower commode chairs
• WELS 4 star rated (4.5/3L Flush)
• Fully glazed on back and inside rim to avoid bacteria growth
• Patented Fresh WC blue stick technology enabled for
increased infection control
• All pans are to be fixed using high grade anti-bacterial silicone
of appropriate colour and where exposed mounting holes are
provided, 316 stainless steel screws are to be used
• Provides 100% consistency and reliability as combined
wc and back support - no additional backrest needed to
meet requirements of AS1428.1:2009**
** Refer to AS1428.1:2009 for height and spacial requirements
*Seat not included
Product Code
IFO6861 - IFO - Toilet AS1428.1:2009 set up - S Trap
OPTIONS
Pressalit Sign Seat with Lid - anthracite grey
IFO Sign Raised Flush Button
Floor Anchor
Fresh Sticks - 10 packets of 5 sticks
Images show Rasied Height Button and Pressalit Sign
Toilet Seat with Lid - these are not supplied as standard,
but can be ordered separately - see options.
IFO554112-BD1999
IFO98308
IFO98015
IFO94568
The more
stars the more
water efficient
A joint government and industry program
Licence No. 0058
4.5
litres per full flush
3
litres per half flush
3.3 litres per average flush
When tested in accordance with Standard AS/NZS 6400
For more information and to compare
products, refer to:
Version: Sep 15
Call 1300 369 273
www.enware.com.au/ifo
Enware Australia Pty Limited
9 Endeavour Rd Caringbah NSW 2229 Australia
Ph: 02 8536 4000 Fax: 02 8556 4055
www.waterrating.gov.au
AS 1172.1
AS 1172.2
WMKA21026
IAPMO R&T
Certifikate Nr. 2004-SKM-AE-825
ISO 14001:2004
Certifikate Nr. 2004-SKM-AQ-2054
ISO 9001:2000
Ifo Sign Toilet Increased Height S Trap
AS1428.1:2009
IFO6861
Back View
Side View
800
355
95
400-455
650
900
155
40
460
1100 N all angles
thrust test compliant
200
Finished wall
400 kg load
rating compliant
Finished Floor
50 –70
Ø 100mm DWV
* for more details on the set out, refer to separate document Ifo WC
Set Out TDS
Version: Sep 15
Call 1300 369 273
www.enware.com.au/ifo
Enware Australia Pty Limited
9 Endeavour Rd Caringbah NSW 2229 Australia
Ph: 02 8536 4000 Fax: 02 8556 4055
Ifö Sign/SignFix/SignArt
39-12-3
6832, 6840, 6860, 6861, 6862, 6870, 6872, 6873, 6893, 6894
WC-Unit
6832
6872
95281
6870
6840
6860
6873
6861
6893
6862
6894
www.ifosanitar.com
Assembly instructions
Spare parts •
2 96660
4
98302
3 91782
5
98303
6
98304
7
98305
8
98300
9
98307
18 96769
18 96782
1 96763
10 98308
15 96767
11 98309
12 98310
16 96768
13 98312
14 98313
17 96765
26 96781
26 96772
19 90613
20 96766
19 90610
96771 22
23
96770
27
98960
27 98951
21
96761
96760 28
25
96783
32
90532
36
90531
24
91930
25
96764
96783
91966 29
30
91967
för 6893/6894,6832
96773 31
33
90536
35
90441
34
90533
38
90437
37
90439
42
98949
40
90535
21
96759
39
90442
43
94752
44
94751
46
98015
45
98381
41
90534
2
21
21
96777 96784
47
98030
Thank you for choosing Ifö Sign.
You have chosen an environmentally friendly, easy to clean and elegantly designed WC unit.
To guarantee correct and reliable installation of this product we urge you to follow the installation
instructions. Enware cannot accept liability for damage that occurs as a result of faulty installation.
WC connections
Dosing
The water connection to the cistern inlet is a 1/2" BSP male.
Looking from the front of the pan, it is located on the right
hand side, on the bottom of cistern. See Image 1
This WC is prepared for the Fresh WC function, with a
hygienic dosing of a tablet through the flush button.
The tablet is placed inside the flush armature by opening
the flush button and releasing the tablet in the blue cover
See page 29 for connection dimensions and other dimensions screw, as illustrated in images 16 - 17.
on WC units.
Depending on the content of the tablet, it produces a fresh
odour, cleaning effect on the whole bowl and colour.
Waterproof Floor Mounting
This solution differs from traditional odour and cleaning
blocks that are suspended from the rim of the bowl, by
perfectly rinsing the entire bowl and retaining full flushing
effect.
Aavailable as options:
Waterproof floor mounting IFO98015 - installation
- see image 7.
Ifo Fresh Sticks are available from Enware.
Product code IFO94568 - 10 packets of 5 sticks.
Waterproof floor mounting IFO98030 - installation
- see image 8.
Ifö Sign 6860, 6861
Bonding/Siliconing
You have chosen the optimum standard WC unit with
built-in S-trap. It can usually be installed as quickly
and easily, and in the same situations, as WC units
with traditional open S-traps.
This WC unit is suitable for bonding/siliconing,
see images 11-15.
The method applies to installation of WC units using elastic
silicone joint. First clean the floor to obtain a dry and grease-f
ree surface. Do not use the WC before the silicone has cured.
Remember that the cover must be positioned before
installation, see image 6.
If the WC unit is bonded / siliconed to the floor, the
supplied blind cover plugs (IFO94752) must be used
in the screw holes on the WC unit.
For toilets with Arm Supports (e.g. IFO98125):
Due to the extra force applied to the toilet pan by the arm
supports, it is recommended that the toilet pan be fixed to
the floor using stainless steel pan screws (supplied IFO98381) together with a silicone bed, or fixed using a
water proof floor mounting bracket (IFO98015). The floor
surface should be as flat and level as possible, to ensure
stability. Fixing the toilet pan with only the silicone seal is
not considered to be an adequate method of fixing.
Ifö Sign 6832, 6862, 6872
These WC units are designed for connection to waste in
walls – P-trap.
9
Ifö Sign 6893, 6894
30
You get more free floor space with a wall-hung style WC unit.
It facilitates easier cleaning of the bathroom floor.
Each increment is 1 litre, adjustable from 2-5 litres, or
from 2-3 litres for model 6832.
unit by turning it a quarter turn clockwise and then lifting
Flush button
31
32
Ifo Sign WC units are supplied with:
Flush volume
- Polished chrome flush button (IFO98303)
Optional:
Raised Chrome Button (IFO98308)
button, cut away the catch on the lever arm as shown in
33
Removal of Flush Button and cistern cover
so that the rear catch is installed facing forwards
Remove the flush button, cover mounting and cover as
illustrated in images 16-22.
Reinstalling
Servicing Cistern Components
Reinstall in reverse order. The screws for the cistern
mounting must be tightened alternately to a maximum
torque of 2.5 Nm as illustrated in image 35. The cover
screw must be tightened to a maximum torque of
1.0 Nm as illustrated in image 37.
If the WC unit runs - first check that the outlet valve's
outlet seal washer is not damaged. If it is, replace the
outlet washer (IFO96765), as illustrated in images 23-25.
Then check that the inlet valve closes correctly. If it does
not, replace the inlet valve (IFO96766) as illustrated in
images 26-28.
Maintenance advice and cleaning
The lever arm to the inlet float is normally installed
on the lower float setting for optimum water flow. This
setting can handle a water pressre of 10 bars. In the
event of the WC unit running at high water pressures,
the lever arm can be moved to the upper setting and
then handles a maximum water pressure of 12 bars.
See image 29.
WC units, bidets and wash basins have a glazed
surface. Glazed surfaces are easy to keep clean and
are resistant against most chemicals. Clean regularly to
prevent cleaning problems. Use normal cleaning agents.
“Clean regularly to prevent cleaning problems.
Note: Inlet Water Pressure Max. 500 kPa (AS 3500.1)
However,
use hot water and soap and wipe dry with a cloth”.
This is because cleaning agents for porcelain are not
intended for chrome parts/plastics and can risk cracking
Cleaning utensils, which contain abrasive agents, such
as wire wool and green scouring pads, must not be
used. Strong acids, e.g. hydrochloric acid and sulphuric
acid and strong alkalines, e.g. caustic soda should not
be used. Dripping taps and running WC units must be
repaired immediately.
This WC-unit is test approved according to NT VVS 120
For repair or to purchase spare parts, contact your local
plumbing contractor or plumbing centre. For more information, contact Enware.
If necessary
See images 30 - 32.
If the toilet is subject to freezing temperatures, the WC
0.3 - 0.4 litres of anti-freeze into the water trap and cover
23
evaporation.
, 24 .
10
Spare parts
Pos
Designation
Enware Part Code
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
Cover screw
IFO96763
IFO96660
19.
20.
21.
IFO98303
IFO98307
IFO98308
Bridge assembly
IFO96767
IFO96768
IFO96765
IFO96769
IFO96782
IFO90610
IFO90613
IFO96766
IFO96761
IFO96759
Outlet valve seal washer
Outlet valve assembly
Outlet valve assembly, 6832
Cistern cover, white
Cistern cover, 6832, white
Inlet valve assembly
Inlet pipe assembly
Inlet pipe assembly, Sign 6893, 6894
Inlet pipe assembly, Sign 6832
22.
23.
24.
25.
26.
27.
28.
29.
30.
31.
32.
33.
34.
35.
36.
37.
38.
39.
40.
41.
42.
43.
44.
45.
46.
47.
IFO96784
IFO96771
IFO96770
IFO91930
Catch
O-ring frame, 6832
Frame assembly
Frame assembly, 6832
Inner cistern with gasket
Inner cistern with gasket, 6832
Seal cistern – bowl
Water distributor
Water distributor for 6893/6894/6832
Gasket bowl
Bowl with built-in S-trap, white, 6860
Bowl with built-in S-trap, white, raised, 6861
Bowl universal trap, white, 6862
Bowl universal trap, white, raised, 6872
IFO96783
IFO96772
IFO96781
IFO98951
IFO98960
IFO96760
Bowl, white for 6893
IFO90437
Cistern mounting
White plugs x4
IFO98949
IFO94752
Floor screws + white caps + white plugs
Floor mounting
Floor mounting, bonding
IFO98381
IFO98015
IFO98030
IFO91967
IFO96773
IFO90532
IFO90536
IFO90533
IFO90441
11
1
6
7
8
24
* IMPORTANT NOTE for toilets with Arm Supports (e.g. IFO98125): Due to the extra force applied to the toilet pan by the arm supports,
it is recommended that the toilet pan be fixed to the floor using stainless steel pan screws (supplied - IFO98381) together with a silicone bed,
or fixed using a water proof floor mounting bracket (IFO98015). The floor surface should be as flat and level as possible, to ensure stability.
Fixing the toilet pan with only the silicone seal is not considered to be an adequate method of fixing.
11
12
GB / Make sure the surface of the tiles is clean,
dry and free from grease.
13
14
15
16
2
17
18
25
1
19
20
21
23
22
24
2
1
1
25
26
26
27
28
29
30
Max 12 bar
2 liter
Max 10 bar
5 liter
31
32
2
3 liter
1
8 liter
27
33
34
35
Max 2,5 Nm
2
4
1
3
36
37
28
Max 1,0 Nm
6861
6860
355
650
355
40
c/c Sitsbulthål
155
95
650
c/c Sitsbulthå l
155
95
860
360-415
40
900
460
400- 455
420
20
20
70
70
Ø 102
Ø 102
6862
355
650
40
c/c Sitsbulthå l
155
95
860
360-415
420
Ø 102
190
40
120
6893
6872
355
355
650
c/c Sitsbulthål
155
95
40
230
900
460
c/c Sitsbulthål
155
760
100
75
max 95
min. 40
400- 455
660
100
Ø 102
325
Ø 102
150
190
40
105
290
120
30
20
Ifö Sign, Sign Fix
6860, 6861, 6862, 6870, 6872,
6873
Part Code IFO98381
x4
Z 3 (pozidriv)
x4
GB /For simple access to spare parts, save these instructions!
tu viegli piekļūt rezerves daļām!
Installatør/Installer/ Paigaldaja/ Instaliavo/ Uzstādī tājs
Dato/Date/Kuupäev/ Data /Datums
–
–