Copier 1 Basic 2 Advanced - Konica Minolta Australia

Transcription

7222/7228/7235
Copier
1 Basic
2 Advanced
7222
7228
7235
Copier
Thank you very much for your purchase of the 7222/7228/7235.
This Guide deals with making copies, correct handling of the machine, and
precautions for safety. Please read before copying.
In order to maintain a satisfactory copying performance, please keep this Guide
close at hand for the convenience of reference later.
ENERGY STAR® Program
The ENERGY STAR Program has been established
to encourage the widespread and voluntary use of
energy-efficient technologies that reduce energy
consumption and prevent pollution. As an ENERGY
STAR Partner, we have determined that this product
meets the ENERGY STAR guidelines for energy
efficiency grounding it on the following features.
Auto Low Power
This function conserves energy by lowering the set temperature of the fixing
unit. In the standard setting, Auto Low Power operates automatically when 1
minute have elapsed after completion of the last copy, with the copier remaining
in the ready to copy state during that time.
The time period for the Auto Low Power function can be set for 1 minute, 5
minutes, 10 minutes, 15 minutes, 30 minutes, 60 minutes, 90 minutes, 120
minutes, or 240 minutes. See p. 2-20 for details.
Automatic Shut-Off
This function achieves further energy conservation by partially turning OFF the
power supply, thereby reducing energy consumption to 15W or less. In the
standard setting, Automatic Shut-Off follows Auto Low Power, operating
automatically when 15 minutes have elapsed after completion of the last copy,
with the copier remaining in the ready to copy state during that time.
The time period for the Automatic Shut-Off function can be set for 1 minute, 5
minutes, 10 minutes, 15 minutes, 30 minutes, 60 minutes, 90 minutes, 120
minutes or 240 minutes. See p. 2-20 for details.
Automatic Duplex Copying
To reduce paper consumption, use this function to make double-sided (duplex)
copies, automatically. See p. 3-18 for details.
We recommend that you utilize the Auto Low Power function, the Automatic
Shut-Off function, and the Automatic Duplex Copying function.
© 2004 Konica Minolta Business Technologies, Inc. All rights Reserved.
1
2
3
4
5
6
7
8
9
10
11
12
13
Contents
Safety
Information
Contents
Features of the 7222/7228/7235
Machine
Information
Basic
Copying
Operations
Section 1: Safety Information
Caution Labels and Indicators ............................................................................1-2
Requirements for Safe Use.................................................................................1-5
Power Source.................................................................................................1-5
Environment ...................................................................................................1-6
Precautions for Routine Handling.................................................................1-10
Helpful
Functions
Troubleshooting
Section 2: Machine Information
Machine Configuration ........................................................................................2-2
External Machine Items..................................................................................2-2
Internal Machine Items ...................................................................................2-5
Standard/Optional Equipment ........................................................................2-7
Control Panel Layout......................................................................................2-8
Basic Screen ................................................................................................2-10
FS-113 Finisher............................................................................................2-12
FS-114 Finisher / PK-114 Punch Kit / BK-114 Branch Kit............................2-14
SK-114 Saddle Kit ........................................................................................2-16
Turning On the Power Switch ...........................................................................2-18
To Turn On the Power..................................................................................2-18
To Turn Off the Power..................................................................................2-19
Reducing the Power in Standby Mode (Auto Low Power) ...........................2-20
Shutting Off Automatically (Auto Shut-Off)...................................................2-20
Shutting Off / Reducing the Power Manually................................................2-21
Entering an User ID (User Account).............................................................2-22
Loading Paper...................................................................................................2-23
Loading Paper in Main Body Trays and DB-211 Trays ................................2-23
Loading Paper in DB-411 Tray.....................................................................2-25
Loading Paper in LT-203 Large Capacity Tray ............................................2-26
Loading Paper in Multi-Sheet Bypass Tray ..................................................2-28
Changing Paper Size of Main Body Trays and DB-211 Trays.........................................2-29
Machine
Specifications
Advanced
Information
Special
Original
Applications
Paper &
Original Info
Supplies
Maintenance
Key Operator
Mode
i
Index
Contents (continued)
Section 3: Copying Operations
Positioning Originals ...........................................................................................3-2
Positioning Originals in RADF ........................................................................3-2
Positioning Original on Platen Glass ..............................................................3-5
Setting Print Quantity ..........................................................................................3-7
To Set Print Quantity ......................................................................................3-7
To Change Print Quantity...............................................................................3-7
To Stop Scanning/Printing ..................................................................................3-8
Selecting Paper Size...........................................................................................3-9
To Select Paper Size Automatically (APS).....................................................3-9
To Specify Desired Paper Size (AMS) .........................................................3-11
Selecting Magnification Ratio (Lens Mode) ......................................................3-13
To Copy in 1.00 Magnification Mode............................................................3-13
To Copy in Fixed Magnification Mode ..........................................................3-14
To Copy in Zoom Mode................................................................................3-15
Selecting Density Level.....................................................................................3-16
To Select Copy Density................................................................................3-16
Making Double-Sided Copies (1-2, 2-2)............................................................3-18
Using RADF .................................................................................................3-18
Using Platen Glass.......................................................................................3-20
Making Single-Sided Copies from Double-Sided Originals (2-1)..........................................3-22
Copying Using Special Paper (Multi-Sheet Bypass Tray)..........................................3-24
Copying Using Memory.....................................................................................3-26
To Scan Originals into Memory (Store Mode) ..............................................3-26
To Set Next Copying Job (Reserve).............................................................3-28
To Check/Control Jobs in Progress (Job List Screen) .................................3-30
Output Mode for Machine without Finisher .......................................................3-32
Output Mode for Machine with Finisher ............................................................3-34
Stapling Output Copies (Staple) .......................................................................3-38
Punching File Holes in Copies (Punch) ............................................................3-42
Making Fold in Copies (Fold / Fold & Stitch).....................................................3-47
Output Mode for Machine with Inner Tray IT-101 .................................................3-50
ii
Section 4: Helpful Functions
Making Sample Copy (Proof Copy) ....................................................................4-2
Checking Feature Selections / Proof Copying (Check Mode) ...........................................4-4
Interrupt Copying ................................................................................................4-6
Storing Job Conditions (Job Memory: Job Store) ...................................................4-8
Recalling Stored Job Settings (Job Memory: Job Recall)..........................................4-11
Displaying Screen for Operation Guide (Help Mode)........................................4-12
To Display the Help Screen from Basic Screen ...........................................4-12
To Display Help Screen from Other Screens ...............................................4-14
1
2
3
4
5
6
7
8
9
10
11
12
13
Safety
Information
Machine
Information
Copying
Operations
Helpful
Functions
Section 5: Troubleshooting
When “Call for Service” Message Is Displayed...................................................5-2
Limited Use of the Copier in Trouble..............................................................5-3
Preventive Maintenance .....................................................................................5-4
Clearing Mishandled Paper.................................................................................5-5
When “JAM” Appears on Folder Key ..................................................................5-7
When “ADD PAPER” Appears on Folder Key.....................................................5-9
When “Memory Full” Message Is Displayed (Memory Overflow).....................................5-10
Action 1 ........................................................................................................5-10
Action 2 ........................................................................................................5-11
When Power OFF/ON Screen Is Displayed......................................................5-12
Troubleshooting Tips ........................................................................................5-13
Section 6: Machine Specifications
Troubleshooting
Machine
Specifications
Advanced
Information
Special
Original
Main Body Specifications....................................................................................6-2
Main Body ......................................................................................................6-2
Option Specifications ..........................................................................................6-3
RADF (DF-320) ..............................................................................................6-3
FS-113 In-Bin Stapler Finisher .......................................................................6-3
FS-114 In-Bin Stapler Finisher .......................................................................6-3
IT-101 Inner Tray............................................................................................6-3
PK-114 Punch Kit ...........................................................................................6-4
SK-114 Saddle Kit ..........................................................................................6-4
DB-211 Drawer Base Unit ..............................................................................6-4
DK-110 Desk Unit...........................................................................................6-4
DB-411 Drawer Base Unit ..............................................................................6-5
LT-203 Large Capacity Tray...........................................................................6-5
Memory Unit ...................................................................................................6-5
Others.............................................................................................................6-5
Applications
Paper &
Original Info
Supplies
Maintenance
Key Operator
Mode
iii
Index
Advanced
Section 7: Advanced Information
Programmed Shut-Off (Weekly Timer) ...............................................................7-2
Timer Interrupt................................................................................................7-2
Rotation...............................................................................................................7-4
Vertical/Horizontal Zoom Mode...........................................................................7-5
Section 8: Special Original
Making Copy Quality Closer to Originals (Text/Photo Enhance) .......................................8-2
Copying Mixed Size Originals (Mixed Original)...................................................8-4
Copying Folded Originals (Folded Original)........................................................8-6
Copying Non-Standard Size Originals (Non-Standard Size) ...................................8-8
Section 9: Applications
To Display Application Selection Screen ............................................................9-2
Inserting Sheets and Covers (Sheet/Cover Insertion) ........................................9-3
Positioning Title Pages on the Right Side (Chapter)...........................................9-7
Lay Out Several Pages onto One Sheet (Combination) ...................................9-10
Making a Multiple Page Signature Booklet (Booklet)........................................9-13
Copying onto Transparent Films (OHP Interleave)...............................................9-16
Inserting Images into Printed Sets (Image Insert).............................................9-18
Dividing an Image into Right and Left Pages (Dual Page).........................................9-21
Reverse the Second Side in 1-2 Mode (Flip Side 2).........................................9-25
Erasing Outside of the Original (Non-Image Area Erase) .....................................9-27
Reversing Colour in Black and White Image (Reverse Image) .......................................9-29
Repeating Selected Image Area (Repeat: Vert./Horiz. Mode)....................................9-31
Repeating Automatically or Selecting Repeating Times
(Repeat: AUTO/ Repeat Mode) ...................................9-34
Eliminating Black Copy Marks Along Borders (Frame/Fold Erasure) ..............................9-37
Copying Image in the Centre of Copy Paper (AUTO Layout).....................................9-40
Adjusting Position of Copy Image (Image Shift) ...............................................9-42
Reducing Images to Create Binding Margin (Reduce&Shift) .....................................9-44
Printing Stamp, Page, Watermark onto Copies (Stamp).......................................9-47
Overlaying an Image onto Each Page Copied in the Job (Overlay) ................................9-51
iv
Section 10: Paper and Original Information
Paper Information .............................................................................................10-2
Paper Weight................................................................................................10-2
Tray/ Exit Tray Capacity ...............................................................................10-3
Paper Size....................................................................................................10-6
Special Paper in Multi-Sheet Bypass Tray ...................................................10-7
To Store Copy Paper....................................................................................10-7
Original Information...........................................................................................10-8
Platen Glass Originals..................................................................................10-8
RADF Originals ............................................................................................10-9
Section 11: Supplies
Adding Toner ....................................................................................................11-2
Inserting a New Staple Cartridge into FS-113 Finisher .........................................11-6
Empty Waste Basket of FS-113 Finisher ........................................................11-10
Inserting a New Staple Cartridge into FS-114 Finisher .......................................11-12
Inserting a New Staple Cartridge into SK-114 Saddle Kit ...................................11-16
Empty Waste Basket of PK-114 Punch Kit .....................................................11-20
Section 12: Maintenance
1
2
3
4
5
6
7
8
9
10
11
12
13
Safety
Information
Machine
Information
Copying
Operations
Helpful
Functions
Troubleshooting
Machine
Specifications
Advanced
Information
Cleaning Image Scanning Section....................................................................12-2
Cleaning the Platen Glass and Cover ..........................................................12-2
Cleaning the RADF ......................................................................................12-3
Cleaning Image Printing Section.......................................................................12-5
Cleaning the Writing Unit Glass and the Electrode Wires ............................12-5
Checking Copy Count .......................................................................................12-7
To Displaly the Counter List Screen.............................................................12-7
To Print the Counter List ..............................................................................12-8
Section 13: Key Operator Mode
How to Access the Key Operator Mode............................................................13-2
To Display the Key Operator Mode Screen..................................................13-2
[1] System Initial................................................................................................13-4
[1] Time ........................................................................................................13-4
[2] Language ................................................................................................13-5
[2] Copier Initial .................................................................................................13-6
[1] Copy Mode ..............................................................................................13-7
[2] Density ....................................................................................................13-8
[3] Magnification ...........................................................................................13-9
[4] Tray .......................................................................................................13-10
[5] Output ...................................................................................................13-11
[6] Non-Image Erase ..................................................................................13-14
[7] Original Mode ........................................................................................13-15
v
Special
Original
Applications
Paper &
Original Info
Supplies
Maintenance
Key Operator
Mode
Index
Section 13: Key Operator Mode (continued)
[3] Preset Key .................................................................................................13-16
[1] Density ..................................................................................................13-16
[2] Magnification .........................................................................................13-17
[4] User Account (E.K.C.)................................................................................13-18
How to Access the User Account (E.K.C.) Setting Mode ...........................13-19
[1] Change User Account (E.K.C.) Data.....................................................13-20
[2] User Account (E.K.C.) Data List............................................................13-22
[3] All Counter Reset ..................................................................................13-24
[4] EKC On/Off Setting ...............................................................................13-25
[5] Copy Limit Reached Effect....................................................................13-26
[5] Lock Job Memory.......................................................................................13-27
[6] Paper Type ................................................................................................13-28
[7] Panel Contrast ...........................................................................................13-29
[8] Key Operator Setting .................................................................................13-30
[1] Key Operator Data Setting ....................................................................13-30
[2] E-Mail Notification Setting .....................................................................13-31
[9] Weekly Timer .............................................................................................13-33
How to Access the Weekly Timer Setting Mode ........................................13-34
[1] Weekly Timer Setting ............................................................................13-35
[2] Weekly Timer Copier ON/OFF Time Set...............................................13-36
[3] Machine Working Day Individual Set.....................................................13-38
[4] Lunch Hour Off Function .......................................................................13-39
[5] Password Setting ..................................................................................13-40
[10] Touch Panel Adjustment..........................................................................13-41
[11] Power Save..............................................................................................13-42
[12] Memory Switch ........................................................................................13-43
[13] List Print ...................................................................................................13-47
[14] Application Customize .............................................................................13-48
[15] Density Shift.............................................................................................13-49
[16] KRDS Host...............................................................................................13-50
[17] Machine Mail Address Setting .................................................................13-51
[18] HDD Setting Menu ...................................................................................13-52
[19] Finisher Adjustment .................................................................................13-55
Index
vi
Features of the 7222/7228/7235
• AE - Automatic Exposure
Automatically adjusts exposure to compensate for quality of the original.
• AMS - Automatic Magnification Selection
Automatically selects an appropriate magnification ratio when Paper Size is selected
manually.
• APS - Automatic Paper Selection
Automatically selects copy paper size to match the original documents.
• ATS - Automatic Tray Switching
Automatically switches tray to allow printing and copying to continue without
interruption if the selected tray empties while copying is in progress.
• Auto Layout
The original image on the platen glass or in the document feeder is copied and centred
on a sheet.
• Auto Low Power
Automatically lowers the power after a specified period of copier inactivity.
• Auto Reset
Automatically resets to auto mode defaults after a specified period of copier inactivity.
• Auto Shut-Off
Automatically shuts off the main power after a specified period of copier inactivity.
• Booklet
Creates a multiple page signature booklet copied on both sides of paper in 1-2 or 2-2
copy mode.
• Chapter
Starts chapter pages on the right side (front pages) of the finished document. Only
duplex mode (1-2 or 2-2) is compatible with this feature.
• Combination
Copies a fixed number (2, 4, or 8) of pages onto one sheet of copy paper to create a
draft copy of a multi-page report at the same time as saving paper.
• Copy Density
Manually selects up to 9 density levels.
• Copy Mode
Selects the desired simplex mode (1-1 or 2-1); or duplex mode (1-2 or 2-2).
• Counter List
Displays on the screen and prints the following data: total counter of the machine, FAX
TX/RX counter, printer counter and the scanner counter.
vii
Features of the 7222/7228/7235 (continued)
• Density Shift
Shifts each of nine density levels in four density modes to three levels lighter or two
levels darker (Text/Photo, Text, and Photo modes), and two levels lighter or three levels
darker (Increase Contrast mode).
• Dual Page
Copies both pages of an open book or A3/B4 size sheet separately onto two A4/B5 size
sheets in 1-1 mode or separately onto each side of one A4/B5 size sheet in 1-2 mode.
You can use the Dual Page mode with the Front or Front/Back cover mode. The cover
page(s) will be scanned and copied normally before image division is performed on the
other pages.
• Flip Side 2
1-2 Flip Side 2 arranges the even pages of the simplex originals upside down on the
reverse side of duplex copies.
Similarly, 2-1 Flip Side 2 rearranges the reverse side of duplex originals which reads
upside down to make normal simplex copies.
• Folded Original
This feature sets the RADF to accept folded originals.
• Frame/Fold Erasure
Erases border and/or fold image area using Frame (1 - 15 mm), Fold (1 - 30 mm), or
Frame & Fold.
• Image Insert
Stores pages in memory from the platen glass, and inserts the pages into a document
copied from the document feeder.
• Image Shift
Creates or removes a margin at the top, bottom, right and left edges (shift amount from
- 250 mm ~ + 250 mm, in 1 mm increments); and reduces image to prevent image loss
(reduce & shift amount from - 250 mm ~ + 250 mm, in 1 mm increments).
• Interrupt Copying
Interrupts job-in-progress to perform an urgent copy, using any of the copier features
for the interrupt job.
• Job List
Displays the Job List Screen to view the current machine status, changes the operation
order of reserve jobs, or deletes the unused reserve job.
• Job Memory
Programs up to 15 jobs and recalls each job by job number, as needed. All compatible
platen glass functions can be programmed into Job Memory directly after they are
selected.
• Lens Mode (Zoom)
Selects fixed ratios, three reduction, three enlargement, and three user-set ratios.
Zoom ratios can be selected from 25 % ~ 400 % in 1 % increments.
viii
• Machine Status Confirmation
Displays the current machine status on LCD for confirmation.
• Manual Shut-off
Shuts off the machine’s power when pressing [POWER SAVER ON/OFF] on the
control panel.
• Mixed Original
Copies mixed size originals from the document feeder in APS or AMS mode. APS
automatically selects the paper size of each original. AMS mode allows you to select
one paper size for all originals.
• Non-Image Area Erase
When copying from the platen glass when the document cover is open, copies only the
image area and not the exposed area of glass, which would otherwise copy as black.
• Non-Standard Size
Identifies the special original size which the machine cannot detect, in order to select
the optimal paper size for copying or printing.
• OHP Interleave
Copies onto transparency film and interleave blank or copied paper for each original
copied.
• Output Mode for Machine with FS-113 Finisher Installed:
Stack, Sort, Staple, Group, and Punch modes using the primary (main) tray
Stack mode using the secondary (sub) tray
• Output Mode for Machine with FS-114 Finisher Installed:
Stack, Sort, Staple, and Group modes using the two exit trays (or three exit trays
including optional BK-114 tray)
Punch mode with optional PK-114 Punch kit
Fold & Stitch and Fold modes with optional SK-114 Saddle kit
• Output Mode for Machine with IT-101 Inner Tray Installed:
Stack, E-SORT+Sort, E-SORT+Group, and Group modes using the two exit trays
• Output for Machine with no Finisher Installed:
Stack, E-SORT+Sort, E-SORT+Group, and Group modes
• Overlay
Stores Overlay images in the system’s memory and overlays it on the pages of another
document. For example, you may want to incorporate a page heading, graphic design
or logo into the pages of your document.
ix
• Paper Capacity
Maximum 2,050 sheets in the machine with DB-211 drawer, including four 500-sheet
trays and a 50-sheet Multi-sheet bypass tray.
Maximum 2,550 sheets in the machine with DB-411 drawer, including two 500-sheet
trays, a 1,500-sheet tray and a 50-sheet Multi-sheet bypass tray.
Maximum 4,550 sheets in the machine with DB-411 drawer and LT-203 large capacity
tray, including two 500-sheet trays, a 1,500-sheet tray, a 2,000-sheet tray and a 50sheet Multi-sheet bypass tray.
• Platen Memory
Scans documents into memory from the platen glass and/or the document feeder and
inserts the pages into another document copied from the document feeder. If an
incompatible function is selected in this mode, the latter function will not be selected,
and an Error message will be displayed.
• Power Saver
Automatically turns off all but nominal power supply after a specified period of copier
inactivity, for optimal efficiency. Power is returned after a brief warm up period by
pressing the power switch on the control panel.
• Proof Copy
To ensure correct output before running multiple copies, run a proof copy by pressing
[PROOF COPY] on the control panel or by touching PROOF COPY on the Check
Screen.
• Punch Mode for Machine with FS-113 Finisher or FS-114 Finisher (with PK-114
Punch Kit) Installed:
Punches four holes in output copies.
• Repeat
Selects the horizontal image area across the page, and repeats it down the page as
many times as the repeat width setting (10 ~ 150 mm) permits in manual or auto.
• Reserve
Scans in subsequent copy jobs while the machine is busy printing or copying.
• Reverse Image
Reverses the image from black-on-white to white-on-black or vice versa.
• Rotation
Rotates the image before copying when the portrait/landscape orientation of the
original is different from the orientation of the copy paper.
• Rotation Copy of Enlarge
Automatically rotates and enlarges an A4 or B5 original image to match the short-edgefeeded A3 or B4 paper size.
x
• Rotation Exit (E-SORT+Sort / E-SORT+Group)
When IT-101 Inner Tray or no Finisher is installed, Rotation Exit alternately switches
the horizontal and vertical orientation of each sorted set as it outputs to the exit tray.
Be sure to load both A4 and A4R in separate trays (including the Multi-sheet bypass
tray) before selecting this feature.
• Sheet/Cover Insertion
Inserts up to 15 blank or copied sheets from any tray including the Multi-sheet bypass
tray, or inserts blank or copied front and back covers from any tray including the Multisheet bypass tray to enhance the presentation of multi-page documents.
• Stamp
Prints watermark, regular stamp, date/time, page number, and numbering onto the
output copies to enhance the presentation and usefulness of the copies.
• Staple
Selects the stapling position and number of staples.
• Text/Photo Enhance
Enhances photo image in Photo mode, regular image in Text/Photo mode, text image in
Text mode, lighter image in Increase Contrast mode.
• Userset Density (USERSET 1, USERSET 2)
Outputs up to 16 density samples on a total of 4 pages that display 4 samples per page,
then programs the desired density under USERSET 1 and/or USERSET 2.
• Weekly Timer
Can be set according to the needs of each work environment. Turns main body power
Off/On daily or weekly, during lunch time, on holidays, and also enables the Timer
Interrupt mode, which allows temporary use of the machine even when the machine is
in the daily, weekly, or holiday Off mode.
xi
1
2
3
4
5
6
Safety
Information
Basic
Machine
Information
Copying
Operations
Helpful
Functions
Troubleshooting
Machine
Specifications
1
Safety
Information
Section 1:
1
Safety Information
Precautions for Installation and Use
Caution Labels and Indicators ................................................................... 1-2
Requirements for Safe Use ....................................................................... 1-5
Caution Labels and Indicators
The caution labels and indicators are attached to the machine areas, as shown below,
where you are advised to pay special attention to avoid any dangerous situations or
serious injury.
CAUTION
CAUTION
The fixing unit is
very hot.
To avoid getting
burned DO NOT
TOUCH.
PRECAUCION
High
¡Temperatura
temperature! alta!
Do not touch.
Use care when
clearing paper.
No tocar.
Tenga cuidado al
remover el papel.
CAUTION High temperature!
PRECAUCION ¡Temperatura alta!
WARNING/
WARNING
This area generates
high voltage. If
touched, electrical
shock may occur. DO
NOT TOUCH!
(Inside of the main
body right side door)
Burns or injury may occur from touching the areas detailed in the
caution labels and caution indicators. Do not remove caution
labels or indicators. If any caution label or caution indicator is
soiled, please clean to make legible. If you cannot make them
legible, or if the caution label or indicator is damaged, please
contact your service representative for replacement labels.
1-2
Caution Labels and Indicators (continued)
CAUTION
This area is very
hot.
To avoid getting
burned DO NOT
TOUCH.
FS-113 Finisher
(Inside of the Finisher)
CAUTION
To avoid injury, DO NOT put your hand on the
top of the printed sheets. Be sure to hold both
sides of the printed sheets when removing them,
and DO NOT leave your hand on the printed
sheets while the primary (main) tray goes up.
FS-114 Finisher
CAUTION
The area opened by the
conveyance lever is very
hot.
To avoid getting burned
DO NOT TOUCH.
(Inside of the Finisher front door)
1-3
1
Safety
Information
Caution Labels and Indicators (continued)
The following indicators are used on the caution labels or in this guide to categorize the
level of safety cautions.
DANGER:
Action probable to cause death or serious injury.
WARNING:
Action likely to cause death or serious injury.
CAUTION:
Action liable to cause minor injury, machine trouble or physical damage.
If you find any of these indicators when removing jammed paper, adding toner, or
reading the guide, be sure to follow the information.
If the safety cautions in the guide become illegible due to soilage, etc.,
please procure a new copy from your service representative.
1-4
1
Requirements for Safe Use
Safety
Information
To ensure your safe use of the machine, you are required to observe the following
precautions without fail for the machine’s power source and during installation and
routine handling. Be sure to read and observe them.
Power Source
CAUTION: Plug Socket
• A socket is limited in capacity. Use only a power source with the correct rating for the
machine; otherwise, hazardous situations such as smoking or overheating may
occur.
• Avoid multiple connections in the same outlet. Do not use multiple outlet adaptors.
CAUTION: Power Plug and Cord
• Be sure to insert the power plug firmly into the power socket. Otherwise, a hazardous
situation such as smoking or overheating may occur . If the inserted power plug is
loose in the socket, even after it has been inserted, disconnect the plug and contact
your electrical contractor.
• For plug cable equipment, the outlet must be near the equipment and easily
accessible.
• Do not bend or crush the power cord. If your copier power cord is bent or damaged in
any way, contact your service representative immediately. Do not attempt to repair it
yourself, and do not continue to operate the copier. A damaged power cord may
result in overheating, short circuit, or fire.
• Do not bundle or coil the power cord of the copier. Otherwise an accident may occur
as a result of overheating or fire.
CAUTION: Connecting Multiple Loads to One Outlet Prohibited
Never connect multiple loads to one outlet using a multi-outlet extension cord or
branched socket. Otherwise an accident may occur as a result of overheating or fire.
CAUTION: Extension Cord
An extension cord must never be used with this machine.
1-5
Requirements for Safe Use (continued)
Environment
CAUTION: Prevention of Fire
Do not install near flammable materials, curtains or
volatile combustibles, that can catch or cause fire.
CAUTION: Prevention of Short Circuit
Do not install the copier where it could be splashed with
rain water, or water from a tap, to avoid a short circuit.
CAUTION: Temperature and Humidity
• Keep away from direct sunlight, heat sources such as
stoves, cool air from an air conditioner and hot air from
a heater.
• Avoid any environment that is outside the range
shown below:
10 to 30°C in temperature
10 to 80% in humidity
CAUTION: Ventilation
• Install the machine in a well-ventilated place.
• Keep away from dust or corrosive gases. These materials may cause poor image
quality.
• During use, the machine generates ozone in an insufficient amount to cause any
hazard to the human body.
However, if the machine is used in a poorly ventilated room, many copies are made,
or more than one copier is used at the same time, an odor may be detected. Ensure
adequate ventilation for a comfortable working environment.
CAUTION: Vibration
Do not install on a floor which is subject to vibration or is not level.
CAUTION: Transportation
Be sure to contact your service representative when moving or transporting the
machine. If you move the machine with the Hard disk unit and Memory unit installed,
machine trouble may be caused by vibration.
1-6
CAUTION: Installation Space
Allow sufficient space to facilitate copy operation, changing parts, and periodic
inspection. Leave an adequate space behind the machine to let hot air out from the rear
fan.
Unit: mm
487
100
595
500
550
655
200
1523
328
259
1036
1405
1195
Main body + CV-109 + DK-110
Unit: mm
487
252
595
500
550
655
200
1621
328
259
1134
1405
1347
Main body + IT-101 + DB-411
1-7
1
Safety
Information
Unit: mm
532
500
595
550
655
200
1621
1258
328
259
1134
928
320
432
1627
1405
Main body + DB-411 + FS-114
Unit: mm
532
595
610
100
550
655
1621
1258
328
259
1134
312
928
1837
1405
Main body + DB-211 + LT-203 + FS-114 + BK-114
1-8
200
Unit: mm
652
595
550
610
655
100
200
1621
328
1350
259
1134
312
530
642
1405
1957
Main body + DB-211 + LT-203 + FS-114 + SK-114 + BK-114
Unit: mm
100
487 100
910
610
595
550
655
680
200
1621
328
259
1134
943
312
2315
1405
Main body + DB-411 + LT-203 + RU-101 + FS-113
• Finisher FS-113 primary (main) tray gradually goes down while printed
materials output. DO NOT allow any object to interfere with the operation
of the tray on the left side of the finisher, as any interference may cause
damage to the finisher.
• Finisher FS-114 trays gradually go up/down while printed materials
output, depending on the tray selected. With SK-114 Saddle kit, the
operation of the trays become greater. DO NOT allow any object to
interfere with the tray operation on the left side of the finisher, as any
interference may cause damage to the finisher.
• DO NOT place any object or lean on SK-114 Saddle kit installed in
Finisher FS-114, otherwise machine trouble may occur.
1-9
1
Safety
Information
Precautions for Routine Handling
WARNING: High Voltage
DO NOT TOUCH the high voltage parts indicated with WARNING label or described in
the guide.
CAUTION: Actions in Response to Troubles
• If the Service Call screen is displayed and copier operations cannot be continued,
stop operation to prevent any unexpected accident. Write down the report code
(stated on the 2nd line of the message), then switch off the copier and disconnect
from the power socket. Contact your service representative and inform them of the
report code.
• Do not touch high temperature parts indicated with CAUTION labels or described in
the guide.
• Do not touch the inside of the machine for any purpose other than removing jammed
paper or adding toner.
• If machine repair is necessary, be sure to contact your service representative. Never
attempt to repair it by yourself.
• If any abnormal sound, smell or smoke comes from the machine, immediately stop
using it, turn off the power switch, disconnect the power plug and contact your service
representative.
• If the breaker trips or the fuse blows, turn off the power switch, reset the breaker or
the fuse, and turn on the machine. If the same situation occurs again, contact your
service representative.
• Ensure the replacement fuse conforms with the rating of the power source. Never use
a fuse with an incorrect rating.
CAUTION: Prevention of Fire
Do not use volatile combustibles, such as thinner or alcohol, near the machine.
CAUTION: Prohibition of Machine Modification
Do not modify or remove any parts by yourself.
1-10
CAUTION: Prevention of Machine Troubles
• Do not drop small metallic objects, such as paper clips or
staples, inside the machine.
• Do not place any heavy or hard objects such as a vase,
books or ornaments on the machine.
CAUTION: Recommendation of Periodic Check
Be sure to periodically check the following:
(1) The main cord or the power plug does not generate abnormal heat.
(2) The power plug is not inserted loosely or the cord is not cut or scratched.
(3) The grounding wire is correctly connected.
(4) The power plug or the power outlet is not covered with dust.
If you find anything abnormal with the above items, stop using the machine and contact
your service representative.
CAUTION: Toner
• Keep the toner cartridge away from children. The toner is nontoxic; however if you
inhale or contact with eyes by accident, flush with water and seek medical advice.
• Do not throw the empty toner cartridge into a fire. If it is thrown into a fire the toner
may ignite and cause a dangerous situation.
CAUTION: Paper
Check copy paper to be sure it conforms to the specifications outlined in Section 10.
• Do not use paper with any staples, or paper that conducts electricity (silver, carbon,
etc.), otherwise an accident may occur as a result of fire.
• To avoid machine trouble, do not use heat-sensitive paper, coloured OHP film, or
paper specifically designed for ink-jet printers, such as photo-paper.
CAUTION: Power Saver and Weekly Timer
• In Power Saver mode, the copier is still connected to the main power supply and
power is still applied to certain areas of the machine. To avoid any unexpected
troubles, turn the power OFF when not using the copier for long periods of time.
• When the Weekly Timer function is operating, turning power OFF will disable the
function.
CAUTION: Fixing Unit
The internal fixing unit is very hot. To avoid getting burned, DO NOT TOUCH. Be
careful when withdrawing the fixing unit.
1-11
WARNING: Drum Unit
The internal drum unit generates a high voltage.
To avoid an electrical shock, DO NOT TOUCH.
CAUTION: Disposal of Copier
Do not dispose of this copier yourself. Contact your service representative, who can
arrange for its safe disposal.
If you change the place of installation, please contact your service representative.
CAUTION: Paper Capacity for the Exit Tray
The exit tray capacity is max. 100 sheets. If a copy run of more than 100 is required, be
sure to remove the copies from the exit tray before the maximum capacity is reached.
Failure to do so will cause the copier to jam.
CAUTION: Paper Capacity for the IT-101 Inner Tray
The IT-101 Inner Tray is equipped with two exit trays.
To prevent paper misfeed, do not exceed the paper capacity of the Inner tray.
CAUTION: FS-113 Finisher Paper Capacity
The FS-113 Finisher is equipped with two exit trays.
Select an exit tray and output mode on the Output Mode popup menu.
To prevent paper misfeed, do not exceed the paper capacity of the Finisher.
CAUTION: FS-114 Finisher Paper Capacity
The FS-114 Finisher is equipped with two exit trays, which may be increased to three or
four trays by installing the optional BK-114 Branch kit and/or SK-114 Saddle kit.
Select an exit tray and output mode on the Output Mode popup menu.
To prevent paper misfeed, do not exceed the paper capacity of the Finisher.
CAUTION: FS-113 Finisher Primary (Main) Tray
When printed materials are removed from the primary (main) tray of the Finisher, the
tray goes up automatically. To avoid injury, DO NOT put your hand on top of the printed
sheets. Be sure to hold both sides of the printed sheets when removing them, and DO
NOT leave your hand on the printed sheets while the primary tray goes up.
1-12
Section 2:
2
Machine
Information
Machine
Configuration
Turn On/Off
the Power
2
Loading
Paper
Machine Information
Machine Configuration, Turning On the
Power and Loading Paper
Machine Configuration............................................................................... 2-2
Turning On the Power Switch .................................................................. 2-18
Loading Paper ......................................................................................... 2-23
Changing Paper Size of Main Body Trays and DB-211 Trays ................................ 2-29
Changing
Paper Size
Machine Configuration
External Machine Items
1 Platen cover (CV-109)
19 Finisher (FS-114)
(option)
22 Control panel
20 Power switch
18 Finisher (FS-113)
21 LCD touch screen
(option)
2 RADF (DF-320)
3 Work table
4 Key counter
(option)
5 Multi-sheet
bypass tray
6 Right side door
of main body
7 Large capacity
tray (LT-203)
(option)
16 Front door of main body
10 Tray 3
DB-411
9 Tray 2
8 Tray 1
1
2
3
4
5
6
7
8
9
2-2
Platen cover (CV-109) (option) covers documents to be copied and holds them in
place.
RADF (Reversing Automatic Document Feeder) (DF-320) automatically feeds
multiple originals one at a time to the platen glass for copying.
Work table provides a convenient workspace for documents both before and after
copying.
Key counter (option) manages the number of copies made on the machine.
Multi-sheet bypass tray used for small quantity copying onto plain paper or special
paper.
Right side door of main body opens to allow removal of mishandled paper or
cleaning the transfer/separator electrode wire.
Large Capacity Tray (LT-203) (option) holds 2,000 sheets of A4. It can be reset by
service 8.5”x11”.
Tray 1 (main body universal tray) is user-adjustable and holds 500 sheets from B4
to A5R.
Tray 2 (main body universal tray) is user-adjustable and holds 500 sheets from A3
to A5R.
Machine Configuration (continued)
2
Machine
Information
Machine
Configuration
17 Inner tray (IT-101) (option)
15 Exit tray
Turn On/Off
the Power
12 Right side door
of Drawer base
Loading
Paper
Changing
Paper Size
14 Main power switch
10 Tray 3
DB-211
11 Tray 4
13 Desk (DK-110)
10 Tray 3 (DB-211 universal tray) (option) is user-adjustable and holds 500 sheets
from A3 to A5R.
Tray 3 (DB-411 fixed tray) (option) is initially fixed at A4 and holds 1,500 sheets. It
can be reset by service 8.5”x11”, 8.5”x11”R, B5, B5R, or A4R.
11 Tray 4 (DB-211 universal tray) (option) is user-adjustable and holds 500 sheets
from A3 to A5R.
12 Right side door of Drawer base opens to allow removal of mishandled paper.
13 Desk (DK-110) (option) accommodates copy paper or copy materials.
14 Main power switch turns machine power ON/OFF to operate it as copier/scanner/
printer/facsimile.
15 Exit tray holds copied sheets.
16 Front door of main body opens to the internal copier to allow clearing of
mishandled paper, replenishing of toner or cleaning the corona wire.
17 Inner tray (IT-101) (option) sorts, rotation sorts (E-SORT+sort mode), groups, and
rotation groups (E-SORT+group mode) into finished sets.
18 FS-113 Finisher (option) sorts, staples, groups, and punches into finished sets.
19 FS-114 Finisher (option) sorts, staples and groups into finished sets.
20 Power switch turns copier power On/Off when pressed.
21 LCD Touch screen displays interactive operation screens.
22 Control panel controls copier operations.
2-3
23 Saddle kit (SK-114) (option)
24 FS-114 Finisher (option)
25 Branch kit (BK-114) (option)
24 FS-114 Finisher (option)
26 Punch kit (PK-114) (option)
23 Saddle kit (SK-114) (option) (folding part)
(Inside the Finisher front door)
25 Branch kit (BK-114) (option)
23 Saddle kit (SK-114) (option) staples at two position in the centre and/or folds
copies into booklet-styled sets.
24 FS-114 Finisher (option) sorts, staples and groups into finished sets.
25 Branch kit (BK-114) (option) holds copied sheets when installed in FS-114
Finisher.
26 Punch kit (PK-114) (option) punches file holes in the output copies.
2-4
Internal Machine Items
2
Machine
Information
Machine
Configuration
1 Toner bottle cover
Turn On/Off
the Power
2 Developing unit
Loading
Paper
Changing
Paper Size
4 Writing unit glass cleaning knob
3 Corona wire cleaning knob
1
2
3
4
Toner bottle cover is to be opened when supplying toner.
Developing unit prints images to the drum, and needs to be replaced periodically.
Corona wire cleaning knob is withdrawn to clean the corona wire.
Writing unit glass cleaning knob is withdrawn to clean the writing unit glass.
2-5
5 Transfer/Separator wire cleaning lever
14 ADU
15 Fixing unit cover 9
6 Fixing unit guide 5
7 Conveyance
unit cover 6
8 Lever 1
9 Lever 2
10 Cover 3
11 Lever 7
12 Lever 4
13 Lever 8
LT-203 Large Capacity Tray
5
6
7
8
9
10
11
12
13
14
15
2-6
Transfer/Separator wire cleaning lever can be slidden to clean the transfer/
separator wire.
Fixing unit guide 5 fuses the toner onto the copy paper, and is to be opened for
removal of mishandled paper.
Conveyance unit cover 6 passes the paper through the drum unit, and is to be
opened for removal of mishandled paper.
Lever 1 can be opened for removal of mishandled paper.
Lever 2 can be opened to release the pressure rollers for removal of mishandled
paper.
Cover 3 can be opened for removal of mishandled paper.
Lever 4 can be opened for removal of mishandled paper in ADU.
ADU is used for stackless duplex copying.
Fixing unit cover 9 is to be pushed down for removal of mishandled paper.
Standard/Optional Equipment
ET-101 Exit tray
2
Machine
Information
IT-101 Inner tray
Machine
Configuration
Turn On/Off
the Power
IP-424 Printer controller
Loading
Paper
CF-101 Compact flash memory
PS-346 PostScript 3
Changing
Paper Size
MU-404/MU-405 Memory unit
CV-109 Platen cover
FS-114 Finisher
DF-320
Reversing automatic
document feeder
BK-114 Branch kit
MU-404/
MU-405
Memory unit
PK-114 Punch kit
SK-114 Saddle kit
(Stapling part) SK-114 Saddle kit
(Folding part)
HD-103 Type-A
Hard disk unit
FL-103 Fax
line expansion
kit
Main body
FK-103 Fax kit
FS-114 Finisher
DK-110 Desk unit
RU-101
Relay unit
DB-211 Drawer base unit
LT-203 Large
capacity tray
FS-113 Finisher
DB-411 Drawer base unit
2-7
Control Panel Layout
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
2-8
1
2
23
22
3
4
5
6
21
7
20
8
9 10
11 12 13
19 18 17
16 15 14
POWER SWITCH turns copier power On/Off when pressed.
COUNTER displays the Counter List Screen when pressed.
LCD TOUCH SCREEN displays machine and copying status, help information,
interactive screens, and touch keys for selecting all functions.
CHECK displays a screen showing all settings that are selected for the current job.
HELP displays a screen with help for the currently selected function, and access to
the Key Operator Mode Screen.
DATA blinks while receiving print data in print mode, then lights after completing it.
PRINT switches the machine operation mode to print.
SCAN/SERVER switches the machine operation mode to scan/server.
KEYPAD enters numeric values.
FAX switches the machine operation mode to facsimile.
COPY switches the machine operation mode to copy.
INTERRUPT stops copying/facsimile/printing/scanning in progress to allow copying
from the platen glass.
POWER SAVER ON/OFF activates power-saving mode for times when the copier is
inactive.
STOP stops the copying sequence; deletes the stored memory.
PROOF COPY outputs a single set of copies to confirm whether the current settings
are selected properly.
START activates copying or scanning.
[#] accesses programming modes for setting facsimile and special functions.
[C] (CLEAR) allows resetting of print quantity.
[*] accesses facsimile functions.
AUTO RESET restores copier to default settings or to Key Operator settings.
JOB MEMORY displays screens for selecting job store / job recall functions.
22 CONTRAST ADJUSTMENT DIAL can be turned to adjust the touch panel contrast.
23 MAIN POWER INDICATOR goes On/Off when the main power switch is turned On/
Off.
2
Machine
Information
Machine
Configuration
Turn On/Off
the Power
Loading
Paper
Changing
Paper Size
2-9
Basic Screen
The Basic Screen displays when copying operation becomes available after warm-up.
6 Job No. icon
5 Message area
4 RESERVE key
3 Date/Time
indicator
11 JOB LIST key
7 Original counter
10 Memory indicator
9 Count/Set indicator
8 Document Folder key
2 Icon area
1 SETTING key
20 OUTPUT
18 MODE setting area
setting area
21 Output icon area 19 DENSITY setting area 17 SIZE setting area
15 STORE key
14 Rotation OFF key
13 APPLICATION key
16 LENS setting area 12 ORIGINAL MODE key
1
2
3
4
5
6
7
SETTING key is selected when the screen displays basic copying conditions.
Touch this key to return to the current print job settings when making selections for
a reserve job.
When any trouble occurs during a reserve setting, “SETTING” changes to flashing
“JAM” or “ADD PAPER” according to the problem. See p. 5-7 to p. 5-9.
Icon area displays the following icons.
: ADD TONER icon is displayed when toner supply becomes low.
: PM icon is displayed when preventive maintenance is due.
: RADF icon is displayed when the RADF is used in a copying
operation.
: HDD Ready icon is displayed when the optional HD-103 Type-A Hard
Disk is mounted to show the status of the hard disk.
Date/Time indicator displays the current date and time.
RESERVE key is touched to select copy conditions for a subsequent job while the
current scan/print job is in progress.
Message area displays the machine status and procedure required at that time.
Job No. icon is displayed when [START] is pressed to start a reserve job of that
number.
Your service representative can set the machine to display the page count while
scanning the originals, and also the copy count when printing job starts, instead of
the job number.
Original counter indicates the original count scanned from the RADF or the platen
glass, and also indicates the page count on the left of the original count while
printing.
2-10
8
9
10
11
12
13
14
15
16
17
18
19
20
21
Document Folder key is touched when using Document Folder function.
Count/Set indicator indicates the print quantity entered from the control panel
keypad, and also indicates the print count on the left of the set count while printing.
Memory indicator indicates the remaining memory available for the next operation.
JOB LIST key is touched to view the current job status, to change the printing order
of reserve jobs, or to cancel printing a reserve job.
ORIGINAL MODE key is touched to specify the condition of originals to be
scanned.
APPLICATION key is touched to select various application functions.
Rotation OFF key is touched to release the Rotation function.
STORE key is touched to store scanned images into memory.
LENS setting area is used to select the desired magnification ratio.
SIZE setting area is used to select the desired paper size or APS.
MODE setting area is used to select the copy mode (1-1, 1-2, 2-1, or 2-2).
DENSITY setting area is used to specify the desired exposure level.
OUTPUT setting area is used to specify the desired output mode.
OUTPUT icon area displays the appropriate output icon according to the selected
output mode.
2-11
2
Machine
Information
Machine
Configuration
Turn On/Off
the Power
Loading
Paper
Changing
Paper Size
FS-113 Finisher
4 Finisher handle
2 Secondary (Sub) tray
3 Top cover
1 Primary (Main) tray
5 Finisher door
1
2
3
4
5
Primary (Main) tray holds sets output in Stack, Sort (offset), Staple, Group (offset),
or Punch mode.
Secondary (Sub) tray holds sets output in Stack mode, or special paper that
cannot be delivered to the primary tray.
Top cover opens to allow clearing mishandled paper.
Finisher handle withdraws the Finisher to allow removal of mishandled paper and
clearing the waste basket.
Finisher door opens to the internal Finisher to allow clearing mishandled paper.
2-12
2
7 Guide lever 1
Machine
Information
1 Waste basket
Machine
Configuration
Turn On/Off
the Power
Loading
Paper
Changing
Paper Size
2 Knob 1
3 Knob 2
8 Guide lever 2
4 Stapler
6 Staple holder
5 Dial
1
2
3
4
5
6
7
8
Waste basket holds waste paper punched out.
Knob 1 can be turned to ease removal of mishandled paper.
Knob 2 can be turned to ease removal of mishandled paper.
Stapler staples the copied sets.
Dial can be turned to the left to move the stapler to the centre for replacement of
the staple cartridge.
Staple holder is to be removed from the stapler when supplying staples.
Guide lever 1 opens to remove mishandled paper.
Guide lever 2 opens to remove mishandled paper.
2-13
FS-114 Finisher / PK-114 Punch Kit / BK-114 Branch Kit
1
2
FS-114 Finisher (option)
4
Finisher front door
7
Lever 3
Extensible tray
3
Branch kit (BK-114) (option)
6
8
9
Knob 2
5
Lever 1
Lever 4
Knob 5
10 Knob 6
11 Stapler transferring knob
12 Waste basket
1
2
3
4
5
6
7
FS-114 Finisher (option) sorts, staples and groups into finished sets.
Extensible tray can be withdrawn to hold large-sized copies.
Branch kit (BK-114) (option) holds copied sheets when installed in FS-114
Finisher.
Finisher front door opens to the internal Finisher to allow removal of mishandled
paper, clearing waste basket, or supplying staples.
Lever 1 opens downward to remove mishandled paper.
Knob 2 can be turned counterclockwise to ease removal of mishandled paper.
Lever 3 opens downward to remove mishandled paper after removing the waste
basket.
2-14
8
9
Knob 5 can be turned clockwise or counterclockwise to ease removal of
mishandled paper.
10 Knob 6 can be turned counterclockwise to ease removal of mishandled paper.
11 Stapler transferring knob can be turned to remove or set the stapler.
12 Waste basket holds waste paper punched out and can be withdrawn to clear.
2
Machine
Information
Machine
Configuration
Turn On/Off
the Power
Loading
Paper
Changing
Paper Size
2-15
SK-114 Saddle Kit
2
3
Saddle kit (SK-114) (option) (stapling part)
Saddle tray
1
FS-114 Finisher (option)
8
4
5
Finisher front door
Extensible tray
Branch kit (BK-114) (option)
6
Saddle kit reset handle
10 Knob 2
11 Lever 3
9
Lever 1
12 Lever 4
3
Saddle tray
13 Knob 5
14 Knob 6
15 Stapler transferring knob
17 Waste basket
16 Saddle kit (SK-114) (option) (folding part)
7
1
2
3
4
5
6
Saddle kit stapler
FS-114 Finisher (option) sorts, staples and groups into finished sets.
Saddle kit (SK-114) (option) (stapling part) staples at two positions in the centre of
output copies.
Saddle tray holds creased and stitched sets, and opens when supplying staples in
the stapler.
Extensible tray can be withdrawn to hold large-sized copies.
Branch kit (BK-114) (option) holds copied sheets when installed in FS-114
Finisher.
Saddle kit reset handle opens and then closes to reset the saddle kit (stapling
part) after supplying staples into the saddle kit stapler.
2-16
7
8
9
10
11
12
13
14
15
16
17
Saddle kit stapler staples into finished sets when using Fold&Stitch mode.
Finisher front door opens to the internal Finisher to allow removal of mishandled
paper, clearing waste basket, or supplying staples.
Knob 2 can be turned counterclockwise to ease removal of mishandled paper.
Lever 3 opens downward to remove mishandled paper after removing the waste
basket.
Knob 5 can be turned clockwise or counterclockwise to ease removal of
mishandled paper.
Knob 6 can be turned anticlockwise to ease removal of mishandled paper.
Stapler transferring knob can be turned to remove or set the stapler.
Saddle kit (SK-114) (option) (folding part) makes a fold line in the centre of output
copy.
Waste basket holds waste paper punched out and can be withdrawn to clear.
2-17
2
Machine
Information
Machine
Configuration
Turn On/Off
the Power
Loading
Paper
Changing
Paper Size
Turning On the Power Switch
To Turn On the Power
Usually, the main power switch should be kept ON so that the machine may function as
facsimile or printer.
The main power switch is located on the rear left side of the main body.
When the main power switch is turned ON, the main power indicator located on the far
left side of the control panel will go on.
When turning the main power switch OFF then ON, check that the main
power indicator located on the far left side of the control panel goes off
before turning it ON again.
To turn ON the power by the power switch:
1.
Turn ON the power switch.
The power switch is located on the far left side of the control panel.
Warm-up takes approximately 19 seconds or less.
2.
The Basic Screen will be displayed.
The message on the Basic Screen will inform you that copying job is possible.
2-18
Turning On the Power Switch (continued)
• When the initial settings are changed by the Key Operator, the modified
conditions will be displayed on the Basic Screen.
• When “Enter User ID” is displayed, enter your User ID to use the
machine.
2
Machine
Information
Machine
Configuration
Turn On/Off
the Power
To Turn Off the Power
1.
Loading
Paper
Turn OFF the power switch.
The power switch is located on the far left side of the control panel.
The touch screen and all the LEDs on the control panel except the main power
indicator will go out.
2.
Turn OFF the main power switch.
The main power switch is located on the rear left side of the main body.
The main power indicator will go out.
• When using the machine as facsimile or printer, do not turn off the main
power switch.
• When the machine is using the Weekly Timer function, turning off the
main power switch will deactivate the function.
2-19
Changing
Paper Size
Reducing the Power in Standby Mode (Auto Low Power)
This function automatically lowers the power after a specified period (initially 1 minute)
of copier inactivity. The [POWER SAVER ON/OFF] LED will be lit, the [START] LED will
turn orange to show copier inactivity, and all other LEDs except those of the main power
indicator and operation mode keys will be turned off.
The Auto Low Power function can be set to 1 minute/ 5 minutes/ 10 minutes/
15 minutes/ 30 minutes/ 60 minutes/ 90 minutes/ 120 minutes/ 240 minutes
in the Key Operator mode. For the Key Operator setting, see p. 13-43.
If the machine is not being used as a printer or fax, the power will be turned off after 1
minute of copier inactivity, as the Auto Shut-Off function activates at the same time.
To start a copying job, press any key on the control panel or touch the LCD screen.
The Auto Low Power will be released and the LCD screen recovers brightness.
• If the Auto Shut-Off function activates at the same time, the power will be
turned off without the LCD screen becoming dark.
• The LCD screen will not become dark during a duplex copying job or
when the Jam Position Screen is displayed.
Shutting Off Automatically (Auto Shut-Off)
This function automatically shuts off the power
after a specified period (15 minutes) of copier
inactivity.
The [POWER SAVER ON/OFF] LED will be lit. All
other LEDs and the LCD screen will be turned off.
To start a copying job, press [POWER SAVER
ON/OFF].
Copying will become available.
• The Auto shut-off can be set for 1 minute/ 5 minutes/ 10 minutes/ 15
minutes/ 30 minutes/ 60 minutes/ 90 minutes/ 120 minutes/ 240 minutes
in the Key Operator mode. For the Key Operator setting, see p. 13-43.
• When “Timer interrupt mode / Enter password” is displayed after pressing
[POWER SAVER ON/OFF], see p. 7-2 and follow the procedure to
continue.
2-20
Shutting Off / Reducing the Power Manually
2
Follow the procedure below to shut off or reduce the power manually.
1.
Machine
Information
Press [POWER SAVER ON/OFF].
Machine
Configuration
Turn On/Off
the Power
Loading
Paper
Changing
Paper Size
2.
The Power save mode will be activated.
The machine is initially set to automatically activate the Low Power mode.
The [POWER SAVER ON/OFF] LED will be lit, the [START] LED will turn orange to
show copier inactivity. All other LEDs except those of the main power indicator and
operation mode keys will be turned off.
The Key operator can set the machine to activate the Shut-Off mode when
[POWER SAVER ON/OFF] is pressed. See p. 13-43 to p. 13-46.
To release the mode, press [POWER SAVER ON/OFF].
The machine will be available for copying operation.
2-21
Entering an User ID (User Account)
The User Account (Electronic Key Counter) allows the Key Operator to monitor all
copying activities by controlling User ID accounts. Copy quantity limits for specific
accounts can be set.
The User Account (E.K.C.) is not factory-set. An User ID is required only when the User
Account is activated, a User Password is assigned, and “Enter User ID” is displayed on
the touch screen.
Use the following procedures to copy:
For details of the User Account setting, see p. 13-18 to p. 13-26.
1.
Enter User ID.
Enter your 8-digit User ID, using the keypad.
For setting a User ID, see p. 13-19 to p. 13-21.
If an invalid User ID is entered, continue by entering the correct ID.
2.
Press [START].
Your current copy count and copy limit will be displayed for 3 sec.
Current count / limit
018888/025000
3.
Start a copying job.
When the message changes to “Ready to copy,” copying job is available on the
machine.
When your copy count reaches the copy limit, the message “Copy limit
reached” will be displayed. In that case, contact the Key Operator to reset
your copy limit.
4.
*
Press [#] while pressing [ ].
The initial state will be restored, with the message “Enter User ID” displayed on the
screen.
2-22
Loading Paper
A paper indicator is shown on each tray key of the Basic Screen to indicate the paper
level of the tray. (Four levels are provided:
)
When paper in a tray becomes empty, the indicator “
2
Machine
Information
” appears on the tray key.
Machine
Configuration
Turn On/Off
the Power
Loading
Paper
Changing
Paper Size
Follow the procedure below to insert paper in the empty tray.
When the Multi-sheet bypass tray is empty, “ ” will be displayed on the
bypass tray key instead of the paper size indication.
The Key Operator can set the machine to indicate the paper type for each
tray selected on the screen. For details, see p. 13-28.
Loading Paper in Main Body Trays and DB-211 Trays
Main body trays: Tray 1 and 2
DB-211 trays: Tray 3 and 4
1.
Withdraw the main body tray or DB-211 tray.
See p. 2-2 to check positions of each tray.
Do not withdraw the tray forcibly; otherwise you may be injured.
2-23
Loading Paper (continued)
2.
Stack paper with curl side up.
Load paper, aligning it to the right side of the tray.
• Do not load paper above the red line on the side guide plates.
• Be sure that the rear guide plate is correctly positioned according to the
paper size loaded; otherwise machine trouble may occur.
3.
While pressing the release knob, move the side guide plate against
the paper.
Release the release knob to lock the slide guide plate.
Do not change the paper size indication of the size indication dial at the front
of the tray.
Copying using a tray with a different size indicated may cause a paper
misfeed.
4.
Push in the tray until it locks into place.
The indicator on the tray key will change from “
2-24
” to “
”.
Loading Paper in DB-411 Tray
2
DB-411 tray: Tray 3
1.
Machine
Information
Withdraw the DB-411 tray.
Machine
Configuration
Turn On/Off
the Power
See p. 2-2 to check positions of each tray.
Loading
Paper
2.
Changing
Paper Size
Stack paper with curl side up.
Load paper, aligning it to the right side of the tray.
The tray bottom will lower due to the stacker paper weight.
• Do not load paper above the right side plate of the tray.
3.
The indicator on the tray 3 key will change from “
” to “
”.
2-25
Loading Paper in LT-203 Large Capacity Tray
1.
Open the LCT top door.
2.
Open the paper feed roller.
3.
Load the paper into the LCT.
Load paper, aligning it to the left side of the tray.
• Do not load paper above the bent line of the guide plate.
2-26
4.
Close the LCT top door.
2
Machine
Information
Machine
Configuration
Turn On/Off
the Power
Loading
Paper
The indicator on the LCT key will change from “
” to “
Changing
Paper Size
”.
2-27
Loading Paper in Multi-Sheet Bypass Tray
1.
Open the Multi-sheet bypass tray located on the right side of the
copier.
When loading large paper, withdraw the right edge of the Multi-sheet bypass tray to
extend it.
2.
Load copy paper, and adjust the paper guides to the paper size.
The loaded paper size will be indicated on the bypass tray key of the Basic Screen.
• Load transparency film one sheet at a time.
• A maximum of 50 80g/m2. sheets can be loaded at one time.
3.
2-28
When copying is completed, close the Multi-sheet bypass tray.
Changing Paper Size of Main Body Trays and DB-211 Trays
The main body trays and DB-211 trays are user-adjustable. Change the paper size of
the tray according to the procedure below.
1.
2
Machine
Information
Withdraw the tray for which the paper size will be changed.
Machine
Configuration
Turn On/Off
the Power
2.
Loading
Paper
Remove the rear guide plate, then insert it into the position
designated for your desired paper size.
Changing
Paper Size
Remove the rear guide plate while pressing both edges of it.
The rear guide plate positions are marked on the tray base plate.
Be sure to insert the rear guide plate into the position of the paper size to be
set; otherwise machine trouble may occur.
3.
Set the size indication dial at the correct paper size.
Be sure that the correct paper size is indicated; otherwise a paper misfeed
may occur.
4.
The tray key on the Basic Screen will indicate the paper size currently specified.
2-29
Section 3:
3
Copying
Operations
3
Positioning
Originals
Copying Operations
How to Make a Basic Copy
Positioning Originals.................................................................................. 3-2
To Set Print Quantity ................................................................................. 3-7
To Stop Scanning/Printing ......................................................................... 3-8
Selecting Paper Size ................................................................................. 3-9
Selecting Magnification Ratio (Lens Mode) ............................................. 3-13
Selecting Density Level ........................................................................... 3-16
Making Double-Sided Copies (1-2, 2-2) .................................................. 3-18
Making Single-Sided Copies from Double-Sided Originals (2-1) ................................ 3-22
Copying Using Special Paper (Multi-Sheet Bypass Tray)................................. 3-24
Copying Using Memory ........................................................................... 3-26
Output Mode for Machine without Finisher.............................................. 3-32
Output Mode for Machine with Finisher................................................... 3-34
Stapling Output Copies (Staple) .............................................................. 3-38
Punching File Holes in Copies (Punch) ................................................... 3-42
Making Fold in Copies (Fold / Fold & Stitch) ........................................... 3-47
Output Mode for Machine with Inner Tray IT-101......................................... 3-50
Setting Print
Quantity
Stop
Scan/Print
Paper Size
Lens Mode
Density
1-2, 2-2
2-1
Multi-Sheet
Bypass Tray
Using
Memory
Output without
Finisher
Output with
Finisher
Staple
Punch
Fold /
Fold&Stitch
Output with
Inner Tray
Positioning Originals
Positioning Originals in RADF
The document feeder (RADF) automatically feeds up to 50 originals directly to the
platen area, starting with the top sheet. The RADF should only be used for unstapled,
smooth, flat originals.
Positioning originals in Normal mode
1.
Arrange originals in order.
• Before placing originals in the tray, be sure the document feeder is fully
closed. Once closed, do not open the document feeder, otherwise
selected copy conditions may be automatically altered.
• Be sure not to use unsuitable RADF originals. See p. 10-8 for details.
2.
Position original(s) FACE UP in the document feeder tray.
Place two-sided originals with page one FACE UP.
Up to 50 originals can be set at a time.
• Do not set more than 50 originals or set originals over the red line
indicated on the paper guides; otherwise a paper misfeed will occur.
• If the number of originals exceeds 50, divide them into blocks not
exceeding 50 sheets, then load them from the block with the first page.
See p. 3-26 to p. 3-27.
3.
3-2
Adjust paper guides.
Positioning Originals (continued)
Positioning originals in Mixed original mode
Mixed size originals can be copied together from the document feeder.
To use the Mixed original mode, see procedure on p. 8-4 to p. 8-5.
1.
3
Arrange the mixed size originals as illustrated below.
To the
depth
Copying
Operations
Positioning
Originals
To the left
Setting Print
Quantity
Stop
Scan/Print
Paper Size
Setting
direction
Lens Mode
Density
closed. Once closed, do not open the document feeder, otherwise the
selected copy conditions may be altered automatically.
1-2, 2-2
2-1
See p. 10-9 for allowable combinations of mixed originals.
2.
Position mixed originals FACE UP, aligned with the left rear side of the
document feeder tray.
3.
Multi-Sheet
Bypass Tray
Using
Memory
Output without
Finisher
Output with
Finisher
Staple
Punch
Fold /
Fold&Stitch
Output with
Inner Tray
3-3
Positioning originals in Folded original mode
Folded original mode detects the folded original size without using the size detection
sensor of the RADF.
To use the Folded original mode, see procedure on p. 8-6 to p. 8-7.
1.
2.
Position original(s) FACE UP in the document feeder tray.
closed. Once closed, do not open the document feeder, otherwise the
selected copy conditions may be altered automatically.
3.
3-4
Positioning Original on Platen Glass
Use the platen glass when originals are not suitable for use with the document feeder,
e.g., when size is incompatible, when originals are folded, stapled, torn, or in otherwise
poor condition.
1.
Raise the document feeder (or platen cover).
Place original FACE DOWN in the left rear corner, aligning the edge with the left
measuring guide.
3
Copying
Operations
Positioning
Originals
Setting Print
Quantity
Stop
Scan/Print
Paper Size
Lens Mode
2.
Gently close the document feeder (or platen cover) to prevent the
original from shifting on the glass.
Density
1-2, 2-2
2-1
Multi-Sheet
Bypass Tray
Using
Memory
Output without
Finisher
Output with
Finisher
When selecting Dual Page, Non-Image Area Erase, AUTO mode in Repeat,
or AUTO Layout, DO NOT CLOSE the document feeder or platen cover. For
details on each function, see Section 9.
3.
When repeating the original placement, press the release lever under
the document feeder.
Staple
Punch
Fold /
Fold&Stitch
Output with
Inner Tray
3-5
4.
Use only the lower cover to ease the original placement.
5.
When completed, close the upper unit of the document feeder.
Be sure to join the upper unit and lower cover of the document feeder
securely.
Do not place heavy originals and do not press strongly when a
thick original is placed on the platen glass and is under pressure of
the RADF; otherwise, the glass may be broken and you may be
injured.
3-6
Setting Print Quantity
This section describes how to set or change print quantity.
To Set Print Quantity
The copier is initially set to copy the original set in amounts determined by the print
quantity setting, then outputs sorted sets.
1.
3
Copying
Operations
Enter the desired print quantity on the control panel keypad.
Positioning
Originals
Setting Print
Quantity
Stop
Scan/Print
Paper Size
Lens Mode
Entered quantity will be displayed on the touch panel.
Density
To Change Print Quantity
1-2, 2-2
Follow the procedure below to change the print quantity after it has been entered.
1.
2-1
Multi-Sheet
Bypass Tray
Press [C (CLEAR)].
Using
Memory
Output without
Finisher
Output with
Finisher
Staple
Punch
The quantity displayed on the touch panel will return to 1.
2.
Fold /
Fold&Stitch
Enter the correct quantity.
Entered quantity will be displayed on the touch panel.
Output with
Inner Tray
3-7
To Stop Scanning/Printing
Follow the procedure below to stop scanning or printing.
1.
Touch to highlight the SETTING or RESERVE key for the printing/
scanning job to be cancelled.
The jobs can also be cancelled from the Job List Screen. See p. 3-30 for
details.
2.
Press [STOP].
The current machine operation of the selected job will stop immediately, and the data
stored in memory will be deleted.
3-8
Selecting Paper Size
To select an appropriate paper size for getting your desired copy result, use APS
(Automatic Paper Selection), or select paper size manually on the touch screen, as
required.
To Select Paper Size Automatically (APS)
APS detects the size of originals placed on the RADF or platen glass and automatically
selects and feeds copy paper of the same size, or selects an appropriate size according
to the magnification ratio selected.
• See the table on the following page for the relation of original size,
magnification ratio and copy paper size.
• The initial settings may have been altered by Key Operator. See p. 13-6 to
p. 13-15.
1.
Touch to highlight APS on the Basic Screen.
3
Copying
Operations
Positioning
Originals
Setting Print
Quantity
Stop
Scan/Print
Paper Size
Lens Mode
Density
1-2, 2-2
2-1
APS is already highlighted when the initial settings are restored.
2.
3.
Multi-Sheet
Bypass Tray
Select additional copy conditions, as desired.
Using
Memory
Enter the desired print quantity from the control panel keypad.
Output without
Finisher
See p. 3-7 for details on setting print quantity.
4.
Output with
Finisher
Position original(s).
Staple
• See p. 10-8 to p. 10-9 for paper sizes detectable from the RADF or on the
platen glass.
• See p. 3-2 to p. 3-6 for details on positioning originals.
• Key Operator can deactivate APS when original is set in the RADF or on
the platen glass. See p. 13-43 to p. 13-46.
5.
Press [START].
Punch
Fold /
Fold&Stitch
Output with
Inner Tray
• If the appropriate copy paper is not loaded in any tray, no copying will be
performed, and a message will prompt you to load the appropriate paper.
• Copy result may not be satisfactory due to the Rotation function. In this
case, turn the function OFF manually. See. p. 7-4.
3-9
Selecting Paper Size (continued)
See the table below for the relation of original size, magnification ratio and
copy paper size.
Original size
Magnification ratio
A3
B4
0.25 - 0.42
A5R
A5R
0.43 - 0.50
0.51 - 0.57 B5R
0.58 - 0.61 (B5)
B5R
0.62 - 0.71 A4R(A4) (B5)
0.72 - 0.77
A4R
(A4)
0.78 - 0.82 B4
0.83 - 0.86
B4
0.87 - 0.89
0.90 - 1.00
1.01 - 1.10
1.11 - 1.15
1.16 - 1.22
A3
1.23 - 1.41
A3
1.42 - 1.63
1.64 - 1.73
1.74 - 2.00
2.01 - 4.00
A4R
A4
Paper size
B5R
A5R
A5R
A4R
(A4)
B5
(B5R)
A4
(A4R)
B5R
(B5)
A4R
(A4)
B4
B4
A3
A3
A5R
0.25 - 0.42
0.43 - 0.50
0.51 - 0.57
0.58 - 0.61
A5R 0.62 - 0.71
0.72 - 0.77
B5
0.78 - 0.82
(B5R)
0.83 - 0.86
0.87 - 0.89
0.90 - 1.00
1.01 - 1.10
A4
(A4R) B5R 1.11 - 1.15
(B5)
1.16 - 1.22
A4R(A4) 1.23 - 1.41
1.42 - 1.63
A3
B4
1.64 - 1.73
1.74 - 2.00
A3
2.01 - 4.00
A5R
A5R
B5R
(B5)
B5
A3
(
3-10
Magnification ratio
Paper size
): Rotation functions
To Specify Desired Paper Size (AMS)
When a paper size is specified on the touch screen, an appropriate reduction or
enlargement ratio will be selected automatically according to the original size detected
from the RADF or the platen glass.
• See the table on the following page for the relation of original size, copy
paper size, and magnification ratio.
• Wide paper size can be specified when AMS is in use.
In this case, the same magnification ratio as that of the standard size will
be selected automatically.
• To copy in 1.00 (100%) magnification mode and specifying a paper size,
see p. 3-13.
1.
Touch a tray key on the Basic Screen to select the desired paper size.
3
Copying
Operations
Positioning
Originals
Setting Print
Quantity
Stop
Scan/Print
The selected tray key will be highlighted, and under LENS, -A- will also be highlighted.
Paper Size
Lens Mode
Density
1-2, 2-2
2.
3.
2-1
Multi-Sheet
Bypass Tray
Using
Memory
4.
Output without
Finisher
• See p. 10-8 to p. 10-9 for original sizes detectable from the RADF or on
the platen glass.
5.
Press [START].
Output with
Finisher
Staple
Punch
The scanned image will be printed on the specified paper size in the selection
magnification ratio.
Copy result may not be satisfactory due to the Rotation function. In this
case, turn the function OFF manually. See. p. 7-4.
3-11
Fold /
Fold&Stitch
Output with
Inner Tray
See the table below for the relation of original size, copy paper size, and
selection magnification ratio.
AMS Table: Rotation Copy ON
Paper size
Original size
A3
B4
F4
A4
A4R
B5
B5R
A5
A5R
A3
1.00
1.15
1.27
1.41
1.41
1.63
1.63
2.00
2.00
B4
0.86
1.00
1.10
1.22
1.22
1.00
1.41
1.73
1.73
A4
0.71
0.82
0.90
1.00
1.00
1.15
1.15
1.41
1.41
A4R
0.71
0.82
0.90
1.00
1.00
1.15
1.15
1.41
1.41
B5
0.61
0.71
0.78
0.86
0.86
1.00
1.00
1.22
1.22
B5R
0.61
0.71
0.78
0.86
0.86
1.00
1.00
1.22
1.22
A5R
0.50
0.58
0.64
0.50
0.71
0.58
0.81
1.00
1.00
AMS Table: Rotation Copy OFF
Paper size
Original size
3-12
A3
B4
F4
A4
A4R
B5
B5R
A5
A5R
A3
1.00
1.15
1.27
1.00
1.41
1.15
1.63
1.41
2.00
B4
0.86
1.00
1.10
0.86
1.22
1.00
1.41
1.22
1.73
A4
0.50
0.58
0.64
1.00
0.71
1.15
0.82
1.41
1.00
A4R
0.71
0.82
0.90
0.71
1.00
0.82
1.15
1.00
1.41
B5
0.43
0.50
0.55
0.86
0.61
1.00
0.71
1.22
0.86
B5R
0.61
0.71
0.78
0.61
0.86
0.71
1.00
0.86
1.22
A5R
0.50
0.58
0.64
0.50
0.71
0.58
0.81
0.71
1.00
Selecting Magnification Ratio (Lens Mode)
When the copier is turned ON, the magnification ratio is set to 1.00 (100%)
automatically on the Basic Screen.
Follow each procedure described in this section to select the desired magnification
ratio.
3
To Copy in 1.00 Magnification Mode
Copying
Operations
Follow this procedure to make a 100% copy of the original image.
1.
Close the RADF securely, then press [AUTO RESET].
Positioning
Originals
Setting Print
Quantity
Stop
Scan/Print
Paper Size
Lens Mode
The initial settings are restored. Check that APS indicates that the 1.00 magnification
is selected.
Density
1-2, 2-2
The initial settings may be altered by the Key Operator. See p. 13-6 to p. 1315.
2.
Multi-Sheet
Bypass Tray
Specifying paper size will release 1.00 magnification and set -A- (AMS)
automatically. In this case, touch 1.00 to highlight it again.
3.
Using
Memory
Output without
Finisher
Output with
Finisher
4.
2-1
Staple
Punch
See p. 3-2 to p. 3-6 for details on positioning originals.
5.
Fold /
Fold&Stitch
Press [START].
Output with
Inner Tray
3-13
Selecting Magnification Ratio (Lens Mode) (continued)
To Copy in Fixed Magnification Mode
Use the 6 preset ratios (0.71, 0.82, 0.86, 1.15, 1.22, 1.41) and 3 user preset ratios to
increase or decrease magnification in fixed amounts.
Specification for Fixed Magnification Mode
❒ Incompatible Conditions: AMS, Repeat mode in Repeat, Reduce & Shift in Image
Shift
1.
Touch ZOOM on the Basic Screen.
The popup menu for selecting the desired preset/user preset ratio will be displayed.
When starting a new copying job, be sure to close the RADF securely, then
press [AUTO RESET].
2.
Select the desired magnification, then touch OK.
The popup menu will disappear, and the selected ratio will be displayed on the Basic Screen.
Three user preset ratios are adjustable by the Key Operator. See p. 13-17.
3.
4.
5.
6.
3-14
Press [START].
Selecting Magnification Ratio (Lens Mode) (continued)
To Copy in Zoom Mode
Use the Zoom mode to reduce or enlarge the copied original image in 1% increments.
Specification for Zoom Mode
❒ Zoom range: 25% to 400%
❒ Incompatible Conditions: AMS, Repeat mode in Repeat, Reduce & Shift in Image
Shift
1.
3
Copying
Operations
Positioning
Originals
Setting Print
Quantity
Stop
Scan/Print
Paper Size
Lens Mode
The popup menu for setting a zoom ratio will be displayed.
Density
press [AUTO RESET].
2.
Touch the Vertical/Horizontal zoom key on the popup menu, if it is not
highlighted, then set the desired zoom ratio.
1-2, 2-2
2-1
Multi-Sheet
Bypass Tray
Use the keypad on the popup menu to enter the desired magnification ratio
in 3 digits, or use arrows (c / d) to scroll to the desired ratio.
If an incorrect ratio is entered, continue by entering the correct 3-digit ratio.
3.
Output without
Finisher
Touch OK.
The popup menu disappears automatically and the specified zoom ratio will be
displayed on the Basic Screen.
4.
5.
Using
Memory
Output with
Finisher
Staple
Punch
6.
Fold /
Fold&Stitch
Output with
Inner Tray
7.
Press [START].
3-15
Selecting Density Level
Automatic Exposure (AE) operates with the default settings. It detects the density of the
original image and automatically selects the appropriate exposure for the copy.
ABCD
E F G H
IJKLM
NOPQ
RSTUV
WXYZ
Light original
ABCD
E F G H
IJKLM
NOPQ
RSTUV
WXYZ
ABCD
E F G H
IJKLM
NOPQ
RSTUV
WXYZ
Normal
Dark original
To Select Copy Density
Select manual copy density to adjust exposure (density) when originals are too light or
too dark. Manual adjustments can be made in 9 levels on the Basic Screen.
1.
Touch DARKER to darken, or touch LIGHTER to lighten the copy
image.
Move the cursor (
) to the desired exposure level indicator.
press [AUTO RESET].
• Touch NORMAL to select the middle density level.
• To use the user-set density (Userset 1 or Userset 2), see p. 13-16.
• When resuming AE, touch AUTO.
2.
3.
3-16
Selecting Density Level (continued)
4.
5.
Press [START].
3
Copying
Operations
Positioning
Originals
Setting Print
Quantity
Stop
Scan/Print
Paper Size
Lens Mode
Density
1-2, 2-2
2-1
Multi-Sheet
Bypass Tray
Using
Memory
Output without
Finisher
Output with
Finisher
Staple
Punch
Fold /
Fold&Stitch
Output with
Inner Tray
3-17
Making Double-Sided Copies (1-2, 2-2)
The Basic Screen is initially set to 1-1 copy mode to make single-sided copies from
single-sided originals.
Follow the procedure below to make double-sided copies from the originals scanned
from the document feeder or from the platen glass.
Using RADF
Select the copy mode according to the original type (single-sided or double-sided).
Back
Back
Back
Back
Back
Single-sided original
1.
Front
Front
Front
Front
DuplexFront
copy
Back
Back
Back
1-2 Copying
Front
Front
Front
Front
Front
Front
Front
Front
Front
DuplexFront
copy
Back
Back
Back
Back
Back
Back
Front
Front
2-2 Copying
Front
Front
Front
Double-sided original
Touch 1a2 or 2a2 on the Basic Screen to highlight it.
press [AUTO RESET].
3-18
Making Double-Sided Copies (1-2, 2-2) (continued)
2.
Some incompatible conditions may automatically release the selected copy
mode. In this case, arrange the settings so that they are compatible with the
selected copy mode.
3.
Positioning
Originals
4.
Position originals FACE UP in the document feeder.
Setting Print
Quantity
• Use RADF store mode (p. 3-26 to p. 3-27) when the original count
exceeds 50.
5.
3
Copying
Operations
Stop
Scan/Print
Paper Size
Press [START].
The machine scans originals, then prints duplex copies when they are ready for output.
Press [STOP] to suspend the scanning or printing job.
Lens Mode
Density
1-2, 2-2
When the finisher / paper exit / inner tray capacity is exceeded due
to the print quantity selected, remove the copied sets as they exit;
otherwise, mishandled paper will occur.
2-1
Multi-Sheet
Bypass Tray
Using
Memory
Output without
Finisher
Output with
Finisher
Staple
Punch
Fold /
Fold&Stitch
Output with
Inner Tray
3-19
Using Platen Glass
Use the platen glass to scan originals unsuitable for the document feeder.
Specification for Double-Sided Copying Using Platen Glass
❒ Use the Platen store mode.
❒ See p. 10-8 for the information on unsuitable RADF originals.
❒ Incompatible Conditions: Using RADF, Non-Standard Size, OHP Interleave, Image
Insert
1.
Open the document feeder.
The RADF indication on the Basic Screen will disappear and the 1-2 and 2-2 keys will
be dimmed to show inactivity.
2.
Position original FACE DOWN on the platen glass.
Be sure to start from the first page.
• See p. 10-8 for original sizes detectable on the platen glass.
3.
Touch 1a2 on the Basic Screen to highlight it.
The STORE key will be highlighted automatically.
DO NOT press [AUTO RESET] at this point, otherwise the selected mode
will be released and the copier cannot scan the original placed on the glass.
4.
mode. In this case, arrange settings so that they are compatible with the
selected copy mode.
5.
6.
Press [START] to scan.
The front side image of the double-sided copy will be scanned into memory.
3-20
7.
Replace the original on the platen glass with the back side down, then
press [START].
Repeat this step until all originals are scanned.
Memory indicator on the upper right of the Basic Screen allows you to check
the remaining memory.
To delete the scanned data without printing, press [STOP].
8.
Touch STORE to exit the Store mode.
Positioning
Originals
STORE will return to the normal display.
9.
3
Copying
Operations
Setting Print
Quantity
Press [START] to print.
All the data in memory will be output.
Press [STOP] to suspend the printing job.
Stop
Scan/Print
Paper Size
Lens Mode
Density
1-2, 2-2
2-1
Multi-Sheet
Bypass Tray
Using
Memory
Output without
Finisher
Output with
Finisher
Staple
Punch
Fold /
Fold&Stitch
Output with
Inner Tray
3-21
Making Single-Sided Copies from Double-Sided Originals (2-1)
Use RADF and select 2-1 copy mode to make single-sided copies from double-sided
originals.
Back
Back
Back
Front
Front
Front
2-1 Copying
Front
Front
Double-sided original
1.
Front
Front
Front
Front
Front
Back
Back
Back
Back
Back
Simplex copy
Touch 2a1 on the Basic Screen to highlight it.
press [AUTO RESET].
2.
mode. In this case, arrange settings so that they are compatible with the
selected copy mode.
3.
4.
exceeds 50.
3-22
Making Single-Sided Copies from Double-Sided Originals (2-1) (continued)
5.
Press [START].
The machine starts to scan originals, then prints simplex copies when they are ready
for output.
3
Copying
Operations
Positioning
Originals
Setting Print
Quantity
Stop
Scan/Print
Paper Size
Lens Mode
Density
1-2, 2-2
2-1
Multi-Sheet
Bypass Tray
Using
Memory
Output without
Finisher
Output with
Finisher
Staple
Punch
Fold /
Fold&Stitch
Output with
Inner Tray
3-23
Copying Using Special Paper (Multi-Sheet Bypass Tray)
Use the Multi-sheet bypass tray to copy using special paper.
Specify the paper type to be loaded on the Multi-sheet bypass tray, as described below.
Do not use paper with any staples, or paper that conducts
electricity (silver, carbon, etc.), otherwise an accident may occur as
a result of fire.
To avoid machine trouble, do not use heat-sensitive paper, coloured OHP
film, or paper specifically designed for ink-jet printers, such as photo-paper.
When loading special paper in the main body tray or in the LCT to use on a
regular basis, the paper type should be specified in the Key Operator
setting. See p. 13-28.
1.
Open the Multi-sheet bypass tray, and load the copy paper.
See p. 2-28 for further details.
2.
Touch the Bypass key to highlight it.
The PAPER TYPE key will appear above the Bypass key. APS will be deselected, and
-A- will be highlighted on the Basic Screen.
3.
Touch PAPER TYPE.
The Paper Type popup menu will be displayed.
4.
Touch the desired paper type key.
When Thick Paper 1, Thick Paper 2, Thin, Rycycled Paper, Userset, Thin Paper,
OHP sheet is highlighted, a print job will conform to the selected paper type.
If no paper type indication is needed, touch Normal Paper.
The selection will be reflected on the Basic Screen when restored.
3-24
Copying Using Special Paper (Multi-Sheet Bypass Tray) (continued)
5.
6.
Touch OK to return to the Basic Screen.
See p. 9-16 to p. 9-17 for details on copying onto transparency films.
7.
3
Copying
Operations
8.
Position original(s) FACE UP in the document feeder or FACE DOWN
on the platen glass.
Setting Print
Quantity
Stop
Scan/Print
9.
Positioning
Originals
Press [START].
Paper Size
Lens Mode
Density
1-2, 2-2
2-1
Multi-Sheet
Bypass Tray
Using
Memory
Output without
Finisher
Output with
Finisher
Staple
Punch
Fold /
Fold&Stitch
Output with
Inner Tray
3-25
Copying Using Memory
This section describes various copying features available on this machine using its
built-in memory.
To Scan Originals into Memory (Store Mode)
Store mode allows you to scan all the originals first, then to start a continuous printing
job.
Use RADF store mode to scan a large amount of originals.
Use Platen store mode for originals that cannot be fed through the document feeder
due to thickness, size or condition.
RADF tray capacity is 50; however, more than 50 originals can be scanned
into memory using RADF store mode.
Specification for Store Mode
❒ Incompatible with RADF store mode: Image Insert, Dual Page
❒ Incompatible with Platen store mode: None
1.
Make copying selections, as desired.
press [AUTO RESET].
2.
Touch STORE on the Basic Screen to highlight it.
You may find the key already highlighted due to the copying selections made.
3.
3-26
Copying Using Memory (continued)
4.
Using platen glass:
Place original FACE DOWN. Start scanning from the first page.
When Dual Page, Non-Image Area Erase, Auto detection mode of Repeat,
or AUTO Layout is selected, keep the RADF (or platen cover) open
throughout the scanning procedure.
Using RADF:
Position originals FACE UP.
If the number of originals exceeds 50, divide them into blocks not exceeding 50 sheets
and load them from the block with the first page.
Positioning
Originals
Setting Print
Quantity
Stop
Scan/Print
5.
3
Copying
Operations
Paper Size
Press [START] to scan.
Lens Mode
Repeat steps 4 and 5 until all originals are scanned.
Memory indicator on the upper right of the Basic Screen allows you to check
the remaining memory.
To delete the scanned data without printing, press [STOP].
Should memory overflow occur frequently, it is recommended that you
contact your service representative to expand the memory capacity in your
machine.
6.
Density
1-2, 2-2
2-1
Multi-Sheet
Bypass Tray
Touch STORE to exit the Store mode.
Using
Memory
Output without
Finisher
Output with
Finisher
Staple
Punch
STORE will return to the normal display.
7.
Press [START] to print.
Fold /
Fold&Stitch
All the data in memory will be output.
Press [STOP] to suspend the printing job.
Output with
Inner Tray
3-27
To Set Next Copying Job (Reserve)
The Reserve function allows you to set up a new job while a current job is in progress.
When the current job is finished, the Reserve job starts printing immediately.
Specifications for Reserve
❒ Job settings: Max. 5 (current job plus 4 reserve jobs)
❒ When the current job is in Store mode, Image Insert, or Dual Page, the reserve job
setting will be available after the copier starts to print the current job.
❒ Incompatible Conditions: Interrupt copying, Scanning in Store mode
1.
Press [START] to start scanning/printing for the current job.
RESERVE will become active to show that the reserve job setting is now available.
2.
Touch RESERVE to highlight it.
The Reserve Job Setting Screen will be displayed.
On the Reserve Job Setting Screen, all keys on the LCD and control panel will function
for the reserve job.
3.
Select copy conditions for the reserve job, as desired.
When trouble occurs while setting the reserve job, the SETTING key on the
Basic Screen will change to JAM or ADD PAPER key. See p. 5-7 to p. 5-9.
4.
Position original(s) after completing the scan for the current job.
3-28
5.
Press [START] to start scanning the reserve job.
When setting more than one reserve job, the next reserve job setting will be
available after the copier starts to scan for the previous reserve job.
When completed, the Basic Screen for the current printing job will be restored.
Repeat steps 2 to 5 to reserve more than one job.
6.
3
Copying
Operations
Output of the reserve job will start automatically after completing the
current job.
Positioning
Originals
Setting Print
Quantity
Stop
Scan/Print
Paper Size
Lens Mode
Density
1-2, 2-2
2-1
Multi-Sheet
Bypass Tray
Using
Memory
Output without
Finisher
Output with
Finisher
Staple
Punch
Fold /
Fold&Stitch
Output with
Inner Tray
3-29
To Check/Control Jobs in Progress (Job List Screen)
The Job List Screen allows you to perform the following functions.
• Confirm machine status
• Delete reserve job
1.
• Change order of reserve job
• View unsuccessful job list
Touch JOB LIST on the Basic Screen.
The Job List Screen will be displayed.
Check the current status of the machine.
2.
Perform the desired setting on the screen.
The HDD capacity will be displayed instead of the File capacity, if the
optional HDD is installed in the machine.
See the next page for details of the screen.
To change the order of a reserve job:
Touch the lower/upper arrow key to highlight the desired reserve job, then touch
ADVANCE.
The highlighted reserve job is advanced by one in printing order unless the job
preceding it is already in progress.
To clear reserve job:
Touch the lower/upper arrow key to highlight the desired reserve job, then touch
DELETE. The Job Clear Confirmation Screen will be displayed.
Touch YES to clear the highlighted reserve job, or NO to cancel.
3-30
To display unsuccessful job list:
Touch Unsuccessful jobs to display
the Unsuccessful Job List Screen.
Touch
to scroll to the next page.
Up to 16 unsuccessful jobs (4 pages)
can be displayed.
3
Touch
to return to the previous
page.
Touch BACK to return to the Job List Screen.
3.
Copying
Operations
Positioning
Originals
Touch BACK on the Job List Screen.
The Basic Screen will be restored.
Setting Print
Quantity
Contents of Job List Screen
Stop
Scan/Print
JOB No. : Displays the No. (001-999) for each job assigned to the machine.
Paper Size
MODE:
Displays the machine’s current mode of operation. Three modes are listed below.
COPIER
FAX
PRINTER
SCANNER
Lens Mode
Density
STATUS: Displays the current status of the machine for each job.
ERROR
: Error in each mode
PRINTING : Printing in each mode
NO PAPER : No paper in each mode
STOP
: Stop in each mode
SCANNING: Scanning original(s) in copy mode
WAITING : Waiting to be output
NAME:
1-2, 2-2
2-1
Multi-Sheet
Bypass Tray
Displays the file name or the user name of the job, if specified.
TOTAL PAGE(s):
Displays the number of scanned pages for each job.
PAGE(s) LEFT:
Displays the remaining copy count of the job.
0 to 999
Copy count = No. of scanned pages x Print quantity
The count exceeding 999 will be displayed as “*999”.
MINUTE(s) TO GO:
Using
Memory
Output without
Finisher
Output with
Finisher
Displays the time (in minutes) required for completing the job.
Shorter than 1 minute: <1
2 ~ 999
Staple
Punch
The time displayed is an approximation; output may take slightly longer.
Fold /
Fold&Stitch
Output with
Inner Tray
3-31
Output Mode for Machine without Finisher
This section describes the output modes for the
copier without a Finisher.
The Stack mode is initially selected.
1 Stack mode copies the original set in amounts
determined by the print quantity setting, then
outputs sorted sets normally.
2 E-SORT+Sort mode rotates every other set by
90° upon exit, provided the same paper size is
loaded in two trays, one tray with paper loaded
in portrait orientation and the other tray with
paper loaded in landscape orientation, e.g., A4 and A4R.
3 Group mode copies each original page in amounts determined by the print quantity
setting, then outputs grouped sets normally.
4 E-SORT+Group mode rotates every other grouped set by 90° upon exit, provided
the same paper size is loaded in two trays, one tray with paper loaded in portrait
orientation and the other tray with paper loaded in landscape orientation, e.g., A4
and A4R.
Specifications for Output Modes without Finisher
❒ Incompatible with Group mode: Proof Copy, Sheet/Cover Insertion, Booklet, OHP
Interleave, Image Insert, Non-Image Area Erase, Repeat, AUTO Layout, Stamp
(Numbering)
❒ Incompatible with E-SORT+Sort mode: Mixed Original, Sheet/Cover Insertion,
Booklet, OHP Interleave, Non-Image Area Erase, Repeat, AUTO Layout
❒ Incompatible with E-SORT+Group mode: Using platen glass (unless Chapter with
Platen store mode, Image Shift, Flip Side 2, or Stamp (excluding Numbering) is
used), Proof Copy, Mixed Original, Sheet/Cover Insertion, Booklet, OHP Interleave,
Image Insert, Non-Image Area Erase, Repeat, AUTO Layout, Stamp (Numbering)
Originals
3
2
1
Stack (default)
3-32
E-SORT+Sort
Example:
3-set copies
Group
E-SORT+Group
Output Mode for Machine without Finisher (continued)
1.
When using E-SORT+Sort or E-SORT+Group mode, load the same
paper size into two trays in different orientation.
Stack mode is initially selected. Key Operator can change the initial output
mode. See p. 13-11 to p. 13-13.
2.
Select the desired output mode.
3
Copying
Operations
Positioning
Originals
Setting Print
Quantity
Stop
Scan/Print
Paper Size
Touch the desired output mode key to highlight it.
To select Stack mode, deselect all the keys.
3.
4.
Lens Mode
Density
1-2, 2-2
• See p. 10-3 to be sure that the exit tray capacity is not exceeded.
• See p. 3-7 for details on setting print quantity.
5.
2-1
Using
Memory
6.
Multi-Sheet
Bypass Tray
Output without
Finisher
Press [START].
Output with
Finisher
Staple
When the paper exit tray capacity is exceeded due to the print
quantity selected, remove the copied sets as they exit; otherwise,
mishandled paper will occur.
Punch
Fold /
Fold&Stitch
Output with
Inner Tray
3-33
Output Mode for Machine with Finisher
The machine with Finisher FS-113/FS-114 provides output modes as described below.
FS-114 Finisher
+ SK-114 Saddle kit
FS-114 Finisher
FS-113 Finisher
1 Stack mode means that the offset-stacker finisher modes are not selected. Copies
will be stacked upon exit without being offset by sorted sets.
2 Sort mode outputs multiple copies of the original set; each sorted set will be offset
by 30 mm upon exit.
3 Group mode groups together multiple copies of each original and offsets the sets by
30 mm upon exit.
Finisher FS-113 provides the ability to staple and punch. See p. 3-38 to use the Staple
mode, or see p. 3-42 to use the Punch mode.
Finisher FS-114 provides the ability to staple, punch, fold, and fold&stitch. See p. 3-38
to use the Staple mode, see p. 3-42 to use the Punch mode, and see p. 3-47 to use the
Fold or Fold&Stitch mode.
1
Stack
4
3
2
1
4
3
2
1
3
4
Example:
Make 3 copied sets
from 4 original sheets
Group
Sort
4
3
2
1
4
3
2
1
2
4
4
4
4
3
2
1
3
3
3
4
3
2
1
2
2
2
Offset by 30mm
1
1
1
Offset by 30mm
3-34
Output Mode for Machine with Finisher (continued)
Finisher FS-113 is equipped with a primary (main) and a secondary (sub)
exit trays.
Finisher FS-114 is equipped with two exit trays, and one optional exit tray
(BK-114 Branch kit) can be installed. Contact your service representative, if
desired.
The copier with FS-114 is initially set to output to tray 1 in Sort mode, and the copier
with FS-113 is initially set to output to the primary (main) tray in Sort mode.
Follow the procedure below to change the output mode, as desired.
Specifications for Output Modes with Finisher
❒ If using the transparent film to copy in the copier with FS-113, be sure to select the
secondary (sub) tray as an output tray.
❒ Incompatible with Sort mode: Using platen glass (unless Image Insert, Dual Page,
or Platen store mode is used), OHP Interleave, Non-Image Area Erase, Repeat,
AUTO Layout
(Numbering)
1.
3
Copying
Operations
Positioning
Originals
Setting Print
Quantity
Stop
Scan/Print
Paper Size
Lens Mode
Density
1-2, 2-2
Key Operator can change the initial output mode. See p. 13-11 to p. 13-13.
2.
2-1
(1) Touch OUTPUT on the Basic Screen to display the Output Mode popup menu.
Output Mode popup menu (FS-113)
Multi-Sheet
Bypass Tray
Using
Memory
Output without
Finisher
Output with
Finisher
Staple
Punch
Output Mode popup menu (FS-114 with SK-114 Saddle kit)
Fold /
Fold&Stitch
Output with
Inner Tray
3-35
(2) FS-113:
Select the desired output tray in the EXIT area, then select the desired output
mode in the OUTPUT MODE area.
If selecting Sub Tray, the Stack mode will be fixed and the output mode keys will
appear dimmed to show inactivity.
To select Stack mode using the primary (main) tray, deselect all the output mode
keys.
FS-114:
Select the desired output tray in the EXIT area, then select the desired output
mode in the OUTPUT MODE area.
To select Stack mode, deselect all the output mode keys.
3.
Touch OK to restore the Basic Screen.
The output icon of the selected output mode will be displayed in the OUTPUT icon
area.
4.
5.
See p. 10-3 for finisher capacity specifications.
6.
3-36
7.
Press [START].
3
Copying
Operations
Positioning
Originals
Setting Print
Quantity
Stop
Scan/Print
When the finisher exit tray capacity is exceeded due to the print
Paper Size
Lens Mode
Density
1-2, 2-2
2-1
Multi-Sheet
Bypass Tray
Using
Memory
Output without
Finisher
Output with
Finisher
Staple
Punch
Fold /
Fold&Stitch
Output with
Inner Tray
3-37
Stapling Output Copies (Staple)
The FS-113/FS-114 finisher provides the ability to staple.
Staple mode staples each sorted set. Up to 50 sheets (or a stack up to 5 mm thick) can
be stapled.
FS-113 Finisher
FS-114 Finisher
FS-114 Finisher
+ SK-114 Saddle kit
Specifications for Staple Mode
❒ Staple mode cannot offset the finished sets, or cannot be used with Group mode.
❒ Using excessively curled paper or some types of thin paper in Staple mode may
cause poor results in arrangement of the stapled sets.
❒ Incompatible with Staple mode: Using platen glass (unless Image Insert, Dual
Page, or Platen store mode is used), Booklet, OHP Interleave, Non-Image Area
Erase, Repeat, AUTO Layout
3-38
Stapling Output Copies (Staple) (continued)
1.
2.
Touch STAPLE on the Basic Screen to highlight it.
3
Copying
Operations
Positioning
Originals
Setting Print
Quantity
Stop
Scan/Print
The staple position icon will be displayed in the OUTPUT icon area.
Using FS-114, Tray 1 will be initially selected, while the primary (main) tray will be fixed
when using FS-113.
To change the output tray or staple position, follow the procedure below.
If the staple position currently set is desired, proceed to step 4.
3.
Paper Size
Lens Mode
Density
Touch OUTPUT on the Basic Screen to display the Output Mode
popup menu.
1-2, 2-2
FS-113:
Touch STAPLE twice to display the Staple Position Selection popup menu.
Select the desired staple position, then touch OK to restore the Output Mode popup
menu.
2-1
Multi-Sheet
Bypass Tray
Using
Memory
Output without
Finisher
Output with
Finisher
Staple
FS-114:
Select the desired output tray in the EXIT area.
Punch
Fold /
Fold&Stitch
Output with
Inner Tray
3-39
Touch STAPLE twice to display the Staple Position Selection popup menu.
Select the desired staple position, then touch OK to restore the Output Mode popup
menu.
4.
Touch OK to restore the Basic Screen.
The selected staple position icon will be displayed in the OUTPUT icon area.
5.
6.
See p. 10-3 to be sure that the finisher capacity is not exceeded.
7.
8.
Press [START].
3-40
Position originals as illustrated below to have the finished sets stapled in the
specified position.
3
Copying
Operations
Positioning
Originals
Setting Print
Quantity
Stop
Scan/Print
Paper Size
Lens Mode
Density
1-2, 2-2
2-1
Multi-Sheet
Bypass Tray
Using
Memory
Output without
Finisher
Output with
Finisher
Staple
Punch
Fold /
Fold&Stitch
Output with
Inner Tray
3-41
Punching File Holes in Copies (Punch)
The Punch mode is available when one of the following Finisher options is installed in
the machine.
FS-113 Finisher:
When the Punch mode is selected in combination with any of the Stack, Sort, Staple,
and Group modes, each copied sheet is punched and output to the primary (main)
according to the selected output mode. The secondary (sub) tray provides the Stack
mode only.
FS-114 Finisher:
When the Punch mode is selected in combination with the Stack, Sort, Staple, and
Group modes, each copied sheet is punched and output to the tray selected (tray 1, 2
or 3 if installed), according to the selected output mode.
FS-113 Finisher
FS-114 Finisher
+ PK-114 Punch kit
FS-114 Finisher
+ PK-114 Punch kit
+ SK-114 Saddle kit
Specifications for Punch Mode
❒ Be sure that the side guide plates of the paper tray are securely aligned to the
paper; otherwise the copies may not be punched in position.
❒ If the ATS (Automatic Tray Switching) functions while the machine uses the Punch
mode, the punch holes may be slightly off the appropriate positions.
❒ Number of punch holes: 4 holes
❒ Hole diameter: 6.5 mm ± 0.5 mm
❒ Hole pitch: 80 mm ± 0.5 mm
❒ Copy paper size: A3, B4, F4, A4, B5
Load the A4/B5 size paper in portrait orientation. If loaded in landscape orientation,
copied paper will be output without being punched.
❒ Paper weight: 60 ~ 90 g/m2 (80 g/m2 paper recommended)
❒ Incompatible with Punch mode: Using platen glass (unless Image Insert, Dual
Page, or Platen store mode is used), Booklet, OHP Interleave, Non-Image Area
Erase, Repeat, AUTO Layout
3-42
Punching File Holes in Copies (Punch) (continued)
3
Copying
Operations
Positioning
Originals
Setting Print
Quantity
Stack
Sort
4
3
2
1
4
3
2
1
4
3
2
1
4
3
2
1
Group
4
3
2
1
4
4
4
4
3
2
1
2
2
2
4
3
2
1
3
3
3
Offset by 30mm
2 staples
4
3
2
1
1
1
1
Offset by 30mm
Stop
Scan/Print
Staple
4
3
2
1
4
3
24
13
2
1
Paper Size
4
3
2
1
Lens Mode
Density
1 oblique staple
1-2, 2-2
2-1
Some staple positions previously selected may conflict with this function.
Do not punch special paper type such as transparent films, labels, etc.
Otherwise, machine trouble may occur.
1.
Using
Memory
Output without
Finisher
Output with
Finisher
2.
Multi-Sheet
Bypass Tray
Staple
Touch PUNCH on the Basic Screen to highlight it.
Punch
Fold /
Fold&Stitch
Output with
Inner Tray
The punch location icon will be displayed in the OUTPUT icon area.
To change the punch location, follow the procedure below.
3-43
3.
Touch OUTPUT on the Basic Screen to display the Output Mode popup
menu.
Select the desired output tray in the EXIT area, then select the desired output mode in
the OUTPUT MODE area.
Output Mode popup menu (FS-113 Finisher)
Output Mode popup menu (FS-114 Finisher + SK-114 Saddle Kit)
Touch PUNCH twice to display the Punch Location Selection popup menu.
Select the desired punch location, then touch OK.
Punch Location Selection popup menu (FS-113 Finisher)
Punch Location Selection popup menu (FS-114 Finisher + SK-114 Saddle Kit)
4.
Touch OK on the Output Mode popup menu to restore the Basic
Screen.
The selected punch location icon will be displayed in the OUTPUT icon area.
5.
3-44
6.
See p. 10-3 for the finisher capacity specifications.
7.
3
Copying
Operations
8.
Press [START].
Positioning
Originals
Setting Print
Quantity
Stop
Scan/Print
Paper Size
Lens Mode
Density
1-2, 2-2
2-1
Multi-Sheet
Bypass Tray
Using
Memory
Output without
Finisher
Output with
Finisher
Staple
Punch
Fold /
Fold&Stitch
Output with
Inner Tray
3-45
Position originals as illustrated below to have the finished sets punched in
the specified position.
3-46
Making Fold in Copies (Fold / Fold & Stitch)
The Fold and Fold & Stitch modes are available
only when the SK-114 Saddle kit is installed in FS114 Finisher.
The following copy results may be expected when
using Fold or Fold & Stitch mode:
• In the Fold mode, each copied sheet is creased
and output to the Saddle tray.
• In the Fold & Stitch mode, each copied set is
creased and stapled at two positions (saddle
stitched), then output to the Saddle tray.
3
Copying
Operations
Positioning
Originals
FS-114 Finisher
+ SK-114 Saddle Kit
Setting Print
Quantity
Specification for Fold / Fold & Stitch Mode
❒ The Booklet feature is automatically selected and indicated on the Application
Selection Screen. See p. 9-13 for details.
❒ AMS is automatically selected (can be released manually).
❒ Paper size: A3, B4, A4R
❒ Paper weight: 60 ~ 90 g/m2; Special stock (80 g/m2 paper is recommended)
❒ Max. number of sheets in Fold mode: Unlimited (creased one sheet at a time)
❒ Max. number of sheets in Fold & Stitch mode: 15 sheets (4 pages x 15 = 60 pages
max.)
❒ Staple position: 2 staples in the centre (saddle stitch), pitch 120 mm +/- 4 mm
(staple width 11 mm)
❒ Saddle tray capacity: 200 sheets or 20 sets
❒ Incompatible conditions with Booklet selected: APS, 1-1, 2-1, Sort, Staple, Group,
Punch, E-SORT+Sort, Mixed Original, Non STD size, Sheet/Cover Insertion,
Combination, OHP Interleave, Flip Side 2, Non-Image Area Erase, Repeat, AUTO
Layout
❒ Incompatible conditions without Booklet: Sort, Staple, Group, Punch, E-SORT+
Sort, E-SORT+Group, OHP Interleave, Reverse Image
Stop
Scan/Print
Paper Size
Lens Mode
Density
1-2, 2-2
2-1
Multi-Sheet
Bypass Tray
Using
Memory
Output without
Finisher
Output with
Finisher
Staple
Fold mode (creased)
Punch
Fold /
Fold&Stitch
Originals
(Booklet function is selected automatically.)
120mm ± 4mm
Output with
Inner Tray
Fold & Stitch mode
(Creased and stapled at
2 positions in the centre)
3-47
Making Fold in Copies (Fold / Fold & Stitch) (continued)
1.
2.
Touch OUTPUT on the Basic Screen to display the Output Mode
popup menu.
3.
Touch FOLD or FOLD&STITCH, as desired.
Selecting FOLD or FOLD&STITCH will automatically switch the output tray to Saddle
tray.
Any tray other than Saddle tray cannot be selected for Fold or Fold&Stitch
mode. Changing the selection of the output tray will release the Fold or
Fold&Stitch mode.
4.
Touch OK on the Output Mode popup menu.
The Basic Screen will be restored and the selection made in the output mode will be
reflected in the OUTPUT icon area.
AMS and 1-2 copy mode are automatically selected, and the APPLICATION key is
highlighted to indicate that Booklet function is automatically selected.
3-48
Making Fold in Copies (Fold / Fold & Stitch) (continued)
5.
• 2-2 copy mode is also available. Simplex copy mode (1-1 or 2-1) cannot
be selected.
• To release the Booklet selection, touch APPLICATION on the Basic
Screen to display the Application Selection Screen, then touch Booklet
to deselect it.
6.
Positioning
Originals
Setting Print
Quantity
7.
3
Copying
Operations
Stop
Scan/Print
When loading originals, heed the following limits on capacity:
Fold mode:
no limit
Fold & Stitch mode: 60 sheets or less (single-sided)
30 sheets or less (double-sided)
Exceeding the above capacity limits may cause trouble in the finisher.
Paper Size
Lens Mode
Density
8.
Press [START].
1-2, 2-2
2-1
When the Saddle tray capacity is exceeded due to the print
Multi-Sheet
Bypass Tray
Using
Memory
Output without
Finisher
Output with
Finisher
Staple
Punch
Fold /
Fold&Stitch
Output with
Inner Tray
3-49
Output Mode for Machine with Inner Tray IT-101
This section describes the following four output
modes for a copier with the Inner Tray.
The Inner Tray IT-101 is equipped with two exit
trays. The output to Tray 1 in Stack mode is
initially selected.
1 Stack mode copies the original set in amounts determined by the print quantity
setting, then outputs sorted sets normally.
2 E-SORT+Sort mode rotates every other sorted sets by 90° upon exit, provided the
same paper size is loaded in two trays, one tray with paper loaded in portrait
and A4R.
3 Group mode copies each original page in amounts determined by the print quantity
setting, then outputs grouped sets normally.
4 E-SORT+Group mode rotates every other grouped set by 90° upon exit, provided
the same paper size is loaded in two trays, one tray with paper loaded in portrait
and A4R.
Specification for Output Modes with Inner Tray
(Numbering)
❒ Incompatible with E-SORT+Sort mode: Mixed Original, Sheet/Cover Insertion,
Booklet, OHP Interleave, Non-Image Area Erase, Repeat, AUTO Layout
❒ Incompatible with E-SORT+Group mode: Using platen glass (unless Chapter with
Platen store mode, Image Shift, Flip Side 2, or Stamp (excluding Numbering) is
used), Proof Copy, Mixed Original, Sheet/Cover Insertion, Booklet, OHP Interleave,
Image Insert, Non-Image Area Erase, Repeat, AUTO Layout, Stamp (Numbering)
3-50
Output Mode for Machine with Inner Tray IT-101 (continued)
Originals
3
2
1
Stack (default)
E-SORT+Sort
Example:
3-set copies
Group
3
E-SORT+Group
Copying
Operations
Positioning
Originals
Setting Print
Quantity
Stop
Scan/Print
Paper Size
Lens Mode
Density
1.
When using E-SORT+Sort or E-SORT+Group mode, load the same
paper size into two trays in different orientation.
1-2, 2-2
2-1
Stack mode is initially selected. Key Operator can change the initial output
mode. See p. 13-11 to p. 13-13.
2.
Multi-Sheet
Bypass Tray
Select the desired output tray.
Using
Memory
Touch Tray 1 or Tray 2 on the Basic Screen.
Output without
Finisher
Output with
Finisher
Staple
Punch
3.
Fold /
Fold&Stitch
Touch OUTPUT on the Basic Screen.
The Output Mode popup menu will be displayed.
Output with
Inner Tray
3-51
Output Mode for Machine with Inner Tray IT-101 (continued)
4.
Touch the desired output mode key to highlight it.
To select Stack mode, deselect all the keys.
5.
Touch OK.
6.
7.
8.
9.
Press [START].
When the inner tray capacity is exceeded due to the print quantity
selected, remove the copied sets as they exit; otherwise ,
3-52
Section 4:
4
Helpful Functions
4
Helpful
Functions
Proof Copy
How to Use Helpful Functions
Making Sample Copy (Proof Copy) ........................................................... 4-2
Checking Feature Selections / Proof Copying (Check Mode).................................. 4-4
Interrupt Copying ....................................................................................... 4-6
Storing Job Conditions (Job Memory: Job Store) ......................................... 4-8
Recalling Stored Job Settings (Job Memory: Job Recall) ................................ 4-11
Displaying Screen for Operation Guide (Help Mode) .............................. 4-12
Check Mode
Interrupt
Mode
Job Memory
Help Mode
Making Sample Copy (Proof Copy)
Use Proof copy to produce a sample of the copied set before making multiple copies.
This is a convenient and cost effective way of viewing the results of the following
copying selections.
• Copying conditions using Store mode
• Sheet/Cover insertion
• Chapter
• Combination
• Booklet
• Image insert
• Dual Page
Specifications for Proof Copy
❒ Proof copy is available when using RADF or Platen store mode for multiple
originals.
❒ Proof copy is not compatible with Group or E-SORT+Group output mode.
1.
Select the desired copy conditions and enter the desired print
quantity.
press [AUTO RESET].
2.
3.
Press [PROOF COPY] on the control panel.
A sample copy will be output, and the Check Screen will be displayed.
• Press [STOP] to suspend the proof copying. In this case, the scanned
image data will not be deleted from memory.
• You can change selections with an asterisk (*) displayed on the left side
after proof copying.
4-2
Making Sample Copy (Proof Copy) (continued)
4
If the copy result is satisfactory, proceed to step 6.
If any setting changes are required, proceed to the next step.
Helpful
Functions
If the desired selection cannot be changed, press [STOP] to delete all the
data in memory, then press [AUTO RESET] to restart the job setting.
4.
Check Mode
Touch EXIT (or press [CHECK]) to return to the Basic Screen.
Change the settings, as required.
5.
6.
Proof Copy
Interrupt
Mode
Repeat steps 3 to 4 until the copy result becomes satisfactory.
Job Memory
Change the print quantity, as required.
Help Mode
Proof copy can be performed as needed, until the print quantity amount on
the Basic Screen reaches zero.
If required, change the print quantity on the Basic Screen.
7.
Press [START].
If the print quantity is not changed, the copier will output the rest, except the sample
sets.
4-3
Checking Feature Selections / Proof Copying (Check Mode)
Use the Check mode to confirm copying selections before starting print operation.
In this mode, also use Proof copy to produce a sample of the copied set before making
multiple copies.
Specifications for Check Mode and Proof Copy
❒ Proof copy is available when using RADF or Platen store mode for multiple
originals.
❒ Proof copy is not compatible with Group or E-SORT+Group output mode.
1.
Select the desired copy conditions and enter the desired print
quantity.
press [AUTO RESET].
2.
3.
Press [CHECK] on the control panel.
The Check Screen will be displayed.
Verify the settings made for the current job.
• If settings are OK, proceed to step 8.
• If a sample copy is needed, proceed to the next step.
4.
4-4
If any setting change is required before proofcopying, touch EXIT to
return to the Basic Screen, then change settings, as required.
Checking Feature Selections / Proof Copying (Check Mode) (continued)
5.
Touch PROOF COPY on the Check Screen.
A sample copy will be output.
• Press [STOP] to suspend the proof copying. In this case, the scanned
image data will not be deleted from memory.
• You can change selections with an asterisk (*) displayed on the left side
after proof copying.
4
Helpful
Functions
Proof Copy
Check Mode
If the copy result is satisfactory, proceed to step 7.
If any setting changes are required, proceed to the next step.
Interrupt
Mode
Job Memory
If the desired selection cannot be changed, press [STOP] to delete all the
data in memory, then press [AUTO RESET] to restart the job setting.
6.
Touch EXIT (or press [CHECK]) to return to the Basic Screen.
Change the settings, as required.
7.
Change the print quantity, as required.
Proof copy can be performed as needed, until the print quantity amount on
the Basic Screen reaches zero.
If required, change the print quantity on the Basic Screen.
8.
Press [START].
If the print quantity is not changed, the copier will output the rest, except the sample
sets.
4-5
Help Mode
Interrupt Copying
Use the Interrupt mode to interrupt copying in progress to perform a simple job.
When interrupt copying is completed, the settings for the initial job restore automatically
and the Basic Screen displays.
Interrupt copying is available when the copier is performing the following operations:
• Continuously printing the image stored in memory
• Scanning the originals into memory
• Scanning the originals into memory while printing in Reserve mode
The Interrupt mode cannot be selected with the following copier conditions:
• The Basic Screen is not displayed.
• The Call for Service message displays or a paper misfeed occurs.
The Auto Low Power or Auto Shut-off will not function during the Interrupt mode.
1.
Press [INTERRUPT] on the control panel.
The [INTERRUPT] LED turns on and the SETTING indicator on the Basic Screen
changes to INTERRUPT.
The timing to enter the Interrupt mode varies according to the job in
progress on the machine when [INTERRUPT] is pressed.
See the following page.
In Reserve mode, pressing [INTERRUPT] before the copier finishes
scanning the reserve job originals clears the settings selected for the
reserve job.
For details of Reserve mode, see p. 3-28 to p. 3-29.
4-6
Interrupt Copying (continued)
2.
Set copy conditions, as desired.
The initial settings in Interrupt mode are as follows.
Copy Mode : 1-1
RADF
: ON
Density
: AUTO
Lens Mode : 1.00 (100%)
Paper Size : APS ON
Print Quantity : 1
Output
: Primary (main) tray in Sort mode (FS-113)
The lowest tray in Sort mode (FS-114)
Tray 1 in Stack mode (IT-101) / Exit tray in Stack mode
4
Helpful
Functions
Remove any document from the platen glass or from the document feeder, if
present.
3.
Check Mode
Interrupt
Mode
4.
5.
Press [START] to start the interrupt copying.
Job Memory
When Interrupt copying is completed, press [INTERRUPT] again.
Help Mode
The [INTERRUPT] LED turns out and the INTERRUPT indicator on the Basic Screen
returns to the SETTING indicator.
The settings of the initial job will be restored on the Basic Screen.
6.
Proof Copy
Press [START] to resume copying.
For certain jobs in progress, copying will cease only after certain phases of
the immediate operation are completed, as indicated by the [INTERRUPT]
light conditions described below.
Collectively printing image stored in memory:
The light blinks until one set of the current job is printed. Then the light
remains steady for the temporary job performed in Interrupt mode.
Scanning originals into memory:
The light blinks until scanning is completed for all originals placed in the
document feeder. Then, the light remains steady for the temporary job
performed in Interrupt mode.
Scanning originals into memory while printing in Reserve mode:
The light blinks until the copier completes the current printing job, scans
all originals placed on the document feeder, and prints one set of the
Reserved job. The light remains steady for the temporary job performed
in Interrupt mode.
4-7
Storing Job Conditions (Job Memory: Job Store)
Use Job Store to store up to 15 frequently used copy job settings, which can be
recalled at any time. The stored jobs can be given alphabetical names.
Specifications for Job Memory
❒ All copying functions can be selected.
❒ Interrupt mode cannot be used while in Job Memory.
1.
Make job selections from the Basic Screen and/or Application
Selection Screen.
press [AUTO RESET].
2.
Press [JOB MEMORY] on the control panel.
The Job No. Selection Screen will be displayed.
3.
Touch ENTRY.
The Job Store Check Screen will be displayed.
To suspend the storing job, press [AUTO RESET].
Job Memory mode will be cancelled, and the Basic Screen will return from
any screen.
4-8
Storing Job Conditions (Job Memory: Job Store) (continued)
4.
Review the settings on the Job Store Check Screen.
4
Check that the selections made in step 1 are correctly entered.
Helpful
Functions
If any correction is required, touch CANCEL to return to the Basic Screen.
Make new selections, then restart the Job Store operation from step 2.
5.
Check Mode
Touch OK.
The Job No. Selection Screen will be restored.
6.
Proof Copy
Touch to highlight one of the keys numbered from 1~15 to store the
job under that number.
Interrupt
Mode
Job Memory
Help Mode
A blank key indicates that no job is stored under that number.
The job with a lock icon (
A job without a lock icon (
) is locked and cannot be selected.
) displayed can be overwritten.
To lock or unlock a job, and to delete a locked job, see p. 13-27.
If you wish to cancel the job number selection, touch CANCEL to restore the
Basic Screen, which displays the settings made in step 1.
If you wish to cancel the settings, press [AUTO RESET].
7.
Touch OK.
The Job Name Registration Screen will be displayed.
4-9
Storing Job Conditions (Job Memory: Job Store) (continued)
8.
Enter a job name.
Enter a job name in up to 24 characters, using the touch screen keypad.
If required, scroll with the upper and lower arrows to use lower case and symbol keys.
To correct an entry, touch DEL. repeatedly to delete each character entered, then
enter the correct job name.
9.
If you do not wish to enter a name, simply touch OK. The key displays
asterisks (*) in place of a name.
Touch OK.
The Job No. Selection Screen will be restored.
Check that the job name has been correctly entered.
10. Touch OK to complete the setting and return to the Basic Screen.
4-10
Recalling Stored Job Settings (Job Memory: Job Recall)
Use Job Recall to recall jobs that are already stored in Job Memory.
1.
Press [JOB MEMORY] on the control panel.
4
Helpful
Functions
Proof Copy
The Job No. Selection Screen will be displayed.
2.
Touch to highlight a job number key to select a job you want to recall.
Check Mode
Interrupt
Mode
Job Memory
Help Mode
3.
If desired, touch Job Check.
The Job Recall Check Screen displays to enable you to review the settings.
4.
Touch OK.
The settings of the selected job will be recalled on the restored Basic Screen.
To cancel the recall mode, touch CANCEL to return to the Basic Screen.
5.
Position original(s), then press [START] to print.
4-11
Displaying Screen for Operation Guide (Help Mode)
The Help Screen provides you with the information about the current screen mode and
about setting procedures. Help mode can be accessed from any screen except Job
Memory and Key Operator Screens.
Help mode provides two types of Help Screens according to the current screen mode:
1 Help Screen accessed from Basic Screen
2 Help Screen accessed from screens other than Basic Screen
To Display the Help Screen from Basic Screen
1.
Return to the Basic Screen, then press [HELP].
The Help Screen will be displayed.
2.
Touch the desired key to display specific information.
•
•
•
•
•
•
Saddle provides information on replacing staple cartridges of the Saddle kit.
Staple provides information on replacing staple cartridge.
PUNCH provides information on emptying trash basket.
RADF provides information on positioning originals in the document feeder.
Toner provides information on adding toner.
Tray, Option tray, BYPASS, and LCT provide information on loading paper in each
tray.
• HELP MENU displays the Help Menu Screen which provides a list of all of the copier
functions. When a function item is touched, the Help Screen displays information
specific to that topic.
• Key Operator displays the extension number of the Key Operator.
• For Assistance displays the phone/fax number of your service representative.
• Touch
on the Help Screen, if provided, to scroll to the next page.
Touch
to return to the previous page.
• Touch Key Ope mode to enter the Key Operator mode. See p. 13-2.
4-12
Displaying Screen for Operation Guide (Help Mode) (continued)
3.
Touch EXIT or press [HELP] to return to the Basic Screen.
Help Menu Screen
4
Helpful
Functions
Select one of the 8 help menu items on the Help Menu Screen to display
subsequent Help Screens.
Proof Copy
Touch
on the Help Screen, if provided, to scroll to the next page. Touch
to return to the previous page.
Check Mode
Touch MENU on the subsequent Help Screen to return to the Help Menu
Screen, then touch EXIT to restore the Basic Screen.
• “1. Hard keys” displays the information on control panel buttons.
• “2. Screen keys” displays the information on the keys provided on the
LCD touch screen.
• “3. RADF and Platen” displays the information on unsuitable RADF
originals and maintenance of the document feeder and platen glass.
• “4. Applications” displays the operational information on 15 application
functions provided on the Application Selection Screen.
• “5. Original setting” displays the information on functions provided on the
Special Original popup menu.
• “6. Output Mode” displays the information on Finisher functions.
• “7. Job memory” displays the information on Job Memory.
• “8. Document Folder” displays the information on Document Folder when
the optional hard disk (HD-103 Type-A) is equipped.
4-13
Interrupt
Mode
Job Memory
Help Mode
Displaying Screen for Operation Guide (Help Mode) (continued)
To Display Help Screen from Other Screens
1.
While in any screen other than the Basic Screen, press [HELP].
The Help Screen displays to provide the information about the current screen mode
and setting procedures.
2.
Touch EXIT.
The screen that was displayed before pressing [HELP] will be restored.
4-14
Section 5:
5
Troubleshooting
How to Handle Machine Troubles
When “Call for Service” Message Is Displayed ......................................... 5-2
Preventive Maintenance ............................................................................ 5-4
Clearing Mishandled Paper ....................................................................... 5-5
When “JAM” Appears on Folder Key ......................................................... 5-7
When “ADD PAPER” Appears on Folder Key............................................ 5-9
When “Memory Full” Message Is Displayed (Memory Overflow) ................................ 5-10
When Power OFF/ON Screen Is Displayed............................................. 5-12
Troubleshooting Tips ............................................................................... 5-13
5
Troubleshooting
Call for
Service
Preventive
Maintenance
Clearing
Mishandled
Paper
JAM Key
ADD PAPER
Key
Memory
Overflow
Power OFF/ON
Screen
Troubleshooting
Tips
When “Call for Service” Message Is Displayed
A “Call for Service” message indicates a machine condition that requires the attention
of your service representative.
The Call for Service Screen usually displays the telephone and facsimile numbers of
When the Call for Service Screen is displayed, be sure to contact
your service representative immediately by following the
procedure below.
1.
Make note of the Report code No. indicated in the second line of the
message area.
If your machine uses the Remote Diagnostics option and is automatically
monitored by your service representative, the Key Operator can call for
service using the Key Operator setting. See p. 13-50.
After calling for service using the Key Operator setting, be sure to turn OFF
the power switch and main power switch immediately, then unplug the
machine.
2.
Turn OFF the power switch and main power switch.
3.
4.
Unplug the machine.
5-2
Contact your service representative and report the condition and
code No.
When “Call for Service” Message Is Displayed (continued)
Limited Use of the Copier in Trouble
If the message shown below is displayed on the Call for Service Screen, you may
continue operating the copier on a limited function basis and utilize the trays and ADU
that are not affected by the trouble. To obtain this limited functionality of the copier,
consult your service representative. Be sure to utilize the limited function only
temporarily, and arrange for machine repair immediately.
1.
If the limited use of the copier is available, the following message is
displayed in the message area instead of the Report code.
ex.
5
Tray 2 failure
Press AUTO to select except this tray
Troubleshooting
2.
Press [AUTO RESET].
Call for
Service
Preventive
Maintenance
Please switch ON/OFF
E 18-2
Clearing
Mishandled
Paper
Make note of the Report code No.
JAM Key
3.
Turn OFF then ON the power switch.
A copying job can continue without using the troubled portion of the machine (ex. Tray
2).
ADD PAPER
Key
Memory
Overflow
Even if the copying job can be continued with the above operation, be
sure to contact with your service representative immediately when the
Call For Service Screen is displayed.
5-3
Power OFF/ON
Screen
Troubleshooting
Tips
Preventive Maintenance
After a set number of copies have been made on your copier, Preventive Maintenance
(PM) will be required for maintaining optimal performance.
When preventive maintenance is due, a message and PM icon (
prompt you to contact your service representative for maintenance.
5-4
) will
Clearing Mishandled Paper
When a paper misfeed occurs, the copier stops making copies and mishandled paper
codes display on the screen to indicate misfeed area(s). Copying operation cannot be
continued until all the misfeed locations are cleared.
GUIDE key
Touch to display the subsequent
screens for the disposal action.
Instruction message
area
An action will be
displayed.
Paper jam position
display
Numbers flashing or
lighting indicate the
jammed positions.
5
Troubleshooting
The above screen displays all the jam locations for the sake of explanation.
Only the relevant numbers appear when a paper misfeed actually occurs.
1.
Touch GUIDE on the screen.
Call for
Service
Preventive
Maintenance
Clearing
Mishandled
Paper
The screen illustrating the method for the disposal action will be displayed.
JAM Key
ADD PAPER
Key
Memory
Overflow
Power OFF/ON
Screen
Troubleshooting
Tips
Before performing the clearing procedure, see p. 1-2 for the caution label
locations inside the machine.
2.
Follow the procedure on the screen to remove misfed paper.
Touch
on the screen, if provided, to go to the next page of a series of illustrations.
When removing mishandled paper, be sure to leave no torn paper inside the
machine.
5-5
Clearing Mishandled Paper (continued)
3.
When completed, the Basic Screen will be restored.
If any misfeed remaining, the screen displays the next disposal procedure in the
instruction message area and the location number in the jam position display.
Repeat steps 1 to 2 until all the locations are cleared.
The internal drum unit and the area near the conveyance unit
cover (labeled 6) generates high voltage. To avoid bodily
electrical shock, DO NOT TOUCH the area.
The area near the internal fixing unit guide (labeled 5) is very hot.
To avoid getting burned, DO NOT TOUCH.
The roller shaft with the shaft cover on the inside of the right side
door of the main body may be hot when a large amount of copies
has been made. To avoid getting burned, DO NOT TOUCH. If the
shaft cover comes off, be sure to return it to its original position.
Be careful of removing staples stuck inside the machine so as not
to get injured.
The area exposed by opening the lever 4 inside the FS-114 Finisher
is very hot. To avoid getting burned, DO NOT TOUCH.
5-6
When “JAM” Appears on Folder Key
If a misfeed occurs with the print/scan job in progress while you are setting a reserve
job, SETTING folder key on the Basic Screen will change to flashing JAM.
Follow the procedure below to remove mishandled paper.
1.
5
Display the Jam Position Screen.
Troubleshooting
Touch JAM. The Jam Position Screen will be displayed.
Call for
Service
Preventive
Maintenance
Clearing
Mishandled
Paper
JAM Key
ADD PAPER
Key
If ADD PAPER is displayed instead of JAM, see p. 5-9.
Memory
Overflow
The above screen displays all the jam numbers for the sake of explanation.
Only the relevant numbers appear when a paper misfeed actually occurs.
2.
Troubleshooting
Tips
Touch GUIDE.
The screen illustrating the method for the disposal action will be displayed.
See p. 5-5 to p. 5-6 for details on clearing procedure.
3.
Follow the procedure on the screen to remove misfed paper.
When all procedures are completed, the Basic Screen will be restored.
JAM has changed to SETTING, and the settings for the current printing job
are displayed on the screen.
4.
Power OFF/ON
Screen
Press [START].
The scan/print job will resume.
5-7
When “JAM” Appears on Folder Key (continued)
5.
Touch RESERVE to continue the reserve job setting.
The internal drum unit and the area near the conveyance unit
cover (labeled 6) generates high voltage. To avoid bodily
electrical shock, DO NOT TOUCH the area.
The area near the internal fixing unit guide (labeled 5) is very hot.
To avoid getting burned, DO NOT TOUCH.
The roller shaft with the shaft cover on the inside of the right side
door of the main body may be hot when a large amount of copies
has been made. To avoid getting burned, DO NOT TOUCH. If the
shaft cover comes off, be sure to return it to its original position.
Be careful of removing staples stuck inside the machine so as not
to get injured.
The area exposed by opening the lever 4 inside the FS-114 Finisher
is very hot. To avoid getting burned, DO NOT TOUCH.
5-8
When “ADD PAPER” Appears on Folder Key
If the paper supply for a print job in progress becomes depleted while you are setting a
reserve job, SETTING on the Basic Screen will change to flashing ADD PAPER.
Follow the procedure below to continue the copying operation.
1.
5
Display the Basic Screen for the print job in progress.
Troubleshooting
Touch ADD PAPER. The Basic Screen for the print job will be displayed.
2.
Call for
Service
Check the empty tray, then supply that tray with paper.
Preventive
Maintenance
See p. 2-23 to p. 2-28 for details on loading paper.
3.
Clearing
Mishandled
Paper
Press [START].
The ADD PAPER will change to SETTING and the print job will resume.
4.
JAM Key
Touch RESERVE to continue the reserve job setting.
ADD PAPER
Key
Memory
Overflow
Power OFF/ON
Screen
Troubleshooting
Tips
5-9
When “Memory Full” Message Is Displayed (Memory Overflow)
In certain modes, this printer/copier uses memory to make operations convenient and
smooth. Occasional memory overflow may occur if the installed memory is inadequate
for the copy conditions selected.
To handle the Memory overflow condition while performing a job, take the appropriate
action described below. These actions enable you to continue the job or suspend the
job.
• Copying in Group mode without Store mode selected . . . . . Action 1
• Copying under conditions other than the above . . . . . . . . . . Action 2
Should memory overflow occur frequently, it is recommended that you
contact your service representative to extend the memory capacity in your
machine.
Action 1
Action 1 is required when the machine prematurely stops copying and displays the
Memory Overflow message after producing only one copied set, irrespective of the print
quantity setting.
1.
Wait until the current operation is completed.
The following Memory Overflow message is displayed on the touch screen, and all the
data in memory is erased.
If continuous working
check output after copying
2.
Check the original pages, then position originals again.
Positioning the same number of originals may cause the memory overflow
again. Arrange the original pages to lighten a burden to memory.
3.
5-10
Press [START] to complete the job.
When “Memory Full” Message Is Displayed (Memory Overflow) (continued)
Action 2
Action 2 is required when a job ceases with Memory Overflow messages displayed. In
this case, the scanned data still remains in memory.
Action 2 enables you to continue the job or suspend the job.
1.
Wait until the current operation is completed.
The machine stops copying after producing one copied set, irrespective of the set print
quantity. When scanning in Store mode, however, the machine stops without
producing a copied set.
At this time, all the data still remains in memory, and the following Memory Overflow
message is displayed on the touch screen.
5
-Memory full- Start=>START key
Cancel=>STOP key
2.
Troubleshooting
Call for
Service
Press [START] to continue copying.
The machine will output the scanned data for job completion in the amount remaining
in the print quantity setting.
To suspend the job, press [STOP] to save the job settings. All scanned data
will be erased.
Or, press [AUTO RESET] to clear the job and resume initial settings.
3.
Clearing
Mishandled
Paper
JAM Key
ADD PAPER
Key
The following message displays.
Memory
Overflow
If continuous working
check output after copying
Power OFF/ON
Screen
All the data in memory will be erased when this message is displayed.
4.
Preventive
Maintenance
Troubleshooting
Tips
Check the original pages, then press [START] to complete the job.
Check pages of the output set to confirm the amount of missing data, then complete
the job according to the print quantity remaining.
5-11
When Power OFF/ON Screen Is Displayed
When any trouble affects the electrical signal of the copier, the Power OFF/ON Screen
will be displayed.
Follow the procedure below to turn the machine power off then on.
1.
Turn OFF the power switch.
The main power switch does not have to be turned off.
2.
After a while, the power will be turned ON automatically.
If desired, turn ON the power switch manually.
5-12
Troubleshooting Tips
MACHINE DOES NOT OPERATE WHEN MAIN POWER SWITCH IS ON
Check to be sure main power switch is turned ON after the main power indicator on the
control panel goes off when turning OFF then ON the main power switch.
COPIER DOES NOT OPERATE WHEN POWER SWITCH IS ON
Fully insert paper trays.
Close RADF.
Check to be sure main power switch is ON.
Check to be sure power plug is firmly inserted in electrical socket.
COPY IMAGE IS TOO LIGHT
Manually adjust copy density to darker density.
Check toner indicator and add toner, if required.
Check paper for dampness. Do not leave paper in copier when humidity is high.
Check to see if Photo, Text, or Increase Contrast mode is required.
Check the Density shift.
5
Troubleshooting
Call for
Service
COPY IMAGE IS TOO DARK
Manually adjust copy density to lighter density.
Check to see if Photo, Text, or Increase Contrast mode is required.
Check the Density shift.
Preventive
Maintenance
Clearing
Mishandled
Paper
COPY IMAGE IS NOT CLEAN OR SHOWS SPOTS
Use clean originals since dirt marks may be copied.
Keep platen glass and inner surface of document feeder or platen cover clean.
Call for service if “Call for service” is displayed in the message area.
Check density indicator and lighten if required.
JAM Key
ADD PAPER
Key
COPY PAPER MISHANDLES DURING COPYING
Fan copy paper and load it with curl side in proper location. Do not exceed the tray
capacity.
Memory
Overflow
Power OFF/ON
Screen
Troubleshooting
Tips
COPY IMAGE CAN BE RUBBED OFF
Check copy paper thickness. Use Thick paper mode, if paper weight requires it.
MAGNIFICATION CANNOT BE CHANGED
Image Shift and Reduce & Shift are incompatible with magnification.
Press [AUTO RESET] and set desired copying conditions without using Image Shift or
Reduce & Shift.
THE TOUCH SCREEN PAPER SIZE INDICATOR DISPLAYS [!] ON THE TRAY
The [!] symbol indicates that the paper loaded in the tray is inconsistent with the tray
position setting.
DUPLEX MODES CANNOT BE SELECTED
Fully close ADU and RADF, then select Duplex mode again.
5-13
Troubleshooting Tips (continued)
COPYING DOES NOT BEGIN AFTER PRESSING [START]
Insert or adjust the appropriate paper tray for paper size selected.
Close document cover firmly.
Close right side door completely.
COPYING DOES NOT RESUME AFTER MISHANDLED PAPER IS REMOVED
Check copier diagram on touch screen for additional indications of mishandled paper.
COPY QUALITY IS POOR
Check paper for dampness, and replace it if necessary.
THE ORIGINAL PAPER IS MISHANDLED OR SKEWED IN THE DOCUMENT
FEEDER
Originals should conform to the recommended size and weight.
Be sure originals are not stapled.
Align originals evenly in the RADF.
Check to make sure paper guides meet the width of mixed size originals.
COPY IMAGE IS SKEWED WHEN BYPASS IS USED
Be sure copy paper is inserted straight.
USING USER ACCOUNT (EKC), COPIES CANNOT BE MADE AFTER PASSWORD
IS ENTERED
Check to see if the message EXCEEDS LIMIT is displayed.
Contact Key Operator to reset limit.
FINISHER DOES NOT OPERATE
Check for a paper misfeed and remove it, as required.
RADF INDICATOR WILL NOT LIGHT AFTER [AUTO RESET] IS PRESSED
Fully close RADF.
ADD TONER MESSAGE IS DISPLAYED
New toner supply is needed. Follow instructions for adding toner.
CALL FOR PM IS DISPLAYED IN MESSAGE AREA
Contact your service representative for Preventive Maintenance.
APS SELECTS THE WRONG PAPER SIZE
Paper guides must be adjusted exactly to the size of originals.
IN MIXED ORIGINAL MODE, A MESSAGE TO LOAD A REQUIRED PAPER SIZE
DISPLAYS, EVEN THOUGH THAT SIZE IS LOADED IN ONE OF THE TRAYS
Paper sizes loaded in the trays must be consistent with the tray position size;
otherwise, the [!] symbol will be displayed on the Paper Size indicator of the Basic
Screen.
THE BASIC SCREEN DOES NOT DISPLAY SETTINGS AS DESCRIBED IN USER’S
GUIDE
Check with the Key Operator, as Initial Settings may have been changed.
5-14
Troubleshooting Tips (continued)
“PLEASE CHECK ORIGINAL”
This message displays when the copier detects a non-standard paper size on the
platen glass.
Select paper size and press [START]. 1.00 magnification will be selected automatically.
If this message continues to display after selecting paper size, select 1.00
magnification, even if it is already indicated, then press [START].
If desired, ask your service representative to enable the machine to default to 1.00
magnification in this situation.
SHEET INSERTION RESULT IS NOT AS EXPECTED
Blank insertion: Be sure manuscript originals do not already include blank sheets in the
locations designated for sheet insertion.
Copy insertion: To ensure that chapter sheets in 1-2 mode always appear on the right
hand side in the finished set, insertion sheets must be designated on the page setting
screen with odd numbers, not even. If required, make an even numbered original page
odd by inserting a blank sheet in front of that page, so that the blank sheet is even and
the insertion sheet is odd.
COPIES SKEW IN THE STAPLED SETS
Check to see if copy paper is excessively curled in the tray.
Reload the copy paper upside down.
5
Troubleshooting
Call for
Service
Preventive
Maintenance
COPIES CANNOT BE STAPLED OR PUNCHED IN POSITION
Check to make sure the side guide plates are securely aligned to the copy paper in the
paper tray to be used.
USING PUNCH, COPIES CANNOT BE PUNCHED (FS-114 FINISHER WITH PK-114
PUNCH KIT)
Check to see if the message “Confirm waste basket. Empty the waste paper and insert
well” is displayed.
Empty the waste basket.
Clearing
Mishandled
Paper
JAM Key
ADD PAPER
Key
Memory
Overflow
Power OFF/ON
Screen
Troubleshooting
Tips
5-15
Section 6:
6
Machine Specifications
Main Body & Option Specifications
Main Body Specifications .......................................................................... 6-2
Option Specifications................................................................................. 6-3
6
Machine
Specifications
Main Body Specifications
Main Body
Name:
Type:
Transfer method:
Platen glass:
Light-sensitive unit:
Light source:
Developing method:
Fixing method:
Density adjustment:
Magnification ratio:
Copy paper:
Copying speed:
Continuous copying:
Types of original:
Original size:
Copy size:
Paper supply method:
Warm-up time:
First copy time:
Power:
Power consumption:
Sound power level:
Weight:
Size:
Effective size*:
7222/7228/7235
Desktop type
Laser electrostatic method
Fixed
OPC
Xenon lamp
Dry, 2-component magnetic brush developing
Heat roller
Automatic and manual (9 steps)
1:1 ± 1.0%
Enlargement: 1:1.150 (115%), 1:1.220 (122%), 1:1.410 (141%)
Reduction: 1:0.860 (86%), 1:0.820 (82%), 1:0.710 (71%)
Zoom/Special ratio magnification ratio: 25% to 400% in 1%
increments
Plain paper: 60 to 105 g/m2 for main body and drawer base trays
50 to 130 g/m2 for Multi-sheet bypass tray
Special paper: OHP film, Labels, Tab, 3-hole
7222: 22 copies/min. (A4), 18 copies/min. (A4R), 14 copies/min. (A3),
22 copies/min. (B5), 16 copies/min. (B4), 19 copies/min. (B5R)
1 to 999 copies
Sheet, book originals
A3 maximum; Max. 30 mm thick, 6.8 kg (for RADF)
A3 to A5 size (image cutoff width: leading end 1.5 mm ± 0.5mm,
front page trailing end 3 mm ± 1 mm, back page trailing end 4.5 mm
± 1.5mm, top and bottom 1.5 mm ± 0.5mm)
Tray 1, 2 (universal); 500 sheets (80 g/m2)
Tray 3, 4 (universal); 500 sheets (80 g/m2) (DB-211 option)
Tray 4 (fixed); 1,500 sheets (80 g/m2) (DB-411 option)
LCT (fixed); 2,000 sheets (80 g/m2) (LT-203 option)
Multi-sheet bypass tray; 50 sheets (80 g/m2)
19 seconds or less
7222/7228: 4.9 seconds (A4)
7235:
4.3 seconds (A4)
AC 230V/50Hz (This equipment selects the correct voltage
automatically.)
1.5 KW max. (with option)
65.6 dB (7222) / 67.4 dB (7228) / 69.5 dB (7235) or less during
copying
Approx. 91.2 kg (main body + RADF)
595(W) x 655(D) x 815(H) mm (main body + RADF)
1,614(W) x 655(D) x 1,134(H) mm (main body + RADF + FS-113 +
DB-211/411 + LT-203)
1,358(W) x 655(D) x 1,134(H) mm (main body + RADF + FS-114 +
DB-211/411 + LT-203)
1,095(W) x 1,405(D) mm (main body + RADF)
2,315(W) x 1,405(D) mm (main body + RADF + FS-113 + DB-211/
411)
*Effective size is dimensions required when the Multi-sheet bypass
tray is opened.
These specifications are subject to change without notice.
6-2
Option Specifications
RADF (DF-320)
Function:
Type of original:
Original size:
Original capacity:
Original insertion:
Dimensions:
Weight:
Power source:
Feeds 1- and 2-sided originals automatically
Plain paper (50 to 130 g/m2)
A3, B4, F4, A4, A4R, B5, B5R, A5, 11”x17”, 8.5”x14”, 8.5”x11”
50 sheets max. (80 g/m2)
Automatic feed at a time
576(W) x 502(D) x 100(H) mm
Approx. 11 kg
Supply from main body
FS-113 In-Bin Stapler Finisher
Type:
Sorting system:
Paper sizes:
Number of stapled sheet:
Staple cartridge:
Number of punch holes:
Hole diameter:
Hole pitch:
Dimensions:
Weight:
Power source:
Offset catch tray
Sorting by shifting (30±2 mm) (copies are delivered face down)
A3, B4, F4, A4R, A4, B5R, B5, A5, B6, 11”x17”, 8.5”x14”, 8.5”x11”,
8.5”x11”R, 5.5”x8.5” (50 to 130 g/m2 paper)
50 sheets max. or 5 mm or less (80 g/m2 paper)
5,000 staples x 2
4
6.5 mm ± 0.5 mm
80 mm ± 0.5 mm
538(W) x 637(D) x 976.6(H) mm
Approx. 39.2 kg
FS-114 In-Bin Stapler Finisher
Type:
Sorting system:
Paper sizes:
Number of stapled sheet:
Staple cartridge:
Dimensions:
Weight:
Power source:
Offset catch tray
Sorting by shifting (30 ± 2 mm) (copies are delivered face down)
A3, B4, F4, A4R, A4, B5R, B5, A5, B6, 11”x17”, 8.5”x14”, 8.5”x11”,
8.5”x11”R, 5.5”x8.5” (50 to 130 g/m2 paper)
50 sheets max. or 5 mm or less (80 g/m2 paper)
5,000 staples
323(W) x 552(D) x 566(H) mm
With BK-114 installed; 436(W) x 552(D) x 575(H) mm
Approx. 21.4 kg
IT-101 Inner Tray
Type:
Sorting system:
Paper sizes:
Dimensions:
Weight:
Power source:
Offset catch tray
Sorting by shifting (30 ± 2 mm) (copies are delivered face down)
A3, B4, F4, A4R, A4, B5R, B5, A5, B6, 11”x17”, 8.5”x14”, 8.5”x11”,
8.5”x11”R, 5.5”x8.5” (60 to 90 g/m2 paper)
430/582*(W) x 449(D) x 137(H) mm
* When the tray is extended.
Approx. 3.6 kg
6-3
6
Machine
Specifications
Option Specifications (continued)
PK-114 Punch Kit
Function:
Number of punch holes:
Hole diameter:
Hole pitch:
Paper sizes:
Paper weight:
Dimensions:
Weight:
Power source:
Punches file holes in copies
4 holes
6.5 mm ± 0.5 mm
80 mm ± 0.5 mm
A3, B4, F4, A4, B5
50 to 130 g/m2 paper
114(W) x 461(D) x 136(H) mm
Approx. 1.9 kg
Supply from FS-114 Finisher
SK-114 Saddle Kit
Function:
Paper sizes:
Paper weight:
Max. number of sheets:
Staple position:
Saddle tray capacity:
Staple cartridge:
Dimensions:
Weight:
Power source:
Makes a fold in copies and/or staples to make a booklet-styled set
A3, B4, A4R, B5
60 to 90 g/m2 paper
Fold mode: Unlimited (creased one sheet at a time)
Fold & Stitch mode: 15 sheets (4 pages x 15 = 60 pages max.)
2 staples in the centre (saddle stitch), pitch 120 mm +/- 4 mm
(staple width 11 mm)
200 sheets or 20 sets
2 (2,000 staples/cartridge)
Stapling part; 445(W) x 478(D) x 203(H) mm
With BK-114 installed; 576(W) x 478(D) x 281(H) mm
Folding part; 48(W) x 399(D) x 146(H) mm
Approx. 9.3 kg
Supply from FS-114 Finisher
DB-211 Drawer Base Unit
Function:
Number of trays:
Paper sizes:
Types of paper:
Capacity:
Dimensions:
Weight:
Power source:
Feeds paper into main body
2
A3, B4, A4R, A4, B5R, B5, A5R, 11”x17”, 8.5”x11”, 8.5”x11”R
60 to 90 g/m2 paper (normal or recycled)
Tray 3; 500 sheets
Tray 4; 500 sheets
580(W) x 590(D) x 304(H) mm
Approx. 26 kg
DK-110 Desk Unit
Function:
Number of trays:
Weight:
Accommodates copy paper or copy materials
1 (for storage)
Approx. 17 kg
6-4
Option Specifications (continued)
DB-411 Drawer Base Unit
Function:
Number of trays:
Paper sizes:
Types of paper:
Capacity:
Dimensions:
Weight:
Power source:
1
A4 fixed (changeable to A4R, B5, B5R, 8.5”x11” or 8.5”x11”R)
1,500 sheets
580(W) x 590(D) x 304(H) mm
Approx. 24.5 kg
LT-203 Large Capacity Tray
Function:
Paper sizes:
Types of paper:
Capacity:
Dimensions:
Weight:
Power source:
A4 fixed (changeable to 8.5”x11”)
2,000 sheets
339(W) x 515(D) x 299(H) mm
Approx. 13 kg
6
Memory Unit
Machine
Specifications
MU-404:
MU-405:
64MB
128MB
Others
FK-103 Fax Kit
FL-103 Fax Line Expansion Kit
BK-114 Branch Kit (for FS-114 Finisher)
HD-103 Type-A Hard Disk Unit
IP-424 Image Processor
PS-346 PostScript 3 Unit
CF-101 Compact Flash Memory (for downloading fonts)
RU-101 Relay Unit (for FS-113 Finisher)
ET-101 Exit Tray
CV-109 Platen Cover
Key Counter
6-5
Advanced
7
8
9
10
11
12
13
Advanced
Information
Special
Original
Applications
Paper &
Original Info
Supplies
Maintenance
Key Operator
Mode
Section 7:
7
Advanced Information
How to Use Advanced Functions
Programmed Shut-Off (Weekly Timer) ...................................................... 7-2
Rotation ..................................................................................................... 7-4
Vertical/Horizontal Zoom Mode ................................................................. 7-5
Weekly
Timer
Rotation
Vertical/Horizontal Zoom
7
Advanced
Information
Programmed Shut-Off (Weekly Timer)
The Weekly Timer function turns a copier on and off at the time specified by the Key
Operator.
This function is not factory-set. When a copier is under control of the Weekly Timer
function, the Timer Interrupt mode message will be displayed after pressing the power
switch, and copying is unavailable.
However, copying can be available by using the following procedure.
Timer Interrupt
1.
Press the power switch.
For details of the Weekly Timer function, see p. 13-33 to p. 13-40.
The Basic screen will be displayed along with the message shown below.
Timer interrupt mode
Enter password
The machine power will be turned off automatically after 5 minutes from this
state if a password is not entered.
The Timer Interrupt password is not factory set and must be entered by the Key
Operator.
In the event the Timer Interrupt password has not been entered by the Key Operator,
the following message will display instead.
Input copy time
0 hour(s)
05 minute(s)
When the above message displays, proceed to step 4.
2.
Enter the password.
Enter a 4-digit number Timer Interrupt password using the keypad on the control
panel.
For setting the Timer Interrupt password, see p. 13-40.
7-2
Programmed Shut-Off (Weekly Timer) (continued)
If an invalid password is entered, continue by entering the valid 4-digit
password.
3.
Press [START].
The following message will be displayed on the Basic Screen.
Input copy time
0 hour(s)
4.
05 minute(s)
Set the duration for the interrupt use.
Enter a 1-digit hour (ex. 3 hours is 3) using the keypad on the control panel. (0 ~ 9)
5.
Press [START].
Weekly
Timer
6.
Set the minute for the interrupt use.
Rotation
Enter a 2-digit minute (ex. 7 minutes is 07) using the keypad on the control panel.
7
Entering a number smaller than 5 will set the time to 5 minutes.
7.
Advanced
Information
Press [START].
Copying is available until the set time is expired.
8.
When Timer Interrupt of the copier is finished, press [POWER SAVER
ON/OFF] for one second or longer, then release it.
The copier returns to the OFF condition and copying is again disabled.
7-3
Rotation
This function allows you to utilize APS or AMS and copy the original documents onto
size A4, irrespective of the copy paper feeding direction.
By default, Rotation requires APS or AMS to function. The Key Operator
can set this function ON, or to operate when APS, AMS or reduce functions.
Also, Rotation of copy enlarge function can be turned ON/OFF. See p. 13-43
to p. 13-46.
Original
Copy
A4
A4R
A3
A4
Rotation copy
of Enlarge
ON
OFF
A4R
A4R
A4
A4
A4
A4
A3
11"x17"
A3
11"x17"
The copier is initially set to activate the Rotation function automatically.
Follow the procedure below to release/resume this function.
1.
Touch Rotation OFF on the Basic Screen to highlight it.
The Rotation function is canceled.
2.
7-4
To resume Rotation, touch Rotation OFF to deselect it.
Vertical/Horizontal Zoom Mode
Use the Vertical/Horizontal zoom mode to reduce or enlarge vertical and horizontal
dimensions, independently.
Vertical/Horizontal Zoom Mode Specifications
❒ Vertical/Horizontal zoom range: 0.25~4.00
❒ Incompatible Conditions: APS, AMS, Reduce & Shift in Image Shift, Repeat mode
in Repeat
The figure shown below is a sample image using the Vertical/Horizontal zoom.
Length: 0.50, Width: 0.50
Weekly
Timer
Rotation
Width
Length
7
Advanced
Information
7-5
Vertical/Horizontal Zoom Mode (continued)
1.
The popup menu for setting a zoom ratio will be displayed.
press [AUTO RESET].
2.
Touch the vertical zoom key on the popup menu to highlight it, then
set the vertical zoom ratio.
Use the keypad on the popup menu to enter a 3-digit vertical zoom ratio, or use arrow
keys (c/d) to scroll to the desired ratio.
Similarly, touch the horizontal zoom key to highlight it, then set the horizontal zoom
ratio.
3.
Touch OK.
The popup menu disappears automatically and the specified zoom ratio will be
displayed on the Basic Screen.
4.
5.
6.
7.
7-6
Press [START].
Vertical/Horizontal Zoom Mode (continued)
The figure shown below is the sample image using the Vertical/Horizontal
zoom with an original placed diagonally on the platen glass.
30
Weekly
Timer
30
Rotation
7
Advanced
Information
7-7
Section 8:
8
Special Original
How to Make a Copy of Special Original
Making Copy Quality Closer to Originals (Text/Photo Enhance) .............................. 8-2
Copying Mixed Size Originals (Mixed Original) ......................................... 8-4
Copying Folded Originals (Folded Original)............................................... 8-6
Copying Non-Standard Size Originals (Non-Standard Size).......................... 8-8
Text/Photo
Enhance
Mixed
Original
Folded
Original
Non-Standard
Size
8
Special
Original
Making Copy Quality Closer to Originals (Text/Photo Enhance)
Use this function to enhance the reproducibility of half tones so that the copy quality
more closely matches to that of the original.
Text Mode
Use the Text mode when copying a text original. In this mode, text is improved in
comparison to using the general mode.
Photo Mode
Use the Photo mode to reproduce a half-tone photo image. The copy will closely
represent the half-tones of the original image.
Increase Contrast Mode
Select Increase Contrast to darken lightly printed images (e.g., pencil) without changing
background exposure. In cases where the image is light and background is dark, the
background will not be changed.
• In each enhance mode, the copy density level can be shifted darker or
lighter (Density Shift). See p. 13-49 if this setting is desired.
• PHOTO/TEXT mode is initially selected. To change this initial setting, see
p. 13-15.
Specifications for Text/Photo Enhance
❒ Incompatible Copying Conditions: None
Original
Auto mode
Photo mode
Original
Original
1.
Auto mode
Auto mode
Increase contrast
mode
Text mode
Touch ORIGINAL MODE on the Basic Screen.
The Special Original popup menu will be displayed.
press [AUTO RESET].
8-2
Making Copy Quality Closer to Originals (Text/Photo Enhance) (continued)
2.
Touch TEXT, PHOTO, or INCREASE CONTRAST, as required.
3.
4.
5.
Select additional copying features, as desired.
6.
Text/Photo
Enhance
Mixed
Original
• For details on positioning originals, see p. 3-2 to p. 3-6.
exceeds 50.
7.
Press [START].
When the finisher / inner / paper exit tray capacity is exceeded due
8-3
Folded
Original
Non-Standard
Size
8
Special
Original
Copying Mixed Size Originals (Mixed Original)
Use the Mixed original mode with the document feeder or with Store mode to copy
mixed size originals.
Each original in the mixed set will be copied to paper of the same size (APS mode) or to
paper of desired size with appropriate ratio automatically selected (AMS mode).
Specifications for Mixed Original
❒ Use RADF.
❒ Combination of original sizes to be mixed depends on the width of the RADF
original guides. See p. 10-9 for details.
❒ Incompatible Conditions: Using platen glass (unless Platen store mode is used), ESORT+Sort, E-SORT+Group, Folded Original, Non STD Size, Sheet/Cover
Insertion, Combination, Booklet, OHP Interleave, Image Insert, Dual Page, NonImage Area Erase, Repeat, Fold Erasure, AUTO Layout, Image Shift, Stamp
APS mode
Automatically
select the paper
of the same size
as that of the
original.
Mixed size originals
1.
AMS mode
Automatically select
magnification ratio
to copy onto the
same paper in size.
press [AUTO RESET].
2.
Touch Mixed Original.
3.
4.
APS is automatically selected on the Basic Screen.
To select AMS, touch the tray key on the Basic Screen to select the desired
paper size.
8-4
Copying Mixed Size Originals (Mixed Original) (continued)
5.
6.
Position mixed original(s) FACE UP in the document feeder.
• For details on positioning originals, see p. 3-3.
exceeds 50.
7.
Press [START].
Text/Photo
Enhance
Mixed
Original
Folded
Original
Non-Standard
Size
8
Special
Original
8-5
Copying Folded Originals (Folded Original)
Use the Folded original mode with the document feeder to copy Folded originals.
Otherwise, the size detection sensor of the RADF may function incorrectly.
This mode requires more scanning time to detect the original size.
Specifications for Folded Original
❒ Use RADF.
❒ Incompatible Conditions: Using platen glass, Mixed Original, Non STD Size, NonImage Area Erase, AUTO Layout
Folded original
1.
press [AUTO RESET].
2.
Touch Folded Original.
3.
4.
5.
6.
• See p. 3-4 for details on positioning originals.
exceeds 50.
8-6
Copying Folded Originals (Folded Original) (continued)
7.
Press [START].
Text/Photo
Enhance
Mixed
Original
Folded
Original
Non-Standard
Size
8
Special
Original
8-7
Copying Non-Standard Size Originals (Non-Standard Size)
Feeding special size originals through the RADF without selecting Non-standard size
mode may cause the copier to stop scanning and mistakenly sense that the size
detection sensor has malfunctioned or cause a paper misfeed.
Using Non-standard size mode, the copier will search and copy onto the standard size
copy paper that is closest to the original size.
Specifications for Non-Standard Size
❒ Use RADF. Platen glass is not available.
❒ Incompatible Conditions: APS, AMS, Mixed Original, Folded Original, Combination,
Booklet, Image Insert, Dual Page, Flip Side 2, Repeat, Frame/Fold Erasure, AUTO
Layout, Image Shift, Non-Image Area Erase, Stamp, Overlay
1.
press [AUTO RESET].
2.
Touch Non-standard size.
3.
4.
5.
6.
• See p. 3-2 for details on positioning originals.
exceeds 50.
7.
Press [START].
8-8
Application
Selection Screen
Sheet/Cover
Insertion
Section 9:
Chapter
Combination
Booklet
9
Applications
OHP
Interleave
Image Insert
How to Use Application Functions
To Display Application Selection Screen ................................................... 9-2
Inserting Sheets and Covers (Sheet/Cover Insertion) ............................... 9-3
Lay Out Several Pages onto One Sheet (Combination) .......................... 9-10
Making a Multiple Page Signature Booklet (Booklet) .............................. 9-13
Copying onto Transparent Films (OHP Interleave) ...................................... 9-16
Inserting Images into Printed Sets (Image Insert)................................... 9-18
Dividing an Image into Right and Left Pages (Dual Page) ............................... 9-21
Reverse the Second Side in 1-2 Mode (Flip Side 2)................................ 9-25
Erasing Outside of the Original (Non-Image Area Erase)............................ 9-27
Reversing Colour in Black and White Image (Reverse Image) .............................. 9-29
Repeating Selected Image Area (Repeat: Vert./Horiz. Mode) .......................... 9-31
Repeating Automatically or Selecting Repeating Times (Repeat: AUTO/
Repeat Mode)............................ 9-34
Eliminating Black Copy Marks Along Borders (Frame/Fold Erasure)............................ 9-37
Copying Image in the Centre of Copy Paper (AUTO Layout)............................ 9-40
Adjusting Position of Copy Image (Image Shift) ...................................... 9-42
Reducing Images to Create Binding Margin (Reduce&Shift)............................ 9-44
Printing Stamp, Page, Watermark onto Copies (Stamp).............................. 9-47
Overlaying an Image onto Each Page Copied in the Job (Overlay) ............................. 9-51
Dual Page
Flip Side 2
Non-Image
Area Erase
Reverse
Image
Repeat
Frame/Fold
Erasure
AUTO
Layout
9
Applications
Image Shift
Reduce &
Shift
Stamp
Overlay
To Display Application Selection Screen
Follow the procedure below to display the Application Selection Screen and select the
desired copying features.
1.
Touch APPLICATION on the Basic Screen.
The Application Selection Screen will be displayed on the touch panel.
• When a function key is touched, it becomes highlighted. If you touch a
function key, another screen or two will display to enable you to enter the
appropriate settings.
• If one function on the menu is incompatible with another, it will appear
dimmed.
• The APPLICATION key will be highlighted when the Basic Screen is
restored after application selections have been made.
To restore the original copying conditions, touch CANCEL.
To clear all Application settings, touch ALL CLEAR.
2.
Touch OK on the Application Selection Screen.
Selections will be completed and the Basic Screen will be restored.
With the Basic Screen displayed, you can press [START] to perform the
operation.
9-2
Inserting Sheets and Covers (Sheet/Cover Insertion)
Use Sheet/Cover Insertion in copy mode or blank mode to insert chapter sheets or
separator sheets into the finished set, as well as front and back covers.
Application
Selection Screen
Sheet/Cover
Insertion
Specifications for Sheet/Cover Insertion
❒ Use RADF.
❒ The same tray will be specified as the source of insertions and covers. If using thick
or other paper for front/back cover, select the Multi-sheet bypass tray as the cover
sheet tray source individually on the screen.
❒ AMS (Automatic Magnification Selection) is automatically selected. The paper size
in insertion tray and original size are detected, and the correct ratio will be
automatically selected.
❒ Max. insert sheets: 15 locations, from 1~999, including front and back covers
❒ Incompatible Conditions: APS, Punch, Group, E-SORT+Sort, E-SORT+Group,
Mixed Original, Chapter, Combination, Booklet, OHP Interleave, Image Insert, Dual
Page, Non-image Area Erase, Repeat, AUTO Layout, Stamp (Page, Numbering),
Overlay
Chapter
Combination
Booklet
OHP
Interleave
Image Insert
Dual Page
FRONT COVER COPIED
SURVEYOR’S
REPORT
9 10
78
56
34
12
4
23
FRONT COVER BLANK
9 10
78
56
SURVEYOR’S 1
REPORT
Originals
Copies
SURVEYOR’S
REPORT
SURVEYOR’S
REPORT
12
Originals
9
7 8 10
56
34
Copies
SURVEYOR’S
REPORT
SURVEYOR’S
REPORT
SURVEYOR’S
REPORT
34
12
56
Flip Side 2
9 10
78
Non-Image
Area Erase
Originals
Reverse
Image
Copies
3
12 4
56
SURVEYOR’S 1
REPORT
10
89
67
45
23
2
SURVEYOR’S 1
REPORT
Originals
34
56
Repeat
9 10
78
Frame/Fold
Erasure
AUTO
Layout
Copies
BLANK SHEET INSERTION
COPY SHEET INSERTION
9 10
78
56
34
12
10
89
67
45
23
BACK COVER BLANK
BACK COVER COPIED
9 10
78
56
34
12
SURVEYOR’S 1
REPORT
10
89
7
SURVEYOR’S
REPORT
9 10
78
56
34
12
SURVEYOR’S
REPORT
3
12
6
45
78
9
9 10
Applications
Originals
Copies
Combination samples:
FRONT & BACK COVERS COPIED,
AND COPY SHEET INSERTION
SURVEYOR’S 1
REPORT
1.
10
89
67
45
23
SURVEYOR’S
REPORT
1
7
4
10
Image Shift
Copies
Reduce &
Shift
FRONT & BACK COVERS BLANK,
AND BLANK SHEET INSERTION
89
56
23
Originals
SURVEYOR’S 1
REPORT
10
89
67
45
23
SURVEYOR’S
REPORT
3
12
6
45
78
9 10
Stamp
Overlay
Load insert/cover sheets into the desired tray, and load regular sheets
of the same size into copy paper tray source.
If different paper type is desired for covers, load them into the Multi-sheet bypass tray.
9-3
Inserting Sheets and Covers (Sheet/Cover Insertion) (continued)
If using thick or other paper for covers, load them into the Multi-sheet bypass
tray and touch BYPASS in step 4.
Be sure that the trays for copy paper, front/back covers, and insertions have
the same paper size loaded.
2.
press [AUTO RESET].
3.
Touch Sheet/Cover Insertion on the Application Selection Screen.
The Sheet/Cover Insertion Screen will be displayed.
4.
Select the cover and insertion sheet tray source.
Touch CHANGE TRAY to select the cover and insertion sheet tray source.
The same tray will be specified as the source of insertions and covers. If using thick or
other paper for covers, load them into the Multi-sheet bypass tray and touch BYPASS
individually on the screen.
If BYPASS is specified as the initial insertion sheet tray source in the Key
Operator setting, both cover and insertion sheet will be fed from BYPASS only.
9-4
5.
Application
Selection Screen
Select the desired cover mode.
Sheet/Cover
Insertion
Chapter
Combination
Booklet
Example: Touch FRONT COPY to insert a copied front cover.
If no insertion is desired, touch OK to return to the Application Selection Screen, then
proceed to step 8.
6.
OHP
Interleave
Image Insert
Select the desired insertion mode.
Dual Page
Flip Side 2
Non-Image
Area Erase
Reverse
Image
Example: Touch COPY INSERTION to insert copied sheets.
7.
Repeat
Enter the page number.
Frame/Fold
Erasure
AUTO
Layout
9
Applications
Image Shift
Use the control panel keypad to enter the page number of insertion location.
Touch SET after each entry to move to the next key.
To clear an incorrect entry, touch DELETE or press [C (CLEAR)]. The insertion
location will be deleted.
Reduce &
Shift
Stamp
See p. 9-6 for details on entering page numbers.
Overlay
Touch OK to complete the page setting and return to the Application Selection Screen.
8.
When all settings are completed, touch OK on the Application
Selection Screen to return to the Basic Screen.
9.
9-5
10. Position originals FACE UP in the document feeder.
• For details on positioning originals, see p. 3-2.
exceeds 50.
11. Press [START].
Fifteen keys are displayed on the screen to designate each insertion
location.
The first (upper left) key displays the Front Cover icon if selected. The Back
Cover icon appears, if selected, as the last (lower right) key.
Example: If p. 4 is entered in blank mode, a blank sheet will be inserted
between p. 4 and p. 5; in copy mode, a copied sheet is inserted at p. 4.
NOTES:
• Page numbers entered at random will be sorted automatically.
• Entering “0” or the same page number twice will be ignored on the
screen.
• When a page number entered is larger than the total original page count,
it will be ignored.
9-6
Positioning Title Pages on the Right Side (Chapter)
Chapter is used with RADF in 1-2 or 2-2 mode for the purpose of locating title pages on
the right side, rather than reverse side, of a duplex copy to improve the presentation of
double-sided copies.
To effectively locate the title page on the right, a blank sheet will be automatically
created on the reverse side of a sheet, if required.
Specifications for Chapter
Application
Selection Screen
Sheet/Cover
Insertion
Chapter
Combination
❒ Use RADF.
❒ Max. title pages: 15 sheets, from 1 ~ 999
❒ Incompatible Conditions: 1-1, 2-1, Group, Sheet/Cover Insertion, Combination,
OHP Interleave, Image Insert, Dual Page, Non-Image Area Erase, Repeat, AUTO
Layout, Overlay
Booklet
OHP
Interleave
2-sided originals
Title pages
Dual Page
Flip Side 2
5
34
1 2
6
6
4
8
7 8
2
3
5
7
Copies in Chapter mode
Title page
8
Image Insert
1-sided originals
4
6
Title pages
5
2
1
Non-Image
Area Erase
7
Reverse
Image
3
1
Repeat
Title page
Frame/Fold
Erasure
1.
AUTO
Layout
9
Applications
Image Shift
Reduce &
Shift
Stamp
Overlay
press [AUTO RESET].
9-7
Positioning Title Pages on the Right Side (Chapter) (continued)
2.
Touch Chapter on the Application Selection Screen.
The Chapter Page Setting Screen will be displayed.
3.
Use the control panel keypad to enter the page number of each title
page.
To clear an incorrect entry, touch DELETE. The entered number will be deleted.
• Entering “0” or the same page number twice will be ignored on the
screen.
• Chapter insertions occur in sequence even if original page numbers are
entered out of sequence.
• When a page number is larger than the total original page count, insertion
occurs as the last page of the document.
• Touch Booklet to specify this function directly from the Chapter Page
Setting Screen. The Booklet Mode Selection popup menu will be
displayed.
Touch the desired mode key, then touch OK to restore the Chapter Page
Setting Screen.
• To change the selection of paper tray for copying title pages, touch Copy
Insertion to use this function. The title pages will be copied using paper
from the insertion tray source. See p. 9-4.
9-8
Positioning Title Pages on the Right Side (Chapter) (continued)
4.
Application
Selection Screen
When all entries are made, touch OK.
The Application Selection Screen will be restored.
5.
Sheet/Cover
Insertion
Chapter
6.
Combination
7.
Booklet
OHP
Interleave
exceeds 50.
8.
Image Insert
Dual Page
Press [START].
Flip Side 2
Non-Image
Area Erase
Reverse
Image
Repeat
Frame/Fold
Erasure
AUTO
Layout
9
Applications
Image Shift
Reduce &
Shift
Stamp
Overlay
9-9
Lay Out Several Pages onto One Sheet (Combination)
Use this function to lay out and copy a fixed number (2, 4, or 8) of pages onto one sheet
of copy paper (2 in 1, 4 in 1, or 8 in 1).
Specifications for Combination
❒ Use RADF.
❒ AMS is automatically selected. (Normally the fixed size of Tray 1 will be selected.)
❒ Incompatible Conditions: APS, Mixed Original, Non-Standard Size, Sheet/Cover
Insertion, Chapter, Booklet, Image Insert, Dual Page, Flip Side 2, Non-Image Area
Erase, Repeat, Frame/Fold Erasure, AUTO Layout, Overlay
4 in 1 copying
Original
2 in 1 copying
1
1
8 in 1 copying
1 2 3 4
2
3
1.
2
4
5 6 7 8
press [AUTO RESET].
2.
Touch Combination on the Application Selection Screen.
The Combination Mode Selection Screen will be displayed.
9-10
Lay Out Several Pages onto One Sheet (Combination) (continued)
3.
Application
Selection Screen
Select the desired Combination mode.
Sheet/Cover
Insertion
Chapter
Combination
Booklet
Touch 2 in 1, 4 in 1 or 8 in 1, and select a key in the LAYOUT area, referring to the
illustration on the following page.
4.
OHP
Interleave
Image Insert
Touch OK.
5.
Dual Page
AMS is automatically selected, and tray 1 is selected. When selecting any other tray,
touch the desired tray key.
6.
Flip Side 2
Non-Image
Area Erase
Reverse
Image
7.
Repeat
Frame/Fold
Erasure
exceeds 50.
8.
AUTO
Layout
9
Press [START].
Applications
Image Shift
Reduce &
Shift
Stamp
Overlay
9-11
Lay Out Several Pages onto One Sheet (Combination) (continued)
Refer to the table below to select the desired Combination mode.
Horizontal order
Layout
Original
2 in 1
4 in 1
Vertical order
8 in 1
4 in 1
8 in 1
Portrait type
1
1
2
5 6 7 8
3
4
1
2
1
1
2
3
2
3
4
Landscape type
9-12
1
3
1 2 3 4
2
1 3 5 7
2 4 6 8
2
4
1
5
4
1
3
2
6
5
6
2
4
3
7
7
8
4
8
Making a Multiple Page Signature Booklet (Booklet)
Use the Booklet function to make a multiple page signature booklet copied on both
sides of the paper from any tray.
Original images are scanned into memory and automatically arranged in booklet format
in the correct order.
Application
Selection Screen
Sheet/Cover
Insertion
Chapter
Specifications for Booklet
❒ Use RADF.
❒ Original pages should be a multiple of 4 in 1-2 mode or a multiple of 2 in 2-2 mode;
otherwise blank pages are automatically inserted to the last.
❒ AMS is automatically selected. Select the desired paper size.
❒ Original Size: A4, A4R, or B5
❒ Incompatible Conditions: APS, 1-1, 2-1, Staple, Punch, Group, E-SORT+Sort, ESORT+Group, Mixed Original, Non-Standard Size, Sheet/Cover Insertion,
Combination, OHP Interleave, Flip Side 2, Non-Image Area Erase, Repeat, Fold
Erasure, AUTO Layout, Stamp (Page, Numbering), Overlay
Combination
Booklet
OHP
Interleave
Image Insert
Dual Page
Flip Side 2
..............
1-sided originals
1
3
2
48
47
4
Non-Image
Area Erase
Reverse
Image
..............
25
45
24
48 1
4
2
47
Booklet copying
46 3
26 23
Repeat
3
1
7
5
47
45
2-sided originals
Frame/Fold
Erasure
48
46
8
6
4
2
..............
AUTO
Layout
1.
9
Applications
Image Shift
Reduce &
Shift
Stamp
Overlay
press [AUTO RESET].
9-13
Making a Multiple Page Signature Booklet (Booklet) (continued)
2.
Touch Booklet on the Application Selection Screen.
The Booklet Mode Selection Screen will be displayed.
3.
Touch to highlight the desired Booklet mode key.
4.
Touch OK.
Select additional Applications, as desired.
5.
6.
Select the 1-2 or 2-2 copy mode and the desired paper size.
AMS is selected automatically.
To release AMS, select the desired magnification, then select paper size.
7.
8.
exceeds 50.
Original pages should be a multiple of 4 in 1-2 mode or a multiple of 2 in 2-2
mode; otherwise blank pages are automatically inserted to the last.
9-14
Making a Multiple Page Signature Booklet (Booklet) (continued)
9.
Application
Selection Screen
Press [START].
Sheet/Cover
Insertion
Chapter
Combination
Booklet
OHP
Interleave
Image Insert
Dual Page
Flip Side 2
Non-Image
Area Erase
Reverse
Image
Repeat
Frame/Fold
Erasure
AUTO
Layout
9
Applications
Image Shift
Reduce &
Shift
Stamp
Overlay
9-15
Copying onto Transparent Films (OHP Interleave)
Use the OHP Interleave function in 1-1 or 2-1 mode to copy onto overhead projection
transparent films, and output a blank or copied interleaf sheet with each copied
transparent film.
In the Blank sheet interleaving mode, a blank interleaf sheet is output with each
transparent film to keep the film material from sticking together.
In the Copy sheet interleaving mode, a copied interleaf sheet is output with each
transparent film to provide reference during a presentation, a version for photocopying,
and a set for filing or inserting into a binder.
Specifications for OHP Interleave
❒ Transparent film source: Multi-sheet bypass tray
❒ Print quantity: 1
❒ Finisher functions cannot be used. The Stack mode is used automatically, and
printed sheets will be delivered to TRAY 1 in the machine with FS-114, or to
secondary (sub) tray in the machine with FS-113.
❒ AMS is automatically selected.
❒ Incompatible Conditions: APS, 1-2, 2-2, Sort, Staple, Punch, Group, Fold,
Fold&Stitch, E-SORT+Sort, E-SORT+Group, Mixed Original, Sheet/Cover
Insertion, Chapter, Booklet, Image Insert, Repeat
Blank sheets
Transparent films
Original
1.
Blank Sheet Interleaving
Copied sheets
Transparent films
Copy Sheet Interleaving
Insert a sheet of transparent film into the Multi-sheet bypass tray.
• Do not load transparent films into any tray other than the bypass tray.
• Specify the Bypass paper type as OHP sheet. See p. 3-24.
2.
9-16
When interleaf sheet is needed, load copy paper in any other tray to
match the size of transparent films.
Copying onto Transparent Films (OHP Interleave) (continued)
3.
Application
Selection Screen
Sheet/Cover
Insertion
Chapter
Combination
Booklet
OHP
Interleave
Image Insert
press [AUTO RESET].
4.
Dual Page
Touch OHP Interleave on the Application Selection Screen.
Flip Side 2
Non-Image
Area Erase
Reverse
Image
Repeat
5.
Frame/Fold
Erasure
Select the desired OHP Interleave mode, then touch OK.
AUTO
Layout
9
Applications
Image Shift
6.
Reduce &
Shift
Stamp
• AMS is selected automatically.
To release AMS, select the desired magnification.
• Print quantity is already set to 1. You cannot enter any other quantity.
7.
For details on positioning originals, see p. 3-2 to p. 3-6.
8.
Press [START].
9-17
Overlay
Inserting Images into Printed Sets (Image Insert)
Use the Image insert mode to combine images scanned from the platen glass, such as
photos, paste-ups, newspaper articles, graphs, etc., with images scanned from the
document feeder. Then, output the combined images as a finished set.
The selected copy paper size is determined by the size of originals loaded in the
document feeder.
Specifications for Image Insert
❒ Use RADF and platen glass.
❒ Max. image insert: 15 locations, from p. 1 to p. 999
❒ Incompatible Conditions: Group, E-SORT+group, Mixed Original, Non-Standard
Size, Sheet/Cover Insertion, Chapter, Combination, OHP Interleave, Dual Page,
Non-image Area Erase, Repeat, AUTO Layout, Image Shift, Overlay
1-sided originals
placed on RADF
1
23
4
7
56
56
8
Insertion originals
on platen glass
2
34
7
7
2
2
3
4
6
8
6
8
2-sided originals
placed on RADF
1
78
5
5
4
3
1
1.
1
press [AUTO RESET].
9-18
Inserting Images into Printed Sets (Image Insert) (continued)
2.
Application
Selection Screen
Touch Image Insert on the Application Selection Screen.
Sheet/Cover
Insertion
Chapter
Combination
Booklet
OHP
Interleave
The Image Insertion Page Setting Screen will be displayed.
3.
Use the control panel keypad to enter the page number.
Image Insert
Dual Page
Flip Side 2
Non-Image
Area Erase
Reverse
Image
To clear an incorrect entry, touch DELETE. The entered page number will be deleted.
Repeat
Frame/Fold
Erasure
See p. 9-20 for detailed example.
Touch Booklet on the Image Insertion Page Setting Screen to use this
function.
On the Booklet Mode Selection popup menu, touch the desired Booklet
mode key, then touch OK to restore the Image Insertion Page Setting
Screen.
AUTO
Layout
9
Applications
Image Shift
Reduce &
Shift
Stamp
Overlay
4.
When all page number entries are made, touch OK.
5.
The Basic Screen will be restored. The STORE key appears highlighted to show that
the Store mode is automatically selected.
9-19
Inserting Images into Printed Sets (Image Insert) (continued)
6.
7.
If the number of originals exceeds 50, divide them into blocks not exceeding 50 sheets
and load them from the block with the first page.
8.
Press [START].
The originals positioned in the document feeder will be scanned into memory.
Repeat steps 7 and 8 for all originals.
9.
Scan the platen glass images.
Open the document feeder. Position an original FACE DOWN on the platen glass, then
close the document feeder.
PLACE AND SCAN THE ORIGINALS ACCORDING TO PAGINATION.
10. Press [START].
Repeat steps 9 and 10 for all originals.
• Memory overflow may occur during scanning. See p. 5-10 to p. 5-11.
• Should memory overflow occur frequently, it is recommended that you
contact your service representative to extend the memory capacity in
your machine.
11. Touch STORE to exit the Store mode.
12. Press [START].
The copier will start printing when ready for output.
For example, if insertion locations are [2/2/6], scanned platen images will be
inserted as follows:
The first scanned platen image will be inserted after page 2.
The second scanned platen image will be inserted directly after the first
scanned image insertion.
The third scanned platen image will be inserted after page 6.
NOTES:
• When a page number is larger than the total original count, a blank sheet
is inserted as the last page.
• Insertions occur in sequence, even if page numbers are entered out of
sequence.
• Entering the same page number twice will insert two sheets at that
location.
9-20
Dividing an Image into Right and Left Pages (Dual Page)
The Dual Page mode performs image division on the original image. Use this function
to copy an open book or a A3/B4 size sheet onto two A4/B5 sheets in 1-1 or 2-1 mode,
or onto the front and back sides of one A4/B5 sheet in 1-2 or 2-2 mode.
The following three modes can be selected from the Dual Page Screen.
• Facing Pages mode: Image division starts from the first scan.
• Front Cover + Facing Pages mode: Image division starts from the second scan, after
the first scan copies normally.
• Front/Back + Facing Pages mode: Image division starts from the third scan, after the
first and second scan copy normally.
Application
Selection Screen
Sheet/Cover
Insertion
Chapter
Combination
Booklet
OHP
Specifications for Dual Page
❒ Store mode is automatically selected.
❒ Original size: A3, B4, A4R, 8.5"x11"R, 11"x17"
Image Insert
NOTE:
Originals are not limited in size, however, carefully select an appropriate
magnification ratio and setting orientation when copying original size other
than the above.
❒ Paper size: A4, A4R (use Rotation), B5R (use Rotation)
❒ Incompatible Conditions: APS, Mixed Original, Folded Original, Non-Standard Size,
Sheet/Cover Insertion, Chapter, Combination, Image Insert, Flip Side 2, Repeat,
Fold Erasure, Image Shift, Stamp, Overlay
Dual Page
Flip Side 2
Non-Image
Area Erase
Reverse
Image
Set original
1-1 / 2-1 mode
Repeat
Frame/Fold
Erasure
AUTO
Layout
9
1-2 / 2-2 mode
Applications
Image Shift
Reduce &
Shift
Stamp
1.
Overlay
9-21
Dividing an Image into Right and Left Pages (Dual Page) (continued)
press [AUTO RESET].
2.
Touch Dual Page on the Application Selection Screen.
The Dual Page Screen will be displayed.
3.
Select the desired Dual Page mode.
Touch to highlight the desired mode key.
4.
Select the desired scanning order according to the original
pagination.
Touch Booklet on the Dual Page Screen to use this function.
On the Booklet Mode Selection popup menu, touch the desired Booklet
mode key, then touch OK to restore the Image Insertion Page Setting
Screen.
5.
Touch OK.
6.
APS and AMS are automatically released, and the STORE key appears highlighted to
show that the Store mode is automatically selected.
9-22
7.
Application
Selection Screen
Select the desired copy mode and magnification.
Sheet/Cover
Insertion
• When selecting Facing pages mode and scanning from the platen glass,
select 1-1 or 1-2 copy mode.
• APS and AMS are released and 1.00 magnification is selected automatically.
Change the magnification manually, if desired.
8.
Combination
Booklet
OHP
Interleave
9.
Chapter
When using platen glass to scan, position the first page FACE DOWN with document
feeder kept open.
When using document feeder, position original(s) FACE UP.
For details on scanning originals in Front cover + Facing pages and Front/Back +
Facing pages mode, see the description on the following page.
10. Press [START] to scan.
11. Repeat steps 9 and 10 for all originals.
Image Insert
Dual Page
Flip Side 2
Non-Image
Area Erase
Reverse
Image
When using platen glass, Non-Image Area Erase and AUTO Layout are
DO NOT CLOSE the document feeder or platen cover throughout the
scanning job.
13. Press [START].
Repeat
Frame/Fold
Erasure
AUTO
Layout
9
The copier will start printing when ready for output.
Applications
Image Shift
Reduce &
Shift
Stamp
Overlay
9-23
Scanning Original for Cover
Use platen glass for scanning original for cover.
1
2
3
4
Open the document feeder or platen cover.
Position original for front cover FACE DOWN on the platen glass.
Press [START] to start scanning.
When Front/Back + Facing pages is selected, scan original for back
cover according to the above steps 2 and 3.
5 Use platen glass or document feeder, as required, for scanning body text
originals.
To output the set in the same order as the originals, start scanning from
the first page.
6 Press [START] to start scanning.
7 Repeat steps 5 and 6 for subsequent originals.
“Front Cover + Facing pages”
SURVEYOR’S
REPORT
4
23
Scan from
first page
56
9 10
78
SURVEYOR’S 1
REPORT
Copies
“Front/Back + Facing pages”
4
23
SURVEYOR’S
REPORT
SURVEYOR’S
REPORT
Scan from
first page
56
9 10
78
SURVEYOR’S 1
REPORT
Copies
“Front Cover + Facing pages”
4
23
56
9 10
78
SURVEYOR’S 1
REPORT
Copies
“Front/Back + Facing pages”
4
23
SURVEYOR’S
REPORT
56
9 10
78
SURVEYOR’S 1
REPORT
Copies
NOTES:
• Memory overflow may occur during scanning. See p. 5-10 to p. 5-11.
• When using platen glass, Non-Image Area Erase and AUTO Layout are
DO NOT CLOSE the document feeder or platen cover throughout the
scanning job.
9-24
Reverse the Second Side in 1-2 Mode (Flip Side 2)
1-2 Flip Side 2 arranges the even pages of simplex originals upside down on the
reverse side of duplex copies.
Similarly, 2-1 Flip Side 2 rearranges the reverse sides of duplex originals which read
upside down to make normal simplex copies.
Application
Selection Screen
Sheet/Cover
Insertion
Chapter
Specifications for Flip Side 2
❒ 1-2 Flip Side 2 functions only when 1-2 copy mode is selected. 2-1 Flip Side 2
functions only when 2-1 copy mode is selected and RADF is used.
❒ Incompatible Conditions: Mixed Original, Non-Standard Size, Combination, Booklet,
Dual Page, Non-Image Area Erase, Repeat, AUTO Layout, Image Shift
1-2 Flip Side 2
Combination
Booklet
OHP
Interleave
2-1 Flip Side 2
Image Insert
3
1
1
3
Dual Page
2
3
2
2
1
Simplex originals
1
3
3
1
1
Flip Side 2
Right/Left bound duplex originals
Non-Image
Area Erase
3
2
Reverse
Image
2
3
Repeat
1
2
2
Right/Left bound duplex copies
1
Top/Bottom bound duplex originals
Frame/Fold
Erasure
AUTO
Layout
3
2
9
2
3
1
Top/Bottom bound duplex copies
1
2
Applications
3
Simplex copies
Image Shift
1.
Reduce &
Shift
Stamp
Overlay
press [AUTO RESET].
9-25
Reverse the Second Side in 1-2 Mode (Flip Side 2) (continued)
2.
Touch Flip Side 2 on the Application Selection Screen.
The Flip Side 2 Screen will be displayed.
3.
Touch the desired binding type key.
4.
Touch OK.
5.
6.
7.
8.
When selecting 2-1 Flip Side 2 mode, use RADF to scan originals.
exceeds 50.
9.
Press [START].
9-26
Erasing Outside of the Original (Non-Image Area Erase)
The Non-image area erase mode is used to copy non standard or special originals,
such as books, magazines, paste-ups, graphs, thick or thin materials, etc. from the
platen glass. The exposed glass area outside the borders of the original will not be
copied.
Application
Selection Screen
Sheet/Cover
Insertion
Chapter
Specifications for Non-Image Area Erase
❒ Use the platen glass only. Keep RADF or platen cover open throughout the
procedure.
❒ Incompatible Conditions: Using RADF, 2-2, 2-1, APS, Sort, Staple, Group, E-SORT
+Sort, E-SORT+Group, Mixed Original, Folded Original, Non-Standard Size, Sheet/
Cover Insertion, Chapter, Combination, Booklet, Image Insert, Flip Side 2, Reverse
Image, Image Shift, Stamp, Overlay
Combination
Booklet
OHP
Interleave
Image Insert
Dual Page
Flip Side 2
Non-Image
Area Erase
General copying
Non-Image Area Erase
Reverse
Image
Set original
Repeat
1.
Frame/Fold
Erasure
AUTO
Layout
9
Applications
Image Shift
Reduce &
Shift
press [AUTO RESET].
2.
Touch Non-Image Area Erase on the Application Selection Screen.
The incompatible function keys will be dimmed to show inactivity.
9-27
Stamp
Overlay
Erasing Outside of the Original (Non-Image Area Erase) (continued)
3.
4.
Select magnification and paper size, as desired.
• APS and AMS are automatically released.
• Copy mode is automatically set to 1-1. When selecting 1-2 mode, Platen
store mode will function automatically.
5.
6.
DO NOT CLOSE THE DOCUMENT FEEDER OR PLATEN COVER.
Original size should be larger than 10 mm x 10 mm.
7.
Press [START].
Oblique Erase and Rectangle Erase Modes
The Non-image area erase has two modes; Rectangle erase mode and
Oblique erase mode. The copier is initially set to Oblique erase mode.
If copy result is not satisfactory in the initial setting, ask Key Operator to
select the Rectangle erase mode, or to specify the original density level to
obtain the optimum copy effect. See p. 13-14.
Oblique erase mode
Rectangle erase mode
This function may perform incorrectly if the lighting is directly over the platen
glass. In this case, consult your service representative about an appropriate
place for installation.
9-28
Reversing Colour in Black and White Image (Reverse Image)
Use Reverse image to reverse the image from black-on-white to white-on-black, and
vice versa. This is convenient for copying white-on-black originals and reversing them
to fax.
Specifications for Reverse Image
Application
Selection Screen
Sheet/Cover
Insertion
Chapter
❒ Incompatible Conditions: Non-Image Area Erase, AUTO Layout
Combination
Booklet
OHP
Interleave
Image Insert
Dual Page
Original
Flip Side 2
Reverse Image copying
Non-Image
Area Erase
1.
Reverse
Image
Repeat
Frame/Fold
Erasure
AUTO
Layout
9
Applications
press [AUTO RESET].
2.
Touch Reverse Image on the Application Selection Screen.
Image Shift
Reduce &
Shift
Stamp
Overlay
3.
9-29
Reversing Colour in Black and White Image (Reverse Image) (continued)
4.
5.
6.
Press [START].
9-30
Repeating Selected Image Area (Repeat: Vert./Horiz. Mode)
Use this function to repeat the selected image area of 10 mm ~ 150 mm in both vertical
and horizontal widths measured from the rear left corner of the A3 original area
indicated on the left edge of the platen glass.
Vertical/Horizontal Width Setting Mode Specifications
Application
Selection Screen
Sheet/Cover
Insertion
Chapter
❒ Use the platen glass. (RADF cannot be used.)
❒ Incompatible Conditions: Using RADF, 2-2, 2-1, APS, AMS, Sort, Staple, Group, ESORT+Sort, E-SORT+Group, Mixed Original, Folded Original, Non-Standard Size,
Sheet/Cover Insertion, Chapter, Combination, Booklet, OHP Interleave, Image
Insert, Dual Page, Flip Side 2, Non-Image Area Erase, Frame/Fold Erasure, AUTO
Layout, Image Shift, Stamp, Overlay
Combination
Booklet
OHP
Interleave
Vertical/Horizontal Width Setting mode
Image Insert
Repeat copy
Horizontal width
Dual Page
Vertical
width
Flip Side 2
Non-Image
Area Erase
Reverse
Image
1.
Repeat
Frame/Fold
Erasure
AUTO
Layout
9
Applications
Image Shift
press [AUTO RESET].
2.
Reduce &
Shift
Stamp
Touch Repeat on the Application Selection Screen.
Overlay
The Repeat Mode Selection Screen will be displayed.
9-31
Repeating Selected Image Area (Repeat: Vert./Horiz. Mode) (continued)
3.
Touch Vert./horiz.
4.
Specify the vertical and horizontal widths of the scanning area.
Touch SET to display the Vertical/Horizontal Width Setting popup menu.
Use the up/down arrow key or numeric keypads to enter the width from 10 to 150 mm
in 1 mm increments.
Touch OK on the popup menu to restore the Repeat Mode Selection Screen.
5.
Touch OK.
6.
7.
Select the desired magnification and paper size.
• APS and AMS are automatically released, and 1.00 (100%) is selected
as a magnification ratio.
8.
9.
See the illustration on p. 9-31 for details.
9-32
Repeating Selected Image Area (Repeat: Vert./Horiz. Mode) (continued)
Application
Selection Screen
10. Press [START].
Sheet/Cover
Insertion
Chapter
Combination
Booklet
OHP
Interleave
Image Insert
Dual Page
Flip Side 2
Non-Image
Area Erase
Reverse
Image
Repeat
Frame/Fold
Erasure
AUTO
Layout
9
Applications
Image Shift
Reduce &
Shift
Stamp
Overlay
9-33
Repeating Automatically or Selecting Repeating Times
(Repeat: AUTO/ Repeat Mode)
Auto Detection mode will automatically set the equal repeat area to the size of the
original placed onto the platen glass by activating Non-image area erase.
Repeat mode will scan the image area specified by the selected paper size and mode
(RepeatX2, RepeatX4, or RepeatX8), then arrange the image by specified times in one
copy sheet.
Auto Detection/ Repeat Mode Specifications
❒ Auto Detection Mode: Use the platen glass. RADF cannot be used.
❒ Repeat Mode Magnification ratio: 1.00 (100 %) fixed
❒ Incompatible Conditions: Using RADF (Auto Detection mode only), 2-2 (Auto
Detection mode only), 2-1 (Auto Detection mode only), APS, AMS, Sort, Staple,
Group, E-SORT+Sort, E-SORT+Group, Mixed Original, Folded Original (available in
Repeat mode using RADF to scan), Non-Standard Size, Sheet/Cover Insertion,
Chapter, Combination, Booklet, OHP Interleave, Image Insert, Dual Page, Flip Side
2, Reverse Image (Auto Detection mode only), Frame/Fold Erasure, AUTO Layout,
Image Shift, Stamp, Overlay
Auto Detection mode
Copy
Repeat mode
Copy
(RepeatX2)
Copy
(RepeatX4)
Copy
(RepeatX8)
9-34
Repeating Automatically or Selecting Repeating Times (Repeat:
AUTO/ Repeat Mode) (continued)
1.
Application
Selection Screen
Sheet/Cover
Insertion
Chapter
Combination
Booklet
OHP
Interleave
press [AUTO RESET].
2.
Image Insert
Dual Page
Touch Repeat on the Application Selection Screen.
Flip Side 2
Non-Image
Area Erase
Reverse
Image
Repeat
The Repeat Mode Selection Screen will be displayed.
3.
Frame/Fold
Erasure
Touch AUTO, RepeatX2, RepeatX4, or RepeatX8, as desired.
AUTO
Layout
9
Applications
Image Shift
Reduce &
Shift
Touch OK to return to the Repeat Mode Selection Screen.
4.
Stamp
Touch OK.
Overlay
Non-Image Area Erase is automatically selected on the Application
Selection Screen when AUTO mode is selected.
5.
9-35
Repeating Automatically or Selecting Repeating Times (Repeat:
AUTO/ Repeat Mode) (continued)
6.
Select the desired magnification and paper size.
• When RepeatX2, RepeatX4, or RepeatX8 is selected, the scanning area
will be a portion of the selected paper size equally divided according to
the selected mode.
In this case, magnification ratio will be fixed to 1.00 (100%).
7.
8.
Position original.
For AUTO mode original, open the document feeder, then position the original FACE
DOWN on the platen glass.
For RepeatX2, RepeatX4 or RepeatX8 mode original, RADF is also available.
See the illustration on p. 9-34 for details.
When AUTO mode is selected, Non-Image Area Erase functions
automatically.
DO NOT close the document feeder or platen cover.
9.
Press [START].
The AUTO mode may not operate properly if the lighting in the work place is
directly over the platen glass. In this case, consult your ser vice
representative about an appropriate place for installation.
9-36
Eliminating Black Copy Marks Along Borders (Frame/Fold Erasure)
Use Frame/Fold Erasure to eliminate black copy marks along borders to clean up and
improve the presentation of the copy.
Use Top/Bottom erasure mode to erase the black copy marks at the top and/or bottom
of the copy image.
Application
Selection Screen
Sheet/Cover
Insertion
Chapter
Specifications for Frame/Fold Erasure
❒ Incompatible with Frame Erasure and Top/Bottom Erasure: Non-Standard Size,
Combination, Repeat
❒ Incompatible with Fold Erasure: Mixed Original, Non-Standard Size, Combination,
Booklet, Dual Page, Repeat
Combination
Booklet
OHP
Interleave
Top
erasure
Image Insert
Dual Page
Set original
Frame
erasure
Fold
erasure
Frame
erasure
Flip Side 2
Bottom
erasure
Non-Image
Area Erase
Reverse
Image
Repeat
General copying
1.
Frame Erasure
copying
Fold Erasure
copying
Frame/Fold Erasure
copying
Frame/Fold
Erasure
AUTO
Layout
9
Applications
Image Shift
Reduce &
Shift
Stamp
press [AUTO RESET].
9-37
Overlay
Eliminating Black Copy Marks Along Borders (Frame/Fold Erasure) (continued)
2.
Touch Frame/Fold Erasure on the Application Selection Screen.
The Frame/Fold Erasure Selection Screen will be displayed.
3.
Select the desired erasure mode, then specify the erasure amount.
Touch Frame Erasure, Fold Erasure, Top Erasure, or Bottom Erasure to highlight it.
To specify the erasure amount, touch Setting in the selected erasure mode area to
display the popup menu, then use arrow keys or the numeric keypads to specify the
desired erasure amount, from 1 ~ 15 mm (Frame erasure) / 1 ~ 30 mm (Fold erasure) /
1 ~ 100 mm (Top/Bottom erasure) in 1 mm increments.
Touch OK on the popup menu to restore the Frame/Fold Erasure Selection Screen.
Frame erasure, Fold erasure and Top/Bottom erasure can be selected in combination.
4.
Touch OK.
5.
6.
9-38
Eliminating Black Copy Marks Along Borders (Frame/Fold Erasure) (continued)
7.
Application
Selection Screen
Sheet/Cover
Insertion
Chapter
Combination
When closing the document feeder or platen cover on a thick original (e.g.
open book), do not press it down too hard. Keep the document feeder or
platen cover open, if required.
8.
Booklet
OHP
Interleave
Press [START].
Image Insert
Dual Page
Flip Side 2
Non-Image
Area Erase
Reverse
Image
Repeat
Frame/Fold
Erasure
AUTO
Layout
9
Applications
Image Shift
Reduce &
Shift
Stamp
Overlay
9-39
Copying Image in the Centre of Copy Paper (AUTO Layout)
Use this function to detect the image area of the original and centre the whole image on
the copy paper making it easy to copy small pieces of paper.
Specifications for AUTO Layout
❒ Use platen glass. RADF cannot be used.
❒ Non-Image Area Erase is automatically selected (can be released manually).
❒ Incompatible Conditions: Using RADF, 2-2, 2-1, APS, Sort, Staple, Group, E-SORT
+Sort, E-SORT+Group, Mixed Original, Folded Original, Non-Standard Size, Sheet/
Cover Insertion, Chapter, Combination, Booklet, Image Insert, Flip Side 2, Reverse
Image, Repeat, Image Shift, Stamp, Overlay
Auto Layout copying
Set original
1.
press [AUTO RESET].
2.
Touch AUTO Layout on the Application Selection Screen.
9-40
Copying Image in the Centre of Copy Paper (AUTO Layout) (continued)
Application
Selection Screen
• Non-Image Area Erase will be selected automatically.
• When using the Dual Page with this function, the original smaller than the
selected paper size will be printed in the centre of the copy paper without
image division performed.
3.
Chapter
Combination
4.
Sheet/Cover
Insertion
Booklet
Select the desired magnification and paper size on the Basic Screen.
OHP
Interleave
5.
Dual Page
Flip Side 2
Non-Image
Area Erase
6.
Image Insert
Reverse
Image
Repeat
Frame/Fold
Erasure
DO NOT close the RADF or platen cover when Non-Image Area Erase is
selected.
Placing original obliquely on the platen glass may cause black copy marks.
7.
Press [START].
AUTO
Layout
9
Applications
Image Shift
Reduce &
Shift
Stamp
The AUTO layout function may not operate properly if the lighting is directly
over the platen glass. In this case, consult your service representative about
an appropriate place for installation.
9-41
Overlay
Adjusting Position of Copy Image (Image Shift)
Use Image Shift to adjust the position of copy images, e.g. for the purpose of creating a
new binding margin on originals to make it easier for filing purposes.
If image loss is likely, select the Reduce & Shift mode instead of regular Image shift.
See p. 9-44.
Specifications for Image Shift
❒ Shift amount: -250 to +250 mm in 1 mm increments
❒ Incompatible Conditions: APS, Mixed Original, Non-Standard Size, Booklet, Image
Insert, Dual Page, Flip Side 2, Repeat, AUTO Layout, Non-Image Area Erase,
Stamp, Overlay
Shift
Original
Copy
1-1
2
4
2-1
4
4
3
4
3
2
2
1
2
1
1
2-2
3
5
6
3
2
2
1
1.
5
4
4
2
1
3
2
4
7
7
4
3
6
1
8
1-2
1
8
1
3
3
press [AUTO RESET].
9-42
Adjusting Position of Copy Image (Image Shift) (continued)
2.
Application
Selection Screen
Touch Image Shift on the Application Selection Screen.
Sheet/Cover
Insertion
Chapter
Combination
Booklet
OHP
Interleave
The Image Shift Setting Screen will be displayed.
3.
Touch Image Shift, then specify the shift amount.
Image Insert
Dual Page
Flip Side 2
Non-Image
Area Erase
Reverse
Image
Touch SET to display the popup menu, then use the up/down arrow key or the numeric
keypads to enter the desired shift amount, from -250 to +250 mm in 1 mm increments.
Touch OK on the popup menu to restore the Image Shift Setting Screen.
4.
Touch OK.
5.
9
Applications
7.
Frame/Fold
Erasure
AUTO
Layout
6.
Repeat
Image Shift
Reduce &
Shift
Stamp
8.
Overlay
Press [START].
9-43
Reducing Images to Create Binding Margin (Reduce&Shift)
Use Reduce & Shift instead of regular Image Shift to prevent image loss when creating
a binding margin.
Specifications for Reduce & Shift
❒ AMS is automatically selected and cannot be released.
❒ Shift amount: -250 to +250 mm in 1 mm increments
❒ Incompatible Conditions: APS, Mixed Original, Non-Standard Size, Image Insert,
Dual Page, Special Original Flip Side 2, Repeat, AUTO Layout, Non-Image Area
Erase, Stamp, Overlay
Shift
Reduce
Original
Copy
Reduce
1-1
2
4
2-1
4
4
3
4
3
2
2
1
2
1
1
2-2
3
5
6
2
2
1
1.
5
4
4
3
2
1
3
2
4
7
7
4
3
6
1
8
1-2
1
8
1
3
3
press [AUTO RESET].
9-44
Reducing Images to Create Binding Margin (Reduce&Shift) (continued)
2.
Application
Selection Screen
Touch Image Shift on the Application Selection Screen.
Sheet/Cover
Insertion
Chapter
Combination
Booklet
OHP
Interleave
The Image Shift Setting Screen will be displayed.
3.
Touch Reduce & Shift, then specify the shift amount.
Image Insert
Dual Page
Flip Side 2
Non-Image
Area Erase
Reverse
Image
Touch SET to display the popup menu, then use the up/down arrow key or the numeric
keypads to enter the desired shift amount, from -250 to +250 mm in 1 mm increments.
Repeat
Frame/Fold
Erasure
AUTO
Layout
9
Applications
Image Shift
Touch OK on the popup menu to restore the Image Shift Setting Screen.
Reduce &
Shift
The AMS will automatically determine the magnification ratio according to
the shift amount specified. The shift amount and magnification ratio
determined will be automatically applied to both the front and back pages.
4.
Touch OK.
Overlay
5.
6.
Stamp
9-45
Reducing Images to Create Binding Margin (Reduce&Shift) (continued)
7.
8.
Press [START].
9-46
Printing Stamp, Page, Watermark onto Copies (Stamp)
This function allows you to print onto output copies the desired type of stamp, date/
time, page number and numbering at the location designated on the screen, and to
print the desired letter type obliquely in the centre of the page (WATERMARK).
The four stamp types and watermark provided on the Stamp Menu Screen can be used
individually or in multiple combinations.
Specification for STAMP
Application
Selection Screen
Sheet/Cover
Insertion
Chapter
Combination
❒ Incompatible Conditions: Group (with NUMBERING), E-SORT+Group (with
NUMBERING), Mixed Original, Non-Standard Size, Dual Page, Reverse Image,
Repeat, AUTO Layout, Image Shift, Non-Image Area Erase, Overlay
Booklet
OHP
Interleave
Image Insert
STAMP
L-Top
C-Top
R-Top
Dual Page
A
2003.11.05 AM10:30
Flip Side 2
DATE/TIME
Non-Image
Area Erase
Reverse
Image
2/5
Z
PAGE
[1/1]
L-Bottom
NUMBERING
1.
C-Bottom
R-Bottom
Repeat
Frame/Fold
Erasure
WATERMARK
Printing positions
AUTO
Layout
9
Applications
Image Shift
Reduce &
Shift
Stamp
Overlay
press [AUTO RESET].
9-47
Printing Stamp, Page, Watermark onto Copies (Stamp) (continued)
2.
Touch STAMP/OVERLAY on the Application Selection Screen.
The Stamp Menu Screen will be displayed.
3.
Touch ORIGI. DIRECT.
The Original Direction popup menu will be displayed.
Touch the key to match the originals to be copied, then touch OK to return to the
Stamp Menu Screen.
4.
Touch to select the desired key.
The subsequent screen will be displayed to allow you to specify the selected stamp
type.
5.
When selecting WATERMARK: Specify the watermark type and pages
to print on.
Touch to highlight the desired watermark key on the screen.
Touch Only first page to print the selected watermark on the first page only.
9-48
Application
Selection Screen
When selecting STAMP: Specify the stamp type, printing position,
and pages to print on.
Sheet/Cover
Insertion
Chapter
Combination
Booklet
OHP
Interleave
Touch to highlight the desired stamp type key on the screen.
Touch the desired position key to select the stamp position.
Touch Only first page to print the selected stamp on the first page only.
Image Insert
Dual Page
When selecting DATE/TIME: Specify the date/time type, printing
position, and pages to print on.
Flip Side 2
Non-Image
Area Erase
Reverse
Image
Repeat
Frame/Fold
Erasure
Touch to highlight the desired date and time keys on the screen.
AUTO
Layout
When selecting PAGE: Specify the PAGE type and printing position.
9
Applications
Image Shift
Reduce &
Shift
Stamp
Touch to highlight the desired page type key on the screen.
Overlay
Service can set the machine to white out the print area of the page number,
so that the page number is readable when it overlaps the copy image.
Contact your service representative, if desired.
9-49
When selecting NUMBERING: Specify the numbering type, printing
position, and pages to print on.
Touch to highlight the desired numbering type key on the screen.
Service can set the machine to white out the print area of the number, so
that the number is readable when it overlaps the copy image. Contact your
service representative, if desired.
6.
Touch OK.
The Stamp Menu Screen will be restored.
Touch to select another stamp function key to use in combination, if desired.
7.
Touch OK on the Stamp Menu Screen.
8.
9.
10. Position original(s) FACE UP in the document feeder or FACE DOWN
11. Press [START].
9-50
Overlaying an Image onto Each Page Copied in the Job (Overlay)
Use this function to scan an image, then overlay the image onto each page copied in
the job.
Application
Selection Screen
Sheet/Cover
Insertion
Specification for Overlay
❒ Store mode is automatically selected.
❒ Incompatible Conditions: APS, AMS, E-SORT+Sort, E-SORT+Group, Mixed
Original, Sheet/Cover Insertion, Combination, Booklet, Image Insert, Dual Page,
Non-Image Area Erase, Repeat, AUTO Layout, Image Shift, Stamp
Chapter
Combination
Booklet
1st scanned original
Originals scanned
2nd and later
ABCD
Copies in Overlay mode
OHP
Interleave
ABCD
ABCD
ABCD
Image Insert
Dual Page
Flip Side 2
Non-Image
Area Erase
1.
Reverse
Image
Repeat
Frame/Fold
Erasure
AUTO
Layout
9
Applications
press [AUTO RESET].
2.
Image Shift
Reduce &
Shift
Touch STAMP/OVERLAY on the Application Selection Screen.
Stamp
Overlay
The Stamp Menu Screen will be displayed.
9-51
Overlaying an Image onto Each Page Copied in the Job (Overlay) (continued)
3.
Touch Overlay.
4.
Touch OK on the Stamp/Overlay Selection Screen.
5.
The Basic Screen will be restored. The STORE key appears highlighted to show that
the Store mode is automatically selected.
6.
7.
Select the desired paper size and magnification on the Basic Screen.
8.
Position the overlaying original.
Position the original FACE UP in the document feeder or FACE DOWN on the platen
glass.
9.
Press [START].
The original image will be scanned into memory.
10. Position the original(s) to be overlaid.
Position the original FACE UP in the document feeder or FACE DOWN on the platen
glass.
11. Press [START] to scan.
12. Repeat steps 10 and 11 for all originals.
14. Press [START] to print.
9-52
Section 10:
10
Paper and Original
Information
Paper Information .................................................................................... 10-2
Original Information ................................................................................. 10-8
Paper
Information
Original
Information
10
Paper &
Original Info
Paper Information
This machine is equipped with the following trays for loading copy paper.
• Tray 1 and 2 (Main body trays)
• Tray 3 (DB-211/DB-411 Drawer Base Unit)
• Tray 4 (DB-211 Drawer Base Unit)
• LCT (LT-203)
• Multi-sheet bypass tray
Also, the following equipment is provided for conveying/delivering copies.
• ADU (Automatic Duplex Unit)
• Finisher (FS-113/FS-114)
• Punch kit (PK-114)
• Saddle kit (SK-114)
• Inner tray (IT-101)
• Exit tray (Standard / ET-101) (for the machine without Finisher)
Refer to the following information on paper capacity for each.
Paper Weight
Paper Trays
Tray 1 and 2 (Main body trays)
Tray 3 (DB-211/411)
Tray 4 (DB-211)
LCT (LT-203)
Multi-sheet bypass tray
Weight
60 ~ 105 g/m2
50 ~ 130 g/m2
50 ~ 59 g/m2 when specified as Thin paper
106 ~ 130 g/m2 when specified as Thick paper 1
* Specify the paper type as Thick paper 2 when using
paper of poor fixability, irrespective of the paper weight.
Special (transparency film, labels, hole punch)
Equipment
Weight
g/m2
ADU
60 ~ 105
Finisher (FS-113)
50 ~ 130 g/m2
60 ~ 90 g/m2 in Staple mode
Finisher (FS-114)
Branch kit (BK-114)
50 ~ 130 g/m2
60 ~ 90 g/m2 in Sort, Group, or Staple mode
Finisher (FS-114)
with Punch kit (PK-114)
50 ~ 130 g/m2
Finisher (FS-114)
with Saddle kit (SK-114)
60 ~ 90 g/m2
Inner tray (IT-101)
50 ~ 130 g/m2
Exit tray (Standard / ET-101)
See p. 13-28 for Paper Type setting of each tray.
10-2
Paper Information (continued)
Tray/ Exit Tray Capacity
Paper Trays
Capacity
Tray 1 and 2 (Main body tray)
500 sheets (80 g/m2)
Tray 3 and 4 (DB-211)
500 sheets (80 g/m2)
Tray 3 (DB-411)
1,500 sheets (80 g/m2)
LCT (LT-203)
2,000 sheets (80 g/m2)
50 sheets (80 g/m2)
1 sheet each for special stock
Equipment
Capacity
ADU
Unlimited
Finisher (FS-113)
Secondary (Sub) tray:
250 sheets max. (or 36 mm max.) (80 g/m2)
20 sheets max. for thick paper and transparent film
Primary (Main) tray:
1,500 sheets max. (or 187.5 mm max.):
A3, B4, F4
3,000 sheets max. (or 375 mm max.):
A4, A4R, B5, A5R
See the table below for paper capacity in Staple mode.
Finisher (FS-114)
See the tables on p. 10-4 to p. 10-5.
Inner tray (IT-101)
50 sheets max. for Exit tray 1
100 sheets max. for Exit tray 2
100 sheets max.
Paper
Information
Tray Capacity for FS-113 Finisher in Staple mode
No. of copies
Tray capacity (set)
Tray capacity (sheet)
2 sheets
3 -5 sheets
6 - 10 sheets
11 - 20 sheets
21 - 30 sheets
31 - 40 sheets
41 - 50 sheets
100 sets
80 sets
60 sets
40 sets
60 sets
60 sets
60 sets
200 sheets
400 sheets
600 sheets
800 sheets
1,800 sheets
2,400 sheets
3,000 sheets
Original
Information
10
Paper &
Original Info
10-3
Tray Capacity for FS-114 Finisher
FS-114 Finisher only: 2 exit trays
Paper size/Paper type
Exit tray/Output mode
Stack
Exit tray 1
Sort/Group
Staple
Stack
Exit tray 2
Sort/Group
Staple
A5R
A4, B5
A3, B4
200 sheets
_
200 sheets
200 sheets
200 sheets
200 sheets
_
1000 sheets
_
_
200 sheets/20 sets 200 sheets/20 sets
1000 sheets
500 sheets
1000 sheets
500 sheets
Thick/Thin
paper,
Transparency
20 sheets
_
_
20 sheets
_
_
FS-114 Finisher with BK-114 Branch Kit: 3 exit trays
Stack
Exit tray 1
Sort/Group
Staple
Stack
Exit tray 2
Sort/Group
Staple
Stack
Exit tray 3
Sort/Group
Staple
A5R
A4, B5
A3, B4
200 sheets
_
200 sheets
200 sheets
200 sheets
200 sheets
_
200 sheets/20 sets 200 sheets/20 sets 200 sheets/20 sets
_
_
500 sheets
_
_
500 sheets
250 sheets
500 sheets
250 sheets
Thick/Thin
paper,
Transparency
20 sheets
_
_
20 sheets
_
_
20 sheets
_
_
FS-114 Finisher with SK-114 Saddle Kit: Saddle tray + 2 exit trays
Saddle tray Fold/Fold&Stitch
Stack
Exit tray 1
Sort/Group
Staple
Stack
Exit tray 2
Sort/Group
Staple
10-4
A5R
_
200 sheets
_
_
500 sheets
_
_
A4, B5
A3, B4
200 sheets
200 sheets
200 sheets
200 sheets
500 sheets
250 sheets
500 sheets
250 sheets
Thick/Thin
paper,
Transparency
_
20 sheets
_
_
20 sheets
_
_
FS-114 Finisher with SK-114 Saddle Kit and BK-114 Branch Kit: Saddle tray + 3 exit trays
Saddle tray Fold/Fold&Stitch
Stack
Exit tray 1
Sort/Group
Staple
Stack
Exit tray 2
Exit tray 3
Sort/Group
A5R
_
200 sheets
_
_
500 sheets
_
Staple
_
Stack
200 sheets
_
Sort/Group
Staple
_
A4, B5
A3, B4
200 sheets
200 sheets
200 sheets
200 sheets
500 sheets
250 sheets
500 sheets
250 sheets
200 sheets
100 sheets
200 sheets
100 sheets
Thick/Thin
paper,
Transparency
_
20 sheets
_
_
20 sheets
_
_
20 sheets
_
_
Paper
Information
Original
Information
10
Paper &
Original Info
10-5
Paper Size
Paper Trays
Available Sizes
Tray 1 (Main body tray)
B4, F4, A4, A4R, B5, A5R, 8.5”x14”, 8.5”x11”,
8.5”x11”R, 5.5”x8.5”R
Tray 2 (Main body tray)
A3, B4, F4, A4, A4R, B5, A5R, 11”x17”, 8.5”x11”,
8.5”x11”R
Tray 3 (DB-211)
A3, B4, F4, A4, A4R, B5, A5R, 11”x17”, 8.5”x11”,
8.5”x11”R
Tray 3 (DB-411)
A4, A4R, B5, B5R, 8.5”x11”, 8.5”x11”R
Tray 4 (DB-211)
A3, B4, F4, A4, A4R, B5, A5R, 11”x17”, 8.5”x11”,
8.5”x11”R
LCT (LT-203)
A4 fixed
A3, B4, F4, A4, A4R, B5, B5R, A5R, B6R, 8.5”x11”
Equipment
ADU
Available Sizes
A3, B4, F4, A4, A4R, B5, B5R, A5R*, 11”x17”, 8.5”x14”,
8.5”x11”, 8.5”x11”R, 5.5”x8.5”*
* Short edge feeding only
Finisher (FS-113)
Secondary (Sub) tray: A3, B4, F4, A4, A4R, B5, B5R,
A5R, 11”x17”, 8.5”x14”, 8.5”x11”, 8.5”x11”R, 5.5”x8.5”
Primary (Main) tray: A3, B4, A4, A4R, B5, B5R
Finisher (FS-114) only / with
Branch kit (BK-114)
A3, B4, F4, A4, A4R, B5, B5R, A5R, 11”x17”, 8.5”x14”,
8.5”x11”, 8.5”x11”R, 5.5”x8.5”
Finisher (FS-114)
with Saddle kit (SK-114)
Saddle tray: A3, B4, A4R, B5R
Tray 1, 2, 3: A3, B4, F4, A4, A4R, B5, B5R, A5R,
11”x17”, 8.5”x14”, 8.5”x11”, 8.5”x11”R, 5.5”x8.5”
Inner tray (IT-101)
A3, B4, F4, A4, A4R, B5, B5R, A5R, 11”x17”, 8.5”x14”,
8.5”x11”, 8.5”x11”R, 5.5”x8.5”
10-6
Special Paper in Multi-Sheet Bypass Tray
Multi-sheet bypass tray accepts the following special paper types that cannot be loaded
in the main body trays.
Transparent film, labels, hole punched, paper of poor fixability
Do not use paper with any staples, or paper that conducts
electricity (silver, carbon, etc.), otherwise an accident may occur as
a result of fire.
To avoid machine trouble, do not use heat-sensitive paper, coloured OHP
film, or paper specifically designed for ink-jet printers, such as photo-paper.
To Store Copy Paper
• Store paper in a cool, dry area. Using damp copy paper may cause a paper misfeed.
Keep partially used packages tightly wrapped during storage.
• Do not place paper packages vertically to store.
Paper curl due to the vertical storage may cause a paper misfeed.
Paper
Information
Original
Information
10
Paper &
Original Info
10-7
Original Information
Use the platen glass or document feeder to position originals to copy.
Platen Glass Originals
Use the platen glass when originals are not suitable for use with the document feeder,
e.g., when size is incompatible, or when originals are folded, stapled, torn, or in
generally poor condition.
See each description in this guide for copy conditions which cannot use the
document feeder to scan.
Unsuitable RADF Originals
1
2
3
Paste-ups or
cut-outs
Curled, creased or
folded originals
6
5
4
Glossy or transparent
originals, OHP film,
art paper, cellophane
Books
Doubled, punched or
stapled originals
Thin or thick originals
Platen Glass Original Specifications
❒ Max. original size: A3, sheet or book
❒ Max. book weight/thickness: 6.8 kg / 30 mm
❒ Original placement: Face down on left depth side of glass
Do not place too heavy originals, or do not press strongly when
thick original is placed and is under pressure of RADF; otherwise
the glass may be broken and you may be injured.
10-8
Original Information (continued)
RADF Originals
Following three modes are provided when using the document feeder (RADF) to scan
originals.
• Normal mode
• Mixed Original mode
• Folded Original mode
Specifications for each mode are described as follows.
Normal mode
❒ Detectable original size: A3, B4, F4, A4, A4R, B5, B5R, A5, A5R, 11”x17”, 8.5”x11”
❒ Original weight:
50 ~ 130 g/m2
❒ Max. feeder capacity: 50 sheets (80 g/m2 paper)
❒ Curling tolerance:
10 mm or less
❒ Original placement:
Face up, orientation same as copy paper
Mixed Original mode
Use Mixed Original mode to copy mixed size originals. See p. 8-4 to p. 8-5 for details.
❒ Original size:
❒
❒
❒
❒
Original weight:
Max. feeder capacity:
Curling tolerance:
Original placement:
Three types of size combination are determined by the
RADF guide width.
A3, B4, A4, A4R, B5, and A5 mixed
B4, A4R, B5, B5R, and A5 mixed
A4R, B5R, and A5 mixed
50 ~ 130 g/m2
50 sheets (80 g/m2 paper)
10 mm or less
Face up (see p. 3-3 for details.)
Paper
Information
Original
Information
See below for the guide width of each combination.
Guide
width
A4
A3
Guide
width
B5
B4
Guide
width
10
Paper &
Original Info
A5 A4
Folded Original mode
Use Folded Original mode to scan folded originals without using the size detection
sensor of the RADF. See p. 8-6 to p. 8-7 for details.
❒
❒
❒
❒
❒
Detectable original size: A3, B4, F4, A4, A4R, B5, B5R, A5, A5R, 11”x17”, 8.5”x11”
Original weight:
50 ~ 130 g/m2 (no special stock)
Max. feeder capacity: 50 sheets (20 g/m2 paper)
Curling tolerance:
10 mm or less
Original placement:
Face up; orientation same as copy paper
10-9
Section 11:
11
Supplies
How to Add Toner, Replace Staple
Cartridge and Empty Waste Basket
Adding Toner ........................................................................................... 11-2
Inserting a New Staple Cartridge into FS-113 Finisher ............................... 11-6
Empty Waste Basket of FS-113 Finisher............................................... 11-10
Inserting a New Staple Cartridge into FS-114 Finisher ............................. 11-12
Inserting a New Staple Cartridge into SK-114 Saddle Kit.......................... 11-16
Empty Waste Basket of PK-114 Punch Kit ............................................ 11-20
Add Toner
Add Staple
(FS-113)
Empty Waste
Basket (FS-113)
Add Staple
(FS-114)
Add Staple
(SK-114)
Empty Waste
Basket (PK-114)
11
Supplies
Adding Toner
When toner supply is low, the message “Please add toner” and the icon (
display on the touch screen.
)
Use the same number toner bottle as written on the label on the upper left
side of the toner bottle cover. Otherwise, machine trouble may occur.
Toner bottle No. label
Add toner according to the procedure as follows.
1.
Loosen toner by tapping both top and bottom of the new toner bottle
on a solid surface at least five times, then shake the bottle at least five
times.
5~6cm
11-2
5~6cm
Adding Toner (continued)
2.
Open the machine front door, then unlock and open the toner bottle
cover.
1
3
2
3.
Withdraw the toner bottle, then turn it clockwise to position the “Up
arrow” mark at the top.
2
1
Add Toner
4.
Fully withdraw the toner bottle straight toward the front to remove the
bottle.
Add Staple
(FS-113)
Empty Waste
Basket (FS-113)
Add Staple
(FS-114)
Add Staple
(SK-114)
Empty Waste
Basket (PK-114)
11
Supplies
11-3
5.
Remove the cap of the new toner bottle.
1
2
6.
Fully insert the new toner bottle until it locks into place, positioning
the “Up arrow” mark at the top.
Be sure the “Up arrow” mark on the toner bottle is shown on the top;
otherwise the toner bottle cannot be set properly.
7.
Close and lock the toner bottle cover, then close the machine front
door.
2
1
The toner bottle cover cannot be locked if the toner bottle is not set in place.
11-4
Keep the toner bottle away from children. The toner is non-toxic;
however if you inhale or contact with eyes by accident, flush with
water and seek medical advice.
Do not throw the empty toner bottle into a fire. If it is thrown into a
fire, the toner may ignite and cause a dangerous situation.
Add Toner
Add Staple
(FS-113)
Empty Waste
Basket (FS-113)
Add Staple
(FS-114)
Add Staple
(SK-114)
Empty Waste
Basket (PK-114)
11
Supplies
11-5
Inserting a New Staple Cartridge into FS-113 Finisher
When the staple cartridge of the FS-113 Finisher is empty, the Basic Screen displays
the following message in the message area.
Follow the procedure below to replace the staple cartridge.
Use only the staples supplied by us. To purchase, please contact your
1.
Holding the finisher handle on the top, slide the Finisher to the left
until it stops.
2.
Open the finisher right side door.
11-6
Inserting a New Staple Cartridge into FS-113 Finisher (continued)
3.
Turn the dial to the left until the two staplers come to the centre.
4.
Pull up then forward the staple holder to remove it from the stapler.
Remove each staple holder from both stapler 1 (right) and stapler 2 (left).
5.
Add Toner
Push the two “PUSH” buttons of the staple holder to slide the top
cover upward, then remove the empty staple cartridge.
Add Staple
(FS-113)
Empty Waste
Basket (FS-113)
Add Staple
(FS-114)
2
Add Staple
(SK-114)
Empty Waste
Basket (PK-114)
1
11
Supplies
The staple cartridge cannot be removed from the staple holder if any staples
remain inside the staple cartridge. Do not remove it forcibly, otherwise the
staple holder may be damaged.
11-7
6.
Firmly insert the new staple cartridge into the staple holder.
7.
Push down the top cover to return it to its original position.
8.
Remove the lock tape.
9.
Return the staple holder to the stapler, and push it down until it clicks
in place.
11-8
10. Close the finisher right side door, then slide the Finisher to the right
to return it to its original position.
Add Toner
Add Staple
(FS-113)
Empty Waste
Basket (FS-113)
Add Staple
(FS-114)
Add Staple
(SK-114)
Empty Waste
Basket (PK-114)
11
Supplies
11-9
Empty Waste Basket of FS-113 Finisher
Before using Punch mode, perform the following procedure to check if the waste basket
is full, then empty the waste basket, if needed.
1.
Holding the finisher handle on the top, slide the Finisher to the left
until it stops.
2.
Open the finisher right side door.
3.
Withdraw the waste basket.
11-10
Empty Waste Basket of FS-113 Finisher (continued)
4.
5.
Return the waste basket, close the finisher right side door, then slide
the Finisher to the right to return it to its original position.
Add Toner
The waste basket is not disposable. Be sure to return it to its original
position.
Add Staple
(FS-113)
Empty Waste
Basket (FS-113)
Add Staple
(FS-114)
Add Staple
(SK-114)
Empty Waste
Basket (PK-114)
11
Supplies
11-11
Inserting a New Staple Cartridge into FS-114 Finisher
When the staple cartridge becomes empty in the FS-114 Finisher, the Basic Screen
displays the following message in the message area.
1.
Touch [OUTPUT] on the Basic Screen to display the Output Mode
Popup Menu.
2.
Touch ADD STAPLES.
The Moving Stapler Screen will be displayed while the stapler deeply positioned inside
the finisher moves toward the finisher front door.
DO NOT open the finisher front door while the Moving Stapler Screen is
displayed; otherwise the stapler stops before completing the movement and
cannot be reached to replace the staple cartridge.
11-12
3.
When the Check Stapler Screen is displayed, open the finisher front
door.
Stapler moving knob
If necessary, turn the stapler moving knob to bring the stapler forward.
Add Toner
4.
Remove the staple holder from the stapler.
Add Staple
(FS-113)
Empty Waste
Basket (FS-113)
2
Add Staple
(FS-114)
Add Staple
(SK-114)
1
Empty Waste
Basket (PK-114)
11
Supplies
11-13
5.
2
1
6.
7.
11-14
8.
9.
Return the staple holder to the stapler as shown in the illustration.
1
2
Add Toner
10. Close the finisher front door.
Add Staple
(FS-113)
11. Touch OK on the Output Mode popup menu to return to the Basic
Screen.
Empty Waste
Basket (FS-113)
Add Staple
(FS-114)
Add Staple
(SK-114)
Empty Waste
Basket (PK-114)
11
Supplies
11-15
Inserting a New Staple Cartridge into SK-114 Saddle Kit
When either of the two staple cartridges becomes empty in the SK-114 Saddle kit
mounted on FS-114 Finisher, the Basic Screen displays the following message in the
message area.
The screen message does not tell which staple holder is out of staples. Remove both
staple holders and check the cartridge to be replaced.
1.
Pull the Saddle tray open and hold it as it is.
If the extensible tray of the Exit tray 1 just under the Saddle tray is
withdrawn, push it back to its original position, otherwise it may disturb you
in the following procedure or machine trouble may occur.
11-16
Inserting a New Staple Cartridge into SK-114 Saddle Kit (continued)
2.
Remove the staple holder.
Push down the staple holder as shown below, then pull forward to remove it.
1
2
Gently return the Saddle tray to its original position.
Do not let the Saddle tray go abruptly, otherwise you may be injured.
3.
Add Toner
Add Staple
(FS-113)
1
Empty Waste
Basket (FS-113)
2
4.
Add Staple
(FS-114)
Add Staple
(SK-114)
Empty Waste
Basket (PK-114)
11
Supplies
11-17
5.
6.
7.
Return the staple holder to the stapler as shown in the illustration.
Hold the staple holder as shown below. While keeping the Saddle tray open, push in
the staple holder to its original position, then pull it up until it clicks in place.
2
1
11-18
8.
Open the stapling part of the Saddle kit, then close it.
The Saddle kit will be reset, and the copying job using Fold&Stitch mode will be
available.
1
2
Add Toner
Add Staple
(FS-113)
Empty Waste
Basket (FS-113)
Add Staple
(FS-114)
Add Staple
(SK-114)
Empty Waste
Basket (PK-114)
11
Supplies
11-19
Empty Waste Basket of PK-114 Punch Kit
When the waste basket of the PK-114 Punch kit mounted on the FS-114 Finisher, the
following message will be displayed on the touch screen, and the finished set will be
output without being punched.
Follow the procedure below to empty the waste basket.
1.
Open the finisher front door, then withdraw the waste basket.
2.
11-20
Empty Waste Basket of PK-114 Punch Kit (continued)
3.
Return the waste basket securely, then close the finisher front door.
Add Toner
Add Staple
(FS-113)
Empty Waste
Basket (FS-113)
Add Staple
(FS-114)
Add Staple
(SK-114)
Empty Waste
Basket (PK-114)
11
Supplies
11-21
Section 12:
12
Maintenance
How to Maintain the Copier
Cleaning Image Scanning Section .......................................................... 12-2
Cleaning Image Printing Section ............................................................. 12-5
Checking Copy Count.............................................................................. 12-7
Cleaning
Scanning
Section
Cleaning
Printning
Section
Checking
Copy Count
12
Maintenance
Cleaning Image Scanning Section
In order to maintain optimum copy quality, always keep the following areas clean.
Cleaning the Platen Glass and Cover
Raise the document feeder, and clean the glass with a clean soft cloth.
The glass may also be cleaned with a soft cloth dampened slightly with water, if it is
difficult to clean.
Never use paint solvents, such as benzene or thinners, to clean the platen
glass.
The platen cover should be kept clean; otherwise, soil marks may be copied, or the
original size cannot be detected correctly.
Raise the document cover, and clean the inner surface of the document cover with a
clean soft cloth.
Never use paint solvents, such as benzene or thinners, to clean the platen
cover.
12-2
Cleaning Image Scanning Section (continued)
Cleaning the RADF
Cleaning the Left Partition Glass
Keep the glass clean; otherwise soil marks may be copied, resulting in dark lines on the
copies.
Raise the document feeder, and clean the left partition glass with a clean soft cloth.
Cleaning the RADF Platen Guide Cover
The RADF platen guide cover should be kept clean; otherwise soil marks may be
copied or the original size cannot be detected correctly.
Raise the document feeder, and clean the RADF platen guide cover with a clean soft
cloth.
Cleaning
Scanning
Section
Never use paint solvents, such as benzene or thinners, to clean the RADF
platen guide cover.
Cleaning
Printning
Section
Checking
Copy Count
12
Maintenance
12-3
Cleaning Image Scanning Section (continued)
Cleaning the RADF Roller
Raise the document feeder, and clean the RADF roller with a clean soft cloth.
You may also clean with a soft cloth dampened slightly with water, if it is difficult to
clean.
Never use paint solvents, such as benzene or thinners, to clean the RADF
roller.
12-4
Cleaning Image Printing Section
Cleaning the Writing Unit Glass and the Electrode Wires
Keep the writing unit glass and the electrode (corona, transfer and separator) wires
clean; otherwise soil marks may be copied, resulting in dark lines on the copies.
Follow the procedure below to periodically clean them.
1.
2.
Open the machine front door.
3.
4.
Firmly push in these knobs, then close the machine front door.
Withdraw and push in the writing unit glass cleaning knob and the
corona wire cleaning knob, several times.
Open the right side door of the main body, release the two hooks on
the top edge of the conveyance unit cover (labeled 6), then open its
front cover.
Cleaning
Scanning
Section
Cleaning
Printning
Section
If the hooks cannot be released easily, open the conveyance unit cover
(labeled 6) to perform the following steps.
In this case, use care not to touch the drum inside the conveyance unit
cover (labeled 6), and quickly perform the cleaning procedure to close the
cover as soon as possible. The drum may be damaged by a long period of
exposure.
WARNING
The area near the conveyance unit cover (labeled 6) generates high
voltage. If touched, electrical shock may occur. DO NOT TOUCH!
12-5
Checking
Copy Count
12
Maintenance
Cleaning Image Printing Section (continued)
5.
Push and slide the transfer/separator wire cleaning lever to the left
and right, several times.
6.
Move the lever to the right until it stops, then close the front cover.
2
7.
12-6
1
Close the right side door of the main body.
Checking Copy Count
This function allows you to view the current indication of the following items as a list on
the touch panel: Total counter, FAX TX/RX counter (machine with the fax kit installed),
Printer counter (machine with the IP kit installed), and Scanner counter (machine
provided with Scanner function).
Check the count, then print it from the Counter List Screen, if desired.
To Displaly the Counter List Screen
1.
Press [COUNTER] on the control panel.
The Counter List Screen will be displayed.
The Counter List Screen can be displayed even if printing job is in progress.
To display the PM Counter Screen, press [CHECK]. Touching the Up arrow key on the
PM Counter Screen will resume the Counter List Screen.
Cleaning
Scanning
Section
Cleaning
Printning
Section
2.
Checking
Copy Count
12
Maintenance
12-7
Checking Copy Count (continued)
To Print the Counter List
1.
Press [COUNTER] on the control panel.
The Counter List Screen will be displayed.
The Counter List Screen can be displayed even if printing job is in progress.
2.
Touch PRINT.
The Basic Screen will be displayed.
3.
4.
Touch the desired tray key to select the copy size.
Press [START].
The counter list will be printed out.
When completed, the Counter list mode will be released automatically, with the Basic
Screen restored.
12-8
Section 13:
Key Operator
Mode
System Initial
Copier Initial
13
Key Operator Mode
How to Monitor Copier Activity and Modify
Machine Settings
How to Access the Key Operator Mode................................................... 13-2
[1] System Initial ...................................................................................... 13-4
[2] Copier Initial........................................................................................ 13-6
[3] Preset Key ........................................................................................ 13-16
[4] User Account (E.K.C.) ...................................................................... 13-18
[5] Lock Job Memory ............................................................................. 13-27
[6] Paper Type ....................................................................................... 13-28
[7] Panel Contrast .................................................................................. 13-29
[8] Key Operator Setting ........................................................................ 13-30
[9] Weekly Timer.................................................................................... 13-33
[10] Touch Panel Adjustment ................................................................. 13-41
[11] Power Save..................................................................................... 13-42
[12] Memory Switch............................................................................... 13-43
[13] List Print ......................................................................................... 13-47
[14] Application Customize .................................................................... 13-48
[15] Density Shift ................................................................................... 13-49
[16] KRDS Host ..................................................................................... 13-50
[17] Machine Mail Address Setting ........................................................ 13-51
[18] HDD Setting Menu.......................................................................... 13-52
[19] Finisher Adjustment........................................................................ 13-55
Preset Key
User
Account
Lock Job
Memory
Paper Type
Panel Contrast
Key Operator
Setting
Weekly
Timer
Touch Panel
Adjustment
Power Save
Memory
Switch
List Print
Application
Customize
Density Shift
KRDS Host
Machine Mail
Address
HDD Setting
Menu
Finisher
Adjustment
13
Key Operator
Mode
How to Access the Key Operator Mode
The Key Operator is trained to handle all special Key Operator functions that are not
accessible to the general user, such as monitoring overall copier activity, machine
performance, and service information, modifying machine settings, and controlling user
activity, for billing purposes.
A unique 1 to 8-digit Key Operator password is normally set by service at installation. If
the unique code is not set by service, the copier will not display Key Operator Password
Entry Screen when the Key Operator mode is being accessed, and a Key Operator
password will not be required. A service-set 8-digit User account (E.K.C.) master key
code must be entered by the Key Operator to access the Electronic Key Counter
functions, and a service-set 4-digit Weekly Timer master key code must be entered by
the Key Operator to access the Weekly Timer functions.
To ensure the security of Key Operator mode, it is recommended that you establish a
unique Key Operator password, along with the User account (E.K.C.) master key
code and Weekly Timer master key code, and keep them in a confidential file.
To Display the Key Operator Mode Screen
1.
2.
Press [HELP] on the control panel to display the Help Screen.
3.
Touch Password, enter your Key Operator password (up to 8
alphanumerical characters) using the touch screen keypad or the
control panel keypad, then touch OK both on the Data Input Screen
and Password Entry Screen.
Touch Key Ope mode on the Help Screen.
If Enhanced Security mode has been used in the machine, the password
entry procedure will be slightly different. Refer to the user’s guide provided
for the Security mode.
13-2
How to Access the Key Operator Mode (continued)
Key Operator
Mode
System Initial
Copier Initial
The Key Operator Mode Screen will be displayed.
Preset Key
• If an invalid Key Operator password is entered, continue by entering the
valid password. If the Key Operator password is not valid, check with
• Use the control panel keypad to enter the Key Operator password without
touching the Password key, if it consists of numbers only.
4.
User
Account
Lock Job
Memory
Paper Type
Touch 1. System/copier.
Panel Contrast
Key Operator
Setting
Weekly
Timer
Touch Panel
Adjustment
Power Save
The System/Copier Setting Menu Screen will be displayed.
5.
Make setting changes from the System/Copier Setting Menu Screen,
as described on the following pages.
Memory
Switch
List Print
Application
Customize
Density Shift
KRDS Host
Machine Mail
Address
HDD Setting
Menu
• To scroll to menus 11 to 19, touch
.
To return to the previous screen, touch
.
• The function number 16. KRDS host will be dimmed and cannot be
selected without the remote diagnostics activated.
• The function number 18. HDD setting menu will not be displayed on this
screen without the HDD mounted on the machine.
• Touch RETURN to restore the Key Operator Mode Screen for the Key
Operator settings in another mode.
13-3
Finisher
Adjustment
13
Key Operator
Mode
[1] System Initial
Set the following initial conditions of the copier.
• Time: Current date and time, summer time, difference in time
• Language: Language used in LCD (English)
[1] Time
Set the current date and time, the summer time, and also the time difference.
❒ Default setting: Summer time off
System Initial Setting Menu Screen
Date & Time Setting Screen
Procedure
1 Touch 1. System initial on the System/Copier Setting Menu Screen to display the
System Initial Setting Menu Screen.
2 Touch 1. Time to display the Date & Time Setting Screen.
3 Adjust the time.
The time that the copier currently has is displayed in the CURRENT TIME line, in the
order of date, month, year, and time (in 24-hour expression).
(1) Touch L or ! to move the cursor to the number to be changed.
(2) Use the control panel keypad to enter the number.
4 To activate the summer time function, touch SUMMER TIME to highlight it. The current
time will gain an hour.
5 The Difference in time setting is provided in order to give the time difference information
at the same time when E-mail is received.
To set this function, follow the procedure below.
(1) Touch Diff. In time to highlight it.
(2) Touch +/– to display “+” when the local time is earlier than Universal time, or “–”
when the local time is later.
(3) Touch L or ! to move the cursor to the number to be changed.
(4) Use the control panel keypad to enter the time difference between Universal time
and the local time in the machine setting area.
(e.g. Enter “–09:00” for 9 hours later than Universal time.)
(5) Touch OK to complete the setting and return to the Date & Time Setting Screen.
6 Touch OK to update the current time by the set time and return to the System Initial
Setting Menu Screen, or touch CANCEL to restore the previous setting.
7 Touch RETURN to restore the System/Copier Setting Menu Screen.
8 If no further changes are required, turn the machine power OFF then ON for normal
copying operations.
13-4
[1] System Initial (continued)
[2] Language
Select the language used in the LCD.
❒ Default setting: English
System Initial Setting Menu Screen
Key Operator
Mode
Language Selection Screen
System Initial
Copier Initial
Preset Key
User
Account
Lock Job
Memory
Procedure
1 Touch 1. System initial on the System/Copier Setting Menu Screen to display the
System Initial Setting Menu Screen.
2 Touch 2. Language to display the Language Selection Screen.
3 Select the desired language mode.
4 Touch OK to complete the setting and return to the System Initial Setting Menu Screen.
copying operations.
Paper Type
Panel Contrast
Key Operator
Setting
Weekly
Timer
Touch Panel
Adjustment
Power Save
Memory
Switch
List Print
Application
Customize
Density Shift
KRDS Host
Machine Mail
Address
HDD Setting
Menu
Finisher
Adjustment
13
Key Operator
Mode
13-5
[2] Copier Initial
Initial settings are the settings that display automatically when the copier is powered on,
when Auto Reset timer is operated, or when [AUTO RESET] key is pressed. These
settings can be changed by the Key Operator, as shown in this section.
Initially (i.e., at installation), the Basic Screen displays the following conditions to meet
Energy Star requirements:
Initial Setting
Copy Mode
Copy Density
Lens Mode
Paper Tray
Output Mode
: 1-1
: AE ON
: 1.00
: APS ON
: Offset sort (machine with Finisher)
Sort (machine with Inner tray or machine without Finisher)
Original Mode : Photo/Text
When Initial settings are changed by the Key Operator, the new initial settings display
when the copier is powered on, when Auto Reset timer is activated, or when [AUTO
RESET] key is pressed.
The following initial settings can be changed by the Key Operator:
Copy mode
Copy density
Lens mode
Paper tray
Output mode
: [RADF; 1-1, 1-2, 2-2, 2-1]
: [AE; manual]
: [AMS; ratio 0.25~4.00]
: [APS; trays 1, 2, 3, 4, LCT, or Multi-sheet bypass tray]
: [Main tray, Sub tray; Stack, Sort, Group, Staple, Punch;
Staple location; Punch position] (machine with FS-113)
[Exit tray 1, 2, 3, Saddle tray; Stack, Sort, Group, Staple,
Punch, Fold, Fold&Stitch; Staple location; Punch position]
(machine with FS-114)
[Exit tray 1, 2; Stack, Group, E-SORT+sort, E-SORT+group]
(machine with Inner tray)
: [Stack, Group, E-SORT+sort, E-SORT+group] (machine
without Finisher)
Non-Image
Area Erase : [Oblique erase, Rectangular erase; Original density]
Original Mode : [Photo/Text, Increase Contrast, Photo, Text]
Setting procedures are described on the following pages.
NOTES:
• The most commonly-used settings are established at installation. Before
changing any of the copier settings, be sure that you understand the
overall and long-range effect of the change.
• The machine will restore the initial settings specified by the Key Operator
unless the Memory switch No. 18 “Job memory auto recall” is turned ON
with the Job memory No. 15 registered.
13-6
[2] Copier Initial (continued)
[1] Copy Mode
Set Copy mode to occur after power on or after Auto Reset occurs.
❒ Setting options: RADF; 1-1; 1-2; 2-2; 2-1
❒ Default setting: RADF on, 1-1
Key Operator
Mode
System Initial
System/Copier Setting Menu Screen
Copier Initial Setting Screen
Copier Initial
Preset Key
User
Account
Lock Job
Memory
Copy Mode Initial Setting Screen
Paper Type
Panel Contrast
Key Operator
Setting
Weekly
Timer
Touch Panel
Adjustment
Procedure
1 Touch 2. Copier Initial on the System/Copier Setting Menu Screen to display the Copier
Initial Setting Screen, then touch 1. Copy Mode to display the Copy Mode Initial Setting
Screen.
2 Touch the setting you want for the initial condition of the copier.
If 1-2, 2-2 or 2-1 mode is selected, RADF will also be selected automatically. In this
case, the RADF must be in a closed position when power is turned ON, or when Auto
Reset is functioning. Otherwise, the message “Please close RADF” will be displayed.
3 Touch OK to complete the setting and return to the Copier Initial Setting Menu Screen.
If other copier initial setting changes are required, touch the desired key.
copying operations.
Power Save
Memory
Switch
List Print
Application
Customize
Density Shift
KRDS Host
Machine Mail
Address
HDD Setting
Menu
Finisher
Adjustment
13
Key Operator
Mode
13-7
[2] Density
Set Copy density to be effective after power on or after Auto Reset occurs.
❒ Setting options: AE; manual
❒ Default setting: AE on
Copy Density Initial Setting Screen
Procedure
1 Touch 2. Copier Initial to display the Copier Initial Setting Menu Screen, then touch 2.
Density to display the Copy Density Initial Setting Screen.
2 Touch AE to select the AE mode, or touch the density level required.
Nine exposure levels are displayed.
copying operations.
13-8
[3] Magnification
Set the magnification ratio you initially want to display after the user turns the power on
or after Auto Reset restores the Initial settings.
NOTICE:
This setting should not conflict with the Initial setting for Paper Tray. For
example, if APS is selected for the initial paper tray setting, a ratio setting
other than AMS will be ignored.
System Initial
Copier Initial
❒ Setting options: AMS; 1.00; ratio 0.25~4.00
Key Operator
Mode
Preset Key
User
Account
Lock Job
Memory
Paper Type
Panel Contrast
Magnification Initial Setting Screen
Key Operator
Setting
Weekly
Timer
Touch Panel
Adjustment
Power Save
Memory
Switch
Procedure
Magnification to display the Magnification Initial Setting Screen.
2 The default setting is 1.00.
Select the desired setting from the Magnification Initial Setting Screen:
To select 1.00 if it is not already highlighted, touch 1.00.
To select another ratio, touch upper/lower arrow key to display the desired ratio, or enter
a 3-digit ratio using the keypad on the control panel.
To select AMS, touch AMS.
copying operations.
List Print
Application
Customize
Density Shift
KRDS Host
Machine Mail
Address
HDD Setting
Menu
Finisher
Adjustment
13
Key Operator
Mode
13-9
[4] Tray
Set paper tray priority to be in effect after power is turned on or after Auto Reset occurs.
This function sets tray priority, not paper size priority. Therefore, if paper size is
changed in the tray, the tray will still remain the priority tray.
The initial paper tray setting should not conflict with the initial setting for Lens Mode. For
example, if the initial paper tray setting is APS, the initial setting for paper tray priority
will be ignored.
❒ Setting options: APS; trays 1, 2, 3, 4, LCT (option), or Multi-sheet bypass tray
❒ Default setting: APS on, no specified tray
Tray Initial Setting Screen
Procedure
Tray to display the Tray Initial Setting Screen.
2 Touch APS, or touch any tray key to select a specific tray.
copying operations.
13-10
[5] Output
Set initial Output mode of the Finisher, Inner tray or exit tray to be effective after power
is turned on or after Auto Reset occurs.
Key Operator
Mode
Machine with FS-113 Finisher
❒ Setting options: EXIT Main tray/ Sub Tray; OUTPUT MODE Stack/ Group/ Sort; STAPLE/
PUNCH Staple/ Punch; Staple Location; Punch position
❒ Default setting: EXIT Main tray; OUTPUT MODE Stack
System Initial
Copier Initial
Machine with FS-114 Finisher
❒ Setting options: EXIT Tray 1/ Tray 2/ Tray 3 (option)/ Saddle tray (with SK-114 Saddle kit);
OUTPUT MODE Stack/ Group/ Sort; STAPLE/PUNCH Staple/ Punch (with PK-114 Punch kit)/
Fold and Fold&Stitch (with SK-114 Saddle kit); Staple Location; Punch position
❒ Default setting: EXIT Main tray; OUTPUT MODE Stack
Preset Key
User
Account
Lock Job
Memory
Machine with IT-101 Inner Tray
❒ Setting options: EXIT Tray 1/ Tray 2; OUTPUT MODE Stack/ Group/ E-SORT+sort/ ESORT+group
❒ Default setting: EXIT Tray 1; OUTPUT MODE Stack
Paper Type
Panel Contrast
Machine without Finisher
Key Operator
Setting
❒ Setting options: OUTPUT MODE Stack/ Group/ E-SORT+sort/ E-SORT+group
❒ Default setting: OUTPUT MODE Stack
Weekly
Timer
Touch Panel
Adjustment
Power Save
Memory
Switch
List Print
Output Mode Initial Setting Screen
(machine with FS-113 Finisher)
(machine with FS-114)
Application
Customize
Density Shift
KRDS Host
Machine Mail
Address
Punch Position Initial Setting popup menu
HDD Setting
Menu
Staple Location Initial Setting popup menu
Finisher
Adjustment
13
Key Operator
Mode
13-11
(machine with IT-101)
(machine without Finisher)
Procedure
Output to display the Output Mode Initial Setting Screen.
2 For the machine with FS-113 Finisher, perform the following operation and proceed to
step 6.
To select the exit tray, touch MAIN TRAY or SUB TRAY.
NOTE:
Select MAIN TRAY to specify the Sort or Staple mode.
To select the Output mode, touch SORT or GROUP.
To use the Staple or Punch mode, touch STAPLE or PUNCH.
NOTES:
1. If STAPLE is selected, SORT is automatically highlighted.
2. If selecting Stack mode, do not highlight any of the SORT, GROUP, or
STAPLE.
To select the desired staple location, touch STAPLE SET. Touch the desired location on
the Staple Location Initial Setting popup menu, and touch OK.
To select the desired punch position, touch PUNCH SET under the STAPLE SET key.
Touch the desired punch position on the Punch Position Initial Setting popup menu, and
touch OK.
If desired, touch SORT, GROUP, or STAPLE to use one of these modes along with the
Punch mode.
3 For the machine with FS-114 Finisher, perform the following operation and proceed to
step 6.
To select the exit tray, touch the desired tray key in the EXIT area.
NOTE:
Select Saddle Tray to specify the Fold or Fold&Stitch mode.
To select the Output mode, touch SORT or GROUP.
To use the Staple mode, touch STAPLE.
NOTES:
1. If STAPLE is selected, SORT is automatically highlighted.
2. If selecting Stack mode, do not highlight any of the SORT, GROUP, or
STAPLE.
To select the desired staple location, touch STAPLE SET. Touch the desired location on
the Staple Location Initial Setting popup menu, and touch OK.
If the Finisher is mounted with SK-114 Saddle kit, the Fold or Fold&Stitch mode is also
available. To use these modes, touch FOLD or FOLD&STITCH.
If the Finisher is mounted with PK-114 Punch kit, the Punch mode is also available. To
use the Punch mode, touch PUNCH.
To select the desired punch position, touch PUNCH SET under the STAPLE SET key.
Touch the desired punch position on the Punch Position Initial Setting popup menu, and
touch OK.
If desired, touch SORT, GROUP, or STAPLE to use one of these modes along with the
Punch mode.
13-12
4 For the machine with IT-101 Inner tray, perform the following operation and proceed to
step 6.
To select the exit tray, touch TRAY 1 or TRAY 2.
To select the Output mode, touch GROUP, E-SORT+Sort, or E-SORT+Group.
5 For the machine without Finisher, perform the following operation and proceed to step 6.
To select the Output mode, touch GROUP, E-SORT+Sort, or E-SORT+Group.
6 Touch OK to complete the setting and return to the Copier Initial Setting Menu Screen. If
other copier initial setting changes are required, touch the desired key.
copying operations.
Key Operator
Mode
System Initial
Copier Initial
Preset Key
User
Account
Lock Job
Memory
Paper Type
Panel Contrast
Key Operator
Setting
Weekly
Timer
Touch Panel
Adjustment
Power Save
Memory
Switch
List Print
Application
Customize
Density Shift
KRDS Host
Machine Mail
Address
HDD Setting
Menu
Finisher
Adjustment
13
Key Operator
Mode
13-13
[6] Non-Image Erase
Select the mode of Non-Image Area Erase function to be in effect when this feature is
selected on the Application Selection Screen after power is turned on or after Auto
Reset occurs.
❒ Setting options: Oblique erase, Rectangular erase; Original density Auto/Manual
❒ Default setting: ERASE MODE Rectangular erase; ORIGINAL DENSITY AUTO
Non-Image Erase Initial Setting Screen
Procedure
Non-image Erase to display the Non-Image Erase Initial Setting Screen.
2 Touch Oblique erase or Rectangular erase, as desired.
You can also select the original density level to obtain the optimum copy effect using this
function. Touch AUTO, or select the density level required. Five exposure levels are
provided.
copying operations.
13-14
[7] Original Mode
Set the original mode to be effective after the user turns the power on or after Auto
Reset restores the Initial settings.
Key Operator
Mode
❒ Setting options: PHOTO/TEXT, INCREASE CONTRAST, PHOTO, TEXT
❒ Default setting: PHOTO/TEXT
System Initial
Copier Initial
Preset Key
User
Account
Lock Job
Memory
Paper Type
Original Mode Initial Setting Screen
Panel Contrast
Key Operator
Setting
Weekly
Timer
Touch Panel
Adjustment
Procedure
Power Save
Original mode to display the Original Mode Initial Setting Screen.
2 Touch the desired original mode key to highlight it.
If no further changes are required, turn the machine power OFF then ON for normal
copying operations.
Memory
Switch
List Print
Application
Customize
Density Shift
KRDS Host
Machine Mail
Address
HDD Setting
Menu
Finisher
Adjustment
13
Key Operator
Mode
13-15
[3] Preset Key
Set two userset density levels and three USERSETs of magnification.
[1] Density
Output copying samples from 16 density levels from Lighter to Normal or Normal to
Darker, then select the desired exposure and program it as USERSET 1.
The programmed copy density can be recalled by selecting USERSET 1 on the Basic
Screen.
Preset Key Setting Menu Screen
Userset Density Selection Screen
Procedure
1 Touch 3. Preset key on the System/Copier Setting Menu Screen to display the Preset
Key Setting Menu Screen.
2 Touch 1. Density to display the Userset Density Selection Screen.
3 Place the original on the platen glass or in the RADF.
4 Touch ON to highlight it. The USERSET key will be displayd on the Basic Screen when
restored.
5 Touch Userset1 or Userset2. The Userset Density Darker Setting Screen will be displayed.
6 To program Userset (1 or 2) to a darker Userset Density Darker Setting Screen
level, perform the following operation,
then proceed to step 7.
(1) Touch the desired number key to
select the density level. If the darker
level sample sheet is desired, touch
No.1 1~4, No.2 5~8, No.3 9~12, or
No.4 13~16, then press [START].
(2) Select the desired darker exposure
from the sample sheet(s), then
touch the density number from 1 to
Userset Density Lighter Setting Screen
16.
To program Userset (1 or 2) to a lighter
level, perform the following operation,
then proceed to step 7.
(1) Touch Lighter to display the
Userset Density Lighter Setting
Screen.
(2) Touch the desired number key to
select the density level. If the lighter
level sample sheet is desired, touch
No.1 1~4, No.2 5~8, No.3 9~12, or No.4 13~16, then press [START].
(3) Select the desired lighter exposure from the sample sheet(s), then touch the density
number from 1 to 16.
7 Touch OK to complete the setting and return to the Preset Key Setting Menu Screen.
copying operations.
13-16
[3] Preset Key (continued)
[2] Magnification
The preset and userset ratios are used to reduce and enlarge the original image to
accommodate copy paper size, and are available on the Basic Screen.
NOTE:
Normally, users are allowed to change the three USERSETs in the bottom
line on the Userset Magnification Setting Screen. The preset keys in the top
and middle lines can also be programmed in 2-5 DIPSW mode; however,
changing them is not recommended.
❒ Setting options
❒ Default setting
: Userset or Preset ratio
: USERSET1: 2.00
USERSET2: 4.00
USERSET3: 0.50
Preset Key Setting Menu Screen
Key Operator
Mode
System Initial
Copier Initial
Preset Key
User
Account
Lock Job
Memory
Userset Magnification Setting Screen
Paper Type
Panel Contrast
Key Operator
Setting
Weekly
Timer
Procedure
1 Touch 3. Preset key on the System/Copier Setting Menu Screen to display the Preset
Key Setting Menu Screen.
2 Touch 2. Magnification to display the Userset Magnification Setting Screen.
3 Touch the desired Magnification key you want to change, then enter a ratio from
0.25~4.00, using the keypad.
If a ratio under 0.25 is entered, 0.25 will be displayed.
If a ratio over 4.00 is entered, 4.00 will be displayed.
4 Touch OK to complete the setting and return to the Preset Key Setting Menu Screen.
copying operations.
Touch Panel
Adjustment
Power Save
Memory
Switch
List Print
Application
Customize
Density Shift
KRDS Host
Machine Mail
Address
HDD Setting
Menu
Finisher
Adjustment
13
Key Operator
Mode
13-17
[4] User Account (E.K.C.)
This function can only be accessed by the Key Operator after an 8-digit User account
(E.K.C.) master code is entered. The User Account (E.K.C.) allows you to monitor all
copying activity by controlling User ID accounts.
This feature can track copier usage for individual users and/or accounts as well as limit
access to the copier to authorized users. Copy quantity limits for specific accounts can
also be set. Use the EKC Key Operator Form provided at the end of this section to
record User ID information.
The User Account (E.K.C.) stores up to 256 User IDs, each of which represents a
separate account that can be used for billing and recordkeeping. The number of users
assigned to each account may depend upon the billing system in operation and the
number of individuals and departments using the copier. When the User Account
(E.K.C.) is activated, copying can be performed only after a valid User ID is entered.
Copy quantity and copy limit for each account can be visually confirmed on the screen.
If User Account (E.K.C.) needs to be activated on your machine, contact your service
representative.
The following User Account (E.K.C.) settings can be made:
1. Change User Account (E.K.C.) Data:
Create up to 256 individual User IDs, 00000~99999, and limit copy counts for each
User ID to a max. 999,999 copies.
2. User Account (E.K.C.) Data List:
Display the copy count for each User ID, and change limit settings.
3. All Counter Reset:
Clear the copy count for all passwords.
4. EKC On/Off Setting:
Select the function to be on or off. The initial setting is Off.
5. Copy Limit Reached Effect:
Set the machine condition when the copy limit is reached. The machine can be set to
stop immediately or after a job is completed, or to only display a warning message.
13-18
[4] User Account (E.K.C.) (continued)
How to Access the User Account (E.K.C.) Setting Mode
User Account (E.K.C.) Master Code Screen
Key Operator
Mode
System Initial
Copier Initial
Preset Key
User Account (E.K.C.) Setting Menu Screen
User
Account
Lock Job
Memory
Paper Type
Panel Contrast
Key Operator
Setting
Procedure
1 Touch 4. User account (E.K.C.) on the System/Copier Setting Menu Screen. The User
Account (E.K.C.) Master Code Screen displays, if a code is required.
2 Use the keypad on the touch screen or the control panel keypad to enter your 8-digit
User account (E.K.C.) master code, then touch OK to display the User Account (E.K.C.)
Setting Menu Screen.
NOTE:
If an invalid User account (E.K.C.) master code is entered, continue by
entering the valid 8-digit code.
3 Select the desired User Account (E.K.C.) function, and make settings, as required.
To exit the User Account (E.K.C.) setting mode, touch RETURN on User Account
(E.K.C.) Setting Menu Screen.
copying operations.
Weekly
Timer
Touch Panel
Adjustment
Power Save
Memory
Switch
List Print
Application
Customize
Density Shift
KRDS Host
Machine Mail
Address
HDD Setting
Menu
Finisher
Adjustment
13
Key Operator
Mode
13-19
[1] Change User Account (E.K.C.) Data
Assign an account number for an individual or for a group, then create individual
password(s) for each user. You can specify a name and E-Mail address for each
password.
❒
❒
❒
❒
❒
No.: account number from 000~255, designated by key operator
Name: Max. 20 characters
User ID: Unique 8-digit numeric code programmed by key operator for user
E-Mail address: E-Mail address of the user
Limit: 6-digit copy limit, clearing the counter
User Account Data Input Screen
Procedure
1 Touch 1. Change user account (E.K.C.) data on the User Account (E.K.C.) Setting
Menu Screen to display the User Account Data Input Screen.
2 The No. key is highlighted, enabling you to immediately enter an account number.
Enter a 3-digit account number from 000~255 using the keypad on the control panel.
3 Touch Name to display the Name Input Screen. If you do not specify the name, proceed
to step 6. This operation can be completed normally without the name specified.
4 Input the desired name according to the
Name Input Screen
procedure below.
(1) Max. 20 characters can be entered.
(2) Use Upper arrow and Lower arrow
keys on the Name Input Screen to
input uppercase and lowercase
letters and symbols.
(3) Touch DEL. to delete the input
character from the last.
(4) Touching CANCEL on the Name
Input Screen will clear all the input
characters.
(5) To change the existing name, touch DEL. to delete it and enter the new name.
5 Touch OK on the Name Input Screen to return to the User Account Data Input Screen.
6 Touch User ID to highlight it. Enter a 8-digit User ID using the keypad on the control
panel.
NOTES:
1. Do not enter “00000000”. The initial User ID value is “00000000”.
2. We recommend that you make a list of all User IDs and account numbers.
7 Touch COUNT/LIMIT to highlight it. Enter a 6-digit limit for the account number using the
control panel keypad. Touch Counter clear to reset the counter to zero.
NOTES:
1. If an invalid limit is entered, continue by entering the valid 6-digit limit.
2. Entering “000000” signifies no copy limit.
8 Touch E-Mail address. The key will be highlighted, enabling you to immediately enter
the E-Mail address. If you do not specify the E-Mail address, proceed to step 10.
13-20
9 Enter the E-Mail address of the user using the control panel keypad. Max. 64 characters
can be entered.
10 Touch OK to complete the settings and return to the User Account (E.K.C.) Setting Menu
Screen.
When the same User ID has been used Password Duplication Screen
fo r a n o t h e r a c c o u n t n u m b e r, t h e
Password Duplication Screen will be
displayed. To re-enter new User ID,
touch YES and return to the step 6. To
create duplicate User ID, touch NO, then
touch OK.
NOTE:
It is possible to assign the same User ID to
different account numbers. Note, however,
that the number of copies will be counted only for the User ID with the smallest account
number. Copy count for the other account numbers. will not be monitored.
We recommend you do not use duplicate User ID.
11 If other User Account (E.K.C.) setting changes are required, touch the desired key.
copying operations.
Key Operator
Mode
System Initial
Copier Initial
Preset Key
User
Account
Lock Job
Memory
Paper Type
Panel Contrast
Key Operator
Setting
Weekly
Timer
Touch Panel
Adjustment
Power Save
Memory
Switch
List Print
Application
Customize
Density Shift
KRDS Host
Machine Mail
Address
HDD Setting
Menu
Finisher
Adjustment
13
Key Operator
Mode
13-21
[2] User Account (E.K.C.) Data List
Use this setting to display the list of account numbers, and to edit or delete these User
Account (E.K.C.) data.
If the machine has the optional Fax kit and Printer Controller installed, the EKC Count
List Screen also allows you to check the facsimile transmission page count for each
account number.
❒ Edit items: Account No., Name, E-Mail address, copy limit, copy count
User Account Data List Screen
(COPY/PRINTER mode)
EKC Count List Screen
Procedure
1 Touch 2. User Account (E.K.C.) data list on the User Account (E.K.C.) Setting Menu
Screen to display the User Account Data List Screen.
2 To scroll the count list, touch the upper/lower bold arrow key on the right side of the
screen.
3 To check the count list, touch the upper/lower key on the right side of the list to highlight
the User account data to be checked, then touch EKC count. The EKC Count List
Screen will be displayed. Touch RETURN to restore the User Account Data List Screen.
NOTE:
If the machine is equipped with Fax kit and Printer Controller, the EKC
Count List Screen includes the scanner transmission count and facsimile
transmission count.
4 To delete the User account data, touch the upper/lower arrow key on the right side of the
list to highlight the User account data to be deleted, then touch DEL. The selected User
account data will be deleted from the list.
5 To edit the User account data, touch the upper/lower arrow key on the right side of the
list to highlight the User account data to be edited, then touch EDIT. The User Account
Data Input Screen will be displayed.
(1) To edit the User ID, touch User ID. Enter a new 8-digit User ID using the keypad on
the control panel. Do not enter “00000000”.
(2) To edit the name, touch Name. The Name Input Screen will be displayed. See p. 1319.
13-22
6
7
8
9
(3) To edit the copy or printer limit, touch Limit. Touch COPY or Printer to highlight the
key, then enter a new 6-digit limit using the keypad on the control panel. Entering
“000000” signifies no limit.
(4) To clear the copy count, touch Counter clear.
Touch OK on the User account data Input Screen to complete the settings and return to
the User Account Data List Screen.
To cancel the changes made in step 5, touch CANCEL to restore the User Account Data
List Screen.
Touch RETURN on the User Account Data List Screen to restore the User Account
(E.K.C.) Setting Menu Screen. If other User Account (E.K.C.) setting changes are
required, touch the desired key.
Touch RETURN to restore the System/Copier Setting Menu Screen.
If no further changes are required, turn the machine power OFF then ON for normal
copying operations.
Key Operator
Mode
System Initial
Copier Initial
Preset Key
User
Account
Lock Job
Memory
Paper Type
Panel Contrast
Key Operator
Setting
Weekly
Timer
Touch Panel
Adjustment
Power Save
Memory
Switch
List Print
Application
Customize
Density Shift
KRDS Host
Machine Mail
Address
HDD Setting
Menu
Finisher
Adjustment
13
Key Operator
Mode
13-23
[3] All Counter Reset
Reset the count for all account numbers.
❒ Setting options: Reset All Counters yes or no
All Counter Reset Screen
Procedure
1 Touch 3. All counter reset on the User Account (E.K.C.) Setting Menu Screen to display
the All Counter Reset Screen.
2 Touch Yes to reset all counters to zero.
Or, touch No not to reset. The selected key will be highlighted.
3 Touch RETURN to complete the settings and return to the User Account (E.K.C.) Setting
Menu Screen. If other User Account (E.K.C.) setting changes are required, touch the
desired key.
copying operations.
13-24
[4] EKC On/Off Setting
Use this function to turn EKC ON or OFF. If the machine has the optional Fax kit and
Printer Controller installed, set EKC ON or OFF individually for COPIER, FAX,
SCANNER, and PRINTER mode.
NOTE:
If EKC OFF is selected while User Account (E.K.C.) functions, the copier will
be enabled to perform copying jobs without an User ID entered, and both
copy count and copy limit functions will be discontinued.
❒ Default setting: EKC on
Key Operator
Mode
System Initial
Copier Initial
Preset Key
EKC On/Off Setting Screen
User
Account
Lock Job
Memory
Paper Type
Panel Contrast
Key Operator
Setting
Procedure
1 Touch 4. E.K.C. On/Off setting on the User Account (E.K.C.) Setting Menu Screen to
display the EKC On/Off Setting Screen.
2 Touch ON to activate User Account (E.K.C.) or touch OFF to de-activate User Account
(E.K.C.).
The selected key will be highlighted.
Screen.
If other User Account (E.K.C.) setting changes are required, touch the desired key.
copying operations.
Weekly
Timer
Touch Panel
Adjustment
Power Save
Memory
Switch
List Print
Application
Customize
Density Shift
KRDS Host
Machine Mail
Address
HDD Setting
Menu
Finisher
Adjustment
13
Key Operator
Mode
13-25
[5] Copy Limit Reached Effect
Use this function to select whether the copier will stop when the count limit is reached,
or if the copier will complete the copy job before stopping when reaching maximum
copy count.
❒ Setting options: Immediately, After job, Warning
❒ Default setting: After job
Copy Limit Reached Effect Screen
Procedure
1 Touch 5. Copy Limit Reached effect on the User Account (E.K.C.) Setting Menu
Screen to display the Copy Limit Reached Effect Screen.
2 Select setting option:
Touch Immediately to stop the copier when the copy limit is reached.
In this case, the paper in process will be completed, and the message “Enter User ID”
will display after the copier stops.
Touch After job to stop the copier after the current job is completed.
Touch Warning only to display a warning message when copy limit is reached.
Screen. If other User Account (E.K.C.) setting changes are required, touch the desired
key.
4 Touch RETURN to restore the System/Copier Setting Menu Screen. If other key
operator settings are required, touch the desired key.
copying operations.
13-26
[5] Lock Job Memory
Use this function to lock/unlock or delete a Job that has been programmed.
A locked Job is indicated by a lock icon ( ) on the Lock Job Memory Screen.
The settings of a locked job cannot be changed.
❒ Setting options: Lock Job memory, Unlock Job memory, Delete Job memory
Key Operator
Mode
System Initial
Lock Job Memory Screen
Copier Initial
Preset Key
User
Account
Lock Job
Memory
Procedure
1 Touch 5. Lock Job memory on the System/Copier Setting Menu Screen to display the
Lock Job Memory Screen.
2 To lock/unlock a job memory;
(1) Touch the desired job number key to highlight it.
(2) Touch Job Lock. The lock icon will appear on the touched key to show that the
selected job is locked. The previously locked job will be unlocked when selected,
and the lock icon on the touched key will disappear.
To delete a job memory;
(1) Touch the job number you want to delete.
(2) Touch DEL.
Selected programs and the name will be deleted from the job memory.
NOTES:
• A locked job can also be deleted, with the lock on the job number
released at the same time.
• Once deleted, the programs cannot be restored.
3 Touch RETURN to complete the setting and return to the System/Copier Setting Menu
Screen.
copying operations.
Paper Type
Panel Contrast
Key Operator
Setting
Weekly
Timer
Touch Panel
Adjustment
Power Save
Memory
Switch
List Print
Application
Customize
Density Shift
KRDS Host
Machine Mail
Address
HDD Setting
Menu
Finisher
Adjustment
13
Key Operator
Mode
13-27
[6] Paper Type
Use this function to indicate a specific paper type for each tray key on the Basic
Screen. This is especially useful when special paper is used on a regular basis and is
always placed in a specific paper tray.
NOTE:
The Multi-sheet bypass tray paper type can also be specified on the Basic
Screen.
Paper Type Setting Screen
Procedure
1 Touch 6. Paper type on the System/Copier Setting Menu Screen to display the Paper
Type Setting Screen.
2 Touch the desired paper tray to highlight it.
3 Touch the c Upper arrow or d Lower arrow key to select paper type.
The name of paper type displayed on the highlighted tray key will change as follows:
Main body tray / Drawer base unit tray / LCT
---(blank)! RECYCL ! User
---(blank)! OHP ! Thin ! Thick1 !Thick2 ! RECYCL ! User
Touch the arrow keys until the desired name appears.
4 Touch OK on the Paper Type Setting Screen to complete the setting and return to the
System/Copier Setting Menu Screen.
copying operations.
13-28
[7] Panel Contrast
Use this feature to adjust the level of brightness of the touch screen portion of the
control panel.
Panel Contrast Screen
Key Operator
Mode
System Initial
Copier Initial
Preset Key
User
Account
Procedure
1 Touch 7. Panel contrast on the System/Copier Setting Menu Screen to display the
Panel Contrast Screen.
2 Adjust the backlight contrast, as desired.
Touch DARK, NORM, or LIGHT to make the backlight contrast dimmer or brighter than
the current condition.
Screen.
copying operations.
Lock Job
Memory
Paper Type
Panel Contrast
Key Operator
Setting
Weekly
Timer
Touch Panel
Adjustment
Power Save
Memory
Switch
List Print
Application
Customize
Density Shift
KRDS Host
Machine Mail
Address
HDD Setting
Menu
Finisher
Adjustment
13
Key Operator
Mode
13-29
[8] Key Operator Setting
Use this screen to enter the Key Operator data indicated on the Help Screen selected
from the Basic Screen, and also to allow the network PC of the Key Operator to be
informed of the current machine status by E-mail.
[1] Key Operator Data Setting
Enter the name, extension number and the e-mail address of the Key Operator
indicated on the Help Screen.
NOTE:
This setting does not necessarily have to be entered.
❒ Setting options: Max. 20-character Key Operator name; 8-digit Key Operator telephone
extension; Max. 64-character Key Operator e-mail address
Key Operator Setting Menu Screen
Key Operator Data Input Screen
Name Input Screen
Procedure
1 Touch 8. Key operator setting on the System/Copier Setting Menu Screen to display
the Key Operator Setting Menu Screen.
2 Touch 1. Key ope. Data to display the Key Operator Data Input Screen.
3 Touch Name to display the Name Input Screen, then enter the Key Operator name up to
20 characters from the touch screen keypad.
NOTE:
For details of Name Input Screen, see p. 13-20.
4 Touch For Assistance to highlight it, then enter an 8-digit extension number from the
control panel keypad.
The first entered number will appear at far right then shift to the left as you enter new
number.
5 Touch E-mail address to display the Name Input Screen, then enter the E-Mail address
of the Key Operator from the touch screen keypad.
6 Touch OK to complete the setting and return to the System/Copier Setting Menu Screen.
copying operations.
13-30
[8] Key Operator Setting (continued)
[2] E-Mail Notification Setting
When the machine requires troubleshooting or maintenance such as paper or toner
supply, this setting allows the network PC of the Key Operator to be informed of the
current machine status by E-mail.
The following information items are provided, and more than one e-mail address can be
registered to receive this information.
• No Paper
• Toner Stop
• Paper Jam
• Operator Attention
• PM
• Fatal Error
• Stapler Empty
• Punch waste basket full
Key Operator Setting Menu Screen
Key Operator
Mode
System Initial
Copier Initial
Preset Key
User
Account
E-Mail Notification Setting Menu Screen
Lock Job
Memory
Paper Type
Panel Contrast
Key Operator
Setting
E-Mail Notification ON/OFF Setting Screen
E-Mail Notification Address Setting Screen
Weekly
Timer
Touch Panel
Adjustment
Power Save
Memory
Switch
E-Mail Notification Item Setting Screen
E-Mail Notification Item Setting Screen
List Print
Application
Customize
Density Shift
KRDS Host
Machine Mail
Address
Procedure
1 Touch 8. Key operator setting on the System/Copier Setting Menu Screen to display
the Key Operator Setting Menu Screen.
2 Touch 2. E-Mail Notification to display the E-Mail Notification Setting Menu Screen.
3 Specify whether to enable or disable this function.
(1) Touch 1. Enable E-Mail Notice to display the E-Mail Notification ON/OFF Setting
Screen.
(2) Touch ON to enable this function, or touch OFF to disable it.
(3) Touch OK to complete the setting, or touch CANCEL to restore the previous setting.
The E-Mail Notification Setting Menu Screen will be restored.
13-31
HDD Setting
Menu
Finisher
Adjustment
13
Key Operator
Mode
[8] Key Operator Setting (continued)
4 Enter the e-mail address to be informed.
(1) Touch 1. Enable E-Mail Notice to display the E-Mail Notification ON/OFF Setting
Screen.
(2) Touch Notification address to display the E-Mail Notification Address Setting
Screen.
(3) Touch Key operator E-Mail to designate the e-mail address of the Key Operator
that has already been specified in the Key Operator data setting.
(4) To newly enter the e-mail address, touch Enter address to display the Data Input
Screen, then enter the desired e-mail address from the touch screen keypad. (Max.
64 characters)
NOTE:
More than one address can be entered using comma as a separator.
5 Specify the information item.
(1) Touch 2. E-Mail Notify item to display the E-Mail Notification Item Setting Screen.
(2) Touch the arrow keys
and
at the upper right to scroll the screen.
(3) To select the information item, touch ON to highlight it.
Screen.
copying operations.
13-32
[9] Weekly Timer
This function can be accessed only by the Key Operator after a unique 4-digit Weekly
Timer master key code is entered.
The Weekly Timer is a copier management function that shuts down power to the
machine on a daily or hourly basis, and can be programmed specifically for lunch
breaks, weekends and holidays, or any time the copier is not required.
Key Operator
Mode
System Initial
In Addition, Timer Interrupt can be enabled (with or without a password requirement) to
allow temporary use of the machine during periods when power is shut down by the
Timer function.
Copier Initial
Preset Key
Conditions required to use the Weekly Timer:
• The power plug is inserted into the socket.
• The power switch is turned on.
• The current date and time are correctly set.
User
Account
Lock Job
Memory
If the Weekly Timer needs to be activated on your machine, contact your service
representative.
Paper Type
Panel Contrast
The following Weekly Timer settings can be made.
Key Operator
Setting
[1] Weekly Timer Setting
Enable and disable the Timer function.
Weekly
Timer
[2] Weekly Timer Copier ON/OFF Time Set
Specify the times that the copier will turn ON and OFF for each day of the week or
the entire week.
Touch Panel
Adjustment
Power Save
[3] Machine Working Day Individual Set
Specify the working days of the machine by the Timer, for all Mondays through
Sundays, and/or individually for each day of the given month.
Memory
Switch
List Print
[4] Lunch Hour Off Function
Specify the lunch time interval during which the copier will go off and on.
Application
Customize
[5] Password Setting
Require Password entry for the Timer off function and establish the amount of
usage time.
NOTES:
1 The time is set in terms of the 24 hour clock, where hour [1] is the first
hour after midnight and hour [24] is the hour of midnight. For example, 6
a.m. is 06:00 hours; 6 p.m. is 18:00 hours.
2 The [AUTO RESET] key is used to change numbers determined by the
SET touch key.
Density Shift
KRDS Host
Machine Mail
Address
HDD Setting
Menu
Finisher
Adjustment
13
Key Operator
Mode
13-33
[9] Weekly Timer (continued)
How to Access the Weekly Timer Setting Mode
Weekly Timer Master Key Code Screen
Weekly Timer Setting Menu Screen
Procedure
1 Touch 9. Weekly timer on the System/Copier Setting Menu Screen.
The Weekly Timer Master Key Code Screen displays when the 4-digit Weekly Timer
master key code is set by service.
Otherwise, the Weekly Timer Setting Menu Screen displays without the code
requirement.
2 If the Weekly Timer Master Key Code Screen is displayed, use the keypad on the touch
screen or the control panel kaypad to enter your 4-digit Weekly Timer master key code,
then touch OK to display the Weekly Timer Setting Menu Screen.
NOTE:
If an invalid Weekly Timer master key code is entered, continue by entering
the valid 4-digit code.
3 Select the desired Weekly Timer function, and make settings, as required.
4 To exit the Weekly Timer mode, touch RETURN on the Weekly Timer Setting Menu
Screen.
5 To exit the Key Operator mode, turn off the machine power.
13-34
[1] Weekly Timer Setting
❒ Default setting: Weekly timer OFF
Key Operator
Mode
Weekly Timer On/Off Setting Screen
System Initial
Copier Initial
Preset Key
User
Account
Procedure
1 Touch 1. Weekly timer setting to display the Weekly Timer On/Off Setting Screen.
2 Touch YES to activate Weekly Timer, or touch NO to de-activate Weekly Timer.
The selected key will be highlighted.
3 Touch OK to complete the setting and return to the Weekly Timer Setting Menu Screen.
copying operations.
Lock Job
Memory
Paper Type
Panel Contrast
Key Operator
Setting
Weekly
Timer
Touch Panel
Adjustment
Power Save
Memory
Switch
List Print
Application
Customize
Density Shift
KRDS Host
Machine Mail
Address
HDD Setting
Menu
Finisher
Adjustment
13
Key Operator
Mode
13-35
[2] Weekly Timer Copier ON/OFF Time Set
Use this function to set the On/Off times in hours and minutes for each day of the week
or set the block time for the entire week, i.e., the same On/Off time for each day.
Weekly Timer On/Off Time Setting Screen
Weekly Timer On/Off Time Block Setting Screen
Procedure
1 Touch 2. Weekly timer Copier ON/OFF time set to display the Weekly Timer On/Off
Time Setting Screen.
2 Use the procedure below to set the ON time and OFF time for the desired days of the
week.
(1) Touch EDIT to display the Weekly Timer On/Off Time Block Setting Screen.
(2) Touch and highlight the keys of the desired day of the week from Monday through
Sunday to set the same ON time and OFF time.
(3) Touch ON to enter the ON time.
Enter a 2-digit ON-hour (ex. 8 a.m. is 08) and a 2-digit ON-minute (ex. 7 min. is 07)
using the control panel keypad.
(4) Touch OFF to enter the OFF time.
Enter a 2-digit OFF-hour (ex. 6 p.m. is 18) and a 2-digit OFF-minute using the control
panel keypad.
NOTES:
• If ON-time and OFF-time are the same, power will not go on.
• Be sure to enter both ON time and OFF time.
• Be sure to enter the ON/OFF time for a day off also, so that you can
specify the machine working days on the Weekly Timer Working Day
Individual/Collective Setting Screen.
(5) Touch OK to complete the settings and return to the Weekly Timer On/Off Time
Setting Screen.
(6) Confirm the ON time and OFF time on the screen.
3 Use the procedure below to delete the ON time and OFF time of the day of the week.
(1) Use the upper/lower arrow key to select the day of the week to be deleted.
(2) Touch DEL.
(3) ON time and Off the of the day of the week are deleted and “--:--” are displayed.
13-36
NOTE:
On the day of the week with the ON/OFF time deleted, you can not turn on
the power.
4 Touch RETURN to complete the settings and return to the Weekly Timer Setting Menu
Screen.
copying operations.
Key Operator
Mode
System Initial
Copier Initial
Preset Key
User
Account
Lock Job
Memory
Paper Type
Panel Contrast
Key Operator
Setting
Weekly
Timer
Touch Panel
Adjustment
Power Save
Memory
Switch
List Print
Application
Customize
Density Shift
KRDS Host
Machine Mail
Address
HDD Setting
Menu
Finisher
Adjustment
13
Key Operator
Mode
13-37
[3] Machine Working Day Individual Set
Use this function to set the On/Off condition of the copier for a given month. Set the On/
Off condition for specific days; or set it collectively, for all Mondays through Sundays of
the given month. The default setting is collective: On for Mondays through Saturdays,
and Off for Sundays.
W.T. Working Day Individual Setting Screen
W.T. Working Day Block Setting Screen
Procedure
1 Touch 3. Machine working day individual set to display the W.T. Working Day
Individual Setting Screen.
The days of the current month are displayed on the left half of the screen, with timeractive days highlighted.
2 To activate or deactivate the Timer for any individual day, touch the key for that day to
change its indication.
To change the month, use arrows to scroll to the desired month.
3 To collectively set the on/off data for the entire month by the day of the week, touch
Block Set to display the W.T. Working Day Block Setting Screen.
Touch the ON or OFF key for the desired day. If you touch an already-highlighted key, no
change will occur.
Touch OK to complete the settings and return to the W.T. Working Day Individual Setting
Screen.
NOTE:
The selected days will be highlighted in black on the W.T. Working Day
Individual Setting Screen when restored, however, the working day
individual setting has priority so that you can make setting change for each
day on that screen, if desired.
4 Touch RETURN to complete the settings and return to the Weekly Timer Setting Menu
Screen.
copying operations.
13-38
[4] Lunch Hour Off Function
The Weekly Timer function turns the copier ON and OFF once a day. Use this Lunch
hour off function to shut down power for lunch break then turn on again while the copier
is turned on due to the Weekly Timer function. Only one off-time interval can be
programmed.
Key Operator
Mode
System Initial
Lunch Hour Off Setting Screen
Copier Initial
Preset Key
User
Account
Lock Job
Memory
Procedure
Paper Type
1 Touch 4. Lunch hour off function to display the Lunch Hour Off Setting Screen.
2 Use the procedure below to activate the Lunch hour off function.
(1) Touch Function ON to highlight it.
(2) Touch off-time.
Enter a 2-digit off-hour (ex. 9 a.m. is 09) and a 2-digit off-minute (ex. 7 min. is 07)
using the control panel keypad.
(3) Touch on-time.
Enter a 2-digit on-hour and a 2-digit on-minute using the control panel keypad.
3 Touch Function OFF to de-activate the Lunch hour off function. The time setting area
will appear grayed out and cannot be selected.
The Function OFF setting is the factory default setting.
4 Touch OK to complete the setting and return to the Weekly Timer Setting Menu Screen.
copying operations.
Panel Contrast
Key Operator
Setting
Weekly
Timer
Touch Panel
Adjustment
Power Save
Memory
Switch
List Print
Application
Customize
Density Shift
KRDS Host
Machine Mail
Address
HDD Setting
Menu
Finisher
Adjustment
13
Key Operator
Mode
13-39
[5] Password Setting
Use this password setting mode to establish a 4-digit password requirement for using
Timer Interrupt function. The default password of 0000 allows the timer function to be
interrupted without the requirement for password entry.
W.T. Interrupt Password Setting Screen
Procedure
1 Touch 5. Password setting to display the W.T. Interrupt Password Setting Screen.
2 Use the touch screen keypad or the control panel keypad to enter a 4-digit password,
and then touch OK to complete the setting.
NOTE:
When the password setting is 0000, timer interrupt can be used simply by
turning the copier OFF, then ON.
3 Touch RETURN to return to the Weekly Timer Setting Menu Screen.
copying operations.
13-40
[10] Touch Panel Adjustment
Use this feature to check malfunctions of the LCD touch screen due to the shift in
position of the touch sensor.
❒ When the Touch Panel Adjustment Screen does not display in step 2, press any key from the
control panel keypad [0] ~ [9].
Touch Panel Adjustment Screen
Key Operator
Mode
System Initial
Copier Initial
Preset Key
User
Account
Lock Job
Memory
Procedure
1 Touch 10. Touch panel adj. on the System/Copier Setting Menu Screen to display the
Touch Panel Adjustment Screen.
2 Touch the “+” indication at the upper right corner, then lower left corner on the screen.
The present coordinates will be displayed in the message area of the screen.
NOTE:
When touching the “+” indications, it is recommended that you use a sharp
point such as a pencil to be more accurate.
3 Check that the X coordinate and Y coordinate displayed in the first line of the message
area fall within the standard value displayed in the second line.
4 Touch the CHECKs at the upper left and lower right corners on the screen to check if the
buzzer tone functions normally.
5 If the coordinates fall out of the range of the standard value in step 3, or the buzzer tone
does not sound in step 4, repeat the adjustment procedure from 2 to 4.
6 Press [START] on the control panel to complete the setting and restore the System/
Copier Setting Menu Screen.
copying operations.
Paper Type
Panel Contrast
Key Operator
Setting
Weekly
Timer
Touch Panel
Adjustment
Power Save
Memory
Switch
List Print
Application
Customize
Density Shift
KRDS Host
Machine Mail
Address
HDD Setting
Menu
Finisher
Adjustment
13
Key Operator
Mode
13-41
[11] Power Save
Select the interval of time that must elapse before Auto Low Power and Auto Shut Off
become activated. Or, select the Auto Shut Off function to ON or OFF.
Power Save Timer Setting Screen
Procedure
1 Touch 11. Power Save on the System/Copier Setting Menu Screen to display the Power
Save Timer Setting Screen.
2 Touch the timer key in each area to select a specific waiting period before activating the
Auto Low Power or Auto Shut Off.
NOTES:
1 The period of time selected for Auto Low Power cannot exceed the Auto
Shut Off setting.
2 If the same period of time as Auto Shut Off is selected for Auto Low
Power, the Auto Shut Off will function instead of Auto Low Power.
3 To use the Auto Shut Off function, touch ON to highlight the key, or touch OFF to
deactivate it. The default setting is ON.
4 Touch RETURN to complete the setting and restore the System/Copier Setting Menu
Screen.
copying operations.
13-42
[12] Memory Switch
This function allows you to change the Memory Settings listed below. See pp. 13-44 ~
13-46 for details on Memory Settings.
SW No.
Item
Setting (default is underlined)
No. 01: Auto reset timer
No. 02:
No. 03:
No. 04:
No. 05:
No. 06:
No. 07:
No. 08:
No. 09:
No. 10:
No. 11:
No. 12:
No. 13:
No. 14:
No. 15:
No. 16:
No. 17:
No. 18:
No. 19:
No. 20:
No. 21:
No. 22:
AUTO/RESET effect
Load RADF effect
Non Image A. Erase
RADF frame erasure
Auto tray switch
Platen APS
RADF APS
ATS/APS (Bypass)
ATS/APS SW (Tray 1)
ATS/APS SW (Tray 2)
ATS/APS SW (Tray 3)
ATS/APS SW (Tray 4)
ATS/APS SW (LCT)
Platen AMS
RADF AMS
Staple mode reset
Key click sound
Job memory recall
Sheet insertion
A5 orig.type
Rotation
No. 23:
No. 24:
No. 25:
No. 26:
No. 27:
No. 28:
No. 29:
No. 30:
1 SHOT indication
AUTO START
No- printing timer
Power save key
Bypass tray size
Letter Head
APS priority
Rotation copy of enlarge
OFF / 30 sec. / 60 sec. / 90 sec. / 120 sec./ 150
sec. / 180 sec. / 210 sec. / 240 sec. / 270 sec. /
300 sec.
Full-Auto / Initial setting
RADF / RADF+Auto Reset
ON/ APS/AMS only
None / 1mm / 2mm / 3mm / 4mm / 5mm
OFF / ON
OFF / ON
OFF / ON
OFF / ON
OFF / ON
OFF / ON
OFF / ON
OFF / ON
OFF / ON
OFF / ON
OFF / ON
OFF / ON
OFF / Low / High
OFF / ON
Tray 1 / Tray 2 / Tray 3 / Tray 4 / Bypass
Landscape / Portrait
OFF / ON / APS/AMS/Reduce / APS/AMS only
/ APS only
1 sec. / 2 sec. / 3 sec. / 4 sec. / 5 sec.
OFF / ON
OFF / 15 sec. / 30 sec. / 60 sec. / 90 sec.
Power Save / Shut Off
Standard size / Non standard size / Long length
Tray 1 / Tray 2 / Tray 3 / Tray 4 / OFF
Tray 1 / Tray 2 / Tray 3 / Tray 4 / LCT
OFF / ON
NOTE:
The memory switch No. 28 is not initially provided on the Memory Switch
Screen. Contact your service representative if you would like to use this
function.
Key Operator
Mode
System Initial
Copier Initial
Preset Key
User
Account
Lock Job
Memory
Paper Type
Panel Contrast
Key Operator
Setting
Weekly
Timer
Touch Panel
Adjustment
Power Save
Memory
Switch
List Print
Application
Customize
Density Shift
KRDS Host
Machine Mail
Address
HDD Setting
Menu
Memory Switch Screen
Finisher
Adjustment
13
Key Operator
Mode
13-43
[12] Memory Switch (continued)
Memory Switch Screen 2
Procedure
1 Touch 12. Memory SW on the System/Copier Setting Menu Screen to display the
Memory Switch Screen.
2 Use the procedure below to select the desired item and change the setting.
(1) Touch the arrow keys at the right side of the item list to select the desired item.
(2) Touch the arrow keys
and
at the upper right to scroll the screen.
(3) Touch EDIT to change the setting of the highlighted item.
(4) Repeat above steps (1) to (3) to make several changes in succession.
copying operations.
The following functions can be provided by the Memory switch settings.
[1] Auto reset timer
Sets the time interval for the machine to reset to the initial condition.
Options: Off or 30/60/90/120/150/180/210/240/270/300 seconds.
[2] AUTO/RESET effect
Sets the condition of Copy mode, Copy density, Magnification, and Paper tray selection
when the [AUTO RESET] key is pressed.
Options: Full-auto (factory setting) or Initial setting (key operator setting). Initial is the
default setting.
[3] Load RADF effect
Determines how the machine initializes when it is in the platen copy mode (non RADF)
and an original is inserted in the RADF feed tray.
Options: RADF and RADF + Auto Reset. The RADF option will activate the RADF
without resetting any other features. The RADF + Auto Reset option will activate the
RADF and reset the machine to the features programmed in memory switch #2.
[4] Non Image Area Erase
Establishes how the machine determines the image area of the copy.
Options: ON and APS/AMS only. ON option limits the copy image area to that of the
original. The APS/AMS only option limits the copy image area to that of the copy paper
sizes and the magnification automatically selected by the machine.
13-44
[5] RADF frame erasure
Sets the amount of frame erase when using the RADF.
Options: None, 1mm/ 2mm/ 3mm/ 4mm/ 5mm.
[6] Auto tray switch
During a copy job when ATS is on and multiple paper trays are loaded with the same
size paper, the machine will automatically switch to another tray when the initial tray
runs out of paper. Refer to memory switches 9 through 14 to activate this feature for
each tray.
[7] Platen APS
This feature allows the machine to automatically detect the size of the original placed
on the glass and select the same size copy paper. Refer to switches 9 through 14 to
activate this feature for each tray.
[8] RADF APS
This feature allows the machine to detect the size of the original fed through the RADF.
Refer to switches 9 through 14 to activate this feature for each tray.
Key Operator
Mode
System Initial
Copier Initial
Preset Key
User
Account
Lock Job
Memory
Paper Type
Panel Contrast
[9] ATS/APS (Bypass)
This setting activates ATS and APS (platen and RADF) for Multi-sheet bypass.
Key Operator
Setting
[10] ATS/APS SW (Tray 1)
This setting activates ATS and APS (platen and RADF) for Tray 1.
Weekly
Timer
Touch Panel
Adjustment
Power Save
Memory
Switch
List Print
Application
Customize
[14] ATS/APS SW (LCT)
This setting activates ATS and APS (platen and RADF) for LCT.
Density Shift
[15] Platen AMS
This feature allows the machine to automatically select the proper magnification ratio
when copy paper size is selected manually and an original is placed on the platen
glass.
[16] RADF AMS
This feature allows the machine to automatically select the proper magnification ratio
when copy paper size is selected manually and an original is fed from the RADF.
[17] Staple mode reset
When copying in the sort/staple mode, this setting allows the machine to automatically
reset to non-staple mode when the job in progress is completed.
13-45
KRDS Host
Machine Mail
Address
HDD Setting
Menu
Finisher
Adjustment
13
Key Operator
Mode
[18] Key click sound
When this feature is Low or High, the machine activates a buzzer sound when the
touch sensitive screen is touched or any key is pressed. This confirms the machine
recognition of the selection.
[19] Job memory recall
This feature allows the machine to initialize using selections stored in job memory
No.15 when the power is turned on or the [AUTO RESET] key is pressed.
NOTE:
This function works only when job memory No.15 is registered.
[20] Sheet insertion
This setting allows selection of tray 1, tray 2, tray 3, tray 4, LCT, or Bypass as the
source of the inserted sheets.
[21] A5 orig. type
Selects orientation of A5 size originals.
Options: Landscape or portrait.
[22] Rotation
When turned on the feature allows the machine to automatically rotate an A4 original
image to match the manually selected paper size. For example, if an original is placed
in the RADF or on the platen glass in the A4R position and the A4 paper size is
selected, the machine will rotate the image to fit the A4 paper.
[23] 1 SHOT indication time
Determines the duration of messages that are displayed, i.e., 50 SHEETS MAXIMUM
IN STAPLE MODE. Options: 1/ 2/ 3/ 4 or 5 seconds.
[24] AUTO START
This feature allows the machine to start the copying operation as soon as the document
feeder/platen cover is closed down over the platen original.
[25] No-printing timer
Set the timer to allow the printing job to start after operating the copying job.
[26] Power save key
Select the power saver mode to be activated by pressing [POWER SAVER ON/OFF]
key.
[27] Bypass tray size
Select the paper size detectable on the Multi-sheet bypass tray.
[28] Letter Head
This setting allows selection of tray 1, tray 2, tray 3, tray 4, or none as the source of the
letterhead paper so that the top of the image data of the reverse side always comes
under the letterhead in duplex copying. When using this function, load the letterhead
paper with the letterhead side FACE DOWN.
NOTE:
This function is not factory-set. Contact your service representative, if desired.
[29] APS priority
Sets the priority tray in APS mode.
[30] Rotation copy of enlarge
When turned on the feature allows the machine to automatically rotate and enlarge an A4 or
B5 original image to match the short-edge-feeded A3 or B4 paper size.
13-46
[13] List Print
Use this function to print out the list selected from the following items.
• Job memory list: Programmed contents of Job memory
• User setting list: Machine information managed by User Account (E.K.C.) setting
and home position settings selected by user
• Font pattern:
Font patterns used in the machine
Key Operator
Mode
System Initial
List Print Screen
Copier Initial
Preset Key
User
Account
Lock Job
Memory
Procedure
Paper Type
1 Touch 13. List Print on the System/Copier Setting Menu Screen to display the List Print
Screen.
2 Touch the desired item on the screen to highlight it.
3 Touch PRINT to print out the desired list.
To suspend printing, press [STOP/CLEAR].
After completion of printing, the copier will automatically return to the List Print Screen.
When printing other lists, select the key and touch PRINT.
copying operations.
Panel Contrast
Key Operator
Setting
Weekly
Timer
Touch Panel
Adjustment
Power Save
Memory
Switch
List Print
Application
Customize
Density Shift
KRDS Host
Machine Mail
Address
HDD Setting
Menu
Finisher
Adjustment
13
Key Operator
Mode
13-47
[14] Application Customize
Use this function to rearrange, display, or hide the application keys on the Application
Selection Screen.
Application Customize Screen
Item Selection Screen
File Edit Customize Screen
Image Edit Customize Screen
Procedure
1 Touch 14. APPL customize to display the Application Customize Screen.
The application function keys currently set are displayed on the screen.
When setting change is desired, touch EDIT to display the Item Selection Screen.
2 Touch FILE EDIT or IMAGE EDIT, as desired. The File/Image Edit Customize Screen
will be displayed.
Touch Change buttons to restore the factory setting, if desired, then proceed to step 5.
3 On the File/Image Edit Customize Screen, touch to highlight the desired application
function key on the right, then touch ADD. Selected key will move to the left part of the
screen, while the key on the right will be dimmed to show inactivity.
To cancel the selection you made, touch to highlight the desired key on the left, then
touch DEL. The selected key will disappear.
Touch Pre-set to restore the previous setting.
4 Touch OK to complete the settings and return to the Item Selection Screen.
Touch another item key, if desired.
5 Touch RETURN to restore the Application Customize Screen.
Confirm the setting you made on this screen.
6 Touch OK to restore the System/Copier Setting Menu Screen.
copying operations.
13-48
[15] Density Shift
The copy density level can be shifted darker or lighter when used in combination with
Text/Photo Enhance.
Density shift selection can be made in each of four Text/Photo Enhance modes; Text/
Photo (general), Text, Photo, and Increase Contrast.
It shifts the density levels three levels lighter or two levels darker (Text/Photo, Text, and
Photo modes), and two levels lighter or three levels darker (Increase Contrast mode).
Key Operator
Mode
System Initial
❒ Setting options: Density shift 0/ 1/ 2/ 3/ 4/ 5
Copier Initial
Density shift 0
Preset Key
Density shift 1
User
Account
Density shift 2
Lock Job
Memory
Density shift 3
Paper Type
Density shift 4
Panel Contrast
Density shift 5
Key Operator
Setting
Density Shift Setting Screen
Weekly
Timer
Touch Panel
Adjustment
Power Save
Memory
Switch
List Print
Procedure
1 Touch 15. Density Shift to display the Density Shift Setting Screen.
2 Select the Text/Photo Enhance mode.
Touch Text/Photo, TEXT, PHOTO, or Increase contrast to highlight it, then enter the
desired density shift (from 0 to 5) using the control panel keypad.
3 Touch OK to complete the settings and return to the System/Copier Setting Menu
Screen.
copying operations.
Application
Customize
Density Shift
KRDS Host
Machine Mail
Address
HDD Setting
Menu
Finisher
Adjustment
13
Key Operator
Mode
13-49
[16] KRDS Host
When activated, the Remote Diagnostics option is automatically monitored by a
service representative. In case of machine trouble, select the KRDS host option. Your
service representative will contact you to determine the appropriate means for
resolving the problem.
❒ Setting options: Call for JAM; SC; No toner; No paper; Copy quality; Other reason
KRDS Host Menu Screen
Start Call Screen
Procedure
1 Touch 16. KRDS host to display the KRDS Host Menu Screen.
2 Touch 1. JAM history, 2. SC history, 3. NO TONER, 4. NO PAPER, 5. COPY
QUALITY, or 6. OTHER REASON, as required.
The Start Call Screen will be displayed.
3 Touch START to call remote service representative.
copying operations.
13-50
[17] Machine Mail Address Setting
Use this function to specify the E-mail address for the machine to receive internet fax,
or to use it as a From address of scanner.
Machine Mail Address Setting Screen
Key Operator
Mode
System Initial
Copier Initial
Preset Key
User
Account
Procedure
1 Touch 17. Machine mail address to display the Machine Mail Address Setting Screen.
2 Touch E-mail address to input the mail address. Touch OK to restore the Machine Mail
Address Setting Screen.
3 Touch OK to complete the setting and return to the System/Copier Setting Menu Screen.
copying operations
Lock Job
Memory
Paper Type
Panel Contrast
Key Operator
Setting
Weekly
Timer
Touch Panel
Adjustment
Power Save
Memory
Switch
List Print
Application
Customize
Density Shift
KRDS Host
Machine Mail
Address
HDD Setting
Menu
Finisher
Adjustment
13
Key Operator
Mode
13-51
[18] HDD Setting Menu
If the machine is mounted with the optional HD-103 Type-A hard disk unit, the following
functions are provided to manage the HDD.
• HDD Format: displays the HDD Format Screen to format the HDD.
• HDD capacity confirm/delete: displays the HDD Capacity Confirm/Delete Screen to
check the current capacity of the HDD, or delete the data stored in HDD.
• Unnecessary Box delete: displays the Unnecessary Box Delete Screen to delete the
unnecessary box.
Without the optional hard disk unit, the RAM disk may require to be formatted. In this
case, follow the procedure on the next page to format the RAM disk.
Procedure (HDD Setting)
HDD Setting Menu Screen
HDD Format Screen
HDD Capacity Confirm/Delete Screen
Delete Confirmation Popup Menu
Unnecessary Box Delete Screen
1 Touch 18. HDD setting menu to display the HDD Setting Menu Screen.
NOTE:
When the System/Copier Setting Menu Screen is displayed at the first time
on the machine, the 18. HDD setting menu key may appear dimmed to
show inactivity until a certain period of time passes.
It will become active sooner after the machine checks if the optional HDD is
installed.
13-52
[18] HDD Setting Menu (continued)
2 Touch 1. HDD Format, 2. HDD capacity confirm/delete, or 3. Unnecessary Box delete,
as required.
To format the HDD:
(1) Touch 1. HDD Format to display the HDD Format Screen.
(2) Touch YES. All the data stored in the HDD will be cleared.
Turn OFF then ON the main power switch to complete the formatting procedure.
Or, touch NO to cancel.
Touch RETURN on the HDD Format Screen to restore the HDD Setting Menu
Screen.
To check the current state of the HDD capacity or delete the HDD data:
(1) Touch 2. HDD capacity confirm/delete to display the HDD Capacity Confirm/Delete
Screen.
The used area and whole area of the HDD capacity will be indicated in MB, and the
available area in percentage.
(2) To delete the data stored in the HDD, touch DELETE under the desired data item.
The popup menu will appear to confirm that the selected data should be deleted.
(3) Touch YES to delete the data, or NO to cancel. After touching YES, be sure to turn
OFF the main power switch, then turn it ON again.
Touch RETURN to restore the HDD Setting Menu Screen.
To delete the unnecessary box:
(1) Touch 3. Unnecessary Box delete to display the Unnecessary Box Delete Screen.
(2) Touch YES to delete the unnecessary box, or NO to cancel. After touching YES, be
sure to turn OFF the main power switch, then turn it ON again.
Touch RETURN to restore the HDD Setting Menu Screen.
3 Touch RETURN on the HDD Setting Menu Screen to restore the System/Copier Setting
Menu Screen.
copying operations.
System Initial
Copier Initial
Preset Key
User
Account
Lock Job
Memory
Paper Type
Panel Contrast
Key Operator
Setting
Weekly
Timer
Touch Panel
Adjustment
Power Save
Memory
Switch
Procedure (RAM Disk Format)
Key Operator
Mode
List Print
HDD Setting Menu Screen
Application
Customize
Density Shift
KRDS Host
File Format Screen
Machine Mail
Address
File Format Screen
HDD Setting
Menu
Finisher
Adjustment
13
Key Operator
Mode
13-53
[18] HDD Setting Menu (continued)
1 Touch 18. HDD setting menu to display the HDD Setting Menu Screen.
NOTE:
When the System/Copier Setting Menu Screen is displayed at the first time
on the machine, the 18. HDD setting menu key may appear dimmed to
show inactivity until a certain period of time passes.
It will become active sooner after the machine checks if the optional HDD is
installed.
2 Touch 1. File format to display the File Format Screen.
3 Touch YES.
NOTE:
To cancel this procedure, touch NO to highlight it, then touch RETURN. The
HDD Setting Menu Screen will be restored.
4 The message “Please turn OFF main SW, then ON” will be displayed. Turn OFF the
main power switch, then turn it ON again. The Basic Screen will be restored.
13-54
[19] Finisher Adjustment
If optional FS-114 Finisher mounted with SK-114 Saddle kit / PK-114 Punch kit is
installed in your machine, use this mode to make fine adjustments to each function of
the finisher.
Finisher Adjustment Menu Screen
Key Operator
Mode
System Initial
Copier Initial
Preset Key
Fold&Stitch Position Adjustment Screen
Fold Position Adjustment Screen
User
Account
Lock Job
Memory
Paper Type
Panel Contrast
Punch Position Adjustment Screen
Punch Loop Adjustment Screen
Key Operator
Setting
Weekly
Timer
Touch Panel
Adjustment
Power Save
Adjustment Confirmation Screen (Basic Screen)
Memory
Switch
List Print
Application
Customize
Density Shift
KRDS Host
Procedure
1 Touch 19. FNS adj. to display the Finisher Adjustment Menu Screen.
2 Touch the desired menu key to display the adjustment screen for each function.
3 Specify the paper size.
Touch upper/lower arrow key to display the desired paper size in the message area.
NOTE:
This paper size setting is not required on the Punch Position Adjustment
Screen.
4 Specify the adjustment value.
Touch +/- to select “+” or “-” as desired, then enter the value using the screen keypad.
Check the entered value and previous value displayed in the upper-left side area.
13-55
Machine Mail
Address
HDD Setting
Menu
Finisher
Adjustment
13
Key Operator
Mode
[19] Finisher Adjustment (continued)
NOTE:
• If entered value does not fall within the limit indicated on each screen, the
largest value within the limit (according to the +/- sign) will be displayed.
• If wrong number is entered, continue entering the correct number.
5 Check the copy result of the adjustment.
Touch COPY on each adjustment screen to display the Basic Screen. Touch the size key
of the paper size specified in step 3, then press [START] on the control panel.
Check the output copy, then press [∗] and [#] on the control panel to return to the
adjustment screen.
NOTE:
Repeat the steps 4 to 5 till the desired adjustment result is obtained.
6 Touch SET to complete the setting.
Touch RETURN to restore the Finisher Adjustment Menu Screen.
copying operations.
13-56
Index
Index
Index
Symbols
# key 2-8
* key 2-8
Numerics
1.00 magnification mode 3-13
1-2 Copying 3-18
2 in 1 9-10
2-1 Copying 3-22
2-2 Copying 3-18
4 in 1 9-10
8 in 1 9-10
A
-A- key 3-11
ADD PAPER key 5-9
ADD TONER icon 2-10
Add toner icon 11-2
Adding Toner 11-2
ADU 2-6
AE (Automatic Exposure) 3-16
All Counter Reset 13-24
AMS (Automatic Magnification Selection) 3-11
Application Customiz 13-48
APPLICATION key 2-11, 9-2
Application Selection Screen 9-2
APS (Automatic Paper Selection) 3-9
APS priority 13-46
AUTO Layout 9-40
Auto Low Power 2-20, 13-42
AUTO RESET key 2-8
Auto Shut-Off 2-20, 13-42
B
Basic Screen 2-10
BK-114 Branch Kit 2-14
Booklet 9-13
Bypass key 3-24
C
C (CLEAR) key 2-8
Call for Service message 5-2
Call for Service Screen 5-2
CAUTION 1-4
Caution label 1-2
Change User Account (E.K.C.) Data 13-20
Chapter 9-7
CHECK key 2-8
Check mode 4-4
Combination 9-10
Contrast adjustment dial 2-9
Control panel 2-8
Conveyance unit cover 6 2-6
Copier Initial 13-6
Copy density 3-16
COPY key 2-8
Copy Limit Reached Effect 13-26
Copy Mode (Copier Initial) 13-7
Corona wire cleaning knob 2-5
Count/Set indicator 2-11
Counter 2-8
Counter List Screen 12-7
D
DANGER 1-4
DATA indicator 2-8
Date/Time indicator 2-10
Density (Copier Initial) 13-8
Density (Preset Key) 13-16
DENSITY setting area 2-11
Density Shift 13-49
Desk 2-3
Dial 2-13
Double-sided copy 3-18
Double-sided original 3-18, 3-22
Dual Page 9-21
E
E.K.C. 2-22
EKC On/Off Setting 13-25
Electrode wire 12-5
E-Mail Notification Setting 13-31
Environment 1-6
E-SORT+Group mode 3-32, 3-50
E-SORT+Sort mode 3-32, 3-50
Exit tray 2-3
Extensible tray 2-14, 2-16
Extension cord 1-5
F
FAX key 2-8
Finisher Adjustment 13-55
Fixed magnification mode 3-14
Fixing unit guide 5 2-6
Flip Side 2 9-25
Fold & Stitch mode 3-47
Fold mode 3-47
Folded Original 8-6
Frame/Fold Erasure 9-37
FS-113 Finisher 2-12
FS-114 Finisher 2-14
i
Index (continued)
G
Group mode 3-32, 3-34, 3-50
GUIDE key 5-5
H
HDD Ready icon 2-10
HDD Setting Menu 13-52
HELP key 2-8
HELP MENU key 4-12
Help Menu Screen 4-13
Help mode 4-12
Help Screen 4-12
I
Icon area 2-10
Image Insert 9-18
Image printing section 12-5
Image scanning section 12-2
Image Shift 9-42
Increase Contrast mode 8-2
Initial settings 4-7, 13-6
Installation Space 1-7
INTERRUPT key 2-8
Interrupt mode 4-6
J
JAM key 5-7
JOB LIST key 2-11
Job List Screen 3-30
Job memory 4-8
JOB MEMORY key 2-8
Job No. icon 2-10
Job recall mode 4-11
Job store mode 4-8
K
Key counter 2-2
Key Ope mode key 4-12
Key Operator Data 13-30
Key Operator Mode Screen 13-2
Key Operator password 13-2
Keypad 2-8
KRDS Host 13-50
L
Large capacity tray 2-2
LCD toucn screen 2-8
LCT top door 2-26
Left partition glass 12-3
Lens Mode 3-13
ii
LENS setting area 2-11
Limited use of the copier 5-3
List Print 13-47
Loading Paper 2-23
Lock icon 13-27
Lock Job Memory 13-27
Lunch Hour Off Function 13-39
M
Machine Configuration 2-2
Machine Mail Address Setting 13-51
Machine Working Day Individual Set 13-38
Magnification (Copier Initial) 13-9
Magnification (Preset Key) 13-17
Main power indicator 2-9
Main power switch 2-3
Memory Full message 5-10
Memory indicator 2-11
Memory overflow 5-10
Memory Switch 13-43
Message area 2-10
Mishandled paper 5-5
Mixed Original 8-4
MODE setting area 2-11
Multi-sheet bypass tray 2-2, 3-24
N
Non-Image Area Erase 9-27
Non-Image Erase (Copier Initial) 13-14
Non-Standard Size 8-8
O
OHP Interleave 9-16
Optional equipment 2-7
Original counter 2-10
Original Information 10-8
Original Mode (Copier Initial) 13-15
ORIGINAL MODE key 2-11, 8-2
Output (Copier Initial) 13-11
OUTPUT icon area 2-11
Output Mode with Finisher 3-34
Output Mode with Inner Tray 3-50
Output Mode without Finisher 3-32
OUTPUT setting area 2-11
Overlay 9-51
P
Panel Contrast 13-29
Paper feed roller 2-26
Paper indicator 2-23
Paper Information 10-2
Index (continued)
Paper misfeed 5-5
Paper Size 10-6
Paper Type (Key Operator Mode) 13-28
PAPER TYPE key 3-24
Paper Weight 10-2
Password Setting (Weekly Timer) 13-40
Photo mode 8-2
PK-114 Punch Kit 2-14
Platen cover 2-2
Platen Glass Originals 10-8
Platen store mode 3-26
Plug Socket 1-5
PM icon 2-10
Positioning Original on Platen Glass 3-5
Positioning originals in Folded original mode 3-4
Positioning originals in Mixed original mode 3-3
Positioning Originals in RADF 3-2
Power cord 1-5
Power OFF/ON Screen 5-12
Power plug 1-5
Power Save (Key Operator Mode) 13-42
POWER SAVER ON/OFF key 2-8
Power Source 1-5
Power switch 2-3, 2-8
Precautions 1-10
Preset Key 13-16
Preset ratio 3-14
Preventive Maintenance (PM) 5-4
Primary (Main) tray 2-12
PRINT key 2-8
Proof copy 4-2
PROOF COPY key 2-8
Punch mode 3-42
R
RADF 2-2
RADF icon 2-10
RADF Originals 10-9
RADF platen guide cover 12-3
RADF roller 12-4
RADF store mode 3-26
Rear guide plate 2-24
Reduce&Shift 9-44
Release knob 2-24
Repeat
AUTO/ Repeat Mode 9-34
Vert./Horiz. Mode 9-31
Report code No. 5-2
Reserve 3-28
RESERVE key 2-10
Reverse Image 9-29
Rotation 7-4
Rotation copy of enlarge 13-46
Rotation OFF key 2-11
S
Saddle kit stapler 2-17
Saddle tray 2-16
Sample copy 4-2
SCAN/SERVER key 2-8
Secondary (Sub) tray 2-12
SETTING key 2-10
Setting Print Quantity 3-7
Sheet/Cover Insertion 9-3
Side guide plate 2-24
Size indication dial 2-29
SIZE setting area 2-11
SK-114 Saddle Kit 2-16
Sort mode 3-34
Special paper 3-24, 10-7
Stack mode 3-32, 3-34, 3-50
Stamp 9-47
Standard equipment 2-7
Staple cartridge 11-6, 11-12, 11-16
Staple holder 2-13
Staple mode 3-38
Stapler 2-13
START key 2-8
STOP key 2-8
STORE key 2-11
Store mode 3-26
Summer time 13-4
System Initial 13-4
System/Copier Setting Menu Screen 13-3
T
Text mode 8-2
Text/Photo Enhance 8-2
Timer Interrupt mode 7-2
Timer Interrupt password 7-2
Toner bottle 11-2
Toner bottle cover 2-5
Top/Bottom erasure mode 9-37
Total counter 12-7
Touch Panel Adjustment 13-41
Transfer/Separator wire cleaning lever 2-6
Tray (Copier Initial) 13-10
Tray/ Exit Tray Capacity 10-3
Troubleshooting Tips 5-13
U
Unsuccessful Job List Screen 3-31
Unsuitable RADF Originals 10-8
User Account (E.K.C.) 2-22, 13-18
User Account (E.K.C.) Data List 13-22
User account (E.K.C.) master code 13-19
User ID 2-22
iii
Index (continued)
V
Vertical/Horizontal zoom mode 7-5
W
WARNING 1-4
Waste basket 2-13, 2-15, 2-17, 11-10, 11-20
Watermark 9-47
Weekly Timer 7-2
Weekly Timer (Key Operator Mode) 13-33
Weekly Timer Copier ON/OFF Time Set 13-36
Weekly Timer master key code 13-33
Weekly Timer Setting 13-35
Work table 2-2
Writing unit glass 12-5
Writing unit glass cleaning knob 2-5
Z
ZOOM key 3-14, 3-15
Zoom mode 3-15
iv
27LN97340-00
Recycled paper is used for the inside pages of this book.
Printed in China
2004. 2 z

Copier 1 Basic 2 Advanced - Konica Minolta Australia

Transcription

Similar documents

christmas brochure

Party Trays Relax. Eat. Enjoy.

information flyer - Penwell

FOR SALE - City of Brockton

July, 1993 - Stumpf Welding Supplies

Carrello Multiservice Multi-service trolleys Chariots à

milk crate - Melmat, Inc.

Product-Dispensador de Agua 2 - Oasis

What You Need for Modge Podge Tray Directions for

dave matthews band