Micrometers Calipers Indicators Scales Dial

Transcription

Measuring Tools
SECTION
G
Page
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
AGD and Test Indicators, Accessories.………...…….. G - 10
Bench Centers.…..……………………………………...... G - 39
Bore and Hole Gages.…..………………………………... G - 31
Calipers and Accessories.………………………………. G - 5
Chamfer Gages.……………………………………………. G - 20
Counter, Hour Meters.……………….…………………... G - 19
Depth Micrometers, Gages……………………………… G - 4
Drill, Tap Gages.…………………………………………... G - 63
Edge Finder, Wigglers……………………………………. G - 72
Electrical Testing……….…………………………………. G - 46
Gage Blocks, & Gage Pins………………………………. G - 40
Hardness Testers..………...……………………………... G - 38
Height Gages and Transfer Stands.…………………… G - 29
Magnetic Bases and Indicator Holders, Stands…….. G - 21
Micrometers and Accessories.…………………………. G - 1
Optical Inspection..……………….………………………. G - 61
Radius Gages.……………………………………………... G - 41
Reference Books.…………………………………………. G - 74
Roughness Gages………………………………………… G - 35
Set-up Tools.……………………………………………….. G - 42
Snap Gages.………...……………………………………... G - 33
Squares and Levels..…..…………………………………. G - 56
Surface Plates..……………………………………………. G - 44
Tachometers.………………………………………………. G - 48
Tapes and Rules..……………….………………………… G - 45
Thickness Gages.…………………………………………. G - 68
Thread Gaging……………………………………………... G - 47
Tool Sets.……………………………………………………. G - 24
PalcoDistributing.com ● [email protected] ● (910) 642-2705
Outside Micrometers
G-1
Outside Micrometers
Outside
Micrometer Sets
.0001 Inch Graduation
Order No.
Price
0 - 1"
1 - 2"
2 - 3"
3 - 4"
4 - 5"
5 - 6"
6 - 7"
7 - 8"
8 - 9"
9 - 10"
10 - 11"
11 - 12"
NB60-CRM1
NB60-CRM2
NB60-CRM3
NB60-CRM4
NB60-CRM5
NB60-CRM6
NB60-CRM7
NB60-CRM8
NB60-CRM9
NB60-CRM10
NB60-CRM11
NB60-CRM12
$Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Order No.
Price
0-1"
NB60-CM001
$Price
Ratchet Thimble Micrometers
Features:
• Improved repeatability for both “expert” and novice users
• Constant force device allows easy one hand operation
• Clearly audible ratchet
• 102 Series features full wrap heat insulation cover
• Certificate of Inspection provided
• Speeder for quick thimble rotation
•Carbide measuring faces
Range
Order No.
0 - 3"
0 - 4"
0 - 6"
NB60-3CRMS
NB60-4CRMS
NB60-6CRMS
Price
$Price
Price
Price
Outside Micrometer Set – .001"
Range
Order No.
Price
0-3"
NB60-3CMSX
$Price
Outside Micrometers
Range
Outside Micrometer Sets – .0001"
• Friction thimble, spindle lock
• Carbide faces, positive locking clamp
• Supplied with fitted case
• Sizes over 1" supplied with standard
• Micro-fine graduations on
satin-chrome finish
Closeout
Range
Order No.
Price
10 - 11"
11 - 12"
NB64-228011*
NB64-228012*
$Price
Price
* Available while supplies last.
0-1" Outside Micrometer
with Decimal Equivalents on Frame
MT80-102-707
Shown
Range
0-1"
0-1"
0-1"
0-1"
0-25mm
0-25mm
Graduations
.001"
.0001"
.001"
.0001"
0.01mm
0.001mm
Accuracy
±0.0001"
±0.0001"
±0.0001"
±0.0001"
±0.002mm
±0.002mm
Order No.
Price
MT80-101-711
MT80-101-717
MT80-102-711
MT80-102-717
MT80-102-701
MT80-102-707
PalcoDistributing.com
• Carbide tipped
• Lock nut
• Supplied with fitted case
and adjusting wrench
• Satin chrome finish
• Heat-insulated grip plate
• Ratchet thimble
• 2" and larger supplied
with standards
Range
• Ratchet thimble
• Carbide tipped faces
• Spindle lock
• Insulated grip
• Case and wrench
• Black decimal equivalents on satin
chrome finished forged steel frame
• Graduations: .0001"
• Friction thimble and locking nut
• Complete in case
$Price
Price
Price
Price
Price
Price
Order No. NA55-522350011 • $Price
Outside Micrometers
• Heat-insulated frame
• Clear graduations on satin-chrome finish
• Every thousandth numbered
• Zero adjustment
• .250" Measuring face
0-1/2" Outside Micrometers
• Fitted carrying case
• 2" and larger supplied with standards
Only 2.825" overall length!
Inch models have fraction
to decimal equivalent table.
Metric models have no
engravings.
Range
Thimble
1-2"
Friction
Order No.
Price
MT80-102-226*
$Price
Order No.
NA55-52230000
$Price
• 0-1/2" range • .001" graduation
• Forged steel frame
• Anvil and spindle hardened and precision
ground with micro lapped ends
• Satin chrome finish with clear, crisp
graduations on barrel and thimble
• Diameter of measuring faces: .197"
• Includes fitted case
P-693
Outside Micrometers
Series 436 Micrometer Sets
Outside Micrometers
G-2
Series 436 Micrometers
• Staggered lines and distinct, quick reading figures on sleeve
• Every thousandth numbered
• Black enamel finished frames
• Satin chrome finish on sleeve and thimble
• Spindle lock
With Standard
Letter of Certification
Non-Certified
Range
Starrett No.
Thimble
Order No.
Price
Order No.
Price
.001 Inch Graduation — Carbide Face
0 - 1"
1 - 2"
436.1XRL-1
436.1XRL-2
Ratchet MV70-67994
Ratchet MV70-68003
$Price MV70-67995
—
Price
$Price
—
Ratchet
Friction
Ratchet
Friction
Ratchet
Friction
Ratchet
Friction
Ratchet
Friction
Ratchet
Friction
MV70-67997
MV70-67999
MV70-68005
MV70-68007
MV70-68013
MV70-68015
MV70-68019
MV70-68021
MV70-68025
MV70-68027
MV70-68031
MV70-68033
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
MV70-67998
MV70-68000
MV70-68006
MV70-68008
MV70-68014
MV70-68016
MV70-68020
MV70-68022
MV70-68026
MV70-68028
MV70-68032
MV70-68034
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Range
Starrett No.
Order No.
0 - 3"
0 - 6"
0 - 12"
S436.1AXRLZ
S436.1CXRLZ
S436EXRLZ
MV70-68036
MV70-68044
MV70-52012
.0001 Inch Graduation — Ratchet Thimble — Carbide Face
Range
Starrett No.
Order No.
0 - 3"
0 - 4"
0 - 6"
ST436.1AXRLZ
ST436.1BXRLZ
ST436.1CXRLZ
MV70-68037
MV70-68041
MV70-68045
Valueline Micrometers
• Satin-chrome finish
• Carbide measuring faces
• Convertible “friction” to “feel” thimble sleeve
• Spindle locks are standard
• 1-2" and 2-3" models have insulated frames
• Where not provided, wooden cases and standards are available separately
0
1
2
3
4
5
-
1"
2"
3"
4"
5"
6"
Order No.
Price
MV45-25943
MV45-25944
MV45-25945
MV45-25946
MV45-25947
MV45-25948
$ Price
Price
Price
Price
Price
Price
Valueline Micrometer Sets
Range
Description
Order No.
0 - 3"
0 - 6"
With Standards
Without Standards
MV45-25984
MV45-25987
NSK
Price
$ Price
Price
Price
Top-of-the-Line Chrome
Frame Outside Micrometers
• Satin-chrome thimble
• Straight-line graduations
• Black enamel frame
• Spindle Lock
• Carbide-tipped anvils
• Fixed/Friction Thimble
• Meets Federal Specifications
Range
Price
$ Price
Price
Price
0 - 1" T436.1XRL-1
T436.1XFL-1
1 - 2" T436.1XRL-2
T436.1XFL-2
2 - 3" T436.1XRL-3
T436.1XFL-3
3 - 4" T436.1XRL-4
T436.1XFL-4
4 - 5" T436.1XRL-5
T436.1XFL-5
5 - 6" T436.1XRL-6
T436.1XFL-6
Series 436 Micrometers Supplied in Sets
.001 Inch Graduation — Ratchet Thimble — Carbide Face
.0001 Inch Graduation — Carbide Face
Price
$Price
Price
Outside Micrometers
Range
Description
Order No.
0 - 1"
0 - 1"
Slant/line graduations
Straight/line graduations
MV45-51089
MV45-51090
Price
$Price
Price
0.002 Metric Graduation
Range
Description
Order No.
Price
0-25mm
Slant/line graduations
MV45-51095
$Price
• Carbide faces
• Spindle lock • Complete with fitted
case and wrench
• Sizes over 1" supplied with standards
.001 Metric Graduation
Range
Thimble
Order No.
Price
25-50mm
Friction
MV30-YUXB02M*
$Price
Range
Thimble
Order No.
Price
1 - 2"
Ratchet
MV30-YAB03I*
$Price
Range
Order No.
Price
Range
Thimble
Order No.
Price
0 - 3"
MV30-YUXBW04I*
$Price
1 - 2"
Friction
MV30-YUXB02I*
$Price
.001 Inch Graduation — Sets
P-695
Digital Outside Micrometers
G-3
0-1" Digital Micrometers
Digital Micrometers
• Friction thimble (see note)
• Spindle lock
• Microfine graduation on thimble
• Reads .001" on digital display and reads .0001" on thimble
• Satin-chrome finished sleeve and thimble
• Reads .001" on digital
display, and reads
.0001" on sleeve
• Spindle lock (except
on plain models)
Order No.
Price
Range
Order No.
0-1"
MT80-193-201
$Price
0-25mm
50-75mm
75-100mm
125-150mm
150-175mm
175-200mm
200-225mm
225-250mm
250-275mm
275-300mm
MT80-193-101*
MT80-193-103*
MT80-193-104*
MT80-193-106*
MT80-193-107*
MT80-193-108*
MT80-193-109*
MT80-193-110*
MT80-193-131*
MT80-193-132*
Range
Order No.
Price
MT80-193-211
0-1"
$Price
MT80-193-212
1-2"
Price
MT80-193-213
2-3"
Price
MT80-193-214
3-4"
Price
MT80-193-215
4-5"
Price
MT80-193-216
5-6"
Price
MT80-193-217
6-7"
Price
MT80-193-418
7-8"
Price
Range
Order No.
MT80-193-219
8-9"
Price
MT80-193-111
0-25mm
MT80-193-112
25-50mm
MT80-193-220
9-10"
Price
MT80-193-114
75-100mm
MT80-193-221
10-11"
Price
MT80-193-222*
11-12"
Price
Note: 0-1" and 1-2" models have Friction Thimble. All others have Ratchet Thimble.
Price
$Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
$Price
Price
Price
Digital Micrometer Sets
Range
Order No.
0-3"
0-6"
MT80-193-923
MT80-193-925
Price
$ Price
Price
Range
Order No.
0-75mm
150-300mm
MT80-193-901
MT80-193-905*
Price
$ Price
Price
Range
Order No.
Price
0-75mm
MT80-193-915
$Price
Starrett No.
Thimble
Face
Order No.
216RL-1
216FL-1
Ratchet
Friction
Steel
Steel
MV70-55953
MV70-55954
Price
$Price
Price
Starrett No.
Thimble
Face
Order No.
T216XRL-1
T216XFL-1
Ratchet
Friction
Carbide
Carbide
MV70-55959
MV70-55960
Price
$Price
Price
with Standard Letter of Certification
Starrett No.
Thimble
Face
Order No.
T216XRL-1
T216XFL-1
Ratchet
Friction
Carbide
Carbide
MV70-66904
MV70-66903
Price
$Price
Price
Digit Counter
Micrometers
• Carbide tipped measuring faces
• Insulated frames
• Positive locking nut on spindle
• Sizes over 1" supplied with standards
• Complete in case
EZ-Read Digit Micrometers
• Graduation: .0001"
• Insulated steel frames
• Carbide tipped measuring faces
• Also includes wrench and fitted case
• Includes standards on sets and sizes over 1"
Range
Order No.
Price
0-1"
1-2"
2-3"
0-3" set
NA55-52222201
NA55-52222202
NA55-52222203
NA55-52222233
$ Price
Price
Price
Price
Range
Graduation
Order No.
Price
0-1"
1-2"
2-3"
0-3" set
0-75mm set
.0001"
.0001"
.0001"
.0001"
.01mm
NA55-52224001
NA55-52224002
NA55-52224003
NA55-52224103
NA55-52224220
$Price
Price
Price
Price
Price
Range
Micromaster Digital Micrometers
A sleek, ergonomic design and plenty of impressive features give the
Micromaster Digital Micrometer a comfortable advantage in both form and function.
• Large, easy-to-read 1/4" digital display
• Preset absolute and differential modes
• Battery life of 1 to 2 years of normal usage
• Automatic shut-off after 10 minutes
• Meets or exceeds applicable Federal and DIN standards
• Complete with shop-hardened, fitted case
Electronic Micrometers
• Limits mode
• Friction thimble spindle lock
• High-low limit settings
• LCD readout, auto shutoff
• Error and out-of-tolerance displays
• Zero setting inch/mm conversion
• SPC output
Range
Resolution
Starrett No.
Order No.
Price
0-1"/ 0-25mm
.00005"/ 0.001mm
733XFL-1
MV70-64239
$Price
With Standard Letter of Certification
Range
Resolution
Starrett No.
Order No.
Price
0-1"/ 0-25mm
.00005"/ 0.001mm
733XFL-1
MV70-66905
$Price
B&S No.
Range
Accuracy
Order No.
599-100
599-125
599-126
599-127
0-1.2"/0-30mm
0-1.2"/0-30mm
1-2"/25-50mm
2-3"/50-75mm
.00016"
.00016"
.0002"
.0002"
MV45-27266
MV45-27271
MV45-27272
MV45-27273
Price
$Price
Price
Price
Price
Note: 599-125, 126 and 127 are EP54 Compliant
3"- 12" ranges are also available. RS232 Models available.
P-697
Depth Micrometers
Depth Micrometer
with 2" Half Base
Depth Micrometers
• Ratchet thimble
• Lock nut
• Carrying case • Satin-chrome finish on
sleeve and thimble
• Lock nut and
ratchet thimble
• Carrying Case
.001 Inch Graduation — Plain
Range
Starrett No.
Base Length
Rod Diameter
Order No.
0 - 3"
0 - 6"
440Z3L
440Z6L
2-1/2"
2-1/2"
1/8"
1/8"
MV70-52113
MV70-52117
440Z3RL
445AZ3RL
445BZ3RL
440Z6RL
445AZ6RL
445BZ6RL
445DZ6RL
445AZ9RL
445BZ9RL
445DZ9RL
-
3"
3"
3"
6"
6"
6"
6"
9"
9"
9"
Base Length Rod Diameter
2-1/2"
3"
4"
2-1/2"
3"
4"
6"
3"
4"
6"
1/8"
5/32"
5/32"
1/8"
5/32"
5/32"
5/32"
5/32"
5/32"
5/32"
Order No.
MV70-52115
MV70-52208
MV70-52220
MV70-52119
MV70-52212
MV70-52224
MV70-52248
MV70-52216
MV70-52228
MV70-52252
Starrett No.
Order No.
0 - 6"
0 - 9"
443Z6RL
443Z9RL
MV70-52173
MV70-52175
Price
$Price
Price
$Price
Price
Individual Replacement Rods
for Depth Micrometers
Price
$Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Rods for 449 Series Depth Gages
Range
0
1
2
3
4
5
Starrett No.
Order No.
Price
99115
99116
99117
99118
99119
99120
MV70-71838
MV70-71839
MV70-71840
MV70-71841
MV70-71842
MV70-71843
$Price
Price
Price
Price
Price
Price
1"
2"
3"
4"
5"
6"
Rods for 440 Series Depth Gages
Range
0
1
2
3
4
5
6
7
8
Depth Micrometers with
Non-Rotating Blades
• Satin-chrome finish on
sleeve and thimble
• Lock nut
• Carrying case
• Combination ratchet and speeder
• Blade dimension
.045 thick × 1/8" wide
-
-
Starrett No.
Order No.
Price
99331
99332
99333
99334
99335
99336
99337
99338
99339
MV70-71973
MV70-71974
MV70-71975
MV70-71976
MV70-71977
MV70-71978
MV70-71979
MV70-71980
MV70-71981
$ Price
Price
Price
Price
Price
Price
Price
Price
Price
1"
2"
3"
4"
5"
6"
7"
8"
9"
Rods for 443 & 445 Series Depth Gages
Range
0
1
2
3
4
5
6
7
8
Range
Starrett No.
Base Size
Order No.
0 - 3"
0 - 6"
0 - 6"
449AZ3R
449AZ6R
449BZ6R
2-1/2"
2-1/2"
4"
MV70-52318
MV70-52320
MV70-52324
Price
$Price
Price
Price
Micrometer Depth Gages
• 1/8 Measuring rods
• Friction thimble
• Ring lock
-
Starrett No.
Order No.
Price
99341
99342
99343
99344
99345
99346
99347
99348
99349
MV70-71982
MV70-71983
MV70-71984
MV70-71985
MV70-71986
MV70-71987
MV70-71988
MV70-71989
MV70-71990
$ Price
Price
Price
Price
Price
Price
Price
Price
Price
1"
2"
3"
4"
5"
6"
7"
8"
9"
Depth Micrometers
• Precision ground base
• Ratchet thimble
• Fitted case and adjusting wrench
Bottom Change Rod
Range
Base Size
Order No.
Price
0 - 4"
0 - 6"
2-1/2"
4"
NB60-DM042
NB60-DM064
$Price
Price
Range
Base Length
Order No.
0-6"
0-6"
0-12"
2.5"
4"
4"
MV45-25625
MV45-25628
MV45-25629
Metric sizes available.
P-710
Price
$Price
Price
Price
Top Change Rod
Range
Graduation
No. of Rods
Base Length
Order No.
Price
0-4"
0-6"
.001"
.001"
4
6
2-1/2"
4"
NB60-DMT042
NB60-DMT064
$Price
Price
Starrett No.
0
0
0
0
0
0
0
0
0
0
Range
Price
.001 Inch Graduation — Ratchet Thimble
Range
G-4
Electronic Calipers
EURO-CAL
IP-67 S_Cal Pro
6" Electronic Caliper
6" Electronic Caliper
• Water Resistant to IP54!
• Reads in Inch, Metric & Fractions!
• Unique Full-Size Decimal Characters!†
•Range: 6"/150mm
•Reads in inch, metric & fractions.
•Resolution: .0005"/.01mm
(fractions in 1/64th increments)
•Direct inch/metric/fraction conversion
•Absolute incremental measurement
•Water resistant to IP54 standards.
•Stainless steel frame
•4-way measuring
•RS232 output
•Includes molded plastic case.
Order No. NA55-541003301 •
• $Price
$Price
† On our competitor's fractional calipers the characters following the decimal point are not full size.
Snap Cal
Quick Mini Snap Calipers
The Quick Mini is a convenient snap-action pocket thickness gage offering LCD digital readout.
Description
Order No.
.5" Quick Mini
1" Quick Mini
MT80-700-118
MT80-700-122
Ideal for measuring a wide range of
materials from metal, plastics and
glass to small wires, fibers and paper.
Features:
• Range: 0-1.25" (31.5mm)
• Resolution: .0005" (.01mm)
• Spring-loaded travel
• Wide faced flat jaw for easy positioning
• Dimension of fixed jaw: .470" × .900"
• Accuracy: .001" (.02mm)
• Hardened stainless steel construction
• Direct inch/metric conversion
• Measuring speed of 60"/second
• Large, high contrast LCD display
• Hanging loop included for attachment to belt or chain
Price
$Price
Price
Description
Order No.
Price
NA55-54550000
$Price
Economy Snap Cal (includes fitted case)
NA55-54550300
Price
1m Cable
Order No. MT80-905338
$Price
Shown with rugged,
saddle leather holster
Snap Cal (includes rugged, saddle leather holster)
Electronic Special Jaw Calipers
BLADE TYPE
•
•
•
•
• IP-67 rating coolant proof
• Smart inductive sensor
• 6"/150mm, 4 way measuring
• Resolution: .0005"/.01mm
• Accuracy: .01"/.02mm
• S_Connect Proximity - USB/RS232/wireless
• Includes case
Order No. NA55-54100067
G-5
IV
NECK TYPE
PC Output
S
On/Zero/Off Button
Inch/Metric conversion
Data Hold
2m Cable
Order No. MT80-905409
$Price
LOW PRESSURE TYPE
Range
Type
Measurements
Order No.
Price
0-6"/0-150mm
0-6"/0-150mm
Blade
Neck
Narrow OD,
ID, Depth, Step
Recessed OD
MT80-573-234-10
MT80-573-251-10
$Price
0-7"/0-180mm
Low
Pressure
50-100 gms
OD of Resilient
workplace
MT80-573-291-10
Price
Price
P-715
Electronic Calipers
G-6
Ultra-Cal Mark IV Water Resistant
Electronic Caliper
Poly-Cal 6"/150mm
™
Electronic Caliper
Inch/Metric/Fraction
• Water resistant
• 4 way measuring
• Resolution: .0005"/.01mm
• Repeatability: .0005"/.01mm
• Direct Inch/Metric conversion
• Accuracy for 6" model: .001"/.02mm
• Accuracy for 12" models: .0015"/.03mm
• Large easy to read LCD display
• Direct RS232 output
• Includes shop-hardened case
Polycarbonate Caliper
Includes
• Fractional Measurement
• Easy-To-Read Display
• Lightweight
• Range 6"/150mm
• Large easy-to-read display.
• 4 way measuring.
• Resolution .0005"/.01mm,
fractions by 1/64 increments.
• Accuracy +/-.008"
Range
Order No.
0-6"/150mm
0-8"/200mm
0-12"/300mm
NA55-54100444
NA55-54100448
NA55-54100412
• Supplied with vinyl pouch.
$Price
Water Resistant IP54
Electronic Caliper
• Stainless steel frame.
• Large easy-to-read display.
• Direct inch/metric conversion.
• Absolute/incremental
measurement
• 4 way measuring.
• Complete in case.
Large Easy-To-Read LCD Display • Patented Ceramic Chip
Description
• Water resistant to IP54 specifications
• Patented ceramic capacitive
sensor
• Stainless steel frame
• Direct Inch/Metric conversion
$Price
Price
Price
Electronic Caliper
• Absolute/Incremental
Measurement.
Order No. NA55-54101175 •
Price
• Resolution: .0005"/.01mm
• Large easy to read LCD display
• 4-way measurement
• Includes molded case
Range
Order No.
0-6"/150mm
0-12"/300mm
NA55-54100777
NA55-54100712
0-6"/150mm Xtra-Value Cal
w/ Super Large Display
Also available with a
Super Large Display!
Order No.
$Price
Price
NA55-541016001
Price
Pro-Max Electronic Caliper
3 Year
Warranty
Price
$Price
Price
Electronic Calipers
Price
NA55-541011501
NA55-541013001
• Polycarbonate Frame.
• Direct inch/metric/fraction
conversion.
• 4-way measurement, inside,
outside, depth and step
• Hardened stainless steel construction
• Direct RS-232C output
• Includes molded case
Range
Order No.
0-6"/150mm
0-8"/200mm
NA55-54200777
NA55-54200888
Price
$Price
Price
Computer Connect Kit
• Patented ceramic capacitive sensor
• Large easy-to-read display
• Includes shop-hardened case
Range
Order No.
Price
0-4"/100mm
0-6"/150mm
0-8"/200mm
0-12"/300mm
NA55-54100004
NA55-54100000
NA55-54100008
NA55-54100112
$ Price
Price
Price
Price
P-716
Connect Kit #54-115-333
Used with products that feature Direct RS232C output allowing connection of tool
to any computer or printer without the need of an interface. Kit includes 80" (2m)
connecting cable with 9 pin IBM compatible, 9/25 pin adaptor, support disk and
instructions.
Description
Half Duplex Computer Kit
Footswitch (requires 54-115-334)
Order No.
NA55-54115333
NA55-54115336
NA55-54618165
Price
$Price
Price
Price
Dial Calipers
Dial Calipers
Stainless Steel Dial Calipers
• Extra-rigid (3.4mm thick) main beam
• Extra-large dial face
• Hardened stainless steel
• 4-Way measurements
• Easy zero point re-adjustment with adjuster supplied
• Range per revolution .001" inch
• Covered rack for longer caliper life, keeps chips out
• Measuring face hardened
stainless, ground and lapped
• Complete with fitted case
Range
Order No.
0-4"
0-6"
0-8"
0-12"
NB60-CDC4
NB60-CDC6
NB60-CDC8
NB60-CDC12
G-7
• Supplied with fitted carrying case
• Improved durability, the sliding surface of the main blade is coated
with TiN 4", 6", & 8" model
Price
$Price
Price
Price
Price
MT80-505-675 • $Price
.001" With Carbide Jaw
Range
Order No.
Price
0-6"
NB60-CDC6CJ
$Price
Range
Order No.
Price
0-6"/
0-150mm
NB60-CDC6EM†
$Price
†Metric on scale only
6" Black Face Dial Caliper
Range
0
0
0
0
0
0
0
0
0
0
-
4"
6"
6"
6"
6"
6"
8"
8"
12"
12"
Range
per/Rev.
Depth
of Jaws
.200"
.100"
.200"
.200"
.100"
.100"
.200"
.100"
.200"
.100"
1-9/16"
1-9/16"
1-9/16"
1-9/16"
1-9/16"
1-9/16"
1-15/16"
1-15/16"
2-1/2"
2-1/2"
Order No.
MT80-505-716
MT80-505-675
MT80-505-717
MT80-505-718†
MT80-505-708†
MT80-505-712††
MT80-505-719
MT80-505-676
MT80-505-720
MT80-505-677
Price
$Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Range
Order No.
Price
0-6"
NB60-CDC6B
$Price
Dual Reading Inch/Metric Dial Caliper
.001 Inch/0.02 Metric Graduation
Range
Order No.
0-6"/0.150mm NB60-CDC6M2
Price
$Price
Range
Range
per/Rev.
Depth
of Jaws
Order No.
0-150mm
0-200mm
2mm
2mm
40mm
50mm
MT80-505-671
MT80-505-672
Price
$Price
Price
Range
Range
per/Rev.
Depth
of Jaws
Order No.
0-100mm
0-150mm
0-200mm
5mm
5mm
5mm
40mm
40mm
50mm
MT80-505-636-50*
MT80-505-633-50*
MT80-505-634-50*
Price
$Price
Price
Price
†With carbide outside jaws ††With carbide inside & outside jaws
.001 Inch Graduation with Inch /
Metric Rack
Metric Dial Caliper
.02 Metric Graduation
Shockproof Dial Calipers
Range
Order No.
Price
0-150mm
NB60-CDC6M1
$Price
18" Heavy Duty Dial Caliper
• .001" Graduation
• 0-100 Dial Reading
• 3"-1/8" Deep Jaws
• Inside and outside measurement
on one set of jaws
• Covered rack
• Depth measuring rod
Order No. NB60-CDC18
$Price
• Covered rack
• Inside, outside, step & depth measurement
• Hardened stainless steel rack
• Supplied in shop-hardened case
• Tough, shockproof design
• .100" per revolution
• .001" dial graduations
Range
Dial Face
Order No.
Price
0-4"
0-4"
0-6"
0-6"
0-8"
0-12"
White
Black
White
Black
White
White
NA55-52008704
NA55-52008714
NA55-52008706
NA55-52008707
NA55-52008708
NA55-52008712
$Price
Price
Price
Price
Price
Price
P-719
Vernier & Dial Calipers
G-8
Heavy Duty Vernier Calipers
4" Pocket-Cal
Vernier Caliper
• Ground and lapped for accuracy
• Satin chrome finished scale surface
• Satin chrome finished stainless steel
• Dial graduation .001"
• Includes handy case
• Three-way measurement
– inside, outside and depth
• Easy wear adjustment of vernier scales
• Nib style jaws and fine adjustment
Order No. NA55-52057004 • $Price Each
Master Vernier Calipers
• Wide space graduation
• Lock nut
• Screw-type adjusting nut
• Complete with fitted case
Depth
of Jaw
Order No.
0-12"
0-18"
0-24"
0-40"
0-60"
0-80"
3-1/2"
4"
4"
5-1/2"
7"
7"
MT80-160-124
MT80-160-116
MT80-160-102
MT80-160-105
MT80-160-111
MT80-160-114
Price
$ Price
Price
Price
Price
Price
Price
Range
Bar Width
Starrett No.
Order No.
0-6"
0-12"
0-24"
11/16"
15/16"
15/16"
123Z-6
123Z-12
123Z-24
MV70-50524
MV70-50526
MV70-50528
Price
$Price
Price
Price
.001 Inch Graduation With Standard Letter of Certification
Range
Bar Width
Starrett No.
Order No.
0-6"
0-12"
11/16"
15/16"
123Z-6
123Z-12
MV70-66925
MV70-66927
• Easy-to-read Vernier scales
$Price
Price
• Long jaws and fine adjustment
• Accuracy meets U.S. Federal specifications
Depth
of Jaw
Order No.
0-12"/0-300mm
0-18"/0-450mm
0-24"/0-600mm
3"
4"
4"
MT80-160-125
MT80-160-119
MT80-160-103
Price
$Price
Price
Price
Price
Stainless Steel Heavy Duty
Vernier Calipers
Range
Range
Depth
of Jaw
Order No.
Price
0-1500mm
180mm
MT80-160-110
$Price
Heavy Duty
Vernier Calipers
• Open face design
• Ground and lapped
• Easy-to-read vernier scales
• Long jaws and fine adjustment
• Meets all Federal specifications
Range
Range
Depth of Jaw
Order No.
24"
40"
4"
5-1/2"
NB60-HK24S*
NB60-HK40S*
Price
$Price
Price
*Available while supplies last
Master Vernier Calipers
Range
Depth
of Jaw
Order No.
Price
12"
18"
24"
40"
60"
2.9
3.50
3.20
4.75
7.75
NB60-HK12C
NB60-HK18C
NB60-HK24C
NB60-HK40C
NB60-HK60C
$ Price
Price
Price
Price
Price
Plastic Dial Caliper
• Machine engraved from master • Satin chrome finish for glare
free reading
• Slide type fine adjust thumbwheel
• Graduation: .001" / .02mm
• Nib design measures both
• Price includes fitted case
inside & outside dimensions
Range
Order No.
12" / 300mm
24" / 600mm
40" / 1000mm
60" / 1500mm
NA55-52085012
NA55-52085024
NA55-52085040
NA55-52085060
Price
$ Price
Price
Price
Price
•
•
•
•
•
Fractional conversion table
Plastic case
4-Way measuring
Friction roller
Reinforced plastic gives precision capabilities at an economical price
• Graduated in .01 and 64ths with inch and mm on bar scale
Range
Order No.
Price
0-6"
NE50-142
$Price
P-721
Caliper Accessories
G-9
Caliper Extender Attachment
Accessories
Description
An economical attachment to extend
the range of your 6" caliper.
Description
26"
36"
51"
71"
91"
Extension
Extension
Extension
Extension
Extension
Order No.
Kit
Kit
Kit
Kit
Kit
Order No.
Price
1/2" Projections Pins (Pair)
NB75-Z252610
$Price
1" Projection Pins (Pair)
NB75-Z252611
Price
1-1/2" Projection Pins (Pair)
NB75-Z252612
Price
Layout Kit (2 Pc.)
NB75-Z2526LK
Price
Centerline Gage Pins (Pair)
NB75-Z2526CG
Price
Price
NB75-Z2526
NB75-Z2536
NB75-Z2551
NB75-Z2571
NB75-Z2591
$Price
Price
Price
Price
Price
A must accessory for every Micrometer. Each Anvil is 1/2" long.
Comes with reinforced holding boot, and will fit on any 1-12" Micrometer.
All Anvils are hardened Steel with Black Oxide plating.
Fits .235 and .250 spindle diameters.
NEW!
Use our Mic
Anvils on your
4-6-8" Calipers
Individual
Anvil Type
Specifications
Order No.
Price
Super Spline
Spline
Blade
Disc
Knife
Comparator
.050" face
.100" face
.300" thick
.500" face
30 degrees
30 degrees
NB75-Z9303
NB75-Z9304
NB75-Z9306
NB75-Z9305
NB75-Z9301
NB75-Z9302
$Price
Price
Price
Price
Price
Price
KALMASTER Caliper Masters
Caliper Jaw attachment is fastened to your Caliper Jaw,
and the Mic Anvil fits onto the Jaw Attachment
Order No. NB75-Z9050
$Price
Individual Micrometer/Caliper Anvil Attachments
6" Caliper Master
12" Caliper Master
12 Settings for checking inside
and outside jaws and jaw frames.
All calibrations are accurate to
± .0001". Durable wood storage
case included.
24 Settings for checking over a 12"
range. 0.6" range accurate to ±.0001",
7-12" range accurate to ±.0002".
Durable wood storage case included.
Order No. MS81-K1
Order No. MS81-K2
$Price
$Price
Available with certificate calibration—call for price.
1" Micrometer and 6" Caliper Cases
Fit most calipers and micrometers.
Style and color may vary.
0-6" Caliper Case
Order No. NB60-6ECC* • $Price
P-723
Dial Indicators
G - 10
Dial Indicator ANSI Group 0
Series A
Miniature Dial Indicators
• 7/32" Diameter stem
• Low friction movement
• Adjustable bezel
• Balanced dial
• 1-17/64" Diameter dial face
• Where available space prohibits the
use of a larger dial indicator
• Dial approximately 1-7/32" diameter
• Lug back
• 7/32" diameter stem
Range
Stem Reading
Graduation
Order No.
.050"
.100"
.0005"
.001"
0-10-0
0-20-0
MV70-55892
MV70-55893
Price
$Price
Price
AGD 1 Dial Indicators
with Certification
Grad.
Range
Per Rev.
Dial
Style
Order No.
.025
.075
.125
.250
.0001
.0005
.001
.001
.010
.030
.050
.100
0-5-0
0-15-0
0-25-0
0-100
MV65-10251BJ
MV65-10753B
MV65-11254B
MV65-12504B
Price
$Price
Price
Price
Price
Range
per/Rev.
Dial
Face
.0001"
.0005"
.0005"
.0005"
.0005"
.0005"
.0005"
.0005"
.001"
.001"
.001"
.001"
.001"
0.002mm
0.01mm
0.01mm
0.01mm
0.01mm
0.02mm
0.02mm
.025"
.050"
.050"
.075"
.075"
.100"
.100"
.125"
.125"
.125"
.125"
.250"
.250"
0.5mm
2.5mm
2.5mm
5mm
5mm
2.5mm
2.5mm
.010"
.020"
.020"
.030"
.030"
.040"
.040"
.050"
.050"
.050"
.050"
.100"
.100"
0.2mm
1mm
1mm
1mm
1mm
0.5mm
0.5mm
0-5-0
0-20
0-10-0
0-30
0-15-0
0-40
0-20-0
0-50
0-25-0
0-50
0-25-0
0-100
0-50-0
0-10-0
0-100
0-50-0
0-100
0-50-0
0-250
0-125-0
P-726
Price
.0001
.0001
.0005
.001
0-2-0
0-5-0
0-10-0
0-20-0
NA65-A12Q
NA65-A2I
NA65-A3Q
NA65-A6Q
$Price
Price
Price
Price
• 1/4" Range
• 0-100 Reading
• Lug back
• Revolution counter
• AGD 1 Style
Order No. NB70-NDI6 • $Price
• 0.01mm/.0005" Readings
• 3mm/.120" Measuring range
• 8mm Shank diameter
• 1-3/8" Dial diameter
• Ball type contact point
Total
Range
Order No.
.010
.025
.050
.100
Small Shockproof
Dial Indicators
Series 1 Dial Indicators
Grad.
Dial
Style
Dial Indicator
Total
Range
• 1-5/8" Diameter face
• Vertically mounted
lug on center back
Grad.
• Made in America since 1932
• One piece brass forged and chrome
plated case
• Heat treated 416 stainless steel rack & gears
Included with each indicator:
• 4-position lug & flat back
• Long form cert., traceable to NIST
Measuring
Range
Note
Jeweled
Jeweled
Jeweled
Back Plunger
Back Plunger
Order No.
MT80-1803F-10
MT80-1470F
MT80-1471F
MT80-1570F-10
MT80-1571F-10
MT80-1670F
MT80-1671F
MT80-1506F
MT80-1507F
MT80-1780F
MT80-1781F
MT80-1410F
MT80-1411F
MT80-1011F-11
MT80-1230F-01
MT80-1231F-01
MT80-1044F-01
MT80-1045F-01
MT80-1158
MT80-1159
Price
$Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Metric (3mm range)
Inch (.120" range)
• 1-5/8" Diameter dial face
• Shockless hardened steel gear train
• Lug-on-center back
• Jewel bearing
Graduation
.0001"
.001"
Dial
Reading
0-50-0
0-25-0
0-50-0
0-100
Range
One Rev.
Total
.010"
.050"
.100"
.025"
.125"
.250"
Jewel Bearings
Order No.
Price
MV70-53378
MV70-53410
MV70-53400
MV70-53428
$Price
Price
Price
Price
Dial Indicators
G - 11
2-1/4" Dial Diameter
• Lug back
• Lug back
No. 2 Series – 2-1/4" Face Diameter
Graduation
.0005"
.001"
Dial
Reading
0-50
0-50
0-100
0-50-0
0-100
Range
One Rev.
Total
.100"
.500"
1.000"
.500"
.100"
1.000"
.050"
Order No.
MV70-53292
MV70-53304
MV70-53293
MV70-53287
MV70-53295
Price
$Price
Price
Price
Price
Price
Graduation
.001"
Dial
Reading
0-100
0-100
Range
One Rev.
Total
—
—
—
—
Order No.
MV70-66864
MV70-66863
Price
$Price
Price
No. 2 Series – 57mm Face Diameter
Graduation
0.01mm
Dial
Reading
0-50-0
0-100
Range
One Rev.
Total
1.0mm
25mm
Order No.
MV70-53305
MV70-53307
Price
$Price
Price
Long Range Dial Indicators
Shockless Hardened Steel Gear Train
• .001" Dial graduation
• 0.100" Dial reading
• Conforms to AGD specifications
except for range
• Stem cap supplied as standard
• Furnished with continuous reading
double dial with direct reading count
hands
• Furnished with jewel bearings and lug-on-center back
Range
One Rev.
0-100
0-100
0-50-0
0-100
0-100
0-100
0-50-0
Range
Diameter
Order No.
2.000"
2.000"
3.000"
4.000"
5.000"
5.000"
2
3
2
2
2
3
2-1/4"
2-3/4"
2-1/4"
2-1/4"
2-1/4"
2-3/4"
MV70-53309
MV70-53619
MV70-53310
MV70-53311
MV70-53312
MV70-53622
Price
$Price
Price
Price
Price
Price
Price
0-100
0-50-0
0-100
0-100
0-100
0-50-0
0-100
.001"
0-100
.100"
.100"
.500"
.100"
.500"
1mm
1mm
1mm
1mm
MT80-2410F
MT80-2410F-60
MT80-2411F
MT80-2412F
MT80-2414F
MT80-2414F-10
MT80-2415F
Price
$Price
Price
Price
Price
Price
Price
Price
Note
Order No.
2.5mm
—
—
5mm Waterproof w/rev.counter
With reverse counter
10mm Jeweled w/rev. counter
20mm
MT80-2230F-01
MT80-2231F-01
MT80-2044F-61
MT80-2046F-01
MT80-2046F-11
MT80-2047F-01
MT80-2050F-01
Price
$Price
Price
Price
Price
Price
Price
Price
AGD 2 Long Range Dial Indicators
Total
Range
Range
per /Rev.
Grad.
1.000" .0005"
1.000" .001"
1.000" .001"
1.000" .001"
1.000" .001"
2.000" .001" .050"
.100"
.100"
.100"
.100"
.100"
1.000"
.100"
.001"
Dial
Face
Note
With Lug Back
0-50
w/Rev. Counter
0-100 w/Rev. Counter
0-50-0 w/Rev. Counter
With Flat Back
Order No.
MT80-2776F
MT80-2416F
MT80-2416F-10
MT80-2417F
MT80-2904F
MT80-2424-10
Price
$Price
Price
Price
Price
Price
Price
MT80-2416FB-10 $Price
• Lug back
.001"
Dial
Reading
.250"
Order No.
—
Waterproof
—
—
—
Jewel Bearings
—
Range
Dial
Reading One Rev. Total
Graduation
• Lug back
Graduation
.100"
Note
No. 2 Series – 57mm Face Diameter 0.01 Metric Graduation
.0001"
Range
One Rev.
Total
AGD
Group
P-728
Dial
Reading
Dial
Reading
0-10-0
0-20
0-50-0
0-100
0-50-0
0-100
Range
One Rev.
Total
.020"
.400"
.100"
.500"
.100"
1.000"
Order No.
MV70-53793
MV70-53797
MV70-53783
MV70-53787
MV70-53785
MV70-53789
Price
$Price
Price
Price
Price
Price
Price
No. 4 Series – 92mm Face Diameter
Total
Order No.
Price
1.000"
MV70-53613
$Price
No. 2 Series – 2-1/4" Face Diameter with Standard Letter
of Certification
No. 2 Series – 2-1/4" Face Diameter .001 Inch Graduation
Graduation
Dial
Reading
Range
One Rev.
Total
Order No.
Price
0.01mm
0-100
1.0mm
25mm
MV70-56234
$Price
Dial Indicators
Dial Indicators
Indicator
• AGD Group 2, 2-1/4" Dial diameter
• Lug back
Protection includes:
• Rubber bellows on stem
• O-Ring seal on safety cap
• Redesigned bezel with double o-ring
protection for bezel and rotating dial
• Form-fitted back plate
• Corrosion resistant
COOLANT PROOF,
• 8mm stem
SHOCKPROOF and
• M2.5 contact point
AFFORDABLE
General Specifications include:
• Lugback
• Robust, shockproof design
52-530-110 Special Features:
• Dial face reads in inch (black) or metric (red)
• Separated dial for Inch and Metric
NA55-52530110
NA55-52520444
Range
AGD Group
Reading
Order No.
.0005"
.125"
1
0-20-0
NA55-52520020
$Price
Price
.0005"
.40"
2
0-50-0
NA55-52520250
Price
.001"
.40"
2
0-100
NA55-52520444
Price
Grad.
Range
Continuous
Reading
Balanced
Reading
Order No.
Price
.001"
.001"
.0005"
.0005"
.0005"
.0001"
1.00"
.200"
.250"
.250"
1.00"
.500"
0-100
0-100
0-50
–
0-50
0-10
–
0-50-0
0-25-0
0-25-0
–
–
NA55-52520110
NA55-52520120
NA55-52520125
NA55-52520127
NA55-52520128
NA55-52520140
$ Price
Price
Price
Price
Price
Price
.001"
.01mm
1"
25mm
0-100
–
–
0-100-0
NA55-52530110
Price
Order No. NA55-525201101
$Price
White Face
Order No. NA55-525201102
$Price
• Most widely used for all dial indicator
applications
• Dial approximately 2-1/4" diameter with
soft-green tint
• Furnished with continuous dial, lug back,
revolution counter and tolerance hands
• Stem diameter: 3/8"
Measuring
Range
Grad.
Dial
Style
Range
Per Rev.
Order No.
.020
.025
.050
.075
.100
.125
.050
.100
.125
.250
.0001
.0001
.0005
.0005
.0005
.0005
.001
.001
.001
.001
0-8
0-10
0-20
0-30
0-40
0-50
0-20
0-40
0-50
0-100
.008"
.010"
.020"
.030"
.040"
.050"
.020"
.040"
.050"
0-100"
NA65-C1KRC
NA65-2014761
NA65-2014810
NA65-2014811
NA65-2014812
NA65-2014814
NA65-2014809
NA65-2014813
NA65-2014815
NA65-2011049
Dial Indicators
Waterproof and Oil-Proof Version
Metric Long-Range
Order No. NA65-4321100*
$Price
P-730
Price
$Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
with metal bezel
• 0.01mm (metric)/.0005" (inch) Readings
• 10mm/.400" Measuring range
• 8mm Shank diameter
• 2-1/4" Dial diameter
Inch/Metric
Dial Indicators ANSI/AGD
Group 2 Mahr Federal Series C
Premium Dial Indicator
Black Face
NA55-52520110
• 3/8" Mounting stem
• 4-48 Contact threads
• Accuracy meets or exceeds ANSI specifications
• Lugback included
• High precision movement
Range
Dial
Order No.
Price
0.50"
0.50"
0.125"
0.125"
0-50-0
0-100
0-25-0
0-50
NA65-4319921*
NA65-4319920*
NA65-4319911*
NA65-4319910*
$Price
Price
Price
Price
Graduation
• Popular AGD 2 series
• Jet console-black dial face with orange hand
• Range 0-1"
• 0-100 continuous reading
• .001" graduations
• Solid brass housing
• Carbide contact point
• Includes certificate of calibration
G - 12
Electronic Indicators
G - 13
Digital Dial Indicator
Millitast
Electronic Digital Indicator
• AGD Group 2
• .0005 Resolution – 1″ range
• Instant Metric /English Conversion
• Battery powered
• Preset for +/– reading
• Face rotates 280°
• Large multi-function display with decimal point, minus sign, “mm” or “inch”
and selected function
• Values entered remain stored even when
switched off
Order No. MV70-65593 • $Price
• Data output. Connection of Computer
Equipment 2 ES and PC for data logging and processing
Call For Correct Cable Number
For Your Data System
Starrett No.
Description
Order No.
26001
26004
.0005 Indicator Without Output
.0005 Indicator Full Function
MV70-64886
MV70-64889
Price
$Price
Price
• Interface not required. Optoelectronic data transmission permits
direct connection
Plus Series have the same
features as Basic in addition
to the following:
• Minimum reading hold
• Hold button to freeze display
• Preset mode
• Floating reference
• Tolerancing
• T.I.R. Display
• Feature lock
Unique user-selectable resolution feature up to 10 resolutions available in one indicator. (Max. res. listed)
Basic Series:
• Instant inch/mm conversion
• Maximum reading hold
• Zero tool at any spindle position
• Rotating bezel
• Auto off after 10 minutes of non-use
• Three power sources
• Multiple data output/input choices
Electronic Indicator
No. 3600 Series
Features:
• Range: 0/.500″ / 0/12.7mm
• AGD group 2 size
• Resolution: .0005″ or .01mm
• Power On/Off button
• Reverse travel (±control indicates direction)
• Zero setting at any position
• Lug-on-center back plus additional flat back
• Dust cap
WISDOM™ Basic Series
Range
Max. Resolution
Order No.
Price
1″/25mm
.00005″/.001mm
MV70-65819
$Price
WISDOM™ Plus Series
Range
Max. Resolution
Order No.
.600″/15mm *
1″/25mm
2″/50mm
100mm
.0001″/.002mm
.00005″/.001mm
.0001″/.002mm
.0001″/.002mm
MV70-65836
MV70-65839
MV70-65844
MV70-65847
Order No.
Selectable resolution 0.001mm/.0005
NA65-4336201*
(.5″) 12.5 mm
Selectable resolution 0.01mm/.0005
NA65-4336206*
(1″) 25 mm
NA65-4336207*
(2″) 50 mm
Price
$ Price
Price
Price
Price
Price
$Price
Price
Price
Measuring Range
WISDOM™
Electronic Digital Indicators
Order No. MV70-68813
$Price
*8 Resolutions
DIGICO™ 12
Electronic Mini-Dial Gages
IP65 compliant–Made to measure in extreme
workshop conditions. Water and coolant resistant.
Features and Specifications:
• 1.73 in./44mm diameter dial
• IP65 compliant–Water and coolant resistant
• RS-232 data output combined with external power
supply
• Patented inductive measuring system
Range
Graduation
• Choice between absolute "ABS" and relative
"REL" measuring modes
• Numerical display
• PRESET function
• Switchable measuring direction
• Automatic shut down
Output
IP65†
Order No.
Price
MV40-29017
0.0005/0.01″
without SPC
$Price
0.00005″ or 0.0005/0.001″ MV40-29018
0.5″/12.5mm
with SPC
Price
or 0.01″
† With electronic module protected against the penetration of liquids †† With both mechanics and electronics protected against the penetration of liquids
0.5″/12.5mm
IP65††
Order No.
Price
MV40-28885
$Price
MV40-28884
Price
P-733
Back Plunger and Electronic Indicators
G - 14
Back Plunger Dial Test Indicator
Back Plunger Dial Indicators
No. 650 Series With Deep Hole Attachment
The Series No. 651 is identical to the
No. 650 Series except they cannot
accept the deep hole attachment.
• 1-11/16" Diameter bezel
• Adjustable dials
• Indicator mounting rod measures
1/4" diameter × 3-3/16" long
• Back plunger stem is
AGD 3/8" diameter × 5/8" long
0-50-0
0-100
Dial
Reading
Order No.
.200"
.200"
.001"
.001"
0-100
0-100
MV70-50697
MV70-50699
Price
$Price
Price
Range
Graduation
Dial
Reading
Order No.
Price
.200"
.001"
0-100
MV70-66865
$Price
Description
Order No.
Indicator with 3 contact points,
detachable deep hole attachment,
and accessory attachments in case
Indicator with 3 contact points,
detachable deep hole attachment,
and 3 accessory attachments in case
Indicator with 3 contact points and
detachable deep hole attachment only
detachable deep hole attachment only
3 accessory attachments in case
Price
MV70-64475
$Price
MV70-64474
Price
MV70-64477
Price
MV70-64476
Price
MV70-64483
Price
Reading
Order No.
0-50-0
0-100
NB73-A51
NB73-A52
Back Plunger
Dial Indicators
Mounting post and hole attachment are on
common axis for quick, accurate centering
Range/ Dial Type
.200 (in two revolutions)
Continuous: 0 – .100
Continuous: 0 – .100
Balanced: 0 – .050-0
Balanced: 0 – .050-0
• .001" and 0.02mm Graduation
• Inch-ANSI standard (Stem Diameter 3/8")
Range
Per Rev.
Dial
Reading
Order No.
.1"
.1"
2.6mm
2.6mm
.1"
.1"
2.6mm
2.6mm
0-100
0-50-0
0-260
0-130-0
MT80-1156
MT80-1157
MT80-1158
MT80-1159
$Price
Price
• 1/4" Shank
• .100" Range
• Accepts direct reading hole attachment
• Screws directly into base — no supporting arms needed
• Reaches into deeper holes
• Jeweled bearings
Back Plunger
with Perpendicular
Mounting Stem
Total
Range
Price
Price
$Price
Price
Price
Price
Grad.
Accessories
Order No.
Price
.001
Three Contact Points
ND50-299B
$Price
.001
Order No. 299 plus
accessories
ND50-299A
Price
.001
Three Contact Points
ND50-399B
Price
.001
Order No. 399 plus
accessories
ND50-399A
Price
0-100
Graduation
Back Plunger Indicators
Dial
Reading
0-50-0
Range
Both the No. 650A and No. 651A set
include the following indicator
accessory attachments: P/N 99437 clamp,
P/N 99438 tool, post holder and
P/N 18718 snug complete in case.
0-100
3 Indicators in One
• 0-100 Dial reading
• 0-.200" Range
• Order No. 196B1 indicator
supplied with Order No. 196E
contact point only
Contact Points
3/16" Diameter
3/8" Diameter
1/2" Diameter
Order No. ND50-299C Order No. ND50-299D Order No. ND50-299E
$Price
$Price
$Price
Electronic Digital Indicators
7 Keys Digital Electronic Indicator
• .0005/.01mm Resolution
• Inch/Metric, Zero setting
• Battery included
• Lugback
0-.400"/0-10mm Range
Order No. NB70-EDI1 • $Price
P-734
1"/25mm Range
Lugback
Order No.
NB70-32731 $Price
• Range: 0-1/2"/ 13mm
• Display: 0.0005"/ 0.01mm
• On/off button
• Absolute button
• Lug back
• Preset, zero set, inch/mm and
tolerance set
• Large LCD screen
• In plastic case
Order No.
NB60-5DI7
$Price
Test Indicators
G - 15
Dial Test Indicators
• Two-way action – no reversing lever
• Carbide contact point
• Ball bearings and jeweled movement
• Extremely low measuring pressure
• Precise repetitive readings
• Easy-to-read tilted dial
• Points are interchangeable between
.0005" and .001" indicators
• Contact point swivels 210°
• Shank diameter – 5/32" .080" diameter ball
Horizontal
1-1/16"
Dial
Horizontal
1" Dial
Vertical
1-1/16" Dial
Vertical
1" Dial
Graduation
Travel
Contact
Length
Dial
Diameter
Ref. No.
Order No.
Horizontal, Short Range
Horizontal, Long Range
Vertical, Short Range
Vertical, Long Range
.0001"
.001"
.0005"
.0005"
.0001"
.001"
.0005"
.0005"
.016"
.060"
.060"
.060"
.016"
.060"
.060"
.060"
11/16"
11/16"
11/16"
11/16"
11/16"
11/16"
11/16"
11/16"
1-1/2"
1"
1"
1-1/2"
1-1/2"
1"
1"
1-1/2"
312B-3
312B-20
312B-2
312B-1
312B-3V
312B-20V
312B-2V
312B-1V
MV40-41680
MV40-41682
MV40-86150
MV40-42775
MV40-41714
MV40-41687
MV40-41686
MV40-41685
TrueTest™ Test Indicators
Each indicator features:
• Smooth spindle movement
Grad.
Range
Dial
per Rev. Range Reading
• Water and dust resistant one-piece black bezel and hard coated crystal
Basic Indicator
Remarks
White Dial
Face
.0005" .03"
.06" 0-15-0 Blue Dial
Face
Black Dial
Face
White Face
.0005" .03"
.06" 0-15-0 Long Point
Black Face
Long Point
White Dial
Face
.0001" .008" .016" 0-4-0
Black Dial
Face
Order No.
MT80-513-442
P-736
Order No.
Price
$Price MT80-513-442T
$Price
Price MT80-513-442T-01
Price
MT80-513-442-06
Price MT80-513-442T-06
Price
MT80-513-446
Price MT80-513-446T
Price
MT80-513-446-06
Price MT80-513-446T-06
Price
MT80-513-443
Price MT80-513-443T
Price
MT80-513-443-06
Price MT80-513-443T-06
Price
Sets Include:
• Dial Test Indicator
• Axial support
• Height gage bar with clamp
• Adaptor sleeve
• Contact point case, contact point wrench
• Complete in “Shop Hardened” case
Indicator Set
Price
MT80-513-442-01
Horizontal Test Indicators and Sets
• Range: .060"
• Dial reading: 0-15-0
• Jeweled movement
• Automatic reversal
• 210° Swivel arc
• Tungsten carbide points .040",
.080", and .120" diameter
• 20° tilted dial face
• Anti-magnetic characteristics
Basic Indicator
consists of:
• ø.078" carbide contact
point
• ø.039" contact point
• ø.118" contact point
• ø.3/8" stem
• ø.5/32" stem
• nut
Indicators only
Grad.
Dial Dia.
Order No.
Price
.0005"
.0005"
.001"
1.5"
1"
1"
NA55-52562001
NA55-52562002
NA55-52562003
$Price
Price
Price
Indicators with Accessories
Description
Indicator 52-562-001
w/accessories
w/accessories
w/accessories
Order No.
Price
NA55-52562100
$Price
NA55-52562110
Price
NA55-52562120
Price
Price
$Price
Price
Price
Price
Price
Price
Price
Price
Indicator Type
Indicator Set
consists of:
• All that comes with the
Basic Indicator PLUS:
• Swivel clamp for ø.5/32"
stem and ø.3/8" stem
• Square arm
Electronic Test Indicator/Indicator Accessories
G - 16
®
Multimode Electronic
Test Indicator
Digital Test Indicator
4 Measuring
Resolutions!
• 4 Measuring Modes!
Min, Max, TIR and Direct
Smallest
• True Inch/Metric conversion. Resolution Division
0-40-0
.0005" • Water, oil and coolant
0-40-0
.00005" 0-1-0
0.01mm
resistant to IP65!
0-1-0 0.001mm
• 1-1/2" diameter dial face
rotates a full 360°
• Bar graph and numeric digital display.
• Meets or exceeds Din/ISO Standards Maximum error on .00005" scale at full range: .0004"
• .080" contact ball diameter
Order No.
Regular 1/2"
Regular 1-7/16"
NA55-54562777
NA55-54562888
Price
Order No. NB60-DTI1
$Price
Price
$Price
Accessories For AGD Indicators
Fits All Brands AGD Style Indicators – ISO 9001/2000
Angle and Hole Attachments
Holding Rods
Used for testing and checking internal surfaces or those
not easily reached by regular
dial spindles.
Description
Order No.
Price
5/16" Dia. x 6" Long
3/8" Dia. x 7-1/2" Long
1/2" Dia. x 8" Long
3/4" Dia. x 8" Long
MV65-CDI60
MV65-CDI61
MV65-CDI62
MV65-CDI63
$Price
Price
Price
Price
Description
Order No.
Price
Internal Hole, Long
Internal Hole, Short
Right Angle Attachment
MV65-CDI286
MV65-CDI29
MV65-CDI30
$Price
Price
Price
Neoprene Dust Guard
Mounting Collets
Protect Rack/Spindle Bearing From
Dust, Dirt, Fluid and Other Contaminants
Five models available for
various fixturing positions. All are compatible with CDI
Electronic Indicators.
Description
Order No.
Price
Up to .400" travel indicators
Up to 1.00" travel indicators
MV65-CDI70
MV65-CDI701
$Price
Price
Description
Order No.
Price
Split Collet 1/2" O.D., 3/8" I.D.
5/16"-40 Int. Thread, 3/8" Hole
1/2"-32 Ext. Thread, 3/8" Hole
MV65-CDI90
MV65-CDI92
MV65-CDI94
MV65-CDI96
MV65-CDI98
$Price
Price
Price
Price
Price
Contact Point Length
• Range: 0.02"/±0.5mm
• Grad.: 0.0005"/0.01mm
• Power on/off key
• Zero setting key
• Metric/inch key
• Tolerance key
• Contact point dia.: 2.5mm
• Accuracy: ±0.02mm
Depth Gage Bases
Complete with dial indicator mounting collet to make dial depth gage
using any AGD dial indicator. All bases shipped with one mounting collet. Hardened and ground on the contact surface.
Description
3/4"
3/4"
3/4"
3/4"
3/4"
W
W
W
W
W
x
x
x
x
x
5/8"
5/8"
5/8"
5/8"
5/8"
H
H
H
H
H
x
x
x
x
x
2"
3"
4"
6"
8"
L,
L,
L,
L,
L,
1-Hole
1-Hole
2-Hole
3-Hole
3-Hole
Order No.
Price
MV65-CDI512
MV65-CDI513
MV65-CDI514
MV65-CDI516
MV65-CDI518
$Price
Price
Price
Price
Price
These indicator accessories will function with any brand AGD style mechanical indicators and many electronic indicators
P-741
SPC Products
G - 17
DP-1VR Digimatic Mini-Processer
Features:
Mitutoyo’s new DP-1VR is so compact, it fits right on your palm. But with this powerful little device you can print data from a digimatic caliper, micrometer and more using
the Data Output function, and can even calculate statistics. Printing speed is excellent, and with the built-in thermal line printer there’s virtually no noise. What’s more,
the thermosensitive paper has outstanding durability and chemical resistance for long-term storage. The DP-1VR even lets you transmit the data to a computer using an
RS232C connecting cable.
Specifications
Printing method
Printing dot
Printing speed
Printing paper Printing line
Processing capacity
Printing data
Input timer
Voltage
Power
Micrometer stand and
cable not included
Order No.
MT80-264-504A
$Price
Output function
Thermal line printer
384 dot (8 dot/mm)
6.5mm/s (using AC adapter)
48m
Approx. 6500 lines for large characters
Approx. 12000 lines for normal characters
Mode: 1/2/3: 9999 data Mode 0: 100000
data
Measurement data, GO/±NG judgement, number of data, maximum/minimum value, range, average, standard
deviation, number of defective, fraction
defective, process capability index,
histogram, D-chart, control chart generation for Xd-bar and control limit data,
date and time.
Output the measuring data (RS232C) or
GO/±NG judgment
0.25s, 1s, 5s, 30s, 1min, 30min, 60min
120V
AC adapter 6V (not interchangeable to
DP-1HS) Electric battery: LR6 (alkaline), Ni-Mh (AA size)
Digital Displays and Remote Probes
•
•
•
•
•
•
•
•
•
Remote Probes with Certification
Incremental Measuring Mode
Preset/Absolute Measuring Modes
Range
Resolution
T.I.R. Measuring Mode
.600" / 15.mm
.0001" / .002mm
3 SPC Date Output Formats
.600" / 15.mm
.00005" / .001mm
Max or Min Reading Hold
1.0" / 25.4mm
.0001" / .002mm
Inch/Metric Display Conversion
1.0" / 25.4mm
.00005" / .001mm
Travel Reverse
2.0" / 50mm
.0001" / .002mm
4.0" / 100mm
.0001" / .002mm
User Selectable Resolution
Long Form Cert., Traceable to NIST, Included
with each Probe
Size
Order No.
2
2
3
3
Ret.
Ret.
MV65-LP2600
MV65-LP3600
MV65-LP2110
MV65-LP3110
MV65-LP2720
MV65-LP2820
Price
$Price
Price
Price
Price
Price
Price
Digital Displays
Resolution
Power
Order No.
.00005
110 Volt
MV65-LR3030
Cartridge Gage Head
Chrome plated and protected against outside
magnetic fields. Waterproof and air-tight. Can
be mounted in any position. Each comes with
a bushing to increase clamping diameter to
3/8" (if desired) and a 7 foot cable which plugs
directly into Model 1025 and other amplifiers.
Gaging pressure for all models is 63 grams.
599-989-2
Price
$Price
Model
599-982-10
599-989-2
Range
Repeatability
Pre-Travel
Hysteresis Error
± .040"
.0000004"
.004"/0,1mm
.0000004"
± .040"
.000004"
.002"/0,05mm
.0000008"
Tool No.
Cartridge
Size
Cable
Position
Cartridge
Length
Cartridge
Diameter
Order No.
599-982-10
599-989-2
Std.
Mini
Axial
Lateral
2.4"
.7"
.3"
.3"
MV45-44752
MV45-51679
Price
$Price
Price
P-751
Check Stands
G - 18
Indicator and Stand Combos
Features:
• Direct Inch/Metric Conversion
• 2-1/2" dial face
• Lug Back with 3/8" stem diameter
• Resolution .0005"/.01mm
• Tolerance indicators
• Min/Max measurement
Electronic Indicator features:
• 1"/25mm travel
• Lugback and 3/8" stem diameter
• Absolute/incremental reading
• Floating zero
• Carbide tipped point
Order No.
Price
Black Face Indicator and Stand Combo
Description
NA55-52580109
$Price
Indi-X Blue Electronic Indicator and Stand Combo
NA55-54580250
Price
Indi-X Electronic Indicator and Stand Combo
NA55-52580025
Price
• Floating zero
• Carbide-tipped point
• Includes 2 extra points for
small hole applications: one .078" dia. x 1" long and
one needle point x 1" long.
The Granite Quick Check
Dial Indicator Stand
Provides Rapid Height Positioning and
Fine Adjustment with the Turn of a Knob
Transfer Stand
Features:
• Ultra-smooth rack & pinion indicator
positioner offers 2" of vertical travel
• Rapid adjustment for checking multiple
height features on parts
• Twin knobs for left or right hand positioning
• Stem mount indicator holding arm
accommodates both ³⁄₈" and 8mm diameter stems
• Granite base: 8" × 6" × 2" high, .00005" flatness
• Stainless steel column
• Column height: 12"
• Column diameter: ⁹⁄₁₆"
Can be used with any AGD indicator
Features:
• Can be used with any AGD Dial Test
Indicator or AGD Dial Indicator
• Big, sturdy, enameled cast-iron base; stainless steel, ground post mounted at perfect right angles to the base
• Rapid preliminary positioning with the coarse adjustment knob
• Fine adjustment knob on the stand head for “0” settings
• Universal adjustment in horizontal
planes
• Arm is easily rotated to position the gage head over a surface plate or the anvil
• Base is precision ground and micro-lapped
• Supplied with serrated Anvil 101462
which can be interchanged with Flat
101461 and Domed 101463 Anvils
Description
Order No.
MT80-519-109E
Flat Anvil
Serrated Anvil
Domed Anvil
Dovetail Attachment
P-752
Accessories
MT80-101461
MT80-101462
MT80-101463
MT80-390070
Order No.
GG45-15825
$Price
Dial Gage Stands
7003 (with Serrated Anvil)
7004 and 7012 (with Flat Anvil)
Indicator not included.
Transfer Stand with
Serrated Anvil 101462
15825
(indicator
not
included)
Price
$Price
Price
Price
Price
Price
• 4" Maximum height capacity
• Fine-adjusting range for
zero-setting gage heads
• Designed for AGD type
probes with ³⁄₈" diameter
stems and all AGD type dial indicators
Description
With Serrated Anvil and Swivel Clamp
Assembly, Stem Clamp: .375"
With Flat Anvil and Swivel Clamp Assembly
Stem Clamp: .375"
With Flat Anvil and Swivel Clamp Assembly
Stem Clamp: .591" (15mm)
Order No.
Price
MT80-7003
$Price
MT80-7004
Price
MT80-7012
Price
Stand features:
• 6" x 6" x 2" granite
base.
• Positive lock screw.
• Fine adjustment knob
for zero setting.
• Column height is 8"
• Microscrew fingertip
control.
Black Face
Indicator features:
• Reading: .001"
• 1" Travel
• AGD Group 2
• Dial diameter: 2.25"
• Continuous reading:
0—100
Meters, Counters & Totalizers
G - 19
Electromechanical Counters
Totalizers
Model 10
Six figure, non-reset, electromechanical computer
designed for general purpose industrial, commercial
and counting applications. Designed for rear, panel,
snap-in, or base mounting. Used with industrial and
commercial counting applications.
Order No. MB50-P24816* • $Price
* Available while supplies last
Specifications
• Figures: 6 figured, white on black, .19" high
• Speed: 1,000 counts/minute
(min. 30ms-on, 30ms-off)
• Terminations: (2)#22 AWG
105°C wire leads, 8" long
• Temp. Range: -15°F to +140°F
• Approvals: UL recognized, CSA certified, CE certified
Description
115VAC, Base mount, non-reset
115VAC, Panel mount, knob reset
115VAC, Panel mount, non-reset
Order No.
Price
MB50-21016*
MB50-P21006*
MB50-P21016*
$Price
Price
Price
Hour Meter
• Extend power equipment life
• Requires drill, ¹⁄₈" bit & phillips screwdriver
• No battery required, triggered from the
spark plug wire
• For use on any gasoline engine up to two
cylinder either 2 or 4 cycle
Order No. MB50-51200310* •
$Price
4 Digit Hand Counters
A small hand tally. Each time thumb lever is
depressed a unit appears on dial. Positive reset;
one turn of knurled knob resets all figures to
zero. Bright plated. With finger ring. Capacity
9999. Used for inventory control, traffic flow, onthe-spot counting of sporting and social events.
Order No. MB50-251 •
$Price
Chrome Finish
5 Digit Small Reset Counters
Knob resets to zero. 4 flange holes for rigid
mounting. Imported. 1⁵₁₆" high × 2¹₂" wide
× 1¹₂". Approximately ⁶₁₀ (45 degrees) will act.
Arm may be in any position.
Normally Sells for
Many Times Our Low Price
Registers 0 to 99999
Order No. MB50-250 •
$Price
Deduct 10% — Lots of 10
Electronic Hour Meters
Model 51
Specifications:
• Display: large .200 LCD, black on light
background quartz accuracy: .02% over
entire voltage & temperature range
• Operating Temperature:
– 40°F to 160°F,
– 40°C to 71°C
• Terminals, 250 male blade(s)
Description
Order No.
Price
MB50-51202100* $Price
Panel Mount, Mini, 32-277VAC, 50/60 Hz, Hours
Panel Mount, 2 Hole, 32-277VAC, 50/60 Hz, Hours MB50-51202200*
Price
Electronic Hour Meters
Specifications:
• Figures: 6 LCD figures, .45" high
• Reset: push-button
• Speed: 0-40 counts/second,
(min. 12.5ms-on, 12.5 ms-off)
• Input: 6-240VAC or VDC
• Mounting: Base or panel
• Terminations: (2) #22AWG
• Power source: Internal
105°C wire leads, 8" long
lithium battery
• Temp. range: -14°F to +122°F
• Weight: 18 oz.
Description
Order No.
6 Figure, Panel mount, push-button reset
MB50-94150003*
Price
$Price
P-867
Chamfer Countersink & Hole Gages
BARCOR
Mechanical Chamfer Gage
G - 20
BARCOR
Electronic Chamfer Gage
The BARCOR CHAMFER GAGE is a precision instrument
designed specifically to measure the top (major) diameter of a
chamfer, countersink, center drill, or tapered hole. Merely press
the spring loaded, conically ground, precision 3-blade Gaging
Plunger into the chamfer or countersink and instantly read
the dial in .001" or .01mm/.02mm diameter increments.
Like BARCOR’s well-known mechanical counterpart,
the Electronic CHAMFER GAGE requires no Setting
Master (Standard) or look up chart. To “Zero” or “Set”
the gage, just press the base against any flat ground
surface and rotate the bezel to the “Set To” number
stamped on the back. Equipped with rechargeable
long life batteries, the gage may also be powered
continuously through its 110 VAC adapter/battery
charger or directly from a printer, PC, data collector,
etc.
The CHAMFER GAGE is a direct reading gage.
No Setting Master (Standard) or look-up chart is
required. To “Zero” the gage or check the setting,
press the base of the gage against any flat
ground surface and adjust the dial to read the
“Set To” number stamped on the back.
GUARANTEED ACCURACY:
within ± .001" in 0°–90° models / within ± .002" in 90°–127° models
Capacity
Order No.
90
0-3/8"
0-1/2"
0-1"
1-2"
MX55-0090
MX55-5090
MX55-1090
MX55-2090
Capacity
Order No.
127
MX55-0127
0-3/8"
MX55-5127
0-1/2"
MX55-1127
0-1"
MX55-2127
1-2"
Large Sizes Available
Price
$Price
Price
Price
Price
Price
$Price
Price
Price
Price
BARCOR Hole Gage
The BARCOR HOLE GAGE is a precision
instrument designed to give you a diameter
reading in less than two seconds. Merely
insert the precision ground, hardened tool
steel Gaging Plunger into the hole, press the
base of the gage firmly against the part and
read the dial directly in .001" or .02mm
diameter increments on the dial face.
GUARANTEED ACCURACY: ±.00025"
Order No.
90 O.D.
MX55-0090E
MX55-5090E
MX55-1090E
MX55-2090E
Order No.
127 O.D.
MX55-0127E
MX55-5127E
MX55-1127E
MX55-2127E
Price
$Price
Price
Price
Price
Price
$Price
Price
Price
Price
Capacity
Order No.
90
0-3/8"
0-1/2"
0-1"
1-2"
MX55-0090EL
MX55-5090EL
MX55-1090EL
MX55-2090EL
Capacity
Order No.
127
The BARCOR COUNTERSINK GAGE is a
precision instrument designed specifically to
measure the top (major) countersink diameter.
Merely press the spring loaded, exact angle
Gaging Plunger into the countersink and read
the dial directly in .002" or 05mm diameter
increments on the dial face.
The COUNTERSINK GAGE is a direct reading
gage. It reads the dimension as called out on
your print. This gage gives you fact,
accurate, and repeatable readings on the
shop floor or in the Gage Room. Virtually
foolproof, even the inexperienced can use the
COUNTERSINK GAGE with
reliable results.
GUARANTEED ACCURACY:
± .0005" or ± .015mm
$Price
Price
Price
Price
Price
MX55-0127EL
0-3/8"
MX55-5127EL
0-1/2"
MX55-1127EL
0-1"
MX55-2127EL
1-2"
Large Sizes Available
$Price
Price
Price
Price
Capacity
60°
60°
60°
60°
60°
60°
82°
82°
82°
82°
82°
82°
90°
90°
90°
90°
90°
90°
100°
100°
100°
100°
100°
100°
110°
110°
110°
110°
110°
110°
120°
120°
120°
120°
120°
120°
Order No.
90 O.D.
Capacity
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
.170"
.360"
.560"
.780"
.980"
1.180"
.170"
.360"
.560"
.780"
.980"
1.180"
.170"
.360"
.560"
.780"
.980"
1.180"
.170"
.360"
.560"
.780"
.980"
1.180"
.170"
.360"
.560"
.780"
.980"
1.180"
.170"
.360"
.560"
.780"
.980"
1.180"
$Price
Price
Price
Price
Order No.
127 O.D.
Price
MX55-0127EEL
MX55-5127EEL
MX55-1127EEL
MX55-2127EEL
Order No.
.020"
.160"
.360"
.560"
.780"
.980"
.020"
.160"
.360"
.560"
.780"
.980"
.020"
.160"
.360"
.560"
.780"
.980"
.020"
.160"
.360"
.560"
.780"
.980"
.020"
.160"
.360"
.560"
.780"
.980"
.020"
.160"
.360"
.560"
.780"
.980"
Price
MX55-0090EEL
MX55-5090EEL
MX55-1090EEL
MX55-2090EEL
$Price
Price
Price
Price
Price
MX55-040
MX55-130
MX55-230
MX55-330
MX55-430
MX55-530
MX55-630
MX55-730
MX55-830
MX55-930
MX55-1030
.010"-.040"
.030"-.130"
.130"-.230"
.230"-.330"
.330"-.430"
.430"-.530"
.530"-.630"
.630"-.730"
.730"-.830"
.830"-.930"
.930"-1.030"
Sets Are Available
Countersink
Angle
BARCOR
Countersink Gage
Price
$Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Order No.
MX55-600
MX55-601
MX55-602
MX55-603
MX55-604
MX55-605
MX55-820
MX55-821
MX55-822
MX55-823
MX55-824
MX55-825
MX55-900
MX55-901
MX55-902
MX55-903
MX55-904
MX55-905
MX55-1000
MX55-1001
MX55-1002
MX55-1003
MX55-1004
MX55-1005
MX55-1100
MX55-1101
MX55-1102
MX55-1103
MX55-1104
MX55-1105
MX55-1200
MX55-1201
MX55-1202
MX55-1203
MX55-1204
MX55-1205
Price
$Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
P-781
Magnetic Bases
G - 21
Magnetic Bases
Dial Gage Holder With Power On/Off
Magnetic Base – Fine Adjustment on Top Clamp
Economy Dial Gage Holder Magnetic Base –
•T
op Clamp Holds 3/8″
Stem and Dovetail
• Central locking mechanism
with spring loaded bearing
• NOGA dial gage holder is
3-dimensional
• Most powerful on/off magnetic
base (176 LBF)
• ³ ⁄₈″ 8MM, 6MM & dovetail clamp
• Unique 3-point arm lock system
• Improved “at base” single direction
fine adjustment
• Magnetic base with on/off switch
Standard Arm (4.33″ × 3.98″)
Order No. FN60-DG61003
Long Arm (5.26″ × 5.24″)
Order No. FN60-MG61003
$Price
Dial Gage Holder With Power On/Off
Magnetic Base – Fine Adjustment at Base
• Top clamp holds C\,″ stem and dovetail
• Central locking mechanism with
spring loaded bearing
• Noga dial gauge holder is dimensional
• Powerful 176LBF on/off magnetic base
with fine adjustment on the magnet base
Standard Arm (4.33″ × 3.98″)
Order No. FN60-DG10533
$Price
Long Arm (5.26″ × 5.24″)
$Price
Big Boy Dial Gage Holder
With On /Off Magnetic Base –
Fine adjustment on top clamp
• Most powerful on/off magnetic
base (290 LBF)
• 3-dimensional dial gage holder
Arm Dimensions
(12.80″ × 9.50″)
Order No. FN60-MA61003
$Price
P-756
70LBF Magnetic Base
(7.87″ Post, 7.48″ Arm)
Order No. FN60-PH3100
$Price
180LBF Magnetic Base
(7.87″ Post, 7.48″ Arm)
$Price
220LBF Magnetic Base
(10.23″ Post, 8.85″ Arm)
$Price
Long Reach Heavy Duty Holder
And Dial Gage Holder
With On/Off Magnetic Base –
Fine adjustment on top clamp
•C
entral locking mechanism
• Rigid, steel arms
• Powerful on /off magnetic base (180 LBF)
• Extra long arm (6.43″ × 4.45″)
$Price
Test Indicator Axial Support
• Central locking arm
• Holds indicators with ³⁄₈″ diameter
stem or dovetail
• Most useful for centering holes on
milling machines
Order No.
FN60-NF1018
$Price
$Price
Fine Adjustment at Base
Indicator Kits
COMBO
A Versatile Universal and
Mag Base Combo!
Mag Base:
• 2 universal ball sockets
• Microfine adjustment screw
• 3>\zn" extension arm
• Dovetail mounting
G - 22
A Versatile Test Indicator, Universal and Mag Base Combo!
Extra Points
.040"
.120"
Virtually unlimited positioning
as a Universal Base!
Test Indicator:
• Range: .030"
• Reading: 0-15-0
• Jewelled movement
• Auto-reversing
• .080" diameter point.
Description
Order No.
Price
Xtra Mag only
Xtra Mag with Test Indicator
NA55-52585105
NA55-52585100
$ Price
Price
.120"
Extra Points
Easy Mount Holder
X-Test Indicator:
• Range: .060"
• Dial Diameter: 1Z\x"
• 210° Swivel arc
• Tungsten carbide points:
040", 080" and .120"
Xtra Mag Base:
• 2 universal ball sockets
• Microfine adjustment screw
• 3>\zn" extension arm
• Dovetail mounting
All complete in a shop-hardened case!
Anyform & Easy Mount Holder
with Indicator
• Mount this flexible arm anywhere
• Arm is attached to vise grip locking
pliers that clamp securely to a
variety of surfaces.
• 12" flex arm can be set to almost
any measuring position required.
• Indicator features 0-1" travel, and
.001" graduations.; Inch/Metric
1"/25mm, .001"/.01mm grad.
• Includes shop-hardened case.
This kit provides a combination of holding applications. Use the vise grip
and flex arm to check runout and gear backlash. Attach the flex arm to the
Anyform base for magnetically mounting on virtually any metallic surface.
Combo Kit includes both:
Easy Mount Holder
• Mount this flexible arm anywhere
• Arm is attached to vise grip
locking pliers that clamp securely
to a variety of surfaces
• 12" flex arm can be set to almost
any measuring position required
• Indicator features 0-1" travel and
.001" graduations
Everything packed
in a convenient,
shop-hardened case!
Order No. NA55-52520700
Description
Order No.
Inch Model
Metric Model
NA55-52520757
NA55-52520730
Price
$Price
Price
$Price
Anyform Magnetic Base
• Fit mag base to any shape or form
• Magnetic segments conform to any
odd shape
• Rigid one piece construction.
• 40 lb pull
Mag Base and Dial Indicator Set
Mini Mag Set
NOGA Mini Mag Base
• Base size: 1Z\x" × 1Z\v" × 1C\v"
• Post size: 7"
• Unique fine adjustment
mechanism
• On/Off Lever
• Magnet pull: 70 lbs.
• Complete 22-Piece Contact Point Set
• High impact aluminum aircraft case
AGD Group 1 Indicator
• Range: .250"
• Dial diameter: 1B\,"
• 0-100 Continuous reading
P-762
• Includes 1" indicator and mag base,
plus rods, swivel clamp and shophardened case
• The 2" diameter .001" indicator
features: satin chrome finish,
tolerance hands, lug back and
revolution counter
.040"
All complete in a shop-hardened case!
Virtually unlimited positioning
as a Universal Base!
• The 6" high mag base features a
1.5" × 1.5" × 1.75" 50 lb. pull base
and a 4.5" long sidearm.
All exposed metal is finished
in anodized black for corrosion
resistance.
Indicator and Magnetic Base Kits
CHROME
CHROME
AGD Indicator features:
• AGD Group 2
• Dial diameter: 2Z\v"
• Travel: 1"
• Reading: .001"
• Continuous reading: .100"
With
Indi-X Blue Indicator features:
• 1"/25mm travel
• Auto Off feature
• 2Z\v dial face
• Floating zero
Flex Arm Mag Base features:
• 85 lb. pull magnet
• Corrosion resistant chrome plated flex arm
• Holds rigidly in almost any position
• V-base for mounting on rounded surfaces
Flex Arm Mag Base features:
• Corrosion resistant chrome plated flex arm.
• 85 lb. pull magnet
• Holds rigidly in almost any position.
• V-base for mounting on rounded surfaces.
Included Magnetic
Indicator Back for
mounting to most
metal surfaces!
Magnetic Indicator Back features:
• Use for positioning the indicator on most
metal surfaces.
• Protective coating
All in a shop-hardened case.
All packed in a Shop-Hardened case!
AGD Indicator &
Fine Adjust Mag Base
Flex-Arm Mag Base features:
•85 lb. pull
• Holds rigidly in any position desired.
• V-base for placing on round surfaces.
• On-Off lever release magnet.
Order No. NA55-52641300
$Price
Indi-X Blue Indicator features:
• 1"/25mm travel
• Auto Off feature
• 2Z\v" dial face
• Floating zero
Magnetic Base features:
• 85 lb. pull
• Fine adjustment.
• V-bottom base.
metal surfaces.
All in a shop-hardened case.
Order No. NA55-52585125
$Price
Flex Arm Base & White Face
Dial Indicator Combo
Indicator features:
•1" travel
• AGD group 2
• 2Z\v" dial diameter
• Reading: .001"
• Continuous reading: 0-100
$Price
Fine Adjust Mag Base Set
With
Included Magnetic
Indicator Back for
mounting to most
metal surfaces!
Indicator features:
• 1" travel.
• AGD group 2
• 2Z\v" dial diameter.
• Reading: .001"
• Continuous reading 0-100
Magnetic Base features:
• 85 lb. pull
• Fine adjustment.
• V-bottom base.
Order No. NA55-54585100
metal surfaces.
• Use for positioning the indicator
on most metal surfaces.
G - 23
Order No. NA55-54585075
$Price
Anyform Mag Base Set
Anyform Magnetic Base:
• Fit mag base to any shape or form.
• Magnetic segments conform to any
odd shape or contour.
• Cam-lock mechanism provides for
easy and accurate fine adjustments
of the steel segments.
• Rigid one piece construction.
• 40 lb pull.
Indicator features:
• 1" travel.
• AGD group 2
• 2Z\v" dial diameter.
• Reading: .001"
• Continuous reading 0-100
Order No. NA55-52585215
$Price
P-763
Machinist Tool Sets
G - 24
Machinist Measuring Sets
Machinist Universal Measuring Set
Basic Electronic Measuring Set
Set consists of:
1 – 0-1" Micrometer, .0001" graduation
1 – 6" Black face dial caliper, .001"
graduation 0-100 reading
1 – 6" Flexibile EZ read rule,
4R graduation
– Protective case
Order No. NA55-52004000
Set consists of:
• 0 – 1"/25mm Electronic Micrometer,
.00005"/.001mm resolution
• 6"/150mm Electronic caliper,
.0005"/.01mm resolution,
Patened ceramic chip
• Shop-hardened case
•
$Price
Order No. NA55-54004850 •
Toolmaker Universal &
Shockproof Measuring Sets
Water Resistant Electronic Measuring Set
Set consists of:
Order No. NA55-52095007
$Price
• 6" Steel Rule, 4R graduations
• 6"/150mm IP54 Electronic
Caliper, .0005"/.01mm
resolution, Direct RS-232
output, 5 year warranty
Shock Proof Set
Order No. NA55-52004239
$Price
Blackface Measuring Sets
Set includes:
• 0-6" Shockproof Caliper, .001
Graduations, .100" range/rev.,
Thumbroll
• 0-1" Outside Micrometer, .0001"
Graduations, Insulated frame
• Shop-hardened Case
• 0 – 1"/25mm IP54 Electronic
Micrometer, .00005"/.001mm
graduations
Test Indicator:
• .030" range
• .0005" graduations
• 2 dovetail stems and
3 contact points; .040",
.080" & .120"
Order No. NA55-54004854
$Price
Elctronic Caliper and
EZ-Read Micrometer Set
Set consists of:
• 0 – 1" EZ-Read Digit Counter
Micrometer, Direct reading to
.0001" without a vernier
• 6"/150mm Electronic caliper,
.0005"/.01mm resolution
Order No. NA55-54004201 •
Description
Order No.
Set with Caliper & Micrometer
Set with Indicator Caliper & Micrometer
NA55-52229710
NA55-52229770
Price
$Price
Price
$Price
Shockproof Dial Caliper & Depth
Attachment Combo
Xtra-Value Cal & Depth
Attachment Combo
with Wooden Case
Xtra-Value Cal:
•Accuracy: .001"/.02mm
•Range: 6"/150mm
•Stainless steel frame.
•Large easy-to-read display.
•Resolution: .0005"/.01mm
•Direct inch/metric conversion.
• Absolute/incremental
measurement.
•4 way measuring.
Depth Attachment:
• Attaches quickly
• Positive locking screw
• Precision-ground contact surface
Packed in a custom-fit wooden
case.
P-764
Easy depth measurement!
Available with
White or Black Face
Shockproof Dial Caliper:
• Tough shockproof design
• 4-way measuring
• Solid stainless steel construction
• Silky-smooth movement throughout
• 100" range per revolution
• .001 reading dial face
Order No. NA55-54008715
$Price
Set consists of:
• 0-1" Micrometer, .0001
graduations
• 6" Dial Caliper, .001
graduations, 0-100 reading
• 6" Flexible Rule
$Price
Depth Attachment:
• Attaches quickly
• Positive locking screw
• Precision-ground contact
surface
Packed in a custom-fit
wooden case
Description
Order No.
Price
Combo with 6" Whiteface Caliper
Combo with 6" Blackface Caliper
NA55-52008700
NA55-52008710
$Price
Price
Machinist Tool Sets
Basic Machinist Tool Set
Set Consists of:
1 – 6" Black Steel Rule, 16R graduation
1 – 0-1" Micrometer, .001" grad (Ratchet Thimble)
1 – 0-6" Dial Caliper, .001" grad
1 – Mahogany Case
G - 25
Electronic Tool Set
Set Consists of:
1 – 0-6" Digimatic caliper,
LCD resolution .0005"
1 – 0-1" Digimatic micrometer,
friction thimble, LCD
resolution .00005"
1 – Fitted wood case
Order No. MT80-950-940-9 • $Price
Basic Electronic Tool Sets
Order No. MT80-950-920 • $Price
$Price
Consists of:
• 0-1" Micrometer, .0001" grad
• 0-6" Dial Caliper, .001" grad
• Plastic Case
Order No. MT80-950-925
$Price
4-Pc. Machinist
Tool Kit
Set Consists of:
1 – 0-6" Dial caliper, .001" Graduation. Four-way measurement
1 – 0-1" Micrometer, .0001" graduation, Carbide faces.
1 – 0-6" Depth micrometer, .001" graduation, 4" Base
1 – 6" Full-flex rule, 5R graduation
1 – Fitted wood case
Order No.
MS80-11001200
$Price
Duo Set® Tool Kit with
Micrometer & Dura-Cal ® Caliper
Features of the Dura-Cal Caliper and Micromaster Micrometer
• Automatic shut-off extends battery life
• Fitted molded case
Features of the Dura-Cal Caliper
• IP67 Compliant
• Measures outside, inside,
depth and steps
• Rage: 0-6"/0-150mm
• Resolution: .0005"/0.01mm
Features of the Micromaster Micrometer
• Carbide anvil and spindle measuring faces
• Spindle lock, slip friction drive
• Range: 0-1.2"/0.30mm
• Resolution: .00005"/1µm
$Price
Apprentice Tool Set
No. S766AZ (without output)
Basic starter sets for electronic
measuring include slide calipers
and 1"/25mm micrometers.
799A-6/150: 0-6"/0-150mm
Electronic Slide Caliper
734XFL-1: 0-1"/0-25mm
Electronic Outside Micrometer
Micrometer Inspection Set
5-Pc. Technical
Measuring Set
Consists of 1 Each:
• 6" Divider
• 6" Inside caliper
• 6" Outside caliper
• 6" Inch/metric
pocket rule
• 5" Vernier caliper
Order No. NE60-TMS001 • $Price
Includes a 0—1"/25mm IP54
fluid resistant electronic
micrometer (54-860-001), a
compact, folding micrometer
stand with a unique locking
mechanism that positions
the micrometer for perfect
use and viewing
(52-247-005) and two each
.200" ball attachments
for special inspection
applications (52-285-005).
All packaged in a durable
wooden case.
Description
Order No.
Micrometer Inspection Set
Micrometer Stand Only
NA55-54860777
NA55-52247005
Price
$Price
Price
P-765
Machinist Tool Sets
G - 26
X-Test Horizontal Test Indicator &
Quill-Type Holder Combo
Test Indicator & Quill-Type
Holder Combos
Test Indicator:
• Range: .030″
• Graduations: .0005″
• Auto-reversing dial
• Includes two dovetail stems and a case
Quill Type Holder
Extra Points
• 1⁷⁄₈″ capacity
• Reach from 0-12″ dia.
.040″
.120″
• Adapts immediately for fast and positive indication
Indicator Holder
Test Indicator
Order No. NB65-QK1B • $Price
Nogaflex Magnetic Base and
Test Indicator
• Unique, 5 axis, 3 dimensional holder
• With fine adjustment
• Complete with .030″ × .0005″ test indicator
7023 Mini-Magnetic Stand
.030" Dial Test
Powerful permanent-magnet stand securely holds
indicator to work surface. Pull 30-35 Lbs.
Magnetic Stand Features:
• .217", 234" and 5/16" Rods
• 30-35 LBF Magnetic base
.030 Dial Test Indicator Features:
• .030" Range, 0-15-0 reading
• Dovetail, 5/16" and 3/8" stem mount
Also includes mounting clamp
$Price
P-766
with Procheck Magnetic Base
Indicator:
• .060″ Range
• Swivel arc: 210″
• Graduation: .0005″
• .080″ tungsten carbide point
• Includes 2 dovetail
• Jeweled movement
stems
• Furnished in • Easy-to-read tilted
molded case
dial
Mag base: Locking screw and two universal
ball sockets for setting at any angle position. Microfine adjustment screw. Removable Extra Points
extension arm. Dovetail form holder with locking control to hold dovetail test indicators.
.120″
Accepts .250″ diameter test indicator stems. .040″
The base is finished in wrinkled enamel.
BesTest ® Indicator,
Mag Base & Indicator Point Set
$Price
Order No. NB65-7023K*
X-Test Horizontal Test Indicator
Order No. NB65-52562001MB • $Price
Order No.
NB65-NF1033SET
With
Indicator
$Price
BesTest® Indicator:
• .0005″ Graduations – .030″ range.
Reads 0-15-0
• Includes carbide tip point: (.080″
dia. by ¹⁄₂″ long)
Magnetic Holder:
• Two universal ball sockets
• Fine adjustment
• Dovetail clamp
• Base 1³⁄₁₆″ dia., 1″ high
• Extension rod ¹⁄₄″ dia. by 3¹⁄₂″
Complete Set
Order No. MV45-51733MBP
$Price
Fowler set supplied with .040", .080" and .120"
Contact Points
Order No. NB65-52562778H • $Price
Order No.
NB65-525622001H
Test Indicator:
• .060″ Range
• Graduation: .0005″
• Swivel arc: 210°
• .080″ tungsten carbide point
• Includes 2 dovetail stems
• Furnished in molded case
Quill Type Holder
• 1⁷⁄₈″ capacity
• Reach from 0-12″ dia.
• Adapts immediately for fast
and positive indication
Machinist Tool Sets
with FREE
G - 27
Indicator/Mag Base Set
0-1" Travel Dial Indicator
with 22 pc contact point kit
Magnetic Base
• Magnetic base with • Can be supplied with
fine adjustment
Procheck indicator or
Brown & Sharpe E-Z
• 1" Travel indicator Read Console indicator
with .001" graduation, 0-100 reading, revolution counter
Indicator:
• Graduation: .001", range: 0-1"
• Continuous reading: 0-100
• Revolution counter hand
• Meets AGD specifications
Mag Base:
• Fine adjustment
• Accepts all AGD indicators & stem mount test indicators with ¹⁄₄" shank
• V-base for use on rounded surfaces
Economy
Indicator and Magnetic Base Set
Order No. NB65-01 • $Price
Standard - White Dial - no certification of calibration
Order No. NB65-52520110MB • $Price
Order No. NB65-52520110BMB • $Price
Indicator and Economy
Magnetic Base Set
Order No. MV45-01B • $Price
Premium - Black Dial with certification of calibration
or
Dial Indicator with Mighty Mag
Magnetic Base
Consists of 1 each of the following:
• 1" travel × .001" graduation black dial indicator
• 22 piece point kit for AGD style indicators
• Mighty Mag magnetic base
Order No.
MV45-VP98279B
Order No.
NB65-VP98279BF
$Price
$Price
Magnetic Bases
Complete with Indicators
Indicator
Magnetic Base Set
7046, which is supplied with a 1" travel (.001" reading) indicator, is for
general measuring purposes. 7045, with
.050" range (.0001" reading) indicator is for close tolerance work.
132 lbs. Pull magnet
Description
Range
Grad.
Order No.
Price
Magnetic Stand No. 7010SN
and No. 2804F-10 Indicator
0-050"
.0001"
MT80-7045
$Price
Magnetic Stand No. 7010SN
and No. 2416F-10 Indicator
0-1"
.001"
MT80-7046
Price
Dial Indicator, 1" Travel, .001"
Graduation, Magnetic Stand (no
fine adjustment), Plastic Case
$Price
P-767
Machinist Tool Sets
Machinist Sets
G - 28
3-Pc. Set-Up and Inspection Kit
9-Pc. Machinist Set-Up and Inspection Kit
Kit Consists of:
1 – 0-6″ Stainless steel dial caliper, .001″ graduation
1 – 0-1″ Outside micrometer, .0001″ graduation
1 – .0005″ Test indicator with ³⁄₈″ and ⁵⁄₃₂″ shank
Consists of 1 each of the following:
• 6″ × .001″ Dial caliper
• 0-1″ × .0001″ Outside micrometer
• .030″ × .0005″ Test indicator
• 1″ Travel × .001″ graduation
dial indicator
• Quill clamp-type indicator holder
• Magnetic indicator base
with fine adjustment
• 22 piece point kit for
AGD style indicators
• 6″ scale with ¹⁄₆₄, ¹⁄₃₂, ¹⁄₁₆,
and ¹⁄₈ graduation
• 12″ scale with ¹⁄₆₄, ¹⁄₃₂, ¹⁄₁₆,
and ¹⁄₈ graduation
Order No. NB65-TCM3 • $Price
Kit Consists of:
1 – 0-6″ Stainless steel dial caliper, .001″ graduation
1 – 0-1″ Outside micrometer, .0001″ graduation
1 – Magnetic base with fine adjustment
1 – 1″ Travel indicator, .001″ graduation
1 each – 6″ and 12″ scales with 4R graduation
Order No. NB65-MSK9 • $Price
0 - 6″ Micrometer Set
& Telescoping Gage Set
0 - 6″ Micrometer Set
• .0001″ Graduation
• Setting standards
• Ratchet stop
• Spindle lock
6 Pc. Telescoping
Gage Set
• 0 - 6″ Range
• Self centering
contacts
Order No. NB65-6CRMST • $Price
Order No. NB65-MSK6 • $Price
6-Pc. Layout and Inspection Kit
• 0 - 1″ × .0001″ Outside
ratchet micrometer
• 6″ × .001″ Dial caliper
• 4 Pcs. 12″ combination
square 4R graduation
Order No. NB65-3PCS2
$Price
P-768
6-Pc. Machinist’s Starter Set
Featuring
1″ Value-Line Mike
Here’s what you get:
B&S 0-1″ Micrometer
• Satin-chrome thimble,
.0001″ reading, Tungsten
carbide tipped anvils,
enamel frame with
spindle lock
6″ ProChek dial caliper
• .001 graduations,
.100″ per revolution of dial
0-1″ AGD Indicator
• .001 graduations,
.100″ per revolution of dial
• Magnetic base with fine adjustment
• Two flexible steel rules or
one 6″ and one 12″ long,
both with 4R graduations
(6″ shown, 6″
and 12″ in set)
Machinist’s Starter Set with B&S 1″ Micrometer
Order No. NB65-MSK6BS • $Price
6-Pc. Machinist Set-Up and Inspection Kit
Electronic Height Gages
G - 29
Trimos Altia Height Gage
Altissimo 24" Digital Height Gage
Versatility, Reliability, Durability
•D
ynamic bi-directional probing with point and scan modes
• Five measurement modes: (ID/OD
Diameters, center, TIR, max/min.,
continuous display)
• A
utomatic calculation of eight measurement routines
• Speed wheel also has fine adjust
• Locking mechanism for scribing
• Rechargeable NiMH batteries with 100 hours of continuous life
• Auto power off after two hours with retention of probe calibration
• Output data to Starrett SPC Plus® hardware and software and to PCs
• Instant inch/millimeter conversion
• Two selectable Datums and Preset
Combining a sleek ultra-modern design, robust construction, a
user-friendly interface, a 5-year warranty and exceptional value
the Fowler/Trimos Altia is the ideal electronic multifunction
height gage for your quality control or workshop environment.
NO EXPENSIVE ACCESSORIES REQUIRED!
$Price
Measuring Range
Resolution
Accuracy
Repeatability
Power Source
Standard Accessories
Dimensions
Weight
Perpendicularity
4"/600mm (Extendable to 30"/750mm
2
by rotating probe holder 180°)
.0001"/.0005"/.001"
(.001mm/.01mm/.02mm)
±.0006" (.015mm) Band width at 68°F
(20°C)
±.0001" (±.002mm)
iMH rechargeable batteries (120V
N
AC/60Hz charger/adapter furnished)
Operation time: 80 hr. recharging time:
10 Hours
.1875"/4.8mm dia. Carbide probe, probe
holder, AC charger/adapter, probe
calibration block
11" L × 7³⁄₄"W × 36¹⁄₂" H
40 lbs. (18Kg)
.0004" (0.010mm)
Magna 400/700 Height Gages
Made to withstand severe workshop conditions.
• Shop proof technology
• Long measuring span and rugged design
• Fully protected against: Water, Dust & Oil
Features:
• 16” (400 mm) and 28” (700 mm) measuring range
• Electronics completely protected against liquids or dust penetration
• Automatic diameter measurement using TESA’s patented system which determines the culmination point
• Parallelism and perpendicularity measurements
• TESA opto-electronic measuring system (patented)
• Compatible with TESA MICRO-HITE accessories, including measuring inserts and holder
• SCS calibration certificate delivered with each instrument
P-774
Unlike some of our competitor's height gages that
require expensive accessories, the Altia comes fully
equipped to handle diameter, center line and center to
center line measurements.
Specifications:
Measuring range
Application range
Accuracy
Squareness deviation (in measuring direction)
Max. resolution
Repeatability (2s)
Max. displacement speed
Measuring force
Data output
24"/620mm
27"/700mm
.00079"/20 µm
20 µm
.000050"/.001mm
2 µm
1 m/s
0.8N
RS232
Description
Order No.
Price
0-24"/620mm Altia Electronic Height Gage
NA55-54191024
$Price
Technical Data
Model No.
Measuring span
Application range with standard
insert holder 00760143
Application range with insert
holder 00760057
Application range with insert
holder S07001622
Max. perm. error
Repeatability
Resolution
Max. deviation in
perpendicularity (frontal)
Displacement speed
Measuring force
Autonomy
Masse
Air Cushion
Battery pack
Digital output
Protection degree
Measuring head lock
Fine adjustment
Storage temperature range
Operating temperature range
Order No.
Price
TESA-HITE MAGNA
400
700
00730047
00730059
415 mm / 16 in
715 mm / 28 in
570 mm / 22 in
870 mm / 34 in
0 to 625 mm / 0 to 24 in
0 to 925 mm / 0 to 36 in
795 mm / 31 in
1095 mm / 43 in
< 8 µm / < 0.0003 in
2s=<3 µm / 2s=<0.00015 in (flat surfaces)
2s=<5 µm / 2s=<0.00020 in (inside bores)
0,001 / 0,005 / 0,01 mm
.0001 / .0002 / .001 in
0,5 m/s
1,5 N ±0,5 N (acoustic signal)
60 h
14 kg
16 kg
No
No
6 V battery, rechargeable
RS-232
IP55 or IP65 for electronic unit and measuring system
Yes
Yes
-10°C to 60°C
10°C to 40°C
MV40-28260
$Price
MV40-28261
$Price
Height Gage Protractors
G - 30
Universal Bevel Protractors
Bevel Protractor
with 6" & 12" Blades
• Magnifier for vernier
• Includes 6" & 12" blades and an angle attachment
• Satin chrome finish for easy readings
• Graduation: 360°
• Reading to 5 minutes
Order No. NA55-52440612
$Price
For more precise angle measurements,
the Protractor can be attached to
MITUTOYO Height Gages. A clamp for
this is furnished with the case.
Universal Bevel Protractor
Procheck Features:
• 6" blade
• 12" blade
• Acute angle attachment
Order No. NB45-496G
$Price
Bevel Protractor with Dial Reading
• Dial reads each 10 degree and
indicator pointer shows each
degree and 5 minutes of angle
• Includes blade, acute angle
attachment and fitted case
• Can be set at 5 minute intervals by a fine adjustment knob
• Satin chrome finished dial face has clear and crisp graduations
• Dial from 0-90, 90-0, 0-90, 90-0 around 0-360 degree
• Hardened stainless steel, rust and wear resistant for long life
• Flush-reading, no parallax error, give a high degree of accurate measurements
• With magnifier glass for easier and faster reading
• Attachment clamp 950749 for inch height gage is supplied
• Fine adjustment knob for measuring or setting of minute angles
• Positive rigid locking clamp
ACCESSORIES
Order No.
MT80-187-103
MT80-187-104
MT80-187-105
MT80-950749
MT80-950750
AND PARTS
12" Blade $Price
6" Blade $Price
Acute angle attachment $Price
Attachment Clamp for Inch Height Gages $Price
Attachment Clamp for Metric Height Gages $Price
Graduation
Description
with 12" Blade
with 6" & 12" Blade
Order No. NB45-496GD Order No. NA55-52440777
$Price
$Price
Dial
Vernier
Order No.
Price
With 6" Blade and Height
Gage attachment clamp
1°
5 min.
MT80-187-904
$Price
With 12" Blade and Height
Gage attachment clamp
1°
5 min.
MT80-187-906
Price
Bevel Protractor
Electronic Universal Protractor
with 6" & 12" Blades
• Range selection: 1x360°,
2x180°, 4x90°
• Dual reading LCD display arc
minutes/decimal degrees
• Preset function
• 6" and 12" blades and acute
angle attachment included
• Fine adjustment
• RS-232 output
• Measuring range: 0-360°
• Resolution: 30"
• Accuracy: ±5′
P-776
Blade
Size
Order No.
7"
12"
7 & 12"
MV70-51394
MV70-51396
MV70-51398
Price
$Price
Price
Price
Supplied with Case
With standard letter of certification
Size
Order No.
Price
7" & 12"
MV70-66929
$Price
Supplied with Case
Order No. NA55-54440750
$Price
Order No. MV70-51392 Starrett Acute angle attachment optional $Price
• 360° scale in 1° increments
• 5 minutes minimum reading
• Fine adjustment and lockbolt
• Magnifier movable over entire Vernier
• Tool lies flat on the work
• High precision measurement
Bore Gages
G - 31
Dial Bore Gage Set
.0005"Graduation
-
.74"
1.5"
2.4"
6.0"
No.
of Anvils
Order No.
Price
4"
6"
6"
6"
11
9
6
11
NB45-CBGB2
NB45-CBGC2
NB45-CBGD2
NB45-CBGE2
$Price
Price
Price
Price
Type 511, 526
• All Mitutoyo Dial Bore Gages are supplied with AGD Series 2 Dial Indicator
and fitted carrying case
• A reference chart is furnished which indicates the spacer and rod sizes to be selected for the specific range.
• 10" extension rod to increase measuring depth from the edge is available for 511-185, 186, 188 and 189 (Part No. 101421)
• To increase the length of interchangeable measuring rods, a 2" extension collar is available for use with 511-162 and 511-166 (Part No. 101421)
Interchangeable
Anvil
Interchangeable
Anvil
A
Probe
Style A
C
Probe
Style C
Gaging
Head
D
Pre-Loaded
Plunger
Roller Guide
Range
Probe
Depth
Probe
Type
No. of
Anvils
No. of
Spacers
Order No.
.24-.4"
.3-.4"
.4-.7"
.7-1.4"
1.4-2.5"
2.0-6.0"
4.0-6.5"
6.5-10.0"
10.0-16.0"
2"
2.2"
2.4"
4"
6"
6"
6"
10"
10"
A
C
C
D
D
D
D
D
D
9
6
8
8
6
11
13
6
5
—
—
—
3
4
4
4
6
6
MT80-511-212
MT80-526-122
MT80-526-123
MT80-511-163
MT80-511-164
MT80-511-166
MT80-511-187
MT80-511-188
MT80-511-189
Range
Probe
Depth
Probe
Type
No. of
Anvils
No. of
Spacers
Order No.
.24-.4"
.3-.4"
.4-.7"
.7-1.4"
1.4-2.5"
2.0-6.0"
4.0-6.5"
6.5-10.0"
10.0-16.0"
2"
2.2"
2.4"
4"
6"
6"
6"
10"
10"
A
C
C
D
D
D
D
D
D
9
6
8
8
6
11
13
6
5
—
—
—
3
4
4
4
6
6
MT80-511-213
MT80-526-119
MT80-526-120
MT80-511-159
MT80-511-160
MT80-511-162
MT80-511-184
MT80-511-185
MT80-511-186
Price
$Price
Price
Price
Price
Price
Price
Price
Price
Price
.0005 Inch Graduation – Wide Range
Range
Probe
Depth
Probe
Type
No. of
Anvils
No. of
Spacers
Order No.
Price
.7-6.0"
4"/6"
D
25
8-7
MT80-511-911
$Price
Range
Probe
Depth
Probe
Type
No. of
Anvils
No. of
Spacers
Order No.
Price
.7-6.0"
4"/6"
D
25
8-7
MT80-511-912
$Price
.0001 Inch Graduation – Wide Range
Price
$Price
Price
Price
Price
Price
Price
Price
Price
Price
Accessories
Description
Order No.
Price
2" Ext. Collar for interchangeable rods
(for use with 511-162 and 511-166)
MT80-101421
$ Price
10" vertical extension rod for 511-185, 186, 188, 189 MT80-952361
Price
Dial Bore Gages
For inspecting bores and checking hole size. An adjusting range
screw with positive locking feature and two centralizing plungers
provides three-point contact for true alignment. The gaging contact
and centralizing plungers are hardened tool steel, spring loaded
for sensitivity and repeatability.
Graduation
Total
Range
w/Extension
Max.
Bore
Depth
Max.
Plunger
Travel
Order No.
.0001"
.0005"
.0001"
.0005"
.0001"
.0005"
.0001"
.0005"
1-1/2"-3"
1-1/2"-3"
3"-5-3/16"
3"-5-3/16"
5"-8-1/8"
5"-8-1/8"
8"-12-1/8"
8"-12-1/8"
4"
4"
6"
6"
6"
6"
7"
7"
.030"
.030"
.035"
.035"
.035"
.035"
.035"
.035"
MV70-56264
MV70-56270
MV70-50386
MV70-50392
MV70-50388
MV70-50394
MV70-50390
MV70-50396
P-778
Price
$Price
Price
Price
Price
Price
Price
Price
Price
This gage measures the diameter of any hole within range of its interchangeable probes. With the indicator set to the nominal dimension
and its dial adjusted to zero, the probe is inserted
in the hole with variations to .0001" read on the
indicator. Since measurements are taken by comparison, a set master such as gage blocks or bench type micrometer should be used as a
reference standard.
Graduation
Total
Range
No. of
Probes
Order No.
.0001"
.0001"
.0001"
.107"- .266"
.217"- .594"
.560"-1.565"
5
6
8
MV70-55791
MV70-55792
MV70-55793
Price
$ Price
Price
Price
115 MAX.
Bore Gages
118
.38
.70
1.4
2.0
Probe
Depth
236
Range
220 MAX.
• Easy to use – simple sturdy construction
• For close tolerance measurement of holes, taper and roundness
• Self-centering
• Gages are supplied with AGD Group 2 Dial Indicators and fitted case
Bore Gages
G - 32
XT Holematic Pistol Grip Bore Gages
• 5-Year warranty
• RS-232C output, self centering heads
• Two preset memories, constant measuring pressure
• Tungsten carbide measuring faces on all 3-point heads from .5" (12.5mm)
• Blind bore measuring above .5"
• Fixed anvils
• Extensions available for deep measuring
• Heads with special anvils available for threads, splines, slots, etc.
• Setting rings included in all sets
• Includes UKAS certificates for all micrometers and setting rings
Order No.
NA55-54566010
NA55-54566020
NA55-54566050
NA55-54566100
NA55-54566105
NA55-54566110
NA55-54566200
NA55-54566210
NA55-54566620
The
Range
# of Anvils
.7 -1.5"
2-6"
1.4-6"
35—160mm
1.4-6" -metric
Order No.
NA55-52646100
NA55-52646300
NA55-52646400
NA55-52646220
8
11
15
16
$Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
$Price
Price
Price
Price
Electronic
Bore
Gages
All the benefits included in the X-Tender Dial Bore Gage are now available with an electronic indicator providing inch/metric reading capability.
Features:
• Dual reading inch/metric electronic indicator
• Bar graph and numeric digital display
• Resolution: .00005"/.001" mm
• Preset with recall
• ABS/INC measurement
Order No. NA55-54646401
• Min/Max/TIR
• Includes Free Instructional CD
$Price
®
Price
shown
TRIGA-BORE™ 3-Point Bore Gaging System
For The Accurate and Precise Measurement of Internal Diameters
Measuring Range: .236"/6mm to 7.87"/200mm
• Easy to use
• Self Centering Operation
• Interchangeable/Economical Heads
• Ordering as easy as 1, 2, 3 (See below)
ORDERING INSTRUCTIONS
I. Choose handle by range
TRIGA BORE™ Pistol Grip Style Bore Gage Handles*
Order No. GG45-20308 Accepts heads: .236"/6mm - .630"/16mm • $Price
Order No. GG45-20309
Accepts heads: .630"/16mm -7.874"/200mm • $Price
Range
.25 -.375"/6- 10mm
.375-.75"/10- 20mm
.75-2"/20- 50mm
2-4"/50-100mm
4-6"/100-150mm
6-8"/150-200mm
4-8"/100-200mm
.75-4"/10-100mm
.25-.75"/6- 20mm
Dial Bore Gage Sets
• Carbide anvils • Graduation: .0005"
• Easily adjustable • Self-centering
• Insulated grip
• Chrome plated handle
• Includes extension holder & fitted case
*Accepts Indicator with 3/8" diameter or 8mm diameter
(with bushing included). Operates with Indicators having 1” travel.
II. C
hoose correct gage head and master setting ring
3-Point Bore Gage Heads and Master Setting Ring
III.
Master Setting Ring
Bilateral Class Z Steel
Triga-Bore™ Bore Gage Head Only
Head Size
Inch
MM
Head Accuracy
.236-.315
.315-.394
.394-.511
.511-.630
.630-.787
.787-1.023
1.023-1.260
1.260-1.575
1.575-1.968
1.968-2.362
2.362-2.756
2.756-3.150
3.150-3.543
3.543-3.937
6-8
8-10
10-13
13-16
16-20
20-26
26-32
32-40
40-50
50-60
60-70
70-80
80-90
90-100
.0001
.0001
.0015
.0015
.0015
.0015
.0015
.0015
.0015
.0015
.0015
.0015
.0015
.0015
Order No.
GG45-20312
GG45-20313
GG45-20314
GG45-20315
GG45-20316
GG45-20317
GG45-20318
GG45-20319
GG45-20320
GG45-20321
GG45-20322
GG45-20323
GG45-20324
GG45-20325
ELECTRONIC INDICATOR
Featuring .00005" (0.001mm) Resolution with ± .0001" Accuracy; Repeatability: 0.002mm/.001" ± 2s.
Price Each
$ Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Size Inch
Order No.
Price Each
.2912
.3437
.4375
.5025
.7187
.9062
1.0312
1.4062
1.7500
2.1875
2.5625
2.9375
3.3437
3.7500
GG45-21162
GG45-21164
GG45-21167
GG45-21172
GG45-21177
GG45-21185
GG45-21191
GG45-21205
GG45-21450
GG45-21451
GG45-21452
GG45-21453
GG45-21454
GG45-21455
$ Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Order No. MT80-543-456B 0-1" (0-25mm) • $Price
Example for .500" bore, Handle: GG45-20308, Head: GG45-20314, Ring: GG45-21167, Indicator: MT80-543-456B
P-779
Snap Gages
Adjustable Limit Snap Gages
Larger Sizes Available
Save
Up To
75%
• Top quality brands
• Shelf worn
• All styles available
• Wide variety of styles
and sizes in stock
Model A supplied with
round buttons as standard
Model A
G - 33
U.S. Government Surplus Adjustable
Snap Gages
Model C supplied with
square buttons as standard
Model C
Order No.
0 - 1/2"
1/2 - 1"
1 - 1-1/2"
1-1/2 - 2"
2 - 2-1/2"
2-1/2 - 3"
3 - 3-3/4"
3-3/4 - 4-1/2"
4-1/2 - 5-1/4"
5-1/4 - 6"
NC50-1A
NC50-2A
NC50-3A
NC50-4A
NC50-5A
NC50-6A
NC50-7A
NC50-8A
NC50-9A
NC50-10A
Price
$Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
All Snap Gages may be supplied
set and sealed at additional cost.
Size Range
Order No.
0 - 1/4"
1/4 - 1/2"
1/2 - 3/4"
3/4 - 1"
1 - 1-1/4"
1-1/4 - 1-1/2"
1-1/2 - 1-3/4"
1-3/4 - 2"
2 - 2-1/4"
2-1/4 - 2-1/2"
2-1/2 - 2-3/4"
2-3/4 - 3-1/16"
3-1/16 - 3-7/16"
3-7/16 - 3-13/16"
3-13/16 - 4-3/16"
4-3/16 - 4-9/16"
4-9/16 - 4-15/16"
4-15/16 - 5-5/16"
5-5/16 - 5-11/16"
5-11/16 - 6-1/8"
6-1/8 - 6-5/8"
6-5/8 - 7-1/8"
NC50-1C
NC50-2C
NC50-2XC
NC50-3C
NC50-3XC
NC50-4C
NC50-4XC
NC50-5C
NC50-5XC
NC50-6C
NC50-6XC
NC50-7C
NC50-7XC
NC50-8C
NC50-8XC
NC50-9C
NC50-9XC
NC50-10C
NC50-10XC
NC50-11C
NC50-11XC
NC50-12C
Price
$Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Style “A”
Style “C”
Range
Order No.*
Range
—
—
0 - 1/4"
—
—
1/2" - 3/4"
3-3/4" - 41/2"
NC51-8A
—
—
Order No.*
NC51-1C
Price
$Price
NC51-2XC
Price
—
Price
—
4-3/16"- 4-9/16" NC51-9C
Price
—
—
4-9/16"- 4-15/16" NC51-9XC
Price
—
—
5-11/16"- 6-1/8" NC51-11C
Price
—
—
—
NC51-11XC
Price
—
10-1/8"- 10-5/8" NC50-15XC
Price
—
—
10-5/8"- 11-1/8" NC51-16C
Price
15" - 16"
NC51-20A
6-1/8"- 6-5/8"
—
—
Price
Electronic Snap Gages – Flat Anvils
Indicator Features:
• Dual reading Inch/Metric Electronic Indicator
• Preset with recall
• ABS/INC Measurement
• Min/Max/TIR
This versatile electronic snap gages provides
all the features of standard snap gages.
Special Features:
• Ranges available: 0-8"/0-200mm
• Adjustable anvil through 1"/25mm range
• Adjustable gaging pressure
• Lightweight, metalurgically stabilized aluminum frame
• .66" Square tungsten carbide anvils.
• Within the 1/2" central square surface, anvils are
parallel within: .00015" on sizes up to 4"/100mm
.0002" on sizes 4"/100mm to 8"/200mm
P-782
Inch
0-1"
1-2"
2-3"
3-4"
4-5"
5-6"
6-7"
7-8"
Snap Gage
with Electronic Indicator
Snap Gage Only
Range
Metric
Order No.
0-25mm
22-51mm
51-76mm
76-102mm
102-127mm
127-152mm
152-178mm
178-203mm
NA55-52666471†
NA55-52666472†
NA55-52666473†
NA55-52666474†
NA55-52666475†
NA55-52666476†
NA55-52666477†
NA55-52666478†
Price
Order No.
$ Price
Price
Price
Price
Price
Price
Price
Price
NA55-54666371
NA55-54666372
NA55-54666373
NA55-54666374
NA55-54666375
NA55-54666376
NA55-54666377
NA55-54666378
Price
$ Price
Price
Price
Price
Price
Price
Price
Price
† Dial Indicators for use with Snap Gages
Resolution
Range
Reading
Order No.
Price
.0001"
.0005"
.01mm
.002mm
.200"
.50"
5mm
2mm
0-50-0
0-25-0
0-50-0
0-10-0
NA55-52540000
NA55-52540001
NA55-52540003
NA55-52540004
$Price
Price
Price
Price
Description
Order No.
Replacement Electronic Indicator, Range: 0-.5"
Replacement Battery
NA55-54520040
NA55-54902110
Price
$Price
Price
Size Range
Thickness Gages
Internal/External
Caliper Gages
• Easy to hold
• RS232 output
• Rugged housing
• Large LCD display
• Accuracy ± .0008"/±.02mm
G - 34
Internal and External
Dial Caliper Gages
• Preset capability
• Absolute/incremental measurements
• High-impact, aircraft aluminum
case
• For checking internal bores,
recess diameters, etc.
• Each instrument has a
movement of 1"
• Can be set with a micrometer
or ring gage
• Dial face diameter 2"
• Bezel rotates for zero setting
• Arms automatically open when
button is released
• Length of arm 3¹₄"
• Carbide measuring points
Made to
precision
tolerances
Internal
Order No.
External
Price
NA55-54554611
NA55-54554622
NA55-54554623
NA55-54554624
NA55-54554625
NA55-54115777
$Price
Price
Price
Price
Price
Price
Range
.200" - .590" / 5-15mm
.200" - 1" / 5-25mm
.400" - 1.2" / 10-30mm
.790" - 1.6" / 20-40mm
1.2" - 2" / 30-50mm
Internal
Range
Order No.
.375 - 1.375"
.750 - 1.750"
1.125 - 2.125"
1.500 - 2.500"
1.875 - 2.875"
2.250 - 3.250"
2.875 - 3.875"
3.250 - 4.250"
3.625 - 4.625"
4.000 - 5.000"
NB45-IC37
NB45-IC75
NB45-IC112
NB45-IC150
NB45-IC187
NB45-IC225
NB45-IC287
NB45-IC325
NB45-IC362
NB45-IC400
Price
$Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
External
Range
Order No.
0" - .400" / 0-10mm
0" - .790" / 0-20mm
.400" - 1.2" / 10-30mm
.790" - 1.6" / 20-40mm
1.2" - 2" / 30-50mm
NA55-54554711
NA55-54554722
NA55-54554723
NA55-54554724
NA55-54554725
NA55-54115777
Price
$Price
Price
Price
Price
Price
Price
Range
Order No.
0 - 1"
.375 - 1.375"
.750 - 1.750"
1.125 - 2.125"
1.500 - 2.500"
1.875 - 2.875"
2.250 - 3.250"
2.875 - 3.875"
3.250 - 4.250"
3.625 - 4.625"
NB45-EC01
NB45-EC37
NB45-EC75
NB45-EC112
NB45-EC150
NB45-EC187
NB45-EC225
NB45-EC287
NB45-EC325
NB45-EC362
Price
$Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Min-Wall
Thickness Gaging
O-Ring/Grooves
104 Series
313 Series
• Arm reach 2.4"
• Graduation .0005"
• Gage arms are spring-loaded, thus eliminating
operator “hand touch” variances
• Fast, accurate, repeatable
measurements
• New rack gear movement for increased
accuracy and repeatability
• New rack gear movement for
increased accuracy and
repeatability. Oil and corrosion
resistant
• Large, easy to read graduations.
Gage uses a 2-pointer system.
NB43-104101
Calibrated
Measuring
Range
Total
Opening
Range
Max
Depth
Groove
Min
Width
Groove
Carbide Ball
Contact
Standard
0.2"-0.6"
.19"-.61"
0.094"
0.050"
0.8"-1.2"
1.2"-1.6"
.57"-1.21"
.96"-1.61"
0.200"
0.200"
0.040"
0.040"
0.006"
Rad. Tip
0.040"
0.040"
P-784
NB43-313302
Order No.
Price
NB43-104102*
$Price
Calibrated
Measuring
Range
Total
Opening
Range
L Dim
Reach
of Arms
Contact
Type
Inch
Graduation
Order No.
Price
NB43-104104*
NB43-104105*
Price
Price
0.0"-0.4"
0.61"
2.4"
C
0.0005"
NB43-313302*
$Price
Roughness Testers
G - 35
Portable Surftest SJ-201P
This Surftest is designed to be hand carried for portable use anywhere.
Power is supplied by either AC or the unit’s own rechargeable batteries.
Data is presented in micro-inches on a large LCD screen. An upper control
limit may be set for GO/NO-GO inspection. For hard copy printout the Surftest
may be connected to Mitutoyo’s Surftest printer. SPC processing is also possible by connection to any of the Mitutoyo data processors.
Order No.
MT80-178-923-2A
Standard Accessories include:
• Detector drive unit
$Price
• AC adapter for 120V
• Includes all the functions needed on the shop floor
• Compact size, lightweight, easy-to-use, and high accuracy
• Conforming to various standards – current and
previous JIS standards, also conforms to
DIN, ISO, and ANSI
• Go/No
• V-Groove on the bottom of the
drive unit makes it easy to
place on a cylindrical
workpiece
• Carrying case
• 11 Surface roughness
parameters allow a variety of
evaluations
• Precision roughness specimen for inch/metric no. 178-602
• Retractable detector unit
• Calibration stage
• Easy calibration
• Operation manual
• Data output function – RS-232c and Mitutoyo Digimatic Output SPC available for
data output
• Connecting cables
• Standard detector 178-390 stylus tip radius: 5um (200 uin)
Portable Surface Roughness Tester
• Measures Ra, Rz, Rmax/Ry
• Assessment length selection (1, 3, & 5 cutoffs)
• Meets ASME B46.1, ISO and DIN standards
• Rugged and reliable for either shop
floor or lab use
• Includes general purpose probe,
certified reference specimen,
battery and fitted case
• Convenient, pocket-sized unit
• Large, vivid LCD display
• Measures Ra or Rz on numerous
surfaces
• Piezo-electronic pick-up stylus
w/diamond tracer tip, ISO Class 3
tolerance
• Very affordable & simple to use
• Furnished w/carrying case, charger
(unit is battery powered or line cord)
• Range: Ra: 0.05-10.0µm
Rz: 0.1-50µm
• Cutoff lengths:
0.0009″, 0.03″, 0.09″
Order No. NA65-EDM1500311
$Price
$Price
MahrSurf PS1 Portable
Surface Roughness Tester
Technical Data
Unit of measurement
Metric, inch
Parameters (24,
with tolerance limits)
Ra,Rq, Rz corr. to Ry (JIS), Rz (JIS), Rmax, Rp, Rp (ASME),
Rpm (ASME), Rpk, Rk, Rvk, Mr1, Mr2, A1, A2, Vo, Rt, R3z, RPc,
Rmr corr. to tp (JIS, ASME), RSm, R, Ar, Rx
Languages
Measuring range†
Profile resolution†
Cutoff Ic††
Traversing length Lt††
Traversing length (MOTIF)
Short cutoff††
Evaluation length In††
Sampling lengths††
Memory capacity
Dimensions
Weight
Battery
Interfaces
Long-range power supply
†changes automatically
P-786
14 including 3 Asian languages
350 μm, 180 μm, 90 μm, (0.014 in., 0.007 in., 0.004 in.)
32 nm, 16 nm, 8 nm, (1.3μin, 0.6 μin, 0.3 μin)
0.25 mm, 0.8 mm, 2.5 mm, automatic (0.010 in, 0.030 in, 0.100 in)
1.75 mm, 5.6 mm, 17.5 mm: automatic (0.069 in., 0.22 in., 0.69 in.)
1 mm, 2 mm, 4 mm, 8 mm, 12 mm, 16 mm (0.04 in., 0.08 in., 0.16
in., 0.32 in., 0.48 in., 0.64 in.)
Selectable
1.25 mm, 4.0 mm, 12.5 mm (0.050 in., 0.15 in., 0.50 in.)
Number n selectable: 1 to 5
Max. 15 profiles, max. 20,000 results
(5.51 in. x 1.97 in. x 2.76 in.)
(0.88 lbs)
Li-ion battery
USB, MarConnect (RS232)
100v to 264 v
††acc to ISO/JIS
The scope of delivery for the
MarSurf PS1 includes a simple
mount for height
adjustment. This enables measurements to be performed on e.g. cones.
• MarSurf PS1 base unit
• Drive unit
• 1 standard pick-up, conforms to
standards
Perfect upside
down measurement • Integrated battery
• Roughness standard integrated into
with the
casing
MarSurf PS1.
All you have to do is position the part and • Height adjustment
• Pick-up protection
start measurement. This enables small
• Charger/adapter
workpieces to be measured without
• Operating instructions
additional mounts.
• Carrying case with shoulder strap and
The MarSurf PS1
belt atachment
is the perfect
• USB cable
entry-level
measuring
instrument for
Order No. NA65-6910214
a wide range of standards-compliant
roughness measurements.
$Price
Pocket Surf® Portable
Surface Roughness Gage
Force Gaging and Accessories
G - 36
Mechanical Force Gauge–Series FB
• Ergonomic, Heavy-Duty Metal Case
• 165 lbf Overload Capacity
• Real Time and Peak Mode
• Tare Ring
•
•
•
•
o Batteries Needed
N
Mountable to Test Fixtures
Intrinsically Safe
Carrying Case and Standard Attachments Included
FB Ranges (Resolution) Accuracy: FB ±0.3% F.S
Pounds
Capacity
(Resolution)
Order No.
Newtons
Capacity
(Resolution)
Order No.
Price
10 N (0.1 N)
20 N (0.2 N)
30 N (0.25N)
50 N (0.5 N)
100 N (1 N)
200 N (2 N)
300 N (2.5 N)
500 N (5 N)
NA43-FB10N
NA43-FB20N
NA43-FB30N
NA43-FB50N
NA43-FB100N
NA43-FB200N
NA43-FB300N
NA43-FB500N
$Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Order No.
NA43-FB32OZ 1 kgf (10 gf)
NA43-FB1KG
NA43-FB2KG
NA43-FB80OZ 2 kgf (20 gf)
NA43-FB2
NA43-FB3KG
3 kgf (25 gf)
NA43-FB5
NA43-FB5KG
5 kgf (50 gf)
NA43-FB10
10 kgf (100 gf) NA43-FB10KG
NA43-FB20
NA43-FB30
NA43-FB50
NA43-FB100
NA43-FB150 (Accuracy: ±0.5% F.S.)
Optional Handle
Order No. NA43-OH1
$Price
NA43-FB10
NOTE: Reverse display units available (for use on vertical test stands, for tension applications)
High Capacity Mechanical Force Gauge–Series ESH
• Tare Ring
• Real Time and Peak Mode
• Mountable to Test Fixtures
• Carrying Case and Standard Accessories Included
(as shown)
ESH Ranges (Resolution) Accuracy: ESH ±0.5% F.S
•
•
•
•
Capacity Up to 500 lbs.
Rugged Design for Heavy Usage
Heavy-Duty Metal Construction
135% Overload Capacity
Pounds
Capacity
(Resolution)
Order No.
Kilograms
Capacity
(Resolution)
Newtons
Order No.
Capacity
(Resolution)
—
200 lbf (2 lbf) NA43-ESH200
—
—
300 lbf (2.5 lbf) NA43-ESH300 100 kgf (1 kgf) NA43-100kg 1000 N (10 N)
400 lbf (4 lbf) NA43-ESH400 200 kgf (2 kgf) NA43-200kg 2000 N (20 N)
NA43-ESH500 300 kgf (2.5 kgf) NA43-300kg 3000 N (25 N)
500 lbf (5 lb)
NOTE: Reverse display units available (for use on vertical test stands, for
Order No.
Price
—
$ Price
NA43-1000N
Price
NA43-2000N
Price
NA43-3000N
Price
tension applications)
NA43-ESH-200
Vertical Lever Stand
Horizontal Lever Stand
• Standard Compression Model
Easily Converted to Tension
• Optional Distance Meter
• Operates with a Single Downward
Lever Stroke
• Maximum Load 220 lbs.
• Stroke 4″
• Maximum Clearance 5″ (10″ with
optional AP003 extender plate)
• Both Tension and Compression
Testing
• Optional Distance Meter
• Stroke 4″
• Maximum Load 220 lbs.
• Lever Action Allows Rapid
Testing
• Large Work Area
Accommodates a
Wide Variety of
Samples
NA43-LV220S-C
NA43-LH220S
Description
Order No.
Compression Stand (gauge sold separately)
Tension Stand (gauge sold separately)
NA43-LV220C
NA43-LV220T
Compression Stand w/ Distance Meter
(gauge sold separately)
NA43-LV220SC
Price
NA43-LV220ST
Price
NA43-AP003
Price
Tension Stand w/Distance Meter
Extender plate
P-788
Price
$ Price
Price
Description
Order No.
Horizontal Lever Stand
NA43-LH220
Lever Stand w/ Distance Meter
NA43-LH220S
Price
$ Price
Price
32 ozf (0.25 ozf)
80 ozf (1 ozf)
2 lbf (0.02 lbf)
5 lbf (0.05 lbf)
10 lbf (0.1 lbf)
20 lbf (0.2 lbf)
30 lbf (0.25 lbf)
50 lbf (0.02 lbf)
100 lbf (1 lbf)
150 lbf (1 lbf)
Kilograms
Capacity
(Resolution)
Force Gaging and Accessories
G - 37
Digital Torque Screwdriver DSD-4, Wrench DSW-20
•
•
•
•
•
•
•
•
•
•
•
Ergonomic, lightweight, rugged construction
lbf-in, ozf-in, kgf-cm, N-cm, and N-m available
Peak, Real Time and Peak Down modes (selectable)
Drive centered torque sensor gives consistent readings no
matter where the wrench is gripped.
Programmable high/low setpoints with audible beep
Capacity (Resolution)
Model
Price
and LED indicator for GO/NO GO testing
NA43-DSD4
0.30 – 35.00 lbf-in
$Price
400 Data memory for recall or download
NA43-DSD4OZ
3.0 – 560.0 ozf-in
Price
NA43-DSD4KG
0.30 – 40.00 kg-cm
Price
Programmable auto zero function and counter
NA43-DSD4CN
3.0 – 400.0 N-cm
Price
RS-232 output for SPC capability
NA43-DSD4N
0.03 – 4.000 N-m
Price
Accuracy: ± 0.5% F.S., ±1 LSD
NA43-DSW20
3.0 – 180.0 lbf-in
Price
NA43-DSW20KG
3.0 – 200.0 kgf-cm
Price
CW and CCW operation
NA43-DSW20CN
0.30 – 20.00 N-m
Price
AC charger, stepless one-way
Imada
Data
Acquisition
software
collects
peak
data
for
clutch and carrying case included
DSD-4
Any 1/4" hex bits can be used.
Drive Centered
Torque Sensor
analysis from DSD-4 and DSW-20.
DSW-20
3/8" drive, head swivels 300°
• Both Push and Pull
• Lbf, Kgf and N (selectable)
• Exceptional Quality at Affordable Prices
• Real-Time and Peak Modes (selectable)
• Ergonomic, Heavy-Duty Metal Case
•C
arrying Case, Standard Attachments and
AC Adapter/Charger Included
• Outputs: RS-232, Digimatic, Analog
DPS Ranges (Resolution) Accuracy: ±0.2% F.S. ±1 LSD
Pounds (Ounces)
Kilograms (Grams)
Model Newtons
8.819 ozf (0.001 ozf)
17.64 ozf (0.01 ozf)
4.409 lbf (0.001 lbf)
11.02 lbf (0.01 lbf)
44.09 lbf (0.01 lbf)
110.2 lbf (0.1 lbf)
220.5 lbf (0.1 lbf)
1102 lbf ( 1 lbf)
250.0 gf (0.1 gf)
500.0 gf (0.1 gf)
2.000 kgf (0.001 kgf)
5.000 kgf (0.001 kgf)
20.00 kgf (0.01 kgf)
50.00 kgf (0.01 kgf)
100.0 kgf (0.1 kgf)
500.0 kgf (0.1 kgf)
2.452 N (0.001 N)
4.903 N (0.001 N)
19.61 N (0.01 N)
49.03 N (0.01 N)
196.1 N (0.1 N)
490.3 N (0.1 N)
980.6 N (0.1 N)
4900 N (1 N)
Order No.
DPS-1
Price
NA43-DPS05
NA43-DPS1
NA43-DPS4
NA43-DPS11
NA43-DPS44
NA43-DPS110
NA43-DPS220
NA43-DPSH1100
$Price
Price
Price
Price
Price
Price
Price
Price
OH-1 Optional Handle $85.00
Model DPSH
includes handles
NOTE: Use an “R” suffix for reverse display units (for use on vertical test stands)
Digital Force Gauge with Outputs—Series DPS
Data Acquisition Software
• Full SPC and Graphing Capabilities
• Designed for Imada Gauges
• Automates Your Data Collection
Use SW-1 to capture and display the current value and
calculate max/min, average, and standard deviation. Use
buttons on the spreadsheet to operate the gauge from your
computer.
The optional DB-1 data button works with SW-1 software to
further automate data acquisition. Enter peak measurements
into the spreadsheet and ‘zero’ the gauge with just a touch
of the button. Save unnecessary time at the computer and
gauge for more efficient testing.
Description
SW-1 Data Acquisition Software
Data Button (for DPS only)
Order No.
NA43-SW1
NA43-DB1
Price
$Price
Price
DB-1
SW-1
PC WITH SW-1 OR OTHER
DATA ACQUISITION SOFTWARE
IMADA
GAUGE
RS232
CABLE
SERIAL
CABLE
DB-1
P-789
Hardness Testers
G - 38
Analog Bench Hardness Tester
Reliability & Value
The Starrett 3814 provides reliable Rockwell Hardness values on all types of metal and
alloys, hard or soft, and in many shapes. This reliable bench hardness tester has a high
quality casting, is ergonomically designed for easy operation, and is engineered to ensure
accurate results.
The tester is furnished with a diamond indentor, a ¹⁄₁₆″ ball indentor, three certified test
blocks (one each: HRA, HRB and HRC), three test tables: 5.87″ (150mm), flat anvil 2.5″
(63mm and spot anvil .38″/10mm), a standard vee anvil, accessory case and dust cover.
$Price
Digital Bench Hardness Tester
Fully Automated Hardness Testing
The microprocessor controlled Starrett 3816 bench hardness testers offers easy, fully
automated testing procedures and provides highly sensitive and accurate readings.
The tester is furnished with a diamond indentor, ¹⁄₁₆″ ball indentor, three certified test
blocks (one each: HRA, HRB, HRC), three test tables: 5.87″ (150mm), flat‑ anvil 2.5″
(63mm and spot anvil .38″/10mm), a standard vee anvil, accessory case and dust cover.
Technical Specifications:
Minor load . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10Kgf
Major load . . . . . . . . . . . . . . . . . . . . . . . . . . . . A:60Kgf, B:100Kgf, C:150Kgf
Test force application . . . . . . . . . . . . . . . . . . . . (Dead weight applies test force)
Test force control . . . . . . . . . . . . . . . . . . . . . . . Motorized
Results display . . . . . . . . . . . . . . . . . . . . . . . . Digital readout
Throat depth . . . . . . . . . . . . . . . . . . . . . . . . . . 6.6″ (168mm)
Maximum test height . . . . . . . . . . . . . . . . . . . . 6.69″ (169.9mm)
Unit height/width/depth . . . . . . . . . . . . . . . . . . 28 × 8.9 × 19.6″ (711 × 226 × 498mm)
Unit weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . 187 lbs. (85kg)
Features:
• Automated routines reduce operator
involvement and speed measurement
• LED panel displays proper load setting
• Programmable scale conversions,
dwell times and tester counter
• Sample averaging is automatically
calculated
• RS-232C output
• Convenient mini printer for
outputting readings
$Price
Minor load . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10Kgf
Major load . . . . . . . . . . . . . . . . . . . . . . . . . . . . A:60Kgf, B:100Kgf, C:150Kgf
Test force application . . . . . . . . . . . . . . . . . . . . (Dead weight applies test force)
Test force control . . . . . . . . . . . . . . . . . . . . . . . Hydraulic dashpot system
Results display . . . . . . . . . . . . . . . . . . . . . . . . Analog – dial gage
Throat depth . . . . . . . . . . . . . . . . . . . . . . . . . . 6.6″ (168mm)
Maximum test height . . . . . . . . . . . . . . . . . . . . 6.69″ (169.9mm)
Unit height/width/depth . . . . . . . . . . . . . . . . . . 30 × 8.5 × 20″ (762 × 216 × 508mm)
Unit weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . 187 lbs. (85kg)
Features:
• Ability to handle Rockwell Scales A
through H and K
• Stable cast iron construction
• Ideal basic hardness testing for
many typical applications
• Economically priced
Automated Digital Hardness Testing System
Capable of measuring all Rockwell, Rockwell
Superficial, Vickers†, and Brinell†, Scales,
it meets or exceeds all major industry stan‑
dards requirements, offering unsurpassed
accuracy, reliability and overall performance.
Minor load . . . . . . . . . . . . . . . . . . . . . . . 10 kg
Minor load – Superficial . . . . . . . . . . . . . 3 kg
Major load . . . . . . . . . . . . . . . . . . . . . . . 60/100/150 kg
Major load – Superficial . . . . . . . . . . . . . 15/30/45 kg
Test force control . . . . . . . . . . . . . . . . . . Motorized
Results display . . . . . . . . . . . . . . . . . . . Digital readout
Throat depth . . . . . . . . . . . . . . . . . . . . . 5¹⁄₂″
Maximum test height . . . . . . . . . . . . . . . 10″
Unit height/width/depth . . . . . . . . . . . . . 33¹⁄₄″ × 8″ × 19³⁄₄″
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . 185 lbs.
†Requires separate equipment to measure across indent
P-792
Features:
• One-touch automated testing with minimal operator involvement
• Closed-loop NTEP load cell technology improves repeatability
and efficiency, while eliminating conventional weights method
• Preset dwell times and automatic cylindrical correction for hard‑
ness value comply with ASTM E 18 tolerances
• Hardness numbers are displayed from 1 to 1/100th point on an
easy-to-use, easy-to-view, digital control panel
• Built-in electronic conversion charts for cross referencing hardness
scales and approximating tensile strength – no mechanical or elec‑
tronic adjustments required
• Meets or exceeds new ASTM and ISO requirements,
and meets Direct NIST Traceability requirements
• RS-232C output
• Detachable clamping device for oversized or irregular parts
• Self-contained head assembly adaptable for special applications
• Upper and lower limit alarms
• Includes detachable clamping device, direct verification certificate
for load, depth, hysteresis and timing, indirect verification certificate
for B, C, 30N and 20T scales, operator manual,
indentor installation tool, and AC power cable
• 2-Year limited warranty
• Made in the U.S.A
Price on Application
Bench Centers
G - 39
Large Capacity Bench Centers
“Heavy base provides extra stability
for large workpieces”
• Accuracy: Less than .00015 runout
• Chart supplied with each instrument
• Adjustable gibs
• Adjustable indicator holder included
• Made by one of the world’s largest manufacturers
Why pay for a Bench Center,
then pay from $100.00 to $150.00
for Riser Blocks for larger diameter workpieces?
Maximum
Diameter
OAL
Order No.
Price
16″
30″
12″
19″
27¹₂″
47″
MV50-1
MV50-2
$Price
Price
Indicator NOT Included
Above have No. 2MT Taper Centers
Instrument Bench Centers
TAFT • PEIRCE
• Can be used in either the vertical or horizontal position
• Head and tailstock made from high-quality alloy steel and heat-treated for maximum stability
• Center point of headstock can be rotated within ±.0015″ eccentric range of adjustment bringing
the piece perfectly parallel to surface
• Shaft made of chrome-plated tubular steel, 1-1/8″ O.D.
• Centers are parallel to base within ±.002″ and square within ±.0003″ per 6″
Overall Dimensions
• Available in finished wood case
• 3/8″ × 60° hardened and ground tool steel centers
L
• Tailstock center is spring-loaded, lockable with knurled knob
W
H
12-1/4″ 3-1/2″ 3-5/8″
Maximum Work
Capacity
Between
Centers
Diameter
Approx.
Wt.
Order No.
Price
8″
3″
6-1/4 lbs.
NJ65-9203
$Price
Intermediate Bench Centers
• Designed to bridge the capacity gap between the TP Model 9203 Instrument
Bench Center and the standard 9208 8″ swing models
• Can be used in either the vertical or horizontal position
Center
Distance
• Head, tailstock and base made from close-grained, heat-treated cast iron
• Center point of headstock can be rotated within ±.0015″ eccentric range of
adjustment, bringing the piece perfectly parallel to surface
• 1/2″ × 60° Hardened and ground tool steel centers
• Tailstock center is spring-loaded, lockable with knurled knob
Overall Dimensions
• Parallel to base within ±.0002″ and square within ±.0003″ per 6″
• Available in finished wood case
L
W
H
17-3/4″
5″
5-5/8″
Maximum Work
Capacity
Between
Centers Diameter
12″
5″
Approx.
Wt.
Order No.
Price
26 lbs.
NJ65-9204
$Price
Order No.
Price
Standard Bench Centers
• Heavy-duty, cast iron beds are ruggedly proportioned with internal ribbing
• Head and tailstock made from close-grained cast iron, each with 3/4″ × 60°
center. Morse #2 taper.
• Head and tailstocks machined in pairs and parallel to bed within .0005″
• Alignment of head and tailstock maintained by keys in 1/2″ t-slot in bed
• Tailstock center head in lockable, spring-loaded sleeve
• Beds have four adjustable leveling buttons
• Top surface of beds precision ground, flat within limits shown in table
Overall Dimensions
• Optional sizes of head and tailstock are available
• Mounting, bracket and dial indicator available as an option
• Standard bench centers are supplied complete with ground bed, headstock, tailstock and centers.
L
30″
48″
80″
W
H
5-1/2″ 11-1/2″
5-1/2″ 12″
7″
17″
Maximum Work
Capacity
Bed
Between
Approx.
Centers Diameter
Wt.
18″
36″
66″
8″
8″
16″
(Flatness
of Top
Surface)
108 lbs. 0.0005″
170 lbs. 0.001″
625 lbs. 0.0015″
NJ65-920518
NJ65-920536
NJ65-920580
$Price
Price
Price
P-795
Gage Block Sets
G - 40
Gage Block Sets Available in Premium – Certified and Economy Sets
36-Pc. Sets Include:
Rectangular Block Sets
• 2
• 9
• 9
• 9
• 3
• 3
• 1
• 1
• All gage block sets are assigned serial numbers and certificate of grades and tolerances
• Premium certified sets come with traceable certification and deviation chart
• Economy set comes with non-traceable certificate only
• 9 Blocks – .1001″ thru
• 4 Blocks – 1.000″ thru
• 1 Fitted wooden case
Square Gage Block Sets
.1009″ step of .0001″
.149″ step of .001″
.950″ step of .050″
4.000″ step of 1.000″
8-Pc. Sets Include:
• 1 Each – 5″, 6″, 7″, 8″, 10″, 12″, 16″ and 20″
Material
No. of Pieces
Grade
Order No.
Steel
Steel
Steel
Steel
Carbide
36
36
81
81
81
B
2
B
2
2
NB60-2672060CT
NB60-2672062CT
NB60-2672065CT
NB60-2672066CT
NB60-2672CAR2CT
Price
$ Price
Price
Price
Price
Price
Square Gage Block Sets – Certified NIST Traceable
Material
No. of Pieces
Grade
Order No.
Steel
Steel
81
81
B
2
NB60-2672SQCT
NB60-2672SQ2CT
Price
$ Price
Price
Long Rectangular Gage Block Sets – Certified NIST Traceable
Material
No. of Pieces
Grade
Order No.
Price
Steel
8
2
NB60-2672LONGCT
$Price
•Tolerances to .00005″
• Certificate of inspection included
•Inspected according to meet NIST Federal Specification ASME B89. 1.9 - 2002 tolerances on length for inch gage blocks
• 36 blocks
• Ground hardened and tapped
• 4 Connection screws included
• Includes shop hardened fitted case
Economy Gage Block Sets
Rectangular Gage Block Sets
Material
No. of Pieces
Grade
Order No.
Price
Steel
Steel
Steel
Steel
Carbide
Carbide
Ceramic
36
36
81
81
81
81
81
B
2
B
2
B
2
2
NB60-2672060
NB60-2672062
NB60-2672065
NB60-2672066
NB60-2672CARB
NB60-2672CAR2
NB60-2672CER2
$ Price
Price
Price
Price
Price
Price
Price
Price
Square Gage Block Sets
Material
No. of Pieces
Grade
Order No.
Steel
81
B
NB60-2672SQ
$Price
36-Pc. Millionths Space Block Set (Inch)
³⁄₄″ Diameter with ¹⁄₄ - 28 I.D. thread, ground, hardened
and lapped. 4 Connecting screws included to form any
length desired.
Consists of the following sizes:
• 9 Blocks – .101″ thru .109″ by .001″
• 15 Blocks – .050″ thru .190″ by .010″
• 9 Blocks – .200″ thru 1.000″ by .100″
• 1 Block – .0625″
• 1 Block – .125″
• 1 Block – 1.000″
50 Millionths 36 Pc. Space Block Set (Incl. Cert. of Conformance)
Order No. GG45-16101 • $Price
P-800
Economy 36-Pc. Round Gage Block Set (±.0002 Accuracy)
Order No. NF80-PR1 • $ Price
• 1 Block – .050″
• 10 Blocks – .100″ thru .1009″ by .0001″
• 49 Blocks – .101″ thru .149″ by .001″
• 17 Blocks – 150″ thru .950″ by .05″
• 4 Blocks – 1.000″ thru 4.000″ by 1.000″
Premium certified sets are certified in the
U.S. by a 17025 certified lab
Long Rectangular Block Sets
Premium – Certified Sets in Premium Case
Rectangular Gage Block Sets – Certified NIST Traceable
Blocks – .1000″ and .1005″
Blocks – .1001″ thru .1009″ step of .0001″
Blocks – .200″ thru .300″ and .500″
Blocks – 1.000″, 2.000″ and 4.000″
Block – 0.10005″
Fitted wooden case
Radius Gages
Radius Gage Sets
Radius Gages
SETS
No. of
Leaves
Size (inches)
¹⁄₆₄ to¹⁷⁄₆₄ by
64ths & ⁹⁄₃₂ to
¹⁄₂ by 32nds.
¹⁄₆₄ to¹⁷⁄₆₄ by
by 64ths
⁹⁄₃₂ to ¹⁄₂
by 32nds
.010-.030 by .005
.040-.100 by .010
.120-.300 by .020
.350-.500 by .050
.550 to 1 by .050
25
17
8
26
10
Order No.
Price
MT80-186-901
$Price
MT80-186-903
Price
MT80-186-904
Price
MT80-186-906
Price
MT80-186-907
Price
Order No.
Price
¹⁄₆₄
¹⁄₃₂
³⁄₆₄
¹⁄₁₆
⁵⁄₆₄
³⁄₃₂
⁷⁄₆₄
¹⁄₈
⁹⁄₆₄
⁵⁄₃₂
¹¹⁄₆₄
³⁄₁₆
¹³⁄₆₄
MT80-201441
MT80-201442
MT80-201443
MT80-201444
MT80-201445
MT80-201446
MT80-201447
MT80-201448
MT80-201449
MT80-201450
MT80-201451
MT80-201452
MT80-201453
$Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Radius
(Inches)
Order No.
Price
⁷⁄₃₂
¹⁵⁄₆₄
¹⁄₄
¹⁷⁄₆₄
⁹⁄₃₂
⁵⁄₁₆
¹¹⁄₃₂
³⁄₈
¹³⁄₃₂
⁷⁄₁₆
¹⁵⁄₃₂
¹⁄₂
MT80-201454
MT80-201455
MT80-201456
MT80-201457
MT80-201458
MT80-201459
MT80-201460
MT80-201461
MT80-201462
MT80-201463
MT80-201464
MT80-201465
$ Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Radius Gage Sets
Made of stainless steel with no-glare satin
finish. Individual gages permit each gage to
be used separately for greatest accuracy and
convenience.
Each gage is marked with its radius and has five
different gaging surfaces for both convex and
concave radii. Available with handy gageholder
for checking radii in hard-to-reach locations. All
sets furnished in attractive, protective case.
Gages
Per
Set
S167AZ
S167AHZ
S167BZ
S167CZ
S167CHZ
S167DZ
S167MAZ
S167MAHZ
16
17
8
24
25
16
13
14
S167MCZ
21
S167MCHZ
22
S167MDZ
SD167FHZ
SD167GZ
110
15
19
26
—
S167CHZ
P-868
25
Order No. NB67-L300CX
$Price
Order No. NB67-L300E
$Price
Angle Gage Set
• 18 Individual gages for easy use.
• 8 Gaging surfaces per gage.
• Each gage checks primary,
¹₂ primary and complementary
angles.
• Quick and accurate inspection of
angles and I.D. or O.D. chamfers
• Inspecting angles on ground form
tools and cutters.
5° to 90° by
5° increments
Radius Gage Sets —
Decimal and Fractional
Range, Radii
Order No.
Price
¹⁄₃₂ to ¹⁷⁄₆₄″ by 64ths
¹⁄₆₄ to ¹⁷⁄₆₄″ by 64ths
⁹⁄₃₂ to ¹⁄₂″ by 32nds
¹⁄₃₂ to ¹⁷⁄₆₄″ by 64ths and ⁹⁄₃₂ to ¹⁄₂″ by 32nds
¹⁄₆₄ to ¹⁷⁄₆₄″ by 64ths and ⁹⁄₃₂ to ¹⁄₂″ by 32nds
¹⁄₃₂ to ¹⁄₂″ by 32nds
1mm to 7mm by 0.5mm
0.5mm to 7mm by 0.5mm
1mm to 7mm by 0.5mm and
8mm to 15mm by 1mm
0.5mm to 7mm by 0.5mm and
8mm to 15mm by 1mm
1mm to 15mm by 1mm
.020 to .500″
.010 to .500″
Holder Only
MV70-50615
MV70-50616
MV70-50617
MV70-50618
MV70-50619
MV70-50620
MV70-55817
MV70-55818
$ Price
Price
Price
Price
Price
Price
Price
Price
MV70-55820
Price
Gages
Starrett
Per
No.
Set
25-Piece Set (with holder)
¹₆₄″ thru ¹⁷₆₄″ by 64ths
⁹₃₂″ thru ¹₂″ by 32nds
Order No. NB67-L300AG • $Price
Individual Gages with or without Holder.
Available Price on Application
Starrett
No.
• All sets have stainless steel,
hardened, satin chrome clad finish
• Each blade marked with size
• Plastic case included
8-Piece Set (with holder)
⁹₁₆″ thru 1″ by 16ths
Individual Gages
Radius
(Inches)
G - 41
MV70-55821
Price
MV70-55822
MV70-63460
MV70-63433
MV70-50475
Price
Price
Price
Price
Individual blades have five
measuring locations for exterior
and interior radii. Measuring
surfaces are precisely machined
for high accuracy.
Available in fractional or decimal
increments, individually and in sets.
51247
Number
of Gages
24
25
26
Range, Radii
Order No.
Price
¹⁄₆₄ to ¹⁷⁄₆₄″ by 64ths and ⁹⁄₃₂ to ¹⁄₂″ by 32nds
MV70-66876
$Price
Range of Sizes
¹₃₂ thru ¹⁷⁄₆₄″ by 64ths
⁹₃₂ thru ¹⁄₂″ by 32nds
¹⁄₆₄ thru ¹⁷⁄₆₄″ by 64ths
⁹₃₂ thru ¹⁄₂″ by 32nds
.010 thru .030 by .005
.040 thru .100 by .010
.120 thru .300 by .020
.350 thru .500 by .050
Order No.
Price
MV45-51247
$Price
MV45-51246
Price
MV45-51245
Price
Radius Gage Holder available separately
Set-Up Tooling
G - 42
5″ Value Line Sine Bar
Quickly measure the desired angle in a machine setup. Hardened and precision ground. 1″ body size. 5″ distance
between centers of rolls within .0003″. Top parallel to bottom of rolls within .0002″. Supplied with back plate.
Order No.
Price
Order No.
Price
NA55-52455035
$Price
MV45-26986
$Price
5″ Sine Bar Set
Set Includes:
• (1) 5″ Sine bar hardened and ground and parallel top to bottom of rolls within .0002″
• (18) Blocks with a range of 1/2° to 15° resulting angle, including two blocks providing
“Taper-per-foot” of 1/4° and 1/2°
• Exact constant within .0001″
Order No.
Price
Order No.
Price
NA55-52455050
$Price
MV45-27264
$Price
Ultra Precision 12 Piece Angle Block Set
Ideal for Production and Inspection Applications
Features:
• Made from hardened steel, precision ground
• Angular accuracy .0001″ per inch
±30 arc seconds
• 3″ long × 1/4″ thick
Order No.
Price
NA55-52666777
$Price
• Simple, quick angle set-ups
• Includes a shop hardened molded case
• Avoid errors by eliminating calculations
• Complete Set of 12 Blocks: 1/4°, 1/2°, 1°, 2°,
3°, 4°, 5°, 10°, 15°, 20°, 25°, 30°
Order No.
Price
MV45-26883
$Price
17 Piece Precision Angle Block Set
Get quick set-ups for grinding various angles
from 1/4° to 45°. Just load on vise and rest the
workpiece at any angle you choose. Eliminates
time wasted dressing an angle in a grinding
wheel — then dressing it flat again later! Made
from hardened steel and supplied in a fitted
wooden case.
Accuracy: .0003″
Complete Set of 17 Blocks:
1/4°, 1/2°, 1°, 2°, 3°, 4°, 5°, 10°, 15°, 20°,
25°, 30°, 35°, 40°, 45° and 2 riser blocks.
B&S No.
Description
Order No.
Price
599-921-17
1/4° to 45°
MV45-26693
$Price
Planer and Shaper
Gage with Level
Planer and Shaper Gages are designed and manufactured for fine gage
work in addition to use on planer, shaper and other machine setups. All
working surfaces are precision ground and held to close tolerances. Base
is 5¹₄ inches long; ³₄ inches wide and well balanced so as to avoid tipping
action when setting to a cutting tool.
A 3-inch extension with knurled grip is furnished with each gage giving a
range of ¹₄ inch to 9¹₄ inches.
A level is provided in the base for
machine setups and gage work.
P-856
Range
Base Size
Extension
¹₄ to 9¹₄″
5¹₄″ long × ³₄″ wide
3″
Order No.
NC52-NPG599
$Price
Precision Tri-Blocks
G - 43
• Made of hardened steel, ground on al six sides
Precision Tri-Blocks
• Available as single blocks or in matched pairs, per chart
• B-123-H1-M Has one 1/2″ through hole in 2″ × 3″ face
• 11-Hole models have 5/16-18 tapped holes
• 23-Hole models have 3/8-16 tapped holes
• All models except PB123, furnished in fitted wooden boxes
•B
-123-H11-M, B-123-H23M, B-234-H23-M & B-246-H23-N have
drilled, counterbored & tapped holes to allow screw mounting
and conversion into angle plates & other precision set-ups.
Pair or Single
Holes
Square
Weight
Pair
1
0.0001″ per in.
3 lbs.
NJ50-BB123H1M
Order No.
$Price
Price
1 × 2 × 3 ±0.0001″/0.0003″
Pair
11
0.0001″ per in.
3 lbs.
NJ50-BB123H11M
Price
1 × 2 × 3 ±0.0001″/0.0003″
Pair
23
0.0001″ per in.
3 lbs.
NJ50-B123H23M
Price
1 × 2 × 3 ±0.0001″/0.0003″
Pair
NONE
0.0001″ per in.
3 lbs.
NJ50-B123NHM
Price
2 × 3 × 4 ±0.0001″/0.0003″
Pair
23
0.0001″ per in.
12 lbs.
NJ50-B234H23M
Price
2 × 4 × 6 ±0.0001″/0.0003″
Pair
23
0.0001″ per in.
19 lbs.
NJ50-B246H23M
Price
1 × 2 × 3 ±0.0001″
Single
NONE
0.0002″ total
2 lbs.
NJ50-PB123
Price
Ultra Precision Ground 1-2-3 Blocks
Ideal for Precision Layout & Setup
•1
Pair of each: 1-2-3,
2-4-6 or metric sizes
• Hardened 55 to 62 HRC
• Tolerance .0003″
to .0005″/
.005mm-.010mm
Each set consists of a matched pair of 1 × 2 × 3″ blocks, five
³⁄₈,-16 stainless steel socket head cap screws, hex key, and
shop-hard-molded case.
Features:
• Each block precision ground on all six surfaces
• Case hardened (HRC 55–60)
• Surface finish from 6 to 16 microinches
• Squareness on all sides to within .0001″
• 23 holes: 5 tapped ³⁄₈,-16″; 18 untapped
thru holes
• The cross drilling is designed to give minimum
weight yet maximum strength
• Oversized to allow for nominal
.0001–.0003″
Order No.
Price
Order No.
Price
Order No.
Price
NM52-PR123
$Price
NA55-52439032
$Price
MV45-26764
$Price
Universal 1-2-3 Block Set
Consists of a matched pair of 1 × 2 × 3″ blocks, five zinc
plated ⁵⁄₁₆-18 socket head cap screws and a hex key wrench.
Features:
• Each block precision ground /case hardened on all six sides
• Surface finish from 6 to 16 microinches
• Squareness on all sides to within .0001″
• 11 holes on three faces: 5 holes tapped
for holding down or conversion to an
angle plate. 6 holes drilled through with
deep recesses for easy clamping.
• Oversized to allow for nominal lapping
up to .0003″
• Complete with protective “shop-hardened” molded case
B&S No.
Description
Order No.
Price
599-750-50
Universal 1-2-3 Block Set
MV45-27396
$Price
Type
Order No.
Price
1″-2″-3″
2″-4″-6″
25-50-75MM
NM52-E123
NM52-PR246
NM52-E25M
$ Price
Price
Price
Size (Inches)
1 × 2 × 3 ±0.0002″
One Hole Steel
1-2-3 Blocks
• Tolerance: .0001″
(squareness per inch)
• Dimensions: 1″ x 2″ x 3″
• Hardened to 58-60
Rockwell C
• Matched accuracy
within .0002″ per inch
Order No. NA55-52439001 •
$Price
P-803
Granite Surface Plate Accessories
G - 44
Surface Plate Stands
Stands with Level Screws or
Casters and Floor Lock.
Toolmaker’s Flats
Surface plate
not included.
Sturdy Felt Lined Case for Surface
Plate Covers
12″ long 8″ wide 2″ high
• Heavy gage reinforced angle iron
• Built to hold six times the weight of the surface plates
• Overall working height 36″
Specify the Amount of “Lips” or “Ledges” and
Brand of Plate When Ordering Your Stand.
Other Sizes Available.
Size
Weight Stand with Level Screws
(lbs.)
Order No.
Price
Stand with Casters†
Order No.
Price
NT50-12180
$Price NT51-12180
$Price
NT50-18240
Price NT51-18240
Price
NT50-24240
Price NT51-24240
Price
NT50-24360
Price NT51-24360
Price
NT50-24480
Price NT51-24480
Price
Weight
Plate Size
Order No.
Price
NT50-36480 —
Price
—
(lbs.)
NT50-36600
—
Price
—
NS50-C1824S
18″ × 24″
54
$Price
NT50-36720
—
Price
—
NS50-C2436S
24″ × 36″
110
Price
NT50-48480
—
Price
—
NS50-C3648S
36″ × 48″
150
Price
NT50-48600
—
Price
—
For larger size plates use NT50 Series
NT50-48720
—
Price
—
NT50-48960
—
Price
—
casters available call for price and delivery. USA Stands are made to order.
Surface Plate Stands
Stationary and Rolling
Stationary Stand
Surface Plate Weight
Size (in.)
(lbs.)
18 × 24
24 × 24
24 × 36
30 × 48
36 × 36
36 × 48
36 × 60
36 × 72
48 × 72
48 × 96
F.O.B. Factory.
70
80
100
110
130
116
124
175
200
220
Order No.
NS60-82000
NS60-82004
NS60-82006
NS60-82012
NS60-82016
NS60-82018
NS60-82020
NS60-82022
NS60-82028
NS60-82032
Granite Surface
Plate Cleaner
Size
Order No.
Size
Order No.
NS60-81823
Order No.
Crystal Pink
Black
NS60-81803
NS60-81802
Price
$Price
Price
Supports Twice
the Weight
of the Plate
Unique
Bolt-Type
Assembly
No Welding
Rolling Stand
Price
$Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Weight
(lbs.)
Order No.
75
85
110
119
135
127
153
200
310
NS60-82001
NS60-82005
NS60-82007
NS60-82013
NS60-82017
NS60-82019
NS60-82021
NS60-82023
NS60-82029
Price
$Price
Price
Price
Price
Price
Price
Price
Price
Price
Long-Wearing
Baked
Enamel Finish
Leveling Screws
or Casters
Steel stand for surface plates
24″ × 36″ and smaller
Steel stand for surface plates
30″ × 48″ and larger
They are structurally engineered to support twice the weight of the plate
with ample safety factor—yet are shipped knocked down for easy on-site
assembly with carriage bolts (included) and a single wrench.
•S
trong vinyl material with
soft cloth lining
• Protects surface plate
from dust
• Fits snugly over top of
standard size surface
plates
Price
NB75-Z9412 $Price
NB75-Z9406 Price
NB75-Z9407 Price
NB75-Z9408 Price
NB75-Z9409 Price
NB75-Z9410 Price
1 Gallon
$Price
Type
Surface Plate Covers
Special formulation designed
to work in all QC environments.
Hazard Code: 57
16 oz
Pt. Spray Pump
Quart
¹₂ Gallon
1 Gallon
5 Gallon
Order No. NS60-81804
12 × 18
77
18 × 24
93
24 × 24 102
24 × 36 115
24 × 48 128
36 × 48 166
36 × 60 225
36 × 72 245
48 × 48 235
48 × 60 255
48 × 72 265
48 × 96 300
†Larger sizes with
USA Shown
Price
$Price
Size
Order No.
Price
Size
Order No.
Price
12 × 18
18 × 18
18 × 24
24 × 24
24 × 36
30 × 48
NS60-83002
NS60-83003
NS60-83004
NS60-83005
NS60-83006
NS60-83007
$Price
Price
Price
Price
Price
Price
36 × 36
36 × 48
36 × 60
36 × 72
48 × 72
48 × 96
NS60-83009
NS60-83008
NS60-83012
NS60-83013
NS60-83010
NS60-83011
$ Price
Price
Price
Price
Price
Price
P-805
Tachometers, Torque Meters, & Calculators
Analog Sound Meter
Digital Sound Meter
Digital display with analog bar graph
• Auto or manual ranging
• A and C weight selectable
• Fast or slow response selectable
• Min/max record with maximum hold
• Auto power off
• Low battery indicator
• Large digital display
• Range: 40 to 130 dB in 10 steps
• Accuracy: +/-2 dB
• Resolution: 0.1 dB
• Sensor: 10mm electret condenser microphone
• Power source: 4 “AAA” batteries
• Dimensions: 9" x 2.25" x 1.73"
Order No.
• Includes Windscreen, batteries
G - 45
• Built-in .5″ electret microphone
• Fast or slow response settings
• Max hold select switch
• A and C weighting selectable
• Analog output for connection to chart
recorders, data loggers etc.
• Easy calibration adjustment
Specifications:
• Range: 54 to 126 dB in 7 ranges (manual)
• Accuracy: ±3 dB
• Power source: 1 “9-volt” battery (included)
NB49-DSM8928
Order No. NB49-ASM8926
$Price
$Price
Versa-Stand™
• Versatile instrument stand
on powerful magnet
• Great multimeters and more
• Includes Velcro®
• Versatile hook on a heavy
duty 2¹⁄₂″ dia. magnet
• Great for blo-guns, hand
tools, work lights and
more
• Assembles up or down
Order No. NL80-20301
Patent pending
$Price
Order No. NL80-20200
$Price
Machining Calculator
CncGcoder® HD
• Liquid resistant, dust resistant,
shock resistant, and drop resistant.
• Make quick program edits with the
built-in, CNC-style keyboard.
• Save programs with descriptive
names and organize into multiple
folders and directories.
• Quickly back-up all your machine’s
programs and parameters. Use as
a back-up for your DNC network.
• Safely store programs on SD Cards
or the OnBoard Flash drive for
secure, non-volatile storage.
• Easily transfer files between your
CNC and PC. Handheld files are
PC-compatible; no conversion
software is needed. The G-Code
programs display on the screen.
• Set-up and save the
communication settings for every
machine.
Guaranteed
1 Year Warranty
Standard Equipment:
• Handheld with CncGcoder® software installed
• Heavy-duty RS-232 serial cable
• Power supply for rechargeable battery
(SD Card Readers, SD Cards, and ActiveSync® cable
sold separately)
Order No. MS25-HD100
$Price
Don’t waste time on mathematical
computations, the Pro/Calc does it for you!
Easy to use—simply select:
• Material to be machined
• Operation to be performed
• Tool diameter to be used
• Number of cutting tools
• Recommended RPM and Feed rate are
automatically displayed
• Runs on (1) 9 volt battery (included)
Order No. MS37-PROCALC
$Price
Machine Shop Calculator
This pre-programmed
calculator contains over
60 basic machine shop
functions. Includes basic
shop formulas, basic and
advanced mill & lathe
formulas, distributor pricing
formulas, trig functions.
Even estimates time, costs
and savings.
Over 60 Basic
Machine Shop
Functions
Order No. MS37-MSC123
$Price
P-809
Electrical Test Equipment
Analog
Multi-Meter
• Fuse & diode protected
• AC/DC volts to 500V
• 0-250mA
Resistance
• 0-100 Ohms, 18 ranges
• Self-storing leads
• Dimensions: 4″ × 2.5″ × .75″
• Single knob function
Order No. NB49-AM35UL
• Auto ranging
• Volts: AC/DC to
450V
• Amps to 450mA
• Resistance to 30M
• Continuous beep,
bar graph
• Diode test, data hold
• Dimensions: 4.125 × 1.75″ × .25″
• Auto power OFF
• Analog bar graph
• Battery & case
included
• Single lead hot side identification with red LED
• AC Volts to 750V
• DC Volts to
1000V
• DC Current to 200ma
• Ohms 200Ω to 2MΩ
• 9-Volt battery & test leads included
Order No. NB49-DMM333UL
$Price
Digital Service
Multimeter
Digital
Multimeter
• Micro amps for FSG
measurement
• Jumbo 3-1/2 digit display
• Protective boot with tilt stand
• ACV: 200mV to 750V
• DCV: 200mV to 1,000V
• ACA: 200µA to 10A
• DCA: 20µA to 10A
• Ohms: to 200MΩ
• Includes rubber holster, battery and carrying strap
• 7 Functions, 20 Ranges
• Small Pocket Size
• Ranges and Accuracy:
• AC Voltage: 0-200/600 Vac, ± 2.5%
• DC Voltage: 0-200mV/2/20/200/600 Vdc, ± 2%
• DC Current: 0-2000µA/20m/200mA/10Adc, ± 1%
• Resistance: 0-200/2k/20k/200k/2M/20MØ, ± 1.5%
• Includes: Battery Test, Diode Test, Continuity
Buzzer
Order No. NB49-DMM51FSG
$Price
Order No. NB49-DMM830HS
$Price
Screwdriver Tester
Order No. NB49-DMM20UL
$Price
• Bright red LED
• Self-test
• AC voltage test 70 to 250VAC
• Continuity test
• Polarity check
• Checks fuses
• When tip is in contact with live
(HOT) part of AC voltage, red
LED lights
Order No. NB49-ST600LED
$Price
$Price
G - 46
Digital Multi-Meter
with Hot Side
Identification
Credit Card Digital
Multi-Meter
Santronics Voltage Testers
Mini AC AMP Clamp Meter
•
•
•
•
•
•
•
•
•
•
•
•
Data hold
Auto ranging
Jumbo LCD display
Easy to use
Continuity beeper
Low battery indicator
Auto power off
3-1/2 digit LCD display
AC voltage: to 600V
AC current: to 600A
Resistance: to 200º
Includes all weather test leads, soft
carrying case, batteries
Ultimate AC Sensor
• Sense voltage without metallic contact
• 50-600V AC
Order No. RX31-3000 • $Price
AC Sensor
• 50-600V AC
• Visual only alert
Low AC Sensor
• 24-90V AC
• Visual only alert
Order No. NB49-DAMP221
$Price
Also available: 6-50V DC Detector†
† Not pictured
P-811
Timepieces, Environment Testing
G - 47
Digital
Stop Watch
100 Minute Count-up
& Count-down Timer
• Normal time shows: hour, minute, second,
AM/PM indicator, month, date, day
• 12/24 Hour user selectable
• 1/100 Second chronograph
• 8 Recallable lap memories
• Count-down timer with one second ews
• Timer and stopwatch
• Count-down from 99:59
• Count-up to 99:59
• Displays min. and sec.
• Automatic memory
• Loud alarm
• Large display
• Includes: battery, magnet, stand & clip on back
Order No. NB49-SW269
Order No. NB49-ABC856B
$Price
Digital Display
Timer/Clock
with Backlite
Order No. NB49-CTI278
$Price
Jumbo Display
Wide Range
Digital Light Meter
• 3Z\x″ digit LCD displays LUX, FC, low battery, MAX & HOLD indication
• Accurately displays light level in foot candles (FC) or LUX over a wide range
• Max hold and data hold
• Auto power off
• Range: 200, 2000, 20,000, 50,000 FC/LUX
• Accuracy: ±5% rdg±10dgts (<10,000 FC/LUX)
• Accuracy: ±10% rdg±10dgts (>10,000 FC/LUX)
• Resolution: 0.1 FC/LUX
• Power source: 1 “12-volt” battery included
• Weight: 5.6 oz.
Order No. NB49-DLM1337
$Price
Digital Temperature
Humidity Clock
Order No. NB49-TI170 • $Price
• Displays: temperature/ humidity/time
• Digit height: 15mm
• Extra large 3-line LCD display
• Minimum-maximum
• °C or °F selectable
• Wall or desk mount
• 12 or 24 Hour clock
Count-up & Count-down
Timer/Stopwatch
Order No. NB49-DTH800FC
• Timer and stopwatch
• Displays hours/minutes/ and seconds
• Split & lap function
• Automatically counts-up after reaching zero
• Memory function
• Extra loud alarm
• Large display
• Power source: 1 “LR44”
battery
$Price
$Price
• 5-Minute repeating snooze alarm
• Two-tone alarm beep in clock
• 12 Hour AM/PM or 24 hour international time
• Count up/down to 24 hours in seconds
• Digital memory invaluable for repeat timing
• 2“AAA”batteries (included)
Jumbo Weather Clock
Displays Temperature, Humidity, Barometric
Pressure, Time, Day & Date.
• Black face
• Displays:
• Barometric pressure/ Temperature/ Humidity
• 12 or 24 Hour clock format
• Snooze button
• Wall or desk mount
• Outstanding decor
Digital 45° Read pH Pen
• Total push button operation
• Automatic calibration at the touch of a button
• Simultaneous displays pH and temperature
• °F or °C Temperature
• Replaceable pH electrode module
• Data hold, durable waterproof housing
• Auto power off & low battery indicator, handy pocket clip
• pH range: 0.00 to 14.00 pH
• 4 Digit LCD at an easy-to-read 45° angle
• Includes: carrying case & batteries
Order No. NB49-DPH8690
Order No. NB49-TI150 • $Price
$Price
P-813
Scales
Stainless Steel Scales
Precision Scales
These Scales are Hardened &
Tempered with Satin Chrome Finish
Width
6″ (4R)
6″ (16R)
6″ (5R)
6″ (3R)
6″ × 150mm
6″ × 150mm
6″ × 150mm
6″ × 150mm
150mm
12″ (4R)
12″ (16R)
12″ (5R)
12″ (3R)
12″ × 300mm
12″ × 300mm
300mm
18″ (4R)
18″ (16R)
18″ (5R)
18″ (3R)
18″ × 450mm
450mm
24″ (4R)
24″ (16R)
24″ (5R)
24″ (3R)
24″ × 600mm
60mm
³⁄₄″
³⁄₄″
³⁄₄″
³⁄₄″
³⁄₄″
³⁄₄″
³⁄₄″
³⁄₄″
³⁄₄″
1″
1″
1″
1″
1″
1″
1″
1³⁄₁₆″
1³⁄₁₆″
1³⁄₁₆″
1³⁄₁₆″
1³⁄₁₆″
1³⁄₁₆″
1³⁄₁₆″
1³⁄₁₆″
1³⁄₁₆″
—
1³⁄₁₆″
1³⁄₁₆″
H, •, n, 3, &
Wide Rigid Rules
Order No.
MT80-182-101
MT80-182-102
MT80-182-103
MT80-182-104
MT80-182-105
MT80-182-106
MT80-182-107
MT80-182-108
MT80-182-111
MT80-182-121
MT80-182-122
MT80-182-123
MT80-182-124
MT80-182-125
MT80-182-126
MT80-182-131
MT80-182-241
MT80-182-142
MT80-182-143
MT80-182-144
MT80-182-145
MT80-182-151
MT80-182-161
MT80-182-162
MT80-182-163
—
MT80-182-165
MT80-182-171
H
•
n
3
H
•
H
H
Price
Width
$Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
¹⁄₂″
¹⁄₂″
¹⁄₂″
¹⁄₂″
¹⁄₂″
¹⁄₂″
¹⁄₂″
¹⁄₂″
¹⁄₂″
¹⁄₂″
¹⁄₂″
¹⁄₂″
¹⁄₂″
¹⁄₂″
¹⁄₂″
¹⁄₂″
³⁄₄″
³⁄₄″
³⁄₄″
³⁄₄″
³⁄₄″
³⁄₄″
³⁄₄″
³⁄₄″
³⁄₄″
³⁄₄″
³⁄₄″
³⁄₄″
Full Flexible Rules
Order No.
MT80-182-201
MT80-182-202
MT80-182-203
MT80-182-204
MT80-182-205
MT80-182-206
MT80-182-207
MT80-182-208
MT80-182-211
MT80-182-221
MT80-182-222
MT80-182-223
MT80-182-224
MT80-182-225
MT80-182-226
MT80-182-231
MT80-182-141
MT80-182-242
MT80-182-243
MT80-182-244
MT80-182-245
MT80-182-251
MT80-182-261
MT80-182-262
MT80-182-263
MT80-182-264
MT80-182-265
MT80-182-271
H
•
n
3
H
•
H
H
Hardened and Tempered
Plain Finish – Precision Quality
Cosmetic Factory Seconds • Accurate as
first quality, but at a fraction of the cost
Price
$Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Size
Width
6
6
6
6
6
12
12
12
12
12
12
12
12
18
18
18
18
18
18
18
18
24
24
24
24
24
24
24
¹⁄₂″
¹⁄₂″
¹⁄₂″
¹⁄₂″
³⁄₄″
¹⁄₂″
¹⁄₂″
¹⁄₂″
¹⁄₂″
1″
1″
1″
1″
³⁄₄″
³⁄₄″
³⁄₄″
³⁄₄″
1¹⁄₈″
1¹⁄₈″
1¹⁄₈″
1¹⁄₈″
³⁄₄″
³⁄₄″
³⁄₄″
³⁄₄″
1¹⁄₈″
1¹⁄₈″
1¹⁄₈″
Graduation
One Side
Opposite Side
3R
¹⁄₃₂ – ¹⁄₆₄
¹⁄₁₀ – ¹⁄₅₀
4R
¹⁄₁₆ – ¹⁄₈
¹⁄₃₂ – ¹⁄₆₄
5R
¹⁄₃₂ – ¹⁄₆₄
¹⁄₁₀ – ¹⁄₁₀₀
¹⁄₃₂ – ¹⁄₆₄
¹⁄₅₀ – ¹⁄₁₀₀
Mitutoyo Metric
1mm – ¹⁄₂mm
1mm – ¹⁄₂mm
em H
¹⁄₃₂ – ¹⁄₆₄
¹⁄₂mm – 1mm
mm only
3R
4R
5R
16R
4R
3R
4R
5R
16R
3R
4R
16R
EM
4R
5R
16R
EM
4R
5R
16R
EM
4R
5R
16R
EM
4R
5R
EM
Type
Flex
Flex
Flex
Flex
Rigid
Flex
Flex
Flex
Flex
Rigid
Rigid
Rigid
Rigid
Flex
Flex
Flex
Flex
Rigid
Rigid
Rigid
Rigid
Flex
Flex
Flex
Flex
Rigid
Rigid
Rigid
Order No.
Price
NB40-F63*
$ Price
NB40-F64*
Price
NB40-F65*
Price
NB40-F616*
Price
NB40-C64*
Price
NB40-F123*
Price
NB40-F124*
Price
NB40-F125*
Price
NB40-F1216*
Price
NB40-C123*
Price
NB40-C124*
Price
NB40-C1216*
Price
NB40-C12EM* Price
NB40-F184*
Price
NB40-F185*
Price
NB40-F1816*
Price
NB40-F18EM* Price
NB40-C184*
Price
NB40-C185*
Price
NB40-C1816*
Price
NB40-C18EM* Price
NB40-F244*
Price
NB40-F245*
Price
NB40-F2416*
Price
NB40-F24EM* Price
NB40-C244*
Price
NB40-C245*
Price
NB40-C24EM* Price
– See Graduation Chart
Graduation Chart
16R
Graduation
em n
¹⁄₁₀ – ¹⁄₁₀₀
¹⁄₂mm – 1mm
em 3
¹⁄₁₀ – ¹⁄₅₀
¹⁄₂mm – 1mm
em •
¹⁄₅₀ – ¹⁄₁₀₀
¹⁄₂mm – 1mm
Brass Counter Rule
Economy
Combination
Square Blades
• Accurate but slightly scratched
• Plain finish
Fractions of Yards —
¹⁄₁₆″, ¹⁄₈″, ¹⁄₄″, ¹⁄₃″, ³⁄₈″, ¹⁄₂″, ⁵⁄₈″, ²⁄₃″, ³⁄₄″ & ⁷⁄₈″
Order No. MX50-1068* • $Price
6″ Rule Cases with Clip
Size
Width Graduation
12
1
12
1
24
1
24
1
* Available while
4R
16R
4R
16R
supplies
Order No.
Price
NB40-C124A* $ Price
NB40-C1216A*
Price
NB40-C244A*
Price
NB40-C2416A*
Price
last.
Pocket Steel Rule with Clip
• 6″ × 150mm
• 1/64 & 1mm Graduation
A leather-like case with pocket clip for 6″ steel rules. Rounded
metal-bound edges prevent pocket from becoming worn and torn by
rule corners.
Description
Order No.
for ³⁄₄″ wide ruler
for ¹⁄₂″ wide ruler
MV70-55434
MV70-55433
P-814
Price
$Price
Price
Special 6″ Flexible Scale with Pocket Clip
• 1/64 & mm one side
• Metric equivalents on other side
Order No. NB40-6FWC* • $Price
Size
G - 48
Steel Rules & Accessories
Steel Rules
• 4 Styles availableFull-Flex
(1/64th thick)Semi-Flex (1/50th thick)Spring-Tempered
(3/64th thick)
• 2 Hook styles available— adjustable hook and adjustable double hook
• Staggered graduation
Spring-Tempered Scales (Chrome)
Full Flex Scales (Chrome)
Grad.
Width
Order No.
Price
6″
6″
6″
6″
6″
6″
12″
12″
12″
18″
18″
24″
24″
24″
36″
36″
3R
4R
5R
6R
9R
16R
4R
5R
16R
5R
16R
4R
5R
16R
5R
16R
¹⁄₂″
¹⁄₂″
¹⁄₂″
¹⁄₂″
¹⁄₂″
¹⁄₂″
¹⁄₂″
¹⁄₂″
¹⁄₂″
³⁄₄″
³⁄₄″
³⁄₄″
³⁄₄″
³⁄₄″
³⁄₄″
³⁄₄″
MV70-51334
MV70-66008
MV70-51347
MV70-51352
MV70-51357
MV70-51374
MV70-66009
MV70-51348
MV70-51375
MV70-51349
MV70-51376
MV70-56645
MV70-51350
MV70-51377
MV70-51351
MV70-51378
$ Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Full Flex Scales (Chrome)
Size
Grad.
Width
Order No.
6″
12″
5R
5R
¹⁄₂″
¹⁄₂″
MV70-66880
MV70-66881
Price
Size
Grad.
Width
Order No.
Price
6″
6″
12″
12″
24″
3R
4R
3R
4R
3R
³⁄₄″
³⁄₄″
³⁄₄″
³⁄₄″
1″
MV70-51335
MV70-51343
MV70-51336
MV70-51344
MV70-51338
$Price
Price
Price
Price
Price
$Price
Price
Semi-Flex Scales (Chrome)
Size
Grad.
Width
6″
6″
6″
12″
12″
18″
24″
36″
48″
4R
6R
16R
4R
16R
4R
4R
4R
4R
³⁄₄″
³⁄₄″
³⁄₄″
1″
1″
1¹⁄₈″
1¹⁄₄″
1¹⁄₄″
1¹⁄₄″
Order No.
MV70-52678
MV70-52652
MV70-52701
MV70-52679
MV70-52702
MV70-52680
MV70-52681
MV70-52682
MV70-52683
Price
$ Price
Price
Price
Price
Price
Price
Price
Price
Price
Spring-Tempered Scales (Chrome)
Size
Grad.
Width
Order No.
Price
6″
12″
18″
24″
4R
4R
4R
4R
³⁄₄″
1″
1¹⁄₈″
1¹⁄₄″
MV70-66884
MV70-66885
MV70-66886
MV70-66887
$ Price
Price
Price
Price
Rule Graduation Chart
3R . . . . . . . . . . . ¹₃₂, ¹₆₄, ¹₁₀ and ¹₅₀ths
4R . . . . . . . . . . . ¹₈, ¹₁₆, ¹₃₂, and ¹₆₄ths
5R . . . . . . . . . . . ¹₃₂, ¹₆₄, ¹₁₀, and ¹₁₀₀ths
16R . . . . . . . . . . ¹₃₂, ¹₆₄, ¹₅₀ and ¹₁₀₀ths
30 . . . . . . . . . . . . ¹⁄₂mm one side, mm ¹⁄₂mm other
31 . . . . . . . . . . . . 32″, 64ths, ¹⁄₂mm,
34 . . . . . . . . . . . . mm, ¹⁄₂mm, 10ths, 50ths
35/37 . . . . . . . . . mm, ¹⁄₂mm both sides (E-mm End)
36 . . . . . . . . . . . . 32nds, ¹⁄₂mm, 64ths, mm
Single Hook Scales (Chrome)
Heavy-Spring Tempered Scales (Chrome)
Size
Grad.
Width
Order No.
24″
24″
36″
36″
48″
48″
72″
72″
4R
16R
4R
16R
4R
16R
4R
16R
1¹⁄₄″
1¹⁄₄″
1¹⁄₂″
1¹⁄₂″
1¹⁄₂″
1¹⁄₂″
1¹⁄₂″
1¹⁄₂″
MV70-51484
MV70-51509
MV70-51485
MV70-51510
MV70-51486
MV70-51511
MV70-51488
MV70-51513
Price
$Price
Price
Price
Price
Price
Price
Price
Price
Heavy-Spring Tempered Scales (Chrome)
Size
Grad.
Width
Order No.
36″
48″
4R
4R
1¹⁄₂″
1¹⁄₂″
MV70-66888
MV70-66889
Inch/Metric Steel Rules
Size
Grad
Width
Type
Order No.
Price
6″/150mm
6″/150mm
5³⁄₄″/150mm
6″/150mm
11³⁄₄″/300mm
11³⁄₄″/300mm
11³⁄₄″/300mm
19¹⁄₂″/500mm
31
34
36
36
31
34
36
34
¹⁄₂″
¹⁄₂″
³⁄₄″
³⁄₄″
¹⁄₂″
¹⁄₂″
1
³⁄₄″
Full-Flexible
Full-Flexible
Spring-Tempered
Spring-Tempered
Full-Flexible
Full-Flexible
Spring-Tempered
Full-Flexible
MV70-51331
MV70-56262
MV70-52634
MV70-57064
MV70-51332
MV70-56696
MV70-52635
MV70-56697
$Price
Price
Price
Price
Price
Price
Price
Price
Price
$Price
Price
Size
Grad.
Width
Order No.
Price
6″
12″
18″
24″
36″
4R
4R
4R
4R
4R
³⁄₄″
1″
1¹⁄₈″
1¹⁄₄″
1¹⁄₄″
MV70-52673
MV70-52674
MV70-52675
MV70-52676
MV70-52677
$ Price
Price
Price
Price
Price
Double Hook Scales (Regular Finish)
Size
Grad.
Width
Order No.
Price
6″
12″
4R
4R
³⁄₄″
1″
MV70-52662
MV70-52664
$Price
Price
96″, 120″ and 144″ H.D. Rigid scales are available.
Call for price and delivery.
6″ Rule Cases with Clip
A leather-like case w/pocket clip for 6″ steel rules.
Rounded metal-bound edges prevent pocket from
becoming worn and torn by rule corners.
Starrett No.
Description
Order No.
Price
1634
1612
for ³₄″ wide ruler
for ¹₂″ wide ruler
MV70-55434
MV70-55433
$Price
Price
Size
G - 49
• All rules are machine divided
and tempered for accuracy
and long wear
Rulers
Inch/Metric Steel Rules
Size
Grad
Width
Type
Order No.
Price
5³⁄₄″/150mm
11³⁄₄″/300mm
36
36
³⁄₄″
1″
Spring-Tempered
Spring-Tempered
MV70-66890
MV70-66891
$Price
Price
General industrial quality rules are precision made, with etched fine
black graduations, on stainless steel or satin chrome finish.
Full Metric Rules
Size
Grad
Width
Type
Order No.
150mm
150mm
150mm
150mm
300mm
300mm
300mm
500mm
1000mm
30
35
35E
37
30
35
35
35
35
¹⁄₂″
³⁄₄″
³⁄₄″
³⁄₄″
¹⁄₂″
1″
1″
1¹⁄₈″
1¹⁄₄″
Full-Flexible
Spring-Tempered
Spring-Tempered
Spring-Tempered
Full-Flexible
Semi-Flexible
Spring-Tempered
Spring-Tempered
Spring-Tempered
MV70-51329
MV70-52630
MV70-55968
MV70-56049
MV70-51330
MV70-56048
MV70-52631
MV70-52632
MV70-52633
Price
$ Price
Price
Price
Price
Price
Price
Price
Price
Price
6″ Flexible Economy Steel Rules – Stainless Steel
Size
(In.)
Size
Grad
Width
Type
Order No.
Price
30
35
30
35
¹⁄₂″
³⁄₄″
¹⁄₂″
1″
Full-Flexible
Spring-Tempered
Full-Flexible
Spring-Tempered
MV70-66882
MV70-66893
MV70-66883
MV70-66894
$Price
Price
Price
Price
Side 2
Width
(In.)
Order No.
Price
Dec. Equiv.
$Price
¹⁵₃₂ NE50-3001†
—
¹⁵₃₂ NE50-300MM† Price
Metric Equiv.
Price
¹⁵₃₂ NE50-300ME†
NE50-3011†
—
Price
¹₄
—
Price
¹⁵₃₂ NE50-305ME
NE50-307
Price
—
³₄
w/32nds End Grad.
NE50-308
Price
32nds, 64ths
Dec. Equiv.
³₄
Satin Chrome Finish Precision Rules
10ths, 100ths
32nds, 64ths
Price
¹⁵₃₂ NE50-CF616
6
32nds, 64ths
150mm
1mm, .5mm
6 (150mm) 1mm, 64ths
6
32nds, 64ths
6
1mm, 16ths
6
8ths, 16ths
Full Metric Rules
150mm
150mm
300mm
300mm
Side 1
6
6
†
Furnished with pocket clip.
P-815
Scales
G - 50
Graduation Chart
These Scales are made of the finest quality steel,
hardened and tempered, with satin chrome finish
Flexible Rules
Style
Width
6″
12″
18″
24″
6″
12″
18″
24″
6″
12″
18″
24″
6″
12″
18″
24″
6″
12″
18″
24″
6″
12″
18″
24″
150mm
300mm
450mm
600mm
3R
3R
3R
3R
4R
4R
4R
4R
5R
5R
5R
5R
16R
16R
16R
16R
E/M
E/M
E/M
E/M
D/M
D/M
D/M
D/M
Metric
Metric
Metric
Metric
¹⁄₂″
¹⁄₂″
³⁄₄″
³⁄₄″
¹⁄₂″
¹⁄₂″
³⁄₄″
³⁄₄″
¹⁄₂″
¹⁄₂″
³⁄₄″
³⁄₄″
¹⁄₂″
¹⁄₂″
³⁄₄″
³⁄₄″
¹⁄₂″
¹⁄₂″
³⁄₄″
³⁄₄″
¹⁄₂″
¹⁄₂″
³⁄₄″
³⁄₄″
¹⁄₂″
¹⁄₂″
³⁄₄″
³⁄₄″
Order No.
Price
Wide Rigid Rules
Width
MZ80-006301 $Price
MZ80-012301 Price
MZ80-018301 Price
MZ80-024301 Price
MZ80-006401 Price
MZ80-012401 Price
MZ80-018401 Price
MZ80-024401 Price
MZ80-006501 Price
MZ80-012501 Price
MZ80-018501 Price
MZ80-024501 Price
MZ80-006161 Price
MZ80-012161 Price
MZ80-018161 Price
MZ80-024161 Price
MZ80-006261 Price
MZ80-012261 Price
MZ80-018261 Price
MZ80-024261 Price
MZ80-006561 Price
MZ80-012561 Price
MZ80-018561 Price
MZ80-024561 Price
MZ80-150751 Price
MZ80-300751 Price
MZ80-450751 Price
MZ80-600751 Price
Magnet
Rules
³⁄₄″
1″
1¹⁄₈″
1¹⁄₄″
³⁄₄″
1″
1¹⁄₈″
1¹⁄₈″
³⁄₄″
1″
1¹⁄₈″
1¹⁄₈″
³⁄₄″
1″
1¹⁄₈″
1¹⁄₈″
³⁄₄″
1″
1¹⁄₈″
1¹⁄₈″
³⁄₄″
1″
1¹⁄₈″
1¹⁄₈″
³⁄₄″
1″
1¹⁄₈″
1¹⁄₈″
Order No.
Graduations
Price
MZ80-006302 $Price
MZ80-012302
Price
MZ80-018302
Price
MZ80-024302
Price
MZ80-006402
Price
MZ80-012402
Price
MZ80-018402
Price
MZ80-024402
Price
MZ80-006502
Price
MZ80-012502
Price
MZ80-018502
Price
MZ80-024502
Price
MZ80-006162
Price
MZ80-012162
Price
MZ80-018162
Price
MZ80-024162
Price
MZ80-006262
Price
MZ80-012262
Price
MZ80-018262
Price
MZ80-024262
Price
MZ80-006562
Price
MZ80-012562
Price
MZ80-018562
Price
MZ80-024562
Price
MZ80-150752
Price
MZ80-300752
Price
MZ80-450752
Price
MZ80-600752
Price
32nds, 64ths, 10ths, 50ths
8ths, 16ths, 32nds, 64ths
32nds, 64ths, mm, 0.5mm
10ths, 100ths, mm, 0.5mm
mm, 0.5mm, mm, 0.5mm
E-Z Read Black Chrome Scales
Flexible Rules
Wide Rigid Rules
Length
Style
Width
Order No.
Price
Width
6″
6″
12″
18″
24″
6″
12″
18″
24″
6″
12″
18″
24″
6″
12″
3R
4R
4R
4R
4R
5R
5R
5R
5R
16R
16R
16R
16R
E/M
E/M
¹⁄₂″
¹⁄₂″
¹⁄₂″
³⁄₄″
³⁄₄″
¹⁄₂″
¹⁄₂″
³⁄₄″
³⁄₄″
¹⁄₂″
¹⁄₂″
³⁄₄″
³⁄₄″
¹⁄₂″
¹⁄₂″
NB35-EZ63F
NB35-EZ64F
NB35-EZ124F
NB35-EZ184F
NB35-EZ244F
NB35-EZ65F
NB35-EZ125F
NB35-EZ185F
NB35-EZ245F
NB35-EZ616F
NB35-EZ1216F
NB35-EZ1816F
NB35-EZ2416F
NB35-EZ6EMF
NB35-EZ12EMF
$Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
³⁄₄″
³⁄₄″
1″
1¹⁄₈″
1¹⁄₈″
³⁄₄″
1″
1¹⁄₈″
1¹⁄₈″
³⁄₄″
1″
1¹⁄₈″
1¹⁄₈″
³⁄₄″
1″
• High powered magnets set into rule for hands free use
(magnet every 6″)
• Stick to top of tool box or side of machine
• Available in rigid style only
Order No.
Price
NB35-EZ63C
$Price
NB35-EZ64C
Price
NB35-EZ124C
Price
NB35-EZ184C
Price
NB35-EZ244C
Price
NB35-EZ65C
Price
NB35-EZ125C
Price
NB35-EZ185C
Price
NB35-EZ245C
Price
NB35-EZ616C
Price
NB35-EZ1216C
Price
NB35-EZ1816C
Price
NB35-EZ2416C
Price
NB35-EZ6EMC
Price
NB35-EZ12EMC
Price
Extra Long Steel Scales
Size
Order No.
4R
Order No.
5R
Order No.
E/M
Price
6″
12″
18″
24″
36″
48″
MZ80-402006MG
MZ80-402012MG
MZ80-402018MG
MZ80-402024MG
MZ80-402036MG
MZ80-402048MG
MZ80-502006MG
MZ80-502012MG
MZ80-502018MG
MZ80-502024MG
MZ80-502036MG
MZ80-502048MG
MZ80-262006MG
MZ80-262012MG
MZ80-262018MG
MZ80-262024MG
MZ80-262036MG
MZ80-262048MG
$Price
Price
Price
Price
Price
Price
Size
Grad.
36″
36″
36″
48″
48″
48″
4R
5R
16R
4R
5R
16R
Approx. ThickWidth
ness
1.250
1.250
1.250
1.250
1.250
1.250
.050
.050
.050
.050
.050
.050
Order No.
Price
MZ80-300032
MZ80-300034
MZ80-300036
MZ80-300038
MZ80-300040
MZ80-300042
$Price
Price
Price
Price
Price
Price
Round End Rules
Certified Steel Rules
Includes Certification for all ISO applications
Length
Front Side
Width
Order No.
Price
6″
6″
32nds and 64ths
mm and 64ths
ZB⁄₃₂″
ZB⁄₃₂″
MZ80-7202SS6†
MZ80-7203SS6†
$Price
Price
†Equivalent Chart on back
Flexible Rules
Rigid Rules
Size
Width
4R Grad
5R Grad
Width
4R Grad
5R Grad
Price
6″
12″
18″
24″
36″
48″
¹⁄₂″
¹⁄₂″
³⁄₄″
³⁄₄″
³⁄₄″
³⁄₄″
MZ80-401006CT
MZ80-401012CT
MZ80-401018CT
MZ80-401024CT
MZ80-401036CT
MZ80-401048CT
MZ80-501006CT
MZ80-501012CT
MZ80-501018CT
MZ80-501024CT
MZ80-501036CT
MZ80-501048CT
³⁄₄″
1″
1¹⁄₈″
1¹⁄₈″
1¹⁄₄″
1¹⁄₄″
MZ80-402006CT
MZ80-402012CT
MZ80-402018CT
MZ80-402024CT
MZ80-402036CT
MZ80-402048CT
MZ80-502006CT
MZ80-502012CT
MZ80-502018CT
MZ80-502024CT
MZ80-502036CT
MZ80-502048CT
$Price
Price
Price
Price
Price
Price
Also available in E/M grad. To order use: MZ80-2610, then size (06, 12, 24 etc.) then, CT to
order flexible models. To order rigid models use MZ80-2620, then size, then CT.
Example: 6″ flexible certified rule with E/M graduation is MZ80-261006CT
P-816
Hook Rules
Length
Style
Width
Order No.
Price
6″
12″
18″
24″
4R
4R
4R
4R
³⁄₄″
1″
1¹⁄₈″
1¹⁄₈″
MZ80-402H06
MZ80-402H12
MZ80-402H18
MZ80-402H24
$Price
Price
Price
Price
Length
Designation
3R
4R
5R
16R
E/M
D/M
Metric
Rules, Plumb Bobs & Gages
G - 51
Exact ® Aluminum Straight Edge Rules
Measure Stix ™
Steel Measuring Tape
• English measure • Flexible anodized aluminum
• 2″ Width • ¹⁄₈″ and ¹⁄₁₆″ Graduation
with adhesive backing
4, 6, 12′ / 1.2, 2, 4m
Mount on work benches,
saw tables, drafting tables, etc.
Starrett
Item No.
English Reading
Blade
Width
Length
¹⁄₂″
¹⁄₂″
³⁄₄″
4′
12′
6′
Blade
Graduation Style
Order No.
MV80-63168
MV80-63170
MV80-63169
S1
Blade
Graduation Style
¹⁄₂″ -13 mm
¹⁄₂″ -13 mm
³⁄₄″
4′-1.2 m
12′-4 m
6′-2 m
Order No.
MV80-63171
MV80-63173
MV80-63172
S12
.081″
.081″
.125″
.125″
.125″
.125″
thick
thick
thick
thick
thick
thick
Order No.
Price
MV80-36090
MV80-36091
MV80-36092
MV80-36093
MV80-36094
MV80-36095
$ Price
Price
Price
Price
Price
Price
Price
$Price
Price
Price
Aluminum Yardsticks
• Finest quality aluminum yardstick
• Lightweight, flexible, rustproof, tarnish-free
• Straight parallel edges for greater accuracy
• Marked one side only, both edges in consecutive inches to 16ths
Graduated on front side in inches to 1/16ths on upper edge and
decimeters, centimeters, and millimeters on lower edge. Other side
shows table of equivalents and conversions.
Red End ® Folding Wood Rule
• Marked both sides, both edges
to 16ths, 16″ stud centers in red
• Order No. MZ50-066F has
inside markings. Numbering
begins on inside of rule.
Description
Order No.
Price
36″ × 1⁵₆₄″
27mm × 1m
MZ50-1260
MZ50-1261ME
$Price
Price
Stair Gage Fixture Attachments
For rafter and framing squares
Blade Dimension
Order No.
Price
⁵₈″ × 6′
MZ50-066F
$Price
A pair of these fixtures clamped to a carpenter’s framing or rafter
square forms a handy gage for laying out stair stringers, hip, valley
and other rafter cuts plus many other unusual cuts.
Furnished in pairs — one right and one left hand
Length
24″
36″
48″
60″
72″
96″
Price
$Price
Price
Price
English / Metric Reading
Blade
Width
Description
ASE24
ASE36
ASE48
ASE60
ASE72
ASE96
Brass Plumb Bobs
•L
acquered finish to
resist corrosion
• Ties easily to any string
or line
• Extra hardened steel tip
included
• Used for installing deck posts,
support beams, plumbing, etc.
Long
Width
Slot
Length
Order No.
Price
(per pair)
³⁄₁₆″
1⁷⁄₈″
MV70-50476
$Price
Slotted to keep two opposite
hexagonal faces at right
angles to the edge of the
square for true work contact
and positive alignment with
graduations
Weight
(Oz.)
Order No.
Price
Weight
(Oz.)
Order No.
Price
6
8
—
12
—
NE50-8008
—
NE50-80012
—
$Price
Price
Price
8
12
16
24
KP75-908BR
KP75-912BR
KP75-916BR
KP75-924BR
$ Price
Price
Price
Price
Short
Width
Width
Slot Across Flats
³⁄₁₆″
³⁄₄″
Order No.
Price
(per pair)
MV70-52482
$Price
P-817
Tape Measures
G - 52
Power Return Tapes
Series 1000
Power Tapes
Pro-Series Power Tapes
• Non-slip Toggle Lock button
• Dura-Life™ end hook
• Ny-Clad® blade coating
extends blade life 5x
• Rubber overmold for
comfort
• Graduated to ¹⁄₁₆″
bottom edge, first 12″ to
¹⁄₃₂″ (except 1” blades)
• Toggle Lock button
• Four rivet Quad-Hook™ on 1″ wide blades
• Graduated ¹⁄₁₆″ top edge
• Graduated to ¹⁄₁₆″ bottom edge, first 12″ to ¹⁄₃₂″ (except 1 blades)
• Hi-Viz® Orange case
Order No.
Price
Replacement
Blade
³₄″ × 12′
³₄″ × 16′
³₄″ × 25′
1″ × 25′
1″ × 30′
MZ50-HV1312
MZ50-HV1316
MZ50-HV1325
MZ50-HV1425
MZ50-HV1430
$Price
Price
Price
Price
Price
—
RW316
RY325
RY425
RY430
Series 2000 Tapes
¹₂″ × 10′
¹₂″ × 12′
³₄″ × 12′
³₄″ × 16′
³₄″ × 25′
1″ × 25′
1″ × 30′
1″ × 33′
13mm(¹₂″)
19mm(³₄″)
19mm(³₄″)
19mm(³₄″)
x
x
x
x
3mm
3mm
5mm
8mm
(10′)
(10′)
(16′)
(26′)
13mm(¹₂″) x 3mm (10′)
Price
MZ50-2210
$Price
MZ50-2212
Price
MZ50-2312
Price
MZ50-2316
Price
MZ50-2325
Price
MZ50-2125
Price
MZ50-2130
Price
MZ50-2133
Price
Metric/English
MZ50-2223CME
Price
MZ50-2333ME
Price
MZ50-2335ME
Price
MZ50-2338CME
Price
Metric/English (Decimal)
MZ50-2210MEX
Price
Order No.
MZ50-QR1312
³₄″ × 12′
MZ50-QR1316
³₄″ × 16″
MZ50-QR1425
1″ × 25″†
†Four rivet Quad-Hook™
Price
$Price
Price
Price
Economy Tapes
Replacement
Blade
—
RW316
—
RW316
RY325
RY425
RY430
—
—
—
—
—
Self
Centering Tape
• Contour grip case
• Hi-Viz® Orange
• Graduated to ¹⁄₁₆″ bottom
edge, first 12″ to ¹⁄₃₂″
(standard read)
—
• Non-slip Rubber Grip & Hi-Viz® ABS Plastic body
• Automatic Blade Lock
• Recessed Lock Release to reduce accidental retraction
P-818
$Price
Price
Blade
Dimension
Lufkin Autolock 25' Measuring Tape
Standard Autolock
Autolock with Magnetic Tip
$Price
$Price
Order No.
MZ50-AL725
Price
MZ50-PS3312
MZ50-PS3425
• Toggle Lock button
• Marked with fractions to ¹⁄₈″ and
decimal equivalents
• Graduated feet and inches to
¹⁄₁₆″ top edge
• Graduated to ¹⁄₁₆″ bottom edge, first
12″ to ¹⁄₃₂″ (except 1″ blade)
•Toggle Lock button
•Four rivet Quad-Hook™ on 1″ wide blades
•Graduated to ¹⁄₁₆″ top edge
•Bottom edge raduated to ¹⁄₁₆″, first 12″ to 1/32nd inch (except 1″ blade)
•Metric/English blades upper edge graduated to ¹⁄₁₆″, lower edge graduated in mm
•Decimal blade upper edge to mm, lower edge to ¹⁄₁₀″
Order No.
Order No.
³₄″ × 12′
1″ × 25′
Quickread Tapes
Chrome finished case
Blade
Dimension
Blade
Dimension
Blade
Dimension
Order No.
MZ50-AL725MAG
Blade
Dimension
¹₂″ × 10′
³₄″ × 16′
1″ × 25′
1″ × 25′ Quickread
Order No.
Price
MZ50-L510
$Price
MZ50-L516
Price
MZ50-L525
Price
MZ50-QRL525MP Price
• The top edge
is standard
measurement, bottom
edge is exactly half
• Measure on the top
edge of the blade and
look at the lower edge
for the center
Order No.
MZ50-L525SCTMP
$Price
Lufkin Magnetic Tip 25' Measuring Tape
• Non-slip Rubber Blade Lock Button
• Magnetic End Hook features powerful
dual magnets
• Non-slip Co-Molded Rubber Grip & tough
Hi-Viz® Orange ABS Plastic body
Order No. MZ50-L725MAG
$Price
Measuring Tapes
G - 53
Measuring Tapes
XL Power Return Tape,
Hi-Viz® Case, Cushion Grip
• New blade designed to achieve10' stand-out
• Soft touch lock button
• Rubber cushion absorbs impact
and improved grip
• Clearcoat blade protection and
4-rivet end hook
1-3/16" x 25'
• Easy on/off belt clip
Order No. MZ50-XL8525
Banner and Artisan
Diameter Tapes
Banner Tape
• $Price
Mezurall
®
Blade
Dimension
Blade
Dimension
Case Color
Order No.
Price
Replacement
Blade
¹₂″ × 8′
¹₂″ × 10′
¹₂″ × 10′
¹₂″ /13mm x 10′/3m
¹₂″ × 12′
¹₂″ × 12′
³₄″ × 12′
Chrome
Black
Chrome
Chrome
Black
Chrome
Chrome
MZ50-W928
MZ50-Y8210
MZ50-W9210
MZ50-W9210ME
MZ50-Y8212
MZ50-W9212
MZ50-W9312
$Price
Price
Price
Price
Price
Price
Price
—
—
RY210
—
RY212
RY212
RW312
Chrome Clad Mezurall
®
Blade
Dimension
Case Color
Order No.
Price
¹₂″ × 12′
¹₂″ × 12′†
Chrome
Chrome
MZ50-C9212
MZ50-C9212X
$Price
Price
$Price
Price
Artisan Tape
• Nubian® blade
• Graduated consecutive inches to ¹⁄₁₆″ one side; other side to
diameter inches, with an extra diameter inch subdivided to ¹⁄₆₄″
left hand
Blade
Dimension
Order No.
Price
³₈″ × 240″
MZ50-120P
$Price
Blade
Dimension
Order No.
Price
³₈″ × 50′
³₈″ × 100′
MZ50-HW50
MZ50-HW100
$Price
Price
Hi-Viz® Universal Lightweight
• Hi-Viz® Orange case
• Yellow clad blade with hook ring
• Graduated to ¹⁄₈″ with
instantaneous foot reading, 16″
centers indicated by a diamond
†Graduated to ¹⁄₁₀″ in (Engineers Scale)
Pocket Tapes
• ¹⁄₄″ wide yellow clad blade
• Graduated to ¹⁄₁₆″, first 12″ to ¹⁄₃₂″
• 16″ centers designated by diamonds,
every 12″ in red
• Metric/English version graduated to
¹⁄₁₆″ inch top edge, mm lower edge
Executive® Thinline
¹₄″ × 6′
¹₄″ × 8′
¹₄″/6mm x 6′/2m
Price
$Price
Price
Home Shop Tape
Same as above except Chrome clad blade
Blade
Dimension
Order No.
MZ50-HW223
MZ50-HW226
Metric/English
MZ50-HW223ME
³₈″ (10mm) x 50′ (15m)
MZ50-HW226ME
³₈″ (10mm) x 100′ (30m)
³₈″ × 50′
³₈″ × 100′
Order No.
Price
MZ50-W606
MZ50-W608
MZ50-W606ME
$Price
Price
Price
• ¹⁄₄″ wide yellow clad blade
• Graduated to ¹⁄₁₆″, first ¹⁄₂″ to ¹⁄₃₂″
• ¹⁄₁₆″ centers designated by
diamonds, every 12″ in red
Pee Wee Pocket Tapes
Blade
Dimension
Order No.
Price
¹₄″ × 6′
¹₄″ × 10′
MZ50-W616
MZ50-W6110
$Price
Price
Blade
Dimension
Order No.
Price
Replacement
Blade
³₈″ × 50′
³₈″ × 100′
MZ50-50
MZ50-100
$Price
Price
OY50
OY50
• Graduated to ¹⁄₁₆″ on
top and bottom edge;
bottom edge to ¹⁄₃₂″ for
the first 12″ bottom edge
• Metric/English version graduated to ¹⁄₁₆″
top edge, mm lower edge, decimeters in red
• Rugged, vinyl-covered steel case
• Large easy winding drum with a nylon
roller guide
• Yellow clad blade with folding hook
hook ring (banner only)
• Graduated to ¹⁄₈″ with instantaneous
foot reading, ¹⁄₁₆″ centers indicated by
a diamond
3/8" x 100' ProSeries
3:1 Ratio Long Steel Tape
• 3:1 Gear ratio for fast
blade retrieval
• Precise, easy to read
black and red blade
markings
• Premium steel blade
resists kinks
3/8" x 100'
Order No. MZ50-PS100S • $Price
P-819
Measuring Tapes
1″ × 25′ Code Tape™
Measuring Tape
ProSite Tape Measures
®
• Impact resistant ergonomic case
• Easy-to-read blade
• Double riveted tip
G - 54
With ADA building code requirements on the
blade
Special information printed on the blade that commercial builders
and contractors will appreciate. Practical information locating and
installation of various equipment required by the ADA – (Americans
with Disabilities Act).
Starrett No.
Description
Order No.
XY1-16
XY1-25
XY1-30
XY1-8ME
16′ S1 Grad, with Yellow Case
8M/25′ S12 Grad, with Yellow Case
MV80-67671
MV80-67670
MV80-67672
MV80-67780
Price
$Price
Price
Price
Price
•
•
•
•
Ergonomic soft grip
Rugged
Smooth blade lock
High visibility cases
Starrett No.
Description
Order No.
Price
MY12-12
MY34-16
MY1-25
MY1-33
1/2″ × 12′ Yellow case w/black over-mold
3/4″ × 16′ Yellow case w/black over-mold
1″ × 25′ Yellow case w/black over-mold
1″ × 33′ Yellow case w/black over-mold
1.09″ × 25′ Extra-wide blade, Yellow case w/black over-mold
MV80-68932
MV80-68933
MV80-68934
MV80-68935
$Price
Price
Price
Price
MV80-11625
Price
MY109-25
25′ Tape Measure
WHILE SUPPLIES LAST
Combo Pack
Tough Tapes
25′ Tape Plus Marking Pencil and Utility Knife!
• 25′ L × 1″ W TRU-LOK® tape
• Flatside carpenter pencil
• 4 Position retractable utility knife
Order No. MV75-VPO1
$Price
Tru-Lok ®
Measuring Tapes
• Tough Tip ® Blade Protector standard on all 1″ blades (except Re-Tape™)
• Rugged, impact resistant case
“Hi-Visibility” Neon Tape Only
Starrett
Item No.
C125
Y125
C1212
Y1212
Width
Blade
Length
Case
Color/Finish
1″
1″
¹⁄₂″
¹⁄₂″
25′
25′
12′
12′
Chrome
Yellow
Chrome
Yellow
Order No.
MV80-65366
MV80-65933
MV80-65418
MV80-65943
Price
$Price
$Price
Price
Price
Price
Replacement Blades
Brass Counter Rule
Fits
Tape No.
Blade
Dimension
Fractions of Yards —
¹⁄₁₆″, ¹⁄₈″, ¹⁄₄″, ¹⁄₃″, ³⁄₈″, ¹⁄₂″, ⁵⁄₈″, ²⁄₃″, ³⁄₄″ & ⁷⁄₈″
C926
C928
C9210
W926ME
W6110
W926
Y826
Y130
¹⁄₂″ × 6′
¹⁄₂″ × 8′
¹⁄₂″ × 10′
¹⁄₂″ × 6′
¹⁄₄″ × 10′
MZ50-RC6*
MZ50-RC8*
MZ50-RC10*
MZ50-RW6ME*
MZ50-RW6110*
¹⁄₂″ × 6′
MZ50-RY26*
Price
1″ × 30′
MZ50-RY430
Price
Order No. MX50-1068* • $Price
P-820
Order No. MV75-SKP125
Order No.
Price
$ Price
Price
Price
Price
Price
Other blades
available, call
for quote
Tape Measures
G - 55
Fat Max Tape Rule
Hi-Vis Tapes
• 1¹⁄₄″ Wide blade, 25′ length
• 11′ Blade stand-out
• Exclusive cushion grip built
into case for non-slip grip
and impact resistance
• Multi-function hook grabs on
side, top or bottom
•C
ompact ergonomically designed
case with soft rubber grip
• Durable, shock resistant case
• Heavy-duty 3-rivet end hook
Order No. KR60-33725
$Price
Blade Length
Blade Width
Order No.
Price
16′
25′
C\v″
1″
KR60-30304
KR60-30305
$ Price
Price
Power Grip Tapes
Extra Heavy Duty
Ergonomic Tape Rule
• 1″ Wide blade, 25′ length
• Three rivet hook
• 25% Thicker blade for extra
strength and durability
• Mylar coated blade for extended
blade life and readability
• Top forward blade lock design
makes it easier to lock and unlock blade
• Rubber bumper to protect hook and blade
• Cushioned rubber grip for great comfort
• Safety yellow case and belt clip
•M
olded thick rubber boot fits
comfortably in hand for better
control, absorbs impact
• Yellow rubber boot
• Bold, clear numbers on bright
yellow blades
• Rigid blade provides excellent
stand-out, with protective
acrylic coating
Order No.
KR60-33599
$Price
Economy Tape Rules
Description
16′ Black
25′ Black
30′ Black
Standard Read
Order No.
Description
KP75-7516
KP75-7525
KP75-7530
Blade
Length
Width
Order No.
Price
12
16
25
¹⁄₂″
³⁄₄″
1″
KR60-30485
KR60-30495
KR60-30455
$Price
Price
Price
Fractional Read Tape
″ wide, 25′ Blade length
1
Numerical readouts every ¹⁄₈″
Polymer-coated blade for long life
Graduated to ¹⁄₁₆″
16′ Yellow
25′ Yellow
30′ Yellow
Fractional Read
Order No.
Price
KP75-7517
KP75-7526
KP75-7531
$Price
Price
Price
25′ Fractional Read
Power Tape
•P
olymer-coated blade for long life
• High-contrast blade for easy readability
• Graduated to ¹⁄₁₆″
•
•
•
•
Contractor Grade
• Ultra rigid blade with a durable
acrylic coating
• Accurate inside and outside
measurements
• Bold, clear letters on bright
yellow tape
• Includes heavy duty steel belt clip
Order No. KP75-626
$Price
Open Reel Fiberglass Tapes
• Heavy-duty construction
• High impact resistant ABS body
• Printed two sides, inch and engineer’s
¹⁄₁₀th foot scale.
• Fiberglass tape will not rot, corrode or distort
• Numbers and graduations are
printed in black on white blade
• Yellow case with comfortable rubber
hand grip
Order No. KR60-30454
$Price
Description
Order No.
100′ × ¹⁄₂″ Open Reel
200′ × ¹⁄₂″ Open Reel
300′ × ¹⁄₂″ Open Reel
KP75-6799
KP75-6820
KP75-6830
Price
$Price
Price
Price
P-821
Starrett Combination Squares
G - 56
Combination Squares
• Reversible Lock Bolts
• Spirit level in square &
protractor head
• Tempered steel
machine divided blade
• Direct reading 180°
protractor scale
2-Pc. Combination Square Sets
3-Pc. Combination Squares
with Square Head, Center Head and Blade
4-Pc. Combination
Square Sets
Cast Head
Black Wrinkle Finish
2-Pc. Combination Squares with Square Head and Blade
Cast Head
Forged & Hardened Head
Smooth Black Enamel Finish
Grad.
Blade
Finish
Order No.
Price
Order No.
Price
6″
6″
6″
6″
12″
12″
12″
12″
18″
18″
18″
18″
24″
24″
24″
24″
4R
4R
16R
16R
4R
4R
16R
16R
4R
4R
16R
16R
4R
4R
16R
16R
Regular
Chrome
Regular
Chrome
Regular
Chrome
Regular
Chrome
Regular
Chrome
Regular
Chrome
Regular
Chrome
Regular
Chrome
MV70-50051
MV70-56362
MV70-50053
MV70-56364
MV70-50055
MV70-56366
MV70-50057
MV70-56368
MV70-50059
MV70-56370
MV70-50061
MV70-56372
MV70-50063
MV70-56374
MV70-50065
MV70-56376
$ Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
MV70-50205
MV70-56392
MV70-50207
MV70-56394
MV70-50209
MV70-56396
MV70-50211
MV70-56398
MV70-50213
MV70-56400
MV70-50215
MV70-56402
MV70-50217
MV70-56404
MV70-50219
MV70-56406
$ Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Grad.
Blade
Finish
Order No.
Price
Order No.
Price
12″
4R
Chrome
MV70-66896
$Price
MV70-66897
$Price
Blade
Finish
Order No.
Price
Order No.
4R
4R
16R
16R
4R
4R
16R
16R
4R
4R
16R
16R
4R
4R
16R
16R
Regular
Chrome
Regular
Chrome
Regular
Chrome
Regular
Chrome
Regular
Chrome
Regular
Chrome
Regular
Chrome
Regular
Chrome
MV70-50052
MV70-56363
MV70-50054
MV70-56365
MV70-50056
MV70-56367
MV70-50058
MV70-56369
MV70-50060
MV70-56371
MV70-50062
MV70-56373
MV70-50064
MV70-56375
MV70-50066
MV70-56377
$ Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
MV70-50206
MV70-56393
MV70-50208
MV70-56395
MV70-50210
MV70-56397
MV70-50212
MV70-56399
MV70-50214
MV70-56401
MV70-50216
MV70-56403
MV70-50218
MV70-56405
MV70-50220
MV70-56407
16R . . ¹₃₂, ¹₆₄, ¹₅₀ and ¹₁₀₀ths
34 . . . .¹₁₀, ¹₁₀₀, ¹₂mm and mm
35 . . . .¹₂mm and mm, both sides
Grad.
Blade
Finish
Order No.
Price
Order No.
12″
12″
12″
12″
18″
18″
4R
4R
16R
16R
4R
4R
Regular
Chrome
Regular
Chrome
Regular
Chrome
MV70-51556
—
MV70-51557
—
—
—
Price
Price
Price
Price
Price
Price
MV70-51542
MV70-51548
MV70-51543
MV70-51549
MV70-51544
MV70-51550
Square Head
Forged and Hardened
LSS No.
Order No.
Price
Price
4″
6″
12″, 18″, 24″
H114
H116
H111224
MV70-50069
MV70-50070
MV70-50071
$Price
Price
Price
MV70-50223
H334
MV70-50224
H336
H331224 MV70-50225
$Price
Price
Price
4″
6″
12″, 18″, 24″
C114
C116
C111224
MV70-50072
MV70-50073
MV70-50074
Price
Price
Price
MV70-50226
C334
MV70-50227
C336
C331224 MV70-50228
Price
Price
Price
Center Heads
Protractor Heads
Cast Black Wrinkle Finish
LSS No.
Order No.
Price
Reversible
MV70-52525
$Price
12″, 18″, 24″ PNR1224W MV70-50107
Price
P-822
Order No.
12″
12″
4R
4R
Regular
Chrome
MV70-50042
MV70-50046
Price
$Price
Price
Blades
Size
Cast
LSS No.
Order No.
12″, 18″, 24″ PR1224W
Blade
Finish
Only for Combination Squares, Sets and Bevel Protractors.
Square Heads
Size
Grad.
$Price
Price
Price
Price
Price
Price
Center Head
Protractor Head
Size
Size
Price
Select Models available with Standard Letter of Certification
Combination Square Components
Square Heads, Center Heads
and Protractor Heads
Only for Combination
Squares, Combination
Sets and Bevel Protractors
Price
$Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Size
Same as above except
with Non-Reversing
Protractor Head available
in Cast Iron Heads only.
Rule Graduation Chart
3R . . . ¹₃₂, ¹₆₄, ¹₁₀ and ¹₅₀ths
4R . . . ¹₈, ¹₁₆, ¹₃₂, and ¹₆₄ths
5R . . . ¹₃₂, ¹₆₄, ¹₁₀, and ¹₁₀₀ths
Grad.
6″
6″
6″
6″
12″
12″
12″
12″
18″
18″
18″
18″
24″
24″
24″
24″
Cast Head
Size
Size
4-Pc. Combination Square Sets
Combination Set with Forged and Hardened Square and Center Heads
and Reversible Protractor Heads. Smooth Black Enamel Finish.
2-Pc. Combination Squares with Square Head and Blade
Cast Head
Cast Smooth Black Enamel Finish
LSS No.
Order No.
Price
PR1224S MV70-52515
Non-Reversible
—
—
$Price
—
Graduation
Blade Finish
Order No.
Price
MV70-50076
4″
4R
Regular
$Price
MV70-50077
4″
4R
Chrome
Price
MV70-50078
4″
16R
Chrome
Price
MV70-50079
6″
4R
Regular
Price
MV70-50080
6″
4R
Chrome
Price
MV70-50081
6″
16R
Regular
Price
MV70-50082
6″
16R
Chrome
Price
MV70-50083
12″
4R
Regular
Price
MV70-50084
12″
4R
Chrome
Price
MV70-50085
12″
6R
Chrome
Price
MV70-50086
12″
16R
Regular
Price
MV70-50087
12″
16R
Chrome
Price
MV70-50088
18″
4R
Regular
Price
MV70-50089
18″
4R
Chrome
Price
MV70-50090
18″
16R
Regular
Price
MV70-50091
18″
16R
Chrome
Price
MV70-50092
24″
4R
Regular
Price
MV70-50093
24″
4R
Chrome
Price
MV70-50094
24″
6R
Chrome
Price
MV70-50095
24″
16R
Regular
Price
MV70-50096
24″
16R
Chrome
Price
Additional Square Heads, Center Heads, and Protractor Heads Available.
36″ and 48″ blade available. Call with your requirements.
Size
3-Pc. Combination
Square Sets
Levels, Squares & Protractors
G - 57
Macklanburg-Duncan Levels
SmartTool The Only Level That Reads All Angles
Smarttool™ SmartTool™ digitally displays degrees, percent slope and pitch
to 1/10 degree accuracy. Extremely durable, it will keep its accuracy for years
with push button calibration. Features audio sound at level and plumb. Comes
with standard 9 volt battery.
Sensor Module in a 24″ Rail
Sensor Module in a 48″ Rail
Module
(Module can be used alone or with
NA42-92288 and NA42-42296)
$Price
$Price
$Price
Magnetic Bracket
For NA42-92346
$Price
Protractors/Angle Meters
Carpenter Squares
12″ Combination Square
Order No. KP75-240 •
$Price
6″ Pocket Square
• 6″ Etched stainless steel blade with inch grads
• Accuracy guaranteed square to .001″ per inch
• True Blue® vial for accuracy
$Price
12″ Combination Square
• 12″ Steel blade with inch graduations
• Machined square head
• Self-aligning drawbolt, hardened scriber
$Price
16″ Heavy-Duty Professional
• 16″ Etched stainless steel blade with inch grads
• Accuracy guaranteed square to .001″ per inch
• True Blue® vial for accuracy
$Price
Heavy-Duty
MAGNUM™ Rafter Square
•S
olid aluminum extruded square will not bend
or break
• Aluminum will not rust or corrode
• Stamped conversion tables
$Price
Contractor Grade Quick Square ®
With Adjustable Arm
•A
ll-purpose layout tool
• Movable, lockable arm for repeatable angle
cutting and fast, accurate measurements
• Durable black body with yellow filled
graduations ensure superior readability
• Solid brass adjusting knob locks in angles for
accuracy as protractor, rafter measurement,
and as a circular saw guide
Magnetic
POLYCAST® Protractor
• Magnetic base and back
• Easy reading dial with
adjustable angle pointer
• Built-in angle pitch calculator
on back
• Polycast® construction
• 12″ Steel blade with inch graduations
• Metal square head, full view acrylic vial
• Self-aligning drawbolt
Order No. KP75-36 • $Price
Small Angle
Magnetic Protractor
• Magnetic base
• Full view acrylic vial
protractor dial is graduated
in 5° increments
• Durable Polycast® construction
Exact ® Angle Meter-AM2
• Sturdy high-impact plastic
• Scale readings from 0° to
90° in any quadrant
• Measures any angle for
pitch or slope
• 5″ × 5″ Magnetic base
and back
• Pitch/angle calculator finds
rise, run, angle, pitch on
12″ or rafter lumber lengths
ProSite™ Protractor
• Perfect miter joints every time
• Direct reading –
no calculations required
• Durable aluminum construction
Base Length
Rule Length
Order No.
Price
10³⁄₄″
6³⁄₄″
KR60-46053
$Price
P-827
Laser Levels/Pocket Levels
G - 58
Laser Levels
6-Pc. Deluxe Laser Level Kit
Specifications:
• FDA approved laser
• Extruded aluminum level housing
• 16″ Aluminum dot/line laser level
• 300 Foot laser range
• Twin vials – horizontal and 360° rotary
• Level complete with Inch/Metric scale
• Aluminum rotary base
• Heavy duty telescoping aluminum tripod
• Projects dot or horizontal line
• Two AAA batteries (included)
• Complete with snap-in storage case and laser enhancing googles
Order No. KP85-7085* • $Price
9″ Mini Laser Level with Tripod
16″ Spirit Laser Level with Stand
Specifications:
• Extruded aluminum housing
• 300 Foot laser range
• Twin level vials
– horizontal and
360° rotating
• Takes two AAA batteries
(included)
• Level complete
with Inch/Metric
scale
• Sturdy adjustable leveling stand
• Beam splitter lens for horizontal leveling
6-Pc. Rotary Laser Level Kit
Specifications:
• Rotary laser with 0-600 RPM rotating head
• Heavy duty telescoping aluminum tripod
• 30-Meter / 100-Foot working range
• Four “C” batteries (included)
• ⁵⁄₈″ Standard tripod mount
• Integrated bubble level for easy accurate setup
• Includes laser enhancing goggles
• Complete with snap-in storage case
Specifications:
• Torpedo level projects a dot up to 160 feet away
• Equipped with three bubble vials for accurate readings at 0°, 45°, and 90°
• Collapsible multi-position swiveling tripod
• Complete with 3 button cell batteries
Line Level Set
Pocket Level
Available in 2¹⁄₂ and 3¹⁄₂ inch sizes made from hexagonal stock ³⁄₈ and
¹⁄₂ inch wide respectively. Made with convex ends.
Starrett No.
Size
Description
Order No.
Price
135A
135B
2¹⁄₂″
3¹⁄₂″
With Main Vial
With Main Vial
MV70-50570
MV70-50571
$Price
Price
• Lightweight construction minimizes line sag
• Unbendable open hooks allow level to slide freely
• Pocket clip helps prevent loss
• Use for landscaping, plumbing,
masonry work, gutters, and sheet
metal work
• VARI-PITCH™ vial reads from level
to ¹⁄₂″ pitch in ¹⁄₈″ increments
Exact ® Line/Pocket Surface Level
Lightweight, durable aluminum construction prevents line sag. Sure-grip line hooks hold line and allow level to slide freely. Flat base
for accurate surface leveling. Large vial sight. Permanently marked for
fast dependable readings.
• Aluminum frame
• Line hooks
Starrett
Item No.
Description
Order No.
Price
E3
3″ 1 level vial with line hooks
MV80-36077
$Price
Bullseye™ Circular Level
• All purpose, 360° vial level in all directions
• Sturdy plastic construction
• Large sight for ease of reading
• Use on ranges, refrigerators,
washers, dryers, stereos, RV's
Model
Description
Empire
Starrett
1³⁄₄″ diameter
1³⁄₄″ diameter
Order No.
KP75-3604
MV80-36078
Price
$Price
Price
P-831
Squares & Levels
Master Precision Level
Ground and graduated main vial of 10 second accuracy–one division
equals .0005″ per foot. Auxiliary level vial shows lateral position as guide
to horizontal setting. Insulated from handling by non-conductive top plate.
Level vials positioned to reduce breakage. Made of seasoned cast iron.
Base carefully machined and scraped. Black wrinkled finish on nonworking surfaces.
Starrett No.
Length
Base
Width
Base
Height
Level
Order No.
MV70-50719
3″
1⁵⁄₈″
MV70-66932
199Z
15″
3″
1⁵⁄₈″
Sent in finished wood case
199Z
15″
Price
$Price
$Price
This is a Master Precision Level for accurately checking the work of
machinists and toolmakers, the setting up of machinery, and other
work that requires extreme leveling accuracy.
Special Features:
• The main level vial is graduated to 10 second
accuracy (1 division equals .0005″ per foot)
• This is an auxiliary level which enables the
user to check side declinations
• The body of the level is of cast iron and the base is hand scraped
for extreme accuracy
• There are plastic knobs on the
frame to insulate the instrument
from the heat of the hand
Precision Levels
Accuracy
W
Dimensions
D
H
Order No.
.0012″/12″
.0006″/12″
.00024″/12″
±.0006″
±.0003″
±.00017″
7.87″
7.87″
7.87″
1.73″
1.73″
1.73″
1.50″
1.50″
1.50″
MT80-960-614
MT80-960-615
MT80-960-616
Price
$Price
Price
Price
No. 98 levels have ground and
graduated main vial. All levels
have cross test vial, except 4″
size. 12″ size of both series has
in addition a plumb vial, and 18″
size a double plumb vial. Plumb vials on No. 98-12″ and 18″ levels
are ground. Main vials are adjustable for positive setting and housed
in brass tube with friction fit closing cover to prevent breakage. Level
bases are seasoned castings with black wrinkle finish, accurately
machined and finished on bearing surface. An involute longitudinal
groove between bearing flats provides accurate seating on round work.
Ground and Graduated Main Vial†
Starrett No.
Size
Order No.
Order No.
Price
8″
12″
NN95-2422008
NN95-2422012
$Price
Price
360° Digital Level/Protractor
Machinist Levels
†Ground vials are
approximately four times
more sensitive to movement
than plain vials; No. 97
& No. 98 –12″ & 18″.
Levels available with or
without finished wood case.
Furnished without case
unless otherwise ordered
packed one in a box.
Size
• Instant
LCD display of level, tilt, true vertical or any angle
in between to highest accuracy,1/10 of a degree reading.
• Deviation from true plane is measurable through full 360° (4×90°)
• Floating zero. Provides zero selection anywhere within its 360° range
• Hold button
SPECIFICATIONS
• Reset plus Superset
Measuring Range . . . . . . . 360°
self-calibration modes
. . . . . . . . . . . . . . . . . . . . (4×90°)
• Tapped #6-32 holes and
Resolution . . . . . . . . . . . . . 0.1°
V-Groove in baseplate
Accuracy . . . . . . . . 0-10° ± 0.1°
a . . . . . . . . . . . . . . . 11-79° ± 0.2°
• Operates on standard 9V Alkaline
. . . . . . . . . . . . . . . . 80-90° ± 0.1°
battery (included). Low battery
Repeatability . . . . . . . . . . . . .05
indicator. Automatic shut-off.
Pro 360 No SPC Output
Cross Axis Error . . . . Less than
. . . . . . . . . . . . . . . . . 2° up to 20°
. . . . . . . . Operating Temperature
Range . . . . . . . . . – 5° to +50°C
. . . . . . . . . Storage Temperature
Range . . . . . . . . – 20° to +60°C
Size . . . . . . . . 6.0×1.2×1.9″ high
Weight . . . . . . . . . . . . . 10.2 oz.
Price
MV70-50440
984
4″
$ Price
MV70-50441
986
6″
Price
MV70-50442
988
8″
Price
MV70-50443
9812
12″
Price
98Z12
12″ w/case MV70-50444
Price
MV70-50445
9818
18″
Price
98Z18
18″ w/case MV70-50446
Price
MV70-66935
986
6″
$Price
MV70-66934
9812
12″
Price
98Z12
12″ w/case MV70-66933
Price
With SPC Output
Carry / Storage Case
For digital level / protractor
(Case does not include level)
Cylinder Squares
The squares are hardened and ends are
lapped to 90° angular accuracy with the
cylinders as follows:
6″ square to ± .00010
12″ square to ±. 00015
Includes fitted case.
These cylindrical squares are used in surface
plates as a 90° reference angle. Can be used
for checking squares, height gages and many
other instruments.
Magnetic Cylinder Square
Checks Squareness to
50 Millionths Inch
•D
esigned to easily check squareness,
parallelism, concentricity and runout
on component parts
• From steel selected and normalized to
insure stability and uniformity
Length
Base Dia.
Shaft Dia.
Order No.
4¹₂″
6¹₂″
1¹₂″
3¹₂″
¹₂″
1″
NJ50-MCS4
NJ50-MCS6
P-834
Price
$Price
Price
Mitutoyo’s Type 960 Precision Levels have
high precision longitudinal and transverse
vials which make it possible to check or
level surfaces to very high accuracies.
An exclusive MITUTOYO Adjustment
Screw permits readjustment of the levels after long usage.
Levels are made of high quality cast iron and feature precisely
ground V (140°) surfaces. Furnished with a fitted wooden case.
Sensitivity
G - 59
Master Precision Level
Diameter Sq.
Height
Weight
Order No.
Price
3″
4″
6″
12″
15 lbs.
44 lbs.
NN85-2750006
NN85-2750012
$Price
Price
Levels, Rules & Scribers
G - 60
Spirit Levels
Magnetic Precision
Spirit Level
Spirit Level
• Sensitivity: 4 sec., .0002″/ 10″, .02mm/m
• Overall Dimensions: 5-7/8″ x 1-9/16″ x 5-7/8″
• Checks and levels cylinder, horizontal and
verticle surfaces
• One prismatic and one flat measuring surface.
• Magnets insure complete adherance to vertical
surfaces of
parts and
vertical arbors
or shafts.
Operators on
milling and
boring units,
inspectors and
fitters work with
free hands.
• Includes
fitted case
Order No. NA55-53422058
Order No. NA55-53422048
$Price
$Price
Digi-Level
•Measuring Range: 360° (4 x 90°)
•Resolution: .05°
•Accuracy: ± .2° maximum error
•Repeatability: ±.1°
•Dimension: 4" L x 1" W x 3" H
•Voltage: Standard 9V Battery
•Battery Life: up to 250 hrs.
•Operating Temp: -5°C to 50°C (23°F to 122°F)
•Storage Temp: -20°C to 65°C (-4°F to 17°F)
•Weight: 1.1 lbs.
• $Price
The mini-MAG Protractor provides instant
360° digital inclination display of any
angle with the additional unique feature of
embedded magnets on two sides.
•
•
•
•
•
•
Embedded magnets with 35 lb. pull.
Measuring range: 360° (4 x 90°)
Resolution: .05°
Accuracy: ± .1°
Repeatability: ± .1°
Voltage: Standard 9V battery (250 hrs.)
Dimensions: L: 2.375" x W: 1.375" x H: 2.375"
Order No. NA55-54422450
NA55-52422078 NA55-52422079
Length
3.15″ (80mm)
6″ (150mm)
Width
2.64″ (67mm)
2.64″ (67mm)
Thickness
.667" (17.2mm)
1.18″ (30mm)
Center to center
distance of holes
1.378″ (35mm)
2.36″ (60mm)
Sensitivity
.001″/10″,
.0002″/10″,
.1mm/m 20 sec. .02mm/m, 4 sec.
Description
Order No.
3″ Cross Spirit Level
6″ Cross Spirit Level
NA55-52422078
NA55-52422079
Price
$ Price
Price
Clinotronic Plus
• Resolution of 0.01° (selectable)
• Adjustable base depth
• Display: use any units common to inclination measurements
• Desired units selected by push button
• Automatic setting of zero by push button command.
• Absolute or relative measuring mode selectable by push button
• Built-in calibration program
• Seal-tec technology for excellent performance
in difficult environmental conditions
• Interface connection RS-232 is integrated.
Special purpose cables available.
• Low battery indication
• No loss of calibration data by power failure
• Price includes calibration cable and case
The Xtra Value Digi-Level provides instant 360°
digital inclination display of any angle, aluminum
housing, with large LCD, reading hold, absolute
0° at sea level and supplied in vinyl pouch.
Order No. NA55-54422444
Specifications
• $Price
• Sensitivity: 10 sec., .0005″/ 10″, .05mm/m
• Overall Dimensions: 4″ x 1 3/8″ x 4″
• Two prismatic sides
• Insulated handle
• Ultra high quality
• Handscraped by
Swiss craftsmen
• Clear view of the
main vial can be
observed not only
from above but also
from both sides.
This full view allows
position of the
bubble to be read
easily.
Cross Spirit Level
• Used for leveling machines
& other apparatus.
• Screw-on type
• Fluid resistant
• Light weight
• Measuring range/capacity: ±45°/0-360°
• Response time: value available within 5 seconds.
• Sensitivity: Depending on units set-.01°
• Repeatability: <.01°
• Linearity: within 3 min. of arc
• Temp. coefficient: less than 0.01°/°C
• Data output: Serial
• Battery: Standard AA 1.5V
alkaline/130hrs or AA 3.0V
Mn02-lithium (for longer
operation – 300 hrs.)
• Housing: aluminum hard
anodized
• Dimensions: 4 x 3 x 1″
(100 x 75 x 30mm)
• Weight: 13 oz. (380 grams)
• Temp. range: operational
0 to 40°C.
Order No. NA55-54635601 •
$Price
P-835
Mirrors and Magnetic Pick Ups
Extended Reach Pocket Mirrors
I
F
D
A
J
H
B
E
C
Need to see around corners or tight spots?! Try these telescoping or
bendable inspection mirrors. Each rotates 360˚, swivel 180˚, slim profile
for tight spots, and have a non-slip, solvent-resistant comfort grip. 321S-A
can be bent to a permanent position or remove inside stiffening wire to
snake into position. 306TR has a pocket clip handle. 301 has a magnet
on the opposite end of the mirror and a pocket clip. 316M is a glass
3x magnifier.
G
Mirror (in.)
Ln. (in.)
Extended (in.)
Material
Wt. (lbs.)
A
B
C
D
E
F
G
H
I
J
2x2
1-1/2 Dia.
2x2
2-1/2 x 2
2-1/2 x 2
2 x 1-1/4
3 x 2-1/4
3-1/2 x 2-1/2
2-1/2 x 1-7/8
3-7/8 dia.
6-1/4
4-1/2
7
7-1/4
7
6-1/2
7-1/2
7-1/4
25
15-3/4
28
24
29
36-1/2
28-1/2
36-1/2
36-1/2
32-3/4
—
32-1/2
Glass
Glass
Acrylic
Magnifier
Stainless
Glass
Glass
Glass
Acrylic
Glass
0.10
0.07
0.21
0.18
0.18
0.17
0.15
0.21
0.35
0.51
Stainless steel shaft with swivel
extends to 34″ 10-lb. capacity
Order No. NB49-MG03 • $Price
3 Piece Telescoping Inspection Set
•1
0 lb. Telescoping
Magnetic Pick-Up
• 2" x 3" (51mm x 76mm)
Rectangular Mirror
• Clip-On Mini Light
• Convenient Ballistic Nylon
Storage Holster
• Precision engineered 750 Series
Versa-Grip™ handle for maximum performance
Order No. NE50-759903 • $Price
Mini Light w/Magnetic Pick-up
•M
ini Light is fastened
to a stainless steel
telescoping wand
molded into a
rugged high-impact
ABS plastic handle
• Telescope from 7-3/4" – 28-3/4" (197mm – 720mm)
• 4 "LR41" batteries with a battery life of 48 continuous hours
Order No.
Price
NE70-301
NE70-306TR
NE70-312A
NE70-316M
NE70-314SS
NE70-315
NE70-316
NE70-318
NE70-321S-A
NE70-375
$ Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Glass Inspection Mirrors
• These mirrors
facilitate
inspection of
inaccessible
workpieces and
machines by tool
makers, inspectors
and mechanics
A
B
•A
ll glass mirrors
adjust to any angle
and offer chrome plated
brass handles, some with
cushioned grip
Code
Mirror Size
A
1.25″ dia.
B
10.5″ dia.
B
2.25″ dia.
C
1″ × 2″ oval
D
3.5″ × 2″ rect.
Replacement mirror
Replacement mirror
C
D
Handle Length
8.5″ (fixed)
10.5″ (extends to 15″)
9″ (fixed)
with frame, for No. 557
with frame, for No. 560
Order No.
Price
NE50-555
NE50-557
NB49-MR362BH
NE50-558
NE50-560
NE50-557RMF
NE50-560RMF
$ Price
Price
Price
Price
Price
Price
Price
Metal Inspection Mirrors
• These durable metal
mirrors facilitate inspection
of inaccessible workpieces
and machines by tool
makers, inspectors and
mechanics
B
•A
ll mirrors are of heavy
duty construction and
include a handy carrying
pouch
Code
A
B
C
Mirror Size
A
C
Handle Length
1.25″ × 2″ rect. 9.75″ (extends to 26″)
2″ × 3.75″ rect. 10.75″ (extends to 26″)
3.75″ dia.
Order No.
NB49-MR370
NB49-MR371
NB49-MR385
Price
$ Price
Price
Price
Style
Telescoping Magnetic Pickup
Superlift Tools
P-840
G - 61
Bore Inspection Kits
G - 62
Hawkeye ® Precision Borescopes
See the Places You Always Needed to See…
But Couldn’t
• See inside of pipes, tubes, valves, meters, bores,
cross-holes, castings and injection molds
• Magnification of up to 25 times or more
• Portable and ready to use
• Built-in light source
• Bright clear images, straight-on or 90° view
Hawkeye Precision Borescope Kit Includes:
• Hawkeye Precision Borescope
• Hawkeye SideWays 90° Adapter
• Mini-Maglite ® flashlight with batteries
• Keyed Aluminum & ABS Carrying Case
Hawkeye ® Flexible Borescopes
The Hawkeye Flexible Borescope fits into places with restricted access, can
be flexed into places with tight access, and has “memory” to retain its working set. The Hawkeye Flexible Borescope brings illumination from a powerful,
portable Nova Light, through glass fibers to the subject. A clear, bright image
is returned to the eyepiece through 18,000 optical glass fibers, revealing
burrs, contaminants, or flaws in weld joints.
Outside diameter . . . . . . Borescope 0.310″, Mirror tip: 0.375″
Working length . . . . . . . . 39.4″
Direction of View . . . . . . 0° & 90° (with included mirror tip)
Field of View . . . . . . . . . 40°
Focal Distance . . . . . . . . 0.5″ to infinity
Light Source . . . . . . . . . Nova light with Xenon lamp and NiCd battery
(Charger included)
Includes lockable metal case with die-cut foam
Order No. MS46-HFB2A
$Price
P-842
Description
Hawkeye
Hawkeye
Hawkeye
Hawkeye
Hawkeye
Hawkeye
Hawkeye
Hawkeye
Hawkeye
Hawkeye
Super Slim 4″ Kit
Super Slim 8″ Kit
Slim 7″ Borescope with 90° Adapter
Slim 7″ Kit
Slim 12″ Kit
Slim 17″ Kit
Hardy 7″ Kit
Hardy 12″ Kit
Hardy 17″ Kit
Nova†
Order No.
MS46-80004
MS46-80008
MS46-81906
MS46-81907
MS46-81912
MS46-81917
MS46-80807
MS46-80812
MS46-80817
MS46-81412
Price
$Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Specifications
Working Length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7″ & 12″ & 17″
Tube Diameter . . . . . . . . . . Super Slim .109″, Slim .188″, Hardy .313″
Tube Material . . . . . . . . . . . . . . . . . . . . . . . . . Type 304 Stainless Steel
Field of View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40°
Direction of View . . . . . . . . . . . . . . . 0° from primary axis of borescope
Actual View . . . 6.5 mm @ 7 mm distance, 41mm @ 50 mm distance
Range of Focus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.04″ (1mm)
Resolution . . . . . . . . . . 45 line pairs per mm at 5 mm subject distance
Kit Weight (12″ Slim) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 lbs. 6 oz.
†The Hawkeye Nova™ is a portable, rechargeable Xenon light source 10 times
as bright as our standard light. Great for use in large cavities and bores, such as
pipes and engine cylinders.
Drill, Tap, Sheet Metal Gages
G - 63
Drill Gages Industrial – Hardened
1 – 60 Twist Drill and
Machine Screw Tap Gage
A to Z Alphabet Drill Gage
• Tells at a glance the correct size
tap drill for machine screw tap in
“NF” National Fine or “NC” National
Coarse thread series
• Shows the correct body size drill to
use
• 60 Sizes shown with number and
decimal equivalent of drill at each
hole
• Used to select or check drill sizes
from “A” to “Z”
• Each gage hole is marked by letter and its decimal equivalent from
.234 inch diameter through .413 inch
diameter
1.0 to 5.9mm Metric Twist Drill and Drill Rod Gage
1/16″ to 1/2″ Fractional Size
Drill Gage
61 – 80 Twist Drill and
Drill Rod Gage
• Gages 57 sizes from 1.0 to 5.9mm
• Gage shows metric sizes with decimal equivalents
• Gage has 29 measuring holes for
determining twist drill sizes from ¹⁄₁₆″
to ¹⁄₂″ in ¹⁄₆₄″ increments
• Shows drill sizes in inches and decimal equivalents
• U
sed to gage and select the correct
twist drill and steel drill rod in the
small size range from 61 through 80
• Each hole shows the size number
and the corresponding decimal equivalent
1.5 to 12.5mm Metric Twist Drill and Drill Rod Gage
$Price
Order No. NB40-5075 •
• Gages 30 sizes from 1.5 to 12.5mm
• Gage shows metric sizes with decimal equivalents
Drill Gages
• General’s drill gages are used to quickly and conveniently identify drill bit sizes
• Hole sizes and decimal equivalents are
permanently etched on the face
• No. 13 is 3″ × 1¹⁄₈″ wide; Nos. 14 & 15
are 5″ × 2″ wide
NE50-13
NE50-14
NE50-15
Description
Order No.
No. size drills 61 to 80
Fractional size drills
¹₁₆ to ¹₂ by 64ths
No. size drills 1 to 60
NE50-13
NE50-14
Price
Price
Price
NE50-15
Price
Drill Gage Sets
Sheet Metal Gage
Reference Table
• For gaging uncoated sheet metal,
plate iron and steel
• Gage numbers are U.S. Standard 0 to 36, based on weights in ounces
per square in.
• Decimal equivalents are on reverse side
• Chrome finished is hardened & tempered
• 3¹⁄₄″ Diameter, ³⁄₃₂″ thick
• Essential tap drill and decimal equivalents
reference table for toolmakers, machinists
and mechanics
• Front has machine screw size tap drill chart
for recommended 75 depth thread
• Back has decimal equivalents table in 64ths
from ¹₆₄″ to ⁶³₆₄″
• For National Fine and National Special
series of machine screws
• Convenient 6″ rule is graduated in 64ths
3-Piece Set Consists of Gages for Checking Drill Bit Sizes #1 thru #60,
Letter Sizes A thru Z, and
Fractional Sizes ¹₁₆ - ¹₂ × 64ths, Chromed
Order No. NE60-HMC958
$Price Set
Drill Gages
• Drill gages are used to quickly and
conveniently identify drill bit sizes
• Made of heavy gage steel, machined and
ground to close tolerances
• Hole sizes and decimal equivalents are
permanently etched on the face
P-860
Drill
Range
Size
W×L
Order No.
¹⁄₁₆–¹⁄₂ by
64ths
A–Z
#1–60
#61–80
2⁵⁄₁₆ × 6¹⁄₄
MV70-50677
$Price
2⁵⁄₁₆ × 6¹⁄₄
1¹⁄₂ × 5¹⁄₂
³⁄₄ × 2
MV70-50718
MV70-50676
MV70-51320
Price
Price
Price
Price
Drill, Tap, Sheet Metal Gages
G - 64
Wire Gages American Standard wire gage
for non-ferrous metals
U.S. Standard wire gage for sheet,
plate-iron and steel
• Gage sheets, plates and wire made of non-ferrous
metals such as copper, brass, aluminum, etc.
• Sizes range from 0 to 36
• Decimal equivalents shown on reverse side
• Gage is made to the recognized commercial
standard in the United States for uncoated
sheet metal, plate iron and steel, based on
weights in ounces per square foot
• Gage provides measurements from 0 to 36 on
one face; decimal equivalents on reverse side
Steel Wire Gage
For gaging iron wire, hot and cold rolled sheet
steel and in some cases sheet iron by the
English Standard Wire system also known as
Birmingham or Stubs. Satin finish. Tested after
hardening.
Range Gage Numbers
Order No.
Price
MV70-50678
1 to 36
For gaging steel wire and drill
rod to the American Steel & Wire
Company (Washburn & Moen)
Standard and checks sizes from
0 to 36. (Also known as United
States Steel Wire Gage). Decimal
equivalents on back. Satin finish.
Carefully tested for accuracy after
hardening.
$Price
Saw Blade Depth Gage
• Heavy duty, solid brass gage
makes saw adjustments easy.
Ideal tool for professional
carpenters, woodworkers and do-it-yourselfers
• Provides three graduations:
English increments in 1/8" to 2"
with mm equivalent and English
increments in 1/16" to 3/8" with
mm equivalent. Metric increments
from 3mm to 18mm
GRADS
• Stamped graduations
1/8" - 2" with mm
1/16" - 3/8" with mm
• Lacquer finish
Range Gage Numbers
0 to 36
Order No.
MV70-51321
U.S. Standard Gage – Hardened Sheet,
Plate Iron and Steel Gage
This gage is made to the United States standard for uncoated sheet,
plate iron and steel based on weights in ounce per square foot.
• Decimal equivalents on reverse side
Order No.
Price
NE50-22
$Price
Range: .3125"- .007"
• Carefully tested after hardening
$Price
3 mm - 18 mm
Drill Point Gage
Quick Check Screw Gage
Quick way to identify machine screws, bolts, wood screws, self tapping screws, standard size rivets, and common cotter pin sizes up to 5/16" (8mm).
• Insures correct drill point angle of 59° for better, faster cutting
• Accurately measures drill lip lengths
• An all-around tool — also can be used as plain rule, hook rule, depth
gage, try square and slide caliper Brand
Bevel
Head
Grad.
59°
32nds
Sliding Head Only
59°
32nds
Price
$Price
English Standard Wire Gage
Length
6"
6"
Hook Rule
Graduations
8ths, 16ths, quick
reading 32nds, 64ths
8ths, 16ths,
32nds, 64ths
Order No.
Price
MV70-50150
MV70-50151
$Price
Price
NB40-5070
Price
• 3" scale to check screw lengths
• Checker gives required drill size
for corresponding tap size and
proper drill size for like hole
• Threaded holes indicate threads
per inch while unthreaded
indicate size by number and
fractions of an inch
• Durable engineering plastic
Order No. NE50-714
$Price
P-861
Small Hole Gages
Small Hole Gages
Full-Ball Style
•R
egulate by turning knurled knob at end
of handle
• Accurately measures holes, slots, grooves
and recesses
• Measurements obtained by measuring ball
contact with micrometer
829A
829B
829C
829D
S829EZ
S829EZZ
English
Range
Metric
Range
.125 to .200″ 3.2 to 5.1mm
.200 to .300″ 5.1 to 7.6mm
.300 to .400″ 7.6 to 10.2mm
.400 to .500″ 10.2 to 12.7mm
Set of Four (4) in case
Case Only
Order No.
Price
MV70-53070 $ Price
MV70-53071 Price
MV70-53072 Price
MV70-53073 Price
MV70-53074 Price
MV70-55391 Price
Packed one in a box — Individually or sets
• Knurled knob for adjusting contacts
• Hardened contacts
• Long length
• Knurled knob for adjusting contacts
• Hardened contacts
Starrett
No.
831A
831B
831C
831D
S831EZ
S831EZZ
English
Range
Metric Range
Order No.
.125 to .200″ 3.2 to 5.1mm
.200 to .300″ 5.1 to 7.6mm
.300 to .400″ 7.6 to 10.2mm
.400 to .500″ 10.2 to 12.7mm
Set of four (4) in case
Case Only
Price
Starrett
No.
MV70-53083 $Price
MV70-53084 Price
MV70-53085 Price
MV70-53086 Price
MV70-53087 Price
MV70-55393 Price
830A
830B
830C
830D
830E
S830FZ
S830FZZ
Length Approximately:
831A–2¹³⁄₁₆″; 831B–3¹⁄₈″; 831C–3³⁄₈″; 831D–3¹⁄₂″
English
Range
Metric
Range
Order No.
.125 to .150″ 3.2 to 3.8mm
.150 to .200″ 3.8 to 5.1 mm
.200 to .300″ 5.1 to 7.6 mm
.300 to .400″ 7.6 to 10.2mm
.400 to .500″ 10.2 to 12.7mm
Set of five (5) in case
Case only
Price
MV70-53076 $ Price
MV70-53077 Price
MV70-53078 Price
MV70-53079 Price
MV70-53080 Price
MV70-53081 Price
MV70-55392 Price
Small Hole Gages
(.125″ to .500″) Extra long for gaging deep and shallow holes, slots
and similar work.
• Gaging surface is a full-round with a flat
bottom; permits use in smallest of shallow
holes, slots and grooves, etc.
• Knurled knob at end of handle is used
for size adjustment. Hole size is
obtained by measuring over the
contact points with a micrometer
• Gaging surface is fully hardened
to insure long tool life
• Supplied 4 gages in a fitted case
Small Hole Gage ¹₈″ - ¹₂″
•K
nurled knob for size adjustment
• Gaging surface fully hardened for
long life
• Extra long for gaging deep &
shallow holes
• Hole size obtained by measuring
over contact points with
micrometer
Range .125 - .500”
MT80-154-901
(Set of 4)
Case Included
Order No. NN40-290200
Starrett
No.
G - 65
Small Hole Gages
Full-Ball, Short Style
Small Hole Gages
Half-Ball Style
Probe Depth
(L)
$Price
Range Inches /mm
.125″-.200″ (3-5mm)
.200″-.300″ (5-7.5mm)
.300″-.400″ (7.5-10mm)
.400″-.500″ (10-13mm)
Overall
Length
Probe
Depth (L)
3-5/8″
3-7/8″
4″
4-1/4″
Set of 4
.880″
1.200″
1.600″
1.600″
Gages
.125″-.500″ (3-13mm)
Small Hole Gages
Order No.
Price
MT80-154-105
MT80-154-106
MT80-154-107
MT80-154-108
$Price
Price
Price
Price
MT80-154-901
Price
Small Hole Gage Set
Range .125″ to .500″ (3.18 to 12.7mm)
•G
aging surface is fully
hardened
• Set supplied in fitted case
Capacity
Order No.
Price
4 Pc. Set — Sizes A-D
4 Pc. Set — A-D Full Ball
Size A — .125 -.200″
Size B — .200 -.300″
Size C — .300 -.400″
Size D — .400 -.500″
NB40-4S4
NB40-4S4FB
NB40-4A
NB40-4B
NB40-4C
NB40-4D
$Price
Price
Price
Price
Price
Price
Order No.
Price
MV45-51885
$Price
Order No.
Price
NA55-52472104
$Price
P-863
Thread Gaging Accessories
FLYNN English or Metric Thread Measuring
Sets in Leatherette Case
Consists of 16 sets of
3 stainless steel wires,
3 inches long, accurate to
tolerance of plus or minus
.001″. Supplied in handy
leatherette case with chart
showing dimensions
for measuring threads
40 to 3 TPI.
Order No.
Price
English
Metric
GE50-11
GE50-11M
$Price
Price
Checks all standard 60 degree threads for Class of Thread Fit.
To find out the class of thread fit, just attach the triangles to your
micrometer with the rubber holders. Insert into thread, and mike the
distance over the thread.
Refer to our included chart to read the class of fit. Each set includes
a pair of triangles, 2 rubber holders, and reference chart.
Mic NOT Included.
Order No. NB75-Z9035 • $Price
P.D. Check™ Thread Wire Attachment System
Micrometer Thread Tip
Attachments for Micrometer w/.270″
Diameter Anvil & Spindles
Patented
Makes thread triangles,
thread MIC’s and all other
current methods obsolete!
• Fits all micrometers
with .245 to .312 anvils
• No more lost thread
wire in the chip pans
• Each part fits 2 sizes
of wires
Micrometer
not included
Includes:
.018″-.022″ (Purple)
.024″-.032″ (Blue)
.040″-.045″ (Yellow)
.055″-.063″ (Green)
.072″-.081″ (Red)
Fast, Accurate
Measurement!
Set of 5 Color-Coded Holders
Order No. GG45-16707 • $Price
VALUE PACKAGE!
P.D. Check Set &
Thread Measuring Wire Set
Adapts a regular outside micrometer to measure threads. Each tip is
approximately .150″ long: The set of two are approximately .300″.
This dimension must be subtracted when reading is taken.
Sold in pairs.
For Threads
Order No.
Price Per Pair
8-13 Per Inch
MX50-19T813*
$Price
Double End Plug Thread Gages With Handle
Available in unified inch coarse, unified inch fine
and ISO metric threads
Unified Thread
Inch Size
$Price
Order No. NB65-16707W
$Price
Thread Measuring Wire Sets
UNC Gage-Class 2B
Size
Order No.
Order No. NB53-16 • $Price Per Set
Pee Dee Made in U.S.A.
Order No. NG49-16 • $Price
P-870
ISO Thread
Metric Size
$Price
• 48 Wires — 16 different sizes
• Measures all threads from
3 to 48 threads per inch
• Complete in plastic case
with thread chart
Type
G - 66
Thread Measuring Triangles
4-40
6-32
8-32
10-24
¹⁄₄-20
⁵⁄₁₆-18
³⁄₈-16
⁷⁄₁₆-14
¹⁄₂-13
UNF Gage-Class 2B
Size
Order No.
Metric Class 6H
Size
Order No.
NB73-04402B 4-48 NB73-04482B 2.0 ×
NB73-06322B 6-40 NB73-06402B 2.5 ×
NB73-08322B 8-36 NB73-08362B 3.0 ×
NB73-10242B 10-32 NB73-10322B 4.0 ×
NB73-16202B ¹⁄₄-28 NB73-16282B 5.0 ×
NB73-20182B ⁵⁄₁₆-24 NB73-20242B 6.0 ×
NB73-24162B ³⁄₈-24 NB73-24242B 8.0 ×
NB73-28142B ⁷⁄₁₆-20 NB73-28202B 10.0 ×
NB73-32132B ¹⁄₂-20 NB73-32202B 12.0 ×
0.40
0.45
0.50
0.70
0.80
1.00
1.25
1.50
1.75
mm
mm
mm
mm
mm
mm
mm
mm
mm
NB73-020406H
NB73-025456H
NB73-030506H
NB73-040706H
NB73-050806H
NB73-060106H
NB73-081256H
NB73-101506H
NB73-121756H
Plug & Ring Go/No-Go Thread Gages Sets
Double End Thread Plug Gages With Handle & Short Form Certification
Other sizes, pitches and
classes available.
Short Form Certification
included with each Gage
At No Additional Charge
Add $20.00 per Member
For Long Form
Finest Wear Resistant Steel — Lapped Finish
UNC Sizes — 2B Class
UNF Sizes — 2B Class
G - 67
Metric Sizes — 6H Class
Pitch
Order No.
Price
Pitch
Order No.
Price
Size
Pitch
Order No.
Price
0
1
2
3
4
5
6
8
10
12
1/4
5/16
3/8
7/16
1/2
9/16
5/8
3/4
7/8
1
1¹⁄₈
1¹⁄₄
1³⁄₈
1¹⁄₂
—
64
56
48
40
40
32
32
24
24
20
18
16
14
13
12
11
10
9
8
7
7
6
6
—
EY52-001642B
EY52-002562B
EY52-003482B
EY52-004402B
EY52-005402B
EY52-006322B
EY52-008322B
EY52-010242B
EY52-012242B
EY52-040202B
EY52-050182B
EY52-060162B
EY52-070142B
EY52-080132B
EY52-090122B
EY52-100112B
EY52-120102B
EY52-140092B
EY52-160082B
EY52-180072B
EY52-200072B
EY52-220062B
EY52-240062B
—
$ Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
80
72
64
56
48
44
40
36
32
28
28
24
24
20
20
18
18
16
14
12
12
12
12
12
EY52-000802B
EY52-001722B
EY52-002642B
EY52-003562B
EY52-004482B
EY52-005442B
EY52-006402B
EY52-008362B
EY52-010322B
EY52-012282B
EY52-040282B
EY52-050242B
EY52-060242B
EY52-070202B
EY52-080202B
EY52-090182B
EY52-100182B
EY52-120162B
EY52-140142B
EY52-160122B
EY52-180122B
EY52-200122B
EY52-220122B
EY52-240122B
$ Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
1.60mm
2.00mm
2.50mm
3.00mm
3.50mm
4.00mm
4.50mm
5.00mm
6.00mm
7.00mm
8.00mm
8.00mm
10.00mm
10.00mm
12.00mm
12.00mm
14.00mm
14.00mm
16.00mm
16.00mm
18.00mm
18.00mm
20.00mm
20.00mm
0.35
0.40
0.45
0.50
0.60
0.70
0.75
0.80
1.00
1.00
1.00
1.25
1.25
1.50
1.25
1.75
1.50
2.00
1.50
2.00
1.50
2.50
1.50
2.50
EY52-163506H
EY52-204006H
EY52-254506H
EY52-305006H
EY52-356006H
EY52-407006H
EY52-457006H
EY52-508006H
EY52-601006H
EY52-701006H
EY52-801006H
EY52-801256H
EY52-101256H
EY52-101506H
EY52-121256H
EY52-121756H
EY52-141506H
EY52-142006H
EY52-161506H
EY52-162006H
EY52-181506H
EY52-182506H
EY52-201506H
EY52-202506H
$ Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Go/No-Go Ring Gage With Short Form Certification (Without Holder)
• Made by the finest gage Manufacturers
• Finest Wear-Resistant Steel — Lapped Finish
• Treated & Processed for Long Life & Stability
UNC Sizes — 2A Class
Size
Pitch
Order No.
0
1
2
3
4
5
6
8
10
12
1/4
5/16
3/8
7/16
1/2
9/16
5/8
3/4
7/8
1
1¹⁄₈
1¹⁄₄
1³⁄₈
1¹⁄₂
—
64
56
48
40
40
32
32
24
24
20
18
16
14
13
12
11
10
9
8
7
7
6
6
—
EY55-001642A
EY55-002562A
EY55-003482A
EY55-004402A
EY55-005402A
EY55-006322A
EY55-008322A
EY55-010242A
EY55-012242A
EY55-040202A
EY55-050182A
EY55-060162A
EY55-070142A
EY55-080132A
EY55-090122A
EY55-100112A
EY55-120102A
EY55-140092A
EY55-160082A
EY55-180072A
EY55-200072A
EY55-220062A
EY55-240062A
UNF Sizes — 2A Class
Price
—
$Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Pitch
Order No.
80
72
64
56
48
44
40
36
32
28
28
24
24
20
20
18
18
16
14
12
12
12
12
12
EY55-000802A
––
EY55-002642A
EY55-003562A
EY55-004482A
EY55-005442A
EY55-006402A
EY55-008362A
EY55-010322A
EY55-012282A
EY55-040282A
EY55-050242A
EY55-060242A
EY55-070202A
EY55-080202A
EY55-090182A
EY55-100182A
EY55-120162A
EY55-140142A
EY55-160122A
EY55-180122A
EY55-200122A
EY55-220122A
EY55-240122A
Size
Metric Sizes — 6G Class
Price
$Price
—
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Size
Pitch
Order No.
1.60mm
2.00mm
2.50mm
3.00mm
3.50mm
4.00mm
4.50mm
5.00mm
6.00mm
7.00mm
8.00mm
8.00mm
10.00mm
10.00mm
12.00mm
12.00mm
14.00mm
14.00mm
16.00mm
16.00mm
18.00mm
18.00mm
20.00mm
20.00mm
0.35
0.40
0.45
0.50
0.60
0.70
0.75
0.80
1.00
1.00
1.00
1.25
1.25
1.50
1.25
1.75
1.50
2.00
1.50
2.00
1.50
2.50
1.50
2.50
EY55-163506G
EY55-204006G
EY55-254506G
EY55-305006G
EY55-356006G
EY55-407006G
EY55-457006G
EY55-508006G
EY55-601006G
EY55-701006G
EY55-801006G
EY55-801256G
EY55-101256G
EY55-101506G
EY55-121256G
EY55-121756G
EY55-141506G
EY55-142006G
EY55-161506G
EY55-162006G
EY55-181506G
EY55-182506G
EY55-201506G
EY55-202506G
Price
$Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
P-871
Thread Plug Gages
G - 68
Go Thread Plug Gages with Short Form Certification (without Handle)
For Long Form
Finest wear resistant steel
lapped finish
classes available.
Pitch
Order No.
Price
Pitch
Order No.
Price
Size
Pitch
Order No.
Price
0
1
2
3
4
5
6
8
10
12
1/4
5/16
3/8
7/16
1/2
9/16
5/8
3/4
7/8
1
1¹⁄₈
1¹⁄₄
1³⁄₈
1¹⁄₂
—
64
56
48
40
40
32
32
24
24
20
18
16
14
13
12
11
10
9
8
7
7
6
6
—
EY50-001642B
EY50-002562B
EY50-003482B
EY50-004402B
EY50-005402B
EY50-006322B
EY50-008322B
EY50-010242B
EY50-012242B
EY50-040202B
EY50-050182B
EY50-060162B
EY50-070142B
EY50-080132B
EY50-090122B
EY50-100112B
EY50-120102B
EY50-140092B
EY50-160082B
EY50-180072B
EY50-200072B
EY50-220062B
EY50-240062B
—
$Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
80
72
64
56
48
44
40
36
32
28
28
24
24
20
20
18
18
16
14
12
12
12
12
12
EY50-000802B
EY50-001722B
EY50-002642B
EY50-003562B
EY50-004482B
EY50-005442B
EY50-006402B
EY50-008362B
EY50-010322B
EY50-012282B
EY50-040282B
EY50-050242B
EY50-060242B
EY50-070202B
EY50-080202B
EY50-090182B
EY50-100182B
EY50-120162B
EY50-140142B
EY50-160122B
EY50-180122B
EY50-200122B
EY50-220122B
EY50-240122B
$Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
1.60mm
2.00mm
2.50mm
3.00mm
3.50mm
4.00mm
4.50mm
5.00mm
6.00mm
7.00mm
8.00mm
8.00mm
10.00mm
10.00mm
12.00mm
12.00mm
14.00mm
14.00mm
16.00mm
16.00mm
18.00mm
18.00mm
20.00mm
20.00mm
0.35
0.40
0.45
0.50
0.60
0.70
0.75
0.80
1.00
1.00
1.00
1.25
1.25
1.50
1.25
1.75
1.50
2.00
1.50
2.00
1.50
2.50
1.50
2.50
EY50-163506H
EY50-204006H
EY50-254506H
EY50-305006H
EY50-356006H
EY50-407006H
EY50-457006H
EY50-508006H
EY50-601006H
EY50-701006H
EY50-801006H
EY50-801256H
EY50-101256H
EY50-101506H
EY50-121256H
EY50-121756H
EY50-141506H
EY50-142006H
EY50-161506H
EY50-162006H
EY50-181506H
EY50-182506H
EY50-201506H
EY50-202506H
$Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
No Go Thread Plug Gages with Short Form Certification (without Handle)
Size
Pitch
Order No.
Price
Pitch
Order No.
Price
Size
Pitch
Order No.
Price
0
1
2
3
4
5
6
8
10
12
1/4
5/16
3/8
7/16
1/2
9/16
5/8
3/4
7/8
1
1¹⁄₈
1¹⁄₄
1³⁄₈
1¹⁄₂
—
64
56
48
40
40
32
32
24
24
20
18
16
14
13
12
11
10
9
8
7
7
6
6
—
EY51-001642B
EY51-002562B
EY51-003482B
EY51-004402B
EY51-005402B
EY51-006322B
EY51-008322B
EY51-010242B
EY51-012242B
EY51-040202B
EY51-050182B
EY51-060162B
EY51-070142B
EY51-080132B
EY51-090122B
EY51-100112B
EY51-120102B
EY51-140092B
EY51-160082B
EY51-180072B
EY51-200072B
EY51-220062B
EY51-240062B
—
$Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
80
72
64
56
48
44
40
36
32
28
28
24
24
20
20
18
18
16
14
12
12
12
12
12
EY51-000802B
EY51-001722B
EY51-002642B
EY51-003562B
EY51-004482B
EY51-005442B
EY51-006402B
EY51-008362B
EY51-010322B
EY51-012282B
EY51-040282B
EY51-050242B
EY51-060242B
EY51-070202B
EY51-080202B
EY51-090182B
EY51-100182B
EY51-120162B
EY51-140142B
EY51-160122B
EY51-180122B
EY51-200122B
EY51-220122B
EY51-240122B
$Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
1.60mm
2.00mm
2.50mm
3.00mm
3.50mm
4.00mm
4.50mm
5.00mm
6.00mm
7.00mm
8.00mm
8.00mm
10.00mm
10.00mm
12.00mm
12.00mm
14.00mm
14.00mm
16.00mm
16.00mm
18.00mm
18.00mm
20.00mm
20.00mm
0.35
0.40
0.45
0.50
0.60
0.70
0.75
0.80
1.00
1.00
1.00
1.25
1.25
1.50
1.25
1.75
1.50
2.00
1.50
2.00
1.50
2.50
1.50
2.50
EY51-163506H
EY51-204006H
EY51-254506H
EY51-305006H
EY51-356006H
EY51-407006H
EY51-457006H
EY51-508006H
EY51-601006H
EY51-701006H
EY51-801006H
EY51-801256H
EY51-101256H
EY51-101506H
EY51-121256H
EY51-121756H
EY51-141506H
EY51-142006H
EY51-161506H
EY51-162006H
EY51-181506H
EY51-182506H
EY51-201506H
EY51-202506H
$Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
American National Taper Pipe
Thread Plug Gages
Size
Pitch
Order No.
Price
Order No.
Price
1/16
1/8
1/4
3/8
1/2
3/4
1
1¹⁄₄
1¹⁄₂
2
2¹⁄₂
3
27
27
18
18
14
14
11¹⁄₂
11¹⁄₂
11¹⁄₂
11¹⁄₂
8
8
EY60-001NPTL1
EY60-002NPTL1
EY60-004NPTL1
EY60-006NPTL1
EY60-008NPTL1
EY60-012NPTL1
EY60-016NPTL1
EY60-020NPTL1
EY60-024NPTL1
EY60-032NPTL1
EY60-040NPTL1
EY60-048NPTL1
$ Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
EY60-001NPTFL1
EY60-002NPTFL1
EY60-004NPTFL1
EY60-006NPTFL1
EY60-008NPTFL1
EY60-012NPTFL1
EY60-016NPTFL1
EY60-020NPTFL1
EY60-024NPTFL1
EY60-032NPTFL1
EY60-040NPTFL1
EY60-048NPTFL1
$ Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
P-872
Handle Sold
Separately.
ANPT and
Six-Step available.
Call for price
and delivery.
Size
Plug Gage
Handles Only
#0 - #3
#4 - #6
#8 - #12
1/4″ to 5/16″
Short Form
3/8″ to 1/2″
Certification included
9/16″ to 13/16″
with Each Gage
7/8″ to 1¹⁄₈″
At No Additional
1³⁄₁₆″ to 1¹⁄₂″
Charge
Add $30.00 per Member and 1″ to 2″ NTP
2¹⁄₂″ to 3″ NTP
For Long Form
Range
( 1.50mm to 2.67mm)
( 2.68mm to 3.81mm)
( 3.82mm to 5.84mm)
( 5.85mm to 9.27mm)
( 9.28mm to 12.95mm)
(12.96mm to 20.95mm)
(20.96mm to 28.83mm)
(28.84mm to 38.35mm)
Order No.
Price
EY56-000P $ Price
EY56-00P
Price
EY56-0P
Price
EY56-1P
Price
EY56-2P
Price
EY56-3P
Price
EY56-4P
Price
EY56-5P
Price
EY56-6P
Price
Thread Ring Gages
G - 69
Go Thread Ring Gages With Short Form Certification
• Made by the finest gage Manufacturers
• Finest Wear-Resistant steel — Lapped Finish
• Treated & Processed for Long Life & Stability
Pitch
Order No.
0
1
2
3
4
5
6
8
10
12
1/4
5/16
3/8
7/16
1/2
9/16
5/8
3/4
7/8
1
1¹⁄₈
1¹⁄₄
1³⁄₈
1¹⁄₂
—
64
56
48
40
40
32
32
24
24
20
18
16
14
13
12
11
10
9
8
7
7
6
6
—
EY53-001642A
EY53-002562A
EY53-003482A
EY53-004402A
EY53-005402A
EY53-006322A
EY53-008322A
EY53-010242A
EY53-012242A
EY53-040202A
EY53-050182A
EY53-060162A
EY53-070142A
EY53-080132A
EY53-090122A
EY53-100112A
EY53-120102A
EY53-140092A
EY53-160082A
EY53-180072A
EY53-200072A
EY53-220062A
EY53-240062A
Price
Pitch
Order No.
80
72
64
56
48
44
40
36
32
28
28
24
24
20
20
18
18
16
14
12
12
12
12
12
EY53-000802A
EY53-001722A
EY53-002642A
EY53-003562A
EY53-004482A
EY53-005442A
EY53-006402A
EY53-008362A
EY53-010322A
EY53-012282A
EY53-040282A
EY53-050242A
EY53-060242A
EY53-070202A
EY53-080202A
EY53-090182A
EY53-100182A
EY53-120162A
EY53-140142A
EY53-160122A
EY53-180122A
EY53-200122A
EY53-220122A
EY53-240122A
—
$Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
For Long Form
Price
$Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Size
Pitch
Order No.
1.60mm
2.00mm
2.50mm
3.00mm
3.50mm
4.00mm
4.50mm
5.00mm
6.00mm
7.00mm
8.00mm
8.00mm
10.00mm
10.00mm
12.00mm
12.00mm
14.00mm
14.00mm
16.00mm
16.00mm
18.00mm
18.00mm
20.00mm
20.00mm
0.35
0.40
0.45
0.50
0.60
0.70
0.75
0.80
1.00
1.00
1.00
1.25
1.25
1.50
1.25
1.75
1.50
2.00
1.50
2.00
1.50
2.50
1.50
2.50
EY53-163506G
EY53-204006G
EY53-254506G
EY53-305006G
EY53-356006G
EY53-407006G
EY53-457006G
EY53-508006G
EY53-601006G
EY53-701006G
EY53-801006G
EY53-801256G
EY53-101256G
EY53-101506G
EY53-121256G
EY53-121756G
EY53-141506G
EY53-142006G
EY53-161506G
EY53-162006G
EY53-181506G
EY53-182506G
EY53-201506G
EY53-202506G
Price
$Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
No-Go Thread Ring Gage With Short Form Certification
Size
Pitch
Order No.
0
1
2
3
4
5
6
8
10
12
1/4
5/16
3/8
7/16
1/2
9/16
5/8
3/4
7/8
1
1¹⁄₈
1¹⁄₄
1³⁄₈
1¹⁄₂
—
64
56
48
40
40
32
32
24
24
20
18
16
14
13
12
11
10
9
8
7
7
6
6
—
EY54-001642A
EY54-002562A
EY54-003482A
EY54-004402A
EY54-005402A
EY54-006322A
EY54-008322A
EY54-010242A
EY54-012242A
EY54-040202A
EY54-050182A
EY54-060162A
EY54-070142A
EY54-080132A
EY54-090122A
EY54-100112A
EY54-120102A
EY54-140092A
EY54-160082A
EY54-180072A
EY54-200072A
EY54-220062A
EY54-240062A
Price
Pitch
Order No.
80
72
64
56
48
44
40
36
32
28
28
24
24
20
20
18
18
16
14
12
12
12
12
12
EY54-000802A
EY54-001722A
EY54-002642A
EY54-003562A
EY54-004482A
EY54-005442A
EY54-006402A
EY54-008362A
EY54-010322A
EY54-012282A
EY54-040282A
EY54-050242A
EY54-060242A
EY54-070202A
EY54-080202A
EY54-090182A
EY54-100182A
EY54-120162A
EY54-140142A
EY54-160122A
EY54-180122A
EY54-200122A
EY54-220122A
EY54-240122A
—
$Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
$Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Size
Pitch
Order No.
27
27
18
18
14
14
11¹⁄₂
11¹⁄₂
11¹⁄₂
11¹⁄₂
8
8
EY61-001NPTL1
EY61-002NPTL1
EY61-004NPTL1
EY61-006NPTL1
EY61-008NPTL1
EY61-012NPTL1
EY61-016NPTL1
EY61-020NPTL1
EY61-024NPTL1
EY61-032NPTL1
EY61-040NPTL1
EY61-048NPTL1
Price
$Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Order No.
EY61-001NPTFL1
EY61-002NPTFL1
EY61-004NPTFL1
EY61-006NPTFL1
EY61-008NPTFL1
EY61-012NPTFL1
EY61-016NPTFL1
EY61-020NPTFL1
EY61-024NPTFL1
EY61-032NPTFL1
EY61-040NPTFL1
EY61-048NPTFL1
Price
$Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Pitch
Order No.
1.60mm
2.00mm
2.50mm
3.00mm
3.50mm
4.00mm
4.50mm
5.00mm
6.00mm
7.00mm
8.00mm
8.00mm
10.00mm
10.00mm
12.00mm
12.00mm
14.00mm
14.00mm
16.00mm
16.00mm
18.00mm
18.00mm
20.00mm
20.00mm
0.35
0.40
0.45
0.50
0.60
0.70
0.75
0.80
1.00
1.00
1.00
1.25
1.25
1.50
1.25
1.75
1.50
2.00
1.50
2.00
1.50
2.50
1.50
2.50
EY54-163506G
EY54-204006G
EY54-254506G
EY54-305006G
EY54-356006G
EY54-407006G
EY54-457006G
EY54-508006G
EY54-601006G
EY54-701006G
EY54-801006G
EY54-801256G
EY54-101256G
EY54-101506G
EY54-121256G
EY54-121756G
EY54-141506G
EY54-142006G
EY54-161506G
EY54-162006G
EY54-181506G
EY54-182506G
EY54-201506G
EY54-202506G
Price
$Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
Price
ANPT and
Six-Step available.
Call for price
and delivery.
American National Taper Pipe
Thread Ring Gages
1/16
1/8
1/4
3/8
1/2
3/4
1
1¹⁄₄
1¹⁄₂
2
2¹⁄₂
3
Size
Size
classes available.
Ring Gage
Holder
Short Form
Certification included
with Each Gage
At No Additional
Charge
For Long Form
Range
#0 - #12
1/4″ to 5/16″
3/8″ to 1/2″
9/16″ to 13/16″
7/8″ to 1¹⁄₈″
1³⁄₁₆″ to 1¹⁄₂″
( 1.6mm to 6.0mm)
( 7.0mm to 8.0mm)
( 9.0mm to 12.0mm)
(14.0mm to 18.0mm)
(20.0mm to 28.0mm)
(30.0mm to 39.0mm)
Order No.
Price
EY56-1R
EY56-2R
EY56-3R
EY56-4R
EY56-5R
EY56-6R
$Price
Price
Price
Price
Price
Price
P-873
Pitch & Center Gages
G - 70
Screw Pitch Gages
Screw Pitch Gages
Type of
Blades
No. of
Blades
No. of
Groups
Blades
Included
English Gage
English Gage
English Gage
Metric Gage
English / Metric
51
22
28
18
28
3
2
2
2
2
Metric Gage
English Gage
English Gage
28
28
30
2
2
2
4 – 84 inch
9 – 40 inch
4 – 80 inch
0.50 – 7.00mm
4 – 56 inch,
0.50 – 6.00mm
0.25 – 2.50mm
2¹⁄₄ – 28 inch
4 – 42 inch
Order No.
Price
NB40-5651
NB40-5622
NB40-5628
NB40-5617†
NB40-5629
$Price
Price
Price
Price
Price
NB40-5625
NB40-5626†
NB40-5642
Price
Price
Price
† Center Gage with coarse and fine notch included
Pitch Gages
• Pitch size stamped on
each gage
• Whitworth, Unified and
Metric Pitch Gages
available
Center Gages
Hardened with lapped edges and
notches according to American
and U.S. 60° Standards.
Features # 52-470 Series
• Pressure angle 14.5°
• Involute Gear Tooth Gages easily determine pitch diameter of
involute gears from 6-80 and 2-5 in inch and .5-5 and 6-12 in metric
Features # 52-485-015, 020, & 051
• Narrow designed blades permit use for internal and external
screw threads
• Locking device at each end to secure all blades for storage or
position
• Correct pitch is determined by matching blade teeth with threads
• Precisely ground and finished
• Blades marked with thread size
Features # 52-485-030
• Acme Screw Pitch Gages (29° angle) made of fine stainless steel.
Each blade is 3″/ 90mm long and .03″ / .8mm thick.
$Price
Description
Pitch Gages
Inches
Range
No. of
Leaves
Description
Order No.
Price
4-42TPI
4-60TPI
4-42TPI
4-84TPI
30
28
30
51
Whitworth 55°
Whitworth 55°
Unified 60°
Unified 60°
MT80-188-101
MT80-188-102
MT80-188-111
MT80-950-253
$Price
Price
Price
Price
Order No.
Price
MT80-188-121
$Price
MT80-188-122
Price
MT80-188-151
Price
Metric
0.4, 0.5, 0.75, 1, 1.25, 1.5, 1.75,
2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6,
6.5, 7mm
0.4, 0.5, 0.7, 0.75, 0.8, 0.9, 1,
0.4-7mm (21 leaves) 1.25, 1.5, 1.75, 2, 2.5, 3, 3.5, 4,
4.5, 5, 5.5, 6, 6.5, 7mm
4-42 TPI English 30 leaves 0.4-7mm Metric (21 leaves)
0.4-7mm (18 leaves)
P-874
Involute Gear Tooth Gages — Inch Series; 14 leaves
w/ring holder. Pitch range: 6, 7, 8, 9, 10, 11, 12, 14,
16, 18, 20, 22, 24, 26, 28, 30, 32, 36, 40, 48, 64, 80
Involute Gear Tooth Gages — Inch Series; 7 leaves
w/ring holder. Pitch range: 2, 2¹⁄₂″, 3, 3¹⁄₂″, 4, 4¹⁄₂″, 5
Involute Gear Tooth Gages — Metric Series; 13 leaves
w/ring holder. Pitch range: 0.5, 0.75, 1.0, 1.25, 1.5,
1.75, 2, 2.5, 2.75, 3, 3.25, 3.5, 3.75, 4.0, 4.5, 5
Involute Gear Tooth Gages — Metric Series; 7 leaves
w/ring holder. Pitch range: 6, 7, 8, 9, 10, 11, 12
Screw Pitch Gage with 30 blades, Inch Series;
4 to 42 pitch standard V thread
Screw Pitch Gage with 51 blades, Inch Series;
4 to 84 pitch standard V thread
Screw Pitch Gage with 24 blades, Metric Series;
0.25mm to 6.0mm
Acme Screw Pitch Gage with 16 blades
(1, 1¹⁄₃, 1¹⁄₂, 1³⁄₄, 2, 2¹⁄₂, 3, 3¹⁄₂, 4, 5, 6, 7,
8, 9, 10 & 12 pitch); 29° angle
Thread Measuring Wire Set, 48 wires (16 sizes).
Accuracy within +0/-.0004″ for sizes .018″ - .108″.
Accuracy within +0/-.0005″ for sizes .120″ - .185″.
Measures all US 60° threads from 3-48 threads
per inch. Laminated conversion chart included.
Order No.
Price
NA55-52470140
$Price
NA55-52470141
Price
NA55-52470150
Price
NA55-52470151
Price
NA55-52485015
Price
NA55-52485051
Price
NA55-52485020
Price
NA55-52485030
Price
NA55-52485048
Price
• Narrow designed blades permit use for internal and external
screw threads
• Correct pitch is determined by matching blade teeth with threads
• Each blade made from finest quality steel available
• Each blade clearly marked with proper thread size
• Blades protected in sturdy steel case
• Locking device at each end to secure all blades for storage, or
position an individual blade for use
Pitch & Center Gages
G - 71
Center Gages
Useful for finding the number of threads per
inch. By means of graduations in 14ths, 20ths,
24ths and 32nds of an inch.
Satin Finish with Plastic Case
Order No. NE60-CG60 • $Price
Type
Description
Order No.
Price
American National 14th and 20ths graduations provided on one side, 24ths NB40-5031
or U.S. Standard
and 32nds on reverse side. Gage also features a table
Center Gage
of double depths of threads for selecting size of tap drills.
NB40-5032
Metric Center Gage
Graduated in mm and 0.5mm
$Price
Price
• General’s center gages improve efficiency & speed up setups for lathe thread cutting
• The gages are etched in graduations of 14ths,
20ths, 24ths & 32nds of an inch for checking the
number of threads per inch
• 60° angles for U.S. standard threads and double
depth of American National thread
• Made of tempered and ground stainless steel
• Notches have clearance slots
Order No. NE50-CF778 • $Price
Satin Chrome Finish
Range
Pitch
Screw Pitch Gages
Price
$Price
MV70-51477
Price
MV70-51478
Price
Acme Screw Pitch Gages
Screw Pitch Gages
Available in a wide range of sizes with different
numbers of leaves in various pitch ranges for
gaging V, Unified, American National and U.S.
Standard 60° threads and Whitworth Standard 55°
threads. All have a locking device at both ends
of case for locking any leaf of leaves in desired
position. Leaves on all gages have special narrow
design for easy checking of internal threads in
nuts, etc. and flatted teeth for checking both V and
American National or U.S. Standard threads. Each
leaf stamped with number of threads per inch.
Order No.
MV70-51475
Leaves
No. of
Pitch
Order No.
Price
30
51
4 thru 40
4 thru 84
NE60-SP30
NE60-SP51
$ Price
Price
Inch – 16 Leaves
Metric – 12 Leaves
29° Acme
Screw Thread Gage
Two types for Am. Nat.–U.S.A. 60° Std. or Whitworth — English 55° Std. has scale graduated in 14ths,
20ths, 24ths and 32nds for finding number of threads per inch. No. C391 has table of double depths of threads for determining size of tap drills. All gaging surfaces ground.
Satin chrome finish
American National or
U.S. Standard, 60°
Whitworth or English
Standard, 55°
Metric Standard 60°
Acme Screw
Thread Gage
V, Unified,
American National — 60# Threads
No. of
Leaves
Range of
Threads
27
2¹⁄₄ to 28
Threads per inch
4 to 42
Threads per inch
4 to 80
Threads per inch
4 to 84
Threads per inch
30
28
51
Order No.
Price
MV70-50588
$Price
MV70-50035
Price
MV70-52486
Price
MV70-52484
Price
Tap and Drill Gage
Tap Drill
Range
Body Drill
50 to 3
44 to 1/4
Order No.
Price
MV70-50675
$Price
Standard for grinding and setting tools when cutting Acme threads. Range from 1 to 10 threads
per inch. Angles and edges of gage are hardened,
ground and carefully tested.
Range
Pitch
Order No.
Price
1 to 10
MV70-51319
$Price
Used for grinding and setting tools when cutting
Acme threads whose sides have an inclination of
14¹⁄₂″ (29° included angle). Angles and edges are
precision ground. Black-oxidized finish provides
protection against corrosion.
Shows correct size tap drill for any National Coarse or Fine
tap from #2-56NC to ¹⁄₄-28NF to produce 75% full thread.
Gage also shows correct body size drill and provides 60
holes marked with number, size and decimal equivalent of
drills from No. 1 through No. 60. Hardened, ground, polished
and tested for accuracy. ⁵⁄₆₄″ thick by 2⁵⁄₁₆″ wide by 6¹⁄₄″ long.
P-875
Machine Set-Up Gages
G - 72
Magnetic Edge Finders
CNC Machine Set-Up Gage
• Conveniently attaches itself to workpiece with built-in permanent magnet
• Precision ground, allows workpieces
to be indicated within accuracy of
±.0001″
• If hole or slot is indicated to centerline of
spindle, the edge of the workpiece will
automatically be on center line
• Avoids calculation errors by eliminating
additions or subtractions
• Two models to choose from — slotted model to pick up single edges and
double edge model with centering hole
to pick up tangent of 2 edges
Designed especially for the CNC
slant bed machine – offering a
solution to a common tool setting
problem previously not addressed
by any other tool. This versatility also lets it work on inverted
tools on conventional machines.
Plus this gage will function as the
Machine Setup Gage does.
Order No. NB75-Z8995
$Price
Order No.
Price
NB75-Z2500
NA40-983379
$Price
Price
5 Piece Wiggler Sets
Optical Centering Scope
with Cross Hairs
• For accurately locating working points on drill
presses, lathes, milling and other machines
• Set consists of snap in holder, needle point
attachment, ball contact attachment, disc contact
attachment and offset indicator holder
• Supplied in plastic pouch
• A rugged shop tool
containing a 45 power
optical system, coupled with
a compensating
adjustment feature
• Enables unskilled
operators to locate work
for drilling, boring, etc.,
on vertical mills, jig borers,
or drill presses
• True position accuracy of
±.001″ can be obtained in
approximately one minute
• Overall length 3 inches
• Shank diameter ³⁄₈″
Order No. NE50-S3894 • $Price
Order No. NE60-WCFS • $Price
Wiggler or Center Finder
Furnished with offset indicator
holder and new chuck design to hold
all attachments. Four attachments
adapt the tool to countless
applications and are snapped in
chuck without removing collet nut.
Description
$Price
Wigglers
Four interchangeable attachments accurately indicate toolspindle positions relative to ground surfaces, gage blocks,
buttons, holes, slots or crossed layout lines for making
precise setups. Chrome plated.
MV45-44597
Using offset indicator holder D with
Starrett Last Word Test Indicators,
the mechanic can sweep holes
or O.D.’s for checking run-out or
concentricity; establish center
distances; check straightness or
alignment of flat surfaces. With point
A, working centers can be accurately
located.
Center Finder, and 4 attachments,
Complete with case A, B, C, D
Center Finder, without Indicator
holder without case
Shank with Point Length; Closed – 2³⁄₈″,
Open – 4¹⁄₈″, Shank diameter – ³⁄₈″
Ball contact only (.250″ ball)
Disc contact only (.100″ disc.)
Offset Indicator Holder Only
Order No. NA45-CS1
Description
Magnetic Single Edge Finder
Magnetic Double Edge Finder
Order No.
Price
MV70-53064
$Price
MV70-53065
Price
MV70-53066
Price
MV70-53067
MV70-53068
MV70-53069
Price
Price
Price
Description
Order No.
Ball Contact Attachment (.250″ diameter)
Disc Contact Attachment (.100″ diameter)
Off-Set Indicator Holder
Needle Point Attachment
Shank
MV45-44598
MV45-44599
MV45-44600
MV45-44601
MV45-44602
Price
$ Price
Price
Price
Price
Price
Center Finder
• Accurately and quickly locates center on
round workpieces
• Place tool in drill chuck or collet and line-up
pointer with line scribed on shaft.
P-877
Machine Set-Up Tools
Electronic Edge Finder/Probes
Electronic Edge Finder
3/4″ Shank
1/2″ Shank
•E
xtremely accurate,
all precision ground
• Steel ball for easy coordinate calculating
• As probe, can be used to measure inside, outside, height and depth
• Quick, precise
• .200 × ⁵⁄₈ stylus
• 3¹⁄₄″ long
G - 73
•L
ights instantly
when touched to
work surface
Order No. GA52-MM1 • $Price
10mm Ball Diameter, 3/4 Shank
.400″ Ball Diameter, 3/4 Shank
Accuracy 0.0003mm TIR, 3⁷⁄₈″ OAL Accuracy 0.00002 TIR, 3-7/8″ OAL
Order No. NA45-EF1
Replacement Bulb
Order No. GA52-MM1Bulb
Replacement Battery
Order No. KA56-L92BP2 (2 Pack)
Order No. NB51-50000
$Price
$Price
Electronic Pre-Set Gage
3-Dimensional Electronic Sensor (x,y,z)
•D
esigned of one-piece construction which gives
strength and accuracy
• Made of high-quality tool steel hardened to 60 Rc
• Precision ground on all surfaces
• Four highly visible LED lights
• Easily replaced LED lamp and battery
• Repeatability T.I.R. within
.0002″ – 0.006mm
• Operates in horizontal or vertical position
• Travel zone for all 3 axis .200
• Shank size .750
• Probe diameter .200
• Repeatability ±.0005
Order No. NB51-50003
Fowler/Mirage Tool Set
Quick Detection of Position
$Price
Electronic Edge Finders
patent pending
The Fowler/Mirage Tool Set is an easy and affordable way to set
Z depths quickly and accurately! Slowly lower cutting tool toward
Tool Set…indicator will light upon contact!
• Six equally spaced
light ports provide
visibility at any angle
• Made in the USA
• Read off any electrically
conductive metal
• Edge finder lights instantly
when stylus touches
work edge
• Repeatability: .0002″
• Furnished complete with
LED, 12 volt battery
and protective case
NA55-54575600
NA55-54575625
NA55-54575650
•
•
•
•
•
Can be operated directly off table or from machine vise.
Aluminum contact face eliminates carbide shipping on cutting tools.
Repeatability: .0002″
Block dimensions: 1″ x 2″ x 3″
Batteries included.
Along with light indication, model NA55-54575650 emits an audible “beep”
at moment of contact.
Stylus
Shank
Audible
Order No.
Price
.200″
Z\x″
No
NA55-54575600
$Price
.200″
Z\x″
No
NA55-54575625
Price
.400″
C\v″
Yes
NA55-54575650
Price
Zero-Setters
Fast and sure establishment of “0” reference point with built-in indicator. Spring loaded
setting face to safe guard against damage from over run. Body dia. 1.44″ (36.5mm).
Wooden case included.
Height
Graduation
Order No.
1″
0.0005″
MT80-950-111
$Price
Price
25mm
0.01mm
MT80-950-112
Price
P-879
Reference Books
Machinery’s Handbook and
Machinery’s Handbook Guide
28th Edition
April 2004, 2,690 pp., illus.
Toolbox Size Edition
5″ × 7″
Order No. MY50-28005 • $Price
Larger Print Edition
7″ × 10″
28th Edition Machinery’s Handbook Guide
28th Edition Machinery’s Handbook on CD
• Complete text search
• Interlinks to related topics and examples
• Includes many standards referenced
in the 26th edition handbook
• Extensive cross-referencing between CD
and print edition makes them perfect complements!
28th Edition CD-ROM
28th Edition CD-ROM / Toolbox Handbook Combo
Sixth Edition
By Clifford W. Kennedy,
Edward G. Hoffman, & Steven D. Bond
1987, 654pp., illus.
Concise yet comprehensive, training manual
and reference provides the many phases
of inspection work and their application.
Features:
• Discusses a range of manual and automatic
measuring devices along with their specific
functions and the specialized functions
involved with their use
• Analyzes the methods and duties of inspectors
Jig and Fixture Design Manual
By Eric K. Henriksen
1973, 312pp., illus.
Features:
• Describes fixture components in full
• Presents the fundamental principles
for efficiently combining the components
into successful fixtures
• Applies basic engineering principles to the
mechanical and economical analysis
of the complete design
• Includes metric conversion tables and appendices
on transfer of tolerances, measuring of angles
in radians, and the dimensioning of fixture
by stress analysis
Machine Shop Practice
Second Edition
Volume I: Karl H. Moltrecht
1981, 496pp., illus.
Machinery’s Handbook Pocket Companion
Order No. MY50-11267
$Price
By Dick Pohanish (Editor)
Machinery’s Handbook Pocket Companion
puts all the basic information you need right at
your fingertips. Extremely concise yet authoritative,
this valuable tool draws on Machinery’s Handbook’s
wealth of tables, charts and text to provide quick and
easyaccess to the most basic data.
27th Edition
Order No. MY50-3089X* • $Price
28th Edition
Volume II: Karl H. Moltrecht
1981, 517pp., illus.
$Price
Features:
•N
ow offers sections on numerical control,
grinding wheels, single point cutting tools and tool wear,
basic drilling machine setups, and formulas
•G
ives greater attention to methods of setting up the workpiece
on milling machines, horizontal boring machines, planners and shapers
• Includes more than 760 illustrations and 70 tables
Cutting Tool Applications
By George Schneider, Jr.
Practical, easy-to-use reference
on machining processes that
demonstrates general purpose, high
production and special purpose applications.
Covers metal removal, single point
machining, hole making processes,
multipoint machining and
abrasive processes
P-880
G - 74
Handbook of Dimensional
Measurement
By Francis T. Farago and Mark Curtis
A readable, comprehensive guide to all the
know-how for advanced dimensional measurement
technology from a former Senior Research
Engineer at General Motors. A wealth of practical
data and basic and advanced methods.
Contains useful, practical, and hard-to-find information, and provides a wealth
of engineering and shop standards, illustrations, formulas, and readable tables
and graphs.
Features:
• Provides extensive coverage of mathematics, cutting tools, speeds and feeds,
screw thread systems, and other critical topics
• Metric and inch dimensions of: bolts, nuts, and screws; rivets; pins and dowels;
tapers; steels and non-ferrous metals; and more
• Cross-references important subjects for greater convenience
Inspection and Gaging
Reference Books
G - 75
Ingenious Mechanisms for
Designers and Inventors
Volume I: Franklin D. Jones
536 pp., illus.
Die Design Fundamentals
By J.R. Paquin & R.E. Crowley
Volume II: Franklin D. Jones
538 pp., illus.
Gives graphically detailed assistance in
understanding the principles of die design.
Volume III: Holbrook L. Horton
536 pp., illus.
Volume IV: John A. Newell & Holbrook L. Horton
493 pp., illus.
Order No. MY50-10325 • $37.50
The Machinist’s
Bedside Reader
1st
2nd
3rd
Pages
208
200
260
Order No.
By United States Cutting Tool Institute
Order No. MY50-11771* • $Price
Covers advances in technology,
tooling, materials and designs.
By Guy Lautard
Tips-Hints-Anecdotes
of the Machine Tool Trade
Detailed drawings for useful machinist’s
tools plus tips for doing things faster, easier
and better in your shop. Dozens of shop
anecdotes round out these useful, enjoyable and easy-reading books.
Edition
Metal Cutting Tool Handbook
Complete Set of Four: Order No. MY50-10848 • $Price
Gives inventors and designers concise, illustrated descriptions
of many of the most ingenious mechanical movements ever
designed. Fully describes and illustrates with working diagrams
cam applications, special cam designs, interlocking devices, valve
diagrams, tripping or stop mechanisms, feeding and ejecting
mechanisms for power presses, and more.
Price
MY50-MBR $Price
MY50-MSBR Price
MY50-MBR3 Price
Technical Shop Mathematics
By John G. Anderson
3 Book Set
Vols. 1, 2 & 3
MY50-3MBR
Suitable for home study, classroom use, or as
a superior reference guide for the shop professional,
this practical text presents a review
and introduction to basic shop mathematics
in a straight-forward manner.
$Price
Basic Machining
Reference Handbook
By Arthur R. Meyers & Thomas J. Slattery
Pipefitters Handbook
By Forrest R. Lindsay, 464 pp., illus.
A complete and easy-to-use hands-on
source for experienced machinists, programmers, tool designers, cost estimators, and
others not directly involved with performing
specific machining steps.
Pocket Reference Book
This handy reference contains thousands of facts
and figures relevant to pipefitters, steamfitters
— anyone concerned with layout and installation
of pipe.
Pocket PC Reference Book
By Thomas J. Glover
New 4″ × 6″ Size and 1000+ pages
Excellent reference for engineers,
managers, foremen, purchasing agents,
maintenance persons and craftsmen.
Contains tables, maps, formulas,
constants and conversions.
Hard-to-find information for IBM PC’s
and compatibles and extensive PC industry
phone book. The new 4″ × 6″ size packs
10 additional sections and thousands of updates.
P-881
Reference Books
CNC Simplified
Engineering Formulas for Metalcutting
This textbook covers everything
from programming basics to
bench-top teaching machines to
industrial machines to milling and
turning programming to an introduction
to CAD/CAM. What’s more, a CAD/CAM
SOFTWARE PROGRAM, included in
each book, makes it possible to design
a part on the computer, generate
machining codes, and simulate the tool
path (cutting action) to check for
programming errors.
A unique and invaluable resource,
Engineering Formulas for Metalcutting
will enable users to calculate necessary
speeds, feeds and required machining
power in order to maximize the
productivity of cutting. Providing
information on formulas and their
applications, describes mechanical
properties of the most popular work
materials, such as steels, cast irons and
nonferrous alloys.
Includes CD-ROM
Order No. MY50-31330*
$Price
$Price
Pipe Welding Procedures
This text is designed for beginning
machine trades students; industrial
machine tool training: and
practitioners. Divided into three
sections, it starts with basic
metal-removal operations of
conventional machines, progresses
to CNC machines, and finishes with
CAD/CAM. Offers practical examples
on basic operations, CNC programming
and CAD/CAM designing.
A standard reference for decades,
this new edition of Pipe Welding
Procedures continues to reinforce the welder’s understanding
of procedures. Describes in detail
the manipulating procedures used
to weld pipe joints. Readers will
find useful information on heat
input and distribution, essentials
of shielded metal-arc technology,
distortion, pipe welding defects,
welding safety.
$Price
Glossary of Metalworking Terms
As the only modern glossary of
terms related to the fabrication
and use of metals and metallurgy,
Glossary of Metalworking Terms
covers more than 4,000 essential
general and functional terms used
in all areas related to metalworking
and manufacturing technology.
Many entries are cross-referenced
to make related topics instantly
accessible.
Second Edition
$Price
The Tool Steel Guide
The Tool Steel Guide is packed with
specifications, heat treatments and
applications of all types of die and mold
steels, as well as ideas and suggestions
on how to prepare steels for machining
and heat treatment. This handy and
convenient guide will go a long way in
helping dispel the air of mystery that for
many years has surrounded the selection,
heat treatment and use of tool steels.
$Price
$Price
Engineering Mathematics
through Applications
Advanced Engineering Mathematics
A comprehensive reference and
self-study guide for professionals
and students. The mathematics is
developed through detailed
step-by-step examples rather than
formal proofs. Includes hundreds
of examples and exercise and a
refresher chapter covering indices,
fractions, decimals, percentages
and ratios. The answers to all the
questions are included within.
This best-selling reference is
almost like having your own
personal tutor. You proceed at
your own rate and any
difficulties you may encounter are
resolved before you move on to the
next topic. A step-by-step
programmed approach that is
complemented by hundreds of
worked examples and exercises.
P-882
Fourth Edition
$Price
$Price
Machine Tool Technology Basics
Includes CD-ROM
G - 76

Micrometers Calipers Indicators Scales Dial

Transcription

Similar documents

Simple gaging is now defined… CCU-TOUCH™

DeMarker Strategy

BatFink indicator

FLEMING PLACE TEMPLATE 6-2012

PosiPen - FindTheNeedle.co.uk

Hold the indicating block against the groomer or verticutter blades to

How to adjust DeVlieg@ Micro-AdjustrM Standard Boring Bars

DeMarker - ActFX Algorithmic Trading

USC Super Dry Dial Single Jet Hot Water Meter

Plug Gages - Vermont Gage