USC Super Dry Dial Single Jet Hot Water Meter
Transcription
USC Super Dry Dial Single Jet Hot Water Meter
USC Super Dry Dial Single Jet Hot Water Meter - 3/4" MBSP F A E ØD Dimensions (mm): A: G3/4B B: 130 C: 228 D: 72 E: 74 F: 19 B C Design The Altecnic USC super dry range of water meters for hot water applications offers a dependable and accurate reading of water consumption and is ideally suited for use in domestic premises and small commercial buildings. USC super dry dial water meters are suitable for use with turbid water and in hard water areas, containing higher levels of calcium carbonate. The white dials with black numerals and red indicators makes reading easier, even when light conditions are poor. Technical Specification Single jet turbine water meter Super dry dial 360˚ rotating dial for easy reading in any position Temperature class: T70 - T90 Measuring range: R80 Dial range: 0 to 100,000m3 Maybe installed in any position U0-D0- Straight pipe not required upstream or downstream of meter MID approved according to European Directive 2004/22/CE (moduleB+D) In compliance with: BS EN 14154 OIML R49/200 Nom. continuous flow rate (m3/h): Max. flow rate for short period (m3/h): Transitional flow rate with measuring range R80 [MPE±2%] (l/h): Min. flowr ate with measuring range R80 [MPE±5%] (l/h): Accuracy at measuring range R80 (l/h): Pressure loss class (bar): Max. working pressure (bar): 4 5 80 50 15 0.63 16 Advanced Water Company, Unit D5 The Enterprise Centre, Off Enterprise Way, Vale Park, Evesham Worcestershire, WR11 1GS TEL: 01386 760066 FAX: 01386 760077 EMAIL: [email protected]