doctraub - Turlo Srl
download 
Report Transcription
traub - Turlo Srl
ATTACHMENTS AND SPARES FOR SINGLE AND MULTISPINDLE AUTOMATIC SCREW MACHINES POLYGON-GENERATING AND THREAD-MILLING ATTACHMENT for Mehrkantdreh Und Gewindefraseinrichtung Fur INDEX TRAUB MAS AUTOMATIC SINGLESPINDLE MACHINES Automatische Einspindeldrehmaschinen TURLO S.r.l. Via Tagliaferro 3 - 13019 VARALLO SESIA (VC), ITALY Tel (0039) 0163 54446 Fax (0039) 0163 54226 Email: [email protected] www.turlo.it POLYGON-GENERATING AND THREAD-MILLING ATTACHMENT for Mehrkantdreh Und Gewindefraseinrichtung Fur INDEX 24 - 36 - 52 INDEX A12 - A18 - A25 INDEX B30 - B42 - B60 INDEX C19 - C29 INDEX DG12 INDEX ER25 INDEX E/ER30 - E/ER42 TRAUB A15 - A25 — A42 - A60 TRAUB TB42 - TB60 TRAUB TK42 - TK60 TRAUB TD26 MAS A26 CNC INDEX C19 - C29 INDEX B30 - B42 - B60 Polygon Generating / Thread Milling Attachment This attachment is made up as follows: - Driving Pulley - 2 Belts - 2 Driven Pulleys - Electromagnetic clutch with its support - Telescopic Spline Shaft - Toolbox with 5 helical gears inside - Safety guard - Electric Box - Microswitch + Cam. We started to manufacture this attachment in 1980. There are currently more than 600 of them operating in Italy, where it is surely more popular than the original one. It is preferred because of its great power and sturdiness, that allows the heaviest jobs. The structure of the attachment is very simple and it can be easily fitted by anyone who follows the instruction manual. The power is taken from the back of the bar spindle of the machine and it is transmitted by an electromagnetic clutch only when the attachment is in the working phase of the cycle. The thread-milling and the polygon-generating operations are based on a different turning ratio (1:1 , 2:1). The ratio can be changed very easily by changing the belt and the pulley, that is fitted on the clutch. We suggest that this attachment should machine only metals like brass, bronze, copper and aluminium. All the items necessary for the installation are provided. INDEX ER25 Polygon Generating / Thread Milling Attachment This attachment is made up as follows: - Driving Pulley - 2 Belts - 2 Driven Pulleys - Electromagnetic clutch with its support - Telescopic Spline Shaft - Toolbox with 5 helical gears inside - Safety guard - Electric Box - Microswitch + Cam. Our attachment is preferred to the original one because of its great power and sturdiness, that allows the heaviest jobs. The structure of the attachment is very simple and it can be easily fitted by anyone who follows the instruction manual. The power is taken from the back of the bar spindle of the machine and it is transmitted by an electromagnetic clutch only when the attachment is in the working phase of the cycle. The thread-milling and the polygon-generating operations are based on a different turning ratio (1:1 , 2:1). The ratio can be changed very easily by changing the belt and the pulley, that is fitted on the clutch. We suggest that this attachment should machine only metals like brass, bronze, copper and aluminium. All the items necessary for the installation are provided. INDEX E/ER30 - ER42 Polygon Generating / Thread Milling Attachment This attachment is made up as follows: - Driving Pulley - Belt - Driven Pulley - Electromagnetic Clutch with its support - Telescopic Spline Shaft - Toolbox with 6 helical gears inside - Safe Carter - Electric Box - Microswitch + Cam - Hydraulic Cross Slide - Original Toolholder adapted. The original weak slide is replaced with our hydraulic one, that is able to carry our tool-holder gear-box. Our slide can also be used for ordinary turning operations, in fact we supply a toolholder for original Index tools, together with the attachment. The thread-milling operation and the polygon-generating one are based on a different turning ratio (1:1 , 2:1). The ratio can be changed very easily by inserting the telescopic shaft into one of the two drives at the rear of the gear-box. The power is taken from the back of the main spindle of the machine and it is transmitted by an electromagnetic clutch only when the attachment is in operation. All the items necessary for the installation are provided. The installation is very easy since it does not require any major changes in the machine. The attachment can also generate three flat sides on the component. INDEX DG12 Polygon Generating / Thread Milling Attachment This attachment is made up as follows: - Driving Pulley - 2 Belts - 2 Driven Pulleys - Electromagnetic clutch with its support - Telescopic Spline Shaft - Toolbox with 3 helical gears inside - Safety guard - Electric Box - Microswitch + Cam. It is preferred because of its great power and sturdiness, that allows the heaviest jobs. The structure of the attachment is very simple and it can be easily fitted by anyone who follows the instruction manual. The power is taken from the back of the bar spindle of the machine and it is trasmitted by an electromagnetic clutch only when the attachment is in the working phase of the cycle. The thread-milling and the polygon-generating operations are based on a different turning ratio (1:1 , 2:1). The ratio can be changed very easily by changing the belt and the pulley, that is fitted on the clutch. TRAUB A15 - A25 Polygon Generating / Thread Milling Attachment This attachment is made up as follows: - Driving Pulley - 2 Belts - 2 Driven Pulleys - Pulley support - Telescopic Spline Shaft - Toolbox with 3 helical gears inside We take the motion from the back of the bar-spindle with a driving pulley, so we are able to fit a stronger telescopic spline shaft that makes easy the most difficult jobs on this machine. Moreover we use the same toolbox to do both the operations (polygon generating ad thread milling): you just need to change the driven pulley on the back with the other one that is supplied with the attachment. TRAUB TB42 - TB60 TRAUB TK42 - TK60 Polygon Generating / Thread Milling Attachment This attachment is made up as follows: - Driving Pulley - 2 Belts - 2 Driven Pulleys - Pulley support - Telescopic Spline Shaft - Toolbox with 5 helical gears inside We take the motion from the back of the bar-spindle with a driving pulley, so we are able to fit a stronger telescopic spline shaft that makes easy the most difficult jobs on this machine. Moreover we use the same toolbox to do both the operations (polygon generating ad thread milling): you just need to change the driven pulley on the back with the other one that is supplied with the attachment. MAS A26 CNC Polygon Generating / Thread Milling Attachment This attachment is made up as follows: - Driving Pulley - Belt - Driven Pulley - Electromagnetic Clutch with its support - Telescopic Spline Shaft - Toolbox with 6 helical gears inside - Electric Box - Microswitch The thread-milling operation and the polygon-generating one are based on a different turning ratio (1:1 , 2:1). The ratio can be changed very easily by inserting the telescopic shaft into one of the two drives at the rear of the gear-box. The power is taken from the back of the main spindle of the machine and it is transmitted by an electromagnetic clutch only when the attachment is in operation. All the items necessary for the installation are provided. The installation is very easy since it does not require any major changes in the machine.
