Scyon™ and James Hardie® Products

Transcription

Scyon™ and James Hardie® Products
Section 16
Scyon™ and James Hardie® Products
Scyon ™ Axon™and Scyon™ Matrix™ cladding
Scyon™ Linea™ weatherboard
Scyon™ Stria cladding
Scyon ™ Accent™ trim
Scyon™ Secura™ interior flooring
Scyon™ Secura™ exterior flooring
Primeline® and Hardiplank® weatherboard
Hardiflex® sheet products and Panelclad® sheet
Harditex® sheet products
Exotec® facade panel and fixing system
Comtex® facade panel
Villaboard®, Versilux®, Pineridge® and Hardigroove® lining
Hardipanel® compressed sheet
Underlay Sheets
Hardibrace® sheet bracing
Exotec® facade panel
Artista® products
HardieDeck®
General Accessories
ALL PRICES INCLUDE GST. Ask in store about our Price Guarantee.
215
216
“Celebrating 141 YEARS.”
Section 16 SCYON™ and JAMES HARDIE® PRODUCTS
Scyon™ Stria™
cladding
Scyon™ Matrix™
cladding
ALL PRICES INCLUDE GST. Ask in store about our Price Guarantee.
217
Scyon™ Axon™ cladding
133mm wide smooth
218
“Celebrating 141 YEARS.”
Section 16 SCYON™ and JAMES HARDIE® PRODUCTS
Scyon™ Axon™ cladding
Axon™ installation
What is it?
A vertically grooved cladding panel that looks sharp and
uniform. Pre-primed and easy to install, Scyon™ Axon™
cladding is a pristine look that lasts.
HardieWrapTM
weather barrier
50mm EPDM foam
back sealing tape
Where do you use it?
In residential applications wherever a modern design
is required, including external walls in composite
construction, upper-storey and ground-level extensions,
and internal feature walls.
What are the key benefits?
SPEED. The stepped shiplap on the long edges of
Axon™ cladding means sheets are easily installed. Paint
application is fast because the pre-primed sheets mean
less paint and time is needed to achieve a high-quality
finish. Finally, sheets are sized to fit common wall frame
sizes, which means less waste and cutting.
DESIGN OPTIONS. Whether you choose the smooth or
grained surface texture, the vertical grooves – sharp and
consistent, are a design alternative to typical horizontal
features. The option of brad nailing minimises visual
interruption. Axon™ cladding can also be used to add
texture as an eave or soffit lining. Made from Scyon,™
it will resist shrinking, swelling and cracking* to hold paint
longer than wood and can therefore be painted dark as
well as light colours.
ENHANCES ENERGY EFFICIENCY. When Axon™
cladding is used with the right insulation and in
accordance with the standard installation instructions,
an R-Value of up to 2.8 can be achieved for the wall.
Greater Total R-Values can be achieved through the
use of cavity wall construction and reflective vapour
permeable membranes. Refer to the James Hardie’s
Wall System Thermal Performance Total R-Values
Technical Supplement for more information.
MADE FROM SCYON.™ Axon™ cladding is made from
Scyon,™ the advanced lightweight cement composite
with heavy-duty performance. Not only is it resistant to
damage from termites, rot and fire*, but it can also be
gun nailed and is easy to cut – like timber.
MADE IN NEW ZEALAND.
Grained Texture
133mm wide
groove spacing
Smooth Texture
133mm wide
groove spacing
What are the sizes?
Product
code
Surface
Texture
Groove Spacing
(mm)
Length
(mm)
Width
(mm)
Thickness
(mm)
Mass
(kg/m2)
403931
Smooth
133
2,450
1,200
9
12.5
404417
Smooth
400
2,450
1,200
9
12.5
403932
Smooth
133
2,750
1,200
9
12.5
404418
Smooth
400
2,750
1,200
9
12.5
403933
Smooth
133
3,000
1,200
9
12.5
404419
Smooth
400
3,000
1,200
9
12.5
404510
Grained
133
2,450
1,200
9
12.5
404511
Grained
133
2,750
1,200
9
12.5
404512
Grained
133
3,000
1,200
9
12.5
Code
Page
HardieBlade Saw Blade 185mm
300660
51
HardieBlade™ Saw Blade 254mm
303375
51
HardieDrive™ Screws 32mm long
305532
51
HardieDrive™ Screws 40mm long
305533
51
James Hardie™ 9mm Aluminium External Corner
305521
52
James Hardie™ 9mm Aluminium Horizontal h Flashing
3,000mm long
305613
52
James Hardie™ 9mm Aluminium Horizontal h Jointer
305614
52
James Hardie™ 9mm Aluminium Internal Corner
305520
53
James Hardie™ Aluminium Snap On Corner
(2 pieces per set)
305513
53
Selling units per pack: 30 sheets
What are the accessories?
Accessory
™
James Hardie™ 50mm wide Foam Back Sealing Tape
304560
54
James Hardie™ Joint Sealant^ 300ml cartridge
305534
54
James Hardie™ Joint Sealant^ 600ml sausage
305672
54
Smooth Texture
400mm wide
groove spacing
* When installed and maintained correctly and to the extent set out in James Hardie’s
published literature current at the time of installation.
^ Not to be used in fire applications.
ALL PRICES INCLUDE GST. Ask in store about our Price Guarantee.
219
Scyon™ Linea™
Weatherboard 150mm
220
“Celebrating 141 YEARS.”
Section 16 SCYON™ and JAMES HARDIE® PRODUCTS
Scyon™ Linea™
weatherboard
Linea™ weatherboard installation
What is it?
A 16mm thick horizontal weatherboard with deep
shadow lines. Scyon™ Linea™ weatherboard is the
weatherboard that weathers well.
HardieWrap™
weather barrier
Framing
Pre-marked
position
of bottom
of first board
Where do you use it?
In residential applications wherever a contemporary
design is required, including external walls in composite
construction, upper-storey and ground-level extensions,
and internal feature walls.
What are the key benefits?
DESIGN OPTIONS. The 16mm thick profile creates
consistent deep shadows. The range of corner finishing
details – aluminium or Scyon™ Axent™ trim – means
that a range of different looks can be achieved. The
Linea™ window adaptor can be used for subtle window
treatments or the Axent™ trim can provide a contrast.
Face or concealed fixing rounds out the options.
EASY TO INSTALL. Linea™ weatherboards are back
bevelled to sit flush with the stud. Paint application is
fast because the pre-primed sheets mean less paint
and time is needed to achieve a high-quality finish.
Linea™ PVC
starter strip.
What are the accessories?
Accessory
LOW MAINTENANCE. Linea™ weatherboard will maintain
its integrity and general appearance significantly longer
than timber. Some timber is susceptible to cracking in
exterior applications, which in turn can lead to shrinking
or warping. Linea™ will resist shrinking, swelling and
cracking1 to hold paint longer than wood, and can also
be painted dark as well as light colours.
ENHANCES ENERGY EFFICIENCY. When Linea
weatherboard is used with the right insulation and in
accordance with the standard installation instructions,
an R-Value of up to 2.8 can be achieved for the wall.
Greater Total R-Values can be achieved through the
use of cavity wall construction and reflective vapour
permeable membranes. Refer to the James Hardie’s
Wall System Thermal Performance Total R-Values
Technical Supplement for more information.
™
Code
Page
HardieBlade Saw Blade 185mm
300660
51
HardieBlade™ Saw Blade 254mm
303375
51
HardieDrive™ Screws 32mm long
305532
51
HardieDrive™ Screws 40mm long
305533
51
James Hardie™ 16mm Aluminium Internal Corner Mould
305511
53
James Hardie™ Joint Sealant^ 300ml cartridge
305534
54
James Hardie™ Joint Sealant^ 600ml sausage
305672
54
Linea™ Aluminium Corner Soaker
for 150mm wide boards
305574
55
Linea™ Aluminium Corner Soaker
for 180mm wide boards
305572
55
Linea™ Aluminium External Slimline Boxed Corner
305512
55
Linea™ Aluminium Universal Window Adaptor
305510
55
Linea™ PVC Box Corner Z Flashing
305570
56
Linea™ PVC Starter Strip
305571
56
™
MADE FROM SCYON.™ Linea™ weatherboard
is made from Scyon,™ the advanced lightweight cement
composite with heavy-duty performance. Not only is it
resistant to damage from termites, rot and fire*, but it
can also be gun nailed and is easy to cut – like timber.
What are the sizes?
Product
Product
code
Length
(mm)
Width
(mm)
Thickness
(mm)
End details
Coverage information
Effective
cover (mm)
No. of planks/
metre height
Mass
(kg/m2)
150mm Linea™ weatherboard
403930
4,200
150
16
Tongue & Groove
120
8.3
21.1
180mm Linea™ weatherboard
403912
4,200
180
16
Tongue & Groove
150
6.7
21.1
* When installed and maintained correctly and to the extent set out in James Hardie’s published literature current at the time of installation.
^ Not to be used in fire applications.
ALL PRICES INCLUDE GST. Ask in store about our Price Guarantee.
7
221
Scyon™ Matrix™
Cladding
222
“Celebrating 141 YEARS.”
Section 16 SCYON™ and JAMES HARDIE® PRODUCTS
Scyon™ Matrix™ cladding
What is it?
Matrix™ cladding installation
An exterior cladding system with a geometric,
expressed-joint look.
Scyon™ cavity trim
Where do you use it?
HardieWrap™
weather barrier
In residential and medium-density applications wherever
a modern design is required, including external walls in
composite construction, upper-storey and ground-level
extensions and internal feature walls.
James Hardie™
backing strip
100
mm
What are the key benefits?
SIMPLE TO INSTALL. Instead of needing the steel top
hats associated with many commercial systems, Scyon™
Matrix™ cladding sheets are installed with Scyon™ cavity
trim battens. The expressed joint is created easily using
a 10mm packer. Sheets are sanded smooth and preprimed for fast paint application and a high-quality finish.
DESIGN OPTIONS. Square and rectangular panels
with an expressed joint mean a variety of looks can be
created, from horizontal and vertical stripes to geometric
patterns. Sanded sheets give a flat, smooth finish and
digital printing can add even more design options. Matrix™
cladding’s resistance to cracking, warping and swelling*
means it can be painted both dark and light colours.
The option of brad nailing minimises visual interruption.
Matrix™ cladding may be specified for timber-framed or
steel-framed structures.
DURABILITY. The Matrix™ cladding panels are sealed
on all sides for durability and stability.
ENHANCES ENERGY EFFICIENCY. When Matrix™
cladding is used with the right insulation and in
accordance with the standard installation instructions,
an R-Value of up to 3.3 can be achieved for the wall.
Greater Total R-Values can be achieved through the
use of cavity wall construction and reflective vapour
permeable membranes. Refer to the James Hardie’s
Wall System Thermal Performance Total R-Values
Technical Supplement for more information.
MADE FROM SCYON.™ Matrix™ cladding is made from
Scyon,™ the advanced lightweight cement composite with
heavy-duty performance. Not only is it resistant to damage
from termites, rot and fire*, but it can also be gun nailed
and is easy to cut – like timber.
Matrix™ panel
100
mm
Continuous 6mm
bead of James Hardie™
joint sealant
James Hardie™ joint sealant
or double sided backing tape
What are the sizes?
Product code
Length (mm)
Width (mm)
Thickness (mm)
Mass (kg/m2)
403811
1,190
1,190
8
12.6
403810
2,390
590
8
12.6
403812
1,790
890
8
12.6
404169
2,990
1,190
8
12.6
2,450
70
19
3.4
Scyon cavity trim
™
403840
What are the accessories?
Accessory
Code
Page
HardieBlade™ Saw Blade 185mm
300660
51
HardieBlade™ Saw Blade 254mm
303375
51
HardieDrive™ Screws 40mm long
305533
51
James Hardie™ 9mm Aluminium External Corner
305521
52
James Hardie™ Backing Strip 1,190mm
305557
53
James Hardie™ Backing Strip 2,390mm
305558
53
James Hardie™ Backing Strip 2,990mm
305559
53
James Hardie™ Base Coat 15kg Bag
304491
53
James Hardie™ Facade Washers
305565
53
James Hardie™ Joint Sealant^ 300ml cartridge
305534
54
James Hardie™ Joint Sealant^ 600ml sausage
305672
54
James Hardie™ 18mm PVC Cavity Vent Strip
305555
54
* When installed and maintained correctly and to the extent set out in James Hardie’s published literature current at the time of installation.
^ Not to be used in fire applications.
ALL PRICES INCLUDE GST. Ask in store about our Price Guarantee.
223
Scyon™ Stria™ cladding
What is it?
A range of cladding that features a horizontal ship-lapped
joint. Pre-primed and easy to install, Stria™ cladding
is the fast way to achieve a timeless and classic look
that endures.
Where do you use it?
LOW MAINTENANCE. Stria™ cladding will maintain
its integrity and general appearance significantly longer
than timber. Some timber is susceptible to cracking in
exterior applications, which in turn can lead to shrinking
or warping. Stria™ cladding will resist shrinking, swelling
and cracking* to hold paint longer than wood and can
also be painted dark as well as light colours.
ENHANCES ENERGY EFFICIENCY. When Stria™
cladding is used with the right insulation and in
accordance with the standard installation instructions,
an R-Value of up to 2.8 can be achieved for the wall.
Greater Total R-Values can be achieved through the
use of cavity wall construction and reflective vapour
permeable membranes. Refer to the James Hardie’s
Wall System Thermal Performance Total R-Values
Technical Supplement for more information.
In residential applications wherever a timeless, classic
and enduring look is required, including external walls in
composite or full wrap construction, upper-storey and
ground-level extensions and internal feature walls.
What are the key benefits?
DESIGN OPTIONS. There are three profiles to choose
from in the Stria™ cladding range, each offering a variation
of a ‘classic’ look.
STRIA™ CLADDING
• standard profile 325mm wide
14mm thick with a square horizontal edge that gives
the timeless charm and classic appeal of decorative
rendered and raked masonry.
• wide profile 405mm wide
14mm thick with a square horizontal edge that gives
the timeless charm and classic appeal of decorative
rendered block-work.
• splayed profile 255mm wide
16mm thick with a splayed horizontal edge that gives
the timeless charm and classic look of traditional timber.
MADE FROM SCYON.™ Stria™ cladding is made from
Scyon,™ the advanced lightweight cement composite
with the heavy-duty performance. Not only is it resistant
to damage from termites, rot and fire*, but it can also be
gun nailed** and is easy to cut – like timber.
MADE IN NEW ZEALAND (WIDE PROFILE).
Standard Profile
325mm wide
Wide Profile
405mm wide
Splayed Profile
255mm wide
And each of these looks can be further enhanced by your
choice of corner detailing, for example, aluminium, mitred or
Scyon™ Axent™ trim. Easy-to-cut mitred corners mean that
horizontal lines wrap the building seamlessly. Alternatively,
Scyon™ Axent™ trim can provide a contrast. Plus, a vertical
flashing stop provides a 15mm vertical groove to match the
horizontal for a more geometric treatment.
SPEED. Stria™ cladding is the fast and simple way to
create a timeless and classic look. Once the first board
is fixed level, the shiplapped joint on the next extra-wide,
4.2m long board is fixed to the top of the previous board
and can be joined on or off stud. For a classic rendered and
raked masonry look, compare this to the slower process of
laying bricks, rendering, scoring and painting (and with all
the associated mess and scheduling of different trades).
What are the sizes?
Product
Size (nominal)
Coverage information
Product code
Profile
Length
(mm)
Width
(mm)
Thickness
(mm)
Effective
cover (mm)
No. of boards/
metre height
Mass
(kg/m2)
404063
Standard
4,200
325
14
300
3.3
18.93
404413
Wide
4,200
405
14
380
2.6
18.93
404522
Splayed
4,200
255
16
230
4.3
21.60
* When installed and maintained correctly and to the extent set out in James Hardie’s published literature current at the time of installation.
** Can be gun nailed for face fixing only.
^ Not to be used in fire applications.
224
“Celebrating 141 YEARS.”
Section 16 SCYON™ and JAMES HARDIE® PRODUCTS
Stria™ cladding installation
Scyon™ Stria™
Cladding
405mm wide
What are the accessories?
Accessory
Code
Page
HardieBlade™ Saw Blade 185mm
300660
51
HardieBlade™ Saw Blade 254mm
303375
51
HardieDrive™ Screws 32mm long
305532
51
HardieDrive™ Screws 40mm long
305533
51
James Hardie™ 14mm Aluminium External Trim Corner
305519
52
James Hardie™ 16mm Aluminium External Trim Corner
305630
52
James Hardie™ 14mm Aluminium Internal Corner
305518
53
James Hardie™ 16mm Aluminium Internal Corner Mould
305511
53
James Hardie™ 75x75mm Colorbond® Corner Flashing
305564
53
James Hardie™ Joint Sealant^ 300ml cartridge
305534
54
James Hardie™ Joint Sealant^ 600ml sausage
305672
54
Stria™ Vertical Flashing Stop
305547
57
ALL PRICES INCLUDE GST. Ask in store about our Price Guarantee.
225
Scyon™ Secura™
exterior flooring
For more information about performance, installation, warranties and warnings visit scyon.com.au
226
“Celebrating 141 YEARS.”
Section 16 SCYON™ and JAMES HARDIE® PRODUCTS
Scyon™ Secura™
exterior flooring
What is it?
Scyon™ Secura™exterior fastener layout
An external structural flooring substrate for tile finishes
over timber or lightweight steel floor joists. Simple
and fast to install, Secura™ exterior flooring helps give
you extra peace of mind against moisture damage to
balconies and decks.
Tongue end
Joists at 450mm max. centres
(for 19mm thick)
and 600mm max. centres
(for 22mm thick)
200mm
max.
Where do you use it?
Groove end
25mm min, distance
from tongue and groove
As an external substrate for tiled residential balconies
and decks. It’s an alternative to particle board, plywood
or compressed fibre cement.
12mm min.
fastener edge
distance
50mm min.
corner
distance
What are the key benefits?
SECURITY. Secura™ exterior flooring is sealed on all sides
with an advanced polymer coating that helps protect
the board from moisture-related problems. A topcoat
on the surface of the board provides good adhesion.
The continuous mesh reinforcement on the underside
enhances the heavy-duty performance of Scyon™, adding
extra strength and impact resistance to deliver a suitable
external residential flooring substrate.
FAST AND EASY TO INSTALL. Scyon™ Secura™
exterior flooring can be up to 40% faster to install than
conventional compressed fibre cement sheet. This is
because it’s made from Scyon™ which is about 24% lower
in density than compressed fibre cement, making it lighter,
and easier to handle and install, without compromising
heavy-duty performance. In fact, there’s no need for
pre-drilling and screwing, because it can be gun nailed
and is easy to cut like timber. It’s also tongue and grooved,
which delivers engineered joints and eliminates the need
for timber trimmers under these joints.
NO FUSS. For balconies that aren’t over habitable rooms
– verandas for example – no additional waterproofing
membrane is needed once Secura™ exterior flooring
is installed**. For balconies over habitable rooms, a
waterproofing system needs to be applied.
MADE FROM SCYON.™ Secura™ exterior flooring is
made from Scyon™, the advanced lightweight cement
composite with the heavy-duty performance. Not only is
it resistant to damage from termites, rot and fire*, but it
can also be gun nailed and is easy to cut – like timber.
Scyon™ Secura™ exterior flooring
What are the sizes?
Product
code
Length
(mm)
Width
(mm)
404050
2,700
600
19
404689
2,400
600
22
Mass
(kg/m2)
Edge
Colour
450
24.5
Light Blue
600
28.3
Dark Blue
Thickness Joint Centres
(mm)
(mm)
What are the accessories?
Accessory
Code
Page
HardieBlade™ Saw Blade 185mm
300660
51
HardieBlade™ Saw Blade 254mm
303375
51
HardieDrive™ Screws 40mm long
305533
51
James Hardie™ Joint Sealant^ 300ml cartridge
305534
54
James Hardie™ Joint Sealant^ 600ml sausage
305672
54
* When installed and maintained correctly and to the extent set out in James Hardie’s published literature current at the time of installation.
** A priming coat is recommended to be applied over all sheets before tiling, refer to the manual. ^ Not to be used in fire applications.
ALL PRICES INCLUDE GST. Ask in store about our Price Guarantee.
227
Scyon™ Secura™
interior flooring
228
“Celebrating 141 YEARS.”
Section 16 SCYON™ and JAMES HARDIE® PRODUCTS
Scyon™ Secura™
interior flooring
Scyon™ Secura™ interior fastener layout
What is it?
A heavy-duty but lightweight structural flooring substrate
that does double duty – it can be easily used for tile, vinyl
and carpet finishes over timber or steel floor joists in both
residential general interiors and wet areas. Simple and fast
to install, Scyon™ Secura™ interior flooring is the easiest
way to get top protection against moisture damage to all
interior floors.
Groove end
25mm min, distance
from tongue and groove
Where do you use it?
12mm min.
fastener edge
distance
50mm min.
corner
distance
Tongue end
Joists at 450mm max. centres
(for 19mm thick)
and 600mm max. centres
(for 22mm thick)
200mm
max.
As a substrate for direct fixing of tiles, vinyl and carpet
in residential floors and wet areas, as an alternative to
particle board, plywood or compressed fibre cement.
What are the key benefits?
Scyon™ Secura™ interior flooring
FAST AND EASY TO INSTALL. Scyon™ Secura™
interior flooring can be up to 40% faster to install than
conventional compressed fibre cement sheet. This is
because it’s made from Scyon™ which is about 24% lower
in density than compressed fibre cement, making it lighter,
and easier to handle and install, without compromising
heavy-duty performance. In fact, there’s no need for
pre-drilling and screwing, because it can be gun nailed
and is easy to cut like timber. It’s also tongue and grooved.
This edge delivers an engineered joint, eliminates the need
for timber trimmers under these joints, and is compatible
with other flooring products of the same thickness.
NO FUSS. The moisture-resistant sealer on all sides
combined with the moisture-resistant properties of
Scyon™, removes the need for full floor waterproofing
outside enclosed shower areas. And unlike some timber
products, tiles and vinyl can be directly fixed without the
need for an underlay sheet.
SECURITY. Secura™ interior flooring is resistant to
damage from moisture, so if rain holds you up during
construction and the roof’s not yet on**, the product won’t
need replacing or sanding because its warped and twisted,
like some timber products*. This resistance to moisture
damage also means that if there is a waterproofing failure
some time in the future, then the Secura™ interior flooring
will continue to perform, even if it gets wet. The strong,
no-squeak feel of Secura™ interior flooring also gives a
solid impression without the weight and cost of concrete.
What are the sizes?
Product
code
Mass
(kg/m2)
Edge
Colour
450
24.5
White
450
24.5
White
28.3
Dark Grey
Length
(mm)
Width
(mm)
Thickness Joint Centres
(mm)
(mm)
404173
2,700
600
19
403550
1,800
900
19
404691
2,400
600
22
600
What are the accessories?
Accessory
Code
Page
HardieBlade™ Saw Blade 185mm
300660
51
HardieBlade™ Saw Blade 254mm
303375
51
HardieDrive™ Screws 40mm long
305533
51
James Hardie™ Joint Sealant^ 300ml cartridge
305534
54
James Hardie™ Joint Sealant^ 600ml sausage
305672
54
MADE FROM SCYON. Secura interior flooring is made
from Scyon™, the advanced lightweight cement composite
with the heavy-duty performance. Not only is it resistant
to damage from termites, rot and fire*, it can also be gun
nailed and is easy to cut – like timber.
™
™
* When installed and maintained correctly and to the extent set out in James Hardie’s published literature current at the time of installation.
** Exposure to the elements should not be longer than three months.
^
Not to be used in fire applications.
ALL PRICES INCLUDE GST. Ask in store about our Price Guarantee.
229
Because it’s
HardieDeck™
not hard work
Because it’s
NEW HardieDeck™
not hard work
Build More Decks
HardieDeck™ goes down fast. The fast-track fixing system makes installation quicker so you
can build more decks. Using HardieDeck means no pre-drilling, counter-sinking or board
spacing and it’s more cost-effective than other decking materials.
HardieDeck is durable - it won’t split or rot and is resistant to termites, fire and moisture
damage - so you can focus on building new decks instead of fixing call backs. The fibre
cement boards and powder-coated aluminium accessories are all backed by a 10 year
warranty.
HardieDeck™ compressed fibre cement boards go
It’s not hard to build or maintain.
down fast and, with a 10 year warranty, are built to
Installation
last. The Fast-track fixing system makes installation
quicker and more
cost-effective
other
decking196mm wide and 3000mm long compressed fibre
HardieDeck
is fast
to install,than
with
uniform
materials,
creating
an
opportunity
to
install
cement decking boards. The boardsmore
are 19m thick and have grooves machined into the long
decks.
After
installation
the
196mm
wide
boards
edges. The fastening mechanism is concealed and the jointing system consists of an anodised
can be coated in your choice of colour. To watch an
aluminium
base jointer that is screwed to the framing
joists. A powder-coated snap-in cover
Installation Video scan the QR code.
The Fast-track fixing system makes installation quick.
then covers the screw heads and gives a continuous contrasting line between the decking
Visit HardieDeck.com.au
boards after the boards have been painted.
Available from
™ and ® denote a trademark owned by James Hardie Technology Limited.
230
“Celebrating 141 YEARS.”
Section 16 SCYON™ and JAMES HARDIE® PRODUCTS
4
3
5 or 6
1
2
7 or 8
Suitable for all Bushfire Prone Areas
The designer or specifier must refer to the HardieDeck™ System Installation Guide for suitability and design
considerations in the intended application. HardieDeck™ system must be coated or sealed, refer to Step 6. Ensure information is
up to date, if in doubt, visit HardieDeck.com.au or call 13 83 53 for information and advice.
System Components
1
Main decking board slotted in both short ends
HardieDeck™ Board
Dimensions: 196 x 3000 x 19mm
Part No. 404780
Approx Weight 18kg
Used to join all long edges of HardieDeck™ board
2
3
HardieDeck™ Double Winged Base Jointer
Part No. 305841
HardieDeck™ Snap-In Top Strip
Dimensions: 13 x 3000mm
Part No. 305842
Fastener
5
HardieDeck™ Fascia Edge Cap
7
5 per pack
Snap-in cover strip for double winged base jointer
4
6
Dimensions: 13 x 3000mm
Timber Frames:
Steel Frames:
5 per pack
8-10 gauge 25mm button head needle point screw
(min. class 3*)
8-18 gauge 16mm pan head metal tek screw
(min. class 3*)
Used for a concealed fascia and deck junction
Dimensions: 3000mm long
Part No. 305844
HardieDeck™ Slimline Edge Cap
Dimensions: 3000mm long
Part No. 305846
HardieDeck™ Edging Board
not
featured
Sold seperately
Decking board slotted in one short edge.
Used for exposed edges or as a fascia board
Dimensions: 196 x 3000 x 19mm
Part No. 404781
8
Sold seperately
Used for the deck edge with no fascia board
Approx Weight 18kg
Wider decking board with no slots. Used for breaking patterns and stair treads
HardieDeck™ Finishing Board
Dimensions: 296 x 3000 x 19mm
Part No. 404782
Approx Weight 27kg
Used to join HardieDeck board short edges
HardieDeck™ Wingless Base Jointer
Safe Working Practises
For information on safe working practices refer to the product MSDS and James
Hardie Best Practise Guide at HardieDeck.com.au and the safe workplace
government autority in your state to creat a safe working environment.
STORAGE AND HANDLING
To avoid damage, James Hardie® building products should be stored
with edges and corners of the product protected from chipping. James Hardie
building products must be installed in a dry state and protected from weather
during transport and storage. The product must be laid flat under cover on
a smooth level surface clear of the ground to avoid exposure to water and
moisture.
Dimensions: 13 x 3000mm
Part No. 305843
5 per pack
PROTECTIVE EQUIPMENT
When cutting, wear aproperly-fitted, approved dust mask or respirator
(e.g. P1 or P2) in accordance with applicable government regulations and
manufacturer instructions to further limit respirable silica exposures
CUTTING
Always cut outdoors. Position cutting station so wind will blow dust away
from the user or others in working area.
Use one of the following methods based on the required cutting rate:
FOR BOARDS
Dust reducing circular saw equipped
with HardieBlade® Saw blade vacuum
and filter appropriate for capturing fine
(respirable) dust.
Part no. 306660
ALL PRICES INCLUDE GST. Ask in store about our Price Guarantee.
FOR SMALL
SECTIONS
Jigsaw Blade
E.g. Makita B-60
Tungsten Jigsaw Blade
231
James Hardie Fire Rated Systems
HardieSmart™ Boundary wall system
A compact boundary wall solution
Designed for townhouses, terraces and detached
buildings where external walls are in close proximity
from the boundary and all bushfire zoned areas.
For every 10m wall length, gain 1.25m² of internal
space per wall.#
HardieSmart™ Aged care wall system
A simple and fast senior living wall solution
Used in separating walls between occupancies in
Aged Care buildings as well as common facilities and
corridors.
Increase internal floor space by up to 12% per wall.*
HardieSmart™ Intertenancy wall
system
A simple and fast common wall solution
Designed for common walls between tenancies in
multi-residential developments, townhouses and
terraces requiring semi-detached construction.
Increase internal floor space by up to 18% per
common wall.^
HardieSmart™ Zerolot wall system
Build as you sell
A dual boundary wall solution designed to provide fully
detached construction for townhouses and terraces
with minimum offset.
For every 10m wall length, gain 2.45m² of internal
space per dwelling.#
232
“Celebrating 141 YEARS.”
Section 16 SCYON™ and JAMES HARDIE® PRODUCTS
16
Scyon™ and James Hardie® Products
16.1 Scyon™ Axon™ | Matrix™ | Linea™
CODE
DESCRIPTION
16.2 Secura™ | HardiePlank™ | Hardieflex™
PRICE
SCYON™ AXON™ CLADDING (9mm) and ACCESSORIES
CODE
DESCRIPTION
PRICE
SCYON™ SECURA™ INTERIOR FLOORING (19mm and 22mm)
403931
133mm wide grooves / 2450 x 1200mm
$106.21
404173
2700 x 600mm x 19mm
$115.95
403932
133mm wide grooves / 2750 x 1200mm
$119.25
403550
1800 x 900mm x 19mm
$117.69
403933
133mm wide grooves / 3000 x 1200mm
$130.07
404691
2400 x 600mm x 22mm
$111.73
404510
Grained 133mm wide groove spacing 2450 x 1200mm
$106.22
SCYON™ SECURA™ EXTERIOR FLOORING (19mm)
404511
Grained 133mm wide groove spacing 2750 x 1200mm
$119.22
404050
2700 x 600mm x 19mm
$134.67
404512
Grained 133mm wide groove spacing 3000 x 1200mm
$130.00
404689
2400 x 600mm x 22mm
$127.37
404417
400mm wide grooves / 2450 x 1200mm
$103.24
PrimeLine® weatherboard (9mm) pre-primed and ACCESSORIES
404418
400mm wide grooves / 2750 x 1200mm
$115.87
400103
Chamfer - 4200 x 300mm
$47.56
404419
400mm wide grooves / 3000 x 1200mm
$130.07
400153
Heritage - 4200 x 300mm
$45.43
304560
JH 50mm wide Foam Back Sealing Tape 25m long roll
$80.83
400319
Newport - 4200 x 170mm
$29.45
305520
JH 9mm Aluminium Internal Corner 3000mm long
$40.12
400380
Summit - 4200 x 230mm
$40.88
305521
JH 9mm Aluminium External Corner 3000mm long
$ 39.91
305525
PrimeLine® Galvanised Universal Off Stud Joint Clip
305513
JH Aluminium Snap on Corner 3000mm long (2 pieces)
$ 74.95
305513
JH Aluminium Snap On Corner 3000mm
$74.53
305613
JH 9mm Aluminium Horizontal h Flashing 3000mm
$15.59
305568
JH 7.5mm PVC Starter Strip 3000mm long
$13.97
305614
JH 9mm Aluminium horizontal h Jointer
$0.96
SCYON™ MATRIX™ CLADDING (8mm) and ACCESSORIES
$0.57
HardiePlank™ weatherboard (7.5mm) and ACCESSORIES
400265
Smooth - 4200 x 230mm
$20.66
403810
Matrix Panel 2390 x 590
$49.85
400266
Smooth - 4200 x 300mm
$29.19
403812
Matrix Panel 1790 x 890
$49.29
403080
Woodgrain - 4200 x 230mm
$22.63
403811
Matrix Panel 1190 x 1190
$50.06
403081
Woodgrain - 4200 x 300mm
$31.82
404169
Matrix Panel 2990 x 1190
$110.09
400371
Old Style - 4200 x 205mm
$25.12
$23.32
400378
Rusticated - 4200 x 205mm (pre-primed)
26.18
305524
HardiePlank Galvanised Stud Clip
$0.44
403840
Scyon cavity trim 2450 x 70 (19mm)
305555
JH 18mmpvc cavity vent strip 3m
$9.30
305557
JH backing strip 1190mm
$4.77
305528
HardiePlank Zincalume Footmould 3000mm
$26.65
305558
JH backing strip 2390mm
$9.57
305548
HardiePlank Smooth PVC Jointer for 230mm
$0.67
305559
JH backing strip 2290mm
$11.98
305549
HardiePlank Smooth PVC Jointer for 300mm
$0.87
305565
JH facade washer box of 1000
$1.02
305550
HardiePlank Woodgrain PVC Jointer for 230mm
$0.76
SCYON™ LINEA™ WEATHERBOARD (16mm) and ACCESSORIES
305551
HardiePlank Woodgrain PVC Jointer for 300mm
$0.94
403930
HardiePlank Aluminium Ext Corner Soaker for 230mm
$1.74
4200 x 150
$29.67
305514
403912
4200 x 180
$36.90
305515
HardiePlank Aluminium Ext Corner Soaker for 300mm
$1.81
305512
Linea alum ext slim box corner 3.6mm
$82.78
305516
HardiePlank Aluminium Int Corner Soaker for 230mm
$1.47
305511
linea alum int corner mould 3.6m
$50.11
305517
HardiePlank Aluminium Int Corner Soaker for 300mm
$2.00
305570
linea pvc box cnr z flashing 2.7m
$14.65
305523
HardiePlank Galvanised Soaker Jointer for 205mm
$1.44
305571
linea pvc starter strip 3m
$13.48
305522
HardiePlank Galvanised Soaker Jointer for 230mm
$1.47
$3.24
305527
HardiePlank Galvanised Soaker Jointer for 300mm
$1.73
$3.14
305513
JH Aluminium Snap On Corner 3000mm (2 pieces)
$74.17
305572
linea 180mm alum cnr soaker 90o
305574
linea 150mm alum cnr soaker 90o
305510
linea alum uni window adaptor 3.7m
$42.70
HardieFlex™ sheet (4.5mm)
400195
1800 x 900mm
$16.12
$78.78
400193
2400 x 900mm
$21.49
$109.77
400192
2700 x 900mm
$24.15
$66.79
400191
3000 x 900mm
$26.86
Stria™ Vertical Flashing Stop 3000mm
$23.99
400189
1800 x 1200mm
$21.48
SCYON™ STRIA™ CLADDING and ACCESSORIES
404063
Standard profile 4200 x 325 x 14mm
404413
Wide Profile 4200 x 405 x 14mm
404522
Splayed profile 4200 x 255 x 16mm
305547
305518
JH 14mm Aluminium Internal Corner 3000mm
$40.93
400188
2100 x 1200mm
$25.06
305519
JH 14mm Aluminium External Box Corner 3000mm
$53.02
400186
2400 x 1200mm
$28.66
305511
JH 16mm Aluminium Internal Corner Mould 3600mm
$50.11
400184
2700 x 1200mm
$32.24
305564
JH 75x75mm Colorbond® Corner Flashing 3000mm
$23.84
400182
3000 x 1200mm
$35.81
305630
JH 16mm Aluminium External Trim Corner 3000mm
$47.60
HardieFlex™ sheet (6mm)
SCYON™ AXENT™ TRIM
403626
45 x 38 x 4200mm
400175
2400 x 900mm
$32.62
401970
3000 x 900mm *
$45.04
Available through Finlayson’s
$37.09
404662
45 x 19 x 4200mm
$35.83
400173
1800 x 1200mm
$32.62
404402
89 x 38 x 3640mm sanded/grooved back
$52.80
400171
2400 x 1200mm
$43.51
404400
89 x 19 x 3640mm sanded/grooved back
$37.63
400169
2700 x 1200mm
$48.94
403840
Scyon Cavity Trim 70 x 19 x 2450mm
$23.45
400167
3000 x 1200mm
$54.38
ALL PRICES INCLUDE GST. Ask in store about our Price Guarantee.
233
16
Scyon™ and James Hardie® Products
16.3 PanelClad® | HardiTex™ | ExoTex™
CODE
DESCRIPTION
16.4 ComTex® | Villaboard® | Versilux®
PRICE
PanelClad® SHEET (6mm) and ACCESSORIES
CODE
DESCRIPTION
400404
Stucco - 2440 x 1200mm
$68.23
305557
James Hardie™ Backing Strip 1190mm
$43.20
400417
TextureLine - 2700 x 1198mm
$86.21
305558
James Hardie™ Backing Strip 2390mm
$86.94
305780
TextureLine PVC Straight Jointer 2700mm
$4.99
305559
James Hardie™ Backing Strip 2990mm
$108.72
305556
ExoTec® Gasket Snap Strip 3620mm
$188.27
HardieTex™ system base sheet (7.5mm) and ACCESSORIES
400293
2440 x 900mm
$32.70
304572
ExoTec® Top Hat 6000mm
$82.19
400295
2725 x 900mm
$36.51
304571
ExoTec® Top Hat 7200mm
$109.67
400296
3000 x 900mm
$40.22
302701
James Hardie™ Intermediate Top Hat 6000mm
$58.32
401651
2440 x 1200mm
$43.97
302700
James Hardie™ Intermediate Top Hat 7200mm
$69.99
400294
2725 x 1200mm
$48.71
305565
James Hardie™ Façade Washers
$86.67
400291
3000 x 1200mm
$53.63
ComTex® FACADE PANEL (9mm)
305568
7.5mm PVC Starter Strip 3000mm
$13.90
400144
2400 x 1200mm
$113.86
305569
HardieTex™ 7.5mm PVC Z Flashing 3000mm
$11.29
400143
3000 x 1200mm
$142.35
ComTex® FIXING SYSTEM
EasyLap™ panel (8.5mm) and ACCESSORIES
404186
3000 x 900mm
$68.07
305553
ComTex® PVC Starter Strip 3600mm
$11.22
304573
ComTex® Top Hat 6000mm
$58.65
404184
2440 x 1200mm
$73.83
404185
3000 x 1200mm
$90.75
302701
James Hardie™ Intermediate Top Hat 6000mm
$58.32
304560
50mm wide Foam Back Sealing Tape 25m roll
$80.83
302700
James Hardie™ Intermediate Top Hat 7200mm
$69.99
305520
9mm Aluminium Internal Corner 3000mm
$40.13
305521
9mm Aluminium External Corner 3000mm
$39.91
400367
2400 x 900mm
$26.47
$15.59
400366
3000 x 900mm
$33.09
$1.02
400364
1800 x 1200mm
$26.48
305613
305614
9mm Aluminium Horizontal h Flashing 3000mm
9mm Aluminium horizontal h Jointer
Villaboard® LINING (6mm)
400362
2400 x 1200mm
$33.77
400393
2400 x 450mm
$10.74
400361
2700 x 1200mm
$40.28
400392
2400 x 600mm
$14.33
400360
3000 x 1200mm
$42.22
400391
2400 x 750mm
$17.91
400359
3600 x 1200mm
$53.70
HardieFlex™ SHEET (6mm) in eaves lining sizes
400358
4200 x 1200mm
$61.64
400389
400370
2400 x 1350mm
$39.24
400369
3000 x 1350mm
$47.40
HardieFlex™ SHEET (4.5mm) in eaves lining sizes
2400 x 600mm
$21.35
HardieFlex™ SHEET in eaves lining sizes ACCESSORIES
305506
PVC Eave and Soffit Expressed Jointer (White)
$6.03
400368
3600 x 1350mm
$58.87
305432
PVC Eave and Soffit Expressed Jointer (Black)
$8.08
400363
4200 x 1350mm
$84.64
305538
PVC Straight Jointer for 4.5mm thick sheets 2400mm
$3.04
305541
PVC Straight Jointer for 4.5mm thick sheets 3000mm
$4.17
400357
2400 x 1200mm
$61.64
$6.12
400356
2700 x 1200mm
$69.35
400355
3000 x 1200mm
$77.01
305546
PVC Straight Jointer for 6mm thick sheets 3000mm
ExoTec® FACADE PANEL (9mm)
Villaboard® LINING (9mm)
402200
1800 x 900mm
$77.87
400354
3600 x 1200mm
$92.70
402204
2400 x 900mm
$103.86
403331
3000 x 1350mm
$26.62
402208
3000 x 900mm
$129.75
Villaboard® LINING (12mm)
402201
1800 x 1200mm
$105.29
400352
402203
2100 x 1200mm
$121.09
Versilux® LINING (4.5mm)
402205
2400 x 1200mm
$135.16
400454
2400 x 900mm *
$29.58
2400 x 1200mm *
$43.38
3000 x 1200mm
$111.22
402207
2700 x 1200mm
$155.69
400452
402209
3000 x 1200mm
$172.96
400450
3000 x 1200mm *
$54.21
400449
3600 x 1200mm *
$65.06
ExoTec® FACADE PANEL (12mm)
402333
2400 x 1200mm
$208.87
402334
3000 x 1200mm
$254.80
Available through Finlayson’s
234
PRICE
EXOTEC® FIXING SYSTEM - USED WITH 9mm EXOTEC® FACADE
“Celebrating 141 YEARS.”
Section 16 SCYON™ and JAMES HARDIE® PRODUCTS
Scyon™ and James Hardie® Products
16.5 Versilux® | PineRidge® | HardiePanel®
CODE
DESCRIPTION
PRICE
Versilux® LINING (6mm)
16
16.6 HardieScreen® | Artista® | HardieSmart®
CODE
DESCRIPTION
PRICE
HardieScreen™ LATTICE (6mm)
400425
3000 x 900 - Bevelled Edge †
$47.57
400254
Diamond - 2400 x 1200mm
$101.58
400424
2400 x 1200 - Bevelled Edge †
$50.76
400258
Square - 2400 x 1200mm
$101.58
400423
2700 x 1200 - Bevelled Edge †
$58.47
Artista CLASSIC COLUMN
400422
3000 x 1200 - Bevelled Edge †
$64.95
402874
195mm x 2750mm
$262.80
400421
3600 x 1200 - Bevelled Edge †
$77.94
402873
195mm x 4000mm
$340.24
404774
3000 x 900 - Square Edge †
$48.69
402876
250mm x 2750mm
$323.03
404775
2400 x 1200 - Square Edge †
$51.94
402875
250mm x 4000mm
$418.07
404776
2700 x 1200 - Square Edge †
$57.05
400552
345mm x 2750mm
$468.22
404777
3000 x 1200 - Square Edge †
$63.40
400550
345mm x 4000mm
$606.01
404778
3600 x 1200 - Square Edge †
$76.06
400593
425mm x 2750mm
$657.57
400591
425mm x 4000mm
$850.88
Versilux® LINING (9mm)
®
$87.04
Artista® TAPERED COLUMN
PineRidge® LINING (6mm) and ACCESSORIES
402882
250 to 195mm x 2750mm
$459.13
400373
$45.10
402912
345 to 250mm x 2750mm
$705.61
$47.95
Artista® COLUMN CAPITALS, BASES and ACCESSORIES
401878
2700 x 1200mm*
2540 x 1198mm
400372
2700 x 1198mm
305780
TextureLine PVC Straight Jointer 2700mm
402867
195mm Bell
$102.47
402868
195mm Cove
$102.47
402866
195mm Ornate
$168.62
HardiePanel™ COMPRESSED SHEET (15mm)
402865
195mm Pencil Round
400090
$88.19
402850
195mm Quad
$63.26
195mm Twin
$118.40
$108.31
$4.86
HardieGroove™ LINING (7.5mm)
400245
2700 x 1200mm
1500 x 900mm
$115.83
$92.30
400089
1800 x 900mm
$105.85
402860
400087
2400 x 900mm
$143.52
402871
250mm Bell
400085
3000 x 900mm
$176.43
402872
250mm Cove
$117.12
400084
1500 x 1200mm
$117.60
402851
250mm Ornate
$186.23
400083
1800 x 1200mm
$141.12
402870
250mm Pencil Round
400082
2100 x 1200mm
$164.66
402852
250mm Quad
$66.22
250mm Twin
$123.22
345mm Ornate
$227.98
400081
2400 x 1200mm
$188.17
402869
400080
2700 x 1200mm
$211.68
400570
400079
3000 x 1200mm
$235.20
HardiePanel™ COMPRESSED SHEET (18mm)
$97.75
400572
345mm Pencil Round
$112.93
400611
425mm Ornate
$442.71
400101
1500 x 900mm
$102.56
400613
425mm Pencil Round
$133.60
400100
1800 x 900mm
$122.01
305577
Artista® Bracket 195mm overall diameter
$133.60
$163.09
305578
Artista® Bracket 250mm overall diameter
$138.00
Joiner Sleeve 345mm Flush
$43.22
$91.82
400099
2400 x 900mm
400098
3000 x 900mm
$205.15
400568
400097
1500 x 1200mm
$136.77
400569
Joiner Sleeve 345mm Rebated
400096
1800 x 1200mm
$161.19
400609
Joiner Sleeve 425mm Flush
400095
2100 x 1200mm
$191.47
400610
Joiner Sleeve 425mm Rebated
400094
2400 x 1200mm
$215.06
HardieBreak™ THERMAL STRIP
400460
3000 x 1200mm
$263.27
305612
2400 x 1200mm†
$9.56
HardieWrap™ WEATHER BARRIER
HardiePanel™ COMPRESSED SHEET (24mm)
400461
HardieBreak Thermal Strip 43 x 12 x 2750mm
$51.55
$108.65
$319.30
305664
HardieWrap Weather Barrier 2.75 x 30m
$156.76
HardieFire™ INSULATION
UNDERLAY SHEETS
403190
JH Ceramic Tile Underlay 6mm - 1800 x 1200
$102.56
305790
HardieFire Insulation 560x1160x85mm 5pk
$96.75
400459
JH Vinyl and Cork Underlay 5mm - 1200 x 900
$122.01
305791
HardieFire Insulation 420x1160x85mm 5pk
$72.56
HardieBrace™ SHEET (5mm)
400159
2440 x 925mm
$23.81
400158
2725 x 925mm
$26.61
400157
2440 x 1225mm
$31.55
400156
2725 x 1225mm
$35.24
ALL PRICES INCLUDE GST. Ask in store about our Price Guarantee.
235
16
Scyon™ and James Hardie® Products
16.7 HardieDeck®
CODE
DESCRIPTION
PRICE
HardieDeck™ SYSTEM
404780
Decking Board 19 x 196 x 3000mm
$49.88
305841
Double Winged Base Jointer Bag of 5 3000mm
$44.40
305842
Snap-in top Strip Bag of 5 3000mm
$51.23
HardieDeck™ OPTIONS
404781
Edging Board
19 x 196 x 3000mm
$57.78
404782
Finishing Board 19 x 296 x 3000mm
$71.00
305843
Wingless Express Jointer 3000mm
$47.85
305844
Fascia Edge Cap 3000mm
$61.47
305846
Slimline edge cap 3000mm
$52.95
16.8 General Accessories
DESCRIPTION
300653
James Hardie™ Fibreshears
PRICE
300660
HardieBlade™ Saw Blade 185mm diameter
$182.65
303375
HardieBlade™ Saw Blade 254mm diameter
$309.89
305532
HardieDrive™ Screw 32mm long
$55.68
305533
HardieDrive™ Screw 40mm long
$63.57
305529
HydrEpoxy® 501 (two-part epoxy, 2 litre set)
305535
James Hardie™ Base Coat 4kg tub
$98.82
304491
James Hardie™ Base Coat 15kg bag
$41.71
305536
James Hardie™ Top Coat 3kg tub
$82.99
$1055.46
$104.51
304493
James Hardie™ Top Coat 15kg tub
$49.84
305564
James Hardie™ 75 x 75mm Colorbond® Corner Flashing 3000mm
$28.34
305534
James Hardie™ Joint Sealant 300ml cartridge
$16.27
305672
James Hardie™ Joint Sealant 600ml sausage
$22.31
305542
James Hardie™ PVC Cap Mould for 4.5mm thick sheets 3000mm
$4.17
305543
James Hardie™ PVC Cap Mould for 6mm thick sheets 3000mm
$4.17
$14.99
305554
James Hardie™ 45 x 45mm PVC Corner Angle Mould 3000mm
305544
James Hardie™ PVC External Corner Angle for 6mm thick sheets 3000mm
$4.17
305545
James Hardie™ PVC Internal Corner Angle for 6mm thick sheets 3000mm
$4.17
305552
James Hardie™ PVC Flashing Mould for 6mm thick sheets 3000mm
305538
James Hardie™ PVC Straight Jointer for 4.5mm thick sheets 2400mm
$10.46
$3.31
305541
James Hardie™ PVC Straight Jointer for 4.5mm thick sheets 3000mm
$4.17
305546
James Hardie™ PVC Straight Jointer for 6mm thick sheets 3000mm
$4.17
305576
James Hardie™ Score and Snap Knife
$14.18
TH
E
R
TALL
INS
“Celebrating 141 YEARS.”
U
236
CODE

Similar documents

71700 JH Scyon Axon Product Flyer.indd

71700 JH Scyon Axon Product Flyer.indd 1 When installed any maintained correctly and to the extent set out in James Hardie’s published literature current at the time of installation. James Hardie™ and ® denotes a trademark or registered...

More information