71700 JH Scyon Axon Product Flyer.indd
Transcription
71700 JH Scyon Axon Product Flyer.indd
Tough like us. Made for New Zealand. A pristine look that lasts. Scyon® Axon® Panel Advanced Material Scyon® Axon® Panel is a vertically grooved panel with a 133mm or 400mm wide groove pattern that looks sharp and uniform. Pre-primed and easy to install, Scyon® Axon® Panel is a pristine look that lasts. Made from an advanced lightweight cement composite with heavy duty performance, Scyon® Axon® Panel is resistant to damage from fire, moisture and rot1. It is also easy to cut and gun-nailable. Advanced Material Fire Resistant Made In Nz Certified & Tested Sustainable Technical Support The designer says A design alternative to traditional vertical features and the option of brad nailing also minimises visual interruptions. James Hardie provides me with a great online technical & design resource via ACCEL.co.nz. It gives me the confidence to design with the range of Scyon products. Rot Resistant Damage Resistant Easy To Cut Gun-Nailable The builder says The stepped shiplap on the long edges of the panel allows sheets to be easily installed. It’s pre-primed for fast paint application. The product is backed by great customer service & technical support to ensure I complete the project on time. It is a product that I trust to build with. SPECIFICATIONS Scyon® Axon® Panel Grained 133 — Sheet sizes Product Code NEW Length Width Thickness Units per Pack Weight per Pack mm mm mm 404510 2450 1200 9 30 kg 1190 404511 2750 1200 9 30 1330 404512 3000 1200 9 30 1460 Units per Pack Weight per Pack Scyon® Axon® Panel Smooth 133 — Sheet sizes Product Code Length Width Thickness mm mm mm 403780 2450 1200 9 30 1190 403781 2750 1200 9 30 1330 403782 3000 1200 9 30 1460 Units per Pack Weight per Pack kg Scyon® Axon® Panel Smooth 400 — Sheet sizes Product Code Length Width Thickness mm mm mm 404414 2450 1200 9 30 1190 404415 2750 1200 9 30 1330 404416 3000 1200 9 30 1460 kg Scyon® Axon® Panel — Accessories* ® Code CLD Structural Cavity Batten 19mm thick fibre cement cavity batten installed over RAB Board or a building underlay. Axon Panels are fixed to the battens. 2450mm. 403870 Aluminium Horizontal ‘h’ Mould A horizontal flashing for horizontal joints. 9mm etch prime. 3000mm. 304508 Aluminium External Box Corner A box corner mould to form the external joints. 9mm etch prime. 2450mm, 2750mm, 3000mm. 304509 (2450mm) 304510 (2750mm) 305150 (3000mm) Aluminium ‘h’ Mould Jointer A jointer to cover the butt joint of H mould. 100mm etch prime. 304512 uPVC Corner Underflashing A 50 x 50mm corner underflashing for internal joints. 3000mm. 303745 uPVC Vent Strip Used to provide protection from vermin entering cavity space. 3000mm. 302490 INSEAL® 3259 Tape Black 50mm tape to be used under the vertical shiplap joint. Black 80mm tape to be used at corners. 300767 (50mm) 300769 (80mm) HardieBlade™ Saw Blade Diamond tip 184mm diameter fibre cement circular saw blade. Spacers not included. 300660 1 When installed any maintained correctly and to the extent set out in James Hardie’s published literature current at the time of installation. James Hardie™ and ® denotes a trademark or registered trade mark owned by James Hardie Technology Limited. © 2013 James Hardie New Zealand. ™ and ® denote a trademark or registered mark owned by James Hardie Technology Limited.
Similar documents
Scyon™ and James Hardie® Products
because it’s made from Scyon™ which is about 24% lower in density than compressed fibre cement, making it lighter, and easier to handle and install, without compromising heavy-duty performance. In ...
More information