professional plumbing products catalog

Transcription

MYERS
®
PROFESSIONAL PLUMBING
PRODUCTS CATALOG
SUMP, SEWAGE, AND EFFLUENT PUMPS,
packaged systems AND accessories
Sump pump model SSM331 shown here
www.FEMYERS.com
AB O UT PENTA I R
A Premier Line of Quality
Pumps Since 1870
Myers was founded in 1870 by Francis and Philip Myers in Ashland, Ohio. The brothers
began by building farm implements and then engineered and manufactured the first
double-acting hand pump that delivered water on both the up and down strokes.
From this modest beginning, the Myers pump line grew and evolved over the decades
to include wastewater removal and industrial pumps and systems. In 1960 the
Myers family sold the business to the McNeil Corporation of Akron, Ohio. In 1986 the
business was acquired by Pentair, and is now part of this $8 billion corporation’s water
products group.
®
The Pentair facility in Ashland is located on 80 acres and operates in a modern
410,000 square foot manufacturing, distribution, foundry, and office facility, employing
approximately 600 people dedicated to supplying top quality jet and submersible well
pumps; utility, sump and sewage pumps; effluent pumps; non-clog and other large
waste handling pumps; and high pressure reciprocating and centrifugal pumps and
pumping systems for residential, agricultural, commercial, municipal and industrial
applications for North America and more than 100 foreign countries.
TABLE OF CONTENTS
SUMP PUMPS 4-13
SP Series………………………………………………… 4
MCI033/MCI050……………………………………… 8
ED-25 Sink Pump System…………………… 12
MS Series………………………………………………… 5
MCSP Series…………………………………………… 9
ED33 Series…………………………………………… 13
MDC33/MDC50 Series……………………………… 6
SX50 Series…………………………………………… 10
SSM33I Series………………………………………… 7
PSB1822 Sump Basin Package…………… 11
BATTERY BACK-UP SUMP PUMPS
MBSP…………………………………………………… 14
14-15
MBSP-Plus Series………………………………… 15
EFFLUENT PUMPS 16-26
S40HT Series………………………………………… 16
ME40-CI Series…………………………………… 20
MD Series……………………………………………… 24
S50HT Series………………………………………… 17
ME45 Series………………………………………… 21
2NFL and J-BE Series………………………… 25
ME3 Series…………………………………………… 18
ME Series……………………………………………… 22
ME40 Series………………………………………… 19
P50/P100 Series…………………………………… 23
SEWAGE PUMPS 27-37
SRM4…………………………………………………… 27
WHR Series…………………………………………… 31
SRM-BP BasinPro………………………………… 35
CMV5…………………………………………………… 28
WHR5H-WHR20H Series……………………… 32
CMV-BP BasinPro………………………………… 36
MW50…………………………………………………… 29
SR1830………………………………………………… 33
MW-BP………………………………………………… 37
MW Series…………………………………………… 30
CMV1830……………………………………………… 34
GRINDER PUMPS 38-43
MRG20…………………………………………………… 38
Retrofit System……………………………………… 40
G3D Series…………………………………………… 42
MRG20 Grinder Pump Systems…………… 39
G2DT/G2D Series………………………………… 41
Grinder Series Performance………………… 43
WASTEWATER SOLIDS HANDLING PUMPS 44-55
3MW Series…………………………………………… 44
V15D Series…………………………………………… 48
Simplex and Duplex Package Systems… 52
3WHV Series………………………………………… 45
V2D Series…………………………………………… 49
Basin Selection Guide…………………………… 53
3RMW Series………………………………………… 46
V3D Series…………………………………………… 50
Selection Guide…………………………………… 54
V1D Series…………………………………………… 47
Vortex Series Performance…………………… 51
STAINLESS STEEL PUMPS 56-59
DU25……………………………………………………… 56
DE Series……………………………………………… 58
DS Series……………………………………………… 57
DSW Series…………………………………………… 59
SPECIAL PURPOSE PUMPS 60-65
Pro-Source Pumper…………………………… 60
MCU15/MCU15S/MCU20S Series………… 62
SPS-4…………………………………………………… 64
MES106………………………………………………… 61
MUSP125……………………………………………… 63
EPP Series Pump Control System………… 65
®
ACCESSORIES 66-73
SRA Lift-out System……………………………… 66
MFS Series Pump Switch……………………… 68
Discharge and Conduit Flanges…………… 69
CE, CMEP and CMW……………………………… 67
SA-1/OSA-1 Sump Alarms…………………… 69
Flexible Rubber Inlet Hubs…………………… 69
SMFNO, SMFNC, and SMFXNO
Float Controls……………………………………… 68
Check Valves………………………………………… 69
Basins and Covers………………………………… 69
CA-SS4 Alarm and Connection Box……… 69
Controls………………………………………………… 70
Simplex, Duplex Structural
Foam Junction Boxes…………………………… 69
Detector, Float Switches, Power Cords… 71
Iron Caulking &
Compression-Type Hubs……………………… 69
Flushing Tubes & Adapters………………… 73
MFLC Wide-Angle Mechanical
Float Controls……………………………………… 68
ALC-18 Piggyback Switches………………… 68
20VM SJE Vertical Master
Pump Switch………………………………………… 68
3
Leg Kits………………………………………………… 72
SUMP PUMPS
GOO D
BETTER
BEST
SP Series
1/3 and 1/2 HP Residential Sump Pumps
SPECIFICATIONS
SPECIFICATIONS
SPECIFICATIONS
CAPACITY LITERS PER MINUTE
basement sumps, dewatering
200 LPM
Shut-off head
24’
7.3 m
Operation:
Tethered:On
Off
Vertical:On
Off
14”
6”
8
3.5
356 mm
152 mm
203 mm
89 mm
Solids handling
1/8”
3.2 mm
Continuous liquid temp
77°F
25°C
Motor
1/3 HP: 9.0 FLA shaded pole
motor 3450 RPM with thermal
overload protection; 1/2 HP: 5.5
FLA PSC motor 3450 RPM with
thermal overload protection
45
60
75
90
7
SP33
20
6
1/3
15
HP
5
4
3
10
2
5
0
1
0
15
30
45
60
75
CAPACITY GALLONS PER MINUTE
Liquids handling
Electrical data
30
HP
54 GPM
15
/2
51
SP5
Capacities
TOTAL HEAD IN FEET
Applications
0
TOTAL HEAD IN METERS
25
NEW!
ENTRY
LEVEL SUMP PUMPS
FOR RESIDENTIAL
A P P L I CAT I O N S
115V, 1Ø, 60Hz
Acceptable pH range
Shaft seal
Double lip
Housing
Zinc
Power cord
8’, SJTW
Discharge
1-1/4” FNPT or
1-1/2” MNPT
Min. basin diameter
Tethered:
Vertical:
14”
10”
2.4 m
356 mm
254 mm
FEATURES
• High-impact corrosionresistant engineered resin
construction
• Piggy-back style float
for automatic or manual
operation
• Oil-filled motor for
continuous lubrication
• Easily replaceable 8’ power
cord with optional lengths
available
• Automatic reset overload
provides safe operation
4
M9008SSE
SUMP PUMPS
GOO D
BETTER
BEST
MS Series
1/3 HP and 1/2 HP Submersible Sump Pumps
30
Applications
Capacities
TOTAL HEAD IN FEET
SPECIFICATIONS
SPECIFICATIONS
Basement sumps, dewatering
66 GPM
250 LPM
Shut-off head
25’
7.6 m
Operation:
Tethered: On
Off
Vertical: On
Off
14”
5”
7.5”
3”
356 mm
127 mm
190.5 mm
76 mm
Solids handling
1/4”
6.4 mm
Liquids handling
Drain water
Intermittent liquid temp
up to 140°F
Motor
1/3 HP & 1/2 HP, PSC
Electrical data
3000 RPM, 115V, 1Ø, 60Hz
FLA 1/3 HP = 3.9, 1/2 HP = 4.1
Acceptable pH range
6-9
Shaft seal
Double lip
Motor housing
Zinc
Volute case
Cast iron
Power cord
8’
Discharge, NPT
1-1/2”
Min. sump diameter
Float:
Vertical:
14”
10”
25
20
MS
MS
50V
33
15
V1
,M
S3
1, M
S5
0T
1
3T
1
10
5
0
0
10
20
30
40
50
60
70
80
CAPACITY IN GALLONS PER MINUTE
up to 60°C
!
NEW
2.4 m
356 mm
254 mm
FEATURES
• Versatility for many
light-duty jobs
• Designed for drain water
removal or permanent
applications with small
amounts of debris
• Maintenance-free
operation
• Wide-angle or vertical
mechanical switch for
small 10”diameter sumps
• Dual ball-bearing motor
and additional lip seal
provide durability and
longer pump life
• Durable PSC motor
for years of service
• Oil-filled PSC motor
for maximum heat
dissipation, continuous
bearing lubrication
• Thermal overload
protection with automatic
reset
• CSA Listed
5
M9009SSE
SUMP PUMPS
GOO D
BETTER
BEST
MDC33/MDC50 Series
1/3 and 1/2 HP Cast Iron Submersible Sump Pumps
SPECIFICATIONS
SPECIFICATIONS
basement sumps,
dewatering, light effluent,
water transfer
Capacities
62 GPM
235 LPM
Shut-off head
32’
9.8 m
Operation:
Manual
Tethered models: On
Off
Vertical models: On
Off
12-1/2”
3-1/2”
6-1/2”
2”
318 mm
89 mm
165 mm
51 mm
Solids handling
1/2”
12.7 mm
Liquids handling
drainage effluent
130°F
Motor electrical data
1/3 HP, 9.8A; 1/2 HP, 12A;
shaded pole w/thermal
overload protection,115V, 1Ø,
60Hz, 1550 RPM
Acceptable pH range
6-9
Shaft seal
carbon & ceramic
Housing
heavy cast iron
Power cord
10’ (3 m) or 20’ (6 m), 16/3,
SJTW, SJTW-A
Discharge, NPT
1-1/2”
Min. sump diameter
Float:
Vertical:
14”
10”
50
100
150
200
250
10
TOTAL HEAD IN FEET
Applications
0
30
MDC
50 1
20
8
/2 H
P
6
MDC
33
1/3
HP
4
10
2
0
20
40
60
80
0
54°C
356 mm
254 mm
FEATURES
• 1/3 or 1/2 HP
• Rugged cast iron pump
body and motor cover,
exterior hardware
stainless steel
construction
• 1-1/2” (38 mm)
NPT discharge
• Ball-bearing construction
for long life
• Easily replaceable power
cord with optional lengths
available
• CSA Listed
• Carbon/ceramic shaft seal
• Piggyback-style float
for automatic or
manual operation
• Oil-filled motor with
automatic reset overload
6
M9011SSE
40
SUMP PUMPS
GOO D
BETTER
BEST
SSM331 Series
1/3 HP Cast Iron Submersible Sump and Effluent Pumps
SPECIFICATIONS
SPECIFICATIONS
31 GPM
117 LPM
Shut-off head
23’
7m
Operation: On
Off
9.94”
4.06”
252 mm
103 mm
Solids handling
1/2”
12.7 mm
Liquids handling
drainage effluent
Intermittent liquid temp up to 140°F
Electrical data
Shaded pole, 115V, 9A, 1Ø, 60Hz
Acceptable pH range
5-9
Shaft seal
type 11A, carbon & ceramic
Housing
heavy cast iron
Power cord
10’ (3 m), 16/3, SJTW, SJTW-A
Discharge, NPT
1-1/2”
Min. sump diameter
Vertical 10”
Tethered 14”
60
75
90
105
120
7
SSM331 1/3
HP
6
18
5
16
14
4
12
10
3
8
2
6
4
1
2
0
5
10
15
20
25
30
up to 60°C
1/3 HP
45
20
0
Motor
30
FEATURES
• Designed for light
demanding drainage
applications
• Removal of drainage
water and light septic tank
effluent
• Automatic and manual
operation models
available
• Maintenance-free
operation
• Piggyback wide-angle or
vertical mechanical switch
• Heavy-duty reliability
• Oil-filled motor
for maximum heat
dissipation, continuous
bearing lubrication
• Recessed vortex impeller
for free flow of liquids
and solids
reset
• CSA Listed
7
M9010SSE
basement sumps, dewatering,
light effluent
Capacities
15
22
TOTAL HEAD IN FEET
Applications
0
SUMP PUMPS
GOO D
BETTER
BEST
MCI033/MCI050 Series
1/3 and 1/2 HP Cast Iron Submersible Sump Pumps
light effluent, water transfer
Capacities
62 GPM
235 LPM
Shut-off head
32’
9.8 m
Operation: On
Off
9”
4”
229 mm
102 mm
Operation
automatic
Solids handling
1/2”
Liquids handling
drainage effluent
130°F
1/3 HP, 9.8A; 1/2 HP, 12A;
shaded pole w/thermal overload protection, 115V, 1Ø, 60Hz,
1550 RPM
Acceptable pH range
6-9
Shaft seal
carbon & ceramic
Housing/volute
heavy cast iron
Volute base
fiberglass reinforced
polypropylene
Impeller
fiberglass-reinforced Noryl ®
with threaded brass insert
Exterior hardware
stainless steel
Power cord
10’ (3 m) or 20’ (6 m),
16/3, SJTW-A, SJTW
Discharge, NPT
1-1/2”
Min. sump diameter
11”
0
50
100
150
200
250
10
30
TOTAL HEAD IN FEET
Applications
35
8
25
MCI
050
MCI0
20
33 1
/3
15
1/2
HP
6
HP
4
10
2
5
0
12.7 mm
0
10
20
30
40
50
60
SPECIFICATIONS
SPECIFICATIONS
0
70
54°C
279 mm
Noryl® is a registered trademark of the General Electric Company.
FEATURES
• 2-pole switch design
allows for operation in
sump diameters of 10” or
more
• Rugged, oil-cooled motor
provides continuous
bearing lubrication
and maximizes heat
dissipation
• Long-life carbon/ceramic
seal protects motor
against water leakage
• Heat sensor overload
reset when motor
cools to safe operating
temperature
• Lubricated ball bearings
and shaft seal for longer
service life
• Shaded pole motor
eliminates failure-prone
switches and relays
8
• Anti-airlock hole in base
reduces added labor
• Pump intake screen,
volute base, switch and
power cord are serviceable
• CSA Listed
M9180SSE
SUMP PUMPS
GOO D
BETTER
BEST
MCSP Series
1/3 HP Pedestal Sump Pumps
SPECIFICATIONS
basement sumps
Capacities
50 GPM
TOTAL HEAD IN FEET
Applications
189.3 LPM
Shut-off head
18’
5.5 m
Operation: On
Off
12”-13”
3”-4.5”
305-330 mm
76-144 mm
Solids handling
1/8”
3.18 mm
Liquids handling
drain water
77° F
Motor
1/3 HP
Electrical data
1625 RPM, 115V, 3.5A, 1Ø, 60Hz
Acceptable pH range
6-9
Shaft seal
none
Volute
thermoplastic or cast iron
Power cord
6’, 18/3, SJT
Discharge, NPT
MCSP3:
MCSP31:
1-1/4”
1-1/2”
Min. sump diameter
12”
50
70
90
110
130
170
6
MCSP
4
12
3
8
2
4
25° C
150
5
16
0
Liquid temp.
30
1
0
10
20
30
40
0
50
305 mm
FEATURES
• Ideal for basements
needing frequent drainage
• Quick and easy installation
• Fits 12” diameter x 24”
deep or larger sump pits
• Available with
corrosion-resistant
thermoplastic or cast iron
pump housing and base
• Built-in reliability,
ease of operation
protection to prevent
motor overload
• Top-mounted adjustable
float switch for easy
accessibility
• Top-screened inlet
to reduce clogging
• CSA Listed
9
M9007SSE
10
20
SUMP PUMPS
GOO D
BETTER
BEST
SX50 Series
Explosion-Proof 1/2 HP Submersible Sump Pump and Control Panel Package
Capacities
class 1, division 1, group D
hazardous locations
95 GPM
360 LPM
Shut-off head
34’
Operation: On/
Off
turns on/off with tethered
switchhooked to control box
Solids handling
(SX50; SX50H)
2” / 3/4”50 mm / 19 mm
Liquids handling
domestic effluent & drain water
up to 140°F
1/2 HP, 1750 RPM,
1Ø - capacitor start, 230V, 60Hz
Acceptable pH range
6-9
Winding insulation
temp. (Class B)
266°F
Specific gravity
.9-1.1
Viscosity
28 –35 SSU
Discharge, NPT
SX50:
SX50H:
2”
1-1/2”
Min. sump diameter
Simplex:
Duplex:
24”
36”
0
50
100
150
200
250
300
350
35
TOTAL HEAD IN FEET
Applications
40
10 m
10
SX5
0H
30
12
8
25
SX50
20
6
15
4
10
2
5
0
0
10
20
30
40
50
60
70
80
90
0
100
up to 60°C
up to 120°C
610 mm
914 mm
FEATURES
• Rugged, submersible,
explosion-proof sump
pumps for municipal,
commercial and
industrial use
• Constructed for use in
Class 1, Division 1, Group
D hazardous locations
• Designed to pump
contaminated water, with
a wide range of pollutants
listed under the CSA
listings
• Intrinsically safe
control panel included
• Durable motor will
deliver many years
of reliable service
maximum heat dissipation
and constant bearing
lubrication
• Recessed impeller
reduces radial bearing
loads, increasing bearing
life
• High-torque capacitor
start, single-phase motor
for assured starting under
heavy load
• Seal leak probes warn
of seal leak condition
• On-winding heat sensors
protect motor from
overheating and prevent
costly motor damage
10
M9015SSE
SPECIFICATIONS
SPECIFICATIONS
SUMP PUMPS
GOO D
BETTER
BEST
PSB1822
1/4 HP Sump Basin Package
SPECIFICATIONS
SPECIFICATIONS
SPECIFICATIONS
32 GPM
121 LPM
Shut-off head
22’
6.7 m
Operation: On
Off
9.5”
2.5”
241 mm
63 mm
Solids handling
1/4”
6.35 mm
Liquids handling
drain water
30
Shaft seal
carbon & ceramic
Housing
plastic
Power cord
10’, SJTW, SJTW-A
Discharge, NPT
1-1/2”
75
90
105
120
7
6
SP25
18
A1
16
1/4
14
5
HP
4
12
10
3
8
2
6
4
1
2
0
5
up to 60°C
1/4 HP, 115V, 1Ø, 60Hz
60
20
0
45
10
15
20
25
30
Pump Only
Sump basin packages
featuring 1/4 HP pump are
available while supplies last
FEATURES
• 1/4 HP
• Fully assembled – check
valve includes
• Injection-molded
structural foam provides
the highest
quality construction for
uniform wall thickness
and strength
• Proprietary “flush mount”
design for easy shipping
and storage – allows for
pallet stacking for sump
new or existing installations
Capacities
15
22
TOTAL HEAD IN FEET
Applications
0
Basin Features:
• Radon proof – radon
approved basin and cover
for radon prevention
structural foam
(polyethylene)
20-gallon capacity basin;
standard 18” x 22” size
structural foam
(polyethylene) lid;
gas-tight single-piece
design with seal
• 4” snap-in type hub
adapter with stainless
steel clamp; fits 4” DWV
SCH. 40 plastic pipe
• 1-1/2” NPT threaded
discharge and 2” NPT
vent flange (easily converts
to 3”); comes with gastight cord grommet
• Sump pump check
valve fits 1-1/2” black,
galvanized, and DWV SCH.
40 pipe
11
M9155SSE
SUMP PUMPS
GOO D
BETTER
BEST
ED-25
1/4 HP Sink Pump System includes SP25V1 pump and 5 gallon tank
SPECIFICATIONS
SPECIFICATIONS
32 GPM
121 LPM
Shut-off head
22’
6.7 m
Operation: On
Off
9.5”
2.5”
241 mm
63 mm
Solids handling
1/4”
6.35 mm
Liquids handling
drain water
up to 140°F
1/4 HP, 115V, 6.5A, 1Ø, 60Hz
Shaft seal
carbon & ceramic
Housing
plastic
Power cord
10’ (3 m), SJTW, SJTW-A
Discharge, NPT
1-1/2”
30
45
60
75
90
105
120
7
20
6
ED2
18
51
16
14
/4 H
5
P
4
12
10
3
8
2
6
4
1
2
0
0
5
10
15
20
25
30
up to 60°C
Pump Only
Sump basin packages
featuring 1/4 HP pump are
available while supplies last
FEATURES
• Specially designed
for many household jobs
• Pumps water from laundry
trays, washing machines,
wet bars, water softeners,
dehumidifiers, etc.
• High-capacity 1/4 HP
pump
• Oil-filled for maximum
heat dissipation and
constant lubrication
reset
• Fully assembled
• Includes discharge
pipe inside basin
• Installs above
floor – no need for sump
12
M9017SSE
Capacities
15
22
laundry trays, washing
machines, wet bars, water
softeners, dehumidifiers, etc.
TOTAL HEAD IN FEET
Applications
0
SUMP PUMPS
GOO D
BETTER
BEST
ED33 Series
1/3 HP Sink Pump System includes MDC33VI pump and 6 gallon tank
SPECIFICATIONS
SPECIFICATIONS
SPECIFICATIONS
25
48 GPM
182 LPM
Shut-off head
24’
7.3 m
Operation: On
Off
6 1/2”
2”
165 mm
50 mm
Solids handling
1/2”
12.7 mm
Liquids handling
drainage effluent
Intermittent liquid temp 130°F
50
75
100
125
150
175
20
6
ED3
5
3 1/
15
3H
P
4
10
3
2
5
1
0
10
20
30
40
50
0
54°C
1/3 HP, 115V, 9.8 FLA, 1Ø, 60Hz
Acceptable pH range
5-9
Shaft seal
carbon & ceramic
Housing
cast iron
Power cord
10’ (3 m), grounded SJTW,
SJTW-A
Discharge, NPT
1-1/2”
Pump Only
FEATURES
• 1/3 HP
• Pre-packaged sink/pump
system is ready for quick
application
Basin Features:
• High-impact engineered
resin, exterior hardware
and stainless steel
construction
• 1-1/2” (38 mm)
NPT discharge
• Carbon/ceramic shaft seal
• Piggyback-style float for
automatic or manual
operation
• Octagonal shape,
compact size, 6-gallon
usable capacity
• Easily replaceable power
cord with optional
lengths available
• Molded reusable PNC
gasket lid seal
• Basin dimensions are
15-1/16” W x 13 3/8” H
(11-9/16” from floor
to center of inlet)
13
M9018SSE
Capacities
25
7
laundry trays, wet bars,
beautician or utility sinks,
dehumidifier/air-conditioning
units
TOTAL HEAD IN FEET
Applications
0
GOO D
BETTER
BEST
MBSP
12 Volt Battery Standby Pump System
SPECIFICATIONS
SPECIFICATIONS
SPECIFICATIONS
10
16
Capacities
30 GPM
70
90
110
130
4.5
14
114 LPM
4.88 m
12
Shut-off head
16’
Liquids handling
sump drain water
up to 77°F
Motor
12V DC, 9A
2
Charger
plug-in type wall-mounted
transformer; input - 120V AC,
60Hz, 15W; output - 12V AC,
60Hz, 2A
0
Check valve
dual check valves provided
Housing
thermoplastic
up to 25°C
3.5
MBS
P1
10
8
2V
DC
2.5
6
1.5
4
.5
0
5
10
15
20
25
30
35
FEATURES
• Protects home if
AC-powered pump fails
• Backs up residential sump
pump automatically
during power outage or
pump failure (primary
pump and piping not
included)
• Reliable operation
• Continuous
self-charging system
• Solid-state controller
monitors battery charge
and pump operation
• Alarm sounds when
standby pump activates
• Controller includes
connectors for pump,
charger, float switch
and battery*
• Area light lights up dark,
powerless work area
• Works with flooded and
sealed AGM deep cycle
lead-acid battery
• Re-settable circuit breaker
eliminates the need for
a fuse
• 2A 5-stage charger
* Deep cycle marine-type battery (Group 24)
recommended — not included with MBSP system
14
M9019SSE
emergency dewatering
TOTAL HEAD IN FEET
Applications
50
30
GOO D
BETTER
BEST
MBSP-Plus Series
12 Volt Battery Standby Pump System
SPECIFICATIONS
SPECIFICATIONS
SPECIFICATIONS
Capacities
25
50
75
100
125
150
175
6
emergency dewatering
2700 GPH
5
TOTAL HEAD IN FEET
Applications
0
10,220 LPH
Shut-off head
18’
Liquids handling
sump drain water
up to 77°F
Motor
12V DC, 18A
Charger
fully automatic, computerized
monitoring, control and alarm
system; input - 115V AC,
60Hz; output - 12V AC, 8A
(5 stages)
Check valve
included
Housing
thermoplastic
up to 25°C
15
MBS
4
P-P
10
LUS
3
2
5
1
0
12.5
25
37.5
50
0
FEATURES
• 2700 GPH (10,220 LPH), 8A
5-stage charging system
• Thermoplastic pump
with steel case charger
enclosure
• 1-1/4” (32 mm) NPT
threaded discharge;
adapts to 1-1/4” (32 mm)
and 1-1/2” (38 mm) NPT
• High volume ideal for
active sump pits
• 8A multi-stage charging
system (UL/CUL approved)
with steel enclosure
provides the strongest
battery charge
• Plug-in style connectors
for quick and easy
installation
• Audio and visual alarms
keep you informed of
status at all times
• Check valve and battery
case included
• Fits most new and existing
sump pits
15
M9020SSE
20
EFFLUENT PUMPS
GOO D
BETTER
BEST
S40HT Series
High Temperature 1/3 HP Effluent Pump
SPECIFICATIONS
SPECIFICATIONS
SPECIFICATIONS
Applications
boiler blow-down pits,
condensate pits,
hot water sumps
Shut-off head
21’
6.4 m
Capacities
45 GPM
170 LPM
Operation
(S40HT-11P): On
Off
13.5”
4.5”
343 mm
114 mm
Operation
manual or automatic
Solids handling
3/4”
Liquids handling
high temperature liquids
Intermittent liquid temp.
S40HT-11P
S40HT-11
up to 194°F
up to 200°F
7A or equal, Buna-N elastomers, carbon and ceramic
sealing faces, stainless steel
metal parts
Bearings
lower ball, upper sleeve type,
oil lubricated
Power cord
20’, 16/3, SJOOW-A/SJOW
Discharge, NPT
1-1/2”
Min. sump diameter
Simplex:
Duplex:
18”
30”
457.2 mm
762 mm
24
6-9
Housing/volute case
cast iron
Impeller
cast iron
Exterior hardware
stainless steel
25
50
75
100
125
150
175
7
20
1/3 HP, oil-filled, thermal
overload protection, 115V,
12A, 1Ø, 60Hz, 1550 RPM
Acceptable pH range
0
S40HT
16
PERFORMANCE
@ 70°F WATER
TEMPERATURE
6
5
PERFORMANCE
@ 194°F WATER
TEMPERATURE
12
4
3
8
2
4
1
0
0
10
20
30
40
50
FEATURES
• All cast-iron housing,
volute case, and impeller
resists the most extreme
corrosive environments
• Rugged-built, oil-filled
motor for continuous
bearing lubrication and
• Heat sensor overload
reset when motor cools
to a safe operating
temperature
• Lower ball bearing
eliminates sleeve bearing
wear and reduces
motor wear
• Non-clog vortex style
impeller, ejector vanes
for seal protection
• Stainless steel hardware
allows easy disassembly
after extended service
• Oil and water resistant
cord design prevents oil
loss from – and moisture
protection for – motor
• Bearings and mechanical
seal are permanently
lubricated for long life
• Easy to service heavy-duty
lift-out ring
16
M9013SSE
up to 90°C
up to 93°C
TOTAL HEAD IN FEET
19 mm
Mechanical seal type
EFFLUENT PUMPS
GOO D
BETTER
BEST
S50HT Series
1/2 HP High Capacity Submersible Effluent Pump
SPECIFICATIONS
SPECIFICATIONS
SPECIFICATIONS
100 GPM
378 LPM
Shut-off head
50’
15.2 m
Max. spherical solids
3/4”
19 mm
Liquids handling
domestic effluent and drain water
Max. liquid temp.
200°F
1/2 HP, 3450 RPM, PSC
with thermal overload,
115V, 12 FLA, 1ø, 60Hz
Acceptable pH range
5-9
Specific gravity
.9–1.1
Viscosity
28–35 SSU
Discharge, NPT
2”
Housing
cast iron
Min. sump diameter
Simplex:
Duplex:
24”
36”
Power cord
20’, 16/4, SOOW, SOOW-A
93°C
200
300
400
45
S50 HT – 1/2 HP PERFORMANCE
@70°F WATER
TEMPERATURE
30
12
8
S50 HT – 1/2 HP PERFORMANCE
@200°F WATER
TEMPERATURE
15
4
0
30
60
90
120
0
609.6 mm
914.4 mm
FEATURES
• 1/2 HP
• Class 30 cast iron
construction
• 2” (50.8 mm)
NPT discharge
• Silicon carbide shaft seals
100
PW217-280 Control
Panel Required
(sold separately)
• Ball-bearing construction
for long life
• 600V jacketed lead
for added durability
• Easily replaceable
power cord with optional
lengths available
17
M9014SSE
Capacities
0
16
high-capacity sump, effluent,
boiler blow-down
TOTAL HEAD IN FEET
Applications
60
EFFLUENT PUMPS
GOO D
BETTER
BEST
ME3 Series
1/3 HP High Head (ME3H) and High Flow (ME3F)
Submersible Effluent Pumps
SPECIFICATIONS
SPECIFICATIONS
SPECIFICATIONS
effluent removal, sump drainage, water transfer, flood
control
36 GPM
66 GPM
Shut-off head
ME3H:
ME3F:
35’
31’
10.7 m
9.5 m
3/4”
19 mm
Liquids handling
domestic effluent and drain
water
Intermittent liquid temp. up to 140°F
ME3
H1
35
136 LPM
249 LPM
50
/3
30
100
150
200
250
300
350
HP
12
10
ME3
25
8
F1
20
/3 H
P
6
15
4
10
2
5
0
0
10
20
30
40
50
60
70
80
90
Capacities
ME3H:
ME3F:
40
TOTAL HEAD IN FEET
Applications
0
0
100
up to 60°C
1/3 HP, 1550 RPM, shaded pole,
oil-filled, 115V, 12A, 1ø, 60Hz,
230V, 6A, 1ø, 60Hz
Acceptable pH range
6-9
Specific gravity
.9–1.1
Viscosity
28 –35 SSU
Discharge, NPT
1-1/2”
Housing
heavy cast iron
Min. sump diameter
Simplex:
Duplex:
24”
36”
Power cord
20’, 16/3, SJTW
609.6 mm
914.4 mm
ME3F
ME3H
FEATURES
• Durable motor delivers
years of reliable service
and continuous bearing
lubrication
• Overload protected,
shaded pole motor
eliminates starting
switches and relays which
are prone to fail
• Automatic pump models
• Heavy cast iron motor
can be operated manually
housing and volute case
by unplugging piggyback
dissipate heat, allow motor
switch and plugging pump
to run cooler for extended
directly into outlet
life
• Passes full 3/4” solids
• Engineered for
maintenance-free
• CSA Listed
operation
• Field-tested, wide-angle,
mercury-free mechanical
float switch for maximum
drawdown (automatic
piggyback models only)
18
M9021SSE
EFFLUENT PUMPS
GOO D
BETTER
BEST
ME40 Series
4/10 HP Effluent and Drain Water Pump
SPECIFICATIONS
SPECIFICATIONS
effluent removal, sump
drainage, water transfer,
flood control
Capacities
80 GPM
303 LPM
Shut-off head
32’
9.75 m
3/4”
19 mm
Liquids handling
water
up to 140°F
4/10 HP: 1650 RPM, PSC,
oil-filled; 115V, 12A, 1ø, 60Hz;
230V, 6A, 1ø, 60Hz
Acceptable pH range
5-9
Specific gravity
.9–1.1
Viscosity
28–35 SSU
Discharge, NPT
1-1/2”
Housing
cast iron
Min. sump diameter
Simplex:
Duplex:
24”
36”
Power cord
20’, 16/3, SJTW
50
100
150
200
250
300
350
35
TOTAL HEAD IN FEET
Applications
0
10
30
8
25
ME4
0 4/
20
10 H
6
P
15
4
10
2
5
0
0
up to 60°C
12
10
20
30
40
50
60
70
80
90
0
100
NEW! NOW WITH
CAST IRON IMPELLER
FOR ADDED DURABILITY
609.6 mm
914.4 mm
FEATURES
• Two-vane cast iron
impeller design provides
maximum dosing
efficiency
• Enclosed design for
high- efficiency pumping
• Eliminates possibility
of jamming between
impeller and volute
deliver many years
of reliable service
lubrication
• Positive sealing,
quickconnect float
and switch cords make
replacement simple
if service is ever necessary
float switch provides
maximum drawdown
(automatic models only)
• Lower ball bearing and
heavy-duty, type 6 seal
for added pump life
• CSA Listed
19
M9022SSE
40
EFFLUENT PUMPS
GOO D
BETTER
BEST
ME40-CI Series
Cast Iron Submersible Effluent Pump
SPECIFICATIONS
SPECIFICATIONS
0
50
100
150
200
250
40
drainage, water transfer, and
flood control.
65 gpm
246 lpm
Shut-off head
40’
12.19 m
3/4”
19 mm
Liquids handling
water
up to 130°F
4/10 HP, 3450 RPM, 115 Volts,
60 Hz., oil-filled
Acceptable pH range
6-9
Specific gravity
.9-1.1
Viscosity
28-35 S S U
Discharge, NPT
2”
Housing
cast iron
Min. sump diameter
Simplex:
Duplex:
24”
36”
Power cord
0-CI
8
25
20
6
15
4
10
2
5
0
up to 55°C
0
0
10
20
30
40
50
609.6 mm
914.4 mm
20’ water resistant 18-3
SJTW-A/SJTW with integrally
grounded 3-prong plug, single
phase.
FEATURES
• Bearings and mechanical
seal permanently
lubricated for long life.
• Vortex style impeller,
pump out vanes for seal
protection.
• Built-in thermal overload
reset.
• Cord design easily
replacable with optional
lengths available.
10
ME4
30
• Heavy-duty lift out ring,
field serviceable.
• 3/4” spherical solids
handling capability.
• Stainless steel hardware
allows easy disassembly
after extended service.
• Standard controls
available for automatic
operation.
20
60
70
Capacities
TOTAL HEAD IN FEET
Applications
12
35
EFFLUENT PUMPS
GOO D
BETTER
BEST
ME45 Series
1/2 HP Effluent and Drain Water Pump
control
Capacities
87 GPM
329 LPM
Shut-off head
44’
13.41 m
3/4”
19 mm
Liquids handling
water
up to 140°F
1/2 HP: 3450 RPM, PSC,
oil-filled; 115V, 8.6A, 1ø, 60Hz;
230V, 4.3A, 1ø, 60Hz
Acceptable pH range
5-9
Specific gravity
.9–1.1
Viscosity
28 –35 SSU
Discharge, NPT
ME40:
ME45:
1-1/2”
2”
Housing
cast iron
Min. sump diameter
Simplex:
Duplex:
24”
36”
Power cord
20’, 16/3, SJTW
TOTAL HEAD IN FEET
Applications
50
0
50
40
100
150
250
300
350
5 1/
2H
P
9
20
6
10
3
0
0
up to 60°C
15
12
ME4
30
200
10
20
30
40
50
60
70
80
90
0
100
609.6 mm
914.4 mm
FEATURES
• Two-vane cast iron
impeller design provides
maximum dosing
efficiency
high- efficiency pumping
of jamming between
impeller and volute
• Durable motor will deliver
many years of reliable
service
lubrication
• Positive sealing, quickconnect float and switch
cords make replacement
simple if service is ever
necessary
float switch provides
maximum drawdown
(automatic models only)
• Lower ball bearing and
heavy-duty, type 6 seal
for added pump life
• CSA Listed
21
M9185SSE
SPECIFICATIONS
SPECIFICATIONS
SPECIFICATIONS
EFFLUENT PUMPS
GOO D
BETTER
BEST
ME Series
1/2 through 1-1/2 HP Effluent Pumps
SPECIFICATIONS
SPECIFICATIONS
Capacities
120 GPM
454 LPM
Shut-off head
95’
28.9 mm
3/4”
Liquids handling
water
Acceptable pH range
6-9
Specific gravity
.9–1.1
Viscosity
28–35 SSU
Discharge, NPT
2”
Housing
cast iron
Min. sump diameter
Simplex:
Duplex:
24”
36”
Power cord
10’
150
200
250
300
350
400
450
28
24
ME15
0 11/
ME10 2 HP
01
HP
ME7
5 3/
4 HP
ME50
1/2
HP
70
60
50
40
30
20
20
16
12
8
4
10
0
up to 60°C
1/2 HP, 115V, 1ø, 1/2 to
1-1/2 HP, 230V, 1ø, 208/230/
460/575V, 3ø, oil-filled,
permanent split capacitor type,
1ø, 3450 RPM, 60Hz
100
80
19 mm
50
90
drainage, water transfer,
flood control
TOTAL HEAD IN FEET
Applications
0
0
10
20
30
40
50
60
70
80
90
100
110
120
130
100
0
609.6 mm
914.4 mm
FEATURES
• Ideal for use in mound
and trench pressure
distribution systems
• High-efficiency,
two-vane, enclosed
impeller provides ideal
performance for
efficient dosing
• Impeller passes full
3/4” solids
• Enclosed impeller design
eliminates the possibility of jamming or corrosion
between impeller and
volute
deliver many years
of reliable service
lubrication
• High-torque, permanent
split capacitor (PSC),
single- phase motors;
no starting switches
or relays to wear out
• Optional seal leak probe
warns of seal leak
condition (dual seal
motors only); helps
prevent costly motor
damage
22
• Motors have a winding
current and temperaturesensitive overload (single
phase only)
• Volute seal ring is
replaceable; restores
pump to original
performance if wear
should occur
• Motor is held in place by
4 screws; easily removed if
service is ever needed
• CSA Listed
M9023SSE
EFFLUENT PUMPS
GOO D
BETTER
BEST
P50/P100 Series
1/2 and 1 HP Effluent ST.E.P. Pumps
SPECIFICATIONS
SPECIFICATIONS
SPECIFICATIONS
25
50
75
100
125
150
175
200
225
140
Capacities
60 GPM
227 LPM
Shut-off head
124’
37.8 m
3/4”
19 mm
Liquids handling
water
1/2 HP, 115V or 230V, 1ø;
1 HP, 230V, 1ø, oil-filled,
permanent split capacitor type,
3450 RPM, 60Hz
Acceptable pH range
6-9
Specific gravity
.9–1.1
Viscosity
28 –35 SSU
Discharge, NPT
1-1/2”
Housing
cast iron
Min. sump diameter
Simplex:
Duplex:
24”
36”
Power cord
20’, 14/3 SJOW, SJOW-A
36
P102 1
HP
100
32
28
80
24
P51 & P
52 1/2
HP
60
20
16
12
40
8
20
0
up to 60°C
40
120
control
TOTAL HEAD IN FEET
Applications
4
0
5
10
15
20
25
30
35
40
45
50
55
60
0
609.6 mm
914.4 mm
FEATURES
• P Series effluent pumps
are designed for years
of maintenance-free
operation
• Single-vane, enclosed
impeller provides steep,
non-overloading
performance curve for
pressure collection and
ST.E.P. systems;
out-performs most
pumps in its class
• Enclosed impeller
eliminates the possibility
of jamming or corrosion
between impeller and
volute
• Passes 3/4” spherical
solids
deliver many years
of reliable service
lubrication
single-phase motors; no
starting switches or relays
to wear out
• Double tandem seal
configuration for extra
motor protection,
tough effluent pumping
applications
• Optional seal leak
probes warn of seal leak
condition; helps prevent
costly motor damage
23
• On-winding current and
temperature-sensitive
overload to protect against
costly burnout
• Volute seal ring is
replaceable; restores
pump to original
performance
if wear should occur
• Motor is held in place by
4 screws; easily removed
if service is ever needed
• CSA Listed
M9024SSE
EFFLUENT PUMPS
GOO D
BETTER
BEST
MD Series
1/2 HP On-site Effluent Pump
SPECIFICATIONS
SPECIFICATIONS
SPECIFICATIONS
25
0
75
50
200
100
on-site filtered effluent, cistern
22.9 – 68.6 m
.080”
2.0 mm
Liquids handling
filtered effluent
Max liquid temp.
86°F
Dry-wound, double ball bearing,
double-seal, thermal overload
protected, 115V, 1ø, 60Hz
150
75
20
30°C
Specific gravity
.9–1.1
Viscosity
28–35 SSU
Discharge, NPT
1-1/4”
Housing
stainless steel and composite
Power cord
10’
40
0
15
GP
M
30
1/2
HP
30
GPM
20
1/2
HP
0
45
60
3.0 m
300V, 2-wire with ground,
SJTW-A, SJTW
FEATURES
• 1/2 HP, 115V, single-phase
• Superior drawdown
capability to 4-1/2”
(114 mm) vs. 13-1/2”
(343 mm) on a standard
NEMA 4”
• 25% reduced amp-draw
9.5A vs. 12.7A on a
standard NEMA 4”
• Cooler and quieter
operation – eliminates
expensive “flow-inducer
sleeves”
• Stainless steel and
composite construction
• Exclusive dry-run
capability
• Enclosed and selflubricated shaft-bearing
resists wear from
abrasives
• Heavy 7/16” (12 mm)
positive drive 300 Series
stainless steel hexagonal
shaft
• Serviceable composite
intake screen – allows for
0.80” solids
24
M9026 SSE
75’– 225’
HP
Shut-off head
60
1/2
7.6 –132.5 LPM
GP M
2 – 35 GPM
225
10
Capacities
80
TOTAL HEAD IN FEET
Applications
300
EFFLUENT PUMPS
GOO D
BETTER
BEST
2NFL and J-BE Series
1/2 through 1-1/2 HP High Head Filtered Effluent Pumps
SPECIFICATIONS
SPECIFICATIONS
SPECIFICATIONS
Applications
on-site filtered effluent
Capacities
50 GPM
189 LPM
Shut-off head
480’
146.30 m
1/16”
1.6 mm
Liquids handling
filtered effluent
Max liquid temp.
122°F
1/2 HP, 115V, 1ø, 1/2 to 1-1/2 HP,
230V, 1ø, 60Hz, 3450 RPM
Specific gravity
.9–1.1
Viscosity
28 –35 SSU
Discharge NPT
8, 12, and 20 GPM:
25 and 35 GPM:
1-1/4”
2”
Housing
stainless steel
Power cord, jacketed, 10’
14/3, SOOW
30’
50’
100’
68°C
3.048 m
9.144 m
15.24 m
30.48 m
FEATURES
• Cost-effective wastewater systems
• High-pressure capacity
• Corrosion-resistant design for long life
• Dependable field proven motor
• Stainless steel construction
• Built-in overload protection
• Replaceable 10’, 30’, 50’ or 100’ jacketed power cord
• Hermetically sealed windings
• Continuous-duty rating
• Frequent cycling capabilities
• Powerful, yet lightweight
• Easy handling and installation
2NFL
J-BE
(Performance charts on following page)
25
M9027SSE
EFFLUENT PUMPS
GOO D
BETTER
BEST
2NFL and J-BE Performance
8 GPM – 2NFL
12 GPM – 2NFL
30
38
45
53
60
68
75
8
500
1 HP
150
400
3/4 HP
120
300
1/2 HP
90
200
60
100
30
0
2
4
6
8
10
12
14
16
18
23
34
45
57
68
80
102
120
3/4 HP
300
90
1/2 HP
200
60
100
30
0
2
114
3/4 HP
60
100
30
3
6
9
12
15
18
21
24
27
TOTAL HEAD IN FEET
90
1 HP
TOTAL HEAD IN FEET
19
120
1-1/2 HP
0
75
4
6
8
10
12
14
16
18
20
151
170
189
91
1/2 HP
0
68
25 GPM – J-BE
150
200
60
500
300
53
1 HP
400
45
150
400
0
20
20 GPM – 2NFL
23
38
500
11
30
76
95
114
133
150
400
120
1-1/2 HP
300
90
1 HP
200
0
30
57
500
60
1/2 HP
100
38
0
5
10
30
15
20
25
30
35
40
45
0
15
23
TOTAL HEAD IN FEET
15
TOTAL HEAD IN FEET
8
50
35 GPM – J-BE
19
38
57
76
95
114
133
151
170
189
75
200
60
1-1/2 HP
150
45
1 HP
100
30
50
15
0
0
5
10
15
20
25
30
35
40
45
TOTAL HEAD IN FEET
250
50
26
M9027SSE
SEWAGE PUMPS
GOO D
BETTER
BEST
SRM4
4/10 HP Sewage Pump
SPECIFICATIONS
SPECIFICATIONS
SPECIFICATIONS
40
24
Capacities
95 GPM
360 LPM
Shut-off head
19’
5.8 m
Solids handling
2”
50.8 mm
Liquids handling
septic effluent and sewage
up to 140°F
4/10 HP, PSC, 115V, 12A, 1Ø,
60Hz
Acceptable pH range
5-9
Discharge, NPT
2”
Housing
heavy cast iron
Power cord
10’
(20’ optional)
Impeller
recessed, thermoplastic
Volute case
cast iron
Shaft seal
120
160
200
240
280
320
360
7
20
6
5
16
SRM4
12
4/10
4
HP
3
8
2
4
up to 60°C
0
1
0
10
20
30
40
50
60
70
80
90
3.0 m
(6.1 m)
FEATURES
• Power for versatile applications
• Residential septic tank sewage
• Large sumps
• Long-lasting performance
• Oil-filled motor for maximum heat dissipation
and continuous bearing lubrication
• Recessed vortex impeller for free flow of liquids,
solids up to 2” diameter
• Rotary shaft seal has carbon and ceramic faces
for positive seal
• Thermal overload protection with automatic reset
• CSA Listed
27
M9029SSE
sewage, high-capacity sump,
effluent
TOTAL HEAD IN FEET
Applications
80
SEWAGE PUMPS
GOO D
BETTER
BEST
CMV5
1/2 HP Residential Sewage Pump
SPECIFICATIONS
SPECIFICATIONS
SPECIFICATIONS
effluent
Capacities
95 GPM
Shut-off head
18’ shut-off:
19’ shut-off:
5.5 m
5.8 m
360 LPM
Solids handling
2”
Liquids handling
raw sewage, effluent
and drain water
50.8 mm
up to 140°F
1/2 HP, PSC, 1625 RPM, 115V,
12A, 1Ø, 60Hz
Acceptable pH range
6-9
Discharge NPT
2”
Housing
cast iron
Power cord
20’, 16/3, SJTW 6.1 m
Impeller
Volute case
thermoplastic
Shaft seal
Min. sump diameter
Simplex:
Duplex:
18”
30”
50
100
150
200
250
300
350
6
5
TOTAL HEAD IN FEET
Applications
0
15
4
CMV
51
10
3
/2 H
P
2
5
1
0
0
10
20
30
40
50
60
70
80
90
0
100
up to 60°C
457 mm
762 mm
FEATURES
• Engineered for many
years of maintenance-free
operation
• Wide-angle, mercury-free
mechanical float switch
for maximum drawdown
operates completely out
of volute and provides free
flow through passage for
solids and liquids
• Recessed vortex
impeller provides minimal
deliver many years
radial loading for long
of reliable service
bearing life
• Oil-filled motor
• CSA Listed
for maximum heat
dissipation and continuous
bearing lubrication
28
M9030SSE
20
SEWAGE PUMPS
GOO D
BETTER
BEST
MW50
1/2 HP Residential and Light Commercial Sewage Pump
SPECIFICATIONS
SPECIFICATIONS
SPECIFICATIONS
effluent
Capacities
135 GPM
510 LPM
Shut-off head
27’
8.23 m
Solids handling
2”
50.8 mm
Liquids handling
domestic sewage & drain
water
up to 140°F
1/2 HP, 1625 RPM, PSC (1Ø),
oil-filled, 115V, 9A, 1Ø, 60Hz;
230V, 4.5A, 1Ø, 60Hz
Acceptable pH range
5-9
Discharge, NPT
2”
Housing
class 30 cast iron
Power cord
20’, 16/3, SJTW 6.1 m
Impeller
thermoplastic
Volute case
cast iron
Shaft seal
type 6, carbon & ceramic
Min. sump diameter
Simplex:
Duplex:
24”
36”
100
200
300
400
500
25
TOTAL HEAD IN FEET
Applications
0
8
20
MW5
6
0 1/
2 HP
15
4
10
2
5
0
up to 60°C
10
0
20
40
60
80
100
120
0
140
50.8 mm
609.6 mm
914.4 mm
FEATURES
• Two-vane impeller design
provides maximum pump
efficiency
high-efficiency pumping
of jamming between
impeller and volute
• Passes full 2” solids
• Original performance can
be restored if wear occurs
by replacing volute seal
ring
deliver many years
of reliable service
lubrication
split capacitor (PSC)
motors; no starting
switches or relays to wear
out
mercury-free piggyback
provides maximum
drawdown (automatic
models only)
• Long, flexible type 6 seal
provides high-pressure
sealing with improved seal
face protection by location
• Lower ball bearing
eliminates sleeve bearing
wear and significantly
reduces motor wear
29
• Low-amp draw from the
efficient PSC motor
means less heat build-up
• CSA Listed
M9031SSE
30
SEWAGE PUMPS
GOO D
BETTER
BEST
MW Series
2" Solids Handling Heavy-Duty Residential and Commercial Sewage Pumps
Available with Single or Double Seals
effluent
Capacities
165 GPM
624 LPM
Shut-off head
70’
21.3 m
Solids handling
2”
50.8 mm
Liquids handling
domestic sewage & drain
water
up to 140°F
1/2 to 2 HP, 208/230V, 1Ø;
208/230/460/575V, 3Ø, oilfilled, permanent split, capacitor type, 1Ø, 3450 RPM, 60Hz
Acceptable pH range
5-9
Discharge, NPT
2”
Housing
cast iron
Power cord
10’
Impeller
ductile iron
Volute case
class 30 cast iron
Shaft seal
Min. sump diameter
Simplex:
Duplex:
24”
36”
0
100
200
300
400
500
600
70
TOTAL HEAD IN FEET
Applications
80
20
60
MW150
50
MW200
1-1/2 H 2 HP
P
15
MW100
1 HP
MWH50
1/2 HP
40
30
10
20
5
10
up to 60°C
0
0
20
40
60
80
100
120
140
160
0
180
609.6 mm
914.4 mm
FEATURES
• High head performance
for demanding
applications
• High-efficiency, two-vane,
enclosed impeller for
high-efficiency pumping
of jamming between
impeller and volute
• Original performance can
be restored if wear occurs
by replacing volute seal
ring
deliver many years
of reliable service
lubrication
split capacitor (PSC)
single-phase motors;
no starting switches
or relays to wear out
• CSA Listed
30
M9032SSE
SPECIFICATIONS
SPECIFICATIONS
SPECIFICATIONS
SEWAGE PUMPS
GOO D
BETTER
BEST
WHR Series
2" Solids Handling Heavy-Duty Residential and Commercial Sewage Pumps
Available with Single or Double Seals
SPECIFICATIONS
SPECIFICATIONS
SPECIFICATIONS
Capacities
178 GPM
673.8 LPM
Shut-off head
33’
10.1 m
Solids handling
2”
50.8 mm
Liquids handling
drain water and domestic
sewage
up to 140°F
1/2 HP, 115V, 1Ø, 60Hz, PSC;
1/2, 3/4, 1 HP, 230V, 1Ø, 60 Hz
PSC; 200/230/460/575V, 3Ø,
60Hz
Acceptable pH range
5-9
Discharge, NPT
2”
3”
Housing
cast iron
Power cord
WHR–SJOW/SJOW-A
20’, 16/3, 1Ø; 20’, 16/4, 3Ø
WHR-DS – 20’, 14/4, 1Ø
20’, 14/3, 1Ø, L/D; 20’, 16/4, 3Ø,
L/D
Impeller
cast iron, vortex
Volute case
cast iron
Shaft seal
single type 21, carbon/ceramic, double tandem carbon/ceramic
Min. sump diameter
Simplex:
Duplex:
24”
30”
up to 60°C
304
380
456
532
608
684
9.6
1 HP
& WH
R10-D
WHR7
S
3/4 H
P&
WHR
WHR5
7-DS
1/2 H
P&
WHR
5-DS
28
228
24
20
16
8.4
7.2
6.0
4.8
12
3.6
8
2.4
4
1.2
0
0
20
40
60
80
100
120
140
160
180
609.6 mm
762 mm
FEATURES
• Power range meets many
applications
• Domestic wastewater
and septic systems
• Light commercial sewage
• High-capacity fluid
transfer
• Durable motor for
long-lasting performance
• 1/2, 3/4 and 1 HP models
• Oil-filled for cooler
operation and constant
bearing lubrication
• Single-phase PSC
motors eliminate starting
switches
increases bearing life
reset
• Double seal models with
seal leak detector are not
CSA Listed
31
M9033SSE
domestic wastewater
and septic systems
152
WHR10
32
TOTAL HEAD IN FEET
Applications
76
SEWAGE PUMPS
GOO D
WHR5H-WHR20H Series
domestic wastewater
and septic systems
Capacities
218 GPM
825 LPM
Shut-off head
70’
20.9 m
Solids handling
2”
50.8 mm
Liquids handling
raw sewage and sewage
effluent
up to 140°F
1/2, 1, 1-1/2 & 2 HP, 3450 RPM,
200/230V, 1Ø, 60 Hz, PSC;
200/230/460V, 3Ø, 60Hz
Acceptable pH range
6-9
Discharge NPT
2”
3”
Housing
cast iron
Power cord
20’, 16/3,
SJOW/
SJOW-A, 1Ø
20’, 16/4,
SJOW/
SJOW-A, 3Ø
200
300
400
500
600
700
800
900
WHR2
70
0H 2
HP
WHR
60
20
15H
1-1/
2 HP
WHR1
0H 1
WHR5
H 1/2 HP
HP
50
40
15
10
30
20
5
10
up to 60°C
0
0
20
40
60
80
100
120
140
160
180
200
220
240
50.8 mm
76.2 mm
6.1 m
6.1 m
Impeller
ductile iron, vortex
Volute case
cast iron
Shaft seal
Min. sump diameter
Simplex:
Duplex:
24”
30”
609.6 mm
762 mm
FEATURES
• Higher heads for
demanding applications
• Domestic wastewater
and septic systems
• Light commercial sewage
• High-capacity fluid
transfer
• 1/2, 1, 1-1/2
and 2 HP models
• Oil-filled for cooler
operation and constant
bearing lubrication
• Single-phase PSC
motors eliminate starting
switches
reduces radial loads and
increases bearing life
reset
• CSA Listed
32
M9034SSE
100
TOTAL HEAD IN FEET
Applications
BEST
Impro
Performved
ance
2" Solids Handling Residential and Commercial Sewage and Effluent Pumps
SPECIFICATIONS
SPECIFICATIONS
SPECIFICATIONS
BETTER
SEWAGE PUMPS
GOO D
BETTER
BEST
SR1830
4/10 HP Packaged Simplex Sewage System
SPECIFICATIONS
SPECIFICATIONS
40
24
Capacities
95 GPM
360 LPM
Shut-off head
19’
5.8 m
Solids handling
2”
50.8 mm
Liquids handling
4/10 HP, shaded pole,
115V, 12A, 1Ø, 60Hz
Acceptable pH range
5-9
Discharge NPT
2”
Housing
heavy cast iron
Power cord
10’
(20’ optional)
Impeller
Volute case
cast iron
Shaft seal
160
200
240
280
320
360
7
20
6
5
16
SRM4
12
4/10
4
HP
3
8
2
4
up to 60°C
120
0
1
0
10
20
30
40
50
60
70
80
90
3.0 m
(6.1 m)
Pump Only
FEATURES
• Complete package
for versatile applications
• Residential septic
tank sewage
• Large sumps
• High-quality system
includes SRM4AIC
sewage pump
• 4/10 HP, 115V, 12A, 1Ø,
60Hz motor
• 2” diameter discharge
lubrication
for free flow of solids up
to 2” diameter
• Rotary shaft seal has carbon and ceramic faces for
positive seal
protection with
automatic reset
• CSA Listed
Basin:
• 18” x 30” structural
foam construction
• 30-gallon capacity
• 4” plastic slip type
or cast iron inlet hub
Sealed Cover:
• 18” solid structural foam
cover with 2” discharge
flange, vent flange suitable for 2” or 3” vent, or
split steel with 2” or 3”
vent
33
Check Valve:
• 2” full swing
Fully Assembled:
• Includes discharge pipe
inside basin
• Available in IAPMO
approved models
M9036SSE
residential septic tank sewage
and large sumps
TOTAL HEAD IN FEET
Applications
80
SEWAGE PUMPS
GOO D
BETTER
BEST
CMV1830
1/2 HP Packaged Sewage Ejector System
SPECIFICATIONS
SPECIFICATIONS
SPECIFICATIONS
residential septic tank, sewage
and large sumps
Capacities
95 GPM
Shut-off head
18’ shut-off:
19’ shut-off:
5.5 m
5.8 m
360 LPM
Solids handling
2”
Liquids handling
and drain water
50.8 mm
up to 140°F
1/2 HP, PSC, 1625 RPM, 115V,
12A, 1Ø, 60Hz
Acceptable pH range
6-9
Discharge, NPT
2”
50
100
150
200
250
300
350
6
5
TOTAL HEAD IN FEET
Applications
0
15
4
CMV
51
10
3
/2 H
P
2
5
1
0
0
10
20
30
40
50
60
70
80
90
0
100
up to 60°C
50.8 mm
Pump Only
FEATURES
• Complete package for
versatile applications
includes: CMV5A-11
sewage pump
• 1/2 HP, 115V, 12A,
1Ø, 60Hz
lubrication
provides minimal radial
loading for long bearing
life
• Wide-angle mercury-free
solids and liquids
Basin:
• 18” x 30” structural foam
construction
• 30-gallon capacity
• 4” plastic slip type
or cast iron inlet hub
Sealed Cover:
• 18” solid structural foam
cover with 2” discharge
flange, vent flange suitable
for 2” or 3” vent, or split
steel with 2” or 3” vent
Check Valve:
• 2” full swing
34
M9037SSE
20
SEWAGE PUMPS
GOO D
BETTER
BEST
SRM-BP
BasinPro 4/10 HP Packaged Sewage System
SPECIFICATIONS
SPECIFICATIONS
SPECIFICATIONS
40
24
Capacities
95 GPM
360 LPM
Shut-off head
19’
5.8 m
Solids handling
2”
50.8 mm
Liquids handling
4/10 HP, PSC, 115V, 12A, 1Ø,
60Hz
Acceptable pH range
5-9
Discharge NPT
2”
Housing
heavy cast iron
Power cord
20’, 16/3, SJTW
Impeller
Volute case
cast iron
Shaft seal
Basin size
24” x 24” structural foam
construction
160
200
240
280
320
360
7
20
6
5
16
SRM4
12
4/10
4
HP
3
8
2
4
up to 60°C
120
0
1
0
10
20
30
40
50
60
70
80
90
Pump Only
6.1 m
FEATURES
• Power for versatile
applications
• Residential septic
tank sewage
• Large sumps
• Long-lasting performance
lubrication
for free flow of liquids,
• Rotary shaft seal has
carbon and ceramic faces
for positive seal
reset
• Pump is pre-installed in
basin, with integral torque
stops to ensure stability
• Available with alarm,
optional
Basin:
• Stackable design allows
for compact inventory
• Integral 360° top grip for
easy lifting and handling
in tight spaces
foam construction;
45-gallon capacity
• Shallow 24” deep basin
reduces installation time
for digging pit
• Anti-floatation features
include concrete splash
lip and unique basin shape
to keep the system from
floating or becoming
“un-installed”
• Concrete-proof cover
insert protects the system
from damage during
rough-in and masonry
work
35
• E-Z Switch rod allows
removal of float switch
without disassembling
basin lid, or handling
pump or plumbing.
Additional clip
for secondary float
included; float sold
separately
M9161SSE
effluent
TOTAL HEAD IN FEET
Applications
80
SEWAGE PUMPS
GOO D
BETTER
BEST
CMV-BP
SPECIFICATIONS
SPECIFICATIONS
SPECIFICATIONS
effluent
Capacities
95 GPM
Shut-off head
18’ shut-off:
19’ shut-off:
5.5 m
5.8 m
360 LPM
Solids handling
2”
Liquids handling
and drain water
50.8 mm
1/2 HP, PSC, 1625 RPM, 115V,
12A, 1Ø, 60Hz
Acceptable pH range
6-9
Discharge, NPT
2”
Housing
cast iron
Power cord
20’, 16/3, SJTW
Impeller
Volute case
thermoplastic
Shaft seal
Basin size
construction
150
200
250
300
350
6
15
4
CMV
51
10
3
/2 H
P
2
5
1
0
up to 60°C
100
5
TOTAL HEAD IN FEET
Applications
50
0
10
20
30
40
50
60
70
80
90
0
100
Pump Only
6.1 m
FEATURES
• Engineered for many
years of maintenance-free
operation
• Wide-angle, mercury-free
solids and liquids
deliver many years
of reliable service
optional
lubrication
provides minimal radial
loading for long
bearing life
• Pump is pre-installed in
basin, with integral torque
stops to ensure stability
Basin:
easy lifting and handling in
tight spaces
foam construction;
45-gallon capacity
• Shallow 24”- deep basin
pump or plumbing.
Additional clip for
for digging pit
secondary float included;
float sold separately
include concrete splash lip
and unique basin shape to
keep the system from
“un-installed”
from damage during
work
36
M9162SSE
20
0
SEWAGE PUMPS
GOO D
BETTER
BEST
MW-BP
SPECIFICATIONS
SPECIFICATIONS
SPECIFICATIONS
effluent
Capacities
135 GPM
510 LPM
Shut-off head
27’ shut-off
8.23 m
Solids handling
2”
50.8 mm
Liquids handling
domestic sewage and drain
water
1/2 HP, 1625 RPM, PSC (1Ø),
oil-filled, 115V, 9A, 1Ø, 60Hz;
230V, 4.5A, 1Ø, 60Hz
Acceptable pH range
5-9
Discharge NPT
2”
Housing
cast iron
Power cord
20’, 16/3, SJTW
Impeller
thermoplastic
Volute case
class 30 cast iron
Shaft seal
Basin size
construction
200
300
400
500
10
8
20
MW5
6
0 1/
2 HP
15
4
10
2
5
0
up to 60°C
100
25
TOTAL HEAD IN FEET
Applications
0
0
20
40
60
80
100
120
0
140
Pump Only
6.1 m
FEATURES
• Fully assembled; pump is
pre-installed in basin, with
integral torque stops to
ensure stability
lubrication
for free flow of liquids,
optional
Basin:
easy lifting and handling
in tight spaces
construction; 45-gallon
capacity
• Shallow 24”- deep basin
for digging pit
include concrete splash lip
and unique basin shape to
keep the system from
pump or plumbing.
Additional clip
“un-installed”
for secondary float
included; float sold
separately
from damage during
work
37
M9178SSE
30
GRINDER PUMPS
GOO D
BETTER
BEST
MRG20
2 HP Single Seal Grinder Pump for Residential Applications
SPECIFICATIONS
SPECIFICATIONS
SPECIFICATIONS
50
140
45 GPM
170 LPM
Shut-off head
105’
Liquids handling
raw sewage
up to 140°F
up to 60°C
Winding
311ºF
155°C
2 HP, 3450 RPM, 1Ø - capacitor
start/run 230V; 60Hz, 15A
Acceptable pH range
6-9
Discharge NPT
1-1/4”
Sump diameter duplex
36”
Motor housing
cast iron
Power cord
20’
Impeller
eng. thermoplastic
Shaft seal
(Optional)
carbon & ceramic
tungsten carbide
Impeller
thermoplastic
Pump, motor shaft
stainless steel (416 SS)
Min. sump diameter
Simplex:
Duplex:
24”
36”
200
250
300
45
40
32 m
35
100
MRG20
80
30
2 HP
25
20
60
15
40
10
20
0
Capacities
sewage grinding, effluent
and wastewater removal
150
120
TOTAL HEAD IN FEET
Applications
100
5
0
10
20
30
40
50
60
70
80
914 mm
6.1 m
609.6 mm
914 mm
FEATURES
• The MRG20 Series
features a patented
cutter mechanism and
recessed impeller design
to effectively macerate
typical sewage solids into
fine slurry
deliver many years
of reliable service
lubrication
reduces radial bearing
loads and increases
bearing life
• High-torque capacitor
starts single-phase motor
for assured starting under
heavy load; no external
capacitor needed
• Heavy-duty 2 HP listed,
wide-angle float switch
• On-winding current and
temperature-sensitive
overload
• The MRG20 is designed
for easy maintenance
38
• Shredding ring and grinder
impeller are replaceable
without dismantling pump
or motor (440 Stainless
Steel, 58-60 Rockwell)
• 300 Series Stainless
Steel fasteners
• CSA Listed
M9039SSE
GRINDER PUMPS
GOO D
BETTER
BEST
MRG20 Grinder Pump Systems
Completely Pre-Engineered, Pre-Packaged, Pre-Assembled* Systems Ready for Installation
SPECIFICATIONS
SPECIFICATIONS
SPECIFICATIONS
Applications
package designed specifically
for use in residential or light
commercial sewer applications
with long discharge or high
static heads
Pump
Myers® model MRG20; 2 HP,
capacities to 42 GPM, shut-off
head 105 feet (see page 46 for
more detailed specifications)
Basin
fiberglass, available in 24”
diameter x 60”/72”/84”
or 96” depths
Cover
polypropylene
Guide rails
3/4” standard stainless steel pipe
Floats
18/2 SJOW, UL Listed for use
in sewage applications
Control panel
NEMA 4 rated disconnect panel
with alarm light
Junction box
NEMA 4X rated
Inlet fittings
4” compression style hub
(included)
Outlet
1-1/4” NPT
FEATURES
Inside Packages:
System Benefits:
Simplex 30” x 36”:
• Eliminate guesswork
of selecting components
• MRG20 2 HP grinder
pump 230V, 1Ø
• No mismatched or
improperly fitting parts
• 30” x 36” FRP basin
• Easy installation – installer • Weather-resistant
only has to excavate, secure, fiberglass cover
connect discharge lines,
locate and mount inlet hub, • Two SDR-35 inlet hubs
and Sch. 40 adapters
locate and mount panel,
• Wide-angle on/off float
install pump in basin and
switch and a mercury
connect electrical wiring
alarm float switch
• Check valve
• Quick-disconnect rail
Outside Packages:
system with stainless
Simplex 24”:
steel rails, check valve
• MRG20 2 HP grinder pump
and ball valve
230V, 1Ø
• Wide-angle on/off float
• Basin, FRP 24” x 5’
switch and a mercury
alarm float switch
24” x 6’
• NEMA 4X junction box
24” x 7’
24” x 8’
• Polypropylene cover
• Two SDR-35 inlet hubs
and Sch. 40 adapters
39
M9040SSE
GRINDER PUMPS
GOO D
BETTER
BEST
Retrofit System
The Retrofit System is completely assembled and easily
installs into an existing progressing cavity grinder
system. The package system features the highly reliable
grinder pump with mercury-free float controls, and no
additional plumbing is required.
Superior Features
• Completely assembled, ready to drop in place
replacement package
• Featuring a dependable grinder pump
• Affordable
• Long life, dependable operation
• Retrofits existing progressing cavity grinder systems
Typical Application
Package designed specifically for use in
residential sewer applications
Floats
18/2 SJOW, UL Listed for use in sewage
applications
Control Panel
NEMA 4 rated disconnect panel
Prewired with electrical
quick disconnect to easily
wire into existing systems
Retrofit System with MRG20 not shown.
40
M9041SSE
GRINDER PUMPS
GOO D
BETTER
BEST
G2DT/G2D Series
Commercial Wastewater Applications
ADVANCED HIGH-TORQUE
CUTTING SYSTEM
Maximum Torque - Better
disintegration of solids &
fibrous matter
Adjustable Self-Cleaning
Blades - Longer blade life
and lower maintenance
costs
Intelligent Trash
Rejection™ - Prevents
clogging and preserves
blades and motor
SPECIFICATIONS
G2DT
HIGH-EFFICIENCY MOTOR
Continuous-Duty
Rated - Maintains
performance specifications
at 100% duty cycle
Air Cooled - Outperforms
oil-filled motors for superior
cooling and longer life
Oil-Free - Cleaner
maintenance and no oildisposal issues
SUPERIOR SEALS
Silicon Carbide Mechanical
Seal - Superior abrasion
resistance
Dry-Run Safe - Conducts
heat from the seal when
pump is run dry
Double Seal with Leak
Detection - Redundant
seals with alert system if
seals fail (optional)
Horsepower
Max. head
Max. flow rate
2
56
73
2
82
75
Voltage
200V / 1Ø, 9.2 FLA, 60Hz
230V / 1Ø, 8.2 FLA, 60Hz
200V / 3Ø, 6 FLA, 60Hz
230V / 3Ø, 5.1 FLA, 60Hz
460V / 3Ø, 2.6 FLA, 60Hz
200V / 1Ø, 13.8 FLA, 60Hz
230V / 1Ø, 12 FLA, 60Hz
200V / 3Ø, 8.6 FLA, 60Hz
230V / 3Ø, 7.3 FLA, 60Hz
460V / 3Ø, 3.7 FLA, 60Hz
Cable
25' SOOW 12/6 AWG 12
25' SOOW 12/6 AWG 12
Bearing
O-rings
Shaft seal motor side
Shaft seal medium side
Volute material
Discharge connection
Inlet diameter
Impeller type (material)
ball bearing
NBR 70
lip seal
SiC mech. seal
cast iron
1-1/4" NPT
8xØ .315
semi open (cast iron)
1Ø = 5.12”
3Ø = 5.31”
ball bearing
NBR 70
lip seal
SiC mech. seal
cast iron
1-1/4" NPT
8xØ .315
1Ø = 5.12”
3Ø = 5.31”
Impeller diameter
Cord Options: Add -50 to end of model number to order a 50’ cord. Add -100 to end of model
number to order a 100’ cord.
Best Efficiency Point
100
90
80
G2D Series
70
TDH (ft)
60
G2DT Series
50
40
30
20
10
0
10
20
30
40
G2D
50
60
70
80
90
Flow Rate (GPM)
41
GRINDER PUMPS
GOO D
BETTER
BEST
G3D Series
Commercial Wastewater Applications
SPECIFICATIONS
200
3
112
66
Voltage
200V / 1Ø, 20.3 FLA, 60Hz
230V / 1Ø, 18.7 FLA, 60Hz
200V / 3Ø, 12.3 FLA, 60Hz
230V / 3Ø, 11 FLA, 60Hz
460V / 3Ø, 6.3 FLA, 60Hz
Cable
Bearing
O-rings
Volute material
Inlet diameter
Impeller type (material)
Impeller diameter
180
160
140
120
TDH (ft)
Horsepower
Max. head
Max. flow rate
G3D Series
100
80
60
40
25' SOOW 3Ø 12/6 AWG 12 / 1Ø
10/6 AWG 10
20
0
ball bearing
NBR 70
lip seal
SiC mech. seal
cast iron
1-1/4" NPT
8xØ .315
130 mm
135 mm
10
20
30
40
50
Flow Rate (GPM)
Cord Options: Add -50 to end of model number to order a
50’ cord. Add -100 to end of model number to order a 100’ cord.
FEATURES
ADVANCED HIGH-TORQUE CUTTING SYSTEM
Maximum Torque - Better disintegration of solids & fibrous
matter
Adjustable Self-Cleaning Blades - Longer blade life and
lower maintenance costs
Intelligent Trash Rejection™ - Prevents clogging and
preserves blades and motor
Continuous-Duty Rated - Maintains performance
specifications at 100% duty cycle
Air Cooled - Outperforms oil-filled motors for superior
Oil-Free - Cleaner maintenance and no oil-disposal issues
SUPERIOR SEALS
Silicon Carbide Mechanical Seal - Superior abrasion
resistance
Dry-Run Safe - Conducts heat from the seal when pump is
run dry
Double Seal with Leak Detection - Redundant seals with
alert system if seals fail (optional)
42
60
70
80
90
GRINDER PUMPS
GOO D
Grinder Series
PERFORMANCE CHART
Model #
RPM
Max.
Head
Max.
Flow
Weight
9.2
3080
57
73
62
8.2
3080
57
73
62
6.0
3150
56
75
62
230
5.1
3150
56
75
62
460
2.6
3200
56
75
62
1
200
13.8
3330
82
75
84
1
230
12.0
3330
82
75
84
HP
Phase
Volts
G2DT-01
2
1
200
G2DT-21
2
1
230
G2DT-03
2
3
200
G2DT-23
2
3
G2DT-43
2
3
G2D-01
2
G2D-21
2
Amps
(full load)
G2DT-Series
(lbs)
G2D-Series
G2D-03
2
3
200
8.6
3150
85
79
64
G2D-23
2
3
230
7.3
3150
85
79
64
G2D-43
2
3
460
3.7
3200
85
79
64
3
1
200
20.3
3540
115
66
99
G3D-Series
G3D-01
G3D-21
3
1
230
18.7
3540
115
66
99
G3D-03
3
3
200
12.3
3450
112
66
95
G3D-23
3
3
230
11.0
3450
112
66
95
G3D-43
3
3
460
6.3
3470
112
66
95
PERFORMANCE CURVES
Consult factory for custom impeller trims
120
100
G3D Series
THD (ft)
80
G2D Series
60
G2DT Series
40
20
0
10
20
30
40
50
60
Flow Rate (GPM)
43
70
80
90
BETTER
BEST
WASTEWATER SOLIDS HANDLING PUMPS
GOO D
BETTER
BEST
3MW Series
3" Non-Clog Wastewater Pumps Vertical Discharge
effluent
Capacities
330 GPM
1,247 LPM
Shut-off head
92’
32 m
Solids handling
1750 RPM:
3450 RPM:
2-1/2”
2”
63.5 mm
50.6 mm
raw sewage, rain water,
effluent
Intermittent liquid temp. 140°F
60°C
Available motor
(single phase are PSC
type; three phase need
Myers® control panel)
3450 RPM
1–3 HP
1750 RPM
1-1/2–3 HP
208/230V,
1Ø, 60Hz
208/230/460/575V,
3Ø, 60Hz
Acceptable pH range
6-9
Discharge
3” NPT (vertical)
48”
Motor housing
cast iron
Power cord
25’, SOW/SOWA
Shaft seal
(Optional)
45
60
75
90
90
27
80
24
70
21
60
18
3450 RPM
50
15
40
12
30
9
20
0
6
1750 RPM
10
0
40
80
120
160
200
240
3
280
320
360
0
TOTAL HEAD IN FEET
Liquids handling
30
1.2 m
75
150
225
300
375
450
525
600
675
750
90
27
80
24
70
21
3MW10M
2 3 HP
3MW10M
2 2 HP
3MW10M
2 1-1/2
HP
3MW10
M2 1 HP
60
50
40
3450 RPM
30
20
18
15
12
9
6
10
0
3
0
20
40
60
80
100
120
140
160
180
200
carbon/ceramic type 21
tungsten carbide
FEATURES
• High-efficiency
hydraulic design
• Two-vaned rounded
port impellers
• Offered in two speeds
• Hydraulic end virtually
maintenance-free
• Volute seal ring
replaceable
in minutes
reliable service
constant bearing
lubrication
single-phase motors; no
starting switches or relays
• Optional seal leak probe
(dual seal motors only)
• Current and temperature
overload (single phase
only)
• CSA Listed
44
M9044SSE
Applications
TOTAL HEAD IN FEET
15
SPECIFICATIONS
SPECIFICATIONS
SPECIFICATIONS
GOO D
BETTER
BEST
3WHV Series
3" Non-Clog Wastewater Pumps Vertical Discharge
Applications
effluent
Capacities
400 GPM
1,511 LPM
Shut-off head
48’
14.6 m
Solids handling
2-1/2”
63.5 mm
Liquids handling
raw unscreened sewage,
rain water, effluent
up to 140°F
TOTAL HEAD IN FEET
60
Available motor
1750 RPM; 1-1/2–5 HP, 230V,
1Ø, 60Hz; 208/230/460/575V,
3Ø, 60Hz
Acceptable pH range
6-9
Discharge
3” (flanged)
76.2 mm
60”
1.5 m
Motor housing
cast iron
Power cord
25’, SOW/SOW-A
Shaft seal
(Optional)
single type 21, carbon &
ceramic tungsten carbide
500
6-3/4
40
6-1/
30
20
0
1000
1500
2000
18
50
10
up to 60°C
0
16
" IM
P. DIA
. 3W
14
HV50
M4 5
HP
12
2" I
6" I MP. DIA.
MP. D
3
IA. 3 WHV30M
W HV
20M4 4 3 HP
5-1/
2" I M
2 HP
P. DIA
. 3WH
V15M4
1-1/2 H
P
0
100
200
10
8
6
4
SPECIFICATIONS
SPECIFICATIONS
SPECIFICATIONS
2
300
400
500
FEATURES
• High-volume capacity
for commercial use
• Apartments,
condominiums,
restaurants, shopping
centers, motels, rest
stops, campgrounds,
offices, hospitals and
more
• Sewage collection
systems and treatment
plants
• 1-1/2, 2, 3 & 5 HP models
• Oil-filled for maximum
heat dissipation and
constant bearing
lubrication
• On-winding overload
(1Ø) protects motor
• High-efficiency hydraulics
• Two-vane rounded port
impellers pass 2-1/2”
solids with ease
• CSA Listed
45
M9045SSE
GOO D
3RMW
Submersible wastewater vortex pumps
BETTER
BEST
48
42
SPECIFICATIONS
36
For use with sewage and
light commercial applications
30
Capacities
up to 280 GPM (17.7 LPS)
24
Motor
40%
44%
46%
5.00"
44%
up to 51 ft. (15.6 m)
(1750 RPM)
(3450 RPM)
1.5–3 HP, 1ø, 208V/230V, 60Hz;
1.5–3 HP, 3ø,
208V/230V/460V/575V, 60Hz
(1750 RPM)
1.5–3 HP, enclosed, oil-cooled
induction
(3450 RPM)
3 hp
18
1.5–3 HP, 1ø, 208V/230V, 60Hz;
1.5–3 HP, 3ø,
208V/230V/460V/575V, 60Hz
1.5 hp
6
0
US GPM
1750 RPM
1.5–3 HP, enclosed, oil-cooled
induction
56
Intermittent Liquid Temp.
140°F (60°C)
48
Minimum Recommended
Sump Diameter
Duplex = 48" (1219.2 mm)
44
Operation
Control panel required
36
Materials of Construction
Class 30 cast iron; ASTM A48
32
Impeller
Ductile iron; Class 65; ASTM A536
28
Discharge Size
3" (76.2 mm) flanged horizontal
24
Solids
Handling
(1750 RPM)
2.5" (63.5 mm)
20
(3450 RPM)
2” (50.6 mm)
12
40
80
120
160
200
240
280
360
52 4.00"
3.75"
34% 36%
38%
40 3.50"
40%
38%
36%
3 hp
16
Head, feet
20'; type SJOW/SJOWA, SOOW
2 hp
1.5 hp
4
0
US GPM 20
3450 RPM
FEATURES
• Recessed impeller design
has completely open
passage in volute
• Operates without vibration
or cavitation over entire
performance curve;
operates near shutoff
without harming pump
• Recessed impeller greatly
increases bearing life by
reducing radial load
320
60 Hz
8
Power Cord
40%
2 hp
12
Head, feet
Electrical
34%
5.50"
Typical Application
Heads
6.00"
40
60
80
100
120
140
160
180
200
220
240
NEW!
VORTEX
PUMP FOR LIGHT
C O M M E R C I A L
A P P L I CAT I O N S
lubrication
• Heat sensor thermostats
embedded in windings
protect motor from
overheat conditions
• Seal leak probes warn of
moisture entry (dual seal
only)
46
260
60 Hz
GOO D
BETTER
BEST
V1D Series
Vortex Pumps for Commercial Wastewater Applications
SPECIFICATIONS
20
1
Max. head
16‘
Max. flow rate
Cable
264 GPM
200V / 1Ø, 9 FLA, 60Hz
230V / 1Ø, 8 FLA, 60Hz
200V / 3Ø, 9 FLA, 60Hz
230V / 3Ø, 6.2 FLA, 60Hz
460V / 3Ø, 3.5 FLA, 60Hz
25' SOOW 12/6 AWG 12
Bearing
ball bearing
O-rings
NBR 70
lip seal
Voltage
SiC mech. seal
Volute type / material
cast iron
ANSI #150
Inlet diameter
Ø 3.94“
Impeller type / material
vortex (cast iron)
Impeller diameter
5.906“
Free passage
3.937“
Weight with cable
108 lbs.
18
16
14
12
TDH (ft)
Horsepower
V1D Series
10
8
6
4
2
0
50
100
150
200
250
Flow Rate (GPM)
FEATURES
ADVANCED VORTEX IMPELLER
High-Speed Rotary Action - Spins solids away from, not
through, impeller
Large Solid Removal - Easily handles up to 4” abrasive,
fibrous and solid matter
Commercial Grade Components - For long service life and
high operational reliability
SUPERIOR SEALS
resistance
run dry
47
300
350
400
450
GOO D
BETTER
BEST
V15D Series
SPECIFICATIONS
50
1.5
Max. head
23‘
Max. flow rate
Cable
352 GPM
200V / 1Ø, 13.3 FLA, 60Hz
230V / 1Ø, 11.6 FLA, 60Hz
200V / 3Ø, 9.7 FLA, 60Hz
230V / 3Ø, 7.4 FLA, 60Hz
460V / 3Ø, 4 FLA, 60Hz
25' SOOW 12/6 AWG 12
Bearing
ball bearing
O-rings
NBR 70
lip seal
Voltage
SiC mech. seal
cast iron
ANSI #150
Inlet diameter
Ø 3.94“
vortex (cast iron)
Impeller diameter
6.496“
Free passage
3.937“
Weight with cable
108 lbs.
45
40
35
30
TDH (ft)
Horsepower
25
20
V15D Series
15
10
5
0
50
100
150
200
250
Flow Rate (GPM)
FEATURES
through, impeller
SUPERIOR SEALS
resistance
run dry
48
300
350
400
450
GOO D
BETTER
BEST
V2D Series
SPECIFICATIONS
50
1.5
Max. head
23‘
Max. flow rate
Cable
352 GPM
200V / 1Ø, 13.3 FLA, 60Hz
230V / 1Ø, 11.6 FLA, 60Hz
200V / 3Ø, 9.7 FLA, 60Hz
230V / 3Ø, 7.4 FLA, 60Hz
460V / 3Ø, 4 FLA, 60Hz
25' SOOW 12/6 AWG 12
Bearing
ball bearing
O-rings
NBR 70
lip seal
Voltage
SiC mech. seal
cast iron
ANSI #150
Inlet diameter
Ø 3.94“
vortex (cast iron)
Impeller diameter
6.496“
Free passage
3.937“
Weight with cable
108 lbs.
45
40
35
30
TDH (ft)
Horsepower
25
V2D Series
20
15
10
5
0
50
100
150
200
250
Flow Rate (GPM)
FEATURES
through, impeller
SUPERIOR SEALS
resistance
run dry
49
300
350
400
450
GOO D
BETTER
BEST
V3D Series
SPECIFICATIONS
50
1.5
Max. head
23‘
Max. flow rate
Cable
352 GPM
200V / 1Ø, 13.3 FLA, 60Hz
230V / 1Ø, 11.6 FLA, 60Hz
200V / 3Ø, 9.7 FLA, 60Hz
230V / 3Ø, 7.4 FLA, 60Hz
460V / 3Ø, 4 FLA, 60Hz
25' SOOW 12/6 AWG 12
Bearing
ball bearing
O-rings
NBR 70
lip seal
Voltage
SiC mech. seal
cast iron
ANSI #150
Inlet diameter
Ø 3.94“
vortex (cast iron)
Impeller diameter
6.496“
Free passage
3.937“
Weight with cable
108 lbs.
45
40
35
30
TDH (ft)
Horsepower
25
V3D Series
20
15
10
5
0
100
200
300
400
500
Flow Rate (GPM)
FEATURES
through, impeller
SUPERIOR SEALS
resistance
run dry
50
600
700
800
900
Vortex Series
PERFORMANCE CHART
Model #
V1D-Series
V1D-01
V1D-21
V1D-03
V1D-23
V1D-43
V15D-Series
V15D-01
V15D-21
V15D-03
V15D-23
V15D-43
V2D-Series
V2D-01
V2D-21
V2D-03
V2D-23
V2D-43
V3D-Series
V3D-01
V3D-21
V3D-03
V3D-23
V3D-43
HP
Phase
Volts
Amps (full load)
RPM
Max. Head
Max. Flow
Weight (lbs)
1
1
1
1
1
1
1
3
3
3
200
230
200
230
460
9.0
8.0
9.0
6.2
3.5
1680
1680
1685
1685
1685
16
16
16
16
16
264
264
264
264
264
108
108
108
108
108
1.5
1.5
1.5
1.5
1.5
1
1
3
3
3
200
230
200
230
460
13.3
11.6
9.7
7.4
4.0
1675
1675
1675
1675
1675
23
23
23
23
23
352
352
352
352
352
108
108
108
108
108
2
2
2
2
2
1
1
3
3
3
200
230
200
230
460
17.2
15.5
10.7
8.7
4.6
1650
1675
1620
1620
1620
31
31
31
31
31
396
396
396
396
396
108
108
108
108
108
3
3
3
3
3
1
1
3
3
3
200
230
200
230
460
20.5
18.5
13.6
12.5
7.0
1720
1720
1670
1670
1670
36
36
39
39
39
484
484
484
484
484
117
117
117
117
117
PERFORMANCE CURVES
Consult factory for custom impeller trims
40
V3D Series
V2D Series
30
THD (ft)
V15D Series
20
V1D Series
10
0
100
200
300
400
500
600
Flow Rate (GPM)
51
700
800
Cord Options: Add -50 to end
of model number to order
a 50’ cord. Add -100 to end
of model number to order a
100’ cord.
Simplex and Duplex Packge Systems
For use with Commercial Grinders and Vortex Pumps
FEATURES
Pre-Packaged Systems
Fiberglass basins are made with the highest quality chophoop filament and feature an all non-corrosive stainless
steel guide-rail system with brass disconnects for maximum durability and performance.
Rail Systems for Easy Pump Upgrade and Retrieval
Whatever your requirements, we can provide virtually any
configuration of basin size, guide rails and an assortment
of covers and accessories.
PRE-PACKAGED SYSTEMS ELIMINATE GUESSWORK
OF SELECTING COMPONENTS
• No mismatched or improperly fitting parts
EASY INSTALLATION
• Excavate & secure
• Connect discharge lines, locate and mount inlet hub
• Locate and mount panel
• Install pump(s)
• Connect electrical wiring
52
Basin Selection Guide
Dual Seal Grinder Pumps
Dual Seal 4" Solids Handling Pumps
Model
Number
HP
Phase
G2DT-01
2
1
Basin Systems
Simplex
Duplex
G2DT-21
Model
Number
HP
Phase
V1D-01
1
1
V1D-03
3
G2DT-23
V1D-23
G2DT-43
V1D-43
2
G2D-03
3
G2D-23
G2D-43
3
V15D-01
1
G2D-21
G3D-01
Duplex
P3S-4884
P3S-4896
P3S-48120
P3S-48144
P3D-6084
P3D-6096
P3D-60120
P3D-60144
V1D-21
G2DT-03
G2D-01
Basin Systems
Simplex
P1S-3060
P1S-3072
P1S-3084
P1S-3096
P1D-3660
P1D-3672
P1D-3684
P1D-3696
1.5
1
V15D-21
V15D-03
3
V15D-23
V15D-43
V2D-01
1
G3D-21
G3D-03
3
2
1
V2D-21
V2D-03
3
G3D-23
V2D-23
G3D-43
V2D-43
V3D-01
3
3
1
V3D-21
V3D-03
V3D-23
V3D-43
COVER OPTIONS
Solid Fiberglass (non-skid available)
The solid fiberglass is constructed with continuous mat or
chopped-strand glass fiber reinforcement with a minimum
thickness of 0.325 inch, is green in color and is mounted to
the wet well with six 300 series stainless steel fasteners.
Steel Hatch
The wet well (and integral valvebox) cover shall be
constructed of 0.375 inch thick black enameled ASTM A36
structural steel plate and features a recessed handle and
locking pin.
Aluminum Hatch
The wet well (and integral valvebox) cover is constructed of
0.250 inch thick mill finish aluminum diamond plate with
300 series stainless steel hardware and features a recessed
handle and locking pin.
53
3
Selection Guide
Amps
Cord
Length
Weight
200
9.2
25
62
SPGV-1
CPGV1-10-S
CPGV1-10-D
230
8.2
25
62
SPGV-2
CPGV1-10-S
CPGV1-10-D
HP
Phase
Volts
G2DT-01
2
1
G2DT-21
G2DT-03
(lbs)
Start Pack*
200
6.0
25
62
Not Required
CPGV3-06-S
CPGV3-06-D
G2DT-23
230
5.1
25
62
Not Required
CPGV3-06-S
CPGV3-06-D
G2DT-43
460
2.6
25
62
Not Required
CPGV3-04-S
CPGV3-04-D
G2D-01
3
Standard Control Panels
Simplex
Duplex
(full load)
Model
Number
2
1
G2D-21
G2D-03
13.8
25
84
SPGV-3
CPGV1-16-S
CPGV1-16-D
12.0
25
84
SPGV-4
CPGV1-16-S
CPGV1-16-D
200
8.6
25
62
Not Required
CPGV3-10-S
CPGV3-10-D
G2D-23
230
7.3
25
62
Not Required
CPGV3-10-S
CPGV3-10-D
G2D-43
460
3.7
25
62
Not Required
CPGV3-04-S
CPGV3-04-D
CPGV1-24-D
G3D-01
3
200
230
3
1
200
20.3
25
99
SPGV-5
CPGV1-24-S
230
18.7
25
99
SPGV-6
CPGV1-24-S
CPGV1-24-D
200
12.3
25
95
Not Required
CPGV3-16-S
CPGV3-16-D
G3D-23
230
11.0
25
95
Not Required
CPGV3-16-S
CPGV3-16-D
G3D-43
460
6.3
25
95
Not Required
CPGV3-10-S
CPGV3-10-D
G3D-21
G3D-03
3
V1D-01
1
1
V1D-21
V1D-03
9.0
25
108
SPGV-7
CPGV1-10-S
CPGV1-10-D
8.0
25
108
SPGV-8
CPGV1-10-S
CPGV1-10-D
200
9.0
25
108
Not Required
CPGV3-10-S
CPGV3-10-D
V1D-23
230
6.2
25
108
Not Required
CPGV3-06-S
CPGV3-06-D
V1D-43
460
3.5
25
108
Not Required
CPGV3-04-S
CPGV3-04-D
200
13.3
25
108
SPGV-9
CPGV1-16-S
CPGV1-16-D
230
11.6
25
108
SPGV-10
CPGV1-16-S
CPGV1-16-D
V15D-01
3
200
230
1.5
1
V15D-21
V15D-03
200
9.7
25
108
Not Required
CPGV3-10-S
CPGV3-10-D
V15D-23
230
7.4
25
108
Not Required
CPGV3-10-S
CPGV3-10-D
V15D-43
460
4.0
25
108
Not Required
CPGV3-06-S
CPGV3-06-D
CPGV1-24-D
V2D-01
3
2
1
200
17.2
25
108
SPGV-11
CPGV1-24-S
230
15.5
25
108
SPGV-12
CPGV1-16-S
CPGV1-16-D
200
10.7
25
108
Not Required
CPGV3-16-S
CPGV3-16-D
V2D-23
230
8.7
25
108
Not Required
CPGV3-10-S
CPGV3-10-D
V2D-43
460
4.6
25
108
Not Required
CPGV3-06-S
CPGV3-06-D
CPGV1-24-D
V2D-21
V2D-03
V3D-01
3
3
1
200
20.5
25
117
SPGV-13
CPGV1-24-S
230
18.5
25
117
SPGV-14
CPGV1-24-S
CPGV1-24-D
200
13.6
25
117
Not Required
CPGV3-16-S
CPGV3-16-D
V3D-23
230
12.5
25
117
Not Required
CPGV3-16-S
CPGV3-16-D
V3D-43
460
7.0
25
117
Not Required
CPGV3-10-S
CPGV3-10-D
V3D-21
V3D-03
3
Cord Options: Add -50 to end of model number to order a 50' cord. Add -100 to end of model number to order a 100' cord.
Impeller Trim Option: Consult factory
*Start Pack: Includes capacitors and relay. Required for single phase only.
54
Selection Guide
Full Featured Control Panels
Simplex
Duplex
CPGVF1-10-S
CPGVF1-10-D
CPGVF1-10-S
CPGVF1-10-D
CPGVF3-06-S
CPGVF3-06-D
CPGVF3-06-S
CPGVF3-06-D
CPGVF3-04-S
CPGVF3-04-D
CPGVF1-16-S
CPGVF1-16-D
CPGVF1-16-S
CPGVF1-16-D
CPGVF3-10-S
CPGVF3-10-D
CPGVF3-10-S
CPGVF3-10-D
CPGVF3-04-S
CPGVF3-04-D
CPGVF1-24-S
CPGVF1-24-D
CPGVF1-24-S
CPGVF1-24-D
CPGVF3-16-S
CPGVF3-16-D
CPGVF3-16-S
CPGVF3-16-D
CPGVF3-10-S
CPGVF3-10-D
CPGVF3-16-S
CPGVF3-16-D
CPGVF3-16-S
CPGVF3-16-D
CPGVF3-10-S
CPGVF3-10-D
Fiberglass Basin Systems
Simplex
Duplex
P1S-3060
P1S-3072
P1S-3084
P1S-3096
P1D-3660
P1D-3672
P1D-3684
P1D-3696
Leg
Kit
Flushing
Tube
RP-JP26016
RP-JP40333
RP-JP20980
RP-JP28221
RP-JP26016
RP-JP40333
RP-JP20980
RP-JP28221
25'
Seal Leak Sensor
50'
100'
RP-JP43899
RP-JP43900
RP-JP43901
Included
As Standard
Included
As Standard
Included
As Standard
RP-JP43899
RP-JP43900
RP-JP43901
Included
As Standard
Included
As Standard
Included
As Standard
CPGVF1-10-S
CPGVF1-10-D
CPGVF1-10-S
CPGVF1-10-D
CPGVF3-10-S
CPGVF3-10-D
CPGVF3-06-S
CPGVF3-06-D
CPGVF3-04-S
CPGVF3-04-D
CPGVF1-16-S
CPGVF1-16-D
CPGVF1-16-S
CPGVF1-16-D
CPGVF3-10-S
CPGVF3-10-D
CPGVF3-10-S
CPGVF3-10-D
CPGVF3-06-S
CPGVF3-06-D
CPGVF1-24-S
CPGVF1-24-D
CPGVF1-16-S
CPGVF1-16-D
CPGVF3-16-S
CPGVF3-16-D
CPGVF3-10-S
CPGVF3-10-D
CPGVF3-06-S
CPGVF3-06-D
CPGVF1-24-S
CPGVF1-24-D
CPGVF1-24-S
CPGVF1-24-D
CPGVF3-16-S
CPGVF3-16-D
CPGVF3-16-S
CPGVF3-16-D
CPGVF3-10-S
CPGVF3-10-D
CPGVF3-16-S
CPGVF3-16-D
CPGVF3-16-S
CPGVF3-16-D
P3S-4884
P3S-4896
P3S-48120
P3S-48144
P3D-6084
P3D-6096
P3D-60120
P3D-60144
RP-JP11453
RP-JP00701
RP-JP28223
Seal Leak Probe:Optional on 3 HP and below
Order RP-JP43899 for 25'. Order RP-JP43900 for 50'. Order RP-JP43901 for 100'.
Cord Options: Add -50 to end of model number to order a 50‘ cord. Add -100 to end of model number to order a 100‘ cord.
55
STAINLESS STEEL PUMPS
Great for
GARDEN
SUPPLY
HOUSES
DU25
1/4 HP Stainless Steel Utility Pump
SPECIFICATIONS
SPECIFICATIONS
Applications
dewatering
Capacities
19 GPM
71.9 LPM
Shut-off head
23’
7m
Operations
manual
Pump-down range
3/8”
9.5 mm
Solids handling
1/8”
3.2 mm
Liquids handling
clear water
Continuous liquid temp.
77° F
Motor
1/4 HP, PSC
Electrical data
115V, 60Hz, 2.5A, 3450 RPM
Acceptable pH range
5-9
25
0
15.1
30.2
49.2
71.9
22° C
6
15
DU2
51
4.5
/4 H
P
10
3
5
0
Mechanical seal
dual lip seal with
ceramic shaft sleeve
Housing
stainless steel
Impeller
polyphenylene oxide
Power cord
15’ SJTW 18-3
Discharge, NPT
1-1/4”
1.5
0
4
8
13
0
19
4.6 m
FEATURES
• Pumps up to 19 GPM
• Extra durable for
heavy-duty use
• Used for dewatering
shallow flooded areas
such as basements,
window wells, rooftops,
ponds and stock tanks
• 1-1/4” NPT discharge
• 15’ power cord
• Includes 1” x 3/4” garden
hose adapter
• Pumps standing water
down to 1/8”
• 1-1/4” NPT x 1” NPT
adapter
• Rated for continuous duty
• CSA Listed
56
M9006SSE
TOTAL HEAD IN FEET
20
Great for
GARDEN
SUPPLY
HOUSES
DS Series
1/3 through 3/4 HP Stainless Steel Sump Pumps
SPECIFICATIONS
SPECIFICATIONS
SPECIFICATIONS
utility
Capacities
45 GPM
170.3 LPM
30
Shut-off head
26’
98.4 m
25
7.6
Operation: On
Off
13”
6.75”
330 mm
171 mm
20
6
Solids handling
3/4”
19 mm
40°C
1/3 HP, 2.7A; 1/2 HP, 4.8A;
3/4 HP, 6.4A; 115V; 60Hz, PSC
Motor, 3450 RPM
Acceptable pH range
5-9
Shaft seal
dual lip with ceramic shaft seal
Housing
stainless steel
Power cord
15’, SJTW, 18/3
Discharge, NPT
1-1/4”
Min. sump diameter
12”
57
76
95
114
15
DS75
10
DS5
01
5
0
133
152
170
190
9
4.5
3/4
HP
3
/2 H
P
1.5
HP
/3
104°F
38
31
19
0
5
10
15
20
25
30
35
40
45
50
0
4.6 m
305 mm
FEATURES
• Used for dewatering from
construction sites, ponds,
pits, tanks and extracting
water from foundations
or flooded basements
• 1/3 HP, 1/2 HP and
3/4 HP available
• PSC motor with selflubricating ball-bearing
construction
• Double lip seals with
ceramic wear surface
• Passes 3/4” solids
• Piggyback-style float
allows for manual
operation
• Includes 1-1/4” NPT x
1-1/4” NPT 90° discharge
elbow, 1-1/4” NPT x 1-1/2”
NPT adapter
• CSA Listed
57
M9016SSE
drain water
0
DS3
Liquids handling
TOTAL HEAD IN FEET
Applications
Great for
GARDEN
SUPPLY
HOUSES
DE Series
4/10 and 1/2 HP Stainless Steel
Continuous Duty Effluent Pump
SPECIFICATIONS
SPECIFICATIONS
SPECIFICATIONS
Capacities
97 GPM
367 LPM
Shut-off head
36’
11 m
1-1/2”
Liquids handling
water
Continuous liquid temp.
130°F
54°C
4/10–1/2 HP, 115V; 4/10 HP,
10.5A; 1/2 HP, 12A; 60Hz
Acceptable pH range
5-9
Specific gravity
.9–1.1
Viscosity
28 –35 SSU
Discharge NPT
2”
Housing
stainless steel
Min. sump diameter
Simplex:
Duplex:
18”
24”
457.2 mm
609.6 mm
20’, SJOW,
16 AWG
6.1 m
0
75
225
150
300
375
18
15
38 mm
Power cord
60
45
12
30
9
DE50
1/2 H
P
DE40
4/10
HP
6
15
3
0
0
25
50
75
0
100
FEATURES
• Pumps up to 97 GPM (1/2 HP) and 92 GPM (4/10 HP)
• Designed to quickly clear water or effluent
• PSC motor with self-lubricating ball-bearing construction
• Ideal for residential and commercial applications
• Tethered float switch
• Double-lip seal with ceramic wear surface
• Suitable for continuous use
• Includes 90° discharge elbow
• CSA Listed
58
M9028SSE
residential and commercial
applications
TOTAL HEAD IN FEET
Applications
Great for
GARDEN
SUPPLY
HOUSES
DSW Series
2" Solids Handling Continuous Duty
Stainless Steel Sewage Pumps
SPECIFICATIONS
SPECIFICATIONS
Capacities
145 GPM
549 LPM
Shut-off head
42’
12.8 m
Solids handling
2”
Liquids handling
sewage, wastewater, effluent
130°F
4/10 HP, 1/2 HP, 115V
1/2 HP, 1 HP, 230V
1 HP, 460V, 3Ø
0
75.7
45
54°C
227.1
302.8
378.5
454.2
529.9
DSW
40
50.8 mm
151.4
DSW100
35
30
100
1 HP
460/
1 HP 2
3Ø
30V
12
10.6
9
DSW
50 1
/2 H
DSW
P 23
40
0V
4/10
DSW
HP
50 1
115
/2 H
V
P 11
5V
25
20
15
10
7.6
6
4.5
3
1.5
5
0
Acceptable pH range
5-9
Discharge, NPT
2” w/90° elbow
Housing
stainless steel
Power cord
20', SJOW,
16 AWG
Impeller
stainless steel
Volute case
stainless steel
Shaft seal
mechanical – carbon & ceramic
605.6
13.7
0
20
40
60
80
100
120
140
0
160
uous
Contin y!
Dut
6.1 m
FEATURES
• Pumps up to 145 GPM
(1 HP), 114 GPM (1/2 HP)
and 103 GPM (4/10 HP)
• Designed for reliable
pumping of wastewater
• Stainless steel, corrosionresistant shaft and
hardware
• Oil-cooled and lubricated,
continuous-duty PSC
motors
• Silicon carbide or carbon
ceramic mechanical seals
• Tethered float switches
feature piggyback controls
• 20’ power cord
• Suitable for continuous
use
• Includes 90°
discharge elbow
• CSA Listed
59
M9035SSE
domestic wastewater
and septic systems
TOTAL HEAD IN FEET
Applications
SPECIAL PURPOSE PUMPS
Pro-Source Pumper
®
5-1/2 HP Engine-Driven Self-Priming Pump
SPECIFICATIONS
SPECIFICATIONS
SPECIFICATIONS
140
0
100
200
300
400
500
water transfer and supply,
sprinkler turf irrigation,
dewatering, fire protection,
agriculture, light commercial
and marine
Capacities
134 GPM
507.2 LPM
Heads
135’
41.1 m
Motor
4-cycle PowerPro gasoline engine
Body/diffuser
reinforced corrosion resistant
thermoplastic
Impeller
polymer
Seals
Viton® mechanical
O-rings/check valve
Viton
Fasteners
300 grade stainless steel
TOTAL HEAD IN FEET
Applications
5-1/2
100
HP E
DP55
RV
30
80
20
60
40
10
40
120
20
0
0
20
40
60
80
100
120
0
140
FEATURES
• Rugged, light-weight
design is ideal for
applications where
electrical power is not
available
• Corrosion-resistant
composite pump
construction
• Automatic low-oil safety
cut, manual throttle,
choke and shut-off
controls
• Built-in check valve
• Securely mounted within
a rugged steel-framed roll
cage that’s coated for
corrosion resistance
• Equipped with noisedampening, non-slip
rubber feet
• Chemical resistant
viton seals; o-rings with
stainless steel fasteners
• Suction lift capability of 25’
Accessories:
• 15’ Suction Hose Kit:
built-in 2” NPTF swivel
fitting and 2” NPTM
fitting for easy hookup;
coil-reinforced wall
prevents collapse;
includes aluminum
suction screen to prevent
debris from reaching
pump
• 25’ Discharge Hose Kit:
built-in 2” NPTF swivel
fitting and 2” NPTM
fitting for easy hookup;
collapsible for easy roll-up
and storage; reinforced
wall adds durability
Viton® is a registered trademark of E. I. du Pont de Nemours and Company.
All other brand or product names are trademarks or registered trademarks of Pentair Ltd.
60
M9203SSE
MES106
Multi-Purpose Pump
SPECIFICATIONS
Capacities
5 GPM
18.9 LPM
Shut-off head
43’
13.1 m
Weight
4 lbs.
Liquids handling
drain water
Intermittent liquid
temp.
104° F
Motor
air-cooled brush motor
Electrical data
115V, 2A, 1Ø, 60Hz
Discharge
Standard garden hose
Power cord
6’
40° C
1.8 m
FEATURES
• Ideal for transferring water, filling tanks
and draining shallow flooded areas
• Up to 5 GPM
• Connects to standard garden hose
• 115VAC with 6’ power cord
• Removes standing water down to 1/8� depth
• Weighs only 4 lbs.
• Built-in carrying handle
• Includes 6’ suction hose and floor drainer
• To operate, just attach a standard hose
to pump discharge and plug into any 115V outlet.
• Air-cooled, high-torque, non-submersible
motor with overload protection
61
M9003SSE
MCU15 / MCU15S / MCU20S Series
Condensate Unit
CAPACITY LITERS PER HOUR
Capacities
MCU20S
MCU15 / MCU15s
200 GPH
120 GPH
757 LPH
454 LPH
Shut-off head
MCU20S
MCU15 / MCU15S
20’
15’
6.1 m
4.6 m
Weight
3.25 lbs.
Liquids handling
drain water
Intermittent liquid
temp.
190° F
Motor
Reluctance synchronous motor
Electrical data
115V, 1.45A, 1Ø, 60Hz
Dimensions
11” x 5” x 4-3/4”
Discharge
3/8” i.d. plastic tubing
(not included)
Tank capacity
2 Quarts
Housing
ABS, high temp, acid-resistant
thermoplastic
Power cord
6’
TOTAL HEAD IN FEET
20
0
100
200
300
400
500
600
700
5
16
MCU
4
20S
12
MC
U1
8
3
5/M
CU1
5S
2
4
0
43°C
6
1
0
25
50
75
100
125
150
175
200
CAPACITY GALLONS PER HOUR
FEATURES
• Ideal for the automatic removal of excess liquid which results from condensation
Applications
• Air conditioner
• Dehumidifier
• Icemaker
• High-efficiency furnaces
• Refrigeration systems
• Water coolers
Advantages By Design
• Lifts to 20’ (MCU20S)
Lifts to 15’ (MCU15/15S)
• Built-in safety switch
• Low-profile unit,
only 4-3/4” high
protection
• High temperature housing
• Built-in check valve
• Double-insulated
enclosure
• Provides longer life than
similar size condensate
units
• Bearingless sealed motor
offers a more reliable,
longer life product
• For indoor use only
62
M9004SSE
SPECIFICATIONS
MUSP125
Utility Sink Pump
SPECIFICATIONS
14
0
25
50
75
100
125
150
151.4 LPM
Shut-off head
14’
4.27 m
Weight
15 lbs.
Liquids handling
drain water
Intermittent liquid
temp.
up to 120° F
Motor
1/3 HP
Electrical data
115V, 4A, 1Ø, 60Hz
Housing
Thermoplastic
Power cord
8’, SJT
12
TOTAL HEAD IN FEET
40 GPM
up to 50° C
10
3
MUS
P12
8
5
2
6
4
1
2
0
0
5
10
15
20
25
30
35
0
40
2.4 m
FEATURES
• Ideal for basement wet bars, laundry and utility sinks
• Designed to be used with a sink where gravity drain line
is not available
• Fully automatic operation
• Complete, compact system
• Easy to install - eliminates the need for traps,
vents and costly labor
• Quiet, trouble-free operation - easily mounts
beneath your sink
• Includes pump assembly, one-way valve, discharge
shut-off/flow balancing valve, strainer cup
• CSA listed
63
M9156SSE
4
Capacities
SPS-4
1/4 HP Dewatering Utility Pump
NEW!
The Myers SPS-4 pump is the ideal solution for a wide
range of water drainage and circulation light-duty
applications. Shallow flooded areas can dewatered
quickly and efficiently with this powerful and
economical utility pump.
SPECIFICATIONS
Capacities
Flows at 10’ Lift at 1260 GPH
Discharge
1” NPT
Shut-off head
22’
Liquids handling
water drainage
Intermittent liquid
temp.
Up to 140° F
Horsepower
1/4 HP
Electrical data
115v AC, 60Hz FLA = 8.5
Acceptable pH Range
6-9
Discharge, Garden
1” Female (includes threaded
garden hose adapter)
Switch off/on
Manual
Housing
Flame-retardant polypropylene
Power cord
8’, SJTW, SJTW-A T-handle cord
connector
6.7m
Up to 60°C
FEATURES
• High-output performance
for removing unwanted
water down to 3/16” depth
• Thermoplastic
construction for the
highest corrosionresistance
• Portable and versatile for
use in window wells,
basements, rooftops, etc.
• Removable inlet screen
for easy cleaning
• Includes 8’ power cord,
garden hose adapter,
detailed owner’s manual
P E R FO R M A N C E ( G P H )
Model
SPS-4
0'
1800
Discharge Height Above Pumping Level
5'
10'
15'
20'
1524
1260
924
372
64
Max Lift
22'
HP
1/4
M9005SSE
EPP Series
PENTEK® Elevator Pump Control System
50
100
150
250
300
350
18
16
50
TOTAL HEAD IN FEET
200
EPP
-ME
40
EPP-
ME45
30
EPP-S
SM33
20
IM1C
MC-1
14
50S
-11
1 1/
2H
1/2
12
HP
10
P
8
1/3 H
6
P
4
10
0
60
0
2
0
0
10
20
30
40
50
60
70
80
90
100
SSM33
ME45
ME50
FEATURES
The Pentek EPP Series
Elevator Pump Control
System is approved for
oil/water detection in
applications where oil and
hydrocarbons are prohibited
from being released into the
environment. The system
is designed to provide
pumping, monitoring and
alarm in garages, elevator
sump pits, transformer
vaults and substations.
The elevator pump control
activates the pump for
removal of water from
elevator pits in accordance
with ASME17.1. The control
will also shut down the
pump before discharging
harmful substances.
• Control panel with
separate pump and
control circuits, NEMA 1
Enclosure;
8.75”H x 6.5”W x 5”D
• Plug-in for quick
and easy installation
• Remote alarm
• Multiple indicator lights:
power on, pump run,
high water, and high oil
indicators
• One pre-set sensor for
easy installation, no field
adjustment necessary
• UL and CSA listed
Elevator Pump Control
Complete Packaged
System:
• 1/3 or 1/2 HP, 115V
sump/effluent pump
• Remote alarm
• Easy clamp-mount
installation, with plug-in
ready wiring
• Compliant with ASME 17.1
and local building and
safety codes
65
Control Operation
On water rise, fluid level
reaches pump “start” probe
to activate the pump. Pump
remains on until fluid level
is below the “off” probe. The
“off” probe senses air or
oil and turns the pump off
so the oil layer (if present)
will not be pumped out of
the sump. If the liquid level
reaches the“alarm” probe
and mechanical float, the
system will differentiate
between water and oil and
activate the remote alarm.
M9202SSE
ACCESSORIES
SRA Lift-out System
1-1/4" to 3" Lift-out Rail Systems for Sewage, Effluent and Grinder Pumps
SPECIFICATIONS
SPECIFICATIONS
SPECIFICATIONS
Elbow size
1-1/4" x 2"
1-1/2" x 2"
2" x 2"
3" x 3"
2" x 3"
Guide plate
SST
Galv/SST
Galv/SST
Galv/SST
Galv/SST
Lift-out elbow w/check valve
cast iron**
cast iron
cast iron
cast iron
cast iron
Mounting base
cast iron
cast iron
cast iron
cast iron
cast iron
Fasteners
SST
SST
SST
SST
SST
O-rings
Buna-N
Buna-N
Buna-N
Buna-N
Buna-N
Guide rails*
1" SST
3/4" SST
3/4" SST
3/4" SST
3/4" SST
Top rail support*
TRS-100
TRS-75
TRS-75
TRS-75
TRS-75
Chain*
Galv/SST
Galv/SST
Galv/SST
Galv/SST
Galv/SST
*Must be ordered separately
**Bronze for explosion-proof
SST=Stainless Steel
Note: SRAX-125 package available for Class 1, Division 1, Groups C and D installations.
FEATURES
• Lift-out rail system
offers ease of service
and reinstallation
• Eliminates need to
disassemble piping
to remove pump
• No need for personnel
to enter basin when
service is required
• Offered with or without
check valve
• Dual rail guides
pump to automatic
leak-proof connection
and to the surface
• Handles 1-1/4” to 3”
discharge pumps
construction for long life
and ease of service
• Heavy-duty cast
iron construction
• Positive machine fit
with O-ring seal
• Choice of galvanized or
stainless steel brackets
for sewage or effluent
service ensures parts
will not corrode together
System Includes:
• Mounting base
• Lift-out elbow with
check valve
• Guide plate
• Fasteners and O-rings
Pump not included
66
M9073SSE
ACCESSORIES
CE, CMEP and CMW
Simplex and Duplex Control Panels
FEATURES
• Quality electrical
components assure
reliable automatic pump
operation
• For 1/4 –7 HP sump,
sewage and effluent
pumps
• IEC horsepower-rated
contactors (1Ø) and
motor starters (3Ø)
• 3Ø starters with
ambient-compensated
quick-trip overloads
• Includes alternating
and override relays to
maximize pump wear
• Designed for use with
off-on alarm (simplex)
and off-on lag-alarm
(duplex) mercury switches
(not included with panel)
• Corrosion resistant
for long life
• Weathertight NEMA 4X
fiberglass enclosure with
outdoor panels
• Indoor NEMA 1 panels
are enamel-coated
galvanized steel
• Meets NEC safety
standards
• UL-508 approved panel
designs
• Outdoor NEMA 4X panels
include standard high
water alarm light
• Indoor NEMA 1 panels
include standard high
water alarm buzzer
Wide range of panel
options:
• Elapsed time meter
• Alarm horn with silence
switch
• Auxiliary contacts
• Condensation heater
• Convenience outlet
• Intrinsically safe relays
• Lightning arrestor
• Full inner door
• Cycle counter
• 24V control circuitry
67
• Transfer switch/generator
receptacle
• Pump delay circuitry
• Low level cut-off and
alarm
• Phase loss circuitry
• Low voltage circuitry
Note:
Additional options available
M9073SSE
ACCESSORIES
Level Controls
FEATURES
SMFNO, SMFNC, and SMFXNO MercuryFree Float Controls
20VM SJE Vertical
Master Pump Switch
• Available with normally open, normally
closed, and intrinsically safe normally open
contact configurations
• For use with Myers® control panels
• Available in 15’ cable lengths
• Piggyback plug with 20’ cord
length
• Available in 115V or 230V plug /
configurations
• Rated at 13A for 115V or 230V,
single-phase use
• Stainless steel pipe
mounting bracket
• Vertical pumping range
of 3/4” to 6-1/2”
MFLC Wide-Angle Mercury-Free
Mechanical Float Controls
• 25’, 18/3 SJOW cord with stabilization weight
• Rated at 3A for 115V or 230V pilot duty use
3-1/3” ABS float
• Has 1 each normally opened and normally
closed circuit
• Use with CE control panels
MFS Series Pump Switch
• Environmentally friendly
mechanical switching uses
no mercury
• Time-proven, dependable,
snap-action switch is activated
by rolling ball and double lever
arm; you can hear it operate
• No mercury to ball or separate,
no inert gas precharge to lose
• Wide-angle operation can be
adjusted to give variable draw-off
• Heavy-duty rated 1/2 HP,
115V or 230V
• Series tap plug allows manual
or automatic piggyback operation
ALC-18 Piggyback Switches
• Available in 115V or 230V plug
configurations
• Handles up to 1/2 HP-115V or 1 HP-230V
single-phase pumps
• Pump-down range adjustable by moving
weights to desired levels
• Standard wiring is normally open, but can
be wired normally closed
• AWS-1 and AWSU-1 versions have built-in
connection boxes
68
M9073SSE
ACCESSORIES
Alarms, Boxes, Check Valves
FEATURES
SA-1/OSA-1 Sump
Alarms
• Audible and visual
(OSA-1) alarms
• Installs in minutes
• Quick-connect
terminal block
construction
• Indoor: NEMA 1 enclosure;
Outdoor: NEMA 4
enclosure
Includes three
power modes:
• Works during
power failure*
- 120V power source
- 9V battery source*
(battery not included)
- 120V with 9V back-up*
*Model SA-1 Only
CA-SS4 Alarm
and Connection Box
Simplex, Duplex
Structural Foam
Junction Boxes
• NEMA 1 enclosure; with
audible alarm, off/on
test switch
Flexible Rubber
Inlet Hubs
• Available for 4” and
6” PVC pipe (Specify
Schedule 40
or SDR 35)
Check Valves (CV-150 shown)
• Thermoplastic check valve with reversible connection
sleeves for adapting to 1-1/4” or 1-1/2” pipes
CV-200P and CV-300P (not shown)
• Compression-type 2” and 3” check valves
CV-200 and CV-300 (not shown)
• Cast iron 2” and 3” check valves
with NPT threaded connections
• Tethered cover and
encapsulated screws;
with cord grips, sealing
compound and adhesive
Basins and Covers
• Size range meets many
pump applications
basins; cast iron or flexible inlet hubs; one- or
two-piece structural foam
covers; 2” or 3” discharge,
2” or 3” vent
Iron Caulking and
Compression-Type Hubs
Discharge and
Conduit Flanges
• Available for 4” and 6”
cast iron and PVC pipe
• Available for 4” and 6”
cast iron and PVC pipe
• IAPMO-approved
• 18” x 30” polypropylene
basins; steel one- or
two-piece covers; 2” or 3”
discharge, 2” or 3” vent;
4” cast iron or flexible
inlet hubs
69
• 24” x 36” and 30” x 48”
FRP fiberglass basins
• Steel cover with separate
simplex or duplex pump
covers; 2” or 3” discharge,
2” or 3” vent
M9073SSE
ACCESSORIES
Controls
FEATURES
FULL-FEATURED PANELS (CPGVF)
• Molded inner dead front door
• 4-line LCD screen HMI on inner door
• Accommodates field-installable auto dialer
(not included with panel)
• 0-5 VDC transducer analog auxiliary signal – SCADA
• Auxiliary contacts – for SCADA or auto dialer
– High level – Power loss – Pump overload
– Pump seal
• Seal fail and thermal overload cut out circuits
• Run-dry protection
• Pump circuit breakers, IEC magnetic contactors/
overloads (1Ø)
• Motor circuit breakers/overloads, IEC magnetic
contactors (3Ø)
SIMPLEX AND DUPLEX PANELS
Quality electrical components assure
reliable automatic pump operation
• Corrosion-resistant NEMA 4X Poly-pro enclosure
• Includes alternating and override controls
• Off-on alarm capable
• Hand-off-auto control
• Alarm beacon
• Alarm buzzer & exterior silence/test switch
• Multi-tap control transformers (3Ø)
• Meets NEC safety standard
• UL-508a approved panel designs
STANDARD PANELS (CPGV)
• IEC contactors and overloads
• Pump run LEDs
• Float status LEDs
• Unique system check test switch
• Seal leak indicator
• Pump circuit breakers
70
ACCESSORIES
Detector, Float Switches, Power Cords
Selection Guide for Commercial Grinders and Vortex Series
FEATURES
SEAL LEAK DETECTOR
• Designed to monitor and protect the shaft seal and motor
housing of the pump. The probe is installed in the seal
cavity of the pump. If a seal begins to leak, contaminating
fluid enters the seal cavity, activating the corresponding
relay and LED indicator in the control panel.
Cord Length
Part Number
25'
RP-JP43899
50'
RP-JP43900
100'
RP-JP43901
(Seal Leak Detector comes standard on 5 and 7.5 HP models,
optional on all pumps up to 3 HP)
FLOAT SWITCHES
• Designed for accurate liquid level control in many
applications, including sewage environments.
• The float switch can be utilized to signify specific water
levels or for direct alarm actuation.
POWER CORDS
• Commercial grade quick-disconnect cords allow
for quick disconnection with no plastic pieces to
break
• 25' standard. 50' and 100' available
Add (-50) to end of model number to order a 50'
cord
Add (-100) to end of model number to order a
100' cord
71
ACCESSORIES
Leg Kits
FEATURES
A variety of different leg kits to suit your specific pump size/weight & application.
Model #
HP
G2DT-01
1
G2DT-21
G2DT-03
Phase Volts
2
G2DT-23
Flushing Tube
Model #
HP
V1D-01
1
RP-JP26016
460
V1D-43
200
V15D-01
G2D-03
2
G2D-23
230
RP-JP20980
RP-JP28221
230
G2D-43
460
V15D-43
G3D-01
200
V2D-01
1
G3D-21
G3D-03
G3D-23
G3D-43
3
3
RP-JP20980
230
V2D-23
460
V2D-43
V3D-01
72
200
460
2
1
200
230
3
200
230
460
3
1
200
3
200
V3D-21
V3D-03
RP-JP28223
200
230
V2D-03
RP-JP28221
RP-JP11453
200
230
3
V2D-21
230
200
1
V15D-23
RP-JP40333
Flushing Tube
460
1.5
V15D-03
RP-JP26016
Leg Kit
200
230
V15D-21
200
3
3
V1D-23
230
G2D-01
G2D-21
1
230
V1D-03
RP-JP40333
G2DT-43
1
Phase Volts
V1D-21
230
200
3
Leg Kit
200
230
V3D-23
230
V3D-43
460
ACCESSORIES
Flushing Tubes & Adapters
FEATURES
Automatic Basin Cleaning and Odor Prevention
Stainless steel flushing tubes are custom-fit to the vent
opening. When the level control gives the pump start signal,
the flushing pipe provides a continuous stream of flushing
water onto the liquid surface, effectively preventing floating
crust and deposits while adding oxygen to the water,
preventing anaerobic buildup in the system.
Easily Upgrade Your Sewage System to Commercial
Performance
A wide variety of attachments and adaptors for virtually any
configuration.
73
ACCESSORIES
74
L I M ITED WARRANT Y
Myers warrants to the original consumer purchaser (“Purchaser” or “You”) of the products listed below, that
they will be free from defects in material and workmanship for the Warranty Period shown below.
®
Product
Warranty Period
Jet pumps, small centrifugal pumps, submersible pumps and
related accessories
whichever occurs first:
12 months from date of original installation,
or 18 months from date of manufacture
Fibrewound Tanks
5 years from date of original installation
Steel Pressure Tanks
5 years from date of original installation
Sump/Sewage/Effluent Products
12 months from date of original installation,
Wastewater Solids Handling Pumps
12 months from date of shipment from factory
Our warranty applies only where such products are used in compliance with the requirements of the applicable product catalog
and/or manuals. For additional information, please refer to the applicable standard limited warranty featured in the product
manual.
Our warranty will not apply to any product that, in our sole judgement, has been subject to negligence, misapplication, improper
installation, or improper maintenance. Without limiting the foregoing, operating a three phase motor with single phase power
through a phase converter will void the warranty. Note also that three phase motors must be protected by three-leg, ambient
compensated, extra-quick trip overload relays of the recommended size or the warranty is void.
Your only remedy, and MYERS’s only duty, is that MYERS repair or replace defective products (at MYERS’s choice). You must pay
all labor and shipping charges associated with this warranty and must request warranty service through the installing dealer as
soon as a problem is discovered. No request for service will be accepted if received after the Warranty Period has expired. This
warranty is not transferable.
MYERS SHALL NOT BE LIABLE FOR ANY CONSEQUENTIAL, INCIDENTAL, OR CONTINGENT DAMAGES WHATSOEVER.
THE FOREGOING LIMITED WARRANTIES ARE EXCLUSIVE AND IN LIEU OF ALL OTHER EXPRESS AND IMPLIED WARRANTIES,
INCLUDING BUT NOT LIMITED TO IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
THE FOREGOING LIMITED WARRANTIES SHALL NOT EXTEND BEYOND THE DURATION PROVIDED HEREIN.
Some states do not allow the exclusion or limitation of incidental or consequential damages or limitations on the duration of an
implied warranty, so the above limitations or exclusions may not apply to You. This warranty gives You specific legal rights and
You may also have other rights which vary from state to state.
This Limited Warranty is effective February 7, 2014 and replaces all undated warranties and warranties dated after
February 7, 2014.
MYERS
293 Wright Street, Delavan, WI 53115
Phone: 888-987-8677 • Fax: 800-426-9446 • www.femyers.com
In Canada: 490 Pinebush Road, Unit 4, Cambridge, Ontario N1T 0A5
Phone: 800-363-7867 Fax: 888-606-5484
PH: 888-987-8677 ORDERS FAX: 800-426-9446
Because we are continuously improving our products and services, Pentair reserves the right to change specifications without prior notice.
© 2014 Pentair Ltd. All Rights Reserved.
M9000SSE 2014V2 (02/10/14)

professional plumbing products catalog

Transcription

Similar documents

Seal Water System

60122053 SCHEDA TECNICA EUROCOVER gb fr.indd

KW5 cuts - Keen Pump

CARBONATOR MOTOR MOUNTED BRONZE ROTARY GEAR

Heavy duty PTO pump

SCANPUMP PUMPS Working space packing THE SCANPUMP

WISA 300 air pump specifications and diagrams

T-REX Manual - RC Helitechnics