SCANPUMP PUMPS Working space packing THE SCANPUMP

Transcription

SCANPUMP PUMPS Working space packing THE SCANPUMP
tradition w
strength w
experience
SCANPUMP PUMPS
T
HE SCANPUMP PUMPS are designed especially for
pumping and delivery of all common sorts of paper stocks with
consistency up to 6 %, furthermore for water, impure liquids and
sediments.
Design of their hydraulic part with an opened impeller enables to
pump stocks with high efficiency and reliability in service.
According to a pump size their flow rate is ranging from 20 to 6.500
m3/h at delivery head from 5 to 160 m. All parts coming in contact
with the concerned liquid are made of stainless materials providing
a wide range of applications. The hydraulic part is formed by a
right-handed pump casing provided with footing. The delivery part
is made as a tangentially flanged branch. The volute-type casing is
completed with a front plate.
2
4
6
3
1
5
8
Main parts
w
volute-type casing (1)
w
impeller (2)
w
shaft bedded in bearings of beam-pumping unit (3)
w
clutch with guard (4)
w
base frame for pump and electric motor (5)
w
electric motor (6)
8
Advantages
w
easy installation and assembly of pumping set comprising
pump and electric motor
w
simple routine maintenance
7
Impeller types:
w
6-vane (basic) impellers, used for pumping of stocks with
consistency up to 6 %, provide high pumping efficiency
w
3-vane impellers are used for pumping of thick liquids,
recycled paper and in applications with danger of pump
clogging
w
special impellers intended for reduction of pressure pulsation
at pumping
w
alternative to basic impellers intended for pump size 1-2
Semi-open impeller “Standard”
Semi-open impeller
with a reduced number of vanes
Special low-pulsation impeller
Semi-open impeller “Vortex”
7
Material
All working parts of the pump, incl. impeller, are casted from
stainless steel, other parts are made of structural steel and grey
cast iron.
87
Design and work safety are in compliance with EU standards.
Working space packing
3
2
These pumps are standardly supplied with mechanical seals
packed with cords. Optionally and according to the given
medium to be pumped we can install also other types of seals.
For stocks with consistency up to 3 % our pumps are provided
with single mechanical seals without rinsing, for stocks with
consistency exceeding 3 % these seals are rinsed.
As to characteristics of particular liquids to be pumped it is
possible to use also doubled mechanical seals or even packing
cartridges.
Alternatively, our pumps can be provided also with dynamical
seals (MasterSeal). This type of the seal is intended especially
for pumps running in day-and-night duty.
PAPCEL, a.s. Litovel, Czech Republic
120
tradition w
strength w
experience
Base frame as reinforcedconcrete plate
(pump size 1 - 6)
Base frame welded from
steel plates
(pump size 1 - 4)
Base frame welded from
profiles
(pump size 5 - 6)
B
121
PAPCEL, a.s., Uničovská 132, 784 10 Litovel, Czech Republic w
tel.: +420 585 152 175 w
fax: +420 585 343 001 w
e-mail: [email protected] w
http: //www.papcel.cz

Similar documents

Tobee® Bomba de arena de grava horizontal

Tobee® Bomba de arena de grava horizontal Tobee® Las bombas horizontales de grava y arena están diseñadas específicamente para el bombeo continuo de lodos, martillos y arenas extremadamente agresivos. con una amplia distribución granulométrica. Capaz de manejar partículas grandes con eficiencias consistentemente altas, resulta en un bajo costo de propiedad. El perfil interno de gran volumen de la carcasa reduce las velocidades asociadas aumentando aún más la vida útil del componente. Email: [email protected] Web: www.tobeepump.com | www.slurrypumpsupply.com | www.tobee.cc

More information