TEROSON® Liquid Applied Sound Deadener (LASD)

Transcription

TEROSON® Liquid Applied Sound Deadener (LASD)
TEROSON® Liquid Applied Sound Deadener (LASD)
Not Something to Keep Quiet About
The automotive industry is seeking more
sustainable and cost effective solutions. Liquid
Applied Sound Deadener (LASD) is one response
to these trends by providing mass reduction;
improved Noise-Vibration-Harshness (NVH)
performance; reduced operational complexity;
and compliance to expected environmental
regulation. LASD significantly reduces the
structural noise generated by the powertrain
and wheels during operation of the vehicle, by
absorbing and dissipating vibrational energy.
LASD is applied directly to the car body, keeping
unwanted noise and vibration from entering the
vehicle passenger cabin.
TEROSON® LASD is made of polymers, fillers and
other active components to meet specific sounddeadening and vibration damping requirements.
Since the OEM industry continues to pursue
quiet, lightweight, more fuel-efficient cars and
trucks, Henkel is providing the chemistry and the
know-how that makes this possible.
BENEFITS
• Robotically applied LASD assures consistent application, providing
reliable and sustainable NVH performance.
• LASD is a bulk NVH material which reduces inventory complexity and
logistics costs compared to conventional damping pads.
• LASD can be applied robotically utilizing existing MSA and Flatstream
dispensing technologies.
SERVICE AND SUPPORT
Henkel supports its LASD technology with experienced acoustic /
materials engineering, laboratory, and field service personnel. LASD
application systems can be easily added into existing body or paint shop
manufacturing processes.
Henkel’s Acoustic Engineering and Test Center provides customers with
performance analysis in acoustics for optimum NVH solutions. In addition
to panel vibration and sound propragation of a typical body structure,
they evaluate for vibration damping or stiffening body panels using
materials loss factor.*
*The ability of acoustic compounds to dampen vibrations can be assessed by measuring the flexural vibration according to ISO 6721. The acoustic performance loss factor is a
measure of the damping effect.
LASD Key Technologies & Performance
RUBBER BASED LASD
1ST GEN ACRYLIC
LASD
2ND GEN ACRYLIC
LASD
2ND GEN ACRYLIC
LASD
3RD GEN ACRYLIC
LASD
Typical Product Range
8275
2700
7152
7154
7265
Chemical basis
Liquid Polymers
Water-based Acrylic
Dispersion
Water-based Acrylic
Dispersion
Water-based Acrylic
Dispersion
Water-based Acrylic
Dispersion
Solid content
Solvent Free,
100% Dry Content
Dry content >80%
Dry content >75%
Dry content >80%
Dry content >70%
Density
1.3 g/cm3 wet
1.2 g/cm3 dry
1.7 g/cm3 wet
1.5 g/cm3 dry
1.5 g/cm3 wet
0.7 g/cm3 dry
1.6 g/cm3 wet
0.97 g/cm3 dry
1.2 g/cm3 wet
0.5 g/cm3 dry
Acoustic Performance
(Oberst @ 3 kg/m2,
on 1mm beam)
0.16-0.18
0.20-0.25
0.25-0.30
0.25-0.30
0.40-0.45
Peak Performance
Temperature
23° C
30°C
40°C
23° C
40°C
Expansion Ratio
~ 10%
10 - 30%
70 - 90%
30 - 50%
70-90%
Application
Flatstream, Electro-swirl or
airless spray
Flatstream*
Multi-stream applicator
(MSA)
Flastream*
Multi-stream applicator
(MSA)
Flatstream*
Mult-stream applicator
(MSA)
Flatstream*
Multi-stream applicator
(MSA)
Dispensing
Temperature
35°-45° C
Ambient - 35°C
Ambient - 35°C
Ambient - 35°C
Ambient - 35°C
Packaging Options
Drum, Tote, or
Mag Containers
Drum, Tote, or
Mag Containers
Drum, Tote, or
Mag Containers
Drum, Tote, or
Mag Containers
Drum, Tote, or
Mag Containers
Henkel LASD
Technology Range
Acoustic Performance
versus Temperature
(Oberst CLF @ 3kg/m2,
on 1 mm beam)
Composite Loss Factor
Note: all materials will cure under normal paint shop primer conditions of 20 minutes @ 140-160°C
*Preferred
TEROSON 8275
TEROSON 7154
TEROSON 2700
TEROSON 7265
TEROSON 7152
-25
-15
-5
5
15
25
35
45
55
65
Temperature °C
Sustainability
Lightweight
TEROSON LASD reduces greenhouse gas emissions
and improves automotive interior air quality.
TEROSON® LASD can be applied at lower
volumes and achieve target NVH requirements.
Process Efficiency
Cost Reduction
Efficient material placement and application through
acoustic mapping and automated dispensing.
Robotic-applied LASD reduces applied labor,
logistics, and inventory costs.
®
HENKEL CORPORATION
32100 Stephenson Highway
Madison Heights, Michigan 48071
United States
Tel: +1.866.332.7024
Fax: +1.248.583.2976
E-Mobility
www.henkelna.com/automotive
E-Mobility
E-Mobility
All marks used are trademarks and/or registered trademarks of Henkel and its affiliates in the U.S. and elsewhere.
® = registered in the U.S. Patent and Trademark Office. © 2015 Henkel Corporation. All rights reserved. 14365/LT-6770 (5/15)
E-Mobility

Similar documents

TEROSON Liquid Applied Sound Deadener (LASD)

TEROSON Liquid Applied Sound Deadener (LASD) keep quite about A trend is taking hold across the automotive industry: Sound-deadening materials that can be sprayed onto car bodies by robots are increasingly replacing bitumen mats Liquid applie...

More information

TEROSON Liquid Applied Sound Deadener (LASD)

TEROSON Liquid Applied Sound Deadener (LASD) during the drive and it absorbs vibrational resonance. LASD is applied directly to the car body to keep away unwanted noise from entering the vehicle passenger cabin. LASD is a more effective sound...

More information