TEROSON Liquid Applied Sound Deadener (LASD)

Transcription

TEROSON Liquid Applied Sound Deadener (LASD)
TEROSON Liquid Applied
Sound Deadener (LASD)
Sound damping materials for a better environment
TEROSON LASD – Not something to
keep quiet about
A trend is taking hold across the automotive industry:
Sound-damping materials that can be sprayed
onto car bodies by robots are increasingly replacing
bitumen mats
Liquid applied sound deadener (LASD) significantly reduces the
structural born noise generated by the engine and the wheels
during the drive and it absorbs vibrational resonance. LASD is
applied directly to the car body to keep away unwanted noise from
entering the vehicle passenger cabin. LASD is a more effective
sound damping compared to traditional bitumen pads and melt
sheets.
TEROSON LASD is made of polymers, renewable and sustainable
raw materials and other active components to meet specific sounddamping requirements. Since OEM industry continues to pursue
acoustic comfort, light-weight, sustainability, process efficiency and
cost reduction, Henkel is providing the chemistry and the knowhow that makes this possible.
Benefits
>> Significant weight reduction compared to bitumen pads
>> Robotically-applied LASD assures consistent and reliable quality
>> Renewable and sustainable raw materials make LASD
independent from traditional materials
>> Succeeds current VOC limits for interior car body requirements
Applications
TEROSON LASD can be sprayed on car bodies by robot with
existing standard dispensing technology like flatstream.
Service and Support
Henkel supports its LASD customers before, during and after the
launch of the LASD technology. LASD can be easily implemented
into the existing manufacturing process.
>> Process validation
>> Application services
>> Troubleshooting
LASD Key Performance
Rubber-based LASD
Acrylic-based LASD
Thermoset-LASD
Chemical basis
Liquid polymers
Acrylic dispersion
Renewable plant oil
Solid Content
Solvent free,
100 % dry content
Waterborne,
dry content > appr. 80%
Solvent free,
100% dry content
Density
1,4 g/cm³ wet
1,3 g/cm³ dry
1,6 g/cm³ wet
0,9 g/cm³ dry
1,2 g/cm³ wet
1,1 g/cm³ dry
Expansion ratio
< 10%
30 – 50%
< 10%
Application
Flatstream, Electro-Swirl
or Airless spray
Flatstream preferred
Flatstream, Electro-Swirl or
Airless spray
Dispensing temperature
Ambient – 35°C
Ambient – 35°C
Ambient – 35°C
Acoustic performance
(Oberst @ 3 kg/m²)
0,17 – 0,20
0,20 – 0,30
0,15 – 0,25
Emissions (VDA 278)
< 450 ppm
< 300 ppm
< 300 ppm
Delivery pack sizes
Drum, tote, tank truck,
200 ltr. up to 20.000 ltr.
Drum, tote, Fluid Bag,
200 ltr. up to 1.000 ltr.
Drum, tote, tank truck,
200 ltr. up to 20.000 ltr.
Sustainability
Lightweight
Renewable raw materials. Lower VOC levels and
reduced fuel consumption.
Compared with today´s standard products, TEROSON
LASD saves up to 30 percent weight.
Process Efficiency
Cost Reduction E-Mobility
Consistent quality due to automated dispensing.
Robotic-applied LASD reduces labor costs.
Europe
Germany
Henkel AG & Co. KGaA
(Headquarters)
Henkelstraße 67
40589 Düsseldorf
Germany
E-Mobility
Phone: (+49) 211 797-0
Asia-Pacific
E-Mobility
China
Henkel (China) Co. Ltd.
No. 928 Zhang Heng Road
Pu Dong
201203 Shanghai
China
Phone: (+86) 21 2891 8000
Americas
U.S.A.
Henkel Corporation
Madison Heights
32100 Stephenson Highway
Madison Heights, MI 48071
United States
Phone: (+1) 248 583 9300
www.henkel-adhesives.com/lasd
E-Mobility
The data contained herein are intended as reference only. Please contact Henkel AG & Co. KGaA for assistance and r­ ecommendation
on specifi­cations for these products.
® designates a trademark of Henkel AG & Co. KGaA or its affiliates, registered in Germany and elsewhere
© Henkel AG & Co. KGaA, 2015
AT5002151
10.2015