tornos y fresas
Transcription
METALWORKING MACHINE MICRO LATHE Specifications Swing over bed 140mm Distance between centers 250mm Hole through spindle 9mm Spindle taper MT2 Tailstock taper MT1 Spindle speed 100-2000 rpm10% Motor output power 150W Range of threads Metric 0.5-1.25mm(5 thread pitches) or Imperial 16-24TPI(5 thread pitches) Overall dimension (LxWxH) 540x300x270mm Weight (net/gross) 23kg/32kg Packing size (LxWxH) 680x345x305mm Feature: Variable speed Over-load protection Chuck guard with auto power off Inside leadscrew OPTIONAL ACCESSORIES Steady rest Stand Follow rest S/N:10080 S/N:10081 Thread cutting kits Horizontal slider Vertical slider S/N:10082 S/N:10083 Wood tool rest + center 4-Jaw chuck (independent) For C1,C2,C3,Z1,X0, X1,SUPER X1,X2,M1, S/N:10000 Cutter 11 pieces set DIN DIN DIN DIN DIN DIN DIN DIN 4971R 4973R 4975 4977R 4978R 4980L 4980R 4981R DIN 4972R DIN 4974R DIN 4976 Metric z=40,42,45,48,50,54,60 S/N:10084 Imperial z=36,40,42,45,48,50,54,57,60 S/N:10085 Face plate S/N:10086 Headstock center Ball cutting set Clamping kit for face plate 8ñ8mm S/N:10087 S/N:10005 ø112mm T-slot 8mm Quick change cutter rest S/N:10079 S/N:10079A Tool holder Width 50mm S/N:10035 Tool Cut-off Blade Holder Boring Cutter Holder MT#1,10mm S/N:10091 Lathe dog S/N:10144 MT#2 S/N:10088 Tailstock chuck+shank Quick vice S/N:10089 ø80mm S/N 10010 S/N:10015 Rolling center MT#1 S/N:10093 Mill chuck set Cut-off Blade size:70210 mm Boring Cutter Ø 10mm S/N:10089A 3,4,5,6mm S/N:10090 1 METALWORKING MACHINE MINI LATHE Former item No.CJ9518 Model 200/300 Specifications Swing over bed 180 mm Distance between centers Model 200 200 mm Model 300 300 mm Hole through spindle 20 mm Spindle taper MT#3 Tailstock taper MT#2 Spindle speed Low range 0~1100 rpm 10% High range 0~2500 rpm 10% Output power 250 W Range of threads Metric 0.4~2.0mm(10 thread pitches) or Imperial 12~52 TPI(8 thread pitches) Net/Gross weight Model 200 33/36 kg Model 300 37/40 kg Packing size Model 200 670X330X330 mm Model 300 770X330X330 mm Features * * * * Safety switch * Variable speed Four position turret post Complete set of changing gear High accurate C2A is C2 with DRCD C3A is C3 with DRCD DRCD:Digital Readout for Cutting Depth OPTIONAL ACCESSORIES FOR C2,C3 Grinding attachment Digital readout for cutting depth kit (DRCD kit) Mill chuck set Tailstock chuck With draw bar MT#3 Chuck dia. 4,6,8,10,12,14,16mm S/N:10037A 4-jaw chuck (independent) S/N:10140 Dia.13mm+MT#2 S/N:10012 Rolling center S/N:10131 ø80mm S/N:10010 3-jaw chuck Grinding workpiece MT#2 S/N:10014 4-jaw chuck (independent) C2 or C3 owner, replace to DRCD by yourself. Face plate Clamping kit for face plate S/N:10100 ø100mm S/N:10029 ø100mm S/N:10100A ø100mm with flange S/N:10029A ø100mm with flange Spindle center Lathe dog ø160mm MT#3 Grinding cutting tool 2 S/N:10007 S/N:10007A S/N:10013 S/N:10015 METALWORKING MACHINE MINI LATHE Spindle speed readout (inner) Chuck guard with auto power off Over-load auto stop Specifications Swing over bed Distance between centers Hole through spindle Spindle taper Tailstock taper Motor output power 180mm 350mm 20mm MT3 MT2 350 W Low range 100-1200 rpm 10% High range 100-3000 rpm 10% Range of threads Metric 0.4-2.0 mm(10 thread pitches) or Imperial 12-52 TPI(8 thread pitches) Weight (net/gross) 44 Kg/54 Kg Packing size(LXWXH) 850 x 340 x 370 mm Spindle speed Longer! More powerful! OPTIONAL ACCESSORIES FOR C2, C3 Cutter 11 pieces set DIN DIN DIN DIN DIN DIN DIN DIN 4971R 4973R 4975 4977R 4978R 4980L 4980R 4981R Steady rest Follow rest Mill attchment DIN 4972R DIN 4974R DIN 4976 8ñ8mm S/N:10008 S/N:10005 S/N:10009 Quick change cutter rest Cutter 6 pieces set DIN DIN DIN DIN 4972R 4974R 4977R 4978R S/N: 10061 Wood toolrest with center DIN 4973R DIN 4976R 8ñ8mm S/N:10011 S/N:10006 Rocker tool post Cutter 5 pieces set S/N: 10064 DIN DIN DIN DIN 4971R 4980R 4980L 4981R DIN 4975 Digital spindle speed readout (independent using) 8ñ8mm S/N:10136 S/N:10004 Knurling Cutter 2 pieces set S/N:10016 Cut-off tool S/N:10145 tool holder S/N:10130 S/N: 10062 For mini Lathe C2 3 METALWORKING MACHINE BENCH LATHE Former item No.CJ9526 Model 400/550 Specifications Swing over bed Distance between centers Model 400 Model 550 Hole through spindle Spindle taper Tailstock taper Spindle speed (6 steps) Output power Range of threads 250 mm 400 mm 550 mm 20 mm MT#3 MT#2 125~2000 rpm 550 W VARIABLE SPEED BENCH LATHE Metric 0.4~3.0mm(12 thread pitches) or Imperial 10~44 TPI (8 thread pitches) Net/Gross weight Model 400 125kg/160 kg Model 550 145kg/180 kg Packing size Model 400 1100X660X600 mm Model 550 1200X660X600 mm Standard attachment ø125 mm three jaw chuck Dead center MT#2, MT#3 Gear set Spindle speed (variable speed) Output power 0~2000 rpm ±10% 800 W Other specifications are the same as C6. OPTIONAL ACCESSORIES Grinding & Milling attachment Grinding attachment Steady rest S/N:10019 S/N:10021 Max. grinding diameter 24mm Output power 250W Net/Gross weight 7/10Kg Packing size 360X360X220mm S/N:10131 Follow rest S/N:10020 Stand Spindle speed 6000rpm Wheel size 80x20x10mm Output power 150W Model 400 S/N:10017 Model 550 S/N:10018 4 S/N:10022 Wood toolrest with center S/N:10063 Mill attachment S/N:10060 Cutter 11 pcs.set 10X10 mm (picture ref. S/N 10005) S/N:10023 Face plate ø220 mm (picture ref. S/N 10007) S/N:10023A Clamping Kit for face plate S/N:10024 Rolling center MT#2 (picture ref. S/N 10014) S/N:10025 4-jaw chuck (independent) ø 125 mm (picture ref. S/N 10010) S/N:10025A 4-jaw chuck with flange S/N:10026 Quick change cutter rest (picture ref. S/N 10011) S/N:10027 Tailstock chuck dia. 13mm + MT#2 (picture ref. S/N 10012) S/N:10028 2 pieces cutter (picture ref. S/N 10016) METALWORKING MACHINE MICRO DRILL OPTIONAL ACCESSORIES Specifications Drilling capacity Spindle stroke Headstock travel (Z) Spindle taper Motor output power Spindle speed Weight (net/gross) Packing size (LWH) High Low 6mm 40mm 200mm B10 or JT1 150W 5000rpmNM% 3600rpmNM% 14/19Kg 520x400x270mm Work table S/N:10138 Feature * * * * Chuck set Digital depth readout Feeding depth set up 2 steps speed High accurate MICRO MILL Specifications Drilling capacity 6mm End milling capacity 6mm Spindle stroke 40mm Headstock travel (Z) 200mm Spindle taper B10 or JT1 Motor output power 150W Spindle speed (Variable speed) High range 100 - 5000rpmNM% Low range 100 - 3600rpmNM% Weight (net/gross) 15/20Kg Packing size (LWH) 520x400x270 mm S/N:10139 B10-1,2,4,5,6mm S/N:10139A JT1- 3/64”,5/64 ”, 5/32”,3/16 ”, 1/4 ” Quick vice Width 50mm S/N:10035 Stand Feature * * * * * Digital depth readout High accurate Variable speed Feeding depth set up Fine feeding For C1,C2,C3,Z1,X0, X1,SUPER X1,X2,M1, S/N:10000 5 METALWORKING MACHINE MICRO MILL Specifications Drilling capacity End mill capacity Face mill capacity Spindle stroke Throat Max distance spindle to table Spindle taper Spindle speed High range Low range Table effective size T-slot size Table cross travel Table longitudinal travel Motor output power Overall dimension(LxWxH) Weight(net/gross) Packing size(LxWxH) 10mm 10mm 20mm 30mm 140mm 220mm MT2 100-2000rpm±10% 100-1000rpm±10% 240x145mm 8mm 90mm 180mm 150W 425x350x690 32/44kg 420x395x625mm Oil tray for X1 Size 312 x 290mm S/N:10106 Our engineer and the X1. OPTIONAL ACCESSORIES FOR X1,SUPER X1 Vice Rotary table Quick vice Mill chuck set Size 100mm Width 70mm MT#2 Width 50mm S/N: 10094 S/N: 10133 S/N:10035 Chuck dia. 3,4,5,6,8,10mm S/N:10070 Dividing Plate for S/N 10094 vice MT#2 collet 2 Flute HSS end mill Width 55mm S/N: 10094-1 Tailstock for S/N 10094 S/N: 10094-2 6 S/N: 10108 ø3mm ø4mm ø5mm ø6mm ø8mm ø10mm ø3-10mm set S/N:10072 S/N:10073 S/N:10074 S/N:10075 S/N:10076 S/N:10077 S/N:10078 ø3mm ø4mm ø5mm ø6mm ø8mm ø10mm ø3-10mm set S/N:10067 S/N:10038 S/N:10068 S/N:10039 S/N:10040 S/N:10041 S/N:10069 METALWORKING MACHINE MICRO MILL Specifications Drilling capacity End mill capacity Face mill capacity Spindle stroke Throat Max distance spindle to table Spindle taper Spindle speed High range Low range Column rotary angle Table effective size T-slot size Table cross travel Table longitudinal travel Motor output power Weight(net/gross) Packing size(LxWxH) 10mm 10mm 20mm 30mm 140mm 220mm MT2 100-2000rpm±10% 100-1000rpm±10% -450 - +450 240x145mm 8mm 90mm 180mm 150W 40/56kg 530x400x630mm Oil tray for super X1 Size 405 x 260mm S/N:10107 OPTIONAL ACCESSORIES FOR X1,SSUPER X1 Clamping kit Clamping kit Stub milling machine arbor Stub milling machine arbor MT#2 MT#2 for slitting saw,hole ø13mm S/N:10118 12pcs. 24 pcs. Bolt size 6mm Bolt size 6mm include:2 studs, 1 step block pair, 2 T-nuts,2 flange nuts, 2 coupling nuts,2 end holddowns include:4 studs, 2 step block pairs, 4 T-nuts,4 flange nuts, 4 coupling nuts, 4 end holddowns S/N:10104 S/N:10105 Boring arbor with boring cutter for slitting saw,hole ø13mm S/N:10116 Indexable carbide end mill MT#2 MT#2 ø16mm S/N:10117 S/N:10071 7 METALWORKING MACHINE MINI MILLING MACHINE Former item No.XJ9510 Specifications Drilling capacity End milling capacity Face milling capacity Headstock travel(Z) Cross axis(X) Longitudinal axis (Y) Spindle rotary angle Output power Spindle speed Low range High range Spindle taper T-slot Weight (Net/Gross) Packing size 13 mm 16 mm 30 mm 180 mm 100 mm 220 mm -450 - +450 350 W 0~1100 rpm 10% 0~2500 rpm 10% MT#3 or R8 12 mm 50/68 Kg 540x500x760 mm X2A is a X2 with Auto-feed. OPTIONAL ACCESSORIES Quick vice Mill chuck set Auto feeder Width 100mm S/N:10036 MT#3 vice Chuck dia. 4,6,8,10,12,14,16mm S/N:10037 You can mount this Auto feeder on X2 yourself! 2 Flute HSS end mill S/N:10132 Width 80mm S/N:10109 MT#3 collet ø4mm ø6mm ø8mm ø10mm ø12mm ø14mm ø16mm ø4-16mm set S/N:10127 S/N:10128 S/N:10129 S/N:10094 8 S/N:10119 S/N:10120 S/N:10121 S/N:10122 S/N:10123 S/N:10124 S/N:10125 S/N:10126 ø4mm ø6mm ø8mm ø10mm ø12mm ø14mm ø16mm ø4-16mm set S/N:10038 S/N:10039 S/N:10040 S/N:10041 S/N:10042 S/N:10043 S/N:10044 S/N:10045 Clamping kit Indexable carbide end mill MT#3 ø30mm S/N:10046 Stub milling machine arbor MT#3,ø16mm(picture ref.S/N:10116) Boring arbor with boring cutter MT#3(picture ref.S/N:10117) Stub milling machine arbor MT#3,ø16mm(picture ref.S/N:10118) Rotary table 42 pcs. Bolt size:10mm include:12 studs, 6 step block pairs, 4 T nuts, 4 flange nuts, 4 coupling nuts, 6 end holddowns S/N:10047 METALWORKING MACHINE SMALL MILL Specifications Drilling capacity End mill capacity Face mill capacity 25 mm 25 mm 50 mm Spindle stroke Throat Max distance spindle to table Spindle taper Spindle speed 80 mm 232 mm 350 mm MT3 or R8 100-2000 rpm ±10% 100-1000 rpm ±10% High range Low range Table effective sive T-slot size Table cross travel 550X160 mm 12 mm 160 mm Table longitudinal travel Motor output power Overall dimension(LXWXH) 300 mm 600 W 685X560X830 mm Weight (net/gross) Packing size(LXWXH) 135 Kg/160 Kg 790X680X940 mm Chuck guard with auto power off is an optional accessory S/N 10115 OPTIONAL ACCESSORIES Quick Vice Width 100mm OPTIONAL ACCESSORIES S/N: 10036 Vice Work table with angle OPTIONAL ACCESSORIES S/N: 10109 Stand Width 80mm S/N: 10109 Rotary table Size 100mm S/N: 10135 Vice with angle Width 100mm S/N: 10114 S/N: 10094 Dividing Plate S/N: 10142 for S/N 10094 Power feeder S/N: 10094-1 Tailstock for S/N 10094 S/N: 10094-2 S/N: 10141 S/N:10045 2 flute HSS end mill φ4~16mm 7pcs.set S/N:10037 Mill cluck set S/N:10047 Clamping kit S/N:10046 Indexable carbide end mill S/N:10126 Collet set S/N:10127 Stub milling machine arbor MT#3,ø16mm S/N:10128 Boring arbor with boring cutter MT#3 S/N:10129 Stub milling machine arbor MT#3,ø16mm S/N:10113 Flying Cutter MT#3,φ50mm 9 METALWORKING MACHINE MICRO MULTI-PURPOSE MACHINE Specifications Cutting Swing over bed Distance between centers Spindle taper Tailstock taper Spindle speed Range of threads 140mm 250mm MT#2 MT#1 100~2000 rpm 10% Metric 0.5~1.25mm(5 thread pitches) or lmperial 16-24TPI(5 thread pitches) Drilling and milling Max.drilling/milling capacity Travel of drilling/milling spindle Drilling/milling spindle speed T-slot Output power 10mm 30mm 100~1500rpm 10% 8mm 150 W Net/Gross weight Packing size 40/57 Kg 690x430x615 mm OPTIONAL ACCESSORIES S/N: 10000 Stand S/N: 10004 Cutter 5 pieces set S/N: 10091 Tailstock chuck+shank MT#1,10mm DIN 4971R DIN 4980L DIN 4975 S/N: 10093 Rolling center MT#1 DIN 4981R DIN 4980R S/N: 10094 Rotary table S/N: 10010 4-Jaw chuck ø80mm (independent) S/N: 10094-1 Dividing plate for S/N 10094 S/N: 10015 Lathe dog S/N: 10035 Quick vice Width 50mm S/N: 10069 2 Flute HSS end mill set S/N: 10070 Mill chuck set S/N: 10071 Indexable carbide end mill S/N: 10078 MT#2 collet set S/N: 10079 Face plate ø112mm T-slot 8mm S/N: 10080 Steady rest S/N: 10081 Follow rest S/N: 10082 Vertical slider S/N: 10083 Horizontal slider S/N: 10084 100mm S/N: 10094-2 Tailstock for S/N 10094 S/N: 10108 Vice width 55mm S/N: 10116 Stub milling machine arbor MT#2,13mm S/N: 10117 Boring arbor with cutter S/N: 10118 Stub milling machine arbor MT#2,13mm S/N: 10145 Quick change cutter rest Thread cutting kits Metric z=40,42,45,48,50,54,60 S/N: 10085 Thread cutting kits Imperial z=36,40,42,45,48,50,54, 57,60 S/N: 10086 Wood tool rest wood center S/N: 10087 Ball cutting set S/N: 10088 Headstock center MT#2 S/N: 10089 Tool holder (set of 2) Cut-off Cutter Holder Boring Cutter Holder S/N: 10090 10 Mill chuck set 3,4,5,6mm A classroom for training students’ working skill has established in a high school in Shanghai. METALWORKING MACHINE MULTI-PURPOSE MACHINE Former item No. MJ9526 Model 400/550 Specifications Cutting Swing over bed 250 mm Distance between centers Model 400 400 mm Model 550 550 mm Hole through spindle 20 mm Spindle taper MT#3 Tailstock taper MT#2 Spindle speed (6 steps) 125~2000 rpm Output power 550 W Range of threads Metric 0.4~3.0mm(12 thread pitches) or Imperial 10~44 TPI (8 thread pitches) Net/Gross weight Model 400 125kg/160 kg Model 550 145kg/180 kg Packing size Model 400 1100X660X600 mm Model 550 1200X660X600 mm Standard Attachment ø125mm three jaw chuck ø13mm drill chuck with taper shank Dead center MT#2, MT#3 Gear set Drilling&milling Mill table Mill table Drilling capacity 13 mm End milling capacity 16 mm Face milling capacity 30 mm Drilling & milling spindle taper MT#3 Spindle speed Low range 0~1100 rpm High range 0~2500 rpm Output power 350 W T-slot 12 mm Spindle rotary angle -250 - +450 Weight (Net/Gross) 30/45 Kg Packing size 810 x 420 x 500 mm OPTIONAL ACCESSORIES It’s milling now. If you don’t need the mill head,just bench lathe is C6 Model: 400/550 S/N:10017 S/N:10018 S/N:10019 S/N:10020 S/N:10022 S/N:10023 S/N:10024 S/N:10025A S/N:10026 S/N:10027 S/N:10036 S/N:10037 S/N:10038-45 S/N:10046 S/N:10047 Stand Model 400 Stand Model 550 Steady rest Follow rest 11 pcs. set cutter 10x10 mm Face plate ø220 mm Rolling center MT#2 4-jaw chuck with flange (independent) ø125mm Quick change rest Tailstock chuck dia. 13mm + MT#2 Quick vice 100mm Mill chuck set End mill Indexable carbide end mill Clamping kit 42 pcs. 11 METALWORKING MACHINE Model Width of jaw S/N 10108 55mm S/N 10109 80mm S/N 10110 120mm Model Width of jaw S/N 10111 80mm S/N 10112 100mm S/N 10048 125mm Model Width of jaw S/N 10133 70mm S/N 10142 100mm S/N: 10094 Size 100mm S/N: 10143 Size 150mm Dividing Plate S/N: 10094-1 for S/N 10094 S/N: 10143-1 for S/N 10143 Tailstock S/N: 10094-2 for S/N 10094 S/N: 10143-2 for S/N 10143 Table size (LW) 420203mm X-axis travel 150mm Y-axis travel 200mm T-slot size 12mm S/N: 10095 S/N: 10096 Table size (LW) X-axis travel Y-axis travel T-slot size Worktable w/o auto-feeder Worktable with auto-feeder 38592mm 158mm 300mm 12mm S/N: 10055 Table size (LW) 240145mm X-axis travel 100mm Y-axis travel 200mm T-slot size 8mm S/N: 10137 Table size (LW) X-axis travel Y-axis travel T-slot size 20090mm 70mm 100mm 8mm S/N: 10138 12 METALWORKING MACHINE BENCH CUTTER OPTIONAL ACCESSORY Moveable stand with coolant system Specifications Max.cutting diameter Output power Stroke speed Stroke length Blade size Weight(Net/Gross) Packing size 130mm 250W 82/s 70mm 300x25x1.2mm 68/80Kg 810x420x420 mm S/N:10146 WOODWORKING MACHINE OSCILLATING SPINDLE SANDER Model M1S-370 Specifications Stroke length Max. height of sanding Spindle speed Table size Power Weight (Net/Gross) Packing size 25 mm 100 mm 3000 rpm 370 x 370 mm 180 W 40/42.5 Kg 450 x450x 610 mm Ground cast iron 360x360mm table tilts to 45 . Built-in 50mm dust collection port. Spindle oscillates at 50 stro kes-per-min(50Hz power). Specifications MINI WOOD LATHE Model MCE-450 Swing over bed 152 mm Distance between centers 450 mm Spindle speed (variable speed) 0~2500 rpm Spindle taper MT#1 Tailstock taper MT#1 Output power 250 W Weight (Net/Gross) 19/21 Kg Packing size 710 x 290 x 290 mm Standard attachment Disc 4” MICRO WOOD LATHE Model MCE-300 Specifications Swing over bed 152 mm Distance between centers 300 mm Spindle speed (variable speed) 0~4500 rpm Spindle taper MT#1 Tailstock taper MT#1 Output power 250 W Weight (Net/Gross) 18/20 Kg Packing size 710 x 190 x 290 mm Standard attachment Disc 3” 13
Similar documents
metalworking machine
METALWORKING MACHINE MICRO LATHE Specifications Swing over bed 140mm Distance between centers 250mm Hole through spindle 9mm Spindle taper MT2 Tailstock taper MT1 Spindle speed 100-2000 rpm10% Mo...
More informationEnglish Catalog
w Sturdy metal body. w Ergonomic handle and polymer thumb support for a better grip. w ULTRA lever locking for up to 100 kg of tension to ensure faster blade change. w Simple and precise tension ad...
More informationE-KABİN D SERIES
Note: Order codes of other types of Front Doors can be created by changing last two digits ‘D0’ by desired door type D1 - D2 - D3 - C0 - C1 - C2 - P0 - P1 - P2 Note: C0-C1-C2 refer glazed doors, P0...
More informationmegaphone public address systems
In 2004, We had developed driver unit built with transformer which is combinable with large-diameter horn(reflex horn, trumpet horn). We had also developed the thermostable and abrasion-resistant d...
More information