Design a boot competition

Design Brief
Koalabi Australia is on the hunt for a new boot! This boot can be as
simple or as ‘out there’ as you like. The only limitation is your
imagination.
Aim: to create an amazing new kids boot...
It can have buttons, laces, crystals or even Velcro.
Most importantly - have fun!
Option 1
• Design a boot for a child aged 1-6 years old
• Can be for a boy, girl or unisex
• Height can be either:
-Ultra Short
-Classic Short
Option 2
• Design a boot for someone aged 7 years old and up
• Boot can be for male, female or unisex
• Height can be either:
- Ultra Short
- Classic Short
- Classic Tall
Prize:
The winning design will go into production and the winner
will receive the first pair of the boots they designed (approx.
value $299). The designer’s username will be put on the tag
of the boot.
Ultra Short
Classic Short
Classic Tall
How to Enter

Print out your Design an Ugg Boot information pack and read through it (with
your parent or guardian, if you are under 18 years old).

Using the ugg boot template, start creating your designs.

Once you are ready to submit your design (or designs) fill in the information
entry form.

Send us your design entry form, your design (or designs, if you did more than
one) and your parent’s permission, if necessary.

Send to:
Livewire.org.au
PO Box 101
St Leonards
NSW 1590

Or you can scan and email it to: [email protected];
or fax it to: 02 94374634

All entries must be received by 11.59 pm (AEDT) on Thursday, March 1, 2012.

If you have any questions you can email [email protected].
Good luck!
Back
Side
Front
Livewire “Design an Ugg Boot” Competition
Thursday, February 16, 2012 – Thursday, March 1, 2012
And now for the legal stuff – the rules…
Terms and Conditions
1. The promoter of this competition is Binder Production Pty Ltd, 1 Keys Road, Moorabbin, Victoria, 3189.
2. By entering the Livewire “Design an Ugg Boot” competition, you agree to accept these terms and
conditions. Information about prizes and how to enter form part of these terms and conditions.
3. Entry is open to existing members of Livewire.org.au.
4. The Livewire “Design an Ugg Boot” competition starts on Thursday, February 16, 2012 at 8.00pm and
concludes on Thursday, March 1, 2012 at 11.59pm. The winners will be decided on Friday, March 30, 2012, by
Binder Production management.
5. For your chance to win the first pair of ugg boots produced from your own design (valued at $299), submit
your design by the due date. Please note that there is no element of chance, as this is a skill based
competition.
6. All valid entries will be entered into the competition. Binder Production Pty Ltd accepts no responsibility
for late or lost entries.
7. Binder Production Pty Ltd may decide entries that do not comply with these terms and conditions are
invalid.
8. The winners will be sent their prize within six months of being told of their win (due to production and
development times). Total prize value is $299.
9. The winners will be told within seven days of Friday, March 30, 2012 by email and/or by phone. The
winner’s username will also be posted on livewire.org.au.
10. The Judges’ decision is final and no correspondence will be entered into.
11. The prizes cannot be transferred and cannot be redeemed for cash.
12. Binder Production Pty Ltd reserves the right to request the winners to provide proof of identity and proof
of residency at the nominated prize delivery address. Identification considered suitable for verification is at
the discretion of Binder.
13. Binder Production Pty Ltd accepts no responsibility for any loss or damage whatsoever which is suffered
(including but not limited to direct or consequential loss) or for any personal injury suffered or sustained,
as a result of the prize except for any liability which cannot be excluded by law.
14. Binder Production Pty Ltd may cancel, suspend or vary the competition if for any reason it is not capable of
being conducted as planned, subject to the approval of the NSW Dept of Gaming & Racing, and ACT
Gambling and Racing Commission.
15. If the winning design is in deemed incompatible or unsuitable for production as is, Binder Productions will
work with the winner of the “Design an Ugg Boot” competition to re-develop their design to a quality
suitable for production.
16. All non-winning entrants will receive a Livewire prize pack to the value of $20.
17. All entries must be original works that do not infringe the rights of any third party.
18. All entries become the property of Binder Production, and grants Binder Production Pty Ltd, its affiliates
and sub-licensees a non-exclusive, royalty-free, perpetual, worldwide, irrevocable, and sub-licensable right
to use, reproduce, modify, adapt, publish and display such content for any purpose in any media, without
compensation, restriction on use, attribution or liability. Entrants agree not to assert any moral rights in
relation to such use and warrant that they have the full authority to grant these rights.
Entry Form
Please fill in this entry form and return it with your design before 11:59pm on March 1,
2012.
Return entry form and your design to:
Livewire.org.au
PO Box 101
St Leonards NSW 1590
Or you can scan and email it to: [email protected];
Or fax it to: 02 94374634
Livewire Username: .................................................................................................................
Age: ...........................................................
The name of your boot design: ................................................................................................
Which option have you chosen? (Please circle)
Option 1
Option 2
What height have you chosen? (Please circle)
Ultra Short Classic Short Classic Tall
I, ......................................................................................, hereby agree to all terms and
conditions.
I, ......................................................................................., the parent/ guardian of the
livewire.org.au member above, give them permission to take part in the Livewire
Design an Ugg Boot competition.
Parent/ guardian signature: .....................................................................................................