AFS(HID) Head Lamp replacement for Lexus ES350

A F S ( H I D) H e a d L a m p re p l a ce m e nt fo r
Lexus ES350 2007-2009
• The system has passed
stringent environmental and
reliability tests including but not
limited to:
• TYC AFS Headlamp (Adaptive Front Lighting System)
meets SAE FMVSS108, and receives patents for the head
light turning mechanism (TW I340701, CN 777684).
- Heat & Cold Impact Test from 80
to -40 degree celsius
• Automatic adaptive mechanism, software. circuit
design, and communication interface were all selfdeveloped by TYC. Using the inputs of turning angle and
speed of the vehicle, the software determines the most
desirable lighting type, intensity and scope.
• The outputs of the software are then used to activate
moters that direct the head lamps to the most suitable
area to aid the vision of the driver when the vehicle moves
through curves in the road, to a maximum of 15 degrees
horizontal swivel angle.
- Driving more than 360 thousand
cycles with voltage from 10 V to 15V
• The System also automatically
adjusts the vertical angle of the
headlamp based on the pitch angle
of the vehicle due to loading up to
4 degrees.
• The AFS can be adapted to meet
ECE standards and any additional customer specific requirement
LED Head lamp replacement for
Audi A4 2004-2007
• TYC’s LED Head lamp with DRL was the first worldwide
LED powered headlamp for the aftermarket (Audi A4).
The headlamp complies with ECE (R112 headlamp, R87
DRL, R7 front position lamp, R6 front direction indicator
lamp (incandescent)).
• This LED headlamp offers the most reliable solution for
drivers who want the best performance in terms of both
road illumination and visibility to oncoming traffic. •
Low beam:
- Uses 3 OSRAM OSTAR Head Lamp LED’s.
- The unique triple projector appearance meets ECE R112 regulation.
- No high voltage circuit design, nor color fading due to aging. (When comparing to HID light source)
- Power saving system and reliable lifetime
guarantee when comparing to other light source (Halogen
500-1,000 hrs., HID 3,000 hrs.).
This model is designed to meet the ECE standards while
exceeding 10,000 hrs. of service.
• LED DRL:
- Reliable OSRAM SMD LED unit.
- Meet ECE R87 regulation
- Saves power and longer life over incandescent bulbs.
- More Safety during daytime driving.
• LED Position:
- Dual function LED unit functions as both DRL and Position light.
- When the low beam turning on, the intelligent headlamp system automatically switches the LED unit from the higher intensity DRL to the low brightness needed to meet position lamp function.
- Meets ECE R7 - Saves power and longer life over incandescent bulbs.
• NEW Designs.
- All functions, including Turn Signal and High Beam, can be produced in either FMVSS/SAE or ECE versions using LED’s to gain the full benefit of power savings and long life
LED Light Guide replacement for
B M W 1 S e r i e s E 8 7 2 0 0 7 - 2 0 1 1 Ta i l
Lamp
• TYC’s LED Light Guides can be designed to conform
to SAE, ECE, JIS regulations among others.
•
Light Guide designs and types utilized as:
- Bottom Lighting
- Edge Single-side Lighting
- Extrusion Double-side Lighting
- Free-form Surface Reflection
•
Designs have Passed Environmental Standard Tests:
- Over Voltage Test
- Temperature and Humidity Test
- Long-term Lighting Test
- Heat & Cold Impact Test
- Vibration Test
• Patents:
- Total Internal Reflection Light Guide (TWM289188, M389220, M344272)
- Extrusion Light Guide (CN 1847305)
• Harshness to the eyes of typical lighting is avoided.
LED Light Guide replacement for
Ford Taurus 2010-0n Bumper Lamp
• Light Guide design for Position lighting function
•
Designs have Passed Environmental Standard Tests:
- Over Voltage Test
- Temperature and Humidity Test
- Long-term Lighting Test
- Heat & Cold Impact Test
- Vibration Test
Daytime Running Lamp replacement for
Ford Mondeo 2011 - on
• Intelligent headlamp systems enable the DRL to be
automatically turned on when the vehicle is started,
and brightness reduced to that of a position function
when the low beam function is activated.
• TYC’s DRLs are equipped with OSRAM LED’s and is
ECE (R87) certified
• Safety is increased by enhancing the conspicuity of
the vehicle during daylight conditions.
• The outstanding heat dissipation design enables DRL to
withstand 105° ambient heat.
• Longer life and reduced power consumption when
replacing 55W Halogen bulb to 6W LED set.
- Also withstands Heat & Cold Impact Test and 5,000 hours Lighting Test. The latter being more severe than the typical OEM 2,000 hours requirement.
• The excellent quality is assured by using several
automated inspection instruments in the production
process.
• The DRL can be adapted to meet SAE (J575E),
China Compulsory Certification, RoHS regulations and
any additional customer specific requirement