CNC Precision Machining - Embree Industries Limited

CNC Precision Machining
Quality, Service
On Time Delivery
Competitive Pricing
Product ID & Marking
Solutions
151 Birge Street
Hamilton, Ontario L8L 3L6
TEL 905-529-7187 1-800-267-5791
TEL: 905-529-7187
1-800-267-5791
www.embreeindustries.co
Fm
AX 905-528-6747
Page 0
[email protected]
Table of Contents
TAGS & NAMEPLATES
TAGS AND NAMEPLATES
page 2-6
Shapes:
 Round
 Oval
 Rectangle
 Oblong
 Miscellaneous
 Pet Licence & Rabies Tags
 Cremation Tags
Light Gauge Embossed Tags
Nick & Notch Tags
Printed Tags
 Paper Covered
 Bare Metal
Embossed Pole Tags
Licence Plates
Banding Tags
Custom Nameplates
 Anodized
 Etched
Fastening Devices & Accessories
7
8
9
10
11
12
13
14
ENGRAVING
Laser, Rotary, Diamond Drag
15
STAMPS / HOLDERS
Hand Stamps
Hand Stamp Holders
 MultiLine Holders
 Priority Grips
Interchangeable Steel Type
Type Holders
Custom Engraved Dies
Numbering Units
Custom Packaging Type
16
17
18
19
20
21
22
OTHER PRODUCTS
Stencils
Traditional No.1 Corporate Seal Press
Custom Machining
TEL: 905-529-7187
1-800-267-5791
23
24
CNC PRECISION MACHINING
25-26
FAX 905-528-6747
[email protected]
Page 1
Standard Metal Blanks
Standard Metal Blanks
Tags are available blank, stamped, embossed, engraved and pad printed. Customized text is available, but
by quote only.
Uses:





Valve Tags
Property Tags
Check Tags
Water/Gas Tags
Cremation Tags
Material With Standard Thickness:





Copper .020
Brass .032
Stainless .024 and .047
Fibre (colours: red, black and grey) .0625
Aluminum (colours: red, blue, green, yellow, black, clear) .032
Standard Round Blanks
PART NUMBER
SIZE (DIA. INCHES)
HOLES
HOLE SIZE
A-900
M-712
A-1000
13/16
7/8
1
None
1
1
N/A
1/8
3/16
A-1001
M-711
1-1/4
1-1/4
1
1
1/4 , 3/16
3/16
A-1002
A-1003
C-1006
MX-310
D-1005
1-3/8
1-1/2
2
2-1/2
2-11/16
1
1
1
1
1
3/16
3/16 , 3/8
1/8 OR 1/4
1/4
3/8 , 3/16
E-1007
3-3/16
None
N/A
Standard Oval Blanks
PART NUMBER
SIZE (INCHES)
HOLES
HOLE SIZE
M-759
A-1010
3/8 X 1-1/2
5/8 X 1-1/2
2
2
1/8
1/8
M-763
A-1011
A-1014
13/16 X 1
15/16 X 2-1/4
1-1/16 X 1-3/8
1
2
2
1/8
1/8
3/16
A-1013
1-3/16 X 1-3/4
2
1/8 , 1/16
B-1015
C-1016
M-214
1-3/8 X 2-1/8
1-5/8 X 2-1/8
1-3/4 X 2-3/4
2
2
2
1/8
1/16
1/16
TEL: 905-529-7187
1-800-267-5791
Standard
Hole
Locations
Standard
Hole
Locations
FAX 905-528-6747
[email protected]
Page 2
Standard Metal Blanks
Standard Metal Blanks (continued)
Tags indicated with asterisk (***) are flexible as to
length. Length’s over 3” can also be made to
accommodate individual requirements.
Standard Rectangle Blanks
PART NO.
SIZE (INCHES)
HOLES
HOLE SIZE
M-522
A-1022
B-1024
B-1026
7/8 X 2
1X2
1 X 2-1/2
1X3
2
2
1
2
1/8
1/8, 1/4, 3/16
1/4
3/16
B-1033
1-1/16 X 2-9/16
2
1/8
B-1034
C-1027
C-1036
D-1029
1-1/2 X 2
1-1/2 X 2-1/2
1-1/2 X 3
1-3/4 X 3-1/2
2
1
2
1
1
1/8
1/4
1/4
5/16
E-1038
1-3/4 X 5
4
3/16, 1/4
M-660
M-840
D-1037
2X2
2 X 2-3/4
2X3
1
1
1
3/8
3/8
5/16
SP-1045
E-1039
E-1040
E-1028
SP-1041
2 X ***
2-1/4 X 3-1/2
2-1/4 X 5
2-1/2 X 4-1/2
2-1/2 X ***
4
2
2
1
1
3/16
3/16
3/16
1/4
3/16
TEL: 905-529-7187
1-800-267-5791
Standard Hole
Locations
FAX 905-528-6747
[email protected]
Page 3
Standard Metal Blanks (continued)
Standard Metal Blanks
Standard Oblong Blanks
PART NUMBER
SIZE (INCHES)
HOLES
HOLE SIZE
A-1029
3/8 X 11/16
None
N/A
A-1032
3/8 X 2-3/8
2
1/8
A-1031
A-1021
A-1030
1/2 X 2-1/4
5/8 X 1-3/8
5/8 X 1-3/4
2
1
1
1/8
1/4
5/16
Standard Hole
Locations
Miscellaneous Blanks
PART NUMBER
SIZE (INCHES)
HOLES
HOLE SIZE
A-1012
B-1063
A-1064
C-1070
A-1065
7/8 X 1-7/8
1-3/8 X 1-7/8
1-3/8 X 1-3/8
1-1/2 X 2-7/8
1-3/8 X 1-3/8
1
None
1
1
1
1/4
N/A
1/8
3/16
1/8
Note: Tags supplied with indented characters can be supplied with
or without paintfill.
Custom lettering with fixed or sequential numbers, logos and other
customization available by quote. Please ask!
TEL: 905-529-7187
1-800-267-5791
FAX 905-528-6747
[email protected]
Page 4
Pet Licence & Rabies Tags
Pet tags are made from metals thicker than .020. The heavier guage allows for stamping into the metal with
steel type. These custom shapes are commonly used for licencing.
Uses:

Municipal Cat & Dog Licences/Rabies Tags
Materials:



Aluminum - .050 available in red, blue, green, orange and natural finish
Brass - .032
Stainless steel - .032
Sizes:

Standard shapes are pictured below – custom shapes are available on request.
706
710
708
649
The shapes above are commonly used by vaccine companies for rabies identification. Municipalities ordering
tags for licencing are urged to choose one of the shapes as shown below.
707
709
373
705
MARKING METHOD
Text:
Order blank or stamped (recessed lettering). Character sizes are 1/16, 3/32 or 1/8” high. Consecutive
numbers, up to 6 digits are available 3/32 or 1/8” high. Logos, special graphics, custom shapes and
imprinting on front and back by quotation only.
Packaging & Attachments:


Standard packaging: 100 tags strung onto a wire with your choice of “O” ring or “S” hook
Strip packaging: One tag and your choice of “O” ring or “S” hook sealed in a plastic bag. Bags are
in a continuous strip of up to 500/box, perforated for easy separation.
TEL: 905-529-7187
1-800-267-5791
FAX 905-528-6747
[email protected]
Page 5
Cremation Tags
For attachments see page 14 for appropriate Fastening Device
Identification/Crematory Tags
Cremation Identification Tags are designed for use in crematoriums. Made from 18 gauge, 304 stainless
steel they easily withstand the cremation process. These tags are used and designed to identify and track
remains; thus providing a unique permanent means of identification.
Sizes:


Part Number A1001-S, 1-1/4” dia c\w one 3/16” hole
Part Number A1003-S, 1-1/2” dia c\w one 3/16” hole
Note: Our A1003-S, allows for a larger numbering sequence for facilities that might require same. Other
shapes, if so desired can be chosen from our list of standard metal blanks.
A1001
A1003
Specifications:



Wording : Up to 3 lines (16 spaces each MAX)
Numbering: 1 line of up to 6 sequential numbers
Quantity: 250 minimum
LOGOS, SPECIAL TEXT AVAILABLE ON CREMATION TAGS BY QUOTE
Processing Blades
Available for your processing pots, are heavy duty stainless steel blades for the easy reduction of your
cremated remains.
TEL: 905-529-7187
1-800-267-5791
FAX 905-528-6747
[email protected]
Page 6
Light Gauge Embossed Tags
Embossed Tags are made from metals .008 to .020 thickness. The thin material is ideal for embossing
permanent raised letters. Embossed characters remain legible, even when painted over or soiled. These
tags will withstand abrasion, moist environments. Good for indoor and outdoor use. Rounded corners allow
for safe handling.
Uses:



Identify parts or equipment
Identify bundles, reels and coils
Asset/serial number tags
Materials:




.008 aluminum
.008 electro-galvanized steel
.008 enamel coated steel (available in 3” widths in these colours: red, orange, yellow, green, blue
and white)
Other materials available by request
Sizes:


Widths: 2”, 2-3/16”, 2-1/2” or 3”
Lengths: 2” to 7”
Holes/Slots:
1 or 2 end holes or strapping slots
Sizes of round holes: 1/8”, 3/16”, 1/4”, 5/16”, 3/8”
Sizes of slotted holes: 1/4” x 13/16”, 1/4” x 1-3/8”
Text:
Tags can be ordered blank, embossed or debossed. Text is created by pressing metal tags between a mated
male / female die. This displaces the metal to create raised (embossed) or recessed (debossed) letters.
Consecutive embossed numbers up to 7 digits available – character sizes 3/16”, 1/4” or 3/8”
LOGOS or SPECIAL TEXT AVAILABLE BY QUOTATION
For attachments see page 14 for appropriate Fastening Device
TEL: 905-529-7187
1-800-267-5791
FAX 905-528-6747
[email protected]
Page 7
Nick & Notch Tags
Nick and Notch tags allow the end user to efficiently batch-print tags as needed. They are supplied in a coil
format, for use in both manual-feed and auto-feed machines. Scored (nicked) tags can be separated into
individual tags and the rounded corners (notch) allows for safe handling.
Uses:



Identify raw materials
Record and track work in progress
Identify finished goods
Materials:




.008 aluminum
.008 electro-galvanized steel
.008 enamel coated steel (only available in 3” widths in these colours: red, orange, yellow, green,
blue and white)
Other materials available by request.
Sizes:


Widths: 2”, 2-3/16”, 2-1/2” or 3”
Lengths: 2” to 5-3/4” in 1/2” increments
Holes/Slots:
1 or 2 end holes or strapping slots
Sizes of round holes: 1/8”, 3/16”, 1/4”, 5/16”, 3/8”
Sizes of slotted holes: 1/4” x 13/16”, 1/4” x 1-3/8”
Text:
If fixed wording is known at time of order, specify embossed (raised) letters and or consecutive numbering
sequence. Consecutive numbers up to 6 digits, 3\8” high are available.
LOGOS or SPECIAL TEXT AVAILABLE BY QUOTATION
For attachments see page 14 for appropriate Fastening Device
TEL: 905-529-7187
1-800-267-5791
FAX 905-528-6747
[email protected]
Page 8
Printed Metal Tags
Printed tags are available in two different styles. First is a tag with an electro-galvanized core, covered with
white paper which provides a durable tag that will not tear or wrinkle, the second is a bare metal tag available
in various colours most suitable for colour coding. These type of tags typically have information printed in a
form-style layout. Variable information can be hand written onto the tag with a marker, a hand stamp or
mechanically marked by embossing.
Uses:




Identify raw materials
Record and track work in progress
Identify bundles, reels and coils
Warning, Shipping and Instruction Tag
Tags are also available blank
with or without brass eyelets.
Materials:



.008 electro-galvanized steel
.008 enamel coated steel (only available in 3” widths in these colours: red, orange, yellow, green,
blue and white)
Other materials available by request.
Sizes:


Widths: 2”, 2-3/16”, 2-1/2” or 3”
Lengths: 2” to 5-3/4”
Holes:
1 or 2 end holes or strapping slots
Sizes of round holes: 1/8”, 3/16”, 1/4”, 5/16”, 3/8”
Sizes of slotted holes: 1/4” x 13/16”, 1/4” x 1-3/8”
Attachments: 1 or 2 Brass eyelets 1/8” dia
Tying wires .015 x 15” long (supplied unattached)
Text:
Tags can be ordered blank or printed. Obtainable with one or two colours printed on front or back. The paper
and bare metal surfaces accepts ink readily which allows for clear legible characters as small as 1/16”. The
printing colours available are: red, orange, yellow, green, blue, brown or black. Embossed sequential
numbering available on bare metal only.
LOGOS, ADDITIONAL COLOURS or SPECIAL TEXT AVAILABLE BY QUOTATION
For attachments see page 14 for appropriate Fastening Device
TEL: 905-529-7187
1-800-267-5791
FAX 905-528-6747
[email protected]
Page 9
Embossed Pole Tags
Utilities and communication companies use pole tags to visibly mark utility poles. These tags are provided in
aluminum which resists weathering and makes the embossed letters highly legible. The one piece
construction will not separate or crack in extreme temperatures.
Uses:
Identify light standard and utility poles
Equipment and Machinery
Materials:


.020 aluminum
.020 brass
Sizes:


PT1- 5-3/16” x 3-1/8” (oval shaped)
M519- 3” x 10” (this is an adjustable tag – from a minimum width of 3/4” to 1-1/2” and a
minimum length of 3” to 10”)
).
PT1
HALF SIZE
M519
ADJUSTABLE LENGTH
M519
ADJUSTABLE
HEIGHT
Holes:
PT1 – 2 holes 1/8” diameter on 4-7/16” centers
M519 – 2 holes 1/8” on each end
Text:
Embossed (raised) letters and /or numbers are sized to fit. Text and embossed borders are painted black
leaving plate with its natural background. This method offered only on PT1 and PT2. Other colours available
are blue, red or green.
LOGOS, ADDITIONAL COLOUR or SPECIALTEXT AVAILABLE BY QUOTATION.
TEL: 905-529-7187
1-800-267-5791
FAX 905-528-6747
[email protected]
Page 10
Licence Plates
Municipalities that licence motorized vehicles use customized licence plates. Typical information on the
plates includes name of municipality, type of licence, year for which licence is valid and sequential numbers.
Novelty licence plates are also available for groups and organizations by quotation. For stationary plates
validation stickers are offered for the current year.
Uses:
Municipal Licence Plates identifying vehicles may read:
 Taxi, Tow Truck, Limousine, Refreshment Vehicle, Vendor, Driving School, Commercial, Accessible
Taxicab, Dock
Materials:

.024 aluminum – White baked enamel background
Sizes:


LP1- 5-3/8” x 3-3/4”
LP2 - 8-1/4” x 5”
LP1
LP2
NOT TO SCALE
NOT TO SCALE
Holes:


LP1 – 2 slots (3/4” x 3/16”) with a 3/16” center top hole or 4 corner holes 1/8” or 1/4”
LP2 – 4 corner holes (1/8” or ¼”) or slots (1/2” x 1/4”)
Specify one of these standards at time of order
Text:
The size of embossed (raised) letters is determined by the length of the wording. However, for average text
the letters are approx 3/8”- 5/8” high; the text for the year 1/2”. Sequential numbers are 7/8” on style LP1 and
1-7\8” on style LP2. Colour options for border and wording are: Red Blue, Black or Green
LOGOS, ADDITIONAL COLOURS or SPECIAL TEXT AVAILABLE BY QUOTATION.
TEL: 905-529-7187
1-800-267-5791
FAX 905-528-6747
[email protected]
Page 11
Banding Tags
Banding Tags are metal straps for tying, bundling and fastening products difficult to package.
Uses:



Mark cables and valves
Tie together hard-to-organize products for manufacture or inventory
Identify product
Materials:


Aluminum .020 - .032
Brass .015
Styles & Sizes:







BT2 - 5/8” x 5”
BT3 - 1/2” x 6”
BT5 - 7/16” x 6-1/2”
BT6 - 1” x 10”
T1066 - 1/2” x 2- 5\8” ***
T1067 - 1/2” x 5”
***Any length can be supplied over 2-5/8”
Holes:

Slots for wrapping and securing the tag in place are as pictured (not to scale).
Text:
Banding Tags are available blank, embossed, stamped or sequentially numbered
LOGO or SPECIAL TEXT AVAILABLE BY QUOTATION.
TEL: 905-529-7187
1-800-267-5791
FAX 905-528-6747
[email protected]
Page 12
Custom Nameplates
Custom metal nameplates provide permanent visible identification of products. Available with or without
mounting holes or pressure-sensitive adhesive backing.
Anodized Aluminum Nameplates
The aluminum is chemically treated which allows the colour and design to be permanently captured and
sealed beneath the anodic layer of the plate. This process is available for aluminum only. This plate
weather resistant, resists solvents, gasoline, will not peel, chip, flake off or crack regardless of age; making it
ideal for indoor/outdoor applications.
Material:
Aluminum – Available in a wide variety of colour choices. Just Ask!!
Etched & Filled Nameplates
Surface is chemically etched – colour design is then embedded into plate. The plate is then chemical filled
and baked which provides greater visibility in dirty environments. Resists weather, solvents, corrosion, will not
crack peel or chip regardless of age. Ideal for indoor / outdoor applications.
Material(s):




stainless steel
brass
aluminum
copper
This process allows for a variety of colour choices or colour matching. Just Ask!
How to Order:







Size of plates
Material thickness
Round or square corners
Number of colours
Holes or adhesive
Quantity required
Artwork (provided or our design)
TEL: 905-529-7187
1-800-267-5791
FAX 905-528-6747
[email protected]
Page 13
Fastening Devices & Accessories
Fastening Devices are used to attach tags to valves, pump, pipes and other items where a tag cannot be
affixed directly.
Tagging Wire (stainless steel)
Available in 1 and 5lb spools or cut to length. Single strand is 24 ga, triple strand 27ga. Other gauges and
materials are available on request.
Lead Seals With or Without Wire
Lead seals are available in different sizes with or without wire attached; this makes it convenient for the
creation of custom lengths. Lead seal sizes range from 5/16” – 1/2” dia. Lead seals c\w wire are available in
standard length 6 – 12” long (other lengths on request)
Lead Seal Press
Lead seal press crimps wire and disc securely. The discs are supplied blank, but if embossing is required, up
to 4 characters (including space) can be engraved to identify your product code or your company.
“O” Rings, Split Key Rings, “S” Hooks, Jack Links,
These attachments are available in a wide range of sizes. Please ask!!
Spring Sleeve Check Rings
For preventing loss of tags
Ball Chain/Connectors
Ball chain c/w connectors are available in standard lengths 4 – 6” long, in nickel plated steel, brass plated
steel and stainless steel. Ball Chains and connectors are also offered separately for custom made length.
Security Seals/Car Seals
The Security /Car seal is an 8-1\2” long metal tin plated strap. The ball housing uses a crimp lock which
makes it impossible to remove without evidence of tampering. Security seals are supplied with 8
consecutive numbers and also if required up to 20 letters. Other variation of security seals available –
Please Ask!
Metal Packing Slip Holders
Our exclusive metal shipping envelopes are designed to protect vital documents from environmental and
transportation damage. Made from .015 coated steel, they are rugged and rust proof.
TEL: 905-529-7187
1-800-267-5791
FAX 905-528-6747
[email protected]
Page 14
Engraving
Engraving incorporates a wide variety of materials from lamacoid (plastic) to metals . Methods are laser,
rotary and diamond drag. These methods are used to identify parts by engraving labels or directly on the
part.
Uses:







Legend Plates/Panels
Pictograms
Nameplates
Name Badges (magnet or pin back)
Schematic plates
Way-finding Signs
Custom Engraved Signs
Attachment:
Wall & Desk holders are available for nameplates in an office environment.
All holders are highly polished and anodized Bright Rose Gold, Bright Silver or Matte Black.
Custom colours are available by special order - Bronze, Satin Silver, Bright Yellow Gold.
Standard lengths 2” – 12”, custom lengths are available
Laser Engraving
Laser engraving produces a high permanent mark on specially designed laserable materials. This method of
engraving is commonly used for identifying precision machined parts as it does not change the tolerance of
the part marked.
Material(s):
Metals, plastic, glass, wood and novel metal alloys.
Rotary Engraving
Rotary engraving produces 3-dimensional dies and signs using a wide variety of materials.
Material(s):
Metals, plastic, glass, wood and novel metal alloys.
Diamond Drag
This style of engraving uses the actual tip of a diamond tool
to engrave message into the material and scribes fine lines as characters are formed.
Material(s):
Brass, aluminum, decorative glass, plaques
TEL: 905-529-7187
1-800-267-5791
FAX 905-528-6747
[email protected]
Page 15
Hand Stamps
Standard Hand Stamps (in letters and figure sets)
Used for marking all metals. Made from top grade tool steel, heat treated for toughness and durability.
Inspected and tested to ensure 60 Rockwell C hardness. Supplied in sets of figures (0-9) or letters (A-Z)
packed in neat plastic boxes with a separate compartment ensuring rapid selection in use. Letters and
figures are also available individually or in REVERSE for mould work. The engraved character style is
designed to produce a sharp clear impression on your job.
Standard Stock Sizes indicated below:
Character Size
inch
mm
1/16
1.5
3/32
2.5
1/8
3.0
3/16
5.0
1/4
6.0
3/8
10.0
Length
inch
Mm
2-1/2
63.5
2-1/2
63.5
2-1/2
63.5
2-3/4
70.0
2-3/4
70.0
3-1/2
89.0
Width
inch
¼
¼
¼
3/8
3/8
9/16
mm
6.3
6.3
6.3
9.5
9.5
14.3
Height
inch
mm
¼
6.3
¼
6.3
¼
6.3
3/8
9.5
3/8
9.5
9/16
14.3
Custom Hand Stamps:
Steel Hand stamps with your unique design can be custom made to your specifications. For example CSA
logo, company logo, welder’s stamp or inspector’s personal symbol or part number. Listed below is a
sampling of some of the symbols available. For others just ask
Security Style Hand Stamps
These stamps feature stylized numerals that ensures the recognition of the mark even if part of it has been
obliterated.
Lowstress Hand stamps (round face or dotted style)
These stamps are specifically designed for marking materials that might suffer fracture damage from using a
conventional hand stamp with sharp faced gothic characters.
Uses:For making delicate markings on pressurized pipe fittings, couplings, vessels and aircraft parts
Standard stock sizes indicated below:
Lo-Stress
Dot Design
TEL: 905-529-7187
1-800-267-5791
Character Height
1/8” (3.00mm)
3/16” (5.00mm)
1/4” (6.00mm)
5/16”(8.00mm)
Hand Stamp Overall Size
1/4” x1/4” x 2-1/2
3/8” x 3/8” x 2-3/4”
3/8” x 3/8” x 2-3/4”
1/2" x 1/2” x 3-1/2”
Please note other sizes are available, just ask!
FAX 905-528-6747
[email protected]
Page 16
Hand Stamp Holders
Priority Grip
The stamp grip has been designed to avoid damage to the fingers of the stamp user. It firmly holds various
sizes of stamps in its spring loaded throat, allowing a really hard blow to be struck without the risk of jarring.
Specifications:
Holds hand stamps from 1/4” x 1/4"x desired length to 3/4” x 3/4” x desired length.
Multi- Line Holder
Uses: (For Marking)
 Pipes
 Tubes
 Plates
 Large Fabrications
Custom made holders for marking plates. These holders are great for consistent alignment of markings as its
configuration tends to eliminate the errors associated with marking multiple pieces of information like heat,
grade, thickness and customer information. To mark the operator strikes each stamp individually, this
ensures that marks are consistent and in the same location. These holders complete with stamps are
designed to stamp hot or cold metal plates.
Please note our Sales Representative will assist with your Custom layout at time of request.
TEL: 905-529-7187
1-800-267-5791
FAX 905-528-6747
[email protected]
Page 17
Interchangeable Steel Type
Interchangeable Steel Type provides the complete answer to part numbering and general purpose
marking of medium and low volume production work. The type is made from finest quality alloy steel,
hardened and tempered to 59-61 Rockwell “C” to give clear, consistent marking though-out its life span.
Flat Type is rectangular in shape for use in hand holders, presses and rollmarking machines.
Segmental Type is also available but is custom made; this style of type has tapered sides and is mostly
used in rotary holders for machine use only.
The character size is designed to produce the clearest impressions and is identical in form to characters in
our standard numbering heads. Available in single pieces or font sets with or without holders.
The Font Set contains a selection of 100 pieces (see chart) economically chosen to provide for most
needs while avoiding duplication of little used characters. Spacers are included and a hand holder if
required. Each set is supplied in a compact plastic box with tweezers for the smaller sizes.
For characters not shown, please ask
TEL: 905-529-7187
1-800-267-5791
FAX 905-528-6747
[email protected]
Page 18
Type Holders
A wide range of holders are available for use by hand in various presses, roll marking machines etc. They
are all designed to take individual pieces of steel type which are freely interchangeable. The type holders
enable a row of characters to be made up in the holders so that the mark can be indented into the work piece
in one blow or pass of the machine, thereby making a neater mark and saving time. Machine holders can
be fitted with various shank sizes to suit any machine.
Standard Holders –Holders available in various sizes to accommodate quantities as indicated on chart.
The body of the holder is long enough to minimize hitting the hand when holder is struck.
PART NO.
CAPACITY
TYPE SIZE(MM)
TYPE SIZE(INCH)
H3.2.20
12
1.5
1/16
H08.39
12
9
16
12
8
2.5
3.0
2.5
3.0
5.0
3/32
1/8
3/32
1/8
3/16
H9.6.40
6
6.0
1/4
H16.57
6
10.0
3/8
H6.35.29
H6.35.39
Machine Holders – There are various configuration of holders available to suit the different applications
and the length of slot determines the number of individual pieces of type that can be inserted. Any length of
slot not used by type is filled using spacing pieces.
Rotary Holders – Uses wedged (segmented) type to efficiently mark flat or round surfaces. This type of
holder is commonly used in the packaging industry.
Retainers & Backing Plates –Retainers and backing plates may be purchased as a complete set or
individually (we recommend purchase of complete set). For other retainers, backing plates & type please call
for quote.
TEL: 905-529-7187
1-800-267-5791
FAX 905-528-6747
[email protected]
Page 19
Special Holders requiring two or more rows available by quote
Custom Engraved Dies
Dies For Embossing/Debossing
Used in the industry for reproducing permanent, legible raised or sunk lettering. The engraving is positioned
on both male/female die blanks for perfect registration. The engraving has the correct degree of draft to
prevent cutting the metal but permits even movement of the material into the female die, thus producing a
desirable and easily read mark.
Roll Dies for Indenting
These dies are made from special high speed steel, dies “roll your mark” on flat, beveled, concave or
cylindrical surfaces. The rolling action greatly reduces marking pressure. Dies can be manufactured to your
exact specifications for use on standard roll marking machines, screw
machines, CNC lathes or “tool post” holders.
Press Dies For Indenting
Press dies are usually machined with or without shanks, depending upon the equipment which they must
accommodate. All characters are beveled with the proper degree of draft to absorb shock and provide a
clearer impression and longer life.
Branding Dies and Electric Branding Irons
Branding is the most practical way to mark woods, plastics, rubbers and other non-ferrous products. We can
provide electric branding tools or just custom engraved dies. Branding irons are available in both drill press
and hand held style. The slotted head holder is designed to hold interchangeable characters, however there
are many variables involved in selecting an appropriate iron for your branding needs and would encourage
you to call so we can suggest the suitable equipment for your application.
Note all items above have custom features so please call and our Sales Representative will be pleased to
help with your requirements.
TEL: 905-529-7187
1-800-267-5791
FAX 905-528-6747
[email protected]
Page 20
Numbering Units
Manual Hand Held Units
Simply constructed but robust, our hand numbering units are quick and easy to use. Suitable for marking all
metals, many plastics etc. For use by hand and hammer or adapted to a press. Marking wheels can be
rotated to any given position and a complete inscription may be changed in seconds.
Automatic Numbering Head
Press adapted automatic numbering heads are available. These units are versatile where automatic or
manual advance numbering is required to stamp repetitive sequences such as product code, part numbers,
date codes etc.
The chart below shows the actual inscription lengths for the number of wheels and character size required,
using standard style and spacing. The seven standard sizes are indicated in blue on the chart. Other options
shown; readily supplied from standard parts
Tell tales in the wheel grooves shows the actual characters in the marking position (available on most units)
Numbering units with 1.5mm to 3mm characters can be fitted with interchangeable shanks for hand or
machine use. Standard engraved wheels are 0-9 with one blank station. Wheels with letters, symbols or
repeated characters are available by quote.
TEL: 905-529-7187
1-800-267-5791
FAX 905-528-6747
[email protected]
Page 21
Custom Packaging Type









Custom and Packaging Type
We manufacture brass and steel packaging type used for coding, imprinting, labeling, embossing and
debossing. Packaging type is commonly used in the pharmaceutical industry designed for, cartoners,
sealers, fillers and imprinters. Also available with your code dates are custom designed holders (see page
17).
Uses :
Hot or Cold Marking of labels
Marking Tags
Packages
Cartons
Plastic and/or metal surfaces
Material:
Brass
Aluminum
Stainless Steel
Tool Steel
Packaging Type Bodies:
Although it is not practical to detail all type bodies the following are some of the more common shapes. If a
drawing or sample is provided we can manufacture as per your requirements. Material used will be based on
your application and requirement.
Packaging Type Faces
Packaging Type Widths
TEL: 905-529-7187
1-800-267-5791
FAX 905-528-6747
[email protected]
Page 22
Stencils
Brass Interlocking Stencils
These stencil kits are made from durable brass for long lasting service. The characters slide together and
clean up easily with paint solvents. Available in different character sizes in letter, number and combo kits. .
PART NUMBERS
CHAR.
45 PC
77 PC
92 PC
NUMBER LETTER
SIZE
COMBO COMBO COMBO
1/2
10006
10026
10066
10106
10146
1
10008
10028
10068
10108
10148
2
10011
10031
10071
10111
10151
3
10013
10033
10073
10113
10153
4
10014
10034
10074
10114
10154
5
10015
10035
10075
10115
10155
6
10016
10036
10076
10116
10156
Uses:
 Marking Shipping Crates
 Identifying Ramps
 Identifying Floor and Walls with Directional Arrows
 Identifying Areas with Cautionary and Warning Signs
Material:
Sturdy .015 PVC plastic
Stencils cut from this material features large, easy to read symbols. These stencils delivery a crisp clear
marking and are reusable since they clean-up with solvent or soap and water.
Safety & Parking Lot Stencils
To promote safety parking lots, taxiways garages, warehouses, factories , hospitals and schools can be
clearly stencilled for compliance and safety.
PART No.
12430
12431
12432
12433
12434
12435
12436
12437
12438
12439
12441
12460
TITLE/DESCRIPTION
NO PARKING *
HANDICAP
FIRE LANE
EXIT ONLY
RESERVED*
VISITORS*
ARROW STRAIGHT*
ARROW CURVED*
HANDICAP SYMBOL*
ENTRANCE
DISABLED
*INCLUDED IN KIT
CHAR SIZE
12”
12”
12”
12”
12”
12”
8” X 20”
8” X 27”
43” DIA
12”
12”
AS ABOVE.
Custom Stencils
Custom cutting of your stencil with your message or design in brass, steel, copper, plastic or oil-board is
available by quote.
TEL: 905-529-7187
1-800-267-5791
FAX 905-528-6747
[email protected]
Page 23
Traditional #1 Corporate Seal Press
The classic design of the Traditional # 1 Corporate Seal Press makes it an attractive desk model embosser.
A useful addition to any office, the sturdy press is quality crafted in aluminum. Its specially-designed handle
provides consistent pressure on the die allowing better leverage for repetitive jobs. The result is a highquality legible seal impression with little effort, even on heavy-weight documents. A cork base protects the
finest of desk finishes.
Uses:





Stationery and Document Embosser
Identify Library Books
Add a Personal Touch To Gifts
Notarize Important Papers
Certify Original Documents
Users:









Notaries
Corporations
Law Offices
Architects
Engineers
Government Officials
Land Surveyors
Courts
Photographers
Size:






Overall 5” x 6-3\4” x 1-3\4”
Handle 4-1\2 “ from pin to tip
Paper reach is 1-3\8” from center of die to back of throat
Brass Die 1-3\4” diameter
Weight with brass die 1.3 lbs
Brass dies are provided blank with rope border
(personal information added as required)
Finish:
Baked enamel finish black with silver vein.
This is a quality crafted Seal Press made in Canada with 100% Canadian content
TEL: 905-529-7187
1-800-267-5791
FAX 905-528-6747
[email protected]
Page 24
CNC Precision Machining
Embree manufactures Precision Parts for all types of industries such as forest products, power generation,
nuclear, robotics, pressure vessel, pumps, construction, military and all types of manufacturing.
Manual machining, CNC machining, Screw machined Parts
Ranging from prototypes to 1,000’s
Smaller parts up to a max of 80#’s
Light assembly work
Common Materials Include
Carbon steels
Stainless Steels
Titanium
Brass
Other materials by Quote
Tool Steels
Aluminum
Copper
Plastics
30 employees working together to meet our customers requirements for quality parts.
Focus on Quality - ISO 9001:2008 - Certified since 1992
Fulltime inspector and final inspection before shipping
QC/SPC inspection sheets available upon request
Tight tolerances as required
Certified under the Canadian “Controlled Goods Program”
Focus on Service and Deliveries
Knowledgeable customer service that want to earn your business and become one of your dependable
machining suppliers.
Willing to look at stocking programs to reduce lead-times
TEL: 905-529-7187
1-800-267-5791
FAX 905-528-6747
[email protected]
Page 25
Equipment List
Plant :
18,000 sq.ft plant located in Hamilton, Ontario
Continually expanding and upgrading to keep up-to-date
3 CNC Mills
1 Hass VF1 with a 4’th axis
1 Mazak Nexus 510 with a 4’th axis
1 Matsura 760 V
(16” x 28” table)
(20” x 40” x 20” high)
(16” x 28” table)
4 CNC Lathes
1 Mazak Super Quick Turn 15M Mark II with Live tooling
1 Mori Seiki ZL-15S CNC Lathe
1 Nakamura Tome Superturn 4
1 Hyundai
10 Screw Machines
1 No 168 BSA
3 No 136 BSA
3 No 68 BSA
1 No 48 BSA
(2.375” capacity)
(2” capacity)
(1” capacity)
(0.625” capacity)
Manual Machining
Horizontal & vertical mills, 2 lathes, 3 grinders (cylindrical & surface),
and various equipment for secondary operations.
Product Identification
Computerized Laser and router engravers
Pantographs
Stamping presses ranging from 10 – 30 tons
Various equipment for manufacturing all types of product identification products
TEL: 905-529-7187
1-800-267-5791
FAX 905-528-6747
[email protected]
Page 26