Brochure

LIVE ON-SITE
& WEBCAST
AUCTION
WEBCAST
Wednesday, September 16, 2009
Can’t attend the auction in person?
Bid live online at www.BIDITUP.com
Beginning at 10:00am PDT
STAR BUILDING SYSTEMS, 12101 E. Brandt Rd., Lockeford, CA 95237
Preview: Tuesday, September 15, 9:00am to 4:00pm PDT
(Preview Location Is Lockeford, CA Plant Site Unless Otherwise Marked at end of Each Item Description)
EQUIPMENT LOCATED IN LOCKEFORD, CA • TURLOCK, CA • MT. PLEASANT, IA
KERNERSVILLE, NC • SANFORD, NC • OHIO & MICHIGAN
Machinery and Equipment No Longer Required in the Ongoing Operations of:
CECO BUILDING SYSTEMS, STAR BUILDING SYSTEMS, DBCI AND MBCI
MAJOR METAL BUILDING MANUFACTURER
36’
LENGTH
64 TOOLED
STANDS
400 TON PACIFIC HYDRAULIC PRESS BRAKE
PURLIN LINES
SHEET LINES
PANEL LINES
ROLLFORMERS
CUT TO LENGTH LINE
ANGLE IRON LINE
FLANGE BRACE & SAG ANGLE LINE
ANGLE CUT-OFF
BAR PUNCH LINE
I BEAM WELDING LINE
CONNECTION PLATE LINE
DOUBLE WIDE / 4 HIGH SHEET ROLLFORM LINE
FLANGE BEVEL & SPLICE LINES
CNC LASER CUTTING SYSTEM
CNC TURRET PUNCH
PRESS BRAKES
SHEARS
SLEAR LINE
ECONO SLITTER LINE
HYDRAULIC BEAM PUNCH
FABRICATING EQUIPMENT
HYDRAULIC PRESS
BIDITUP AUCTIONS & APPRAISALS WORLDWIDE
www.biditup.com
STRAIGHT SIDE PRESSES
GAP FRAME PRESSES
UNCOILERS
COIL CRADLE-STRAIGHTENERS
CUT-OFF PRESS
TOOL ROOM
COLD SAW
ROLLING STOCK
WELDERS
CRANES
AIR COMPRESSORS
COMPLETE ROLLFORMING LINES
TOOLED FOR PRODUCT LINES FOR METAL BUILDING INDUSTRY
PURLIN LINES: CEES • ZEES • GIRTS • EAVE STRUTS
1999 – METFORM LINE - 8 ½”, 10”, 12” & 14” WEB x 2 ½” – 3 7/16”
LEG - ROLLIX MDL. 1000 Three Arm Coil Turnstile; METFORM
DOUBLE END UNCOILER, Capacity 10,000 Lbs, Width 30” ID
18” – 22”, OD 72”, Dual Hold Down Arm, Hydraulic Expansion,
Pneumatic Brakes; Travelling L-Shape Coil Car; METFORM/BRONX
STRAIGHTENER, 5-Roll Straightener, Width 30”, Entry Pinch Rolls
– Pneumatic Lift; BRONX Five Station Hydraulic Punch Press
w/Seven Die Set and Crop Shear; TRICOOL ENGINEERING
CHILLER, MDL. 992003s2/160, S/N 180/S2/1311; METFORM
12 STAND ROLLFORMER, MDL. AUTOJUST 2000, S/N 350016,
Horizontal Centers 47”, Vertical Centers 16.9”, 80HP Drive Motor;
Servo Motor Width and Height Adjustment, DUAL 3 STAND &
5 STAND EAVES SECTION W/Programmable Job Capability &
Power Adjustment of Rollspace for Eaves Beam & Angle Weld;
Discharge Table; CNC Control
1999
EAVES BEAM & ANGLE WALL SECTION
TURNSTILE, CAR, DOUBLE END UNCOILER, STRAIGHTENER
PRE NOTCH PRESS
ROLLFORMING SECTION
–2–
TO SCHEDULE AN AUCTION OR APPRAISAL, CALL 818.508.7034
COMPLETE ASC RAFTED CEE, ZEE & EAVE
STRUT LINE - 6¾”, 8½”, 8¾”, 10” & 10¼” WEB x
2½” – 3¼” LEG - Three Arm Coil Turnstile; 20,000
Lb ASC Uncoiler, Mdl. SAU20M48H1821H150,
Job #13144.000, Mandrel Width 48”, ID 18” – 21”,
OD 60”, Adjustable Base, Brake, Jog Drive,
Motorized Hold Down Arm, 10 HP Hydraulic
Drive; Coil Car – Mdl. 10M Coil Car L Shaped,
Job #1147 M-231; Straightener/Feeder, 5-Roll
Straightener, Indramat Drive; 11 Die Gag Sets for
Profiles; ASC CNC 500 Third Generation Control;
Entry Guide; ASC PURLIN Punching System - 10
Station Punch & Cut-Off Press, Job #15576; 60
HP Motor & Hydraulic Pump; SHEAR END
WELDER - Miller Syncrowave 250 AC/DC Power
Welding Source, Miller Coolmate 4 Water Coolant
System; ASC FEEDER- STRAIGHTENER, Width
26”, Indramat Drive; 12 Stand ASC RAFTED
Rollformer, Mdl. U5-26-12 Roll Former LH, Job
#1151, Shaft Diameter 3”, Rollspace 26”,
Horizontal Centers 23”, Vertical Centers 7 ½” – 11”,
ASC #5 Stands, ASC Size 50A/Series 295 Gear
Boxes, Universal Drive Arms, 75 HP Motor; 130ʼ
Run Out Conveyor
PURLIN PRE-HEAT &
VACU-PAINT LINE - NEW 2004
ENERGY SERVICES GROUP
MDL. 46043 PRE-HEAT
FURNACE SYSTEM; Capacity
2,000,000 BTU/Hr; S/N
02MBTU; VAC-U-PAINT PAINT
SYSTEM, MDL. VD395;
KICK-OFF CONVEYOR;
DRYING RACK CONVEYOR;
PURLIN DRYING BOOTH;
PURLIN POST HEATER
SYSTEM, MDL. WX110200,
S/N 05162848-001-1
2004
(To be sold via photo - Located in Iowa)
UNCOILER & COIL CAR
ASC PRENOTCH & CUT-OFF PRESS
12 STAND ASC RAFTED ROLLFORMER
RAFTED STANDS W/PURLIN TOOLING
1999 - BRADBURY DTR DOUBLE TELESCOPING ROLLFOMER,
DOUBLE WIDE CEE, ZEE STRUT LINE – 3 7/8” – 12” WEB X 1
5/8” TO 3 ½” LEG; DUAL 12 STAND BRADBURY ROLLFORMERS,
MDL. 425DTR DUAL 75 HP DRIVE, ASC CNC Control, Horiz.
Centers 18” (Stands 1-4), Horiz. Centers 21-1/2” (Stands 5-12)
Hydraulic Ball Screws, S/N 34164
1999
PRO-ECO – 8” – 13” WEB X 3” – 5” LEG PURLIN ROLLFORMING
LINE; Dual Stand 16 Opposed Stub Mandrel Roll Former, Mounted
on Traversing Base (To be sold via photo - Located in Ohio)
BRADBURY – 6 ½” & 8 ½” WEB – SIDE BY SIDE DUPLEX
COMBINATION RAFTED MILL, MDL. 425, 12 Stand & 14 Stand,
Shaft Diameter 3 ½”, Width 24”, Horizontal Centers 22”, Vertical
Centers 6” – 14”, Center Universal Driven, S/N 15386
(To be sold via photo - Located in Ohio)
New Cost
$625,000
BRADBURY DTR DOUBLE TELESCOPING ROLLFOMER
Register at www.BIDITUP.com and receive auction updates via email
–3–
SHEET LINES
SHEET LINE
DOUBLE WIDE / DOUBLE HIGH – 4 PROFILE MACHINE WITH 64 TOOLED
STANDS SHEET LINE MANUFACTURES MITCHELL ARCHITECTURAL PANEL
LINE (MAP), MITCHELL INTERIOR PANEL LINE (MIP), MITCHELL SHADOW
LITE PANEL LINE (MSP), MVR PANEL LINE, MVW PANEL LINE & MSP PANEL
LINE 20,000 Lb American Steel Line Uncoiler, Mdl. 1000, Width 42”, ID 19” – 24”,
OD 60”, Coil Car & Upender, Jog Drive, Backing Plate, Hold Down Arm, S/N 7499;
Coil Accumulator; MITCHELL Straightener, Entry & Exit Pinch Rolls, 3-Roll Straightener;
MITCHELL Pneumatic Shear, Width 54”, Pivots for Bevel Cut; Belt Conveyor with
Height Adjustment for Changing Material Passline; 16 STAND MITCHELL
ROLLFORMER, Rollspace 48” & 44”; Horizontal Centers 20”, Vertical Centers 7” – 11”,
Side-by-Side Rollformers – each with two Production Levels; ASC CNC-500 Third
Generation Controls, Lateral Base Adjustment to Switch Production Line;
Drop Out Conveyor & Exit Conveyor System (To be sold via photo - Located in Iowa)
AMERICAN STEEL LINE UNCOILER / CAR / UPENDER
OFFLINE PROFILE SHEAR
MSP OFFLINE SHEAR - FAMCO MDL. 152, Width 50”,
Entry Conveyor, S/N S-B5ZU50
SHEET LINE PRODUCT OFFLINE SHEARS
MIP OFFLINE SHEAR – FAMCO MDL. 142, Width 42”,
Entry Conveyor, S/N SB5ZU70
(To be sold via photo - Located in Iowa)
MAP OFFLINE SHEAR – NIAGARA MDL. 562,
Back Gauge, (To be sold via photo - Located in Iowa)
MVW OFFLINE SHEAR – TENNSMITH
MDL. A52, Width 52”, Back Gauge, Pneumatic Shear,
S/N 13348
(To be sold via photo - Located in Iowa)
64 TOOLED
STANDS
MITCHELL 4-PROFILE ROLLFORMER TOOLED FOR MIP, MVW, MAP & MSP PROFILES
–4–
(To be sold via photo - Located in Iowa)
TO SCHEDULE AN AUCTION OR APPRAISAL, CALL 818.508.7034
COMPLETE STANDING
SEAM/ROOF PANEL WALL PANEL LINES
COMPLETE 24” STANDING
SEAM LINE MANUFACTURES
STS PANEL PROFILE /
STARSHIELD ROOF PANEL
20,000 Lb ASC Uncoiler,
Machine SAU-20M48H1821.5H,
Width 48”, ID 18” – 21”, OD 60”,
Hydraulic Drive & Expansion,
Job #10141; ASC Brake &
Hump Feed Roll Assembly, Job
#10108; 20 Ton ASC Hydraulic
Prenotch Press, Job #10105;
ASC Brake & Hump Feed Roll
Assembly, Job #10110; ASC
Rafted Rollformer, Mdl.
U4-48-14, Rollspace 48”, Entry
Guide, Horizontal Centers 18”,
40 HP Drive, ASC 40A Gear
Boxes, S/N 551; Graco Sealant
Pump, Mdl. 217-579; ASC
CNC-500 Fourth Generation
Controls; Drop Out Conveyor
& Exit Conveyor System
COMPLETE STANDING SEAM
LINE MANUFACTURES 24” CXP
PANEL LINE & 24” CLP PANEL LINE
20,000 Lb ASC Uncoiler, Machine
SAU-20M-48H 1821 H200, Width
48”, ID 18” – 21”, OD 60”, Hydraulic
Drive & Expansion, ASC Vee Type
Coil Car, 10 HP Motor & Hydraulic
Pump, Job #JN-16501.000; ASC
Feeder-Straightener, Width 48”,
Job #6098; ASC 35 Ton Hydraulic
Gag Punch Press w/Gag Dies, Job
#15238; ASC Hump Table & Pinch
Roll Assembly; 18 STAND
ARDCOR ROLLFORMER, MDL. 1
½ FU, Rollspace 42”, Shaft
Diameter 3”, Horizontal Centers
16”, Vertical Centers 5 ½” – 10”, 50
HP Motor; 17 STAND ASC ROLL
FORMER, MACHINE CAS-4-30-17
RH, Rollspace 36” Wide, Horizontal
Centers 23”, Vertical Centers 6 ½”
– 9”, ASC #4 Stands, Job #8030
M-001.44; Lateral Base Adjustment
to Switch Production Line; GRACO
PUMP for Sealant Applicator;
LEWCO Roller Conveyor & Drop
Out Conveyor System
(To be sold via photo - Located in Iowa)
SOULE ROOF PANEL RAFTED TOOLING
SECTIONS – TOOLING SET FOR LOS ANGELES
INTL. AIRPORT ROOF PANEL REPLACEMENT
36” DURARIB PANEL LINE – 20,000 LB.
AMERICAN STEEL LINE UNCOILER,
MDL. 1000, Width 48”, ID 16” – 21”, OD 60”,
Hydraulic Expansion, S/N 7269; L-Shape Coil
Car; 14 Stand BRADBURY ROLLFORMER,
Mdl. 3 ½ - 7 – 18, Entry Guide, S/N 14218;
Hydraulic Cut-Off Press; Run-Out Conveyor;
ASC CNC-500 Third Generation Control
ARDCOR ROLLFORMER
ASC ROLLFORMER
COMPLETE STARMARK & TWINRIB LINE –
BRADBURY UNCOILER, Width 48”, ID 16” – 20”,
OD 60”, Hydraulic Expansion, Hydraulic Drive;
ASC 24 STAND RAFTED ROLLFORMER, MDL.
U4-60-24; Rollspace 60”, Horizontal Centers
24”, Vertical Centers 7 ½” – 12”, Entry Guide,
ASC Size 40A Gear Boxes, Universal Drive;
20 TON ASC HYDRAULIC FLYING SHEAR,
Between Posts 56”, Job #14002; Drop Conveyor/
Stacker Conveyor; Transfer Conveyor; ASC
CNC-500 Third Generation Control
COMPLETE I BEAM WELDING LINE
COMPLETE CONRAC 60” I BEAM WELDING LINE SEAM ENTRANCE CONVEYOR; CONRAC SEAM WELD STATION MDL.
104, S/N 84459-72A; INVINCIBLE FLUX VACUUM SYSTEM; LINCOLN DC600 WELD POWER SUPPLY W/NA5 CONTROL & TC3
WIRE FEED; FLANGE WELD STATION; CONRAC PULL-THROUGH WELD STATION - HORIZONTAL CONTINOUS BEAM
WELDER, MDL. AWM-102, Capacity – Web Width 5 ½” – 60”; Web Thickness 1/8” – 3/8”; Flange Width 4” – 15”; Flange Thickness
3/16” – 1”; Weld Speed 20 – 120 IPM; Flux Vac Pick Up; (2) LINCOLN DC1000 WELD POWER SUPPLY UNITS W/NA5 CONTROL
& Invincible Flux Vacuum System, Mdl. 482; Entrance, Pull Through & Exit Conveyor Systems
CONRAC 60” BEAM WELDING LINE w/Dual DC1000 Welding Power Supply Units, Four Wire System w/Lincoln NA-5 D
Arc Welding System (To be sold via photo - Located in Turlock, CA)
2004 – ASC GARAGE DOOR PANEL LINE, MDL. CAS4-30-18,
18 Stand Rollformer, Rollspace 30”, Shaft Diameter 3”, Horizontal
Centers 18”, Vertical Centers 5” – 9 ½”, Ran 18” & 21” Garage Door
Panels, Job #18375
GARAGE DOOR PANEL LINE
(To be sold via photo - Located in Rancho Dominguez, CA)
18 STAND LOCKFORMER DUPLEX ROLLFORMER, MDL. 18D,
Rollspace 6” – 36”; Shaft Diameter 1 ½”, Horizontal Centers 8 ¼”,
Vertical Centers 4 ¾”, Capacity 24 Gauge, S/N 18D1113
ROLLFORMER
(To be sold via photo - Located in Los Angeles, CA)
20,000 LB. GIFFORD HILL/ASC UNCOILER, Machine
20S48D20/3H 200 Uncoiler, Width 48”, OD 60”, Hydraulic Drive,
Hydraulic Expansion, Job #4187; GIFFORD HILL/ASC NIP Roll
Tower (Hold Down Arm) & Pinch Roll Drive; Threading Table;
GIFFORD HILL/ASC Straightener, Width 26”, 5-Roll Straightener,
Job #4188; GIFFORD HILL/ASC 40 TON PULL DOWN PRESS,
Between Posts 26”, Stroke 1 ¾”, Air Clutch & Brake, Job #4189;
ASC SIX TON HYDRAULIC SHEAR, Width 50”, Job #15585,
Run-Out Conveyor – 30ʼ x 26”; ASC CNC 500 Third Generation Controls
CUT TO LENGTH LINE
–6–
ACCRA-WIRE PALLET UNCOILER, MDL. F500, Capacity 10,000
Lb, OD 72” Max, S/N F5000514991; 60 Ton BLISS OBI Press,
Mdl. 21 ½; 6 STAND HILSTON ROLLFORMER, Tooled for Angles,
Straightening Head, 5 HP, NORCAL CONTROL; 70 TON HEIM
OBI CUT-OFF PRESS, MDL. 7A-OBI-SG, Stroke 3”, Strokes per
Minute 55, Air Clutch & Brake, S/N 2986; FLANGE BRACE DIE &
SAG ANGLE DIE
ANGLE CUT-OFF / BAR PUNCH LINE
1999 - GEKA HYDRACROP HYDRAULIC IRONWORKER,
MDL. 165/S, Series S – High Speed, Capacity: Punching 185
Ton / 1 ½” x 1 ¼”; Flat Shear 30” x ¾”, Angle 90 deg – 8” x 8” x ¾”;
Bar Crop 2 3/8” Round & Square; Throat 20”, S/N 801; Assorted
Punches & Dies, Feed Conveyor
ROLLFORM LINE
COOPER WEYMOUTH PETERSON COIL CRADLESTRAIGHTENER, Width 18”, 7-Roll Straightener, Entry & Exit
Pinch Rolls, S/N LV187189B06S; Airam Pre-Notch Press; 14 STAND
DAHLSTROM ROLLFORMER, Rollspace 8”, Horizontal Centers
13”, Vertical Centers 5” – 7 ½”; AMS XL 100 Series Length
Control, Mdl. XL106, S/N 3342-1A; Airam Dual Cut-Off Press
1999
2004
ASC GARAGE DOOR PANEL LINE
ANGLE IRON LINE / FLANGE BRACE &
SAG ANGLE LINE
ANGLE IRON / FLANGE BRACE &
SAG ANGLE LINE
GEKA HYDRACROP HYD. IRONWORKER
20,000 LB GIFFORD HILL /
ASC CUT-TO-LENGTH LINE
TO SCHEDULE AN AUCTION OR APPRAISAL, CALL 818.508.7034
CONNECTION PLATE LINE UP TO 1” X 8” PLATE
300 TON PACIFIC PRESSFORMER HYDRAULIC PRESS, MDL. PF300,
Bed 24” x 60”, Stroke 12, Daylight 22”, Two Speed, S/N 5403; ASC
CNC-500 Second Generation Control; Punches; 40ʼ Conveyor &
Loading System
300 TON PACIFIC PRESSFORMER HYD. PRESS
2000
SPARE PARTS FOR PRODUCTION LINES: Ross Air Valves, Arbor Nuts,
Spacers, Pneumatic Bags, Parker Hydraulic Cylinders, Drive Shaft
Universal Couplings, Reliance DC Motors
(To be sold via photo - Located in Iowa)
FLANGE SPLICE & BEVEL LINE
1999
FLANGE BEVEL & SPLICE LINES
CONTROLLED AUTOMATION INFEED CONVEYOR; Lincoln DC600
Weld Power Supply, S/N U1040812429 & Lincoln LN9 Wire Feed; Thermal
Dynamics Merlin 1000 Plasma Cutter, S/N M91152A1925011 w/Lincoln
LN9 Wire Feed; Invincible Flux Vacuum System, Mdl. 4003; Exit Conveyor
INFEED CONVEYOR; Lincoln DC600 Weld Power Supply, S/N AC777354
& Lincoln LN9 Wire Feed; Thermal Dynamics PA 150XL Plasma Cutter,
S/N K92649A192401H w/Lincoln LN9 Wire Feed; Invincible Flux Vacuum
System, Mdl. 4003; Exit Conveyor
CNC LASER CUTTING SYSTEM
AMADA CNC LASER CUTTING SYSTEM
WIEDEMANN CNC TURRET PUNCH
2000 – AMADA MDL. PULSAR 2415-A3-XL, Capacity 2000 Watt, Travels:
X-99”, Y-61”, Z-11.8”; Max Sheet Size 61” x 198”, Material Capacity: Steel
½”, Stainless 3/8”, Aluminum ¼”; Fanuc 160I-L CNC Control, Fanuc
AF2000E Resonator, S/N 25580698
(To be sold via photo - Located in Los Angeles, CA)
CNC TURRET PUNCH
1999 – WIEDEMANN CNC TURRET PUNCH, MDL. C-2000-I,
Capacity 22 Ton, Sheet Size 40” x 50” / with Repositioning 98” x 40”,
Travels: X - 50”, Y – 40”; GE Fanuc OP Control, 2-Auto Index, S/N 2600
(To be sold via photo - Located in Sanford, NC)
PRESS BRAKES
600 TON PACIFIC HYDRAULIC, MDL. 600-22, Overall Bed & Ram 26ʼ,
Between Housings 20ʼ 2”, Stroke 12”, Daylight 24”, Throat 14”, 50 HP
Motor & Pump, Automec CNC 1000 Back Gauge, Three Speed, Black Max
Light Curtains, S/N 3218 (To be sold via photo - Located in Turlock, CA)
500 TON PACIFIC HYDRAULIC, MDL. K500-36, Overall Bed & Ram 36ʼ,
Between Housings 28ʼ 6”, Capacity 24ʼ x 5/16”, Stroke 12”, Daylight 22”,
Autogage CNC99 Control, Three Speed, Tilt Adjustment, (2) 4-Way Die
Holder 18ʼ each, Riser 5 ½” High, (2) Gooseneck Bending Dies 18ʼ each,
STI Optisafe Light Curtains, Front & Rear Roller Conveyor Supports,
S/N 5174 (To be sold via photo - Located in Iowa)
600 TON PACIFIC HYD. PRESS BRAKE
400 TON PACIFIC HYDRAULIC, MDL. K400-30, Overall Bed & Ram 30ʼ,
Between Housings 22ʼ 4”, Stroke 12”, Daylight 20”, Capacity 24ʼ x ¼”,
Two Speed, Tilt Device/Level Control, Die & Die Holder, S/N 5400
200 TON PACIFIC HYDRAULIC, MDL. 200 x 8, Permanently Flanged Bed
& Ram, Bed 18” x 96”, Ram 13” x 96”, Capacity 8ʼ x 5/16”, Stroke 12”,
Daylight 20”, S/N 3162
165 TON PACIFIC HYDRAULIC, MDL. J165 x 12, Overall Bed & Ram 12ʼ,
Between Housings 10ʼ 6”, Capacity 12ʼ x 3/16”, Stroke 10”, Daylight 15”,
S/N 5041
500 TON PACIFIC HYD. PRESS BRAKE
165 TON PACIFIC HYD. PRESS BRAKE
150 TON PACIFIC HYDRAULIC, MDL. K150-17, Overall Bed & Ram 17ʼ,
Between Housings 14ʼ 4”, Capacity 16ʼ x 10 Gauge, Stroke 10”, Daylight
24”, Throat 12 ½”, 3-Speed, Hurco Autobend 7 Control, Hurco Two-Axis
Backgauge – S/N HGBA9087047B; Sti Opti-Safe Light Curtains, S/N 6587
90 TON DREIS & KRUMP MECHANICAL, MDL. 1416-L, Overall Bed &
Ram 20ʼ, Distance Between Housings 14ʼ 6”, Stroke 4”, Shut Height 11”,
Power Adjustment, Air Counterbalance, Autogage CNC 1000 Control &
Two-Axis Back Gauge, S/N 10882877, Light Curtains, 20ʼ Die Holder,
S/N L-16631
2001 – HURCO / MEBUSA CNC HYDRAULIC, MDL. PH65-25, Overall
Bed & Ram 98”, Distance Between Housings 80”, Stroke 3.94”, Daylight
11.8”, Throat 18”, Hurco Autobend 7 CNC Back Gauge, S/N
HDRF0002120A (To be sold via photo - Located in Sanford, NC)
PRESS BRAKE DIES: LARGE AS (2) 18ʼ 4-WAY DIE HOLDERS;
(2) 18ʼ GOOSENECK BENDING DIES (To be sold via photo - Located in Iowa)
400 TON PACIFIC HYD. PRESS BRAKE
90 TON DREIS & KRUMP MECHANICAL
PRESS BRAKE
PRESS BRAKE DIE STORAGE RACKS & DIES, DIE HOLDERS & RISERS
Register at www.BIDITUP.com and receive auction updates via email
–7–
SHEARS • SLEAR LINE • ECONO SLITTER LINE • HYDRAULIC BEAM PUNCH
PLATE FABRICATOR • FABRICATING EQUIPMENT • HYDRAULIC PRESS
SHEARS
CINCINNATI HYDRAULIC SHEAR, MDL. 5FLS20, Capacity
20ʼ x 5/8”, Ball Transfers in Bed, Rake Adjustment, Throat
18”, 40 HP Motor & Hydraulic Pump, S/N 39761
PACIFIC HYDRAULIC SQUARING SHEAR, TYPE
10R.M.4,2; Capacity 14ʼ x 3/16”, Squaring Arm,
S/N (CDE) 49478
WYSONG MECHANICAL SQUARING SHEAR,
MDL. C6-144, Capacity 12ʼ; 7 ½ HP Motor, 24” Back Gauge,
S/N P1-147
SLEAR LINE
Uncoiler – Width 48”, ID 17” – 21”, OD 60” Max, Hydraulic
Drive & Expansion; Pneumatic Cut-Off Shear, Width 54”;
PROGRESSIVE MACHINERY & ENG. SLITTER, MDL.
1513, Width 46”, Arbor Diameter 4”, Driven Slitter, S/N 216
ECONO SLITTER LINE
2004 – IOWA PRECISION ECONO SLITTER LINE, MDL.
ESLR-4816, Capacity 48” Wide x 16 Gauge; 10,000 Lb
Uncoiler, ID 19” – 24”, OD 64”, Width 48”; Feeding & Straightening
Rolls – 3 3/8” Diameter; Hydraulic Shear Head; Slitter Arbor
5” Diameter; Max 5 Slits at 16 Gauge; Runout Table; Remote
Digital Control; Motorized Runout Table; S/N PR-104
(To be sold via photo - Located in Los Angeles, CA)
20’ X 5/8” Capacity
HYDRAULIC BEAM PUNCH
MANCO MFG. FABRILINE, MDL. 3454786, 5-Head
Hydraulic Beam Punch, S/N 197
(To be sold via photo - Located in Turlock, CA)
CINCINNATI HYDRAULIC SHEAR
2004
ELITE BEAM COPER, MDL. ECM-2048-5A, S/N E98022
(To be sold via photo - Located in Ohio)
PLATE FABRICATOR
1998 - PEDDINGHAUS 400/177 TON, MDL. FPS500
PLATE FABRICATOR, Triple Punch Unit, Diameter 1 ¾”
Max, Width 2” – 20”, Thickness 1.25”, S/N 28720
(To be sold via photo - Located in Turlock, CA)
FABRICATING EQUIPMENT
ROTO DIE HYDRAULIC SHEET METAL BENDER,
MDL. 10, Capacity 10ʼ x 16 Gauge, Stroke 3”, Die Space 7 ½”,
S/N 81638
WYSONG MECHANICAL SQUARING SHEAR
2004 IOWA PRECISION ECONO SLITTER LINE
1998
METAL MASTER HYDRAULIC PUNCH
CHICAGO/DREIS & KRUMP BOX & PAN BRAKE,
MDL. BPO-414-6, Width 48”, S/N 323027-M
ROPER WHITNEY PEXTO CRIMPING/BEADING
ROLLER, MDL. 622, Capacity 22 Gauge, Throat 7”,
S/N 5-80
PEXTO SHEET METAL ROLLER, MDL. 99E, Capacity
20 Gauge, S/N 47
GERVER NOTCHER, TYPE GH-1, MACH #15259
DI-ACRO SHEET METAL SHEAR, MDL. 4, WIDTH 24”,
S/N EB-2094
NIAGARA 30” HAND BRAKE, MDL. 3A, S/N 62819
NATIONAL RIVET MFG. RIVETER, MDL. 616, S/N 357H1
ELITE BEAM COPER
PEDDINGHAUS 400/177 TON PLATE FABRICATOR
LOCKFORMER/CLEATFORMER, Capacity 22 Gauge,
S/N 13623
MARVEL SERIES 8 VERTICAL BAND SAW, MDL. 8-MK1,
S/N 82119; In-Feed Conveyor
ROPER WHITNEY SLITTER, MDL. 799E, S/N 47
HYDRAULIC PRESS
1999 – 100 TON SUTHERLAND / DEES HYDRAULIC
4-POST PRESS, MDL. HP-100, Product #24053, Stroke 20”,
Daylight 28”, Bed & Platen 63” x 63”, Between Posts 50” x
50”, Shadow IV Light Curtains; Speeds: Closing 5300 IPM,
Pressing 42 IPM, Return 600 IPM; Allen Bradley Slc 503
Controller, S/N 19906302013
–8–
FABRICATION EQUIPMENT
BRIDGEPORT VERTICAL MILL
TO SCHEDULE AN AUCTION OR APPRAISAL, CALL 818.508.7034
STRAIGHT SIDE & GAP FRAME PRESSES • UNCOILERS & COIL CRADLE-STRAIGHTENERS
CUT-OFF PRESS • TOOL ROOM • COLD SAW
40-TON
40 TON ROUSSELLE SSDC PRESS
100-TON
30,000 LB. AMERICAN STEEL LINE UNCOILER
TRENNJAEGER COLD SAW
TOMINACA RADIAL ARM DRILL
1999
(17) AVAILABLE
SUTHERLAND / DEES HYD. 4-POST PRESS
LINCOLN RANGER 8 WELDERS
LEBLOND REGAL ENGINE LATHE
150 TON BLISS OBI PRESS, MDL. 29, Bed 30” x 47”, Flanged Ram 24” x 34”
110 TON VERSON GAP PRESS, MDL. 110BG, S/N 19255
105 TON VERSON GAP PRESS, MDL. 7.5F, Stroke 4”, Strokes per Minute 50,
Bed 30” x 39”, Shut Height 18”, Adjustment 6”, Air Clutch & Brake, S/N 17322
95 TON BLISS OBI PRESS, MDL. 28, Bed 28” x 37”, Single Back Geared, Rolling Key
Clutch, S/N H48505
(2) 80 TON NIAGARA GAP FRAME PRESSES, MDL. UA80, Adjustable Bed 20” x 24”,
Slide 16” x 24”, Mechanical Clutch
(To be sold via photo - Located in Iowa)
56 TON JOHNSON OPEN BACK INCLINABLE PRESS, MDL. 5, Bed 19” x 30”,
Mechanical Clutch (To be sold via photo - Located in Iowa)
40 TON ROUSSELLE STRAIGHT SIDE DOUBLE CRANK PRESS, MDL. 4S56,
Stroke 2”, Strokes per Minute 45, Bed 20” x 56”, Shut Height 11 ¾”, Slide Adjustment 3”,
Air Clutch & Brake, Die, S/N 21609
(To be sold via photo - Located in Iowa)
35 TON BLISS OBI PRESS, MDL. 21S, Bed 17” x 26”, Single Back Geared, Rolling Key Clutch
STRAIGHT SIDE & GAP FRAME PRESSES
(2) 30,000 LB. AMERICAN STEEL LINE UNCOILERS, Width 54”, ID 19” – 24”, OD 60”,
Motorized, Hold Down Arm, Coil Upender & Lift, S/N 2917
(To be sold via photo - Located in Michigan)
10,000 LB. AMERICAN STEEL LINE UNCOILER, Width 40”, ID 19” – 24”, OD 60”
10,000 LB. UNCOILER, Width 36”, Hyd. Drive & Expansion, Air Brake
10,000 LB. B&K UNCOILER, Mdl. 10K, Width 36”
REGAL COIL CRADLE-STRAIGHTENER, Width 12”, Entry & Exit Pinch Rolls,
7-Roll Straightener
3,000 LB. REGAL UNCOILER, Width 15”
2,500 LB. COOPER WEYMOUTH UNCOILER, Width 24”, ID 15” – 20”, OD 48”, S/N P2801
UNCOILERS & COIL CRADLE-STRAIGHTENERS
28 TON AIRAM PRESS, MDL. ATP134, Stroke 3”,
Bed 20” x 24”, S/N 5687798/134
AIRAM PRESS, MDL. ATP479
CUT-OFF PRESS
LEBLOND REGAL ENGINE LATHE, Swing 26”,
Centers 100”, Tailstock, Steady Rest, Cross Slide,
Hole Through Spindle 2 5/8”, 4-Jaw Chuck, 3-Jaw
Chuck, S/N 958
BRIDGEPORT VERTICAL MILL, Table 9” x 42”,
1.5 HP, Quill Travel 5”, Power Feed, S/N BR153662
ENCO VERTICAL MILL, MDL. 2S92050,
Table 9” x 49”, 2 HP, Quill Travel 5”, S/N 810815
TOMINACA RADIAL ARM DRILL, MDL. TRE
1000, Travel 4ʼ, Column Diameter 12”, Box Table
MARVEL VERTICAL BAND SAW, SERIES 8,
MDL. 8/M8/M3, Cutting Cap. 18” x 20”, S/N 810640
POWERMATIC VERTICAL BAND SAW
COLBURN DRILL PRESS
EDLUND DRILL PRESS, Mdl. 2F12, Table 20” x 24”,
S/N 66376
INTERNATIONAL TOOL HYDRAULIC SHOP
PRESS, MDL. SH-4000, Between Columns 28”,
Hydraulic Unit, S/N 2350
TOOL ROOM
TRENNJAEGER MDL. LKH310/1000 COLD SAW,
CAPACITY 40”, S/N 835
(To be sold via photo - Located in Turlock, CA)
COLD SAW
Register at www.BIDITUP.com and receive auction updates via email
–9–
ROLLING STOCK • WELDERS • CRANES • AIR COMPRESSORS
ROLLING STOCK
PETTIBONE / MULTIKRANE MOBILE CRANE,
MDL. 17K30, Capacity 30,000 Lb, S/N 57-3-A1-5456
HYSTER 15,000 LB. CAPACITY FORKLIFT, MDL. H155XL,
Diesel, Lift 220.5”, Side Shift, 3-Stage Mast, Solid Tires,
Fork Length 48”, Back Tilt 6 Deg, S/N F006D01865R
(2) HYSTER 13,500 LB. CAPACITY FORKLIFT,
MDL. H135XL, Diesel, Lift 212.5”, Side Shift, Solid Tires,
Fork Length 6ʼ, Back Tilt 10 Deg, S/N F006D02257R &
F006D02258R
HYSTER 13,500 LB. CAPACITY FORKLIFT, MDL. H135XL,
Diesel, Lift 173.5”, Side Shift, 2-Stage Mast, Solid Tires,
Fork Length 6ʼ, Back Tilt 10 Deg, S/N F006D03054T
HYSTER 5,000 LB. CAPACITY FORKLIFT, MDL. H50XM,
Diesel, Lift 218”, Side Shift, 3-Stage Mast, Solid Tires,
Fork Length 60”
CLARK 4,000 LB. CAPACITY FORKLIFT, LPG, Lift 154”,
S/N C40B-106-782-466
SKYJACK MDL. SJKB-33N BOOM LIFT, Drive Height 33ʼ,
Work Height 39ʼ, Platform Capacity 500 Lb, Platform 30” x 48”,
Electric, S/N 90838
PETTIBONE / MULTIKRANE MOBILE CRANE
(2) SCHRECK INDUSTRIES 20,000 LB. COIL LIFTER,
MDL. CH-E, S/N 11271-1 & 11271-2
FORD SINGLE AXLE SEMI TRUCK, MDL. AEROMAX
L-8000, VIN FTY585EPVA01447
(To be sold via photo - Located in Turlock, CA)
FORD F250XL PICK UP TRUCK, Automatic, A/C,
VIN 2FTHF25MXPCA64283
FORD AEROMAX L-8000 TRUCK
FORD 3000 TRACTOR, Mdl. 24, S/N C259736
w/Howe Mdl. 6B6 Implement
RAZOR BACK CUTTING ATTACHMENT, Mdl. RZ60,
Width 60”, S/N 12-29933
AMERICAN LINCOLN Mdl. 91WS Walk Behind Sweeper,
Sweep Path 36”
HOBART ACCU-CHARGER
VIEW OF HYSTER FORKLIFTS
WELDERS
(17) LINCOLN RANGER 8 GASOLINE POWERED WELDERS;
LINCOLN DC 400 WELDERS; LINCOLN PW 455 WELDERS;
LINCOLN DC 600 WELDERS; LINCOLN WIRE FEEDS
MILLER MICRO BUTT WELDER, Mdl. 7MD-4, S/N 32468
(To be sold via photo - Located in Kernersville, NC)
CRANES
2 TON JIB CRANE & YALE HOIST
10,000 LB SHEET LIFTER
SKYJACK BOOM LIFT
FORD TRACTOR & TRUCK
SPREADER BARS & VACUUM LIFTS
QUINCY AIR COMPRESSOR
FORD AEROMAX L-8000 TRUCK
PARTIAL VIEW RIGGING CHAINS
VIEW OF DEWALT DISC GRINDERS
THOMPSON TRASH PUMP
LISTA CABINETS & SHELVES
ANVER VACUUM LIFT/SHEET LIFT, Capacity 2,000 Lb.
CHAINS; 2 TON JIB CRANES & HOISTS
ACCO MDL. 5600 VAC LIFT, S/N 1235758 w/415 Lb.
Capacity Magnetic Lifters
SPREADER BARS – Capacity 20,000 Lb. x Width 35ʼ
CENTRAL HYDRAULICS 2 TON FOLDABLE CRANE
AIR COMPRESSORS
GARDNER DENVER 100 HP ELECTRA SAVER II
AIR COMPRESSOR
QUINCY 50 HP ROTARY SCREW AIR COMPRESSOR,
MDL. QSI500ANA31B, S/N 99645
ATLAS COPCO AIR COMPRESSOR, MDL. GA 355-175
BINKS 25 HP AIR COMPRESSOR, MDL. 331090, S/N 3147
QUINCY 7.5 HP AIR COMPRESSOR, MDL.
QT7HATP00007, S/N 5139031
SULLAIR AIR DRYER, MDL. SRD-630 AC, S/N 003-05002
RECEIVER TANK – 500 GALLON, S/N 97891
– 10 –
TO SCHEDULE AN AUCTION OR APPRAISAL, CALL 818.508.7034
MISCELLANEOUS EQUIPMENT
MISCELLANEOUS
THOMPSON MDL. 6HT WET PRIME 6” PORTABLE TRASH PUMP,
Trailer Mounted, S/N 6HT-1256
(14) SELF-DUMPING HOPPERS: 1 Yd, 2 Yd & 3 Yd
SIGNODE TENSION WELD POWER STRAPPING MACHINE, MDL. MCD700
(To be sold via photo - Located in Iowa)
BAR MATERIAL RACKS & CANTILEVER RACKS
(13) STEEL ROLLER TABLES – 20’ X 40’
THERMCO GAS MIXER, MDL. 8500, 0-750 scfh, Mix 0 – 50% Carbon
Dioxide in Argon
1998 - ACCU-TROL MANIFOLD CONTROL, MDL. LC-4-2, S/N 15672
ROD STRAIGHTEN & CUT-OFF LINE, Capacity 7/16” Diameter,
30ʼ Run-Out Table
HOTSY STEAM CLEANER
DIP PAINT LINE W/MONORAIL CONVEYOR & DRY CHAMBER
UPRIGHT SCISSOR PLATFORM LIFT, Capacity 26ʼ;
PALLET JACKS; STEEL DESKS; SIGNODE STRAPPER; STEEL HORSES;
GREENLEE CONDUIT BENDER, No. 555 Electric
PHOENIX DRY ROD STABILIZING OVEN, Mdl. 5, Type 950FX,
Range 100 deg – 450 deg F
LANDA WASH WATER SYSTEM – Landa CLP 7033 Clarifier; Landa Ozone
Generator; Ph Pump; Accumulator Tank; 4-Filter System; Multi Media
Filter/Carbasorb Filter
(51) STEEL ROLLING CARTS
DIRECTIONS
CLAMPS; WRENCHES; STRAPS, PIPE WRENCHES; SLEDGE
HAMMERS; DAREX GRINDER; PNEUMATIC STAPLERS; PNEUMATIC
GRINDERS; (2) MAG DRILLS; (2) MILWAUKEE 1 ¼” SUPER HOLE
SHOOTERS; (20) DEWALT ELECTRIC DISC GRINDERS; DAYTON
WET/DRY SHOP VAC, MDL. 4YE63; (5) YAMAHA & EZ-GO MDL. 60 GOLF
CARTS; CRAFTSMAN 19 HP RIDING MOWER, WIDTH 42”, 6-SPEED;
BEARINGS – TIMKEN & FAFNIR; PRINTERS; CHAIRS; OFFICE
FURNITURE; EMPLOYEE LOCKERS; SST ANSI ROLLER CHAIN;
MARTIN GEARS; DAYTON SPEED REDUCERS; TEEL PUMP
(To be sold via photo - All Located in Lockeford, CA)
LODGING
FROM SACRAMENTO INTERNATIONAL AIRPORT (SMF):
Exit Airport for I-5 South. Continue on I-5 South for 10 miles to exit for US-50 / CA-99
South. Travel on CA-99 South for 32 miles to exit for CA-12E (Central Lodi/San Andres).
Turn right onto CA-12 E / E Victor Rd and travel 4 miles to N Tretheway Rd. Turn left onto
N Tretheway Rd and travel ½ mile to Locke Rd. Turn right onto Locke Rd and immediately
make slight right onto E Brandt Rd. Travel ½ mile to plant on left. Watch for auction signs.
INN AT LOCKE HOUSE
19960 N Elliott Rd.
Lockeford, CA
209-727-5715
BEST WESTERN
710 S Cherokee Ln.
Lodi, CA
800-780-7234
QUALITY INN
118 N. Cherokee Ln.
Lodi, CA
209-367-4848
UPCOMING AUCTIONS
BIDITUP SERVICES
Onsite & Webcast
Whether selling assets or looking for the right equipment to buy, we can help you
appraise, auction, find or finance machinery and other assets. Count on our
experienced and certified staff for competitively superior services from start to finish.
Assets No Longer Required in
the Continuing Operations of:
NEENAH PAPER, LLC
August 26 at 10:00am PDT
COMPLETE PAPER MILL AND
CONVERTING FACILITY
Located in Ripon (Modesto), CA
Onsite & Webcast
By Order of the Superior Court of
Ontario, Canada Assets of:
WINDSOR MATCH PLATE
TOOL & DIE LTD.
September 22, 10:00am EDT
LARGE STAMPING AND TOOL &
DIE FACILITY AND REAL ESTATE
Windsor, Ontario, Canada
BIDITUPʼs prime focus is the conversion of assets via the "Public Auction" forum. We conduct
approximately 75 national auction sales per year. These events exude enthusiasm, excitement and spirited
participation. BIDITUP's innovative conversion programs include our direct purchasing of complete
businesses, personal property, product line and/or certain assets including Real Estate. Guaranteed
participation and various commission structures are also offered and tailored to fulfill individual criteria.
Upon your request a BIDITUP representative will personally visit your facility, free of charge, for a
confidential consultation to further elaborate on these programs.
AUCTIONS
The modern day auction environment has dramatically altered the liquidation philosophy of past years.
Liquidation is still a viable option for conversion when perhaps an item is proprietary with an extremely
limited marketplace and/or time for vacating the premises. A liquidation is suitable for one item or an entire
facility and can be combined with an auction. Upon our inspection and understanding of your goals, our
team can provide you with a comprehensive analysis of which method is best suited for your asset
conversion program.
LIQUIDATIONS
The objective of an appraisal is to define accurate value. A pre-appraisal of assets is essential to an auction
or liquidation's success and/ or lender's security interest. BIDITUP's certified appraisers follow exacting
standards to a science, combined with hands-on knowledge of the immediate marketplace, providing you
with values you can rely upon. From east to west, our appraisers cover all the numbers.
APPRAISALS
Thinking of selling
your equipment?
WE WILL
PURCHASE
YOUR ASSETS
FOR CASH!
We offer financing and leasing through Charcole Capital. Charcole Capital is a wholly owned
division of BIDITUP Auctions & Appraisals Worldwide. As a global leader in asset recovery,
Charcole Capital understands the value of industrial and hi-tech assets. We finance all types
of new and used machinery. We offer fast turnaround - 24 hour response with minimal
paperwork at competitive rates. All Credit Considered.
FINANCING & LEASING
Register at www.BIDITUP.com and receive auction updates via email
– 11 –
LIVE
ON-SITE &
WEBCAST
MACHINERY AUCTION
WEDNESDAY, SEPTEMBER 16, 2009
Machinery and Equipment No Longer Required in the Ongoing Operations of:
CECO BUILDING SYSTEMS, STAR BUILDING SYSTEMS, DBCI AND MBCI
MAJOR METAL BUILDING MANUFACTURER
AUCTION
PREVIEW
LOCATION
Wednesday, September 16, 2009
Beginning at 10:00am PDT
Tuesday, September 15,
9:00am to 4:00pm PDT
12101 E. Brandt Rd.,
Lockeford, CA 95237
FOR THE COMPLETE TERMS & CONDITIONS OF THE AUCTION
Please visit our website www.BIDITUP.com and click on CECO BUILDING SYSTEMS
Thinking of having an auction or need an appraisal? Call us at 818.508.7034
FEATURED AUCTION
WED., SEPT. 16, 2009
BEGINNING AT 10:00AM PDT
Lockeford, CA
Machinery and Equipment No Longer Required
in the Ongoing Operations of:
CECO BUILDING SYSTEMS
STAR BUILDING SYSTEMS
DBCI AND MBCI
MAJOR METAL
BUILDING
MANUFACTURER
For a Complete Listing of
Upcoming Auctions
Visit www.BIDITUP.com
Register Online and Receive Auction
Updates and Information via E-mail.
WEBCAST
Can’t attend the auction in
person? You can participate and
bid in real time via the Internet.
Preview assets with detailed
digital photos, lot catalogs,
and in-depth descriptions.
For more information, visit
www.BIDITUP.com
STANDING SEAM LINE MANUFACTURES STS PANEL PROFILE /
STARSHIELD ROOF PANEL
CINCINNATI HYDRAULIC SHEAR
MACHINERY AUCTION, LOOK INSIDE!
11426 Ventura Boulevard
Studio City, California 91604
Phone: 818.508.7034
Fax: 818.508.3025
[email protected]
Steven Mattes, Auctioneer
CA Bond #CSC3062775
ATTENTION: PLANT MANAGER
OR EQUIPMENT BUYER