PLANT CLOSED! PLANT CLOSED!

PLANT CLOSED!
EVERYTHING MUST BE SOLD!
CAN’T ATTEND?
JUST CLICK
& BID!
ROLLFORMERS • UNCOILERS • CNC LATHE
MACHINE SHOP • PRESSES • TUBE MILLS • FORKLIFTS
IN
W
NE 001
2
14-STAND YODER W35 ROLLFORMER
MAZAK SLANT TURN 450, 1500 HEAVY-DUTY CNC LATHE
IN
W 0
E
N 99
1
16-STAND ARDCOR ROLLFORMER, F-10, 2"–10", S/N 90-037
LITTELL MDL. 60-24 6,000-LB. DOUBLE UNCOILER, S/N 87320-82
OHIO ROLLFORM EQUIPMENT, INC.
6607 CHITTENDEN ROAD, HUDSON, OHIO 44236
(JUST NORTH OF AKRON)
TUESDAY, FEBRUARY 22 AT 10:00 A.M.
(800) 722-3334
http://www.michaelfox.com
email: [email protected]
NORTH AMERICAN OFFICES: CALIFORNIA,
CANADA, FLORIDA, ILLINOIS, MARYLAND,
NEBRASKA, NEW YORK, OREGON,
PENNSYLVANIA, TEXAS, WASHINGTON,
ADDITIONAL OFFICES WORLDWIDE
MICHAEL FOX INTERNATIONAL, INC. OH LIC. #63-83-1062
DAVID S. FOX OH LIC. #63-83-3397
ROLLFORMERS
3-Stand YODER M1/2 Rollformer, 1-1/2"
Spindle, 10" Roll Space
12-Stand TISHKEN Rollformer, Mdl. MW2,
2" Spindle, 8" Roll Space
4-Stand TISHKEN Rollformer, Mdl. MW2,
S/N 16292-1176, 2" Spindle Diameter
12-Stand TISHKEN Rollformer, Mdl. MW2-12,
S/N 11244-6-64
4-Stand TISHKEN 8HMW Rollformer
12-Stand MAPLEWOOD Rollformer,
3" Spindle Diameter, 10" Roll Space,
5"–7-1/2" Vertical Adjustment,
15" Horizontal Centers, 40 Hp. Motor
5-Stand YODER M3 Rollformer, 3" Spindle,
18" Roll Space
5-Stand YODER M3 5-on-11 Rollformer,
w/2-Motor Drive, Misc. Shafts
6-Stand DAHLSTROM Rollformer, 3" Spindle
Diameter
10-STAND TISHKEN MDL. HMWI-1/2 ROLLFORMER, S/N 17994-2-82
6-Stand ARDCOR Rollformer, Mdl. SF15,
2" Spindle Diameter, 30" Roll Space
7-Stand METFORM Rollformer, 1-1/2"
Spindle, 10" Roll Space, 4"–7" Vertical
Adjustment
8-Stand DETROIT Rollformer, 1-1/2" Spindle
Diameter, 8" Roll Space
13-Stand ARDCOR Rollformer, Mdl. 2FU,
S/N U200, 75 Hp. Motor, Equal Ratio, 4"
Spindle Diameter, 32" Roll Space, Vertical
Adjustment 8"–12", 18" Horizontal Center
14-Stand YODER W35 Rollformer, 26" Roll
Space, 4-1/2" Spindle Diameter, 7-1/2"–16"
Vertical Adjustment, 24" Horizontal Centers,
NOTE: This is a rafted rollformer w/(4)
additional rafts w/(10) additional stands
8-Stand YODER Rollformer, Mdl. M1/2,
2" Spindle, 8" Roll Space
16-Stand ARDCOR Rollformer, F-10-2"-10",
S/N 90-037, 50 Hp., DC, 1:33 Ratio, 4"–7-1/4"
Vertical Adjustment, 15" Horizontal Centers,
10" Roll Space, 2" Spindle, Refurbished and
Re-Tooled, New 1990
10-Stand TISHKEN Rollformer,
Mdl. 10MW2, S/N 1630-104-5, 2" Spindle
Diameter, 8" Roll Space
16-Stand TISHKEN Rollformer, Mdl. MW2,
S/N 8701-469, 2" Spindle, 15" Roll Space,
H.S. 7:1 Worm Ratio
10-Stand TISHKEN Rollformer,
Mdl. HMW1-1/2, S/N 17994-2-82
16-Stand TISHKEN Rollformer, Mdl. 16MW-2,
S/N 11594A-12-65, 2" Roll Space
8-Stand TISHKEN Rollformer, 1-1/2"
Spindle, 6" Roll Space
16-STAND TISHKEN MDL. MW2 ROLLFORMER, S/N 8701-469
12-Stand YODER Rollformer, Mdl. M3
11-Stand YODER M1-1/2 Rollformer,
w/Drive
11-Stand MAPLEWOOD Duplex Rollformer,
16"–56" Coil Width Adjustment, 5"–6-1/2"
Vertical Adjustment
12-Stand ARDCOR Rollformer, 2" Spindle,
24" Roll Space
12-Stand DAHLSTROM Rollformer,
2" Spindle, 10" Roll Space
12-Stand DAHLSTROM Duplex Rollformer,
24"–54" Strip, 3-1/2"–4-1/2" Vertical
Adjustment, 6-1/2" Horizontal Centers
12-Stand TISHKEN Rollformer, Mdl. MW2,
2" Spindle
16-Stand TISHKEN Rollformer, Mdl. MW2,
8" Roll Space, 40 Hp.
HUGE QUANTITY OF ASSORTED
ROLLFORM TOOLING, YODER M2
GEAR BOXES AND PARTS, ARDCOR
GEAR BOXES, SHAFTS, SPINDLES, B&K
ROLLFORM GEAR BOXES, ROLLFORM
BASES, TOOLING AND SPACERS,
ROLLFORMER DRIVE SYSTEM, LARGE
QUANTITY OF TISHKEN
MISCELLANEOUS PARTS, LARGE
QUANTITY OF (4) SECTIONS OF
COMPONENTS, DIE SETS, SIDE
ROLLS AND ENTRY GUIDES
12-STAND MAPLEWOOD ROLLFORMER
13-STAND ARDCOR MDL. 2FU ROLLFORMER, S/N U200
11-STAND YODER M1-1/2 ROLLFORMER
A 10% BUYER’S PREMIUM APPLIES TO ALL ON-SITE PURCHASES
ROLLFORM TOOLING
SOME ITEMS
MAY BE
SUBJECT TO
PRIOR SALE
UNCOILERS
SAMCO 12-Ton Air Press
TISHKEN 12-Ton Cutoff Press, Mdl. C04-HA
AUTOMATIC FEED MDL. 102472
10,000-LB. UNCOILER, S/N 3134
AIR RAM 14-Ton Cutoff Press, Mdl. ATP 134-2
PNEU POWER 15-Ton Cutoff Press
UNCOILERS
(2) TISHKEN 15-Ton Cutoff Presses, Mdl. AC0-15
LITTELL 500-Lb. Single Uncoiler
(3) TISHKEN 18-Ton Tiltbed Cutoff Presses, Mdl. C0T6A
LITTELL 600-Lb. Double Uncoiler
TISHKEN 18-Ton Cutoff Press, Mdl. C/0-6-8-18
LITTELL 600-Lb. No. 3 Uncoiler
Pneumatic 20-Ton Air Press
LITTELL 600-Lb. No. 5 Uncoiler
SAMCO 20-Ton 4-Post Air Press
(7) AMERICAN STEEL LINE 1,000-Lb.
Single Uncoilers
Electric/Hydraulic 25-Ton H-Frame Press
EGAN 1,000 Lb. Single Uncoiler, Mdl. 1030
SHEPHERD 25-Ton Mechanical Press, 2" Stroke, 27" x 14"
Between Pins, S/N 3052913
(2) OMEGA 25-Ton Est. 6-Post Electric Presses, Over Running
(12) LITTELL 1,000-Lb. Uncoilers,
Mdls. 10702, 10, 60
TISHKEN 25-Ton 4-Post Cutoff Press, New 1979
TISHKEN 25-Ton 4-Post Cutoff Press, Mdl. C/08-8L-24
AMERICAN STEEL LINE 1,500-Lb.
Single Uncoiler
( 2 ) T I S H K E N 2 5 - T o n 4 - P o s t P r e s s e s , Mdl. C010-10-25,
S/N 21863-997, 21877-997, New 1997
COOPER WEYMOUTH 1,600-Lb.
Uncoiler, Mdl. 2R
LITTELL 2,000-Lb. Single Uncoiler,
Mdl. 20-24, S/N 87300-82
(3) AMERICAN STEEL LINE 2,500-Lb.
Single Uncoilers
YODER 25-Ton Cutoff Press, Mdl. P-25
PNEU POWER 15-TON CUTOFF PRESS
MISCELLANEOUS TUBE
& FEED EQUIPMENT
YODER 30-Ton Cutoff Press, Mdl. P-30
PNEU POWER 40-Ton Air Press
ROBONEX Hydraulic 4-Post Cutoff Press
ROUSSELLE 40-Ton OBI Press, S/N 17549, 3–3-1/2–12, 105 SPM
LITTELL 2,500-Lb. Double Uncoiler
TISHKEN 9-Roll Flattener, 18" Wide
(4) LITTELL 2,500-Lb. Double Uncoilers,
w/Electric Brake
TISHKEN Flattener, Mdl. 6R6
ROUSSELLE 40-Ton Gap Frame Press, Mdl. 4B60, S/N P-31-483,
5"/3"/13", 110 SPM
DAHLSTROM 24-Roll Flattener, Mdl. 24269, Capacity
26–28 Ga., 24" Wide
(2) YODER 40-Ton 4-Post Cutoff Presses, Mdl. P-40,
S/N Y1284-62, N/A
PRODUCTION MACHINERY 18" Flattener, Hydraulic,
18" x .160 Capacity
AIR RAM 50-Ton Cutoff Press, Mdl. ATP950
COOPER WEYMOUTH PETERSON
3000- Lb., No. 3R18
AMERICAN STEEL LINE 4,000-Lb.
Single Uncoiler
ROWE Coil Straightener, Mdl. A-15-080
DAHLSTROM 50-Ton 4-Post Cutoff Press
(2) TISHKEN 50-Ton 4-Post Cutoff Presses, Mdl. C08-50
JACO Double Uncoiler 4,000-Lb.,
Mdl. JDRE-4016-02A
BURRMASTER Tube De-Burr Machine
CADALIC Roll Marker, Mdl. 58
LITTELL 4,000-Lb. Single Uncoiler,
36" Wide, Mdl. 90-36, S/N 42395-50
YODER 50-Ton Cutoff Press, Mdl. P50, S/N Y533-8-68, 6" Stroke
LOOPCO Tube De-Dimple Machine
FEDERAL 60-Ton OBI Press, Mdl. 55, S/N 55-268, 6" Stroke, 20"
Shut Height
(2) LITTELL 4,000-Lb. Single Uncoilers
COOPER WEYMOUTH 5,000-Lb. Double
Uncoiler, S/N 5000-18P-553
Spiral Duct Machine
KENT Floop Coil Accumulator, Mdl. 1075-3048, L/R
Operation, 8" Strip
TUREK & HELLER Flying Saw, Abrasive Cut
LITTELL 6,000-Lb. Double Uncoiler,
Pneumatic Brake, Mdl. 60-24, S/N 87320-82,
New 1982
LITTELL Press Feeder
AUTOMATIC FEED 10,000-Lb. Uncoiler,
Mdl. 102472, S/N 3134
(3) AIR RAM 3-Ton Cutoff Presses, Mdl. ATP125
PRESSES
PERFECTO 10,000-Lb. Double Driven
Uncoiler, Mdl. RD-1024B, S/N RD 77053
(4) AIR RAM 3-Ton 4-Post Cutoff Presses, Mdl. ATP500
ARDCOR 15,000-Lb. Single-Driven Uncoiler
(2) AIR RAM 7-Ton Air Presses, Mdl. ATP124
JACO Double Uncoiler, Mdl. JDRE-2016-DC,
S/N 3794103
DAHLSTROM 8-Ton 4-Post Cutoff Press, Mdl. 2D,
S/N P472
PERFECTO Uncoiler, Mdl. L030-40, S/N 3362
TISHKEN 50-Ton 6-Post Cutoff Press, Mdl. CO10-80-50
PNEU POWER 5-Ton 2-Post Air Press
ARDCOR 10-Ton 4-Post Cutoff Press
(5) 10-Ton Est. 4-Post Cutoff Presses
LARGE QUANTITY OF COIL STOCK
Manual/Hydraulic 12-Ton H-Frame Press
PNEU POWER 12-Ton 4-Post Air Press
AIR RAM MDL. ATP454 70-TON CUTOFF PRESS
PRESSES, cont.
HENERY & WRIGHT 60-Ton 4-Post Cutoff Press
TISHKEN 60-Ton 4-Post Cutoff Press, Mdl.
CO-24-24-60, S/N 21942-299, New 1999
AIR RAM 70-Ton Cutoff Press, Mdl. ATP454
ARDCOR 75-Ton 4-Post Cutoff Press, Mdl.
75-4-36, S/N 3500-24, 4" Stroke, 36 Between
Housing, 9-1/2"–11-1/2" Shut Height
TISHKEN 80-Ton 4-Post Cutoff Press, Mdl.
CO-12-24-80, S/N 21859-997, New 1997
MEEHANITE 3.0 Hp. Vertical Mill, 10" x 54"
Slotted Table, w/Anilam Wizard,
450 Digital Controller
ENCO 2.0 Hp. Vertical Mill, 10" x 54"
Slotted Table, w/Super Platinum Edge
Digital Controller
BRIDGEPORT 2.0 Hp. Vertical Mill, w/9" x 42"
Slotted Table, w/Mitutoyo Digital Controller,
S/N 60972
TISHKEN 150-Ton 4-Post Cutoff Press, Mdl.
CO12-4XHA, S/N 14210-870, 2-1/2" Stroke
CARLTON 4' Radial Arm Drill
(2) TISHKEN 2-Post Cutoff Presses, Mdl. 4HW
(2) Hydraulic 4-Post Cutoff Presses
HAVEN Tube Cutoff Press, Mdl. 802, S/N 2308
PNEU POWER Press Controls
CNC LATHE
MAZAK Slant Turn 450 1500 Heavy-Duty
CNC Lathe, 21" 3-Jaw Chuck, 28" Swing,
7-1/2" Spindle Bore, 45 Hp., 80" Between
Centers, 640T Fusion Control, New 2001
MACHINE SHOP
BROWN & SHARPE Surface Grinder, Micro
Master Mdl. 12 x 36, S/N 523-1236-122,
Hydraulic Feed
ROCKWELL 10" Table Saw, w/Sundstrand
Balancer
TOLEDO-BEAVER 100 10" Cutoff Saw,
S/N 100222000402
DELTA 17-600 Pedestal Drill
Press, S/N 1386236, 1/2" Chuck
OUTSIDE MICROMETER SET
CLAUSING 15 x 48 Engine Lathe, 14" Swing,
40" Center-to-Center
AIR RAM 140-Ton 8-Post Cutoff Press, Mdl.
R4600, 28" x 55"
YODER 150-Ton High-Speed Cutoff Press,
Mdl. P150, 2" Stroke, 23-1/2 x 24-1/2 Between
Posts, 25 Hp., Tilt Base, New 1988
MEEHANITE 3 HP. VERTICAL MILL
KALAMAZOO H9AW Horizontal Band Saw,
S/N 12.576
SEARS Pedestal Drill Press,
1/2" Chuck
16" DoALL Vertical Band Saw, S/N 146-68213
TRADESMAN 7075 8" Double Pedestal Grinder
DAYTON 8" Single Pedestal Grinder
RIDGID 535 Electric Pipe Threader,
S/N 377408
Custom Portable 3.0 Hp. Dust
Collector System
TITAN Table Type Horizontal Boring Mill,
43" x 51" Table, 1,180 RPM, 700mm Boring
Shaft Axle Stroke, 180mm Slice Stroke, 900mm
Facing (Plane) Max. Diameter, w/Heidenhain
Pose-E-Touch II Digital Controller
DUMORE Tool Post Grinder
(2) IRONBAY MPS52 Pneumatic Iron Cutters,
w/Foot Pedal, Max. Capacity 20/.090
KALAMAZOO 8 CD Metal Cutting Band Saw,
S/N 6521573
WARNER & SWASEY M-3500 Turret Lathe,
6-Position Turret, w/21" 3-Jaw Chuck , 21"
Swing, 3' Center-to-Center, S/N 1472509
MITTS & MERRILL Key Seater
Complete Machine Shop Refurbishment Facility
Including Drills; Grinders; Saws; Wrenches;
Jacks; C -Clamps; Broach Sets; Vernier Calipers;
Height Gages; Micrometers; Granite Surface
Plates; Machine Vises
UNABLE TO ATTEND?
BID LIVE ONLINE WITH GoWebcast
FOR DETAILS VISIT OUR WEBSITE:
www.michaelfox.com
THOMPSON SURFACE GRINDER, 18" x 6" MAGNETIC CHUCK
Michael Fox International, Inc. Appraisal Services
Michael Fox International’s professional appraisal department values machinery, equipment and inventory throughout the world. From small
quantities to multiple plants, our large accredited staff is available to service your appraisal needs. USPAP compliant and accepted by major
financial institutions. East Coast Headquarters: (800) 722-3334. West Coast Headquarters: (866) 390-6369. Call today for a no obligation quote.
NE
W
20 IN
03
TUBE MILLS
(2) T & H 1/2" TIG Tube Mills, Mdl. WU8, w/Tig
Welder and Tester, w/Gas Mixer
YODER M2 Tube Mill, (4) Breakdowns, 3-Fin
Mill, 3-Size
YODER M2 Tooling for Tube Mill
ELECTRICAL
SOUTHERN 250 KVA Dry Type Transformer
(2) ACME 118 KVA Drive Isolation Transformers
GS 45 KVA General Purpose Transformer
SYLVANIA 37.5 KVA Power Transformer
SYLVANIA 30 KVA Power Transformer
CHALLENGER 75 KVA Drive Isolation
Transformer
G.E. 35 KVA Transformer
MG Set, 125 Hp.
Large Quantity U.S. ELECTRIC,
WESTINGHOUSE, DYNAMATIC, EMERSON,
and RELIANCE 7.5–60 Hp. Motors, Some
Variable Speeds
LINCOLN MDL. 355 SQUARE WAVE 350-AMP,
AC/DC, TIG & STICK ARC WELDER
MISCELLANEOUS
HOTSY 292 V.5 High-Pressure Spray Wash
Cabinet, S/N M1541
MONON XP/65 45" Tandem-Axle Box Trailer,
60,000 GVW, 1979
Heavy Duty Pallet Type Racks
Clip-On Pallet Racking; Jib Cranes; Storage
Cabinets; SAFETY KLEEN Parts Washers; Spray
Paint Booth; Steel Work Tables; VIDMAR Cabinets
WELDERS
Coil Joiner, w/Miller Maxstar 175 CC/DC
Inverter Welder
LINCOLN 355 Square Wave Tig and Stick Arc
Welder, 350-Amp, AC/DC
KAESER MDL. SK26 20-HP. SCREW AIR COMPRESSOR, S/N 1188
(4) MILLER TIG RIG 400 SS Welders
ELECTROHEAT 150 Tube Welder
THERMATOOL VT-60 Tube Welder
AIR COMPRESSORS
KAESER SK26 20 Hp. Screw Air Compressor, 2003
AIRCO 300-Amp AC/DC Heliwelder IV
Welding Machine
25 Hp. Air Compressor
LINDE V1252 250-Amp Mig Welder
ATLAS COPCO FD40 Air Dryer, w/Horizontal Tank
MILLER 100-Amp ARC Welder
(8) MILLER ECONOTWIN HF 50-Amp AC/DC
Arc Welders
(5) MILLER Auto Arc Tig Precision Welders
DoALL Flash Butt Welder
HYSTER 15,000-LB. CAPACITY PROPANE FORKLIFT
FORKLIFTS
HYSTER H110XL Riding Propane 15,000-LB. Forklift, w/2-Stage
Mast, 126" Lift Height, 52" Forks, S/N D177B24223S
HYSTER H60XM Riding Propane 6,000-LB. Forklift,
w/2-Stage Mast, 126" Lift Height, 52" Forks
HYSTER 6,000-LB. CAPACITY PROPANE FORKLIFT
SOME ITEMS MAY BE SUBJECT TO PRIOR SALE
This Sale will be a “Webcast” auction, which enables you to bid securely in real-time from the comfort of your own
computer. To utilize this service, register with Michael Fox International at www.michaelfox.com. To learn more about
how a webcast works, please go to the Support section on our homepage and choose “Webcast Instructions.”
TERMS OF SALE
NO WARRANTIES: Every item and lot in the “Auction” is sold: (a) “AS IS, WHERE IS, AND WITHOUT RECOURSE,”
and (b) with no warranties, guarantees or representation of any kind or variety, whether expressed, implied or otherwise.
Some items subject to prior sale and removal.
PAYMENT: A 10% buyer’s premium applies to the purchase price of all on-site purchases. A 13.5% buyer’s premium
applies to the purchase price of all on-line purchases. A minimum deposit of 25% will be required in order to bid. Cash or
certified funds required in full at the time and place of auction. Non-certified checks will NOT be accepted unless
accompanied by a valid bank letter of guarantee, which must be in the following format: This bank guarantees payment to
Michael Fox International, Inc. from (name of customer) on account #_________ up to the amount of $______. This letter
is valid for purchases at the auction held at Ohio Rollform Equipment, Inc. on February 22.
AUCTION SITE
6607 CHITTENDEN ROAD
HUDSON, OHIO
Airport
INSPECTION
Monday, February 21 from 10:00 A.M. to 4:00 P.M. or by appointment.
REMOVAL
All equipment be removed no later than Friday, March 11.
AIRPORT & TRANSPORTATION
The area is served by the Akron/Canton Airport, approximately 22 miles south of the auction site, and the Cleveland
International Airport, approximately 28 miles northwest of the auction site.
OVERNIGHT ACCOMMODATIONS
Holiday Inn (Auction Headquarters) ............................................................................................................... (330) 653-9191
Sheraton........................................................................................................................................................... (330) 929-3000
Baymont........................................................................................................................................................... (330) 468-5400
FINANCING YOUR AUCTION PURCHASE
Conserve Your Cash and Increase Your Bidding Power. AuctionLease Provides
M&E Financing With Approvals from $5,000 to $999,000.
(800) 438-1470 • Apply Online: www.AuctionLease.com
“Buy What Appreciates, Lease What Depreciates.” – J. Paul Getty
INFORMATION PROVIDED IS BELIEVED TO BE ACCURATE, BUT IS NOT GUARANTEED
Airport
DIRECTIONS
From Cleveland International Airport: Snow Road to I-71 South to I-80
East to Exit 180. Route 8 South to Route 303 East (Hudson/Peninsula). Go under
Route 8 overpass and make an immediate left turn onto Chittenden Road. Go
one mile down Chittenden Road to auction site on the right.
From Akron/Canton Airport: I-77 North to Route 8 North to Route 303
(Hudson/Peninsula). Go directly across Route 303 from Route 8 onto Chittenden
Road. Go one mile down Chittenden Road to auction site on the right.
PLANT CLOSED! EVERYTHING MUST BE SOLD!
ROLLFORMERS • UNCOILERS • CNC LATHE • MACHINE SHOP • PRESSES
FIRST CLASS MAIL
NORTH AMERICAN OFFICES
CALIFORNIA, CANADA, FLORIDA, ILLINOIS, MARYLAND, NEBRASKA, NEW YORK, OREGON,
PENNSYLVANIA, TEXAS, WASHINGTON, ADDITIONAL OFFICES WORLDWIDE
EXECUTIVE OFFICES
11425 CRONHILL DRIVE, OWINGS MILLS, MARYLAND 21117
(410) 654-7500 • (800) 722-3334 • Fax (410) 654-5876
40 OFFICES IN 20 COUNTRIES
GoIndustry • Michael Fox International • Henry Butcher International • Karner & Co. • Appelboom
www.industrialauctioneers.org
http://www.michaelfox.com
e-mail: info@ michaelfox.com
OHIO ROLLFORM EQUIPMENT, INC.
HUDSON, OHIO
TUESDAY, FEBRUARY 22 AT 10:00 A.M.
IP-5200182
POSTMASTER: Dated Material.
Please Deliver Promptly.
Presorted
First Class Mail
U.S. Postage
PAID
Eugene, Oregon
Permit No. 305