rg321

1257_29_38_Eng
2/21/07
10:52 AM
Page B29
INDUSTRIAL STEEL SHELVING
MAIN FEATURES:
• Standard colour is light grey
• No-bolt shelf design saves up to
80% of installation time
• Employs an innovative shelf clip,
which slips into a slotted "T" post
• Shelves are 18-gauge steel with
a 630 lbs. cap. (36" W) and
315 lbs. cap. (48" W) for
evenly distributed loads
• Shelves come in various
sizes with a height of 1"
• Extra shelves may be added to
standard units to increase
storage capacities
• Shelves are adjustable every 2"
• All units shipped knocked down
OPEN TYPE SHELVING
• Provides strong and economical storage
systems for any plant, warehouse or office
• Starter units include number of shelves
required for application, 4 "T" posts,
2 pairs of side sway braces and 1 pair of
back sway braces
• Same for add-on units, except
only 1 pair of side sway braces,
and 2 posts are required
Model
No.
Height
Wt.
lbs.
6'4"
7'4"
8'4"
10.0
8.0
9.0
• Starter units include number
of shelves required for application,
2 end panels, 1 back panel
and 1 base plate
• Same for add-on units, except
only 1 end panel is required
Model
No.
Dimensions
WxH
Wt.
lbs.
BACK PANELS
RK470
RK468
RK471
RK469
48" x 6'4"
48" x 7'4"
36" x 6'4"
36" x 7'4"
25.5
29.5
19.0
22.0
SIDE PANELS
POSTS
RK550
RK551
RK548
CLOSED TYPE
SHELVING
RK522
RK523
RK530
RK531
RK537
RK538
BRACES
RK472
Back braces (pr.)
4.0
RC453
Gussets (pr.)
1.0
RK565
Side braces (pr.)
2.0
For shelves & other components see below
12" x 6'4"
12" x 7'4"
24" x 6'4"
24" x 7'4"
18" x 6'4"
18" x 7'4"
21.0
23.5
27.0
31.0
24.0
27.0
DOORS
RK575
36" x 6'4"
43.0
RK576
36" x 7'4"
50.0
For shelves & other components see below
To order open or closed type shelving, determine the height, the number of shelves, and the shelf dimensions that suit
your application. If multiple units are to be connected, order one starter unit, and add-on units for the balance. If a
larger number of shelves are required than the units shown, order extra shelves. Shelves may be added at 2" intervals.
Styles available are unlimited, please contact us.
STANDARD COMPONENTS
Model
No.
FOR BOTH OPEN AND CLOSED SHELVING
RC136
With 72 Shelf
Boxes RC486
Model
No.
W"
Shelf Size
x
D"
Wt.
lbs.
36
36
36
48
48
48
x
x
x
x
x
x
12
18
24
12
18
24
8
12
15
11
15
19
x
x
x
x
x
x
12
12
12
6
6
6
1.25
2.0
2.75
.50
1.0
1.5
SHELF DIVIDERS
RK491
RK493
RK494
RK503
RK505
RK506
12
18
24
12
18
24
Wt.
lbs.
36 x 1
36 x 2
36 x 3
1.75
2.0
2.5
36 x 3
48 x 3
2.0
2.5
BIN FRONTS
SHELVES
RK552
RK558
RK561
RK554
RK560
RK563
Shelf Size
W" x H"
RK475
RK477
RK479
BASE PLATES
RK483
RK485
SHELF BOXES
Model
No.
RK566
RK569
RK570
RK573
RK574
W"
5 5/8
5 5/8
5 5/8
5 5/8
11
x
x
x
x
x
x
Dimensions
D"
x
12
x
18
x
12
x
18
x
18
x
H"
2 3/4
2 3/4
4 3/4
4 3/4
4 3/4
Wt.
lbs.
2.5
3.5
3.5
4.5
5.0
EXTRA DIVIDERS
Model
No.
RC508
Dimensions
W" x H"
5 5/8 x 2 3/4
Wt.
lbs.
0.1
INDUSTRIAL STEEL SHELVING UNITS - 48" WIDE X 7'4" HIGH
Note: Individual
bay heights are
approximate.
Contains: 3 Bays 48" Wide x 28" High
Depth"
Starter Unit
Add-on Unit
12
RK285
RK284
18
RK287
RK286
24
RK289
RK288
Contains: 6 Bays 48" Wide x 14" High
Depth"
Starter Unit
Add-on Unit
12
RK297
RK296
18
RK299
RK298
24
RK301
RK300
18855E
Contains: 3 Bays 48" Wide x 28" High
Depth"
Starter Unit
Add-on Unit
12
RK291
RK290
18
RK293
RK292
24
RK295
RK294
Contains: 6 Bays 48" Wide x 14" High
Depth"
Starter Unit
Add-on Unit
12
RK303
RK302
18
RK305
RK304
24
RK307
RK306
B29
1257_29_38_Eng
2/21/07
10:52 AM
Page B30
STEEL SHELVING UNITS - 36"W X 6'4"H
Contains: 3 Bays 36" Wide x 24" High Contains: 6 Bays 36" Wide x 12" High
Depth"
12
18
24
Starter Unit
RK205
RK207
RK209
Add-On Unit
RK204
RK206
RK208
Depth"
12
18
24
Starter Unit
RK217
RK219
RK221
Contains: 3 Bays 36" Wide x 24" High Contains: 6 Bays 36" Wide x 12" High
Depth"
12
18
24
Starter Unit
RK211
RK213
RK215
Add-On Unit
RK210
RK212
RK214
Contains: 3 Bays 36" Wide x 24" High
Complete with Locking,
Swinging Doors
Depth"
12
18
24
Starter Unit
RK849
RK850
RK851
Add-On Unit
RK852
RK853
RK854
Depth"
12
18
24
Starter Unit
RK223
RK225
RK227
Add-On Unit
RK222
RK224
RK226
Contains: 6 Bays 36" Wide x 12" High
Complete with Locking,
Swinging Doors
Depth"
12
18
24
Starter Unit
RK855
RK856
RK857
Contains: 9 Bays 36" Wide x 8" High
Contains: 12 Bays 36" Wide x 6" High
Depth"
12
18
24
Depth"
12
18
24
Add-On Unit
RK216
RK218
RK220
Add-On Unit
RK858
RK859
RK860
Add-On Unit
RK228
RK230
RK232
Starter Unit
RK241
RK243
RK245
Add-On Unit
RK240
RK242
RK244
Contains: 9 Bays 36" Wide x 8" High
Contains: 12 Bays 36" Wide x 6" High
Depth"
12
18
24
Depth"
12
18
24
Starter Unit
RK235
RK237
RK239
Add-On Unit
RK234
RK236
RK238
Starter Unit
RK247
RK249
RK251
Add-On Unit
RK246
RK248
RK250
Contains: 2 Bays 36" Wide x 12" High
6 Bays 36" Wide x 8" High
Complete with Locking,
Swinging Doors
Contains: 2 Bays 36" Wide x 12" High
8 Bays 36" Wide x 6" High
Complete with Locking,
Swinging Doors
Depth"
12
18
24
Depth"
12
18
24
Note: Individual bay heights are approximate.
B30
Starter Unit
RK229
RK231
RK233
18857E
Starter Unit
RK957
RK954
RK956
Add-On Unit
RK952
RK953
RK955
Starter Unit
RK958
RK961
RK963
Add-On Unit
RK960
RK959
RK962
1257_29_38_Eng
2/21/07
10:52 AM
Page B31
STEEL SHELVING UNITS - 36"W X 6'4"H
Contains: 2 Bays 36" W x 24" H
4 Compartments
18" W x 12" H
Depth"
12
18
24
Starter Unit
RK253
RK255
RK257
Add-On Unit
RK252
RK254
RK256
Contains: 1 Bay 36" W x 12" H
6 Compartments
18" W x 12" H
1 Bay 36" W x 24" H
Complete with Locking,
Swinging Doors
Depth"
12
18
24
Starter Unit
RK963
RK965
RK967
Add-On Unit
RK868
RK864
RK866
Contains: 108 Metal Shelf Boxes
(drawers)
5 5/8" W x 2 3/4" H
Depth"
12
18
Starter Unit
RK980
RK982
Add-On Unit
RK979
RK981
Contains:
Depth"
12
18
24
Contains:
Depth"
12
18
Contains: 18 Compartments
12" W x 12" H
4 Compartments 18" W x 12" H
9 Compartments 12" W x 12" H
1 Bay 36" W x 12" H
Starter Unit
RK259
RK261
RK263
Add-On Unit
RK258
RK260
RK262
Depth"
12
18
24
18 Compartments 6" W x 6" H
complete with 1" Bin Fronts
30 Metal Shelf Boxes (drawers)
5 5/8" W x 4 3/4" H
6 Compartments 12" W x 2" H
complete with 3" Bin Fronts
Starter Unit
RK970
RK868
Add-On Unit
RK969
RK971
Starter Unit
RK277
RK886
Add-On Unit
RK264
RK266
RK268
Contains: 18 Compartments
12" W x 12" H
Complete with Locking,
Swinging Doors
Depth"
12
18
24
Starter Unit
RK871
RK976
RK978
Add-On Unit
RK973
RK975
RK977
Contains: 42 Metal Shelf Boxes
(drawers)
5 5/8" W x 4 3/4" H
15 Metal Shelf Boxes
(drawers) 11" W x 4 3/4" H
Contains: 36 Metal Shelf Boxes
(drawers)
11" W x 4 3/4" H
Depth"
12
18
Starter Unit
RK265
RK267
RK269
Add-On Unit
RK276
RK983
Depth"
12
18
Starter Unit
RK986
RK890
Add-On Unit
RK891
RK987
Contains: 72 Compartments
6" W x 6" H
Depth"
12
18
24
Starter Unit
RK271
RK273
RK275
Add-On Unit
RK270
RK272
RK274
Contains: 72 Metal Shelf Boxes
(drawers)
5 5/8" Wx 4 3/4" H
Depth"
12
18
Starter Unit
RK877
RK878
Add-On Unit
RK879
RK880
Contains: 72 Compartments
6" W x 6" H
Complete with 1"
Bin-Fronts
Depth"
12
18
24
Starter Unit
RK279
RK281
RK283
Add-On Unit
RK278
RK280
RK282
Note: Individual bay heights are approximate.
18462E
B31
1257_29_38_Eng
2/21/07
10:52 AM
Page B32
STEEL SHELVING UNITS - 36"W X 7'4"H
Contains: 3 Bays 36" Wide x 28" High
Contains: 6 Bays 36" Wide x 14" High
Contains: 7 Bays 36" Wide x 12" High
Contains: 14 Bays 36" Wide x 6" High
Depth" Starter Unit
12
RK309
18
RK311
24
RK313
Depth"
12
18
24
Depth"
12
18
24
Depth"
12
18
24
Add-On Unit
RK308
RK310
RK312
Starter Unit
RK333
RK335
RK337
Add-On Unit
RK332
RK334
RK336
Starter Unit
RK321
RK323
RK325
Add-On Unit
RK320
RK322
RK324
Starter Unit
RK345
RK347
RK349
Add-On Unit
RK344
RK346
RK348
Contains: 3 Bays 36" Wide x 28"High
Contains: 6 Bays 36" Wide x 14" High
Contains: 7 Bays 36" Wide x 12" High
Contains: 14 Bays 36" Wide x 6" High
Depth" Starter Unit Add-On Unit
12
RK315
RK314
18
RK317
RK316
24
RK319
RK318
Depth"
12
18
24
Depth"
12
18
24
Depth"
12
18
24
Contains: 3 Bays 36" Wide x
28" High
Complete with
Locking, Swinging Door
Contains: 6 Bays 36" Wide x 14" High
Complete with Locking,
Swinging Doors
Contains: 7 Bays 36" Wide x 12" High
Complete with Locking,
Swinging Doors
Contains: 8 Bays 36" Wide x 6" High
3 Bays 36" Wide x 12" High
Complete with Locking,
Swinging Doors
Depth" Starter Unit
12
RK893
18
RK894
24
RK895
Depth"
12
18
24
Depth"
12
18
24
Depth"
12
18
24
Add-On Unit
RK896
RK897
RK898
Starter Unit
RK339
RK341
RK343
Starter Unit
RK899
RK900
RK989
Add-On Unit
RK338
RK340
RK342
Add-On Unit
RK902
RK903
RK904
Note: Individual bay heights are approximate.
B32
18860E
Starter Unit
RK327
RK329
RK331
Starter Unit
RK991
RK993
RL020
Add-On Unit
RK326
RK328
RK330
Add-On Unit
RK990
RK992
RL021
Starter Unit
RK351
RK353
RK355
Starter Unit
RK996
RK998
RL001
Add-On Unit
RK350
RK352
RK354
Add-On Unit
RK995
RK997
RK999
1257_29_38_Eng
2/21/07
10:52 AM
Page B33
STEEL SHELVING UNITS - 36"W X 7'4"H
Contains: 2 Bays 36" W x 28" H
4 Compartments
18" W x 14" H
Contains: 4 Compartments 18" Wx 14" H
9 Compartments 12" W x 14" H
1 Bay 36" Wide x 14" High
Contains: 21 Compartments
12" W x 12" H
Contains: 84 Compartments
6" W x 6" H
Depth"
12
18
24
Depth"
12
18
24
Depth"
12
18
24
Depth" Starter Unit
12
RK375
18
RK377
24
RK379
Starter Unit
RK357
RK359
RK361
Add-On Unit
RK356
RK358
RK360
Contains:1 Bay 36" W x 14" H
6 Compartments 18" W x 14" H
1 Bay 36" W x 28" H
Complete with Locking,
Swinging Doors
Depth"
12
18
24
Starter Unit
RK911
RK912
RK913
Add-On Unit
RK914
RK915
RK916
Starter Unit
RK363
RK365
RK367
Add-On Unit
RK362
RK364
RK366
Contains:9 Compartments 12" W, 12" H
complete with 3" Compartments
fronts 18 Compartments 6" W x 6" H
complete with 1" Compartment
fronts 30 Metal Shelf Boxes
(drawers) 5 5/8" W x 4 3/4" H
Depth"
12
18
Starter Unit
RK917
RK918
Add-On Unit
RK919
RK920
Starter Unit
RK369
RK371
RK373
Add-On Unit
RK368
RK370
RK372
Contains: 21 Compartments
12" W x 12" H
Complete with Locking,
Swinging Doors
Contains: 84 Metal Shelf Boxes
(drawers)
5 5/8" W x 4 3/4" H
Depth"
12
18
24
Depth" Starter Unit Add-On Unit
12
RK927
RK929
18
RK928
RK930
Starter Unit
RK921
RK922
RK923
Add-On Unit
RK924
RK925
RK926
Contains: 126 Metal Shelf Boxes
(drawers)
5 5/8" W x 2 3/4" H
Contains: 42 Metal Shelf Boxes
(drawers)
11" W x 4 3/4" H
Contains: 54 Metal Shelf Boxes (drawers)
Depth"
12
18
Depth"
12
18
Depth"
12
18
Starter Unit
RK931
RK932
Add-On Unit
RK933
RK934
Starter Unit
RK381
RK936
5 5/8" W x 4 3/4" H
15 Metal Shelf Boxes (drawers)
11" W x 4 3/4" H
Add-On Unit
RK380
RK938
Add-On Unit
RK374
RK376
RK378
Starter Unit
RK939
RK940
Add-On Unit
RK941
RK942
Contains: 84 Compartments
6" W x 6" H
Complete with 1"
Compartment Fronts
Depth" Starter Unit
12
RK383
18
RK385
24
RK387
Add-On Unit
RK382
RK384
RK386
Note: Individual bay heights are approximate.
18862E
B33
1257_29_38_Eng
2/21/07
10:52 AM
Page B34
STEEL SHELVING UNITS - 36" W X 8'4" H
Contains:
Depth"
12
18
24
Contains:
Open Type
6 Bays 36" W x 16" H
Starter Unit
RK389
RK391
RK393
Add-On Unit
RK388
RK390
RK392
6 Bays 36" W x 16" H
Depth" Starter Unit
12
RK395
18
RK397
24
RK399
Add-On Unit
RK394
RK396
RK398
Contains:
Open Type
8 Bays 36" W x 12" H
Contains:
Depth"
12
18
24
Starter Unit
RK401
RK403
RK405
Depth"
12
18
24
Contains:
Depth"
12
18
24
Contains: 1 Bay 36" W x 16" H
12 Compartments 12" W x 14" H
1 Bay 36" W x 24" H
Contains:
Depth"
12
18
24
Depth"
12
18
24
Starter Unit
RK437
RK439
RK441
Add-On Unit
RK436
RK438
RK440
Add-On Unit
RK400
RK402
RK404
8 Bays 36" W x 12" H
Starter Unit
RK407
RK409
RK411
Add-On Unit
RK406
RK408
RK410
24 Compartments
12" Wx 12" H
Starter Unit
RK443
RK445
RK447
Add-On Unit
RK442
RK444
RK446
Contains:
Depth"
12
18
24
Contains:
Depth"
12
18
24
Note: Individual bay heights are approximate.
B34
18864E
Open Type
12 Bays 36" W x 8" H
Starter Unit
RK413
RK415
RK417
Add-On Unit
RK412
RK414
RK416
12 Bays 36" W x 12" H
Starter Unit
RK419
RK421
RK423
Add-On Unit
RK418
RK420
RK422
48 Compartments
9" W x 8" H
Starter Unit
RK449
RK451
RK453
Add-On Unit
RK448
RK450
RK452
Contains:
Depth"
12
18
24
Contains:
Depth"
12
18
24
Contains:
Depth"
12
18
24
Open Type
4 Bays 36" W x 24" H
Starter Unit
RK425
RK427
RK429
Add-On Unit
RK424
RK426
RK428
4 Bays 36" W x 24" H
Starter Unit
RK431
RK433
RK435
Add-On Unit
RK430
RK432
RK434
1 Bay 36" W x 12" H
12 Compartments
18" W x 14" H
Starter Unit
RK455
RK457
RK459
Add-On Unit
RK454
RK456
RK458
1257_29_38_Eng
2/21/07
10:52 AM
Page B35
SLOTTED ANGLE SHELVING
SLOTTED ANGLE SHELVING
SLOTTED ANGLE SHELVING
• Ideal for shelving and storage systems, work benches, tubing storage,
protective framing around machinery, platforms around assembly projects, etc.
• Choose from the various components available, or pre-configured shelf units
• Unique boltless clip design allows for adjustability of shelves easily and effortlessly
• To ensure stability, it is recommended that 3 shelf levels are bolted when using
boltless clips
Size
W" x L"
12 x 36
18 x 36
24 x 36
12 x 48
18 x 48
24 x 48
6 Shelves/72" Post
Model No.
Open
Closed
RH701
RH774
RH702
RH775
RH703
RH776
RH704
RH777
RH705
RH778
RH706
RH779
7 Shelves/84" Post
Model No.
Open
Closed
RH707
RH780
RH708
RH781
RH709
RH782
RH710
RH783
RH711
RH784
RH712
RH785
8 Shelves/96" Post
Model No.
Open
Closed
RH713
RH786
RH714
RH787
RH715
RH788
RH716
RH789
RH717
RH790
RH718
RH791
All shelving units include 4 posts (1 3/8" x 1 3/8" slotted angle), shelves, panels
(for closed units), plastic feet and all necessary hardware.
Model
No.
Dimensions
W" x D"
Angle
Length'
Steel
Gauge
Colour
UDL*
Wt.
lbs.
SLOTTED ANGLE (14 GAUGE)
RG979
RG980
RG981
RG982
RG983
RG984
RG320
RG321
1 3/8
1 3/8
1 3/8
2 1/2
2 1/2
2 1/2
3
3
x
x
x
x
x
x
x
x
1 3/8
1 3/8
1 3/8
1 5/8
1 5/8
1 5/8
1 1/2
1 1/2
8
10
12
8
10
12
10
12
14
14
14
14
14
14
12
12
Grey
Grey
Grey
Grey
Grey
Grey
Galvanized
Galvanized
—
—
—
—
—
—
—
—
6
7
8.5
9
11
13
14
17
—
—
—
—
—
—
—
—
—
20
20
20
20
18
20
20
20
19
Galvanized
Galvanized
Galvanized
Galvanized
Galvanized
Galvanized
Galvanized
Galvanized
Galvanized
450
450
450
450
300
350
350
350
400
7
8.3
9.6
12.2
23.7
9.2
10.9
12.6
18.5
SHELVES (20 GAUGE)
RG985
RG986
RG987
RG988
RG989
RG990
RG991
RG992
RG993
RH774
RH701
12
15
18
24
32
12
15
18
24
x
x
x
x
x
x
x
x
x
36
36
36
36
42
48
48
48
48
*UDL: Maximum uniformly distributed load allowance where maximum shelf deflection
is fully recovered when load is removed.
BACK PANELS
SIDE PANELS
Model
No.
RH759
RH760
RH761
RH762
RH763
RH764
RH765
RH766
RH767
Type 300
3" x 1 1/2"
Type 225
2 1/2" x 1 5/8"
Type 140
1 3/8" x 1 3/8"
Dimensions
W" x H"
12 x 72
18 x 72
24 x 72
12 x 84
18 x 84
24 x 84
12 x 96
18 x 96
24 x 96
Steel
Gauge
24
24
24
24
24
24
24
24
24
Wt.
lbs.
7
11
15
8
13
17
10
14
19
Model
No.
RH768
RH769
RH770
RH771
RH772
RH773
Dimensions
W" x H"
36 x 72
48 x 72
36 x 84
48 x 84
36 x 96
48 x 96
Steel
Gauge
24
24
24
24
24
24
Wt.
lbs.
22
29
25
34
29
38
20
20
1.3
1.7
KICK PANELS
RH792
RH793
36 x
48 x
3
3
STEEL SLOTTED ANGLE ALLOWS YOU TO DESIGN AND BUILD ANYTHING TO YOUR OWN SPECIFICATIONS:
Metal Decking
Tubing Storage
Overhead Storage
Overhead Storage
Wide Storage
Special Work Benches
SLOTTED ANGLE ACCESSORIES
CORNER GUSSET PLATE
• Add strength and rigidity to your slotted angle assembly
• 3" W x 3" L
Model No. RG994
RG996
RG237
RG994
PLASTIC FEET
• Accomodate single or double 1 3/8" x 1 3/8" angle posts
Model No. RG237 single post
Model No. RG238 double "T" post
ACCESSORIES
Model No.
RG994
RG995
RG996
RG237
RG238
10966E
Description
Corner gusset plate 3"
Nut and bolt
Boltless shelf clip
Plastic foot (simple post)
Plastic foot (double post)
Wt. lbs.
0.70
0.05
0.60
0.02
0.03
B35
1257_29_38_Eng
2/21/07
10:53 AM
Page B36
WIRE SHELVING
WIRE SHELVING
• Heavy-gauge chrome-plated shelves with open wire design minimize dust,
improve air circulation and provide greater visibility of stored items
• Post's circular grooves combined with tapered plastic split
sleeves allow for assembly in minutes with no special tools
• Shelf ribs run front to back allowing items to slide on and off shelves smoothly
• Shelves can be adjusted at precise 1" intervals Posts are double grooved every
8" and numbered for easy adjustment
• Adjustable feet compensate for surface irregularities
Use S hooks to eliminate
two posts per adjacent
shelf. 2 required per shelf.
COMPLETE SHELVING UNITS
Model
No.
RL055
D"
Dimensions
x
W" x
18
18
18
18
18
18
18
18
24
24
24
24
24
24
24
24
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
36
36
48
48
60
60
72
72
36
36
48
48
60
60
72
72
RL075
Starter
18
RL076
Add-on
18
RL077
Starter
18
RL078
Add-on
18
RL079
Starter
18
RL080
Add-on
18
RL081
Starter
18
RL082
Add-on
18
RL083
Starter
24
RL084
Add-on
24
RL085
Starter
24
RL086
Add-on
24
RL087
Starter
24
RL088
Add-on
24
RL089
Starter
24
RL090
Add-on
24
* Evenly distributed weight
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
36
36
48
48
60
60
72
72
36
36
48
48
60
60
72
72
Type
H"
Cap lbs*
/ shelf
No. of
Shelves
Wt.
lbs.
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
800
800
800
800
600
600
600
600
800
800
800
800
600
600
600
600
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
48
3.5
58
53.5
81
76.5
91
86.5
62
57.5
74
69.5
95
90.5
117
112.5
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
74
74
74
74
74
74
74
74
74
74
74
74
74
74
74
74
800
800
800
800
600
600
600
600
800
800
800
800
600
600
600
600
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
67.75
58.25
80.25
70.75
109
99.5
121.5
112
85.25
75.75
100.25
90.75
126.5
117
154
144.5
4 SHELVES
RL059
RL060
RL061
RL062
RL063
RL064
RL065
RL066
RL067
RL068
RL069
RL070
RL071
RL072
RL073
RL074
Starter
Add-on
Starter
Add-on
Starter
Add-on
Starter
Add-on
Starter
Add-on
Starter
Add-on
Starter
Add-on
Starter
Add-on
NEW!
RL056
5 SHELVES
RL045
ACCESSORIES
Model No.
Description
RL048
Caster, 5", no Brake
RL049
Caster, 5", With Brake
RL050
Divider for Shelf, 18"
RL051
Divider for Shelf, 24"
RL052
Handle 18" - Can only be used with utility carts
RL053
Handle 24" - Can only be used with utility carts
RL054
Split Sleeves, Black 4 Pc/Bag
RL055
S-Hook for Attaching Add-On
RL056
Leveling Feet (Die Cast and Foot Bolt)
RL057
Die Cast for Leveling Feet
RL058
Foot Bolt for Leveling Feet
*Note: 18" and 24" handle can only be used with utility carts
Weight lbs.
2.8
2.7
1.7
2.2
3.9
4.4
0.1
0.1
0.2
0.1
0.1
RL054
WIRE SHELVES
Model
No.
D"
RL035
18
RL036
18
RL037
18
RL038
18
RL039
18
RL040
24
RL041
24
RL042
24
RL043
24
* Evenly distributed weight
B36
Dimensions
x
x
x
x
x
x
x
x
x
x
W"
30
36
48
60
72
36
48
60
72
Cap lbs. *
/ Shelf
800
800
800
600
600
800
800
600
600
Wt.
lbs.
8.5
9.75
1.25
18
20.5
13.25
16.25
21.5
27
18463E
RL050
POSTS
Model No
RL044
RL045
RL046
RL047
Height"
54
63
74
86
Wt. lbs.
6.3
7
8
8.8
1257_29_38_Eng
2/21/07
10:53 AM
Page B37
WIRE SHELVES CARTS
STANDARD DUTY
UTILITY CARTS
•
•
•
•
•
•
•
NEW!
A durable, dependable transport solution that’s easy to maneuver
Highly rigid construction lets you easily adjust at 1” increments
Durable chrome plated handles, shelves and posts
Overall height: 39”
Capacity: Up to 375 lbs with rubber casters of evenly distributed weight
Includes: 2 handles, indicated number of shelves, and casters
Shipped knocked down
Model
No
D"
Dimensions
x
W"
No. of
Shelves
Wt.
lbs.
18
18
18
18
24
24
24
x
x
x
x
x
x
x
30
36
48
60
36
48
60
2
2
2
2
2
2
2
36.5
40.25
44.75
54
47.75
53.75
63.5
18
18
18
18
24
24
24
x
x
x
x
x
x
x
30
36
48
60
36
48
60
3
3
3
3
3
3
3
45
50
57
72
61
70
85
2 SHELVES
MK781
MK782
MK783
MK784
MK785
MK786
MK787
3 SHELVES
MJ539
MJ540
MJ541
MJ542
MJ543
MJ544
MJ545
WIRE SHELF CARTS
• Open-wire shelf design minimizes dust and
increases air circulation and visibility
• High quality chrome-plated shelves and posts prevent corrosion
• Wire shelves can be adjusted easily and quickly
• Capacity: Up to 600 lbs of evenly distributed weight with rubber casters
• Includes: 5" resilient rubber casters (two swivel,
two w/brake) and donut bumpers
• Ship knocked down
NEW!
Model
No
D"
x
Dimensions
W"
x
H"
No. of
Shelves
Wt.
lbs.
4 SHELVES
MJ527
MJ528
MJ529
MJ530
MJ531
MJ532
18
18
18
24
24
24
x
x
x
x
x
x
36
48
60
36
48
60
x
x
x
x
x
x
74
74
74
74
74
74
4
4
4
4
4
4
64
74
94
78
90
110
x
x
x
x
x
x
36
48
60
36
48
60
x
x
x
x
x
x
86
86
86
86
86
86
5
5
5
5
5
5
68
78
98
82
94
114
5 SHELVES
MJ533
MJ534
MJ535
MJ536
MJ537
MJ538
18
18
18
24
24
24
18464E
B37
1257_29_38_Eng
2/21/07
10:53 AM
Page B38
PLASTIC SHELVING
METROMAX® STORAGE SYSTEM
METROMAX® STEM
CASTER CARTS
The most versatile storage system ever introduced. Open shelf mats are easy
to remove for cleaning. Solid shelf mats, dividers, ledges, drop-in wire baskets,
and an array of accessories, can easily be added or removed in seconds.
Includes
Completely Mobile with the addition of 5" casters.
Includes
Strong and Durable: Reinforced polymers give MetroMax® incredible strength; 800 lbs. per shelf
up to 42" in length and 600 lbs. per shelf up to 72" in length. Also, shelves won't mark or crease.
Corrosion and Rust Proof: MetroMax® has a lifetime warranty against corrosion
and rust, so it's perfect for damp, humid conditions as well as dry storage.
Ideal system for cooler
/freezer applications,
designed to withstand
years of use. Corrosion
-proof materials provide a lifetime of worry-free
use. Removeable and dishwasher safe polymer
shelf mats make cleaning this system quick and
efficient. Mobile MetroMax® storage carts come
complete with 4 shelves (open grid or solid mat),
four 63" posts, wedge connectors and four 5"
poly casters (2 swivel/2 with brake). Approximate
height of cart: 69". Capacity/unit: 900 lbs.
Fast, Easy Assembly: MetroMax® assembles easily in minutes, without tools. Posts have
numbered grooves at 1" increments, with 1/2" increment adjustment. Wedge lock connectors, with
window and pointer to locate desired post groove, snap onto posts. Simply attach the wedge lock
connectors at the desired post height and lower the shelf into place. With unit complete, solid shelf
and open-grid mats can be removed and/or interchanged at any time.
WITH OPEN GRID SHELVES*
Model
No.
RG484
RG485
RG486
RG487
RG488
RG489
W"
18
18
18
24
24
24
Shelf
x
x
x
x
x
x
x
L"
36
48
60
36
48
60
Wt.
lbs.
74
86
98
82
98
114
WITH SOLID MAT SHELVES*
Model
Shelf
Wt.
No.
W"
x
L"
lbs.
RG490
18
x
36
74
RG491
18
x
48
90
RG492
18
x
60
106
RG493
24
x
36
86
RG494
24
x
48
106
RG495
24
x
60
122
* Also available with rubber casters (cap.: 600 lbs.)
TM
METROMAX Q
STORAGE SYSTEM
Quick to assemble Quick to
adjust Quick to set-up
Easy and quick shelf
adjustment: MetroMax QTM
adjusts easily without any
tools. The patented corner
lock release allows for shelf
adjustment in seconds,
even while supplies remain
on other shelves. Simply
flip the corner lock release
to create an adjustable shelf
that can be repositioned in
no time at all.
Slide the shelf above the wedge lock connectors
at the desired position and instantly gain the
space you need. A completely versatile unit: shelf
METROMAX® SHELVES*
Shelf
Size"
18 x 24
18 x 30
18 x 36
18 x 42
18 x 48
18 x 54
18 x 60
18 x 72
24 x 24
24 x 30
24 x 36
24 x 42
24 x 48
24 x 54
24 x 60
Open Grid
Model No.
RC538
RC540
RC542
RC549
RC551
RC558
RC560
RC561
RC563
RC565
RC567
RC569
RC571
RC573
RC575
Wt.
lbs.
9
11
12
14
15
17
18
18
11
13
14
16
18
20
2
Solid Shelf
Model No.
RC537
RC539
RC541
RC548
RC550
RC557
RC559
RC562
RC564
RC566
RC568
RC570
RC572
RC574
Wt.
lbs.
11
12
14
16
18
20
22
13
15
17
19
22
24
26
METROMAX® POSTS
Model
No.
RC536
RC579
RC582
RC585
RC588
RC589
Wt.
lbs.
.5
1
1.5
2
2.25
2.5
Height"
13
33
54
63
74
86
*Shelf c/w frame, mat and wedge lock connectors
mats and supportbeams can be removed in
seconds to convert a shelf into an open frame.
Easily converts into a mobile unit, with the
addition of casters. Accessories, such as wire
drop-in baskets, dividers, ledges, totes etc. allow
complete customization of unit. Corrosion and
rust proof: MetroMax® Q's polymer framework
carries a 15 year warranty against rust and
corrosion on posts and a lifetime warranty on
shelf mats.
METROMAX Q™ POSTS
Model
No.
RG341
RG342
RG343
RG344
RG345
RG346
Wt.
lbs.
0.5
1.0
1.5
2.0
2.25
2.50
Height"
13
33
54
63
74
86
METROMAX Q™ SHELVES*
Model
No.
RG325
RG326
RG327
RG328
RG329
RG330
RG331
RG332
RG333
RG334
RG335
RG336
RG337
RG338
RG339
RG340
W"
18
18
18
18
18
18
18
18
24
24
24
24
24
24
24
24
Shelf Size
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
L"
24
30
36
42
48
54
60
72
24
30
36
42
48
54
60
72
Wt.
lbs.
10
11
12
14
16
18
20
23
11
14
15
17
19
21
23
29
*Shelf comes with frame, mat and 4 wedge lock connectors.
METROMAX QTM
ACCESSORIES
SOLID MAT OVERLAY KITS
• Covers standard grid shelf to create a solid shelf
SHELF DIVIDERS
• 6" high
• Clip into place an can be positioned and repositioned
to create the exact storage area required
• Finished with tough corrosion-resistant grey epoxy
SHELF LEDGES
• 6" high
• Clip onto shelves easily and quickly
• Finished with tough corrosion resistant grey epoxy
B38
SOLID MAT
OVERLAY KITS
Model No.
RG347
RG348
RG349
RG350
RG351
RG352
RG353
W"
18
18
18
18
18
18
24
x
x
x
x
x
x
x
x
L"
24
30
36
42
48
54
60
Model No.
RG355
RG356
RG357
RG358
RG359
RG360
RG361
RG362
18466E
W"
24
24
24
24
24
24
24
24
x
x
x
x
x
x
x
x
x
L"
24
30
36
42
48
54
60
72
SHELF
LEDGES
Model
No.
L"
RG370
RG371
RG372
RG373
RG374
18
24
30
36
42
Model
No.
RG375
RG376
RG377
RG378
L"
48
54
60
72
SHELF
DIVIDERS
Model
No.
Length"
RG368
18
RG369
24
1257_39_eng
2/21/07
10:05 AM
Page B39
RACKING & SHELVING UNITS
PRONTO BULK STORAGE RACKS
• Up to 2000 lbs. capacity per shelf
• Starter unit includes two all-welded end frames, and three 5/8" presswood
shelves flush-fitted into positive locking steel shelf beams (2 per shelf)
• Add-on units include only one end frame
• Additional shelves may be added into any unit at 4" vertical centres
• For extra stability and rigidity, all units feature three safety bars per shelf
• Blue enamel finish
• Rack only units (no wood shelves) are available upon inquiry
NOTE: Not recommended for poweredlift truck applications.
Add-On Unit
Starter Unit
Assembles quickly
without bolts
24" SHELF DEPTH
36" SHELF DEPTH
48" SHELF DEPTH
Size
W' x H'
Description
Cap.
lbs.
Model
No.
Wt.
lbs.
Model
No.
Wt.
lbs.
Model
No.
Wt.
lbs.
7x8
7x8
7W
Starter
Add-on
Add'l shelf
1400
1400
1400
RA443
RA441
RA470
245
217
63
RA475
RA473
RA502
288
258
76
RA507
RA505
RA534
331
299
89
8 x 10
8 x 10
8W
Starter
Add-on
Add'l shelf
2000
2000
2000
RA453
RA451
RA471
302
268
78
RA485
RA483
RA503
351
315
93
RA517
RA515
RA535
400
362
108
8 x 12
8 x 12
8W
Starter
Add-on
Add'l shelf
2000
2000
2000
RA463
RA461
RA471
316
275
78
RA495
RA493
RA503
365
322
93
RA527
RA525
RA535
414
369
108
BULK STORAGE RACK
•
•
•
•
•
Ideal solution for storage of large and bulky items
Designed to work without nuts and bolts which allows for assembly in minutes
Shelves are adjustable among 1 1/2” increments
Optional particle board deck panels combine economy and strength and are easy to install
Units come standard with sturdy 84" high, 14-gauge posts and left
to right beams as well as 16 gauge front to back beams
• Double riveted beams lock into corner posts to eliminate back and side sway
• Durable baked gray enamel finish to resist rust and corrosion
• Ships knocked down
Dimensions
W" x D" x
48 x 24 x
48 x 36 x
48 x 48 x
60 x 24 x
60 x 36 x
60 x 48 x
72 x 24 x
72 x 36 x
72 x 48 x
96 x 24 x
96 x 36 x
96 x 48 x
96 x 24 x
96 x 36 x
96 x 48 x
H"
84
84
84
84
84
84
84
84
84
84
84
84
84
84
84
Shelf cap
lbs
1200
1200
1200
1000
1000
1000
750
750
750
800
800
800
600
600
600
3 levels
Model
No.
RL124
RL125
RL126
RL127
RL128
RL129
RL130
RL131
RL132
RL136
RL137
RL138
RL133
RL134
RL135
Weight
lbs.
62
68
74
72
78
84
74
80
86
98
104
110
86
92
98
4 levels
Model
No.
RL139
RL140
RL141
RL142
RL143
RL144
RL145
RL146
RL147
RL151
RL152
RL153
RL148
RL149
RL150
Weight
lbs.
74
82
90
88
96
104
90
98
106
122
130
138
106
114
122
20347E
Easy assembly:
Only a mallet
is needed
Particle Board Deck
Model.
Weight
No.
lbs.
RL154
20
RL155
29
RL156
39
RK016
25
RK019
37
RL157
49
RK017
29
RK020
44
RL158
59
RK018
3
RK021
59
RL159
78
RK018
39
RK021
59
RL159
78
B39
1257_40_47_eng
2/21/07
10:09 AM
Page B40
PALLET RACKING
UPRIGHTS & STRINGERS
Make every inch of your storage space count by combining standardsized uprights and stringers
(Box Type or Recessed Type) to create a racking system that is customized to your needs.
• Feature a 50 K.S.I. minimum yield to achieve higher load capacities
• Various racking accessories (below) may be added to store any specialty
items that regular racking cannot handle
• All racking is FOB Concord, Ontario
Please contact our sales department for further technical assistance.
HEAVY DUTY UPRIGHTS 27,000 LBS. CAPACITY
MEDIUM DUTY UPRIGHTS 20,000-LB CAPACITY
Depth
Depth
Height
6’
7’
8’
9’
10’
11’
12’
13’
14’
15’
16’
Height
24"
30"
36"
42"
48"
60"
RB798
RB806
RB814
RB822
RB742
RB750
RB758
RB766
RB774
RB782
RB790
RB800
RB808
RB816
RB824
RB744
RB752
RB760
RB768
RB776
RB784
RB792
RB802
RB810
RB818
RB826
RB746
RB754
RB762
RB770
RB778
RB786
RB794
RB803
RB811
RB819
RB827
RB747
RB755
RB763
RB771
RB779
RB787
RB795
RB804
RB812
RB820
RB828
RB748
RB756
RB764
RB772
RB780
RB788
RB796
RB805
RB813
RB821
RB829
RB749
RB757
RB765
RB773
RB781
RB789
RB797
Box Type
Stringer
Recessed Type
Stringer
1 5/8"
6'
7'
8'
9'
10'
11'
12'
13'
14'
15'
16'
18'
20'
22'
24'
26'
28'
30'
2 1/2"
7/8"
or
1 5/8"
Height
24"
30"
36"
42"
48"
60"
RB714
RB720
RB726
RB734
RB608
RB616
RB624
RB632
RB640
RB648
RB656
RB664
RB672
RB680
RB688
RB696
RB702
RB708
RB715
RB721
RB728
RB736
RB610
RB618
RB626
RB634
RB642
RB650
RB658
RB666
RB674
RB682
RB690
RB697
RB703
RB709
RB716
RB722
RB730
RB738
RB612
RB620
RB628
RB636
RB644
RB652
RB660
RB668
RB676
RB684
RB692
RB698
RB704
RB710
RB717
RB723
RB731
RB739
RB613
RB621
RB629
RB637
RB645
RB653
RB661
RB669
RB677
RB685
RB693
RB699
RB705
RB711
RB718
RB724
RB732
RB740
RB614
RB622
RB630
RB638
RB646
RB654
RB662
RB670
RB678
RB686
RB694
RB700
RB706
RB712
RB719
RB725
RB733
RB741
RB615
RB623
RB631
RB639
RB647
RB655
RB663
RB671
RB679
RB687
RB695
RB701
RB707
RB713
BOX TYPE STRINGERS CAP. LBS. PER PAIR
Lgth
48"
54"
60"
66"
72"
78"
84"
90"
96"
102"
108"
114"
120"
126"
132"
138"
144"
Model Cap. Model Cap. Model Cap. Model Cap. Model Cap. Model Cap. Model Cap. Model Cap. Model Cap. Model Cap. Model Cap. Model Cap. Model Cap. Model Cap. Model Cap. Model Cap. Model Cap.
Hght No.
lbs No.
lbs No. lbs No.
lbs
No.
lbs No. lbs No.
lbs No.
lbs
No.
lbs
No.
lbs
No.
lbs
No.
lbs No.
lbs
No.
lbs No.
lbs No.
lbs
No.
lbs
2" RB203 5340 RB204 4385
2 1/2" RB220 7821 RB221 6952
3" RB237 9397 RB238 8350
3 1/2"
RB254 10032
4"
4 1/2"
5"
5 1/2"
6"
6 1/2"
RB205
RB222
RB239
RB255
3551
6078
7518
9389
RB206 2936
RB223 5024
RB240 6839
RB256 8536
RB270 10016
RB207
RB224
RB241
RB257
RB271
RB284
2466
4221
6265
7824
9181
10806
RB208
RB225
RB242
RB258
RB272
RB285
2101
3596
5630
7222
8475
9975
RB209
RB226
RB243
RB259
RB273
RB286
RB297
1578
3102
4855
6706
7870
9262
10727
RB210
RB227
RB244
RB260
RB274
RB287
RB298
1812
2702
4229
6187
7345
8645
10012
RB211
RB228
RB245
RB261
RB275
RB288
RB299
1388
2374
3716
5438
6886
8105
9386
RB195
RB212
RB229
RB246
RB262
RB276
RB289
RB300
RB308
1229
2103
3293
4817
6476
7628
8834
10100
10400
RB196 1096
RB213 1876
RB230 2937
RB247 4296
RB263 5775
RB277 7204
RB290 8344
RB301 9540
RB309 10338
RB197
RB214
RB231
RB248
RB264
RB278
RB291
RB302
RB310
984
1684
2636
3856
5184
6825
7904
9037
9794
RB198
888
RB215 1520
RB232 2379
RB249 3481
RB265 4670
RB279 6207
RB292 7509
RB303 8585
RB311 9304
RB316 10200
RB199
RB216
RB233
RB250
RB266
RB280
RB293
RB304
RB312
RB317
805
1378
2158
3157
4243
5630
7152
8176
8861
10372
RB200
RB217
RB234
RB251
RB267
RB281
RB294
RB305
RB313
RB318
733
1255
1966
2876
3866
5130
6312
7805
8458
9901
RB201
RB218
RB235
RB252
RB268
RB282
RB295
RB306
RB314
RB319
671
1149
1799
2632
3538
4694
6050
7466
8091
9470
RB202
RB219
RB236
RB253
RB269
RB283
RB296
RB307
RB315
RB320
616
1055
1650
2417
3249
4310
5557
6998
7754
9076
RECESSED TYPE STRINGERS 7/8" CAP. LBS. PER PAIR
Lgth
Hght
2 1/2"
3"
3 1/2"
4"
4 1/2"
5"
5 1/2"
6"
6 1/2"
96"
102"
108"
114"
120"
126"
132"
138"
144"
48"
54"
60"
66"
72"
78"
84"
90"
Model Cap. Model Cap. Model Cap. Model Cap. Model Cap. Model Cap. Model Cap. Model Cap. Model Cap. Model Cap. Model Cap. Model Cap. Model Cap. Model Cap. Model Cap. Model Cap. Model Cap.
No.
lbs No.
lbs No.
lbs No. lbs No. lbs No.
lbs No. lbs No. lbs No.
lbs
No.
lbs No.
lbs
No.
lbs
No.
lbs No.
lbs No. lbs No.
lbs No. lbs
RB379
RB413
7143 RB381
9115 RB415
RB447
6349
8102
10334
RB383
RB417
RB449
RB479
5714
7292
9310
10886
RB385
RB419
RB451
RB481
4800
6629
8463
9897
RB387 4041
RB421 6077
RB453 7758
RB483 9272
RB509 10718
RB389
RB423
RB455
RB485
RB511
3443
5364
7161
8374
9894
RB391 2970
RB425 4625
RB457 6650
RB487 7776
RB513 9187
RB535 10325
RB393
RB427
RB459
RB489
RB515
RB537
2586
4030
6068
7258
8575
9637
RB395
RB429
RB461
RB491
RB517
RB539
RB557
2273
3540
5333
6804
8039
9035
10382
RB363
RB397
RB431
RB463
RB493
RB519
RB541
RB559
2014
3137
4725
6337
7565
8503
9772
10416
RB365
RB399
RB433
RB465
RB495
RB521
RB543
RB561
1796
2798
4214
5652
7106
8030
9229
9838
RB367
RB401
RB435
RB467
RB497
RB523
RB545
RB563
1612
2511
3782
5072
6769
7608
8743
9320
RB369
RB403
RB437
RB469
RB499
RB525
RB547
RB565
RB575
1455
2266
3414
4578
6140
7277
8306
8853
10593
RB371
RB405
RB439
RB471
RB501
RB527
RB549
RB567
RB577
1320
2055
3096
4153
5569
6884
7910
8432
10088
RB373
RB407
RB441
RB473
RB503
RB529
RB551
RB569
RB579
1206
1873
2821
3783
5074
6355
7500
8049
9630
RB375
RB409
RB443
RB475
RB505
RB531
RB553
RB571
RB581
1100
1719
2582
3462
4642
5819
7222
7699
9210
RB377
RB411
RB445
RB477
RB507
RB533
RB555
RB573
RB583
1010
1574
2371
3179
4264
5343
6786
7378
8827
RECESSED TYPE STRINGERS 1 5/8" CAP. LBS. PER PAIR
Lgth
Hght
48"
Model Cap.
No.
lbs
2 1/2" RB380
3"
RB414
3 1/2"
4"
4 1/2"
5"
5 1/2"
6"
6 1/2"
54"
Model Cap.
No.
lbs
7143 RB382
9115 RB416
RB448
60"
66"
72"
Model Cap. Model Cap. Model Cap.
No.
lbs No. lbs
No.
lbs
6349 RB384
8102 RB418
10334 RB450
RB480
5714
7292
9310
10886
RB386
RB420
RB452
RB482
4800
6629
8463
9897
RB388
RB422
RB454
RB484
RB510
4041
6077
7758
9272
10718
78"
Model Cap.
No.
lbs
RB390
RB424
RB456
RB486
RB512
3443
5364
7161
8374
9894
96"
102"
108"
114"
120"
126"
132"
138"
144"
84"
90"
Model Cap. Model Cap. Model Cap. Model Cap. Model Cap. Model Cap. Model Cap. Model Cap. Model Cap. Model Cap. Model Cap.
No.
lbs No. lbs No.
lbs No.
lbs No.
lbs No.
lbs No. lbs No.
lbs
No.
lbs
No.
lbs No. lbs
RB392
RB426
RB458
RB488
RB514
RB536
2970
4625
6650
7776
9187
10325
RB394
RB428
RB460
RB490
RB516
RB538
ACCESSORIES FOR
PALLET RACKING
Skid
Channel
Row
Connector
Drum
Cradle
B40
Flush Safety
Bar
Upright
Reinforcer
2586
4030
6068
7258
8575
9637
RB396 2273
RB430 3540
RB462 5333
RB492 6804
RB518 8039
RB540 9035
RB558 10382
RB364
RB398
RB432
RB464
RB494
RB520
RB542
RB560
2014
3137
4725
6337
7565
8503
9772
10416
RB366
RB400
RB434
RB466
RB496
RB522
RB544
RB562
1796
2798
4214
5652
7106
8030
9229
9838
RB368
RB402
RB436
RB468
RB498
RB524
RB546
RB564
1612
2511
3782
5072
6769
7608
8743
9320
RB370
RB404
RB438
RB470
RB500
RB526
RB548
RB566
RB576
1455
2266
3414
4578
6140
7277
8306
8853
10593
RB372 1320
RB406 2055
RB440 3096
RB472 4153
RB502 5569
RB528 6884
RB550 7910
RB568 8432
RB578 10088
WIRE DECKING FOR
PALLETS RACKS
Insert Shelf
Panel
Reel
Adaptor
Fork Entry
Bar
Wall
Connector
• Easy to install
• Step/Waterfall style: the deck grip wraps
the beam top while the channels
sit on the beam carrying the load
• Painted grey
Model No.
RH739
RH740
18448E
Overall Dim. W" x D"
Weight Cap. lbs.
42 x 46
42 x 52
2500
2500
RB374
RB408
RB442
RB474
RB504
RB530
RB552
RB570
RB580
1206
1873
2821
3783
5074
6355
7500
8049
9630
RB376
RB410
RB444
RB476
RB506
RB532
RB554
RB572
RB582
1100
1719
2582
3462
4642
5819
7222
7699
9210
RB378
RB412
RB446
RB478
RB508
RB534
RB556
RB574
RB584
1010
1574
2371
3179
4264
5343
6786
7378
8827
1257_40_47_eng
2/21/07
10:09 AM
Page B41
STORAGE RACKS
BAR STORAGE RACKS
MINITREETM CANTILEVER RACK
All steel vertical and horizontal racks are ideal for storing bars, tube, pipe and
angle. Economical knocked-down design reduces storage and shipping costs.
• Light-duty adjustable arm cantilever rack
• Efficient storage of plastics, conduit,
extrusions, hydraulic tubing, etc.
• Capacity/arm: 250 lbs.
• Overall dimensions: 36" W x 18 1/4" D x 76 1/4" H
(single); 36" W x 30" D x 76 1/4" H (double)
• Shipped knocked down
COMBINATION VERTICAL RACK
• Stores bars up to 12' long and features
3 shelves for extra storage of small parts
• 8" deep arms divided into 3 sections
• Base size: 36" x 24"
• Height: 84"
• Capacity: 3000 lbs.
• Kleton blue finish
• Wt.: 128 lbs.
Model No. RB959
RB959
Model
No.
RG621
RG622
HORIZONTAL BAR RACK
Capacity
Description
lbs/Column
Single-Sided, 14 Single Arms
1750
Double-Sided, 14 Double Arms
3500
QUIK-TREE®
CANTILEVER RACK
• Stores bars up to 10' long
• 9" deep arms with 9 storage
levels at 6" intervals
• Capacity: 1800 lbs.
• Base: 30" sq.
• Height: 84"
• Kleton Blue finish
• Wt.: 68 lbs.
Model No. RB958
RB958
• Ideal for storage of steel, iron, aluminum,
wood or plastic pipe
• Seven 14" arms per column side
and adjustable on 1 1/2" centres
• Capacity/arm: 500 lbs.
• Overall dimensions: 36" W or 72" W x 21" D x 84" H
(single); 36" W or 72" W x 34" D x 84" H (double)
• Shipped knocked down
MOBILE PIPE AND BAR RACK
• Safely stores up to 1000 lbs. of material
• Folds to compact size of 61" x 34" x 15 1/2"
• Features 4 rack levels with curved edges
to prevent pipe from rolling off
• Constructed of structural square tubing
• 2 swivel and 2 rigid, 6" hard rubber casters
• O.A. Dim.: 58 1/2" W x 34" D x 58" H
• Kleton blue finish
• Wt.: 100 lbs.
Model No. RB951
Brace
Set
Description
L'
Single-Sided, 14 Arms
3
Double-Sided, 28 Arms
3
Single-Sided, 14 Arms
6
Double-Sided, 28 Arms
6
Cap. lbs/
Column
3500
7000
3500
7000
Model No.
Starter
RG631
RG633
RB177
RB173
AIRECTOR®
Description
Wood Deck Base
Wood Deck Base
Wood Deck Base
Wood Deck Base
Posts (set of 4)
Posts (set of 4)
Posts (set of 4)
Dimensions
W" x L"
42 x 48
42 x 60
48 x 48
48 x 60
36" H
42" H
48" H
Wt.
lbs.
237
345
255
363
Model No.
Add-on
RG632
RG634
RB176
RB172
Wt.
lbs.
135
189
153
207
4000-lb
capacity Tubing
2.17" square
• Constructed of a welded base unit that includes a steel
reinforced wood deck and a set of 4 welded tubular steel posts
• Features a 4000-lb stacking capacity and
can be stacked up to 4 units high
• Includes 1" x 6" sturdy deckboards
• Utilizes warehouse airspace and can be easily relocated
• Base frame has six centre supports for 4-way entry by lift trucks
• Posts and bases sold separately
Model
No.
RB954
RB955
RB956
RB957
RB966
RB967
RB968
Wt.
lbs.
165
215
1" x 6" sturdy
deckboards.
Finished on
all 4 sides.
Socket 2 1/2"
Square
Wt.
lbs.
96
114
111
127
46
52
58
21
/2"
Underclearance
4 1/2”
Bottom base frame
4-way entry
STACKING U-RACKS
•
•
•
•
Lightweight, inexpensive and easy to use
Stacks up to four units high
All welded construction
Inside dimensions:
16 1/2" W (bottom) x 25 1/4" W (top) x 15 3/4" H
• Units are packaged and sold individually
Model
No.
RB969
RB970
Capacity
lbs/pr.
6000
10000
Wt.
lbs.
25
30
PORTABLE STACKING RACKS
• A highly flexible storage system that is expandable in length, width and height
• Sturdy, yet lightweight, easy for one person to assemble
• All welded steel construction requires no tools or fittings
Model
No.
RB952
RB953
RB964
RB965
Overall Dimensions
W" x L" x
H"
12 x 16 x 13 1/2
14 x 19 x
17
15 x 22 x 20 1/2
16 x 26 x 23 1/2
Cap
lbs.
2500
3700
5600
7500
Wt.
lbs.
18
25.5
31
44
13461E
B41
1257_40_47_eng
2/21/07
10:09 AM
Page B42
PARTITIONS & ENCLOSURES
WIRE MESH PARTITIONS & ENCLOSURES
Rugged KLETON wire mesh partitions and enclosures provide maximum security at low
cost for tools, valuable inventory, hazardous materials, and any area of your plant where
restricted access is required. Bolt-down posts and reinforced panels provide the strength that
your application demands. Standard STOCK SIZES include all basic bolt-together hardware
required for fast and easy installation of modular wall and roof panels, and a standard 4' x 8'
or 8' x 8' sliding door which may be located on any side, opening left-to-right or right-to-left.
This system provides the versatility needed to expand or modify your enclosure quickly and at
minimum cost. Order an enclosure with a roof for maximum security. CUSTOM SIZES can be
designed to suit your special application regardless of the size required. Colour: Kleton blue.
STOCK
SIZES
Type A
2 Sides
Type B
3 Sides
Type C
4 Sides
Overall Std. Sliding
Unit
Wall Size Door Size
Height D x W
WxH
8'3" 8'4" x 12'8" 4' x 8'
8'3" 12'6" x 16'8" 4' x 8'
8'3" 16'6" x 24'8" 8' x 8'
12'3" 8'4" x 12'8" 4' x 8'
12'3" 12'6" x 16'8" 4' x 8'
12'3" 16'6" x 24'8" 8' x 8'
8'3" 8'4" x 12'8" 4' x 8'
8'3" 12'6" x 16'8" 4' x 8'
8'3" 16'6" x 24'8" 8' x 8'
12'3" 8'4" x 12'8" 4' x 8'
12'3" 12'6" x 16'8" 4' x 8'
12'3" 16'6" x 24'8" 8' x 8'
8'3" 8'4" x 12'8" 4' x 8'
8'3" 12'6" x 16'8" 4' x 8'
8'3" 16'6" x 24'8" 8' x 8'
12'3" 8'4" x 12'8" 4' x 8'
12'3" 12'6" x 16'8" 4' x 8'
12'3" 16'6" x 24'8" 8' x 8'
WITHOUT ROOF
Wt.
Model No. lbs.
KD069
417
KD057
535
KD061
682
KD067
583
KD055
758
KD059
977
KD085
511
KD073
690
KD077
878
KD083
730
KD071
997
KD075
1273
KD101
688
KD089
912
KD093
1190
KD099
996
KD087
1330
KD091
1740
WITH ROOF
Wt.
Model No.
lbs.
KD070
670
KD058
1009
KD062
1485
KD068
836
KD056
1232
KD060
1780
KD086
758
KD074
1158
KD078
1677
KD084
977
KD072
1465
KD076
2072
KD102
923
KD090
1368
KD094
1975
KD100
1231
KD088
1786
KD092
2525
Note: Other sizes available
WIRE MESH PARTITION COMPONENTS
Everything necessary to create your own
custom enclosure.
Please follow these guidelines for determining
the components that are required:
Panels - Whenever possible, stacking panels
hori-zontally (one on top of the other) is more
economical than placing them vertically (beside
each other) - this is because fewer posts are
required for wall support when panels are
stacked.
Examples:
• For an 8' high partition, stack 2 Model KD037
(4' X 8') panels horizontally
• For a 10' high partition, stack 2 Model KD037
(4' x 8') and 1 Model KD033 (2' x 8') panel
horizontally
• For a 12' high partition, stack 3 Model KD037
(4' x 8') panels horizontally
Posts - A post must be placed at each end of
every panel (or of every stack of panels). Use Line
posts bet-ween in-line panels for support, use
corner posts when a 90° corner or a "T" joint is
required. (Be sure to calculate an extra 2" of
overall wall length for each post added). When a
post meets an existing wall, add 1 KD115 wall
bracket for proper support (fasteners are included
with KD115 to mount to post, not to wall).
Swing Doors - All are 7' in height and include a
1' transom for a total of 8' in height. They may
swing outwards to the left or to the right (except
the KD112 swing door with wicket which swings
open to the left only). Fasteners are included.
spots on the ends of wire mesh partitions to
plug up potential security risks. Slides easily
over the ends of the existing wire mesh
sections. Bolt holes on the filler panels are
separated per every inch and allow the filler
panel to fill in a space 6" and 10" wide. The holes
line up with holes on the existing panel which
are drilled in at the top and bottom to securely
fasten the filler panel in two places.
ADJUSTABLE
FILLER PANELS
WIRE MESH FRAME
HARDWARE
Model
No.
KD030
KD031
KD032
KD033
KD034
KD035
KD036
KD037
Frame
Size'
2x2
2x3
2x4
2x8
3x8
4x3
4x4
4x8
Wt.
lbs.
10
11
12
31
40
20
23
45
Height
8'3"
10'3"
12'3"
Wt.
lbs.
22
27
32
POSTS
Roof Installations - Please contact us or fax us
your floor plan.
Model
No.
KD106
KD108
KD107
KD110
KD111
KD112
8'3"
10'3"
12'3"
Description
4' x 8' Sliding Door
8' x 8' Sliding Door
8' x 10' Sliding Door
3' x 7' Swing Door
4' x 7' Swing Door
4' x 7' Swing Door
c/w Wicket
Adjustable filler panels – Used to fill in the blank
B42
Model
No.
Description
KD029
8' Door Track
KD028
Sliding Door Hardware Kit
KD115
Wall Bracket Kit
GD121B* 5/16" x 1" Carriage Bolt
GD128B* 5/16" x 3" Carriage Bolt
GD578B
Nut 5/16" Hex.
KD001
3/8" Anchor Bolt
Wt.
lbs.
16
6
1
.01
.01
.01
.01
*1 x GD578B is required for each GD121B and GD128B
15217E
For Each Panel Add:
• 4 x GD121B for each 8' long panel
• 2 x GD121B for each panel under 8' long
• 1 x GD578B for each GD121B required
22
27
32
For Each Sliding Door Add:
• 1 x KD028 for each sliding door
(regardless of size)
• 1 x KD029 Door Track for each
KD106 4' wide sliding door
• Add 2 x KD029 Door Track for each
KD108 or KD107 8' wide sliding door
Wt.
lbs.
85
122
148
65
74
85
For Each Post Add:
KD052 add
4
x
KD053 add
8
x
KD045 add
6
x
KD046 add 12 x
KD048 add
6
x
KD050 add 12 x
CORNER POSTS
DOORS
Sliding Doors - All sliding doors may slide open to
the left or to the right. In order to properly mount
a sliding door, a post must be located on the side
onto which the door slides, at the same distance
away from the opening as the doors' width.
Wt.
lbs.
10
5
Description
1' x 8' Filler panel
1' x 4' Filler panel
FASTENERS HARDWARE REQUIRED
Model
No.
KD052
KD045
KD048
KD053
KD046
KD050
Model
No.
KD118
KD119
GD128B,
GD128B,
GD128B,
GD128B,
GD128B,
GD128B,
2
2
2
2
2
2
x
x
x
x
x
x
KD001
KD001
KD001
KD001
KD001
KD001
1257_40_47_eng
2/21/07
10:10 AM
Page B43
SAFETY GUARDS & BOLLARDS
PERIMETER GUARDS
•
•
•
•
Create your own barrier guards with 2 styles to choose from: 2" x 2" welded wire mesh or 2" square tube
Both feature a unique 49 1/2" overall height, and are easily installed
Posts are constructed of 2" square tube with 5/16" base plate with holes for anchoring to floor
Colour: Safety yellow
TUBULAR STYLE
MESH STYLE
HARDWARE REQUIRED
Model No.
Model
No.
Description
Dimensions
W
x
H
Wt.
lbs.
Post
Mesh Panel
Mesh Panel
4’
8’
49 1/2" H
x
4’
x
4’
13
20
39
KD001
GD128B
GD578B
KD116
MESH STYLE
KD129
KD130
KD131
Floor Anchors (2 per post)
5/16" x 3" Carriage Bolt (4 per frame)
5/16" Hex Nut (1 nut for each GD128B)
Post Caps (1 per post)
FOR TUBULAR STYLE
KD001
KD116
TUBULAR STYLE
KD132
Starter Section
4’
x 49 1/2"
KD133
Add-On Section
4’
x 49 1/2"
KD134
Starter Section
8’
x 49 1/2"
KD135
Add-On Section
8’
x 491/2"
Note: Hardware to attach add-on sections is included.
Description
FOR MESH STYLE
Floor Anchors (4 per starter section / 2 per add-on section)
Post Caps (1 per post)
45
32
66
53
UPRIGHT PROTECTOR
• Protects industrial racking from those damaging impacts that can cause unsafe conditions
• Made from 1/4" thick steel with a 90° bend
• 18 1/4" overall height; 4 3/4" inside depth; 7"
overall depth and 5" sides
• Weight: 12 lbs.
• Highly visible safety yellow
• 4 pre-drilled holes made for 1/2" anchors
(not included)
Model No. RB925
SAFETY GUARDS
• Protect your equipment and personnel from accidental
damage and injury with these low profile safety guards
• 4"x 4" square tube welded to an 8" x 8" x 1/2" base, complete
with four 1" diameter holes for anchoring to floor
• Colour: Safety yellow
HEAVY DUTY
STEEL BOLLARDS
Model
No.
KD127
KD128
KD136
KD139
Dimensions
L"
x
H"
24
x
18
48
x
18
24
x
42
48
x
42
• Protect your warehouse equipment,
as well as high traffic areas with these
heavy-duty steel bollards
• 4" x 4" square tube welded to an 8" x 8" x
1/2" steel base, complete with four 1"
diameter holes for anchoring to floor
• Colour: Safety yellow
Wt.
lbs.
65
85
95
115
Model No.
KD125
KD126
15219E
Height"
24
48
Wt. lbs.
30
50
B43
1257_40_47_eng
2/21/07
10:10 AM
Page B44
CURTAIN PARTITIONS
Curtain partitions screen, isolate, enclose and protect any area of any size.
Commonly used in welding and paint shops, but can be used anywhere. Brackets
designed for wall or ceiling mount but can be self supported by floor stands. Large
selection of drape material can be utilized with any curtain.
DESIGN YOUR OWN CURTAIN
CURTAINS - Take exact length of area of enclosure and add 10% fullness for proper draping. Then multiply length & height to obtain square footage. Curtains
hemmed on top and two sides 2" pocket on bottom side. Brass grommets spaced
every 12". Refer to model number for square footage cost of fabric required.
12 '
TRACK - Straight and curved, straight track available in 5' and 10' lengths. Curved
corners are 3' long with 2' radius welded splicer on each end included. When using
a curved track, length is increased by 2'. e.g. 8' straight track with a curve at each
end overall = 12'.
8'
straight
track reg.
CARRIERS - Since curtains are made to any length be sure to add one additional
carrier to actual length of curtain ordered. For example every 10' of curtain is
fabricated with 11 grommets on top side. Therefore 11 carriers are required. A
double carrier should be used at the beginning of each curtain. Steel roller carriers
are permanently lubricated enclosed bearings.
CLAMPS - Available for flush ceiling/beam mounting and floor mounting.
Clamps can also be used as track splicers. All fasten with supplied Allen bolts.
Order sufficient clamps to support track every 5'. Standards - When free standing
uprights are required, be sure to specify clamps for fastening track to angle
brackets on uprights. Standards are required every 8'. Other custom heights on
application.
NOTE: All standards should be lagged to floor with 5" lags and shields or welded
as required (lags not included).
TRACK
Description
KB017
5', 16 ga. Track
KB016
10', 16 ga. Track
KB029
Track Splicer
KB012
End Stop
ROLLERS
KB018
KB019
KB014
Description
10 oz/sq.yd. Cotton Duck, Flame Resistant
15 oz/sq.yd. Cotton Duck, Flame Resistant
14 mil Yellow PVC, Flame Resistant
14 mil Green PVC, Flame Resistant
20 mil Clear PVC, Flame Resistant
FLOOR MOUNTS
Model No.
KB013
Model No.
KB039
KB040
KB004
KB003
KB038
KB009
90° Curve Track
KB025
Track Splicer
KB027
90° Corner Connector
KB024
3-Way "T" Connector
KB032
8' Square Post
KB005
12" x 12" Base
Single Nylon Roller
25 lbs., Cap. 2 1/2" Hook
BEAM MOUNT / SUSPENSION
Single Steel Roller
75 lbs., Cap. 2 1/2" Hook
KB008
90° Curve Track
Double Steel Roller
125 lbs., Cap. 2 1/2" Hook
KB031
Ceiling Clamp
KB028
90° Corner Connector
KB023
3-Way "T" Connector
Overlap By-Pass Roller
12" Long x 2 3/4" High
WALL MOUNTS
CEILING MOUNT
KB020
KB021
Wall Connector Bracket, Down
90° Curve Track
KB030
Clamp, Flush Mount
KB026
90° Corner Connector
KB022
3-Way "T" connector
Wall Connector Bracket, Up
KB011
End Connector Fastener, Up
KB010
End Connector Fastener, Down
B44
KB007
10998E
1257_40_47_eng
2/21/07
10:10 AM
Page B45
STRIP CURTAIN DOORS
Everything you need in one package to install your own
strip curtain door and save money!
ORDERING INFORMATION
Every strip curtain door comes complete with PVC strips and
universal hardware for mounting strip curtain. Simple to follow
installation instructions are included in every package.
1. Determine inside width and height of door opening.
NOTE: If mounting on door above lintel, measure
from floor to mounting height.
2. Select type of PVC material required:
STANDARD or LOW TEMP.
Standard recommended for temperatures from 17°C to 66°C.
Low Temp. recommended for interior use only for
temperatures from -40°C to 37°C.
3. Select from the standard sizes listed in the chart below.
NOTE: If required size is not available, order the next largest
size. Installation instructions describe how simple trimming
can custom fit almost any door opening.
4. Special size doors and hanging applications
are available upon request.
5. For overhead doors, please call one of our
sales representatives for assistance.
INTERIOR DOORS
Save energy costs
• The optimal solution to
open door heat/cooling
loss
Reduce noise pollution
• Provides the ideal
accoustical
barrier around
noisy equipment
Every strip curtain door comes complete with
PVC strips and universal hardware for door or
wall mounting. Simple to follow installation
instructions included in every package.
CONVEYORS
Provide extra
safe passage
• People can see and
be seen so there's
less chance
of accidents
Control smoke, dust
and sprays
• Strip curtains can
control in-plant
contaminants to
improve employee
environment
DOCKS
Low maintenance
• Clear flexible vinyl
resists stretching and
stands up to abrasion
• All aluminum hardware
is used for maximum
durability
• May be quickly and
easily cleaned with
detergents or cleansing
agents that are free
from abrasives
• Deep stains and
ingrained dirt etc. can
be removed by carefully
applying ethanol
EASY TO ORDER
It's easy to order the strip curtain that fits
your door exactly because seven standard sizes
can be made to fit 95% of most door openings.
Special sizes are available.
STANDARD DOOR SIZES
Strip
Size
8"
(8" x .080)
Door Opening
Wt.
W' x H'
lbs.
4 x 7
25
5 x 8
35
6 x 8
40
12"
8 x 8
80
(12" x .120)
8 x 10
100
10 x 10
125
12 x 12
175
NOTE: Doors with 8" strips have 2" standard overlap.
Doors with 12" strips have 4" standard overlap.
Model No.
Standard
KF022
KF023
KF024
KF026
KF025
KF020
KF021
Model No.
Low Temp.
KF004
KF005
KF006
KF008
KF007
KF002
KF003
Model No.
Standard
KF032
KF029
Model No.
Low Temp.
KF013
KF011
Model No.
Standard
KF033
KF030
Model No.
Low Temp.
KF014
KF012
REPLACEMENT STRIPS - 5 PER CARTON
Strip
Size
8" x .080 x 8'
12" x .120 x 12'
Wt.
lbs.
15
45
BULK ROLLS
Strip
Size
8" x .080
2" x .120
Roll'
300
200
13463E
Wt.
lbs.
99
150
B45
1257_40_47_eng
2/21/07
10:10 AM
Page B46
SECURITY GATES & PROTECTORS
GALVANIZED FOLDING
SECURITY GATES
• Secure outside access during the day
and add security at night with heavy-duty,
15-gauge steel folding gates
• Constructed of galvanized steel U channels
riveted using aircraft quality rivets for durability
• Center drop pin rests in your pre-drilled
holes to secure gate when extended
• Locks can be located on right
or left side of single gates
• Durable 3" rubber casters that
fully retract when not in use
• Installation hardware included
SINGLE FOLDING GATES
Lock Location
Left
Right
Model No. Model No.
KA035
KA036
KA037
KA038
KA039
KA040
KA041
KA042
KA043
KA044
KA045
KA046
KA047
KA048
KA049
KA050
KA051
KA052
KA053
KA054
KA055
KA056
KA057
KA058
KA059
KA060
KA061
KA062
KA063
KA064
KA065
KA066
KA067
KA068
KA069
KA070
KA071
KA072
KA073
KA074
KA075
KA076
KA077
KA078
KA079
KA080
KA081
KA082
KA083
KA084
KA085
KA086
KA087
KA088
KA089
KA090
KA031
KA032
KA033
KA034
Usable Width'
3 to 4
3 to 4
3 to 4
3 to 4
3 to 4
4 to 5
4 to 5
4 to 5
4 to 5
4 to 5
5 to 6
5 to 6
5 to 6
5 to 6
5 to 6
6 to 7
6 to 7
6 to 7
6 to 7
6 to 7
7 to 8
7 to 8
7 to 8
7 to 8
7 to 8
8 to 9
8 to 9
8 to 9
9 to 10
9 to 10
DOUBLE FOLDING GATES
Height
Collapsed'
6.5
7
7.5
8
8.5
6.5
7
7.5
8
8.5
6.5
7
7.5
8
8.5
6.5
7
7.5
8
8.5
6.5
7
7.5
8
8.5
6.5
7
7.5
8
8.5
Height
Expanded'
6
6.5
7
7.5
8
6
6.5
7
7.5
8
6
6.5
7
7.5
8
6
6.5
7
7.5
8
6
6.5
7
7.5
8
6
6.5
7
7.5
8
Model
No.
KA026
KA027
KA028
KA029
KA030
KA001
KA002
KA003
KA004
KA005
KA006
KA007
KA008
KA009
KA010
KA011
KA012
KA013
KA014
KA015
KA016
KA017
KA018
KA019
KA020
KA021
KA022
KA023
KA024
KA025
Weight
lbs.
69
73
77
80
84
73
74
78
80
82
76
79
81
84
86
82
85
87
90
92
88
92
96
99
104
102
104
106
109
112
Usable Width'
6 to 8
6 to 8
6 to 8
6 to 8
6 to 8
8 to 10
8 to 10
8 to 10
8 to 10
8 to 10
10 to 12
10 to 12
10 to 12
10 to 12
10 to 12
12 to 14
12 to 14
12 to 14
12 to 14
12 to 14
14 to 16
14 to 16
14 to 16
14 to 16
14 to 16
16 to 18
16 to 18
16 to 18
18 to 20
18 to 20
Height
Collapsed'
6.5
7
7.5
8
8.5
6.5
7
7.5
8
8.5
6.5
7
7.5
8
8.5
6.5
7
7.5
8
8.5
6.5
7
7.5
8
8.5
6.5
7
7.5
8
8.5
PORTABLE EXPANDING GATES
• Great for many applications: Blocking equipment, personnel and entrances
• Gates expand and lock to close off any opening
• When not in use, simply fold up,
Model
Collapsed
Expanded
Weight
roll away and store
No.
Width"
Height"
Width" Height" lbs.
• Purchase optional add-on section
KA091
78
79.5
144
73.5
144
to create larger barriers
KA126
Add-On Section 6' Long When Expanded 72
COLUMN PROTECTORS
KH779
6" Square
Protect your building's columns from damaging bumps by moving vehicles.
STRUCTURAL COLUMN PROTECTORS
•
•
•
•
•
Octagon configuration for more rebounding ability
100% rust proof
Flexible deflection design - capable of handling a hit from a 7000-lb forklift at 6 mph
Easy to assemble
Nylon fasteners (included) for breakaway ability
KH780
8" Square
KH783
9" Round
EXTREMELY VERSATILE
• Fits over 80% of standard columns
• Protect columns under virtually any condition and temperature down to 0˚F
Model
No.
KH779
KH780
KH781
KH782
KH783
KH784
KH785
Size"
6 Sq.
8 Sq.
10 Sq.
12 Sq.
9 Round
14 Sq.
16 Sq.
B46
Fits Square
Column"
Up to 6
6 to 8
8 to 10
10 to 12
Up to 6
12 to 14
14 to 16
Fits H
Column"
Up to 6 x 6
6+ to 8 x 8
8+ to 10 x 10
10+ to 12 x 12
Up to 6 x 6
12+ to 14 x 14
14+ to 16 x 16
Fits Round
Overall
Column"
Dia." Height"
Up to 6 Dia.
26
42
6 to 8 Dia.
26
42
8 to 10 Dia.
26
42
10 to 12 Dia.
26
42
Up to 8 5/8 Dia. 26
42
12 to 14 Dia.
28.5
42.75
14 to 16 Dia.
28.5
42.75
Wt.
lbs.
46
46
46
46
46
70
70
KH781
10" Square
KH784
14" Square
19009E
KH782
12" Square
KH785
16" Square
Height
Expanded'
6
6.5
7
7.5
8
6
6.5
7
7.5
8
6
6.5
7
7.5
8
6
6.5
7
7.5
8
6
6.5
7
7.5
8
6
6.5
7
7.5
8
Weight
lbs.
120
124
129
134
139
144
148
153
158
162
168
172
177
182
187
180
184
189
196
199
192
196
199
201
206
204
208
211
216
230
1257_40_47_eng
2/22/07
7:56 AM
Page B47
PIPE FITTINGS
There are many variations of fittings to suit a wide range of applications, providing the versatility
to achieve any structural configuration. Kee Klamp® fittings are galvanized malleable iron castings
designed to suit eight sizes of tube.
A standard hex key and tube cutters are the only tools required to create strong, rigid structures.
Recessed set screws, tightened by the hex key, firmly lock the tube into the fitting. The setscrew is
manufactured in casehardened steel and is coated to protect against corrosion.
Note: pipe fittings,
not to be used for
tubing
KEE KLAMP®
• Simple method
of constructing
tubular
structures
• Cost effective
alternative to
welding
• Galvanized to
resist corrosion
Pipe
Sizes"
3/4
1
1 1/4
1 1/2
2
SHORT TEE
RK597
RK598
RK599
RK600
RK601
LONG TEE
RK602
RK603
RK604
RK605
RK606
SIDE OUTLET
TEE
RK607
RK608
RK609
RK610
RK611
TWO
SOCKET CROSS
RK612
RK613
RK614
RK615
RK616
3/4
1
1 1/4
1 1/2
2
90° ELBOW
RK617
RK618
RK619
RK620
RK621
3 WAY 90°
ELBOW
RK628
RK629
RK630
RK631
N/A
BASE FLANGE
RK638
RK639
RK640
RK641
RK642
RAILING
BASE FLANGE
RK643
RK644
RK645
RK646
RK647
HANDRAIL
BRACKET
RK663
RK664
RK665
RK666
N/A
SIDE PALM
FIXING
N/A
RK671
RK672
RK673
N/A
3/4
1
1 1/4
1 1/2
2
PLASTIC END
PLUGS
RA179
RA180
RA181
RA182
RA183
3/4
1
1 1/4
1 1/2
2
SHORT
SWIVEL TEE
RK677
RK678
RK679
RK680
N/A
(sold in pairs only)
CLAMP ON TEE
RK651
RK652
RK653
RK654
N/A
INTERNAL
JOINT
N/A
RK686
RK687
RK688
N/A
SLEEVE JOINT
RK681
RK682
RK683
RK684
RK685
90° CROSSOVER
RK697
RK698
RK699
RK700
RK701
PIPE
Build an unlimited array of strong rigid structures combining
standard black iron (unthreaded) pipe or galvanized (threaded on one side) pipe (schedule 40) , with any combination of
corresponding sized Kee Klamps® fittings. Pipe sizes are
available from 3/4" to 2" (inside diameter). Standard pipe length
is 21 ft., with cut lengths available upon request. A cutting
charge will be added per cut length of piping.
INSIDE
DIA.
OUTSIDE
DIA.
A
3/4 "
1.05 "
B
1"
1.315 "
C
1 1/4 "
1.66 "
D
1 1/2 "
1.90 "
E
2"
2.375 "
Pipe
Diameter"
3/4
1
1 1/4
1 1/2
2
Fitting
Size
A
B
C
D
E
Pipe
Length'
21
21
21
21
21
Black Iron
Model No.
RA109
RA111
RA113
RA115
RA117
Galvanized Iron
Model No.
RA110
RA112
RA114
RA116
RA118
Note: Drawings not to scale.
19713E
B47
1257_48_52_eng
2/21/07
10:16 AM
Page B48
STORAGE CABINETS
WELDED STORAGE CABINETS
• Suitable for office, plant, school or institutional storage needs
• Fully adjustable shelves, recessed handle, cylinder lock, and coat rods
(wardrobe and combination types)
• Choose from Hi-Boy, Lo-Boy, wardrobe, and combination cabinets
• Lo-Boy comes with 2 shelves
• Capacity: 150 lbs. evenly distributed
FB039
Hi-Boy Type
FB038
Lo-Boy Type
Description
Hi-Boy
Wardrobe
Combination
Lo-Boy
Add'l shelf
Grey
FB039
FB040
FB041
FB038
FB037
Model No.
Beige
FB034
FB035
FB036
FB033
FB032
Black
FB029
FB030
FB031
FB028
FB027
FB030
Wardrobe Type
H"
72
72
72
40
1
Dimensions
x W" x
x 36 x
x 36 x
x 36 x
x 36 x
x 36 x
D"
18
18
18
18
16
Wt.
lbs.
140
121
144
90
6.5
FB036
Combination Type
HEAVY-DUTY
RUBBERMAID® PLASTIC CABINETS
•
•
•
•
•
Durable resin construction is easy to clean, will not rust or crack
Functional and modular organization
Doors are lockable (locks not included)
Quick assembly without tools
Ventilated shelves hold 180 lbs. each
MH722
MH724
Model
No.
MH722
MH724
B48
Dimensions
W" x D" x H"
36 x 18 x 72.3
36 x 18 x 37.3
No. of
Shelves
3
1
Wt.
lbs.
55
28
21002E
1257_48_52_eng
2/21/07
10:16 AM
Page B49
STORAGE CABINETS
COMPACT CABINETS
COUNTER HIGH CABINETS
• Serves as counter and cabinet combo
• Double doors w/three-point door
locking device swing to full 180°
• Quiet operating cabinet
• Two shelves, adjustable every 2"
• Cabinet dimensions:
36" W x 42" H with 18" or 21" D
• Capacity: 180 lbs. per shelf
• Shipped
knocked
down
VISUAL CABINETS
ECONOMICAL COMPACT CABINETS
Model
No.
FF985
FF986
FF987
FF988
Description
High cabinet
High cabinet
Extra shelf (For FF985)
Extra shelf (For FF986)
Depth"
18
21
18
21
Wt.
lbs.
88
96
9
7
• Ideal anywhere a full-sized cabinet is too large
• Includes adjustable shelves
• Locking door
Model
No.
FH482
FH483
Size
W" x D" x H"
21 x 15 x 35
30 x 15 x 66
No.
Shelves
2
4
Wt.
lbs.
33
50
• Keep a close eye on valuable inventory
• Plexiglass door panels resist breakage
and will not shatter
• 22-gauge shelves, adjustable on 2" centres
• 20-gauge steel doors
• 3-point locking mechanism with die-cast
locking handle (includes 2 keys)
• 150-lb capacity per shelf
• Shipped knocked down
Model
No.
MI629
MI630
MI631
W"
30
36
36
x
x
x
x
Size
D" x
12 x
18 x
24 x
H"
26
42
78
No.
Shelves
2
2
4
FULL-SIZED CABINETS
Special padlock hasp
conceals padlocks
from bolt cutters.
DEEP DOOR STORAGE CABINET
JUMBO STORAGE CABINET
• High capacity cabinet securely
stores large, bulky items
• Four adjustable shelves, lock
and handle are included
• Grey or tan enamel finish
• Capacity per shelf: 150 lbs.
• Shipped knocked down
Model No.
Grey
Tan
FB051 FB049
FB054 FB050
Description
Cabinet
Add'l shelf
Dimensions
W" x D" x H"
48 x 24 x 78
48 x 24
Wt.
lbs.
250
20
• Padlock hasp (cannot be accessed by bolt
cutters) helps secure the contents of this deep
door high-density storage cabinet
• 4 reinforced adjustable main shelves are
complemented by 6 adjustable mini shelves
in each 4" deep hinged door for a capacity
unmatched by any other cabinet
• Padlock sold separately
• Capacity per shelf: 175 lbs.
Model
Dimensions
Wt.
No.
Description
W" x D" x H" lbs.
38 x 24 x 72 315
FB024 Cabinet
FB025 Extra shelf for cabinet
38 x 21 1/4
18
FB026 Extra shelf for door
18 x 6
2
SA898 Padlock keyed different
SA899 Padlock keyed alike
HEAVY-DUTY CABINET DOLLIES
•
•
•
•
HEAVY-DUTY
WELDED STORAGE CABINET
• All-welded 20-gauge steel cabinet features four
adjustable 18-gauge shelves, locking handle
• Shelves adjust on 2" centers
• Capacity per shelf:
300 lbs. evenly distributed
Model
No.
FB021
FB022
Description
Cabinet
Add’l shelf
Model
No.
MI632
MI633
MI634
MI635
Makes cabinets fully mobile
Allows for easy access during cleaning
Two rigid and two swivel with brake, 5" poly casters
Capacity: 800 lbs. evenly distributed
19965E
Dimensions
W" x D" x H"
36 x 18 x 72
36 x 18 x 1
Wt.
lbs.
185
8
Dimensions
W" x D"
36 x 18
36 x 24
48 x 18
48 x 24
B49
1257_48_52_eng
2/21/07
10:16 AM
Page B50
HEAVY-DUTY STORAGE PRODUCTS
EXTRA HEAVY-DUTY SHELVING
•
•
•
•
•
•
•
•
Excellent for storage of dies, fixtures, jigs, or any heavy material
Uprights are 13-gauge formed angle 2" x 2", punched on 1" centres for quick and easy shelf adjustment
Shelf capacities based on loads that are evenly distributed
Extra shelves and 96" high units are available
Each unit includes 5 shelves
Shelves are 14-gauge with 2" deep channels on all four sides
Extra channel welded to the bottom of shelf to prevent flexing under heavy loads
Grey baked enamel finish
Model
No.
RC524
RC525
RC526
RC527
RC528
RC529
W"
36
48
60
36
48
60
x
x
x
x
x
x
x
Dimensions
D"
18
18
18
24
24
24
x
x
x
x
x
x
x
Capacity per
Shelf lbs.
1570
1600
1500
1625
1650
1500
H"
72
72
72
72
72
72
CLEARVIEW
CABINETS
VISIBLE STORAGE
WIRE MESH
CABINET
• Clear polycarbonate
windows so all your
tools and supplies
are visible at a glance
• 12-gauge one-piece
body design
• 6" sweep space
• Adjustable 14-gauge shelves
• Three-point locking device
• Hinges are 10-gauge
Model
No.
FG851
FG852
Dimensions
W" x D" x H"
48 x 24 x 60
48 x 24 x 72
• All-welded mesh storage cabinet
provides a secure yet visible area
to place your tools and equipment
• Reinforced K-brace welded to the door
frame delivers additional strength
• Diamond shaped 13-gauge steel mesh
• Adjustable shelves bolt into holes
• Door has three-point latching system with
cam-lock and chrome plated handle
• Dimensions: 24" W x 21" D x 72" H
• Weight: 146 lbs.
Model No. FB015
O. A.
Ht"
66
78
No. of
Shelves
3
4
Shelf
Cap. lbs.
1200
1200
Wt.
lbs.
446
536
GUARDMASTERTM HEAVY-DUTY
STORAGE CABINETS
HEAVY-GAUGE
STORAGE CABINETS
THESE CABINETS ARE SO TOUGH, THEY'RE LIKE
HAVING SAFES ON YOUR SHOP FLOOR FOR STORAGE
• All-welded 14-gauge cabinets
and shelves which can be
adjusted every 3"
• Doors feature secure
3-point locking system
• Optional 7-gauge bolt-on-legs
are available adding 4" to overall
height of cabinet and provide
fork lift access to move cabinet
• Capacity: 1450 lbs/shelf
Model
No.
FB013
FB012
FB011
B50
No. of
Shelves
4
3
2
Wt.
lbs.
167
212
252
197
242
292
• Fully-welded construction offers
exceptional strength and durability
• 16-gauge steel with 18-gauge double
walled doors and heavy 14-gauge floor
• Flush mounted handle
• Shelves are adjustable on 2" centers
• Premium paint is textured
to hide smudges
• Galvanized steel shelves carry an
allowable uniform load of 1000 lbs.
W"
36
36
36
Dimensions
x D" x H"
x 21 x 78
x 21 x 60
x 21 x 42
Wt.
lbs.
370
300
230
Model
No.
FH434
FH435
FH436
FH437
FH438
FH439
21003E
W"
36
36
48
36
48
36
Dimensions
x D" x
x 21 x
x 21 x
x 24 x
x 21 x
x 24 x
x 21 x
H"
42
60
66
72
78
78
No. of
Shelves
2
3
3
4
4
4
Wt
lbs.
185
240
380
300
350
485
1257_48_52_eng
2/21/07
10:16 AM
Page B51
SHOP DESKS & CABINETS
WALL-MOUNTED
SHOP DESK
FLOOR MODEL
FOREMAN'S DESK
CABINET STYLE
SHOP DESK
Ideal for shipping and receiving clerks,
watchmen and shop foremen.
24" W x 28" D x 3 1/2" H locking drawer
that glides quietly on nylon rollers.
Overall dimensions: 34 1/2" W x 30" D x 53" H.
Heavy gauge steel in grey enamel finish.
Some assembly required
Model No. FH487 105 lbs.
This solid unit offers the convenience of the floor
model foreman's desk, with a locking cabinet for
added storage space.
Sloping top is a comfortable 43" high at front.
Large locking drawer and double door cabinet.
Overall dimensions: 34 1/2" W x 30" D x 53" H.
Some assembly required
Grey enamel finish.
Model No. FH488 150 lbs.
A SPACE SAVER
The large 34 1/2" W x 30" D x 19" H desktop
provides a convenient writing area
without utilizing valuable floor space.
24" W x 28" D x 3 1/2" H locking drawer
on quiet nylon rollers. Wall mounting
brackets included. Grey enamel finish.
Model No. FH486 85 lbs.
OPTIONAL CASTER KIT
OPTIONAL CASTER KIT
Model No. FH489
Model No. FH489
DELUXE
SHOP DESK
OPEN STYLE
SERVICE WRITER
CLOSED STYLE
SERVICE WRITER
4 drawers of filing/storage space and an 8-compartment sorter makes this an all-purpose desk for
warehouses, shops and shipping and receiving
departments. Comes with one tray drawer with
cylinder lock, two double-deep file drawers with
recessed handles, and one all purpose drawer. Desk
top sorter keeps papers handy and organized. Use
lower shelf for extra storage space or as a footrest.
Overall dimensions: 39" W x 28 3/4" D x 55 1/2" H.
Grey baked enamel finish.
Shipped knocked down.
Model No. FH459 179 lbs.
This unit provides a locking upper door cabinet with
one shelf for added storage space. Comes with
sloping writing top and large 25 3/8" W x 16 1/2" D
x 3 3/4" H locking drawer with recessed pull that
opens fully on smooth slides. Use lower shelf for
extra storage or as a convenient footrest. Overall
dimensions: 31 1/2" W x 21" D x 72 1/2" H. Tan baked
enamel finish.
Shipped knocked down.
Model No. FH386 127 lbs.
Same features as Model FH386 plus a locking lower
door compartment with one shelf for storage of
large/bulky items. Overall dimensions: 31 1/2" W x
21" D x 72 1/2" H. Shipped knocked down.
Model No. FH385 171 lbs.
21004E
B51
1257_48_52_eng
2/21/07
10:17 AM
Page B52
STEEL LOCKERS
• Rugged, all-welded steel lockers will provide years of maintenance free service
• Designed for industrial, commercial, mining,
institutional, sports, educational and government facilities
• Locker components are welded together, eliminating nuts, bolts and rivets
• Dimensions: 12" W x 18" D x 72" H
• Scratch-proof recessed plastic pocket, 10-gauge padlock hasp
• Doors are completely flush to locker frame
• Ventilation holes on frame cross piece
•
•
•
•
•
•
•
•
Single tier lockers include hat shelf and three hooks
Double and triple tier lockers have two hooks per opening
Frame is 16-gauge steel
Door frames are 20-gauge with full length 24-gauge double panel
Baked enamel grey paint finish (beige also available)
Recessed base colour: black
Custom colours available (subject to min.quantities)
Mesh door lockers available with slope tops and recessed base
TO ORDER:
, double, triple
1. Select single
ker.
or six-tier loc
locker with
2. Select a basic essed
rec
,
top
g
pin
slo
base or both.
of
the quantity
3. Determine
or 4).
nks of 1, 2, 3
each bank (ba
le
ab
kerette avail
Note: 6-tier loc 1 only.
of
nk
ba
in
SINGLE TIER LOCKERS
Type
Basic style
w/Slope top
w/Recessed base
w/Recessed base & slope top
w/Mesh door basic style
Bank of 1
Model No.
FC116
FC125
FC119
FC122
FC723
Wt.
lbs.
52
56
56
60
52
Bank of 2
Model No.
FC152
FC161
FC155
FC158
FC725
Wt.
lbs.
96
104
104
112
96
Bank of 3
Model No.
FC186
FC195
FC189
FC192
FC727
Bank of 1
Model No.
FC246
FC255
FC249
FC252
FC716
Wt.
lbs.
53
57
57
61
53
Bank of 2
Model No.
FC270
FC279
FC273
FC276
FC718
Wt.
lbs.
98
106
106
114
98
Bank of 3
Model No.
FC294
FC303
FC297
FC300
FC720
Bank of 1
Model No.
MH710
MH714
MH718
Wt.
lbs.
55
63
54
Bank of 2
Model No.
MH711
MH715
MH719
Wt.
lbs.
100
116
99
Bank of 3
Model No.
MH712
MH716
MH720
Wt.
lbs.
139
151
151
163
139
Bank of 4
Model No.
FC222
FC231
FC225
FC228
FC729
Wt.
lbs.
183
199
199
215
183
Wt.
lbs.
141
153
153
165
141
Bank of 4
Model No.
FC318
FC327
FC321
FC324
FC721
Wt.
lbs.
187
203
203
219
187
Wt.
lbs.
142
167
140
Bank of 4
Model No.
MH713
MH717
MH721
Wt.
lbs.
189
222
186
ATURES:
OPTIONAL FE
for all lockers
Also available
s
ck
Lo
r
• Cylinde
es
• Number Plat
• Coat Rods
cket
• Chrome Po
DOUBLE TIER LOCKERS
Type
Basic style
w/Slope tops
w/Recessed base
w/Recessed base & slope top
w/mesh door basic style
TRIPLE TIER LOCKERS
Type
Basic style
w/Recessed base & slope top
w/mesh door basic style
6-TIER LOCKERETTE
• Sloping top prevents
the collection of
debris and is easier
to maintain against
the accumulation
of dust
• Recessed base raises
locker 4" off the floor
• Scratch resistant
plastic pocket
• Ideal locker for storage of personal effects
where space is at a premium
• 6 vertical compartments measuring
12" W x 18" D x 12" H each
Description
Model No.
Basic style
FC330
FC339
w/Slope top
w/Recessed base FC333
w/Recessed base FC336
& slope top
FD196
w/Mesh door
basic style
Available in bank of one only.
B52
Wt. lbs.
56
60
60
64
50
FC330
FD196
10986E
OPTIONAL FEATURES
AVAILABLE:
Cylinder lock FC100
Number plates
Installed - FC101
Uninstalled - FC102
Coat rod FC103
Chrome pocket FC598*
*Available only on
standard lockers
1257_53_eng
2/21/07
10:37 AM
Page B53
LOCKERS & BENCHES
PLASTIC LOCKERS
16-DOOR ARCHETTE
A NEW GENERATION OF LOCKERS
1 units
of FH727
1 units
of FH728
2 units
of FC693
5 units
of FH725
5 units
of FH726
Engravable
aluminum
Plate
Built-in
sloped top
for extra
storage
1 unit
of FC695
1 units
of FC691
3 units
of FC689
• These plastic lockers are maintenance free
• Drain holes make them easy to clean, just hose them down with soap and water
• Durable plastic construction makes them perfect for wet environments:
food processing plants, athletic facilities, etc…
• New optional clear door design allows for easy inspection locker contents
SPECIFICATIONS:
• Easy Cleaning
• Maintenance free
• Durable polyethylene Construction
• Rust-Proof
• No-Corrosive
• No need for painting
• Each unit is fully assembled
• Easy Installation
• Space saving design
Model
Dimensions
Weight
No.
Description
W" x D"
lbs
Hook
FH725 12"H Locker (Usually Stacked 6 units high)
12 x 15
6
No
FH726 12"H Locker (Usually Stacked 6 units high)
12 x 15
6
No
FH727 12"H Locker
12 x 15
8
No
FH728 12"H Locker
12 x 15
8
No
FC689 18"H Locker (Usually Stacked 4 units high)
15 x 15
10
No
FC691 18"H Locker
15 x 15
45
No
FC693 36"H Locker (Usually Stacked 2 units high)
12 x 15
16
Yes
FH729 36"H Locker
12 x 15
18
Yes
FC695 Full size 60"H locker
15 x 18
42
Yes
* All dimensions and weight are nominal and may vary due to moulding tolerances.
* Mounting hardware not included
Shelf
No
No
No
No
No
No
No
No
Yes
Top
Flat
Flat
Slope
Slope
Flat
Slope
Flat
Slope
Slope
Door
colour
Grey
Clear
Grey
Clear
Grey
Grey
Grey
Grey
Grey
•
•
•
•
•
•
•
Ideal for confined spaces
16 lockable compartments
Bar for hanging garments
Compartments are 12" W x 18" D x 12" H
Overall dimensions: 72" W x 18" D x 72" H
Colour: Light grey
Assembly required
Moofl No.
FC347
FC348
Type
w/Padlock Hasp
w/Cylinofr Lock
Wt•lbs.
123
131
LOCKER ROOM
BENCHES
DURA-LOCKERTM WELDED STEEL LOCKERS
• Dura-LockerTM builds on the benefits of our standard lockers while adding durability and an overall more
modern look into one package
• Heavy-duty 16-gauge double panelled door has full
length handle and ventilation incorporated
• Redesigned bottom is galvanized to protect
against corrosion and also includes a
depression towards centre to evacuate water
• Innovative chrome spring embedded in full length
door strike ensures doors will remain closed
• New hook design 3/4" wide with rounded
edge to avoid damage to clothing
• Front lip of bottom meets flush
with floor to make cleaning easier
• Honeycomb door inserts available for quiet closing
• Dimensions: 12” W x 18” D x 72” H
• Colour: Baked enamel dark grey
• Necessary for any locker room
• Features chrome steel legs that can be used
free-standing or bolted to the floor
OPTIONS
Model No. Description
FH724
Honeycomb door insert
Type
Bank of 1
Model No. Weight lbs
Bank of 2
Model No. Weight lbs
Bank of 3
Model No. Weight lbs
Bank of 4
Model No.
Weight lbs
SINGLE LOCKERS
Basic
FH680
119
FH684
174
FH688
229
FH696
121
FH700
176
FH704
231
Basic
FH708
66
FH712
122
* Slope Tops & Recessed Base options also available.
FH716
178
FH720
233
FH676
64
Moofl
No.
FB002
FB003
FB004
FB005
L"
72
48
72
96
Dimensions
x W" x H"
x 12 x 17
x 10 x 16 1/2
x 10 x 16 1/2
x 10 x 16 1/2
Type
Steel
Wood
Wood
Wood
Wt.
lbs.
35
23
31
39
DOUBLE LOCKERS
Basic
FH692
65
TRIPLE LOCKERS
20350E
B53
1257_54_56_eng
2/21/07
11:05 AM
Page B54
HEATERS & FANS
RADIANT PLUG–IN UNDER
DESK HEATER
DELUXE PORTABLE FAN
FORCED UTILITY HEATER
• Safe comfortable radiant heat
• Extremely economical to operate
- only draws 1.4 A
• Will not effect computer work stations
• Includes velcro tabs and wire support
hardware for easy installation
• Lighted on-off kick switch
• Built-in safety tip-over switch
Volts
Model No. BA960
120
• Two heat settings provide full comfort
and economic operation
• Automatic built-in thermostat
• Fan only setting
• Tip over safety switch and thermal limit control
• Built-in carrying handle and front safety guards
• Safety buzzer sounds if unit is tipped over
• Grounded cord and plug
• Chrome plated carry handle and front guards
Watts
170
Amps
1.4
Dim"
15 x 22 x 1
Model No.
BA965
PORTABLE FAN FORCED/
RADIANT UTILITY HEATER
Volts
120
Watts
600/900/1500
BTU/H
2048/3072/5120
Amps
5.0/7.5/12.5
Model
No.
EA005
Volts
120
Watts
1000/1500
Amps
10.8/12.5
Volts
240/208
PH
1
Watts
4800/3600
BTU/H
16,380/12,285
Amps
20.0/17.3
Plug
Type
#6-30P
FAHRENHEAT HEAVY-DUTY
CEILING MOUNT HEATER
Two heat settings (1500 W and 1000 W)
Provides full comfort and efficient operation
Fully adjustable automatic thermostat
Safety overload switch
Power signal light
Top mounted handle and controls
Grounded plug and controls
Model No.
BA967
BTU/H
4437/5120
• Built-in thermostat
• Safety high temperature limit
• Steel spiral fin brazed to metal sheath elements
for maximum heat transfer
• 6' heavy-duty cord
• Built-in handle/cord storage
• Permanently lubricated motor
PORTABLE OPEN
COIL HEATER
•
•
•
•
•
•
•
Watts
1300/1500
CONTRACTOR HEATER
• Three heat settings provide fuller comfort
and efficient operation
• 600 W radiant, 900 W fan forced
• 1500 W fan forced and radiant
• Chrome-plated safety grille
• Automatic built-in thermostat
• Ceramic core element
• Tip over safety switch and thermal limit
Model No.
BA963
Volts
120
BTU/H
3410/5120
• Multi wattage covering 2500-5000 W
(2500 W, 3332 W, 4165 W, 5000 W)
• Rugged heavy-duty industrial heater
• Ideal for use in barns, storage rooms,
workshops, garages, warehousing
• Built-in ceiling bracket for easy mounting
• Automatic fan delay
• 240 V
Model No. EA012
Amps
8.3/12/5
INDUSTRIAL GRADE, HIGH VOLUME BELT-DRIVE DRUM FANS
High volume, heavy-duty portable air circulators are ideal for cooling warehouses,
garages, workshops and other similar
buildings. Heavy-gauge, sturdy steel construction provides durability. Large rubber
wheels and two handles for easy movement. Complete with 10' grounded cords.
CUL approved.
NI275
Model
No.
EA108
EA109
NI275
Drive
Type
Belt
Belt
Belt
Blade
Size"
36
42
48
Volts
120
120
120
HP
1/2
3/4
1
Max
Amps
8
10.8
15
CFM
14,800
18,000
23,000
Wt.
lbs.
111
132
153
SMOKE EJECTORS
• Remove smoke, welding fumes and undesirable
contaminants from the air or bring clean air in
• Reversible smoke ejectors are equipped with a totally enclosed
ball bearing motor with automatic overload protection
• Units are CSA approved
• Explosion proof models in accordance with
Class 1 Group D/Class II Group EFG
• All are 115 V AC, 1/3 HP, 1725 RPM equipped with a 6' power
cord, cord holder and cadmium plated protection guards
• Hoses are fire safe, single ply, PVC fabric with a spring wire helix
Model
No.
BA099
BA100
BA101
BA102
BA103
BA104
B54
CFM
Type
@.10" SP
Fan Dia."
Standard
1620
12
Exp. Proof
1620
12
Standard
3050
16
Exp. Proof
3050
16
Standard
3700
18
Exp. Proof
3700
18
L"
16
16
13 5/8
13 5/8
14 3/8
14 3/8
x
x
x
x
x
x
x
W"
14 5/8
14 5/8
18 1/2
18 1/2
21
21
Fan Dim.
x
H"
x
14 5/8
x
14 5/8
x
18 1/2
x
18 1/2
x
21
x
21
COLLAR ADAPTORS
FLEXIBLE HOSES
Model
No.
BA026
BA028
BA029
Model
No.
BA049
BA050
BA051
15213E
Fan
Dia"
12
16
18
Fan
Length'
15
20
20
Fan
Dia."
12
16
18
Wt.
lbs.
17
1257_54_56_eng
2/21/07
11:05 AM
Page B55
FANS & AIR CONDITIONERS
EXHAUST FANS & PANEL FANS
AIR CONDITIONERS
WALL EXHAUST FAN
Highly efficient whisper quiet models are
designed for dependable long life use.
• Sturdily constructed, direct drive, horizontal discharge
for industrial, commercial and farm applications
• Constructed from all-aluminum extrusions
• Heavy-duty OSHA motor mount/guard
• Ball-bearing with overload protection
• Aluminum shutters automatically open
when fan starts and close when fan stops
• Complete with aluminum shutters
•
•
•
•
Model
No.
BB117
EA083
EA081
EA235
Exhaust Fan
EXHAUST SERIES
C
A
D
The Exhaust series comes
equipped with aluminum louvres which opens automatically
when fan is operating.
BA
A"
Dimensions
B"
C"
D"
RPM
STANDARD
BA129
BA132
BA135
BA138
BA141
17
18 3/4
20 3/4
22 3/4
24 3/4
17
18 3/4
20 3/4
22 3/4
24 3/4
28 3/4
HP
CFM
FREE AIR
14
15 3/4
17 3/4
19 3/4
21 3/4
6 3/4
6 3/4
6 3/4
6 3/4
6 3/4
11 1/2
11 1/2
11 1/2
11 1/2
12 1/4
1725
1725
1725
1725
1725
14
15 3/4
17 3/4
19 3/4
21 3/4
25 3/4
6 3/4
6 3/4
6 3/4
6 3/4
6 3/4
6 3/4
11 1/2
11 1/2
11 1/2
11 1/2
12 1/4
12 1/4
1725/1140
1725/1140
1725/1140
1725/1140
1725/1140
1100/800
2-SPEED
BA130
BA133
BA136
BA139
BA142
BA495
1/4
1/4
1/4
1/4
1/3
1450
2200
3300
4300
5000
1/4
1/4
1/4
1/4
1/3
1/3
1450/1000
2200/1450
3300/2100
4300/2850
5000/3250
5000/3000
PANEL SERIES
Used when moving air within
an enclosed area
Model
No.
Dimensions
A"
B"
Fan
Dia."
Model
No.
Dimensions
A"
B"
2-SPEED
STANDARD
17
18 3/4
20 3/4
22 3/4
24 3/4
11 1/2
11 1/2
11 1/2
11 1/2
12 1/4
FAN GUARDS
12
14
16
18
20
24
BA482
BA483
BA484
BA485
BA486
BA487
The use of fan guards is compulsory
unless the fan is installed out of reach at
least 8 feet from the floor or ground.
Fan Dia."
12
14
16
18
20
24
W"
17.5
18
17.7
22
Dimensions
x D"
x
x 15.7 x
x 21.4 x
x 21.1 x
x 25.6 x
Wt.
kg
29
30
35
51
H"
12.6
13.9
13.6
15.7
Model No.
BA496
BA497
BA498
BA499
BA500
BA501
SPEED CONTROLS
Model
No.
Description
BA085 Two-speed switch 116V
20" BOX FAN
• Slim line
• 5 slim blades
• 3-speed whisper quiet operation
• Durable steel body
• No tools required for assembly
Model No. BA330
OFFICE FANS
• All around general purpose fans are light duty
• Best suited for office environments
• 3-speed oscillating except for EA068
which is 2-speed non-oscillating
Description"
6 Clip-on/Desk
12 Desk
16 Desk
16 Pedestal
16 Pedestal w/remote
18 Pedestal
Pedestal
Clip-on
Desk
INDUSTRIAL ROLLAIRE MODEL
CART MOUNTED 18" FAN
A
PANEL
BA059
BA062
BA064
BA067
BA070
EER
cooling
10
9.8
9.7
10
• 18" floor fan is ideal for different areas, from the store to the
warehouse and for offices where air circulation is needed
• 3-prong plug with heavy-duty ground industrial wire
• Rear mounted controls
• Powerful, quiet 3-speed motor
• Rotates up for vertical airflow
• 120 V
Model No. BB116
Model
No.
EA068
BA175
EA070
EA071
EA072
BA778
• Sturdily constructed, direct drive, horizontal discharge
for industrial, commercial and farm applications
• Motors are totally enclosed, continuous run, fan duty
with built-in automatic overload protection
• Ball bearing motors for easy maintenance
• 120 V, other voltages available on request
• Baked enamel finish
Panel Fan
• Motor CSA approved
B
12
14
16
18
20
Remote
Control
No
Yes
Yes
Yes
FREE AIR
PANEL FANS
Fan
Dia."
BTU
5,200
6,000
8,000
10,200
18" FLOOR FAN
EXHAUST
Model
No.
Compact design fits most windows
3-setting thermostat
2-speed fan
Washable rigid filter
17
18 3/4
20 3/4
22 3/4
24 3/4
28 3/4
11 1/2
11 1/2
11 1/2
11 1/2
12 1/4
12 1/4
• Ideal for manufacturing,
warehouses, workstations, etc.
• Cart features 5" diameter plastic wheel
• Cart height is fully adjustable from 33" to 50"
• 18" fan head is 3-speed
• Energy efficient – draws only 2.6 Amps
SPECIFICATIONS:
• CFM: 5500 – high speed,
4600 – medium speed,
3500 – low speed
• Motor: 1/8 HP
• Weight: 24 lbs.
Model No. EA041
20" COMMERCIAL
AIR CIRCULATOR
• Ideal for offices, retail, banks, hotels, etc.
• Energy efficient – draws only 2.1 Amps
• Rugged all metal construction
– adjustable height up to 60"
• Pull chain switch – 3-speed control
• Double locking guard for safety
• 72" grounded power cord
• cUL US approved and also meets
OSHA standards specifications
• CFM: 5950 – high speed, 3500 – low speed
• Motor: 1/6 HP drip proof motor
• Weight: 32 lbs.
Model No. EA009
15214E
B55
1257_54_56_eng
2/21/07
11:05 AM
Page B56
AIR CIRCULATION EQUIPMENT
AIR CIRCULATING FANS
• Effectively cools large areas in factories, offices,
stores, cafeterias and other public places
• Provide relief from heat by creating gentle
movements of air
• 2 speeds, 120 V, ball bearing totally
enclosed permanently lubricated
permanent split capacitor with pull chain
• Built-in thermal overload protection included
• Fan heads are available on an adjustable
pedestal base or a rugged wall mount
ted
Limi sive
u
excl ears
y
2 anty!
r
war
• The heavy gauge 27" steel dome base is
connected with 5 carriage bolts and is
adjustable from 48 7/8" to 74 5/8" high
• The one-piece rigid wall mount bracket can
be installed on wood, metal or concrete
(hardware not included)
• Precision balanced coated steel blades
• Double locking chrome plated fan guards
• 3-conductor SJT type cord for added safety
• Meets OSHA standards, UL and ULC listed
INDUSTRIAL AIR CIRCULATORS (NON OSCILLATING)
1/4 hp 2 -speed motors
Fan head tilt - Pedestal: 10° down or 28° up. Wall mount: 40° down or 0° up.
Pedestal
Model No
EA225
EA252
Wall Mount
Model No
EA251
EA253
Blade
Size"
24
30
Volts
120
120
HP
1/4
1/4
NI250
Max
Amps
2.2
2.5
CFM
High-Low
7000-5900
8200-6200
Max
Amps
2.2
2.5
CFM
High-Low
7000-5900
8200-6200
EA225
INDUSTRIAL AIR CIRCULATORS (OSCILLATING)
1/4 hp 2 -speed motors
Oscillates in 90° arc or can be locked in a fixed position
Fan head tilt: Pedestal or wall mount: 15° up or down.
Pedestal
Model No
NI252
NI080
Wall Mount
Model No
NI249
NI250
Blade
Size"
24
30
Volts
120
120
HP
1/4
1/4
MACH SERIES: HIGH PERFORMANCE AIR CIRCULATORS
1/3 hp 2 -speed motors
Fan head tilt - Pedestal: 10° down or 28° up. Wall mount: 40° down or 0° up.
EA131
Pedestal Mount
Model No.
EA131
EA133
Wall Mount
Model No.
EA132
EA134
Blade
Size"
24
30
Fan
Head
MACH24
MACH30
Volts
120
120
HP
1/3
1/3
Max.
Amps
2.6
2.8
CFM
High-Low
7100-6000
8900-6900
ted
Limi ars
3-yeanty!
r
war
LEADING EDGE CEILING FANS
ECONOMICAL CEILING FANS
Ceiling fans will recirculate warm air and heat from the ceiling and push it
down. In summer a ceiling fan system supplements air-conditioned areas by
reducing the temperature. They will save energy and cut fuel costs.
Adjustable speed control not included.
Prevent heat loss in your plant, cut fuel costs by up to 30% and increase
employee productivity with these economical ceiling fans.
HEAVY-DUTY COMMERCIAL CEILING FANS
• 36" fan is designed for smaller areas
• Ideally suited for isolated areas
and as a supplemental cooling fan
HEAVY-DUTY INDUSTRIAL
CEILING FANS
Model
No.
BA152
BA154
BA156
• 56" fan for spacious applications where
maximum area coverage is required
• For both heat destratification
and summertime cooling
• Powerful, heavy-duty
motor for mounting
heights to 45 feet
BA186
BA187
BA185
Max
Volts
CFM
* Area Coverage
Per Fan
Wt.
lbs.
1600 sq. ft.
2025 sq. ft.
20
22
3800 sq. ft.
5000 sq. ft.
24
30
COMMERCIAL CEILING FANS
NI271
NI272
36
48
120
120
12,500
21,000
INDUSTRIAL CEILING FANS
BA318
BA319
56
60
120
120
27,500
46,000
Floor Area
Covered
600 cu.ft.
900 cu.ft.
1,500 cu.ft.
Variable Speed
Variable Speed
Variable Speed
Controls 1 Fan
Controls up to 3 Fans
Controls up to 10 Fans
• Totally encloses 56" and 60" diameter fans
• Mounts directly to fan rod with no
air flow interruptions
• Vinyl coated
• Safety cable attachment 3/32", 7 x 7
galvanized aircraft cable and 920 lbs.
breaking strength
• Twelve spoke cross bar construction 5 ga.
(.207) radial, 5 ga. (.207) on 3" centres
Model No. BA327
ADJUSTABLE SPEED CONTROL FOR CEILING FANS
REVERSIBLE CEILING FAN
BA320
56
120
27,000
3800 sq.ft.
*Area coverage rated for heat destratification at 20' blade mounting height.
B56
CFM
Air Del.
7,100
13,000
20,500
CEILING FAN GUARD
• Patented dual pitch fan provides identical airflow
volume in either forward or reverse rotation
• Ideally suited for exhausting stale air and condensation removal
• For industrial applications with mounting heights of 10' or higher
Blade
Size"
Fan
Dia."
36
48
56
CONTROLS
REVERSIBLE CEILING FAN
Model
No.
For: manufacturing plants, warehouses, repair shops, aircraft hangers,
restaurants, indoor tennis courts, auditoriums.
• Recirculates hot air and heat from ceiling down to floor and work area
• Use wasted heat from production processes and lighting systems
• Air movement in summer reduces humidity and temperature 8° (chill effect)
• Readily installed, uses 110 V/60 Hz
24
• Manufactured to
UL specifications
• For single and
multiple fan
installations
18871E
Model
No.
BA323
BA324
BA325
BA326
Volts
120
120
120
120
Amps
3
6
8
12
# of Ceiling Fans Controlled
56" Blade
60" Blade
2
1
5
3
6
4
10
8
1257_57_65_eng
2/21/07
11:08 AM
Page B57
BALANCERS & REELS
BALANCERS
FA125 - FA130
• Installed easily in minutes
• Recommended that a secondary support chain/cable be
attached to equipment suspended overhead
• Designed to enhance productivity, comfort and safety
• Protect tools from being damaged
• Aircraft (steel/nylon) cable and a standard
360° swivel hanger
• No force required to maintain load,
light force to position load
Model No.
FA124
FA125
FA126
FA127
FA129
FA131
FA133
FA135
Mfg. No.
GM-31
RB2
RB4
RF6
RF8
BF9
BF13
BF18
Locking Model No.
FA128
FA130
FA132
FA134
FA136
Mfg. No.
RFL6
RFL8
BFL9
BFL13
BFL18
Capacity lbs.
1-12
1-2
2-4
4-6
6-8
6-9
9-13
13-18
Cable Travel ft'
4.8
5.2
5.2
6.6
6.6
6.6
6.6
6.6
Duty
Light
Light
Light
Light
Light
Light
Light
Light
FA124
AUTOMATIC REWIND AIR HOSE REELS
•
•
•
•
Rubber hose
300 PSI/20 Bar maximum working pressure
3' lead-in supply hose
3/8" ID hose
Model No.
FH461
FH462
• Automatic locking mechanism maintains the desired length of hose
• Quick release on bracket allows reel to be removed for on site use
• Ceiling or wall mount (Hardware included)
Hose Length'
25
50
Connections"
1/4 brass NPT
3/8 brass NPT
FH461
Wt. lbs.
10.2
18.0
MANUAL REWIND AIR HOSE REELS
•
•
•
•
•
•
•
•
•
All weather design for indoor or outdoor use
Rugged unitised bolted construction
Heavy gauge steel reel frame, spool, and drum
Drag spring reduces self-unwinding
Holds 3/8" ID hose (Sold separately)
Model No.
FH463
FH464
3/8" brass NPT fittings
250 PSI/16.7 Bar maximum working pressure
Corrosion resistant powder coated finish
Heavy gauge welded mounting bracket
(Hardware included)
Length'
50
100
Wt. lbs.
9.7
13.2
FH463
HOSE REELS
• Adjustable hose bumpers allows to maintain
any length of hose outside the reel
• 4 bolt mounting base for easy installation
• Low pressure (300 PSI) - small capacity for
general air or water, standard hose included,
maximum temperature 150°F
• Can position for wall, floor, ceiling or truck mounting
• Permanently lubricated
• Full flow shaft and swivel connection
assures max product delivery
• Flexible hose connection required between source
hose and reel inlet to prevent misalignment
Model
No.
TN315
TN316
TN317
TN318
TN319
TN320
Mfg.
No.
4435-OLP
5635-OLP
4625-OLP
7650-OLP
7850-OLP
D9375-OLP
Series
4000
5000
4000
7000
7000
9000
Max
PSI
300
300
300
300
300
300
Hose
Length'
35
35
25
50
50
75
Hose
ID"
1/4
3/8
3/8
3/8
1/2
3/4
Hose
OD"
.500
.688
.688
.688
.844
1.188
Hose
Outlet"
1/4
1/4
1/4
1/4
3/8
3/4
Reel
Inlet"
3/8
3/8
3/8
1/2
1/2
1
L"
12 5/8
13 3/4
12 5/8
19
19
24 1/4
Dimensions
x W"
x 5 3/8
x
6
x 5 3/8
x
7
x
7
x
12
TN315
x
x
x
x
x
x
x
H"
12 7/8
14 1/2
12 7/8
20 1/4
20 1/4
26 1/4
TN320
LIGHTWEIGHT & ECONOMICAL
INDUSTRIAL REELS
•
•
TN318
Lighter spring driven hose reel designed for applications
that are less demanding, yet require a product that
can withstand industrial use
Steel components are individually powder coated and teamed
with composite materials, which virtually eliminates corrosion
STEEL & COMPOSITE REELS
Model
No.
Drive
Type
Hose
I.D."
Hose
Length'
Max
PSI
Hose
Outlet"
Reel
Dimensions
Shipping
Inlet"
Depth
Width
Height
Wt (lbs)
(M)NPT
(F)NPT
LIGHTWEIGHT FOR AIR or WATER - designed for less demanding applications yet can withstand industrial use - sold with hose
FH522
Spring
1/4
35
300
1/4
3/8
16 1/2
5 3/4
17 5/8
22
FH523
Spring
3/8
25
300
1/4
3/8
16 1/2
5 3/4
17 5/8
25
FH524
Spring
3/8
35
300
1/4
3/8
16 1/2
5 3/4
17 5/8
23
FH525
Spring
3/8
50
300
1/4
3/8
16 1/2
6 1/4
17 5/8
29
2-Year Limited Warranty Standard colour as shown - black composite / powder coat paint red base & guide arm
19594E
FH522
B57
Document1
2/22/07
8:12 AM
Page 1
100% Canadian Owned
Kleton builds quality and dependability
into all of their products. The same is
true for products specially built to meet
your specifications. Look throughout the
catalogue for the Kleton Custom Symbol
indicating which products can be
customized to meet your specific needs.
Call your Kleton dealer
with specs today!
• Strip Curtain Doors
• Platform Trucks
• Safety Guards
• Bollards
• Gas Cylinder Cabinets
• Workbenches
• Shelf Trucks
• And more...
Look for this symbol throughout
the catalogue indicating which
products can be customized to
meet your specific needs.
1257_57_65_eng
2/21/07
11:09 AM
Page B59
KLETON MODU-WORKBENCHES
Riser Shelf
HEAVY-DUTY
WORKBENCHES
Back & End Stops
CREATE A BENCH FOR YOUR APPLICATION!
• Variety of tops: 14-gauge steel wood filled, laminated wood,
shop top and plastic laminate
• Wide range of top sizes from 24" x 60" up to 36" x 72"
• Variety of six pedestals to choose from with working
heights of 31" or 34"
• All welded 14-gauge steel legs 22" or 28" deep with a working height
of 34", comes standard with electrical duplex knockouts
• Three-piece 14-gauge steel stringer provides stable work
surface for all sizes of benches
• Options: Riser shelves, drawers, back stops & end stops, lower
shelves, cam locks and leg extensions
Single pair of
• Capacities range from 1000 lbs. to 3000 lbs.
Bench Legs
• All mounting hardware included and shipped knocked down
• Powder coated Kleton light grey
Model
No.
FF912
FF913
FF914
FF916
FF920
FF915
FF917
FF979
FF934
FF935
FF936
FF956
Wt.
lbs.
14
15
35
35
2
40
40
11
14
16
18
19
Description
Single pair of legs, 32 1/4"H x 22"D
Single pair of legs, 32 1/4"H X 28"D
KIT - 2 x FF912 and 1 x FF979
KIT - 2 x FF913 and 1 x FF979
Bench leg gussets (pr.)
Mobile KIT - 2 x FF912, 1 x FF979, casters
Mobile KIT - 2 x FF913, 1 x FF979, casters
Universal stringer
Lower Shelf, for 48" top
Lower Shelf, for 60" top
Lower Shelf, for 72" top
Riser Shelf, 9" x 48"
Model
No.
FF957
FF958
FF704
FF705
FF708
FF792
FF793
FF794
FH473
FH476
FG732
*Note: 22" D bench legs fit tops 24" D
28" D bench legs fit tops 30" and 36" D
STEEL WOOD-FILLED TOP:
SHOP TOP:
• Heavy-duty 14-gauge steel
with formed edges
• Reinforced wood core for
sound and strength
• Overall thickness 1 3/4"
• Colour: Kleton light grey
• For medium-duty applications
• 3/8" double sealed resin custom
board covers solid 1"
hardwood core
• Overall thickness 1 3/4"
LAMINATED WOOD TOP:
PLASTIC LAMINATE TOP:
• Heavy-duty hardwood top
• Solid maple laminations
• Overall thickness 1 3/4"
• Light-duty top with smooth white
leather plastic laminate face covers
45-lbs density particle board
• Overall thickness 1 5/8"
Steel
Wood-Filled
Size"
24 x 60
30 x 60
30 x 72
36 x 60
36 x 72
Model
No.
FD031
FD033
FD034
FD035
FD036
Wt.
lbs.
72
92
110
108
120
Laminated
Wood
24 x 60
30 x 60
30 x 72
36 x 60
36 x 72
FD016
FD020
FD021
FD026
FD027
70
88
105
105
126
30 x 30
30 x 72
36 x 72
FD004
FD005
FD007
88
105
126
30 x 30
30 x 72
36 x 72
FD011
FD012
FD014
72
86
126
Shop
Top
Plastic
Laminate
Universal
Stringer
Lower Shelves
Description
Riser Shelf, 9" x 60"
Riser Shelf, 9" x 72"
Back Stop, 3" x 48"
Back Stop, 3" x 60"
Back Stop, 3" x 72"
End Stop, 3" x 24"
End Stop, 3" x 30"
End Stop, 3" x 36"
Drawer, 18" x 21"
Cam lock w/pair of keys for drawers
Leg Extensions to make height adjustable from 34"-39"
- in 1" increments (set of 4)
Wt
lbs.
24
29
8
10
12
4
5
6
21
1.0
KLETON MODU-WORKBENCH
PEDESTALS
MODU-WORKBENCH TOPS
TOP TYPE
Drawer
• Made from all welded heavy gauge steel; 18" W x 21" D x 29 1/4" H
• Full extension drawers' capacity: 100 lbs. per drawer
• Optional bases add height, 3" increments
(maximum 2 bases per pedestal)
• Large drawers: 14 1/2" W x 20 1/2" D x 4 1/4" H
• Small drawers: 14 1/2" W x 20 1/2" D x 2 1/4" H
• Doors 16" W x 24" H with adjustable interior shelf
• Doors are reversible, can be opened on
either right or left side
• Doors and drawers have knockouts for optional locks
• All bench configurations assume installation of one base
• Any bench using a leg/pedestal combination
requires one pedestal base for equal height
• Keyed alike cam locks available
FH471
• All mounting hardware included
• Colour: Cabinet frames Kleton light grey,
doors and drawers Kleton blue
FH469
FH467
FH468
Model No.
FH467
FH471
FH469
FH468
FH472
FH470
FH474
FH475
FH476
FH484
FH485
* Other sizes are available
If you don't see the workbench configuration that suits your needs give us a
call. We can custom build to your requirements.
19595E
FH472
Description
Single Door Pedestal
2 Door Pedestal
2-Large Drawer, Half Door Pedestal
4-Large Drawer Pedestal
4-Small Drawer, Half Door Pedestal
4-Small and 2-Large Drawer Pedestal
3" Base for Pedestal
Cam lock for doors
Cam lock for drawers
Cam lock for doors, keyed alike
Cam lock fo drawers, keyed alike
FH470
Wt. lbs.
48
48
59
75
63
94
4.5
0.2
1.0
0.2
1.0
B59
1257_57_65_eng
2/21/07
11:09 AM
Page B60
INDUSTRIAL GRADE WORKBENCHES
Top
Size"
Wt.
lbs.
Model
No.
STEEL - WOOD FILL
36 x 72
36 x 60
30 x 72
30 x 60
24 x 60
155
143
145
127
107
Top
Size"
FF658
FF657
FF656
FF655
FF653
Wt.
lbs.
Model
No.
177
165
167
149
129
Model
No.
36 x 72
30 x 72
30 x 60
-
161
140
123
-
FF679
FF677
FF676
-
LAMINATED WOOD
Wt.
lbs.
Model
No.
36 x 72
36 x 60
30 x 72
30 x 60
24 x 60
191
175
181
159
139
Top
Size"
Wt.
lbs.
Model
No.
197
172
155
-
FF715
FF713
FF712
-
SHOP TOP
FF707
FF706
FF703
FF702
FF700
LAMINATED WOOD
36 x 72
30 x 72
30 x 60
-
Top
Size"
Wt.
lbs.
STEEL - WOOD FILL
PLASTIC LAMINATE
36 x 72
36 x 60
30 x 72
30 x 60
24 x 60
212
196
202
180
160
LAMINATED WOOD
36 x 72
36 x 60
30 x 72
30 x 60
24 x 60
197
172
176
155
137
FF691
FF690
FF689
FF688
FF686
36 x 72
30 x 72
30 x 60
-
197
153
139
-
FF698
FF696
FF695
-
36 x 72
36 x 60
30 x 72
30 x 60
24 x 60
218
193
197
176
158
FG285
FG284
FG283
FG282
FG281
Top
Size"
Wt.
lbs.
Model
No.
Top
Size"
Wt.
lbs.
Model
No.
Top
Size"
Wt.
lbs.
Model
No.
Top
Size"
Wt.
lbs.
Model
No.
183
162
145
-
FG264
FG263
FG262
-
198
177
160
-
FG116
FG114
FG113
-
STEEL - WOOD FILL
PLASTIC LAMINATE
36 x 72
36 x 60
30 x 72
30 x 60
24 x 60
192
180
182
164
144
SHOP TOP
FG109
FG108
FG107
FG106
FG104
LAMINATED WOOD
36 x 72
30 x 72
30 x 60
-
STEEL - WOOD FILL
PLASTIC LAMINATE
36 x 72
36 x 60
30 x 72
30 x 60
24 x 60
206
194
196
178
158
FG253
FG252
FG251
FG250
FG249
36 x 72
30 x 72
30 x 60
-
183
143
129
-
FG256
FG255
FG254
-
36 x 72
36 x 60
30 x 72
30 x 60
24 x 60
198
177
177
160
142
FG095
FG094
FG093
FG092
FG090
36 x 72
30 x 72
30 x 60
-
198
158
144
-
FG102
FG100
FG099
-
36 x 72
36 x 60
30 x 72
30 x 60
24 x 60
212
191
191
174
156
Top
Size"
Wt.
lbs.
Model
No.
Top
Size"
Wt.
lbs.
Model
No.
Top
Size"
Wt.
lbs.
Model
No.
Top
Size"
Wt.
lbs.
Model
No.
Top
Size"
Wt.
lbs.
266
226
212
-
FG232
FG231
FG230
-
237
216
199
-
FG144
FG142
FG141
-
36 x 72
36 x 60
30 x 72
30 x 60
24 x 60
260
248
250
232
212
SHOP TOP
FG229
FG228
FG227
FG226
FG225
LAMINATED WOOD
36 x 72
36 x 60
30 x 72
30 x 60
24 x 60
B60
266
245
245
228
210
36 x 72
30 x 72
30 x 60
STEEL - WOOD FILL
PLASTIC LAMINATE
FG221
FG220
FG219
FG218
FG217
36 x 72
30 x 72
30 x 60
-
266
226
212
-
36 x 72
36 x 60
30 x 72
30 x 60
24 x 60
231
219
221
203
183
SHOP TOP
FG137
FG136
FG135
FG134
FG132
LAMINATED WOOD
FG224
FG223
FG222
-
36 x 72
36 x 60
30 x 72
30 x 60
24 x 60
237
216
216
199
181
36 x 72
30 x 72
30 x 60
PLASTIC LAMINATE
FG123
FG122
FG121
FG120
FG118
36 x 72
30 x 72
30 x 60
13322E
237
216
199
-
232
220
222
204
184
Model
No.
36 x 72
36 x 60
30 x 72
30 x 60
24 x 60
238
217
217
200
182
218
193
176
-
FG296
FG295
FG294
-
36 x 72
30 x 72
30 x 60
-
218
174
160
-
FG288
FG287
FG286
-
Top
Size"
Wt.
lbs.
Model
No.
212
191
174
-
FG280
FG279
FG278
-
36 x 72
30 x 72
30 x 60
36 x 72
30 x 72
30 x 60
-
212
172
158
-
FG272
FG271
FG270
-
Top
Size"
Wt.
lbs.
Model
No.
238
217
200
-
FG248
FG247
FG246
-
SHOP TOP
FG245
FG244
FG243
FG242
FG241
LAMINATED WOOD
FG130
FG128
FG127
-
36 x 72
30 x 72
30 x 60
-
PLASTIC LAMINATE
FG269
FG268
FG267
FG266
FG265
STEEL - WOOD FILL
36 x 72
36 x 60
30 x 72
30 x 60
24 x 60
Model
No.
SHOP TOP
FG277
FG276
FG275
FG274
FG273
LAMINATED WOOD
183
162
162
145
127
Wt.
lbs.
PLASTIC LAMINATE
FF665
FF663
FF662
-
36 x 72
30 x 72
30 x 60
Top
Size"
SHOP TOP
FG293
FG292
FG291
FG290
FG289
161
121
107
-
36 x 72
36 x 60
30 x 72
30 x 60
24 x 60
STEEL - WOOD FILL
Model
No.
36 x 72
30 x 72
30 x 60
-
SHOP TOP
FG261
FG260
FG259
FG258
FG257
Top
Size"
STEEL - WOOD FILL
PLASTIC LAMINATE
161
140
140
123
105
STEEL - WOOD FILL
36 x 72
36 x 60
30 x 72
30 x 60
24 x 60
Wt.
lbs.
SHOP TOP
FF672
FF671
FF670
FF669
FF667
LAMINATED WOOD
36 x 72
36 x 60
30 x 72
30 x 60
24 x 60
Top
Size"
36 x 72
30 x 72
30 x 60
-
PLASTIC LAMINATE
FG237
FG236
FG235
FG234
FG233
36 x 72
30 x 72
30 x 60
-
238
198
184
-
FG240
FG239
FG238
-
1257_57_65_eng
2/21/07
11:09 AM
Page B61
WORKBENCHES & WORKSTATIONS
Top
Size"
Wt.
lbs.
Model
No.
STEEL - WOOD FILL
36 x 72
36 x 60
30 x 72
30 x 60
24 x 60
261
249
251
233
213
267
246
246
229
211
Wt.
lbs.
Model
No.
267
227
213
-
FG629
FG630
FG631
-
Top
Size"
SHOP TOP
FG624
FG625
FG626
FG627
FG628
LAMINATED WOOD
36 x 72
36 x 60
30 x 72
30 x 60
24 x 60
Top
Size"
36 x 72
30 x 72
30 x 60
36 x 72
30 x 72
30 x 60
-
Model
No.
STEEL - WOOD FILL
36 x 72
36 x 60
30 x 72
30 x 60
24 x 60
PLASTIC LAMINATE
FG619
FG620
FG621
FG622
FG623
Wt.
lbs.
267
227
213
-
265
253
255
237
217
36 x 72
36 x 60
30 x 72
30 x 60
24 x 60
271
250
250
233
215
Wt.
lbs.
Model
No.
271
231
217
-
FG469
FG470
FG471
-
36 x 72
30 x 72
30 x 60
-
MAXI-BENCH WORKSTATIONS
36 x 72
30 x 72
30 x 60
-
Wt.
lbs.
Model
No.
271
231
217
-
36 x 72
36 x 60
30 x 72
30 x 60
24 x 60
232
220
222
204
184
FG472
FG473
FG474
-
36 x 72
36 x 60
30 x 72
30 x 60
24 x 60
238
217
217
200
182
Top
Size"
Wt.
lbs.
Model
No.
238
217
200
-
FG216
FG215
FG214
-
SHOP TOP
FG213
FG212
FG211
FG210
FG209
LAMINATED WOOD
PLASTIC LAMINATE
FG459
FG460
FG461
FG462
FG463
Top
Size"
STEEL - WOOD FILL
SHOP TOP
FG464
FG465
FG466
FG467
FG468
LAMINATED WOOD
FG632
FG633
FG634
-
Top
Size"
36 x 72
30 x 72
30 x 60
-
PLASTIC LAMINATE
FG205
FG204
FG203
FG202
FG201
36 x 72
30 x 72
30 x 60
-
238
198
184
-
FG208
FG207
FG206
-
72" LOUVERED BENCH RACK
FF068
CB364
Bench Rack
• All-welded louvered bench rack designed to be
permanently installed on a 72" wide workbench
• Provides tool and storage for assembly or repair
operations when combined with plastic parts bins
• 72" W x 40" H
• Bench rack weight: 95 lbs
• Bring your workstation to your work
• Features a sturdy 30" x 60" wood filled steel top and
heavy duty all-welded 14-gauge steel frame mounted
on 2 rigid, 2 swivel 5" phenolic casters (with brakes)
• Standard features: 42" high peg board panel, double
drawers, swivel-out stool, lower shelf; end stops
• Model FF068 (shown) includes fluorescent lamp,
25' incandescent drop light, 4-outlet power bar
• Model FF069 does not include
electrical fixtures or wiring
• Static benches (i.e. no casters) available
Model
No.
FF068
FF069
FF071
FF072
Description
Mobile, complete
Mobile, no Electrical
Static, complete
Static, no Electrical
Overall
Height"
76
76
70
70
Model No.
CB364
Description
Bench rack only
RACK/BIN COMBINATIONS
Wt.
lbs.
435
415
425
405
Red
CB173
Blue
CB172
Yellow
CB174
CB176
CB175
CB177
CB185
CB184
CB186
Bin Size:
Bin Size:
Bin Size:
Description
Rack w/144 bins,
7 3/8" L x 4 1/8" W x 3" H
Rack w/72 bins,
10 7/8" L x 5 1/2" W x 5" H
Rack w/36 bins,
14 3/8" L x 8 1/4" W x 7" H
MOBILE WORK CENTER
•
•
•
•
•
•
•
Keeps tools and supplies close at hand
Drawers can be locked with a padlock (not included)
Integrated tool carrier in push handle and 4 plastic bins to hold hand tools and small parts
Drawer dimensions are 22 7/8” W x 11 3/4” D x 1 5/8” H and have a full extension capacity of 75 lbs
5” x 1” casters (2 rigid, 2 swivel with brakes) for easy transportation
Total capacity: 500 lbs
Finish: Grey powder coat
Model No. FH675
18470E
B61
1257_57_65_eng
2/21/07
11:09 AM
Page B62
SERVICE BENCHES & CABINETS
KLETON MOBILE
CABINET BENCHES
Model
No
• Ideal for maintenance, repair and assembly departments
• Mount one, two or three cabinets
from six choices of cabinets
• Featuring heavy-duty 11-gauge steel base, 1 1/4"
thick laminated hardwood top, and push handle
• Equipped with four 5" roller bearing non-marking
casters for smooth, easy rolling
• Two rigid and two swivel casters with brakes
• Keyed alike cam locks available
• All mounting hardware included and shipped knocked down
• Colour: Bases Kleton blue, cabinet frames Kleton
light grey and drawers and doors Kleton blue
1. PEDESTAL STYLES
FH467
FH471
FH469
FH468
FH472
FH470
1. The pedestal style(s) that suits your needs
(to a maximum of 3 pedestals)
2. Add to that the assembly kit, whether
it be single, double or triple. Assembly kit
includes casters, base, and top.
Model Shown: FH468
plus FH467 plus FH408
FH471
One door
Two half doors
Two large drawers
and one half door
Four large drawers
Four small drawers and
one half door
Four small drawers and
two large drawers
FH469
FH468
FH407
FH408
FH409
FH475
FH476
Single
Double
Triple
Cam lock for doors
Cam lock for drawers
FH472
A VERSATILE UNIT COMBINING TOOL/STORAGE AREA WITH A WORK SURFACE
FF993
5-DRAWER CABINET:
•
•
•
•
1 drawer - 22 1/8" W x 16 3/4" D x 2" H
2 drawers - 22 1/8" W x 16 3/4" D x 4" H
2 drawers - 22 1/8" W x 16 3/4" D x 6 1/8" H
Colour: Red
3-DRAWER CABINET &
FLIPTOP PANEL
•
•
•
•
•
1 drawer - 22 1/8" W x 16 3/4" D x 2" H
2 drawers - 22 1/8" W x 16 3/4" D x 4" H
3 drawers - 26 1/2" W x 18" D x 12 3/8" H
Complete with locking bar
Colour: Red
Model
No.
FF993
FF994
FF995
Unit
Description
5 Drawers/3 Drawers
3 Drawers and side Shelves
5 Drawers and side Shelves
Wt.
lbs.
285
220
235
FF994
SINGLE PEDESTAL BENCH
INDUSTRIAL DUTY BENCHES
•
•
•
•
•
•
•
•
•
•
Heavy gauge steel cabinet with 1" round tube frame
Top tray with rubber mat
Equipped with four 4" roller bearing non-marking casters for smooth easy rolling
All swivel with brakes
Full extension drawers' capacity: 100 lbs. per drawer
20" W x 21" D x 37" H
800-lb capacity
Colour: Kleton blue and Kleton light grey
Keyed alike cam locks available
No assembly required
Model
No.
FF984
MH801
FH475
FH476
B62
Unit
Description
4-Drawer cabinet
Single door cabinet
Cam lock for door
Cam lock for drawers
75
97
84
98
Wt.
lbs.
98
80
1
1
FF984
MH801
19598E
35
65
95
1
1
FH470
KLETON MOBILE TOOL BENCHES
• Heavy-duty 11-gauge steel top and base
• Shelves made of 14-gauge steel with 1 1/2" lip
• Equipped with four 5" roller bearing
non-marking casters for smooth, easy rolling
• Two rigid and two swivel casters with brakes
• Overall size: 60" W x 22" D x 37" H
• Capacity: 1000 lbs.
• Colour: Kleton blue
51
52
2. ASSEMBLY KIT
Configure your own unit by choosing:
FH467
Wt.
lbs.
Description
1257_57_65_eng
2/21/07
11:10 AM
Page B63
TOOL CARTS & MOBILE BENCHES
INDUSTRIAL DUTY
MOBILE SERVICE BENCHES
Designed for moving heavy parts and tools to the job site.
Provides a strong, maintenance free surface to work on.
• 16-gauge all-welded steel construction
• Laminated hardwood top
• 5" x 1 1/2" resilient non-marking swivel casters w/ brake
• 18" W x 21" D x 4" H drawers
• 42" W x 24" D x 37" H
• 1000 lbs. capacity
• Kleton blue finish
• No assembly required
• Locks not included
Model No.
FF980
FF981
FF982
FF983
FH475
FH476
Description
2 Doors
1 Drawer/1 Door
4 Drawers/1 Door
8 Drawers
Cam lock w/pair of keys for doors
Cam lock w/pair of keys for drawers
TOOL TOTER CARTS
FF981
FF980
Wt. lbs.
235
190
275
300
.5
1.0
FF983
FF982
FH211
FH210
FH212
For safe convenient storage of tools and equipment.
An excellent addition to any tool centre
• Made for safe, convenient storage
of tools and equipment
• Don't waste time looking for your tools and jigs
• Each drawer is 15 1/4" x 23 3/4" x 4 3/4"
w/ padlocking hasp
• Carrier is 18" W x 24" D x 34 1/2" H with
2 1/2" hard rubber swivel casters
• Shipped knocked down
Model No.
FH210
FH211
FH212
Description
2 Drawers
4 Drawers
2 Drawers and cabinet
Wt. lbs.
55
85
93
CABINET TABLES
THREE SHELF CABINET
These sturdy combination storage cabinets and work tables provide safe
locked-in storage of valuable tools and parts, while at the same time serving as all-around work tables. Ideal for mounting vises, grinders or small
power tools. Heavy gauge steel. Cylinder lock built into handle on door for
added security. Grey baked enamel finish.
• 15 1/2" D x 21" W work surface can be mounted to form
a 2" deep tray, or reversed to provide a rimless work area
• 3 adjustable shelves
• 6.2 cu ft of storage space
• Unit is 34"H
• Weight: 46 lbs.
• Shipped knocked down
Model No. FF078
ONE SHELF CABINET
• 24" x 24" work area with 2" lip
• Unit is 34" H
• One full size centre shelf adjustable on 1 3/4" centres
• 12 cu. ft. of storage space
• Weight: 80 lbs.
• Shipped knocked down
Model No. FF075
LOCKING CABINET TABLE
•
•
•
•
36" x 24" table top offers a large work area
Unit is 34" H
2" deep lip prevents supplies from falling off
Comes with one full-size centre shelf
adjustable on 1 1/2" centres
• 18 cu.ft. of storage space
• Weight: 110 lbs.
• Shipped knocked down
Model No. FF076
FF078
FF075
FF076
19597E
B63
1257_57_65_eng
2/21/07
11:10 AM
Page B64
INDUSTRIAL WORKBENCHES
CABINET WORKBENCHES
• Versatile all-welded cabinet workbench suited
for any industrial application that requires work
surface and secure tool and part storage
• 34" high, with cabinet itself measuring 30" W x 60" L
• Tops are available in steel wood core, laminated
wood, plastic laminate or multi-laminated shop
top versions, in 30" and 36" W, by 60" or 72" L
• Options include: cyclinder locks to prevent
unauthorized access, extra drawers and shelves
• Components can be ordered individually
• Cabinet colour is Kleton blue
CABINET FORMATS (NO TOPS)
Cabinet
Format
FH393
FH165
FH394
FH395
FH396
FH397
FH398
Includes
Shell (FH165), 1 shelf (FH164), door set (FH163)
Shell only
Shell (FH165), 4 drawers (FF369)
Shell (FH165), 1 shelf (FH164)
Shell (FH165), 1 shelf (FH164), 1 Drawer (FF369)
Shell (FH165), 1 shelf (FH164), 2 Drawers (FF369)
Shell (FH165), 2 shelves (FH164)
Wt.
lbs.
160
105
145
120
130
140
135
Shown:
Model FH393 with FH183 top
Standard Formats:
FH394 w/top
FH165 w/top
FH395 w/top
FH397 w/top
FH396 w/top
FH398 w/top
ADD-ON COMPONENTS
TOPS (ADD TO CABINET TO COMPLETE UNIT)
Top
Type Material
SW Steel/Wood
LW
PL
ST
Laminated Wood
Plastic Laminate
Shop Top
Size: 30" x 60"
Model
Wt. lbs.
FD033 (grey) 88
FH183 (blue) 88
FD020
80
FD011
72
FD004
88
Size: 30" x 72"
Model
Wt. lbs.
FD034 (grey)
106
FH184 (blue)
106
FD021
126
FD012
86
FD005
105
Size: 36" x 60"
Model
Wt. lbs.
FD035 (grey) 108
FH185 (blue) 108
FD026
105
FD013
86
FD006
105
Size: 36" x 72"
Model
Wt. lbs.
FD036 (grey) 120
FH186 (blue) 120
FD027
126
FD014
126
FD007
126
Model
No.
FH476
FH163
FH164
FF369
Description
Camlock w/pair of keys
Door set, lock included
Extra shelf 27 3/4" x 58 3/4"
Extra drawer 18 1/2" x 20 1/2" x 7 1/2"
Wt.
lbs.
1
40
15
10
CABINET WORKBENCHES (COMPLETE UNIT - INCL. CABINET & TOP)
CABINET
FORMAT
FH393
FH165
FH394
FH395
FH396
FH397
FH398
B64
30 x 60
FH179
FH203
FH234
FH263
FH289
FH309
FH329
STEEL/WOOD TOP
30 x 72 36 x 60
FH180
FH181
FH204
FH205
FH235
FH236
FH264
FH265
FH290
FH291
FH310
FH311
FH330
FH331
36 x 72
FH182
FH206
FH237
FH266
FH292
FH312
FH332
LAMINATED WOOD TOP
30 x 60 30 x 72 36 x 60 36 x 72
FH166
FH167
FH168
FH169
FH188
FH189
FH190
FH191
FH218
FH219
FH220
FH221
FH238
FH239
FH240
FH241
FH272
FH273
FH274
FH275
FH293
FH294
FH295
FH296
FH313
FH314
FH315
FH316
11020E
PLASTIC LAMINATE TOP
30 x 60 30 x 72 36 x 60 36 x 72
FH170
FH171
FH172
FH173
FH192
FH193
FH194
FH195
FH222
FH223
FH224
FH225
FH242
FH243
FH244
FH245
FH276
FH277
FH278
FH279
FH297
FH298
FH299
FH300
FH317
FH318
FH319
FH320
30 x 60
FH175
FH199
FH230
FH259
FH285
FH305
FH325
SHOP TOP
30 x 72 36 x 60
FH176
FH177
FH200
FH201
FH231
FH232
FH260
FH261
FH286
FH287
FH306
FH307
FH326
FH327
36 x 72
FH178
FH202
FH233
FH262
FH288
FH308
FH328
1257_57_65_eng
2/21/07
11:10 AM
Page B65
INDUSTRIAL WORKBENCHES
EXTRA-HEAVY-DUTY WORKBENCHES
ALL WELDED BENCHES
PEDESTAL BENCHES
• Most solid workbench available
• All-welded construction features a wood-filled 3/16"
steel top with 11 gauge steel legs and stringers
• Mobile units come w/ 6" phenolic casters, 2 swivel w/ brakes, and 2 rigid
• Bolt-down footplates are standard
• Overall height is 34"
• Kleton Blue finish
• Designed for workshop applications
• Feature 1 3/4" thick solid laminated hardwood top,
mounted on all-welded pedestals with 2 shelves
• Pedestals are 18" W x 24" D x 32" H
• Overall height: 34"
• Colour: Kleton blue
3500-lb or 5000-lb
Capacity All-Welded Bench
Model
Dimensions
No.
Style
W" x
D" x
Static
72
x
30 x
FF494
FF495
Static
72
x
36 x
FH465
Mobile
72
x
30 x
FH466
Mobile
72
x
36 x
Other sizes available on request
H"
34
34
34
34
Cap.
lbs.
5000
5000
3500
3500
2500-lb
Capacity Pedestal
Bench
Model
Dimensions
No.
W"
x
D"*
x
H"
60
x
30
x
34
FF120
FF121
72
x
30
x
34
FF122
84
x
30
x
34
FF119
120
x
30
x
34
36" deep units and/or steel tops available upon request.
Wt.
lbs.
290
360
290
360
Wt.
lbs.
158
175
192
245
HEAVY-DUTY MACHINE STANDS
• Designed for use as machinery stand or
work table when full-sized workbench is
not necessary
• All-welded construction, 14 gauge steel
lip-down shelves, with bolt-down footplates on 3/16" x 1 1/2" angle leg
• Colour: Kleton blue
Model
No.
FH268
FH269
FH270
W"
30
36
48
Dimensions
x D"
x
x 18
x
x 24
x
x 24
x
FH269
Cap.
lbs.
1000
1000
1000
H"
32
32
32
Wt.
lbs.
60
70
85
1000-lb
Capacity All-Welded Stand
ECONOMY GRADE
OPEN WORKBENCHES
• Meet any strength requirement for light manufacturing,
assembly operations, maintenance service etc.
• Heavy gauge adjustable legs from 28" to 33",
front and back electrical knockouts, 12" wide lower shelf
• Choose between 1" presswood top, or plastic top (1 1/2" grey laminated
plastic surface) widely used in electronics, laboratories, and institutions
• Optional drawer, Model FH271 can be added to all models
Model
No.
FH213
FH214
FH215
FH216
FH217
FF649
FF650
FF651
FH271
Description
1" presswood top
1" presswood top
1" presswood top
1" presswood top
1" presswood top
1 1/2" plastic top
1 1/2" plastic top
1 1/2" plastic top
Optional drawer only
W"
48
60
72
60
72
48
60
72
18
Dimensions
x
x
x
x
x
x
x
x
x
x
D"
24
24
24
30
30
24
24
30
12
Wt.
lbs.
70
76
82
83
92
77
83
122
12
FH214
19596E
B65
1257_66_67_eng
2/21/07
11:23 AM
Page B66
STORAGE EQUIPMENT
STORAGEMASTER®
MECHANIC'S
CHEST
WALL CABINET
• Ideal for locking up small
parts, tools and supplies
• Holes are pre-punched in
the back (on 16" and 24" centers)
for easy mounting to walls
• A key lock in combination with
2-point latching helps prevent
unauthorized access
• 36" H x 16" D x 32" W
• Storage capacity: 10.7 cu.ft.
• Weight: 81 lbs.
Model No. TTW249
All of the same quality
features as all of our
Storagemaster® rolling
work benches but with
the following features
geared toward the
mechanic:
Mfg. No. 33
• Long lasting red baked
enamel finish
• 6" non-marking polyurethane
caster set included
• Recessed lock housing
to prevent theft
• Two-point latching on each
door for extra security
• Full length staked piano
hinges prevent thieves
from removing doors
• Heavy-duty 16 gauge
construction
WAR WAGON® ROLLING
WORK BENCH
•
•
13 sq.ft. work surface
Convenient height for attaching
vise or pipe threaders
Six doors, 3 in front, 3
in back for accessibility
One drawer and two
shelf compartments
Top and bottom panels
are 7-gauge (3⁄16") steel
•
•
•
•
•
•
•
Cabinets are 12-gauge,fully arc welded steel
62" L x 32" D x 26" H (34" H with casters)
Load Capacity: 3400 lbs.
Weight: 597 lbs.
Drawer Configuration:
2 x TTW276, 1" standard-duty drawers
1 x TTW283, 6" heavy-duty drawer
1 x TTW284, 9.5" heavy-duty drawer
Model No. TTW268 Mfg. No. 62
All these chests can
be turned into a mobile
unit with casters!
STORAGEMASTER® ROLLING
WORK BENCHES
•
Load capacity of 1000 lbs.
Drawers have a 100 lbs. load rating
Choose one of five pre-designed
models (TTW252, TTW253, TTW255,
TTW256, TTW254) or build
your own (model TTW257)
Recessed lock housing prevents theft
Model
No.
TTW257
TTW252
TTW253
TTW255
TTW256
B66
•
•
•
•
•
Designed for those
individuals who need a
strong and durable bench
with basic storage needs.
• Load capacity of 800 lbs.
• Watchman® IV Single Lock
System, one-time installation
• Recessed padlock housing
helps prevent theft
• Heavy-duty drawers are
rated for 50 lbs. and
operate on ball bearing slides
• Two 4" swivel casters and two
4" rigid casters included
• Heavy gauge construction
and tan baked on enamel finish
• Load Capacity: 800 lbs.
Load
Capacity lbs.
1125
1000
1000
1000
Wt.
lbs.
229
296
256
352
1000
343
Caution: Caster brakes are not suitable for keeping the units in place
when transporting. Secure by
another method. Do not use casters
on rough or uneven surfaces. Do
not tow caster mounted boxes.
Model No. TTW251 Mfg. No. 44
• Includes four drawers and a half
width shelf
• 25" W x 40 3/4" L x 33 1/5" H (37 1/5"
H with casters)
• Weight: 240 lbs.
ACCESSORY CASTERS
Load ratings are for all four wheels combined. Rating includes weight of Knaack®
product and its contents. Each caster set includes two rigid and two swivel casters
with mounting bolts. Caster sets with brakes have the brake unit located on the
swivel casters. Knaack® casters are recommended for use with Knaack® products.
Two-point latching on each
door provides extra security
Full length staked piano hinges
prevent thieves from removing doors
Heavy-duty 16 gauge construction
Long lasting tan baked enamel finish
46 1/4" W x 25" D x 30 3/8" H
(37 1/2" H with casters)
Mfg.
Includes
No.
Right Side
Left Side
47 Basic unit, leave as is or customize
45
2 x TTW278
2 x TTW278
48
1 x TTW279
1 x TTW279
49
3 x TTW276,
1 x TTW280
4 x TTW277,
1 x TTW279
50
2 x TTW276
2 x TTW276
2 x TTW277
2 x TTW277
Includes:
3 – 1" deep drawers,
4 – 21⁄2" deep drawers,
1 – 6" deep drawer,
1 – 1" deep shelf
Model No. TTW254 Mfg. No. 63
JOBMASTER® ROLLING
WORK
BENCHES
Model No. TTW250 Mfg. No. 40
• Includes two drawers and
a full width shelf
• 25" W x 40 3/4" L x 33 1/5" H
(37 1/5" H with casters)
• Weight: 210 lbs.
TTW278 = 4.5" deep drawers
TTW279 = 6" deep drawer
TTW276 = 1" deep drawers
TTW277 = 2.5" deep drawers
TTW280 = 1" deep shelf
•
•
•
• Includes removable
worktop mat
• 46 1/4" W x 25" D x 30 3/8" H
(37 1/2" H with casters)
• Capacity: 1000 lbs.
• Weight: 352 lbs.
Model
No.
TTW270
TTW271
TTW272
TTW273
TTW285
TTW274
Mfg.
No.
404
405
505
606
607
516
Total Load
Description
Rating lbs.
4" Set No Brakes
1060
4" Set With Brakes
1060
5" Set No Brakes
1240
6" Set No Brakes
1360
6" Set With Brakes
1360
6" Caster Set With Brakes,
2240
Non-Marking Polyurethane Wheels
TTW275 600 6" Caster Set With Brakes, Heavy-Duty 3280
Wt.
lbs.
11
12
14
15
16
18
25
All casters can be used on models TTW208,
TTW209, TTW210, TTW211, TTW219, TTW220,
TTW222, TTW214, TTW221, TTW212, TTW213.
Caster TTW272 can also be used on TTW200,
TTW201, TTW202, TTW203 & TTW204.
Casters TTW273, TTW285 and TTW275 can be used on all models.
Please note that caster should only be used with specified models only.
Caution: Caster brakes are not suitable for keeping the units in place when transporting.
Secure by another method. Do not use casters on rough or uneven surfaces. Do not tow
caster mounted boxes.
15207E
1257_66_67_eng
2/21/07
11:23 AM
Page B67
STORAGE EQUIPMENT
KNAACK® CLASSIC
STORAGE CHESTS
STORAGEMASTER® CHESTS
• Watchman IV deadbolt style Lock System (patent pending)
• Recessed lock housing eliminates the use
of bolt cutters from potential thieves
• Ergonomically designed recessed handles
• 16-gauge steel body with fully arc welded seams
• 7-gauge cover tang provides
maximum protection
A
• Wide end panels resist
distortion from pry bars
• Protected dual gas springs allows
user one-handed easy opening
• Larger shelves make it more convenient
B
to store large power tools
• Pre-punched holes make it easy to add
accessory doors, to protect valuable
tools while the chest is open
C
• 12 gauge caster-ready skids
• Baked-on enamel finish
®
Model
No.
TTW200
TTW201
TTW202
TTW203
Mfg.
No.
69
79
89
90
A"
66
78
78
78
B"
37
49
49
49
C"
30
30
30
30
D"
60
48
60
72
E"
34
46
46
46
Storage
Cap. cu.ft.
35.3
38.2
47.8
57.5
E
• One time lock install uses a
master (No. 5) or equivalent
• Recessed lock housing protects
padlock from bolt cutters
• Easy to grab recessed side lift
handles, even with a gloved hand
• Built-in tool tray for better
organization of small parts
and accessories
• 16 gauge steel construction
• 12 gauge caster ready skids
• Baked on enamel finish
A
D
B
TTW221
TTW219
No builtin tool
tray in
this unit
D
TTW202
Wt.
lbs.
282
287
337
380
TTW220
A
D
A
D
JOBMASTER® CHESTS
•
•
•
•
•
•
•
•
B
Watchman® IV deadbolt style Lock System (patent pending)
Ergonomically designed recessed handles
12-gauge caster ready skids
TTW208
16-gauge steel body with fully arc
welded seams provides extra
strength and weather protection
Reinforced 7 gauge cover tang
provides maximum protection
A
Extra wide reinforcing channel
for added strength
D
Deeper cover to allow
more closing room
Baked-on enamel finish
B
C
Model
No.
TTW208
TTW209
TTW210
TTW211
TTW212
TTW213
TTW214
Mfg.
No.
32
36
42
60
4824
4830
2472
A"
34 3/8
37 3/8
39 3/8
49 1/4
49 1/4
61 1/4
49 1/4
B"
19
19
19
24
24
30
24
C"
32
36
42
60
48
48
72
D"
13
16
18
23
23
29
23
Storage
Cap. cu.ft.
5
7
9
20.25
16
25.25
24.5
Wt.
lbs.
84
97
114
190
158
194
216
Closed
Height"
18 3/8
21 3/8
23 3/8
28 1/4
28 1/4
34 1/4
28 1/8
B
Model
No.
TTW219
TTW220
TTW221
TTW222
C
C
Mfg.
No.
2032
2048
3068
2060
A"
34 5/8
49 1/4
37
49 1/4
B"
19
24
30
24
C"
32
48
60
60
Storage
Wt.
D"
Cap. cu.ft.
13
5
23
16
22 1/2
31
23
20
Closed Price
lbs.
Height"
77
18 1/4
145
28
225
180
28
JOBMASTER® CABINETS
• Watchman® IV deadbolt style
Lock System (patent pending)
• Recessed lock housing eliminates the use of bolt cutters
from potential thieves
• Recessed handles and levers
• Convenient foot latch for
handsfree opening
PORTABLE FIELD STATION
• All lift handles and latch levers
have been recessed to protect
them during transport
• The desk top is hinged allowing for 9
cubic feet of storage space underneath
• Large swing up door on top section
features easy to use rotary latch,
easy to grip recessed handle, gas
spring to assist with opening and
closing and prop arm that locks
in place to hold door open
• Bottom section provides ample storage
space for tools and equipment
• Deep door design on lower
section doors provide additional
storage space in each door
• Entire cabinet is secured
by the watchman® IV Lock System
• 7/8" holes at the top of the
cabinet will accept 1/2" electrical
fittings for adding a power
outlet to the cabinet
• Storage capacity: 115.2 cu.ft.
• Weight: 624 lbs.
Model No. TTW245
Mfg. No. 119
C
• Adjustable/removable
bottom shelf
• 16-gauge formed steel
• Permanent and optional
shelves in door allow for
more tool organization
• Baked-on enamel finish
A
B
TTW236
D
C
TTW234
24"
13"
13"
TTW238
TTW239
Model
No.
TTW234
TTW235
TTW236
TTW237
TTW238
TTW239
15208E
Mfg.
No.
111
112
109
139
99
129
A"
57
57
57
57
57
48
B"
60
60
60
60
60
51
C"
24
30
24
30
30
24
Storage
D" Cap. cu.ft.
60
47.5
60
54.9
60
47.5
60
59.4
60
59.4
72
48
Wt.
lbs.
385
670
394
445
519
452
TTW235
B67
1257_68_74_eng
2/21/07
11:27 AM
Page B68
STEP STOOLS, STANDS & LADDERS
STEP STOOLS
STEP STOOL
• Tough one piece poly construction
with anti-skid bottom
• Threaded top and expanded step
• 16" diameter base provides
added stability
• Glides easily on
retractable rubber
casters
• 13" overall height
• Capacity: 300 lbs.
• Wt. 7 lbs.
KIK-STEP
• Extra heavy-duty steel
• Comes with a double platform
with non-slip rubber tread
• Spring-loaded casters retract
under slight pressure,
forcing base to the floor
• 11" diameter upper platform
and 13 1/2" diameter
lower platform
• 15 5/8" diameter base has an
all-around protective bumper
• 14" overall height
• Wt. 10 lbs.
• Colour: Black
Model No. OC664
Model No.
OA299
OA300
FOLDABLE
STEP-STOOL
OA300
Mfg. No.
2523BL
2523BE
Colour
Black
Beige
DIXIE STEP STOOLS
• Durable, non-corrosive, 500 lbs. capacity
polyethylene construction
• Two, three and four step models have rear
opening to access storage compartments
• Four-step model comes standard with handrails and casters
• Hand holes and lightweight combine for easy manoeuvrability
• All models include rubber feet and non skid tape surface
• Colour: Safety yellow for visibility
• Slip resistant surfaces on steps and foot pads
• Stands upright when folded and requires
minimum space for storage
• Easy to clean and resistant
to dents and rust
• Capacity: 300 lbs.
Model No. MH866
QUAD STEP
WITH CASTERS
TRIPLE STEP
Dimensions:
45” L x 25” W x 69.5” H
Weight: 53 lbs.
Model No.
MK779
Dimensions:
32” L x 22” W x 30” H
Weight: 33 lbs.
Model No.
MK778
DOUBLE STEP
SINGLE STEP
Dimensions: 18” L x 12” W x 12” H
Weight: 10 lbs.
Model No. MK776
Dimensions: 22” L x 21” W x 20” H
Weight: 22 lbs.
Model No.
MK777
STEP STANDS
•
•
•
•
•
Rugged all welded construction
Rolling stands come with spring-loaded casters
Dimensions: 16" D x 12" H
Capacity: 300 lbs.
Colour: Kleton blue
PLATFORM STANDS
ROLLING STANDS
Model No.
MH228
MH229
MH230
Model No.
MH225
MH226
MH227
Width"
20
24
32
Wt. lbs.
11
13
16
Width"
20
24
32
MH228
Wt. lbs.
17
19
22
4" ALUMINUM LIGHT
DUTY PLATFORM
LADDER
HEAVY-DUTY ALUMINUM
SAWHORSE/STEP
• Engineered to allow for convenient
mixing of sizes in plank applications
• Durable extruded aluminum steps and
side rails, serrated for strength and safety
• Trestle design allows safe access from either side
• J shaped spreaders for easy set-up and storage
• Heavy-duty rubber safety shoes
Model
No.
VC010
VC011
VC012
B68
Height’
2
3
4
Open
Height"
23
35
47.5
Base
Width"
32
33
34.5
MH225
Base
Depth"
24.5
32
34.5
Weight
lbs.
10
14
19
20341E
• 1" tubular construction makes this ladder light
weight and compact for storage
• Handrail with comfort foam grip
• Fold-down utility tray for paint, tools, etc
• Non-marring, slip resistant feet
• Overall height: - closed: 55"
- open: 51"
• Overall platform height: 22 1/2"
• Approx. weight: 8 lbs.
Model No. TJZ869
1257_68_74_eng
2/21/07
11:27 AM
Page B69
ALUMINUM LADDERS
TWO-WAY STEPLADDERS
CHOOSE THE RIGHT LADDER IN 4 EASY STEPS ...
(4600 SERIES)
1. WHAT STYLE?
Stepladder
Multi-Way
Ladder
Perfect for
projects
requiring
a smaller
reach.
Ideal for
projects
requiring
greater
height.
Can be used as a
stepladder, Trestle
ladder, Stairway
ladder or Extension
Ladder.
2. WHAT HEIGHT?
Stepladder
Max. Height You
Want to Reach*
Buy
This Size
7'
8'
9'
10'
11'
12'
14'
16'
18'
20'
22', 24'
4'
5'
6'
7'
8'
10'
12'
14'
16'
18'
20'
*Assumes a 5' 6" person with a
vertical 12" reach.
3. WHAT MATERIAL?
Extension Ladder
Height of Top
Buy
Support
This Size*
Point
9' max.
9' to 13'
13' to 17'
17' to 21'
21' to 25'
25' to 28'
28' to 31'
16'
20'
24'
28'
32'
36'
40'
*Reflects section overlap,
ladder angle.
• Strong and durable
• Safe for work with
or near electricity
• Resists corrosion
Aluminum
Model
No.
MF399
MF400
MF401
Nominal
Height'
6
8
10
Base
Width"
23
26
29
Wt.
lbs.
25
32
41
Spread"
56
73
89
INDUSTRIAL STEPLADDERS
(4400 SERIES)
CSA Certified Grade 1 - 250 lbs. Load Rating
ANSI Approved Type 1A - 300 lbs. Load Rating
• 3 1/2" serrated steps and side rails
• Solid triangular step braces
• Copolymer top and pail tray
• Rubber safety shoes
Model
No.
MA640
MA641
MA642
MA643
MA644
MA645
MA646
Fiberglass
• Lightweight
• Strong
• Resists corrosions
CSA Certified Grade 1- 250 lbs. Load Rating
ANSI Approved Type 1A - 300 lbs. Load Rating
Double-front construction allows access from either side.
Extra wide 3 1/2" serrated steps and side rails. Exclusive
solid triangular step braces provide unequalled rigidity.
Features double thick top brackets for greater stability;
"J" shape spreader arms and
heavy-duty rubber safety shoes.
Extension
Ladder
Nominal
Height'
4
6
8
10
12
14
16
Base
Width"
20
23
26
29
32
35
38
Wt.
lbs
14
20
26
33
41
51
59
Spread"
29
41
54
66
78
88
102
4. WHAT LOAD CAPACITY?
PLATFORM STEPLADDERS
Formula:
Your
Weight
+
=
Load
Capacity
Material Weight
Typically Add:
75 lbs.
50 lbs.
200 lb
CSA Grade 3
Household
225 lb
250 lb
CSA Grade 2
Tradesman and Farm
CSA Grade 1
Construction and Industrial
300 lb
Construction and Industrial meets
ANSI Type1A, Extra Heavy Duty
375 lb
Construction and Industrial meets
ANSI Type1AA, Special Duty
For Heavy
For Light
Duty Projects Duty Projects
MF440
MF434
(4500 SERIES)
CSA Certified Grade 1- 250 lbs. Load Rating
ANSI Approved Type 1A - 300 lbs. Load Rating
• Ideal for fixed height work
• Extra wide 3 1/2" serrated steps and side rails
• Exclusive solid triangular step braces provide rigidity
• Features slip resistant serrated platform 14" x 18", "J"
shape spreader arms and
heavy-duty rubber safety shoes
Model
No.
MF393
MF394
MF395
MF396
MF397
MF398
Nominal
Height'
6
8
10
12
14
16
Platform
Height"
46
69
92
115
136
158
Base
Width"
24
27
31
34
36
39
Spread"
42
54
65
78
87
102
Wt.
lbs.
22
28
35
43
52
60
MEDIUM-DUTY
ALUMINUM
STEP LADDERS
(2400 SERIES)
MF443/MF444
Model
No.
MF434
MF435
MF438
MF439
MF440
MF443
MF444
Description
Step Ladder Safety Feet - 4/kit
Step Ladder Safety Feet - 4/kit
Pail Tray
Copolymer Top
Extension and Straight Ladder Safety Feet - 2/kit
Extension Ladder End Caps - 4/kit (16' to 32')
Extension Ladder End Caps - 4/kit (36' to 60')
Applicable
Series
4400, 4500
4600
4400
4400
4100, 4200
4200
4200
CSA Certified grade 2
ANSI Approved type 2 –225 lbs. Load Rating
• Super tough moulded copolymer utility top
• Durable yet light weight extruded side rails
• 3” slip resistant serrated steps
• J-shaped spreader arms
• Heavy-duty rubber safety shoes
Model
No.
MF063
MF064
MF065
20342E
Nominal
Height’
4
6
8
Open
Height"
45
67
90
Highest
Standing Height"
24
45
67
Base
Width"
18
21
23
Base
Depth"
31
44
56
Weight
lbs.
9
13
19
B69
1257_68_74_eng
2/21/07
11:27 AM
Page B70
FIBREGLASS LADDERS
EXTRA HEAVY-DUTY
EXTRA HEAVY-DUTY
STEPLADDERS
(6900 SERIES)
CSA Certified Grade 1- 250 lbs. Load Rating
ANSI Approved Type 1A - 300 lbs. Load Rating
• Durable non-conductive C channel side
rails in high visibility safety yellow
• Slip-resistant serrated aluminum steps
• Heavy-duty rubber safety shoes
• Also comes with a tough moulded
copolymer top and J style spreader arms
Model
No.
MF606
MF607
MF608
MF609
MF610
MF611
MF612
MF613
Nominal
Height'
3
4
5
6
7
8
10
12
Base
Width"
19
20
21
23
24
25
28
31
(6400 SERIES)
CSA Certified Grade 1 - 250 lbs. Load Rating
ANSI Approved Type 1A - 300 lbs. Load Rating
• Durable non-conductive C channel side
rails in high visibility safety yellow
• Slip-resistant serrated aluminum steps
• Heavy-duty rubber safety shoes
• Also comes with a tough moulded copolymer
top and J style spreader arms
Spread"
23
28
34
39
44
50
61
74
Wt.
lbs.
12
15
18
21
24
28
35
42
Model
No.
MD487
MD488
MD489
MD490
MD491
MD492
MD493
Nominal
Height'
3
4
5
6
8
10
12
Base
Width"
17
18
20
21
23
26
28
Spread"
23
28
34
43
55
68
79
Wt.
lbs.
12
16
19
22
30
36
45
THE "BRUTE" STEPLADDERS
(6800 SERIES)
CSA Certified Grade 1- 250 lbs. Load Rating
ANSI Approved Type 1A - 300 lbs. Load Rating
• Designed for the most demanding industrial applications
• Durable non-conductive C channel side
rails in high visibility safety yellow
• Features slip-resistant serrated aluminum steps
• Tough moulded copolymer top
• Inside spreader arms, heavy-duty rubber safety shoes and
unique solid triangular step braces for extra durability
HEAVY-DUTY
FIBREGLASS
STEPLADDERS
(6300 SERIES)
CSA Certified Grade 1.
ANSI Approved Type 1 – 250 lbs. Load Rating
• Super tough moulded copolymer top
• Strong non conductive orange
C channel side rails
• Slip resistant serrated aluminum steps
• Widened flare for greater stability
• Black ABS, high impact,
non marking end caps
• Heavy-duty safety rubber shoes
Model
No.
MF561
MF562
MF563
MF564
MF565
Nominal
Height'
4
6
8
10
12
Base
Width"
18
21
23
26
28
Spread"
31
43
55
67
78
Wt.
lbs.
18
24
33
39
50
TWO-WAY STEPLADDERS
Model
No.
VC023
VC024
VC025
VC026
VC027
Max Open Highest
Height’
Length"
4
46
5
57
6
68
7
79
8
90
Standing
Height"
23
34
45
56
67
Base
Width"
20
21
23
24
25
Base
Depth"
28
34
39
44
50
Wt.
lbs.
17
18
20
23
26
MEDIUM-DUTY
FIBREGLASS
STEPLADDERS
CSA Certified Grade 2
ANSI Approved Type 2 – 225 lbs. Load Rating
• Super tough moulded copolymer top
• Durable non conductive “C" channel
side rails in high visibility safety red
• Slip resistant serrated aluminum steps
• Heavy-duty safety rubber shoes
B70
Open
Height’
4
5
6
Highest
Height"
45
57
68
Standing
Height"
23"
34"
45"
Base
Width"
18
19 1/2
30 3/4
CSA Certified Grade 1- 250 lbs. Load Rating
ANSI Approved Type 1A - 300 lbs. Load Rating
• Double front construction allows access from either side
• Durable non-conductive C channel side
rails in high visibility safety yellow
• Extra thick top brackets for greater stability
• Slip resistant serrated aluminum steps, J style
spreader arms and heavy-duty rubber safety shoe
Model
No.
MF414
MF415
MF416
(5800 SERIES)
Model
No.
VC028
VC029
VC030
(6600 SERIES)
Nominal
Height'
6
8
10
Base
Width"
21
23
29
Spread"
60
75
92
Wt.
lbs.
26
36
92
PLATFORM STEPLADDERS
(6500 SERIES)
• Ideal for all types of fixed height work
• Durable non-conductive C channel side
rails in high visibility safety yellow
• Slip resistant serrated aluminum steps and platform
• Features a platform size of 14" x 18", J style spreader arms
and heavy-duty rubber safety shoes
Base
Depth"
30
35
40
Wt.
lbs.
12
15
18
Model
No.
MF411
MF412
MF413
20343E
Nominal
Height'
6
8
10
Platform
Height"
46
68
92
Base
Width"
24
28
31
Spread"
42
54
67
Wt.
lbs.
25
33
41
1257_68_74_eng
2/21/07
11:27 AM
Page B71
EXTENSION LADDERS
SINGLE & EXTENSION LADDERS
SINGLE & EXTENSION LADDERS
(6200 SERIES)
CSA Certified Grade 1- 250 lbs. Load Rating
ANSI Approved Type 1A - 300 lbs. Load Rating
• Durable non-conductive C channel side rails in high visibility safety yellow
• Riveted rung rail design maintains continuous strength of fibres
• Mounted slide guide
• Pulley keeps rope away from climber's feet & eliminates need for cross-bar
• Features exclusive 1 piece foot assembly with spur wheel
and heavy-duty spring loaded die cast rung lock
CSA Certified Grade 1 - 250 lbs. Load Rating
ANSI Approved Type 1A - 300 lbs. Load Rating
• Superior design, strength and durability
• Features rigid box section side rails, side
mounted rope pulley and slide guide system keeps rope clear of climber's
feet, allows for effortless raising and lowering of fly section
• Comes with impact-resistant yellow
polypropylene end caps, heavy-duty zinc
die cast rung locks and cross ribbed rubber
safety shoes with ice picks
SINGLE SECTION STRAIGHT (6100 SERIES)
SINGLE LADDERS (4100 SERIES)
Model No.
Model
No.
MD506
MD507
MD508
MD509
MD510
MD511
MD512
MD513
MD514
Length'
Width"
Wt. lbs.
ROUND RUNG
MF380
MF381
MF382
MF383
MF384
8
10
12
14
16
17 3/8
17 3/8
17 3/8
17 3/8
17 3/8
18
21
24
28
32
2 SECTION EXTENSION (6200 SERIES)
Model No.
Length'
Working Length'
Width"
Wt. lbs.
16
20
22
24
28
32
13
17
19
21
25
28
17 3/8
17 3/8
17 3/8
17 3/8
17 3/8
17 3/8
38
44
48
52
59
66
16
20
22
24
28
32
36
40
13
17
19
21
25
28
32
35
17 3/8
17 3/8
17 3/8
17 3/8
17 3/8
17 3/8
19
19
38
44
48
52
59
66
96
106
ROUND RUNG
MF405
MF406
MF407
MF408
MF409
MF410
Model
Nominal
Working
No.
Length'
Length'
16
13
MA631
MA632
20
17
MA633
24
21
MA634
28
25
MA635
32
29
MA636
36
32
MA637
40
35
MA638
44
39
MA639*
60
50
*3-section extension ladder
Height’
16
20
24
Wt.
lbs.
28
35
42
47
53
68
77
91
128
CSA Certified Grade 1
ANSI Approved Type 1 – 250 lbs. Load Rating
• Heavy-duty C channel construction
• Side rails: 2 1/2" x 1" for straights up to 14'
• Side rails: 3" x 1" for straights up to 16' and up
• Heavy-duty serrated D rungs prevent slipping
for safe and sure climbing
• Black ABS, high impact, non marking end caps
• Heavy-duty safety shoes
CSA Certified Grade 1
ANSI Approved Type 1- 250 lbs. Load Rating
• Durable non conductive C channel side rails
in high visibility safety orange
• Rung through rail design
• Heavy-duty serrated D rungs prevent
slipping for safe and sure climbing
• Black ABS, high impact, non marking end caps
• Heavy-duty spring loaded rung locks
• Extra heavy-duty swivel feet with ice pick
Base section
Outside
Inside
Width’
Width"
17
14 5/8
17
14 5/8
17
14 5/8
Width"
17 1/16
17 1/16
17 1/16
17 1/16
17 1/16
18 3/8
18 3/8
18 3/8
21 3/4
(7100 SERIES)
(6300 SERIES)
Max
Open L’
13
17
21
Wt.
lbs.
13
16
19
22
25
28
31
41
44
HEAVY-DUTY ALUMINUM
STRAIGHT LADDERS
HEAVY DUTY FIBERGLASS
EXTENSION LADDERS
Model
No.
VC013
VC014
VC015
Width"
14 5/8
14 5/8
14 5/8
14 5/8
14 5/8
14 5/8
14 5/8
16
16
EXTENSION LADDERS (4200 SERIES)
D-RUNG
MF385
MF386
MF387
MF388
MF389
MF390
MF391
MF392
Nominal
Length'
8
10
12
14
16
18
20
22
24
Ply section
Outside
Width"
16 1/2
16 1/2
16 1/2
Inside
Width"
14 1/4
14 1/4
14 1/4
Model No.
VC016
VC017
VC018
VC019
VC020
VC021
VC022
Weight
Lbs.
31
36
43
REPLACEMENTPARTS/ACCESSORIES
Outside H’
8
10
12
14
16
18
20
Inside W"
16 3/4
16 3/4
16 3/4
16 3/4
16 3/4
16 3/4
16 3/4
Weight W"
14 5/8
14 5/8
14 5/8
14 5/8
14 5/8
14 5/8
14 5/8
Wt lbs
10
13
15
18
23
27
29
MF450
MF442
MF445
MF441
MF447
Model No.
MF436
MF437
MF439
MF441
MF442
MF445
MF447
MF450
Description
Applicable Series
Step Ladder Safety Feet - 4/kit
6400, 6500
Step Ladder Safety Feet - 4/kit
6600
Copolymer Top
6400, 6800, 6900
Extension and Straight Ladder Safety Feet (Standard 1 piece assembly)
6100, 6200
Extension and Straight Ladder Safety Feet (Optional duo feet) - 2/kit
6100, 6200
Extension Ladder End Caps - 4/kit
6100, 6200
Single Cable Hook
6100, 6200
Pole Strap
6200
20344E
B71
1257_68_74_eng
2/21/07
11:28 AM
Page B72
LADDERS & WORK PLATFORMS
ALUMINUM ROLLING LADDERS
LOCK-N-STOCK LADDERS
• Widely used in hospitals, banks, offices,
pharmaceutical and food processing applications
• Corrosion resistant, easy to clean and non-magnetic
• Slip-resistant steps
• 4 spring-loaded swivel casters retract under the
operators weight, rubber-tipped feet drop down
• All welded and come with
unpainted aluminum mill finish
• Structural framework is 1/2" schedule
40 high strength aluminum tubing
• 300 lbs. load rating
• Note: Manufactured with industrial
grade welds. Not for use in clean rooms
•
•
•
•
•
•
•
•
•
MA707
MA703
# of
Steps
Platform
Height"
Overall
Height"
Climb it, roll it, fold it, store it
58 degree slope, 7" deep steps for easy climbing
Perforated step
Welded construction
Easy to maneuver
Locks in the folded or climbing positions
Approximately 10” deep when folded for easy storage
Maximum capacity: 350 lbs.
Built to ANSI 14.2 standards
Base
Depth"
Model No.
20" W Base
18" W Steps
Wt.
lbs.
Model No.
30" W Base
24" W Steps
Wt.
lbs.
MA702
MA703
MA705
15
20
29
MF599
MF600
MF601
22
28
35
MA704
MA706
-
27
34
-
MF602
MF603
MA707
MA708
MA709
34
41
49
60
67
WITHOUT HANDRAILS
2
3
4
19
28 1/2
38
-
19
25
31
WITH 30" HANDRAILS
3
4
5
6
7
28 1/2
38
47 1/2
57
66 1/2
58 1/2
68
77 1/2
87
96 1/2
25
31
37
43
49
Model
No.
MH868
MH869
MH870
No. of
Steps
2
3
4
Top Step
Height"
20
30
40
Open Width"
x Length"
24
x
17
24
x
23
24
x
30
Folded
Dimensions"
10 x 24 x 41
10 x 24 x 52
10 x 24 x 65
STOP-STEP LADDERS
•
•
•
•
•
•
•
Stops still when you step on it • Gives 18" to 54" of firm footing
1" square high tensile aluminum struts, frames and braces
Heavy gauge extruded aluminum 16" x 8" cross steps with 9" raise
Long lasting 1 5/8" retractable casters allow rubber base cups to grip floor
10 year limited warranty
• Colour: Beige
Download rating: 300 lbs.
• OSHA compliant
Shipped knocked down
Model
Number
Top Step
Overall Dimensions
No.
of steps
Height"
W" x
D"
x
H"
STOP-STEP
MD623
2
18
21
x 19 3/4 x 22 3/4
MD624
3
27
21
x 26 3/4 x 31 3/4
MD625
4
36
22 3/4 x 33 1/2 x 40 3/4
STOP-STEP W/DOUBLE HANDRAIL
MD626
3
27
21
x 26 3/4 x 56 1/2
MD627
4
36
23 3/4 x 33 1/2 x 65 1/2
MD628
5
45
25 1/4 x 40 1/2 x 74 1/2
MD629
6
54
26 1/4 x 47 1/4 x 83 1/2
MD627
MD624
Wt.
lbs
16
22
34
32
39
50
64
HEAVY-DUTY & EXTRA HEAVY-DUTY
ARTICULATING LADDERS
MULTIPLE APPLICATIONS
CSA Certified Grade 1 - 250 lbs. Load Rating (MF538 and MF539)
ANSI Approved Type 1 - 250 lbs. Load Rating (MF538)
ANSI Approved Type 1A - 300 lbs. Load Rating (MF539)
• Versatile tool for wide variety of industrial/commercial jobs
• Converts easily from straight ladder to stepladder or scaffolding unit
Model
No.
MF538
MF539
B72
Straight Ladder
Length'
12
16
Stepladder
Height'
6
8
Scaffold
Height'
3
4
Wt.
lbs.
23
46
MF539
MF538
20345E
Wt.
Lbs.
30
35
42
1257_68_74_eng
2/21/07
11:28 AM
Page B73
ROLLING LADDERS
MECHANICS/MAINTENANCE
ROLLING LADDERS
• Double-straddle base puts worker in close
proximity for hard-to-reach jobs
• Tilt and roll wheelbarrow mobility allows
easy movement over rough surfaces
• Oversize 24" D x 24" W top step for easier worker movement
• Removable 10" D x 24" W tool tray fits on front or side railing
• 300 lbs. load rating
• Kleton Blue enamel finish
TILT-N-ROLL LADDERS
•
•
•
•
•
Balanced design allows ladder to tilt into the rolling position
Ladder moves easily two 4" casters
One piece all welded steel construction
Legs have reinforced rubber tips that hold ladder secure during use
Oversize 24" W x 24" D top step allows worker
more freedom/movement and comfort
• 30" high rails with 24" wide expanded metal steps
• 300 lbs load rating
• Kleton Blue enamel finish
Model
No.
MD603
MD604
MD605
MD606
MH242
Number
of Steps
3
4
5
6
Platform
OA
Base
Height"
Height"
W" x D"
27
57
25 x 44
38
68
25 x 50
47
77
25 x 56
56
86
25 x 62
Optional tool tray
Wt.
lbs.
70
81
93
105
9
Tool Tray
ROLLING STEP STANDS
Model
No.
MH212
MH213
MH214
MH215
Number
of Steps
3
4
5
6
Platform
Height"
28 1/2
38
47 1/2
57
Overall
Height"
58 1/2
68
77 1/2
87
Base
W" x D"
25 x 44
25 x 50
25 x 56
25 x 62
Wt.
lbs.
85
98
112
125
ROLLING SAFETY LADDERS
•
•
•
•
•
For use in record storage rooms, offices and warehouses
Rolls into position and locks firms to the floor
Casters retract under operator's weight
Rubber tipped feet drop down
Capacity: 300 lbs
Model
No.
XX001
XX002
Number
of Steps
3
4
Platform
Height"
28
37
MA613
Base
W" x D"
20 x 30
20 x 41
Wt.
lbs.
40
46
MA622
CWB
CERTIFÉE
Certified as
per ANSI A14.7
Note:
Ladders are not
to be used as
work platforms.
MA624
MA617
• Ideal wherever there is a need
to reach bulky materials
• Roll easily into position and lock firmly
to the floor for maximum safety
• 2 to 6 step ladders operate
on spring-loaded casters
• Casters retract under operator's
weight, rubber feet drop down
• First step on all 8 to 16 step ladders activates
the floor locking mechanism (step off and kick
release to make the ladder mobile)
• Non-clogging slip-resistant steel steps
• Frame is rugged welded 1" round steel tubing
• 8 to 16 step ladders shipped
knocked down, easily assembled
MA615
Number
of Steps
Model
No.
Platform
Height"
Overall
Height"
Platform
Size"
W"
Base
x D"
Wt.
lbs.
19
28
37
46
19
28
37
46
22 x 16
22 x 16
22 x 16
22 x 16
24
24
24
24
x
x
x
x
26
30
37
41
32
42
52
61
37
46
55
72
89
109
128
144
78
87
95
113
130
149
167
185
22 x 16
22 x 16
22 x 16
30 x 16
30 x 16
30 x 16
30 x 16
30 x 16
30
30
30
38
38
38
38
38
x
x
x
x
x
x
x
x
36
46
51
60
72
80
93
104
78
89
100
180
230
250
275
305
WITHOUT HANDRAILS
2
3
4
5
MA612
MA613
MH279
MA615
WITH HANDRAILS
4
MA614*
5
MA616*
6
MA617*
8
MA622
10
MA623
12
MA624
14
MA625
16
MA626
* Only front casters are spring loaded.
11040E
B73
1257_68_74_eng
2/21/07
11:28 AM
Page B74
WORK PLATFORMS & SCAFFOLDING
EMERGENCY STOP
SWITCH
HIGH WORK MAINTENANCE PLATFORMS
• Convert forklift truck into safe, efficient work platform
• Take care of overhead maintenance problems
without setting up ladders or scaffolds
• Non-skid platform
• 72" safety mesh backscreen keeps operator
and equipment away from lift mechanism
• Forks slip easily into pockets
then attach safety chains
• Load capacity: 600 lbs
• No assembly required
MD444
• Safety kill switch for person on work platform
• Will cut power to forklift in case of an emergency
• Consists of control box for platform, plug-in box (to
be
installed on forklift), and wire that extends 6' to 20'
• Switch is easy to install
• Recommended for maintenance platform
model MD444 and MH800
NOTE:
MD328
Kleton Maintenance Platforms meet
or exceed ASME B56.1 safety
standard when a safety harness
and lanyard are worn.
Model No.
MD444
MH800
MD338
MD948*
MD948
Description
High Work Platform - 36" x 36" platform
High Work Platform - 48" x 48" platform
Optional 6" caster kit
Light Bulb Caddy 15" W x 15" D x 43" H
Wt. lbs.
230
300
10
25
OPTIONAL TOOL TRAYS
MI787
36" L x 4" W x 3" D, Fits on model MD444
MI788
48" L x 4" W x 3" D, Fits on MH800
* Mounts on Models MD444 and MH800.
MI787
Model No.
MD328
SN065
SN067
SN069
Description
Emergency Stop Switch
Harness w/Buckles, Side D-Ring
Harness w/Grommet, Side D-Ring
6' Built-in core shock-absorber, One leg
MOVABLE SCAFFOLDING
A. ROLLING SCAFFOLD
C. MAXI-FOLD SCAFFOLD
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Adjustable every 4" with maximum platform height of 6'
Allows workers to safely reach variety of heights
Compact - can pass through standard doorways and down narrow aisles
5" swivel casters with brakes
Overall dimensions: 6' W x 28" D x 6' H
700 lbs. static capacity
Shipped knocked down
Foldable scaffold has platform thay adjusts on 4" increments
One piece frame assembly, three 8 1/8" x 75" steel platforms and four 5" casters with brakes
Overall dimensions: 75 1/2" W x 29" D x 78" H
Vertical extensions available
Frame is painted using a polyester powder coating
700 lbs. static capacity
Shipped knocked down
C.
B. MINI-MOBILE SCAFFOLD
•
•
•
•
•
•
•
•
•
Sturdy, lightweight, easy to assemble and take down, compact for storage
Adjustable platform height up to 4'
Steel frame: two 9 5/8" x 45" steel platforms
Frame is painted w/ polyester powder coating
4" swivel casters with brakes
Comes with utility shelf: 23 1/2" x 8 1/2", 3/4" lip and holes for tools
Overall dimensions: 45 1/2" W x 22" D x 50" H
500 lbs. static capacity
Shipped knocked down
A.
B.
C.
Model No.
MB035
MB090
MB086
MB087
MB088
Description
Rolling Scaffold
Mini-Mobile
Maxi-Fold
3' Vertical Extension
6' Vertical Extension
A.
B.
Wt. lbs.
150
51
129
40
49
FORTRUSS® STEEL ROLLING TOWER SCAFFOLD
- full height unit 29" W x 68" H (w/o casters)
- half unit 29" W x 39" H (w/o casters)
Width (assembled)
- 29 1/2" (w/o casters)
Platform height max. (w/casters)
- 6' unit: 6' 3"
- 12' unit: 11' 8"
- 15' unit: 14' 10"
Load capacity
- 6' L unit: 655 lbs. (50 lbs./sq. ft.)
- 8' L unit: 450 lbs. (25 lbs./sq. ft.)
Please Note: Do not stack higher than 3 units totalling 15'.
Each set of end frames requires one pair of trusses
and platform (incl. w/shipment).
Outrigger kit and guard-rail/toeboard kit shipped with unit
when platform is more than 10' above floor surface.
End frames
• Pistol grip for easy one-man height adjustment
• Caster stem snaps into frame securely with no chance of caster drop-out
• Expanded end frame tube ends with locking tab making
it easy to lock stacked sections or casters into place
• Tightening 'L' knob for better connection between
truss and end frame increases stability
• Dual-lock casters are 5" x 1 3/8"
• Rectangular steel tubing end frame with round rungs
• Exterior grade plywood platform: 5/8" thick x 29" W x 65 3/8"L or 89 3/8"L
Model
No.
MF424
MF425
MF426
MF427
MF428
MF429
MF430
MF431
B74
Size
L' x H'
6 x 3
8 x 3
6 x 6
8 x 6
6 x 12
8 x 12
6 x 15
8 x 15
End
Frames
2 x 3'
2 x 3'
2 x 6'
2 x 6'
4 x 6'
4 x 8'
4 x 6', 2 x 3'
4 x 6', 2 x 3'
Truss
Assembly
2 x 6'
2 x 8'
2 x 6'
2 x 8'
4 x 6'
4 x 8'
6 x 6'
6 x 8'
No. Plywood
Platform(s)
1
1
1
1
2
2
3
3
No. of
Casters
4
4
8
8
8
8
(SS SERIES)
SPECIFICATIONS:
The scaffolds include guard-rail system which are easily assembled or adjusted
by just one person. Fortruss® may be stacked, utilizing up to 3 units to a maximum
of 15'. Outriggers are required when stacking over 6'.
Wt.
lbs.
112
127
154
171
418
463
530
590
20346E
MF426