ruger-catalogue-2015

Transcription

2015 International Reference Guide
Arms Makers for Responsible Citizens ®
1
2
Table
of Contents
10/22 ® Autoloading Rifle
10/22 Takedown ® Autoloading Rifle
3-7
9-10
New Product Quick Reference:
Ruger American Rifle ® Predator
17
Ruger American Rifle ® Ranch
18
Ruger American Rifle ®13-18
Ruger American Rifle ® Left-Handed
18
Ruger American Rimfire ®19-22
Ruger American Rimfire ® with Threaded Barrel
21
Ruger American Rimfire ® Compact with Threaded Barrel
22
Gunsite Scout Rifle in 5.56 NATO
25
Gunsite Scout Rifle with Composite Stock
25
Hawkeye ® FTW Predator
35
SR-22 Autoloading Rifle
®
11-12
About the Web: Visit Ruger.com Today
23-24
Gunsite Scout Rifle
25-26
Guide Gun
27-28
Hawkeye ® African Bolt-Action Rifle
29-30
Hawkeye ® Bolt-Action Rifle
31-35
Left-Handed Rifles:
Rotary Magazine Bolt-Action Rifles
37-42
Ruger American Rifle ® (Seven Models)
18
Scope Rings
43-44
Gunsite Scout Rifle (Four Models)
25
Guide Gun (One Model)
27
Hawkeye ® African Bolt-Action Rifle (One Model)
29
Magazines45
Legal Information
46
Reprinted by Viking Arms with Permission from Sturm, Ruger & Co., Inc.
L e a r n M o r e A b o u t R u g e r® P r o d u c t s O n l i n e :
RUGER.COM
facebook.com/Ruger
R u g e r.c o m
youtube.com/RugerFirearms
pinterest.com/RugerFirearms
4
3
THE
R U G E R®
Features
1 0 / 2 2®
10/22 ® Carbine
(Model 1103)
10/22 ® Carbine with
Clear Satin Finish
(Model 1256)
Patented, detachable 10-round rotary magazine features a unique rotor
to separate cartridges and provide reliable feeding.
Legendary action, a tried and true Ruger design, ensures consistent,
reliable performance.
Easy-to-use extended magazine release provides smooth, no-fuss removal of
flush-mounted magazine.
The Ruger ® 10/22 ® is America’s favorite .22 LR rifle, with proven
performance in a wide range of styles for every rimfire application. Ideally suited
for informal target shooting, plinking, small game hunting and action-shooting
events, Ruger has sold millions of 10/22 ® rifles since their introduction in 1964.
Patented, Detachable
10-Round Rotary Magazine
Easy-to-Use Extended Magazine Release
Positive, push-button, cross-bolt manual safety.
Combination scope base adapter for both Weaver ®-style and .22 tip-off
scope mounts included.
Cold hammer-forged barrel is locked into the receiver by a unique, two-screw,
V-block system.
Heat-stabilised, glass-filled, polymer trigger housing assembly is precision made
of high-tech material for improved manufacturing tolerances, impact and abrasionresistance and an unmatched ability to withstand the elements.
Combination Scope Base Adapter Included
R U G E R . C O M /10 / 2 2
Positive, Push-Button, Cross-Bolt Manual Safety
5
6
THE
R U G E R®
1 0 / 2 2®
1 0 /2 2 ® C A RBIN E W I TH BL A CK S Y N TH E TIC S TO CK
1 0 / 2 2 ® C AR BINE
BIN E
Model 1151 Shown
Gold Bead
Front Sight
Model
Number
1103
Calibre
Capacity
22 LR
10
Material/
Finish
Alloy Steel/
Satin Black
Stock
Sights
Hardwood
Gold Bead Front,
Adjustable Rear
Adjustable, Folding
Rear Sight
Barrel
Length
18.50''
Contoured Buttplate
on Hardwood Stock
Overall
Length
37.00''
Weight
Length
of Pull
13.50''
5.00 lbs.
Twist
1:16''
Gold Bead
Front Sight
Calibre
Capacity
22 LR
10
Material/
Finish
Alloy Steel/
Satin Black
Stock
Sights
American
Walnut
Gold Bead Front,
Adjustable Rear
Barrel
Length
18.50''
Fibre Optic Front Sight
Calibre
Capacity
22 LR
10
Contoured Buttplate on
Black Synthetic Stock
Barrel Band
COMPARE
Model
Number
1151
Calibre
Capacity
22 LR
10
1256
22 LR
10
Material/
Finish
Alloy Steel/
Satin Black
Stock
Sights
Black
Synthetic
Gold Bead Front,
Adjustable Rear
Stainless Steel/
Clear Satin
Black
Synthetic
Gold Bead Front,
Adjustable Rear
Adjustable, Folding
Rear Sight
Overall
Length
37.00''
Sling Swivels and Flat
Buttplate with Rubber Buttpad
on American Walnut Stock
Barrel
Length
18.50''
Overall
Length
37.00''
18.50''
37.00''
Weight
5.75 lbs.
Length
of Pull
13.88''
Twist
1:16''
Threaded Barrel with 1/2"-28 Thread Pattern
Capped with Ruger® Flash Suppressor*
Model
Number
1261
Calibre
Capacity
22 LR
10
Material/
Finish
Alloy Steel/
Satin Black
1 0 / 2 2 ® C OM PACT
Model
Number
1168
Adjustable, Folding
Rear Sight
Weight
5.00 lbs.
Length
of Pull
13.50''
Twist
1:16''
5.00 lbs.
13.50''
1:16''
1 0 /2 2 ® TACTIC AL W I TH F L AS H S U P P RE S S OR
1 0 /2 2 ® S PORTER
Model
Number
1102
Gold Bead
Front Sight
Barrel Band
Material/
Finish
Alloy Steel/
Satin Black
Stock
Sights
Hardwood
Fibre Optic Front,
Adjustable Rear
Barrel
Length
16.12''
Fibre Optic Adjustable
Rear Sight
Overall
Length
34.00''
Weight
4.50 lbs.
Rubber Buttpad on
Hardwood Stock
Length
of Pull
12.75''
Twist
1:16''
R U G E R.C O M / 1 0 / 2 2
Stock
Sights
Black Synthetic
None
Barrel
Length
16.12''
Contoured Buttplate on
Overall
Length
36.25''
Weight
4.30 lbs.
Barrel Band
Length
of Pull
13.50''
Twist
1:16''
7
THE
R U G E R®
1 0 / 2 2®
FITS
ANY
RUGER
®
10/22
®
OR
22
CHARGER
™
PISTOL
1 0 /2 2 ® TACTIC AL WITH TARGE T TR IGGE R , H EAV Y CON TO U R B AR R E L AN D BI POD
Target Trigger
Model
Number
1230
Calibre
Capacity
22 LR
10
Material/
Finish
Alloy Steel/
Satin Black
Stock
Sights
Black Hogue ®
OverMolded®
None
Precision-Adjustable
Bipod
Rubber Buttpad on
Black Hogue®
OverMolded® Stock
Barrel
Length
16.12''
Overall
Length
34.50''
Weight
6.88 lbs.
Heavy, Cold Hammer-Forged
Barrel with Recessed Target
Crown and Spiral Design
Length
of Pull
13.75''
Twist
BX-TRIGGER
™
1:16''
Rugged, reliable and safe (meets or exceeds industry
standards for drop testing), this new and improved
Genuine Ruger ® Factory Accessory comes in a
1 0 / 2 2 ® TARGET WIT H TARGE T TR IGGE R AND H EAV Y CON TO U R B AR R E L
completely self-contained module and is easy to install.
Do not dry fire unless the hammer block is installed or trigger is installed in a Ruger ®
10/22 ® rifle. See instructions or visit Ruger.com/BX-Trigger
Model
Number
1121
Calibre
Capacity
22 LR
10
Material/
Finish
Alloy Steel/
Satin Black
Stock
Sights
Brown
Laminate
None
Flat Buttplate with Rubber
Buttpad and Sling Swivels
on Brown Laminate Stock
Barrel
Length
20.00''
Overall
Length
38.50''
Weight
7.50 lbs.
Length
of Pull
13.75''
TRIGGER PULL
Twist
6
1:16''
FORCE (LB.)
Target Trigger
1 0 / 2 2 ® TARGET WIT H TARGE T TR IGGE R AND H EAV Y CON TO U R B AR R E L
STANDARD
10/22® TRIGGER
4
NEW
BX-TRIGGER™
2
0
0
0.025
0.050
0.075
DISTANCE (IN.)
Target Trigger
Model
Number
1262
Calibre
Capacity
22 LR
10
Material/
Finish
Stainless Steel/
Clear Satin
Stock
Sights
Black
Laminate
None
Barrel
Length
20.00
Flat Buttplate with Rubber
Buttpad and Sling Swivels on
Black Laminate Stock
Overall
Length
38.50''
Weight
7.50 lbs.
A light, crisp 2.5-3.0 lb. trigger pull weight
with minimal overtravel and a positive reset.
Length
of Pull
13.75''
Twist
1:16''
R U G E R.C O M / 1 0 / 2 2
RUGER.COM/BX-TRIGGER
©2014 Sturm, Ruger & Co., Inc. 121014
0.100
10
9
THE
R U G E R®
Features
1 0 / 2 2 T A K E D O W N®
20''
10/22 Takedown ®
(Model 11100)
10/22 Takedown ®
with Flash Suppressor **
(Model 11112)
18.5''
Easy takedown enables quick separation of the barrel/forend from the action/buttstock for ease of
transportation and storage*. Takedown is as simple as locking the bolt back and verifying that the rifle
is unloaded, pushing a recessed lever, twisting the subassemblies and pulling them apart.
Simple reassembly allows for a secure connection of the barrel and action and returns the firearm to
zero, even when receiver-mounted optics are used, ensuring consistent accuracy, shot after shot.
The Ruger ® 10/22 Takedown ® combines all of the features and
functionality of the 10/22 ® rifle with the ability to easily separate the barrel/forend and action/buttstock for
Patented, detachable 10-round rotary magazine features a unique rotor to separate cartridges
and provide reliable feeding.
Legendary action, a tried and true Ruger ® design, ensures consistent, reliable performance.
convenient storage and transportation. The simple reassembly of the barrel and action yields a rock-solid
Ultra lightweight, the assembled rifle weighs just 4.67 pounds.
return to zero for consistent, reliable performance. Packed in a rugged, ballistic nylon case (included), the
Easy-to-use extended magazine release provides smooth, no-fuss removal of flush-mounted magazine.
Ruger ® 10/22 Takedown ® makes it easy to keep America’s favorite rimfire rifle by your side.
Positive, push-button, cross-bolt manual safety.
Combination scope base adapter for both Weaver ®-style and .22 tip-off scope mounts included.
1 0 / 2 2 TAK EDO WN®
COMPARE
Model
Number
11100
Material/
Finish
Stainless
Steel/Clear
Matte
Calibre
Capacity
Stock
Sights
Barrel
22 LR
10
Black
Synthetic
Gold Bead Front,
Adjustable Rear
Stainless Steel
11112
Alloy Steel/
Satin Black
22 LR
10
Black
Synthetic
Gold Bead Front,
Adjustable Rear
Alloy Steel,
Threaded with
Flash Suppressor
Barrel
Length
18.50''
Overall
Length*
37.00''
Weight
Twist
4.67 lbs.
Length
of Pull
13.50''
16.62''
36.75''
4.67 lbs.
13.50''
1:16''
1:16''
Heat-stabilised, glass-filled, polymer trigger housing assembly is precision-made of high-tech material
for improved manufacturing tolerances, impact and abrasion-resistance and unmatched ability to
withstand the elements.
Precision-rifled, cold hammer-forged barrel (capped with a Ruger ® flash suppressor** mounted
with a 1/2''-28 thread on model 11112).
Rugged, weather-resistant stainless steel barrel and composite stock.
Also Includes: backpack-style bag, which provides ample storage with extra pockets and
magazine pouches.
* When separated, the length of the barrel and forend portion of the rifle is 18.5'' and the length of the action and buttstock portion is 20''.
Barrel and Action are Easily Separated and
Reassembled for Ease of Transportation and Storage*
Patented, Detachable 10-Round Rotary Magazine
Recessed Locking Lever
Packed in a Rugged,
Ballistic Nylon Case
Threaded Barrel Model (11112) Includes SR-556®/
Mini-14®-Style Flash Suppressor**
R U G E R . C O M /1 0 2 2 T A K E D O W N
12
11
THE
Features
R U G E R® S R - 2 2® R I F L E
SR-22 ® Rifle (Model 11134)
Legendary 10/22 ® action, a tried and true Ruger® design, ensures consistent,
reliable performance.
Patented 10/22 ®, detachable 10-round rotary magazine features a unique rotor to
separate cartridges and provide reliable feeding.
Fires the inexpensive .22 LR allowing shooters to shoot, train or just have fun.
The Ruger SR-22 Rifle is an autoloading rimfire rifle that
combines the legendary reliability of the Ruger 10/22 with
the ergonomics and configurability of the Ruger SR-556.
®
®
AR-style ergonomics with industry leading Hogue ® Monogrip ® and six-position, telescoping
buttstock* on a Mil-Spec diameter tube.
®
®
Picatinny rail optic mount allows a variety of sight or scope options.
Ruger ® Rapid Deploy Sights provide a windage adjustable rear sight and an elevation
adjustable front sight. These lightweight sights can be folded to make room for optics,
but can be instantly redeployed as needed.
®
®
Round, mid-length handguard is mounted on a standard-thread AR-style barrel nut.
S R - 2 2 ® R IFLE
COMPARE
Model
Number
11134
Calibre
Capacity
Finish
Stock
Barrel
Barrel Length
22 LR
10
Matte Black
Black
Synthetic,
Collapsible
Flash
Suppressor
16.12''
1236
22 LR
10
Matte Black
Black
Synthetic,
Fixed
Target Crown
16.12''
Picatinny Rail Optic Mount
AR-Style Ergonomics
Overall
Length
33.00''36.00''
Height
Width
Weight
7.00''
2.00''
6.90 lbs.
34.38''
7.00''
2.00''
6.50 lbs.
Length
of Pull
10.00''13.00''
Twist
13.00''
1:16''
1:16''
Rapid Deploy Sights
Barrel support block, installed in the handguard, ensures accuracy and allows the
standard 10/22 ® V-block barrel attachment system to be used.
Precision-rifled, cold hammer-forged barrel at 16-1/8'' and forged of alloy steel, is
capped with a Ruger ® flash suppressor* mounted with a 1/2''-28 thread.
1:16 twist rate to best stabilise most standard and high velocity .22 LR ammunition.
Model 1236 has a fixed stock and a target crown barrel and lacks a flash suppressor
to meet regulatory requirements in some states.
Round, Mid-Length Handguard
Patented, Detachable 10-Round Rotary Magazine
R U G E R . C O M /S R 2 2 R I F L E
14
13
THE RUGER AMERICAN
Features
R I F L E®
Ruger American Rifle ® with
Redfield ® Revolution ™ Riflescope
(Model 6951)
Ruger American Rifle ®
Ranch (Model 6968)
Ruger Marksman Adjustable ™ trigger offers a crisp release with a pull weight that is user adjustable
between 3 and 5 pounds, allowing shooters to make that perfect shot.
Ergonomic, lightweight composite stock (designed for quick, easy handling) blends a classic look
with modern forend contouring and grip serrations.
Soft rubber buttpad is crafted for maximum recoil reduction.
The one-piece, three-lug bolt with 70° throw provides ample scope clearance, and utilises a full
diameter bolt body and dual cocking cams for smooth, easy cycling from the shoulder.
Patent-pending Power Bedding ®, integral bedding block system positively locates the
receiver and free-floats the barrel for outstanding accuracy.
The 100% American-made Ruger American Rifle is another
engineering innovation from America’s leading firearms manufacturer.
The Ruger American Rifle combines the rugged reliability of Ruger ’s past with
the award-winning ingenuity featured in so many of Ruger’s new products.
®
®
Power Bedding® Integral Bedding Blocks for
Outstanding Accuracy
Ruger Marksman Adjustable™ Trigger Provides a Crisp
Release with a User-Adjustable 3-5 lb. Trigger Pull
Visible, Accessible and
Easy-to-Actuate Tang Safety
Offers minute-of-angle accuracy that can make every hunt a success.
Cold hammer-forged barrel results in ultra-precise rifling that provides exceptional accuracy,
longevity and easy cleaning.
Features a visible, accessible and easy-to-actuate tang safety that provides instant security.
Offers a reliable rotary magazine that fits flush with the stock and offers the smooth feed
that has become the hallmark of Ruger ® rotary magazines.
Also Includes: magazine; sling swivel studs.
Flush-Fit Rotary Magazine
One-Piece, Three-Lug Bolt with 70˚ Throw Provides Ample Scope Clearance
R U G E R . C O M /A M E R I C A N R I F L E
15
16
THE RUGER AMERICAN
R I F L E®
RU G E R A MER IC A N RIF LE ®
RU GE R A M E RIC AN R IFL E ® C OM PACT
Model 6908 Shown
Model 6901 Shown
Receiver is Drilled and Tapped for
Mounting Included Scope Bases
Compact models feature a shorter length of pull (for smaller shooters
or those wearing heavier outerwear) and a shorter barrel, for a
reduction in overall length of more than five inches.
Matte Black, Hammer-Forged
22.00'' Barrel
Matte Black, Hammer-Forged
18.00'' Barrel
COMPARE
Model
Number
6905
Calibre
Capacity
Material/Finish
Stock
Sights
None
Barrel
Length
22.00''
Overall
Length
42.00''
22-250 Rem
4
Alloy Steel/
Matte Black
Black Composite
6913
223 Rem
5
Alloy Steel/
Matte Black
Black Composite
None
22.00''
6904
243 Win
4
Alloy Steel/
Matte Black
Black Composite
None
6902
270 Win
4
Alloy Steel/
Matte Black
Black Composite
6906
7mm-08 Rem
4
Alloy Steel/
Matte Black
6901
30-06 Sprg
4
6903
308 Win
4
Weight
Twist
6.38 lbs.
Length
of Pull
13.75''
42.00''
6.38 lbs.
13.75''
1:8''
22.00''
42.00''
6.25 lbs.
13.75''
1:9''
None
22.00''
42.50''
6.25 lbs.
13.75''
1:10''
Black Composite
None
22.00''
42.00''
6.38 lbs.
13.75''
1:9.5''
Alloy Steel/
Matte Black
Black Composite
None
22.00''
42.50''
6.25 lbs.
13.75''
1:10''
Alloy Steel/
Matte Black
Black Composite
None
22.00''
42.00''
6.12 lbs.
13.75''
1:10''
1:10''
RU G E R A M
MER
E R IC A
AN
N RIF
RIFLE
LE ® ALL
A LL-WE
WE AT
ATHER®
HER
COMPARE
Model
Number
6946
Calibre
Capacity
Material/Finish
Stock
Sights
Overall
Length
36.75''
Weight
None
Barrel
Length
18.00''
Twist
6.00 lbs.
Length
of Pull
12.50''
22-250 Rem
4
Alloy Steel/
Matte Black
Black Composite
6914
223 Rem
5
Alloy Steel/
Matte Black
Black Composite
None
18.00''
36.75''
6.00 lbs.
12.50''
1:8''
6908
243 Win
4
Alloy Steel/
Matte Black
Black Composite
None
18.00''
36.75''
6.00 lbs.
12.50''
1:9''
6909
7mm-08 Rem
4
Alloy Steel/
Matte Black
Black Composite
None
18.00''
36.75''
6.00 lbs.
12.50''
1:9.5''
6907
308 Win
4
Alloy Steel/
Matte Black
Black Composite
None
18.00''
36.75''
6.00 lbs.
12.50''
1:10''
1:10''
RU GE R A M E RIC AN R IFL E ® ALL- WE ATH E R® C OM PACT
Model 6937 Shown
Model 6922 Shown
Compact models feature a shorter length of pull (for smaller shooters
or those wearing heavier outerwear) and a shorter barrel, for a
reduction in overall length of more than five inches.
Matte Stainless, Hammer-Forged
22.00'' Barrel
Matte Stainless, Hammer-Forged
18.00'' Barrel
COMPARE
Model
Number
6926
Calibre
Capacity
Material/Finish
Stock
Sights
Overall
Length
42.00''
Weight
None
Barrel
Length
22.00''
Twist
6.38 lbs.
Length
of Pull
13.75''
22-250 Rem
4
Stainless Steel/
Matte Black
Black Composite
6928
223 Rem
5
Stainless Steel/
Matte Black
Black Composite
None
22.00''
42.00''
6.38 lbs.
13.75''
1:8''
6925
243 Win
4
Stainless Steel/
Matte Black
Black Composite
None
22.00''
42.00''
6.25 lbs.
13.75''
1:9''
6923
270 Win
4
Stainless Steel/
Matte Black
Black Composite
None
22.00''
42.50''
6.25 lbs.
13.75''
1:10''
6927
7mm-08 Rem
4
Stainless Steel/
Matte Black
Black Composite
None
22.00''
42.00''
6.38 lbs.
13.75''
1:9.5''
6922
30-06 Sprg
4
Stainless Steel/
Matte Black
Black Composite
None
22.00''
42.50''
6.25 lbs.
13.75''
1:10''
6924
308 Win
4
Stainless Steel/
Matte Black
Black Composite
None
22.00''
42.00''
6.12 lbs.
13.75''
1:10''
1:10''
COMPARE
Model
Number
6947
Calibre
Capacity
Material/Finish
Stock
Sights
Overall
Length
36.75''
Weight
None
Barrel
Length
18.00''
Twist
6.00 lbs.
Length
of Pull
12.50''
22-250 Rem
4
Stainless Steel/
Matte Black
Black Composite
6939
223 Rem
5
Stainless Steel/
Matte Black
Black Composite
None
18.00''
36.75''
6.00 lbs.
12.50''
1:8''
6937
243 Win
4
Stainless Steel/
Matte Black
Black Composite
None
18.00''
36.75''
6.00 lbs.
12.50''
1:9''
6938
7mm-08 Rem
4
Stainless Steel/
Matte Black
Black Composite
None
18.00''
36.75''
6.00 lbs.
12.50''
1:9.5''
6936
308 Win
4
Stainless Steel/
Matte Black
Black Composite
None
18.00''
36.75''
6.00 lbs.
12.50''
1:10''
1:10''
17
18
THE RUGER AMERICAN
R I F L E®
RU G ER A MER IC A N RIF LE ® PRE DATOR
RUGE
RIC
E ® R ANC H
RU GE R A M E
ER
IC AN R IFL
IFLE
Model 6944 Shown
Model 6968 Shown
Factory Installed One-Piece
Aluminium Scope Rail
Factory Installed One-Piece
Aluminium Scope Rail
COMPARE
Model
Number
6971
Calibre
Capacity
Material/Finish
Stock
Sights
None
Barrel
Length
22.00''
Overall
Length
42.00''
204 Ruger
5
Alloy Steel/
Matte Black
Moss Green Composite
6945
22-250 Rem
4
Alloy Steel/
Matte Black
None
22.00''
6944
223 Rem
5
Alloy Steel/
Matte Black
None
6972
243 Win
4
Alloy Steel/
Matte Black
6973
6.5 Creedmoor
4
Alloy Steel/
Matte Black
6974
308 Win
4
Alloy Steel/
Matte Black
Weight
Twist
6.62 lbs.
Length
of Pull
13.75''
42.00''
6.62 lbs.
13.75''
22.00''
42.00''
6.62 lbs.
None
22.00''
42.00''
None
22.00''
None
18.00''
1:12''
COMPARE
Calibre
Capacity
Material/Finish
Stock
Sights
1:10''
Model
Number
6965
None
Overall
Length
36.00"
Thread
Pattern
1/2"-28
5.56 NATO
5
Alloy Steel/
Matte Black
Flat Dark Earth Composite
13.75''
1:8''
6967
5.56 NATO
5
Alloy Steel/
Matte Black
None
34.75"
6.62 lbs.
13.75''
1:9''
6968
300 BLK
5
Alloy Steel/
Matte Black
None
42.00''
6.62 lbs.
13.75''
1:8''
6970
300 BLK
5
Alloy Steel/
Matte Black
38.00''
6.25 lbs.
13.75''
1:10''
Weight
Twist
6.10 lbs.
Length
of Pull
13.75"
1/2"-28
6.05 lbs.
12.50"
1:8" RH
36.00"
5/8"-24
5.95 lbs.
13.75"
1:7" RH
None
34.75"
5/8"-24
5.90 lbs.
12.50"
1:7" RH
Overall
Length
42.00"
Weight
Twist
6.38 lbs.
Length
of Pull
13.75''
1:8" RH
RUGE R A M E RIC AN R IFL E ® LE FT- H AN DE D
RU G ER A MER IC A N RIF LE ® WITH RE DF IE LD ® RE V OLU T ION ™ R IF LES C OP E
Model 6951 Shown
Model 6917 Shown
TM
100% American-Made Redfield Revolution
3-9x40mm Riflescope
®
™
COMPARE
S P E C I F IC AT ION S :
Reticle: 4-Plex ™ Reticle
Item Number & Finish: #67090 (Matte)
Lens Coating: Vapor Deposited, Multi-Coated
Illuminator Lens System
Adjustment Markings: Accu-Trac ™ 1/4 MOA
Finger Click Adjustments
Actual Magnification: 3.3 - 8.5
Linear Field of View (ft @ 100yd): 32.9 - 13.1
Maintube Diameter: 1''
Linear Field of View (m @ 100m): 11.0 - 4.4
Environmental Protection: Nitrogen Filled
Model
Number
6919
Calibre
Capacity
Finish
Stock
Sights
22-250 Rem
4
Alloy Steel/
Matte Black
Black Composite
None
Barrel
Length
22.00"
6921
223 Rem
5
Alloy Steel/
Matte Black
Black Composite
None
22.00"
42.00"
6.38 lbs.
13.75''
1:8" RH
6918
243 Win
4
Alloy Steel/
Matte Black
Black Composite
None
22.00"
42.00"
6.25 lbs.
13.75''
1:9" RH
COMPARE
Model
Number
6955
Calibre
Capacity
Material/Finish
Stock
Sights
Barrel
Length
22.00''
Overall
Length
42.00''
Twist
6916
270 Win
4
Alloy Steel/
Matte Black
Black Composite
None
22.00"
42.50"
6.25 lbs.
13.75''
1:10" RH
7.25 lbs.
Length
of Pull
13.75''
22-250 Rem
4
Alloy Steel/
Matte Black
Black Composite
Redfield Revolution
Riflescope
1:10''
6920
7mm-08 Rem
4
Alloy Steel/
Matte Black
Black Composite
None
22.00"
42.00"
6.38 lbs.
13.75''
1:9.5" RH
6957
223 Rem
5
Alloy Steel/
Matte Black
Black Composite
Redfield® Revolution™
Riflescope
22.00''
42.00''
7.25 lbs.
13.75''
1:8''
6915
30-06 Sprg
4
Alloy Steel/
Matte Black
Black Composite
None
22.00"
42.50"
6.25 lbs.
13.75''
1:10" RH
6954
243 Win
4
Alloy Steel/
Matte Black
Black Composite
Redfield Revolution
Riflescope
22.00''
42.00''
7.12 lbs.
13.75''
1:9''
6917
308 Win
4
Alloy Steel/
Matte Black
Black Composite
None
22.00"
42.00"
6.12 lbs.
13.75''
1:10" RH
Black Composite
™
6952
270 Win
4
Alloy Steel/
Matte Black
Redfield Revolution
Riflescope
22.00''
42.50''
7.12 lbs.
13.75''
1:10''
6956
7mm-08 Rem
4
Alloy Steel/
Matte Black
Black Composite
Riflescope
22.00''
42.00''
7.25 lbs.
13.75''
1:9.5''
6951
30-06 Sprg
4
Alloy Steel/
Matte Black
Black Composite
Riflescope
22.00''
42.50''
7.12 lbs.
13.75''
1:10''
6953
308 Win
4
Alloy Steel/
Matte Black
Black Composite
Riflescope
22.00''
42.00''
7.00 lbs.
13.75''
1:10''
®
®
®
™
™
Weight
1:10" RH
20
19
THE
RUGER
AMERICAN
R I M F I R E®
Features
Ruger American Rimfire ® with
Threaded Barrel (Model 8305)
Ruger American Rimfire ® Compact
with Threaded Barrel (Model 8306)
Each Ruger American Rimfire ® rifle includes two
interchangeable stock modules that provide comb
height options for scope or iron sight use. Standard
models come with long length of pull modules,
while compact models come with short length
of pull modules. By simply removing the rear sling
swivel stud, stock modules can be changed in
seconds. All four stock modules are completely
interchangeable across all models and are
available at ShopRuger.com.
Models chambered in .22 LR feature the
detachable, flush-mounted 10/22 ® BX-1 10-round
rotary magazine and accept all 10/22 ® magazines,
including the BX-25 ®, BX-25 ®x2 and BX-15 ™.
The 100% American-made Ruger American Rimfire ® bolt-action rifle builds on the
enormous success of the centerfire Ruger American Rifle ®. With many of the standard
Ruger American Rifle ® features, this line also combines several design innovations from
the popular 10/22 ® rimfire rifle. This combination, along with the rifle’s adaptability, will
appeal to all bolt-action enthusiasts – young or old, novice or experienced.
Power Bedding® Integral Bedding Blocks
for Outstanding Accuracy
Includes Two Interchangeable Stock Modules that
Provide Comb Height Options for Scope or Iron Sight Use
Visible, Accessible and
Easy-to-Actuate Tang Safety
Ruger Marksman Adjustable ™ trigger offers a crisp
release with a pull weight that is user adjustable
between 3 and 5 pounds, allowing shooters to
make that perfect shot.
Ergonomic, lightweight black composite stock
(designed for quick, easy handling) blends a
classic look with modern forend contouring
and grip serrations.
Features a visible, accessible and easy-to-actuate
tang safety that provides instant security.
Cold hammer-forged barrel results in ultra-precise
rifling that provides exceptional accuracy, longevity
and easy cleaning.
Models chambered in .22 Magnum and .17 HMR
use the detachable, flush-mounted JMX-1
9-round rotary magazine.
A 3/8'' rimfire scope base is machined into the
receiver, which is also drilled and tapped for
Weaver ® #12 bases (not included).
Easy-to-use 10/22 ®-style extended magazine
release provides smooth, no-fuss removal of
flush-mounted magazine.
A 60˚ bolt provides ample scope clearance and the
easy-to-use, receiver-mounted bolt release allows
the bolt to be readily removed without requiring a
pull of the trigger, a unique safety feature among
rimfire, bolt-action rifles.
Patent-pending Power Bedding ® integral bedding
block system positively locates the receiver and
free-floats the barrel for outstanding accuracy.
Ruger Marksman Adjustable™ Trigger Provides a Crisp
Release with a User-Adjustable 3-5 lb. Trigger Pull
Also Includes: Williams ™ fibre optic front sight and
adjustable, “V” slot, folding-leaf rear sight; sling
swivel studs.
Detachable 10/22®-Style Rotary Magazine
Provides Reliable Feeding
R U G E R . C O M /A M E R I C A N R I M F I R E
21
22
THE
RUGER
AMERICAN
R I M F I R E®
RU G E R A M
MER
E R IC A
AN
N RIMF IRE
IR E ®
RUGE R A M E RIC AN R IM FIR E ® COM PA CT
Model 8301 Shown
Model 8303 Shown
Satin Blued, Target-Crowned, Cold
Hammer-Forged 22.00'' Barrel
Comes with Two
Interchangeable
Stock Modules
Satin Blued, Target-Crowned, Cold
Hammer-Forged 18.00'' Barrel
COMPARE
Comes with Two
Interchangeable
Stock Modules
COMPARE
Model
Number
8311
Calibre
Capacity
Material/ Finish
Stock
Sights
Barrel
Length
22.00''
Overall
Length
41.00''
Weight
17 HMR
9
Alloy Steel/ Satin
Blued
Black Composite
Williams™ Fibre Optic Front,
Adjustable Rear
8301
22 LR
10
Alloy Steel/ Satin
Blued
Black Composite
8321
22 WMR
9
Alloy Steel/ Satin
Blued
Black Composite
Twist
6.00 lbs.
Length
of Pull
13.75''
Adjustable Rear
22.00''
41.00''
6.00 lbs.
Adjustable Rear
22.00''
41.00''
6.00 lbs.
Calibre
Capacity
Material/ Finish
Stock
Sights
1:9''
Model
Number
8313
17 HMR
9
Alloy Steel/ Satin
Blued
Black Composite
Adjustable Rear
13.75''
1:16''
8303
22 LR
10
Alloy Steel/ Satin
Blued
Black Composite
13.75''
1:14''
8323
22 WMR
9
Alloy Steel/ Satin
Blued
Black Composite
RU G E R A MER IC A N RIMF IRE ® WITH THR E ADED B AR R E L
Barrel
Length
18.00''
Overall
Length
35.75''
Weight
Twist
5.38 lbs.
Length
of Pull
12.50''
Adjustable Rear
18.00''
35.75''
5.38 lbs.
12.50''
1:16''
Adjustable Rear
18.00''
35.75''
5.38 lbs.
12.50''
1:14''
1:9''
RUGE R A M E RIC AN R IM FIR E ® COM PA CT W I TH TH RE A DE D B ARRE L
Model 8305 Shown
Model 8306 Shown
Threaded Barrel Models Feature Either a
1/2"-28 or 1/2"-20 Thread Pattern and
a Factory Installed Thread Protector
Comes with Two
Interchangeable
Stock Modules
Threaded Barrel Models Feature Either a
1/2"-28 or 1/2"-20 Thread Pattern and
a Factory Installed Thread Protector
COMPARE
Comes with Two
Interchangeable
Stock Modules
COMPARE
Model
Number
8312
Calibre
Capacity
17 HMR
9
8305
22 LR
10
8322
22 WMR
8316
Material/
Finish
Alloy Steel/
Satin Blued
Stock
Sights
Thread
Pattern
1/2"-28
Barrel
Length
18.00''
Overall
Length
37.00''
Weight
Twist
5.55 lbs.
Length
of Pull
13.75''
Black Composite
Adjustable Rear
Alloy Steel/
Satin Blued
Black Composite
Adjustable Rear
1/2"-28
18.00''
37.00''
5.55 lbs.
13.75''
1:16''
9
Alloy Steel/
Satin Blued
Black Composite
Adjustable Rear
1/2"-28
18.00''
37.00''
5.55 lbs.
13.75''
1:14''
17 HMR
9
Alloy Steel/
Satin Blued
Black Composite
Adjustable Rear
1/2"-20
18.00''
37.00''
5.55 lbs.
13.75''
1:9''
8310
22 LR
10
Alloy Steel/
Satin Blued
Black Composite
Adjustable Rear
1/2"-20
18.00''
37.00''
5.55 lbs.
13.75''
1:16''
8326
22 WMR
9
Alloy Steel/
Satin Blued
Black Composite
Adjustable Rear
1/2"-20
18.00''
37.00''
5.55 lbs.
13.75''
1:14''
1:9''
Model
Number
8314
Calibre
Capacity
17 HMR
9
8306
22 LR
10
8324
22 WMR
8315
Material/
Finish
Alloy Steel/
Satin Blued
Stock
Sights
Thread
Pattern
1/2"-28
Barrel
Length
18.00''
Overall
Length
35.75''
Weight
Twist
5.38 lbs.
Length
of Pull
12.50''
Black Composite
Adjustable Rear
Alloy Steel/
Satin Blued
Black Composite
Adjustable Rear
1/2"-28
18.00''
35.75''
5.38 lbs.
12.50''
1:16''
9
Alloy Steel/
Satin Blued
Black Composite
Adjustable Rear
1/2"-28
18.00''
35.75''
5.38 lbs.
12.50''
1:14''
17 HMR
9
Alloy Steel/
Satin Blued
Black Composite
Adjustable Rear
1/2"-20
18.00''
35.75''
5.38 lbs.
12.50''
1:9''
8309
22 LR
10
Alloy Steel/
Satin Blued
Black Composite
Adjustable Rear
1/2"-20
18.00''
35.75''
5.38 lbs.
12.50''
1:16''
8325
22 WMR
9
Alloy Steel/
Satin Blued
Black Composite
Adjustable Rear
1/2"-20
18.00''
35.75''
5.38 lbs.
12.50''
1:14''
MODUL AR STANDARD STOCK SYSTEM
MODULAR COMPACT STOCK SYSTEM
Low Comb/Standard Pull: 1.26'' Comb, 13.75'' Length of Pull
Low Comb/Compact Pull: 1.26'' Comb, 12.50'' Length of Pull
This comb is intended for use with the Ruger American Rimfire’s standard iron sights. The low comb height places the shooter’s eye in line with the iron sights. It has
the standard length of pull buttstock, ideal for shooters that prefer a longer length of pull. This stock module is included with all standard models and is intended to be
sold as a modular adaptation for the compact models. Item#: 90431
This comb is intended for use with the Ruger American Rimfire’s standard iron sights. The low comb height places the shooter’s eye in line with the iron sights. It has
the shorter length of pull buttstock, ideal for shooters that prefer a shorter length of pull. This stock module is included with all compact models and is intended to be
sold as a modular adaptation for the standard models. Item#: 90433
High Comb/Standard Pull: 1.84'' Comb, 13.75'' Length of Pull
High Comb/Compact Pull: 1.84'' Comb, 12.50'' Length of Pull
This comb is intended for use with aftermarket scopes or mounted sights. The high comb height raises the shooter’s cheek placement, putting the eyes in line with the
mounted optics. It has the standard length of pull buttstock, ideal for shooters that prefer a longer length of pull. This stock module is included with all standard models
and is intended to be sold as a modular adaptation for the compact models. Item#: 90432
This comb is intended for use with aftermarket scopes or mounted sights. The high comb height raises the shooter’s cheek placement, putting the eyes in line with the
mounted optics. It has the shorter length of pull buttstock, ideal for shooters that prefer a shorter length of pull. This stock module is included with all compact models
and is intended to be sold as a modular adaptation for the standard models. Item#: 90434
R U G E R . C O M /A M E R I C A N R I M F I R E
1:9''
23
24
ABOUT
THE
WEB
V I SIT RUG E R.C OM T OD A Y A N D:
Contact the CEO or
Customer Service: Do you
have comments or thoughts
on Ruger ® products? Visit our
Tell the CEO section! Our
Customer Service section
provides resources for using
and maintaining your Ruger® firearms and explains how
to get in touch with our Customer Service Department.
5
Review Product Specifications:
View full specifications on all current
Ruger® firearms to compare features
between different models and research
which model is best for you.
1
Search Our Complete Product
Database: Find the firearm that suits
your needs. Search our product database
by Calibre, left-handed models, California
and Massachusetts approved handguns
or our newest models.
3
5
1
2
2
4
3 Review FAQs and Additional
Product Information: Find out
if others have asked the
same question you have,
download entire instruction
manuals or view Ruger ®
product history.
Search Distributor
Exclusives: Find a complete
listing of unique firearms
offered by our distributors.
4
Sign Up for Special Offers,
Promotions and Product Updates:
Add yourself to the mailing list for the
topics that interest you like Cowboy
Action Shooting, Personal Defense
or Hunting – or sign up for them all!
Subscribe to the “Ruger Firearms”
YouTube Channel, Like the “Ruger”
Facebook Page and Pin “Ruger”
on Pinterest: Gain access to
exclusive information and contests,
watch videos related to your
favorite Ruger® products and join
discussions with other Ruger fans.
R U G E R.C O M
Watch Original
Videos, Shows
and Product Ads:
Learn about everything
Ruger – from our products
to our history – in our
extensive video collection.
Shooters of all experience levels can gain a variety of tips
from experts in the field.
5
26
25
THE
R U G E R® G U N S I T E S C O U T R I F L E
Features
Gunsite Scout Rifle
in 5.56 NATO (Model 6824)
The Ruger Gunsite
Scout Rifle is the perfect
lightweight, hard-hitting,
do-it-all bolt-action rifle.
Gunsite Scout Rifle
with Composite Stock (Model 6830)
®
The forward-mounted Picatinny rail allows for the
mounting of modern optics, like an intermediate
eye relief scope (not included), for “both eyes
open” sighting and super-fast target acquisition.
G U N S ITE S C O UT RIF LE
COMPARE
Twist
6.25 lbs.
Length
of Pull
12.75''- 14.25''
1:10''
Muzzle
Threads
5/8"-24
37.00''38.50''
6.25 lbs.
12.75''- 14.25''
1:10''
5/8"-24
16.10''
37.00''38.50''
7.10 lbs.
12.75''- 14.25''
1:8''
1/2"-28
Black Laminate
16.10''
37.00''38.50''
7.10 lbs.
12.75''- 14.25''
1:8''
1/2"-28
Alloy Steel/
Matte Black
Black Laminate
16.10''
37.00''38.50''
7.10 lbs.
12.75''- 14.25''
1:8''
1/2"-28
10
Stainless Steel/
Matte Stainless
Black Laminate
16.10''
37.00''38.50''
7.10 lbs.
12.75''- 14.25''
1:8''
1/2"-28
308 Win
10
Alloy Steel/
Matte Black
Black Laminate
16.10''
38.00''39.50''
7.10 lbs.
12.75''- 14.25''
1:10''
5/8"-24
6814
308 Win
10
Alloy Steel/
Matte Black
Black Laminate
16.10''
38.00''39.50''
7.10 lbs.
12.75''- 14.25''
1:10''
5/8"-24
6822
308 Win
10
Stainless Steel/
Matte Stainless
Black Laminate
18.70''
39.50''41.00''
7.30 lbs.
12.75''- 14.25''
1:10''
5/8"-24
6821
308 Win
10
Stainless Steel/
Matte Stainless
Black Laminate
18.70''
39.50''41.00''
7.30 lbs.
12.75''- 14.25''
1:10''
5/8"-24
Model
Number
6829
Calibre
Capacity
Material/Finish
Stock
Composite
Barrel
Length
16.10''
Overall
Length
37.00''38.50''
308 Win
10
Stainless Steel/
Matte Stainless
6830
308 Win
10
Alloy Steel/
Matte Black
Composite
16.10''
6824
223 Rem /
5.56 NATO
10
Alloy Steel/
Matte Black
Black Laminate
6825
223 Rem /
5.56 NATO
10
Stainless Steel/
Matte Stainless
6827
223 Rem /
5.56 NATO
10
Left-Handed
6828
223 Rem /
5.56 NATO
6803
Left-Handed
Left-Handed
Left-Handed
Flash Suppressor or Muzzle Brake (Models 6829 and 6830)
Weight*
Protected Adjustable Ghost Ring Rear Sight
*Without magazine.
Also offers a built-in, accurate sighting system
with ghost ring adjustable rear aperture sight
and a protected, non-glare post front sight.
10-round, detachable box magazine with
push-forward, Mini-14 ®-style magazine
release just forward of the trigger guard
(additional magazines available for purchase
at ShopRuger.com).
Patented integral scope mounts, machined
directly on the solid-steel receiver, provide
a stable mounting surface for scope rings,
eliminating a potential source of looseness and
inaccuracy in the field (scope rings included).
Soft rubber buttpad with buttpad spacers
allow the rifle to be properly sized for different
shooters or varying levels of outerwear or
defensive gear (three 1/2'' spacers included).
Forward-Mounted Picatinny Rail
Cold hammer-forged barrel results in ultraprecise rifling that provides exceptional
accuracy, longevity and easy cleaning.
Rugged and reliable with a glass-reinforced
nylon trigger guard and magazine well.
Non-rotating, Mauser-type controlled round feed
extractor is the most positive case extraction
system ever invented, and features a fixed bladetype ejector that positively ejects the empty
cases as the bolt is moved fully rearward.
Developed with Gunsite, this rifle is “Gunsite
Approved” and features the Gunsite name
rollmarked on the receiver and engraved on
the grip cap of laminate stock models.
Lightweight composite stock on models 6829
and 6830 features a forward aluminium bedding
block and rear aluminium pillar that positively
locate the receiver and free floats the barrel.
Also Includes: rugged, one-piece, stainless
steel bolt; three-position safety; sling
swivel studs.
Soft-Rubber Buttpad with 3-1/2" Spacers
R U G E R . C O M /S C O U T R I F L E
28
27
THE
Features
R U G E R® G U I D E G U N
Guide Gun in .375 Ruger (Model 47125)
THE RUG ER ® MUZZL E BRAKE SYSTEM:
Includes a removable, radial-port muzzle brake that
significantly reduces felt recoil. For times when the
brake is not preferred, it may be replaced by the
included dynamically-matched muzzle weight. Switching
between the brake and the weight will not change
the bullet’s point of impact for a particular load. The
included thread protector may be used if neither the
brake nor the weight is desired.
The LC6 ™ trigger features smooth, crisp performance right out of the box for increased accuracy
on the range or in the field.
Rugged and hard-hitting, the compact and easy-to-carry Ruger
Guide Gun is ready for whatever conditions or game come your way.
Non-rotating, Mauser-type controlled round feed extractor is the most positive case extraction
system ever invented, and features a fixed blade-type ejector that positively ejects the empty
G U I DE GUN
Three-position safety is easily accessible and allows the shooter to lock the bolt or to load
and unload the rifle with the safety engaged.
®
COMPARE
Twist
8.12 lbs.
Length
of Pull
12.75''- 14.25''
40.50''42.00''
8.00 lbs.
12.75''- 14.25''
1:10''
20.00''
41.00''42.50''
8.12 lbs.
12.75''- 14.25''
1:10''
Bead Front,
Adjustable Rear
20.00''
41.00''42.50''
8.00 lbs.
12.75''- 14.25''
1:10''
Green Mountain
Laminate
Bead Front,
Adjustable Rear
20.00''
41.00''42.50''
8.12 lbs.
12.75''- 14.25''
1:10''
Stainless Steel/
Hawkeye Matte
Green Mountain
Laminate
Bead Front,
Adjustable Rear
20.00''
41.00''42.50''
8.12 lbs.
12.75''- 14.25''
1:12''
3
Stainless Steel/
Hawkeye Matte
Green Mountain
Laminate
Bead Front,
Adjustable Rear
20.00''
41.00''42.50''
8.12 lbs.
12.75''- 14.25''
1:12''
3
Stainless Steel/
Hawkeye Matte
Green Mountain
Laminate
Bead Front,
Adjustable Rear
20.00''
41.00''42.50''
8.12 lbs.
12.75''- 14.25''
1:12''
Model
Number
47114
Calibre
Capacity
Material/Finish
Stock
Sights
Barrel
Length
20.00''
Overall
Length
40.50''42.00''
Weight
300 RCM
3
Stainless Steel/
Hawkeye Matte
Green Mountain
Laminate
Bead Front,
Adjustable Rear
47115
338 RCM
3
Stainless Steel/
Hawkeye Matte
Green Mountain
Laminate
Bead Front,
Adjustable Rear
20.00''
47116
300 Win Mag
3
Stainless Steel/
Hawkeye Matte
Green Mountain
Laminate
Bead Front,
Adjustable Rear
47117
338 Win Mag
3
Stainless Steel/
Hawkeye Matte
Green Mountain
Laminate
47118
30-06 Sprg
4
Stainless Steel/
Hawkeye Matte
47124
375 Ruger
3
47125
375 Ruger
47130
416 Ruger
Left-Handed
Ruger Logo-Engraved Grip Cap
1:10''
“Express-Style” Windage Adjustable Rear Sight and Large White Bead Front Sight
Hinged solid-steel floorplate for easy unloading without having to chamber each cartridge.
Features an engraved Ruger logo and patented latch that is flush with the trigger guard to
avoid accidental dumping of cartridges.
Shallow “express-style” windage adjustable “V” notch rear sight and large white bead front sight
for instant target acquisition.
Patented integral scope mounts, machined directly on the solid-steel receiver, provide a stable
mounting surface for scope rings, eliminating a potential source of looseness and inaccuracy
in the field (scope rings included).
Rugged Green Mountain laminate stock is dimensionally stable through environmental extremes,
features a soft rubber buttpad with buttpad spacers that allow the rifle to be properly sized for
different shooters or varying levels of outerwear (three 1/2'' spacers included) and wrap-around
checkering that provides a sure grip in any weather.
Also Includes: rugged one-piece, stainless steel bolt; swivel studs with both a barrel-band
mounted stud and an optional forend stud supplied for mounting sling swivels.
Three-Position Safety
Buttpad Spacers Allow for Adjustable Length of Pull
R U G E R . C O M /G U I D E G U N
30
29
THE
Features
R U G E R® H A W K E Y E® A F R I C A N
Hawkeye ® African in .300 Win. Mag. (Model 47119)
The LC6 ™ trigger features smooth, crisp performance right out of the box for increased accuracy
on the range or in the field.
system ever invented, and features a fixed blade-type ejector that positively ejects the empty cases
as the bolt is moved fully rearward.
The Ruger Hawkeye African with Muzzle Brake System
delivers the same big game performance as previous African
models, but now features a removable, radial-port muzzle
brake that significantly reduces felt recoil.
Features an engraved Ruger logo and patented latch that is flush with the trigger guard
to avoid accidental dumping of cartridges.
H AWK E YE® AFRIC A N
Ergonomically pleasing, American walnut stock has rounded contours along the barrel, on the bottom
of the stock and on top of the pistol grip and wrap-around checkering on grip and forend.
®
®
COMPARE
Model
Number
47119
Calibre
Capacity
Material/ Finish
Stock
Sights
300 Win Mag
3
Alloy Steel/
Satin Blued
American Walnut with
Ebony Forend Cap
Bead Front,
Adjustable Rear
47120
338 Win Mag
3
Alloy Steel/
Satin Blued
Ebony Forend Cap
37186
375 Ruger
3
Alloy Steel/
Satin Blued
47121
375 Ruger
3
37185
416 Ruger
3
Left-Handed
Barrel
Length
23.00''
Overall
Length
44.88''
Bead Front,
Adjustable Rear
23.00''
Ebony Forend Cap
Bead Front,
Adjustable Rear
Alloy Steel/
Satin Blued
Ebony Forend Cap
Alloy Steel/
Satin Blued
Ebony Forend Cap
American Walnut Stock with Ebony Forend Cap
Weight
8.00 lbs.
Length
of Pull
13.50''
Twist
1:10''
44.88''
8.00 lbs.
13.50''
1:10''
23.00''
44.88''
8.00 lbs.
13.50''
1:12''
Bead Front,
Adjustable Rear
23.00''
44.88''
8.00 lbs.
13.50''
1:12''
Bead Front,
Adjustable Rear
23.00''
44.88''
7.88 lbs.
13.50''
1:14''
Sling Swivel Studs with a Barrel-Band Mounted Stud (Optional Forend Stud Also Supplied)
Shallow “express-style” windage adjustable “V” notch rear sight and large white bead front sight
for instant target acquisition.
Patented integral scope mounts, machined directly on the solid-steel receiver, provide a stable mounting
surface for scope rings, eliminating a potential source of looseness and inaccuracy in the field (scope
rings included).
Also Includes: rugged one-piece, stainless steel bolt; barrel-band mounted swivel stud.
TH E RU GE R® MUZZL E BR AK E S YSTE M :
Includes a removable, radial-port muzzle brake that significantly reduces
felt recoil. For times when the brake is not preferred, it may be replaced
by the included dynamically-matched muzzle weight. Switching between
the brake and the weight will not change the bullet’s point of impact for
a particular load. The included thread protector may be used if neither
the brake nor the weight is desired.
Hinged Solid-Steel Floorplate
for Easy Unloading
R U G E R . C O M /A F R IC A N
“Express Style” Windage Adjustable
Rear Sight and Bead Front Sight
32
31
THE
Features
R U G E R® H A W K E Y E®
Hawkeye ® Standard in .223 Rem.
(Model 37117)
Hawkeye ® Magnum Hunter in .300 Win. Mag.
(Model 47128)
system ever invented, and features a fixed blade-type ejector that positively ejects the empty
Features an engraved Ruger logo and patented latch that is flush with the trigger guard to
avoid accidental dumping of cartridges.
The classic Ruger Hawkeye bolt-action rifles are built
®
®
with versatility, style and performance in mind, meeting
the challenges of hunters throughout the world.
Patented Integral Scope Mounts
Hinged Solid-Steel Floorplate
mounting surface for scope rings, eliminating a potential source of looseness and inaccuracy
in the field (scope rings included).
Ergonomically pleasing stock has rounded contours along the barrel, on the bottom of the stock
and on top of the pistol grip and wrap-around checkering on grip and forend.
Also Includes: rugged one-piece, stainless steel bolt; studs for mounting sling swivels.
Non-Rotating, Mauser-Type
Controlled Round Feed Extractor
R U G E R . C O M /H AW K E Y E
33
34
THE
H AWK E YE® S TAN DARD
H AW K E YE ® C OMPACT
Model 37117 Shown
6.25 lbs.
AND UNDER
Model 37138 Shown
The LC6™ Trigger for
Increased Accuracy
COMPARE
Model
Number
37116
Calibre
Capacity
Material/Finish
Stock
Sights
204 Ruger
5
Alloy Steel/
Satin Blued
American Walnut
37117
223 Rem
5
Alloy Steel/
Satin Blued
37119
243 Win
4
37121
270 Win
37122
Red Rubber Buttpad
for Recoil Reduction,
Features Ruger Logo
None
Barrel
Length
24.00''
Overall
Length
44.00''
American Walnut
None
22.00''
Alloy Steel/
Satin Blued
American Walnut
None
4
Alloy Steel/
Satin Blued
American Walnut
7mm Rem
Mag
3
Alloy Steel/
Satin Blued
37123
7mm-08 Rem
4
37125
30-06 Sprg
37126
37124
Weight
Extensive Cut Checkered
Grip and Wrap-Around
Checkered Forend
Twist
7.25 lbs.
Length
of Pull
13.50''
1:12''
42.00''
7.25 lbs.
13.50''
1:9''
22.00''
42.00''
7.00 lbs.
13.50''
1:9''
None
22.00''
42.75''
8.00 lbs.
13.50''
1:10''
American Walnut
None
24.00''
44.75''
8.25 lbs.
13.50''
1:9.5''
Alloy Steel/
Satin Blued
American Walnut
None
22.00''
42.00''
7.00 lbs.
13.50''
1:9.5''
4
Alloy Steel/
Satin Blued
American Walnut
None
22.00''
42.75''
7.50 lbs.
13.50''
1:10''
300 Win Mag
3
Alloy Steel/
Satin Blued
American Walnut
None
24.00''
44.75''
8.00 lbs.
13.50''
1:10''
308 Win
4
Alloy Steel/
Satin Blued
American Walnut
None
22.00''
42.00''
7.00 lbs.
13.50''
1:10''
Our Lightest
Hawkeye® Rifle
Increased Accuracy
American Walnut Stock
COMPARE
Model
Number
37137
Calibre
Capacity
Material/Finish
Stock
Sights
None
Barrel
Length
16.50''
Overall
Length
35.50''
223 Rem
5
Alloy Steel/
Satin Blued
American Walnut
37138
243 Win
4
Alloy Steel/
Satin Blued
American Walnut
None
16.50''
37140
7mm-08 Rem
4
Alloy Steel/
Satin Blued
American Walnut
None
37139
308 Win
4
Alloy Steel/
Satin Blued
American Walnut
None
Weight
6.25 lbs.
Length
of Pull
12.50''
Twist
1:9''
35.50''
6.00 lbs.
12.50''
1:9''
16.50''
35.50''
6.00 lbs.
12.50''
1:9.5''
16.50''
35.50''
5.75 lbs.
12.50''
1:10''
H AW K E YE ® L A M IN ATE COMPACT
Model 17107 Shown
H AWK E YE® M AGNUM H UNTE R
6.50 lbs.
AND UNDER
Lightweight
Increased Accuracy
COMPARE
Increased Accuracy
Model
Number
47128
Calibre
Capacity
Material/Finish
Stock
Sights
300 Win Mag
3
Stainless Steel/Hawkeye
Matte Stainless
Green Hogue ®
None
Barrel
Length
24.00''
The Ruger® Muzzle Brake
System with Removable,
Radial-Port Muzzle Brake
Overall
Length
44.75''
Weight
8.00 lbs.
All-Weather
Green Hogue®
OverMolded® Stock
Length
of Pull
13.50''
Twist
1:10''
Model
Number
17107
Calibre
Capacity
Material/Finish
Stock
Sights
None
Barrel
Length
16.50''
Overall
Length
35.50''
223 Rem
5
Stainless Steel/
Hawkeye Matte Stainless
Black Laminate
17108
243 Win
4
Stainless Steel/
Black Laminate
None
16.50''
17111
7mm-08 Rem
4
Stainless Steel/
Black Laminate
None
17110
308 Win
4
Stainless Steel/
Black Laminate
None
Weight
6.50 lbs.
Length
of Pull
12.50''
Twist
1:9''
35.50''
6.25 lbs.
12.50''
1:9''
16.50''
35.50''
6.25 lbs.
12.50''
1:9.5''
16.50''
35.50''
6.00 lbs.
12.50''
1:10''
35
THE
H AWK E YE® VAR
V R M I NT TARGE
VA
T RGE T
TA
Model 17974 Shown
Heavy Contour, Cold Hammer-Forged
Barrel with Target Crown
Target Forend
Unique, Two-Stage, Adjustable Target
Trigger (Not LC6™ Trigger)
COMPARE
Model
Number
17974
Calibre
Capacity
Material/Finish
Stock
Sights
None
Barrel
Length
26''
Overall
Length
46.00''
204 Ruger
5
Stainless Steel/
Black Laminate
17976
22-250 Rem
4
Stainless Steel/
Black Laminate
None
26''
17975
223 Rem
5
Stainless Steel/
Black Laminate
None
17980
6.5
Creedmoor
4
Stainless Steel/
Black Laminate
17979
308 Win
4
Stainless Steel/
Black Laminate
Weight
9.75 lbs.
Length
of Pull
13.50''
Twist
1:12''
46.00''
9.75 lbs.
13.50''
1:14''
26''
46.00''
9.75 lbs.
13.50''
1:9''
None
28''
48.00''
9.50 lbs.
13.50''
1:8''
None
26''
46.00''
9.25 lbs.
13.50''
1:10''
THE RUGER
®
No.1 RIFLE
HAW KE YE® PR EDATOR
Model 17121 Shown
Medium Contour Barrel
COMPARE
Model
Number
17123
Calibre
Capacity
Material/Finish
Stock
Sights
204 Ruger
5
Stainless Steel/
Green Mountain Laminate
17121
22-250 Rem
4
Stainless Steel/
17122
223 Rem
5
47108
6.5
Creedmoor
47123
308 Win
Green Mountain
Laminate Stock
None
Barrel
Length
24.00''
Overall
Length
44.00''
None
24.00''
Stainless Steel/
None
4
Stainless Steel/
4
Stainless Steel/
Weight
Twist
8.00 lbs.
Length
of Pull
13.50''
44.00''
8.00 lbs.
13.50''
1:14''
22.00''
42.00''
7.75 lbs.
13.50''
1:9''
None
24.00''
44.00''
8.12 lbs.
13.50''
1:8''
None
22.00''
42.00''
8.00 lbs.
13.50''
1:10''
1:12''
WHEN YOU ONLY HAVE ONE SHOT,
MAKE IT COUNT.
When you think of single-shot rifles, think of the best – think
Ruger® No.1. The No.1 rifle is made for virtually every sporting activity.
Find the configuration that is best for you, or collect them all.
H AWK E YE® FTW P RE DATOR
No.1 rifles are available in select, limited edition models for 2015:
Medium Contour Barrel
Model 47139 Shown
Green Mountain Laminate Stock
with Adjustable Length of Pull
No.1 LIGHT SPORTER
No.1 MEDIUM SPORTER
No.1 VARMINTER
No.1 TROPICAL
COMPARE
Model
Number
47139
47140
Calibre
Capacity
Material/Finish
Stock
Sights
None
Barrel
Length
24.00''
Overall
Length
43.25''44.75''
6.5
Creedmoor
4
Stainless Steel/
308 Win
4
Stainless Steel/
None
22.00''
41.25''42.75''
Weight
8.12 lbs.
8.00 lbs.
Length of
Pull
12.75''14.25''
12.75''14.25''
No.1 INTERNATIONAL
Twist
1:8''
1:10''
THE RUGER No.1 RIFLE IS AVAILABLE ONLY AT YOUR
INDEPENDENT RETAILER OF RUGER FIREARMS!
®
®
38
37
T H E R U G E R® R O T A R Y M A G A Z I N E R I F L E S
Features
Ruger 77/17 ® with Matte Stainless Finish
and Green Mountain Laminate Stock (Model 7212)
Ruger 77/22 ® with Matte Stainless Finish
and American Walnut Stock (Model 7044)
Ruger 77/44 ® with
Matte Stainless Finish and
(Model 7402)
mounting surface for scope rings, eliminating a potential source of looseness and inaccuracy in
the field (scope rings included).
In 1983, Ruger responded to the many shooters who desired a high-quality,
adult-size .22 rimfire rifle – one that was built to centerfire standards of
strength, accuracy and aesthetics. Focused on building a rifle that was
accurate, economical and extremely handsome, Bill Ruger launched the
family of bolt-action rifles using the rotary magazine.
Solid, Heat-Treated Alloy and Stainless Steel Actions
Three-position safety is easily accessible and allows the shooter to lock the bolt to load and
unload the rifle with the safety engaged.
Solid, heat-treated alloy and stainless steel actions feature a rugged, stainless steel bolt with
90˚ bolt lift and ultra-fast lock time for added accuracy.
Detachable rotary magazine features a unique rotor to separate cartridges and provide reliable
feeding; mounts flush with the stock to eliminate protrusions at the rifle’s balance point.
Also Includes: sling swivel studs.
Detachable Rotary Magazine
R U G E R . C O M /7 7
Patented Integral Scope Mounts (Optics Not Included)
39
40
RU G ER 77 / 1 7® W I T H BLU E D F INISH AND A M ER IC AN WA LN U T STO C K
RU GE R 7 7 /2 2 ® W I TH BLU E D FI N I S H A N D A M E RIC A N WA LN U T STO CK
Model 7002 Shown
Alloy Steel with
Blued Finish
Model
Number
7024
Calibre
Capacity
17 HMR
9
Material/
Finish
Alloy Steel/
Blued
Stock
Sights
American Walnut
None
Barrel
Length
22.00''
Overall
Length
41.25''
Weight
6.50 lbs.
Alloy Steel with
Blued Finish
Length
of Pull
13.50''
Twist
1:9''
COMPARE
Model
Number
7002
Calibre
Capacity
Material/
Finish
Alloy Steel/
Blued
Stock
Sights
22 LR
10
7015
22 WMR
7201
22 Hornet
Overall
Length
39.25''
Weight
None
Barrel
Length
20.00''
American Walnut
9
Alloy Steel/
Blued
6
Alloy Steel/
Blued
Twist
6.50 lbs.
Length
of Pull
13.50''
American Walnut
None
20.00''
39.25''
6.50 lbs.
13.50''
1:14''
American Walnut
None
20.00''
39.25''
6.50 lbs.
13.50''
1:14''
1:16''
RU GE R 7 7 /2 2 ® W I TH
T H M ATTE S TA I N
NL
LE
ESS FINIS
SH
H AND AME
ERIC
RIC A N WAL
WALN
N U T S TO C K
RU G ER 77 / 1 7® W I T H M ATT E STAINL E SS F INI S H AN D BL AC K L A M IN AT E STO C K
Model 7044 Shown
Stainless Steel with
Matte Stainless Finish
Model
Number
7027
Calibre
Capacity
17 HMR
9
Material/
Finish
Stainless Steel/ Matte
Stainless
Stock
Sights
Black Laminate
None
Barrel
Length
24.00''
Overall
Length
43.25''
Weight
7.50 lbs.
Model
Number
7212
Calibre
Capacity
17 Hornet
6
Material/
Finish
Stainless
Stock
Sights
None
Barrel
Length
24.00''
Overall
Length
43.25''
Weight
7.50 lbs.
COMPARE
Length
of Pull
13.50''
Twist
1:9''
RU G ER 77 / 1 7® W I T H M ATT E STAINL E SS F INI S H AN D G R EEN MO U N TAIN L A M IN AT E STO C K
Model
Number
7044
Calibre
Capacity
22 LR
10
7043
22 WMR
9
Material/
Finish
Stainless
Stock
Sights
None
Barrel
Length
24.00''
Overall
Length
43.25''
American
Walnut
Stainless
American
Walnut
None
24.00''
43.25''
Weight
Twist
7.50 lbs.
Length
of Pull
13.50''
7.50 lbs.
13.50''
1:14''
1:16''
RU GE R 7 7 /2 2 ® W I TH M ATTE S TA I N LE S S F I N I S H A N D GRE E N MO U N TA I N L A M I N AT E S TO C K
Green Mountain
Laminate Stock
Length
of Pull
13.50''
Twist
1:9''
Model
Number
7204
Calibre
Capacity
22 Hornet
6
Material/
Finish
Stainless Steel/
Matte Stainless
R U G E R . C O M /7 7
Stock
Sights
None
Barrel
Length
24.00''
Overall
Length
43.25''
Weight
7.50 lbs.
Green Mountain
Laminate Stock
Length
of Pull
13.50''
Twist
1:14''
41
42
RU G ER 7 7/ 22 ® W I TH BRU SHE D STAINL E SS F IN IS H AN D BL AC K SYN T H ET IC S TO C K
RU GE R 7 7 /4 4 ® W I TH N E XT G1 V I S TA C A MO STO CK
Model 7016 Shown
Brushed Stainless Finish
Bead Front and
Adjustable Rear Sights
Next G1 Vista
Camo Stock
COMPARE
Model
Number
7009
Calibre
Capacity
22 LR
10
7016
22 WMR
9
Material/
Finish
Stainless Steel/
Brushed Stainless
Stainless Steel/
Brushed Stainless
Stock
Sights
None
Barrel
Length
20.00''
Overall
Length
39.25''
Black Synthetic
Black Synthetic
None
20.00''
39.25''
Weight
6.00 lbs.
Length
of Pull
13.50''
Twist
1:16''
6.00 lbs.
13.50''
1:14''
Model
Number
7408
Calibre
Capacity
44 Rem Mag
4
Material/
Finish
Stainless Steel/ Brushed
Stainless
RU G ER ® 77 / 3 57 ™
Bead Front and
Model
Number
7405
Calibre
Capacity
357 Mag
5
Material/
Finish
Stainless Steel/
Brushed Stainless
Stock
Sights
Black Synthetic
Bead Front,
Adjustable
Rear
Barrel
Length
18.50''
Overall
Length
38.50''
Weight
5.50 lbs.
Length
of Pull
13.50''
Twist
1:16''
RU G ER 7 7/ 44 ® W I TH BL AC K SYNT HE T IC S TO C K
Bead Front and
Model
Number
7402
Calibre
Capacity
44 Rem Mag
4
Material/
Finish
Stainless Steel/
Brushed Stainless
Stock
Sights
Black Synthetic
Bead Front,
Adjustable
Rear
Barrel
Length
18.50''
Overall
Length
38.50''
Weight
5.25 lbs.
Length
of Pull
13.50''
Twist
1:20''
R U G E R . C O M /7 7
Stock
Sights
Next G1 Vista
Camo
Bead Front,
Adjustable
Rear
Barrel
Length
18.50''
Overall
Length
38.50''
Weight
5.25 lbs.
Length
of Pull
13.50''
Twist
1:20''
43
44
R U G E R® S C O P E R I N G S
Ruger® scope rings are also available individually, allowing you to purchase only the ring needed, or mix and match, without the added expense
Scope ring heights will be identified by a number manufactured into the lower half of the ring. Below is a ring chart showing the part number and
of purchasing two rings at a time. For example, the Ruger® Hawkeye® rifles are shipped from the factory with a #4 front ring and a #5 rear ring,
catalog number for each scope ring. When ordering scope rings, please use the 5-digit catalog number (90XXX). If you have questions about any
which translates to a medium height scope mount. If you desire a high scope mount, you only need to mount the #5 ring on the front scope mount,
scope rings, please contact our Customer Service Department at 01423 780810.
d)
–
–
–
–
–
–
5K30
90286
5K30
90286
6K30
90287
6K30
90287
–
–
–
–
–
–
–
Rear
–
–
–
–
–
–
Front
–
–
–
–
–
–
–
–
4KO*
90288
4KO*
90288
Rear
–
–
All rings are for 1'' tube diameter EXCEPT those marked 30mm which are for 30mm diameter scopes.
–
–
d)
ue
Bl
KI
M
S
M – Matte
HM – Hawkeye Matte
TG – Target Grey®
30 – 30mm
O – Offset
R U G E R.C O M
ed
-2
22
7/
3B
90269
3B
90269
4B
90270
4B
90270
5B
90271
5B
90271
6B
90272
6B
90272
3K
90281
3K
90281
4K
90282
4K
90282
5K+
90283
5K+
90283
6K
90284
6K
90284
3B
90269
3B
90269
4B
90270
4B
90270
5B
90271
5B
90271
6B
90272
6B
90272
3K
90281
3K
90281
4K
90282
4K
90282
5K
90283
5K
90283
6K
90284
6K
90284
4K30
90285
5K30
90286
4B30
90273
4B30
90273
4B30
90273
4B30
90273
4K30
90285
4K30
90285
4B30
90273
4B30
90273
4K30
90285
4K30
90285
–
5K30
90286
6K30
90287
–
5K30
90286
6K30
90287
–
–
–
–
5B30
90274
5B30
90274
6B30
90275
6B30
90275
5B30
90274
5B30
90274
6B30
90275
6B30
90275
5K30
90286
5K30
90286
6K30
90287
6K30
90287
5B30
90274
5B30
90274
6B30
90275
6B30
90275
5K30
90286
5K30
90286
6K30
90287
6K30
90287
–
–
–
4KO*
90288
4B
90270
4KO*
90288
4B
90270
4KO*
90288
4K
90282
–
–
4KO*
90288
5K
90283
–
–
4KO*
90288
5K
90283
–
–
–
–
–
–
–
4KO*
90288
4KO*
90288
4KO*
90288
–
–
–
–
–
–
–
4KO*
90288
4KO*
90288
4KO*
90288
–
–
5KTG
90295
6KTG
90296
–
–
–
–
–
Red Type – Indicates model rings shipped with firearm
Black Type – Indicates alternate size and configuration
available for that model firearm
+ – 5K scope rings are shipped with K1-H and K1-S rifles
* – Indicates offset rings which feature one or two rings
(single, double) that are offset to the rear by
1/2'' to allow rearward positioning of the scope
ss
le
in
ta
(S
R
M
W
22
d
an
LR
2
/2
77
4,
3B
90269
3B
90269
4B
90270
4B
90270
5B
90271
5B
90271
6B
90272
6B
90272
–
)
(B
7/
,7
ag
M
d
an
LR
22
2-
1V,
K
1-
3KTG
90293
4KTG
90294
4KTG
90294
5KTG
90295
5KTG
90295
6KTG
90296
–
Scope Ring Designations
3 – Low scope ring
4 – Medium scope ring
5 – High scope ring
6 – Extra high scope ring
B – Alloy
K – Stainless
17
)
ss
in
ta
(S
-S
H,
ed
lu
-B
-V
,1
,1
-A
K1
)
/4
4K30
90285
5K30
90286
-B
,K
–
.1
–
.1
–
(B
,1
-H
T
IV
KI
M
77
–
le
RS
50
7/
-S
,7
,1
SI
-R
rg
(Ta
nl
ai
St
I(
KI
M
77
–
3K
90281
4K
90282
4K
90282
5K
90283
5K
90283
6K
90284
–
lu
)
ed
lu
(B
s)
es
nl
ai
St
ey
Gr
et
s)
es
tG
ge
FR
77
77
FR
TG
Ta
r
TG
Ta
r
ge
nt
ro
)
ou
rM
ve
nt
ro
re
yF
ie
tG
r)
re
yF
ro
nt
ie
rB
ie
rR
P
ar
ec
re
M
ei
KI
lM
I,
ou
M
nt
77
nt
RM
s)
es
EX
–
K7
–
5B30
90274
5B30
90274
6B30
90275
6B30
90275
96
–
5K30
90286
5K30
90286
6K30
90287
6K30
90287
K1
–
5K30
90286
5K30
90286
6K30
90287
6K30
90287
No
–
5K30
90286
5K30
90286
6K30
90287
6K30
90287
KM
–
5B30
90274
5B30
90274
6B30
90275
6B30
90275
KM
–
5B30
90274
5B30
90274
6B30
90275
6B30
90275
M
–
5K30
90286
4K30
90285
RS
–
–
4K30
90285
4K30
90285
(F
–
–
4B30
90273
4B30
90273
nl
–
–
4K30
90285
4K30
90285
ai
–
–
4K30
90285
4K30
90285
77
–
–
4K30
90285
4K30
90285
M
–
–
4B30
90273
4B30
90273
Z
–
–
–
BB
4KO*
90288
5B
90271
–
–
St
4KO*
90288
5K
90283
–
5B30
90274
5B30
90274
6B30
90275
6B30
90275
5B30HM
90322
6B30HM
90323
–
–
5K30
90286
5K30
90286
6K30
90287
6K30
90287
5KTG
90295
4KTG
90294
6KTG
90296
5KTG
90295
–
FR
4KO*
90288
5B
90271
6K30
90287
5K30
90286
–
5K
90283
4K
90282
6K
90284
5K
90283
–
77
–
6K30
90287
5K30
90286
–
4KTG
90294
4KTG
90294
5KTG
90295
5KTG
90295
6KTG
90296
6KTG
90296
),
M
I,
KI
,M
77
–
5K30
90286
5K30
90286
6K30
90287
6K30
90287
4K30HM
90318
5K30HM
90319
4B
90270
4B
90270
5B
90271
5B
90271
6B
90272
6B
90272
ed
lu
(B
77
KM
e,
H
ifl
tR
ou
ou
–
5B30
90274
5B30
90274
6B30
90275
6B30
90275
4B30HM
90321
5B30HM
90322
4KHM
90290
4KHM
90290
5KHM
90291
5KHM
90291
6KHM
90284
6KHM
90284
te
at
M
ye
ke
aw
(H
P
RF
77
R,
M
e,
H
tR
ifl
M
II,
k
ar
5B30
90274
6B30
90275
–
4B30
90273
4B30
90273
3K
90281
3K
90281
I(
at
M
ye
ke
aw
(H
AB
PH
RS
77
M
77
HM
ol
st
Pi
III
k
ar
ha
ed
rR
pe
Su
RS
,H
d)
ue
s(
rm
Va
et
rn
Ho
HZ
-V
22
7/
K7
77
)
ed
lu
(B
e
in
rb
Ca
4
PC
d
an
9
PC
Bl
)
ss
le
in
ta
(S
h
nc
Ra
rty
hi
4
i-1
in
KM
5K30HM
90319
6K30HM
90320
–
4K30
90285
4K30
90285
4K
90282
4K
90282
5K
90283
5K
90283
6K
90284
6K
90284
Front
in
t,
K7
wk
7/
Su
17
44
pe
-1
R
7
r
an R
em
HM
d ed
M
48 h
R,
a
a
0 w
g
an
Ru k
(S
d
ta
ge - 4
17
5
i
nl
r 4
M
HM
es
ar
Ca
s)
2
su
Pi k II
ll
st an
ol d
s( M
St ar
ai k
nl III
es
s)
)
ed
lu
(B
R
44
HKR
k
aw
iT
in
M
d
an
P
RS
44
7/
K7
te
k
aw
kh
ac
Bl
er
dh
Re
nd
)a
ss
le
in
ta
(S
nt
Hu
ix
-S
le
ng
Si
up
nt
k
aw
kh
ac
Bl
er
up
er
,S
in
M
),
ed
lu
(B
S
4/4
77
Hu
nc
Ra
rty
hi
iT
in
M
4,
i-1
22
7/
,7
d)
el
Front
er
,S
lu
h
ne
or
(H
H
RS
d
an
H,
-R
d
an
5K30
90286
5K30
90286
6K30
90287
6K30
90287
4K30
90285
4K30
90285
5K30
90286
4K30
90285
4K
90282
4K
90282
5K
90283
5K
90283
6K
90284
6K
90284
Front
4B30
90273
4B30
90273
–
–
Front
4B30
90273
5B30
90274
–
–
Front
4KTG
90294
3KTG
90293
No
Double
Offset Med.
rfi
4B30
90273
4B30
90273
–
–
Front
4K
90282
3K
90281
KM
42MM
Offset Med.
ee
4K30
90285
4K30
90285
4K
90282
4K
90282
5K
90283
5K
90283
6K
90284
6K
90284
–
Rear
42MM
2
4B
90270
4B
90270
5B
90271
5B
90271
6B
90272
6B
90272
KM
30mm
X-High
(D
4B
90270
4B
90270
5B
90271
5B
90271
6B
90272
6B
90272
3B
90269
4B
90270
4B
90270
5B
90271
5B
90271
6B
90272
–
–
Rear
62MM
t-2
4KTG
90294
4KTG
90294
5KTG
90295
5KTG
90295
6KTG
90296
6KTG
90296
M
30mm High
4
Front
3KHM
90289
4KHM
90290
4KHM
90290
5KHM
90291
5KHM
90291
6KHM
90284
–
–
Rear
52MM
in
–
Sc
30MM SCOPE
TUBE DIAMETER
1'' SCOPE TUBE
DIAMETER OFFSET
30mm Med.
/4
–
3KTG
90293
3KTG
90293
4KTG
90294
4KTG
90294
5KTG
90295
5KTG
90295
6KTG
90296
6KTG
90296
3BHM
90277
4BHM
90278
4BHM
90278
5BHM
90279
5BHM
90279
6BHM
90280
–
–
Rear
42MM
rm
–
3B
90269
3B
90269
4B
90270
4B
90270
5B
90271
5B
90271
6B
90272
6B
90272
Sc
X-High
99
Rear
3K
90281
3K
90281
3B
90269
3B
90269
4B
90270
4B
90270
5B
90271
5B
90271
6B
90272
6B
90272
–
Rear
62MM
Va
–
M
High
7/
–
Rear
52MM
K7
–
Bl
Bi
k
aw
dh
Re
d
an
),
ed
Medium
22
RI
E
OP
SC
Front
42MM
LR
ON
CA
TI
LO
NG
HT
IG
HE
E
OP
SC
Low
(B
t)
)
ss
le
in
ta
(S
R
M
W
22
ER
ET
AM
DI
E
IV
CT
JE
OB
E
SC
OP
1'' SCOPE
TUBE DIAMETER
32MM
ue
sle
RH
-4
yH
4R
un
te
(B
r
lu
ed
)
and purchase one new #6 ring to mount on the rear scope mount.
45
46
RUGER LEGAL INFORMATION
22
22
RE
M
RI
FI
RE
FI
M
AN
ER
AM
Model No.
Part No.
90384
SR556MAG-10
5-Round, 223 Rem Magazine
•
90009
MAG/5
•
90339
MAG/10
•
90010
MAG/20
•
90035
MAG/30
90012
MAG/762
•
20-Round, 7.62x39 Magazine
•
10-Round, 22 LR Magazine
•
6-Round, 17 Hornet Magazine
•
9-Round, 22 WMR, 17 HMR Magazine
•
6-Round, 22 Hornet Magazine
•
•
5-Round, 357 Mag Magazine
•
4-Round, 44 Rem Mag Magazine
•
dropped onto a hard surface with a round in the chamber. We are firmly committed to safety and would like to retrofit all affected LCP® pistols. The retrofit
involves installation of an upgraded hammer mechanism at no charge to the customer.
R
GE
RU
•
5-Round, 7.62x39 Magazine
LCP® RECALL NOTICE: In 2008, Ruger received a small number of reports from the field indicating that LCP® pistols could discharge when
We want to remind gun users that, for maximum safety when carrying any pistol with a loaded magazine in
place, the chamber should be empty, and the slide should be closed. Any gun may fire if dropped or struck.
IC
AN
RI
FL
R
GE
RU
RU
GE
R
AM
ER
IC
AN
IC
ER
AM
SC
GU
NS
IT
E
,A
56
-5
SR
RI
E
FL
RI
OU
55
R-
2
/2
10
T
6
TA
K
M
RE
2,
/2
10
E
N,
OW
ED
AG
M
AG
44
57
77
/4
4,
,3
57
/3
77
/2
2
HO
77
77
7,
77
/1
2
/2
77
M
ET
RN
2M
/2
Y
RT
HI
10-Round, 5.56 NATO Magazine
W
LR
2
-2
SR
H
NC
RA
4
I-1
IN
M
d
an
IT
4
IN
I-1
M
IN
M
RIFLE
MAGAZINES:
M
R,
17
HM
R
R U G E R® M A G A Z I N E S
90338
MAG/762-20
90057
JX-1
90397
JHX-2
90076
JMX-1
90090
JHX-1
90345
MAG-77/357
90176
MAG-77/44
How to determine if your pistol needs the retrofit: Any LCP® pistol bearing prefix “370” (that is, serial number 370-xxxxx) may be affected. Newer and
retrofitted “370” prefix LCP® pistols with the new hammer mechanism installed have been marked with a diamond in the flat portion of the slot just behind and
below the hammer, as shown to the right. If your pistol has the diamond, it does not need the retrofit. Any LCP® marked with the serial number prefix “371” (serial number 371-xxxxx) or higher is not
affected. When we return your pistol, we also will send you a FREE magazine with the new finger grip extension as a “thank you” for your patience and cooperation*. Visit RUGER.COM/LCPRECALL for
more information or email at [email protected].
SR9® RECALL NOTICE: We have determined that some Ruger® SR9® pistols manufactured between October 2007
and April 2008 can, under certain conditions, fire if dropped with their manual safeties in the “off” or “fire” position. The pistols
will not fire if the manual safety is in the “on” or “safe” position.
We designed a replacement trigger group which prevents firing when dropped and retrofits all affected Ruger® SR9® pistols
at no charge. This retrofit only applies to SR9® pistols with serial number prefix “330” (330-xxxxx) and these new parts at
NO CHARGE to our customers. When we return your pistol, we also will send you a FREE magazine as a “thank you” for
your patience and cooperation*.
In order to ensure correct fitting, the new parts must be installed at our Ruger factory in Prescott, Arizona. We will remove the
old parts and install the new trigger group promptly, at no charge, and will return the pistol to you. The old parts will not be returned. Visit RUGER.COM/SR9RECALL for more information or email at
[email protected].
•
•
•
90344
BX-1-1
3 Pack, Dust Cover
•
•
•
90403
BX-DC
•
•
•
90041
BX-1-5
•
•
•
90005
BX-1
AN IMPORTANT FREE SAFETY OFFER FROM RUGER:
•
•
•
90463
BX-15
Do you own an “old model” (pre-1973) Ruger® Single-Six®, Blackhawk®, Super Blackhawk® or Bearcat® single-action revolver like these?
2x 25-Round, 22 LR Magazine
•
•
•
90398
BX-25x2
•
•
•
90361
BX-25
5-Round, Black Oxide Steel,
308 Magazine
•
90352
MAG-M77-5S
10-Round, Black Oxide Steel,
308 Win Magazine
•
90353
MAG-M77-10S
5-Round, Polymer,
308 Win Magazine
•
90354
MAG-M77-5P
10-Round, Polymer,
308 Win Magazine
•
90355
MAG-M77-10P
3-Round, Polymer,
308 Win Magazine
•
90374
MAG-M77-3P
4-Round, Long-Action Magazine
(270 Win/30-06 Sprg)
•
90435
AMER-L/ARTMAG-4
4-Round, Short-Action Magazine
(243 Win/308 Win/
7mm-08 Rem/22-250 Rem)
•
90436
AMER-S/ARTMAG-4
5-Round, Short-Action Magazine
(223 Rem)
•
90440
AMER-XTRA S/A
For additional product, safety or service information, please visit RUGER.COM
Three frame screws
identify the “old model”
Single-Six ®, Blackhawk ®,
and Super Blackhawk®
made from 1953 to 1972.
Serial numbers below
93-00000 identify old
Bearcat ® and Super
Bearcat ® models made
from 1958-1972.
Three frame screws identify the “old model” Single-Six®, Blackhawk® and Super Blackhawk® made from 1953 to 1972. Serial numbers below 93-00000 identify old Bearcat® and Super Bearcat®
models made from 1958-1972.
The patented Ruger® Conversion Kit is an entirely new operating system for these revolvers. It can help prevent accidental discharges caused by a drop or blow to the hammer if the
user has failed to take the basic safety precaution of keeping the hammer down on an empty chamber. That’s very important!
This mechanism can be factory-installed without any further alteration. The frame and other major parts will not be affected by this conversion. The value of the gun will not be impaired,
and we will return your original parts for collector’s purposes.
To receive a free factory safety conversion, write to us at Sturm, Ruger and Company, Inc.; 411 Sunapee Street Newport, NH 03773. We will provide you with a shipping container and instructions.
You only pay initial shipping to our factory. We will cover all other charges including return shipping costs. Please write to us without delay if you have one of these guns, and tell your friends about
the availability of this kit. Remember that the safest way to carry any older single-action revolver, regardless of manufacturer, is with the hammer down on an empty chamber.
PLEASE WRITE TO US AT:
Ruger / Conversion Department / 411 Sunapee Street / Newport, NH 03773 or call 603-865-2442
S C O P E R I N G S (P A I R S) :
For full details and a FREE shipping box. If your single-action revolver has the words “New Model,” “Bisley” or “Vaquero” on the frame, this offer is not applicable.
Front/Rear Scope Ring Location
Tube Diameter
Scope Objective
Scope Height
Compatible Firearms
Model No.
High Blued
M77 1'' Ring Set
5B/6B
1''
52MM
High
M77, MKII, M77,
M77RSEXP MKII, M77RMS MK II
90406
Medium Blued
M77 1'' Ring Set
4B/5B
1''
42MM
Medium
M77, MKII, M77,
90410
High Blued M77
30mm Ring Set
5B30/6B30
30MM
52MM
High
M77, MKII, M77,
90407
High Stainless
M77 1'' Ring Set
5K/6K
1''
52MM
High
KM77MKII
90408
High Matte Blued
M77 1'' Ring Set
Medium Matte Blued
M77 1'' Ring Set
5BHM/6BHM
1''
52MM
High
HM77R, HM77RS, HM77RSPHAB
90409
4BHM/5BHM
1''
42MM
Medium
HM77R, HM77RS, HM77RSPHAB
90411
NOTICE: Weights of all Ruger® firearms, and rifles in particular, may vary from published weight because of variations in wood density, bore size, barrel length and style. All weights specified in this
reference guide are approximate. All ammunition that appears in this reference guide is shown actual size only when noted. Sturm, Ruger & Co.,Inc. does not manufacture scopes, optics or lasers. Scopes,
optics and lasers are not included with any firearm purchase unless specifically noted.
All specifications and prices are subject to change without notice. Sturm, Ruger & Co., Inc. reserves the right to change the prices, specifications or availability of its products at any time without notice.
Typographic, photographic and/or descriptive errors are subject to correction. We apologise for any inconvenience.
The following are registered trademarks of Sturm, Ruger & Co., Inc.: 9E; 10/22; 10/22 Takedown; AC-556; All-Weather; Arms Makers For Responsible Citizens; Bearcat; Blackhawk; BX-25; EAGLE R
(Traditional and Hard R Logos); GP100; Hawkeye; LC380; LC9; LC9s; LCP; LCR; M77; Mini-14; Mini Thirty; P345; Power Bedding; Redhawk; RUGER; Ruger 10/22 Takedown logo; Ruger 22/45 Lite; Ruger 77/17;
Ruger 77/22; Ruger 77/44; Ruger American Rifle; Ruger American Rimfire; Ruger Hunting; Ruger Inside & Out; Ruger SP101; Ruger Titanium; Ruger Vaquero; Rugged, Reliable Firearms; Security-Six; Service-Six;
Single-Nine; Single-Six; Single-Ten; Speed-Six; SR Design; SR1911; SR9; SR9c; SR22; SR-22; SR40; SR40c; SR-556; SR-556E; Sturm, Ruger logo; Super Redhawk Alaskan; Target Grey.
The following are trademarks of Sturm, Ruger & Co., Inc.: 10/22-FS; 22 Charger; 22/45; 22/45 RP; 77/357; AR-556; Bisley; BX-15; EAGLE SR; Everything You Need and Nothing You Don’t; Gold Label;
It’s Mine and It’s American; LC6; LCR-357; LCRx; Mark II; Mark III; Match Champion; Model 96; Old Army; P345D; P345PR; P85; P90; P91; P93; P94; P95; P97; Ruger 10/17; Ruger 77/50; Ruger Marksman
Adjustable; Single-Seven; SR45; SR-556c; SR-556VT; SR-762.
* For Connecticut residents only, we will send you a ShopRuger.com gift certificate in lieu of the magazine.
R U G E R.C O M
VERSION I
Ruger is distributed in the U.K. by Viking Arms Ltd
Viking Arms Ltd, Summerbridge, Harrogate, North Yorkshire HG3 4BW
Tel: 01423 780 810
011415
Southport, Connecticut 06890 USA
Email: [email protected]
Ruger.COM

ruger-catalogue-2015

Transcription

Similar documents

kik-step®

Guardian GLHL-SS GLHR-SS

Skate Deterrents

Product sheet BBPE050.4A

chem-veyor

Printable PDF – KE300TH

Teppanyaki Griddles - Royal Range Of California, Inc.

file - Garb-el Products Company

Western Montana Fish and Game Association 100 Anniversary

ISO 9001:2008