Silverado UWS Toolboxes - Vehicle Accessory Center, LLC

Toolbox Systems
Toolboxes that Get the job Done
All toolboxes are not created equal. Designed and engineered to handle up to 250 lbs.* of storage, toolboxes by UWS® and Chevrolet Accessories are
made from commercial-grade aluminum to withstand virtually anything you throw at them or in them.
Single-Lid Deep-Well
Toolbox
The strength and dependability you
rely on and security you count on.
This patented, fully foamed lid creates
a rigid wall that was designed to help
prevent bending or warping. The box and
lid handle heavy loads and withstand
the impact from dropped tools.
Accompanying coated J-hooks protect
your truck from scratches and make for
easy installation.
Low Profile Toolbox
This toolbox is built two inches lower than
other UWS toolboxes, providing a sleeker
look and better view from the rear window
of your truck. Available with a secure
paddle lock.
CHEVROLET Accessories
Stationary Toolbox
Capable of handling several hundred
pounds of storage, this toolbox features a
removable sliding tray and a rubber mat.
The dual gas shocks ensure a smooth
open and close. It’s easy to install,
mounting securely to the truck bed
without the need for drilling.
Gullwing Toolbox
This toolbox combines convenience
and security with half-box access. An
innovative connecting rod enclosure helps
prevent the box contents from bending or
jamming the locking system. With a slight
pull, the self-closing struts automatically
shut the lid and secure the toolbox. Coated
J-hooks provide your truck protection from
scratches and assist in easy installation.
Part #
Part Name
Description
Vehicle
MSRP **
Install Time
Utility Rack Compatibility
19299117
Single-Lid Deep-Well Toolbox by UWS
(Straight edge)
Silver
$469.00
.25 hrs.
Compatible with Steel Utility Racks by TracRac (19299116 and 19299111).
Not compatible with Aluminum Utility Racks by TracRac (19299115, 19299112 and 19299114)
19299118
Single-Lid Deep-Well Toolbox by UWS
(Beveled)
Silver
$469.00
.25 hrs.
Compatible with Steel Utility Racks and Aluminum Utility Racks by TracRac
(19299116, 19299111, 19299115, 19299112 and 19299114)
19260344
Gullwing Toolbox by UWS
Silver
$469.00
.25 hrs.
Compatible with Steel Utility Racks by TracRac (19299116 and 19299111).
Not compatible with Aluminum Utility Racks by TracRac (19299115, 19299112 and 19299114)
19170990
Chevrolet Accessories Stationary Toolbox
Silver
$535.00
.2 hrs.
Compatible with Steel Utility Racks by TracRac (19299116 and 19299111).
Not compatible with Aluminum Utility Racks by TracRac (19299115, 19299112 and 19299114)
19302652
Low Profile Toolbox by UWS
Silver
2007-14
Chevrolet
Silverado
2007-14
Chevrolet
Silverado
2007-14
Chevrolet
Silverado
2007-14
Chevrolet
Silverado
2007-14
Chevrolet
Silverado
$415.00
.25 hrs.
Compatible with Half-Steel Ladder Racks by TracRac (19299111).
Not compatible with Full-Frame Steel or Aluminum Utility Racks by TracRac
(19299116, 19299115, 19299112 and 19299114)
Sourced by
* Cargo and load capacity limited by weight and distribution.
** Manufacturer's Suggested Retail Price. Tax, title, license, dealer fees and other optional equipment extra. Labor and installation charges not included. Price subject to change without notice.
For more information, visit your local Chevrolet Dealer or GMAccessoriesZone.com.
Toolbox Systems
Single-Lid Deep-WELL Toolbox
by UWS®
• Handles up to 250 lbs. of storage
• Patented, fully foamed lid creates a rigid wall
between outer aluminum layers that helps prevent
bending or warping
• Stainless steel lock handles provide strength, security
and rust-free product life
• Connecting rod enclosure helps prevent box contents
from bending or jamming the locking system
• 0.063-inch aluminum one-piece tub and lid support
heavy loads and absorb the impact from tool drops
• With a slight pull, the self-closing struts automatically
shut the lid to secure the box
• MicroSeal™ Stripping helps seal out moisture,
dust and dirt
• A three-compartment built-in tool tray with
screwdriver holder is included
• Lid opens 90° for easy loading and unloading
• Coated J-hooks protect your truck from scratches and
make for easy installation
• Three-year UWS manufacturer’s warranty*
Specifications
Material:
0.063-inch aluminum
Carrying
capacity:
12.5 cu. ft./250 lbs.
Dimensions:
69 inches long x 19.25 inches wide x 19.5 inches tall
(Must not exceed manufacturer-specified vehicle or cargo
capacity rating.)
Low Profile Toolbox BY uws
Gullwing Toolbox by UWS
• Handles up to 250 lbs. of storage
• Built two inches lower than other UWS toolboxes
• Provides a sleeker look and better view from the rear
window of your truck
• Stainless steel lock handles provide strength, security
and a rust-free product life
• Available with a secure paddle lock
• Offered in aluminum
• Three-year UWS manufacturer’s warranty*
• Coated J-hooks protect your truck from scratches and
provide easy installation
• Handles up to 250 lbs. of storage
• Features two single lids for convenient, more secure
half-box access
• Patented, fully foamed lid creates a rigid wall
between outer aluminum layers that helps prevent
bending or warping
• Stainless steel lock handles provide strength, security
and rust-free product life
• 0.063-inch aluminum one-piece tub and lids support
heavy loads and absorb the impact from tool drops
• With a slight pull, the self-closing struts automatically
shut the lids to secure the box
• A three-compartment built-in tool tray with
screwdriver holder is included
• Mounts securely to the truck bed without drilling into
your Silverado
• Coated J-hooks protect your truck from scratches and
provide easy installation
• Three-year UWS manufacturer’s warranty*
Specifications
Material:
0.063-inch aluminum
Carrying
capacity:
8.4 cu. ft./250 lbs.
Dimensions:
69 inches long x 19.25 inches wide x 13.5 inches tall
(Must not exceed manufacturer-specified vehicle or cargo
capacity rating.)
Chevrolet Accessories
stationary Toolbox
• Handles up to 250 lbs. of storage
• Features a removable sliding tray with rubber mat,
dual gas shocks for smooth opening and closing, and
a one-touch latching mechanism
• Mounts securely to the truck bed without drilling into
your Silverado
• Features the Chevrolet logo
• Integrated handle makes it easy to remove and carry
• Three-year/36,000-mile warranty**
Specifications
Material:
0.063-inch aluminum
Carrying
capacity:
8.8 cu. ft./250 lbs.
Dimensions:
69 inches long x 19.25 inches wide x 13.5 inches tall
(Must not exceed manufacturer-specified vehicle or cargo
capacity rating.)
Specifications
Material:
0.075-inch aluminum
Carrying
capacity:
10.5 cu. ft./250 lbs.
Dimensions:
70.2 inches long x 20.6 inches wide x 16.2 inches tall
(Must not exceed manufacturer-specified vehicle or cargo
capacity rating.)
* UWS, a division of Thule, provides a three-year manufacturer’s warranty. For warranty details, call UWS at 800-432-4685. Equipment shown is from an independent supplier and is not covered by the Chevrolet New Vehicle Limited Warranty.
Chevrolet is not responsible for the safety or quality of third-party supplier alterations.
** Most Chevrolet parts and accessories sold and installed on a Chevrolet vehicle by a Chevrolet Dealer or a Chevrolet-approved Accessory Distributor/Installer (ADI) before delivery to the customer are covered under the applicable portion
(Bumper-to-Bumper, Powertrain, etc.) of the New Vehicle Limited Warranty. If Chevrolet Accessories are installed after vehicle delivery, or are replaced under the New Vehicle Limited Warranty, they will be covered, parts and labor, for the
longer of the following: a) 12 months/12,000 miles (whichever comes first), or b) the balance of the applicable portion of the New Vehicle Limited Warranty. See your dealer for details.
Chevrolet Accessories sold over the counter, or those not requiring installation, will continue to receive the standard Chevrolet Dealer Parts Warranty of 12 months from the date of purchase, parts only, regardless of miles.
Some vehicles are shown with equipment from an independent supplier. Chevrolet Licensed and Integrated Business Supplier Accessories are covered under the accessory-specific manufacturer's warranty and are not warranted by
Chevrolet or its dealers. Chevrolet is not responsible for the safety or quality of independent supplier alterations. For installation instructions, please visit AIC and select UWS under the IBP section.
For more information, visit your local Chevrolet Dealer or GMAccessoriesZone.com.
Sourced by