REAR

Transcription

REAR

CONTENTS
PAGE
GUIDE TO SELECTION ………………………….…………….………………………………………………
2
SHOCK ABSORBER & STEERING STABILISER APPLICATIONS ……..……………….………………
3
SUSPENSION APPLICATIONS
CHRYSLER ……………………………...………………………………………………………………………
9
FORD ………………………………….…...……………………………………………………………………
14
HOLDEN / ISUZU / GM …………………………….….………………………………………………………
15
HONDA ……………………………………………...……………………………………………………………
19
HYUNDAI ………………………….………………...…………………………………………………………
19
KIA …………………………………………..……………………………………………………………………
20
LADA NIVA ……………………….………………………………………………………………………………
20
LAND ROVER ………..………………….………………...……………………………………………………
21
MAZDA ………………………………..….………………...……………………………………………………
26
MITSUBISHI ………………………..…….………………...……………………………………………………
27
NISSAN …………………………….…….………………...……………………………………………………
32
SSANGYONG ……………..…………….………………...……………………………………………………
43
SUZUKI ……………………………..…….………………...……………………………………………………
43
TOYOTA ………………………………….………………...……………………………………………………
47
TECHNICAL SPECIFICATIONS
ADDING OR REMOVING AN EXTRA LEAF ………...….……………………………………………………
63
REPLACEMENT MAIN OR 2ND LEAF ……………………………………..………………………………
64
REPLACEMENT CENTRE BOLTS ……………………...……………………………………………………
65
U BOLTS ……………………….…………..……………...……………………………………………………
65
GREASABLE SHACKLES ………………………….…………………………………………………………
66
SUSPENSION FITTING KITS ………………………...………………………………………………………
67
LEAF SPRING TRIM PACKERS …………………….…….…………………………………………………
69
CLIP LINER KITS FOR LEAF SPRINGS …………..…………………………………………………………
69
INTER-LEAF LINER KIT FOR LEAF SPRINGS …………..…………………………………………………
69
LEAF SPRING CENTRE BOLT SLEEVES …..………………………………………………………………
69
DIAGRAM REFERENCE FOR SUSPENSION BUSH KITS ……….……..……..…………………………
70
SUSPENSION BUSH KIT SELECTION …..……....………………………….………………………………
72
SHOCK ABSORBER SPECIFICATIONS …..……..…………………………………………………………
80
SHOCK ABSORBER MOUNT TYPE ……………………………..……..……………………………………
83
LEAF SPRING SPECIFICATIONS ……………………………….....…..……………………………………
84
COIL SPRING SPECIFICATIONS …..…..…..………………….………….…………………………………
86
OLD MAN EMU POLYURETHANE SPRING BUSH DIMENSIONS ……..……..…………………………
89
NUMERICAL SPRING & SHOCK BUSH APPLICATIONS ………..…….…………………………………
90
STEERING STABILISER SPECIFICATIONS …..……..……….………………….…………………………
93
TORSION BAR FITTING HINTS ……..……..………………………..……………..…………………………
94
RECOMMENDED FITTING TIMES …………….…...…..………..……………..……………………………
96
© ARB Corporation Limited, Old Man Emu Division P.O. Box 105 Kilsyth, Vic. 3137 Australia.
All rights reserved. No part of this catalogue may be reproduced or copied in any form or by any means (graphic, electronic or mechanical, including
photocopying, recording, taping or information systems) without the written permission of the publisher.
Supplying all items shown on suspension selection charts will ensure the system can be fitted, however, there will be vehicles which will not
require all items, eg. Trimming kits, caster kits, all U bolts shown, etc. Actual, individual vehicle requirements can only be determined when
the suspension system is fitted.
1
GUIDE TO SELECTION
Terminologies & Explanations
Please note most suspension development has been carried out on Australian specification models.
Therefore, some differences may exist between the same model in another country. Overseas customers will need
to make allowances for these possible differences.
GVM - GROSS VEHICLE MASS: Set by the vehicle manufacturer and is determined by brake, axle, differential and
tyre specifications. Exceeding GVM ratings can have legal and safety implications and is not recommended.
LOAD RATING - FRONT: Weights shown are maximum permissable loads with regard to accessories fitted, eg. Bull
bar, winch, dual battery, etc.
LOAD RATING: The explanations below indicates the passenger and load weights that will provide optimum ride
and handling.
REAR:
LIGHT LOAD: Full passenger load with luggage weights up to 150kg.
MEDIUM LOAD: Full passenger load with luggage weight varying from 200kg to 350kg.
CONSTANT LOAD: The minimum constant load shown on selection chart is required for optimum spring
performance.
Please note: These loads are approximate only. Refer to individual vehicle selection for load specifications.
LIFT HEIGHT: Is shown as a guide only and equates to the amount of lift over the vehicle's original ride height. This
amount can vary from vehicle to vehicle.
OE: Original Equipment, as supplied by the manufacturer of the vehicle.
SHOCK ABSORBERS: Where two part numbers are given for the same application the part with the asterisk (*)
indicates the shock absorber with the firmer ride.
SPRING BUSH: OME polyurethane spring eye bushes on installation must only be greased in the bore and on the
flange area and regularly thereafter with OME polyurethane grease.
STEERING STABILISER: Designed as a larger capacity replacement for the OE part and incorporates 50/50 neutral
valving.
CASTER KIT: The OMECA77B, CALR1 and CALR2 kits consist of 4 eccentric bushes which are pressed into the
leading arms of the vehicle. This will induce positive caster into the front geometry.
LEAF SPRINGS: A & B springs can be used to compensate for uneven vehicle weight distribution. Springs marked
"A" have a greater camber height than springs marked 'B'. 'A' type springs are generally fitted to the driver's side and
'B' springs to the passenger side.
COIL SPRINGS: A & B springs are used to compensate for uneven vehicle weight distribution. 'A' type springs are
generally higher in free high than the 'B' spring. Individual coil specifications are listed in the back of this publication.
GEARBOX PACKER KIT: Designed to space down the gearbox cross member from the chassis to reduce tail shaft
flange angle thereby reducing driveline vibration.
GREASABLE SHACKLES: Replacement for original shackles allow easy regular greasing of polyurethane spring
eye bushes.
TRIM PACKERS: The prime purpose of a trim packer is to correct slight vehicle leaning.
VEHICLES WITH LEAF SPRINGS UNDER SLUNG: Trim packer when fitted will reduce suspension height.
VEHICLES WITH LEAF SPRINGS OVER SLUNG: Trim packer when fitted will increase suspension height.
VEHICLES WITH COIL SPRINGS: Polyurethane trim packer main purpose is to correct slight vehicle
trimming problems and will increase ride height when fitted.
2
OME SHOCK ABSORBERS & STEERING STABILISERS
SHOCK ABSORBER SELECTION ADVICE
Where there is a choice of Nitrocharger part numbers it is important the right selection is made with
consideration given to type of spring rates and customer applications.
Firm Valved Nitrocharger
The firm part number should be selected whenever heavy rate springs are fitted, as the valving has been
specifically developed to control the higher spring rates. The firmer valving will provide better control when
cornering, while also preventing axle bounce over rough roads.
If a softer valved Nitrocharger is fitted with a heavy rate spring the vehicle's rebound handling will be reduced.
This will be evident by axle bounce over rough roads, dipping under braking or cornering and wallowing over
undulating roads.
Soft Valved Nitrochargers
Valved specifically for light to medium rate springs. Most suitable for customers wanting a comfortable ride
and regularly carry light to medium loads. Under full GVM load a slight amount of body roll during cornering
and highway speed manoeuvring can occur.
A CAUTION FOR CUSTOMERS BUYING 4 REPLACEMENT SHOCK ABSORBERS
By the time a customer has decided to replace the old and well used original shock absorbers there is every
chance that the original springs are also ready for replacement.
It should be explained to the customer that if their springs are sagged and tired that this would cause the
shock absorbers to work a lot harder.
Therefore, the life expectancy of the shock absorbers will be considerably shortened and when loaded ride
and handling qualities will also be reduced.
REMEMBER: A good set of shock absorbers will not overcome a bad set of springs.
OME SHOCKS, STRUTS
& CARTRIDGES
YEAR
VEHICLE DESCRIPTION
CHRYSLER JEEP
2002 on
2002 on
98 to 2005
92 to 98
84 on
To 86
74 to 86
To 86
97 on
86 to 96
Cherokee KJ All Models (OE Springs)
Cherokee KJ ALL Models (OME Springs)
Grand Cherokee WJ & WG - Petrol Models
Grand Cherokee ZJ - 6 cylinder
Cherokee XJ - Petrol & Diesel
Cherokee Wagon & J10 Ute (Full Size)
Cherokee W10 & J20 Utes and Cab Chassis
CJ5, 6, 7, & 8
Wrangler TJ
Wrangler YJ
FRONT
REAR
NS130
*NS131/NS130
N13417
N132
N117
*N40/N40C
*N36/N36C
N11113
*N39/N39C
*N35/N35C
STEERING
STABILISERS
FRONT
OMESD4012
OMESD4012
N411
N411
*N41/N811
*N66/N66C
N33
N561
N43
*N56/N54
N676
N34
OMESD4012
OMESD4012
*N18/N57G
*N18/N57G
N26F
OME027
OME027
N41/N81
*N49/N96
N43
N33
N43
*N48/N97
*N48/N97
OMESD31 '86 on
OMESD31 '86 on
NC145
N16
N146
N17
*N53/N53C
*N53/N53C
*N29/N22F
DAIHATSU
92 to 97
88 to 92
93 on
84 to 8/93
84 to 93
All
Feroza II F310
Feroza I F300
Rocky F87 Wide Track
Rocky F70, F75, F80 & F85 Hard Top with Leaf Springs
Rocky F77 & 78 Tray Top with Leaf Springs
Scat Hard Top
FORD
2001 on
To 01
85 on
87 to 93
All
Escape V6
Explorer 4x4 Only
Courier/Ranger Pick Up
Raider Wagon
Maverick Wagon & Hard Top
All
81 to 89
81 to 89
81 to 89
70 to 80
70 to 79
Maverick Ute & Cab Chassis
Bronco (Single I Beam Front End)
Bronco (Dual I Beam Front End)
F100 4x4 & 4x2 (Single I Beam)
F100 4x4 & 4x2 (Twin I Beam)
F250 4x4 & 4x2 (Twin I Beam)
N519
N51
*N21/N23F
N28
N52F
*N52F & N434
N52F
N52F
N52F
3
N25
N423
N423
N423
N55
N55
LTR SHOCKS
To 8/89 OMESD34
9/89 on OMESD36
OMESD22
REAR
OME SHOCKS, STRUTS
& CARTRIDGES
YEAR
VEHICLE DESCRIPTION
FRONT
REAR
N65
N150
*N65/N26F
N65
*N65/N26F
*N65/N26F
*N65/N26F
N26F
OME025
OME015
*N42/N89
*N42/N89
*N42/N89
*N15/N15C
Petrol (OME Springs)
Petrol (OE Springs)
N126S
N125S
N127S
N127S
Terracan V6
Terracan Diesel
Santa Fe V6 Models
N170
N162
NC160
*N172/N171
*N172/N171
OME033
N147S + N148S
N149
*N107/N107C
*N115/N45F
*N115/N45F
*N115/N45F
N78
N78
NC137
N156S/N157S
*N108/N108C
*N44/N46
*N44/N46
*N44/N46
N69
N90
NC138
N158S/N159S
*N41/N811
*N41/N811
NC145
N146
N53
STEERING
STABILISERS
LTR SHOCKS
FRONT
REAR
LTR04F R&L
LTR04R
LTR05F
LTR05R R&L18
HOLDEN/ISUZU
2003 on
2003 on
7/81 to2003
4/92 to 2003
11/86 to 3/92
82 to 10/86
99 on
95 to 98
85 to 87
85 to 87
Rodeo/Isuzu Pick up - Diesel RA Models
Rodeo/Isuzu Pick up - V6 RA Models
Rodeo/Isuzu Pick Up KB4, KBD4 & TFS
Jackaroo/Trooper & Monterey (Isuzu Wagon)
Jackaroo/Trooper
Jackaroo/Trooper
Frontera Wagon
Frontera 2 Door UT
Drover QB (OE Springs)
Drover QB (OME Springs Fitted)
N8820
*N42/N89
N102
N15C
OME023
OME013
OMESD30
OMESD30
HONDA CRV
To 2002
To 2002
HYUNDAI
2001 on
2005 on
2002 on
KIA
2002 on
Sorento V6
LAND ROVER
Discovery Series II (Coil & Air Bag Models)
Discovery Series I
Range Rover (Except Air Bag Models)
Defender & County 90, 110 & 130
Land Rover Series I, II & III (80" & 109")
Land Rover Series II & III (88" SWB)
Freelander All Models
Freelander V6 Wagon
99 to 04
91 to 99
To 5/95
84 on
To 84
To 84
To 10/2000
11/00 to 1/04
MAHINDRA
90 to 93
Bushranger & Stockman CJ340
MAZDA
2001 on
87 on
Tribute V6
B2600 Pick Up All Models
N519
MITSUBISHI
4/00 on
4/00 on
91 to 3/00
91 to 3/00
89 to 5/91
To 4/91
00 on
98 to 00
9/96 on
91 to 8/96
91 to 8/96
86 to 8/96
To 86
To 9/86
Pajero NM & NP (3.2 Diesel)
Pajero NM & NP Wagon & Hard Top (V6)
Pajero (Coil Springs) NH, NJ, NK & NL
Pajero (Leaf Springs) NH, NJ, NK & NL
Pajero (Coil Springs) NF & NG
Pajero (Leaf Springs) NA, NB, NC, ND, NE, NF & NG
Challenger/Montero Sports (Coil Springs)
Challenger/Montero Sports (Leaf Springs)
Triton/L200 MK All Models
Triton V6 (OE Springs)
Triton/L200 (V6) MH & MJ
Triton/L200 (4 Cylinder) ME, MF, MG, MH & MJ
L200 MA, MB, MC & MD
L300 Vans SA, SB, SC & SD
N129S
*N152/N110
*N129S/N109S *N152/N110
N18
N64
N18
*N56/N54
N60G
N62G
N60G
*N56/N54
N57G
N116
N57G
*N56/N54
*N18/N57G
N30 or N30E21
N60G
N89
N60G
N30
N60G
*N89/N95
N60G
*N89/N95
N60G
N89
4
OMESD02
OMESD11
OMESD11
OMESD32
OMESD11
OMESD11
OME SHOCKS, STRUTS
& CARTRIDGES
YEAR
VEHICLE DESCRIPTION
FRONT
REAR
*N19/N19C
*N19/N19C
*N19/N19C
*N19/N19C
*N21/N23F
*N21/N23F
N28
N49
*N47/N96
N49
*N29/N29C7
*N29/N29C7
N25
*N29/N29C7
*N29/N22F
*N29/N22F
N25
*N48/N97
*N48/N97
N49
*N104/N104C
*N61/N61C
NC163
*N42/N89
*N59/N56
*N59/N56
*N41/N81
N30
*N42/N89
STEERING
STABILISERS
LTR SHOCKS
FRONT
REAR
OMESD01
OMESD11
LTR07F
LTR07F
LTR07R7
LTR07R7
OMESD11
OMESD34
OMESD36
OMESD22
OMESD22
OMESD22
OMESD22
LTR07F
LTR02F
LTR02F
LTR07R7
LTR02R
LTR02R
NISSAN
2/00 on
97 to 1/00
97 on
97 on
To 8/89
9/89 on
88 to 7/97
8/83 to 88
80 to 7/83
67 to 79
2/99 to 2005
96 to 1/99
All
86 to 8/95
1/86 to 8/02
10/02 to 2005
1/86 on
All
80 to 85
Patrol Y61 (GU) Series II SWB & Wagon
Patrol Y61 (GU) Series I Wagon & SWB
Patrol Y61 (GU) Cab Chassis (Leaf Spring Rear)
Patrol Y61 (GU) Cab Chassis (All Coil Springs)
Patrol Y60 (GQ) Wagon & SWB
Patrol Y60 (GQ) Wagon, SWB & Cab Chassis
Patrol Y60 (GQ) Ute & Cab Chassis (Leaf Springs)
Patrol MQ Wagon, SWB, Ute & Cab Chassis
Patrol MQ Wagon, SWB, Ute & Cab Chassis
Patrol 60 & G60 Series
Pathfinder R50
Pathfinder R50
X Trail - All Models
Pathfinder/Terrano WD21
Navara D21 & D22 Pick UP
Navara D22
Navara D21 & D22 Pick UP 4x2
Terrano II 4x4 (European Models)
720 Ute & Cab Chassis
N143S+N144S19
N143S+N144S19
NC161
N26F
N585
N1515
*N18/N57G5
N26F
*N18/N57G5
OMESD35
OMESD35 suit D21 Models Only
SUZUKI
2001 on
95 to 2005
7/88 to 2005
7/88 to 2005
All
All
82 to 95
88 to 96
82 to 95
78 to 12/81
78 to 12/81
78 to 12/81
78 to 12/81
74 to 12/81
74 to 12/81
XL7 Wagon V6
Grand Vitara 4 & 6 Cylinder
Vitara TA01 & TD01 & Wagon
Vitara TA012 TD01 SWB
Jimny SN413 (OME Springs)
Jimny SN413 (OE Springs)
Sierra SJ410 & SJ413 Ute MG410 / WT1000cc (OME Springs)
Sierra SJ70, SJ71, SJ413, MG410 / WT1300cc (OME Springs)
Sierra SJ410 & SJ413 (OE Springs)
LJ80 & LJ80V SWB (OME Springs)
LJ80 & LJ80V SWB (OE Springs)
LJ80 Ute (OE Springs)
LJ80 Ute (OME Springs)
540, LJ10, LJ20 & LJ50 (OME Springs)
540, LJ10, LJ20 & LJ50 (OE Springs)
SSANGYONG
Musso
All
N103S11
N103S
N103S
N103S
OME028
OME028
OME015
OME025
OME025
OME015
OME025
OME025
OME015
OME015
OME025
OME03010
OME013
OME013
OME023
N43
N/A
OME023
OME013
OME013
OME023
N65
N118
N153
N105
N105
N32
OME029
OMESD30
OMESD30
TOYOTA
3/98 on
3/98 on
4/90 to 98
4/2003 on
7/96 to 10/02
99 on
85 to 99
All
84 to 90
85 on
All
86 to 3/90
80 to 86
80 to 86
86 to 3/90
To 11/80
To 12/84
To 12/84
To 12/84
LandCruiser 100 Series (IFS)
*N133/N100
*N101/N101C2
LandCruiser 100 & 105 Series (Front Live Axle)
*N73/N70
*N74E/N71E2
LandCruiser 80 Series
*N73/N70
*N74E/N71E2
Prado 120 Series (Except Grande Models)
*N140S/N139S *N142/N141
Prado 95 & KZJ90 Series
*N91S/N91SC
*N86/N86C
LandCruiser 78 & 79 Series
N106
*N75F/N75E2
*N50/N88
*N75F/N75E2
LandCruiser II LJ/RJ70, LJ/KZJ71 & LJ/KZJ78 Models
N77
N79
LandCruiser Bundera, SWB, LJ70 & RJ70 Series
N114
N112&N113
LandCruiser 70,73 & 74 Series
*N50/N88/N92
*N85/N94
LandCruiser HZJ71 & HJZ74 Series
*N106/N106C
N68
LandCruiser 60,61 & 62 Series (Rear Lower Pin 19mm) *N50/N88/N92 *N90/N85/N94
LandCruiser 60 Series (Rear Lower Pin 16mm)
*N50/N88/N92 *N42/N89/N95
LandCruiser 60 Series (OE Springs)
N50
N42
LandCruiser 60 Series (OE Springs)
N50
N90
LandCruiser FJ55
N43
N42
LandCruiser 45 & 47 Series
*N41/N81
*N42/N89
LandCruiser BJ, FJ & HJ 40 & 42 Series All Models
*N41/N81
*N89/N95
LandCruiser BJ, FJ & HJ 40 & 42 Series All Models (OE Springs)
N41
N42
5
OMESD24
OMESD24
OMESD24
OMESD24
OMESD24
OMESD24
OMESD24
OMESD24
OMESD24
OMESD24
OMESD24
OMESD23
OEMSD23
OMESD23
LTR06F
LTR01F
LTR01F
LTR06R R&L14
LTR03R R&L14
LTR01R R&L14
LTR09F
LTR09R R&L
OME SHOCKS, STRUTS
& CARTRIDGES
YEAR
VEHICLE DESCRIPTION
FRONT
TOYOTA (continued)
HiLux KUN26R, GGN25R
2005 on
*N167S/N166S
HiLux LN172, LN167, KZN 165, RZN174 &
9/97 to 04
*N87/N80
RZN169 (IFS)
9/83 to 8/97 HiLux LN65, YN65, LN106 & RN105 (All Leaf Suspension)
*N93/N84
9/83 to 8/97 HiLux LN65, YN65, LN106 & RN105 (OE Springs)
N84
HiLux/4 Runner LN107, RN105, RN110 & LN111 (IFS)
88 to 8/97
N98
HiLux/4 Runner LN107, RN105, RN110 & LN111(IFS)(OE Springs)
88 to 8/97
N98
HiLux LN46 & RN46 (All Leaf) (Rear Lower Pin 16mm)
To 8/83
*N93/N84
HiLux LN46 & RN46 (All Leaf) (Rear Lower Pin 16mm)(OE Springs)
To 8/83
N84
HiLux 4x2 Models
84 to 97
N83
4 Runner LN111 & RN110 (IFS)
88 to 11/97
N98
Blizzard
82 to 83
*N41/N81
Rav 4 Diesel Models (OME)
2002 on
N135S & N136S
Rav 4 Petrol Models (OE Springs)
10/00 on
N121S &124S
Rav 4 Petrol Models (OME Springs)
10/00 on
N119S & N123S
Rav 4 All Models (OE Springs)
94 to 9/00
NC12215
Rav 4 All Models (OME Springs)
94 to 9/00
NC12015
Kijang
97 on
N128
Tacoma V6
To 2004
*N91S/N91SC
VOLKSWAGON
Syncro 4x4
85 to 90
NOTES:
STEERING
STABILISERS
REAR
*N169/N168
*N75&N75E/
N68&N68E8
*N85/N94
*N90/N85
*N85/N94
*N90/N85
*N89/N952
*N42/N89
N54
N72F
N48
OME031
ME032
OME031
OME032
OME031
N56
N85
N38S
LTR SHOCKS
FRONT
OMESD33
LTR08FL/FR LTR08RL/RR16
OMESD21
OMESD21
OMESD33
OMESD21
OMESD21
OMESD33
N37
*first part number has firmer valving.
1.
'83 and on wide track CJ Jeeps require bush kit OMEB27 for the front lower mount and all Cherokee wagons and Mahindra lower front and rear mounts.
2.
Shock lower body stone guards are recommended fitment to rear shocks to protect against severe stone peppering encountered
on loose road surfaces. OME661 (suit LandCruiser 80 & 100 Series only) OME660 (all other models)
3.
'81 on F100 and Bronco require bush kit OMEB27 on bottom rear mount.
4.
Ford dual shocks. N43 fitted in front of N52F.
5.
It may be necessary to slightly increase the clearance in the front wishbone to allow the shock absorber to fit. Do not modify the shock absorber.
6.
FK16 20mm bump stop spacer kit mandatory fitment.
7.
FK18 rear sway bar extension bracket for LWB models and FK24 for SWB models are mandatory fitment with Nitrochargers to prevent damage to sway bar due to
increased wheel droop.
8.
N75E and N68E are 20mm longer and must only be installed to right hand side.
9.
FK22 support brackets must be installed to upper shock mounting brackets on late 96 on models manufactured in Thailand.
10. OME030 is shorter than OME029 and must be used with OE coils to ensure coils remain entrapped.
11. FK28 bump stop spacer kit must be installed with N103S struts.
12. OMESD40 will only fit left hand drive models.
13. To obtain maximum ride quality improvement it is recommended that an OME replacement stabiliser bar (OMESTAB1) be fitted.
14. Fitment of a rear stone flap kit is mandatory to the control arms to prevent stone damage to the shock absorber.
OME662 suits models with 34mm diameter. OME664 suits models with 43mm diameter.
15. NC120 & NC122 are a replaceable insert and a FK23 adaptor kit is required for models from 1/98 to 2000.
16. Fitment of OME663 stone flap kit is mandatory to prevent damage to piston rod from stone peppering.
17. N134 must be installed with OE springs to ensure coil springs remain entrapped on full extension.
18. LTR05R suits early model defenders where the fuel pump is not mounted inside of the right rear mud guard.
19. Models with ABS will require an SMP638 ABS bracket kit.
20. OMEB11 bush kit is required to convert lower 19mm bush to 16mm ID.
21. To prevent possible rear spring inversion the OE shock absorber length must be matched to the closest open length to either N30 or N30E.
Note: Replacement dust boot part numbers: Nitrocharger OME412422, LTR OME 512422
6
REAR
COMPETITION SHOCK & SPRING SELECTION
WARNING
WARRANTY EXCLUSION DISCLAIMER
Due to the unusual component design requirements and the severe nature of competition usage,
the normal Old Man Emu product warranty conditions do not apply to any products listed on this page.
NISSAN PATROL Y60 & Y61 MODELS
COMPETITION SHOCKS AND COIL SPRINGS
Lift
Location
Coil Rate
Coil Length (mm)
A
B
460
445
510
495
75mm
FRONT
REAR
Coil Spring
Part No.
OME412
OME415
100mm
FRONT
REAR
OME413
OME416
250 LBS
290 LBS
485
535
470
520
N19L
N29L
125mm
FRONT
REAR
OME414
OME417
250 LBS
290 LBS
510
560
495
545
N19L
N29L
250 LBS
290 LBS
Shock
Part No.
N19L
N29L
TOYOTA LANDCRUISER 80 & 100 SERIES MODELS
COMPETITION SHOCKS AND COIL SPRINGS
Lift
Location
Coil Rate
Coil Length (mm)
A
B
505
515
480
490
75mm
FRONT
REAR
Coil Spring
Part No.
OME418
OME421
100mm
FRONT
REAR
OME419
OME422
300 LBS
280 LBS
530
505
540
515
N73L
N74L
125mm
FRONT
REAR
OME420
OME423
300 LBS
280 LBS
555
530
565
540
N73L
N74L
300 LBS
280 LBS
Shock
Part No.
N73L
N74L
IMPORTANT:
The products listed in this selection chart are deemed by Old Man Emu to be suitable
only for Off Road use and their legality for public road use should be certified by
the relevant Registration Authority.
Modifications and replacement of other associated components will be required.
Lift increase is approximate and based on standard vehicle weights.
7
COMPETITION SHOCK & SPRING SELECTION
WARNING
WARRANTY EXCLUSION DISCLAIMER
Due to the unusual component design requirements and the severe nature of competition usage,
the normal Old Man Emu product warranty conditions do not apply to any products listed on this page.
Nitrocharger L Series
Vehicle
Jeep XJ
Jeep YJ
Jeep TJ
Jeep ZJ
Patrol Y60, Y61
LandCruiser 80, 100
Front
Open
Closed
Rear
Open
Closed
N35L
N33L
N66L
N39L
N19L
N73L
678
748
678
678
555
667
392
422
392
392
322
381
N36L
N34L
N67L
N40L
N29L
N74L
622
622
622
655
716
673
366
366
366
389
426
387
Selection for individual vehicles depends on:
1. Open and closed length requirements
2. Vehicle front and rear weight distribution
The table below lists suggested selection for various competition vehicle types.
Vehicle Type
Buggies
Front
OME007: 1per side
Baja
OME007: 1 per side
4WD
- Large
- Small
N76: 4 per side
N76: 3 per side
Rear
OME007: 1 per side
= Multiple fitment required
*OME018: 2 per side
OME007: 2 per side
OME018: 2 per side
N76: 2 per side
N76: 2 per side
*HANDLING VARIATION CAN BE CHANGED BY REMOVING ONE SHOCK
Shock Characteristics & Specifications
Part No
OME007
OME018
N76
Top Mount Lower Mount
Large Eye
Large Eye
Large Eye
Large Eye
Large Eye
Large Eye
Open Length
600mm
585mm
680mm
Closed Length
359mm
359mm
408mm
*Characteristic
Compression
Rebound
Rebound
*INDICATES THE PROMINENT VALVING FIRMNESS
Warranty Implications
The fitter selling these shocks must inform the customer there is no warranty due to the severe nature of
competition racing. The fitter must also note on the customer's receipt "racing application no warranty
applies". This will prevent any future misunderstanding.
8
CHRYSLER
JEEP GRAND CHEROKEE WJ & WG
FRONT
Estimated Lift: 40mm
SPRING: TO 40 KGS SHOCK ABSORBER
SPRING: 41 TO 90 KGS SHOCK ABSORBER
TRIM PACKER
STABILISER BAR
REAR
SPRING: MEDIUM LOAD
SHOCK ABSORBER
SPRING: HEAVY LOAD
SHOCK ABSORBER
TRIM PACKER
V6 & V8 PETROL ENGINES
PART NUMBER
QTY
OME935
N111
2
2
2
OME936
N111
OMEWJPF10
OMESTAB1
UNIT
PRICE $
2
1
1
ALL MODELS
PART NUMBER
QTY
OME944
N117
2
UNIT
PRICE $
2
2
OME945
N117
2
OMEWTJPR10
REMARKS:
1
OMESTAB1 is a lighter rate OME replacement stabiliser bar which is a recommended fitment so maximum ride
quality improvement can be obtained (except 2.7 Diesel models).
JEEP GRAND CHEROKEE ZJ ALL MODELS
FRONT
Estimated Lift: 20 - 25mm
COIL PACKER
REAR
SPRING: MEDIUM LOAD
SHOCK ABSORBER
SPRING: CONSTANT 100 KGS
SHOCK ABSORBER
COIL PACKER
V6 & V8 PETROL ENGINES
PART NUMBER
OME931
OME934
*N39 / N39C
OME930
OME934
N39
QTY
1
UNIT
PRICE $
2
2
1
2
2
OMEJGF10
ALL MODELS
PART NUMBER
QTY
OME940
*N40 / 40C
2
OME943
N40
UNIT
PRICE $
2
2
2
OMEJGR10
REMARKS:
1
OME931 and OME930 suit 6 cylinder models. OME934 suits V8 models.
Spring rate restrictions will not allow any higher coil. Additional ride height or trimming needs to 20mm can be
obtained by fitment of 10mm trim packer.
9
CHRYSLER
JEEP CHEROKEE XJ WAGON 1984 ON MODELS
FRONT
SPRING: TO 50 KGS - 45mm
SHOCK ABSORBER
PETROL & DIESEL ENGINES
PART NUMBER
OME930
*N35 / N35C
SPRING: 51 TO 90 KG -35mm
SHOCK ABSORBER
OME930
N35
STEERING DAMPER
OMESD40
REAR
SPRING: LIGHT LOAD
SHOCK ABSORBER
SPRING: MEDIUM LOAD
2
2
3
2
2
5
1
PART NUMBER
CS034RA / B
*N36 / N36C
SHOCK ABSORBER
SPRING BUSH KIT
OE
GEARBOX PACKER KIT
3
UNIT
PRICE $
ALL MODELS
CS035RA / B
N36
U BOLTS
QTY
OMEU60
OMEU57
XJGK01
QTY
2
1+1
2
2
1+1
UNIT
PRICE $
2
1
4
4
1
REMARKS:
1
OMEU60 suits Dana 35 type differential - Australian models. OMEU57 suits AMC 8 1/4 type differential.
2
Trimming requirement greater than 10mm use A/A fitment. Where near level rake is desired B/B fitment should
be used. D22XL extra leaf can be fitted to CS034RA/B and CS035RA/B for heavier constant load carrying ability.
NB: Models fitted with OE Up Country Suspension pack will only be raised by 20mm.
3
OMEJGF10 front coil packer can be used for trimming or extra lift purposes.
4
Fit XJGK01 gearbox packer kit should a driveline vibration occur.
5
OMESD40 will only fit left hand drive models.
JEEP CHEROKEE KJ
FRONT
SPRING: NO ACCESSORIES STRUT
SPRING: TO 50 KGS STRUT
SPRING: 51 TO 100 KGS STRUT
REAR
SPRING: LIGHT LOAD
SHOCK ABSORBER
SPRING: MEDIUM LOAD
SHOCK ABSORBER
PETROL ENGINES
PART NUMBER
QTY
OME925
NS130
2
OME926
NS131
OME927
NS131
UNIT
PRICE $
2
2
ALL MODELS
OME947
N132
2
OME948
N132
2
2
2
10
QTY
OME926
NS130
2
OME927
NS131
2
QTY
PART NUMBER
OME927
NS131
2
2
PART NUMBER
DIESEL ENGINES
UNIT
PRICE $
2
2
2
2
2
UNIT
PRICE $
CHRYSLER
JEEP WRANGLER TJ
FRONT
TRIM PACKER
STEERING DAMPER
6 CYLINDER ENGINE
PART NUMBER
OME932
*N66 / N66C
OME933
N66
OMEJGF10
OMESD40
REAR
SPRING: SOFT TOP
SHOCK ABSORBER
SPRING: HARD TOP
SHOCK ABSORBER
SHOCK ABSORBER
PANHARD ROD BRACKET KIT
TRIM PACKER
GEARBOX PACKER KIT
BUMPER STOP SPACER KIT
QTY
1
2
2
1
2
2
5
1
UNIT
PRICE $
ALL MODELS
PART NUMBER
OME941
N67
OME941
N67
OME942
N67
FKWTJ01
QTY
1
2
1
2
2
1
2
2
UNIT
PRICE $
2
2
1
3
1
1
FKWTJ02
OMEWTJPR10
FK16
4
REMARKS:
1
For ride height and trim adjustment use - Front: OMEJGF10
Rear: OMEWTJPR10
2
FKWTJ01 panhard rod extension bracket kit fitment to right hand drive or FKWTJ02 to left hand drive models is
mandatory to ensure correct rear axle tracking.
3
A Gear box packer kit is mandatory fitment to prevent driveline vibration.
JWGK01 suits all models to 2003.
JWGK02 suits manual models from 2003.
JWGK03 suits auto models from 2003.
4
FK16: Mandatory fitment 20mm bump stop spacer kit to prevent coil springs becoming solid on full compression.
5
11
CHRYSLER
JEEP WRANGLER TJ UNLIMITED 2004 ON MODELS
FRONT
STEERING DAMPER
TRIM PACKER
REAR
Estimated Lift: 50 mm
SPRING:
SHOCK ABSORBER
PANHARD ROD BRACKET KIT
GEARBOX PACKER KIT
SPRING PACKER
BUMPER STOP SPACER KIT
6 CYLINDER ENGINE
PART NUMBER
QTY
OME932
*N66 / N66C
2
2
OME933
N66
2
2
OMESD40
OMEJGF10
UNIT
PRICE $
1
1
ALL MODELS
PART NUMBER
QTY
OME949
N67
2
FKWTJ01
UNIT
PRICE $
2
2
1
JWGK03
4
1
OMEWTJPR10
FK16
3
1
FKWTJ02
REMARKS:
1
OMESD40 only suitable for fitment to left hand drive models.
2
FKWTJ01: Suits right hand drive models only. FKWTJ02: Suits left hand drive models only.
3
FK16: 20mm Bump stop spacer kit is mandatory fitment to prevent coil springs going soil on full compression.
4
JWGK03 gearbox packer kit must be installed in automatic models to prevent driveline vibration.
12
CHRYSLER
JEEP WRANGLER YJ 1986 - 1996 MODELS
FRONT
SHOCK ABSORBER
SHOCK ABSORBER
SPRING BUSH KIT
GEAR BOX PACKER KIT
GREASABLE SHACKLE KIT
STEERING DAMPER
PETROL ENGINES
PART NUMBER
QTY
CS014F
N33
2
2
2
2
JWGK01
1
1
OMEGS11
OMESD40
3
1
1
OMESB87
REAR
2
2
CS014F
N33
OMESB57
UNIT
PRICE $
ALL MODELS
PART NUMBER
QTY
CS036R
N34
2
CS037R
N34
2
UNIT
PRICE $
SPRING: HARD TOP MEDIUM LOAD TO 200 KGS SHOCK ABSORBER
SPRING: SOFT TOP LIGHT LOAD
SHOCK ABSORBER
SPRING BUSH KIT
OMESB57
OMESB87
OMEGS11
2
2
2
2
1
REMARKS:
1
JWGK01 fitment reduces driveline vibration.
2
Use OMESB57 with original shackles. OMESB87 with OMEGS11 greasable shackles.
3
13
FORD
COURIER 1 TONNE 1987 ON ALL MODELS
FRONT
PART NUMBER
TORSION BARS: OVER 50 KGS
SHOCK ABSORBER
FITTING KIT
REAR
SPRING: MEDIUM LOAD
SHOCK ABSORBER
QTY
303005
1
1
N51
FK22
2
2
1
UNIT
PRICE $
ALL MODELS
PART NUMBER
QTY
CS026R
*N53 / N53C
2
CS027R
2
2
SHOCK ABSORBER
U BOLTS
N53
OMEU65
2
4
SPRING BUSH KIT
OMESB82
2
PART NUMBER
QTY
OME904
NC145
2
2
REMARKS:
UNIT
PRICE $
1 Raise or lower front end clearance and
trim vehicle by adjusting front torsion
bars.
2 FK22 support brackets must be
installed to upper front shock mounting
brackets on late 1996 on models
manufactured in Thailand.
FORD ESCAPE V6
FRONT
SPRING:
CARTRIDGE
UNIT
PRICE $
REMARKS:
REAR
SPRING:
SHOCK ABSORBER
PART NUMBER
QTY
OME905
N146
2
1
UNIT
PRICE $
1 The interior trim needs to be removed
to fit rear shock absorbers. Care must
be taken and 3 hours allowed for
removal, or refer to fitting instructions in
N146 showing alternative method.
2
FORD EXPLORER 1996 ON REAR LEAF SPRING MODELS
FRONT
V6 PETROL ENGINE
PART NUMBER
TORSION BARS
SHOCK ABSORBER
N16
QTY
UNIT
PRICE $ REMARKS:
1
1 Raise or lower front end clearance and
trim vehicle by adjusting front torsion
bars.
2
REAR
Estimated Lift: 40 mm
SPRING: MEDIUM LOAD
SHOCK ABSORBER
PART NUMBER
OME36
N17
QTY
2
2
2
14
UNIT
PRICE $
2 OE spring bushes are required to fit
OME36 springs. 36XL extra leaf
should be fitted when a constant 200kg
plus load is carried.
HOLDEN / ISUZU / GM
JACKAROO & MONTEREY 3/2001 TO 2004
SWB & LWB MODELS
FRONT
PART NUMBER
TORSION BARS
SHOCK ABSORBER
*N65 / N26F
QTY
UNIT
PRICE $
1
2
REAR
SPRING: MEDIUM LOAD
SHOCK ABSORBER
SHOCK ABSORBER
PART NUMBER
OME919
*N15 / N15C
QTY
2
UNIT
PRICE $
2
2
2
OME929
N15
2
JACKAROO & MONTEREY 1992 - 2/2001
SWB & LWB MODELS
FRONT
PART NUMBER
TORSION BARS
SHOCK ABSORBER
*N65 / N26F
QTY
UNIT
PRICE $
1
2
REAR
SPRING: MEDIUM LOAD
SHOCK ABSORBER
SHOCK ABSORBER
PART NUMBER
OME912
*N15 / N15C
OME919
N15
QTY
2
UNIT
PRICE $
2
2
2
2
REMARKS:
1
Raise or lower front end clearance and trim vehicle by adjusting front torsion bars.
2
Coil must be installed with progressive rate to the top.
15
HOLDEN / ISUZU / GM
JACKAROO/ISUZU TROOPER 1982 - 3/1992
ALL MODELS
FRONT
PART NUMBER
SHOCK ABSORBER
REAR
SPRING: MEDIUM LOAD
SHOCK ABSORBER
303004
*N65 / N26F
QTY
1
UNIT
PRICE $
1
2
ALL MODELS
PART NUMBER
QTY
CS028R
2
N88
*N42 / N89
2
CS029R
SHOCK ABSORBER
N88
N42
SPRING BUSH KIT
OMESB90
UNIT
PRICE $
2
2
2
2
2
GM FRONTERA 1999 ON 5 DOOR
FRONT
PART NUMBER
TORSION BARS
SHOCK ABSORBER
REAR
SPRING: MEDIUM LOAD
SHOCK ABSORBER
*N65 / N26F
QTY
UNIT
PRICE $
1
2
ALL MODELS
PART NUMBER
QTY
OME913
N102
2
UNIT
PRICE $
2
REMARKS:
1
Torsion Bar 303004 suit models from 8/88 to 3/92 only.
2
N88: Suits 11/'86 to 3/'92 models and requires OMEB11 bush kit to convert lower bush from 19mm to 16mm ID.
N42/N89: Suits models '82 to 10/'86 (no bush kit required).
16
HOLDEN / ISUZU / GM
GM FRONTERA 1995 - 1998
2 DOOR UT MODELS
FRONT
TORSION BARS
SHOCK ABSORBER
PART NUMBER
QTY
N26F
2
REAR
SPRING: MEDIUM LOAD
SHOCK ABSORBER
UNIT
PRICE $
ALL MODELS
PART NUMBER
QTY
OME912
N15C
2
UNIT
PRICE $
2
RODEO RA 2003 ON ALL MODELS
FRONT
PART NUMBER
TORSION BARS
SHOCK ABSORBER
REAR
SPRING: MEDIUM LOAD
SHOCK ABSORBER
QTY
-
1
N65
N150
2
UNIT
PRICE $
2
ALL MODELS
PART NUMBER
QTY
CS024R
*N42 / N89
2
UNIT
PRICE $
2
2
SHOCK ABSORBER
CS025R
N42
SPRING BUSH KIT
OMESB80
2
ANTI INVERSION KIT
FK26
OMEGS13
1
2
1
REMARKS:
1
It has been found, due to vehicle manufacturing tolerances, that in some cases front shock absorbers
may contact the steering arm when on full lock. Fitter should check for this and where required a small
indentation should be made to the body of the shock absorber.
2
Select N65 for diesel engine or N150 for petrol engine models.
17
`
HOLDEN / ISUZU / GM
RODEO TO 2003 ALL MODELS
FRONT
PART NUMBER
SHOCK ABSORBER
303004
*N65 / N26F
REAR
SPRING: MEDIUM LOAD
SHOCK ABSORBER
QTY
1
1
2
ALL MODELS
PART NUMBER
QTY
CS028R
N42
2
CS029R
N42
SPRING BUSH KIT
OMESB80
2
FK14
1
ANTI INVERSION KIT
OMEGS3
OMEU59A
UNIT
PRICE $
`
2
2
SHOCK ABSORBER
U BOLT
UNIT
PRICE $
2
1
2
4
REMARKS:
1
2
Vehicles with 4 Leaf OE Spring Stack require U bolts OMEU59A.
DROVER ALL MODELS
FRONT
SPRING: 35 TO 75 KGS -
PART NUMBER
QTY
CS012FA / B
OME015
1+1
SHOCK ABSORBER
CS013FA / B
OME015
SPRING BUSH KIT
OMESB19
U BOLT
FITTING KIT
TRIM PACKER
STEERING DAMPER
REAR
SPRING: MEDIUM LOAD
SHOCK ABSORBER
OMEU61
2
1+1
2
2
1
4
FK06
1
TP05
OMESD30
1
ALL MODELS
PART NUMBER
QTY
CS038R
OME013
2
UNIT
PRICE $
2
2
SHOCK ABSORBER
CS039R
OME013
SPRING BUSH KIT
OMESB19
2
OMEU61
TP05
4
U BOLT
TRIM PACKER
UNIT
PRICE $
2
REMARKS:
1
1 only OMEU62 may be required on the right hand side inner, on some models.
18
`
HONDA
CR-V TO 2002
FRONT
PART NUMBER
QTY
OME797
N126S
2
SPRING:
STRUT
REAR
UNIT
PRICE $
2
ALL MODELS
PART NUMBER
QTY
OME798
N127S
2
SPRING:
STRUT
UNIT
PRICE $
2
HYUNDAI
SANTA FE V6 2000 ON
FRONT
PART NUMBER
SPRING:
OME907
NC160
CARTRIDGE
REAR
QTY
1
UNIT
PRICE $
2
2
ALL MODELS
PART NUMBER
SPRING:
OME908
OME033
SHOCK ABSORBER
QTY
1
UNIT
PRICE $
2
2
REMARKS:
1
It is recommended that a 4 wheel alignment is carried out.
TERRACAN 2001 ON
FRONT
TORSION BARS
SHOCK ABSORBER
REAR
SPRING: MEDIUM LOAD
SHOCK ABSORBER
SHOCK ABSORBER
PETROL ENGINES
PART NUMBER
N162
QTY
UNIT
PRICE $
2
ALL MODELS
PART NUMBER
QTY
OME603
N171
2
OME604
N172
2
2
2
19
UNIT
PRICE $
DIESEL ENGINES
PART NUMBER
QTY
N170
2
UNIT
PRICE $
KIA
SORENTO 2003 ON ALL MODELS
FRONT
SPRING:
STRUT
REAR
SPRING: LIGHT LOAD
SHOCK ABSORBER
SPRING: MEDIUM LOAD
SHOCK ABSORBER
PART NUMBER
QTY
OME902
N147S + N148S
2
UNIT
PRICE $
1+1
ALL MODELS
PART NUMBER
QTY
OME602
N149
1
OME903
N149
2
2
1
2
UNIT
PRICE $
2
REMARKS:
1
OME661 Stone Guards are recommended fitment to vehicles driven on dirt roads to prevent stone damage to
the shock absorbers.
LADA NIVA
LADA NIVA
FRONT
SPRING:
SHOCK ABSORBER
TRIM PACKER
REAR
SPRING: MEDIUM LOAD
SHOCK ABSORBER
PART NUMBER
QTY
OME791
2
UNIT
PRICE $
NOT AVAILABLE
OMELNF10
ALL MODELS
PART NUMBER
QTY
OME792
NOT AVAILABLE
2
20
UNIT
PRICE $
LAND ROVER
DISCOVERY 1999 TO 2004 ALL COIL SUSPENSION MODELS
FRONT
PART NUMBER
OME776
*N107 / N107C
OME777
*N107 / N107C
SHOCK ABSORBER
OME779
N107
STEERING DAMPER
COIL PACKER
OMESD02
OMELRCP2
REAR
SPRING: MEDIUM LOAD
SHOCK ABSORBER
SHOCK ABSORBER
SHOCK ABSORBER
COIL PACKER
QTY
1
2
1
2
2
1
2
2
UNIT
PRICE $
2
1
2
ALL MODELS
PART NUMBER
QTY
OME781
*N108 / N108C
2
2
2
OME762
N108
2
2
OME763
N108
OMELRCP1
UNIT
PRICE $
2
2
REMARKS:
1
On 2003 models lift will be between 25 to 35mm.
2
8mm Steel Coil Seat Packer, refer to fitting instructions supplied with packer.
Important: To prevent possible over stressing of the spring, only one packer can be fitted under each coil seat.
21
LAND ROVER
DISCOVERY & RANGE ROVER TO 1998
FRONT
Estimated Lift: To 40mm
SHOCK ABSORBER
SHOCK ABSORBER
PETROL ENGINES
PART NUMBER
QTY
OME760
*N115 / N45F
2
OME767
N115
STEERING DAMPER
OMESD11
CASTER KIT
COIL PACKER
REAR
SPRING: MEDIUM LOAD
SHOCK ABSORBER
SHOCK ABSORBER
SHOCK ABSORBER
COIL PACKER
2
2
OME761
*N115 / N45F
SHOCK ABSORBER
1
PART NUMBER
QTY
OME751
*N115 / N45F
2
2
2
OME751
*N115 / N45F
2
2
CALR1
CALR2
OMELRCP1
UNIT
PRICE $
DIESEL ENGINES
2
OME767
N115
1
OMESD11
2
2
2
1
CALR1
1
CALR2
OMELRCP1
2
1
1
2
ALL MODELS
PART NUMBER
QTY
OME764
*N46/N27
2
2
2
OME762
*N44/N46
2
2
OME763
N44
OMELRCP1
UNIT
PRICE $
2
2
REMARKS:
1
CALR1 : Fits pre '86 Range Rover.
CALR2 : Fits post '86 Range Rover, all Discovery & Defender 130 Dual Cab Utility.
NB: Do not fit to automatic Range Rovers or Discovery due to possible vibration problems.
2
22
UNIT
PRICE $
LAND ROVER
DEFENDER & COUNTY 110 MODELS
FRONT
SHOCK ABSORBER
V8 PETROL & 2.5 DIESEL
PART NUMBER
QTY
OME761
N45F
2
SHOCK ABSORBER
OME767
N115
STEERING DAMPER
OMESD32
CASTER KIT
COIL PACKER
REAR
Estimated Lift: To 55 mm
SPRING: LIGHT LOAD - 25mm
SHOCK ABSORBER
SHOCK ABSORBER
SHOCK ABSORBER
COIL PACKER
2
2
CALR1
CALR2
OMELRCP1
UNIT
PRICE $
1
3.9 ISUZU DIESEL ENGINE
PART NUMBER
QTY
OME766
*N115 / N45F
2
2
2
2
OME766
N115
1
OMESD32
1
1
CALR1
1
OMELRCP1
4
UNIT
PRICE $
2
4
ALL MODELS
PART NUMBER
OME752
*N46 / N27
QTY
2
OMELRCP3
2
2
2
OME755
N44
OME754
N44
UNIT
PRICE $
3
2
2
2
4
REMARKS:
1
Caster Kit will increase caster angle by 2 o. Check manufacturer's specifications to determine if caster kit is required.
CALR1 suits 38mm wide control arms. CALR2 suits 44mm wide control arms.
2
OME752 coil has a softer spring than OE coil. This is to provide improved ride quality with light loads only
OE springs are designated as medium load springs.
3
Where original springs have an inner helper coil, be sure to refit helper coil when installing OME coils.
4
23
LAND ROVER
DEFENDER 130 DUAL CAB UTILITY
FRONT
2.5 DIESEL ENGINE
PART NUMBER
QTY
OME761
*N115 / N45F
2
SHOCK ABSORBER
OME751
N115
STEERING DAMPER
OMESD32
CASTER KIT
COIL PACKER
REAR
SPRING: LIGHT LOAD - 25mm
SHOCK ABSORBER
SHOCK ABSORBER
COIL PACKER
CALR2
OMELRCP1
UNIT
PRICE $
2
2
2
1
1
1
3
DIESEL ENGINES
PART NUMBER
OME755
*N44 / N46
QTY
2
2
2
2
OME754
N44
OMELRCP3
UNIT
PRICE $
2
3
REMARKS:
1
CALR1 : Fits pre '86 Range Rover.
CALR2 : Fits post '86 Range Rover, all Discovery & Defender 130 Dual Cab Utility.
NB: Do not fit to automatic Range Rovers or Discovery due to possible vibration problems.
2
Important: OME755 has reduced spring rate from OE to provide improved ride quality for light loads.
3
90 SERIES ALL MODELS
FRONT
PETROL ENGINES
PART NUMBER
QTY
OME761
N45F
2
SHOCK ABSORBER
OME751
N115
STEERING DAMPER
CASTER KIT
OMESD32
CALR1
REAR
SPRING: MEDIUM LOAD
SHOCK ABSORBER
SHOCK ABSORBER
UNIT
PRICE $
PART NUMBER
1
2
OME751
N115
1
1
OMESD32
CALR1
PART NUMBER
QTY
OME764
*N46 / N27
2
2
2
2
24
QTY
OME751
N115
2
2
ALL MODELS
OME762
*N44 / N46
DIESEL ENGINES
UNIT
PRICE $
2
2
2
2
1
1
1
REMARKS:
UNIT
PRICE $
1
Caster kit will increase caster angle by
2o. Check manufacturer's
specifications to determine if caster kit
is required.CALR1 suits 38mm wide
control arms. CALR2 suits 44mm wide
control arms.
LAND ROVER
FREELANDER V6 11/2000 TO 1/2004 WAGON MODELS
FRONT
SPRING:
STRUT
REAR
SPRING:
STRUT
PART NUMBER
OME502
N156S + N157S
QTY
1
UNIT
PRICE $
2
1+1
ALL MODELS
PART NUMBER
OME503
N158S + N159S
QTY
1
UNIT
PRICE $
2
1+1
FREELANDER TO 10/2000 PETROL WAGON MODELS
FRONT
Estimated Lift: Nil
SPRING:
CARTRIDGE
REAR
SPRING:
CARTRIDGE
PART NUMBER
OME504
NC137
QTY
1
UNIT
PRICE $
2
2
ALL MODELS
PART NUMBER
OME505
NC138
QTY
1
UNIT
PRICE $
2
2
FREELANDER TO 10/2000 DIESEL WAGON MODELS
FRONT
Estimated Lift: Nil
SPRING:
CARTRIDGE
REAR
SPRING:
CARTRIDGE
PART NUMBER
OME500
NC137
QTY
1
UNIT
PRICE $
2
2
ALL MODELS
PART NUMBER
OME501
NC138
QTY
1
UNIT
PRICE $
2
2
REMARKS:
1
It is recommended that a 4 wheel alignment is carried out after fitment.
25
MAZDA
1 TONNE 1987 ON ALL MODELS
FRONT
PART NUMBER
SHOCK ABSORBER
FITTING KIT
REAR
SPRING: MEDIUM LOAD
SHOCK ABSORBER
QTY
303005
1
1
N51
FK22
2
2
1
UNIT
PRICE $
ALL MODELS
PART NUMBER
QTY
CS026R
*N53 / N53C
2
CS027R
2
2
SHOCK ABSORBER
U BOLTS
N53
OMUE65
2
4
SPRING BUSH KIT
OMESB82
2
UNIT
PRICE $
REMARKS:
1
2
FK22 support brackets must be installed to upper shock mounting brackets on late 1996 on Thailand
manufactured models.
TRIBUTE V6
FRONT
SPRING:
CARTRIDGE
REAR
SPRING:
SHOCK ABSORBER
PART NUMBER
OME904
NC145
QTY
2
UNIT
PRICE $
2
2
ALL MODELS
PART NUMBER
OME905
N146
QTY
UNIT
PRICE $
2
1
2
REMARKS:
1
The interior trim needs to be removed to fit rear shock absorbers. Care must be taken and 3 hours allowed for
removal, or refer to fitting instructions in N146 showing alternative method.
2
When coil springs are changed a 4 wheel alignment is mandatory.
26
MITSUBISHI
PAJERO NM & NP 2000 ON LWB MODELS
FRONT
REAR
SPRING: MEDIUM LOAD
SHOCK ABSORBER
SHOCK ABSORBER
V6 PETROL ENGINE
PART NUMBER
QTY
OME914
N109S
2
UNIT
PRICE $
2
2
OME915
N129S
2
ALL MODELS
PART NUMBER
OME917
N110
OME918
N152
QTY
1
2
1
2
2
UNIT
PRICE $
2
PAJERO NM & NP 2000 ON LWB MODELS
FRONT
REAR
SPRING: MEDIUM LOAD
SHOCK ABSORBER
SHOCK ABSORBER
2.8 & 3.2 DIESEL ENGINES
PART NUMBER
QTY
OME915
N129S
2
2
2
OME924
N129S
2
ALL MODELS
PART NUMBER
OME917
N110
OME918
N152
QTY
1
2
1
2
2
2
REMARKS:
1
UNIT
PRICE $
It is recommended that a 4 wheel alignment is carried out.
27
UNIT
PRICE $
MITSUBISHI
PAJERO 1991 - 1999 ALL LWB REAR COIL SPRING MODELS
FRONT
PART NUMBER
SHOCK ABSORBER
REAR
SPRING: MEDIUM LOAD
SHOCK ABSORBER
SHOCK ABSORBER
303010
303011
N18
QTY
1
UNIT
PRICE $
1
1
2
ALL MODELS
PART NUMBER
QTY
OME910
N64
2
UNIT
PRICE $
2
2
OME938
N64
2
PAJERO 1991 - 1999 ALL SWB REAR COIL SPRING MODELS
FRONT
PART NUMBER
TORSION BARS
SHOCK ABSORBER
REAR
SPRING: MEDIUM LOAD
SHOCK ABSORBER
N18
QTY
UNIT
PRICE $
1
2
ALL MODELS
PART NUMBER
QTY
OME911
N64
2
UNIT
PRICE $
2
REMARKS:
1
303010 suits all models 91 to 94 with 1278mm length.
303011 suits all models 95 to 00 with 1308mm length.
28
MITSUBISHI
PAJERO 1991 ON
SWB & LWB REAR LEAF SPRING MODELS
FRONT
PART NUMBER
SHOCK ABSORBER
303010
303011
N18
REAR
SPRING: MEDIUM LOAD
SHOCK ABSORBER
QTY
1
UNIT
PRICE $
1
1
2
ALL MODELS
PART NUMBER
QTY
CS022R
*N56 / N54
2
SHOCK ABSORBER
CS023R
N56
SPRING BUSH KIT
OMESB38
UNIT
PRICE $
2
2
2
2
2
PAJERO CHALLENGER 1989 - 1991
REAR COIL SPRING MODELS
FRONT
PART NUMBER
SHOCK ABSORBER
303010
N60G
REAR
SPRING: MEDIUM LOAD
SHOCK ABSORBER
QTY
1
UNIT
PRICE $
1
2
ALL MODELS
PART NUMBER
QTY
OME910
N62G
2
UNIT
PRICE $
2
REMARKS:
1
303009 suits 82 to 90 4 cylinder models - length 1278mm.
303010 suits 88 to 90 V6 models and all models 91 to 94 - length 1278mm.
303011 suits all models 95 to 00 - length 1308mm.
2
OMESB38 must be used to fit OME springs.
29
MITSUBISHI
PAJERO TO 1991 REAR LEAF SPRING MODELS
FRONT
4 CYLINDER ENGINE
PART NUMBER
SHOCK ABSORBER
303009
N60G
REAR
SPRING: MEDIUM LOAD
SHOCK ABSORBER
QTY
UNIT
PRICE $
1
1
2
ALL MODELS
PART NUMBER
QTY
CS022R
*N56 / N54
2
SHOCK ABSORBER
CS023R
N56
SPRING BUSH KIT
U BOLTS
OMESB8
OMEU54
UNIT
PRICE $
2
2
2
2
4
2
3
CHALLENGER 2000 ON LWB COIL REAR MODELS
FRONT
V6 PETROL ENGINE
PART NUMBER
303011
N57G
SHOCK ABSORBER
REAR
SPRING: MEDIUM LOAD
SHOCK ABSORBER
SHOCK ABSORBER
QTY
UNIT
PRICE $
1
1
2
ALL MODELS
PART NUMBER
QTY
OME911
N116
2
OME910
N116
UNIT
PRICE $
2
2
2
REMARKS:
1
303009 suits 82 to 90 4 cylinder models - length 1278mm.
303010 suits 88 to 90 V6 models and all models 91 to 94 - length 1278mm.
303011 suits all models 95 to 00 - length 1308mm.
2
OMESB8 must be used with CS022R and CS023R springs.
3
OMEU54 only required on SWB models.
30
MITSUBISHI
CHALLENGER V6 / MONTERO WAGON
1998 ON (REAR LEAF SPRING MODELS )
FRONT
PART NUMBER
SHOCK ABSORBER
REAR
SPRING: MEDIUM LOAD
SHOCK ABSORBER
303011
N57G
QTY
1
UNIT
PRICE $
1
2
ALL MODELS
PART NUMBER
OME19
*N56 / N54
SHOCK ABSORBER
OME191
N56
SPRING BUSH KIT
OMESB83
QTY
2
2
2
2
2
UNIT
PRICE $
2
2
2
TRITON / L200 ALL MODELS
FRONT
PART NUMBER
SHOCK ABSORBER
REAR
SPRING: MEDIUM LOAD
SHOCK ABSORBER
SHOCK ABSORBER
U BOLTS
SPRING BUSH KIT
QTY
303006
1
1
N60G
*N18 / N57G
3
2
UNIT
PRICE $
ALL MODELS
PART NUMBER
QTY
CS022R
2
2
N30
N30E
3
2
CS023R
2
2
3
2
N30
N30E
OMEU57
OMESB38
UNIT
PRICE $
4
2
2
REMARKS:
1
Torsion Bar 303006 suits 1993 MJ on models with 39 splines.
2
OME springs can only be installed with OME bush kits.
3
MK models require: Front Shock: N18 / N57G
Rear Shock: To prevent possible rear spring inversion the OE shock absorber
length must be matched to the closest open length to either N30 or N30E.
31
NISSAN
PATROL GU Y61 ALL LWB MODELS
FRONT
SPRING: 50 KGS - 20mm LIFT
PETROL 4.5, 4.8 &
DIESEL 4.2
PART NUMBER
QTY
OME970
*N19 / N19C
2
OME972
*N19 / N19C
CASTER KIT
OMECA77B
STEERING DAMPER
TRIM PACKER
REAR
SPRING: MEDIUM LOAD
SHOCK ABSORBER
SHOCK ABSORBER
SPRING: MEDIUM 30mm LIFT
SHOCK ABSORBER
TRIM PACKER
SWAY BAR EXT KIT
OMESD11
5
OMESD01
OMEGQPF05
OMEGQPF10
QTY
2
2
2
OME970
N19
2
2
2
PART NUMBER
OME973
*N19 / N19C
2
2
OME971
N19
SHOCK ABSORBER
UNIT
PRICE $
DIESEL 2.8 & 3.0 TURBO
2
OME974
*N19 / N19C
1
OMECA77B
OMESD11
1
2
2
2
2
1
5
1
OMESD01
OMEGQPF05
OMEGQPF10
1
1
ALL MODELS
PART NUMBER
OME980
*N29 / N29C
OME981
N29
OME982
*N29 / N29C
QTY
4
2
4
2
2
4
2
2
UNIT
PRICE $
2
Do not use Packers
FK18
FK24
3
1
REMARKS:
1
Coil trim packers may be required to trim vehicles.
Packers must be installed to the bottom of front coils.
2
OMECA77B caster kit will increase caster angle by 2 o. Check manufacturer's specifications to determine if
OMECA77B kit is required.
3
FK18: Rear sway bar extension bracket is mandatory fitment to models with fixed sway bar to prevent damage
to sway bar when suspension is at full extension. FK24 suits models with detachable sway bar.
4
Special Note: Due to limited clearance between tailshaft and chassis cross member, OME does not recommend
fitment of gear box packers.
5
OMESD11 steering damper fits all models up to 1/2000. OMESD01 fits 2/2000 models on.
32
UNIT
PRICE $
NISSAN
PATROL GU Y61 CAB CHASSIS
COIL FRONT LEAF REAR MODELS
FRONT
ALL 4.2 DIESEL ENGINES
PART NUMBER
QTY
OME970
*N19 / N19C
2
SHOCK ABSORBER
OME971
N19
STEERING DAMPER
OMESD11
CASTER KIT
TRIM PACKER
REAR
SPRING: MEDIUM LOAD
SHOCK ABSORBER
2
1
2
OMEGQPF05
OMEGQPF10
1
1
ALL MODELS
PART NUMBER
CS016R / A
N25
SHOCK ABSORBER
SPRING BUSH KIT
OMESB64
GREASABLE SHACKLE KITS
2
2
OMECA77B
CS016RA / B
N25
ANTI INVERSION KIT
UNIT
PRICE $
FK08
OMEGS1
OMEGP2
QTY
4
UNIT
PRICE $
1+1
2
1+1
2
2
3
1
1
1
REMARKS:
1
Coil trim packers may be required to trim vehicle to a maximum of 15mm per coil.
Packers must be installed to the bottom on front coils.
2
3
FK08 anti inversion kit is mandatory fitment if greasable shackles are not fitted.
Refer OME Technical & Fitting Manual.
4
For improved ride quality on vehicles carrying medium loads remove the 3rd leaf.
33
NISSAN
PATROL GU Y61 ALL COIL CAB CHASSIS MODELS
FRONT
STEERING DAMPER
CASTER KIT
TRIM PACKER
REAR
SPRING: TO GVM
SHOCK ABSORBER
SHOCK ABSORBER
SHOCK ABSORBER
FITTING KIT
TRIM PACKER
ALL 4.2 DIESEL ENGINES
PART NUMBER
QTY
OME970
*N19 / N19C
2
UNIT
PRICE $
2
2
OME971
N19
2
OMESD11
1
OMECA77B
1
OMEGQPF05
OMEGQPF10
2
1
ALL MODELS
PART NUMBER
QTY
OME983
N29
2
OME984
N29
OME985
N29
3
FK18
Do not use Packers
UNIT
PRICE $
2
2
2
2
2
1
REMARKS:
1
2
Coil trim packers may be required to trim vehicle to a maximum of 15mm.
Packers must be installed to the bottom on front coil.
3
FK18 rear sway bar extension bracket is mandatory fitment to prevent damage
to sway bar when suspension is at full extension.
34
NISSAN
PATROL GU Y61 SWB MODELS
FRONT
TRIM PACKER
STEERING DAMPER
CASTER KIT
OIL PAN PACKER KIT
REAR
SPRING: LIGHT LOAD
SHOCK ABSORBER
SPRING: MEDIUM LOAD
SHOCK ABSORBER
SHOCK ABSORBER
SWAY BAR EXT KIT
GEAR BOX PACKER KIT
TRIM PACKER
2.8 & 3.0 TURBO DIESEL
PART NUMBER
QTY
OME974E
*N19 / N19C
2
UNIT
PRICE $
2
2
OME972E
N19
2
OMEGQPF05
OMEGQPF10
OMESD01
1
1
2
1
1
OMESD11
OMECA77B
FK25
3
ALL MODELS
PART NUMBER
QTY
OMEGQ02A
*N29 / N29C
2
2
2
OMEGQ02B
*N29 / N29C
2
2
OMEGQ02D
N29
FK24
2
4
1
5
1
FK18
GQGK02
UNIT
PRICE $
OMEGQPR05
OMEGQPR10
REMARKS:
1
OMESD01 fits 2/2000 on models.
OMESD11 fits all models to 1/2000.
2
3
FK25 Oil Pan Kit must be fitted when OMECA77B Caster Kit or GQGK02 Gear Box Packer Kit are fitted.
4
FK24 Rear Sway Bar Extension Bracket is a mandatory fitment to vehicle fitted with detachable sway bar.
FK18 suits all models without detachable sway bars.
5
GQGK02 Gear Box Packer Kit is designed to space down the gear box cross member from the chassis to
reduce tail shaft flange angle thereby reducing driveline vibration. In some cases 2 kits may be required.
35
NISSAN
PATROL GQ Y60 LWB MODELS
FRONT
4.2 DIESEL & PETROL ENGINE
PART NUMBER
QTY
OME975
N23F
2
OMEGQPF05
TRIM PACKER
OMESD36
OMESD34
OMECA77B
CASTER KIT
REAR
1
5
1
2
1
ALL MODELS
PART NUMBER
QTY
OMEGQ02C
N22F
2
SPRING: LIGHT LOAD
SHOCK ABSORBER
2
OMEGQPF10
STEERING DAMPER
SHOCK ABSORBER
SPRING: MEDIUM LOAD
2
2
OME974
N21
SHOCK ABSORBER
2
2
OME976
*N21 / N23F
SHOCK ABSORBER
SPRING: 50 KGS - 30mm LIFT
UNIT
PRICE $
2
2
OMEGQ02AM
N22F
2
2
OMEGQ02J
N29
SHOCK ABSORBER
UNIT
PRICE $
2
LPG CONVERSIONS
SPRING: MEDIUM LOAD
OMEGQ02LP
N29
SHOCK ABSORBER
TRIM PACKER
GEAR BOX PACKER KIT
4
Do not use Packers
3
GQGK01
2
2
1
REMARKS:
1
Packers must be installed to the top on rear coils and to the bottom on front coils.
2
3
Gearbox packer kit is designed to space down the gearbox cross member from the chassis to reduce tail shaft
4
LPG conversion equated to 100-125 litre rear mounted gas tank and a 70-75 litre mid mounted auxiliary petrol
tank.
5
OMESD36 fits 8/89 models onwards.
OMESD34 fits pre 8/89 models.
36
NISSAN
PATROL GQ Y60 LWB & SWB MODELS
FRONT
TRIM PACKER
STEERING DAMPER
CASTER KIT
REAR
SPRING: LIGHT LOAD
30MM LIFT
SHOCK ABSORBER
SPRING: MEDIUM LOAD
40MM LIFT
SHOCK ABSORBER
50MM LIFT
SHOCK ABSORBER
3.0 PETROL &
2.8 TURBO DIESEL ENGINES
PART NUMBER
QTY
OME974
N23F
2
2
2
OME972
N21
OMEGQPF05
UNIT
PRICE $
2
1
OMEGQPF10
OMESD36
OMECA77B
2
1
1
ALL MODELS
PART NUMBER
QTY
OMEGQ02CM
2
N22F
2
OMEGQ02C
2
N22F
2
OMEGQ02J
2
N29
2
UNIT
PRICE $
LPG CONVERSIONS
SPRING: MEDIUM LOAD
40MM LIFT
SHOCK ABSORBER
TRIM PACKER
GEAR BOX PACKER KIT
OMEGQ02LP
4
N29
2
2
DO NOT USE
PACKERS
GQGK01
3
1
REMARKS:
1
Packers must be installed to the bottom on front coils.
2
3
4
tank.
37
NISSAN
PATROL GQ Y60 ALL SWB MODELS
FRONT
4.2 PETROL & DIESEL ENGINE
PART NUMBER
QTY
OME975
N23F
2
OMEGQPF05
TRIM PACKER
OMESD36
OMESD34
OMECA77B
CASTER KIT
REAR
SPRING: LIGHT LOAD
SHOCK ABSORBER
SPRING: MEDIUM LOAD
gearbox modification
will be required.
2
1
OMEGQPF10
STEERING DAMPER
raised a maximum of
40mm. GQGK01
2
2
OME974
*N21 / N23F
SHOCK ABSORBER
WARNING:
SWB automatic
models can only be
2
2
OME976
N21
SHOCK ABSORBER
SPRING: 50 KG 30mm LIFT
UNIT
PRICE $
5
1
2
1
ALL MODELS
PART NUMBER
QTY
OMEGQ02CM
N22F
2
SHOCK ABSORBER
SHOCK ABSORBER
UNIT
PRICE $
2
2
OMEGQ02C
N22F
2
2
OMEGQ02G
N29
2
LPG CONVERSIONS
SPRING: MEDIUM LOAD
SHOCK ABSORBER
TRIM PACKER
GEAR BOX PACKER KIT
OMEGQ02LP
N29
OMEGQPR05
OMEGQPR10
GQGK01
4
2
2
1
3
1
REMARKS:
1
Packers must be installed to the top on rear coils and to the bottom on front coils.
2
3
4
tank.
5
OMESD36 fits 8/89 models onwards.
OMESD34 fits pre 8/89 models.
38
NISSAN
PATROL GQ Y60 CAB CHASSIS COIL SPRING MODELS
FRONT
TRIM PACKER
STEERING DAMPER
CASTER KIT
REAR
SPRING: MEDIUM LOAD
40mm LIFT
SHOCK ABSORBER
SHOCK ABSORBER
TRIM PACKER
GEAR BOX PACKER KIT
4.2 PETROL & DIESEL ENGINE
PART NUMBER
QTY
OME975
N23F
2
1 Coil trim packers may be required to
trim vehicle to a maximum of 15mm per
coil. Packers must be installed to the
top on rear coils and to the bottom on
front coils.
2
2
OME976
N21
OMEGQPF05
UNIT
PRICE $
REMARKS:
2
2
1
1
OMECA77B caster kit will increase caster
angle by 2o. Check manufacturer's
specifications to determine if OMECA77B is
required.
3
Gearbox packer kit is designed to space
down the gearbox cross member from the
chassis to reduce tail shaft flange angle
thereby reducing driveline vibration.
1
OMEGQPF10
OMESD36
OMECA77B
2
ALL MODELS
PART NUMBER
QTY
OMEGQ02C
2
N22F
2
2
OMEGQ02J
N29
OMEGQPR05
OMEGQPR10
GQGK01
UNIT
PRICE $
2
1
3
1
PATROL GQ Y60 UTE & CAB CHASSIS LEAF SPRING MODELS
FRONT
PART NUMBER
CS003F
N28
SHOCK ABSORBER
CS004F
N28
SPRING BUSH KIT
OMESB1
STEERING DAMPER
QTY
1
2
1
2
2
UNIT
REMARKS:
PRICE $
1 CBS02 x 2 centre bolt spacers required for
front spring fitment.
2 FK08 Anti Inversion Kit is mandatory
2
fitment if greasable shackles are not fitted.
2
1
OMEGS2
OMEGP2
OMESD22
1
3 For improved ride quality on vehicles
1
carrying medium loads remove the 3rd leaf.
REAR
SHOCK ABSORBER
ALL MODELS
PART NUMBER
CS016RA / B
N25
SHOCK ABSORBER
CS016RA / B
N25
SPRING BUSH KIT
OMESB64
U BOLT
ANTI INVERSION KIT
QTY
3
1+1
2
1+1
2
OMEGS1
2
1
OMEGP2
1
OMEU58B
FK08
2
4
1
39
UNIT
PRICE $
NISSAN
PATROL MQ M60 ALL MODELS
FRONT
PETROL ENGINES
PART NUMBER
CS010FA / B
1
EARLY *N47 / N96
LATE
N49
CS011FA / B
1
EARLY *N47 / N96
LATE
N49
OMESB28
SPRING BUSH KIT
OMESB31
2
2
OMESB29
OMEU56
U BOLT
4
OMEU57
OMESD22
STEERING DAMPER
REAR
UNIT
PRICE $
PART NUMBER
1+1
CS010FA / B
2
EARLY *N47 / N96
LATE
N49
1+1
CS011FA / B
EARLY
LATE
2
OMESB29
SPRING BUSH KIT
QTY
DIESEL ENGINES
1
1
OMESB31
2
2
2
2
OMESB29
2
OMEU56
2
1
OMEU57
OMESD22
1+1
2
OMESB29
2
1+1
2
N47
N49
OMESB28
2
QTY
4
2
2
1
ALL MODELS
PART NUMBER
QTY
CS011R
N97
2
SPRING: MEDIUM LOAD
SHOCK ABSORBER
SHOCK ABSORBER
SPRING BUSH KIT
U BOLT
2
2
CS012R
N48
OMESB2
UNIT
PRICE $
2
3
OMESB29
OMEU58
2
4
REMARKS:
1
Models with P40 4 litre engine require CS011FA / B springs.
Individual vehicles fitted with A / B fitment may experience a pronounced trimming problem to right hand side.
In these cases fitment of an XL leaf to the right hand side will correct problem.
2
Front spring bushes:
Early model (round headlight) require
OMESB28 and OMESB29.
Late model (square headlight) require
OMESB31 and OMESB29
3
OME bush kits must be used to enable springs to be fitted.
4
Front U bolt : OMEU56 fits to right hand side.
OMEU57 fits to left hand side.
40
UNIT
PRICE $
NISSAN
NAVARA D22 10/2002 - 08/2005 ALL MODELS
FRONT
SHOCK ABSORBER
REAR
SPRING: MEDIUM LOAD
SHOCK ABSORBER
SHOCK ABSORBER
SPRING BUSH KIT
U BOLT
PART NUMBER
303007
N151
QTY
1
2
UNIT
PRICE $
1
2
ALL MODELS
PART NUMBER
QTY
CS032R
N56
CS031R
N59
OMESB91
OMEU63
2
2
2
2
2
4
UNIT
PRICE $
NAVARA D21 & D22 PICK UP TO 8/2002 ALL MODELS
FRONT
SHOCK ABSORBER
STEERING DAMPER
REAR
SPRING: MEDIUM LOAD
SHOCK ABSORBER
SHOCK ABSORBER
SPRING BUSH KIT
U BOLT
PART NUMBER
303007
303008
N58
OMESD35
QTY
1
1
2
2
1
UNIT
PRICE $
ALL MODELS
PART NUMBER
QTY
CS030R
N56
CS031R
N59
OMESB81
OMEU63
2
2
2
2
2
4
UNIT
PRICE $
PATHFINDER R50 1996 TO 2005 V6 MODELS
FRONT
SPRING: NO ACCESSORIES
SPRING: TO 50 KGS SPRING: 51 TO 100 KGS STRUT
FITTING KIT
REAR
SPRING: MEDIUM LOAD
SHOCK ABSORBER
V6 MODELS
PART NUMBER
QTY
OME921
OME923
OME928
N143S + N144S
SMP638
2
2
2
1+1
1
4
UNIT
PRICE $
ALL MODELS
PART NUMBER
QTY
OME922
*N61 / N61C
*N104 / N104C
2
3
UNIT
PRICE $
2
REMARKS:
1
303007 suits D22 & 303008 suits D21 models.
2
It may be necessary to slightly increase the clearance in the front wishbone to allow shock absorber to fit.
Do not modify shock absorber.
3
*N61 / N61C: Suit models to 1/'99. *N104 / N104C: Suit models from 2/'99 on.
4
Vehicles with ABS will require a SMP638 ABS bracket kit. N143S Right hand side x 1. N144S Left hand side x 1.
41
NISSAN
PATHFINDER TO LATE 1995 ALL MODELS
FRONT
PART NUMBER
TORSION BARS
SHOCK ABSORBER
STEERING DAMPER
-
1
N26F
OMESD35
2
REAR
SPRING: MEDIUM LOAD
SHOCK ABSORBER
QTY
UNIT
PRICE $
2
1
ALL MODELS
PART NUMBER
QTY
OME920
*N42 / N89
2
UNIT
PRICE $
2
X-TRAIL ALL MODELS
FRONT
SPRING: TO 20 KGS CARTRIDGE
REAR
SPRING: MEDIUM LOAD
CARTRIDGE
PART NUMBER
QTY
OME506
NC161
2
UNIT
PRICE $
2
ALL MODELS
PART NUMBER
QTY
OME508
NC163
2
UNIT
PRICE $
2
TERRANO II
FRONT
PETROL ENGINES
PART NUMBER
TORSION BARS
SHOCK ABSORBER
REAR
SPRING: MEDIUM LOAD
SHOCK ABSORBER
*N65 / N26F
QTY
UNIT
PRICE $
1
2
ALL MODELS
PART NUMBER
QTY
OME920
N30
2
UNIT
PRICE $
2
REMARKS:
1
2
It may be necessary to slightly increase the clearance in the front wishbone to allow shock absorber to fit.
Do not modify shock absorber.
42
SSANGYONG
MUSSO TO 2000 ALL WAGON MODELS
FRONT
TORSION BARS
SHOCK ABSORBER
REAR
SPRING: MEDIUM LOAD
SHOCK ABSORBER
PART NUMBER
QTY
N65
2
UNIT
PRICE $
ALL MODELS
PART NUMBER
QTY
OME937
N118
2
UNIT
PRICE $
2
SUZUKI
XL7 V6 2001 ON WAGON MODELS
FRONT
SPRING: NO ACCESSORIES
STRUT
BUMP STOP SPACER KIT
REAR
SPRING: MEDIUM LOAD
SHOCK ABSORBER
PART NUMBER
QTY
OME956
N103S
FK28
UNIT
PRICE $ REMARKS:
2
1
1
1
2
1
ALL MODELS
PART NUMBER
QTY
OME968
N153
2
UNIT
PRICE $
2
GRAND VITARA
FRONT
REAR
SPRING: MEDIUM LOAD
SHOCK ABSORBER
4 & 6 CYLINDER ENGINES
PART NUMBER
QTY
OME959
N103S
2
OME962
N103S
UNIT
PRICE $
2
2
2
ALL MODELS
PART NUMBER
QTY
OME961
N105
2
2
43
UNIT
PRICE $
FK28 bump stop spacer kit is a
mandatory fitment with N103S Struts.
SUZUKI
VITARA LWB WAGON MODELS
FRONT
REAR
SPRING: LIGHT LOAD
SHOCK ABSORBER
SPRING: MEDIUM LOAD
SHOCK ABSORBER
V6 PETROL ENGINE
PART NUMBER
QTY
OME950
N103S
2
OME959
N103S
UNIT
PRICE $
2
2
2
ALL MODELS
PART NUMBER
QTY
OME954
N105
2
OME955
N105
UNIT
PRICE $
2
2
2
VITARA LWB WAGON MODELS
FRONT
REAR
SPRING: LIGHT LOAD
SHOCK ABSORBER
SPRING: MEDIUM LOAD
SHOCK ABSORBER
4 CYLINDER PETROL ENGINE
PART NUMBER
QTY
OME960
N103S
2
OME953
N103S
UNIT
PRICE $
2
2
2
ALL MODELS
PART NUMBER
QTY
OME954
N105
2
OME955
N105
2
2
2
44
UNIT
PRICE $
SUZUKI
VITARA SWB MODELS
FRONT
PART NUMBER
QTY
OME951
N103S
2
SPRING: MEDIUM LOAD
SHOCK ABSORBER
2
1
ALL MODELS
REAR
UNIT
PRICE $
PART NUMBER
OME952
N32
QTY
UNIT
PRICE $
2
2
2
REMARKS:
1
Front strut has 40mm longer travel than original equipment.
2
Rear shock has 50mm longer travel than original equipment.
JIMNY SN413 MODELS
FRONT
TRIM PACKER
REAR
SPRING:
SHOCK ABSORBER
TRIM PACKER
PART NUMBER
QTY
OME963
OME028
2
UNIT
PRICE $
2
2
OME965
OME028
2
OMESJF10
ALL MODELS
PART NUMBER
OME966
OME967
OME029
OMESJR10
QTY
1
UNIT
PRICE $
2
2
REMARKS:
1
OME966 suits Japanese built models with a 20mm higher right hand side coil.
OME967 suits European built models with equal height coils.
45
SUZUKI
SIERRA ALL LEAF SPRING MODELS (SJ413)
STD TRACK : 1984 - 1988
SJ50 SWB
SJ51 LWB
WIDE TRACK : 1988 - 1996
SJ70 SWB (also fits MG410)
SJ71 LWB
(also fits MG410WT)
Note: MG410 & MG10WT are Indian built LWB models.
1.0 LITRE
FRONT
SPRING BUSH
U BOLT
PART NUMBER
CS012FA / B
OME015
CS013FA / B
OME025
OMESB19
TRIM PACKER
STEERING DAMPER
5
1+1
5
2
1+1
1
3
FK06
4
TP05
OMESD30
CS013FA / B
OME034
OMESB19
2
1+1
2
1
2
4
1
FK06
4
1
1
TP05
OMESD30
2
SHOCK ABSORBER
OME013
N43
CS039R
SHOCK ABSORBER
OME013
N43
Required
TP05
5
3
CS038R
UNIT
PRICE $
2
2
2
2
1
2
3
4
OMESB25
1+1
Required
SPRING: MEDIUM LOAD
OMESB19
5
OMESB25
ALL MODELS
2
QTY
4
QTY
U BOLT
TRIM PACKER
PART NUMBER
CS012FA / B
OME034
2
PART NUMBER
SPRING BUSH KIT
UNIT
PRICE $
2
Required
REAR
QTY
OMESB25
FITTING KIT
1.3 LITRE
REMARKS:
1
OMESB19 bush kit fits all models except LJ50. OMESB25 bush kit only fits model LJ50.
2
OME013 fits all models except LJ80 and LJ80 II. N43 fits all LJ80 and LJ80 II models.
3
88 to '96 1300cc Wide Track Models:
Front: D/S OMEU61 x 1, OMEU61B x 1
Rear: OMEU60 x 4
P/S OMEU60 x 2
84 to '88 1300cc STD Track Models:
Rear: OMEU62 x 4
P/S OMEU62 x 2
81 to '87 1000cc Models:
Rear: OMEU60 x 4
P/S OMEU60 x 2
4
FK06 kit for stabiliser bar. Refer OME Technical & Fitting Manual.
5
IMPORTANT: Sierras used in extreme heavy off road use eg. Station mustering
must have CS013FA + B installed.
46
1
UNIT
PRICE $
TOYOTA
LANDCRUISER 100 SERIES
INDEPENDENT FRONT SUSPENSION MODELS
FRONT
PART NUMBER
303001
QTY
1
1
5
2
1
303002
UNIT
PRICE $
SHOCK ABSORBER
FITTING KIT
*N133 / N100
FK27
REAR
ALL MODELS 10/2000 ON
SPRING: MEDIUM LOAD
SHOCK ABSORBER
SHOCK ABSORBER
SHOCK ABSORBER
SPRING: MEDIUM LOAD
SHOCK ABSORBER
TRIM PACKER
STONE GUARD KIT
REAR
SPRING: MEDIUM LOAD
SHOCK ABSORBER
SHOCK ABSORBER
TRIM PACKER
STONE GUARD KIT
PART NUMBER
QTY
OME860
*N101 / N101C
2
2
2
OME863
N101
2
2
OME864
N101
OME866
OME862
*N101 / N101C
UNIT
PRICE $
2
4
2
2
OME80PR05
OME80PR10
OME661
3
1
10/98 TO 2000 V8 MODELS
PART NUMBER
QTY
OME865
*N101 / N101C
2
2
2
OME866
N101
OME80PR05
OME80PR10
OME661
UNIT
PRICE $
2
2
2
3
1
REMARKS:
1
It is important that a minimum of 60mm of droop is maintained to prevent topping out of the front shock absorbers.
303001 suits V8 models, 303002 suits Turbo Diesel models.
2
Packers must be installed on top of coils.
3
OME661 or OME662 (suits 40mm diameter control arms) lower shock mount stone guard is recommended
fitment to rear shocks to protect against severe stone peppering encountered on loose road surfaces.
4
Original rear rake is 60mm approximately with OE coil rates of 145lbs/in or 25.5N/mm.
Customers wishing to lower the rear height but increase the load carrying ability can select from:
OME866 - Reduces OE height by 10mm (rates 240 - 300lbs/in, 42 - 52.5N/mm).
OME862 - Reduces OE height by 30mm (rates 240lbs/in, 42N/mm).
5
Due to the common problem of the lower control arm cracking when driven under hard conditions, the fitment
of a FK27 lower control arm reinforcing bracket kit is strongly recommended.
47
TOYOTA
LANDCRUISER 100 SERIES & 80 SERIES WAGONS
LIVE AXLE FRONT SUSPENSION MODELS
FRONT
SPRING: 210KGS-10mm LIFT
SHOCK ABSORBER
TRIM PACKER
STEERING DAMPER
CASTER KIT
REAR
SPRING: MEDIUM LOAD
SHOCK ABSORBER
SHOCK ABSORBER
SHOCK ABSORBER
SHOCK ABSORBER
SPRING: MEDIUM 20mm LIFT
SHOCK ABSORBER
TRIM PACKER
STONE GUARD KIT
REAR
SPRING: MEDIUM LOAD
SHOCK ABSORBER
SHOCK ABSORBER
TRIM PACKER
STONE GUARD KIT
PART NUMBER
OME851
*N73 / N70
OME850
N73
OME861
N73
OME80PF05
QTY
1
2
1
2
2
1
2
2
UNIT
PRICE $
2
3
OME80PF10
OMESD24
OMECA77B
2
1
1
ALL MODELS
PART NUMBER
OME860
*N74E / N71E
OME863
N74E
OME864
N74E
OME868
N74E
OME862
*N74E / N71E
OME80PR05
OME80PR10
OME661
QTY
1
2
1
2
2
1
2
2
1
2
2
1
2
2
UNIT
PRICE $
2
3
4
1
LPG CONVERSION
PART NUMBER
OME860
*N74E / N71E
OME863
N74E
OME80PR05
OME80PR10
OME661
QTY
1
2
1
2
2
UNIT
PRICE $
2
3
4
1
REMARKS:
1
For models built from 8/91 add 20mm to lift height shown which is based on average for petrol and diesel engines.
2
3
Packers must be installed on the top of Coil Springs.
4
OME662 or OME661 Lower shock mount stone guard is recommended fitment to protect against severe
stone peppering encountered on loose road surfaces. OME662 will only fit models with 40mm diameter control arms.
48
TOYOTA
PRADO 4/2003 ON ALL LWB MODELS
(EXCEPT GRANDE MODELS)
FRONT
TRIM PACKER
REAR
SPRING: MEDIUM LOAD
SHOCK ABSORBER
SPRING: 150 KGS - 400 KGS
PART NUMBER
OME883
N139S
OME884
N140S
OME885
N140S
QTY
1
2
1
2
2
1
2
2
2
OME95PF5
ALL MODELS
PART NUMBER
QTY
OME895
N141
UNIT
PRICE $
2
2
2
2
N142
2
2
2
SHOCK ABSORBER
OME897
N142
2
2
STONE GUARD KIT
OME661
SHOCK ABSORBER
UNIT
PRICE $
OME896
1
PRADO TO 10/2002 LWB MODELS
FRONT
TRIM PACKER
REAR
SPRING: MEDIUM LOAD
SHOCK ABSORBER
SHOCK ABSORBER
SHOCK ABSORBER
TRIM PACKER
STONE GUARD KIT
V6 PETROL ENGINES
PART NUMBER
OME880
N91SC
OME881
N91S
QTY
1
2
1
2
2
UNIT
PRICE $
DIESEL ENGINES
PART NUMBER
OME881
N91SC
OME882
N91S
2
OME95PF5
QTY
1
2
1
2
2
OME95PF5
ALL MODELS
PART NUMBER
QTY
OME890
N86 / N86C
2
OME891
N86
2
2
2
OME892
N86
2
2
2
2
UNIT
PRICE $
2
OME80PR05
OME80PR10
OME661
1
REMARKS:
1
To maintain front strut droop it is important front coils are selected as shown.
2
OME661 lower shock mount stone guard is recommended fitment to rear shocks to protect against severe
stone peppering encountered on loose road surfaces.
49
2
UNIT
PRICE $
TOYOTA
LANDCRUISER 78 & 79 SERIES
FRONT
PART NUMBER
QTY
OME856
N106
2
UNIT
PRICE $
2
2
SHOCK ABSORBER
OME859
N106
STEERING DAMPER
CASTER KIT
OMESD24
OMECA77B
REAR
79 SERIES SINGLE CAB
SPRING: RIDE / LIGHT LOAD
SHOCK ABSORBER
U BOLT
SHOCK ABSORBER
SHOCK ABSORBER
SHOCK ABSORBER
SPRING BUSH KIT
FITTING KIT
2
1
1
1
PART NUMBER
QTY
OME49
UNIT
PRICE $
78 SERIES TROOP CARRIER
PART NUMBER
QTY
2
OME49
2
N75E
-
2
N75E
OMEU59A
CS013R
*N75F / N75E
2
CS013R
*N75F / N75E
2
4
2
2
2
CS014R
N75F
2
2
CS015R
N75F
OMESB84
2
2
OMESB85
OMEGS10
OMEGP7
FK01
3
2
2
2
CS014R
N75F
2
2
CS015R
N75F
OMESB86
2
2
OMESB85
1
OMEGS10
1
1
OMEGP7
FK01
2
1
3
1
1
REMARKS:
1
2
There is a difference between the shackles on single cab models and Troop Carrier models.
Be sure to select OME bush kits carefully:
OMESB84: Use for all single cab models when original shackles & pins are used.
OMESB85: Use for all models when installing OME greasable shackles & pins.
OMESB86: Use for Troop Carrier models when original shackles & pins are used.
3
The OME spring stack heights are less than the original springs, therefore FK01 spacer kit is required so
original U bolts can be reused.
50
UNIT
PRICE $
TOYOTA
LANDCRUISER 75 SERIES ALL MODELS
FRONT
PETROL ENGINES
PART NUMBER
CS006F
*N88 / N92
QTY
1
UNIT
PRICE $
PART NUMBER
QTY
CS006F
*N88 / N92
2
2
2
CS006F
*N50 / N88
DIESEL ENGINES
2
2
2
CS007F
*N50 / N88
2
2
U BOLT
OMEU51
4
OMEU51
4
SPRING BUSH KIT
OMESB1
2
1
OMESB1
2
1
OMEGS2
STEERING DAMPER
OMEGP1
OMESD24
ANTI INVERSION KIT
FK08
REAR
SPRING: MEDIUM LOAD
SHOCK ABSORBER
SHOCK ABSORBER
SHOCK ABSORBER
1
OMEGP1
OMESD24
1
FK08
1
2
PART NUMBER
OME39
N75E
QTY
4
1
2
1
2
2
CS006R
*N75F / N75E
2
2
CS007R
N75F
2
2
SPRING BUSH KIT
OMESB16
2
U BOLT
OMEU59B
4
1
OMEGS1
OMEGP2
FK08
UNIT
PRICE $
2
CS008R
N75F
ANTI INVERSION KIT
1
ALL MODELS
SHOCK ABSORBER
OMEGS2
2
3
2
1
1
REMARKS:
1
Vehicles with no front accessory weight will require the removal of the 4th leaf from the top of the spring stack.
This is to maintain good shackle angle by not allowing the bump stop measurement to exceed 100mm.
2
Shackles: FK08 anti inversion kit is mandatory fitment front and rear if greasable shackles are not fitted.
Note: Spring Caster Wedge OMECW2 (2 o Caster Wedges) may be required to restore positive caster angle.
Front end alignment check will indicate required adjustment.
3
There can be 2 spigot sizes in the rear fixed end pins on 75 Series LandCruisers.
Check for correct size before ordering greasable pins. Part numbers are:
50mm spigot = OMEGP2.
51mm spigot = OMEGP4.
4
OME39 is a ride quality light load spring that has an additional 25mm of travel in the primary stage (compared
to CS006R) before the second stage is engaged.
51
UNIT
PRICE $
TOYOTA
LANDCRUISER HZJ71 & HZJ74 SWB & MWB MODELS
FRONT
DIESEL 4.2 ENGINES
PART NUMBER
QTY
OME856
*N106 / N106C
2
SHOCK ABSORBER
OME859
N106
STEERING DAMPER
CASTER KIT
OMESD24
OMECA77B
REAR
SPRING: MEDIUM LOAD
SHOCK ABSORBER
UNIT
PRICE $
2
2
2
1
1
1
ALL MODELS
PART NUMBER
CS017RB
N68
SHOCK ABSORBER
CS004RB
N75
SPRING BUSH KIT
OMESB93
U BOLT
OMEU59A
OMEGS10
OMEGP7
QTY
2
2
2
2
2
UNIT
PRICE $
2
3
2
4
1
1
REMARKS:
1
2
If rear bump stop measurements exceed 150mm remove 3rd leaf.
3
OME greasable shackles OMEGS10 & OMEGP7 are mandatory fitment. OE shackles cannot be used.
LANDCRUISER II LJ / RJ70
FRONT
REAR
SPRING: MEDIUM LOAD
SHOCK ABSORBER
SHOCK ABSORBER
PART NUMBER
QTY
OME872
N77
2
OME874
N77
UNIT
PRICE $
2
2
2
ALL MODELS
PART NUMBER
QTY
OME873
N79
2
OME875
N79
2
2
2
52
UNIT
PRICE $
TOYOTA
BUNDERA RJ70
FRONT
REAR
SPRING: MEDIUM LOAD
SHOCK ABSORBER
PART NUMBER
QTY
OME870
N114
2
UNIT
PRICE $
2
2
OME876
N114
2
ALL MODELS
PART NUMBER
QTY
OME871
2
N112
N113
1
1
UNIT
PRICE $
REMARKS:
1
N112 fits left hand side.
N113 fits right hand side.
1
LANDCRUISER 70, 73, 74 SERIES
SWB & MWB ALL MODELS
FRONT
PART NUMBER
CS006F
*N88 / N92
SHOCK ABSORBER
CS006F
N88
U BOLT
OMEU51
STEERING DAMPER
ANTI INVERSION KIT
REAR
SPRING: MEDIUM LOAD
SHOCK ABSORBER
QTY
1
2
2
2
2
OMEGS2
4
1
OMEGP1
1
OMESD24
FK08
3
1
1
ALL MODELS
PART NUMBER
QTY
CS017RA / B
N85
1+1
SHOCK ABSORBER
SPRING BUSH KIT
OMESB1
2
OMEU59A
4
1
ANTI INVERSION KIT
2
2
OMEGS2
GSP01
FK08
UNIT
PRICE $
2
1+1
CS004RA / B
N85
U BOLT
UNIT
PRICE $
3
1
1
REMARKS:
1
Vehicles with no front accessory weight will require the removal of the 4th leaf from the top of the spring stack.
2
If bump stop measurement exceeds 150 - 160mm remove 3rd leaf from top of spring stack
to prevent shock absorber from topping out.
3
Shackles: FK08 anti inversion kit is mandatory fitment. Refer OME Technical & Fitting Manual.
53
TOYOTA
LANDCRUISER 60, 61 & 62 SERIES
FRONT
PETROL ENGINES
PART NUMBER
QTY
CS003F
*N88 / N92
2
SHOCK ABSORBER
CS004F
N88
SPRING BUSH KIT
OMESB1
U BOLT
OMEU51
2
FK01
3
FITTING KIT
STEERING DAMPER
ANTI INVERSION KIT
REAR
SPRING: RIDE/LIGHT LOAD
SHOCK ABSORBER
SPRING: MEDIUM LOAD
SHOCK ABSORBER
FITTING KIT
SHOCK ABSORBER
FITTING KIT
SPRING BUSH KIT
U BOLT
ANTI INVERSION KIT
UNIT
PRICE $
DIESEL ENGINES
PART NUMBER
CS004F
*N50 / N88
2
2
QTY
1
2
2
2
2
CS005F
N50
2
OMESB1
4
OMEU51
2
4
3
OMEGS2
1
1
FK01
OMEGS2
1
1
OMEGP1
1
OMEGP1
1
1
1
OMESD24
FK08
OMESD24
FK08
1
6
2
2
6
1
1
ALL MODELS
PART NUMBER
QTY
CS017RA / B
5
1+1
N94
N95
4
2
CS004RA /B
5
1+1
*N90 / N85
*N42 / N89
4
2
FK0422
FK0411
3
1
CS005RA / B
5
1+1
4
2
3
1
N90
N42
FK0418
OMESB1
OMEU59B
2
2
OMEGS1
OMEGP1
FK08
UNIT
PRICE $
6
4
1
1
1
REMARKS:
1
Vehicles with no front accessory weight may require the removal of the 4th leaf from the top of the spring stack.
OMECW2 spring caster wedge may be required to restore positive caster angle.
2
Compare original spring stack to OME spring stack to determine U bolt requirement.
3
Front: FK01 not required if OE U bolts are replaced with OMEU51.
Rear: Fitting Kit FK0418 is only required on vehicles with rubber insulators around rear springs.
Refer OME Technical & Fitting Manual Section 7 GFI: LandCruiser 60 Series page 7 selection chart.
4
Post 1986 vehicles have 19mm mounting pin and accept shock part no's N94, N90 & N85.
Pre 1986 vehicles have 16mm mounting pin and accept shock part no's N95, N42 & N89.
5
Barn door models may require A/A or B/B spring fitment.
6
Shackles: FK08 anti inversion kit is mandatory fitment if greasable shackles are not fitted.
54
UNIT
PRICE $
TOYOTA
LANDCRUISER 45, 47 SERIES ALL LWB MODELS
FRONT
PART NUMBER
QTY
CS001F
N81
2
2
2
CS002F
*N41 / N81
SHOCK ABSORBER
OMESB30
SPRING BUSH KIT
2
1
OMESB1
U BOLT - 25mm Eye Spring
2
OMEU59A
3
OMEU59B
1
OMEU59A
3
OMEU55
1
UNIT
PRICE $
2
STEERING DAMPER
ANTI INVERSION KIT
OMESD23
FK08
REAR
2
1
1
ALL MODELS
PART NUMBER
SPRING: MEDIUM LOAD
CS003R
N42
SHOCK ABSORBER
QTY
3
OMESB79
SPRING BUSH KIT
2
1
OMESB30
U BOLT
OMEU59B
TRIM PACKER
2
2
2
CS003R
N42
SHOCK ABSORBER
UNIT
PRICE $
2
4
TP02
2
ANTI INVERSION KIT
FK08
2
1
REMARKS:
1
OMESB30 suits 35mm spring eye and hanger bracket with 15mm shackle pin hole.
OMESB79 suits 35mm spring eye with 30mm hanger bracket with 18mm shackle pin hole.
2
Greasable Shackles (See chart below).
Note: FK08 anti inversion kit is mandatory fitment front and rear if greasable shackles are not fitted.
GREASABLE SHACKLES
FRONT
QTY.
18mm
Shackle Pin
OMEGS2
15mm
Shackle Pin
3
UNIT
PRICE $
REAR
QTY.
1
OMEGS1
1
OEMGP1
1
OMEGP1
1
OMEGS8
1
OMEGS9
1
OMEGP8
1
OMEGP8
1
Compatible
UNIT
UNIT
PRICE $ Bush Kit 1 PRICE $
OMESB1
OMESB79
OMESB30
OMESB30
Remove 3rd leaf from CS003R spring stack to reduce spring rate for medium duty application.
55
TOYOTA
LANDCRUISER 40, 42 SERIES ALL SWB MODELS
FRONT
PART NUMBER
QTY
CS001F
N81
2
2
2
CS002F
N41
SHOCK ABSORBER
OMESB30
SPRING BUSH KIT
2
1
OMESB1
2
OMEU59A
3
OMEU59B
1
OMEU59A
3
OMEU55
1
UNIT
PRICE $
2
STEERING DAMPER
ANTI INVERSION KIT
OMESD23
FK08
REAR
2
1
1
ALL MODELS
PART NUMBER
QTY
CS001R
*N89 / N95
2
SPRING: MEDIUM LOAD
SHOCK ABSORBER
SHOCK ABSORBER
U BOLT
CS002R
2
2
N89
OMEU59A
2
4
OMESB30
SPRING BUSH KIT
1
OMESB1
UNIT
PRICE $
2
2
ANTI INVERSION KIT
FK08
2
1
REMARKS:
1
2
Greasable Shackles (See chart below).
Note: FK08 anti inversion kit is mandatory fitment front and rear if greasable shackles are not fitted.
GREASABLE SHACKLES
FRONT
QTY.
18mm
Shackle Pin
OMEGS2
OEMGP1
15mm
Shackle Pin
UNIT
PRICE $
REAR
QTY.
1
OMEGS1
1
1
OMEGP1
1
OMEGS8
1
OMEGS9
1
OMEGP8
1
OMEGP8
1
56
Compatible
UNIT
UNIT
PRICE $ Bush Kit 1 PRICE $
OMESB1
OMESB30
TOYOTA
HILUX 2005 ON ALL MODELS
FRONT
TRIM PACKER
REAR
SPRING: LIGHT LOAD
SHOCK ABSORBER
SPRING: MEDIUM LOAD
SHOCK ABSORBER
PETROL ENGINES
PART NUMBER
QTY
OME883
*N167S / N166S
2
UNIT
PRICE $
2
2
OME884
N167S
2
OME95PF5
2
ALL MODELS
PART NUMBER
QTY
CS043R
N168
2
UNIT
PRICE $
2
2
CS044R
*N169 / N168
2
2
SHOCK ABSORBER
CS045R
N169
SPRING BUSH KIT
OMESB98
2
U BOLT
OMEU53
OMEGS14
4
1
PART NUMBER
QTY
OME880
N91SC
2
2
TACOMA V6
FRONT
REAR
SPRING: MEDIUM LOAD
SHOCK ABSORBER
SPRING BUSH KIT
EXHAUST BRACKET KIT
UNIT
PRICE $
2
2
OME881
N91S
2
ALL MODELS
PART NUMBER
QTY
CS046RA / B
1+1
N85
2
OMESB88
1
2
1
1
1
OMESB89
OMEGS12
FK21
2
UNIT
PRICE $
REMARKS:
1
OMESB88 must be used with OMEGS12 greasable shackles.
OMESB89 must be used with original shackles.
2
FK21 exhaust bracket is mandatory fitment to ensure exhaust system clears springs.
57
TOYOTA
HILUX 1997 TO 2004 ALL MODELS
FRONT
PART NUMBER
SHOCK ABSORBER
STEERING DAMPER
REAR
SPRING: MEDIUM LOAD
SHOCK ABSORBER
303003
QTY
1
*N87 / N80
OMESD33
1
2
1
ALL MODELS
PART NUMBER
CS018R
N68 + N68E
QTY
2
2
SHOCK ABSORBER
*N75 + N75E
N68 + N68E
1+1
SHOCK ABSORBER
CS020R
N75 + N75E
SHOCK ABSORBER
CS021R
N75 + N75E
SPRING BUSH KIT
OMESB43
OMEGS7
FK15
FK01
2
UNIT
PRICE $
2
1+1
CS019R
ANTI INVERSION KIT
FITTING KIT
UNIT
PRICE $
1+1
2
2
1+1
2
2
3
4
1+1
2
1
1
1
REMARKS:
1
2
N75E and N68E are longer in length and must be fitted to right hand side only.
Fitment to left hand side may cause damage to shock absorber and vehicle.
3
Mandatory Fitment: Either OMEGS7 or FK15 anti inversion kit must be fitted to prevent possible spring inversion.
4
Fitment of FK01 spacer washers to U Bolts is required to ensure correct tension is obtained on U bolts.
58
TOYOTA
HILUX PRE 1997 & 4 RUNNER ALL LEAF SPRING MODELS
FRONT
PETROL ENGINES
PART NUMBER
CS008FA / B
N84
CS009FA / B
*N93 / N84
QTY
1+1
2
CS009FA / B
*N93 / N84
1
1+1
2
2
CS009FA / B
N93
1
1
1
OMESB5
U BOLT
OMEU52
3
FK03
2
STEERING DAMPER
REAR
SPRING: MEDIUM LOAD
SHOCK ABSORBER
SHOCK ABSORBER
OMEGS4
OMEGP3
OMESD21
QTY
1
1+1
2
1
1+1
2
2
OMEU52
3
2
FK10
2
2
1
OMESB5
OMEGS4
OMEGP3
OMESD21
1
1
UNIT
PRICE $
1
1
ALL MODELS
PART NUMBER
QTY
CS009R
7
2
*N85 / N94
*N89 / N95
5
2
CS010R
7
2
N85
N89
5
2
U BOLT
OMEU53
4
SPRING BUSH KIT
OMESB6
2
1
PART NUMBER
1
SPRING BUSH KIT
FITTING KIT
UNIT
PRICE $
DIESEL ENGINES
OMEGS3
OMEGP3
UNIT
PRICE $
1
TRIM PACKER
TP04
4
ANTI INVERSION KIT
FK09
FK13
6
1
REMARKS:
1
A/A spring fitment may be needed on some vehicles for trimming purposes.
2
Petrol HiLux may require an FK03 (saddle correction plates) if the spring seats are distorted.
FK10 must be fitted to all Diesel & Petrol models used continually off road. Refer OME Technical & Fitting Manual.
3
OMEU52 is required when fitting OME springs to stop the U bolt contacting the drag link.
4
A trim packer may be required to trim vehicle. Only to be used on rear springs.
5
Shock selection *N89 / N95 for medium and N89 for heavy applications applies to vehicles up to 1984 due
to a 16mm eye and shorter open and closed lengths. Post 1984 vehicles with 19mm eye use *N85 / N94 for
medium applications and N85 for heavy applications.
6
If greasable shackles are not fitted anti inversion kits must be fitted.
FK09 fits all pre 1984 models.
FK13 fits all 1985 models on.
7
To provide correct shackle angle, 1985 - 89 automatic 4 Runner models require the 3rd leaf to be removed to
reduce spring rate.
59
TOYOTA
HILUX PRE 1997 EXTRA CAB & DUAL CAB SR5
IFS & REAR LEAF MODELS
FRONT
PART NUMBER
TORSION BARS: 50 KGS
SHOCK ABSORBER
STEERING DAMPER
REAR
303003
QTY
1
N98
OMESD33
UNIT
PRICE $
1
2
1
ALL MODELS
PART NUMBER
QTY
SPRING: MEDIUM LOAD
SHOCK ABSORBER
CS019R
*N85 / N94
2
2
SHOCK ABSORBER
CS020R
*N85 / N94
2
2
SPRING BUSH KIT
U BOLT
OMESB43
OMEU53B
2
UNIT
PRICE $
2
4
4 RUNNER IFS REAR COIL SPRING MODELS
FRONT
PART NUMBER
SHOCK ABSORBER
STEERING DAMPER
REAR
SPRING: MEDIUM LOAD
SHOCK ABSORBER
SHOCK ABSORBER
303003
N98
OMESD33
QTY
1
UNIT
PRICE $
1
2
1
ALL MODELS
PART NUMBER
QTY
OME900
N72F
2
OME901
N72F
UNIT
PRICE $
2
2
2
REMARKS:
1
2
Compare original spring stack height to OME spring stack to decide whether
OMEU53 or OMEU53B U bolts are required.
3
Install OE caster wedges from OE spring stack onto OME springs .
Ensure wedges are fitted as per original position.
60
TOYOTA
4 RUNNER IFS REAR LEAF SPRING MODELS
FRONT
PART NUMBER
SHOCK ABSORBER
STEERING DAMPER
REAR
SPRING: MEDIUM LOAD
SHOCK ABSORBER
SHOCK ABSORBER
SPRING BUSH KIT
303003
QTY
1
UNIT
PRICE $
1
N98
OMESD33
2
1
ALL MODELS
PART NUMBER
CS009R
*N85 / N94
CS010R
N85
QTY
3
2
2
3
2
2
OMESB6
U BOLT
OMEU53B
OMEGS3
OMEGP3
UNIT
PRICE $
2
4
2
1
1
REMARKS:
1
2
Compare original spring stack height to OME spring stack to decide whether
OMEU53 or OMEU53B U bolts are required.
3
Install OE caster wedges from OE spring stack onto OME springs.
Ensure wedges are fitted as per original position.
RAV 4 2000 ON DIESEL MODELS
FRONT
SPRING:
STRUT
DIESEL ENGINES
PART NUMBER
OME799
N135S & N136S
QTY
2
2
1
1+1
UNIT
PRICE $
REAR
SPRING:
SHOCK ABSORBER
PART NUMBER
OME795
OME031
QTY
2
UNIT
PRICE $
2
2
REMARKS:
1
N135S - right hand side x1.
N136S - left hand side x1.
2
61
TOYOTA
RAV 4 2000 ON PETROL MODELS
FRONT
SPRING:
STRUT
PETROL ENGINES
PART NUMBER
OME793
N119S & N123S
QTY
3
2
2
1+1
UNIT
PRICE $
REAR
SPRING:
SHOCK ABSORBER
PART NUMBER
OME795
OME031
QTY
3
UNIT
PRICE $
2
2
RAV 4 TO 2000 LWB PETROL MODELS
FRONT
PETROL ENGINES
PART NUMBER
SPRING:
OME793
CARTRIDGE
FITTING KIT
NC120
FK23
QTY
3
2
1
2
2
1
UNIT
PRICE $
REAR
SPRING:
SHOCK ABSORBER
PART NUMBER
OME794
OME031
QTY
3
UNIT
PRICE $
2
2
RAV 4 TO 2000 SWB PETROL MODELS
FRONT
PETROL ENGINES
PART NUMBER
SPRING:
OME793
CARTRIDGE
FITTING KIT
NC120
FK23
QTY
3
2
1
2
2
1
UNIT
PRICE $
REAR
SPRING:
SHOCK ABSORBER
PART NUMBER
OME796
OME031
QTY
3
UNIT
PRICE $
2
2
REMARKS:
1
NC120 is a replaceable cartridge insert. A FK23 adaptor is required for fitment to models from 1/1998 to 2000.
2
N119S - right hand side x 1, N123S - left hand side x 1.
3
62
SPECIFICATIONS
ADDING AN EXTRA LEAF
Required Centre Bolt
OME Part Number
11XL
CS003F & CS004F
OME110 & OME11
UCB2
113A/BXL
CSOO4RA/B & CS005RA/B
OME131A/B & OME1131A/B
D3XL
UCB8
13XL
CS001F &CS002F
OME13 & OME131
D4XL
UCB8
14XL
CS001R & CS002R
OME14 & OME141
Part No.
D1XL
D2XL
To Suit Dakar Spring No.
To Suit OME Spring No.
D5XL
UCB6
17XL
CS009R & CS010R
OME17 & OME171
D6XL
UCB6
18XL
CS019R & CS020R
OME18 & OME181
19XL
CS040R
OME19
D7XL
D8XL
UCB4
D9XL
201XL
CS003R
OME201
26XL
CS026R & CS027R
OME26 & OME261
D10XL
36XL
CS042R
OME36
D11XL
3A/BXL
CS010FA/B
OME3A/B
4XL
CS011R & CS012R
OME4 & OME41
D12XL
UCB1
D13XL
UCB6
D14XL
D15XL
CS043R & CS044R
-
49XL
CS013R & CS014R
OME491 & OME492
OME61A/B
6XL
CS016RA/B
D16XL
67XL
CS006F
OME67
D17XL
9A/BXL
CS008FA/B & CS009FA/B
OME99A/B & OME91A/B
D18XL
UCB1
NNXL
CS030R & CS031R & CS032R
OMENN1 & OMENN11
D19XL
UCB14
RODXL
CS028R & CS029R
OMEROD11
D20XL
S1A/BXL
CS012FA/B
OMES1A/B
D21XL
S2AXL
CS038R
OMES2
D22XL
JCXL
CS034RA/B & CS035RA/B
OMEJC1A/B & OMEJC2A/B
D23XL
J1FXL
CS014F
OMEJ1F
D24XL
J1RXL
CS036R
OMEJ1R
D25XL
UCB4
39XL
CS006R & CS007R
OME391 & OME3911
D26XL
UCB15
ROD4XL
CS024R & CS025R
OMEROD4
* FK01 U Bolt thread spacer kit is required on all CAB CHASSIS models.
In general terms, to reduce a springs rate remove the third leaf from the top of the spring.
Except if the third leaf is fitted with a spring clip, in this case remove the fourth leaf.
63
SPECIFICATIONS
REPLACEMENT MAIN & SECOND LEAF
MAIN LEAF
PART NUMBER
SECOND LEAF
PART NUMBER
40 SERIES - OME13, OME131
SL1F/1
SL1F/2
CS003F, CS004F, CS005F
60 SERIES - OME110, OME11, OME111
SL3F/1
SL3F/2
CS006F, CS007F
SL6F/1
SL6F/2
CS008FA
HILUX - OME99A
SL8FA/1
SL8FA/2
CS008FB
HILUX - OME99B
SL8FB/1
SL8FB/2
CS009FA
HILUX - OME91A
SL9FA/1
SL9FA/2
CS009FB
HILUX - OME91B
SL9FB/1
SL9FB/2
CS010FA, CS011FA
PATROL M60 - OME3A, OME31A
SL10FA/1
SL10FA/2
CS010FB, CS011FB
PATROL M60 - OME3B, OME31B
SL10FB/1
SL10FB/2
CS012FA, CS013FA
SUZUKI SIERRA - OMES1A
SL12FA/1
SL12FA/2
CS012FB, CS013FB
CS014F
SUZUKI SIERRA - OMES1B
JEEP YJ - OMEJ1F
SL12FB/1
SL14F/1
SL12FB/2
SL14F/2
DAKAR PART NUMBER
OME SPRING PART NUMBER
FRONT SPRINGS
CS001F, CS002F
REAR SPRINGS
CS001R, CS002R
SL1R/1
SL1R/2
CS003R
45 SERIES - OME201
SL3R/1
SL3R/2
CS004RA, CS005RA
60 SERIES - OME113A, OME1131A
SL4RA/1
SL4RA/2
CS004RB, CS005RB
60 SERIES - OME113B, OME1131B
SL4RB/1
SL4RB/2
CS006R, CS007R, CS008R
75 SERIES - OME39, OME391, OME3911, OME39111
SL6R/1
SL6R/2
CS009R, CS010R
HILUX - OME17, OME171, OME1711
SL9R/1
SL9R/2
CS011R, CS012R
PATROL M60 - OME4, OME41
SL11R/1
SL11R/2
78/79 SERIES - OME49, OME491, OME492, OME493
SL13R/1
SL13R/2
CS016RA
PATROL Y60, Y61 CAB CHASSIS - OME61A, OME611A
SL16RA/1
SL16RA/2
CS016RB
PATROL Y60, Y61 CAB CHASSIS - OME61B, OME611B
SL16RB/1
SL16RB/2
CS017RA
HJ60 - OME221A
SL17RA/1
SL17RA/2
CS017RB
HJ60 - OME221B
SL17RB/1
SL17RB/2
CS018R, CS019R, CS020R, CS021R
HILUX - OME180, OME18, OME181, OME1811
SL18R/1
SL18R/2
CS022R, CS023R
TRITON / PAJERO - OME22, OME222
SL22R/1
SL22R/2
CS024R, CS025R
ISUZU / RODEO 2003 - OMEROD4, OMEROD5
SL24R/1
SL24R/2
CS026R, CS027R
MAZDA / FORD UTE - OME26, OME261
SL26R/1
SL26R/2
CS028R, CS029R
ISUZU / RODEO - OMEROD1, OMEROD11, OMEROD111
SL28R/1
SL28R/2
NAVARA D21, D22 - OMENN1, OMENN11, OMENN2
SL30R/1
SL30R/2
CS033RA
JEEP XJ - 75mm
SL33RA/1
SL33RA/2
CS033RB
JEEP XJ - 75mm
SL33RB/1
SL33RB/2
CS034RA, CS035RA
JEEP XJ - OMEJC1A, OMEJC2A
SL34RA/1
SL34RA/2
CS034RB, CS035RB
JEEP XJ - OMEJC1B, OMEJC2B
SL34RB/1
SL34RB/2
CS036R, CS037R
JEEP YJ - OMEJ1R, OMEJ2R
SL36R/1
SL36R/2
CS038R, CS039R
SUZUKI SIERRA - OMES2, OMES21
SL38R/1
SL38R/2
CS040R, CS041R
MITSUBISHI CHALLENGER - OME19, OME191
SL40R/1
SL40R/2
CS042R
FORD EXPLORER - OME36
SL42R/1
SL42R/2
64
SPECIFICATIONS
REPLACEMENT CENTRE BOLTS
Dimension Details
Centre Bolt Head
Part No. Diameter
A
Head
Depth
B
Shank
Shank Thread
Length Diameter Length
C
D
E
Thread
Spring Part No.
UCB 1
17
10
90
9.5
50
3/8 UNF OME411, 41, 4, 6, 61
UCB 2
15
15
90
9.5
50
3/8 UNF OME11311, 1131, 113, 21, 221
UCB 3
14
11
70
9.5
50
3/8 UNF OME11, 110, 111, 3, 37, 371, 3711, 221
UCB 4
14
8
110
9.5
50
3/8 UNF OME29, 291, 2911, 201, 2011, 39, 391, 3911
UCB 5
14
8
70
9.5
50
3/8 UNF OME15, 19, 191, 22, 26, 57, 571, 67, 671, 49
UCB 6
14
8
80
7.9
50
5/16 UNF OME1711, 171, 17, 181, 99, 91, 491, 492
UCB 7
14
5
55
7.9
35
5/16 UNF OMES2, S21, S1
UCB 8
12
9
75
7.9
50
5/16 UNF OME1311, 13, 131, 141, 14, JC1, JC2
UCB 9
13
10
55
7.9
40
5/16 UNF OMEJ1F, J1R, J2R
UCB 10
14
8
120
9.5
40
3/8 UNF OME39111
UCB 11
17
10
115
9.5
40
3/8 UNF OME611
UCB 12
11
8
70
7.9
40
5/16 UNF OMEROD
UCB 13
14
6
70
9.5
40
3/8 UNF OMENN11
UCB 14
14
6
80
9.5
40
3/8 UNF OMENN111
UCB 15
11.5
9
72
7.9
30
5/16 UNF OMEROD4+5
U BOLTS
OE spring stack height must be compared to OME spring before final
U Bolt selection as OE spring stack heights may vary from model to model.
PART NO.
A
B
LEG
LEG
LENGTH CENTRE
C
D
E
THREAD THREAD THREAD
PITCH
TOP
REC.
REC
TYPE
TORQUE TORQUE
DIA
LENGTH
mm
mm
mm
mm
OMEU51
210
85
14
70
1.5
SQUARE
110
149
OMEU52
200
76
14
75
1.5
FLAT
110
149
OMEU53
168
75
14
70
1.5
SQUARE
110
149
OMEU53A
185
75
14
65
1.5
SQUARE
110
149
OMEU53B
200
75
14
70
1.5
SQUARE
110
149
OMEU54
175
85
12
70
1.25
ROUND
70
94
OMEU55
218
97
14
70
1.5
SQUARE
110
149
OMEU56
100
75
12
50
1.25
SQUARE
70
94
OMEU57
190
88
12
70
1.25
ROUND
70
94
OMEU58
210
110
14
75
1.5
ROUND
110
149
OMEU58B
OMEU59A
242
197
110
97
14
14
75
75
1.5
1.5
ROUND
ROUND
110
110
149
149
OMEU59B
225
97
14
75
1.5
ROUND
110
149
Lbs.ft.
N/m
OMEU59C
240
97
14
75
1.5
ROUND
110
149
OMEU60
150
81
11
70
1.27
ROUND
54
73
OMEU61
147
87
10
60
1.25
ROUND
40
54
OMEU61B
160
87
10
70
1.25
ROUND
40
54
OMEU62
145
73
10
70
1.25
ROUND
40
54
OMEU63
190
74
12
50
1.25
SQUARE
70
94
OMEU64
260
125
14
90
1.5
ROUND
110
149
OMEU65
OMEU66
215
190
97
103
14
14
75
60
1.5
1.5
ROUND
ROUND
110
110
149
149
65
SPECIFICATIONS
GREASABLE SHACKLES
Model
TOYOTA
75 Series
TOYOTA
70, 73, 74 Series
TOYOTA
60 Series
TOYOTA Late Model
40, 42, 45, 47 Series
TOYOTA Early Model
40, 42, 45, 47 Series
TOYOTA HILUX & ISUZU
HiLux
NISSAN PATROL
GQ 89 on Single Cab
TOYOTA
78 & 79 Series
TOYOTA TACOMA
ISUZU / RODEO
HiLux 2005 on
FRONT
Description
Shackle Kit
Fixed End Pin
Shackle Kit
Fixed End Pin
Shackle Kit
Fixed End Pin
Shackle Kit
Fixed End Pin
Shackle Kit
Fixed End Pin
Shackle Kit
Fixed End Pin
Shackle Kit
Fixed End Pin
Shackle Kit
Fixed End Pin
Shackle Kit
Shackle Kit
Shackle Kit
REAR
Contents
Part Number
OMEGS2
Shackles x 2
OMEGP1
Pin & Plate x 2
OMEGS2
Shackles x 2
OMEGP1
Pin & Plate x 2
OMEGS2
Shackles x 2
OMEGP1
Pin & Plate x 2
OMEGS2
Shackles x 2
OMEGP1
Pin & Plate x 2
OMEGS8
Shackles x 2
OMEGP8
Pin & Plate x 2
OMEGS4
Shackles x 2
OMEGP3
Pin & Plate x 2
OMEGS2
Shackles x 2
OMEGP2
Pin & Plate x 2
-
Part Number
OMEGS1
OMEGP2
OMEGS2
GSP01
OMEGS1
OMEGP1
OMEGS1
OMEGP1
OMEGS9
OMEGP8
OMEGS3
OMEGP3
OMEGS1
OMEGP2
OMEGS10
OMEGP7
OMEGS12
OMEGS13
OMEGS14
Contents
Shackles x 2
Pin & Plate x 2
Shackles x 2
Pin Only x 2
Shackles x 2
Pin & Plate x 2
Shackles x 2
Pin & Plate x 2
Shackles x 2
Pin & Plate x 2
Shackles x 2
Pin & Plate x 2
Shackles x 2
Pin & Plate x 2
Shackles x 2
Pin & Plate x 2
Shackles x 2
Shackles x 2
Shackles x 2
Remarks
Rear: Check fixed end spigot size:
50mm=OMEGP2, 51mm=OMEGP4
Remove original pin from retainer replace with GSP01
Late models with 35mm eye springs with
18mm shackle pins
Early models with 15mm shackle pins
OMEGS3 fits Isuzu 1 tonne rear
Use only with OME springs
SPECIAL NOTE: OMEGS1, OMEGS2, OMEGS3, OMEGS8 and OMEGS9 have built-in anti-inversion design.
66
SPECIFICATIONS
SUSPENSION FITTING KITS
Part No.
Contains
Vehicle
Position
FK01
FK03
Refer to:
16 Flat Washers
60 Series
Front
Manual Sec. 4 GFI - Front suspension installation
2 Saddle Correction Plates
HiLux Petrol
Front
FK0411
4 x Retainer Spacers 11mm
60 Series
Rear
Manual Sec. 4 GFI
FK0418
60 Series
Rear
Manual Sec. 4 GFI
FK0422
60 Series
Rear
Manual Sec. 4 GFI - Rear suspension installation
FK0429
60 Series
Rear
FK047
60 Series
Rear
FK06
2 x Stabiliser Bar Packers 3mm
Suzuki
Front
FK08
2 x Anti-Inversion Plates
60,75 Series
Front
Manual Sec. 8 Technical - Shackle Modification
All 40 & 70 Series
&
GQ, Maverick ute & c/c
Rear
FK09
All HiLux
Rear
Manual Sec. 8 Technical - Shackle Modification
FK10
2 x Short Gussett Plates
HiLux
Front
Manual Sec. 8 Technical - HiLux Front Springs
2 x Long Gussett Plates
All models
FK13
2 x Anti-Inversion Side Plates
All HiLux
Rear
Manual Sec. 4 GFI
FK14
Isuzu 1 Tonne P/Up
Rear
Fitting instructions supplied with kit
FK15
2 x Ani-Inversion Side Plates
1997on HiLux
Rear
FK16
2 x 20mm Bump Stop Spacers
Wrangler TJ
Rear
FK18
2 x Brackets
GU Patrol
Rear
Sway Bar
3 x Bolts
3 x Washers
3 x Nuts
FK19
4 x Spacer Plates
LandCruiser
Front
4 x 35mm Bolts
78 & 79 Models
Sway Bar
6 x Spacer Plates
Land Rover Discovery
Front
8 x Bolts M8 X 1.25 X 35mm
199 on Models
Cross
4 x Spring Washers
FK20
8 x Flat Washers
FK21
Member
1 x Bracket
Toyota
Rear
2 x Bolts M8
Tacoma
Exhaust
2 x Flat Washers
Bracket
2 x Hex Nuts
FK22
2 x Shock Tower Support
Mazda/Ford
2 x Captive Nuts
1 tonne Pickup
Front
Fitting instructions
Front
4 x M10 x 1.5 x 30mm Bolt
4 x Washers Flat
4 x Washers Spring
FK23
1 x Strut Adaptor
Toyota / RAV 4
FK24
2 x Brackets
Nissan Y61
Rear
6 x Bolts
with Stabiliser
Sway Bar
11 X Washers Flat
Bar Release
1998 to 2000
6 x Nuts Nyloc
FK25
2 x Spacer Blocks
Nissan Y61
4 x Bolts
Oil Pan Kit
Front
4 x Washers Flat
4 x Washers Spring
67
SPECIFICATIONS
SUSPENSION FITTING KITS
Part No.
Contains
Vehicle
Position
Refer to:
FK26
2 x Side Plates
Isuzu / Rodeo 2003 on
Rear
FK27
2 x Support Brackets
Land Cruiser
Torsion Bar
100 Series
Locating
IFS
Bracket
Suzuki XL7
Front
Rear
Manual Sec. 4 GFI Patrol gearbox spacer kit
FK28
2 x Spacers
2 x Studs
FKWTJ01
1 x 45mm Panhard Rod Extended
Wrangler
FKWTJ02
Mounting Bracket
TJ
2 x Spacer Washers
3 x Bolts M12 X 1.25 X 30MM
6 x Flat Washers
3 x Spring Washers
3 x Nuts M12 x 1.25
GQGK01
4 x Spacer Plates
GQ Patrol
Gearbox
8 x Hex. Bolts
Maverick
Cross Member
4 x Spacer Plates
Nissan Y61
Gearbox
9 x Spacer 12mm
Patrol
Gearbox
Gearbox
Gearbox
8 x Flat Washers
8 x Spring Washers
GQGK03
17 x Washers Spring
17 x Washers Flat
JWGK01
JWGK02
6 x Spacer Plates
Jeep
6 x Bolt Spacers
Wrangler
6 x 2" Bolts
to 2002
6 x Spacer Plates
Jeep TJ
6 x Bolts
2003 Manual
17 x Washers Flat
Models
17 x Washers Spring
JWGK03
8 x Spacer Plates
Jeep TJ
8 x Bolts
2003 Auto
8 x Washers Flat
Models
8 x Washers Spring
68
SPECIFICATIONS
LEAF SPRING TRIM PACKERS
(Mild Steel 5mm Thick)
HOLE DIA. APPLICATIONS
PART No.
WIDTH
LENGTH
TP01
70mm
140mm
10.3mm
TOYOTA 60, 75, NISSAN GQ / FORD MAVERICK CAB CHASSIS & NISSAN GQ UTE
TP02
70mm
140mm
8.7mm
TOYOTA 40, 42, 45, 47
TP03
60mm
140mm
10.3mm
NISSAN MQ, MITSUBISHI PAJERO, TRITON, L200
TP04
60mm
140mm
8.7mm
TOYOTA HILUX
TP05
50mm
120mm
8.7mm
SUZUKI SIERRA, HOLDEN DROVER
To be used to correct left to right trim problems. Maximum 2 plates (10mm). Order centre bolt separately.
Refer Manual for Instructions.
CLIP LINER KITS FOR LEAF SPRINGS
Kit Part No.
Contents: Clip Liner Size & Quantity
To Suit
CLK11
20mm X 4
OME110, 11, 111, J1F
CLK113A
30mm X 4, 90mm X 2
OME113A, 1131A
CLK113B
30mm X 4, 80mm X 2
OME113B, 1131B
CLK13
40mm X 4
OME13, 131
CLK14
30mm X 4, 60mm X 2
OME14, 141
CLK17
35mm X 4, 70mm X 2
OME17, 171
CLK18
30mm X 4, 90mm X 2
OME18, 181
CLK201
40mm X 4, 80mm X 2
OME201
CLK22
35mm X 4, 40mm X 2
OME22, 222
CLK221
20mm X 4, 40mm X 2
OME221A/B
CLK3
30mm X 4
OME3A/B, 31A/B, JC1
CLK39
50mm X 4, 80mm X 2
OME39, 391, 3911, 39111
CLK4
40mm X 4
OME4, 41
CLK57
30mm X 4, 35mm X 2
OME67, 671
CLK6
45mm X 4, 95mm X 2
OME6, 61
CLK9
35mm X 2, 30mm X 2
OME91A/B, 99A/B
CLKJ1
25mm X 4
OMEJ1R
CLKJ2
30mm X 4, 80mm X 2
OMEJC2
CLKNN
80mm X 2
OMENN1, NN11
CLKROD
30mm X 4, 70mm X 2
OMEROD1, ROD11
INTER-LEAF LINER KIT FOR LEAF SPRINGS
IL01YE
6 LINERS PER KIT
LEAF SPRING CENTRE BOLT SLEEVES
Part No.
Length mm
OD mm
ID mm
Application
CBS01
15
25
15
LandCruiser 60 series rear
CBS02
10
19
16.8
GQ Patrol cab chassis front
69
DIAGRAM REFERENCE FOR SUSPENSION BUSH KITS
Diagram 1.
Diagram 2.
Diagram 3.
Diagram 4.
Diagram 5.
Diagram 6.
70
DIAGRAM REFERENCE FOR SUSPENSION BUSH KITS
Diagram 7.
Diagram 8.
Diagram 9.
Diagram 10.
Diagram 11.
Diagram 12.
71
SUSPENSION BUSH KIT SELECTION
VEHICLE
YEAR
LOC'N DESCRIPTION
OME P/NO.
QTY
REQ.
NOTE
OMESB2360
1
Refer Diagram 7
DAIHATSU
F Series All Models
5/93 on
F
Sway bar - link lower
R
Sway bar - link upper
OMESB2360
1
"
"
Feroza All Models
10/88 on
F
Sway bar - link inner/outer
OMESB2360
2
"
"
Rocky All Models
4/84 to 93
F
Sway bar - link eye
OMESB0052
1
"
"
1/87 on
F
Sway bar - link
OMESB2361
1
Refer Diagram 4
Refer Diagram 8
FORD
Courier All Models
Maverick SWB & Wagon Models
8/87 to 9/93
R
Spring bush
OMESB82
2
F
Caster Kit
OMECA77B
1
R
Maverick Single Cab Models Leaf Springs
Refer Diagram 2
Coil Packer - 5mm
OMEGQPF05
"
Coil Packer - 10mm
OMEGQPF10
"
"
Control arm - to diff front/centre (std)
OMESB0055
1
"
"
Control arm - to chassis
OMESB0056
1
"
"
Panhard rod
OMESB0054
1
"
"
Sway bar - D mount (15mm)
OMESB2365
1
"
"
Sway bar - link
OMESB2379
1
"
"
Coil Packer - 5mm
OMEGQPR05
1
Coil Packer - 10mm
OMEGQPR10
"
"
Control arm - upper
OMESB0062
1
"
"
Control arm - lower
OMESB0061
1
"
"
Panhard rod
OMESB0054
1
"
"
OMESB2366
1
"
"
Sway bar - link
Spring & shackle bush kit
OMESB2379
OMESB64
1
2
"
Refer Diagram 9
" "
Suits OME springs only
Refer Diagram 4
GMH / ISUZU
Drover
Jackaroo / Trooper Models
OMESB19
OMESB19
2
2
Refer Diagram 4
Suits OE & OME
springs Refer Diagram 4
Strut/radius rod - bush
OMESB2032
1
Refer Diagram 1
Sway bar - link
OMESB2032
OMESB90
1
R
" "
Suits OE & OME
81 to 87
R
Spring bush
OMESB80
2
88 on
F
R
Sway bar - link
Spring bush
OMESB2032
OMESB80
1
F
Coil Packer - 10mm
OMELNF10
2/85 on
V6 Models Only
LADA NIVA
Spring bush
Spring bush
F
8/85 - 91
UBS 16 & 17
Rodeo - Isuzu Pick Up Models
All Models
F
R
ALL
72
2
2
Suits OE & OME
Refer Diagram 2
Suits OE & OME
VEHICLE
YEAR
OME P/NO.
QTY
REQ.
CALR2
1
Control arm - to diff
OMESB0072
1
OMESB0066
1
"
"
Panhard rod
OMESB0065
1
"
"
Sway bar - link
OMESB3022
1
"
"
A arm - upper
OMESB0071
1
OMESB0070
1
"
"
Control arm - to chassis (20mm-ID)
OMESB0069
1
"
"
Sway bar - link
Caster kit
OMESB3022
CALR1
1
OMESB0067
1
OMESB0066
1
Panhard rod
OMESB0065
1
A arm - upper
OMESB0071
1
OMESB0070
1
"
"
OMESB0068
1
"
"
Caster kit
OMESB0069
CALR2
1
OMESB0072
1
OMESB0066
1
"
Panhard rod
OMESB0065
1
"
"
Sway bar - link
OMESB3022
1
"
"
A arm - upper
OMESB0071
1
OMESB0070
1
"
"
OMESB0069
1
"
"
Sway bar - link
Caster kit
OMESB3022
CALR1
1
OMESB0067
1
OMESB0074
1
A arm - upper
OMESB0071
1
OMESB0070
1
"
"
OMESB0068
1
"
"
Caster kit
OMESB0069
CALR2
1
OMESB0072
1
OMESB0066
1
"
"
Panhard rod
OMESB0065
1
"
"
Sway bar - link
OMESB3022
1
"
"
A arm - upper
OMESB0071
1
OMESB0070
1
"
"
OMESB0068
1
"
"
OMESB0069
1
"
"
Sway bar - link
OMESB3022
1
"
"
LOC'N DESCRIPTION
NOTE
LAND ROVER
Defender 90, 110 & 130 Models
92 on
F
R
County 110 Model
84 to 92
F
R
Discovery All Models
89 to 99
F
R
Range Rover
72 to 86
F
R
Range Rover
86 to 95
F
R
Caster kit
73
1
1
1
1
Suits 44mm wide
control arms Refer
Diagram 8
" "
Refer Diagram 11
" "
Suits 38mm wide
control arms Refer
Diagram 8
" "
"
"
"
"
Refer Diagram 11
" "
Suits 44mm wide
control arms Refer
Diagram 8
" "
"
Refer Diagram 11
" "
Suits 38mm wide
control arms Refer
Diagram 8
" "
"
"
Refer Diagram 11
" "
Suits 44mm wide
control arms Refer
Diagram 8
" "
Refer Diagram 11
VEHICLE
YEAR
LOC'N DESCRIPTION
OME P/NO.
QTY
REQ.
OMESB2361
1
Refer Diagram 7
OMESB82
2
Refer Diagram 4
OMESB5240
1
Refer Diagram 2
OMESB83
2
Refer Diagram 4
NOTE
MAZDA
B2500 & B2600
3/87 to 98
B2500 & B2600
F
Sway bar - link
R
Spring bush
MITSUBISHI
Challenger PA Wagon (Rear Leaf Springs)
98 to 5/00
F
Control arm - lower front
R
Spring bush
Pajero
All Models NA to NJ
83 on
F
Control arm - lower front mount
OMESB5240
1
Refer Diagram 2
9/89 to 5/91
F
Sway bar - link inner
OMESB2361
1
NA, NB, NC, ND, NE, NF & NG
83 to 5/91
F
OMESB2360
2
NA, NB, NC, ND, NE, & NF
83 to 8/89
F
OMESB2223
1
NH & NJ
5/91 to 10/96
F
OMESB2223
1
NG, NH & NJ
9/89 to 10/96
F
Sway bar - link
OMESB2032
1
Suits V6 & intercooled
diesel models Refer
Diagram 2
Suits 4 cyl petrol &
diesel models not
intercooled Refer
Diagram 2
Suits V6 wagon & SWB
models Refer Diagram 9
Suits diesel 4M40 & V6
wagon 7/93 on models
Refer Diagram 9
Refer Diagram 9
5/91 on
R
Spring bush
OMESB8
2
Refer Diagram 4
3/86 to 96
F
Control arm - upper
OMESB5071
1
Refer Diagram 2
OMESB5240
1
OMESB2360
2
" "
Refer Diagram 2
NG
All Leaf Spring Models
Triton
ME & MH Models
Club Cab Model Only
MK Models
10/96 on
F
R
Spring bush
F
OMESB38
2
Refer Diagram 4
OMESB5240
1
Refer Diagram 2
R
OMESB38
2
Refer Diagram 4
Refer Diagram 1
NISSAN
720 Models
8/79 to 85
F
Control arm - upper
OMESB5071
1
Navara D21 All
9/85 to 97
F
Control arm - upper
OMESB5071
1
Sway bar - link
OMESB2379
1
R
Navara D22 All
Pathfinder All
8/86 to 94
2/97 on
OMESB81
2
OMESB2379
1
"
"
" "
Refer Diagram 4
Refer Diagram 1
Suits models to 8/02
Refer Diagram 4
R
OMESB81
2
R
OMESB91
2
Suits models 10/02 on
Refer Diagram 4
F
Control arm - upper
OMESB5071
1
Refer Diagram 1
Sway bar - link
OMESB2379
1
"
"
Patrol
MQ (Round Head Lights)
80 to 8/84
F
Spring (front eye) bush kit
OMESB28
2
MQ (Square Head Lights)
8/84 to 87
F
Spring (front eye) bush kit
OMESB31
2
80 to 87
F
Spring (rear eye) bush kit
OMESB29
2
R
Spring & shackel bush kit
OMESB2
2
MQ All Models
Spring bush
74
OMESB29
2
Use with OMESB29/OE
springs use OMESB3
Refer Diagram 4
Use with OMESB29
suits OME springs
Refer Diagram 4
Refer Diagram 4
Suits OE and OME
Suits OME springs
Refer Diagram 4
OME P/NO.
F
Body mount - bumper area
OMESB9090
1
4
F
Body mount - cab front
OMESB9091
1
4
F
Body mount - cab centre
OMESB9092
1
4
F
F
F
F
F
F
F
F
F
F
OMESB9092
OMECA77B
OMESB0055
OMESB0056
OMESB1
OMESB2366
OMESB0058
OMESB0054
OMESB2379
OMEGQPF05
OMEGQPF10
OMESB9092
OMESB9092
OMESB0054
OMESB64
2
1
1
1
2
1
1
1
1
4
4
8
4
6
2
2
4
8
R
R
R
R
Body mount - cab front & centre
Caster kit - Control arm
Control arm - to axle
Spring g- eye front/rear & shackle
Sway bar - D mount 16mm
Panhard rod - bush
Sway bar - link
Coil Packer - 5mm
Coil Packer - 10mm
Body mount - cab rear to axle
Body mount - cab rear to axle
Panhard rod - bush
Spring - eye front/rear & shackle
2
1
1
2
4
4
4
6
8
4
R
Sway bar - link
OMESB2379
1
8
8
R
R
R
R
Control arm - lower
Control arm - upper
Coil Packer - 5mm
Coil Packer - 10mm
OMESB0060
OMESB0061
OMESB0062
OMEGQPF05
OMEGQPR10
1
1
1
2
8
8
8
8
8
F
F
Body mount - bumper area
Body mount - cab front
Body mount - cab centre
Body mount - cab front & centre
Caster kit - Control arm - to axle
Control arm - to axle
Panhard rod - bush
Sway bar - link
Sway bar - mount 15mm
Body mount - cab centre to axle
Body mount - cab centre to axle
Panhard rod - bush
OMESB9090
OMESB9091
OMESB9092
OMESB9092
OMECA77B
OMESB0055
OMESB0056
OMESB0054
OMESB2379
OMESB2365
OMESB9092
OMESB9092
OMESB0054
1
1
1
2
1
1
1
1
1
1
2
1
1
4
4
4
4
4
8
4
4
8
2
4
4
4
Sway bar - link
Trailing arm - lower
Trailing arm - upper
Coil Packer - 5mm
Coil Packer - 10mm
OMESB2379
OMESB2366
OMESB0061
OMESB0062
OMEGQPR05
OMEGQPR10
1
1
1
1
8
2
8
8
DIAGRAM #
11/87 - 97
DESCRIPTION
BUSHES IN KITS
YEAR
KITS REQ
MODEL
LOC'N
NISSAN
PATROL - Y60, GQ
Suits Wagon & Hardtops, no kit
available for cab Chassis model
Suits All Wagon to 11/94 & All
Hardtop models
Suits All Wagon & hardtop models.
Suits Pick Up & Cab Chassis
models
8
8
8
4
4
8
8
8
F
F
F
F
F
F
F
R
R
R
R
R
R
R
75
Suits Leaf Spring models
Suits Leaf Spring models
Suits All Wagon & Hardtop models
Suits Coil spring models
Suits All Wagon models
Suits All Hardtop models
PATROL - Y61, GU
10/97- on
NOTES
Leaf Spring models
Suits Cab Chassis models with coil
susp.
susp.
Suits Wagon & Hardtop, no kit
available for Cab chassis model
Suits All Cab Chassis models
8
8
8
8
8
8
Suits Coil spring models to 2001
Suits All Wagon models
Suits All Hardtop models
8
8
8
8
8
susp.
Suits Pick Up with coil susp.
Sierra SJ410 & SJ413
TOYOTA
4 Runner Leaf Spring Front & Rear
4 Runner (Surf) LN60, YN60
7/81 - 95
7/84 - 10/85
4 Runner IFS Front Leaf Spring Rear
11/85 - 9/89
4 Runner (Surf) LN61, YN63
HiLux IFS Front & Coil Spring Rear
4 Runner (Surf) LN130, RN130,
VZN130, YN130
10/89 - 6/96
HiLux 4WD Leaf Spring Front & Rear
4/79 - 10/83
HiLux (Surf) LN36, 46 RN36, 46
DIAGRAM #
LJ80
74 - 6/78
74 - 6/78
7/78 - 12/81
NOTES
4
4
4
4
4
4
Suits OE & OME Springs
6
6
4
4
1
2
8
6
12
4
OMESB2360
OMESB0049
OMESB2915
OMESB3010
1
1
1
1
4
2
8
4
12
12
7
7
Suits LN130, RN130 models
Suits VZN130, YN130 models
Spring - bush kit
Sway bar - link
Spring - bush kit
OMESB5
OMESB2915
OMESB2326
OMESB6
2
1
1
2
6
8
2
6
4
4
1
4
Suits OE & OME springs
Spring - bush kit
Spring - bush kit
OMESB5
OMESB6
2
2
6
6
4
4
DESCRIPTION
OME P/NO.
KITS REQ
SUZUKI
Jimny SN413
LJ50
YEAR
LOC'N
MODEL
BUSHES IN KITS
R
F
R
F
R
F
R
Coil Packer - 10mm
Spring Bush
Spring Bush
Spring Bush
Spring Bush
Spring Bush
Spring Bush
OMESJR10
OMESB25
OMESB25
OMESB19
OMESB19
OMESB19
OMESB19
2
2
2
2
2
2
F
R
Spring - bush kit
Spring - bush kit
OMESB5
OMESB6
2
2
F
R
Sway bar - link
Spring - bush kit
OMESB2032
OMESB6
F
F
R
R
Sway bar - link
Sway bar - link
Sway bar - link
F
F
F
R
F
R
Suits OE & OME springs
HiLux (Surf) LN65, YN 65, 67
11/83 - 9/88
HiLux (Surf) RN105, LN106
10/88 - 11/97 F
F
F
R
Spring - bush kit
Sway bar - link
Spring - spring bush
OMESB5
OMESB2032
OMESB0049
OMESB6
2
1
1
2
6
8
2
6
4
4
4
4
HiLux 4WD IFS Front & Leaf Spring
Rear
HiLux (Surf) LN107, 111, RN106, 110,
111
10/88 - 12/97 F
F
R
Sway bar - link
Spring - bush kit
OMESB2032
OMESB0049
OMESB43
1
1
2
8
2
6
1
1
4
Suits OME Springs only
Sway bar - link
Spring - bush kit
Sway bar - link
Spring - bush kit
OMESB2915
OMESB0049
OMESB43
OMESB3010
OMESB0049
OMESB43
1
1
2
1
1
2
8
2
6
4
2
6
1
1
4
1
1
4
LN167, 172, RZN169, 174
KZN165
11/97 on
12/99 on
F
F
R
F
F
R
76
FJ60, 62, HJ60, 62
FJ62, HJ60, 61
Bundera (Prado NZ) LJ70, RJ70
BJ70, 73, 74
HJ75
DIAGRAM #
FJ55
OME P/NO.
BUSHES IN KITS
TOYOTA (continued)
BJ40, 42, FJ40, 45, ,JH45, 47
DESCRIPTION
1969 - 12/84 F
F
F
R
R
Spring - bush kit-to suit 15mm ID
OMESB30
OMESB4
OMESB1
OMESB4
OMESB30
2
2
2
2
2
6
6
6
6
6
4
4
4
4
4
R
R
R
Sway bar - link
OMESB79
OMESB1
OMESB2102
2
2
2
6
6
2
4
4
4
Suits 35mm spring eye
Suits 35mm spring eye & 30mm
hanger bracket
Suits model 1/79 - on
Spring - bush kit
Spring - bush kit
Sway bar - link
OMESB7
OMESB7
OMESB2102
2
2
2
6
6
2
4
4
4
Suits models 1/79 - on
F
F
F
R
R
R
R
Spring - bush kit
Sway bar - link
Spring - bush kit
Sway bar - link upper & lower
OMESB1
OMESB2915
OMESB2324
OMESB1
OMESb2102
OMESB2326
OMESB2327
2
1
1
2
2
1
1
6
8
2
6
2
2
2
4
4
4
4
4
4
4
F
F
F
F
R
R
R
Spring - bush kit
Sway bar - link
Spring - bush kit
Sway bar - link upper & lower
OMESB1
OMESB2915
OMESB2326
OMESB2327
OMESB1
OMESB2102
OMESB2327
2
1
1
1
2
2
1
6
8
2
2
6
2
2
4
4
4
4
4
4
4
F
F
F
F
F
F
R
R
Panhard rod - bush
Sway bar - link
Control arm - lower rear
Panhard rod - bush
OMESB8133
OMESB2361
OMESB2324
OMESB2327
OMESB0049
OMESB8131
OMESB8133
OMESB8131
1
2
1
1
1
1
1
1
4
8
2
2
2
4
4
4
10
10
10
10
10
10
8
8
F
F
F
F
R
Spring - bush kit
Sway bar - link
Spring - bush kit
OMESB1
OMESB2361
OMESB2327
OMESB0063
OMESB1
2
2
1
1
2
6
8
2
2
6
4
4
4
4
4
F
F
F
F
R
Spring - bush kit
Sway bar - link
Spring - bush kit
OMESB1
OMESB2361
OMESB2327
OMESB0063
OMESB16
2
2
1
1
2
6
8
2
2
6
4
4
4
4
4
YEAR
LOC'N
MODEL
KITS REQ
11/72 - 11/80 F
R
R
11/80 - 8/87
8/87 - 12/91
1/85 - 12/91
1/85-3/90
1/85-3/90
77
NOTES
Suits GX & VX models
Suits model to 1/90
Suits model to 8/87
Suits model to 7/87
Suits models 8/87 - 1/90
Suits model 7/87 - 1/90
Suit OE & OME Springs
Suits model 6/86 on
Suits models 6/86 on
PZJ70, 73
FZJ78, 79, HDJ78, 79, HZJ78, 79
1/88-11/99
3/90-2/91
8/99 on
OME P/NO.
DIAGRAM #
FZJ70, 75, HZJ70, 73, 75
1/85 - 10/92
DESCRIPTION
BUSHES IN KITS
TOYOTA (continued)
FJ70, 73, 75
YEAR
KITS REQ
MODEL
LOC'N
F
F
Spring - bush kit
Sway bar - link
OMESB1
OMESB2361
2
2
6
8
4
4
F
F
F
F
R
R
R
Sway bar - link replacement kit
Spring - bush kit
Spring - bush kit
OMESB2998
OMESB2327
OMESB0063
OMESB0049
OMESB16
OMESB1
OMESB0095
1
1
1
1
2
2
1
8
2
2
2
6
6
2
4
4
4
4
4
4
4
F
F
Spring - bush kit
Sway bar - link
OMESB1
OMESB2361
2
2
6
8
4
4
F
F
F
OMESB2998
OMESB0063
OMESB0049
1
1
1
8
2
2
4
4
4
F
R
R
Spring - bush kit
Spring - bush kit
OMESB0095
OMESB16
OMESB1
1
2
2
2
6
6
4
4
4
R
OMESB0095
1
2
4
F
F
Spring - bush kit
Sway bar - link
OMESB1
OMESB2361
2
1
6
8
4
4
F
R
Spring - bush kit
OMESB2998
OMESB1
1
2
8
6
4
4
F
F
Caster kit
OMECA77B
OMESB0050
1
1
4
4
10
10
F
F
F
R
R
R
Sway bar - link outer
Panhard rod - bush
Sway bar - link inner
Sway bar - link outer lower
Sway bar - link outer upper
OMESB2413
OMESB2414
OMESB0046
OMESB3010
OMESB0052
OMESB3010
OMESB0095
1
1
1
1
1
1
1
2
2
4
4
4
4
2
10
10
10
8
4
4
4
Spring - bush kit
OMESB86
2
6
4
Spring - bush kit
OMESB84
2
6
4
Spring - bush kit
OMESB85
2
6
4
78
NOTES
Suits model 1/90 on Complete kit
with link rods, bushes & washers
Suits model to 5/86
Suits model 6/86 on
Suits FJ75 models to 8/91
Suits FJ70, 73 models
Suits Bracket height =38mm
Complete kit with link rods, bushes
& washers
Suits HZJ75 models to 4/91
Suits HZJ75 models to 4/91
Suits 4/91 on Bracket height =
38mm
Suits FJ75 models
Suits HZJ70 & 73 models
Suits 4/91 on Bracket height =
38mm
Complete kit with link rods, bushes
& washers
Caster align offset 3 degree
Contains new bolts, nuts & crush
tubes
Suits Bracket height = 38mm
Suits FZJ / HDJ / HZJ78 models
with OME Springs
Suits JFZ / HDJ / HZJ79 models
with OME Springs
Suits all models with OME springs
& greasable shackles
FZJ105, HZJ105 Solid Axle
1/90 - 2/98
3/98 on
OME P/NO.
F
F
F
F
F
F
F
F
F
F
F
F
R
R
R
R
R
R
R
Caster kit
Control arm - to chassis only
Panhard rod - bush
Control arm - complete kit
Coil Packer - 5mm
Coil Packer - 10mm
Panhard rod - bush
Control arm - lower
Control arm - upper
OMECA77B
OMESB0050
OMESB0046
OMESB0045
OMESB0051
OMESB0044
OMESB0063
OMESB0094
OMESB0091
OMESB0092
OME80PF05
OME80PF10
OMESB0053
OMESB0052
OMESB3010
OMESB0049
OMESB0095
OMESB0047
OMESB0048
1
1
1
2
1
1
1
1
1
1
4
4
4
6
4
4
2
2
2
2
1
1
1
1
1
1
1
4
4
4
2
2
8
8
10
10
10
10
10
10
10
10
10
10
10
10
8
8
8
8
8 Suits large Bracket height = 38mm
8
8
F
F
F
F
F
F
F
Caster kit
Control arm - complete kit
Control arm - to chassis only
Panhard rod - bush
Coil Packer - 5mm
Coil Packer - 10mm
OMECA77B
OMESB0045
OMESB0050
OMESB0046
OMESB0044
OME80PF05
OME80PF10
1
2
1
1
1
4
6
4
4
2
10
10
10
10
10
F
R
R
R
R
R
R
R
R
Panhard rod - bush
Control arm - lower
Control arm - upper
Coil Packer - 5mm
Coil Packer - 10mm
OMESB0092
OMESB3010
OMESB0052
OMESB0053
OMESB0095
OMESB0047
OMESB0048
OME80PR05
OME80PR10
1
1
1
1
1
1
1
2
4
4
4
2
8
8
10
8
8
9
8
8
8
DIAGRAM #
DESCRIPTION
BUSHES IN KITS
TOYOTA (continued)
FJ80, FZJ80, HDJ80, ,HZJ80
YEAR
KITS REQ
MODEL
LOC'N
LandCruiser Lexus
HDJ100, UZJ100 (Lexus) IFS
3/98 on
F
F
R
Sway bar - link
OMESB2361
OMESB0097
OMESB2915
1
1
1
4
2
8
7
7
7
Tacoma
To 2004
R
R
Spring bush
Spring bush
OMESB88
OMESB89
2
2
4
4
4
4
79
NOTES
STD replacement
Suits large bracket (Bracket height
= 38mm)
Suits original shackles only
SPECIFICATIONS
SHOCK ABSORBERS
Part Number
N15/N15C
N16
N17
N18
N19/N19C
N21
N22F
N23F
N25
N26F
N27
N28
N29/N29C
N30
N30E
N31S
N32
N33
N34
N35/N35C
N36/N36C
N37
N38S
N39/N39C
N40/N40C
N41
N42
N43
N44
N45F
N46
N47
N48
N49
N50
N51
N52/N52F
N53/N53C
N54
N55
N56
N57G
N58
N59
N60G
N61/N61C
N62G
N63G
Open
Length
(mm)
517
477
632
340
492
492
651
492
642
381
560
504
656
618
659
501
500
625
509
568
562
591
473
562
556
499
594
485
560
554
560
406
560
446
584
365
425
628
554
585
554
340
325
559
340
607
507
478
Closed
Length
(mm)
327
352
382
225
292
292
396
292
377
245
340
309
396
368
389
318
315
365
329
348
342
366
339
342
336
309
359
295
340
324
340
251
335
271
349
235
265
378
339
345
339
225
215
339
225
367
317
299
UPPER MOUNT BUSH KIT
Type
E4005
P4184
E4026-T
P4169
P4184
P4184
E4005
P4184
E4005
P4169
E4005
P4169
E4005
E4001
E4001
N/A
P4169
P4169
E4001
P4169
E4026-T
E4040
P
P4169
E4003
E4001
E4001
P4169
E4005
P4184
E4005
P4169
E4001
P4169
P4169
P4169
P4161
E4040-B
E4001
P4161
E4001
P4169
P4169
E4001
P4169
E4005-S
E4001
P4169
Original Kit
110-034-064
SMP374
SMP488
SMP474
SMP345
SMP345
SMP363
SMP345
SMP517
SMP474
110-034-063
SMP474
SMP363
110-034-065
*110-034-065
N/A
SMP474
SMP476
110-034-065
SMP476
SMP490
110-110-054
N/A
SMP476
110-034-076
110-034-065
110-034-065
SMP474
110-034-063
SMP374
110-034-063
SMP474
110-034-065
SMP474
SMP474
SMP474
SMP334
110-004-040
110-034-065
SMP334
SMP511
SMP474
SMP474
*SMP516
SMP474
SMP363
110-034-065
SMP474
Bushes only
REPLACEMENT
OMEB36
OMEB42
11003478
OMEB13
OMEB42
OMEB42
OMEB36
OMEB42
OMEB36
OMEB13
OMEB36
OMEB13
OMEB36
OMEB14
OMEB14
N/A
OMEB13
OMEB13
OMEB14
N/A
110034078
N/A
N/A
OMEB13
N/A
OMEB14
OMEB14
OMEB13
OMEB36
OMEB42
OMEB36
OMEB13
OMEB14
OMEB13
OMEB13
OMEB13
OMEB12
N/A
OMEB14
OMEB12
OMEB14
OMEB13
OMEB13
OMEB14
OMEB13
OMEB17
OMEB14
OMEB13
LOWER MOUNT BUSH KIT
Type
E4005
E4078-T
E4026-S
E4026-S
P4184
P4184
E4005
P4184
P4169
E4026-S
P4184
E4005
E4005
E4001
E4001
N/A
E4026-S
E4026-S
E4026-S
E4026-T
E4026
E4040-B
E
E4026-T
E4026-S
E4001
E4001
E4001
P4184
P4184
P4184
P4169
P4169
P4169
E4005
E4026-BS
E4026-S
E4026-S
E4001
E4026-S
E4001
E4026-S
E4026-S
E4001
E4026-T
E4026-S
E4005-S
E4005-S
Original Kit
110-034-064
SMP487
110-034-074
110-034-056
110-034-056
SMP363
SMP363
SMP345
SMP474
N/A
SMP374
110-034-064
SMP363
110-034-065
110-034-065
N/A
N/A
110-034-056
110-034-056
SMP489
110-034-056
110-110-054
N/A
SMP489
110-034-056
110-034-065
110-034-065
110-034-065
SMP374
SMP374
SMP374
SMP474
SMP474
SMP474
110-034-064
110-034-074
110-A42-071
110-034-074
110-034-065
110-A42-071
SMP516
N/A
N/A
N/A
110-110-078
110-034-056
110-034-072
110-034-077
Bushes only
REPLACEMENT
OMEB36
110034078
N/A
OMEB10
OMEB42
OMEB42
OMEB40
OMEB42
OMEB13
OMEB10
OMEB42
OMEB36
OMEB40
OMEB14
OMEB14
N/A
OMEB10
OMEB10
OMEB10
110034078
OMEB10
N/A
N/A
110034078
OMEB10
OMEB14
OMEB14
OMEB14
OMEB42
OMEB42
OMEB42
OMEB13
OMEB13
OMEB13
OMEB36
N/A
OMEB10
N/A
OMEB14
OMEB10
OMEB14
OMEB10
OMEB10
OMEB14
110034078
OMEB10
OMEB17
OMEB17
cont.
Bush kits with part numbers starting with SMP indicate the kits have the urethane bush, mounting nut & washers.
Note:
*Spacer Kit SMP511 also supplied.
See page 68 for legend of mount types
80
SPECIFICATIONS
SHOCK ABSORBERS
Part Number
N64/N64C
N65
N66/N66C
N67
N68
N68E
N69
N70
N71E
N72F
N73
N74E
N75
N75E/N75F
N76
N77
N78
N79
N80
N81
N83
N84
N85
N86/N86C
N87
N88
N89
N90
N91S
N91SC
N92
N93
N94
N95
N96
N97
N98
N100
N101/N101C
N102
N103S
N104/N104C
N105
N106/N106C
N107/N107C
N108/N108C
N109S
N110
Open
Length
(mm)
478
385
568
562
634
660
470
614
620
548
614
620
640
652
685
570
447
507
352
499
345
485
587
539
352
589
594
582
470
470
589
485
587
599
431
545
389
440
610
482
504
641
508
537
608
593
472
575
Closed
Length
(mm)
299
245
335
339
387
394
290
354
370
329
354
370
390
397
408
340
287
307
232
309
225
295
357
329
232
349
359
357
335
335
349
295
357
359
261
325
249
290
360
302
318
391
318
317
373
363
327
350
Type
P4169
P4169
P4169
E4026-TB
E4005
E4005
E4005
P4184
P4184
P4169
P4184
P4184
E4005
E4005
E4005
E4032-B
E4005
E4005
P4169
E4001
P4169
P4169
E4005
P4169
P4169
P4169
E4001
E4005
PPP4169
P4169
E4005
E4001
P4169
E4001
P4169
P4203
P4204
P4169
PE4040
P4169
P4184
E4005-BS
E4005-BS
N/A
P4158
Original Kit
SMP474
SMP474
SMP476
110-110-089
110-034-064
110-034-064
110-034-064
SMP403
SMP403
SMP474
SMP501
SMP501
110-034-064
110-034-064
110-034-064
110-110-077
110-034-064
110-034-064
SMP474
110-034-065
SMP474
SMP474
110-034-064
SMP474
SMP474
SMP474
**110-034-065
110-034-064
SMP415
SMP415
SMP474
SMP474
110-034-064
**110-034-065
SMP474
110-034-065
SMP474
SMP493
SMP493
SMP474
N/A
110-110-054
SMP474
SMP501
110-110-066
110-110-066
Use OE Bushes
SMP641
Bushes only
REPLACEMENT
OMEB13
OMEB13
N/A
N/A
OMEB15
OMEB15
OMEB36
OMEB42
OMEB42
OMEB13
OMEB42
OMEB42
OMEB15
OMEB15
OMEB15
N/A
OMEB15
OMEB36
OMEB13
OMEB14
OMEB13
OMEB13
OMEB15
OMEB13
OMEB13
OMEB13
OMEB14
OMEB15
N/A
N/A
OMEB13
OMEB13
OMEB15
OMEB14
OMEB13
OMEB14
OMEB13
N/A
N/A
OMEB13
N/A
N/A
OMEB13
OMEB42
N/A
N/A
N/A
N/A
Type
E4005-S
E4026-S
E4026-TB
E4026-S
E4005
E4005
P4184
P4184
E4005
E4005
P4184
E4005
E4005
E4005
E4005
P4169
E4005
P4169
E4005-S
E4001
E4026-S
E4026-S
E4005
E4005
E4005
E4005
E4001
E4005
E4050-B
E4050-B
E4005
E4026
E4005
E4001
P4169
P4169
E4005
E4050-B
E4005
E4050-B
N/A
E4055-B
E4026-S
P4184
E4005-T
E4005-BS
E4055BS
E4040-BS
Note:
*Spacer Kit SMP495 also supplied.
81
Original Kit
110-034-077
N/A
110-110-088
110-034-056
110-034-064
110-034-064
SMP374
SMP403
110-034-064
110-034-064
SMP501
110-034-064
110-034-064
110-034-064
110-034-064
SMP474
110-034-064
SMP474
110-034-072
110-034-065
SMP381
N/A
110-034-064
110-034-064
110-034-072
110-034-064
110-034-065
110-034-064
110-110-060
110-110-060
110-034-064
110-034-056
110-034-064
110-034-065
SMP474
SMP474
110-034-072
110-110-060
110-034-063
110-110-060
N/A
110-110-069
110-004-026
SMP501
110-110-067
110-110-066
110-110-075
110-110-076
Bushes only
REPLACEMENT
OMEB17
OMEB10
N/A
OMEB10
OMEB15
OMEB15
OMEB42
OMEB42
OMEB36
OMEB36
OMEB42
OMEB36
OMEB15
OMEB15
OMEB15
OMEB13
OMEB15
OMEB13
OMEB17
OMEB14
OMEB10
OMEB10
OMEB15
OMEB15
OMEB17
OMEB36
OMEB14
OMEB15
110-110-060
110-110-060
OMEB36
OMEB10
OMEB15
OMEB14
OMEB13
OMEB13
OMEB17
N/A
OMEB40
N/A
N/A
N/A
OMEB10
OMEB42
N/A
110-110-066
N/A
N/A
cont.
SPECIFICATIONS
SHOCK ABSORBERS
Part Number
N111
N112
N113
N114
N115
N116
N117
N118
N119S
NC120
N121S
NC122
N123S
N124S
N125S
N126S
N127S
N128
N129S
NS130
NS131
N132
N133
N134
N135S/N136S
NC137
NC138
N139S
N140S
N141
N142
N143S
N144S
NC145
N146
N147S
N148S
N149
N150
N151
N152
N153
N156S
N157S
N158S
N159S
NC160
NC161
NC163
Open
Length
(mm)
548
449
537
475
554
527
578
532
596
609
576
589
596
576
411
411
601
358
472
333
333
573
443
587
602
539
609
537
543
577
577
590
590
651
655
476
476
504
388
308
576
528
365
365
405
405
601
572
617
Closed
Length
(mm)
328
279
337
285
324
327
358
322
395
402
389
402
395
389
289
289
385
238
327
201
201
359
287
347
393
369
400
411
405
353
353
408
408
439
379
359
359
313
242
202
345
312
530
530
610
610
403
386
386
Type
P4170
P4169
E4005
P4184
P4184
E4001
E4057-S
P4169
N/A
N/A
N/A
N/A
N/A
N/A
P
P
P
P4205
N/A
P
P
E4057
P4203
E4057
P
P
P
P
P
P4184
P4184
P
P
P
P
P
P
E4051-B
P4205
P4205
P4158
P4205
P
P
P
Original Kit
Bushes only
REPLACEMENT
Type
SMP312
SMP474
110-034-064
SMP345
SMP374
110-034-065
110-110-072
SMP474
SMP483
110-039-058
SMP483
110-039-058
SMP483
SMP483
N/A
N/A
N/A
SMP474
Use OE Bushes
SMP497
SMP497
110-110-085
SMP493
110-110-085
SMP483
SMP546
SMP546
SMP447
SMP633/626
SMP569
SMP569
SMP625
SMP641
SMP633
SMP633
110-110-092
SMP474
SMP474
SMP641
SMP474
Nut only
Nut only
Nut only
Nut only
SMP546
SMP625 & 633
SMP625 & 633
N/A
OMEB13
OMEB15
OMEB42
OMEB42
OMEB14
N/A
OMEB13
SMP483
110039058
SMP483
110039058
SMP483
SMP483
SMP363
SMP363
SMP354
OMEB13
N/A
SMP497
SMP497
N/A
SMP493
N/A
SMP483
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
OMEB13
OMEB13
N/A
OMEB13
OEM
OEM
OEM
OEM
SMP546
SMP625 & 633
SMP625 & 633
E4026-S
E4005
E4005
P4184
P4184
E4005-S
E4001-S
E4005
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
E-B
E4026-T
E4055BS
N/A
N/A
E4005
E4050-B
E4005
N/A
E4050
E4050
E4005
E4005
E4055-B
E4050
E4050
E4051-B
E4026-S
E4026-S
E4051-BS
E4026-S
N/A
N/A
N/A
N/A
N/A
N/A
N/A
Note:
82
Original Kit
SMP487
110-034-064
110-034-064
SMP345
SMP374
110-034-072
110-034-020
110-034-680
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
SMP489
110-110-075
N/A
N/A
110-110-086
110-110-060
110-110-086
N/A
110-110-060
110-110-060
SMP621
SMP621
110-110-093
110-110-060
110-110-060
110-110-092
110-034-056
110-034-056
110-110-076
110-034-056
OEM
OEM
OEM
OEM
N/A
N/A
N/A
Bushes only
REPLACEMENT
N/A
OMEB15
OMEB15
OMEB42
OMEB42
OMEB17
OMEB10
OMEB11
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
110-110-060
N/A
N/A
110-110-060
110-110-060
N/A
N/A
N/A
N/A
N/A
N/A
110-100-060
110-110-060
N/A
OMEB10
OMEB10
N/A
OMEB10
OEM
OEM
OEM
OEM
N/A
N/A
N/A
cont.
SPECIFICATIONS
SHOCK ABSORBERS
Part Number
Closed
Length
(mm)
527
657
543
543
600
600
600
473
495
415
585
429
415
497
450
502
470
627
608
615
N164
N165
N166S
N167S
N168
N169
OME007
OME013
OME014
OME015
OME018
OME023
OME025
OME027
OME028
OME029
OME030
OME031
OME032
OME033
Note:
Open
Length
(mm)
317
397
411
411
370
370
359
292
305
256
359
270
256
297
281
314
302
379
369
382
Type
P4184
E4005
P
P
E4005
E4005
E4004
E4001
E4001
P4175
E4003
E4001
P4175
P4175
P4169
E4028-S
E4028-S
P4175
P4175
P-
Original Kit
Bushes only
REPLACEMENT
Type
SMP501
110-034-064
SMP633 & 626
SMP633 & 626
SMP649
SMP649
110-034-003
110-034-065
110-034-065
SMP333
110-034-003
110-034-065
SMP333
SMP333
SMP474
110-110-009
110-110-009
SMP333
SMP333
SMP636
OMEB42
OMEB15
SMP633 & 626
SMP633 & 626
OMEB15
OMEB15
N/A
OMEB14
OMEB14
OMEB13
N/A
OMEB14
OMEB13
OMEB13
OMEB13
N/A
N/A
OMEB13
OMEB13
OMEB13
P4184
E4005
E4050-BS
E4050-BS
E4005
E4005
E4003
E4001
E4001
E4001
E4003
E4001
E4001
E4001
E4028-S
E4028-S
E4028-S
E4001
E4001
E4005-S
Original Kit
SMP501
110-034-064
110-110-060
110-110-060
SMP649
SMP649
110-034-003
110-034-065
110-034-065
110-034-065
110-034-003
110-034-065
110-034-065
110-034-065
110-110-009
110-110-009
110-110-009
110-034-065
110-034-065
110-034-072
SHOCK ABSORBER MOUNT TYPES
Mount Type
Pin Part No.
P4161
P4169
P4170
P4175
P4184
P4203
P4204
P4205
Dimensions (mm)
Thread Length X Dia
62 x M10 x 1.5
53 x M10 x 1.25
73 x M10 x 1.5
58 x M10 x 1.5
71 x M12 x 1.25
85 x M14 x 1.5
77 x M14 x 1.5
54 x M10 x 1.25
OME Replacement
Part No.
OMEB13
OMEB13
OMEB13
OMEB13
OMEB42
Use original
Use original
OMEB13
Mount Type
Eye Part No.
E4001
E4003
E4005
E4026
E4028
E4032
E4040
E4050
E4055
E4057
Dimensions (mm)
OD x ID x L
37 x 25.3 x 24.3
42.6 x 37.7 x 19.5
44.2 x 31.7 x 30
37 x 27 x 25
38.4 x 25.1 x 23
46.7 x 36.6 x 33
46 x 37 x 30
45 x 39 x 35
50 x 40.2 x 34
42 x 32.5 x 29
Mounting Kit
Replacement Part No.
OMEB14
Not available
OMEB36 *OMEB40
OMEB10
Not available
Not available
Not available
Not available
Not available
Not available
B-BONDED BUSH
S-BUSH WITH SLEEVE
T-CROSS PIN
MOUNTING
*Special Bush for N22F,
N29/N29C Lower Rear Mount
83
Bushes only
REPLACEMENT
OMEB42
OMEB15
110-110-060
110-110-060
OMEB15
OMEB15
N/A
OMEB14
OMEB14
OMEB14
N/A
OMEB14
OMEB14
OMEB14
N/A
N/A
N/A
OMEB14
OMEB14
OMEB17
SPECIFICATIONS
LEAF SPRINGS
Dakar Part No.
OME Part No.
CS001F
CS001R
CS002F
CS002R
CS003F
CS003R
CS004F
CS004RA
CS004RB
CS005F
CS005RA
CS005RB
CS006F
CS006R
CS007F
CS007R
CS008FA
CS008FB
CS008R
CS009FA
CS009FB
CS009R
CS010FA
CS010FB
CS010R
CS011FA
CS011FB
CS011R
CS012FA
CS012FB
CS012R
CS013FA
CS013FB
CS013R
CS014F
CS014R
CS015R
CS016RA
CS016RB
CS017RA
CS017RB
CS018R
CS019R
CS020R
OME13
OME14
OME131
OME141
OME110
OME201
OME11
OME113A
OME113B
OME111
OME1131A
OME1131B
OME67
OME391
OME671
OME3911
OME99A
OME99B
OME39111
OME91A
OEM91B
OME17
OME3A
OME3B
OME171
OME31A
OME31B
OME4
OMES1A
OMES1B
OME41
N/A
N/A
OME491
OMEJ1F
+OME492
+OME493
OME611A
OME661B
OME221A
OME221B
*OME180
OME18
OME181
Stack
Height
(mm)
48.0
43.0
54.0
49.0
30.0
81.0
36.0
58.0
58.0
42.0
64.0
64.0
43.0
82.0
49.0
89.0
32.5
32.5
96.0
39.0
39.0
48.0
43.0
43.0
54.5
49.0
49.0
56.0
24.4
24.4
63.0
30.0
30.0
68.0
26.0
68.0
76.0
82.0
82.0
48.0
48.0
52.5
52.5
59.0
No. of
Leaves
Eye Dia. mm
Front
Rear
Weight
(kg)
8
5+1
9
6+1
5
6+3
6
6+2
6+2
7
7+2
7+2
7
7+3
8
8+3
5
5
9+3
6
6
4+2
7
7
5+2
8
8
8
4
4
9
5
5
5+2
4
5+2
6+2
7+3
7+3
8
8
3+3
3+3
4+3
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
40.0
35.0
40.0
30.0
30.0
40.0
30.0
30.0
30.0
32.5
32.5
30.0
32.5
32.5
32.5
30.0
30.0
32.5
30.0
30.0
40.0
31.4
40.0
40.0
40.0
40.0
35.0
35.0
39.0
39.0
39.5
23.0
21.5
27.0
25.6
15.5
45.4
17.7
31.6
31.6
21.5
36.0
36.0
21.6
46.8
25.5
52.2
14.8
14.8
59.5
18.4
18.4
20.0
18.9
18.9
24.2
22.3
22.3
26.8
8.1
8.1
30.2
10.4
10.4
47.9
11.0
47.9
51.5
50.8
50.8
25.5
25.5
25.0
27.3
30.6
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
40.0
35.0
40.0
30.0
30.0
40.0
30.0
30.0
30.0
32.5
32.5
30.0
32.5
32.5
32.5
40.0
40.0
32.5
40.0
40.0
40.0
37.6
40.0
40.0
40.0
40.0
35.0
35.0
30.0
30.0
30.0
* These springs have a 20mm lower 2nd Stage than other springs in the series.
+ These springs have a 20mm higher 2nd stage than other springs in this series.
84
Primary
Free
Camber mm
165
225
165
225
200
235
196
250
230
196
250
230
220
240
220
240
170
150
240
170
150
230
215
200
230
215
200
275
125
110
275
125
110
268
210
268
268
250
235
250
230
215
235
235
Spring Rate
lbf/in
350
300 / 450
398
357 / 496
220
510 / 710
257
268 / 570
268 / 570
305
314 / 617
314 / 617
302
388 / 610
348
455 / 600
208
208
500 / 656
254
254
217 / 388
283
283
285 / 445
343
343
211
207
207
240
247
247
279 / 548
148
297 / 548
325 / 680
325 / 585
325 / 585
255
255
125 / 485
125 / 485
160 / 540
N/mm
61.3
52.5 / 79
69.8
62.5 / 87
38.5
90 / 125
45
47.0 / 100
47.0 / 100
53.5
55 / 108
55 / 108
53
68 / 107
61
80 / 105
36.5
36.5
88 / 115
44.5
44.5
38.0 / 68.0
49.6
49.6
50.0 / 78.0
60
60
37
36.3
36.3
42
27.9
27.9
52 / 96
26
52 / 96
57 / 119
57 / 103
57 / 103
44.7
44.7
22 / 85
22 / 85
28 / 95
cont.
SPECIFICATIONS
LEAF SPRINGS
Dakar Part No.
OME Part No.
CS021R
CS022R
CS023R
CS024R
CS025R
CS026R
CS027R
CS028R
CS029R
CS030R
CS031R
CS032R
CS034RA
CS034RB
CS035RA
CS035RB
CS036R
CS037R
CS038R
CS039R
CS040R
CS041R
CS042R
CS043R
CS044R
+CS045R
CS046RA
CS046RB
N/A
N/A
N/A
N/A
N/A
N/A
OME1811
OME22
+OME222
OMEROD4
+OMEROD5
OME26
OME261
OMEROD11
+OMEROD111
OMENN1
OMENN11
*OMENN2
OMEJC1A
OMEJC1B
OMEJC2A
OMEJC2B
OMEJ1R
OMEJ2R
OMES2
OMES21
OME19
OME191
OME36
N/A
N/A
N/A
OME15A
OME15B
OME1711
*OME39
OME49
OME61A
OME61B
OMEROD1
Stack
Height
(mm)
65.5
41.0
58.0
54.0
54.0
59.0
65.5
48.0
60.5
52.5
59.0
52.5
32.5
32.5
37.0
37.0
32.5
32.5
36.0
42.0
29.0
35.0
45.0
50.0
50.0
57.0
52.0
52.0
61.0
75.0
60.0
75.0
75.0
41.5
No. of
Leaves
Eye Dia. mm
Front
Rear
Weight
(kg)
5+3
5+1
6+2
4+2
4+2
4+3
5+3
4+2
4+3
3+3
4+3
3+3
5
5
4+1
4+1
5
5
3+2
4+2
3+1
4+1
4+1
4+2
4+2
5+2
5+2
5+2
6+2
6+3
4+2
6+3
6+3
3+2
39.0
31.5
31.5
39.0
39.0
32.7
32.7
39.0
39.0
40.0
40.0
40.0
62.0
62.0
62.0
62.0
37.6
37.0
40.0
40.0
31.5
31.5
46.8
40.0
40.0
40.0
40.5
40.5
30.0
40.0
40.0
40.0
40.0
39.0
31.0
22.0
29.5
22.0
22.0
26.3
30.1
22.5
25.4
22.1
25.5
22.1
18.2
18.2
20.9
20.9
13.7
13.8
9.8
12.3
16.4
16.4
28.0
24.0
24.0
27.5
26.7
26.7
28.0
39.8
41.0
45.1
45.1
18.7
30.0
27.5
27.5
30.0
30.0
32.7
32.7
30.0
30.0
32.5
32.5
32.5
43.5
43.5
43.5
43.5
31.4
31.0
30.0
30.0
27.5
27.5
31.0
30.0
30.0
30.0
30.0
30.0
30.0
40.0
40.0
40.0
40.0
30.0
Primary
Free
Camber mm
235
195
195
181
188
164
164
250
250
170
170
170
230
205
235
210
205
185
175
175
211
211
210
194
204
204
222
209
230
240
268
250
235
250
Free Camber is measured from top of eye (not centre line) to main leaf at centre bolt. Allow 3mm tolerance either side
* These springs have a 20mm lower 2nd Stage than other springs in the series.
+ These springs have a 20mm higher 2nd stage than other springs in this series.
85
Spring Rate
lbf/in
274 / 571
194 / 388
230 / 570
205 / 450
319 / 581
177 / 616
217 / 662
170 / 457
216 / 616
126 / 531
165 / 571
165 / 571
148
148
137 / 257
137 / 257
188
188
171 / 291
228 / 348
148 / 245
200 / 296
228 / 310
170 / 340
170 / 340
204 / 361
114 / 194
114 / 194
340 / 500
320 / 543
228 / 474
280 / 540
280 / 540
131 / 400
N/mm
48 / 100
34.0 / 68.0
41 / 100
36 / 79
56 / 102
31 / 108
38 / 116
30 / 80
38 / 108
22 / 93
29 / 100
29 / 100
26
26
24 / 45
24 / 45
33
33
30 / 51
40 / 61
26 / 43
35 / 52
40 / 55
30 / 60
30 / 60
35.8 / 63.8
20 / 34
20 / 34
60 / 88
56 / 95
40 / 83
49 / 95
49 / 95
23 / 70
SPECIFICATIONS
COIL SPRINGS
Spring Number
OME500
OME501
OME502
OME503
OME504
OME505
OME506
OME507
OME508
OME602
OME603
OME604
OME751
OME752
OME754
OME755
OME760
OME761
OME762
OME763
OME764
OME766
OME767
OME776
OME777
OME779
OME781
OME791
OME792
OME793
OME794
OME795
OME796
OME797
OME798
OME799
OME850
OME851
OME856
OME859
OME860
OME861
OME862
OME863
OME864
OME865
OME866
OME868
OME870
OME871
OME872
OME873
Bar Dia.
mm
14.5
15
16
15
14.5
15
15
15
15
16
17
17
16
17
21
19
15
16
18
19
17
17
17
15
15
16
18
16
14
15
16
16
16
13
13
16
17
17
16
17
18
16
17
19
20
18
18
21
14
16
14
17
Free Height mm
A
B
385
385
350
350
350
350
342
342
355
355
330
330
330
330
338
338
315
315
392
392
410
410
400
400
390
380
440
440
435
435
435
435
385
375
400
390
420
410
420
410
430
420
420
420
385
375
410
390
395
375
410
390
425
415
280
280
435
435
350
350
260
255
280
280
255
250
345
345
400
400
353
353
495
505
475
485
465
465
460
460
480
490
480
490
460
470
480
490
480
490
460
460
465
465
480
490
370
355
410
400
400
400
455
455
86
Number
Of Coils
5.4
7.3
6.0
7.0
5.4
7.3
5.1
5.1
5.6
8.2
7.0
6.0
8.0
9.0
8.0
8.0
9.0
9.1
9.5
9.2
9.8
9.0
8.0
8.8
8.0
8.0
9.2
7.3
9.3
5.2
7.3
6.0
7.3
10.0
10.5
5.5
9.8
9.8
11.0
11.0
8.3
10.4
9.0
8.3
8.3
8.3
9.0
8.3
8.5
7.3
9.0
10.0
Coil weight
Kg
3.5
4.5
4.6
4.1
3.4
4.2
3.5
3.5
3.7
5.9
6.6
5.7
7.0
6.7
10.9
9.0
6.8
6.1
8.2
7.9
7.3
6.5
6.3
5.2
4.8
4.8
7.9
4.0
4.0
3.7
4.2
3.9
4.2
2.6
3.2
4.6
7.3
7.3
6.3
6.3
8.1
7.0
8.0
9.2
10.3
8.3
9.8
11.4
3.7
5.1
4.0
8.5
Spring Rate
lbf / in
N / mm
155
27
175
30.6
245
42.9
185
42.9
155
27
175
30.6
180
31.5
180
31.5
180
31.5
180
31.5
188
32.9
227
39.8
230
40
270
47
420
73.5
300
52.5
180 - 250
35 - 44
200
35
300 - 340
52 - 60
360
63
220
38.5
250
44
285
50
160
28
180
31.5
225
39
290
51
410
72
150
27
165
28.8
420
73.6
360
63
420
73.6
340
59.5
210
36.8
220
38.5
220
38.5
220
38.5
230
40
275
48
220
38.5
220
38.5
240
42
250
44
320
56
220
38.5
240 - 300
42 - 52.5
360
63.1
200
35
220
38.5
190
33
200
35
cont.
SPECIFICATIONS
COIL SPRINGS
Spring Number
OME874
OME875
OME876
OME880
OME881
OME882
OME883
OME884
OME885
OME886
OME890
OME891
OME892
OME895
OME896
OME897
OME900
OME901
OME902
OME903
OME904
OME905
OME907
OME908
OME910
OME911
OME912
OME913
OME914
OME915
OME917
OME918
OME919
OME920
OME921
OME922
OME923
OME924
OME925
OME926
OME927
OME928
OME929
OME930
OME931
OME932
OME933
OME934
OME935
OME936
OME937
Bar Dia.
mm
15
18
14
16
16
16
17
17
17
17
15
16
18
17
18
19
16
17
18
16
15
17
17
16
17
16
15
15
18
18
21
22
15
14
16
15
16
19
16
16
16
16
16
14
14
14
14
14
14
15
15
Free Height mm
A
B
408
408
440
440
390
375
365
365
375
375
395
395
375
375
385
385
395
395
365
365
435
425
420
410
400
390
390
390
390
390
390
390
405
395
395
385
340
340
380
380
410
410
313
313
370
370
295
295
400
390
400
390
420
420
390
390
330
330
345
345
350
340
330
320
430
430
430
430
385
385
360
360
395
395
345
345
385
385
392
392
394
394
410
410
420
420
475
465
510
500
480
470
495
485
510
500
420
410
420
410
400
400
87
Number
Of Coils
9.0
10.0
8.5
10.2
10.2
10.2
10.6
10.6
10.6
10.7
10.2
10.0
10.0
6.8
6.8
6.8
7.8
7.5
8.4
7.3
6.8
6.0
5.3
7.3
7.5
7.5
10.8
9.3
8.2
8.2
7.3
7.3
10.8
8.0
6.8
7.5
6.8
8.2
10.8
10.8
10.3
6.8
10.8
9.8
11.9
11.2
11.2
10.0
9.8
10.0
7.3
Coil weight
Kg
4.5
8.7
3.7
4.7
4.7
4.7
5.7
5.7
5.7
5.7
5.7
6.4
8.1
5.6
6.4
7.2
5.8
6.3
5.4
5.3
4.4
4.7
5.2
4.5
7.0
7.0
5.6
4.8
5.0
5.5
8.6
9.5
5.7
3.6
5.3
4.7
5.3
6.2
5.4
5.4
5.2
5.0
6.6
3.9
5.1
4.8
4.8
4.0
4.1
4.9
4.3
Spring Rate
lbf / in
N / mm
220
38.5
240
42
200
35
500
88
500
88
500
88
590
103
590
103
590
103
590
103
190
33
210
37
380
68
260
45.5
318
55.7
387
67.8
180
31.5
220
38.5
650
113.8
210
36.8
170
29.8
360
63
213
37.3
368
64.4
150 - 260
26 - 45.5
140 - 230
24.5 - 40
180 - 300
31.5 - 52.5
180 - 300
31.5 - 52.5
650
114
650
113.8
700 - 900
122 - 157
860 - 1000 150 - 175
200 - 280
35 - 49
190
33
200
35
140
24
200
35
790
138
375
65.7
375
65.7
400
70
200
35
240 - 300
42 - 52.5
160
28
140
24.5
140
24.5
140
24.5
180
31.5
180
31.5
220
38.5
220
38.5
cont.
SPECIFICATIONS
COIL SPRINGS
Spring Number
OME938
OME940
OME941
OME942
OME943
OME944
OME945
OME947
OME948
OME949
OME950
OME951
OME952
OME953
OME954
OME955
OME956
OME959
OME960
OME961
OME962
OME963
OME965
OME966
OME967
OME968
OME970
OME971
OME972
OME972E
OME973
OME974
OME974E
OME975
OME976
OME980
OME981
OME982
OME983
OME984
OME985
OMEGQ02A
OMEGQ02AM
OMEGQ02B
OMEGQ02C
OMEGQ02CM
OMEGQ02D
OMEGQ02G
OMEGQ02J
OMEGQ02LP
Bar Dia.
mm
18
14
15
16
15
16
16
16
16
17
16
15
12
16
13
13
16
16
15
13
16
11.5
11.5
12
12
14
18
18
17
17
17
17
17
17
17
19
21
19
20
21
22
18
19
19
18
17
18
19
20
19
Free Height mm
A
B
400
390
380
370
390
375
380
365
370
360
395
385
350
340
340
340
340
340
370
355
300
300
290
290
345
345
285
285
335
335
350
350
330
330
310
310
300
300
340
340
320
320
350
350
365
365
325
305
325
325
370
370
400
385
410
395
400
385
400
400
415
400
385
370
385
385
425
410
440
425
490
470
480
460
470
450
485
455
485
455
480
460
465
465
505
490
445
445
480
465
485
470
480
480
475
460
480
465
475
445
88
78
Number
Of Coils
7.5
8.6
7.2
7.4
8.6
8.0
7.5
5.8
5.6
7.1
8.5
8.5
11.0
8.5
11.0
10.0
8.5
8.5
8.5
10.0
8.5
10.0
10.0
9.0
9.0
9.4
8.0
8.0
8.0
8.0
8.0
8.0
8.0
9.0
9.0
9.0
9.0
9.0
9.0
9.0
8.1
9.0
10.0
9.0
9.0
8.9
9.0
9.0
9.0
9.0
Coil weight
Kg
7.7
3.8
4.4
5.2
4.4
4.5
4.7
4.5
4.3
5.7
4.1
3.6
2.5
4.3
2.5
3.1
2.8
4.1
3.7
3.0
4.1
2.4
2.4
2.4
2.4
4.0
6.9
6.9
6.2
6.3
6.2
6.2
6.3
7.0
7.0
10.1
11.2
10.1
11.0
12.3
12.5
9.2
8.9
10.3
8.9
7.9
9.2
10.0
11.2
10.0
Spring Rate
lbf / in
N / mm
205 - 290
36 - 51
190
33
140
24.5
160
28
230
40.3
190
33
240
42
170
29.8
200
35
216
37.8
540
95
440
77
140
24.5
540
94.5
180
31.5
200
35
500
88
540
94.5
440
77
200
35
540
95
146
25.6
146
25.6
176
30.8
176
30.8
210
36.8
320
56
320
56
250
44
250
44
250
44
250
44
250
44
220
38.5
220
38.5
250 - 370
43.9 - 64.9
300 - 440
52.6 - 77.2
250 - 370
43.9 - 64.9
300 - 400
52.6 - 70
360 450
63 - 79
470
82.3
200
35
220 - 240
38.5 - 42
250 - 280
44 - 49
200
35
170 - 190
30 - 33
200
35
220 - 350
38.5 - 61
280 - 310
49 - 58
250 - 280
44 - 49
SPECIFICATIONS
OLD MAN EMU POLYURETHANE
SPRING BUSH DIMENSIONS
Dimensions
Part No.
PT229
PT230
PT231
PT231A
PT240
PT260
PT261
PT270
PT280
PT281
PT282
PT283
PT284
PT285
PT290
PT291
PT292
PT293
PT301
PT302
PT303
PT304
PT305
PT306
PT307
PT308
PT309
PT310
PT311
PT312
PT313
PT314
PT315
PT316
PT317
PT318
PT319
PT320
PT321
PT322
PT323
PT326
D1
32.0
32.0
36.0
38.0
36.0
45.0
45.0
50.0
44.0
44.0
52.0
44.0
32.7
32.7
45.0
40.0
40.0
45.0
50.0
40.0
40.0
52.0
43.0
44.0
50.0
46.0
40.0
42.0
52.0
43.0
40.0
44.0
40.0
43.0
52.0
52.0
52.0
44.0
44.0
40.0
40.0
42.0
D2
24.9
24.9
30.0
30.0
30.0
35.0
35.0
40.0
32.7
32.7
40.0
32.7
None
None
31.5
28.0
27.5
31.5
40.0
30.0
29.5
40.0
31.5
31.4
37.6
35.0
30.0
32.6
40.0
31.5
28.0
32.0
32.7
31.5
39.8
39.8
40.0
31.8
31.8
32.0
30.0
33.0
d
15.0
15.0
18.0
18.0
18.0
18.0
15.0
18.0
18.0
18.0
18.0
18.0
16.0
22.0
18.0
16.0
16.0
14.0
16.0
13.0
13.0
19.0
19.0
18.1
18.1
18.1
18.0
20.1
22.2
19.0
16.0
18.0
22.2
22.2
18.0
20.0
18.0
18.0
18.0
18.0
18.0
20.1
T
4.5
3.0
3.6
4.0
4.0
5.5
4.0
5.4
5.2
4.5
4.4
5.8
None
None
4.4
5.0
4.2
4.4
6.9
4.4
4.4
4.0
5.5
6.0
6.0
4.0
4.0
4.0
4.5
4.8
5.0
4.5
4.0
5.0
6.0
8.0
8.0
6.5
4.3
4.0
4.5
4.0
89
L
35.0
35.0
30.0
35.0
48.0
35.0
35.0
35.0
43.0
30.0
30.0
28.5
57.5
60.0
35.0
44.0
34.0
34.0
25.0
25.0
24.5
30.0
35.0
30.0
30.0
35.0
40.5
30.0
30.0
35.0
45.0
40.0
30.0
35.0
43.5
35.5
35.5
31.5
32.7
45.5
35.5
30.0
Number of Splines
9
9
9
9
9
11
9
13
11
11
13
13
0
0
11
9
9
11
13
9
0
9
0
9
0
9
0
0
9
0
0
0
9
0
9
9
9
9
9
9
9
9
APPLICATIONS
NUMERICAL SPRING & SHOCK BUSH
OMESB1
spring bush PT260
6
Toyota 35mm spring eye, 18mm pin OE & OME
Series F/H/B, J/ZJ: 75, 74, 73, 70, 60, 47, 45, 42, 40
Nissan GQ Patrol leaf spring models OME only
OMESB2
spring bush PT280
2
Nissan MQ Patrol all models - rear OE spring
spring bush PT281
2
OMESB3
spring bush PT282
2
OMESB4
spring bush PT230
4
Toyota F/HJ40, 45 - 25mm spring eye
spring bush PT229
2
front spring
spring bush PT240
2
Toyota HiLux all models (except IFS front)
OMESB5
Nissan MQ Patrol round headlight models-front OE spring eye
spring bush PT231
4
OMESB6
spring bush PT231
6
OMESB7
spring bush PT231A
6
Toyota FJ55 all models front & rear OE springs
OMESB8
spring bush PT290
2
Mitsubishi Pajero leaf spring models & L200 models
spring bush PT291
2
Toyota HiLux all models (except SR5 & extra cab rear)
spring bush PT292
2
OMEB9
shock bush SP1178 / 19
4
Small eye bush with 19mm bore
OMEB10
shock bush SP056 (cotton reel type)
2
OMEB11
shock bush OME066 / 16
4
Small eye shock mount
Converts large eye 19mm bore to a 16mm bore
OMEB12
shock bush SP092
4
Pin 12 x 60 replacement bush
OMEB13
shock bush SP091
4
Pin 10 x 60 replacement bush
OMEB14
4
Small eye with 16mm bore
OMEB15
4
Large eye with 19mm bore
OMESB16
spring bush PT270
6
40mm spring eye for Toyota 75 series rear springs
OMEB17
2
Large eye tapered bush with sleeve
sleeve B17S 22 x 16 x 33
2
OMEB18
2
2
spring bush PT301
2
spring bush PT302
4
OMESB19
Converts small eye bush to suit 19mm bore with sleeves
Suzuki Sierra all models except LJ50 front & rear springs
1
OMESB20
spring bush PT229
6
Toyota LandCruiser 40 series 25mm OE spring front & rear
OMESB21
spring bush PT260
2
LandCruiser 40 series OE 35mm spring eye
spring bush PT261
4
when ES01 extended shackles fitted
OMEB24
shock bush OME 066 / 16
2
2
sleeve B22S-1 16 x 12 x 40
2
sleeve B22S-2 22 x 20 x 43
2
cont.
90
APPLICATIONS
Kit No.
Component Description
OMESB25
spring bush PT301
2
spring bush PT302
2
spring bush PT303
2
sleeve 16 x 13 x 65
1
sleeve 16 x 13.2 x 33
2
OMEB27
Qty
To Fit
Suzuki LJ50 front & rear
N41 & N81 being converted for fitment to CJ Jeep and
Cherokee wagon 83 on front bottom mount. Mahindra
front & rear bottom mount.
OMESB28
spring bush PT284
2
Nissan MQ Patrol early model (round headlights)
- front spring, front eye (to be fitted with OMESB29)
OMESB29
spring bush PT285 & sleeve
1
Nissan MQ Patrol all models
OMESB30
spring bush PT261
4
Toyota LandCruiser 45/47 series front spring with 35mm
spring bush PT229
2
spring eye and hanger bracket with 15mm pin hole
OMESB31
spring bush PT283
2
Nissan MQ Patrol late model (square headlights)
- front spring, rear eye (to be fitted with OMESB28)
- front spring, front eye (to be fitted with OMESB29)
OMEB36
2
large eye 19mm bore
OMESB38
spring bush PT292
2
All Triton to 1997 and L200 - rear - suits OME
spring bush PT291
2
springs only
spring bush PT305
2
sleeve 19 x 14.2 x 81
1
OMEB40
shock bush OME 066-19MGQ
2
N101, N22F & N29 Patrol GQ lower mount - rear shock
OMEB42
shock bush 305IY
8
pin 14 x 70 replacement
OMESB43
spring bush PT304
2
Toyota HiLux IFS extra cab & SR5 dual cab models
spring bush PT309
2
being fitted with OME18 series spring
spring bush PT231
2
sleeve 19 x 14.1 x 68
1
spring bush PT306
4
OMESB57
Jeep Wrangler - front & rear to suit OE shackles
spring bush PT307
2
sleeve 19 x 15 x 73
1
OMESB64
PT270 spring bush
4
PT260 spring bush
2
OMESB75
spring bush LA118
2
Land Rover series III 88" & 109"
spring bush LA119
4
spring & shackle bushes OE replacement - front
sleeve 19 x 14.3 x 91
1
sleeve 19 x 15 x 70
2
spring bush LA119
6
Land Rover series III 88" & 109" spring &
sleeve 19 x 15 x 70
3
shackle bushes OE replacement - rear
OMESB77
shock bush LRR010
4
Land Rover series III 88" & 109" lower shock bush- rear
OMEB78
steering stabiliser bush Y2375
4
Pin 10 x 60mm steering stabiliser mount
OMESB79
spring bush PT308
4
LandCruiser F/HJ45, 47 LWB models - OME spring
spring bush PT231A
2
OMESB76
Nissan Patrol GQ leaf spring cab chassis OME spring - rear
cont.
91
APPLICATIONS
Kit No.
Component Description
OMESB80
spring bush PT304
2
Holden / Isuzu Rodeo 1 tonne
spring bush PT231
4
rear spring to suit OE & OME springs
OMESB81
OMESB82
OMESB83
OMESB84
OMESB85
OMESB86
Qty
To Fit
sleeve 19 x 14 x 68
1
spring bush PT310
4
Nissan Navara 1 tonne
spring bush PT311
2
rear spring to suit OE & OME springs
sleeve 22 x 18 x 70
1
spring bush PT281
2
Mazda / Ford 1 Tonne 4x4
spring bush PT314
2
1987 on rear spring OE & OME
spring bush PT315
2
sleeve 22 x 17 x 68
1
spring bush PT291
2
Mitsubishi Challenger / Montero
spring bush PT292
2
rear spring to suit OME19 only
spring bush PT316
2
sleeve 22 x 16 x 80
1
spring bush PT317
2
Toyota LandCruiser 79 Series cab chassis & utility model only
spring bush PT318
4
suit OME springs only
sleeve 20 x 14 x 86
2
spring bush PT270
4
spring bush PT317
2
must be used with OME springs & greasable shackle kit only
spring bush PT317
2
Toyota LandCruiser 78 Series Troop Carrier only - rear
spring bush PT318
2
suit OME springs only
spring bush PT319
2
Toyota LandCruiser 78 & 79 Series
sleeve 20 x 14 x 86
1
spring bush PT307
2
Jeep YJ Wrangler front and rear
spring bush PT320
2
Use only with greasable shackle OMEGS11
spring bush PT321
2
sleeve 19 x 15 x 73
1
OMESB88
spring bush PT322
2
spring bush PT323
2
Use with OME springs
OMESB89
spring bush PT322
2
Toyota Tacoma rear shackle bushes
spring bush PT323
2
for OEM shackles
sleeve 18 x 14 x 69
1
OMESB90
spring bush PT231
4
spring bush PT282
2
rear OME spring
OMESB91
spring bush PT310
2
Nissan Navara D22 model - rear spring
spring bush PT311
2
to suit OE & OME springs
spring bush PT326
2
sleeve 22 x 18 x 70
1
spring bush PT328
2
Toyota HiLux 2005 on
spring bush PT329
2
to suit OE & OME springs
spring bush PT330
2
sleeve 19 x 14 x 72
1
OMESB87
OMESB98
92
Toyota Tacoma rear shackle bushes only
Holden/Isuzu Jackaroo Trooper 1982-92
SPECIFICATIONS
STEERING STABILISERS
Part Number
OMESD01
OMESD02
OMESD11
OMESD16
OMESD17
OMESD21
OMESD22
OMESD23
OMESD24
OMESD30
OMESD31
OMESD32
OMESD33
OMESD34
OMESD35
OMESD36
OMESD40
Upper Mount Type (mm)
Eye with Bush
Eye with Bush & Sleeve
Pin 60 x 9.5
Pin 60 x 9.5
Eye with Bush
Pin 60 x 9.5
Eye with Bush
Eye with Bush
Eye with Bush
Pin 60 x 9.5
Eye with Bush & Mounting Pin
Pin 60 x 9.5
Eye with Bush
Lower Mount Type (mm)
Eye with Bush
Pin 60 x 9.5
Pin 60 x 9.5
Eye with Bush
Eye with Bush
Eye with Bush
Eye with Bush
Eye with Bush
Eye with Bush
Eye with Bush
Pin 60 x 9.5
93
Open
Closed
Length Length
(mm)
(mm)
552
342
655
394
516
308
535
314
622
373
542
340
537
328
454
316
651
417
448
290
577
392
680
440
611
364
575
347
503
311
484
289
499
309
Mounting Kit No.
142885
No Kit
142881
142881
141264 / 140629
142281 / 142884
No Kit
142885
142885
No Kit
No Kit
500565
142884
No Kit
No Kit
142281
500498
No. of
Kits
OME Bush Kit
1
2
2
1
1
OMEB14
1
1
OMEB10 & B32
OMEB10 & B32
1
1
OMEB10 & B32
2
1
TORSION BAR FITTING HINTS
TORSION BAR REMOVAL
1. Before removing the original Torsion bars, the vehicle's front and rear
rim to guard measurements must be taken and noted down,
as per image A.
Image A: Ride height is measured from the bottom of the rim to the
wheel arch vertically through the centre of the hub.
A
2. Using either a hoist or axle stands, raise the vehicle so that the front
suspension is off the ground.
3. Image B: After cleaning and lubricating the two adjusting bolts, in the
ADJUSTING BOLT
torsion bar anchor arms, measure and note the amount of thread
protruding through the lock nut.
4. Using only hand tools loosen and remove the adjusting bolts.
5. Remove torsion bar and anchor arm assembly. Slide anchor arm
and dust covers (if applicable) off the torsion bars.
TORSION BAR ANCHOR ARM NUT
B
6. Thoroughly clean the anchor arms, adjusting bolts and dust covers.
TORSION BAR INSTALLATION
7.
Image C: As each OME torsion bar is preset they are marked (LH) and
(RH) and because of this they must only be installed as marked.
LH -to the left hand side.
As viewed from the driver's seat:
RH -to the right hand side.
8. Image D: Where there is a master spline on the torsion bars (shown
C
in white) on installation they must be aligned to the anchor arms.
Where the torsion bars have the same spline sizes at each end,
the torsion bar can be installed with either end to the front.
9. Slide the dust cover (if applicable) over the Old Man Emu torsion bars
and apply grease to all splines and threads.
10. Install the torsion bar and align the anchor arm so the adjusting bolt
D
is just protruding through the anchor nut. If required, the torsion bar
can be rotated one spline at a time to adjust the position of the
anchor arm.
11. Tighten the adjusting bolts so the same amount of thread,
as noted in step 3, protrudes. Install dust covers.
12. Lower the vehicle back onto its wheels and drive a short distance
to settle the front suspension.
94
TORSION BAR FITTING HINTS
TORSION BAR ADJUSTMENT
NB - All torsion bar adjustments must be done with the vehicle raised off the ground and the front
suspension hanging. Do NOT adjust the torsion bars with the vehicle wheels on the ground.
13. Image E: Park the vehicle on level ground and measure the vehicle's rim to guard measurements.
14. Use the torsion bar anchor arm adjusting bolt to raise or lower the vehicle's ride height, also to trim the
vehicle from side to side, to the desired height.
FRONT SUSPENSION DROOP CHECK
15. To maintain good drive shaft, ball joint angles and to stop constant front suspension top out,
it is important to check after adjusting the vehicle's ride height, that the vehicle has enough front
wheel droop.
Generally, a vehicle must have a minimum of 50 to 70mm of downward wheel travel (droop)
16. Image E: Front suspension droop is checked by taking the vehicle's front rim to guard measurement,
while the wheels are on the ground and noting it down.
Image F: Then raise the front until the wheels are off the ground and take another rim to guard
measurement and note it down.
By subtracting the E image measurement from the F image measurement, the amount of droop
will be obtained. Carry out any adjustment that may be required.
17. All vehicles will require a headlight, front end alignment, and tyre pressure check after the fitment of
new torsion bars.
F
E
95
RECOMMENDED FITTING TIMES
COIL SPRINGS SYSTEMS
All Coil Spring Models (Except Land Rovers)
2.0 hours
Fitment of 4 Nitrochargers & 4 OME coil springs
Land Rover All Coil Spring Models
2.5 hours
Fitment of all the above plus additional time to remove front shock absorber towers
Torsion Bar Front with Rear Coil Suspension
2.0 hours
Fitment of 4 Nitrochargers, 2 OME coil springs & front torsion bar adjustment
Coil Front with Rear Leaf Suspension
3.5 hours
Fitment of 4 Nitrochargers, 2 OME coil springs & 2 OME Leaf springs
Coil Over Front Strut with Rear Coil Suspension
3.0 hours
Fitment of 2 Nitrochargers, 2 OME struts & 4 OME coil springs
Coil over Front Strut with Leaf Rear Springs
4.0 hours
Fitment of 2 Nitrochargers, 2 Struts, 2 Coils & 2 Leaf Springs
LEAF SPRING SYSTEMS
All Leaf spring Models (Except HiLux)
5.0 hours
Fitment of 4 Nitrochargers, 4 OME Leaf Springs, and U bolts and spring bushes as required
Toyota HiLux All Leaf Spring Models
6.0 hours
Fitment of all the above plus additional work required to strengthen front spring seat mount
Front Torsion Bar with Rear Leaf Spring Models
3.0 hours
Fitment of 4 Nitrochargers, 2 OME rear leaf springs, U bolts, spring bushes and
front torsion bar adjustment
CARTRIDGE REPLACEMENT
Additional work required to install cartridge per strut
0.5 hours
TORSION BARS
Remove and replace a set of Bars (no removal complications)
1.5 hours
Remove and replace a set of Bars (removal complications eg. OE splines corroded)
2.5 hours
MISCELLANEOUS
Caster kits
2.0 hours
Steering stabilisers
0.5 hours
Greasable shackles (complete vehicle set)
2.0 hours
FRONT END WHEEL ALIGNMENT ADJUSTMENTS
Price
Live axle front end
$45.00
Greasable shackles (complete vehicle set)
$66.00
The above fitting times are only a guide, and additional time may be involved due to vehicle modifications or
pre-existing accessories which can interfere with the fitment of the suspension.
96

REAR

Transcription

Similar documents

Johnny Tremain by Esther Forbes Objectives

5125 Install.qxd

For Sale – a rare gem along the Klaserie River.

MC2 February March 2012

Click Here to load a PDF with ads and articles about the 1935

Gravlax Kit Guide and Information

suzuki boulevard s40

LGOBO SALE SHEET

The wardrobe malfunction — it`s a Hollywood moment that

KYMCO Grandvista 250