www.smartdesks.com A S S E M B L Y I N S T R U C T I O N S For

MiraVista
™
A S S E M B L Y
I N S T R U C T I O N S
For technical support, please
contact SMARTdesks:
800-770-7042
Scan QR Code with smartphone for
instant response.
shaping conferencing & educationsm
www.smartdesks.com
© 2011 CBT Supply, Inc. All rights reserved. SMARTdesks® is a registered trademark of CBT Supply, Inc.
MATERIAL:
FINISH:
1-1/2 X 4 POPLAR FPA SUPPORT
SECTION "A-A" A
8.000
1-1/2 X 4 POPLAR FPA SUPPORT
FPA
30.000
30.000
30.000
FPA
EDGE:
30.000
A
6.000
6.000
A
36.000
30.000
A
36.000
36.000
36.000
Single MiraVista Computer
Desk
SMV-363030-TKF
6MM TEMPERED
GLASS
B
SECTION "B-B"
30.000
B
6MM TEMPERED GLASS
B
30.000
B
These top and side view drawings should help with parts identification. Section A-A shows the spatial location of the poplar hardwood
support beam for the FPA Flat Panel Arm, keyboard tray and CPU stage.
MiraVista™ is assembled with pins and cams using a Phillips #2 driver.
KEYBD - X32370
SYM DATE BY
REVISIONS
DESCRIPTION
TOLERANCES PART
UNLESS SPECIFIED
NAME
OTHERWISE
SMV-363030-TKF
DATE:
SCALE:
:_____ CHK'D BY:
DECIMALS
.X
.XX
:_____
.XXX :_____
ANGLE :_____
DRWN -BY:
KEYBD
X32370
CAD NO.
CNC NO.
NOTICE: This drawing is the property of CBT Supply, Inc. dba SMARTdesks
and contains proprietary information that is not to be usedexcept in
the consideration of bids or proposals tendered herewith. Reproductions
or copying of the drawing, in whole or in part, is prohibited.
514F Progress Drive
Linthicum, MD 21090
800.770.7042
www.Smartdesks.com
PRODUCT
GROUP
DRAWING NO.
PO# 5124
REV.
Note the locations of the side
panel wire grommets and the
wire management J channels,
which are mounted flush with the
bottoms of the modesty panels.
Power outlet strips are mounted
on the modesty panels, above
the J channel wire management
troughs.
Pilot holes are provided for the
mounting of keyboard trays, using
1/2” #8 thread Phillip’s drive wood
screws.
2X 1-1/2 X 4 POPLAR FPA SUPPORT
FPA
30.000
A
FPA
WIRE MANAGEMENT
30.000
30.000
WIRE MANAGEMENT
6.000
6.000
A
66.000
26.750
66.000
SECTION "A-A"
6MM TEMPERED GLASS
B
30.000
19.563
30.000
B
19.563
KEYBD - X32370
KEYBD - X32370
30.000
SECTION "B-B"
SYM DATE BY
REVISIONS
DESCRIPTION
TOLERANCES PART
UNLESS SPECIFIED
NAME
OTHERWISE
DMV-663030-P
DATE:
SCALE:
:_____ CHK'D BY:
DECIMALS
.X
.XX
:_____
.XXX :_____
ANGLE :_____
DRWN BY:
CAD NO.
CNC NO.
NOTICE: This drawing is the property of CBT Sup
and contains proprietary information that is no
the consideration of bids or proposals tendered
or copying of the drawing, in whole or in part,
Assembly approach:
On a carpet or furniture blanket, place the desktop on the floor face
down.
Install the side panels to the top, pushing the plastic fittings into the
holes provided. Tighten set screws (#2 Phillips) to lock the pieces together. Do not overtighten.
These plastic fittings come apart, install in the sides and
top with the screw part in the sides. Capture the fittings
and tighten the screw.
Assemble tabs to the keyboard trays tabs in. Use the
thrid hole from the bend and see if this fits your keyboard. Install the keyboard tray with 1/2” #8 thread wod
screws.
On the modesty panel, align the cam arrows with the holes, then insert the
pins and tighten with a #2 Phillips driver.
Make a sub assembly of the CPU stages, assembling with pins and cams., then install
to side panels with pins and cams.
Spin in the floor
glides all the way,
then see if you
need to make
adjustments when
the desk is installed
in its final position.
Sub assemble the Flat Panel Arm to the hardwood board that serves
as a support beam. Install with wod screws. Install the assembly to
the desk sides and center panel with pins and cams.
The VESA mount is universal for installation of LCD monitors at
100mm or 75mm mounting hole locations using your monitor’s
mounting screws.
The double desk has a center support panel which installs with pins
and cams. The FPA arm supports are installed into it using doubleended pins. For this reason, you need to assemble the arm supports
together with the center support and install this as one piece into
the modesty panel, top and sides.
Turn unit over and place it on its feet.
Place plate glass into viewing frame.
For technical support, please
contact SMARTdesks:
800-770-7042
Scan QR Code with smartphone for
instant response.
shaping conferencing & educationsm
www.smartdesks.com