Brochure

Transcription

Brochure

Contents
AIR COMPRESSORS
2
AIR TOOLS
4
BATTERY CHARGERS & BOOSTER PACKS
7
CABLE AVOIDANCE & CABLE REELS
8
CLEANING EQUIPMENT
10
COMPACTION
12
CONCRETE CUTTING SAWS
15
CONCRETE FINISHING
17
DEHUMIDIFIERS
20
ACCESSORIES
21
FLOOR FINISHING & EQUIPMENT
25
GARDENING CARE EQUIPMENT
27
GENERAL PURPOSE ENGINES
29
GENERATORS
33
HEATING & COOLING
41
HYDRAULIC & PNEUMATIC BREAKING
45
LOG HOLDERS & SPLITTERS
48
PAINTING & DECORATING
51
PLUMBING
52
POWER TOOLS
53
POWER WASHERS
68
SITE LIGHTING & ELECTRICAL ACCESSORIES
72
TRAFFIC SIGNALS
73
WATER PUMPS
74
WELDING EQUIPMENT
76
www.disc.ie
1
Air Compressors
DIRECT DRIVE Lubricated
A range of air compressors consisting of various models
designed for professionals.
BELT DRIVE Lubricated
The series of FIAC piston compressors with belt transmission
from 2 to 20 HP are equipped with the powerful and reliable
two-cylinder, single stage and two stage AB compressor
units, already lubricated with oil.
COSMOS 225 / 255
AB 200/388 MC
AB 100/248 MC
COSMOS 225 / 255
PROFESSIONAL 8 PCS AIR KIT
AB 300/550 TF
2
MODEL
HP
TANK
SIZE L
VOLT
AIR DELIVERY
CFM
Cosmos 225 (Direct Driven)
2
24
230/50/1
6
Cosmos 255 (Direct Driven)
2
50
230/50/1
6
AB 100/248 MC (Belt Driven)
2
100
230/50/1
8.8
AB 200/338 MC (Belt Driven)
3
200
230/50/1
11.6
AB 300/550 TF (Belt Driven)
5.5
300
400/50/3
19.4
www.disc.ie
Air Compressors
The CompAir range includes portable
compressors and compressed air
tools for construction, along with
stand-alone compressor packages for
many other industrial applications.
PORTABLE AIR COMPRESSORS
COMPAIR C50
AIR COMPRESSOR 180 CFM
COMPAIR C30
AIR COMPRESSOR 108 CFM
Working weight (wet)
Volume flow1) m3/min.
Operating pressure
Compressed air outlets
Free air delivery at 7 bar
Rated operating pressure
Oil capacity-compressor system
Outlets 3/4 " BSP Female
Full load speed
Output at rated speed
Fuel tank capacity
Volume flow C.F.M
C30
C50
735
3.02).
7
2 x 3/4″
3.0 m3/min (106ft3/min)
7 bar
9 litres
2
3000 R.P.M.
22.6 Kw. (30.3 bhp).
40 litres
108
875
5.0
7
2 x 3/4″
4.8 m3/min (172 ft3/min)
7 bar
13.6 litres
3
3600 R.P.M.
33.8 Kw (45.3 bhp).
66 litres
180
www.disc.ie
3
Air Tools
CT4S
CHIPPING HAMMER / DRILL
CT5S
CHIPPING HAMMER
Hz
Series
Description
Gas Compressed
Air Consumption (m3 per min)
Noise Level (db)
Length (mm)
Width (mm)
Weight (Kg)
Shank / Chuck size (mm)
Impact Rate (bpm)
Vibration Level (m/sec x 2)
Cooling System
CT11V
MEDIUM AIR
HAMMER
Hz
Series
Description
Gas Compressed
Air Consumption (m3 per min)
Power Comsumption (kW)
Noise Level (db)
Length (mm)
Weight (Kg)
Shank / Chuck size (mm)
Impact Rate (bpm)
Impact Power (J)
Vibration Level (m/sec x 2)
Retainer Type
Silenced/Non-Silenced
Handle Type
Cooling System
4
CT5S
50
Tools
Tools
Air
0.25
98
353
206
4
19hex x 50
2700
8
air cooled
50
Tools
Tools
Air
0.69
107
355
206
5
19hex x 50
2580
9.27
air cooled
CTVRS2
LARGE AIR
HAMMER
CT28V
LARGE AIR
HAMMER
CT11S
MEDIUM AIR
HAMMER
CT4S
1UF
POLE SCABBLER
CT11S
CT11V
CT28V
CTVRS2
50
Tools
Tools
Air
0.84
45
108
500
11.1
22 x 82 Hex
1620
45
15.8
Latch
Yes
'D'
air cooled
50
Tools
Tools
Air
1.11
45
104
550
13
22x82 Hex
1620
45
4.5
Latch
Yes
'D'
air cooled
50
Tools
Tools
Air
1.56
92
106
712
32
32x160 Hex
960
92
4.8
Latch
Yes
A/V’T’
air cooled
50
Tools
Tools
Air
1.56
92
87
712
28.4
32x160 Hex
960
92
3.4
Latch
Yes
A/V’T’
air cooled
www.disc.ie
For use in awkward
corners and edges
where walls and floor
surfaces meet.
Dimensions: 1320 x
75mm
Weight 13kg.
Piston diameter 38mm.
Bit diameter 57mm.
Hose: ½ npt.
Air Tools
GISON GAS617
SUCTION LIFTER
ABS Handle
2 Pcs 2-Cup Straight Suction
Twins w/Ratchet Tie Down
Lift Capacity :
160 kgs
Ratchet Tie Down
Length :
123 ~ 462 cm
Breaking Strength 484 kgs
Packing: 6 pcs/2.2 cu.ft/G:12 kgs
GISON GP836C
AIR DRILL
Capacity :
1/2"
Max Speed :
800 rpm
Net Weigth :
1.76 kg
Length :
203 mm
Air Cons. :
0.33 m3/min
Air Inlet :
1/4"
Hose Size :
6.5 mm
Sound Pressure :
90 dBA
Air Pressure :
90 psi
Vibration :
< 2.5 m/S2
GISON GAS619
SUCTION LIFTER
Weight :
1,340 g
Lift Capacity :
80 kgs
Diameter :
123 mm
Bear Capacity :
Three-grip fix style
To plate with chromiun
Packing : 10 pcs/3.1 cu.ft/G:17 kgs
GISON GP840S
AIR DRILL
Capacity :
3/8"
Max Speed :
1,800 rpm
Net Weigth :
1.20 kg
Length :
177 mm
Air Cons. :
0.38 m3/min
Air Inlet :
1/4"
Hose Size :
6.5 mm
Sound Pressure :
87 dBA
Air Pressure :
90 psi
Vibration :
< 2.5 m/S2
www.disc.ie
GISON GP815C
AIR NEEDLE SCALER
Needle x pc :
3 mm x 49
Stroke Speed :
2,500 bpm
Net Weight :
5.0 kg
Length :
508 mm
Air Cons. :
0.25 m3/min
Air Inlet :
3/8"
Hose Size :
8 mm
Sound Pressure :
105 dBA
Air Pressure :
90 psi
Vibration :
23.0 m/S2
GISON GP923A
3 HEAD SCABBLER
Piston Stroke :
22.5 mm
Stoke Speed :
2,800 bpm
Net Weight :
3.90 kg
Length :
496 mm
Air Cons. :
0.33 m3/min
Air Inlet :
3/8"
Hose Size :
8 mm
Sound Pressur :
92 dBA
Air Pressure :
90 psi
Vibration :
13.3 m/S2
Packing: 4 pcs/2.3 cu.ft/G:20.5 kgs
5
Air Tools
GISON GW-18D
AIR IMACT WRENCH
Mechanism : Pin Clutch
Square Drive :
1/2"
Bolt Capacity :
16 mm
Max. Torque :
380 ft.lb (515 Nm)
Net Weight :
2.70 kg
Length :
190 mm
Air Cons. :
0.22 m3/min
Air Inlet :
1/4"
Hose Size :
10 mm
Soune Pressure :
88 dBA
Air Pressure :
90 psi
Vibration :
<2.5 m/S2
6
GISON GW-19R
AIR IMACT WRENCH
Handle Exhaust
Mechanism :
Twin Hammer
Square Drive :
1/2"
Bolt Capacity :
18 mm
Max. Torque :
430 ft.lb (588 Nm)
Net Weight :
2.67 kg
Length :
175 mm
Air Inlet :
1/4"
Air Cons. :
0.23 m3/min
Hose Size :
6.5 mm
Soune Pressure : 83 dBA
Air Pressure :
90 psi
Vibration :
4.8m/S2
Packing : 8pcs/1.3 cu.ft/G:24.5 kgs
GISON GW-38L
AIR IMACT WRENCH
GISON GW-38P
AIR IMACT WRENCH
Mechanism :
Pin Hammer
Square Drive :
1"
Bolt Capacity : 40mm
Max. Torque :
1,400 ft.lb (1,900 Nm)
Net Weight :
12.50 kg
Length :
570 mm
Air Cons. :
0.58 m3/min
Air Inlet :
3/8"
Hose Size :
13 mm
Air Pressure :
90-115 psi
Vibration :
8.2 m/s2
Packing: 2 pcs/1.5 cu.ft/G: 27.5 kgs
Mechanism :
Pin Hammer
Square Drive :
1"
Bolt Capacity :
40 mm
Max. Torque :
1,400 ft.lb (1,900 Nm)
Net Weight :
10.20 kg
Length :
270 mm
Air Cons. :
0.58 m3/min
Air Inlet :
3/8"
Hose Size :
13 mm
Sound Pressure : 93 dBA
Air Pressure :
90 psi
Vibration :
7.5 m/s2
Packing: 2 pcs/0.92 cu.ft/G: 21 kgs
www.disc.ie
GISON GW-24D
AIR IMACT WRENCH
Mechanism :
Pin Clutch
Square Drive :
3/4"
Bolt Capacity :
27 mm
Max. Torque :
800 ft.lb (1,085 Nm)
Air Inlet :
1/4"
Air Cons. :
0.30 m3/min
Hose Size :
10 mm
Length :
248 mm
Net Weight :
4.90 kg
Air Pressure :
0 psi
Vibration :
3.5 m/S2
Battery Chargers & Booster Packs
CA 10
CD 50R
CB 18
CD 600R
CA10
CB18
CD50R
CD 600R
Input Voltage (V)
Rated Working Capacity (Kw)
230
100w
230
200w
Max Starting Current (A)
Charge Voltage
Effective Charging Current (A)
Rated Charging Current (A)
Fuse (A)
Weight (Kg)
Size (Cm)
6 / 12
8
4.2
25 X 22 X 13
12 / 24
14 / 9
8/5
7.2
26 X 23 X 19.7
230
1.2kw Charge
7kw Start
180
12 / 24
45
35
16
14.5
32.5 X 31 X 21.5
230
2kw charge
12kw start
360
12/24
90
60
20
26
40.5 x 31.5 x 61.5
12 / 24 VOLT BOOSTER PACK
Voltage (DC Volts)
Cranking Amp
Peak Amp
Battery
Internal Battery Status Display
Charging Mode
Power Outlet
Worklight
Weight (G.W.)
12 VOLT BOOSTER PACK
12/24V BOOSTER PACK
12V BOOSTER PACK
12V/24V
1200A-12V/600A-24V
2400A-12V/1200A-24V
2*22AH sealed lead acid
Color Coded Voltmeter
Float charge
1x12V
Yes
12V
450A
1000A
1*17AH sealed lead acid
LED
Automatic with float cut
1 x 12v
No
8.5kg
www.disc.ie
7
Cable Avoidance & Cable Reels
EZiSYSTEM™ has been specifically
designed to reduce human error and to
increase site safety with its intelligent
and unique features.
COBRA RODDING SYSTEM
CABLE REELS
Continuous Pipe and Duct Rodding
Systems.
The ‘Medi Cobra’ rodding system gives
a compact and labour saving solution
whether installing cables in ducts,
threading draw ropes through pipes
or surveying drains with CCTV
cameras.
• Rugged - Robust, zinc plated steel
frames
• Reliable - Highest quality, fibreglass
rod radially reinforced construction
• Cost-effective - Faster and more
economic than screw together drain
rods
EZiSYSTEM™ comprises of:
• EZiCAT™ i500/i550 Service Locators
• EZiTRACE™ Signal Transmitter
• EZiROD™ Service Tracer
• Dual Frequency Sonde
• Signal Clamp • Property Connection Set
EZiSYSTEM™ makes locating underground
cables and pipes a simple and speedy task,
increasing your onsite safety and ultimately
saving time and money.
ROD: Highest quality 9mm
coated reinforced fibreglass rod
FITTINGS: Brass end fittings
with smooth profile aluminium
guiding tip
FRAME: Rugged steel construction,
Zinc plated
Rod Thickness
6.7mm
6.7mm
6.7mm
9mm
9mm
9mm
9mm
9mm
11mm
EZiCAT i500
Rugged cable avoidance tool, designed to locate
and trace buried conductive services which
radiate electromagnetic signals.
EZiCAT i550
DIMENSIONS: 920mm high x 820mm
width x 300mm depth
SAFETY BRAKE: Integral fully
adjustable brake system fitted as
standard
WHEELS: Frame also available with
optional wheel kits at extra cost.
Other sizes available on request.
All the same functionality as the EZiCAT i500, with
the added benefit of service depth estimation,
when used in conjunction with the EZiTRACE
signal generator or Sonde in 8/33 kHz mode.
SIGNAL CLAMP
Provides a direct
connection from the
EZiTRACE to metallic
pipes, cables, etc.
(max. 100 mm
outside diameter)
8
/ Length
60M
80M
100M
60M
80M
100M
120M
150M
250M
www.disc.ie
EZIROD
SERVICE TRACER
Allows tracing of plastic
ducts, clay drains and
other non-conductive
conduits. Available in
three lengths
(30m/50m/80m)
Cable Avoidance & Cable Reels
WASP BOX LOCATOR / METAL DETECTOR
The WASP box locator / metal
detectorhas become an industry
standard metal detector within the
water industry. This metal detector is
simple to use with just two controls,
Fine and Coarse tuning, and provides
good depth penetration, rugged
reliability and is economically priced at
half the cost of anything comparable.
Along with its distinctive and highly
visible yellow and black colouring, these
features are why it has established itself
so successfully within the industry.
ELCOMETER P500 VALVE
BOX LOCATOR / METAL DETECTOR
EZITRACE SIGNAL
GENERATOR
The Elcometer P500 Valve Box Locator / metal
detector has been designed to locate the
presence of sub surface pipeline valve boxes.
DUAL FREQUENCY Sonde38mm
diameter signal transmitter used to
trace drains, sewers and other nonconductive services. Can be attached to
drain rods, boring tools, inspection
cameras, etc.
Improves buried service detection
by applying a traceable signal to
conductive services where no signal
is present. (incl. batteries,
connection cable set, earth spike &
user manual)
EZISYSTEM CARRY BAG
Bag Carries the main components of the System
EZiSYSTEM (EZiCAT and EZiTRACE) & accessories.
Constructed from rugged fabrics and complete with
shoulder strap.
www.disc.ie
9
Cleaning Equipment
PREDATOR FLOOR SCRUBBER
Multi Function Cleaning Machine
Motor Power
Deck Size
Brush
Speed
Cleaning Range
Weight
Applications
SABRINA
CARPET
CLEANING
MACHINE
The Sabrina is
specially designed to
clean small areas of
carpet and hard
floors. Even though it
is compact, the
Sabrina is suitable
for professional use.
Cable Length
Cleaning Width
Construction Material
Polythene
Hose Assembly Length
Machine Size
Machine Weight
Number of Jets
Recovery Tank Capacity
Solution Tank Capacity
10 metres
2700mm
Expanded
2.5 metres
300 x 420 x 530
12 Kilograms
one (02)
14 Litres
14 Litres
INDUSTRIAL WET / DRY VACUUM CLEANER
Full accessories included
• Acidproof and anti alkalis tank
• Collision resistant plastic semi transparent tank
• Silent motor with powerfull suction suitable for long running times
• Tank equiped with water drain
• Ideal for large workshops , factories, stores and other types of cleaning applications.
Model
Power Input (W)
Voltage (V)
Drum Capacity (L)
Size (Cm)
Air Flow (L/S)
Fitting Size (Mm)
Motor Type
Approvals
10
Discvac 2000
2000 Watt
110 Or 220
90
95 X 44
106
40
Ametech
Ce / Rohs
www.disc.ie
1200w
450mm
450mm
175rpm
24m
49kg
Cleaning Equipment
• Full accessories included
• Acidproof and anti alkalis tank
• Collision resistant plastic tank
• Silent motor with powerfull suction suitable for long running times
• Ideal for resteraunts, hotels, small factories and other types of
cleaning applications.
LIGHT INDUSTRIAL WET DRY 15 LITRE
Model
Power Input (W)
Voltage (V)
Drum Capacity (L)
Size (Cm)
Air Flow (L/S)
Fitting Size (Mm)
Motor Type
Approvals
Discvac 2000
1000 Watt
220
15
56x34.5
48
36
Ametech
Ce / Rohs
BF533 FLOOR DRYER
Power:
0.75HP
Voltage:
110V / 60Hz, 220V / 50Hz
Weight:
16kg
Cast polyethylene tank and handle
CARPET CLEANING SOLUTION
1 LITRE BOTTLE
www.disc.ie
11
Compaction
MASALTA
Masalta’s plate compactor, with an
operating weight from 50kgs to
355kgs, petrol/diesel powered, easy
to service design and mechanical
control system, may be the most
economical compactor in the
market.
MS50
PLATE COMPACTOR
MH160
REVERSIBLE PLATE COMPACTOR
MS90
PLATE COMPACTOR
12
MS60
PLATE COMPACTOR
MR68H
TAPPING RAMMER
MODEL
MS50
MS60
MS90
MH160
MR68H
Engine Type
Power kw (hp)
Operation Mass kg (lb)
Frequency vpm
Centrifugal Force kN
Compaction Depth cm (in)
Travel Speed cm/s (in/s)
Efficiency m2/hr (ft2/hr)
Plate Size cm (in)
Dinemsion cm (in)
Petrol Engine
1.8 (2.5)
54 (119)
5900
8.2
20 (8)
37 (15)
350 (3733)
43x31 (17x12)
90x31x88 (35x12x34)
Petrol, Honda GX160
4.0 (5.5)
62 (136)
5600
10.5
20 (8)
40 (16)
450 (4,800)
50x36 (20x14)
108x40x80 (43x16x31)
Petrol, Honda GX160
4.0 (5.5)
83 (183)
5500
13.0
30 (12)
40 (16)
660 (7100)
53x50 (21x20)
110x83x50 (43x33x20)
Diesel, Lombardini LD350
5.5 (7.5)
156 (344)
5400
30
Petrol, Honda GX100
3.0 (4.0)
75 (165)
50x69 (20x27)
136x55x88 (54x22x35)
33x28 (13x11)
43x76x10 (17x31x40)
www.disc.ie
Compaction
MBW
UVL PLATE COMPACTORS
The MBW ‘Ultra Low Vibration System’
reduces hand-arm vibration levels
without an excessive increase in
machine weight.
Manual handling and the risk of spinal
or muscular injury is as important to
MBW as reducing the risk of HAVS.
Model
Weight
Plate size
W x L (mm)
Centrifugal Force Travel Speed
(kgs)
(m/min)
Engine
GP 1200S
GP 1400S
GP 1600S
AP/GP 2000S
GP 2500S
49
63
66
76
70
305 x 535
355 x 535
405 x 535
510x560
455 x 535
970
1,150
1,250
1,100
1,400
Honda GX100
Honda GX120
Honda GX120
Honda GX160
Honda GX160
www.disc.ie
21
24
26
27.4
26
13
Compaction
WEBER
Optimum compaction, trouble-free
ope ration, supreme ease of maintenance
and reliable quality ensuring long operating
hours: CR soil compactors meet all these
requirements, with exemplary results.
Vibratory tampers from Weber MT:
quality that will get you ahead
Excellent compaction results, exemplary
operating comfort and rugged design are the
essential requirements vibratory tampers
must meet. Customers looking to purchase a
premium quality tamper need to look no
further than the powerful machines being
offered by Weber MT.
SRV620
TAPPING RAMMER
CR2 / CR3
REVERSIBLE PLATE COMPACTOR
14
CF2R
PLATE COMPACTOR
Type
CR2
CR3
SRV620
Operating weight to CECE kg (lbs)
Centrifugal force kN (lbs)
Frequency Hz (r.p.m.)
Operating width mm (in.)
Engine manufacturer
Engine type
Engine output
Working speed m/min. (ft/min.)
146 (322)
25 (5620)
100 (6000)
450 (18)
Lombardini 15LD 225
Diesel
3.5 (4.8)
0-15 (0-49)
206 (454)
34 (7650)
80 (4800)
500 (20)
Hatz 1 B 20
Diesel
3.4 (4.6)
0-20 (0-66)
66 (145)
15 (3,375)
95 (5,700)
450 (17.7)
Honda GX 100
4-stroke gasoline
2.1 (2.9)
26 (85)
www.disc.ie
83 (183)
15 (3,375)
95 (5,700)
450 (17.7)
Robin EX 17
4-stroke, gasoline
4.2 (5.7)
26 (85)
Concrete Cutting Saws
Perla, Ambar & Deluxe
The Perla & Ambar machines fulfill the four
basic cutting functions carried out by
professional stonemasons at building sites.
Straight cutting at 90º angle. Mitre Cutting at
45º angle. Round drill holes. Polygonal inner
boxes. With the Deluxe, The depth of cutting
can be varied to enable the cutting of thick
materials. Blade capacity of 300mm or 350mm.
The cutting depth is 75mm with a 300mm
blade and 110mm with a 350mm blade.
PERLA
TILE SAW
AMBAR
TILE SAW
DELUXE
BRICK SAW
Specs
Ambar 200
Perla 200
Perla 250
Deluxe
Motor Phase (S/T)
Motor Power ((Kw)
Max. Blade Diameter (mm)
Blade Bore Diameter (mm)
Max. Cutting Depth (mm)
Max. Cutting Length (mm)
Net Weight (Kg)
Dimensions
Single Phase
0.8
200
22.2
35
600
32
900x450x320
Single Phase
0.55
200
22.2
40
640
26
930x460x417
Single Phase
1.1
250
22.2
63
620
40
930x560x467
Single Phase /
2.2
350
25.4
75
680
77
1194x670x1460
Cobra 45 Cobra 50
Heavy duty capacity saw, yet very versatile and manoeuvrable.
Supplied with a polypropylene 40 L. water tank.
Cutting gauge for accurate cutting depth.
The ergonomic design allows the handle to be used on medium and large
sites whilst still guaranteeing top performance.
Three Phase
3
300
25.4
100
700
77
Venus 125
Designed to cut and mitre any kind of construction material,
specially those with oversized dimensions, in a fast, clean and
precise way. It is suitable not only building sites but also in
masonry workshops cutting marble and granite, etc.
COBRA 50
FLOOR SAW
COBRA 45
FLOOR SAW
Specs
Cobra 45
Cobra 50
Type
Engine Model
Motor Power ((Kw)
Fuel
Engine Starter
Blade Bore Size (mm)
Water Tank Capacity (L)
Net Weight (Kg)
Dimensions
G13H
Honda Gx390
9.6
Petrol
Recoil
500
25.4
120
40
108
1580x620x930
G13H
Honda Gx390
9.6
Petrol
Recoil
500
25.4
155
50
176
1710x620x950
www.disc.ie
VENUS 125
LARGE TABLE SAW.
Specs
Venus 125
Motor Phase (S/T)
Motor Power ((Kw)
Blade Bore Size (mm)
Max. Cutting Length (mm)
Net Weight (Kg)
Dimensions
Single Phase / Three Phase
2.2 / 3
350
25.4
100 / 75
1,250
125
1850x780x1330
15
Concrete Cutting Saws
STIHL Cut-off & Concrete Saws
Robust machines for demanding tasks: STIHL cut-off saws are specially designed for hard work on construction sites. the
equipment has particularly long maintenance and servicing intervals and uncompromising reliability. Operating costs are
therefore kept low and this plays an important part in increasing profitability. Other features include the outstanding cutting
performance, standard long life filter system, sophisticated operating convenience and almost legendary easy servicing by STIHL.
With the special STIHL accessories, such as the FW 20 cart, water tank or depth limiter, the powerful STIHL cut-off saws are
optimally equipped for every job.
TS 410
CONCRETE CUTTING SAW
TS 420
Compact and robust, the STIHL TS 410 & TS 420 has a long-life filter system with
cyclone pre-separation makes on site maintenance unnecessary. Extremely low
vibration levels (3.9m/s²). High performance engine with stratified charge system.
Compact design and optimised balance for excellent cutting and guide
characteristics. For use with 300mm cutting wheel. ElastoStart, primer pump and
decompression valve. Bayonet filler cap for tool free opening. Can be hand held or
used with the FW 20 cart.
FW 20 CART
WITH ATTACHMENT KIT
Very powerful 5.0 kW engine with 400
mm cutting wheel. Includes a long life air
filter system with cyclone air routing.
Ergonomic design with optimised
handling positions. ElastoStart plus,
compensator and decompression valve.
Water attachment and composite cutting
wheel come as standard. Can be
operated by hand or mounted on a FW
20 cart.
PRESSURISED WATER
CONTAINER
The STIHL FW 20 cart turns all hand-operated STIHL cut-off saws into easily
manoeuvrable cutting machines. Convenient depth adjustment allowing the
cut-off saw to be easily mounted on the cart and cut height adjusted by
means of the upper handle. Comes with 'Attachment kit with Quick
Mounting System'. For the TS 400, TS 410, TS 420, TS 480i and TS 500i.
16
TS 800
www.disc.ie
This 10 litre capacity pressurised water
container provides a mobile water
supply and ensures clean, wet cutting
without dust build up. No need for an
external water connection. With
recessed grip and stable base.
Concrete Finishing
MASALTA MT 36
POWER TROWEL
ENAR AVMU HAND HELD ELECTRIC POKER
MASALTA MCD
FINISHING SCREED
VGH5D
POKER DRIVE UNIT
MBW F36/4
POWER TROWEL
ENAR SPYDER
HAND HELD HIGH FREQUENCY
POKER SHAFT
ENAR HURACAN
FINISHING SCREED
ENAR AFGH
HIGH FREQUEMCY PETROL
POKER DRIVE UNIT
MAKE
MODEL
DESCRIPTION
MAKE
MODEL
DESCRIPTION
Masalta
Masalta
MBW
MT24
MT36
F36/4
Trowel
Trowel
Trowel
Kraft
Kraft
Kraft
CC832
CC878
CC802
3’ fresno bull float
Multi trac fresno
4’ magnesium bull float
Masalta
Enar
Enar
MCD
Huracan
Tornado
Finishing Screed
Finishing Screed
Finishing screed
Enar
Enar
Enar
Enar
Enar
Enar
AVMU
Spyder
Pendulum type
AFGH
AFDY
MB51
Hand held electric poker
Hand held High Frequency
(Metrix or Dynapac fittings available)
High Frequency Petrol Poker drive unit
High Frequency Diesel Poker drive unit
High frequency poker vibrator
Kraft
Kraft
Kraft
Kraft
Kraft
Predator
Predator
Predator
Predator
CC750
BIG D 4’ bull float
CC296
Knucklehead 2
CC289SB
1 ¾” aluminium pole 6’
CC905AF
concrete placer
CC113
concrete rake
CPS0023 24” power float pan
CPS0102A 36” power float pan
CPS0100C gold quality blades t/s 24” power floats
CPS0100B gold quality blades t/s 36” power floats
(See page 18 for images)
www.disc.ie
17
Concrete Finishing
18 ROLLER TAMP
48 MAG FLOAT
BIG D BLUE
CONCRETE RAKE CC113
CONCRETE SPREADER RAKE
CC904AF
FRESNO COMP
GOLD PFLOAT BLADES
KNUCKLE
PFLOAT PAN
CC187 36" ALL PURPOSE
HORSEHAIR FLOOR & FINISH
BROOM
MULTI TRAC FRESNO CC874
18
36 ROLLER TAMP
www.disc.ie
Concrete Finishing
MASALTA MBS42 BLOCK
SPLITTER
Blade Length (cm)
Max Cutting Height (cm)
Drive
MASALTA MC8 FLOOR CONCRETE
SCABBLER
32
14
Manual
Motor
Power
Working Width
Operation Mass
MT24-4
POWER TROWEL
Engine
cycle, single cylinder
Engine Type
GX160
Power kw (hp)
Operation Mass kg
Electric
2.2kw
200mm
42kg
HALF BAG 2.5HP PETROL MIXER
Air-cooled, 4
Petrol, Honda
4.0 (5.5)
63
www.disc.ie
Cement / Mortar Mixer
LONCIN LC152F
141 Litre Capacity
125kg Batch Output
Complete with Stand
Weight 74kg
19
Dehumidifiers
We offer a variety of dehumidifiers and air movers to remove water and assist with drying areas after water damage. Following a
flood, whether it is in your basement or office, it’s vitally important to restore the damaged area to good order as soon as possible to
protect your health from microorganisms, mold and bacteria that may grow and ultimately prevent further damage.
Industrial
EBAC BD70
EBAC RM65
EBAC KOMPACT
EBAC BD150
Domestic
EBAC CD100
KHOL 16L
COMPACT DEHUMIDIFIER
Type :
Capacity :
Controls :
Filter :
Humidistat :
Extraction :
EBAC CD425
20
Indoor Dehumidifier
6.5 Litres
Mechanical
Washable
Yes
16 Litres/Day
Specs
BD70
KOMPACT
BD150
RM65
CD100
CD425
Height (mm)
Width (mm)
Depth (mm)
Weight(kgs)
Voltage
Phase
Frequency(Hz)
Power(kW)
Current(A)
Airflow(m3/hr)
Noise Level(dba)
Effective Volume(m3)
Typical Extraction(l/d)
Min Operating Temp (°C)
Max OperatingTemp (°C)
508
305
305
25
110/230
1
50
0.46
4/2
170
47
100
12
3
35
615
508
488
40
110/230
1
50
0.75
5/2.5
152
47
237
20
3
35
915
610
692
80
110/230
1
50
1.5
16/8
510
73
300
30
3
35
810
510
485
37
230
1
50
1.0
7
382
57
237
38
3
35
400
1130
500
75
230
1
50
1.5
8
510
57
300
30
3
35
1190
1100
460
160
415
3
50
6
16
3000
69
1350
150
3
35
www.disc.ie
Accessories
DIAMOND BLADES & DIAMOND CORE BITS
DISCUT PROFESSIONAL DIAMOND BLADES
“DISCUT PREMIUM
DIAMOND BLADE
DISCUT TURBO
DIAMOND BLADE
AVAILABLE IN CONCRETE OR
ASPHALT
DISCUT SPECIALIST
TILE CUTTING BLADE
DISCUT SPECIALIST
PORCELAIN
CUTTING BLADE
DSC001
DSC001A
DSC002
DSC003
DSC004
4.5"
5"
9"
12"
14"
DSC004A
DSC004B
DSC005
DSC003B
DSC004A1
DSC004B1
DSC005A
DSC0070
DSC0071
DSC0072
DSC0061
DSC006A
DSC007
DSC084
DSC085
DSC086
DSC0010
DSC0011
DSC0012
14"
16"
18"
12”
14"
16"
18"
7"
9"
12"
6"
7"
9"
9"
12"
14"
4.5"
5"
7"
PREMIUM CONCRETE
PREMIUM CONCRETE
PREMIUM CONCRETE
PREMIUM CONCRETE
PREMIUM CONCRETE 20MM BORE
(T/S CONSAW)
PREMIUM CONCRETE 1" BORE
PREMIUM ASPHALT 20MM BORE
PREMIUM ASPHALT 1" BORE
PREMIUM ASPHALT
PREMIUM ASPHALT
TURBO DIAMOND BLADE
TURBO DIAMOND BLADE
TURBO DIAMOND BLADE
FAST CUT CONTINUOUS RIM
PREMIUM GRANITE DIAMOND BLADE
PREMIUM CUPWHEEL
PREMIUM CUPWHEEL
PREMIUM CUPWHEEL
Check out our
full range of
products on our
website
www.disc.ie
PROFESSIONAL DIAMOND BLADE
(AVAILABLE FROM 12” UP TO 20”)
DIAMOND CORE BITS
DIAMOND CORE BITS
Wet Core Drills for reinforced concrete
have been developed through continued
in situ testing with core drilling
specialists. These premium quality
diamond core drills use 'Roof Top'
segments designed to help initiate the
first cut before the segments have fully
'opened up'
Wet Core Drill D25mm x L450mm EL 1/2" (M) Green
Wet Core Drill D28mm x 450mm EL 1/2" (M) Green
Wetr Core Drill D42mm x L450mm EL 1/2" (M) Green
Wet Core Drill D52mm x L450mm EL 1 1/4 (F) Green
Wet Core Drill D78mmx L450mm El 1 1/4 (F) Green
Wet Core Drill D117mm x L450mm EL 1 1/4 )F) Green
www.disc.ie
21
Accessories
SDS DRILL BITS
SDS MAX CONCRETE DRILL BITS
Diameter
D mm
12
12
12
12
14
14
14
14
15
15
16
16
16
16
16
17
17
18
18
18
18
18
19
19
20
20
20
20
20
22
22
22
22
22
Working length
L1 mm
200
400
600
800
200
400
600
800
200
400
200
400
600
800
1200
200
400
200
400
600
800
1200
200
400
200
400
600
800
1200
200
400
600
800
1200
Overall Length
L2mm
340
540
740
940
340
540
740
940
340
450
340
540
740
940
1340
340
540
340
540
740
940
1340
320
520
320
520
720
920
1320
320
520
720
920
1320
Diameter
D mm
24
25
25
25
25
25
26
26
28
28
28
28
28
30
30
32
32
32
32
32
35
35
35
35
38
38
40
40
40
40
45
52
SDS PLUS CONCRETE DRILL BITS
22
Diameter
D mm
Working length Overall Length
L1 mm
L2mm
5
5
5
5.5
5.5
6
6
6
6
6.5
6.5
6.5
6.5
7
7
7
8
8
8
8
50
100
150
50
100
50
100
150
200
50
100
200
250
50
100
150
50
100
150
200
110
160
210
110
160
115
165
215
265
115
165
265
315
115
165
215
115
165
215
265
Diameter
D mm
250
10
10
10
10
12
12
5
5
6
6
8
8
10
10
10
12
12
Working length
L1 mm
315
100
150
200
250
100
150
50
100
50
100
100
150
100
150
200
100
150
Overall Length
L2mm8
165
215
265
315
165
215
110
160
115
165
165
215
165
215
265
165
215
www.disc.ie
Working length
L1 mm
200
400
200
400
600
800
1200
200
400
200
400
600
800
1200
200
400
200
400
600
800
1200
400
600
800
1200
400
600
400
600
800
1200
400
400
Overall Length
L2mm24
320
520
320
520
720
920
1320
320
520
320
520
720
920
1320
320
520
320
520
720
920
1320
520
720
920
1320
520
720
520
720
920
1320
520
520
Accessories
SDS DRILL BITS, BREAKTHROUGH BITS & CORE BITS
SDS MAX TUNGSTEN CORE BITS
SDS MAX BREAKTHROUGH BITS
Diameter
D mm
45
45
55
55
65
65
80
80
Working length
L1 mm
450
850
450
850
450
850
450
850
Diameter
D mm
45
50
55
68
82
90
100
125
150
Overall Length
L2mm
590
990
590
990
590
990
590
990
Working length
L1 mm
70
70
70
70
70
70
70
70
70
ADAPTERS, EXTENSIONS, SHANKS
Overall Length Adapter for
Mount for
mm
Machine Side
Machine Side
200
SDS-max
460
SDS-max
200
Large Spline
460
Large Spline
Overall Length
L2mm
80
80
80
80
80
80
80
80
80
PILOT DRILL BIT
Diameter
Overall Length
D mm
mm
11
135
11.5
136
5
25
TUNGSTEN TIPPED BLADES
SDS-MAX CHISELS
CODE
TRADE QUALITY TCT BLADES
DSC0050
DSC0051
DSC052
DSC0521
DSC054
DSC053
DSC055
DSC056
DSC052A
DSC051A
DSC051B
7 1/4" 24 TOOTH TRADE QUALITY
10" 60 TOOTH TRADE CHOP SAW BLADE
10" 30 TOOTH TRADE QUALITY
12" 30 TOOTH TRADE QUALITY
12" 60 TOOTH TRADE CHOP SAW BLADE
9" 30 (230MM) TOOTH TRADE QUALITY BLADE (HILTI TYPE)
216MM X 48 TOOTH TRADE CHOPSAW BLADE
216MM X 60 TOOTH TRADE CHOPSAW BLADE
www.disc.ie
18X360X25MM SMALL FLAT
18X360MM POINTED
18X300X50MM BIG FLAT
18X300X75MM BIG FLAT
18X300X25MM GOUGE CHISELS
KANGO 900 / RYOBI CH485 /
HITACHI H55SA CHISELS
21x380x25mm small flat
21x380 pointed
21x300x50mm big flat
21x300x75mm big flat
21x300x25mm gouge
23
Accessories
HANDLING EQUIPMENT
Features:
HAND PALLET TRUCK
2500KG, 550X1000 MM,
WITH DOUBLE FORK ROLLERS
Adjustable pump cap
Adjustable straight tappet
Model
Capacity
Lowered fork height
Steering wheel
Fork wheel single
Fork wheel standem
Max. lift height
Total height
Overall length
Fork length
Width overall forks
Ground clearance,centre of wheelbase
Aisle width for pallets 1000x1200 crossways
Aisle width for pallets 800x1200 lengthways
Turning radius
Service weight
24
• Most standard and popular model with capacity 2500kgs.
• Complete pump design with reliable leak-proof pump eliminating
maintenance and extending the service time.
• 210 steering arc and small turning radius.
• Fork lowering speed is controllable, operated by hand control and
foot pedal.
• Ergonomic rubber wrapped handle, which is comfortable and
convenient to operate.
• Entry/Exit Roller, more freely travel.
• Equipped with over-load valve with long service time.
• Ergonomic Large Rubber handle with three control lever.
Option: Fully rubber wrapped
handle
2.5 TON
Q(kg)
h13(mm)
mm
mm
mm
h3(mm)
h14(mm)
l1(mm)
l(mm)
b5(mm)
m2(mm)
Ast(mm)
Ast(mm)
Wa(mm)
kg
2500/3000
85
φ200
φ80x93
φ80x70
200
1224
1400
1000
520
32
1733
1883
1216
63-75
www.disc.ie
Entry roller for easy operation
Innovative wheel frame
Floor Finishing Equipment
SCORPION RENT DRUM SANDER
Model
Power
Speed
Weight
Drum
Abrasive
Expansion
1500 W
3.000 rpm
45 kg
45 kg
200 x Ø 151 mm
200 x Ø 480 mm
Classic
1500 W 1
2.500 rpm
45 kg
200 x Ø 151 mm
200 x Ø 550 mm
EasyFit
500 W
2.500 rpm
200 x Ø 147 mm
200 x Ø 470 mm
NOVA-2 6” EDGING SANDER
Weight
Speed
Backing Disc
Abrasive
7,9 kg
3.300 rpm
Ø 150 mm
Ø 150 mm
TAURUS DRUM SANDER
Weigth
Speed
85 kg
1.850 / 2.050 rpm (50Hz)
2.000 / 2.200 rpm (60Hz)
Abrasive 203 x Ø 750 mm
Drum
200 x Ø 185 mm
VEGA 7” EDGING SANDER
Weight
Speed
Backing Disc
Abrasive
14 kg
3.000 rpm (50Hz)
3.200 rpm (60Hz)
Ø 175 mm
Ø 178 mm
PLANFIX PRO55
ORBITAL SANDER
Weight
Speed
Sanding Pad
Abrasive
55 (46+9) kg
1.400 rpm
300 x 460 mm
300 x 460 mm
SIRIO DRUM SANDER
Weigth
Speed
Drum
85 kg
1.850 / 2.050 rpm (50Hz)
2.000 / 2.200 rpm (60Hz)
200 x Ø 185 mm
www.disc.ie
25
Floor Finishing Equipment
SANDPAPER & NAILER
NOTCHED SHEETS
12” X 18” SHEETS
BACK PADS
7 INCH SANDING DISCS
PORTA NAILER
26
8” WIDE X 50M ROLL
PORTA NAILS
www.disc.ie
RYOBI RBC30SESA
BRUSH CUTTER
Engine capacity:
Output Power:
Tank capacity:
Cutting path width:
Line diameter:
Blade diameter:
Weight:
Dimensions -
Weight -
30cc.
0.75 or 1hp.
0.415 litre.
46cm.
2.4 or 2.7mm.
200mm.
7.3kg.
(H) 245mm x (W)
260mm x (D)
940mm
8.620kg
RBV26 BLOWER VACUUM
Engine capacity Airflow Output power Mulching ratio Suction capacity Collection bag capacity Weight -
26cc
320km/h
0.9hp
12:1
12cbm/min
40L
4.5kg
RBC40SB
INDUSTRIAL BRUSH CUTTER
Engine
40cc 2-stroke
Power output
1.6hp
Handle‘
Bike’
Weight
7.7kg
Cutting-path (with line-head) 415mm
Line diameter
2.7mm
Metal blade
RCS4040CA CHAINSAW
Engine displacement:
Chain bar length:
Chain speed:
Container capacity:
Carbon offset:
Total Shipping Weight:
40 cc
40 cm
12.5 m/s
0.2 L
7.8 kgCO2e
6kg
www.disc.ie
RBC52SB
INDUSTRIAL BRUSH CUTTER
Engine capacity:
Output power
Tank capacity:
Cutting path width:
Line diameter:
Blade diameter:
Weight:
52cc
1.9HP
1.2 litres
420mm
2.7mm
260mm
7.7kg
RHT2660DA HEDGE TRIMMER
Engine capacity:
Power:
Tank capacity:
Blade length:
Blade Type
Cutting capacity:
Weight:
26cc
0.67 kW 0.9hp
0.3 litre
60cm
Dual-action
28mm
5.3kg
27
CLASSEN CA18H
PROFESSIONAL AERATOR
Dimenions
48.5" H (38" aerating) x
27.75" W x 53" L
Dimenions
(Handle Folded)
Dry Weight
Aerating Width
Coverage
Tines
Weights
Engine
28.5" H x 27.75" W x 40" L
278 lbs.
17.5" and fits through
30" gate
23,000 sq. ft. per hour
24 tines with coring
depth up to 3" and hole
pattern of 4.4" x 7"
Two removable 36 lb.
weights
Honda® GX120 or Briggs
& Stratton® Intek
Dimensions
Dimensions
(handles folded)
Dry Weight
Engine
40" H x 27" W x 44" L 40"
H x 27" W x 44" L
29.5" H x 27" W x 30.5" L
29.5" H x 27" W x 30.5" L
135 lbs.
135 lbs.
Honda® GX160
Briggs & Stratton® Intek
Dimensions
(handle folded)
Dry Weight
Engine
99cm H x 80cm W x
130cm L
86cm H x 80cm W x
94cm L
108 kg
Honda® GX160
Rated power
Rated speed
Displacement
Gas oil capacity
Oil capacity
Fuel consumption
Tiller
Cutting depth
28
Dimensions
Cutting Dinemsions
Drive Wheels
Engine
Weight (kg)
89cm H x 57cm W
x 147cm L
45cm W x 6.5cm D
4
Honda® GX160
144
LONCIN 75CM
TILLER
CLASSEN TSS20H
TURF SEEDER
Dimensions
CLASSEN SCHV18/5.5
SOD CUTTER
CLASSEN TR20H
TURF RAKE / LAWN COMBER
3.4 kw
3600 r/min
196CC
3.6L
0.6L
≤30 kg /hm2
Cutting width
75 cm
≥10 cm
www.disc.ie
Working capacity
Efficiency per hour
Transmission
Connecting
Rated blade speed
Blade Type
Dimension
Net weight
0.1～0.3 m/s
≥400m2/h
Chain
Straight
120r/min
Dryland blade
1500×850×1000 mm
62.5kg
General Purpose Engines
LONCIN G200F/G200FD
LONCIN G270F/G270FD
• Overhead valve (OHV) design, lower operation temperature, powerful
drive and reliability and durability, and it saves more oil.
• Cast iron casing does not only effectively improve lubrication, but
also makes engine more wear-resistant and prolongs engine life.
• Automatic alarm and stop at low oil level, which prevents the engine
to work at low oil level and gives more protection to engine.
• Metal cam and forged crankshaft makes engine more reliable and
durable.
durable.
Model
G200F/G200FD
G270F/G270FD
Engine type
Displacement
Bore×Stroke
Net power
Net torque
Idle speed
Compression ratio
PTO shaft rotation
Noise（≤7m）
Ignition system
Starting system
Carburetor
Lubrication system
Governor system
Air cleaner
Oil capacity
Fuel tank capacity
Net weight
Dimension
Single cylinder,4stroke, forced cooling ,OHV
196cc
68mm×54mm（2.7″×2.1）
4.1KW/3600rpm
12.4N.m（9.1 lbf.ft）/2500rpm
1400±150r/min
8.5∶1
Anti-clockwise(from PTO side)
≤70dB(A)
Transistorised magneto ignition
Recoil start/Electric-start
Butterfly
Splash
Centrifugal mass type
Semi-dry, dual element
0.6L（0.16gal）
3.6L（0.95gal）
16Kg（35.3lb）
312×376×335（12.3×14.8×13.2）
270cc
77mm×58mm（3.0″×2.3″）
6KW/3600rpm
17.7N.m（13.1bf.ft）/2500rpm
1450±150r/min
8.2∶1
≤70dB(A)
Transistorised magneto ignition
Butterfly
Splash
Semi-dry,dual element
0.95L（0.25gal）
6L（1.6gal
25Kg（55lb）
380×430×410（15″×16.9″×16.1）
www.disc.ie
29
LONCIN G420F/G420FD
LONCIN G390F/G390FD
durable.
30
durable.
Model
G390F/G390FD
G420F/G420FD
Engine type
Displacement
Bore×Stroke
Net power
Net torque
Idle speed
Compression ratio
PTO shaft rotation
Noise（≤7m）
Ignition system
Starting system
Carburetor
Lubrication system
Governor system
Air cleaner
Oil capacity
Fuel tank capacity
Net weight
Dimension
Single cylinder,4stroke, forced cooling , OHV
389cc
88mm×64mm（3.5″×2.5）
8.2KW/3600rpm
25.1N.m（18.5lbf.ft）/2500rpm
1450±150r/min
8.1 1
≤70dB(A)
Transistorized magneto ignition
Butterfly
Splash
1.1L（0.29gal）
6.5L（1.7gal）
33Kg（72.8lblb）
405×450×443（16″×17.7″×17.4）
420cc
90mm×66mm（3.54″×2.6）
9KW/3600rpm
26.5N.m（19.5 lbf.ft）/2500rpm
1450±150r/min
8.3 1
≤70dB(A)
Butterfly
Splash
Semi-dry,dual element
1.1L（0.29gal）
6.5L（1.7gal）
31Kg（68lb）
405×450×443（15.9″×17.7″×17.4）
www.disc.ie
LONCIN LC178FD DIESEL
LONCIN LC152F PETROL
LONCIN LC186FD DIESEL
LC152F
LC178FD
LC186FD
Engine type
Single cylinder,4stroke, forced cooling , sv
Displacement
Bore×Stroke
Net power
Net torque
Idle speed
Compression ratio
PTO shaft rotation
Noise（≤7m）
Ignition system
Starting system
Carburetor
Lubrication system
Governor system
Air cleaner
Oil capacity
Fuel tank capacity
Net weight
Dimension
97cc
52mm×46mm（2.0×1.8)
1.2KW/3600rpm
3.2 N.m（2.4lbf. ft/3000rpm
1700±150r/min
5.6 1
Anti-clockwise(from pto side)
≤70dB(A)
Recoil start
Butterfly
Splash
0.45L（0.12gal）
1.4L（0.37gal）
9Kg（19.8lb）
280×270×345（11×10.6×15.6）
Single cylinder,vertical cylinder,
4stroke, forced cooling ,direct injection
349cc
78mm×73mm(3.1”×2.9”)
4.9KW/3600rpm (7h)
15.5 N.m(11lbf. ft)/2400rpm
1300±100r/min
21:1
Single cylinder,vertical cylinder,
4stroke, forced cooling ,direct injection
441cc
86mm×76mm(3.4″×3″)
6.8KW/3600rpm 10h)
22 N.m(16.2lbf. ft)/2400rpm
1300±100r/min
21:1
Recoil start/Electic-start
Recoil start/Electic-start
Forced lubriacation
Paper filter element foam element
1.1L(0.3gal)
3.5L(1.2gal)
43Kg(94.8lb)
400×430×450(15.74×16.93×17.72)
Forced lubriacation
Paper filter element foam element
1.6L(0.423gal)
5.5L(1.19gal)
50Kg(110.2lb)
420×450×490(16.54×17.72×19.3)
www.disc.ie
31
HONDA GX390
HONDA GX200
Engine Type
Cylinder Sleeve Type
Bore x Stroke
Displacement
Compression
Net Power
Cont. rated power
Max net torque
Ignition System
Starting System
Fuel tank Capacity
Fuel cons. at rated power
Engine Oil Capacity
Dimensions (L x W x H)
Dry Weight
32
GX200
GX390
Air cooled 4 stroke OHV petrol engine,
25° inclined cylinder, horizontal shaft
Cast Iron Sleeve
68 x 54mm
196 cm3
8.5 : 1
4.1 Kw (5.5 HP) / 3600 rpm)
3.3 kW (4.4 HP) / 3000 rpm
3.7 kW (5.0 HP) / 3600 rpm
12.4 Nm / 1.26 Kgm / 2500 rpm
Transistorised
Recoil (Electric Start Optional)
3.10 l
1.7 L/hr - 3600 rpm
0.6 l
321 x 376 x 346 mm
16 kg
Air cooled 4 stroke OHV petrol engine,
25° inclined cylinder, horizontal shaft
Cast Iron Sleeve
88 x 64mm
389 cm3
8.2 : 1
8.7 Kw (11.7 HP) / 3600 rpm)
6.4 kW (8.6 HP) / 3000 rpm
7.0 kW (9.4 HP) / 3600 rpm
26.5 Nm / 2.7 Kgm / 2500 rpm
CDI
Recoil (Electric Start Optional)
6.10 l
3.5 L/hr - 3600 rpm
1.1 l
406 x 460 x 448 mm
31.7 kg
www.disc.ie
Generators
LONCIN EN5000
PETROL GENERATOR
LONCIN EN3500
PETROL GENERATOR
LONCIN LC2000I
GENERATOR
Model
EN3500
EN5000
LC2000i
Engine model
Engine type
Power output
Bore×Stroke
Displacement
Compression ratio
Oil capacity
Fuel tank capacity
Fuel consumption
Continuing time
Rated frequency
Rated voltage
Voltage regulator system
Rated output
Max output
Power factor
Charging voltage
Starting system
Ignition system
Noise
Dimension
Net weight
G200F/G200FD
Single cylinder, 4stroke, forced cooling, OHV
4.1Kw/3600rpm
68mm×54mm
196cc
8.5:1
0.6L（0.16gal）
3.8L（1gal）
≤395g/Kw.h
2.6h
50 Hz
115V/230V
Automatic Voltage Regulation
2.0Kw
2.2Kw
1.0
/
Recoil start
≤75dB(A)
/
/
G340F/G340FD
Single cylinder, 4stroke, forced cooling ,OHV
7.1Kw/3600rpm
82mm×64mm
337cc
8.0:1
1.1L（0.29gal)
6.8L（1.8gal）
≤374g/Kw.h
2.7h
50 Hz
115V/230V
4.0Kw
4.5Kw
1.0
/
Recoil start
≤76dB(A)
/
/
LC148F
2.2Kw/5000rpm
48.6mm×43mm
79cc
9:1
0.35L（0.01gal）
4.2L（1.1gal）
≤395g/Kw.h
7h
50 Hz/60 Hz
230V
1.6Kw
1.8Kw
1.0
12V
Recoil start
C.D.I
≤61dB(A)
499×285×455
21Kg
www.disc.ie
33
Generators
LONCIN LC6500
PETROL GENERATOR
LONCIN EN6500
PETROL GENERATOR
Model
EN6500
Model
LC6500
Engine model
Engine type
G390F/G390FD
Single cylinder,4stroke,
forced cooling ,OHV
8.2Kw/3600rpm
88mm×64mm（3.5″×2.5″）
389cc
8.0∶1
1.1L（0.29gal）
6.8L（1.8gal）
≤374g/Kw.h
2.4h
50 Hz
115V/230V
5.0Kw
5.5Kw
1.0
/
/
Recoil start
≤76dB(A)
/
/
Engine
Loncin G390F, 4 Stroke,
OHV, air-cooled engine
389cc
5.0kw
5.5kw
5.5hp
3
2 x 16 amp 115V
1 x 32amp 230V
115V/230V
Electric and recoil
9hrs
25 Litre
76 dB (A)
68 x W: x 54 x H: 54.5cm
77 Kg (dry)
Power output
Bore×Stroke
Displacement
Compression ratio
Oil capacity
Fuel tank capacity
Fuel consumption
Continuing time
Rated frequency
Rated voltage
Voltage regulator system
Rated output
Max output
Power actor
Charging voltage
Charging current
Starting system
Ignition system
Noise
Dimension
Net weight
34
Engine displacement
Generator rated output
Max output
Net power
Output sockets
Output socket
Output socket
Rated voltage
Start
Run time
Fuel tank capacity
Sound
Dimensions
Weight
www.disc.ie
Generators
STEPHILL SE3400
PETROL GENERATOR
LONCIN LC8000
PETROL GENERATOR
Model
LC8000
Model
SE3400
Engine
Loncin G420F, 4 Stroke, OHV,
air-cooled engine
420cc
6.0kw
7.5kw
12HP
2 x 16 amp
1 x 32amp
Electric and recoil
8hrs
25 Litre
76 dB (A)
68 x W: x 54 x H: 54.cm
86 Kg (dry)
Output:
3.4kVA / 2.7KW
Sockets:
BS4343 industrial sockets
1 x 115V 16A sockets
HONDA GX200
6.5/1
Recoil Start
3.6 litres
3.0 hours @ 75% Load
71dB (A) @ 7 metres. 96LWA
L610x W420 x H410mm
36kg
Trolley Kit , Plastic Long Run Tank,
Single Voltage , AVR,
Gas Conversion
Engine displacement
Generator rated output
Max output
Net power
Output socket
Output socket
Start
Run time
Fuel tank capacity
Sound
Dimensions
Weight
LONCIN LC12000
PETROL GENERATOR
Engine:
HP/Cylinders:
Start:
Fuel Tank:
Run Time:
Noise Level:
Size:
Weight:
Options:
Model
LC12000
Engine model
Engine type
Bore×Stroke
Displacement
Oil capacity
Ignition system
Starting system
Volts DC/DC
Rated frequency
Rated voltage
Rated output
Max power
Fuel tank capacity
Dimension
Net weight
LC2V78FD-1
Air-cooled,4-stroke,ohv90L,V-twin cylinders
78mm×71mm（3.0″×2.8″）
678cc
1.6L（0.42gal）/filter replacement
Transistorized magneto
Electric start
12V/8.3A
50 Hz/ 60 Hz
220 V/230 V/240 V
8.5Kw/9.5Kw
9.5Kw/10.5Kw
25L（6.6gal）
868×635×676（34.2″×25″×26.6″）
160Kg（353lb）
www.disc.ie
35
Generators
STEPHILL 5000HMS
PETROL GENERATOR
STEPHILL 6500HMS
PETROL GENERATOR
Model
5000HMS
Model
6500HMS
OUTPUT:
SOCKETS:
5.0kVA / 4.0KW
BS4343 industrial sockets 1 x 115V 16A sockets
HONDA GX270
9.0/1
Recoil Start
6.0 litres
L690x W480 x H540mm
59kg
Trolley Kit, Electric Start,
Metal Long Range Fuel Tank,
Single Voltage,Gas Conversion
OUTPUT:
6.5kVA (5.2kW), 50Hz, 230/115 volt, single phase.
CONTROL BOX:
Alternator top mounted metal control box
comprising 2x230v/16a, 1x115v/16a & 1x115v/32a
BS4343 socket outlets, changeover switch and MCB
overload protection.
Honda GX390 re-coil start, single cylinder air cooled
petrol engine with “oil alert” low oil level shutdown,
fitted with fuel tank and exhaust silencer.
NSM NAC brushless maintenance free alternator,
single bearing.
6.5 litre fuel tank giving 2.6Hrs @ 75% load.
1” heavy
duty tubular steel wrap-around frame
Angled
anti-vibration mounts.
72dB (A) @ 7 metres. 97Lwa
L690mm x W480mm x H540mm
71kg (dry).
ENGINE:
HP/CYLINDERS:
START:
FUEL TANK:
RUN TIME:
NOISE LEVEL:
SIZE:
WEIGHT:
OPTIONS:
ENGINE:
ALTERNATOR:
FUEL TANK:
FRAME:
MOUNTS:
NOISE LEVEL:
DIMENSIONS:
WEIGHT:
STEPHILL 6000YMEX
DIESEL GENERATOR
36
Model
6000YMEX
kVA @ 50 Hz
KW @ 50 Hz
Engine
Alternator Type
Sockets
Overload Protection
Noise Level dBA @ 7M
Fuel Capacity Litres
Approx Running Hours
Dimensions
6.0
4.8
Yanmar L100
Markon
BS4343 2 x 230v(16A)
Reset Button
75
5.5
3.5
L815 - W480 - H620 mm - 129Kg
www.disc.ie
Generators
STEPHILL SE6000D4
DIESEL GENERATOR
Model
SE6000D4
OUTPUT:
6.0kVA / 4.8KW
SOCKETS:
BS4343 industrial sockets
1x 115V 32A sockets
YANMAR L100N Electric Start
10/1
24.0 litres
17 hours @ 75% Load
L1220x W735 x H885mm
174kg
Single Voltage, 115v CTE.
ENGINE:
HP/CYLINDERS:
FUEL TANK:
RUN TIME:
NOISE LEVEL:
SIZE:
WEIGHT:
OPTIONS
STEPHILL SSD10000S
DIESEL GENERATOR
STEPHILL SSD8500S
DIESEL GENERATOR
Model
SSD8500S2
SSD10000S
OUTPUT:
SOCKETS:
8.0kVA (6.4kW), 50Hz 1Phase
2 x 115V 32A socket
1 x 230V 32A socket
Kubota Z602, 2 cylinder water cooled diesel.
Integral 37litre tank
16 hours continuous use at 75% load.
68dB (A) @ 7mtr 93LWA
L1285 x W655 x H900mm excluding trolley
295kg (dry). 315kg complete with optional trolley
Cost options – Trolley kit, Single voltage,
ATS Panels , Automatic Voltage Regulator (AVR)
Highway trailer (Ball hitch), spark arrestor.
10kVA (8.0kW), 50Hz, 115 & 230 volt, single phase.
1x16a & 2x32a 115v
2x16a & 1x32a 230
Two wire remote start connection as standard
ENGINE:
FUEL TANK:
RUN TIME:
NOISE LEVEL:
SIZE:
WEIGHT:
OPTIONS:
Kubota D722, 3 cylinder water cooled diesel.
Integral 37 litre tank
13hours continuous use at 75% load.
L.1285 x W. 655 x H. 900mm
355kg (dry).
Two wheel trolley, 3 phase version, single voltage
version, ATS panel, remote start box, welfare
option kit which includes oil cooler, high
efficiency fan and standard ducting. Automatic
Voltage Regulator (AVR).Highway Trailer (Ball
Hitch), Spark arrestor, chalwyn valve.
www.disc.ie
37
Generators
STEPHILL SSDK16M DIESEL GENERATOR
Model
SSDK12M
SSDK16M
OUTPUT:
ENGINE:
ALTERNATOR:
12kVA (9.6kW), 50Hz, 115 / 230 / 400 volt, multi phase.
Kubota V1505, 3 cylinder water cooled diesel.
Mecc Alte EC028/S4 brushless maintenance free,
AVR controlled alternator, single bearing.
Bunded 120 litre base tank giving 41hours
continuous use at 75%load. 3-way valve.
610kg (dry).
Dual Voltage, ATS ( Automatic Transfer Panel )
Highway Trailer
16kVA (12.8kW), 50Hz, 115 / 230 / 400 volt, multi phase.
Mecc Alte EC028/2L/4 brushless maintenance free
AVR controlled alternator, single bearing.
Bunded 120 litre base tank giving 34hours
continuous use at 75%load. 3-way valve.
665kg (dry).
Dual Voltage, ATS ( Automatic Transfer Panel )
Highway Trailer
FUEL TANK:
NOISE LEVEL:
SIZE:
WEIGHT:
OPTIONS:
Model
SSDK20M
OUTPUT:
20kVA (16.0kW), 3ph / 400v
19kVA (15.2kW), 1ph / 230v
19kVA (15.2kW), 1ph / 115v
Mecc Alte EC028/1VL4 brushless
maintenance-free with automatic
voltage regulator, single bearing.
Bunded 120 litre base tank giving 26 hours
continuous use at 75% load,
3-way valve fitted as standard.
L1800 x W800 x H1270mm
695kg (skid version).
Dual Voltage, ATS (Automatic Transfer
Panel) Highway Trailer
ENGINE:
ALTERNATOR:
FUEL TANK:
NOISE LEVEL:
SIZE:
WEIGHT:
OPTIONS:
STEPHILL SSDK20M
DIESEL GENERATOR
38
www.disc.ie
Generators
STEPHILL SSDP30 DIESEL GENERATOR
Model
SSDK25M
Model
SSDP30
OUTPUT (MAX):
25.0kVA (20.0kW), 50Hz, 3Ph 400v
20.0kVA (20.0kW), 50Hz, 1Ph 230v
20.0kVA (20.0kW), 50Hz, 1Ph 115v
Kubota V2003-T, 4 cylinder turbo charged
water cooled diesel.
Mecc Alte EC028VL4 brushless maintenancefree. AVR controlled alternator, single bearing.
OUTPUT:
SOCKETS:
30.0kVA / 24.0KW / 1 PHASE 230V
PERKINS 1103A-33G
3
280 litres
48 hours @ 75% Load
L2050x W1000 x H1450mm
1300kg (skid version), 1490kg (Wet), 1690
(Trailer).
3Phase ,ATS ( Automatic Transfer Panel )
Highway Trailer (Twin axle)
ENGINE:
ALTERNATOR:
FUEL TANK:
NOISE LEVEL:
SIZE:
WEIGHT:
OPTIONS:
Bunded 120litre base tank giving 24 hours
continuous use at 75% load. Fuel tank drain
plug. 3-way valve.
L1800 x W800 x H1270mm
ATS ( Automatic Transfer Panel ) Highway
Trailer
ENGINE:
CYLINDERS:
FUEL TANK:
RUN TIME:
NOISE LEVEL:
SIZE:
WEIGHT:
OPTIONS:
Model
SSDP33
OUTPUT:
SOCKETS:
33.0kVA / 26.4KW / Multi Phase
PERKINS 1103A-33G
3
280 litres
48 hours @ 75% Load
L2050x W1000 x H1490mm
ATS ( Automatic Transfer Panel ) Highway
Trailer (Twin axle)
ENGINE:
CYLINDERS:
FUEL TANK:
RUN TIME:
NOISE LEVEL:
SIZE:
WEIGHT:
OPTIONS:
STEPHILL SSDP33
DIESEL GENERATOR
www.disc.ie
39
Generators
Model
SSDP50
Model
SSDP70
OUTPUT:
50kVA (40.0kW), 3ph / 400v
50kVA (40.0kW), 1ph / 230v
Perkins 1103A-33TG1, 3 cylinder 3.3litre water
cooled diesel.
50kVA ECO 32-1L/4 Mecc Alte single bearing
brushless maintenance-free alternator with 3
Phase UVR6 automatic voltage regulator.
Bunded 350 litre base tank complete with 3
way valve giving 42hours use at 75% load.
63dBA @ 7 metres / 88LWA
L2450 x W1000 x H1490mm
1380kg dry, 1670kg wet. (skid base version).
Twin axle braked road tow trailer with full
lighting panel and ring hitch as standard or
ball hitch option, AMF/ATS panels, engine
coolant heater etc.
OUTPUT:
ENGINE:
67kVA (53KW), 50HZ / 3 Phase 400/230V
Perkins 1103A-33TE2, 3 cylinder 3.3litre water
cooled diesel.
60kVA ECO 32-2L/4 Mecc Alte single bearing
brushless maintenance-free alternator with 3
Phase UVR6 automatic voltage regulator.
Bunded 350 litre base tank complete with 3
way valve giving 33hours use at 75% load.
63dBA @ 7 metres. 88LWA
L2450 x W1000 x H1490mm
1410kg dry, 1700kg wet. (skid base version).
Twin axle braked road tow trailer with full
lighting panel and ring hitch as standard or
ball hitch option, AMF/ATS panels, engine
coolant heater etc.
ENGINE:
ALTERNATOR:
FUEL TANK:
NOISE LEVEL:
SIZE:
WEIGHT:
OPTIONS:
ALTERNATOR:
FUEL TANK:
NOISE LEVEL:
SIZE:
WEIGHT:
OPTIONS:
This portable dual voltage test centre is an essential piece of
Health & Safety testing equipment, designed to offer easy and
efficient voltage and frequency testing of generators. Load can be
applied up to a maximum of 4KW for testing generator
performance under load on both voltages via 2 x 115 and 2 x 230
volt sockets.
Generator Test Equipment Dual Voltage 115/230V
GENERATOR TEST EQUIPMENT
40
Specifications
This portable dual voltage test centre is an essential piece of
Health & Safety testing equipment, designed to offer easy and
efficient voltage and frequency testing of generators. Load can be
applied up to a maximum of 4KW for testing generator
performance under load on both voltages via 2 x 115 and 2 x 230
volt sockets.
www.disc.ie
Heating & Cooling
BIEMMEDUE GE36 DIESEL/KEROSENE
SPACE HEATER
SPACE HEATER
SPACE HEATER
BIEMMEDUE EC32 / BIEMMEDUE EC55 DIESEL/KEROSENE
SPACE HEATER
MODEL
GE 20
GE 36
GE 46
EC 32
EC 55
RATED HEATING POWER Hi kw / kcal/h
20 / 17,234
36 3/ 1,002
46 / 39,568
32-27,534
55-47,318
RATED HEATING Power Hs kw / BTU/h
21.4 / 73,110
38.4 / 131,512
49 / 167,850
34.1-116,803
58.6-200,728
THERMAL EFFICIENCY %
100
100
100
84.6
89.5
350
605
1,400
1,150
2,500
TEMPERATURE RISE C
170
177
97
70
66
CONSUMPTION kg/h
1.69
3.04
3.88
2.70
4.64
ELECTRICAL POWER V, ~, Hz
230, 1, 50
230, 1, 50
230, 1, 50
230, 1, 50
230, 1, 50
POWER ABSORBTION W
300
300
430
370
850
TANK CAPACITY L
17
42
42
42
65
DIMENSIONS (LxWxH) mm
740x300x445
1,075x440x615
1,075x440x630
1,215x440x670
1,435x555x940
WEIGHT kg
20
25
38
48
80
3
AIR FLOW m /h
o
www.disc.ie
41
Heating & Cooling
PREDATOR IR2800 ELECTRIC HEATER
Heavy Duty Construction
Quick to Heat
Fully Portable with 2 Lockable Wheels
2.5 m Power Cable
2x 1.4 kW Halogen Bulbs
Model
IR2800
Colour finish :
Weight (kg) :
Dimensions (mm) :
Brand :
Heat settings :
Controls :
Tip over safety cut out :
Overheat safety cut out :
Carry handle(s) :
Cord storage :
Power on indicator light :
Castors for easy mobility :
Main body material :
Power heat (kW) :
Voltage (V) :
Frequency (Hz) :
Protection class I or II :
Plug Amp (A) :
Net weight (kg) :
Cat. Ref. :
Red
15.7
885x550x490
PREDATOR
2
Rocker
yes
yes
yes
yes
yes
yes
Metal
3
230 / 115
50
I
13 / 16
15.7
IR2800
OUTDOOR IR1300
INFRARED HEATER
Patio Heaters Type
Electric Heater Type
Heating Element
Body material
Reflector material
Voltage
Max watt
42
Electric
Infrared Heater
halogen lamp
Die casting aluminium
Aluminium
230V
1300W
www.disc.ie
Heating & Cooling
VAL 6 DAYSTAR
INFRARED DIESEL/KEROSENE HEATER
VAL 6 HG125NA
INFRARED DIESEL/KEROSENE
HEATER
VAL 6 KBE1S
HEATER
MODEL
VAL 6 DAYSTAR
VAL 6 HG125NA
HEAT OUTPUT
FUEL
TANK CAPACITY
POWER SOURCE
POWER CONSUMPTION
CONTROL SYSTEM
SAFETY DEVICE
13,000kcal/h (15KW)
Kerosene, #1 Diesel
10 LITERS
230V/50Hz
130W
5SEC. PREPURGE
PHOTOCELL FLAME MONITOR
3A (1.6A) FUSE
OVERHEAT PREVENTION SYSTEM
TIP-OVER SWITCH
1.5 l/h
593X310X600 (mm)
18kg
THERMOSTAT CONNECTOR
116,000BTU/h (34kW)
Kerosene, #1 Diesel
54 LITERS
110V/50Hz, 120V/60Hz
150W
FUEL CONSUMPTION
EXTERNAL DIMENSION (HxWxD)
DRY WEIGHT
ACCESSORY
VAL 6 EP6JA
HEATER
3A FUSE
3.4l/h
30.7x22.3x28.1 (in)
82 lbs
THERMOSTAT TERMINALS
VAL 6 EPX
HEATER
MODEL
KBE1S
VAL 6 EP6JA
VAL 6 EPX
HEAT OUTPUT
FUEL
TANK CAPACITY
POWER SOURCE
POWER CONSUMPTION
CONTROL SYSTEM
SAFETY DEVICE
28,000kcal (32.5KW)
Kerosene, #1 Diesel
35 LITERS
230V/50Hz
60W
5SEC. PREPURGE
1.6A FUSE
34,500kcal (40kW)
Kerosene, #1 Diesel
40LITERS
230V/50HZ
65W
5SEC. PREPURGE
1.6A FUSE
FUEL CONSUMPTION
EXTERNAL DIMENSION (HxWxD)
DRY WEIGHT
ACCESSORY
3.21 l/h
810X655X695(mm)
38kg
THERMOSTAT TERMINALS
3.8 l/h
965x630x1170 (mm)
53kg
THERMOSTAT CONNECTOR
35,000 kcal/hr
Kerosene, #1 Diesel
58LITERS
230V/50HZ
117W
5SEC. PREPURGE
OVERHEAT PROTECTION
OVERVOLTAGE PROTECTION
TIP-OVER SENCER
3.19 kg/hr
970x645x1,235 (mm)
50kg
www.disc.ie
43
Heating & Cooling
GP-M MOBILE GAS/LPG DIRECT FIRED SPACE HEATERS
MAX HEATING POWER kW
kcal/h
IR OUTPUT m3/h
EMPERATURE RISE (a 20° C)
CONSUMPTION AND FEEDING PRESSURE G31 kg/h - mbar
ELECTRICAL POWER V, ~, Hz
POWER ABSORPTION W
GP 25 M
GP 45 M
GP 60 M
GP 90 M
13,9÷30,2
12.000÷26.000
650
64÷138
1,08/2,35-500/2.000
230, 1, 50
50
19,8÷52,3
17.000÷45.000
1.400
42÷110
1,54/4,06-500/2.000
230, 1, 50
125
30,2÷73,6
26.000÷63.300
2.100
43÷104
2,36/5,72-500/2.000
230, 1, 50
180
32,6÷96,5
28.000÷83.000
3.260
29÷88
2,53/7,50-500/2.000
230, 1, 50
325
VENTILATOR / FUME EXTRACTOR
300MM FAN
Voltage
Power Input
Diameter
Air Flow
Noise Level
Duct Length
Quality Approvals
44
110v or 220v
550 Watt
300mm
62 M/Min
68dba
5m
Ce, Gs, Rohs
www.disc.ie
DUCTING
Hydraulic And Pneumatic Breaking Equipment
The benefits of hydraulic tools are numerous. Hydraulic systems are cheaper to buy,
run and maintain, leading to obvious cost reductions for the operator. The rugged
design of the machinery also offers trouble-free performance and powerful, but
economic performance.
HPP09 POWER PACK
HPP06 POWER PACK
HPP18V POWER PACK
Model
HPP06
HPP09
HPP18V
Oil flow, l.p.m.
Max. pressure, bar
Engine
Flow
Starter
Weight, kg
Noise level 1 m LPA dB
Noise level LWAdB
1x18
110
Honda 6.5 HP petrol
Adjustable
Recoil
54
88
100
1X20
150
Honda 9 HP petrol
POR (automatic)
Recoil
68
88
100
1x10-15-20-30-40, 2x10-15-20
160
Vanguard 18 HP petrol
Adjustable
Recoil and electric
112
89
101
BREAKING HAMMERS
HH20 BREAKING HAMMER
HH10 BREAKING HAMMER
Model
HH10
HH20
Weight, kg
Oil flow, l.p.m.
Working pressure, bar
Max. pressure, bar
Blow frequency, 1/min
Noise level 1 m LPAdB
Noise level LWAdB
Vibration level (3 axis) m/s²
Tool size, mm hex
9.9
20
100
160
2100
93
105
9.6
19x50
22
20
110
160
1560
94
106
6.8
25X108
www.disc.ie
The unique PROLINE handle offers the operator
a vibration level down to as little as 4.8 m/s²,
which give maximum protection and less
fatigue. The result is higher efficiency – you get
more work done.
The breakers have very few wearing parts
ensuring the lowest lifetime cost possible. A
HYCON breaker gives you the best TCO (Total
Cost of Ownership).
Quality is never an accident – it is always the
result of intelligent effort.
45
HRD20 ROCK DRILL HAMMER
ROCK DRILL
HAMMER
Model
HRD20
The HYCON HRD20 rock
drill is the only tool on the
market with built in air
flushing and 4 different
settings of blow frequency
and rotations. The
investment in a HYCON
HRD20 rock drill and a
HYCON powerpack is
therefore the best
investment on the market
Oil flow, l.p.m.
Max pressure, bar
Tool chuck size, mm hex
Rotation
Weight, kg
Noise level LWAdB
Air supply
Vibration level, m/s²
25-30
115
150
22x108
Counterclockwise
20
95
107
max. 0.08 m³/min./2 bar
23.6
HCD50 CORE DRILL
CORE DRILLS
Model
HCD50
With a HYCON hydraulic handheld core drill
you will achieve a significant improvement of
your profits as there are no costs for setting
up a rig.
The performance of the core drill allows for
drilling of holes up to ø350 mm in all
materials - also with reinforcement.Therefore
it is only necessary to invest in ONE core drill
for many different kinds of jobs.
Weight, kg
Oil flow, l.p.m.
Max. pressure, bar
r.p.m./drilling diameter
Vibration level m/s²
7.6
20
100
170
600/ø50-ø350mm
80
<2.5
HCS18CUT-OFF SAW
CONCRETE SAWS
The hydraulic cut-off saw from
HYCON is available in 3
versions 14”, 16” and 18”. All
types can be used for
horizontal and vertical
cutting. They cut all types of
concrete, steel, bricks, asphalt
etc.
46
Model
HCS18
Disc size
Oil flow, l.p.m.
Max. pressure, bar
Cutting depth, mm
Noise level 1 m LWA dB
Vibration level, m/s²
18"/ø450mm
0-34
120
172
187
99
110
<2.5
www.disc.ie
EARTH AUGER DRILL
POST DRIVER
Model
Earth Drill
Model
Earth Drill
Oil flow, l.p.m.
Max. pressure relief valve, bar
Vibration level (3 axis) m/s²
9.4
Weight, kg
Adaptors:
Square, mm
Round, mm
Other sizes
Remote valve
20-30
100
160
Weight, kg
Oil flow l.p.m
Max. pressure, bar
Built-in torque limitter, bar
Noise level 1 m LwAdB
Vibration level m/s²
19.6
20-40
80
210
90
91
100
<2.5
96
29
65x65
Ø60+Ø80
On request
Yes
HWP2 WATER PUMP
HWP3 WATER PUMP
Model
HWP2
HWP3
Oil flow, l.p.m.
Max. pressure, bar
Weight, kg
Capacity/hour, m³
Solids, mm
Max head, m
20-30
172
7.7
46
up to ø38
28
20-30
172
11
80
up to ø63
22
www.disc.ie
47
Log Holders & Splitters
BENCH SAWS
The patented Bench Jaws are quick and easy to fit to any
adjustable workbench, including the Black & Decker Workmate.
The log clamps can be used on those occasions when you need
to safely saw a few small logs. Their rugged construction allows
them to securely grip logs to allow them to be cut for firewood
or any other purpose.
TECHNICAL Specification
Length: 105mm x W 40mm x H 210mm
Max log diameter: 150mm*
4 jaws in a set
Weight: 1kg
*assumes the max opening of the bench to be 100mm.
BENCH JAWS
SAW LOG HORSE
The patented Saw Log Horse is a lightweight saw horse designed
for domestic use. The unique chain locking method makes one
man operation simple and combined with the toothed “v” clamp
secures the log against rotation when cutting with a chainsaw.
The Saw Log Horse requires minimum initial assembly and then
can simply be folded for transport & storage then opened for
use.
Technical Specification
- Easy 1 man operation
- Simply folds & opens for use
- Holds logs or timber securely
- Holds logs of any length
- Log diameter of 25 - 250mm
- Can hold multiple logs
- Height 750mm
- Length 910mm
- Width 925mm
- Weight 7kg
BULK SAW HORSE
48
SAW LOG HORSE
BULK SAW HORSE
The Bulk Saw Horse allows the user to easily cut multiple logs of
varying lengths and thickness with a chainsaw. The logs are
quickly secured and released by the patented foot operated
chain lock. The length of the cut logs can be controlled by
altering the distance between the legs. The Bulk Saw horse
weighs only 8kg and easily folds for carrying.
- Quick and easy to use
- Holds multiple logs of varying diameter
- Spacing of legs can be set for required log length
- Logs are easily secured by locking chain
- Folds flat for storage
- Length 700mm
- Width 540mm
- Height 800mm
- Weight 8kg
- Weight 7kg
www.disc.ie
QUICK FIRE SAW HOUSE
QUICK FIRE SAW HORSE
ULTIMATE SAW
HORSE
The patented new
Ultimate Saw Horse can
handle logs, timber or any
other type of wood. The
unique chain locking
method makes one man
operation simple and
combined with the
toothed “v” clamp secures
the log against rotation
when cutting with a
chainsaw.
The patented new Quick Fire
Saw Horse holds the log
firmer, safer and is quicker to
use than any other similarly
priced log saw horse. No
adjustments needed to
accomodate different sized
logs, the independently
pivoting teeth automatically
adjust to grip the log all round.
The whole log can be cut
without having to move it.
Comes ready for use straight
out of the box, no need for
assembly and folds flat for
storage.
- Easy rapid load
- Quickly folds & opens for use
- Maximum Log Length 4M
- Maximum Log Weight 150kg
- Height 900mm
- Length 1100mm
- Width 380mm
- Weight 9.8kg
- Easy 1 man operation
- Quickly folds & opens for use
- Maximum Log Length 6M
- Maximum Log Weight 300kg
- Can hold multiple logs
- Height 750mm
- Length 1300mm
- Width 500mm
- Weight 12.7kg
ULTIMATE SAWHORSE
V-SMART SAW HORSE
The Smart wood holder folds
flat and is easilly portable. the
folded size is 1180 x 380mm x
50mm and weighs only 12kg.
Fully adjustable gripping jaws
that can be set to different
diametres to suit the width of
logs and wood.
- Thickness of wood: 2.5 - 23 cm
- Length of wood: no limit
- Length: 118 cm
- Width: 38 cm
- Height, disassembled: 5 cm
- Height, assembled: 95 cm
- Working height: 60 cm
- Weight: 12kg
V -SMART SAW HORSE
www.disc.ie
49
DUOCUT ELECTRIC LOG SPLITTER
Our electric log splitters come supplied with
our unique Duocut blade. This enables it them
to have twice the effective splitting capacity of
similarly rated electric log splitters and ensures
that if a knot is encountered at one end, it will
still split from the other.
ULTIMATE LOG SPLITTER
ULTIMATE LOG SPLITTER
The Ultimate Log Splitter can be
used by all the family to easily,
efficiently and safely split logs up
to 600mm in length. The specially
designed blade makes it much
easier and less tiring to use than
conventional axes or wedges.
TECHNICAL Specification
- Max height from base 1675mm
- Max log length 600mm
- Weight of drop weight 2.8kg
- Up to 15 ton splitting capacity
- Total weight 8.4kg
- Blade width 55mm
- Blade height 170mm
- Base to blade safety gap 25mm
- Can be used with the “Ultimate
Splitting Base Blade” for increased
efficiency..
- Efficient twin blade operation
- Force 4 tons / 5 tons
- Splitting Capacity (Duocut blade) 8 tons / 10
tons
- Motor 1500 W / 2200W
- Max log length (single blade) 370mm /
520mm
- Max log length (Duocut blade) 300mm /
450mm
- Max log diameter 250 mm (500 mm Duocut)
- Weight 37kg / 47kg
- Supplied with Duocut blade and stand
PETROL LOG SPLITTER
This 10 ton petrol driven log splitter has a 6.5hp
motor and can be used in 3 positions, vertical,
horizontal and 60 degrees, making it more
versatile than the competition. It can handle logs
up to 520 mm in length and 380mm in diameter.
It is fitted with a 12 gpm pump and has a cycle
time of 12 seconds.
V-SMART LOG SPLITTER
The Smart Splitter is so easy to
set up and use.
- Ease of use
- Safety in mind
- Ergonomic features
- Effective Splitting
- Minimal Storage
- Environmentally Friendly
- Low cost features
50
PETROL LOG SPLITTER
www.disc.ie
- Splitting Force 10 tons
- Engine: JF200 6.5HP
- Pump: 12 GPM
- Cycle time: 12 seconds
- Ram diameter: 3" / 76mm
- Maximum log length: 520mm / 20"
- Maximum log diameter: 380mm / 15"
- Dimensions: H 1500mm x W 650mm x D 750mm
- Working height horizontal: 800mm
Paint Sprayer & Decorating
EARLEX STEAM MASTER
EARLEX WD1000 COMBI VAC
LMB Steam Master
Earlex WD1000 combi vac
The professional system that brings a new
meaning to fast and efficient stripping.
This is an indispensable system that can tackle the tough
stuff is super charged to not only take
on all types of dirt inside and out but cope with any form of
dirt whether its dry damp or liquids.
• 20 Litre Dry Capacity
• 12 Litre Wet Capacity
• 1.8m Hose
• 3m Cable
• 1000w Motor
• 5 Attachments
• 4 Wheels
• Reverse Airflow Switch
• 2750 watt element
• 7.5 litre anodised tank
• 5 meter anti-kink cool run hose
• Exterior water level indicator
• Built in step
• Large lightweight steam plate
• 3 year anti corrosion guarantee
Titan Advantage 600
The ADVANTAGE 600 is the perfect sprayer for residential
repaints and smaller commercial jobs. Sprays all coatings,
from stain and sealers to enamel, latex and light
elastomerics.
TITAN ADVANTAGE 600
• Exclusive DCX Motor and Brushless PMDC sealed and
protected from overspray
• Easy-Carry Handle
• Lifetime Service
• Sleeveless fluid section minimizes repair costs
• Time tested, painter proven fluid section
www.disc.ie
51
Plumbing
52
69632
EGA MASTER 6” BENCH VICE
61206
EGA MASTER CHAIN VICE
61200
EGA MASTER CHAIN VICE STAND
69052
EGA MASTER ½” TO 2”
MANUAL THREADER
60152 / 60162
EGA MASTER ROSCAMATIC 2
ELECTRIC THREADER 110 VOLT
60005
EGA MASTER MANUAL
TEST PUMP
60225
EGA MASTER 110 VOLT
TEST PUMP
60015
EGA MASTER ¼” TO 2”
PIPE BENDER
www.disc.ie
60016
EGA MASTER ¼” TO 3”
PIPE BENDER
POWER TOOLS
HITACHI POWER TOOLS
CORDED
WR22SA
Capacity
Drive
Full Load
Impact Rate
W6VB3
WR16SA
DH24PC3
CN16SA NIBBLER
No-Load
Speed
Overall
Length
Power
Input
Standard
Accessories
Voltage
Weight
0-1000,
3000/min
333mm
790W
Side handle,
depth stop,
carrying case
230/110V 2.2kg
0-4500/min
312mm
620W
Magnetic hex
socket, sub
stopper
230/110V 1.4kg
DV20VB2
Brick: 20mm, Steel:
13mm, Wood:
40mm
W6VB3
TEKS® Screw: 6mm,
Drywall Screw:
6mm, Wood Screw:
5.8mm
WR16SA
Ordinary bolt M12M22, High tensile
bolt M12-M16
1/2"
square
2100/min
1900/min
258mm
480W
Wrench, side
handle
230/110V 2.8kg
WR22SA
Ordinary bolt M14M24, High tensile
bolt M16-M22
3/4"
square
2000/min
1800/min
302mm
850W
Side handle,
carrying case
230/110V 4.8kg
DH24PC3
Concrete: 24mm
(drill) 50mm (TCT
core), Steel: 13mm,
Wood: 32mm
0-4600/min
0-1150/min
351mm
800W
Side handle,
depth stop,
carrying case
230/110V 2.4kg
CN16SA
NIBBLER
Mild steel 1.6mm,
Stainless steel
1.2mm, Aluminium
plate 2.3mm
2300/min
250mm
400W
Die, punch,
2 wrenches
230/110V 1.7kg
0-13000,
39000/min
www.disc.ie
53
POWER TOOLS
C9U2
235MM CIRCULAR SAW
Blade Diameter
Bore Size
Max Cut Depth
No-Load Speed
Overall Length
Power Input
Standard Accessories
Voltage
Weight
CJ110MV
JIGSAW 720W
C7SB2
185MM CIRCULAR SAW
235mm
30mm
0°: 86mm, 45°:
65mm
5000/min
397mm
2000W (230V),
1670W (110V)
20 tooth TCT saw
blade, dust
extraction adapter,
guide, wrench,
carrying case
230/110V
6.8kg
Blade Diameter
Bore Size
Max Cut Depth
185mm
30mm
0°: 60mm, 45°:
47mm
5800/min
305mm
1710W (230V),
1670W (110V
18 tooth TCT saw
blade, guide,
wrench, carrying
case
230/110V
4.6kg
No-Load Speed
Overall Length
Power Input
Voltage
Weight
Capacity
Length Of Stroke
Min Cutting Radius
No-Load Speed
Overall Length
Power Input
Voltage
Weight
Wood: 110mm
Mild steel plate: 10mm
26mm
25mm
850-3000/min
240mm
720W
230/110V
2.2kg
G23SS
230MM GRINDER 2000W
G12SS
115MM GRINDER 580W
GP2S2
DIE GRINDER 520W
G12SR3
115MM GRINDER 730W
Arbor
No-Load Speed
Overall Length
Power Input
Spindle Thread
Voltage
Weight
Wheel Diameter
G12SS
22mm
11000/min
254mm
580W
M14 x 2
230/110V
1.4kg
115mm
G12SR3
22mm
10000/min
254mm
730W
M14 x 2
230/110V
1.4kg
115mm
G23SS
22mm
6600/min
463mm
2000W
M14 x 2
230/110V
4.3kg
230mm
25000/min
359mm
520W
230/110V
1.7kg
25mm
GP2S2
54
www.disc.ie
POWER TOOLS
Capacity: Collet Chuck
No-Load Speed
Overall Height
Plunge Depth
Power Input
Voltage
Weight
M12V2
1/2 IN VARIABLE SPEED ROUTER
CR13V2
VARIABLE SPEED RECIPROCATING SAW
Capacity
Length Of Stroke
No-Load Speed
Overall Length
Power Input
Voltage
Weight
Pipe: 130mm, Mild steel plate: 19mm,
Wood (cut depth): 300mm
29mm
0-2800/min
435mm
1010W
Blade, wrench, carrying case
230/110V
3.2kg
12.7mm (1/2 in)
8000-22000/min
360mm
65mm
2000W (230V), 1570W (110V
230/110V
6.3kg
CR13VBY
LOW VIBRATION RECIPROCATING SAW 1150W
Capacity
Length Of Stroke
No-Load Speed
Power Input
Voltage
Weight
www.disc.ie
Pipe: 130mm, Steel plate: 19mm,
Wood: 300mm
32mm
0-3000/min
1150W
Blade, carrying case
230/110V
4.4kg
55
POWER TOOLS
HITACHI POWER TOOLS
CORDLESS
DV18DSDL/JW
18V COMBI DRILL
WITH 4.0AH LI-ION BATTERIES
KC18DKL/JA
2 PCE 18V CORDLESS KIT
WITH 4.0AH LI-ION BATTERIES
3 Year Warranty
Battery
Capacity
Charging Time
Impact Rate
Max Torque
No-Load Speed
Overall Length
Voltage
Weight
56
Y (registration required within 4 weeks
of purchase)
2 x BSL1840 high capacity 4.0Ah Li-Ion
Batteries
Brick: 16mm, Wood: 65mm, Metal:
13mm, Bolt: M6-M14
60 Minutes
High: 0-27000/min, Low: 0-6000/min
92Nm / 145Nm
High: 0-1800/min, Low: 0-400/min, 02600/min
235mm, 166mm
2 x BSL 1840 high capacity 4.0Ah Li-Ion
batteries, UC18YRSL, Side handle, Driver
bit, Carrying case
18V
2.2kg, 1.7kg
3 Year Warranty
Battery
Capacity
Charging Time
Impact Rate
Max Torque
No-Load Speed
Overall Length
Voltage
Weight
www.disc.ie
Y
Batteries
Brick: 16mm, Wood: 65mm, Metal:
13mm
60 Minutes
High: 0-27000/min, Low: 0-6000/min
92Nm
High: 0-1800/min, Low: 0-400/min
235mm
2 X BSL 1840 high capacity 4.0Ah Li-Ion
batteries, UC18YRSL fan cooled charger,
Side handle, Driver bit, Carrying case
18V
2.2kg
POWER TOOLS
DH36DAL
36V SDS-PLUS LI-ION
HAMMER DRILL
3 Year Warranty
Battery
Capacity
Charging Time
Impact Energy
Impact Rate
No-Load Speed
Overall Length
Voltage
Weight
DH24DVA/JC
24V SDS-PLUS HAMMER DRILL
NICAD BATTERY
DH36DAL
DH24DVA/JC
WR18DSHL/JW
Y
2 x BSL3626 2.6Ah Li-Ion
Concrete: 26mm, Metal:
13mm, Wood: 30mm
680 Minutes
2.8 Joules
0-2250/4500
0-550/1100/min
322mm
2 batteries, UC36YRL charger
ide handle, depth gauge,
carrying case
236V
4.0kg
Y
2 x EB2420 2.0Ah Ni-Cad
Concrete: 24mm, Mild steel:
13mm, Soft wood: 30mm
50 Minutes
2.8 Joules
0-45000/0-2200/min
0-1050/0-250/min
322mm
UC24YFB charger, 2 batteries,
side handle, depth stop,
carrying case
24V
4.1kg
Y
Bolt: M12-M22, HT Bolt: M12-M16
G18DSL/JW
18V GRINDER
Arbor
Battery
Charging Time
No-Load Speed
Voltage
Weight
Wheel Diameter
WR18DSHL/JW 18V IMPACT
WRENCH WITH 4.0AH LI-ION
BATTERIES
22mm
2 x BSL1840 high
capacity 4.0Ah LiIon Batteries
60 Minutes
9100/min
18v
1.8kg
115mm
NT65GB
CORDLESS GAS FINISH NAILER
Actuation Type
Battery
Charge Time
Fuel Cell Capacity
Length / Height
Full sequential
2 x 3.6V 1.5Ah LiIon batteries
60 minutes
Up to 1200 nails
L 260mm, H
283mm
100 nails
32-65mm
Magazine Capacity
Nail Length
Nail Type, Paper Collated,
Nail Angle
16 Gauge angled
finish nails
Voltage
3.6V
Weight
1.8kg
Barcode
4966376160365
www.disc.ie
60 Minutes
1500/min
264mm
2 X BSL 1840 high capacity 4.0Ah
Li-Ion batteries, UC18YRSL fan
cooled charger, carrying case
18V
3.4kg
NR90GC2
CORDLESS GAS FRAMING NAILER
Actuation Type
Battery
Full sequential
2 x EB714S 7.2V
1.4Ah NiCad
60 minutes
Up to 1200 nails
90 Joules
25-37 nails
50-90mm
Charge Time
Fuel Cell Capacity
Impact Energy
Magazine Capacity
Nail Length
Nail Type, Paper Collated,
Nail Angle
Clipped head,
paper collated,
34° angle
Voltage
7.2V
Weight
3.5kg
57
POWER TOOLS
KEYANG POWER TOOLS
Voltage
No load Speed
Battery capacity
Weight
Impact Rates
Max. work capacity
Vibration value
36V
0~1,150/min
2.6/3.0Ah
4.8kg
0~5,010/min
28mm for concrete
Hammer drilling: 11㎨
Chiseling: 7.5㎨
DH-3600L
CORDLESS ROTARY HAMMER
Wattage
Weight
No-load Impact Rate
Vibration value
1,050W
5.4kg
3,500/min
Chiseling: 11.5㎨
KH-5000M
DEMOLITION HAMMER
Wattage
Weight
Max. capacity
No-load Speed
Impact Rates
Vibration value
1,100W
6.4kg
40mm for concrete
235~500/min
1,350~2,870/min
Hammer drilling: 8.5㎨
Chiseling: 7㎨
PHD-40MV
HAMMER DRILL
58
www.disc.ie
POWER TOOLS
MILWAUKEE POWER TOOLS
C18PD COMPACT PERCUSSION DRILL
HD18PD402C
Battery pack capacity [Ah]
Battery type
Charger supplied
Chuck capacity [mm]
Max. drilling masonry [mm]
Max. drilling steel [mm]
Max. drilling wood [mm]
Max. percussion rate [bpm]
Max. torque [Nm]
No load speed gear 1 [rpm]
No. of batteries supplied
Supplied in
Voltage [V]
Weight [kg]
−
Li-ion
−
13
8
13
45
29,000
60
0 - 550
0 - 1700
0
−
18
1.5
HD18 HX SDS HAMMER DRILL
Battery type
Charger supplied
Max. drilling concrete [mm]
Supplied in
Voltage [V]
Weight [kg]
−
Li-ion
−
24
13
30
4200
0
−
18
3.0
Battery type
Charger supplied
Chuck capacity [mm]
Max. torque [Nm]
Supplied in
Voltage [V]
Weight with battery pack [kg]
4.0
Li-ion
80 min
13
16
13
55
28,000
85
0 - 450
0 - 1800
2
Kitbox
18
2.5
HD18 HIWF-402 COMPACT IMPACT WRENCH
Battery type
Charger supplied
Impact rate [ipm]
Max. torque [Nm]
No load speed [rpm]
Supplied in
Voltage [V]
www.disc.ie
4.0
Li-ion
80 min
0 -2200
610
0 - 1900
2
Kitbox
18
3.0
59
POWER TOOLS
KANGO 545 S
ROTARY HAMMER
KANGO 540 S
ROTARY HAMMER
KANGO 900
BREAKING HAMMER
KANGO 750 S
ROTARY HAMMER
KANGO 540 S
Full load hammer action [bpm]
Full load speed [soft hammer] [rpm]
Max. drilling core bit [mm]
Max. drilling tunnel bit [mm]
No load speed [rpm]
Power input [W]
Supplied in
Vibration chiseling
Vibration drilling
Weight [kg]
3000
430
40
105
65
450
1100
Kitbox
16.7
16.8
6.3
C18 IW
COMPACT IMPACT WRENCH
Battery type
Charger supplied
Impact rate [ipm]
Max. torque [Nm]
No load speed [rpm]
Supplied in
Voltage [V]
Weight [kg]
60
KANGO 545 S
Li-ion
−
0 - 3200
250
0 - 2200
0
−
18
1.2
1.9
KANGO 750 S
KANGO 900
2740
240
975 - 1950
150
80
300
1550
Kitbox
9.1
9.5
8.2
HD18 SX
HEAVY DUTY SAWZALL
Battery type
Charger supplied
No load stroke rate [spm]
Stroke length [mm]
Supplied in
Voltage [V]
Weight [kg]
Li-ion
−
0 - 3200
0
25
−
18
3.3
−
www.disc.ie
1600
Kitbox
11
11
HD18 AG-115
HEAVY DUTY 115 MM ANGLE GRINDER
Battery type
Charger supplied
Disc diameter [mm]
No load speed [rpm]
Spindle size
Supplied in
Voltage [V]
Weight [kg]
Li-ion
−
115
9000
0
M 14
−
18
1.7
POWER TOOLS
HD18 BS
HEAVY DUTY METAL BANDSAW
Battery type
Blade length [mm]
Charger supplied
Max. cutting capacity rect. stock
No load speed [rpm]
Supplied in
Voltage [V]
3.0
Li-ion
880
60 min
85 x 85 [mm]
146
2
Kitbox
18
4.8
SSD 1100 X
SAWZALL
Power input [W]
Stroke length [mm]
Supplied in
Weight [kg]
HD18 JSB
HEAVY DUTY BODY GRIP JIGSAW
Battery type
Li-ion
Charger supplied
−
Max. cutting capacity steel [mm] 10
Max. cutting capacity wood [mm] 120
Mitre capacity [degrees]
45
2050 / 2700
0
Pendulum action
Yes
Pendulum settings
4
Stroke length [mm]
26
Supplied in
−
Voltage [V]
18
Weight [kg]
2.2
WCE 30
125 MM WALL CHASER
0 - 2900
1100
28
Kitbox
3.2
Cutting width [mm]
Disc diameter [mm]
Max. cutting depth [mm]
No load speed [rpm]
Power input [W]
Spindle size
Supplied in
Weight [kg]
26
125
30
9500
1500
M 14
Kitbox
4.3
www.disc.ie
M1418C6
MULTIBAY CHARGER
Charging time
For battery type Li Ion
Supplied in
System
40/80 min
Yes
−
M14,M18
AS 500 ELCP CLASS L
DUST EXTRACTOR
Air volume [litres per minute]
Capacity [l]
Hose diameter [mm]
Max. vacuum [mbar]
Power input [W]
Supplied in
Weight [kg]
3700
50
36
250
1500
−
11
61
POWER TOOLS
PH 30
30 MM SDS-PLUS 3-MODE HAMMER
Power input:
Drilling dia. in concrete /
wood / steel: (mm)
Vibration (3-axis):
Weight:
Blow energy:
Full-load hammer action:
110 or 240 volts
Total Shipping Weight:
1030 W
30
40 / 13
14.5 m/s²
2.9 kg
3.5 J
0 - 3800 bpm
3kg
PLH 32
32 MM SDS-PLUS 3-MODE HAMMER
MS305DB
SLIDE COMPOUND MITRE SAW
Full load hammer action [bpm]
Full load speed [soft hammer] [rpm]
Power input [W]
Supplied in
Vibration chiseling
Vibration drilling
Weight [kg]
Bevel capacity left [degrees]
Bevel capacity right [degrees]
Blade diameter [mm]
Cable length [m]
Mitre capacity left [degrees]
Mitre capacity right [degrees]
No load speed [rpm]
Power input [W]
Weight [kg]
0 - 4500
0 - 800
32
32
16
40
900
Kitbox
15.5
22
3.6
UNIVERSAL MITRE SAW STAND
Base size [mm]
Bearing force [kg]
Collapsed size [mm]
Extendable up to [mm]
Height [mm]
Supplied in
Weight [kg]
62
www.disc.ie
1170
180
1340
2750
850
−
26
48
48
305
3
55
60
3200
1800
29.5
POWER TOOLS
AGP POWER TOOLS
DRC355
355mm DRY-CUT METAL SAW
MD350N
MAGNETIC DRILLING MACHINE
Power:
Voltage
No/Full Load min -1
Max Capacity:
Dia. X Depth of Cut
Dia. X Depth Twist Drill Bit
Magnetic Adhesion:
Net Weight:
1100W
110-120V
450/270
35 x 50mm
13 x 140mm
17,000 N
14Kgs
Power Input
Voltage
No Load min-1
Max. Cutting Capacities 90 deg:
2200W
110-120V~ 50-60Hz, 220-240V~ 50-60Hz
1300
Round Pipe
132mm
Square Stock
120mm (W) X 120mm(H)
Rectangular Stock
180mm(W) X 100mm(H)
Right Hand Miter
Round Pipe
105mm
Square Stock
90mm(W) X 90mm(H)
Rectangular Stock
90mm(W) X 120mm(H)
Left Hand Miter
25 deg. 80mm(W) x 120mm(H)
30 deg. 90mm(W) x 120mm(H) C-clamp required
25.4mm ( 1")
With
680mm x 360mm x 580mm
23.5 kgs (51.7Lbs.)
Max. Cutting Capacities 45 deg:
ARBOR
Soft Start
Overall Dimensions
Net Weight
SG6
STRAIGHT GRINDER
Power input
Voltage
No Load min-1
Spindle
Max. Wheel Diameter
Dimensions
Soft Start
& Overload Protection
Net Weight
110-120V:1300W,
220-240W:1500W
110-120V~ 50-60Hz
1600 ~ 4800
M14 (W/ 20mm Tool Holder)
150mm (6")
566mm x 80mm x 96mm
DG50
DIE GRINDER
Power input
Voltage
No Load min-1
Collet
Max. Wheel Diameter
Dimensions
Soft Start & Overload Protection
Weight
1200 W
110-120V~ 50-60Hz,
10,000 ~ 28,000
6mm *
50mm
480mmX 72mm X 77mm
With
2.2 Kgs
With
3.4kgs (7.48Lbs)
www.disc.ie
63
POWER TOOLS
Power input
Voltage
No Load min-1
Bevels
Miters
Blade
Arbor
Base Dimensions
Cutting Capacities
Net Weight
1200 W
110-120V~ 50-60Hz
3000 (50Hz)
0 to 45 Degrees
0 to 45 Degrees Left and Right
254 mm (10 in.)
30mm (1-3/16 in.) or 25.4mm (1 in.)
460 X 450mm
90 Degree Miter : 300mm X 60mm (11-13/16 X 2-3/8 in.)
45 Degree Miter : 212 mm X 60mm (8-3/8 X 2-3/8 in.)
19.5 kgs
GP255S
COMPOUND MITRE SAW
GS9FE
ELECTRIC DRYWALL SANDER
RP160
ROTARY POLISHER
Power Input
Voltage
No Load min-1
Full Load min-1
Grinding disk
Length
Soft Start
Net weight
RP220
ROTARY POLISHER
Power input
Voltage
No Load min-1
Spindle
Max. Recommended Pad Diameter
Soft Start & Overload Protection
Net weight
64
RP160
RP220
1200 W
110-120V~ 50-60Hz, 220-240V~ 50-60Hz
1000 ~ 2400
M14 or M16 (Specify when ordering)
150mm
With
2.3 kgs (5.06Lbs)
1700 W
www.disc.ie
800 ~ 2400
180mm
With
3.2 kgs (7.04Lbs)
550W
220-240V~ 50-60Hz
650 - 1800
380 - 950
ø225 mm (8-7/8 in.)
154 cm
With
4.7 kg
POWER TOOLS
DE25
WET/DRY VACUUM DUST EXTRACTOR
Power input
Voltage
Max. airflow
Max. suction (lift)
Protection
Max. dust capacity
Max. connected power tool
Soft Start
Net Weight
1200W
110-120V~ 50-60Hz,
20-240V~ 50-60Hz
4000 l/min (141.3 CFM)
25 kpa (250 mbar, 100.4
inches of water)
IP 44
25 L (6.6 gallons)
2200 W
With
12.9 kg (28.4 Lbs.)
AGP150
ROTARY LASER LEVEL
EV52
ELECTRIC
MIXER
EV160
ELECTRIC
MIXER
DM 160
WET + DRY DIAMOND CORE DRILL
Power input
110-120V:1800W, 220-240V:2200W
Voltage
110-120V~ 50-60Hz, 220-240V~ 50-60Hz
No load min-1
Speed 1
400-850
Speed 2
750-1640
Speed 3
1550-3450
Capacity
Hand-Held 150mm (6")
Rig-Mounted
200mm (8")
Arbor Thread
Male: 1-1/4" - 7 UNC and Female: 1/2" BSP
Neck Diameter
60mm
Dimensions
552mm x 110mm x 150mm
Soft start & Overload protection
with
Net weight
6.0 kgs ( 13.2 Lbs )
Leveling accuracy
Self-leveling range
Measuring range
Spinning speed
Directional-scanning
Setting slope
Light source
Down point
Remote controlling Distanc
Power Supply
Working Temperature
Water-proof
Dimension
Weight
EV160
Power input
Voltage
No Load min-1
N-m (Low Gear / High Gear)
Number of Gears
Amps (110V)
Amps (230V)
Thread For Fixing The Tool
Mixing Paddle (Max.)
Electronic Speed Control
Net Weight
www.disc.ie
Horizontal: ±15/ Vertical: ±20
±5°
Diameter: 500m (Using the laser detector)
0,60,120,300,600 r.p.m
0°, 10°, 45°, 90°,180°
±5° (Dual axis)
Laser Diode, wavelength 635nm
Accuracy:±1mm/1.5
Approximately 20m
DC 4.8-6V (NI-MH rechargeable)
-10~+45 (14°F~113°F)
IP-54
160(L)x160(W)x185(H)mm
2kgs
EV52
1600 W
1300 W
110-120V~ 50-60Hz, 220-240V~ 50-60Hz
180-350 / 280-550
150-400 / 250-700
42.7 / 29.9
27.4 / 17.3
2
2
14.50
10.90
7.00
5.20
M14 x P2.0
M14 x P2.0
160mm (6-5/16 in.)
140mm (5-1/2 in.)
√
√
5.6 kgs (12.3Lbs)
4.1kgs (9Lbs)
65
POWER TOOLS
RYOBI POWER TOOLS
HAMMER DRILL/DRIVERS
LLCDI18022
COMBI DRILL 18V
EID11002RV
HAMMER DRILL 220V
No load speed 1
No load speed 2
Blows per minute 1
Blows per minute 2
Drilling diameter in wood
Drilling diameter in metal
Drilling diameter in masonary
Weight
66
EID1050RS
HAMMER DRILL 220V
LCDI18022L
EID11002RV
EID1050RS
0 - 400 rpm
0 - 1500 rpm
0 - 5720 bpm
0 - 19500 bpm
38 mm
13 mm
13 mm
2,1 kg
0 - 1200 rpm
0 - 3200 rpm
0 - 19000 bpm
0 - 51000 bpm
50 mm
13 mm
20 mm
3,9 kg
0 - 3200 rpm
www.disc.ie
0 - 51000 bpm
32 mm
13 mm
20 mm
2,86 kg
POWER TOOLS
RYOBI POWER TOOLS
BATTERIES
RB18L15
BATTERY
BLK18152
BATTERY & CHARGER PACK
18V 1.5Ah Lithium+ Battery
18V 1.5Ah Lithium+ Battery
Powerful 1.5Ah Lithium+ battery delivers up
to 10% more performance and up to 35%
more run-time
Fuel gauge displays remaining battery
charge so user can manage their workload
Intellicell technology monitors and balances
individual cells to maximise run-times,
storage life and safety
Tough pack design with built in impact
protection for long term durability
more run-time
Voltage
Capacity
Voltage
Capacity
18 V
1.4 Ah
18 V
1,5 Ah
RBC18LL15 / RBC18LL40
BATTERY & CHARGER PACK
RBC18LL15
18V 1.5Ah Lithium+ Battery x 2
and Charger Kit
RB18L40
BATTERY
18V 4Ah Lithium+ Battery
more run-time
Voltage
Capacity
18 V
4,0 Ah
www.disc.ie
more runtime
Voltage
18 V
Capacity
1.5 Ah
RBC18LL40
18V 4Ah Lithium+ Battery x 2
and Charger Kit
more run-time
Voltage
18 V
Capacity
4.0 Ah
67
POWER WASHERS
ELECTRIC POWER WASHERS
68
KL1300
KSM1480 GOLD
KS1600 CLASSIC
KS1600 EXTRA
KA2800
KE CLASSIC HOT
MAKE
MODEL
PRESSURE
VOLUME L/MIN
POWER KW
WEIGHT
COMET
COMET
COMET
COMET
COMET
COMET
KL1300
KSM1480 GOLD
KS1600 CLASSIC
KS1600 EXTRA
KA2800
KE CLASSIC HOT
130 BAR
150
145
145
140
120
6
8
8.5
8.5
9
10
1.7
2.3
2.4
2.4
2.6
3
12
17
17
19
36
114
www.disc.ie
POWER WASHERS
PETROL / DIESEL POWER WASHERS
LONCIN 6.5HP 2000PSI
GEARBOX DRIVEN POWER WASHER
Max Pressure
Frame
Water Flow
Pump
Water Supply
Weight
LONCIN 9HP 2700PSI
2000psi
Heavy Duty With Folding Handle
12.6 L/Min
Triplex Long Life Pump
With Reduction Gearbox
Self Sucking With Filte
50kg
CHANGFA DIESEL 3000PSI
LONCIN 6.5HP 2800PSI
DIRECT DRIVE POWER WASHER
ENGINE
PUMP
PRESSURE PSI
VOLUME L/MIN
POWER HP
LONCIN PETROL
LONCIN PETROL
LONCIN PETROL
CHANGFA DIESEL
OEM
OEM
OEM
OEM
2800
2000
2700
3000
11
12.6
15
15
6.5
6.5
9
10
www.disc.ie
69
POWER WASHERS
PETROL / DIESEL POWER WASHERS
2200 Psi 14Lpm Comet
Unloader valve fitted with external by pass
2mm tubular frame in low profile style frame
Powder coated
Rubber tyres solid inner hub 250mmx25mm axle
Lance & 9metre 2 wire hose as std
Water & chemical pick up hose c/w filter
COMET 2200PSI
(AVAILABLE WITH HONDA OR LONCIN ENGINE)
COMET 3000PSI
DIESEL GEARBOX DRIVEN POWER WASHER
COMET 3000PSI
PETROL GEARBOX DRIVEN POWER WASHER
(AVAILABLE WITH CHANGFA OR YANMAR ENGINE)
(AVAILABLE WITH HONDA OR LONCIN ENGINE)
Yanmar L100 10HP Diesel Engine
3000 Psi 15Lpm Interpump
2mm tubular frame in Trolley style frame powder coated
4 Rubber mounts angled @ 45º and 2 rubber feet
Water & chemical pick up hose complete with filter
COMET 340 HT
COMET 390 HT
COMET 100 CYTE
70
Honda Gx390 oil alert as standard
3000 Psi 21Lpm Comet pump
2mm tubular frame in Trolley style frame powder coated
1 Rubber mount
Water & chemical pick up hose complete with filter
ENGINE
PUMP
PRESSURE PSI
VOLUME L/MIN
POWER HP
LONCIN PETROL
LONCIN PETROL
HONDA PETROL
HONDA PETROL
HONDA PETROL
YANMAR DIESEL
COMET
COMET
COMET
COMET
COMET
COMET
2200
3000
2200
3000
3000
3000
14
15
14
15
21
15
6.5HP
13.0HP
6.5HP
13
13
10
www.disc.ie
POWER WASHERS
POWER WASHER ACCESSORIES & PARTS
POWER WASHER TRIGGER
POWER WASHER STEM
POWER WASHER NOZZLE HOLDER
POWER WASHER NOZZLE
HEAVY DUTY UNLOADER VALVE
QUICK RELEASE COUPLING
QUICK RELEASE TAIL
CHEMICAL EJECTOR
SEWER CLEANING NOZZLE
PROFESSIONAL TURBO NOZZLE
SUCTION FILTER 1/2"-3/4“
9MTR HOSE 330BAR
www.disc.ie
71
SITE LIGHTING & ELECTRICAL ACCESSORIES
INDUSTRIAL QUALITY CABLE REELS
110 VOLT LEAD
Industrial quality110 volt cable reel
2 x 16 amp outlets
3 x 2.5mm cable
25 meter long
220 VOLT LEAD
SOLAR POWERED FLASHING
LIGHT
Industrial quality 220 volt cable reel
2 x 13 amp outlets
3 x 1.5mm cable
25 meter long
Solar Panel: .5 W, mono-crystalline silicon;
Battery: Including two pcs of rechargeable
batteries, high quality ones;
Viewing Distance: Over 1000m (Approx.3300
ft.), High optics vision.
Charging: 8-hour charging=5 nights
working, a full charge= upto 90 hours
operation.
Operating Time: Automatically operate from
dawn to dusk
3.3KVA SITE TRANSFORMER
POWER TOOL REPAIR CABLE
H07RNF 2 CORE OR 3 CORE
LOW POWER SITE LIGHT
144 Watt & 220 Watt Low Power Site Lamps
Professional Work Light
Low Radiated Heat
Compact Flourescent Tube
High Imnpact Resistant Casing
Luminance 8250lm
IP54
Cover Transparent PC; Body-PP
Product Size: 49 x 33 x 12.5cm
Different Voltages Available
YELLOW 110 VOLT
HEAVY DUTY ARTIC CABLE
72
BLUE 220 VOLT
HEAVY DUTY ARTIC CABLE
www.disc.ie
TWIST 16AMP 110V PLUG
0R SOCKET
TRAFFIC SIGNALS
DIABOLO PORTABLE TRAFFIC LIGHTS
Main light body made from light
polypropelene
Battery box made from orange
polypropolene
long term proven electronic reliability
wide angle high intensity 210mm light
segment display for each colour
Telescopic post
Ergonomic head makes for ease of handling
Weight only 70kg without battery for a set.
Up to 5 weeks on a single battery charge
depending on batteries
• Light sign made from black polypropylene
• Long time proven electronics
• Long time, wide-angle, high-intensity LED
210mm light clusters (service life of
100,000h)
• Telescopic post
• Ergonomic light head makes it easy to
handle
• Weight: 70kg
Recommended power supply:
2 batteries, 12v 200Ah
or 4 batteries 6v 192Ah
or Main connection via 2 power supply
regulators 230/12 volts
DIABOLO R2 RADAR ACTIVATED
PORTABLE TRAFFIC LIGHTS
• LED technology
• Radar detection for full automatical
regulation of green times
• Long time proven electronics
• Long time, wide-angle, high-intensity LED
210mm light clusters (service life of
100,000h)
• Telescopic post
• Ergonomic light head makes it easy to
handle
• Weight: 70kg
Recommended power supply:
2 batteries, 12v 200Ah
or 4 batteries 6v 192Ah
or Main connection via 2 power supply
regulators 230/12 volts
www.disc.ie
73
WATER PUMPS
ELECTRIC WATER PUMPS
SHOWFOU SC 110V AND 220V
2” SUBMERSIBLE WATER PUMP
SHOWFOU SCA0511 110V AND
220V AUTOMATIC 2”
SUBMERSIBLE WATER PUMP
SHOWFOU SC 110V AND 220V
TSURUMI HS2-4 110V AND 220V
TSURUMI LB480 110V AND
220V 2” SUBMERSIBLE WATER
PUMP
TSURUMI HS3-75 110V
3”SUBMERSIBLE WATER PUMPS
TSURUMI LC1.4S 110V
SUBMERSIBLE PUDDLE PUMP
74
CAMLOCK HOSE KIT & FITTINGS
www.disc.ie
WATER PUMPS
PETROL WATER PUMPS
LONCIN
1 INCH WATER PUMP: LC25ZB21-1.2Q
LONCIN
2 INCH WATER PUMP: LC50ZB23-3.1QA
• Adopting Loncin’s easy-to-start, reliable and
durable OHV LC152F engine
• The pump body is made of light-weight but
strong aluminum alloy.
• Cast iron volute and impeller
• Adopting high-quality ceramic mechanical
sealing, very crucial to water pump
• Low engine oil protection device
• Max. pump lift of 21m, Max. suction of 6m
• Delivery volume: 8m3/HC
• Dims: 41x30x37
• Weight: 15kg
LONCIN
3- INCH SEWAGE PUMP：LC80WB30-4.5Q
• Adopting Loncin’s easy-to-start, reliable and durable
OHV G200F engine
• Pump body is made of light-weight but strong
aluminum alloy.
• Frame-type strong pump support
• Light-weight anti-corrosion aluminum alloy and
double-impeller aluminum structure
• Adopting high-quality ceramic mechanical sealing,
very crucial to the water pump
• Max. Pump lift of 30m, Max. Suction of 6m
• Max flow capacity reaches 45 m3 /hou
• Delivery volume: 45
• Dims: 59x48x44
• Weight: 36kg
durable OHV G160F engine
• Wearable cast iron volute and impeller
• Dims: 55x43x39
• Weight: 26kg
LONCIN
• Dims: 63x52x55
• Weight: 47kg
www.disc.ie
LONCIN
• Dims: 55x43x46
• Weight: 30kg
2 INCH WATER PUMP: HONDA WB20
Suction x Delivery Diameters: 2x2 in. (50.8x50.8 mm)
Total Head: 26 m
Maximum Delivery Volume: 600L/min
Suction Head: 8 m
Engine Specification:
Engine HP: 4.0
Type: GX 120 Air-cooled, 4-stroke
Oil Alert: Yes
Fuel: Petrol Unleaded
Fuel Tank Capacity: 2.5 ltrs
Starting System: Recoil Starter
Dimensions (LxWxH) mm: 470 x 350 x 380
Weight : 22 kg
75
WELDING EQUIPMENT
MMA168 INVERTER STICK WELDER
100% DUTY CYCLE AT 150 AMPS
Input Voltage / Frequency
Rated input current(A)
No-load voltage(V)
Output current(A)
Rate output voltage(V)
Duty cycle(%)
Efficency(%)
Power factor
Insulation grade
Weight(KG)
Rod Size
Dimensions (mm)
MMA168 DC
MMA200S
220V±10% 1Ph
50/60HZ
30
56
20 - 150
27
100% at 150 amps
85
0.93
F
3.6
2 - 4.0
270x112x185
220V±10% 1Ph
50/60HZ
79
10 - 200
28
60% at 200A
85
8
2 - 4.0
371x153x232
SW200AC
SW200DC
Model
SW200AC
SW200DC
OUTPUT:
200 AMP / Welding Duty: 60% @170A
Maximum Rod Size 4.0mm /
230V 6.5kVA / 115V 2x2.5kVA(5.0kVA)
HONDA GX390
13.0/1
Recoil start
6.5 litres
L690x W480 x H540mm
81kg
200 AMP / Welding Duty: 60% @170A /
Maximum Rod Size 4.0mm
230V 4.0kVA / 115V 2.0kVA
HONDA GX390
13.0/1
Recoil Start
6.5 litres
L815x W480 x H620mm
86kg
ENGINE:
HP/CYLINDERS:
START:
FUEL TANK:
RUN TIME:
NOISE LEVEL:
SIZE:
WEIGHT:
76
MMA200S DC INVERTER STICK WELDER
60% DUTY CYCLE AT 200AMPS)
www.disc.ie

Brochure

Transcription

Similar documents

Wire Baskets-Kitchen Accessories

Transformador

PDF Catalogue - Midland Power

2015 List of Registered Business Establishment

Product Catalogue

Kesärenkaat 2016

prodeco - ABC

SALE! The Woodie`s