Electrical - Rollies Speed Shop

Transcription

5
Electrical
ELECTRICAL
Dealers opportunity for full service on all
sorts of fuel injected H-D & Buell models!
Direct Support by Manufacturer
for all End Users!
5
653745,
653746
653747
Diag4Bike Serial Diagnostic System
Professional diagnostic tool for Harley-Davidson & Buell workshops and tuning centers. Diagnoses electronic fuel injection module (EFI) and
others (Security modules, ABS, etc.) through the diagnostic connector. The kit contains a communication interface with Harley-Davidson adapter,
USB cable for connection to your Laptop (PC) and software compatible with Windows XP with SP3, Vista, 7 and 8. A wireless Bluetooth version of
the interface is also available. An adapter for CAN-BUS models is included. The system performs the following functions and more.
• Global test - searches for and identifies all embedded control units and reads trouble code memory + generates and prints a diagnostic report
• Ignition module diagnostics
• EFI (Electronic Fuel Injection Module) diagnostics
• TSSM diagnostics (Turn Signal Security Module)..............Key FOB with button
• HFSM diagnostics (Hands Free Security Module).............Key FOB without button
• Gauge (Speedo, Tach and Instrument Module) diagnostics
• ABS Module readout
• ABS Bleeding
619082
• Radio diagnostics
• Thunder MAX EFI compatible
• Read and Clear Diagnostic Trouble Codes......................All modules
• Read Identification data (parts number, VIN number)......All modules
• Monitoring real-time data and data logging (throttle position, temperature, oxygen sensors, turn signals etc.)
• New diagnostic functions in preparation: Buell TPS, radio speaker configuration, ABS bleeding on CAN-BUS models, engine management
tuning - fuel map modification. • Test actuators (injectors, coils, main relay, fuel pump, idle, turn signals, tachometer, lamps etc.)
• Idle speed adjustment 800 - 1200 rpm (models with Delphi Electronic Fuel Injection Module)
• TSSM configuration......PIN read/change, Auto arming disable/enable etc.
• HFSM configuration......Key FOB assignment/replacement, Auto arming disable/enable, PIN read/change
653745 USB serial interface (including Hardcase as shown) �� $379.00
653746 USB & Blue Tooth serial interface (including Hardcase as shown)�� $440.00
653747 Diagnostic Software, 4/6-Pin adapter included (6-Pin CanBus) �� $730.99
619082 Disarming cable for CAN models�� $55.99
Note: Latest version of software will be installed upon installation and product registration. Version 14.0 includes all models up to 2014 and all software updates for 2014 models are included
in the price of the software. Product is constantly under development. Information about improvements and added features are regularly presented for download on the product web page by
manufacturer www.diag4bike.eu in several languages!
5.02
*Prices shown are suggested retail prices only. Actual retail prices are determined by each dealer and may vary.
All parts are sold each unless otherwise noted. Retail prices may reflect an each quantity.
Please see Cautionary Information in back of catalog.
ELECTRICAL
Dealers opportunity for full service on all
sorts of fuel injected H-D & Buell models!
653749
APPAREL
SEATS &
BAGS
FOOT
CONTROLS
619080
653752
HAND
CONTROLS
LIGHTING
ELECTRICAL
EXHAUST
619081
653759
653750
INTAKE
Diag4Bike Parallel Diagnostic Systems
Professional diagnostic tool for Harley-Davidson & Buell workshops and tuning
centers. Parallel diagnostics is designed for measuring input and output
signals from the electronic fuel injection module (EFI) and other modules.
Measurements can also be made on running engines. The system consists
of a set of adapter cables and a breakout box. The breakout box is inserted
between the EFI module and the motorcycle’s wiring harness so that the system
continues to function as normal. Monitoring points for all connector pins of the
EFI module are clearly arranged on the breakout box. It is possible to measure
signals and waveforms from all systems and actuators. Disconnecting the ECU
from the breakout box allows quick and reliable check of the integrity of the
wiring harness in respect to continuity, and leakage currents.
653749 Breakout Box 62 Pin��$217.00
619080 36/48-Pin adapter harness for 12-14 FXST/FXD models ��$367.99
619081 18/18-Pin adapter harness for BCM on CAN equipped models ��$416.99
653750 36-Pin adapter harness for Delphi EFI models ��$280.00
653751 73-Pin adapter harness for Touring EFI models 08-11 (not shown)��$559.99
653752 35-Pin adapter harness for Magneti Marelli EFI��$233.00
653759 Universal connector kit includes common adapters (73 connectors) for
non destructive diagnostic operations on the wiring harness��$339.00
ENGINE
GASKETS
TRANSMISSION
& CLUTCH
DRIVELINE
WHEELS
TIRES &
BRAKES
CHASSIS
Diag4Bike Module
Voltmeter
Diag4Bike T-Adaptor
This T-adaptor is dedicated for connection to HarleyDavidson TSM, TSSM, HFSM - DELPHI when using the
breakout box.
619272T-Adaptor �� $302.99
The Module Voltmeter
is an optional accessory
for the Diag4Bike
communication interface
and breakout box. It’s a 2
channelgraphic voltmeter
which can be used for
independent voltage
measurement in a range
from 0 V to + 30 V. It can be used also like a new external parameter in the
serial diagnostics. (Interface shown for reference only)
619213 Module voltmeter��$145.99
SHEETMETAL
INSTRUMENTS
& GAUGES
GENERAL
CROSS
REFERENCE
w w w.cu sto m c h ro m e.co m
5.03
ELECTRICAL
Dealers opportunity for full service
on all kinds of fuel injected H-D &
Buell models!
619084
619083
5
Professional Tuning Tool for Workshops & Tuning
Centers
TUNING COMPONENTS: REQUIRES DIAG4BIKE
SOFTWARE AND INTERFACE PAGE 5.02
ENGINE TUNING Harley-Davidson
TUNING STRATEGY
• The tuning system focuses on Harley-Davidson engines equipped
with DELPHI EFI (diagnostic communication J1850 or CAN)
• The tuning system is based on diagnostic system DIAG4BIKE.
DIAG4BIKE is a professional diagnostic tool for Harley-Davidson
Motorcycles, the basic tuning software DIAG4TUNE will be
included as a free option in the diagnostic software Version 13
and up. To tune an individual motorcycle a TUNING DONGLE must
be purchased that can be used for that specific motorcycle.
• The tuning process does not require the installation of additional
component(s) or any motorcycle harness modification. Tuning
is based on the modification of EFI Calibrations (software
modification) exclusively via the diagnostic connector.
• The first step in Tuning is saving of the original EFI Calibration.
The tuning operator can restore the original EFI Calibration at any
time during the tuning process (stock calibration).
• The tuning process is used to optimize Fuel Maps in case of
any changes to the configuration of the engine components or
accessories(exhaust or/and intake system etc.)
AFR TUNING MONITOR 619084
The AFR Tuning Monitor is optional but required in order to use the
advanced Tuning level and consists of two Wideband Air/Fuel Ratio
Sensors and a compact electronic unit.
TUNING DONGLE 619083
The key function of the Tuning Dongle is saving of the original EFI
calibration. Thanks to this function the original calibration can be
restored at any time. The tuning dongle also incorporates the tuning
license exclusively for one motorcycle and must be purchased for
tuning of each individual motorcycle and will be mated to the ECM of
that motorcycle.
619083 Tuning dongle (for one motorcycle)�� $332.99
619084 AFR tuning monitor �� $421.99
3 LEVELS OF TUNING
1.
Easy Manual Tuning (Adjusting). The tuning system provides the
ability to adjust Air/Fuel Ratio (AFR) and Ignition Advance Maps
manually in a limited range of +/- 20% (limit is adjustable).
2.
Advanced Tuning
a.
b.
3.
5.04
Based on new VE (Volume Efficiency) Map measured by
using an AFR Tuning Monitor and then adjusting the AFR
Map
VE Map measuring can be done
I.
On a Free Roller Station (heavy roller)
II.
On a Roller Station (dynometer)
III.
During Road Test
Downloading a Map (Calibration) and Flashing the ECM. A
database for typical calibrations related to dedicated motorcycle
models, exhaust and intake components will be consistantly
developed and available through software updates.
ELECTRICAL
Daytona Twin Tec Programmable Ignition Modules
Special features:
• More power with dyno tuning – optimized built-in advance curves
and easy programming of custom curves
• Full support of the new J1850 data bus used for communications
with instrument cluster and turn signal/security module (TSM/
TSSM)
• Compatible with H-D scan tools, also allows recalibration of
speedometer/odometer to accommodate tire and gear changes
• Built-in data logging for last 30 minutes of engine operation
(engine builders will find this highly useful for tuning, diagnosing
problems, and reducing unjustified warranty claims)
• Free demo software available for download on Daytona Twin Tec
web site and custom advance curves (must use USB interface cable)
• Fits carbureted Twin Cam 88 and Sportster models with 12-pin
connector from 04-06
640281 Programmable module ONLY (T/C 04-06, XL with 12 pin)
APPAREL
SEATS &
BAGS
FOOT
CONTROLS
640281
HAND
CONTROLS
��$319.99
672476
031005
672475
50 State street legal version of 640281 for carbureted Twin
Cams from 04-06 (E.O. number D-641-1)��$319.99
Fits carbureted Twin Cam 88 models from 99-03��$319.99
50 State street legal version of 031005 for 99-03 carbureted
Twin Cams 99-03 (E.O. number D-641-1��$319.99
LIGHTING
ELECTRICAL
031005
EXHAUST
INTAKE
ENGINE
GASKETS
TRANSMISSION
& CLUTCH
031003
DRIVELINE
Daytona Twin Tec Fully Programmable Ignition
Systems
VT-I Electronic Ignition System by Daytona Twin Tec
Dual fire electronic ignition. Designed for all Harley V-Twins except
early magneto style and 99 and later Twin Cam models. Includes
trigger rotor for use with mechanical points. Built in adjustable RPM
limiter (5200-7000 RPM). Status LED for easy static timing. Electronic
dwell control for maximum ignition energy at high RPM and reduced
current draw at low RPM. Easy installation, simple two wire hookup.
672536 VT-I Ignition��$141.99
These ignitions are an upgrade from the non-adjustable stock
OEM unit, and feature advanced electronics set into a machined
billet aluminum housing. Rotary switches are used to set the
operating modes (such as single or dual fire), adjust the timing
advance, and select the RPM limit. Two diagnostic LEDs indicate
the status and the state of the vacuum switch (VOES). The status
LED is also used to indicate top dead center (TDC) for easy timing
set-up. A special feature allows use of the tachometer wire for
a link to a laptop PC. Windows compatible software is freely
available for download at the company website. For kickstart
enthusiasts we have also included a kickstart mode.
031003 Fits most models from 70-99 (except Sportster models from
98-10 and Twin Cam 88 engines) using stock electronic
ignition trigger rotor (not included)��$289.99
672465 50 State Street legal version of 031003 for 84-99 Big Twins
(E.O. number D-641-1)��$289.99
672466 50 State Street legal version of 672492 for 98-03 Sportster
models (E.O. number D-641-1) �� $319.99
Note: Sportster models from 71-82 and Big Twins from 70-83 require that mechanical
advance units and point ignitions, or early electronic ignitions and rotors be replaced
by an OEM 32402-83 ignition timing rotor (CC #59725).
5.05
WHEELS
TIRES &
BRAKES
CHASSIS
SHEETMETAL
INSTRUMENTS
& GAUGES
GENERAL
CROSS
REFERENCE
ELECTRICAL
Daytona Twin Tec USB Interface
Provides USB connectivity for all Daytona Twin Tec engine controls.
Includes 6 foot USB cable and Windows 98/ME/XP drivers on CDROM.
Not compatible with Twin Tec’s scan tool CC #672529 and WEGO II CC
#672521.
672518 6 foot USB interface cable and Windows/ME/XP/Vista drivers
on CD ROM ��$87.99
5
Daytona Twin Tec Ignition Kit for Twin Cam 88
Models
Kit includes the programmable ignition module (CCI #031005),
Twin Tec ignition coil, and Universal Wire Set. The Twin Tec ignition
coil has low resistance primary windings and is compatible with all
OEM, Screamin’ Eagle, and aftermarket ignition systems intended
for carbureted Twin Cam 88 models. Fits all carbureted Twin Cam 88
models from 99-03.
672473 50 State street legal version of 640280 (E.O. number D-641-1)
��$424.99
672518
6 foot USB interface cable and Windows/ME/XP/Vista drivers on
CD ROM��$87.99
Daytona Twin Tec Ignition Kit for Twin Cam 88
Models
Kit includes the programmable ignition module, Twin Tec ignition
coil, and Universal Wire Set. The Twin Tec ignition coil has low
resistance primary windings and is compatible with all OEM,
Screamin’ Eagle, and aftermarket ignition systems intended for
carbureted Twin Cam models. Fits all carbureted Twin Cam 88 models
from 04-06. ARB compliant, O.E. Number D-641-1
672474 50 State legal ignition kit for Twin Cam models ��$485.99
Daytona Twin Tec Nose Cone Ignition Kit
Replaces the Original Equipment ignition system, and mounts in the
gear case cover using the standard H-D timing rotor (not included).
Ignition offers adjustable advance, adjustable RPM limit settings
in 100 RPM increments, and switch selectable single or dual fire
modes. Single fire mode improves starting, reduces the occurrence
of backfiring at low RPM, and improves power at high RPM.
Red LED flashes when the engine reaches top dead center (TDC)
permitting easy static timing. The status LED also provides diagnostic
information. A green VOES LED illuminates when the VOES (vacuum
switch) input is active. A special feature allows use of the tachometer
wire for an RS-232 link to a laptop computer when the engine is not
running. Individual units can be programmed with a custom advance
curve and other engine parameters such as rear cylinder timing
offset. The use of the tachometer wire for the PC link eliminates the
need to remove the outer cover plate. Kit includes Single Fire ignition
coil, 8.5 mm universal plug wire set, and a nose cone ignition.
672528 Fits all Big Twin models from 70-99 and Sportster models from
71-97 insert ��$399.99
672469 50 State street legal ignition kit for 84-99 Big Twins (E.O.
number D-641-1 & D-641-2) ��$399.99
672470 50 State street legal ignition kit for 98-03 Sportsters (E.O.
number D-641-1)��$424.99
5.06
672467
672471
Daytona Twin Tec External Plug in Ignition Kits
Wide timing advance adjustment range accommodates stock to
highly modified engines. Digitally set RPM limit (100 RPM steps).
Selectable single or dual fire mode as well as selectable multi-spark
mode for quick starting and smooth cruise. Coil outputs protected
against short circuits with optional USB interface and software for
programming custom advance curve. Billet aluminum housing with
black anodized finish and easy plug-in installation. ARB compliant
(E.O. number D-641-1), complete with coil and plug wires
672471 Fits all 90-94 Big Twins and 90-93 XL 883 with 7 pin connector
��$424.99
672467
672472
672468
Module only ��$319.99
Fits all 94-99 Big Twins with 8 pin connector ��$424.99
Module only��$319.99
ELECTRICAL
APPAREL
SEATS &
BAGS
FOOT
CONTROLS
HAND
CONTROLS
LIGHTING
Compu-Fire ‘Elite 1’ Digital Electronic Ignitions
All circuits are contained on the timing plate. There’s no module or
anything else to mount! The HDE-1 and HDE-2 have fixed advance
curves and 6500 RPM rev-limiters to protect the engine. Model
HDE-3 has eight advance curves and an eight-stage rev-limiter
adjustable from 6000 to 7500 RPM or off. All models have the AccuRay timing LED for precise timing and system check. They work with
the factory VOES switch (HDE-3 offers dual-range operation). Fit
all carbureted Big Twins from 70-99 (except Twin Cam models) and
Sportster models from 71-03.
17174
HDE-1 dual fire. Will not work on kicker models. �� $183.99
17175
HDE-2 single fire�� $183.99
17176
HDE-3 single or dual fire�� $275.99
Compu-Fire Ignition System for High
Compression Motors
Eliminate pinging and misfire in high compression and large
displacement engines. Advance curves range from fairly steep
for near stock to more gradual for high-horsepower engines. All
ignition circuits are contained in the nose cone and there is an
‘Accu-Ray’ static timing LED. Single or dual fire operation is switchselected, and dual sensor circuits eliminate hard starts and give
accurate spark timing even at high RPM. Eight advance curves,
adjustable rev-limiter (6,000 to 7,500 rpm) and two VOES modes.
17178
Fits all carbureted Big Twins from 70-99 (except Twin Cam
models) and Sportster models 71-03��$275.99
23231
Similar to CC #17178 but designed for kick start models
ELECTRICAL
EXHAUST
INTAKE
��$275.99
ENGINE
GASKETS
TRANSMISSION
& CLUTCH
DRIVELINE
WHEELS
TIRES &
BRAKES
CHASSIS
Accel Single/Dual Fire Ignition
Compu-Fire Electronic Ignitions
This ignition unit works with both single or dual fire coils,
eliminating the need to buy a new ignition when you change coils.
Hours of dyno testing went into creating this ignition so that it is
simple to use and delivers the premium performance you expect
from Accel. It has 14 preset ignition curves to cover a stock engine
through exhaust and intake changes to a full blown big inch, high
compression motor. Other features include an easily selectable rev
limiter and L.E.D. timing light for quick static timing. The harness
has a V.O.E.S. input, tachometer output and is externally grounded
for better reliability, and the housing is machined out of aluminum
for better heat dissipation.
668013 Fits Big Twins from 71-99 (except Twin Cam 88 models) and
Sportster models from 83-03 ��$379.99
These digital ignitions use advanced Hall-Cell triggering and
surface mount technology with a convenient built-in ‘Accu-Ray’
static timing LED. They completely eliminate the rev-limiter and
have built-in adapters to correct the tachometer output. Fit nonEFI Evolution Big Twin models from 70-00 and Sportster models
from 71-03.
17170
Dual-Fire ignition system for single plug cylinder heads
��$117.99
17171
SHEETMETAL
INSTRUMENTS
& GAUGES
Single-Fire ignition system for single plug cylinder heads
��$138.99
Note: 80-10 models fitted with Original Equipment electronic ignition systems will
require the additional purchase of a mechanical advance unit.
GENERAL
CROSS
REFERENCE
5.07
ELECTRICAL
630103
630101
5
630102
Dyna ‘S’ Ignition Systems
Systems use magnetic rotors with Original Equipment
spark advance mechanisms to retain the factory advance
curves and replace points and condensers with a highperformance dual or single-fire system. Dyna ‘S’ ignitions
change timing less than 3° from 0-8,000 RPM and feature
improved performance, easy installation and a 3-year
factory warranty. Dyna recommends using 5.0 ohm coils
on Dynas’ dual and single fire ignitions. Completely selfcontained, and install behind points cover. Big Twins -99,
XL -03.
Note: For proper results, matching high-performance coils must be installed
in conjunction with the CC #’s 12302 and 12369 single fire kits.
Complete Ignition Kits with Dyna Coils
Complete solution with Dyna S ignitions, Dyna highperformance coils, wiring and detailed instructions.
12097
Dyna ‘S’ single fire kit��$279.95
12098
Dyna ‘S’ dual fire kit��$194.99
Kits without Advance Unit Assembly
Fit Sportster models from 71-79 and Big Twins from 70-79
using OEM advance unit.
12319
High-performance dual fire system (MFG #DS6-1)
��$124.49
12302
Single-fire ignition system (MFG #DS6-2)��$151.99
Ignition Kits with Advance Unit Assembly
We’ve added our ‘Premium’ advance unit assembly to the
Dyna ‘S’. Fits Sportster and most Big Twin models from
70-03 (except Twin Cam 88 models).
12368
High-performance dual fire system��$152.99
12369
Single-fire ignition system to be used with 5.0
ohm coil. ��$169.99
5.08
Dynatek 2000iP Programmable Ignition Systems
Dynatek has upgraded their popular 2000i ignitions to be fully programmable
when used with the optional programming kit (see below).
• Completely self-contained under the cam cover for a clean look
• Heavy-duty billet aluminum construction for long life
• Single fire operation down to zero rpm for easier cranking and kicking
• Operates all combinations of single fire or dual fire with single plug or dual
plug heads (when used with appropriate coils)
• Eight advance curves to cover a broad range of engine configurations and
riding styles
• Engine over-rev protection adjustable from 6.000 to 7.500 rpm
• Adjustable timing retard for nitrous and turbo applications
• VOES indicator tells you at a glance, the status of the VOES switch
• Built-in tach driver can be used to activate shift lights and auto-shifters
• Easy static timing with built-in timing indicator
• Intelligent over-current/short-circuit protection, active dwell control and overvoltage protected
• Fits Sportster models from 70-03 and all Big Twin models from 70-99 (except
Twin Cam 88 models)
630108 Dyna 2000i module ONLY ��$254.99
630101 Complete kit for single plug/single fire applications (includes one DC6-5
'Twin Fire II' 3 Ohm coil)��$399.99
630102 Complete kit for single plug/single fire applications (includes two DC3-1
single tower 3 Ohm coils) ��$399.99
630103 Complete kit for dual plug/single fire applications (includes two Dyna DC1-1
dual tower 3 Ohm coils)��$399.99
Optional Programming Kit for Dynatek 2000iP Ignitions
Adds full PC programmability and data recording to Dynatek 2000iP ignitions.
• 8 point fully definable wide open throttle curve, 8 point fully definable part
throttle curve
• Rev limit programmable in 50 RPM steps
• Programmable dead cranking revs 0-5, Programmable rear cylinder offset, total
of +/- 10°
• Programmable rev limiter
• Maximum RPM and Seconds near rev limit
• Total engine hours/time at wide open throttle
• Number of engine starts (two minutes running counts as one)
• Longest time operating at wide open throttle
630100 Programming kit��$99.99
ELECTRICAL
APPAREL
SEATS &
BAGS
FOOT
CONTROLS
Standard Motor Products Ignition Sensors
Mallory Unilite Breakerless Ignition
Permits an easy conversion from point ignition to the self contained
Unilite module which has no moving parts to wear out. Using
Mallory's time tested breakerless ignition circuit, combined with
modern surface mount Thermal Clad construction, the Mallory Unilite
can drive any ignition coil or combination of coils with a total primary
resistance of at least 2.0 Ohms. We recommend ignition coils with 2.0
to 3.0 Ohms for racing applications and 3.0 to 4.0 Ohms for street use.
Conversion is an easy three-wire connection.
26915
Complete kit for 70-99 Big Twins with point ignitions (except
Twin Cam) ��$165.99
Anyone who has ever told you that the stock electronic ignition
either works or it doesn’t, is WRONG! Thousands of dyno runs have
proven to us that your stock sensor can be operating at less than
100% efficiency without you ever knowing it.
609994 For Touring models from 80-93, Softail models from 84-85,
FXR and Sportster models from 80-94 (repl. OEM 32400-80A)
��$46.99
609995
609996
For Dyna Glide models from 91-95 (repl. OEM 32404-90)
HAND
CONTROLS
LIGHTING
��$46.99
For Touring models from 94-95, Sportster models from
95-97 and XL 1200S models from 98-03 (repl. OEM 3240094)��$46.99
ELECTRICAL
EXHAUST
Ignition Parts
Direct replacement for stock parts
59725
Ignition rotor for many models from 83-02 (except models
with fuel injection) replaces OEM 32402-83��$6.99
59726
Ignition rotor screw and washer replaces OEM 2611B. Pack
of 10. Price each. ��$0.60
Motor Factory Electronic Ignition
Fits all cone motors and easier to install than points. Single and dual
fire ignition with built-in timing light. Less dwell time promotes
longer coil life and a hot spark. Operates on 10-17 volts and draws
less than 1/2 amp. Front to rear timing is accurate to 1/2 degree. Can
be used with 3 or 5 Ohm coils. Requires use of automatic advance
unit such as CC# 632026. Made in USA.
632027 Electronic ignition. Fits Big Twin 71-99 and XL 71-03��$157.99
INTAKE
ENGINE
GASKETS
TRANSMISSION
& CLUTCH
DRIVELINE
WHEELS
TIRES &
BRAKES
CHASSIS
Dynatek 2000TC Digital Ignition for Twin Cam 88
Models with Carburetors
The popular 2000TC is now offered in a PC programmable version
in addition to the original version. Both ignitions feature 16
advance curve options in three groups, and 8 rev limiter settings in
increments of 250 rpm from 5.750-7.250 rpm. Compatible with stock
and aftermarket performance coils, using stock sensors and OEM
connectors, and the stock mounting. Also features advanced full
digital accuracy, monitored current to provide full spark energy at
all times and protection against electrical spikes and reverse polarity
problems. Fit all carbureted Twin Cam 88 models from 99-03.
630107 PC programmable ignition (Mfg #TC88-2P) ��$254.99
Optional Programming Kit for Dynatek TC88-2P Ignitions
Adds full PC programmability and data recording to Dynatek TC88-2P
ignitions. (CCI #630107)
• 8 point fully definable wide open throttle curve
• 8 point fully definable part throttle curve
• Rev limit programmable in 50 RPM steps
• Programmable dead cranking revs 0-5
• Programmable rear cylinder offset, total of +/- 10°
• Programmable rev limiter
• Total engine hours/time at wide open throttle
• Max RPM and seconds near rev-limit
• Number of engine starts (two minutes running counts as one)
• Longest time operating at wide open throttle
630099 Programming kit��$99.99
5.09
SHEETMETAL
INSTRUMENTS
& GAUGES
GENERAL
CROSS
REFERENCE
ELECTRICAL
Electronic Ignition Cam Cover
Conversion Kits for Twin Cam 88 Engines
by BDL
5
668236
Vulcan Engineering Twin Cam Ignition Conversion Kit and
Cover
CNC from 6061 billet aluminum and chrome plated Twin Cam ignition conversion
kit comes with a Evolution Style, self contained ignition system. Requires no
microprocessor, crank sensor, cam angle sensor, MAP sensor or BAS sensor. This kit
is the solution for bike builders using Twin Cam motors in custom bikes, and don’t
want to use the complex factory wire harness, and wants a simple solution for
ignition timing. Includes: Chrome cam cover, camshaft sprocket, single / dual fire
ignition system, auto advance, timing tool, stainless steel hardware and detailed
instruction sheets. Made in the USA.
668236 For chain drive cams. Fits Twin Cam Dyna Glide models 99-05, Softail and
Touring models 99-06.��$834.99
668237 For chain drive cams. Fits Twin Cam Dyna Glide models 06-14, Softail and
Touring models 07-14��$834.99
This kit converts all Twin Cam 88 engines to earlier
electronic ignitions, and can be used with any
aftermarket ignition and rotor cup system. It is great for
building customs with Twin Cam 88 engines to simplify
the wiring process. You can now wire your bike with all
aftermarket Evolution wire harnesses.
642501 Conversion kit for engines with gear drive cams
only ��$628.99
Motor Factory Distributors
These billet aluminum distributors are available to
fit 36-69 Big Twins or 57-70 Sportster models. Single
or dual fire electronic ignition with built-in timing
light, and can be used with 3 or 5 Ohm coils. Front to
rear cylinder is pre-timed and accurate to 1/2 degree.
Operates on 10-17 volts and draws less than 1/2 amp.
Sealed Hall Effect ignition is impervious to moisture
and vibration. Less coil dwell time promotes longer
coil life and a hot spark at any RPM. Same size as OEM
auto advance distributors and installs without cylinder
head removal. Features tool steel auto advance and all
components are made in USA.
632020 Fits Big Twin models from 36-69 ��$421.99
632021 Fits Sportster models from 57-70��$421.99
632022 Replacement module (use with CC #632020)
��$229.99
632023
632024
5.10
Distributor clamp for Big Twins (use with CC
#632020) ��$7.99
Distributor clamp for Sportster models (use with
CC #632021) ��$7.99
ELECTRICAL
APPAREL
SEATS &
BAGS
FOOT
CONTROLS
HAND
CONTROLS
Mallory All Electronic Ignition Distributor
All the features and benefits of an electronic Hall Effect ignition
packaged in a distributor for early model Big Twins and for the old
school customs. With electronic advance, rev limiting, and choice of
Single or Dual Fire for 12-volt systems. Detailed instructions included.
Installs without removing the cylinder heads.
668030 Fits Big Twins from 36-69��$529.99
Vulcan Engineering Auto Advance Parts
668144
668145
668146
668147
Auto advance weight set. (repl. OEM 32522-70). Sold in
pairs.��$32.99
Auto advance unit pivot pin set (repl. OEM 32629-70). Sold
in pairs.��$9.49
Auto advance spring set (repl. OEM 32605-70). Sold in pairs.
��$9.49
LIGHTING
ELECTRICAL
Auto advance timing bolt (repl. OEM 3570). Sold each. �$2.99
EXHAUST
INTAKE
ENGINE
Mallory Unilite Distributor
For faster, easier starting, Mallory’s 12-volt electronic ignition system
delivers performance and reliability at an affordable price. The
billet aluminum distributor utilizes the Unilite ignition module, and
a heavy-duty fully adjustable mechanical advance unit. Includes
detailed instructions and wiring harness.
26916
Fits Big Twins from 36-69 ��$429.99
GASKETS
Note: When using stock heads, no head removal is required
TRANSMISSION
& CLUTCH
Jammer Automatic Advance Unit
A high-quality advance unit that fits all cone motors. One-piece
base and shaft are machined from 4350 chrome moly tool steel,
and ground to .0001" accuracy. Pivot pins are tool steel and heat
treated to 58RC. Weights are machined from 4140 billet bar stock
and heat treated. This advance unit is one quality piece and made
to last a lifetime!
632026 Complete advance unit ��$95.99
DRIVELINE
WHEELS
TIRES &
BRAKES
CHASSIS
SHEETMETAL
Motor Factory Advance Unit with Blue Streak
Points and Condenser
Custom Chrome has combined it’s Premium advance unit assembly
with hi-performance Blue Streak points and condenser. This kit is
ideal for the replacement of worn out units or conversion to points
from the electronic ignitions used on many models from late 78-03.
These Blue Streak components are of the highest quality making this
one of the finest-quality point conversion kits on the market.
17193
Fits Big Twin models from 70-E78 and Sportster models from
71-E78��$59.99
INSTRUMENTS
& GAUGES
Ignition Wire Hold-Down
Chrome-plated die-cast hold-down secures the wire from the
electronic ignition to the nose cone on Evolution Big Twin motors
from 78-99. Sold each.
78103
Ignition Wire Hold-Down ��$4.99
5.11
GENERAL
CROSS
REFERENCE
ELECTRICAL
25447
25446
25445
25492
5
Accel Tune-Up Kits/Components
Standard Points and Condenser Kits
Kits comes with points and condenser.
17051
Fits all HD 48-69��$12.99
17052
Fits XL w/magneto 58-69��$18.99
17053
Fits all HD 70-E78��$13.99
The tune-up kits include matched point sets with a compact mylarinsulated condenser and a packet of point cam lube. Sold each.
Fits Sportster Models from 71-E78 and Big Twins from 70-E78
High-performance point set has a heavy-duty 32-oz. spring to resist
‘point bounce’ at high RPMs.
25490
Tune-up kit ��$28.99
25445
Point set (repl. OEM 32661-70)��$18.99
25446
High-performance point set��$19.99
Fits Sportster and K Models (except Magneto) from 54-70 and
Big Twins from 48-69
25491
25447
Condenser (repl. OEMs 32726-30A, 30801-47)��$13.99
Fits 58-69 Sportster Models with Magneto
25492
17191
17192
12334
Blue Streak High-Performance Points and
Condenser
These Blue Streak lubri-points feature heavy-duty construction,
lubriwick, oversize ventilated contacts and copper shunt. Available in
a kit or individually.
Point and Condenser Set
17190
Fits Sportster models from 71-E78 and all Big Twins from
70-E78 (repl. OEMs 32661-70, 32726-30, 30801-47)�� $22.99
Points Only
17191
Fits Sportster models from 71-E78 and Big Twins from 70-E78
(repl. OEM 32661-70) �� $15.99
Condenser Only
17192
Fits all Sportster and K models (except magneto) from 54-E78
and Big Twins from 30-E78 (repl. OEMs 32726-30A, 30801-47)
12333
Magneto Points and Condenser
High-quality American-made replacement points and condenser for
Sportster models with magneto ignitions from 58-69. Sold each.
12333
Point set (replaces OEM 29533-55A)��$12.99
12334
Condenser (replaces OEM 29534-55A)��$9.99
��$7.99
5.12
ELECTRICAL
APPAREL
SEATS &
BAGS
FOOT
CONTROLS
HAND
CONTROLS
RevTech Coils
RevTech High Performance EFI
Twin Cam Ignition Coil
This coil for fuel injected Twin Cams delivers
up to 30% more voltage than a stock coil.
Mounts in stock location.
668352 EFI Twin Cam coil. Replaces HD
31743-01 & 31696-07A. Sold each.
High-output, 80,000 volt coils that work with
3 Ohm electronic ignitions on most Big Twin
models from 80-99 and Sportster models
from 80-03. Available in single or dual fire
versions that fit under Original Equipment
coil covers.
28714
Dual fire��$68.99
28673
Single fire ��$112.99
��$119.99
Dual Fire Ignition Coils by
Blue Streak
LIGHTING
Blue Streak coils feature quicker rise times
and more spark energy than factory coils.
Durable designs and compact packaging
with vibration resistant housings provide
uncomplicated installations and long life.
17722
2.7 Ohm dual fire ignition coil
for Big Twins 80-99 (except Twin
Cam)�� $113.99
17723
4.6 Ohm dual fire ignition coil for
Big Twins 65-79 �� $107.99
ELECTRICAL
EXHAUST
INTAKE
ENGINE
GASKETS
TRANSMISSION
& CLUTCH
Twin Cam Ignition Coil by
Blue Streak
RevTech High-Performance
Ignition Coils
RevTech High Performance
12-Volt Coils
RevTech high-performance coils from
Custom Chrome feature spark voltages of
40,000 volts. That’s right – 40,000 volts which
makes these the highest output stock-style
coils on the market. They’re made in the
U.S.A. and available in two versions to fit
most Big Twin and Sportster models from
65-03.
59713
Fits Big Twin models from 84-99 and
Sportster models from 85-03 with
V-Fire III electronic ignitions (2.8
Ohm primary resistance) ��$76.99
59714
Fits all 12-volt models with pointtriggered or Prestolite electronic
ignitions from 65-79 (4.5 Ohm primary resistance)��$84.99
Designed for a stock replacement ignition
coil on 02-06 Touring, 01-05 Dynas, 00-06
Softails and 04-06 Sportsters. Carbureted
models only. Sold each.
668345 TC repl. ignition coil �� $105.99
These coils produce up to 30,000 volts of
spark energy to insure a clean fuel burn and
maximize ignition efficiency in all two- and
four-plug ignition systems. They may be
installed with the custom billet aluminum
brackets and covers contained elsewhere in
this section. The 12-volt coils were designed
mostly for dual point or dual electronic
pick-up ignitions more commonly referred
to as ‘single fire’ systems. Sold in pairs.
DRIVELINE
WHEELS
TIRES &
BRAKES
CHASSIS
SHEETMETAL
Note: Not recommended for use with Dyna ignitions.
Single Fire, Dual Plug Heads
59720
12-volt, 3.0 Ohm coils with dual
towers (pair)��$109.99
Single Fire, Single Plug Heads
59721
12-volt, 3.0 Ohm coils with single
towers (pair)��$109.99
INSTRUMENTS
& GAUGES
Single Fire Ignition Coil by
Blue Streak
High Quality coil for use with most single
fire applications (except Twin Cam). 3
Ohm primary resistance. Sold each.
668344 Single fire coil�� $106.99
5.13
GENERAL
CROSS
REFERENCE
ELECTRICAL
672493
5
Dynatek Ignition Coils
EFI Twin Cam Coil by Daytona
Twin Tec
Dynatek coils for Harley-Davidson applications
are high-quality American-made performance
coils designed to provide spark voltages
in excess of 30,000 volts and spark energy
second to none. Coils may be installed in
conjunction with Original Equipment V-Fire
III and compatible after-market electronic
and point-type ignition systems. Additional
brackets will be required for installation. Sold
in pairs.
09422
12-volt, 3.0 Ohm coils with single
towers (MFG #DC-3) ��$159.99
High output ignition coil for fuel injected
Twin Cam models from 00-06. Mounts in
stock location. Sold each.
672537 EFI Twin Cam coil��$106.99
672494
672477
Motor Factory Single Fire
Ignition Coil
• Single fire with dual coil output
specifications
• Fits in stock location
• 40,000 + volts output each side
• 3.0 Ohm primary resistance
• Brass primary and high voltage terminals
• Finned case for heat dissipation
Fits all Big Twin and Sportster models with
aftermarket single fire ignitions from 65-06
(except Twin Cam 88 and fuel-injected
Evolution models).
605051 Ignition coil��$109.99
5.14
High Output Coils by Daytona
Twin Tec
672493
3 Ohm primary, compatible with
all Twin Tec and most aftermarket
single fire ignitions. Fits Shovelhead
models 70-84, Sportster models
71-84 and Evolution Big Twin
models 84-99 (except those
equipped with fuel injection).
��$104.99
672494
672477
0.5 Ohm primary, fits 99-06 carbureted Twin Cam and Sportster 04-06.
Replaces OEM 31655-99 (WILL NOT
replace OEM 31639-99) ��$99.99
3 Ohm mini coil , compatible with
most single fire ignitions, includes
bag with terminals (ARB O.E. number D-641-2) Sold each. ��$63.99
12381
Dynatek Dyna-Mite Coils
Feature the same dependability and
performance as the original ‘Dyna’ coils and
produce spark voltages in excess of 30,000
volts with spark energies second-to-none.
All ‘Dyna’ coils are covered by a Limited
Manufacturers Warranty against defects in
materials and workmanship.
12381
3.0 Ohm for electronic ignitions
(MFG #DC6-1)��$84.99
12382
5.0 Ohm for use with point ignitions
(MFG #DC7-1)��$84.99
ELECTRICAL
APPAREL
SEATS &
BAGS
FOOT
CONTROLS
668032
HAND
CONTROLS
Accel Single Fire 3 Ohm ‘Super Coil’
This ‘Super Coil’ is just as powerful as the original. Makes for a perfect replacement or
upgrade and will bolt right on with no modifications to your bracket. Fits all Big Twin and
Sportster models (except Twin Cam models or fuel injected models) with aftermarket single
fire ignitions from 65-06. Comes in black and ‘Accel Yellow’.
668002Yellow��$139.99
668033Black��$139.99
LIGHTING
ELECTRICAL
EXHAUST
668057
INTAKE
ENGINE
Accel Power Pulse Coil
25411
Accel performance coil with a unique design that provides longer spark duration with a
greater KV rating and faster rise time than the stock coil. Molded in bright yellow epoxy, it
is guaranteed to improve starting, mid-range response and top-end performance.
25507
Fits 12-volt models with point-triggered or Prestolite electronic ignitions from 65-79
(4.2 Ohm primary resistance) ��$99.99
GASKETS
TRANSMISSION
& CLUTCH
Accel Super Coils
These coils produce up to 67% more
voltage than stock coils. They also have a
faster rise time and longer spark duration
which provide quicker starting, an
improved idle and crisper throttle response.
Other features include a finned top which
acts as a voltage dam to prevent arcing,
carbon-tracking and “flashover”, as well as
improved configurations to permit simple
bolt-on installations. Come in black or
‘Accel Yellow’ or chrome. Fits all 12-volt
models with point-triggered or Prestolite
ignitions from 65-79 (4.7 Ohm primary
resistance).
25410Yellow��$109.99
668031Black��$109.99
668056Chrome��$119.99
Fits all models with electronic ignitions
(except Twin Cam engines and fuel injected
Evolution engines) from 80-03 (2.3 Ohm
primary resistance)
25411Yellow��$119.99
668032Black��$119.99
668057Chrome��$129.99
Note: These coils may not be used in conjunction with
CC #’s 15205 or 15206 coil covers due to interference
problems.
DRIVELINE
WHEELS
TIRES &
BRAKES
CHASSIS
SHEETMETAL
668367
INSTRUMENTS
& GAUGES
668368
Accel Super Coils for Twin Cams
These ACCEL Motorcycle Super Coils are designed to produce the maximum amount of
spark energy, fast coil rise times and a voltage output that is 45% higher than the OEM
coil. The ACCEL Super Coil is our highest output motorcycle coil. The Electronic Super
Coil is easily installed in the OEM location using stock (later model year) coil covers on
electronic ignitions.
668367 Accel Carbureted Twin Cam -06��$139.99
668368 Fits fuel injected Softails 01-06, Dynas 04-05 and 2011 and Touring models 02-07��$139.99
5.15
GENERAL
CROSS
REFERENCE
ELECTRICAL
Stock Replacement Coils by Powerband
While these coils all share the same physical configuration as the
current production late-model electronic ignition coil, they all
feature the exact same electrical specifications of their respective
Original Equipment counterparts.
5
Note: These coils are not interchangeable. Misapplication may shorten point life or damage
other components.
Fits all 12-volt Sportster or Big Twin models from 65-79 with points or
Prestolite electronic ignitions.
25412
Replaces OEM 31609-65A ��$66.99
Fits Big Twin models from 84-99 and Sportster models from 85-03
with V-Fire III ignitions.
25414
Replaces OEM 31614-83��$68.99
Vulcan Engineering Coil Brackets
These billet aluminum coil brackets come in both powder coated
gloss black and chrome and are designed to work with two post style
Dynatek or RevTech coils in single tower design. These gothic style
brackets are destine for overnight success and fit all Big Twins with
coil mount top motor mounts.
Powder Coated Gloss Black with Machined Edges
668120 With ignition switch hole and starter button hole��$131.99
668122 With ignition switch hole ��$131.99
668121Plain ��$131.99
Chrome
668123 With ignition switch hole and starter button hole
668125 With ignition switch hole ��$121.99
668124Plain ��$121.99
Accessories
668126 Starter push button switch ��$14.99
12286
Ignition switch (repl. OEM 71425-77T)��$22.99
Thunderbolt Coil
The internal windings are 100% immersed in an oil-filled jacket. The
oil insulation cannot become brittle with age or crack from heat
like conventional jelly materials. Includes wire-core ‘yellow jacket’
spark plug leads with black 90° plug boots, a chromed coil bracket,
hardware and a “THUNDERBOLT” sticker.
25588
12-volt coil with 5.0 Ohms of resistance for use with point-type
ignition systems��$41.99
Vulcan Engineering Top Motor Mounts
These motor mounts are made of 6061 billet aluminum and available
in chrome plated or gloss black powder coat. They come complete
with stainless steel hardware and an optional 1” spacer to clear big
fin heads. These motor mounts work great with the Vulcan Gothic
Coil Mounts.
Powder Coated Gloss Black
668190 Fits Evolution Big Twins from 84-99 – Black ��$144.99
668191 Fits Panhead & Shovelheads from 48-84 – Black ��$144.99
668192 Fits Twin Cams from 99-05 in stock frames – Black��$144.99
668193 Choke Bracket – Black ��$29.99
Chrome-Plated Original-Style Coil
Original-style square coil complete with copper core wires,
connectors and bracket. Available to fit many models from 48-E82.
They’re not compatible with electronic ignitions on 80-Up models.
Plug wires are 13” and 23” long. Sold each.
1713212-volt ��$56.99
5.16
Chrome
668164
668165
668166
668167
Fits Evolution Big Twins from 84-99 ��$147.99
Fits Panhead & Shovelheads from 48-84 ��$144.99
Fits Twin Cams from 99-05 in stock frames��$144.99
Choke Bracket ��$29.99
ELECTRICAL
APPAREL
26378
688075
SEATS &
BAGS
FOOT
CONTROLS
HAND
CONTROLS
Chrome Antique-Style Coil Covers
Chrome or Black Coil Covers
A variety of styles to add the perfect custom touch to your machine.
Fit 4-speed Big Twin and Softail models from 65-99.
26378
Louvered chrome coil cover (repl. OEM 31610-83T)��$16.99
688076 Louvered black coil cover (repl. OEM 31610-83T) ��$17.99
15210
Plain chrome coil cover (repl. OEM 31606-65TA) not shown
��$16.99
688075
Designed after the popular covers used in the mid-1940s. The two
openings in the front permit easy access to the plug wires, and the
inside of the covers features a heavy-duty mounting bracket.
15206
Fits all Softail models 84-99��$29.99
15205
Fits 4-speed Big Twins from 65-86 (except Softail models)
��$36.99
LIGHTING
ELECTRICAL
Note: These coil covers may not be used in conjunction with CC #’s 25410 or 25411 due to
interference problems.
Plain black coil cover (repl. OEM 31606-65TA)��$17.99
EXHAUST
INTAKE
ENGINE
GASKETS
TRANSMISSION
& CLUTCH
Chrome Ignition Module Cover
Coil Cover for FXR Models
A beautiful chrome-plated coil cover for all FXR models from 82-94.
15207
Replaces OEM 31625-82T��$18.99
Chromed steel cover replaces the standard black metal cover on
Sportster models from 82-03.
25254
DRIVELINE
Ignition Module Bolt Kit
Secure the ignition module cover on Sportster models. Three-piece
chrome-plated countersunk sockethead screw kit.
32049
Fits models from 98-03 (module cover not included)��$7.99
WHEELS
TIRES &
BRAKES
CHASSIS
SHEETMETAL
651307
25236
INSTRUMENTS
& GAUGES
Chrome Coil Bracket
Magneto Coil
Fits all Original Equipment Harley-Davidson magnetos as well as the
Morris Magnetos.
26268
Sold each��$87.99
Heavy-duty chrome plated coil brackets for Big Twins 48-82. Can
also be used for custom builds with frames having the coil mounts
on the left hand side of the down post.
25236
Coil bracket repl. OEM 31728-78TA ��$15.99
651307 Coil bracket repl. OEM 31725-48A ��$18.99
5.17
GENERAL
CROSS
REFERENCE
ELECTRICAL
688873
688874
688876
688873
5
BEFORE
688870
688871
AFTER
688870
Spark Plug/Head Bolt Cover Kits
Conceal and hide the head bolts and spark plug area on your motor. These aluminum die cast spark plug and head bolt covers comes in
various styles like a chrome smooth bridge style or highlighted finned style either black or natural aluminum. Easy to install in minutes.
Includes all necessary mounting hardware. Sold in pairs.
Fits all Twin Cams models 99-Up (except SE heads or 110 SE engines)
688870 Chrome smooth bridge style. Replaces OEM# 43858-00 �� $49.99
Fits Twin Cams EFI models 99-Up
688872 Natural highlighted finned style . Replaces OEM# 43857-00�� $49.99
688873 Black highlighted finned style. Replaces OEM# 43859-00 �� $49.99
Fits Twin Cam Carbureted models 99-06
688874 Natural highlighted finned style . Replaces OEM# 43840-01�� $49.99
Fits Sportster models 04-Up
688871 Chrome smooth bridge style. Replaces OEM# 44432-04 �� $49.99
688877 Natural highlighted finned style. Similar to OEM# 44296-04 ��$49.99
5.18
ELECTRICAL
APPAREL
SEATS &
BAGS
602141
FOOT
CONTROLS
Taylor Pro-Spark High-Performance Plug Wire Sets
The best ignition system and coils in the world won’t help fire plugs with
ineffective plug wires. Color-matched plug boots are bonded directly to
the wire in 90° and 180° styles in pre-cut or universal kits. Universal kits
include two 24"-long spark plug wires with a 90° boot bonded to one
end. Cut the wires to length, and attach the coil boots to the cut ends.
‘Pro-8’ Wire Sets
Spiro-Wound resistor wires are made with highly-conductive materials
– the core is thermally-cured and has two conductors that act as a minicircuit of resistance in parallel. The result is a wire that has 1/10th the
resistance of normal resistor-core plug wires, yet provides protection
from interference that can play havoc with stereos, CB radios or
sophisticated electronic ignitions. It is appropriate for point or electronic
ignitions in racing or street applications.
HAND
CONTROLS
LIGHTING
602189
ELECTRICAL
EXHAUST
Series Custom Fit Wire Sets
Model
Engine
Model
Year
FL
65-79
FL
Shovelhead
80-98
FLH
Shovelhead &
Evolution
99-03
FL
Twin Cam
Black
Price
Red
8mm Spiro Pro
Price Yellow
Price
Blue
Price
602130
$18.99
602131
$18.99
602132
$19.99
602133
$18.99
Touring Models
602138
$20.99
602139
$20.99
602140
$22.99
602141
$20.99
Touring Models with Carb.
602142
$20.99
602143
$20.99
602144
$22.99
602145
$20.99
602146
$21.99
602147
$21.99
602148
$23.99
602149
$21.99
99-08
FL
Twin Cam
Touring Models with Fuel
Injection
09-Up
FX
65-85
FL
Twin Cam
Touring Models
602154
$25.99
602155
$25.99
602156
$27.99
602157
$25.99
FX
Shovelhead
Super Glide & Wide Glide
602130
$18.99
602131
$18.99
602132
$19.99
602133
$18.99
FXR
Shovelhead &
Evolution
FXR
602150
$18.99
602151
$18.99
602152
$20.99
602153
$18.99
Dyna
Dyna
602130
602134
$18.99
$22.99
602133
602137
$18.99
$20.99
602132
602136
$19.99
$20.99
602131
602135
$18.99
Softail
Softail (except Rocker
Models)
Softail Rocker or center
mount Twin Cam Coils
602130
$18.99
602131
$18.99
602132
$19.99
602133
$18.99
602134
$20.99
602135
$20.99
602136
$22.99
602137
$20.99
602158
$20.99
602159
$20.99
602160
$22.99
602161
$20.99
Sportster
Sportster (except 1200 XL
with 4 wires)
Sportster (except 1200 XL
with 4 wires)
Sportster
602130
$18.99
602131
$18.99
602132
$19.99
602133
$18.99
602138
$20.99
602139
$20.99
602140
$22.99
602141
$20.99
602146
$21.99
602147
$21.99
602148
$23.99
602149
$21.99
602142
$20.99
602143
$20.99
602144
$22.99
602145
$20.99
602186
$20.99
602187
$20.99
602188
$21.99
602189
$20.99
82-00
91-98 FXD
99-07 FXD
Softail
86-99 FL / FX
Evolution
00-14
FL / FX
Twin Cam
08-Up
FXC
Twin Cam
Twin Cam
Evolution
Sportster
65-85 XL
Iron Head
86-03
XL
Evolution
04-06
XL
Rubber Mount
Rubber Mount
07-Up XL
Universal
24" with 90 degree boot. Coil
ends not installed.
INTAKE
ENGINE
GASKETS
TRANSMISSION
& CLUTCH
$20.99
DRIVELINE
WHEELS
TIRES &
BRAKES
CHASSIS
SHEETMETAL
INSTRUMENTS
& GAUGES
GENERAL
CROSS
REFERENCE
5.19
ELECTRICAL
Accel Thundersport 5mm Ignition
Wire Kits
Half the diameter of stock wire and extremely
flexible. Easy to run through cylinder heads,
rocker covers, and frame tubes for a totally
hidden look. 150 Ohms per foot FerroSpiral wound alloy conductor delivers super
performance. The high gloss 5mm silicone jacket
is rated for over 550 degree F and 60KV. They
are available in four different colors, and packed
with two 5 foot leads with 90 degree spark plug
ends crimped on. Just run the wire, cut off excess,
and follow the easy instructions to terminate the
straight coil boots. Fits all models except those
with Delphi fuel injection.
668003Black�� $49.99
668004Yellow�� $49.99
668005Red �� $49.99
668006Blue�� $49.99
5
Accel 8mm Spark Plug Wire Sets
Accel 8mm wires deliver up to 5x more energy
to the spark plug. Fully compatible with Fuel
Injected or Carbureted engines. Can withstand
temperatures over 500º. Silicone outer layer
available in a variety of colors.
Fits 00-Up FXST, FLST Models (except
FXCW/C)
668067Blue�� $29.99
668068Black�� $29.99
668069Red �� $29.99
668070Yellow�� $29.99
668059
668060
Fits 99-Up FXD/FXDWG Models
668059Blue�� $29.99
668060Black�� $29.99
668061Red �� $29.99
668062Yellow�� $29.99
Fits 99-08 FLHT/FLTR Models
668063Blue�� $29.99
668064Black�� $29.99
668065Red �� $29.99
668066Yellow�� $29.99
Fits 09-Up FLHT/FLTR Models
668361Blue�� $29.99
668362Black�� $29.99
668359Red �� $29.99
668360Yellow�� $29.99
668061
668062
Fits 07-Up XL Models
668357Blue�� $29.99
668358Black�� $29.99
668355Red �� $29.99
668356Yellow�� $29.99
Fits 09-13 XR1200 Models
668365Blue�� $29.99
668366Black�� $29.99
668363Red �� $29.99
668364Yellow�� $29.99
5.20
ELECTRICAL
APPAREL
SEATS &
BAGS
FOOT
CONTROLS
Accel Bulk Spooled Ignition Wire
60 foot spool of 8.8mm plug wire now available in bulk. Now you can
build your own plug wires to your custom length.
668012Black��$239.99
Accel Boot and Terminals for Spark Plug Wires
For use with 8.8 mm plug wire. Each pack contains 10 each of boots
and terminals.
668007 90 degree boot with terminals for spark plug end��$4.50
668008 Adjustable boot with terminals for spark plug end (flexible
boot that will hold its position)��$6.00
668009 Straight angle boot with terminals for ignition coil end��$4.50
668010 90 degree boot with terminals for ignition coil end��$4.90
HAND
CONTROLS
Accel ‘300+’ Plug Wire Sets
8.8 mm core has 300% greater current capacity than most other
‘high-performance’ ignition wires, yet still suppresses radio
frequency interference that electronic ignition systems demand.
23788
Fits all Softail models from 91-99��$31.99
23826
Fits Dyna Glide models from 99-06 (except models with
Delphi fuel injection), Fits all Buell models from 99-06 �$31.99
23782
Fits Dyna Glide models from 91-98; Softail models from
84-90; FX models from 85-86; Sportster models from 71-85
LIGHTING
ELECTRICAL
��$31.99
23785
23827
23789
23787
23828
23783
23793
Fits all FXR models from 82-99��$31.99
Fits Touring models from 99-06 (except models with Delphi
fuel injection)��$31.99
Fits Touring models from 91-98��$31.99
Fits Evolution Sportster models (except XL1200S models)
from 86-06��$31.99
Fits 4-plug Sportster XL1200S from 98-06 ��$60.99
Fits 4-speed FX models from late 78-84 and 4-speed FL
models 65-84��$31.99
Universal 2-plug applications (except Twin Cam 88 models
with Delphi fuel injection) ��$33.99
EXHAUST
INTAKE
ENGINE
GASKETS
TRANSMISSION
& CLUTCH
DRIVELINE
Accel Black 8.8mm Custom Wire Sets
Black with black plug boots. Non-resistor stainless-reinforced highconductivity silver-plated copper wire or resistor suppression core.
High dielectric-strength silicone plug boots prevent arcing to cylinder
heads, and brass coil terminals have weatherproof boots attached at
the factory to insure perfect termination.
Stainless/Copper Core
26872
Fit all Sportster models with magneto from 58-69��$26.99
26870
Fit all 4-speed FL and FX models from 65-E78 ��$26.99
26871
Fit Sportster models from 71-E78 ��$26.99
WHEELS
TIRES &
BRAKES
Suppression Core
26868
Fit all 4-speed FL and FX models (except Softail models) from
late 78-84��$26.99
26869
Fit Sportster models from late 78-85, FX models from 85-86;
Softail models from 84-90; Dyna Glide models from 91-98
SHEETMETAL
��$26.99
26875
26873
26874
26884
26885
Fit Evolution Sportster models (except XL1200S models) from
86-03��$26.99
Fit all FXR models from 82-99��$26.99
Fit all 5-speed Touring models 80-84 ��$26.99
Fit all Softail models from 91-99 ��$26.99
Fit all Touring models from 91-98��$26.99
CHASSIS
Universal Black Spark Plug Wires by Compu-Fire
For use with all custom applications utilizing single or dual plug
heads and any coil combination.
23232
8mm spiral wound plug wire set for four-plug applications
��$30.99
INSTRUMENTS
& GAUGES
GENERAL
CROSS
REFERENCE
5.21
ELECTRICAL
668302
668285
Moroso Ultra 40 Plug Wire Sets
5
Moroso Ultra 40 plug wires set the standard in high performance
ignition wires. With optimized EMI (electro magnetic) and RFI (radio
frequency) resistance, Moroso wires are used In the highest levels of
racing from dual mag Top Fuel Cars thru NASCAR Sprint Cup Series.
At 40 ohms of resistance per foot the 8.65mm Ultra 40 features a
highly engineered, spiral-wound conductor that maximizes energy
transfer and minimizes noise interference.
668305 Fits all Softail models 00-14��$24.99
668297 Fits all Softails 84-99, FXD 91-98 and FL 80-84 ��$24.99
668301 Fits all FLT, FLHT, FLHR, FLTR models 97-98 ��$24.99
668298 Fits all FLT, FLHT, FLHR, FLTR models 85-96 and FLHS 82-93
��$24.99
668303
668299
668307
668306
668300
668308
Fits all FXD models 99-Up ��$24.99
Fits all FXR models 82-99 ��$24.99
Fits all XL models 07-14 ��$24.99
Fits XL models (except 1200S) 86-03 ��$24.99
Universal wire kit ��$24.99
Moroso 8mm Spiral Core Plug Wire Sets
Moroso’s Spiral Core Ignition Wire specifications were conceived and
designed by Moroso engineers using the latest technology and finest
materials obtainable. When manufacturers completed the extrusion
process, Moroso Ignition Wire had achieved unsurpassed energy
transmission, electro-magnetic interference suppression and dielectric
strength. The wire has been used successfully on every type of vehicle
from common Street vehicles to Top Fuel Dragsters and NASCAR
Nextel Cup Stock Cars.
��$19.99
668286
668282
668295
668289
668283
668287
668296
Fits all FXD models 99-14��$19.99
Fits all FXR models 82-99��$19.99
Fits XL models (except 1200S) 86-03��$19.99
Fits all XL 1200S models��$35.99
Universal wire kit ��$19.99
Moroso Suppression Core Plug Wire Sets
Looking for a quality plug wire to replace your stock wires that have
seen better days? Here are some wires that will out perform your
stock ones but won’t cost you an arm and a leg. Proudly made in the
USA with the finest materials available.
668278 Fits all Softail models 00-14��$15.99
668291 Fits all FX/FL Big Twins 65-78 ��$15.99
��$15.99
668276
668272
668290
668279
668273
668277
668292
668293
668294
5.22
Fits all FXD models 99-Up ��$15.99
Fits all FXR models 82-99��$15.99
Fits XL models (except 1200S) 86-03��$15.99
Fits all XL 1200S models��$29.99
Universal wire set ��$17.99
Blue Streak Plug Wires for Points Ignitions
For older points style ignitions Blue Streak offers a ‘Copper Core’
plug wire set with improved electrical conductivity and mechanical
strength. These non resistive sets should only be used with points
ignitions, proudly made in the USA.
668260 Fits XL and XLCH models with magneto 65-69��$21.99
668261 Fits all XL models 71-78 ��$21.99
668262 Fits 65-78 FL, FLH and 71-78 FX FXE models ��$21.99
ELECTRICAL
APPAREL
SEATS &
BAGS
668339
FOOT
CONTROLS
668336
HAND
CONTROLS
668335
LIGHTING
ELECTRICAL
668340
EXHAUST
668338
INTAKE
Blue Streak Silicone Plug Wire Sets
These replacement plug wire sets feature triple silicone construction throughout jacket, insulation and core. They meet or exceed SAE J2031
and J2032 specifications. Proudly made in the USA.
668330 Universal multi-fit set�� $20.99
668331 Fits all Softails 84-99, FXD 91-98 and FL 80-84 �� $21.99
668332 Fits all FLT, FLHT, FLHR, FLTR models 85-96 and FLHS 82-93�� $21.99
668333 Fits all FXR models 82-99�� $21.99
668334 Fits XL models (except 1200S) 86-03�� $21.99
668335 Fits all FLT, FLHT, FLHR, FLTR models 97-98 �� $21.99
668336 Fits all FLT, FLHT, FLHR, FLTR models 99-08 �� $21.99
668337 Fits all FXD models 99-14�� $21.99
668338 Fits all XL 1200S models�� $42.99
668339 Fits all Softail models 00-Up �� $21.99
668340 Universal 4 plug multi-fit set�� $44.99
668341 Fits all XL models 04-06 �� $21.99
668342 Fits all XL models 07-14 �� $21.99
ENGINE
GASKETS
TRANSMISSION
& CLUTCH
DRIVELINE
WHEELS
TIRES &
BRAKES
CHASSIS
SHEETMETAL
Spark Plug Wire Separators
Machined from billet aluminum and available in brilliant chrome
or a red, blue or black anodized finish with stylish accent grooves.
Sold each.
78412Chrome��$8.99
78413Red ��$8.99
78414Blue��$8.99
78415Black��$8.99
5.23
INSTRUMENTS
& GAUGES
GENERAL
CROSS
REFERENCE
ELECTRICAL
5
E3 Spark Plugs
The E3 DiamondFire technology spark plugs have a patented “open
diamond shape side-wire electrode”. These spark plugs projects the
spark to quickly ignite the air/fuel mixture giving you up to 13%
more power, up to 12% better fuel efficiency and up to 50% lower
emissions. A “chimney effect” promotes the fastest and longest
flame kernel. Most powerful and complete combustion of any spark
plug brand. Multiple sharp edges provides long life and maximum
performance. Pre-gapped ready to install. Sold each.
688880 Fits Shovelhead models 75-84 and Evolution Big Twins models
84-99 ��$8.99
688881 Fits all Twin Cam models 99-Up and Sportster models 86-Up
Pulstar Pulse Spark Plugs
Pulstar spark plugs generate up to 12% more horsepower and
torque. They improve fuel efficiency, throttle response. The
Pulstar plugs come with iridium electrodes and a capacitor built
in for increased spark energy.
Note: For engines with performance modifications it is recommended to richen the air fuel
mixture and slightly retard the timing.
688110
688111
Pulstar plug 2PK for Twin Cams��$35.00
Pulstar plug 2PK for Evolution and Shovelheads��$35.00
��$8.99
Accel ‘CycleLite’ Platinum Spark Plugs
Platinum-tipped high-performance plugs will maintain a precise gap
longer for more consistent ignition performance and better mileage.
Side electrode is from high-chromium/nickel alloy for better spark at
any voltage level.
Premium Spark Plugs
Accel CycleLite Platinum
Size
Model
1450cc
All Twin Cam, 99-14
OEM Qty Accel # Part #
6R12
2
Y2418P
22023
$19.99
Price
1340cc
All Evolution 84-99
5R6A
2
Y2410P
22024
$19.99
1340cc
All Shovelheads 80-81
5R6A
2
Y2410P
22024
$19.99
1200cc
Sportster 86-03, Buell
88-03
6R12
2
Y2418P
22023
$19.99
1200cc
All Shovelheads L78-80
5R6A
2
Y2410P
22024
$19.99
1100cc
Sportster 86-87
6R12
2
Y2418P
22023
$19.99
883cc
Sportster 86-Up
6R12
2
Y2418P
22023
$19.99
Note: NGK Iridium IX spark plugs are priced each, but sold in boxes of 4. Please order
accordingly.
5.24
Autolite Xtreme Sport Spark Plugs
Autolite Xtreme Sport spark plugs are engineered to meet or exceed
OE designs. They were designed with iridium-enhanced 0.6mm
finewire. They provide up to 26 percent quicker starts compared to
that of standard plugs and as much as 21 percent less hydrocarbon
emissions than standard plugs, which promotes better fuel
efficiency and horsepower. Sold each.
651200 XS spark plugs for Evolution Big Twins (3/4” reach)�� $8.99
651201 XS spark plugs for Shovelheads (3/8” reach) �� $8.99
651202 XS spark plugs for all Twin Cams and Evolution Sportsters
�� $8.99
ELECTRICAL
APPAREL
Accel ‘U-Groove’ Spark Plugs
Autolite Spark Plugs
The ground electrode builds the spark to a
“ball of fire” flame providing a smoother
idle and better combustion. Five-rib
insulator prevents flashover and misfire,
copper glass inner seal and electric heat
seal prevent combustion leakage and fused
copper/nickel center electrode has a wide
heat range.
Longer insulators resist carbon fouling
and operate efficiently over a wide heat
range. Insulators seal against combustion
pressure leakage and transfer heat from
the lower insulator tip into the threads and
cylinder head. Copper core center electrode
is sheathed in nickel chromium alloy for
superior heat dissipation and durability.
‘Necked-down’ electrode requires lower
sparking voltage for easier starting and heat
range control.
SEATS &
BAGS
Champion Copper Plus Spark
Plugs
Features include a wider-base insulator
which provides an easier path to speed
the transfer of heat and a longer insulator
nose containing a center electrode of
pure copper inside of chrome-nickel to
transfer heat between firings and help
resist fouling.
FOOT
CONTROLS
HAND
CONTROLS
LIGHTING
ELECTRICAL
EXHAUST
Size
Standard Spark Plugs
Accel U-Groove
Model
OEM
Qty
Accel #
Part #
1450cc
1340cc
1340cc
1340cc
All Twin Cam 99-14
All Evolution 84-99
6R12
5R6A
2
2
2418
2410A
22016
22012
Price
Qty
$10.99 4
$10.99 4
5R6A
2
2410A
22012
$10.99
1340cc
All Sportster 86-03; Buell
models 88-03
All Shovelheads 75-E78
All Big Twins 48-74
Knuckleheads 41-47
All Sportster 79-85
XR-1000, 83-85
All Sportster 72-78
Knuckleheads 36-47
All Sportster 57-71
All Sportster 86-Up
All 45-73
5A6A
2
2403A
22011
6R12
2
2418
5R6A
5A6A
3-4
3
4R5
6R7
2
2
2
2410A
2403A
2401
1200cc
1200cc
1200cc
1200cc
1200cc
1000cc
1000cc
1000cc
1000cc
900cc
883cc
750cc
Part #
4
4
4164
4265
4345
4265
$10.99
4
22016
$10.99
22012
22011
22000
$10.99
$10.99
$10.99
3
6R12
3
2
2418
Autolite Standard
Autolite #
22016
$10.99
Champion Copper Plus
Qty
Champion #
Part #
22183
22185
22181
22185
Price
$3.00
$3.00
$3.00
$3.00
4
4
10
4
RA8HC
RN12YC
RN13LYC
RN12YC
22122
22129
22130
22129
Price
$3.00
$2.75
$2.67
$2.75
4265
22185
$3.00
4
N12YC
22121
$3.00
4
4164
22183
$3.00
4
RA8HC
22122
$3.00
4
4
4
4265
4265
4275
22185
22185
22186
$3.00
$3.00
$2.50
4
4
4
4123
4252
4316
22182
22184
22180
$3.00
$2.50
$2.50
4
4
4
6
10
RN12YC
RN12YC
J12YC
D16
RL82YC
22129
22129
22115
22140
22123
$2.75
$2.75
$3.00
$3.33
$3.75
4
4
4316
4164
22180
22183
$2.50
$3.00
4
6
4
4
6
H8C
D16
H8C
RA8HC
D16
22120
22140
22120
22122
22140
$3.00
$3.33
$3.00
$3.00
$3.33
INTAKE
ENGINE
GASKETS
TRANSMISSION
& CLUTCH
DRIVELINE
WHEELS
TIRES &
BRAKES
CHASSIS
SHEETMETAL
Champion Spark Plug Service
Pack
Convenient 24-pack of the best selling
Champion plug for Evolution Big Twin
engines from 84-99 and Shovel-head
engines from late 78-81 (RN12YC)
031217 Replaces HD 5R6A (OEM 3231183)�� $2.50
INSTRUMENTS
& GAUGES
GENERAL
CROSS
REFERENCE
5.25
ELECTRICAL
A
B
C
D
E
5
030608 KIT
Accel ‘Lectric’ Stators
Made from the finest components, these high-quality
stators are backed by a lifetime replacement warranty.
18875
Molded, for Sportster models late 84-90 (repl.
OEM 29967-84) Plug “E”��$113.99
18874
Unmolded, for Sportster models late 84-90 (repl.
OEM 29967-84A) Plug “E”��$113.99
18877
Unmolded, for Sportster models from 91-03 (repl.
OEM 29967-89) Plug “E”��$113.99
18870
Unmolded, for Big Twins 70-75 (repl. OEM 2996570) Plug “A”��$178.99
18871
Molded, for Big Twins 76-80 (repl. OEM 29965-75)
Plug “B”��$129.99
18872
Molded, for Big Twins 81-88 (repl. OEM 29965-81)
Plug “C”��$114.99
18873
Unmolded, for Big Twins 81-88 (repl. OEM 2996581A) Plug “C”��$112.99
18876
Unmolded, for Big Twin models (except Touring
models) from 89-99, and Touring models from
89-95, as well as earlier models with the accessory
32 amp. alternator kit (repl. OEM 29970-88) Plug
“D” ��$113.99
668029 Unmolded, for Touring models from 97-98 with
38 amp. alternator (repl. OEM 29987-97) ��$224.99
668028 Unmolded, for Dyna models 00-03, Softail 00
(repl. OEM 29951-99) ��$224.99
Stator Mounting Kit
030608 Includes lock plates, plug retainer and hardware.
Fits Big Twins 70-13��$10.99
Motor Factory Stators for Big Twin and Sportster Models
Manufactured in the USA to Original Equipment specifications. Available in
several versions to fit most Big Twins from 70-01 and alternator-equipped
Sportster models from late 84-03.
For Sportster Models
56222
Molded, for Sportster models from late 84-90 (repl. OEM 29967-84) Plug “E”,
22 amp��$74.99
56223
Unmolded, for Sportster models from late 84-90 (repl. OEM 29967-84A) Plug
“E”, 22amp��$64.99
640950 Unmolded, for Sportster models from late 89-03 (repl. OEM 29967-89), Plug
“E”, 17 amp��$64.99
For Big Twin Models
56225
Unmolded, for Big Twin models from 70-75 (repl. OEM 29965-70) Plug “A”,
18 amp��$98.99
56226
Molded, for Big Twin models from 76-80 (repl. OEM 29965-75) Plug “B”, 17
amp��$67.30
56227
Molded, for Big Twin models from 81-88 (repl. OEM 29965-81) Plug “C”, 22
amp��$64.99
56228
Unmolded, for Big Twin models from 81-88 (repl. OEM 29965-81A) Plug “C”,
22 amp��$64.99
56229
Unmolded, for Big Twin models from 89-99, and earlier models with the
accessory 32 amp. alternator kit (repl. OEM 29970-88C) Plug “D”��$64.99
640951 Unmolded, for Touring models from 97-98 (repl. OEM 29987-97), 40 amp
��$132.99
640952
Unmolded, for Touring models from 99-01 (repl. OEM 29987-99), 40 amp
��$132.99
Stator Mounting Screws
Set of Torx¨ head screws for mounting stators to engine cases. Measure 10-24 x
1"-long.
75272
Fits Evolution & Twin Cam Softail & Dyna models 89-06. Replaces OEM 2720.
Pack of 4. Price each. ��$1.37
Set of Torx¨ head screws for mounting stators to engine cases. Measure 10-24 x 1
1/4"-long.
17268
Fits Touring models 95-05. Replaces OEM 2918. Pack of 10. Price each. ��$1.10
Stator Mounting Kit
030608 Includes lock plates, plug retainer and hardware. Fits Big Twins 70-13
��$10.99
5.26
ELECTRICAL
APPAREL
SEATS &
BAGS
FOOT
CONTROLS
HAND
CONTROLS
LIGHTING
Motor Factory Charging System
Upgrade Kits
Enjoy a remarkable improvement in
electrical performance by installing one of
these Custom Chrome 32-amp systems. Each
one includes a Motor Factory alternator,
rectifier/regulator and an alternator rotor.
Fit all Big Twins except Twin Cam Models
from 70-99.
56230
With black rectifier��$214.99
56232
With chrome rectifier �� $229.99
ELECTRICAL
Spyke Super-Duty 32 Amp
Charging Systems
Heavy-duty forged steel rotors featuring
encapsulated magnets, thick gauge stator
windings with three rib plugs, and durable
solid-state voltage regulators, in your choice
of black or chrome finishes. Fits all Big Twins
from 70-99, (except Fuel Injected models
and TwinCams)
28849
With black regulator��$249.99
28836
With chrome regulator ��$260.99
Heavy Duty Forged Alternator
Rotor by Spyke
Thicker-than-stock black powder forged
steel rotors have encapsulated magnets
for durability. Features more steel
around the critical spline contact area for
better engagement. Ideal for high RPM
performance applications.
28597
Fits Softail 91-00 and Dyna Glide
models from 86-99 �� $145.99
EXHAUST
INTAKE
ENGINE
GASKETS
TRANSMISSION
& CLUTCH
DRIVELINE
WHEELS
TIRES &
BRAKES
CHASSIS
SHEETMETAL
INSTRUMENTS
& GAUGES
GENERAL
CROSS
REFERENCE
5.27
ELECTRICAL
5
Compu-Fire Charging Systems
A must have for overloaded electrical systems!
• Made in the USA, delivers increased charging
• Systems include stator, rotor and voltage regulator
32 Amp Charging Systems
Each kit includes a stator, rotor and a black rectifier/regulator.
17016
Fits all Big Twin engines with Original Equipment sprocket shafts from 81-99��$254.99
23229
Fits all S&S Evolution Big Twin engines or stock engines with S&S sprocket shafts��$254.99
Replacement Parts
17030
32 amp for Evolution Big Twin models from 89-99��$112.99
17014
Alternator rotor for CC #17016 ��$108.99
23226
Alternator rotor for 32 amp and 40 amp charging systems, for CC #’s 23229 ��$108.99
17018
32 amp stator for CC#’s 17016 and 23229, for most carbureted Evolution Big Twins from 89-99��$89.99
Compu-Fire Stators
Compu-Fire Alternator Rotor for S&S Shafts
Replacement rotor for Evolution Big Twins using S&S sprocket shafts.
23226
Alternator rotor for 32 amp and 40 amp charging systems, for
CC #’s 23229 ��$108.99
5.28
Either direct replacement or high-output upgrade versions, with highquality precision machine windings.
17018
32 amp stator for CC#’s 17016 and 23229, for most carbureted
Evolution Big Twins from 89-99��$89.99
ELECTRICAL
APPAREL
SEATS &
BAGS
FOOT
CONTROLS
HAND
CONTROLS
LIGHTING
32 Amp Heavy Duty ‘Lectric’ Rotor by Accel
ACCEL Motorsports Lectric stator rotors are made for high vibration
and daily drive abuse. The magnets are enclosed by stainless steel
to protect against dislodging, and a super thick housing and splines
eliminate the possibility of cracking. The perfect complement to
Accel’s Lectric Stators!
668372 32 Amp rotor for Softail and Dyna models 91-00 ��$149.99
ELECTRICAL
Accel Complete 32 Amp Charging System Kit
• Heavy Duty Rotor features magnets which are completely
enclosed in stainless steel, plus a super thick hub and splines to
eliminate cracks
• Stator is precision wound with premium copper to ensure long
life and the highest possible output
• Controlled by a premium chrome plated regulator
• Entire package backed by Accel’s Limited Lifetime Replacement
Warranty (see warranty information for details)
668055 Complete Charging System – Fits Softail and Dyna models
from 91-99�� $299.99
EXHAUST
INTAKE
ENGINE
GASKETS
TRANSMISSION
& CLUTCH
DRIVELINE
WHEELS
TIRES &
BRAKES
CHASSIS
SHEETMETAL
Late Model High Output Stators by Accel
Accel Complete 38 Amp 3 Phase Charging System Kit
• Heavy Duty Rotor features premium quality magnets to ensure
long life
• Stator is precision wound with premium copper to ensure long life
and the highest possible output
• Controlled by a premium chrome plated regulator
• Entire package backed by Accel’s Limited Lifetime Replacement
Warranty (see warranty information for details)
668052 Complete Charging System – Fits Softail models 01-06
�� $349.99
Made from the finest components available, these high quality
ACCEL Motorcycle Lectric stators are precision machine-wound and
produce the highest output possible. The windings are then coated
to maintain isolation of the pure copper windings from potential
grounding sources.
668373 40 Amp 3 phase stator fits Softail and Dyna models 07
��$169.99
668053
668375
668374
Fits Twin Cam Softail models from 01-06 and Twin Cam Dyna
models from 04-06 ��$99.99
50 Amp stator for Touring models 06-13��$206.99
38 Amp stator for Touring models 99-01��$206.99
5.29
INSTRUMENTS
& GAUGES
GENERAL
CROSS
REFERENCE
ELECTRICAL
A
B
C
D
E
F
G
H
J
K
L
Solid State Rectifier/Regulators
Plug
Style
Replaces
OEM #(s)
MotorFactory Finned
Chrome
Fit all Twin Cam Softail models from 08-10
Fit all 07 Twin Cam Softail models
Fit all Twin Cam 88 Softail models from 01-06, Dyna 00-03
Fit all 00 Twin Cam 88 Softail models
5
N/A
N/A
K
H
Fit all Twin Cam Dyna Glide from 07-Up
Fit all 06 Twin Cam Dyna Glide
Fit all Twin Cam Dyna Glide from 04-05
Fit all Twin Cam 88 Dyna Glide models from 99
N/A
N/A
N/A
H
Fits all Touring models from 09-14
Fit all Touring models from 06-08
Fit Evolution Big Twins (except EFI models and 97 and
later Touring models) from 89-99, and models with HD
accessory 32 amp stator kit
Fit all Big Twin models from 81-88
N/A
N/A
N/A
N/A
H
J
A
C
Fit Sportster models L08-13
Fit Sportster models from 07-E08
Fit Sportster models from 04-06
B
N/A
N/A
N/A
L
Fit 91 5-speed Sportster models
Fit Sportster models with alternator late 84-85
Fit Sportster models with generator 82-E84
Fit Sportster models 78-81, XLCR 77-78
F
F
F
F
D
E
74540-08
74540-07
74540-01
74610-01
74512-00
74561-99A
74631-08
74631-06
74631-04
74518-99A
74561-99A
74505-09A
74505-06
74505-04
74505-02
74505-97
74519-88
74537-93A
74515-86
74516-86
74 513-85
74512-84
74513-82A
74510-75A
74512-79A
74510-70A
74711-08
74546-07A
74523-04
74523-94
74490-00
74523-92
74523-91
74523-84A
74523-84
74504-82
74504-78
Price
Black
Accel Solid State
Price
Chrome
Price
Black
Price
648377
648375
648365
$114.99
$112.99
$74.99
648376
648374
648364
$108.99
$106.99 668072
$64.99 668024
648363
$64.99
648362
$54.99 668022
$137.99 668023
$126.99
648383
648381
648379
648361
$178.99
$176.99
$176.99
$64.99
648382
648380
648378
648360
$171.99
$169.99 668074
$169.99 668073
$55.99 668020
$198.99
$198.99
$137.99 668021
$121.99
648391
648389
648387
648385
648367
25372
$167.99
$167.99
$168.99
$165.99
$128.99
$79.99
648390
648388
648386
648384
648366
25353
$157.99
$157.99
$159.99
$154.99
$117.99
$59.99
668077
668076
668075
668026
25444
$279.99
$279.99
$279.99
$248.99 668027
$179.99 25437
$226.99
$145.99
25367
$54.99
25360
$49.99
25483
$129.99
25436
$124.99
25366
$54.99
25359
$48.99
25489
$124.99
25435
$119.99
25365
648373
648371
648369
25329
$54.99
$102.99
$102.99
$88.99
$74.99
25358
648372
648370
648368
25328
$49.99 25488
$87.99
$87.99
$74.99 668071
$54.99 668018
$149.99
25434
$124.99
$148.99
$132.99 668019
$124.99
25352
25350
25364
25363
25362
25361
$59.99
$54.99
$54.99
$54.99
$54.99
$54.99
25351
25349
25357
25356
25355
25354
$44.99
$44.99
$48.99
$49.99
$46.99
$46.99
25485
$145.99
25479
$139.99
25480
$114.99
25439
$108.99
$159.99
$182.99
Solid State Voltage Regulators to Replace Mechanical Regulators On Generator Models
Fit 12-volt Sportster models 66-77, FL models 65-69
5.30
G
N/A
25371
$54.99
25369
$44.99
ELECTRICAL
APPAREL
668024
SEATS &
BAGS
FOOT
CONTROLS
25444
HAND
CONTROLS
Accel Voltage Rectifier/Regulators
Solid-state designs feature Accel’s chrome or black baked enamel finish. Regulators are individually tested before shipment and packaged
with complete installation instructions and warranty card.
See table for applications.
LIGHTING
Accel Solid-State Voltage Regulators for Generator Models
Accel solid-state technology in regulators to replace mechanical regulators on generator-equipped bikes. 3-wire universal connection with 10"
leads – tan-armature, green-field, red-battery.
ELECTRICAL
25354
EXHAUST
INTAKE
668026
ENGINE
Motor Factory Finned Rectifier/Regulators
These rectifier/regulators utilize the latest state-of-the-art surface-mount technology. Unlike many products on the market today, our rectifier/
regulators are made with screen-printed circuit boards and ceramic components which lower operating temperatures for longer life without
temperature-related failures. They deliver improved electrical performance for lighting, battery and ignition which also helps protect valuable
power sources and wiring. They’re covered by our exclusive ‘High Voltage’ limited warranty that effectively extends coverage to one full year
from date of installation. Standard black finish with polished fins or fully chromed. Engineered in the USA.
GASKETS
Motor Factory Solid-State Voltage Regulators for Generator Models
TRANSMISSION
& CLUTCH
Solid-state voltage regulators replace earlier-style mechanical regulators on generator-equipped bikes. No battery needed for lights if used
with magneto. Covered by our exclusive ‘High Voltage’ limited warranty that effectively extends coverage to one full year from date of
installation.
DRIVELINE
36459
WHEELS
TIRES &
BRAKES
CHASSIS
SHEETMETAL
Motor Factory Low Profile Rectifier/Regulators
Here’s a smooth custom look for a very visible part on the front of your bike. We’ve taken our reliable rectifier/regulators and built them in
a low-profile case for a clean new look. As with all of our electrical components, they’re covered by our standard limited warranty and, due
to their outstanding quality, are fully eligible for our exclusive ‘High Voltage’ limited warranty that effectively extends coverage to one full
year from date of installation. Fits Evolution Big Twins 89-99 and models with HD accessory 32 amp stator kit (except EFI models and Touring
models 97-99).
36459
Chrome low profile Rectifer/Regulators �� $74.99
36458
Black low profile Rectifer/Regulators�� $65.99
INSTRUMENTS
& GAUGES
GENERAL
CROSS
REFERENCE
5.31
ELECTRICAL
23235
5
17030
Compu-Fire High Performance Series Voltage Regulators
• New generation series regulator obsoletes outmoded shunt regulators
• Black powder coated, bolt-on replacements
• Voltage output is suitable for maintenance-free batteries
• Reduces load on stator and extends stator life
• Reduces engine drag for extra power
• Delivers high performance at an exceptional cost!
17030
32 amp for Evolution Big Twin models from 89-99�� $112.99
17031
22 amp for Big Twin models from 81-88 �� $121.99
17035
22 amp for Sportster models from 91-99 and Buell models (except Blast and Firebolt models) from 93-96 �� $117.99
Compu-Fire Chrome Billet Series Voltage Regulators
Offering the same sophisticated technical features as their line of OEM-style regulators, but in an attractive “bullet-proof” chrome billet case
with mounting bracket.
23235
32 amp for Evolution Big Twin models from 89-99�� $158.99
19284
19282
Alternator Plug Retainers
Stainless Steel Alternator Plug
Retainer
Highly-polished part bolts to the front motor
mount. Fits all Big Twin models (except EFI and
Twin Cam models) from 70-99
19286
5.32
Standard and chromed heavy-duty retainers
prevent rectifier/regulator plugs from working
loose. Fit all Big Twin models (except EFI and
Twin Cam models) from 70-99.
19284
Standard retainer, stainless steel
(held by engine case bolts) card of 5
��$2.80
19282
Chrome-plated heavy-duty model
(held by front motor mount bolt)
card of 5��$4.60
Alternator Plug Retainer
Comes with self-tapping screws unlike the
Original Equipment part it replaces. Fits Big
Twins from 70-99. Sold on a card of 5.
19281
Replaces OEM 29954-71��$1.40
ELECTRICAL
12493
APPAREL
12492
SEATS &
BAGS
18900
Battery Eliminator Kit by Accel
Boost spark voltage at cranking and eliminate flickering lights
at low speed with ACCEL Motorcycle battery eliminator. Includes
shock-resistant mounting clamps and attachment hardware. Made
in the U.S.A.
668371 Battery eliminator��$43.99
Accel Mechanical Regulators
Top-quality American-made units feature heavy-duty shock
mounted steel bases, vibration-resistant internal wire connections,
fiber and mylar insulated pads, and large diameter contact
surfaces.
12-Volt Bosch-Style
Fits XLH from 65-66 and XLCH from 65-77.
12495
Black (repl. OEM 74511-65)�� $109.99
12492Chrome�� $109.99
12-Volt Delco-Style
Fits FL models from 65-69 and XLH from 67-77.
12493
Chrome (repl. OEM 74507-85T) �� $129.99
Generator Oil Filter
Adapter
FOOT
CONTROLS
HAND
CONTROLS
LIGHTING
This adaptor allows you
to install an oil filter in
place of the generator
on 36-69 motors as well
as our Pandemonium or
S&S Shovelhead engines
with generator/alternator
bottoms. Use OEM 63796-77A
or equivalent aftermarket oil
filter. Chrome finish.
632025 Generator oil filter adapter �� $114.99
6-Volt Delco-Style
Fits 54-64 KH, XL and XLH models, and 52-64 6-volt FL models.
18900
Chrome (repl. OEM 74508-85T) �� $109.99
ELECTRICAL
EXHAUST
INTAKE
ENGINE
Universal Voltage
Regulator Mounting
Bracket
Use front motor mounts and bolts.
25481
Fits custom applications
GASKETS
�� $31.99
Motor Factory Solid-State Regulator with
Chrome End Cover
American-made, solid-state regulator has screen-printed
circuit boards and ceramic components to lower operating
temperatures and insure longer life. Installs in minutes and
eliminates mounting problems.
28615
Fits all Sportster models from 65-77 and FL models from
65-69 with 12-volt generators ��$96.99
Chrome Rectifier
Regulator Mounting
Bracket
Fits rubber-mounted 5-speed
models from 80-03 (except
Dyna Glide models). This
reproduction steel bracket
has an extra set of holes
for a second mounting
position when relocating the
rectifier/regulator on custom
applications.
19283
TRANSMISSION
& CLUTCH
DRIVELINE
WHEELS
TIRES &
BRAKES
CHASSIS
SHEETMETAL
Motor Factory Generator Regulator with
Integral Charging Monitor
Regulator Brackets
These chrome brackets mount solidstate regulators on models with solidlymounted motors.
19261
Fits Big Twins including Softail
models from 76-86 (repl. OEMs 74533-75, 74534-80)�� $19.99
Cure electrical system reliability problems with the Motor Factory
solid state regulator with integral charging LEDs. It attaches
directly to the end of the generator and is enclosed in a die-cast
aluminum housing with polished fins on the end. Solid state
components are completely sealed in epoxy to eliminate moisture
and vibration problems giving completely reliable service. Green
and red LEDs give continuous readout of system performance.
Green wire to field, red wire to armature and black wire to battery.
Requires battery.
28092
Fits all Sportster models from 65-77 and FL models from
65-69 with 12-volt generators ��$114.99
5.33
INSTRUMENTS
& GAUGES
GENERAL
CROSS
REFERENCE
ELECTRICAL
Accel Generator Armature
This American-made 12-volt armature
features: heavy gauge copper wire windings;
precision- machined and finished shafts;
long-life, solid copper commutator and
heavy service lamination segments.
25502
Fits Sportster models from 65-81
and Big Twins from 65-69 (repl.
OEMs 30851-65A, 30851-86T)
Generator Brush Set by Standard
Replacement brush set for all two brush
generators from 58-64.
668343 Brush set ��$6.99
��$135.99
5
Chrome Generator End Cover Kit
This die-cast end cover is the perfect
finishing touch for the generator on both
stock and custom motorcycles. It installs
easily in minutes and fits all Sportster models
from 57-81 as well as 58-69 Big Twins.
28607
Replaces OEM 31081-83T�� $11.99
Generator Parts
Listed below in CC part number order
25306
Oil seal, end cover. Fits 61-73 Big Twin and Sportster models (repl. OEM 12002). Pack
of 5. Price each��$1.20
54061
Oil seal, drive gear. Fits 46-81 Sportster and Big Twin models (repl. OEM 30145-46A)
pack of 10 ��$1.10
660511 Gasket. Fits 58-E84 Sportster and Big Twin models (repl. OEM 30143-58). Pack of 10.
Price each��$0.45
660511
25306
54061
Accel Generator Brush Sets
Premium-quality, American-made generator brush sets for two- and
three-brush generators. Sets are pressure-molded and precisionground for long life from carbon-graphite. Retaining springs are
made from piano-grade tin music wire, with brass terminals fitted to
copper alloy braided cable leads.
CC
Part #
12341
5.34
Model
Price
Model Application
Year
$8.99 58-64 FL, FLH Twins, XL, XLH,
XLCH Twins
Generator Replaces
Type/Voltage OEM #
#58 & 61/6V 30426-58
Accel Generator Repair Kit
Top-quality American-made generator repair kit for 12-volt, 2-brush
generators. Fits FL models from 65-69 and Sportster models from 65-81.
Kit includes a pair of brushes, gasket, seal and packet of grease.
25515
Repair kit��$25.99
ELECTRICAL
APPAREL
SEATS &
BAGS
FOOT
CONTROLS
693840
HAND
CONTROLS
668420
LIGHTING
693841
All Balls Starters for Late-Model Twin Cams
ELECTRICAL
1.4kw gives your bike more cranking power. Starters are
manufactured with all new components and are backed by a
limited lifetime warranty. Available in either a chrome-plated or
black finish
Fits all 06-Up Dyna and 07-Up Softail and Touring models
693841Chrome��$359.99
693840Black��$299.99
668421
EXHAUST
INTAKE
All Balls 12V Generators
These premium units fit Big Twin and Sportster models. They
feature machine wound armatures, hardened shafts and premium
bearings are used throughout. Available in standard black finish
or show quality chrome. Fits 65-69 big twins and 65-81 Sportsters
with 12V systems.
668420 Generator 12V black��$139.99
668421 Generator 12V chrome��$177.99
ENGINE
GASKETS
030394
TRANSMISSION
& CLUTCH
All Balls Late Model Starters
Starters feature all new construction and are backed by a limited
lifetime warranty. Available in black or chrome/polished finish.
Starters include a special conversion jackshaft bolt that allows
these starters to fit all Big Twins from 89-05 (except 04-05 Softail
& Touring models).
030393 Semi-Gloss Black. 1.4kw rated�� $259.99
030394 Chrome/Polished. 1.4kw rated�� $346.99
030395 Chrome/Polished. 1.7kw rated (high output)�� $399.99
DRIVELINE
WHEELS
TIRES &
BRAKES
CHASSIS
All Balls Early Model Starters
New, up to date 1.4 KW designs that replace Hitachi and Prestolite
type starters. They are more compact, but generate twice the shaft
speed and 50% more power than the original versions. Available
in with black or chrome finishes. A great remedy for those hard to
start big-inch motors!
Black
030396 Hitachi starter (repl. OEM 31570-73) ��$249.99
030398 Prestolite starter (repl. OEM 31458-66TA)��$249.99
Chrome
030397 Hitachi starter (repl. OEM 31559-89T) ��$314.99
030399 Prestolite starter (repl. OEM 31463-88T) ��$314.99
SHEETMETAL
INSTRUMENTS
& GAUGES
PMGR 1.6 kW Starter for Early Big Twins by
Compufire
GENERAL
Permanent Magnet Gear Reduction (PMGR) Starter Motor for all
65-88 Harley-Davidson Big Twins. Mates to the OE starter gear case
and output shaft. 1.6 kW of cranking energy.
610328 PMGR starter��$369.99
5.35
CROSS
REFERENCE
ELECTRICAL
644212
Motor Factory Hitachi-Type
Starter Motors
The latest in starter technology performance
has been integrated in this starter. With
heavy duty bearings that provides better
reliability, and higher torque output for
dependable starts. Fits 73-88
644211 Black starter motor assembly (repl.
OEM 31570-73)��$112.99
644212 Chrome starter motor assembly
(repl. OEM 31559-89T)��$135.99
28606
Chrome starter motor end cover
(repl. OEM 31565-67) ��$10.99
5
Motor Factory High Torque Starters
The most common failure of starter motors is the starter clutch. The manufacturer of the
starter clutch is so confident on the reliability they are offering a lifetime warranty on the
starter clutch contained in all the Motor Factory starters. (Registration required)
• Other features include:
• Double-wound and balanced armatures
• Heavy-gauge field coils, and hi-temp welded carbon brushes
• Hi-temp grease and heavy-duty steel intermediate gears
• Solenoid coils are staked to withstand excessive vibration
• Life tested to Original Equipment specifications
• 25% more torque and RPM than Original Equipment 1.2kw starters while operating with a
stock specification or H-D OEM battery
Fit Big Twin Models from 94-06
644200 1.4kw raw finish�� $209.99
644202 1.4kw black finish (replaces OEM 31335-03)�� $234.99
644204 1.4kw chrome finish (replaces OEM 31559-99)�� $282.99
644208 1.8kw chrome finish, not for right side application �� $305.99
Fit Big Twin Models from 89-93
644201 1.4kw raw finish�� $209.99
644203 1.4kw black finish �� $234.99
644205 1.4kw chrome finish�� $282.99
644207 1.8kw chrome finish, not for right side application �� $305.99
644210
Motor Factory Prestolite-Type
Starter Motors
Reproductions of the Original Equipment
Prestolite electric starter motor used on
many models from 66-82. Chrome end cover
kit and replacement parts are also available.
644209 Black starter motor assembly (repl.
OEM 31458-66TA) ��$112.99
644210 Chrome starter motor assembly
(repl. OEM 31463-88T)��$135.99
28606
(repl. OEM 31565-67) ��$10.99
644215
BDL HighTorque Starter
Motor Factory Starters for Late-Model Twin Cams
1.4kw gives your bike more cranking power. Starters feature Motor
Factory lifetime starter clutch. Available in either a chrome-plated or
black finish.
644214Chrome��$354.99
644215Black��$305.99
5.36
Features a full
1.4kw rating, which
is up to 25% more
torque than Original
Equipment. Increased
cranking speed and
low amperage-draw design delivers fast, reliable starts with less
battery drain.
42847
Fits BDL Shovelhead 2” and 3" open belt drive kits 70-78
and 89-99 Big Twins (except Twin Cam 88 models)�� $312.99
ELECTRICAL
APPAREL
SEATS &
BAGS
640644
‘The Slugger’
FOOT
CONTROLS
HAND
CONTROLS
640643
LIGHTING
ELECTRICAL
47909
47900
EXHAUST
47901
High-Torque Starters by Terry Components
1.5 kw Starter for late Twin Cams by Terry
Components
Available in chrome or black finish
640685Chrome��$409.99
640686Black��$397.99
When the decision has been made to build that high-compression
or big-inch engine, besides considering a battery with higher cold
cranking amps and upgraded battery cables, there’s another motor
to be considered… namely the starter motor. Depending on the
compression, cam and ignition timing, the stock 1.2KW (1.4hp)
starter simply won’t cut it. Bigger motors need a high torque
starter. Most motors under 96ci should start easily with a 1.4 KW
(2.0 HP) starter motor. In the marketplace you can acquire 1.5 KW,
1.6 KW, 1.7 KW, 1.8 KW, 2.0 KW to turn over that big inch motor.
Which one do you choose? Terry Components made it simple and
a cost effective way to kick over that big inch motor with the right
choice using a 1.8 KW ‘The Slugger’ starter. This starter puts out
the same amount of torque as a 2.0 KW with less amperage drain.
Sometimes you just need to slug it out.
1.8KW ‘The Slugger’ Starters
• ‘Universal’ starters offer superior windings, high tolerance
heavy-duty clutch, and thicker commentators that resist flying
shorts
• Static balanced for smoother operation
• Low-profile design clears the electronic speedometer sender for
easy installation
• Puts out the same amount of torque as a 2.0KW with less
amperage drain
640644 Polished/Chrome for Big Twins from 89-93��$415.99
640645 Black wrinkle for Big Twins from 89-93��$395.99
640646 *Polished/Chrome for Big Twins from 94-06 (except 06 Dyna
Glide models)��$415.99
640647 *Black wrinkle for Big Twins from 94-06 (except 06 Dyna
Glide models)��$395.99
INTAKE
ENGINE
GASKETS
TRANSMISSION
& CLUTCH
DRIVELINE
WHEELS
TIRES &
BRAKES
CHASSIS
*Note: Installation of these starters on Touring models will require the additional
purchase of a CC #640643 Oil Pan Dipstick Adapter.
Oil Pan Dipstick Adapter for Touring Models
This adapter is required on Touring models from 93-06 when Terry
Components starters are installed.
640643 For use with 1.8KW ‘starters��$54.99
Fail-safe Pushbutton for Terry Components
Starters
Fail-Safe Switch. Use as a "backup" system or as a custom starter
button. Mounts on the end of the solenoid and installs in minutes.
For Terry Components 1.2 and 1.4 KW starters.
640687 Chrome Fail Safe Switch��$79.99
Replacement Parts for Terry Starters
47900
Solenoid repair kit (also fits most Original Equipment and
aftermarket Nippon Denso starters)��$30.99
47901
Starter brush holder for 1.4KW starters��$27.99
47902
Starter brush holder for 1.6KW and 2.0KW starters��$27.99
47909
Starter clutch for 1.2KW, 1.4KW and 1.8KW starters ��$102.49
47910
Starter clutch for 1.6KW and 2.0KW starters ��$122.99
5.37
SHEETMETAL
INSTRUMENTS
& GAUGES
GENERAL
CROSS
REFERENCE
ELECTRICAL
Replacement Starter Jackshaft Kits
Complete jackshaft kits include starter shaft, coupling, pinion gear, clips, spring,
locktab, washers and screws.
28380
10-tooth for Big Twins from 94-06 (except 06 Dyna) ��$89.99
628370 9-tooth for 94-06 Big Twins from when using a 66-tooth starter ring gear on
94-06 models ��$64.99
28381
9-tooth for Big Twins from 89-93��$89.99
Easy Starter Kits for Big Twin Models
Improves starting on high-compression big inch engines
through an improved starter-to-clutch basket gear
ratio. Complete kits include a clutch basket for Big
Twin models with a 66-tooth starter ring and a 9-tooth
starter pinion gear.
17664
Complete kit for Big Twin models from 94-97
5
�� $243.99
17665
Complete kit for Big Twin models from 98-06
(except 06 Dyna)�� $243.99
Replacement Parts
17448
Clutch basket with ring gear for CC #17664
Replacement Starter Motor Parts
Listed below in OEM part number order. All parts are sold each unless noted
otherwise.
28386
Pinion gear for Big Twins from 89-93 (repl. OEM 31342-90)��$23.99
28382
Coupling for Big Twins from 89-93 (repl. OEM 31548-90)��$9.99
28384
Extension shaft for Big Twins from 89-93 (repl. OEM 33127-90)��$25.99
688565 Starter shaft bushing 89-93 Big Twins OEM 33445-89 ��$6.99
688564 Starter shaft bushing 94-06 Big Twins (exc. 06 Dyna) OEM 33445-94A ��$7.49
92200
Starter shaft bushing for Big Twins from 89-93 (repl. OEM 33445-89)��$4.99
28383
Pinion coupling for Big Twins from 89-93 (repl. OEM 60647-90)��$14.99
�� $234.99
17663
23185
23183
Clutch basket with ring gear for CC #17665
�� $249.99
28678
66-tooth starter ring gear with hardware fits
only CC #17420 clutch basket and OEM 3770790 �� $55.99
9-tooth pinion gear��$22.99
Spyke Starter Jackshaft Kits
Includes starter shaft extension, couplings and components for complete starter
installation.
28678
Fits Big Twin models from 94-06 (except 06 Dyna) ��$91.99
28677
Fits Big Twin models from 89-93 ��$91.99
Compu-Fire 1084 Gear Set
Engineered to increase the starter motor torque by
lowering the gear ratio of the pinion gear to the clutch
ring gear. When used as a replacement for the 9:66 ratio
gear sets, a 15% increase in torque is obtained. Can also
be used as a re-placement for the weak 10:102 ratio gear
sets which are prone to breaking.
610302 Fits all Big Twins from 98-06��$163.99
3 5/8"
Spyke Grind-Free Jackshaft Kit
This Grind-Free jackshaft with 9 tooth pinion gear fixes the grind associated with
many 3“ open belt drives that utilize one-piece jackshafts. The grind-free is a
three piece unit with ramped teeth and enough flex to integrate seamlessly with
any belt drive.
683394 Fits Big Twin models from 94-06 with 3” open-belt drive�� $101.99
Starter Ring Gear
Replacement ring gear for the clutch drum. Fits electric
start Big Twins (except diaphragm clutch) from 65-E84.
17402
Replaces OEM 33163-65B��$56.99
5.38
Starter Shaft for Big Twins
28616
Starter shaft ONLY for 4-speed FL chain drive models from 70-82, and
4-speed FX chain drive models from 71-85 (replaces OEM 31482-70) ��$24.99
ELECTRICAL
28616
688720
28626
APPAREL
050434
SEATS &
BAGS
050437
28818
050443
FOOT
CONTROLS
25504
25531
HAND
CONTROLS
28074
LIGHTING
09778
ELECTRICAL
09779
09782
660518
28627
12082
EXHAUST
Replacement Starter Parts for Big Twin and Sportster Models
Listed below in CC part number order. Sold each unless noted otherwise.
09778
Starter housing bearing (replaces OEM 9062) sold each��$12.49
09779
Fits 4-speed Big Twin models with Hitachi motor 73-E79 (repl. OEM 31572-73) 10-24 threads (use CC #28625 bolts)��$44.99
09782
Fits 4-speed Big Twin models with Prestolite motor 65-E79 (repl. OEM 31465-65) 1/4-20 threads (use CC #28605 bolts)��$44.99
12082
O-ring, starter crank, 37-86 (replaces OEM 11101). Pack of 10. Price each��$0.30
25504
Starter drive (Accel) for all Big Twin models from 65-88, and Sportster models from 67-80 (replaces OEM 31443-65A). ��$54.99
25531
Starter drive for all Big Twin models from 65-88, and Sportster models from 67-80 (replaces OEM 31443-65A). Made in USA ��$36.99
28074
Needle bearing for Sportster models from 67-80, and FX and FL chain drive models from 65-84 (replaces OEM 9063)��$5.99
28616
Starter shaft ONLY for 4-speed FL chain drive models from 70-82, and 4-speed FX chain drive models from 71-85 (replaces OEM 31482-70)
INTAKE
ENGINE
��$24.99
28626
28627
Starter gear shift lever for all 4-speed Big Twin chain drive models from 65-84 (replaces OEM 31445-65A)��$8.99
Oil deflector plate for 4-speed FL chain drive models from 65-82, and 4-speed FX chain drive models from 71-85 (replaces OEM 60516-65A)
28811
688720
28818
Pivot screw, gear shift lever for inner primary cover on all 4-speed Big Twins from 65-86 (replaces OEM 31478-65A). Sold in 5 pack ��$49.99
Pivot screw, gear shift lever for inner primary cover on all 4-speed Big Twins from 65-86 (replaces OEM 31478-65A). Sold each��$49.99
Thrust washer, starter drive for all 4-speed Big Twins from 65-80 and Sportster models from 67-80 (replaces OEM 31502-65). Sold in pairs. Price
each��$3.50
Shifter collar starter shaft for all 4-speed Big Twin chain drive models from 70-84 (replaces OEM 31503-70)��$7.99
Snap ring for 4-speed FX and FL models from 65-88 and Sportster models from 67-80 (replaces OEM 11039). Pack of 10. Price each��$4.49
Thrust washer, starter drive for all 4-speed Big Twins from 65-80 and Sportster models from 67-80 (replaces OEM 31502-65). Made in USA. Pack
of 5. Price each��$4.20
Gasket (replaces OEM 60559-80). Pack of 10. Price each��$0.60
050434
050437
050443
660518
GASKETS
�� $7.99
TRANSMISSION
& CLUTCH
DRIVELINE
WHEELS
TIRES &
BRAKES
28626
CHASSIS
28627
SHEETMETAL
Starter Gear Shift Lever and Oil
Deflector Plate
Starter Motor Housings
Fit all Big Twin models with 4-speed transmissions and
rear chain drives from 65-84 (except 83-84 FL).
28626
Starter gear shift lever for all 4-speed Big Twin
chain drive models from 65-84 (replaces OEM
31445-65A) ��$8.99
28627
Oil deflector plate for 4-speed FL chain drive
models from 65-82, and 4-speed FX chain drive
models from 71-85 (replaces OEM 60516-65A)
��$7.99
Replacement starter motor housings that duplicate the Original Equipment
parts which commonly have the mounting ears broken off. Needle bearing
not included.
09782
Fits 4-speed Big Twin models with Prestolite motor 65-E79 (repl. OEM
31465-65) 1/4-20 threads (use CC #28605 bolts)��$44.99
09779
Fits 4-speed Big Twin models with Hitachi motor 73-E79 (repl. OEM 3157273) 10-24 threads (use CC #28625 bolts) ��$44.99
09778
Starter housing bearing (replaces OEM 9062) sold each��$12.49
5.39
INSTRUMENTS
& GAUGES
GENERAL
CROSS
REFERENCE
ELECTRICAL
668349
Starter Drive Clutch by Spyke
Stock replacement for OEM 31663-90. Fits
Big Twins from 90-05.
28960
Starter clutch (repl. OEM 31663-90)
��$91.99
Motor Factory Heavy Duty
Starter Drive
A typical starter drive gear contains five
rollers. This starter drive gear contains six
rollers providing a more reliable starter gear,
and less wear.
644213 Starter drive (replaces OEM 3144365A)��$23.99
668350
Standard Starter Solenoids
Solenoids for 4 speed and 5 speed Big Twins.
Starter Solenoid for Big Twin 4 Speed
65-81 Single Bracket
668349 Replaces OEM 71469-65B��$47.99
Starter Solenoid for Big Twin 5 Speed
80-86 Dual Bracket
668350 Replaces OEM 31489-79B��$55.99
5
Motor Factory Starter Clutch
644216
Starter Drive for XL Models by
Standard
Replacement starter drive for Sportsters.
Sold each.
668348 81-90 XL starter drive��$116.99
644206
Fits 06-Up Dyna, 07-Up Softail and
Touring models �� $130.99
Fits all 1.2 kw, 1.4 kw and 1.8 kw
on all Big Twin models from 90-05
25046
�� $115.99
668378
Starter Solenoids for 5-Speed
Models (Dual Bracket)
Chrome Solenoid Cover
Clean-up the looks of your bike with this
chrome cover for the starter solenoid.
25036
Fits all models from 89-06��$15.99
Accel starter solenoids for all 5-speed Big
Twin models from 80-88 (except Softail
models).
Accel Starter Solenoids
25045
Plain (repl. OEM 31489-79TB)��$62.99
668378 Black (repl. OEM 31489-79B)��$59.99
25046
Chrome (repl. OEM 31511-90T)
��$74.99
Heavy Duty Starter Drive
Beefier than the factory part for longer life
with high torque starters. Fits all electric
start models from 65-88 (except 81-88
Sportster models).
25531
Starter drive for all Big Twin models
from 65-88, and Sportster models
from 67-80 (replaces OEM 3144365A). Made in USA ��$36.99
668377
26430
Solenoid Cover Starter Button
Switches
Accel Starter Drive
This unit fits all electric start models from
65-88 (except 81-88 Sportster models).
25504
Starter drive (Accel) for all Big Twin
models from 65-88, and Sportster
models from 67-80 (replaces OEM
31443-65A). ��$54.99
5.40
Can be used as a “back up” system or as
a custom starter button without the need
for a starter switch on your handlebars. It
bypasses the stock relay, permitting starter
activation at the push of a hidden button.
Fits stock bikes and customs using late style
1.2kw, and 1.4kw output type starters.
640909Chrome��$29.99
640910 Black wrinkle finish��$29.99
Starter Solenoids (Single
Bracket)
A variety of imported or Accel starter
solenoids. Fit all Sportster models from 67-80
and Big Twins from 65-88 (with solenoid
mounted parallel to primary cover) including
all 4-speed models and all Softail models.
Accel Starter Solenoids
25003
Plain (repl. OEM 71469-65TB)��$54.99
668377 Black (repl. OEM 71469-65B)��$59.99
26430
Chrome (repl. OEM 71470-86T)
��$79.99
ELECTRICAL
APPAREL
SEATS &
BAGS
Solenoid Mounting Kit
Fits Big Twin models from 65-88 and
Sportster models from 67-80 with 2 hole
mounting tab. Includes mounting spacer
bolts and lock washers.
050419 Replaces OEM 31452-65��$3.99
FOOT
CONTROLS
Starter Terminal Boot
Spyke Solenoid Repair Kit
Includes plunger assembly and contacts. Fits
Big Twins from 89-06.
28961
Replaces OEM 31604-91 ��$34.99
Replaces OEM 70578-89 starter terminal
boot on 89-90 Big Twins and 93-13
Sportster models. Sold in packs of five.
688646 Starter terminal boots. Pack of 5.
Price each ��$1.50
HAND
CONTROLS
LIGHTING
ELECTRICAL
EXHAUST
Rubber Solenoid Cover
No adjustment needed to mount this triple
chrome-plated cover. It slides over the
solenoid and mounts with existing bolts to
the primary case. Fits all 4-speed Big Twins
from 65-86 and all Softail models from
84-88.
25026
Rubber solenoid cover for Big Twin
models.
25025
Replaces OEMs 31444-65A,
31475-77 ��$4.99
Starter Relay Cover
A chrome relay cover complete with
mounting spacers and screws that fits all
4-speed FL models from 65-84.
15154
ENGINE
25004
GASKETS
24998
TRANSMISSION
& CLUTCH
DRIVELINE
Starter Relays
Starter relays used on most models 73-93.
Chrome Starter End Cover
A simple-to-install chrome starter motor end
cover kit for all Sportster models from 67-80
and Big Twins with Hitachi or Prestolite
starters from 65-88.
28606
(repl. OEM 31565-67) ��$10.99
INTAKE
Fits the solenoid boot on Softail and 4-speed
FL/FX models from 65-88.
25040
Includes a new solenoid boot�� $21.99
Fits FL and FX models 73-79, Sportster
models 74-79 and all models 80-85 using
round plastic, terminal-style relay.
25004
Replaces OEM 71463-73A ��$26.99
WHEELS
TIRES &
BRAKES
Fits all models 80-93 using either a metal
or plastic square bodied ‘plug’ style relay.
24998
Replaces OEM 31506-79B��$17.99
CHASSIS
SHEETMETAL
Starter Solenoid Repair Kit
Repair kit for the electric starter solenoids
on all models from 65-88 (except 81-88
Sportster models).
25006
Replaces OEM 71465-85T�� $15.99
Solenoid Inner Boot
Rubber solenoid inner boot for all 65-88 Big
Twins and 67-80 Sportster models. Sold each.
25033
Replaces OEM 31441-65A ��$3.99
Micro
Starter
Relay with
Diode by
Standard
Motor
Products
INSTRUMENTS
& GAUGES
GENERAL
A replacement
for the Original Equipment micro-sized unit
fitted to all Big Twins from 00-14. Sold each.
17152
Replaces OEM 31522-00A ��$6.99
5.41
CROSS
REFERENCE
ELECTRICAL
17050
17152
17518
668347
Late Model XL Starter Relay by
Blue Streak
17060
Replacement starter relay for late model
Sportsters. Sold each.
668347 05-13 XL starter relay ��$13.99
17293
17059
17294
5
Standard Motor Products
Top-quality electrical parts for a wide variety of Harley-Davidson applications from the
manufacturer of Blue Streak Performance Products. Sold each.
Starter Relays
Fits all 80-99 models using a metal or plastic
square bodied ‘plug’ style relay.
17060
Replaces OEM 31506-79B�� $15.99
Same as CC #17060 but with an improved
‘weather-proof’ skirt to protect the connector
block.
17059
Replaces OEM 31506-79B�� $12.99
Fits FL and FX models 73-79, Sportster models
74-79 and all models from 80-03 using a round
plastic, terminal-style relay.
17050
Replaces OEM 71463-73A�� $33.99
Micro Starter Relay with Diode
A replacement for the Original Equipment
micro-sized unit fitted to all Big Twins from
00-14.
17152
Replaces OEM 31522-00A�� $6.99
Starter/Brake Light Relay with Diode
Works with starters on all models from 93-10,
and the brake light circuit on Touring models
from 91-10.
17518
Replaces OEM 31504-91A�� $10.99
Starter Relay Connectors with Pigtail
Harness
Connectors for use with CC #’s 17059 and
17060. Also fits CC #’s 17518 and 75218 relays if
orange wire is not used.
17293
Five lug�� $5.99
17294
Four lug �� $9.99
Circuit Breakers
17064
15 amp (repl OEM 74587-94)�� $9.99
17063
15 amp (repl. OEM 74589-73) �� $8.99
17062
30 amp (repl OEM 74599-77B) �� $6.99
617526 40 amp (repl OEM 74600-97A)�� $5.99
17061
50 amp (repl. OEM 74600-94) �� $9.99
19295
Circuit breaker clips/rivets. Pack of 10.
Price each. �� $2.30
Daytona Twin Tec Ignition
Power Relay Kit
This relay kit improves or eliminates
the voltage drop on big inch or high
compression motors with single fire
ignitions.
684962 Power relay kit��$19.99
17063
17062
17061
Standard Micro System Relay
A replacement for the original equipment
micro sized unit fitted for all big twins from
00-14
617525 Replaces OEM 31511-01A �� $9.99
617526
17064
Circuit Breakers by Standard
Hi-Low Beam Relay
Special 12-volt relay allows control of
the hi-low beam from one wire using a
momentary (horn type) button.
17729
Hi-Low Beam Relay��$34.99
5.42
Starter Relay
This starter relay replaces OEM 31506-79
and fits most Big Twin and Sportster models
from 80-99. Sold each.
688590 Starter relay 80-99 models (repl.
OEM 31506-79)��$9.99
Top-quality electrical parts for a wide variety
of Harley-Davidson applications from the
manufacturer of Blue Streak Performance
Products. Sold each.
17064
15 amp (repl OEM 74587-94) ��$9.99
17063
15 amp (repl. OEM 74589-73)��$8.99
17062
30 amp (repl OEM 74599-77B)��$6.99
617526 40 amp (repl OEM 74600-97A)��$5.99
17061
50 amp (repl. OEM 74600-94)��$9.99
19295
Circuit breaker clips/rivets. Pack of
10. Price each.��$2.30
ELECTRICAL
APPAREL
SEATS &
BAGS
681988
17719
‘VOES’ Switches
These are Original Equipment parts.
Replacement vacuum operated electric
switch.
75295
Fits Softail, FXR and Dyna Glide
models from 91-95 (repl. OEM
26566-91)��$51.99
75294
Fits Softail and 4-speed FX models
from 84-90 and Sportster models
from 86-93 (repl. OEM 26558-84)
��$51.99
75293
Fits FXR models from 84-90 and
Sportster models from 83-85 (repl.
OEM 26557-83)��$51.99
Circuit Breaker Clips
Reproductions of the stock zinc-plated
parts. Includes aluminum rivet. Used many
applications to hold the turn signal flasher
unit and the circuit breaker.
19295
Circuit breaker clips/rivets. Pack of
10. Price each.��$2.30
17720
Motoscope M-Flash Relay
• Incredibly small and lightweight - just a
cable with a tiny device the size of a mint
• Perfect for Custom Bikes with limited space
– no more clumsy OEM flasher relay
• Laying cables together with the m-Flash
inside a handlebar, frame tube or directly
on the wiring loom
• Completely load independent (wide-range
indicator relays) – always stable and correct
flash rate
• Suitable for all flasher types: LED, Micro
size, 10 Watt, or 21 Watt
• No bulky load resistors necessary
• It works with 1 or 2 or 4 flashers in use
• Instant, loss less flash light operation
• Very easy to install – just connect the two
wires
• Completely waterproof
• Short - circuit - proof
• Automatic overload shut down
• Safe against high voltage spikes
• Generates no heat during operation
• Operating voltage from 5V to 18V
• Also suitable for 6 V vehicle voltage
systems
• Made by motogadget in Germany
681988 MG RELAY m-Flash ��$31.99
FOOT
CONTROLS
HAND
CONTROLS
17727
LIGHTING
17728
ELECTRICAL
EXHAUST
Standard Toggle Switches
Toggle switches are a high quality parts
for custom applications.
17719
Small toggle switch on/off spade
terminal��$5.99
17720
Toggle switch 3 position 9” leads
INTAKE
��$21.99
17727 17728 Toggle switch 3 position spade
terminal�� $7.99
Toggle switch on/off screw
terminal��$4.99
ENGINE
GASKETS
TRANSMISSION
& CLUTCH
DRIVELINE
Electrical Junction Blocks
Universal connection blocks have brassnickel plated links and are rated for up to 30
amp loads. Available with four, six or eight
connection terminals.
17707
Four connections��$9.49
17706
Six connections��$12.49
17705
Eight connections ��$16.99
Standard Fuse and Socket
Kit comes with a 20 amp fuse and a
socket with 4” leads. Designed for custom
applications.
17702
Fuse and Socket��$3.99
WHEELS
TIRES &
BRAKES
Custom Chrome Handlebar
Wiring Extensions
Each of these kits contains all required wires,
heat shrink tubing, cable connectors, cable
cover and fitted terminals.
For all models 96-06 (except Touring
models) 12 wires
688666 4” Wiring extension �� $15.99
688668 12” Wiring extension�� $17.99
CHASSIS
SHEETMETAL
For all models 07-14 (except Touring models) 14 wires
INSTRUMENTS
& GAUGES
GENERAL
CROSS
REFERENCE
5.43
ELECTRICAL
Universal Barrel Crimper by Guerrilla Cables
These Universal Crimpers allow you to professionally crimp standard
Molex, Deutch, AMP/Tyco, & Delphi connectors as well as many
others, for use on wires ranging from 14-24 AWG. This is the perfect
tool for mechanics or for the “do it yourselfer”. A great alternative
to purchasing individual factory crimpers. Guerrilla Cables Universal
Crimpers are made in the USA.
664316 Universal barrel crimping tool �� $47.95
5
664301
664300
Ultimate CAN-Bus Bagger Harness by Guerrilla
Cables
• Harness extension for all 2014 FLHX, FLHR, FLHT/C/U and Screaming
Eagle Touring models
• Color coded to match OEM harness (Right Hand 5-Wire / Left Hand
4-Wire) and ready for soldering
• Main harness measures 24” with a 18” Throttle by wire & heated
grip harness for greater job flexibility
• Includes detailed wiring diagram
664317 Ultimate CAN-Bus Harness for 2014 Touring models ��$67.95
Xtra Length Bagger
Handlebar Wiring Harness
by Guerrilla Cables
• Harness for FLHR, FLHX, FLTR,
FLHT/C and FLHTCU models
• Color coded to match OEM wiring,
measures 36” in length
• Recommended for handlebars
18“ or longer, or with bars with
aggressive bends.
664303 Harness for 07-13 (26 wire)
36”�� $67.95
664304 Harness for 96-06 (24 wire)
36”�� $67.95
664304
Front Turn Signal Relocation Kit by Guerrilla
Cables
• Harness for handlebar mounted turn signals 11-Up Softail and
12-Up Dyna
• Color coded to match OEM wiring, 24” length for greater job
flexibility
• Includes detailed instruction sheet
• Also a great solution for Blackline models
664300 Softail turn signal relocation 24”��$36.95
664301 Dyna turn signal relocation 24”��$36.95
664315
664313
Ultimate Bagger
Handlebar Wiring Harness
by Guerrilla Cables
664305
5.44
• Harness for FLHR, FLHX, FLTR,
FLHT/C and FLHTCU models
• Ultimate harness measures 24”
with 18” Throttle by wire.
• Ultimate Xtra Length harness
measures 36” with 24” Throttle by
wire.
• Includes highly detailed custom
wiring diagram for TBW system
• Comes complete with Deluxe
bagger wiring harness
• Includes universal harness for
throttle by wire and heated grip
664305 Ultimate Xtra Length
harness 08-13 �� $96.95
664310 Ultimate bagger harness
08-13�� $76.95
664314
Premium Handlebar Harness Extensions by
Guerrilla Cables
• Harness extension for 12-Up Dyna models, 11-Up Softail models
and 2014 Sportsters
• Factory connectors and OEM wire specifications for exceptional
performance
• Color-coded to match OEM wiring (right hand 5-wire / left hand
4-wire)
• Measures 6”, 9”, 12”, or 15” in length: 100% Plug-n-Play
• Universal 20” harness also available for soldering unique
applications
664311 6” plug-n-play extension��$33.95
664315 20” universal extension ��$41.95
ELECTRICAL
APPAREL
664309
664308
SEATS &
BAGS
FOOT
CONTROLS
Deluxe Bagger Handlebar Wiring Harness by Guerrilla
Cables
• Harness for FLHR, FLHX, FLTR, FLHT/C and FLHTCU models
• Color coded to match OEM wiring, measures 24” in length
• Includes shrink tubing
664309 Deluxe bagger wiring harness 07-13 ��$52.95
664308 Deluxe bagger wiring harness 96-06 ��$52.95
HAND
CONTROLS
Throttle-by-Wire Harness for CAN-Bus
Touring Models by Guerrilla Cables
LIGHTING
• Throttle by wire extension for all 2014 FLHX, FLHR,
FLHT/C/U models
• Measures 18” long with OEM color coded harness
and ready for soldering
• Use with CAN-Bus plug-n-play harness #664311 thru
#664315 (sold separately)
• Includes detailed wiring diagram
664318 Throttle by wire extension harness for 2014
Touring models �� $34.95
664302
ELECTRICAL
EXHAUST
INTAKE
ENGINE
664307
GASKETS
TRANSMISSION
& CLUTCH
Extended Throttle by Wire Harness for SE models by
Guerrilla Cables
• Throttle by wire harness for 07-13 Screaming Eagle Touring models and 11-Up
Screaming Eagle Softails
• Throttle by wire and heated grip are 18” long with OEM color coded wires,
ready for soldering
• Use with Deluxe Bagger #664309 or Premium Harness #664314 (Plug-n-Play) or
#664315 (Universal)
• Includes highly detailed custom wiring diagram for TBW system
664302 SE Throttle by wire harness��$39.95
DRIVELINE
WHEELS
TIRES &
BRAKES
664306
CHASSIS
SHEETMETAL
Standard Extended Handlebar Wiring
Harness by Guerrilla Cables
Heavy-Duty Cable Ties
These heavy-duty black cable ties are made of NYLON 6 which has a tensile
strength of 75 lbs. and is heat-resistant to above 200° F. Sold in packs of 50.
55715514"-long��$2.99
55715528"-long��$4.99
557154811"-long��$7.99
• Harness for Dyna 96-11, Sportster 96-13 and Softail
96-10
• Color coded to match OEM wiring, measures 36” in
length
• Includes shrink tubing
664307 Extended wiring harness (14 wire) for 07-13
models �� $36.95
664306 Extended wiring harness (12 wire) for 96-06
models �� $33.95
INSTRUMENTS
& GAUGES
GENERAL
CROSS
REFERENCE
5.45
ELECTRICAL
664331
664335
664333
664336
664329
5
664338
664340
664330
664328
664327
664332
Molex Connectors by Guerrilla Cables
• These connectors are found on all 07-Up Harley Davidson
models. Environmentally sealed to keep out moisture and other
contaminants.
• Locking caps to ensure contact position and contact retention.
• Silicone seals that can withstand a wide range of ambient
temperatures.
• Optional removal tool available separately.
• Sold as a pair of (1) male & (1) female connector unless noted
otherwise.
Black Connectors
664331 3-position single row (repl. OEM 72512-07BK & 72511-07BK),
set ��$4.49
664333 4-position dual row (repl. OEM 72177-07BK & 72175-07BK), set
��$4.49
664335
664336
664338
664340
664330
6-position dual row (repl. OEM 72414-07BK & 72188-07BK), set
�� $10.99
8-position dual row (repl. OEM 72479-07BK & 72478-07BK), set
��$7.99
12-position dual row (repl. OEM 72487-07BK & 72488-07BK),
set ��$7.99
16-position dual row (repl. OEM 72166-07BK & 72177-07BK),
set �� $10.99
20-position dual row (repl. OEM 72500-07BK) single female
housing ��$6.99
664339
664337
664334
Grey Connectors
664332 3-position single row (repl. OEM 72514-07BGY & 72513-07GY),
set ��$6.49
664334 4-position dual row (repl. OEM 72444-07GY & 72415-07GY), set
��$5.99
664337
664339
664341
8-position dual row (repl. OEM 72469-07GY & 72447-07GY), set
��$7.14
12-position dual row (repl. OEM 72489-07GY & 72490-07GY),
set ��$9.49
16-position dual row (repl. OEM 72491-07GY & 72492-07GY),
set �� $11.99
Molex Connector Pins & Sockets (16-20 gauge) sold in packs
of 100
664327 Male terminal pins (repl. OEM #72169-07) �� $21.99
664328 Female terminal sockets (repl. OEM #72168-07) �� $19.99
Molex Cavity Plugs, sold in packs of 10
664329 Cavity plugs (repl. OEM #72473-07) ��$1.99
Molex Terminal Removal Tool
664326 Removes both pins & sockets�� $46.99
M664331
664326
5.46
ELECTRICAL
TM
APPAREL
SEATS &
BAGS
FOOT
CONTROLS
HAND
CONTROLS
664322
664321
664320
LIGHTING
BEFORE
ELECTRICAL
664325
664324
AFTER
664323
664319
JAE Housings & Terminals for CAN-Bus Systems
by Guerrilla Cables
For use with all CAB-Bus Systems in 14-Up Touring, 12-Up Dyna,
11-Up Softail and 14-Up Sportster models
664319 JAE 2-way socket housing & terminals (repl. OEM #72906-11)
��$7.95
664320
664321
JAE 2-way pin housing & terminals (repl. OEM #72905-11)$4.95
JAE 4-way socket housing & terminals (repl. OEM #72908-11)
664322
664323
664324
664325
JAE 4-way pin housing & terminals (repl. OEM #72907-11)$5.95
JAE seal plugs (repl. OEM #5118) pack of 5�� $4.95
JAE socket terminals (repl. OEM #72910-11) pack of 10�� $4.95
JAE pin terminals (repl. OEM #72909-11) pack of 10�� $4.95
�� $9.95
EXHAUST
DEI Protect-A-Wire
For a clean look that protects critical wiring and hoses from
heat. The DEI Protect-A-Wire is great for preventing hardening,
cracking or shorting. Constructed from high temp resistant glass
fiber material. Heat treated & saturated with an acrylic binder to
provide stiffness and frey resistance. Capable of handling direct
heat up to 500°F. Fuel & chemical resistant. Use when installing
turn signals, stereos, license plate relocation, auxiliary lighting, and
GPS units or whatever wiring you may need to protect. Includes
Military spec shrink tubing. Available in three different diameters.
Made in the USA.
660830 Black 10 feet Protect-A-Wire 5mm wide ��$14.99
INTAKE
ENGINE
GASKETS
TRANSMISSION
& CLUTCH
DRIVELINE
WHEELS
TIRES &
BRAKES
CHASSIS
SHEETMETAL
Terminal Pin/Receptacle Extractors
Accel 300+ Perma Crimp Tool
Used for crimping the ends on ignition wires. Features a precision
ratcheting action for application of the perfect amount of force. Fully
adjustable with 3 sets of replaceable crimping jaws for various tasks.
26919
Crimp tool��$96.99
Use with Molex style connectors on most models 80-13.
400376 Pin extractor��$40.99
400377 Receptacle extractor��$40.99
INSTRUMENTS
& GAUGES
GENERAL
CROSS
REFERENCE
5.47
ELECTRICAL
17902
25536
17901
Oil Pressure Switch
Quality replacement oil pressure switch
for XL and K models 54-76 and Big Twin
(except Evo) 41-84. Replaces OEM 2655272, sold each.
688594 Oil pressure switch (repl. OEM
26552-72)��$10.99
84899
658444
658445
Transmission Neutral Switches
25536
688635
5
Twin Cam Oil Pressure Switch
Oil pressure switch for all Twin Cam models
and V-rod models 02-Up. Sold each.
688635 Oil pressure switch (repl. OEM
26561-99)��$5.99
17902
17901
84899
658444
658445
Related
54132
54130
75520
Fits 4-speed FL models from 59-64 and FX models with ratchet top from late 73-early 79 as
well as Evolution Big Twin 87-97 and Sportster models 86-98 (repl. OEM 33900-59C)��$7.99
Fits 4-speed FL models with ratchet top from 65-E78 (repl. OEM 71507-65) ��$15.49
Fits 4-speed FX models with ratchet top from 71-E73 (repl. OEM 71507-71)��$17.99
Fits 4-speed Big Twin models with ‘pancake’ top from 79-86 (repl. OEM 33901-79) ��$12.99
Fits 5-speed Twin Cam Softail models from 00-06 and Dyna Glide models from 01-05 and
Touring models 01-06 (repl OEM 33904-00) ��$11.99
Fits Softail models from 98-99 and Touring and Dyna Glide models from 99-00 (repl. OEM
33902-98)��$12.49
Parts
Fiber gasket for models from 36-79 (repl. OEM 25811-11). Pack of 10. Price each. ��$0.40
Nylon gasket for models from 80-98 (repl. OEM 33043-80). Pack of 10. Price each.��$0.30
Connector for neutral light switch (repl. OEM 9905). Pack of 10. Price each. ��$1.30
668346
Twin Cam Oil Pressure Switch
by Standard
Designed for use on all Twin Cam engines
and 03-Up V-Rods. Sold each.
668346 TC oil pressure switch��$9.99
Transmission Neutral Light
Switch
This neutral switch is required when using a
RevTech 6-speed transmission or gear set on
all models 98-99. Switch restores function of
neutral indicator light.
30439
Neutral light switch��$14.99
25460
25464
Accel Oil Pressure Switches
American-made units with heavy-duty
contacts, brass ferrule, thermoplastic
insulator and a bright finish.
Fits Sportster and K models from 54-76 and
Big Twins from 41-84 (except Evolution
models).
25460
Replaces OEM 26552-72��$15.99
Fits Sportster models from 77-03
25463
Replaces OEM 26554-77��$16.99
Fits Evolution Big Twin models from 84-99
(except models with electric oil pressure
gauge)
25464
Replaces OEM 26561-84��$13.99
5.48
ELECTRICAL
26447
APPAREL
26448
26440
25506
SEATS &
BAGS
25505
Accel Hydraulic Brake Switches
Top-quality Accel rear brake light switches
for most models. They feature heavy-duty
HAND
contacts and brass terminals.
CONTROLS
Fits ServiCar from 51-73 and 58-70 FL
models.
25505
Replaces OEM 72002-51A ��$15.99
26429
26435
Chrome Replacement Stop Light Switches
Stamped steel construction and heavy-gauge support plates. Ideal for replacing worn stock
parts during a restoration project or when building a ground-up full custom.
26447
Fits FX, FXE and FXS models 73-77 (repl. OEM 72005-73A) push-off style��$15.49
26448
Fits Sportster models 75-76 (repl. OEM 72004-75) pull-on style��$11.99
26435
Fits Big Twin models 37-57, 45" WL models 37-57 and Servicars 37-50 (repl. OEM 7200334T) pull-on style��$22.99
26440
Fits Sportster models 67-74 (repl. OEM 72004-70T) push-off style ��$10.99
26429
Fits Sportster and K models 52-66 (repl. OEM 72004-52) push-off style��$10.99
17716
17715
Universal Stop Light Switch
Sold on a display card of 10, or individually.
12287
12288
Card of 10 ��$55.99
FOOT
CONTROLS
Hydraulic Brake Switches
Top-quality hydraulic rear brake light
switches for most models. Heavy-duty
contacts and quality brass terminals.
Fits Big Twin models from 71-13 (except
73-77 FX), and Sportster models from 79-03.
17716
Big Twin 71-Up (except FX 73-77) &
Sportster 79-03 (repl. 72023-51A)
Fits Big Twin models from 71-Up (except
08-Up Dyna models), and Sportster models
from 79-03.
25506
Replaces OEM 72023-51A ��$15.99
LIGHTING
ELECTRICAL
EXHAUST
INTAKE
Goodridge Brake Light Switch
Hydraulic switch features wire leads
for your stoplight. Fits most Big Twin
and Sportster models. Ideal for many
applications (7/8" hex with 1/8" NPT
thread)
27052
Goodridge brake light switch
ENGINE
�� $9.99
GASKETS
TRANSMISSION
& CLUTCH
��$12.49
Fits ServiCar from 51-73 and 58-70 FL models.
17715
Replaces OEM 72002-51A ��$10.49
Brake Light Switch Banjo Bolt
by Goodridge
Banjo bolt with pressure switch built into
it. Simplifies the rear brake by eliminating
the tee and pressure switch and creating a
single brake line system. Sold Each.
141373/8"-24�� $22.49
141387/16"-24�� $20.99
Handlebar Light Switch
Mounts to any 1" handlebar. Duplicates
original-style, inside handlebar-wired switch
perfectly.
25534
DRIVELINE
WHEELS
TIRES &
BRAKES
CHASSIS
SHEETMETAL
Vulcan Engineering Starter
Switch
Universal 1" Handlebar
Combination Switch
This push button starter switch fits all of
the Vulcan Engineering coil brackets and is
made in the USA. It is a 15 amp switch with
15/32-32 UNS threads.
668126 Starter push button switch ��$14.99
High-lo beam switch with kill or horn button.
25991Chrome��$10.99
INSTRUMENTS
& GAUGES
Handlebar Button Switch
Mounts to any 1" handlebar. Two-wire
style, and designed to run wires through
the handlebar for horn or starter.
25533
Replaces OEM 71800-26TA �� $9.99
GENERAL
CROSS
REFERENCE
5.49
ELECTRICAL
25535
Heavy-Duty Electronic Ignition
Switch
5
Side Hinge Ignition Switch
Chrome side hinge ignition switch with
barrel style key. Fits FXDWG 93-11; Softail
models 96-10; and Road King models 94-13.
Includes two keys.
17717
Replaces OEMs 71501-93 and 7131396��$42.99
Totally electronic switching eliminates
the troublesome pole-to-bar contacts of
Original Equipment switches. The 6-pole
terminal pattern is highly-resistant to
vibration and corrosion. Includes two
reversible keys and both the early and latestyle ignition switch caps.
26455
Fits all models from 36-95 (except
Dyna Wide Glide models)�� $28.99
Convertible Ignition Switch
5-post ignition switch and lock assembly
complete with both styles of caps.
25535
Ignition switch (repl. OEM 7150036TA)��$22.99
Replacement Ignition Switch Cap
Late die-cast style. Includes pins. Pack of 10.
25538
Switch cap��$4.60
Mini Ignition Switch
Chrome Ignition Switches
Heavy-Duty Ignition Switch
A top-quality, heavy-duty ignition switch
for all Softail, FXWG and FL models from
73-95 (except Dyna Wide Glide models). Also
compatible with all of our custom six post
switch dash covers.
25540
Ignition switch (repl. OEM 7150173T)��$28.99
Fits Sportster models 75-77 and FX models
73-77.
12251
Ignition switch (repl. OEM 70124-75)
Two position mini ignition switch for custom
applications. Includes two keys. Sold each.
688193 Mini ignition switch �� $39.99
��$22.99
Fits FX models from 78-85, Sportster models
from 78-93 and FXR models from 82-93.
12286
Ignition switch (repl. OEM 7142577T)��$22.99
15103
49211
49212
Late Style Ignition Switch
Assemblies
Switch assemblies feature round tumbler
style keys for added security and simple
hook-ups.
12943
Universal Switch Plates
Doss Switch Mount Housing
This ignition key switch housing is intended
to be welded to your frame.
62344
Fits custom applications��$33.99
Sold on a card of 12. Price each.
15103
Key switch bracket ��$5.00
12943
Single mount hole��$4.58
Note: Must use CC #12286 ignition switch.
5.50
Fits Sportster models from 75-03, FXR
models from 82-99, Dyna Glide models
(except FXDWG) from 91-03, and FX models
from 73-03 (except FXWG and FXST) as well
as custom applications.
49211
OEM-style barrel key ignition
switch, replaces OEM 71428-90B
�� $27.99
Replacement for Dyna Glide models (except
FXDWG) from 91-93 as well as many custom
applications.
49212
Replaces OEM 71421-90�� $28.99
ELECTRICAL
APPAREL
SEATS &
BAGS
FOOT
CONTROLS
HAND
CONTROLS
LIGHTING
Doss Horn Kits
In minutes, upgrade your standard-style horn to the custom look of
these Rick Doss-designed, complete horn and cover combinations.
Replace your standard-style horn for a custom look, or use in
addition with your existing horn for an extra margin of safety.
High-impact, chrome-plated or black, ABS plastic cover with
universal fitment, 12 volt, 3 1/2” diameter horn.
46394
Chrome single wing horn �� $46.54
660759 Black single wing horn�� $29.99
Chrome Horn Covers
Set it off in style and add a custom touch to your bike with these
creative horn cover kits. Available in 4 designs: Iron Cross, Flames,
Skull, and Flaming Skull. Each one includes a new, black mini horn,
and fits most models with vertical motor mount horn from 91-13.
Sold each.
609990 Iron cross ��$92.99
609991Flames��$92.99
609992Skull ��$92.99
609993 Flaming skull��$92.99
6099089POW/MIA��$92.99
Note: Requires horn bracket (OEM 69120-91)
ENGINE
28151
28150
GASKETS
Horn Covers
Chrome-plated replacement horn covers.
Fits low note horns on Sportster models 76-85, and FX models from
76-80.
28150
Replaces OEM 69140-76T�� $14.99
TRANSMISSION
& CLUTCH
Fits high note horns on Big Twins from late 76-90, and 76-85
Sportster models
28151
Replaces OEM 69017-76T�� $14.99
DRIVELINE
Fits Sportster models from 93-94 and Softail or FLT models from
93-03.
28154
Replaces OEM 69012-93 (not shown)�� $22.99
Two terminal horn comes
equipped with a universal
adjustable mounting bracket.
19892
Chrome horn�� $10.99
EXHAUST
INTAKE
Fits Sportster models from 86-92 and Softail or FLT models from
91-92.
28153
Replaces OEM 69012-86A (not shown)�� $22.99
Deluxe Chrome Horn
with Adjustable
Mount
ELECTRICAL
WHEELS
TIRES &
BRAKES
CHASSIS
SHEETMETAL
INSTRUMENTS
& GAUGES
Custom Horn
Chrome Bulb Horn
An oldie, but a goodie.
For the rider who has to
have all the gadgets.
129447"-long��$7.99
Excellent for use on custom
bikes or as a stock replacement.
Universal mounting bracket is
included. 4"-diameter.
350133 12 volt ��$17.99
GENERAL
CROSS
REFERENCE
5.51
ELECTRICAL
Mini Horn
Electric Horn
Early-style 12-volt electric horn
with chrome grill. This heavyduty, top-quality horn has a
universal mount and can be
used in many applications.
28120
Horn and grill��$29.99
Small zink-plated two
terminal horn packs a
powerful sound and
measures 2 1/2" in
diameter.
19891
Mini horn�� $5.49
5
Universal Horn with
Cover
This 12-volt horn features
a universal mounting
bracket and a removable
chrome-plated, injectionmolded cover. Can be used
in custom applications and
has spade-type terminals.
31506
Universal horn ��$20.99
Twin Electric Horns
High decibel (115dB) chrome horn set. Includes relay, universal
brackets and hardware. Ideal for motorcycles where space is limited.
12528
Twin electric horns��$31.99
Custom Horn
Cover for
Sportster
Models
Cover snaps over
stock horn on
XLH 883 models
from 86-93 and
XR 1000 models
from 83-84. Replaces OEM 39038-88T
350109 Horn cover ��$7.99
5.52
ELECTRICAL
APPAREL
SEATS &
BAGS
370320
Mega Battery Cables
All Balls ‘Ultra Flex’ Battery Cables
• Increase starter performance by supplying maximum battery
current to the starter motor
• 4-gauge cable manufactured with pure electrolytic grade,
36-gauge tinned copper strands for maximum current transfer and
flexibility
• Specially rated 125° C, oil and gas resistant, ultra flexible
translucent jacket guarantees excellent performance
• Sold each
37032010"-long��$12.99
37032112"-long��$16.99
37032214"-long��$19.99
37032316"-long��$21.99
37032425"-long��$29.99
These super-flexible battery cables are computer-grade with 1,660
strands encased in a silicone jacket. They house over 9 times the
wire of stock cables which have only 180 strands of wire. The
number of smaller gauge wires in the cable makes it much more
flexible and capable of delivering more current. The lugs are
twice the thickness of standard lugs and are made from 99% pure
electroplated copper, then 24k gold-plated to provide a positive
connection with greater conductivity. Kits contain the lengths
needed for specific applications.
Mega Cable Kits
647549 Fits Softail models from 08-13. Includes a 6” ground cable
and a 10” battery-to-starter cable��$42.99
47521
Fits Softail models from 89-07. Includes a 10" ground cable
and a 12" battery-to-starter cable��$42.99
47520
Fits Softail models from 84-88. Includes an 8" ground cable,
a 17" battery-to-solenoid cable, and a 15" solenoid-to-starter cable��$62.49
47522
Fits 4-speed FL models from 65-79. Includes a 9" ground
cable, a 16" battery-to-solenoid cable and a 16" solenoid-tostarter cable ��$62.49
647546 Fits 07 Touring models. Includes a 17" ground cable with an
8" auxiliary wire, and a 13" battery-to-ground wire.��$46.95
647547 Fits 08 Touring models. Includes a 14" ground cable with a
1/4" bent, 45 degree lug and a 9" auxiliary wire, and a 10"
battery-to-starter cable with a 1/4" bent, 45 degree lug.
FOOT
CONTROLS
HAND
CONTROLS
LIGHTING
ELECTRICAL
EXHAUST
INTAKE
��$45.95
647548
647550
18930
647551
18932
Battery Cables and Terminal Kits
18930
18932
8"-long with 1/4" holes (repl. OEM 70209-65A) ��$12.99
15"-long with 1/4" and 3/8" holes (repl. OEM 70069-65A) ��$12.99
Fits Touring models from 09-13. Includes a 13" ground cable
with a 1/4" bent, 45 degree lug and a 5" auxiliary wire. The
positive cable is a 9" with a 1/4" bent, 45 degree lug and a
5" auxiliary wire.��$48.95
Fits Dyna models from 06-13. Includes 9”, 12” and 14” cables
��$62.99
ENGINE
GASKETS
Fits Sportster models from 04-13. Includes 12” and 13”
cables ��$42.99
Individual Mega Cables
Black insulation with copper lugs.
475307"��$13.99
475319"��$17.99
4753211"��$22.49
4753313"��$27.49
4753415"��$31.99
4753517"��$36.49
4753625"��$49.49
TRANSMISSION
& CLUTCH
DRIVELINE
WHEELS
TIRES &
BRAKES
Motor Factory Battery Cable Sets
Stock replacement battery cables. Available as a set of one each
positive and negative battery cable.
CHASSIS
Fits Touring models from 93-06 (negative
cable replaces OEMs 70042-97, 70267-04,
positive cable replaces OEMs 70377-97,
70377-97A)
668035 . Sold in a set��$29.99
Fits Dyna Glide models from 91-03 (negative
cable replaces OEM 70103-96, positive cable
replaces OEM 70102-96)
668037 . Sold in a set ��$29.99
Fits Dyna Glide models from 04-05 (negative
cable replaces OEM 70284-04, positive cable
replaces OEM 70102-96A)
668039 . Sold in a set ��$29.99
Fits Sportster models from 91-06 (negative cable replaces OEM
70079-94, positive cable replaces OEM 70079-94)
668038 Sold in a set��$29.99
5.53
SHEETMETAL
INSTRUMENTS
& GAUGES
GENERAL
CROSS
REFERENCE
ELECTRICAL
Motor Factory Batteries
• Manufactured in the USA to
uncompromisingly high standards since
1979.
• All Motor Factory batteries come with a
standard one year warranty
• All Motor Factory batteries have the
latest battery technology offered in the
marketplace
• We offer two types of batteries that
cover a wide range of model fitment
from 67up, at several price points
High-Performance Maintenance Free Batteries
•
•
•
•
•
All are factory activated.... just take it out of the box and put it in your bike
Increased conductivity for higher starting wattage, increased vibration resistance
High puncture resistant separator for increased service in high vibration applications
Advanced lead-calcium technology pumps up starting power
Sulfation retardant dramatically reduces battery-killing plate sulfation. This means they will
last up to three times longer than conventional batteries
• More CCA’s (Cold Cranking Amps) than their Original Equipment equivalents
5
To maximize battery performance and starting power reliability we recommend you check
your battery cables periodically and replace when needed. To maintain your Motor Factory
battery to its fullest performance potential we recommend putting your battery on a trickle
charge daily. Motor Factory provides affordable stock replacement battery cables (CC #’s
668035 thru 668039).
Motor Factory Battery Application Chart
Fitment
Standard Battery
• Meets or exceeds Original Equipment
specifications in its class
• Through-the-wall intercell connector
minimizes internal resistance, while
maximizing power
High-Performance
Maintenance-Free
97-Up FLT, FLHT, FLHX, FLHR, FLTR & Trike Models
84-96 FLT, FLHT, FLT MODELS
65-84 FLH, FLT, FLT (4-Speed Models) & 67-78 Sportster
91-Up Softail, Dyna, 97-03 Sportster, 07-Up V-Rod
Models
84-90 Softail, 80-00 FXR, 71-86 FX (Electric Start) &
79-96 Sportster Models
71-72 FX (Kick Start Models) & 70-78 Sportster
02-06 VRSC, V-Rod Models
04-Up Sportster Models
Buell X1, S3/T & M2
Buell S2/T, RR1200, RS1200, RSS1200 & RR1000
Buell 00-11 XB9R/S, XB912R/S, S1 & Blast Models
Standard
(without
acid)
666107
666106
666101
666105
666104
666100
666102
666103
666105
666104
666102
Motor Factory Battery Cross Reference
Part #
Price
Yuasa Ref#
HarleyDavidson
OEM #
Cold
Cranking
Amps
Length
Width
Height
High-Performance Maintenance-Free
$81.99
YTX14
666102
65948-00A
200
6
3 7/16
5 3/4
666103
$84.99
YTX14L
65958-04A
200
6
3 7/16
5 3/4
666104
$101.99
YTX20H
65991-82B
310
6 7/8
3 7/16
6 1/8
666105
$101.99
YTX20HL
310
6 7/8
3 7/16
6 1/8
666106
$116.99
YTX24HL
65989-97C,
65989-90B
66010-82B
350
8 1/8
3 7/16
6 3/8
666107
$128.99
YIX30L
66010-97C
385
6 9/16
5
6 7/8
Standard (comes without acid)
$44.99
12N7-4A
666100
66006-70
74
5 5/16
3
5 1/4
YHD-12H
66007-84
300
8 1/8
5 1/4
6 1/2
666101
5.54
$97.99
Configuration
ELECTRICAL
Magna Power the Perfect Motorcycle Battery
APPAREL
The Magna Power AGM Battery was designed for more than performance,
it was designed for the enthusiast. Completely spillproof and leakproof;
frequent replacement and high maintenance are over! The absorbed
glassmat (AGM) technology increases power while improving rider and
environmental safety. The key to this technology is the highly porous
microfiber separators which completely absorb and trap the electrolyte.
Molded top and side connection terminals provide versatility, increased
strength and durability. The Magna Power AGM Battery provides the most
advanced power and value in the industry, so your customers can enjoy
their leisure time, worry free. Premium quality, specially designed Absorbed
Glass Mat batteries are manufactured under strict quality controls to assure
superior performance and long life. The AGM design allows easy installation
without the worry of acid spills and damage to equipment.
WORRY FREE...
• No vent tube
• No acid leaks to cause terminal corrosion
• Withstands damaging effects of vibration
• Environmentally friendly, 100% recyclable
MAINTENANCE FREE...
• No filling
• No activation
• Eliminates low water levels
• Low discharge rates for off season storage
SEATS &
BAGS
FOOT
CONTROLS
HAND
CONTROLS
LIGHTING
ELECTRICAL
EXHAUST
Magna Power Battery Application Chart
Fitment
High-Performance Agm Maintenance-Free
97-Up FLT, FLHT, FLHX, FLHR, FLTR & Trike Models
685337
84-96 FLT, FLHT, FLT Models
685625
97-Up Softail, Dyna, 97-03 Sportster & 07-Up V-Rod Models
685336
91-96 Softail And Dyna Models
685335
84-90 Softail , 80-00 FXR, 71-86 FX (Electric Start) & 79-96 Sportster Models
685334
685624
688899
Buell X1, S3/T & M2
685336
Buell S2/T, RR1200, RS1200, RSS1200 & RR1000
685334
Buell 00-11 XB9R/S, XB912R/S, S1 & Blast Models
685624
INTAKE
ENGINE
GASKETS
TRANSMISSION
& CLUTCH
Magna Power Battery Reference Chart
Part#
Price
Yuasa Ref#
685334
$127.99
685335
DRIVELINE
Cold
Cranking
Amps
275
Length
Width
Height
YB16BCX
Harley
Davidson
OEM #
65991-82B
6 7⁄8
4
6 1⁄8
$127.99
YB16HL-A-CX
65989-90B
275
6 7⁄8
4
6 1⁄8
685336
$128.99
YTX20LBS
65989-97C
270
6 7⁄8
3 7⁄16
6 1⁄8
685337
$154.99
YIX30L
66010-97C
365
6 5⁄8
5 3⁄16
6 7⁄8
685624
$114.99
YTX14-BS
65948-00A
200
5 7⁄8
3 7⁄16
5 3⁄4
685625
$139.99
Y50-N18L-A-CX
66010-82B
330
8 1⁄8
3 9⁄16
6 3⁄8
688899
$114.99
YTX14L
65958-04A
200
5 7⁄8
3 7⁄16
5 3⁄4
Configuration
WHEELS
TIRES &
BRAKES
CHASSIS
SHEETMETAL
INSTRUMENTS
& GAUGES
GENERAL
CROSS
REFERENCE
5.55
ELECTRICAL
YUASA Batteries
Yuasa has been manufacturing motorcycle batteries in the
USA since 79 and is the largest manufacturer of motorcycle
batteries in the USA. All Yuasa batteries feature the
following:
• Patented sealed post and heat-sealed case to cover prevent acid
seepage, reduce corrosion and give the battery extra strength.
• Polypropylene cover and container assure reserve electrolyte
capacity for cooler operating temperatures and gives greater
resistance to gas, oil and impact in extreme weather conditions.
• Thru-partition construction provides shorter current path with
less resistance than 'over the partition' construction, giving more
cranking power.
• Special grid design withstands severe vibration, assuring
maximum conductivity.
5
YUASA GYZ Series Battery
• Heavy duty, flush mount terminals that can resist extreme
vibrations.
• ‘Factory Activated’ with a longer life span
• Improved charge recovery and a higher capacity
YuMicron CX Batteries (does not come with acid)
• YuMicron CX was the first small engine battery to use "lead
calcium" technology
• 5% to 8% more cold cranking amps than YuMicron battery.
• Reduces water loss to about one-eighth that of lead-antimony
batteries.
High Performance Maintenance Free Batteries
• Up to 30% more cranking power than YuMicron thanks to radial
griddesign and additional plates
• Lasts up to three times longer than conventional batteries
• Plus all the outstanding features of a maintenance free battery!
YuMicron Batteries (does not come with acid)
• High technology separators allow two extra plates per cell for a
30% improvement in cranking performance over a conventional
battery.
Maintenance Free Batteries
• Sealed Valve Regulated Lead Acid battery never needs refilling
• Absorbed Glass Mat (AGM) technology eliminates water loss
• Spill-proof design means virtually no possibility of leaks
• Advanced lead-calcium technology pumps up starting power
• Holds voltage longer and needs less charging when battery is in
standby or storage conditions
• Shipped dry with high gravity electrolyte (except CC #2831647,
which is factory sealed and charged)
Conventional Batteries (does not come with acid)
• These workhorse batteries are designed specifically for
applications requiring operation on uneven surfaces and vibrating
environments.
Yuasa Factory Battery Application Chart
Fitment
Gyz-Series
97-UP FLT, FLHT, FLHX, FLHR, FLTR &
Trike Models
84-96 FLT, FLHT, FLT Models
65-84 FLH, FLT, FLT (4-Speed Models)
& 67-78 Sportster
97-Up Softail, Dyna, 97-03 Sportster,
07-Up V-Rod Models
91-96 Softail & Dyna Models
84-90 Softail, 80-00 FXR, 71-86 FX
(Electric Start) & 79-96 Sportster
Models
71-72 FX (Kick Start Models) & 70-78
Sportster
Buell X1, S3/T & M2
Buell S2/T, RR1200, RS1200, RSS1200
& RR1000
Buell 00-11 XB9R/S, XB912R/S, S1 &
Blast Models
MT500
SS (Except SS350), SX, TX & Z Models
5.56
HighPerformance
AGM
MaintenanceFree
618003
AGM
MaintenanceFree
Yumicron Cx
(does not
come with
acid)
Yumicron
(does not
come with
acid)
Conventional
(does not come
with acid)
2831647
2831669
2831468
2831443
618000
2831668
2831560
618001
2831667
2831565
618004
618002
618000
618001
2831668
2831667
2831391
2831465
2831371
2831281
2831179
2831363
2831289
2831172
2831172
2831489
2831682
2831560
2831565
2831489
2831665
ELECTRICAL
Yuasa Battery Cross Reference
Part #
Price
Yuasa #
Harley-Davidson
OEM #
Cold
Cranking
Amps
Length
Width
Height
Gyz Series
$154.99
618000
GYZ20HL
65989-97C
310
6 7/8
3 7/16
6 1/8
618001
$154.99
GYZ20H
65991-82B
310
6 7/8
3 7/16
6 1/8
618002
$123.99
GYZ16HL
65958-04A
240
6
3 7/16
5 3/4
618003
$197.99
GYZ32HL
66010-97C
500
6 9/16
5
6 7/8
618004
$123.99
GYZ16H
65948-00A
240
6
3 7/16
6 7/8
High-Performance Maintenance-Free
$139.99
YTX24HL-BS
2831669
66010-82B
350
8 1/8
3 7/16
6 3/8
YTX20HL-BS
65989-97C
310
6 7/8
3 7/16
6 1/8
65991-82B
310
6 7/8
3 7/16
6 1/8
210
5 5/16
3 1/2
6 9/16
2831668
$120.99
2831667
$120.99
YTX20H-BS
2831665
$109.99
YTX14AHL-BS
Maintenance Free
$159.99
2831647
YIX30L
66010-97C
385
6 9/16
5
6 7/8
2831560
$114.99
YTX20L-BS
65989-97C
270
6 7/8
3 7/16
6 1/8
2831565
$114.99
YTX20-BS
65991-82B
270
6 7/8
3 7/16
6 1/8
2831489
$95.99
YTX14-BS
65948-00A
200
6
3 7/16
5 3/4
2831682
$95.99
YTX14L-BS
65958-04A
200
6
3 7/16
5 3/4
Yumicron Cx (does not come with acid)
$99.99
YB16-B-CX
2831465
65991-82B
255
6 7/8
4
6 1/8
2831391
$99.99
YB16HL-A-CX
65989-90B
255
6 7/8
4
6 1/8
2831468
$104.99
Y50-N18L-A-CX
66010-82B
275
8 1/8
3 9/16
6 7/16
66006-70
124
5 5/16
3
5 1/4
Yumicron (does not come with acid)
$43.99
YB7-A
2831281
2831363
$64.99
YB14L-A2
190
5 5/16
3 1/2
6 9/16
2831371
$79.99
YB16-B
65991-82B
240
6 7/8
4
6 1/8
2831443
$119.99
YHD-12
66007-84
240
8 1/8
5 1/4
6 1/2
74
5 5/16
3
5 1/4
74
5 5/16
3
5 1/4
Conventional (does not come with acid)
$44.99
12N7-3B
2831172
2831179
$43.99
12N7-4A
66006-70
Configuration
SEATS &
BAGS
FOOT
CONTROLS
HAND
CONTROLS
LIGHTING
ELECTRICAL
EXHAUST
INTAKE
ENGINE
GASKETS
TRANSMISSION
& CLUTCH
DRIVELINE
Battery Terminal Cover Kit
Includes spacers and terminal covers.
2831629 Sold each��$5.99
Replacement Battery Hardware
APPAREL
Special lead coated hardware resists acid corrosion and rust.
2831635 14mm nut and bolt set��$1.99
2831636 12mm nut, bolt and spacer set��$1.99
Rubber Battery Straps
Duplicates of the Original Equipment parts. Sold each.
25032
Fits 5-speed Touring models from 80-92, Softail models from
84-93, and 77-79 Sportster and XLCR models (repl. OEM
66105-77)��$5.99
300157 Rear strap for 93-10 Softail models (repl. OEM 66111-93)
�� $5.99
300158
WHEELS
TIRES &
BRAKES
CHASSIS
Front strap for 93-10 Softail models (repl. OEM 66109-93)
��$5.99
SHEETMETAL
INSTRUMENTS
& GAUGES
GENERAL
CROSS
REFERENCE
5.57
ELECTRICAL
91297
‘Riveted’ Battery Covers
5
Chrome-plated covers with extra nonfunctional buttonhead rivets for that
high-tech “racers only” look. These covers
complement our complete line of other
‘Riveted’ covers.
37258
Fits 4-speed FX models with electric
start from 73-86 (except Softail
models) and all Sportster models
from 82-03��$27.99
Battery Cover and Tray Kits
Available in two different configurations.
We offer kits with covers only which include
the side and top covers including the hold
down strap, or with both covers, the strap
and the tray.
Kit With Cover
91298
Fits 73-86 4-speed FX models (except
FX Softail models) ��$35.99
Kit With Cover and Tray
91297
Fits 73-86 4-speed FX models (except
FX Softail models) ��$92.99
Battery Cushions
High-quality pure neoprene closed-cell
foam rubber. Includes a 4" x 6 1/2" pad
for the battery tray, and two 2" x 1" pads
for the top cover.
18940
Fits FX and FXR models from 73-10
and electric start Sportster models
from 79-03��$3.99
Includes a 5 3/16" x 8" pad for the battery
tray, and three 2" x 1" pads for the top
cover.
18942
Fits 4-speed FL models from 65-84
and Sportster models with large
electric start batteries from 67-78
��$2.99
18941
‘Cut-your-own kit’ for custom applications. Includes one 5" x 8" pad
��$3.99
18939
26376
18929
Fits Softail models from 84-96 (repl.
OEM 66210-85B) ��$6.99
Fits Softail models from 97-99 ��$6.99
Stainless Steel Battery HoldDown Straps
26019
Battery Covers for 4-Speed FL
Models
Show-chrome battery covers. Fit 4-speed FL
models from 70-84. Available in two styles,
choose the one which suits your taste.
26019Plain ��$19.99
26376Louvered ��$23.99
18-gauge stainless steel with stainless eye
bolts and nuts.
25029
Fits FL models from 70-84 (repl.
OEM 66383-70T)��$11.99
25028
Fits electric start Sportster models
from 67-78 (repl. OEM 66470-67)
��$12.99
25030
25031
688077
Fits FX and Sportster models with
kickstart only from 70-78 (repl. OEM
66470-70T)��$11.99
Fits electric start 4-speed FX models
(except Softail models) from 73-86
and all Sportster models from 82-97
(repl. OEM 66476-73T)��$11.99
26088
26085
26375
Replacement chrome battery carriers
Include battery pad, rubber mounting
studs, brackets and all required mounting
hardware.
26479
Fits electric start FX models from
73-78 (repl. OEM 66191-73)��$55.99
26086
Chrome Battery Top Covers
12296
Battery Covers forSportster and
FX Models with Electric Start
Complete with cell viewing window. Fit all
FX 4-speed electric start models from 73-86
(except Softail models) and all Sportster
models from 82-03.
12296
Chrome plain battery cover ��$17.99
688077 Black plain battery cover��$19.99
26375
Chrome louvered battery cover
26085
26086
688084
26088
Fits 4-speed FL models from 65-84
CHROME ��$14.99
CHROME ��$13.99
BLACK��$12.99
Fits electric start Sportster models
from 67-78 CHROME��$17.99
��$20.99
5.58
Chrome Battery Carrier Trays
Battery Overflow Catch Tank
Prevents acid overflow damage while still
properly venting the battery. Includes a
catch tank made from high-impact plastic
which measures 4"-tall x 3/4"-thick, two
reusable cable ties and a 24"-long piece of
clear tubing.
18943
Fits all models��$4.99
ELECTRICAL
APPAREL
12269
SEATS &
BAGS
15204
FOOT
CONTROLS
12265
HAND
CONTROLS
Yuasa 12-Volt 900 mA
Automatic Battery Charger
12268
651304
Battery Carrier
12265
12269
12268
15204
651304
Tall 6-volt hold-down rods (repl.
OEMs 66390-58, 66393-58) ��$10.99
Battery top plate (repl. OEM 6637354TA)��$15.99
Battery bottom plate (repl. OEM
62575-36)��$24.99
Battery plate bracket (repl. OEM
62585-36)��$7.99
Battery plate bracket (repl. OEM
62584-58)��$33.99
Yuasa Jumper Cables
• Heavy duty, 8 foot, 8-gauge cables will
not stiffen or freeze
• Tangle-resistant, encased rubber grips for
safer use
2831656 Jumper cables��$25.99
• Fully automatic three level charge
cycle for effective charging: Bulk
Charge - concentrated charging power;
Float Mode - maintains full charge
indefinitely; Pulse Mode Technology peaks battery capacity which enhances
battery life
• Reaches 14.4-volt peak, then
automatically switches to float
• Reverse polarity protection, spark-free
operation and designed to prevent
overcharging
• Battery accessory lead and fused ring
connectors included
• Two year warranty
2831649 12-volt 900 mA charger��$36.99
LIGHTING
ELECTRICAL
EXHAUST
INTAKE
ENGINE
GASKETS
TRANSMISSION
& CLUTCH
DRIVELINE
WHEELS
TIRES &
BRAKES
CHASSIS
SHEETMETAL
INSTRUMENTS
& GAUGES
GENERAL
CROSS
REFERENCE
5.59
ELECTRICAL
Battery Tender is a revolutionary charger that
charges any 12 or 6-volt lead-acid or gel battery
and keeps it at full charge forever, WITHOUT
DAMAGING OR DESTROYING THE BATTERY! It is
NOT a trickle charger. Just hook it to a battery
and forget it. Comes with alligator clips and
quick disconnect connections.
Battery Tender
Waterproof Chargers
• Spark-proof, even when the
leads are touched together
• Reverse polarity protected
– will not damage charger if
hooked up incorrectly
• Easy to install and use
• Safe in all weather conditions
• Will safely charge and
maintain any size 12-volt battery
though 200 amp-hour capacity
• Safe and easy to use on all lead acid batteries
• Solid-state two color LED indicates start of charge
Battery Tender Waterproof Chargers
2851024 For USA and Western Hemisphere ��$52.99
Replacement Parts
2851015 Alligator clip-style quick connect harness (sold each)��$7.49
2851016 Black fused grommet-style quick connect harness (sold each)
5
��$7.49
Battery Tender Junior Chargers
Battery Tender Plus 1.25A (High Efficiency)
• Input voltage: 100 to 240Vac, 50/60Hz (World Wide)
• Output: 12Vdc nominal, 1.25A
• 4-step charging qualification, bulk, absorption, float
• Short circuit protected and spark proof
• Reverse polarity protection
• Replaces Battery Tender Plus CCI #2851001 in the Ca. Market
• Agency Approvals: UL/CSA, CE, PSE
• Listed in California Appliance Efficiency Database
652141 Ca. High Efficiency Battery Tender plus��$69.99
Battery Tender Junior is a 750 MA, lightweight, compact trickle
charger with a brain. Ideal for those hard-to-fit spots.
• Fully automatic two stage battery
charger perfect for all lead-acid,
sealed maintenance-free and gel
cell batteries
• After reaching peak 14.4 VDC,
charge automatically switches to
13.2 float voltage
• When voltage drops below 12.6
VDC, charging resumes at 14.4
VDC
• Two color LED indicates state of
charge
• Reverse polarity pyrotected and
spark proof 12-foot output cord
Battery Tender Junior
2851011 Single Output 12-Volt��$39.99
Replacement Parts
��$7.49
Battery Tender Junior
(High Efficiency)
• Input voltage: 120Vac, 60Hz
(North America Only)
• Output: 12Vdc nominal,
750mA
• 4-step charging qualification,
bulk, absorption, float
• Short circuit protected and
spark proof
• Reverse polarity protection
• Replaces Battery Tender Junior CCI #2851011 in the Ca. market.
• Uses state-of-the-art power conversion circuitry not found in any
other battery charger
• Agency Approvals: UL 1236/CSA C22.2 No. 107.2_01 through ETL
• Listed in California Appliance Efficiency Database
652140 Ca. High Efficiency Battery Tender Junior��$39.99
Battery Tender Plus
Battery Chargers
The Battery Tender Plus is
a 1.25 amp battery charger
designed to fully charge a
battery and maintain it at
proper storage voltage without the damaging effects caused by
trickle chargers.
• Upgraded circuitry
• Temperature compensated to ensure optimum charge voltage
• Automatically switches from full charge to float mode
• Complete three–step charging program: bulk charge, absorption
mode, float mode
• Reverse polarity protection to ensure user safety
Battery Tender Plus
Replacement Parts
��$7.49
5.60
ELECTRICAL
APPAREL
SEATS &
BAGS
Quick Disconnect Plug USB Charger
FOOT
CONTROLS
• Plugs directly into Battery Tender and most quick disconnect
battery harness.
• 2.1A maximum output current, allows for charging a variety of
electronics including large tablets.
652142 Quick disconnect USB charger ��$11.99
HAND
CONTROLS
LIGHTING
Quick Disconnect Plug with LCD Display
• Plugs directly into Battery Tender and most quick disconnect
battery leads
• The LCD displays battery voltage when the button is pressed
• Display voltage range is 3 to 16V, resolution is +/_ 0.1 volt
• The red LED flashes when voltage is low
• The green and yellow LEDs operate only when the button is
pushed
• Voltage levels Red: less than 11.6V, Yellow: 11.6 to 12.0V, Green:
greater than 12.0V
652144 QDC plug with LCD display�� $16.95
ELECTRICAL
Battery Tender 12-Volt 2-Bank and 4-Bank
International Chargers
These international Battery Tender charging stations work
anywhere in the western hemisphere, or Europe! Designed to fully
charge a battery and maintain it at proper storage voltage without
the damaging effects caused by trickle chargers.
• Features 2 or 4 independent charging systems and 12 volts at
1.25 amps per station
• Weighs less than 3 lbs.!
• Operates anywhere in the world (100-240 VAC 50/60 Hz.)
• Microprocessor controlled constant current charging
• Complies to all International safety standards
• Perfect for all AGM, sealed maintenance free and flooded
batteries
• Optional 25 ft. extension leads available
• Features 2 year warranty!
Battery Tender 4-Bank Chargers
Battery Tender 2-Bank Charger
Battery Tender Accessory Bag
This bag will accommodate the Battery Tender Junior or the Battery
Tender Plus including all connectors and accessories.
2851017 Accessory bag�� $5.99
Optional Leads
2851022 25 ft. extension lead (each)��$14.49
2851023 4-pack of 25 ft. extension leads��$13.00
EXHAUST
INTAKE
ENGINE
GASKETS
TRANSMISSION
& CLUTCH
DRIVELINE
WHEELS
TIRES &
BRAKES
Battery Tender
Required for
‘Odyssey’ Batteries
This compact on-board
charger is designed to
fully charge a battery and
maintain it at proper storage voltage without the damaging effects
caused by trickle chargers. It’s easy to use, and fits in tight places
because it weighs only 21 oz. and measures 5"-long x 4.5"-wide x
2"-tall. 2 year warranty.
• Advanced Microprocessor Circuitry that correctly charges any type
of lead acid or sealed maintenance-free battery
• Charges any size (capacity) lead-acid battery
• Reverse polarity protection and water repellent circuitry
• Complete three-step charging program (bulk charge, absorption
mode, float mode)
Battery Tender Chargers for Odyssey Batteries
15285
For USA and Western Hemisphere ��$125.99
CHASSIS
652791
652790
SHEETMETAL
Battery Tender Solar Charger
• Exclusive panel design with built in 3-step automatic
microprocessor controlled solar battery charger
• 12V nominal current
• Spark proof
• Weight and Dimensions 5 watt charger (270 mAmps) 17,5”l x
2,5”w x 17,5”h / 3 pounds
• Weight and Dimensions 10 watt charger (540 mAmps) 17,5”l x
3”w x 30”h / 5.5 pounds
652790 5 watt charger ��$79.99
652791 10 watt charger��$114.99
5.61
INSTRUMENTS
& GAUGES
GENERAL
CROSS
REFERENCE
ELECTRICAL
ARC AUDIO
ARC AUDIO
654460
654467
654465
5
654461
654466
654464
654468
XDi Series Speakers by Arc Audio
Designed and engineered by Arc Audio’s own in house speaker
development team, the XDi speaker line gives users the optimum
balance of quality materials, advanced motor design and the
best possible combination of acoustical considerations at an
affordable price.
654464 XDi 1.0 tweeters��$58.99
654465 XDi 5.2 component speakers 5.25”��$178.99
654466 XDi 6.2 component speakers 6.5”��$198.99
654467 XDi 502 coaxial speakers 5.25”��$98.99
654468 XDi 602 coaxial speakers 6.5”��$118.99
654469 XDi 693 coaxial speakers 6”x9” ��$158.99
ARC AUDIO
654462
654463
5.62
Mini Amplifiers by Arc Audio
Small enough to mount in the bags of your bike but big enough to
deliver the punch that will rock your ear drums.
KS125.4 specs:
• Power output RMS @ 4 ohms 4 x 75 watts
• THD <.05% @ 4 ohms
• S/N Ratio (A wtg.) >109 dB
• Bass Boost +15dB @ 45 Hz
• Crossover (Butterworth) 40Hz-500Hz 12dB
• Size 11 5/8” (L) x 5 1/8” (W) x 1 3/4” (H)
KS500.1 specs:
• THD <.05% @ 4 ohms
• S/N Ratio (A wtg.) >102 dB
• Bass Boost +15dB @ 45 Hz
• Crossover (Butterworth) 30Hz-200Hz 24dB
• Size 11 5/8” (L) x 5 1/8” (W) x 1 3/4” (H)
654460 KS125.4 mini amp, 4 channel��$448.99
654461 KS500.1 mini amp for subwoofer ��$448.99
MOTO Series Speakers by Arc Audio
You can’t go wrong with these hi-performance speakers
from Arc Audio, whether you choose the coaxial or
component version.
Moto 602 specs:
• Diameter 6.5”
• Max power 160 watts
• Nor. Power 75 watts
• Sensitivity 86dB
• Frequency response 70Hz – 20KHz
• Impedance 4 Ohms
Moto 6.2 specs:
• Diameter 6.5”
• Max power 240 watts
• Nor. Power 90 watts
• Sensitivity 86dB
• Frequency response 65Hz – 20KHz
• Impedance 4 Ohms
654462 Moto 602 speakers ��$338.99
654463 Moto 6.2 speakers��$448.99
ELECTRICAL
ARC AUDIO
APPAREL
HD Wiring Kit by Arc
Audio
SEATS &
BAGS
• Designed by trained HD
technicians
• Includes everything needed to
hook up the KS125.2BX Mini amp
to a factory fairing
• Includes Velcro mounting pads
• Included in all MPAK audio kits
• Plug & play design
• Radio input loading resistors built
into the harness for fault free
operation
654457 Arc Audio wiring kit
FOOT
CONTROLS
643231
HAND
CONTROLS
��$44.99
LIGHTING
ARC AUDIO
ELECTRICAL
643230
654458
EXHAUST
Replacement Fairing & Speaker Support
Brackets
Speaker Adapter Rings by Arc Audio
HD 6.5” Speaker adapter rings mount to the factory 5.25” speaker
location on batwing fairings and Road Glide fairings. Smooth
contour funnel design allows for increased performance and midbass
response. Sold in pairs.
654458 Speaker adapter rings 6.5”��$44.99
Heavy-Duty replacement fairing and speaker support brackets. Sold
in pairs.
643231 Heavy-Duty fairing support brackets for 96-13 FLHT/C/U/X
models (Replaces OEM #58478-96B & 58479-96B)��$54.99
643230 Heavy-Duty speaker support brackets for 96-13 FLHT/C/U/X
models (Replaces OEM #58938-96B & 58939-96B)��$24.99
INTAKE
ENGINE
GASKETS
ARC AUDIO
TRANSMISSION
& CLUTCH
654453
DRIVELINE
WHEELS
TIRES &
BRAKES
CHASSIS
SHEETMETAL
Motorcycle Performance Audio Kits by Arc Audio
These comprehensive kits come with everything needed to upgrade your stock audio system. They come in different stages to satisfy your
personal audio needs. All kits include amp, speakers, installation manual and wiring harness.
654450 M.P.A.K.1, KS125.2BX Mini amp, 5.25” Coaxial speakers�� $398.99
654451 M.P.A.K.2, KS125.2BX Mini amp, 5.25” Component speakers �� $468.99
654452 M.P.A.K.3, KS125.2BX Mini amp, 5.25” Coaxial and 5.25” Component speakers �� $558.99
654453 M.P.A.K.4, KS125.2BX Mini amp, 6.5” Coaxial speakers and rings�� $498.99
654454 M.P.A.K.5, KS125.2BX Mini amp, 6.5” Component speakers and rings �� $548.99
654455 M.P.A.K.6, KS125.2BX Mini amp, Hi-performance 6.5” Coaxial speakers and rings �� $698.99
654456 M.P.A.K.7, KS125.2BX Mini amp, Hi-performance 6.5” Component speakers and rings�� $798.99
5.63
INSTRUMENTS
& GAUGES
GENERAL
CROSS
REFERENCE
ELECTRICAL
602270
5
602271
Road Captain Fairing by Dead Center Cycles
Transform your Dyna or Sportster with Dead Center Cycles “Road
Captain” batwing fairing. Whether it’s added protection you’re after,
or full stereo sound, this fairing was designed to give you options.
Features:
• Styling proportioned specifically for Dyna and Sportster models.
• Light and strong, fairing is made from thick ABS.
• No need for paint. Fairing is finished in gloss black.
• Requires model specific bracket kit, sold separately.
• Requires windshield, sold separately (accepts any OEM windshield
with current 3 hole pattern).
Fairing
602321 Road Captain fairing with stereo �� $999.99
602320 Road Captain fairing without stereo �� $699.99
Dead Center Quick Detach Fairing
Enjoy excellent wind protection, good looks and premium
stereo sound on the open road with the flexibility to convert in
seconds to the wind in your face when you arrive. On compatible
Harley models, the Dead Center Fairing gives you quick-detach
convenience with the additional security of a barrel lock.
Innovative mounting brackets (patent pending) guide the fairing
back into the docked position quickly and easily when it comes
time to pack up and hit the open road again. Full touring comfort
and the stripped down look you bought the bike for in the first
place. Available with a Sony stereo pre-installed or without stereo
so you can install your own components.
• Meticulous fiberglass construction in gloss black gel-coat with
polished stainless brackets
• Powerful stereo system with audio 6 1/2” speakers.
• Harley models latch onto the bike automatically when attached,
lockable with the turn of a key
• Custom wiring harness with sealed, easy to use thumb-release
connectors
• Harley models attach/detach in seconds without tools utilizing
stock windshield mounts
• Fits 94-Up Harley Davidson Road King, most 00-Up Harley-Davidson
FL Softail
Fits Road King Models from 94-Up
602080 Detachable fairing kit with stereo pre-installed ��$1,699.99
602081 Detachable fairing kit without stereo ��$1,349.99
Fits FLST Softail Models from 00-Up
602082 Detachable fairing kit with stereo pre-installed ��$1,699.99
602083 Detachable fairing kit without stereo ��$1,349.99
Adapter Kit for FLSTF Fatboy Models
This kit is required when installing CCI #602082 & 602083 detachable
fairing kits onto your 00-Up FLSTF models (without passing lamps)
602085 Fairing adapter kit for 00-Up FLSTF models ��$27.99
5.64
Note: Handlebar mounted turn signals need to be relocated for visibility. Inner Fairing will
not work with all handlebar configurations. Brackets in polished stainless
Polishes Stainless Steel Bracket
602322 Fits 91-05 Dyna (except FXDWG), 88-94 FXR and 88-15 Sportster
models with top mount headlights�� $167.99
602323 Fits 99-09 XL Custom and 12-15 XL 72 models with bottom
mount headlights �� $157.99
602324 Fits 10-15 XL Custom�� $157.99
602325 Fits 10-15 XL ’48�� $157.99
602326 Fits 93-05 FXDWG and 84-13 FXST/C/B and Blackline models
�� $157.99
602327
602328
602329
602330
Fits 06-15 FXD/B and 06-13 FXDL models�� $157.99
Fits 14-15 FXDL models�� $167.99
Fits 06-15 FXDWG models�� $157.99
Fits 13-15 Breakout models�� $157.99
Brackets in black stainless
602331 Fits 91-05 Dyna (except FXDWG), 88-94 FXR and 88-15 Sportster
models with top mount headlights�� $127.99
602332 Fits 99-09 XL Custom and 12-15 XL 72 models with bottom
mount headlights �� $117.99
602333 Fits 10-15 XL Custom�� $117.99
602334 Fits 10-15 XL ’48�� $117.99
602335 Fits 93-05 FXDWG and 84-13 FXST/C/B and Blackline models
�� $117.99
602336
602337
602338
602339
Fits 06-15 FXD/B and 06-13 FXDL models�� $117.99
Fits 14-15 FXDL models�� $127.99
Fits 06-15 FXDWG models�� $117.99
Fits 13-15 Breakout models�� $117.99
Wind Screens
602341 Road Captain windshield 7” light tint �� $109.99
602342 Road Captain windshield 7” dark tint �� $109.99
602340 Road Captain windshield 5” dark tint �� $109.99

Electrical - Rollies Speed Shop

Transcription

Similar documents

engine - TRB

Exhaust - TRB

customchrome.com FIND A DeALer NeAr You customchrome.com

Rail Road FinalApproved NoLogo 13-11

lighting - TRB

Geartek email brochure

CLASSIC 1978 GMC ROYALE W

Cole Hersee High Amp Master Key Switch

Risky Business