Snow plough control Driver`s cab Handbrake

Transcription

Snow plough control Driver`s cab Handbrake
Handbrake
Driver’s cab
The compartment of the new Euro 5 Vehicle
features a new design with a central console.
The cabin features a state-of-the-art design,
built with rustproof composite materials and
with an electrical tilting mechanism.
The standard version comes with an array of
accessories, such as: electrical window lifters,
centralised door locking and can be fitted with a
car radio and height adjustable steering wheel.
As well has having a flood lamp and
prearranged for additional headlamps, the
Winter service version can also be fitted with
heated windscreens and mirrors.
The mechanical handbrake with
hydraulic unlocking device acts
directly and simultaneously on the
rear wheel grips and the drive shaft.
Hydraulic supply is controlled by a
central pump.
Snow plough control
The joystick control of the snow plough
is extremely precise and intuitive. The
central hydraulic pump, in constant
operation, ensures oil supply in all
situations.
Guaranteed power
The new Euro V category Iveco
engine with particle filter supplies
146 HP to a torque of 370 Nm at
just 1400 rpm, which combines with
the 3000 cc displacement ensure a
large power reserve in any operating
situation.
Particle filter
Fitted as standard on all versions,
it drastically reduces emissions in
compliance with the latest Euro V
directives, namely the 2008/74/EC
ref 2005/55/EC line B2.
3° handbrake
Steering
A new handbrake has been added in
conjunction with the two rear wheel
brakes in order to ensure total safety in
the most extreme situations.
The steering gears are controlled by a
hydraulically assisted ZF gearbox with variable
gear ratio connected crosswise to the wheel.
The front semi-axles with oil-bath homokinetic
joints are fully encapsulated in the wheels
in order to ensure maximum protection in all
operating conditions.
All-wheel drive
The BONETTI reduction gear
designed with cutting-edge solutions
is controlled by an electronic control
unit that distributes the drive torque on
both axles thanks to the central third
differential.
Sturdy chassis
Total protection
The main chassis, consisting of two stringers
and cross members with a variable section,
ensures a high torsional rigidity which is
suited to fit the crane behind the driver’s cab
and the snow ploughs at the front.
The strategic position of the rear lamps and
the rear crossbar facilitate tilting operations
for the driver. All the vehicles are rustproof
and fitted with rear mudguards and stainless
steel diesel tank.
EURO 5
4x4
Characteristics and technical data
VERSIONS
MODEL
FX100/35E5 FX100/50E5
BODY
3.500
5.000
TIPPER
TIPPER WITH CRANE
FX100/35E5 FX100/50E5
FX100/35E5 FX100/50E5
G.V.W.
Kg. 3.500
5.000
3.500
WIDTH
mm WHEELBASE
mm 2.220 - 2.550
2.550
HEIGHT
mm 2.100
2.450
LENGTH
mm 1.650
4.005 - 4.335
4.270 - 4.600
4.670
LENGTH WITH SNOW PLOUGH mm 4.340 - 4.670
4.720
TIPPER PLATFORM LENGTH
mm 2.590 - 2.920
2.450
PLATFORM GATE HEIGHT
mm 400
400
CARGO Kg. 1.400 (1.380)
2.880 (2.860)
CARGO “WINTER SERVICE” VEHICLE Kg. TOTAL WEIGHT TIPPER
5.000
1.100 (1.090) 2.580 (2.570)
645
2.140
1.045 (1.035) 2.525 (2.515)
590
2.085
Kg. 3.500
CRANE CARGO
990 Kg at 2,7 mt.
OPEN CRANE CARGO
400 Kg at 5,2 mt.
Measurements in brackets refer to the 2550 mm pitch.
MIN SPEED (TORQUE)
Km/h MAX SPEED
Km/h 115
90
2,7
115
90
115
Standard colours
RAL 2011
RAL 3002
RAL 1021
RAL 9010
RAL 5015
90
EURO 5
4x4
comfort and driving safety.
Bonetti F100x 4x4
represents the sturdy, reliable and
leading-edge solution for loose looking
for an extremely compact and yet
powerful vehicle, capable of dealing
with any multipurpose task.
The new F100x is the result of Bonetti’s
over 10 years of experience in 4x4
vehicles for special purposes.
Just 1650 mm
Thanks to the special feature, the
concealed mirrors, external dimensions
are extremely contained, just 1650 mm
in width.
All the data contained in this brochure are for information only and without responsibility.
Bonetti reserves the right to make any modification without prior notice.
EURO 5
4x4
BONETTI srl
Via Toscana 25/27
20060 Vignate (MI) Italia
Tel. +39.02.9566334
Fax +39.02.9560667
www.bonetti4X4.it
Retailer
EURO 5
4x4
Suitable for all situations
Since 1974…
Special 4x4 vehicles at the service of Private
and Public clients.
Thanks to years dedicated to research, the
experience gained with previous productions
and the constant collaboration of its clients,
the Bonetti family aspires to continual
improvement over time.
Sturdy chassis, reduced dimensions, absolute
The new kinematic chain, fitted with a third
differential gear, transmits maximum power
to the rear wheels in all working conditions.