Global Guide PDF

Transcription

Global Guide PDF

WESCO’s Global Guide
Supplier Partners
Safety
More Products.
More Brands.
Extra-Effort Service.
Visit or Call:
Your Local
WESCO Branch
See the Branch
Locator at:
www.wesco.com
© Copyright 2012
WESCO Distribution, Inc.
All Rights Reserved.
Printed in the USA.
51899/0912
Enclosures, Fittings,
& Grounding
Wire & Cable
1st Edition 2013/14
WESCO International, Inc. (NYSE: WCC), a publicly traded Fortune 500
holding company headquartered in Pittsburgh, Pennsylvania, is a
leading provider of electrical, industrial, and communications
maintenance, repair and operating (“MRO”) and original equipment
manufacturers (“OEM”) product, construction materials, and advanced
supply chain management and logistic services. 2011 annual sales
were approximately $6.1 billion. The Company employs approximately
7,500 people, maintains relationships with over 18,000 suppliers, and
serves over 65,000 active customers worldwide. Customers include
commercial and industrial businesses, contractors, government
agencies, institutions, telecommunications providers and utilities.
WESCO operates eight fully automated distribution centers and
approximately 400 full-service branches in North America and
international markets, providing a local presence for customers and a
global network to serve multi-location businesses and multi-national
corporations.
Conduit, Boxes,
& Raceway
WESCO Global Guide • Mining and Oil & Gas Industries
That’s the WESCO difference.
Whether you call or visit one of our
approximately 400 Branches
(supported by eight North American
Distribution Centers), you’ll find the
electrical and general MRO products
you need — fast and ready to ship.
Lamps & Lighting
Wiring Devices
Circuit Breakers
& Fuses
Transformers &
Electrical Distribution
Tools, Testers,
& Equipment
Industrial Maintenance
Supplies
Data Communications
WESCO Delivers
Welcome!
Local Presence.
Global Reach
to the 2013/2014
WESCO Global Guide
for the Mining and Oil
& Gas Industries
I am pleased to introduce WESCO’s first
Global Guide for the Mining and Oil & Gas Industries.
Focusing on solutions for harsh and hazardous environments,
this catalog provides a sample of the range of products and
services we offer from 30 of the largest and most-respected
manufacturers to support your supply chain, from strategic
planning through production and delivery.
Decision makers in the mining and oil & gas industries face complex issues that cross
borders, continents, and political divides. As energy companies contend with operating
challenges brought on by the global economy and new and emerging regulations,
WESCO offers products and solutions that can reduce costs, streamline supply chain
processes, increase total supply capacity, and enhance value chain integrity.
Whether you are a longtime WESCO customer or just getting to know us, you will benefit
from leveraging our entire portfolio of products and services. Our WESCO team looks
forward to being your one source for global electrical, communications, capital projects,
and MRO supply chain solutions.
John J. Engel
Chairman, President, and Chief Executive Officer
www.wesco.com
The One Place Where
You Can Get It All
Audio/Visual
Pro A/V Solutions
Voice, Paging, and Sound Products
Residential Solutions
Automation and Control
Bar Code Printers, Scanners, and Software
Boxes and Enclosures
Circuit Breakers
Conduit and Raceway
Controls, Relays, and Timers
Data Communications Infrastructure Solutions
Cable — Copper and Fiber Optic
From our beginnings as part of Westinghouse
Electric in 1992, WESCO has completed
countless large, complex projects with great
success. WESCO’s heritage was built on
large construction projects all over the world.
Leverage our expertise and experience to keep
your capital projects and day-to-day MRO
spend well-coordinated and operating at peak
efficiency.
Local and International Support
Angola | Australia | Brazil | Canada | Chile
China | Czech Republic | England | Mexico
Peru | Poland | Saudi Arabia | Scotland
Singapore | UAE | USA | and more!
Learn more at www.wesco.com/
international
Cable Management Solutions
Equipment Racks and Cabinets
Drives and Logic Control
Electrical Distribution Equipment
Enclosures
Fans, Heaters, and Ventilation Equipment
Fittings
Fuses and Circuit Breakers
Handheld Products
Illumination/Indicators
Industrial and Maintenance Supplies
Installation Supplies
Lamps, Fixtures, and Ballasts
Low-Voltage Specialty Wire and Cable
Machine Safety Products
Material Handling
Motors
Non-Electrical MRO
Physical Security Solutions
Power Distribution and Protection
Power Supplies
Relays
Security
Sensors
Surge and Power Protection
Switches
Termination, Tape, Splicing, and Marking
Tools and Testers
Transformers
Wire and Cable
Wireless Networking Solutions
Wiring Devices
WESCO Delivers
Inventory Management
Solutions for
Mining and Oil & Gas
• Logistics and warehousing for local inventory
and support
• Material take-offs
• Remote inventory management through RPM,
our global materials management system
• Jobsite trailers
• Cable management
Learn more at www.wesco.com
Quick Reference
Table of Contents
SAFETY ..................................... 3–22
Streamline Your
Supply Chain
with WESCO,
Your One Source
LAMPS & LIGHTING ................. 23–32
CONDUIT, BOXES,
& RACEWAY ............................ 33–44
ENCLOSURES, FITTINGS,
& GROUNDING ........................ 45–60
WIRE & CABLE......................... 61–72
WESCO is a Fortune 500 company with
sales of US$6.1 billion in 2011, and the
leading full-line distributor of electrical,
data communications, and industrial
products, and advanced supply chain
procurement services.
Listed in this catalog is just a sampling
of the products we offer for harsh &
hazardous environments. Overall, WESCO
offers more than 1,000,000 electrical,
data communications, and MRO products
from the brands you trust. So if you’re
looking for something specific and you
don’t see it here, contact the WESCO
Branch nearest to you.
WIRING DEVICES ..................... 73–82
CIRCUIT BREAKERS
& FUSES.................................. 83–91
TRANSFORMERS &
ELECTRICAL DISTRIBUTION ... 93–100
TOOLS, TESTERS,
& EQUIPMENT ..................... 101–110
INDUSTRIAL MAINTENANCE
SUPPLIES ............................ 111–115
DATA COMMUNICATIONS.... 117–120
INDEX .................................. 121–124
Product Index ..................... 122–123
Supplier Index .................... 123–124
We Make
Ordering
Easy
Visit or Call:
Your Local WESCO Branch
See the Branch Locator at:
www.wesco.com
580
1
leveraging purchasing power through WESCO’s
Global Accounts Program
WESCO’s Global Accounts program provides comprehensive supply chain solutions to Fortune 1000 and other
multi-site companies for their MRO, OEM, and capital expenditure needs.
WESCO offers four primary solutions for global accounts:
Integrated Supply
Global Capital
Project Management
s Turnkey outsourcing solutions
s Provide staff
s Proprietary technology
s Best-in-class procurement
processes
s Upgrades and retrofits
s Site renovations, expansions
s New facilities
s Material take offs, supply chain
management, inventory control
Strategic Industrial
& Electrical Distribution
Direct Material Solutions
s Supply chain consulting
s Production and
assembly line stocks
s Kitting
s JIT deliveries
s Global sourcing
and procurement
s Daily replenishments
s Scheduled maintenance
s Sustainability programs
s Emergencies
s Small projects
Success Story
WESCO has the ability to expand with customers around the world:
s Built successful relationship with top petrochemical company
in several states in U.S., centered on electrical MRO
s Expanded relationship to include capital projects for off-shore
oil platforms
s Further expanded relationship to provide MRO and capital project
support across entire U.S.
s Now expanding globally to support all customer facilities worldwide
For more information on WESCO’s Global Accounts Program,
call or visit your local Branch, or log on to www.wesco.com
2
Safety
In This Section
Labeling .......................................4–8
Lockout........................................... 8
Signage .......................................... 9
Signaling ..................................10–13
Flashlights ................................14–15
Headlamps ................................... 15
Hand Protection .......................16–17
Protective Clothing....................17–22
This is a
sampling of the
Safety products that
WESCO offers.
Contact us to inquire
about your particular
project and application.
3
3
SAFETY
Labeling
SAFETY
DOT-FCM/Shrink System
The DOT-FCM/Shrink System prints the DOT-FCM Flexible
Cable Markers as well as all sizes of DOTshrink Heatshrink Tubing
via a user-friendly thermal transfer printer and DOTlabel Software.
DOTgroup International...
Made from a high-quality LSOH (Low Smoke Zero Halogen), UV stable,
and fire-retardant material, the DOT-FCM Flexible Cable Markers are
manufactured in a continuous format in two widths (13mm and 27mm),
two lengths (76mm and 102mm), and users can print more than
3,550 cable markers per hour.
the UK’s leading independent
manufacturer and supplier
of Electrical, Instrumentation,
The DOTshrink range of heatshrink tubing is manufactured from flame-retarded military-grade
polyolefin and offers a cost-effective way of identifying cores/cables in tough industrial environments.
Mechanical, and Safety Labeling
and Identification Solutions.
DOT-FCM Flexible Cable Markers
Since the formation of its first
associated undertaking in January
2001, DOTgroup International has
sustained enormous growth and
is now established as one of the
major players in Oil & Gas and
The DOT-FCM Flexible Cable Markers have numerous features and benefits
t
t
t
t
t
Petrochemical markets.
t
DOTgroup International has
worked on some of the most
t
high-profile projects around
t
the world, including one of the
t
t
largest construction projects
in Europe— Terminal 5 at
Heathrow—and has regularly
been selected as the nominated,
preferred, or specified supplier
of Electrical, Instrumentation,
Mechanical, and Safety Labelling
and Identification Solutions to an
enviable list of Blue Chip clients.
DOTgroup International is an
independent company which is
Material—LSOH (Low Smoke Zero Halogen), UV stable, and fire retardant
Marking—Thermal transfer via DOT-FCM/Shrink System Printer
Colours—Yellow and white (other colours can be made to order—M.O.Q. will apply)
Print more than 3,550 cable markers per hour
(using 75mm standard print speed)
via user-friendly thermal transfer printer
Two label widths: 13mm and 27mm, and
two label lengths: 76mm and 102mm
Cable markers produced in continuous format with
easy-to-tear perforation—no more losing loose labels
Centralised gap in cable markers and gap sensor in printer
mean no lining up required, minimising label wastage
Flexible cable markers bend to shape of round cables
with clear, easy-to-read text or numbers
Spool quantities of either 245 or 325 (approx.)—less frequent spool changes required
Easy to use DOTlabel software can import information direct from Word and Excel, plus an auto-sequencing
function
Mfr.’s Model No.
DOT-FCM1376
DOT-FCM13102
DOT-FCM2776
DOT-FCM27102
Dimensions
Spool Quantities
13mm x 76mm
13mm x 102mm
27mm x 76mm
27mm x 102mm
325 Cable Markers per Spool (approx.)
DOTshrink Heatshrink Marker Sleeves
The DOTshrink System range of heatshrink marker sleeves offer clients a convenient and
cost-effective way of identifying cores and cables permanently, even in tough industrial environments.
Manufactured from flame-retarded military-grade polyolefin, DOTshrink marker sleeves meet the
requirements of a wide range of industrial and technical standards, and are also very versatile
through excellent balance of chemical, electrical, and mechanical properties. The operating
temperature range of DOTshrink marker sleeves is -55˚ C to 135˚ C; they are unaffected by water,
and offer excellent resistance to commonly encountered industrial chemicals.
wholly owned by the Directors,
who have extensive knowledge
in sales, technical, management,
and quality processes. This has
enabled the company to reinvest
profit into a continual programme
of improvement and growth.
4
Mfr.’s Model No.
DOTshrink2.4
DOTshrink3.2
DOTshrink4.8
DOTshrink6.4
DOTshrink9.5
DOTshrink12.7
DOTshrink19.1
DOTshrink25.4
Inside Dia. (mm)
Expanded Recovered
2.4
3.2
4.8
6.4
9.5
12.7
19.1
24.4
1.2
1.6
1.6
3.2
4.8
6.4
9.5
12.7
Wall Thickness (mm)
Recovered (nom.)
Spool Size
0.51 +/-0.07 mm
0.51 +/-0.07 mm
0.51 +/-0.07 mm
0.64 +/-0.07 mm
0.64 +/-0.07 mm
0.64 +/-0.07 mm
0.76 +/-0.07 mm
0.89 +/-0.07 mm
30 m
30 m
30 m
30 m
30 m
30 m
30 m
20 m
Approvals and Standards: BS3G198 Type 11A & 11B, Def. Stan. 59-97/3 Type 1a & 2b,
SAE-AMS-DTL-23053/5 (MIL-I-23053/5) & UL224 VW-1 Flammability
Labeling
SAFETY
DOTcard System
SAFETY
The DOTcard System comprises of three different sizes of cable markers, core idents, and valve
tags that are printed via a thermal transfer printer using the simple DOTlabel Software. The ability
to print up to 4,800 cable markers and 7,200 core idents per hour makes the DOTcard System
probably the most efficient system for producing high numbers of labels on the market today.
The DOTcable862, DOTcable864, DOTcable458 cable markers, and DOTvalve3 valve tags are
manufactured from a specially formulated nylon/ABS compound and have achieved the following
test accreditations: ISO 4892-2 (weathering test equivalent to five years exposure in a Northern
European climate), ISO 188 (long-term high temperature +850˚ C), ISO 188 (short-term high
temperature +1800˚ C), MIL-STD-810F (long-term low temperature -400˚ C), MIL-STD-202G
(long-term humidity), ASTM B117 (salt fog resistance), MIL-M-81531 (print adherence rub test),
SAE AS81531 (print adherence rub test), and chemical resistance.
The DOTcard2130 core idents and DOTsleeves are a two-part system for identifying core idents/
ferrules. The system can print up to 7,200 core idents per hour and the benefits of a two-part
system include the ability to install the DOTsleeves before the core ident information is available
and for ease of ongoing maintenance being able to change the core ident without having to
disconnect the cable and retest the circuit.
DOTcable862, DOTcable864, DOTcable458 Cable Markers & DOTvalve3 Valve Tags
Mfr.’s Model No.
Dimensions
Packaging
DOTcable862
DOTcable864
DOTcable458
DOTvalve3
86mm x 27mm
86mm x 13.5mm
45mm x 10.75mm
28.5mm x 54mm
200 per Box
400 per Box
800 per Box
300 per Box
DOTcard2130 Core Idents & DOTsleeve Transparent Sleeves
Mfr.’s Model No.
Dimensions
Size Range
Packaging
DOTcard2130
DOTsleeve21/1
DOTsleeve21/2
DOTsleeve21/3
DOTsleeve21/4
DOTsleeve30/1
DOTsleeve30/2
DOTsleeve30/3
DOTsleeve30/4
Core Idents
21mm Sleeves
21mm Sleeves
21mm Sleeves
21mm Sleeves
30mm Sleeves
30mm Sleeves
30mm Sleeves
30mm Sleeves
21mm or 30mm Core Idents
Ø 1.7–2.8mm/0.5–0.75mm²
Ø 2.5–5.0mm/0.75, 1.0, 1.5, 2.5, and 4.0mm²
Ø 4.0–10.0mm/2.5–16mm²
Ø 8.0–16mm/16–70mm²
Ø 1.7–2.8mm/0.5–0.75mm²
Ø 2.5–5.0mm/0.75, 1.0, 1.5, 2.5, and 4.0mm²
Ø 4.0–10.0mm/2.5–16mm²
Ø 8.0–16mm/16–70mm²
1,200 per Box
1,000 per Bag
1,000 per Bag
1,000 per Bag
1,000 per Bag
1,000 per Bag
1,000 per Bag
1,000 per Bag
1,000 per Bag
DOT Laser Engraved Stainless Steel
The range of DOT Laser Engraved Stainless Steel Cable Markers and Dog Tags are made from 316 stainless steel
and laser engraved to give a permanent black text, which is resistant to a number of organic solvents, acids/bases,
boiling H2O, LN2, flames, and hot/cold cycles. Test data available on request. Identification solutions, which are
ideal for tough and the most extreme industrial environments.
Mfr.’s Model No.
DOT-LESSCM8919
DOT-LESSCM8910
DOT-LESSDT38
DOT-LESSDT26
Description
Dimensions
Laser Engraved Stainless Steel Cable Marker
Laser Engraved Stainless Steel Cable Marker
Laser Engraved Stainless Steel Dog Tag
Laser Engraved Stainless Steel Dog Tag
89mm x 19mm
89mm x 10mm
38mm with 5mm Hole
26mm with 5mm Hole
5
SAFETY
SAFETY
Labeling
Brady® BMP®51 and BMP®53 Label Makers
Brady® BBP®33 Label Printer
The BMP51 and BMP53 Label Makers
are compact, versatile, portable
printers with built-in Bluetooth®
technology for wireless
printing. Design and
print labels with these
printers using the
free Brady® Mobile
App and an
Android Phone.
The BBP33 printer offers highperformance “Full Hassle-Free”
printing. Smart chip supplies
automatically set up label,
eliminating calibration steps
and label waste. Drop, lock and
print labels and ribbons.
75447314703
BBP33-C
t
t
t
t
Quick and easy label design
Hassle-free printer cartridges
Wireless printing capabilities
Rugged industrial printer and
materials
t 300 dpi print head and 1" per
second print speed
t Ribbon and label materials
in one cartridge
t Create, edit, print and save labels
with an Android phone and the Brady
Mobile App
t 20 different materials available —
you can have the right material
for your specific job
t Durable materials that won’t fade,
smear or fall off — you only need
to label something once
Mfr.’s Model No.
UPC#
Description
75447314708
75447314703
75447314708
75447314703
M-11-427
75447308330
BMP53 Label Maker with AC Adapter
BMP51 Label Maker with Battery Pack
and AC Adapter
MSeries B427 Black on White/SemiClear, 0.75" x 0.5" x 0.375", 360/Roll,
Self-Laminating Vinyl
M-11-498
75447314215
MSeries B498 Black on White,
0.50" x 0.75", 220/Roll, Repositionable
Vinyl Cloth
M-18-498
75447314548
0.75" x 1.00", 180/Roll, Repositionable
Vinyl Cloth
M-19-427
75447308333
MSeries B427 Black on White/SemiClear, 1" x 1" x 0.375", 200/Roll,
M-21-427
75447308335
MSeries B427 Black on White/SemiClear, 1" x 2.5" x 0.75", 80/Roll,
M-31-427
75447308344
MSeries B427 Black on White/SemiClear, 1.5" x 1" x 0.5", 200/Roll,
MC-1500-595-CL-BK
75447314649
MSeries B595 Black on Clear,
1.50" x 20', 1 Roll, Vinyl Film
with Permanent Adhesive
MC-1500-595-WT-BK
75447314657
MC-375-422
75447308317
M50-SC
75447370764
MC-1000-595-BL-WT
75447314673
MC-1000-595-CL-BK
75447314648
MSeries B422 Black on White, 0.375"
x 25', 1 Roll, Permanent Polyester
Soft Carrying Case for BMP51
or BMP53
MSeries B595 White on Blue,
MSeries B595 Black on Clear,
The BMP53 does not come with keyboard or screen. It acts as a peripheral label maker.
6
t
t
t
t
t
Automatic label setup
Record fast material changeovers
Prints on first label
Impressive material lineup
No label calibration or adjustments
t Foolproof ‘drop-in’ ribbon
and label cartridges
t No more wasted labels —
even on sleeves
t More than 400 label cartridges
and 38 materials to choose from
Mfr.’s Model No.
UPC#
Description
BBP33-C
66282098601
BBP33-C-LMP
66282098612
BBP33-C-LMP-MWS
66282098614
BBP33 with Auto Cutter (NA)
Printer only
BBP33 with Auto Cutter (NA) +
LabelMark™ Pro Software CD
BBP33 with Auto Cutter (NA) +
LabelMark Pro + MarkWare
Standard Software
B30-R4300
75447321178
B33-10-427
66282096939
B33-113-427
66282096941
B33-116-427
66282096942
B33-118-427
66282096882
B33-119-427
66282096710
B33-120-427
66282096834
B33-121-427
66282096711
B33-27-427
66282096938
B33-56-427
66282096937
B33-73-427
66282096848
B33-75-427
66282096935
B33-80-427
66282096934
B33-9-427
66282096931
B30, Ribbon, R4300, Black,
4.33" x 200'
B33, B427, White, 3.75" x 1",
B33, B427, White, 1" x 0.5",
B33, B427, White, 1" x 1",
B33, B427, White, 1" x 1.5",
B33, B427, White, 1.5" x 1.5",
B33, B427, White, 1" x 1.75",
B33, B427, White, 1.5" x 1.75",
B33, B427, White, 3.75" x 2",
B33, B427, White, 0.937" x 0.75",
B33, B427, White, 1.75" x 0.75",
B33, B427, White, 2.25" x 1",
B33, B427, White, 0.75" x 0.5",
B33, B427, White, 1.437" x 1",
Labeling
SAFETY
Brady® BMP™71 Label Printer
SAFETY
t On-screen indicators for installed label part, label size and color, amount
of remaining supply, remaining battery charge, label and area status,
current font size, and rotation
t Built-in touch cell in labels and ribbon
t Rechargable battery, AC power/battery charger, and QWERTY-style keyboard layout
t Ability to serialize data to print on labels; include up to two sequences on your
label and choose whether they should be linked
t Built-in wizard based on applications for electrical, datacomm, and safety labels
t Display communicates important status information
t Printer automatically formats the objects on your label to eliminate guesswork
t Long-lasting battery allows you to take BMP71 anywhere you need it;
AC power/battery charger gives you the flexibility you need
t Save time by reducing the number of steps needed to print serialized data —
BMP71 automatically does it for you
t More than 500 different stock label formats available for the BMP71
M71-SC
BMP71
Mfr.’s Model No.
UPC#
Description
BMP71
M71-QC
M71-SC
M71-ADAPT
M71-BATT
M71-CLEAN
M71-11-427
M71-11-498
M71-125-1-342
M71-17-427
M71-18-427
M71-187-1-342
M71-187-175-342
M71-19-427
M71-21-427
M71-23-427
M71-250-1-342
M71-250-175-342
M71-29-427
M71-30-427
M71-31-427
M71-32-427
M71-33-427
M71-375-1-342
M71-375-175-342
M71-500-175-342
M71-64-427
M71C-1000-483
66282080182
66282092671
66282092669
66282092674
66282092672
66282092673
66282080075
66282080064
66282080057
66282080066
66282080070
66282080059
66282080056
66282080074
66282080073
66282080061
66282080058
66282080055
66282092581
66282092591
66282080072
66282080065
66282080067
66282092729
66282092731
66282092737
66282080071
66282092496
BMP71 Label Printer
BMP71 Quick Charger
BMP71 Soft Case
BMP71 Roll Adapter for TLS/HM
BMP71 Spare Battery
BMP71 Cleaning Kit
BMP71 Labels, 0.5" x 0.75" (12.7mm x 19.05mm)
BMP71 PermaSleeve™ Wire Marker Sleeves, 1.015" x 0.235" (25.78mm x 5.96mm)
BMP71 Labels, 0.5" x 1" (12.7mm x 25.4mm)
BMP71 PermaSleeve Wire Marker Sleeves, 1.015" x 0.335" (25.78mm x 8.5mm)
BMP71 Labels, 1" x 1" (25.4mm x 25.4mm)
BMP71 Labels, 1" x 2.5" (25.4mm x 63.5mm)
BMP71 Labels, 1" x 4" (25.4mm x 101.6mm)
BMP71 BradyBondz™ Labels, 1" x 50' (25.4mm x 15.24m)
7
SAFETY
Labeling, Lockout
Brady® BBP® 31 Sign & Label Printer
Brady® Personal
Breaker Lockout Kits
SAFETY
Easy to use; packed with functions.
Cover 120/277V and 480/600V
breakers in single- and
multi-pole configurations.
t Features — smart supplies,
touch and go display,
applications abound,
stand-alone or PC
operations, powerful software
options, and hundreds of
material options
105963
BBP31
Mfr.’s Model No.
UPC#
Description
BBP31
BBP31-360B
BBP31-360P
75447318355
75447318356
75447318357
BBP31 Sign & Label Maker
BBP31 Printer with Brady 360® Basic Plan
BBP31 Printer with Brady 360 Preferred Plan
Brady® Ribbons, Tapes,
and Sign Headers
Mfr.’s Model No.
UPC#
Description
B30-R10000
B30-R10000-WT
B30-R10000-RD
B30C-4000-595-RD
75447321168
75447321174
75447321173
75447318330
B30C-500-595-WT
75447318338
B30C-1125-595-WT
75447318337
B30C-2250-595-WT
75447318336
B30C-4000-595-WT
75447318334
B30C-500-595-YL
75447318343
B30C-1125-595-YL
75447318342
B30C-2250-595-YL
75447318341
B30C-4000-595-YL
75447318339
B30C-4000-595-GN
75447318314
B30-25-595-ANSIDA
75447319119
B30-25-595-ANSICA
75447319121
B30-25-595-ANSIWA
75447319123
B30-25-595-ANSINO
75447319125
Ribbons; 4.33"W x 200'L, Black
Ribbons; 4.33"W x 200'L, White
Ribbons; 4.33"W x 200'L, Red
Indoor/Outdoor Vinyl Tape;
4"W x 100'L, Red
0.5"W x 100'L, White
1.125"W x 100'L, White
2.25"W x 100'L, White
4"W x 100'L, White
0.5"W x 100'L, Yellow
1.125"W x 100'L, Yellow
2.25"W x 100'L, Yellow
4"W x 100'L, Yellow
B-595 Indoor/Outdoor Vinyl Tape;
4"W x 100'L, Green
ANSI Danger Pre-Printed Sign Header;
4.00"W x 6.00"H
ANSI Caution Pre-Printed Sign Header;
4.00"W x 6.00"H
ANSI Warning Pre-Printed Sign Header;
4.00"W x 6.00"H
ANSI Notice Pre-Printed Sign Header;
4.00"W x 6.00"H
Danger OSHA Safety Sign Labels;
4.00"W x 6.00"H
Caution OSHA Safety Sign Labels;
4.00"W x 6.00"H
B30-25-595-OSHADA 75447319127
B30-25-595-OSHACA 75447319129
8
t Two 120/277V clamp-on breaker
lockouts with cleats
t Two universal multi-pole breaker
lockouts
t Three 1" red lockout hasps
t Three heavy-duty lockout tags
with nylon cable ties
t One small lockout toolbox
t One toolbox
Mfr.’s Model No.
Description
105963
105964
105965
Kit without Locks
Kit with 3 Keyed-Alike Safety Padlocks
Kit with 3 Keyed-Alike Steel Padlocks
Brady® Personal
Basic Lockout Kits
Contain the basic
devices needed
to lockout common
breakers, valves,
and plugs.
104794
t One 1/2–2-1/2" small ball valve
lockout
t One 1–2-1/2" gate valve lockout
t One 120/277V clamp-on breaker
lockout with cleat
t One universal multi-pole breaker
lockout
t One small 110V plug lockout
t Two 1" lockout hasps
t Two heavy-duty lockout tags
t One small lockout toolbox
Mfr.’s Model No.
Description
104794
104795
104796
Kit without Locks
Brady® Personal
Electrical Lockout Kits
Provide lockouts for use
on most circuit breakers,
electrical plugs, and
disconnect switches.
t One mini cable lockout
t One 3-in-1 plug lockout
t One 480/600V clamp-on breaker
lockout with cleat
t Two universal multi-pole breaker
lockouts
t One oversized breaker lockout
105960
t Three 1" group lockout hasps
t Three heavy-duty lockout tags
t One medium lockout toolbox
Mfr.’s Model No.
UPC#
Description
105960
105961
105962
75447303477
75447303478
75447303479
Kit without Locks
Signage
SAFETY
Brady® Safety Signs
Prevent injuries and reduce downtime with safety signs that put important information at the point of need.
SAFETY
43110
40676
40772
40989
42697
40970
42660
40766
41054
43295
Mfr.’s Model No.
Description
43110
25533
84877
40676
22112
84096
42697
25120
88428
40772
22208
84213
41159
25595
84994
40989
22425
84563
40970
22406
84536
42660
25083
88379
40766
22202
84204
41054
22490
84674
43295
25718
85261
DANGER High-Voltage; Aluminum, 10"H x 14"W, Black, Red/White
DANGER High-Voltage; Plastic, 10"H x 14"W, Black, Red/White
DANGER High-Voltage; Self-Sticking Polyester, 10"H x 14"W, Black, Red/White
DANGER Keep Out; Aluminum, 10"H x 14"W, Black, Red/White
DANGER Keep Out; Plastic, 10"H x 14"W, Black, Red/White
DANGER Keep Out; Self-Sticking Polyester, 10"H x 14"W, Black, Red/White
No Smoking (with graphic); Aluminum, 10"H x 14"W, Black, Red/White
No Smoking (with graphic); Plastic, 10"H x 14"W, Black, Red/White
No Smoking (with graphic); Self-Sticking Polyester, 10"H x 14"W, Black, Red/White
Authorized Personnel Only; Aluminum, 10"H x 14"W, Red/White
Authorized Personnel Only; Plastic, 10"H x 14"W, Red/White
Authorized Personnel Only; Self-Sticking Polyester, 10"H x 14"W, Red/White
CAUTION Safety Glasses Required in This Area; Aluminum, 10"H x 14"W, Black/Yellow
CAUTION Safety Glasses Required in This Area; Plastic, 10"H x 14"W, Black/Yellow
CAUTION Safety Glasses Required in This Area; Self-Sticking Polyester, 10"H x 14"W, Black/Yellow
DANGER Confined Space Enter by Permit Only; Aluminum, 10"H x 14"W, Black, Red/White
DANGER Confined Space Enter by Permit Only; Plastic, 10"H x 14"W, Black, Red/White
DANGER Confined Space Enter by Permit Only; Self-Sticking Polyester, 10"H x 14"W, Black, Red/White
CAUTION Hard Hats Required; Aluminum, 10"H x 14"W, Black/Yellow
CAUTION Hard Hats Required; Plastic, 10"H x 14"W, Black/Yellow
CAUTION Hard Hats Required; Self-Sticking Polyester, 10"H x 14"W, Black/Yellow
DANGER No Smoking No Open Flames No Sparks; Aluminum, 10"H x 14"W, Black, Red/White
DANGER No Smoking No Open Flames No Sparks; Plastic, 10"H x 14"W, Black, Red/White
DANGER No Smoking No Open Flames No Sparks; Self-Sticking Polyester, 10"H x 14"W, Black, Red/White
WARNING No Trespassing; Aluminum, 10"H x 14"W, Black/Orange
WARNING No Trespassing; Plastic, 10"H x 14"W, Black/Orange
WARNING No Trespassing; Self-Sticking Polyester, 10"H x 14"W, Black/Orange
Exit; Aluminum, 10"H x 14"W, Red/White
Exit; Plastic, 10"H x 14"W, Red/White
Exit; Self-Sticking Polyester, 10"H x 14"W, Red/White
Fire Extinguisher (with graphic); Aluminum, 10"H x 14"W, Red/White
Fire Extinguisher (with graphic); Plastic, 10"H x 14"W, Red/White
Fire Extinguisher (with graphic); Self-Sticking Polyester, 14"H x 3-1/2"W, Red/White
9
SAFETY
Signaling
Edwards Polaris Class Beacons
SAFETY
Edwards Polaris Class LED Beacons are
NEMA Type 4X and IP66 rated visual
signals. Available in Edwards’ 94 and 57
Series housings, they are field configurable
with up to seven flashing patterns using a
Hidden in Plain Sight™ (HIPS) switch.
t
t
t
t
t
Available in 12-24V DC, 24V AC, or 120V AC
Six lens colors
Seven flash patterns (includes steady-ON)
Hidden in Plain Sight™ (HIPS) switch
Black or gray base
57PLEDMA24AD
57PLEDMR24ADB
94PLEDMA24ADB
Mfr.’s Model No.
UPC#
Description
94PLEDMA24AD
94PLEDMR24AD
94PLEDMA24ADB
94PLEDMR24ADB
94PLEDMA120A
94PLEDMR120A
94PLEDMA120AB
94PLEDMR120AB
57PLEDMA24AD
57PLEDMR24AD
57PLEDMA24ADB
57PLEDMR24ADB
57PLEDMA120A
57PLEDMR120A
57PLEDMA120AB
57PLEDMR120AB
78264014024
78264014032
78264014025
78264014033
78264014036
78264014044
78264014037
78264014045
78264014000
78264014008
78264014001
78264014009
78264014012
78264014020
78264014013
78264014021
Polaris Class LED Beacon in 94 Series Housing, Amber, 12-24V DC and 24V AC, Gray Base
Polaris Class LED Beacon in 94 Series Housing, Red, 12-24V DC and 24V AC, Gray Base
Polaris Class LED Beacon in 94 Series Housing, Amber, 12-24V DC and 24V AC, Black Base
Polaris Class LED Beacon in 94 Series Housing, Red, 12-24V DC and 24V AC, Black Base
Polaris Class LED Beacon in 94 Series Housing, Amber, 120V AC, Gray Base
Polaris Class LED Beacon in 94 Series Housing, Red, 120V AC, Gray Base
Polaris Class LED Beacon in 94 Series Housing, Amber, 120V AC, Black Base
Polaris Class LED Beacon in 94 Series Housing, Red, 120V AC, Black Base
Polaris Class LED Beacon in 57 Series Housing, Amber, 12-24V DC and 24V AC, Gray Base
Polaris Class LED Beacon in 57 Series Housing, Red, 12-24V DC and 24V AC, Gray Base
Polaris Class LED Beacon in 57 Series Housing, Amber, 12-24V DC and 24V AC, Black Base
Polaris Class LED Beacon in 57 Series Housing, Red, 12-24V DC and 24V AC, Black Base
Polaris Class LED Beacon in 57 Series Housing, Amber, 120V AC, Gray Base
Polaris Class LED Beacon in 57 Series Housing, Red, 120V AC, Gray Base
Polaris Class LED Beacon in 57 Series Housing, Amber, 120V AC, Black Base
Polaris Class LED Beacon in 57 Series Housing, Red, 120V AC, Black Base
Edwards 105XBRi Chameleon Multi-Status Indicators
Ideal for use where multiple status indications
are necessary in a compact housing.
t XTRA-SAFE™ Technology enables status
indication for those who are color blind
t Panel-or conduit-mounted
t UL® Listed for Class I, Division 2, Groups
A, B,C, and D; Class II, Division 2, Groups
E, F, and G; and Class III locations
94PLEDMR24AD
Edwards 116EXMLED Series AdaptaBeacon
LED Explosion-Proof Lights
t 14 user-selectable flash patterns
t UL® and cUL Listed for use in Division 1
explosion-proof environments
t Type 3R, Type 4X, and Marine ratings allow
installation in outdoor locations
t Mounting methods — bracket, ceiling, pendant,
or stanchion
t LED light source has up to 30 times longer life
than comparable strobe light sources
116EXMLEDW-Y6
Mfr.’s Model No.
Description
Mfr.’s Model No.
Description
105XBRIRGA120A
Gray Base, 120 VAC, 0.100A Current, Red, Green,
Amber LED Colors
Gray Base, 120 VAC, 0.100A Current, Red, Blue,
Amber LED Colors
Gray Base, 24 VDC, 0.150A Current, Red, Green,
Amber LED Colors
Gray Base, 24 VDC, 0.150A Current, Red, Blue,
Amber LED Colors
Pipe Mount Attachment
Wall Mount Attachment (requires use of 105BX)
Outlet Box Attachment for Wall or Ceiling Mounting
116EXMLEDA-Y6
LED Beacons — 120–240V, 50/60 Hz; 125–250 VDC —
0.215A, 0.176A; Amber
0.215A, 0.176A; Blue
0.215A, 0.176A; Clear
0.215A, 0.176A; Green
0.215A, 0.176A; Red
Ceiling/Wall Mounting Module; Conduit Size: 3/4" NPT
Pendant Mounting Module; Conduit Size: 3/4" NPT
Stanchion Mounting Module; Conduit Size: 1-1/4" NPT
Wall Bracket Mounting Module
105XBRIRBA120A
105XBRIRGA24D
105XBRIRBA24D
105PM
105BM
105BX
10
116EXMLEDB-Y6
116EXMLEDW-Y6
116EXMLEDG-Y6
116EXMLEDR-Y6
116EX-C
116EX-P
116EX-S
116EX-B
Signaling
Edwards AdaptaHorn® Vibrating Horns
The Edwards 5533M Adaptatone is an explosion-proof, heavy-duty
industrial, tone selectable, signaling device capable of producing
volume-controlled, high-decibel tones.
Provide distinctive signals for
timing, scheduling, paging, general
alarm, and warning.
SAFETY
Edwards 5533M Series Adaptatone
SAFETY
t Certain models can be operated by PLCs that
match their input load requirements
t Low-current, high-decibel vibrating horns
t 55 tone capability — no
additional tone modules needed
t Two contact closures allow two
audible output signals
t Tones selected by setting
miniature switches within
the unit. One tone can be
assigned priority
t Up to 110 dB sound output
t UL® Listed for use in Division 1
explosion-proof environments
877-G1
5533M
872-N5
Mfr.’s Model No.
UPC#
Description
5533M-AQ
78264028200
5533M-Y6
78264028201
Adaptatone Hazardous Location Multiple
Tone-Industrial Signal, 24-36V DC, 24V AC
Adaptatone Hazardous Location MultipleTone industrial Signal, 125-250V DC,
120-240V AC
878EX-N5
Edwards 340EX Series Adaptabel® AC Vibrating Bells
Mfr.’s Model No.
Description
870-G5
Hazardous location AC vibrating bells produce a distinctive, loud, clear
ringing sound that is free of mechanical clatter. The striker continues
to strike the gong in rapid-fire action as long as current is applied.
870-N5
Indoor, Flush Mount, AC; 24 VAC, 0.63A; 15.1 VA,
103 db @ 10'; PLC Compatible
Indoor, Flush Mount, AC; 120 VAC, 0.13A; 15.6 VA,
NEMA 4X, Panel Mount, AC; 24 VAC, 0.63A; 15.1 VA,
NEMA 4X, Panel Mount, AC; 120 VAC, 0.13A; 15.6 VA,
Indoor, Single-Projector, AC; 120 VAC, 0.13A; 15.6 VA,
Indoor, Grille-Type, AC; 24 VAC, 0.63A; 15.1 VA,
Indoor, Grille-Type, AC; 120 VAC, 0.13A; 15.6 VA,
Indoor, Grille-Type, DC; 24 VDC, 0.16A; 3.8 VA,
NEMA 4X, Weatherproof, Grille-Type, AC; 24 VAC, 0.63A;
15.1 VA, 103 db @ 10'; PLC Compatible
NEMA 4X, Weatherproof, Grille-Type, AC; 120 VAC, 0.13A;
NEMA 4X, Weatherproof, Grille-Type, DC; 24 VDC, 0.16A;
Outdoor, Hazardous Location, Grille-Type, AC;
120 VAC, 0.13A; 15 VA, 97 db @ 10'
Outdoor, Hazardous Location, Polarized Grille-Type, DC;
24 VDC, 0.16A; 3.8 VA, 97 db @ 10'
NEMA 4X, Weatherproof, Single-Projector, AC;
120 VAC, 0.2A; 24 VA, 97 db @ 10'
Hazardous Location, Single-Projector, AC; 120 VAC, 0.45A;
54 VA, 105 db @ 10'
t 6", 8" and 10" gong sizes
t Low power drain for efficient operation
over long wire runs
t Completely assembled
t Weatherproof
t UL Listed for Class I, Divisions 1 and 2,
Groups B, C, and D; Class II, Divisions 1
and 2, Groups E, F, and G; and Class III
t NEMA Type 4
t Adjustment-free self-compensating plunger
t Corrosion-resistant finish
Mfr.’s Model No.
UPC#
Description
340EX-6G5
78264023750
340EX-6N5
78264023754
340EX-6R5
78264000229
340EX-8N5
78264023768
340EX-10G5
78264023774
340EX-10N5
78264023776
340EX-10R5
78264000231
6" Gong, 24V AC 50/60 Hz, 0.210A RMS
Current, 90/84 dB @ 1m / 10'
6" Gong, 120V AC 50/60 Hz, 0.41A RMS
Current, 90/84 dB @ 1m / 10'
6" Gong, 240V AC 50/60 Hz, 0.021A RMS
Current, 90/84 dB @ 1m / 10'
8" Gong, 120V AC 50/60 Hz, 0.041A RMS
Current, 95/89 dB @ 1m / 10'
10" Gong, 24V AC 50/60 Hz, 0.210A RMS
Current, 94/88 dB @ 1m / 10'
10" Gong, 120V AC 50/60 Hz, 0.041A RMS
Current, 94/88 dB @ 1m / 10'
10" Gong, 240V AC 50/60 Hz, 0.021A RMS
Current, 94/88 dB @ 1m / 10'
870P-G5
870P-N5
872-N5
874-G5
874-N5
875-G1
876-G5
876-N5
877-G1
878EX-N5
879DEX-G1
B-N-8546-N5
B-KM-8130-N5
11
SAFETY
Signaling
SAFETY
Federal Signal 27XST Explosion-Proof Strobe Light
Federal Signal’s Model 27XST explosion-proof
strobe light produces 80 high-intensity flashes
per minute. This warning light operates
on 24 VDC, 120 VAC, and 240 VAC 50/60 Hz.
27XST
t Available in 24 VDC, 120 VAC,
and 240 VAC
t Six lens colors
t 10,000-hour strobe tube
t 3/4" pendant mount standard; other
options available
t Dome guard optional
t Type 4X, IP66 enclosure
t Marine Rated
t UL® and cUL Listed, CSA Certified,
CSFM Approved
t Also available in
27XL LED Series
Federal Signal 151XST Hazardous Location
Strobe Warning Light
Rugged design for use in hazardous locations.
t Dome guard protects against accidental collision with moving equipment
and mounts on 3/4" pipe
t Meets NEMA Type 4X IP66 watertight, dust-tight, and corrosion-resistant requirements
t UL® Listed and CSA Certified for Class I, Division 2, Groups A, B, C, and D;
Class II, Division 1, Groups E, F, and G; Class III
t Optional surface mounts available
t Also available in
191XL LED Series
Mfr.’s Model No.
Description
151XST-120A
10,000-Hour Strobe Tube Life, 80 Flashes per Minute,
120 VAC, 0.035A, Amber
120 VAC, 0.035A, Blue
120 VAC, 0.035A, Clear
120 VAC, 0.035A, Red
151XST-120B
151XST-120C
Mfr.’s Model No.
UPC#
Description
27XST-120ASC
78297938054
27XST-120BSC
78297938055
27XST-120CSC
78297938056
27XST-120GSC
78297938057
27XST-120MSC
78297938002
27XST-120RSC
78297938058
27XST-240ASC
78297938059
27XST-240BSC
78297938060
27XST-240CSC
78297938061
27XST-240GSC
78297938062
27XST-240MSC
78297938003
Explosion-Proof Strobe, 120 VAC, 10,000Hour, Type 4X, IP66 Enclosure, Amber
Explosion-Proof Strobe, 120 VAC, 10,000Hour, Type 4X, IP66 Enclosure, Blue
Explosion-Proof Strobe, 120 VAC, 10,000Hour, Type 4X, IP66 Enclosure, Clear
Explosion-Proof Strobe, 120 VAC, 10,000Hour, Type 4X, IP66 Enclosure, Green
Explosion-Proof Strobe, 120 VAC, 10,000Hour, Type 4X, IP66 Enclosure, Magenta
Explosion-Proof Strobe, 120 VAC, 10,000Hour, Type 4X, IP66 Enclosure, Red
Explosion-Proof Strobe, 240 VAC, 10,000Hour, Type 4X, IP66 Enclosure, Amber
Explosion-Proof Strobe, 240 VAC, 10,000Hour, Type 4X, IP66 Enclosure, Blue
Explosion-Proof Strobe, 240 VAC, 10,000Hour, Type 4X, IP66 Enclosure, Clear
Explosion-Proof Strobe, 240 VAC, 10,000Hour, Type 4X, IP66 Enclosure, Green
Explosion-Proof Strobe, 240 VAC, 10,000Hour, Type 4X, IP66 Enclosure, Magenta
Explosion-Proof Strobe, 240 VAC, 10,000Hour, Type 4X, IP66 Enclosure, Red
27XST-240RSC
78297938063
151XST-120R
Federal Signal Models 31X and 41X
Explosion-Proof Vibrating Horns
Ideal for use in locations with higher risk of explosion or fire.
t Corrosion-resistant, heavy-duty, die-cast
aluminum housing tapped for 3/4" conduit
t UL® and cUL Listed, and CSA Certified
31X-120-3
Mfr.’s Model No.
41X-024-1
12
UPC#
Description
78297922700
120 VAC, 50/60 Hz, 0.2A, 99/110 dB
@ 10'/1m
24 VDC, 1.20A, 100/110 dB @ 10'/1m
31X-120-3
Signaling
Federal Signal 300X and 302X SelecTone
Speaker Amplifiers
t
t
t
t
Available in 24VAC/DC and 120/240VAC
Digital signal amplification
Fused input and output
Produces 0 dBa to 110 dBa @ 10'
(0 dBa to 120 dBa @ 1m)
t
t
t
t
Built-in gain control
Type 4X, IP66 enclosure
UL® 1480 and CSFM Approved
UL® and cUL Listed
Federal Signal Vibratone® Hazardous Location Horn
Division 2 vibrating horn produces coded blasts or sustained tones.
t Effective range of up to 200’
t Can be surface-mounted
t UL® and cUL Listed, CSA
Certified, Type 4X enclosure
t Rated for Class 1, Division 2;
Class II, Division 2; Class III
t Produces 100dBa at 10'
(110 dBa at 1m)
SAFETY
Models 300X and 302X are designed to meet UL 1480 requirements
producing crisp and clear tones, digital voice messages, and live public
addresses in harsh environments with high ambient noise levels.
®
SAFETY
350WBX
Mfr.’s Model No.
Description
350WBX-120
120 VAC, 50/60 Hz, 0.18A, 100/110 dB @ 10'/1m,
Type 4X Enclosure
Kemlux® II
300X
For use in corrosive, harsh, hazardous
applications such as chemical, petrochemical,
marine, power generation, pharmaceutical,
or food processing plants. Modular design
permits selection of cover, body, globe, guard,
and reflector for custom applications.
302X
Mfr.’s Model No.
UPC#
Description
300X-024
78297920060
SelecTone Speaker/Amplifier, Explosion-Proof,
15 Watts, 24VAC/DC, 110/120 dB @ 10'/1m,
Type 4X, IP66 Enclosure
300X-120-240
78297922145
15 Watts, 120/240VAC, 110/120 dB @ 10'/1m,
302X-024
78297920100
30 Watts, 24VAC/DC, 110/120 dB @ 10'/1m,
302X-120-240
78297922146
30 Watts, 120/240VAC, 110/120 dB @ 10'/1m,
Federal Signal Air Horns
A variety of tones and sizes — ideal for hazardous locations.
t For indoor/outdoor use
t Type 4X enclosure
t 120 VAC
KH15P8GD5K10UPL
t Mogul base socket; Cover selection of
rigid and flexible pendant, ceiling, wall
and 25° stanchion in varying threaded
NPT entries
t Minimum starting temperature
of -20° F for PSMH and -40° F for HPS
t Copper-free (<0.4%) aluminum
housing, cover and guard with
white Lektrocote® powder polyester
paint finish
t Optic choices of impact-resistant glass
globe, symmetrical/asymmetrical
glass refractors, dome/angle FRP
reflector, 19" enclosed reflector, and
polycarbonate enclosed low bay
Mfr.’s Model No.
UPC#
Description
KH15P8GD5K10UPL
785988019946
Kemlux II, 150W PS, 1.5" Davit
Mount, Glass Refractor, 40˚C
Maximum Ambient, Unit Pack
KH15P8LW2K20UPL
785988011575
Kemlux II, 150W PS, 3/4" Wall Mount,
Glass Refractor, 40˚C Maximum
Ambient, Unit Pack
KH25P8LD5K20UPL
785988019953
Kemlux II, 250W PS, 1.5" Davit
Mount, Glass Refractor, 40˚C
Maximum Ambient, Unit Pack
KH25P8LW2K20UPL
785988019960
Kemlux II, 250W PS, 3/4" Wall Mount,
Glass Refractor, 40˚C Maximum
Ambient, Unit Pack
6H
3H
Mfr.’s Model No.
Description
3H
3", 750 Hz Frequency, 112/122 dB @ 10'/1m, Air Consumption:
0.20 cu. ft./sec., Type 4X Enclosure
6", 295 Hz Frequency, 122/132 dB @ 10'/1m, Air Consumption:
0.45 cu. ft./sec., Type 4X Enclosure
6H
t Modular design permits selection of
cover, body, globe, guard and reflector
for custom applications
t UL 844 Standard: Class I, Division 2,
Groups A, B, C, D; Class II, Div. 1 & 2,
Groups E, F, G; Class III, Div. 1 & 2
t UL 1598A Marine Outdoor, NEMA 4X
with K-G globe; 40°C ambient listed;
UL 1598 Wet Location
13
SAFETY
SAFETY
Flashlights
Streamlight ProPolymer® 4AA Lux Div 1
Streamlight ProPolymer® 3N LED
Impact-resistant, waterproof, LED, polymer body
flashlight molded in high-visibility yellow. Runs
on four AA alkaline batteries and meets Class 1
Div 1 hazardous atmosphere standard.
Impact-resistant, waterproof, LED, polymer body inspection light
molded in high-visibility yellow. Small enough to fit in a pocket
and meets Class 1 Div 1 hazardous atmosphere standard.
t C4® LED technology, with a 50,000 hour lifetime
t 100 lumens typical; up to 4,200 candela
peak beam intensity with six hours of run time
t Smooth parabolic reflector produces a tight beam
68602
with optimum peripheral illumination
t Rubber-booted, push-button tail switch for one-handed operation
t Unbreakable polycarbonate lens with scratch-resistant coating
t Non-conductive, corrosion-proof
t Weights just 7.6 oz (216 g)
t Solid state power regulation provides maximum light output throughout battery life
t UL® Listed Class I and II, Div. 1, Groups C,D,F,G; Class I, Div. 2, Groups A,B,C,D;
Class III, T4
t Limited lifetime warranty
Mfr.’s Model No.
Description
68602
4 Cells; AA Battery Included; LED; Polymer Body,
Polycarbonate Lens; Yellow
62202
t Up to 30 lumens (typical), up to
120 hours of continuous runtime
t Waterproof
t Rubber-booted, push-button tail switch
for one-handed operation
t Unbreakable polycarbonate lens
with scratch-resistant coating
t Weights 2.1 oz
t Powered by 3 N cell alkaline batteries
t Intrinsic Safety for Hazardous
Locations; UL Listed Class I and II,
Div.1, Groups A,B,C,D,E,F,G; Class III
T4A “Classified”
Mfr.’s Model No.
Description
62202
3 Cell Waterproof Flashlight; N Battery Included;
3 White LEDs
Streamlight ProPolymer® 3C Lux Div 1
Streamlight PolyStinger® LED Haz-Lo®
Impact-resistant, waterproof, LED, polymer body
flashlight molded in high-visibility yellow. Runs
on C cell alkaline batteries and meets Class 1
Div 1 hazardous atmosphere standard.
High-Performance Intrinsically Safe Class I, Div. 1 PolyStinger®
LED Rechargeable Flashlight. Developed for hazardous locations,
atmospheres, and environments, including petro-chem, utility,
and heavy industrial applications.
t Up to 3,500 candela (peak beam intensity),
44 lumens (typical) with 4 hours of runtime
t Deep parabolic beam generator produces
long-range brilliance and smooth halo pattern
33602
t Features a wrist lanyard connection
and a spring-loaded clip
t Rubber-booted, push-button tail switch for one-handed operation
t Unbreakable polycarbonate lens with scratch-resistant coating
t Weights 15 oz.
t Solid state power regulation provides maximum light output throughout battery life
t UL® Listed Class I and II, Div. 1, Groups C,D,F,G; Class I, Div. 2, Groups A,B,C,D;
Class III, T4
Mfr.’s Model No.
Description
33602
3 Cell Utility Flashlight; C Battery; LED; Yellow
14
76412
t C4® LED Technology with
a 50,000 hour runtime
t 3 modes: High — 15,000 candela,
130 Lumens, 4 hour run time; Low —
5,700 candela, 50 Lumens, 12 hour
run time; Moonlight
t Super-tough, non-conductive,
corrosion-resistant nylon polymer
t NiCd battery is rechargeable
up to 1000 times
t Unbreakable polycarbonate lens
with scratch-resistant coating wears
through spills
t Deep-dish parabolic reflector
produces a tight beam with optimum
peripheral illumination
t IPX4 rated for water-resistance;
3 meter impact-resistance tested
t 10.2" (25.9 cm); 13.5 oz
(382 grams) with battery
t USTC listed: Class I, II, Division 1,
Groups C, D, F, G; Class III,
138°C (T3C); Nonincendive: Class I,
Division 2, Groups A, B, C, D
Mfr.’s Model No.
UPC#
Description
76442
080926-76442-2
76412
080926-76412-5
PolyStinger LED Haz-Lo
120 VAC/12 VDC — Black
PolyStinger LED Haz-Lo
120 VAC/12 VDC — Yellow
Flashlights, Headlamps
Streamlight Survivor® LED
Designed with a swivel head
to put light where you need
it and a super-strong magnet
to hold it out of the way, the
Knucklehead is the toughest,
most versatile work light
you’ll ever own.
One of the brightest, toughest, right-angle LED
flashlights, trusted by fire fighters the world over,
safety rated for use in the harshest environments.
90627
t Up to 200 Lumens (high), and 16
hours of run time (low)
t Features a 210° articulating head
that rotates a full 360°
t Removable magnet with 135 lb.
pull strength features a replaceable
rubber boot
t Dual power source: accepts
rechargeable NiCd battery pack
or 4 AA alkaline batteries
t Rubber dome push-button actuator
is easy to operate even when wearing
heavy gloves
90657
t Dual parabolic reflectors set in a large
textured reflector provide smooth flood
light pattern
t High-impact, super-tough nylon
polymer construction for exceptional
durability
t IPX4 rated for water-resistance
t USTC Listed: Class I, II, Division 2,
Groups A, B, C, D, E, F, G; Class III,
Temp Code: T4
t 4 Power Modes, High, Low, Strobe, and Moonlight
t 140 Lumens max output (high) and up to 14 hour
run time (low)
t Unbreakable polycarbonate lens with silicone
anti-scratch coating is assembled in a heavy-duty
bezel (O-ring sealed)
t Industrial rechargeable nickel-cadmium 4.8-volt,
1.8-amp hour, 4-cell sub-C can be recharged up to 1,000 times
t Optional four AA alkaline non-rechargeable battery pack provides
fast replacement with readily available batteries
t Rubber dome push-button switch designed for extremely long life,
provides easy operation even when wearing heavy gloves
t Deep-dish parabolic reflector produces narrow beam; ideal for
smoke-cutting distance-oriented applications
t Serialized for positive identification
t UL® Listed; Class I, Division 1, Groups C,D, T4; Class I, Division 2,
Groups A,B,C,D, T4; Class II, Division 2, Groups F,G; Class III, T4
SAFETY
Streamlight Knucklehead®
SAFETY
90540
Mfr.’s Model No.
UPC#
Description
Mfr.’s Model No.
UPC#
Description
90642
080926-90642-6
90644
080926-90644-0
90540
90541
90503
080926-90540-5
080926-90541-2
080926-90503-0
90627
080926-90627-3
90513
080926-90513-9
Survivor LED, Alkaline Model, Orange
Survivor LED, Alkaline Model, Yellow
Survivor LED with Charger/Holder
and AC & DC Cords, Orange
Survivor LED with Charger/Holder
and AC & DC Cords, Yellow
90657
080926-90657-0
Knucklehead with Hook, Alkaline Model,
Yellow
Knucklehead with Clip, Alkaline Model,
Orange, Clam Packaged
Knucklehead with Hook, 120V AC & DC
Steady Charge, Yellow
Knucklehead with Clip, 120 VAC/12 VDC
Steady Charge, Orange
Streamlight 3AA HAZ-LO® LED Headlamp
Compact, high-performance, super-high flux LED headlamp to meet the stringent requirements of Class 1, Dvision 1
Hazardous Locations while maintaining exceptional light output and a long run time. Perfect for a hard hat.
t
t
t
t
t
t
t
t
t
t
120 Lumens, up to 11 hours of run time
Push-button switch provides easy operation when wearing heavy gloves
O-Ring sealed, water-resistant; drop-test verified
Includes both elastic head strap and rubber hard hat strap
Runs on three AA alkaline batteries
Weight: 7.1 oz. with batteries
Unbreakable polycarbonate lens
MSHA Approved
UL® Listed: Class I, Division 1, Groups A,B,C,D; Class II, Division 1, Groups E,F,G; Class III, T4, “Classified”
Limited lifetime warranty
Mfr.’s Model No.
Description
61200
3 Cells; AA Battery Included; LED Bulb; Yellow/Black; Includes Rubber Hardhat Strap & Elastic Head Strap
61200
15
SAFETY
Hand Protection
West Chester Pro Series™ R2 Gloves
SAFETY
Designed for the toughest work conditions — including work in the oil and gas industry — combining high levels of hand injury protection
with enhanced grip and outstanding comfort.
t
t
t
t
t
Thermoplastic rubber protects the fingertips, knuckles, and back of hand
Parity™ synthetic leather palm, Clarino™ palm, finger patches, and silicone palm pattern resist oil
Bold flourescent easy-to-see colors
Available in R2 FLX, two winter styles, fire resistant, R2 safety cut
Available with regular and extended neoprene cuffs
713SNTPRG
86718 and 86711
86713
86713B
86712
86715
86712B
86716
Mfr.’s Model No.
Description
713SNTPRG/S-XXL
HPPE Shell for Superior Cut Protection, EN 388 = 4344, Features Durable Red Foam Nitrile Coating that Provides Excellent Wet, Dry, and Oil Grip,
144 Pairs per Case, S-XXL
40g Thinsulate™ Features Oil-Resistant Palm that Provides Excellent Grip in Wet Application, Entropex Waterproof Barrier, 72 Pairs per Case, M-XXL
Orange R2 Safety with Extended Neoprene Cuff, 72 Pairs per Case, S-3XL
Blue R2 with Extended Neoprene Cuff, 72 Pairs per Case, S-3XL
Orange R2 with Hook & Loop Closure, 72 Pairs per Case, S-3XL
Blue R2 with Hook & Loop Closure, 72 Pairs per Case, S-3XL
Enhanced Cut Protection, Cut Level 3 EN 388 = 4342, 72 Pairs per Case, S-3XL
Digital Printing on Top Layer of Goatskin Leather Provides Traction and Grip, ASTM F1930 Meets ASTM 6413 for Flame Resistance,
TPR Protection, 72 Pairs per Case, S-3XL
150g Thinsulate™ Features Oil-Resistant Palm that Provides Excellent Grip in Wet Application, Entropex Waterproof Barrier,
72 Pairs per Case, M-XXL
86711/M-XXL
86712/S-3XL
86712B/S-3XL
86713/S-3XL
86713B/S-3XL
86715/S-3XL
86716/S-3XL
86718/M-XXL
Available in multiple sizes. Please contact your local WESCO Branch for ordering information.
16
Hand Protection, Protective Clothing
West Chester Pro Series™ Gloves
SAFETY
West Chester POSIGRIP® Microfoam Nitrile Gloves
t Reinforced fingertips
t Reinforced thumb saddle
t Adjustable hook and loop wrist for the perfect fit
SAFETY
t Foam nitrile offers outstanding comfort and dexterity,
excellent grip, and fitted glove forms to wearer’s hand
t Antibacterial gloves contain Actifresh® , which is effective
against bacteria, fungi, and mildew
High-dexterity gloves with Parity™ synthetic leather.
Designed for ultimate protection, durability, and
performance with unrestricted movement and dexterity.
713KSSN
86150
715SNFTK
86540
Mfr.’s Model No.
Description
86150/S-XXL
JOB 1 One-Piece Synthetic Leather Palm, Padded Palm with
Double Stitching, Lycra Fourchettes, 4-Way Stretch Spandex
Back, 72 Pairs per Case, S-XXL
86540/S-XXL
BRUTE PVC Finger Protection, 4-Way Stretch Spandex Back,
Synthetic Leather Padded Raised Knuckle, Padded PVC
Patched Palm, 72 Pairs per Case, S-XXL
715SNFTKD
715SNFTP
West Chester Zone Defense™ Gloves
Easy-to-understand system of color-coded cut-resistant gloves.
Color indicates cut level, general purpose, medium protection,
and high protection.
t With various shells and coatings, there is a Zone Defense™ glove to meet your needs
Mfr.’s Model No.
Description
713KSSN/S-XL
13g Kevlar/Steel Cut-Resistant Glove with Black Foam Nitrile
Palm Coating, EN 388 = 4542, ANSI 4, 144 Pairs per Case,
S-XL
715SNFTK/S-XXL
Microfoam Nitrile 3/4 Dip Nylon, Antibacterial, Silicone Free,
EN 388 = 4141, 144 Pairs per Case, S-XXL
Microfoam Nitrile 3/4 Dip Dotted Palm, Antibacterial, Silicone
Free, EN 388 = 4141, 144 Pairs per Case, S-XXL
Microfoam Nitrile Dip Nylon, Antibacterial, Silicone Free,
EN 388 = 4141, 144 Pairs per Case, S-XXL
715SNFTKD/S-XXL
715SNFTP/S-XXL
West Chester Flame-Resistant
PosiWear® Disposable Coverall
703CONF
PosiWear® flame-resistant disposable coveralls.
Self-extinguishable, highest oil repellancy in the
industry. Passes NFPA 701. ANSI sized, elastic
waist, anti-static. For use over clothes.
701CRLB
705CGNF
Mfr.’s Model No.
Description
701CRLB/M-XXL
Red Poly/Cotton Shell with Black Latex Palm Coat, Knit Wrist,
Machine Washable, EN 1, ANSI 1, 144 Pairs per Case, M-XXL
Orange HPPE Fiber Shell with Black Foam Nitrile Palm Coat,
Knit Wrist, Machine Washable, EN 3, ANSI 2, 144 Pairs per
Case, S-XXL
703CONF/S-XXL
705CGNF/S-XXL
Green HPPE Fiber Shell with Black Nitrile Palm Coat, Knit
Wrist, Machine Washable, EN5, ANSI 3, 144 Pairs per Case,
S-XXL
t
t
t
t
t
t
Zipper passes flame test to meet CFR 1610
Latex-free elastic
Soft spun lace flame-resistant treated material
Serged seams
Reinforced crotch
Material designed to combust,
then disperses away
3100
Mfr.’s Model No.
Description
3100/M-5XL
Protective Clothing Posi-Wear, Flame Resistant, Blue Coverall,
Zipper Front and Collar, M-5XL
17
SAFETY
Protective Clothing
SAFETY
Bulwark® Classic Coveralls
t
t
t
t
t
t
t
t
t
t
Excel-FR flame resistant
9 oz., 100% cotton
HRC2
NFPA 2112 compliant
Arc rating — ATPV 10.6 cal/cm2
One-piece, topstitched, lay-flat collar
Two-way concealed Nomex® taped brass break-away zipper
Two set-in front pockets
One chest pocket
Two patch hip pockets with side vent openings
CEC2OR
Mfr.’s Model No.
UPC#
Description
Mfr.’s Model No.
UPC#
Description
CEC2KHLN42
CEC2KHLN44
CEC2KHLN46
CEC2KHLN48
CEC2KHLN50
CEC2KHLN52
CEC2KHLN54
CEC2KHLN56
CEC2KHLN58
CEC2KHRG38
CEC2KHRG40
CEC2KHRG42
CEC2KHRG44
CEC2KHRG46
CEC2KHRG48
CEC2KHRG50
CEC2KHRG52
CEC2KHRG54
CEC2KHRG56
CEC2KHRG58
CEC2KHRG60
CEC2KHRG62
CEC2KHRG64
CEC2NVLN42
CEC2NVLN44
CEC2NVLN46
CEC2NVLN48
CEC2NVLN50
CEC2NVLN52
CEC2NVLN54
CEC2NVLN56
CEC2NVLN58
CEC2NVRG38
CEC2NVRG40
CEC2NVRG42
CEC2NVRG44
CEC2NVRG46
CEC2NVRG48
CEC2NVRG50
CEC2NVRG52
CEC2NVRG54
CEC2NVRG56
CEC2NVRG58
CEC2NVRG60
CEC2NVRG62
883248071489
883248071496
883248071502
883248071519
883248071526
883248071533
883248071540
883248071557
883248071564
883248071687
883248071694
883248071700
883248071717
883248071724
883248071731
883248071748
883248071755
883248071762
883248071779
883248071786
883248071793
883248071809
883248071816
883248052013
883248052020
883248052037
883248052044
883248052051
883248052068
883248052075
883248052082
883248052099
883248052211
883248052228
883248052235
883248052242
883248052259
883248052266
883248052273
883248052280
883248052297
883248052303
883248052310
883248052327
883248052334
Khaki — Long, Size: 42
Khaki — Regular, Size: 38
Navy — Long, Size: 42
Navy — Regular, Size: 38
CEC2NVRG64
CEC2ORLN42
CEC2ORLN44
CEC2ORLN46
CEC2ORLN48
CEC2ORLN50
CEC2ORLN52
CEC2ORRG38
CEC2ORRG40
CEC2ORRG42
CEC2ORRG44
CEC2ORRG46
CEC2ORRG48
CEC2ORRG50
CEC2ORRG52
CEC2ORRG54
CEC2ORRG56
CEC2ORRG58
CEC2ORRG60
CEC2ORRG62
CEC2ORRG64
CEC2RBLN42
CEC2RBLN44
CEC2RBLN46
CEC2RBLN48
CEC2RBLN50
CEC2RBLN52
CEC2RBLN54
CEC2RBLN56
CEC2RBLN58
CEC2RBLN60
CEC2RBRG38
CEC2RBRG40
CEC2RBRG42
CEC2RBRG44
CEC2RBRG46
CEC2RBRG48
CEC2RBRG50
CEC2RBRG52
CEC2RBRG54
CEC2RBRG56
CEC2RBRG58
CEC2RBRG60
CEC2RBRG62
CEC2RBRG64
883248052341
883248072363
883248072370
883248072387
883248072394
883248072400
883248072417
883248072561
883248072578
883248072585
883248072592
883248072608
883248072615
883248072622
883248072639
883248072646
883248072653
883248072660
883248072677
883248072684
883248072691
883248073247
883248073254
883248073261
883248073278
883248073285
883248073292
883248073308
883248073315
883248073322
883248073339
883248073445
883248073452
883248073469
883248073476
883248073483
883248073490
883248073506
883248073513
883248073520
883248073537
883248073544
883248073551
883248073568
883248073575
Orange — Long, Size: 42
Orange — Regular, Size: 38
Royal Blue — Long, Size: 42
Royal Blue — Regular, Size: 38
18
Protective Clothing
Bulwark® Premium Coveralls
SAFETY
Carhartt Flame-Resistant
Work Coverall
CNB6RB
Mfr.’s Model No.
UPC#
Description
CNB6NVLN42
CNB6NVLN44
CNB6NVLN46
CNB6NVLN48
CNB6NVLN50
CNB6NVLN52
CNB6NVRG38
CNB6NVRG40
CNB6NVRG42
CNB6NVRG44
CNB6NVRG46
CNB6NVRG48
CNB6NVRG50
CNB6NVRG52
CNB6NVRG54
CNB6RBLN52
CNB6RBLN54
CNB6RBLN56
CNB6RBLN58
CNB6RBLN60
CNB6RBRG38
CNB6RBRG40
CNB6RBRG42
CNB6RBRG44
CNB6RBRG46
CNB6RBRG48
CNB6RBRG50
CNB6RBRG52
CNB6RBRG54
CNB6RBRG56
CNB6RBRG58
CNB6RBRG60
CNB6RBSH38
CNB6RBSH40
CNB6RBSH42
CNB6RBSH44
CNB6RBSH46
CNB6RBSH48
CNB6RBLN40
CNB6RBLN42
CNB6RBLN44
CNB6RBLN46
CNB6RBLN48
CNB6RBLN50
883248086759
883248086766
883248086773
883248086780
883248086797
883248086803
883248086957
883248086964
883248086971
883248086988
883248086995
883248087008
883248087015
883248087022
883248087039
883248088111
883248088128
883248088135
883248088142
883248088159
883248088289
883248088296
883248088302
883248088319
883248088326
883248088333
883248088340
883248088357
883248088364
883248088371
883248088388
883248088395
883248088524
883248088531
883248088548
883248088555
883248088562
883248088579
883248088050
883248088067
883248088074
883248088081
883248088098
883248088104
Royal Blue — Short, Size: 38
t 7-oz. blend of 48% FR modacrylic/37% lyocell/
15% aramid (khaki)
t 7-oz. blend of 45% FR modacrylic/35% lyocell/
20% aramid (dark navy)
t Two chest pockets with flaps
t Two pass-through pockets
t Left-leg utility band
t Multiple tool and utility pockets
t Inherently flame-resistant fabric using
Tecasafe® Plus from TenCate
t Carhartt FR label sewn on back and front pockets;
HRC 2 label sewn on left-chest pocket
t HRC — 2; ATPV — 9.0 (khaki)/HRC — 2;
ATPV — 10.1 (dark navy)
t Meets the performance requirements of NFPA 70E
and is UL® Classified to NFPA 2112
SAFETY
t Nomex® IIIA flame resistant
t 6 oz., 93% Nomex aramid/5% Kevlar®
aramid/2% other fiber
t NFPA 2112 Compliant and HRC1
t Arc rating — ATPV 5.6 cal/cm2
t Two-way concealed Nomex taped brass breakaway zipper
t Mandarin-style, stand-up, two-way safety collar
t Two patch hip pockets and left sleeve pocket
t Two patch chest pockets with flaps and
concealed snap closure
t Concealed snap closure cuff
t Home and industrial wash
100162-410
Khaki
Dark Navy
Mfr.’s Model No.
Description
100162-250
100162-410
Khaki
Dark Navy
Duck Bib Overall/Quilt Lined
t
t
t
t
t
t
t
t
t
t
13-oz., 100% FR duck
11.5-oz. FR quilt lining
FR modacrylic batting quilted to twill face cloth
High back with FR elastic suspenders and FR
center release buckles
Chap-style double-front enhances durability
Multiple tool and utility pockets
Ankle-to-thigh leg zippers with Nomex® FR
zipper tape and protective flaps with arc-resistant
snap closures
Carhartt FR label sewn on bib pocket;
HRC 4 label sewn on left-chest pocket
HRC — 4; ATPV — 54.3
Meets the performance requirements of NFPA 70E
FRR44-BRN
Carhartt
Brown
Dark Navy
Mfr.’s Model No.
Description
FRR44-BRN
FRR44-DNY
Carhartt Brown
Dark Navy
19
SAFETY
Protective Clothing
SAFETY
Midweight Canvas Jean —
Loose Fit
Bulwark® Dungarees
t 8.5-oz. FR canvas: 88% cotton/12%
high-tenacity nylon
t Sits slightly below the waist
t Loose fitting seat and thighs
t Arc-resistant button closure at waist
t Brass zipper fly with Nomex® zipper tape
t Cell phone pocket and utility pocket
t Two reinforced back pockets
t Carhartt FR label sewn on back pocket; HRC 2
label sewn on coin pocket
t HRC — 2; ATPV — 12.1
t Meets the performance requirements of NFPA
70E and is UL® Classified to NFPA 2112
Golden Khaki
Dark Navy
Moss
Mfr.’s Model No.
Description
FRB159-GKH
FRB159-DNY
FRB159-MOS
FRB159-DKB
Golden Khaki
Dark Navy
Moss
Dark Brown
t
t
t
t
t
t
t
t
Excel-FR ComforTouch flame resistant
11.5 oz., 88% cotton/12% nylon
HRC2
NFPA 2112 compliant
One-piece waistband with button closure
Five jean-style pockets
Two deep scoop pockets and two oversized
reinforced hip pockets
t Rule pocket and utility pocket on right leg;
hammer loop and utility pocket on left leg
t Triple-needle felled outseam
t Home and industrial wash
FRB159-DNY
Dark Brown
Signature Denim Jean —
Relaxed Fit
t
t
t
t
t
t
t
t
11.75-oz., 100% cotton FR denim
Sits slightly below the waist
Relaxed fitting seat and thighs
Straight leg
Garment washed for soft finish
Arc-resistant button closure at waist
Brass zipper fly with Nomex® zipper tape
Carhartt FR label sewn on back pocket;
HRC 2 label sewn on coin pocket
t HRC — 2; ATPV — 15.2
t Meets the performance requirements of NFPA
70E and is UL® Classified to NFPA 2112
FRB100-DNM
Denim
Mfr.’s Model No.
Description
FRB100-DNM
Denim
20
PLJ8BD
Mfr.’s Model No.
UPC#
Description
PLJ8BD2830
PLJ8BD3030
PLJ8BD3230
PLJ8BD3430
PLJ8BD3630
PLJ8BD3830
PLJ8BD4030
PLJ8BD4230
PLJ8BD4430
PLJ8BD4630
PLJ8BD4830
PLJ8BD5030
PLJ8NV2830
PLJ8NV3030
PLJ8NV3230
PLJ8NV3430
PLJ8NV3630
PLJ8NV3830
PLJ8NV4030
PLJ8NV4230
PLJ8NV4430
PLJ8NV4630
PLJ8NV4830
PLJ8NV5030
PLJ8OL2830
PLJ8OL3030
PLJ8OL3230
PLJ8OL3430
PLJ8OL3630
PLJ8OL3830
PLJ8OL4030
PLJ8OL4230
PLJ8OL4430
PLJ8OL4630
PLJ8OL4830
PLJ8OL5030
883248513583
883248513620
883248513668
883248513705
883248513743
883248513781
883248513828
883248513866
883248513903
883248513941
883248513989
883248514023
883248514061
883248514108
883248514146
883248514184
883248514221
883248514269
883248514306
883248514344
883248514382
883248514429
883248514467
883248514504
883248514542
883248514580
883248514627
883248514665
883248514702
883248514740
883248514788
883248514825
883248514863
883248514900
883248514948
883248514986
Brown Duck, Size: 28 x 30
Navy Duck, Size: 28 x 30
Olive Duck, Size: 28 x 30
Available in even waist sizes only. Additional hem lengths available; contact your local WESCO
Branch for ordering information.
Protective Clothing
SAFETY
Bulwark® Classic Fit Pre-Washed Denim Jeans
t
t
t
t
14.75 oz., 100% pre-washed cotton denim
HRC2
Five jean-style pockets
Classic fit is traditional and sits at natural waist
Slim leg opening fits over boots
Home and industrial wash
PEJ4DW
Mfr.’s Model No.
UPC#
Description
Mfr.’s Model No.
UPC#
Description
PEJ4DW2830
PEJ4DW3030
PEJ4DW3230
PEJ4DW3430
PEJ4DW3630
PEJ4DW3830
883248513279
883248513316
036394986675
036394986682
036394986699
036394986705
Blue, Size: 28 x 30
Blue, Size: 30 x 30
Blue, Size: 32 x 30
Blue, Size: 34 x 30
Blue, Size: 36 x 30
Blue, Size: 38 x 30
PEJ4DW4030
PEJ4DW4230
PEJ4DW4430
PEJ4DW4630
PEJ4DW4830
PEJ4DW5030
036394986712
036394986729
883248513439
883248513460
883248513507
883248513545
Blue, Size: 40 x 30
Blue, Size: 42 x 30
Blue, Size: 44 x 30
Blue, Size: 46 x 30
Blue, Size: 48 x 30
Blue, Size: 50 x 30
SAFETY
t
t
t
t
Available in even waist sizes only. Additional hem lengths available; contact your local WESCO Branch for ordering information.
Bulwark® Dress Uniform Shirts
Bulwark® Long Sleeve
Tagless Henley Shirts
t
t
t
t
t
t
t
t
t
6.25 oz., 100% cotton
HRC2
Three-button placket
Knit Henley collar
Rib-knit cuff
Single-spade chest pocket
Home wash only
SEL2KH
Mfr.’s Model No.
UPC#
Description
SEL2GYRGS
SEL2GYRGM
SEL2GYRGL
SEL2GYRGXL
SEL2GYRGXXL
SEL2GYRG3XL
SEL2GYRG4XL
SEL2KHRGS
SEL2KHRGM
SEL2KHRGL
SEL2KHRGXL
SEL2KHRGXXL
SEL2KHRG3XL
SEL2KHRG4XL
SEL2NVRGS
SEL2NVRGM
SEL2NVRGL
SEL2NVRGXL
SEL2NVRGXXL
SEL2NVRG3XL
SEL2NVRG4XL
SEL2ORRGS
SEL2ORRGM
SEL2ORRGL
SEL2ORRGXL
SEL2ORRGXXL
SEL2ORRG3XL
SEL2ORRG4XL
883248372692
036394986590
036394986606
036394986613
036394986620
883248452271
883248452288
883248963807
883248963791
883248963784
883248963814
883248963838
883248963753
883248963760
883248372784
036394986637
036394986644
036394986651
036394986668
883248452295
883248452301
883248239339
883248239322
883248239315
883248239346
883248239353
883248239360
883248239377
Gray — Regular, Small
Gray — Regular, Medium
Gray — Regular, Large
Gray — Regular, X-Large
Gray — Regular, XX-Large
Gray — Regular, 3X-Large
Gray — Regular, 4X-Large
Khaki — Regular, Small
Khaki — Regular, Medium
Khaki — Regular, Large
Khaki — Regular, X-Large
Khaki — Regular, XX-Large
Khaki — Regular, 3X-Large
Navy — Regular, Small
Navy — Regular, Medium
Navy — Regular, Large
Navy — Regular, X-Large
Navy — Regular, XX-Large
Navy — Regular, 3X-Large
Orange — Regular, Small
Orange — Regular, Medium
Orange — Regular, Large
Orange — Regular, X-Large
Orange — Regular, XX-Large
Orange — Regular, 3X-Large
Orange — Regular, 4X-Large
Available in long sizes — large to xx-large; contact your local WESCO Branch
for ordering information.
t
t
t
t
t
t
t
t
t
t
t
Excel-FR ComforTouch flame resistant
7 oz., 88% cotton /12% nylon
SLU2NV
HRC2
NFPA 2112 compliant
Banded, topstitched, button-down collar
Two chest pockets with button flap closures
and sewn-in pencil stall
Placket front with button closure
Topstitched cuff with button closure
Tailored sleeve plackets
Home and industrial wash
Mfr.’s Model No.
UPC#
Description
SLU2KHRGS
SLU2KHRGM
SLU2KHRGL
SLU2KHRGXL
SLU2KHRGXXL
SLU2KHRG3XL
SLU2LBRGS
SLU2LBRGM
SLU2LBRGL
SLU2LBRGXL
SLU2LBRGXXL
SLU2LBRG3XL
SLU2NVRGS
SLU2NVRGM
SLU2NVRGL
SLU2NVRGXL
SLU2NVRGXXL
SLU2NVRG3XL
SLU2RBRGS
SLU2RBRGM
SLU2RBRGL
SLU2RBRGXL
SLU2RBRGXXL
SLU2RBRG3XL
SLU2SYRGS
SLU2SYRGM
SLU2SYRGL
SLU2SYRGXL
SLU2SYRGXXL
SLU2SYRG3XL
883248258194
883248258187
883248258170
883248258200
883248258224
883248258231
883248373262
036394986552
036394986569
036394986576
036394986583
883248456743
883248258873
883248258866
883248258859
883248258880
883248258903
883248258910
883248569054
883248569047
883248569030
883248569061
883248569078
883248569085
883248259283
883248259276
883248259269
883248259290
883248259306
883248259313
Khaki — Regular, Small
Khaki — Regular, Medium
Khaki — Regular, Large
Khaki — Regular, X-Large
Khaki — Regular, XX-Large
Light Blue — Regular, Small
Light Blue — Regular, Medium
Light Blue — Regular, Large
Light Blue — Regular, X-Large
Light Blue — Regular, XX-Large
Light Blue — Regular, 3X-Large
Navy — Regular, Small
Navy — Regular, Medium
Navy — Regular, Large
Navy — Regular, X-Large
Navy — Regular, XX-Large
Royal Blue — Regular, Small
Royal Blue — Regular, Medium
Royal Blue — Regular, Large
Royal Blue — Regular, X-Large
Royal Blue — Regular, XX-Large
Royal Blue — Regular, 3X-Large
Silver — Regular, Small
Silver — Regular, Medium
Silver — Regular, Large
Silver — Regular, X-Large
Silver — Regular, XX-Large
Silver — Regular, 3X-Large
Available in long sizes — medium to xx-large; contact your local WESCO Branch
for ordering information.
21
SAFETY
Protective Clothing
SAFETY
Work-Dry® Lightweight
Twill Shirt
High-Visibility Long
Sleeve T-Shirt — Class 3
t 6-oz. twill; 88% cotton/12%
high-tenacity nylon
t Work-Dry® material wicks away
moisture for comfort
t Anti-odor fabric treatment
t Button-down collar with button closures
t Two chest pockets with flaps and
button closures
t Extended plackets with two-button
adjustable cuffs
FRS003-DNY
t FR melamine buttons throughout
t Carhartt FR label and HRC 2 label sewn on left pocket
t HRC — 2; ATPV — 8.7
and is UL® Classified to NFPA 2112
Khaki
Royal
Denim
Mfr.’s Model No.
Description
FRS003-KHI
FRS003-DNY
FRS003-RYL
FRS003-MBL
Khaki
Dark Navy
Royal
Medium Blue
t 6.5-oz. FR knit; 55% modacrylic/
45% cotton
t Rib-knit collar and cuffs
t Three-button front with
FR melamine buttons
t Side-seamed construction
minimizes twisting
t Left-chest pocket
t Inherently flame-resistant
t Carhartt FR label and HRC 2 label
sewn on pocket
t HRC — 2; ATPV — 9.8
Mfr.’s Model No.
Description
FRK293-DNY
FRK293-LGY
Dark Navy
Light Gray
22
Mfr.’s Model No.
Description
FRK003-BLM
Bright Lime
FRK003-BLM
Medium Blue
Duck Active Jacket/Quilt Lined
Long Sleeve Henley
Dark Navy
t 7.75-oz. FR knit: 61% modacrylic
32% cotton/7% polyester
t Rib-knit collar and cuffs
t Side-seamed construction
minimizes twisting
t Left-chest pocket
t 3M™ Scotchlite™ FR reflective
segmented materials
t Inherently flame-resistant materials
t Carhartt FR label and HRC 2 label sewn on pocket
t HRC — 2; ATPV — 10.0
t Meets ANSI Class 3, Level 2 visibility standards
t Meets ANSI/ISEA 107-2004 and the performance
requirements of NFPA 70E
FRK293-LGY
t 13-oz., 100% cotton duck
t 11.5-oz. FR quilt lining
t FR modacrylic batting quilted
to twill face cloth
t Two inside patch pockets with FR
hook & loop closures
t Nomex® FR rib-knit cuffs
and waistband
t Front zipper with Nomex® FR zipper
tape, inside & outside protective flaps
with hook & loop closures
for electric arc protection
t Attached quilt-lined hood with adjustable
Nomex® FR draw cord
t Carhartt FR label sewn on front pocket;
HRC 4 label sewn on zipper flap
t HRC — 4; ATPV — 54.3
Carhartt
Brown
Light Gray
Dark Navy
Mfr.’s Model No.
Description
FRJ184-BRN
FRJ184-DNY
Carhartt Brown
Dark Navy
FRJ184-BRN
Lamps & Lighting
In This Section
LED .............................................. 24
Fixtures—LED ..........................25–26
H.I.D. ............................................ 27
Fluorescent ..............................27–29
Floodlights..................................... 30
Wellglass....................................... 30
Stringlights .................................... 31
Hazardous Locations ..................... 31
Temporary Lighting ........................ 32
Handheld Lights ............................ 32
This is a
sampling of the
Lamps & Lighting
products that
WESCO offers.
23
23
LAMPS & LIGHTING
LED
Cooper Crouse-Hinds® Champ®
VMV LED Series Luminaires
LAMPS & LIGHTING
True wide-area illumination LED luminaires
for harsh and hazardous areas
t Energy-efficient technology uses only half the
power of standard HID luminaires
t Provide up to 60,000 hours rated life,
eliminating the need for frequent
lamp replacement
t Contractor-friendly design is ideal for both
retrofit and new construction applications
t LED housing is constructed of durable die cast
aluminum, providing an efficient thermal
path to the heat sink assembly
t Contain no mercury or other hazardous substances
t Shock- and vibration-resistant
t Cl. I, Div. 2, Groups A, B, C, D; Cl. I, Zone 2; Cl. II, Groups E, F, G
t ATEX and IECEx models available
Cooper Crouse-Hinds® Champ® FMV
LED Series Floodlight
Half the energy consumption of HID floodlights, better lumen output,
and no maintenance
t Suitable for hazardous location use in
gas or dust areas
t Four models equivalent to 100-400W
metal halide floodlights
t Designed to utilize the SFA6 slipfitter and
SWB6 wall mount bracket, making it ideal
for retrofit or new installations
t Industry-accepted butterfly
beam light pattern
t Available in warm or cool white
color temperatures
t Available with visor for dark skies compliance and
a guard for added protection
t Cl. I, Div. 2, Groups A, B, C, D; Cl. I, Zone 2;
Cl. II, Groups E, F, G
Cooper Crouse-Hinds®)B[BSEt(BSE® EVLL
Series Explosionproof LED Luminaires
An energy-efficient and globally certified explosionproof workhorse for
general area and high bay lighting applications
t Adapter available for connection to existing
)B[BSEt(BSE® EVI, EVLP and EVM modules
t Quick connect design – install and wire the
mounting module, then simply screw in the
luminaire
t Factory sealed – no external sealing fittings
required in Groups B, C and D
t 60,000 hours rated life eliminates the
need for frequent lamp replacement
t Shock- and vibration-resistant –
solid-state luminaires have no filaments or
glass components that could break, greatly
reducing the risk of premature failure.
t Cl. I, Div. 1, Groups B, C, D; Cl. I, Zone 1,
Groups IIB + H2, IIB, IIA
24
Cooper Crouse-Hinds® Vaporgard™ LED Luminaire
An ideal replacement for traditional 100-200W incandescent applications
t Designed to provide uniform, crisp light
suitable for low mounting heights and
confined spaces where incandescent and
HID based luminaires are too large
t Retrofittable to existing Cooper
Crouse-Hinds Vaporgard fixtures
t Instant illumination and restrike
t 25W LED system can save up to
85% in energy costs
t Available in warm or cool white
color temperatures
t Optional frost lens and Teflon coated lens
t Cl. I, Div. 2, Groups A, B, C, D
Cooper Crouse-Hinds® Pro Series
Industrial LED Luminaires
Used in industrial areas requiring frequent on-and-off of lights, and
areas that are difficult to relamp or that cause production to be stopped
during the lamp maintenance process
t Heat sinks are specifically engineered to
remove heat from the LEDs and drivers
to ensure longer life, butter lumen
output and accurate color temperature
t Compact modular fixtures
attach to existing Cooper
Crouse-Hinds installed mounting
modules, reducing
installation costs
t Long life LEDs
eliminate
maintenance costs
t UL1598; UL1598A;
cUL Listed
t NEMA 4X;
IP66 rated
Cooper Crouse-Hinds® EV LED Series
Explosionproof LED Luminaires
Used where flammable vapors, gases,
ignitable dusts, fibers or flyings are present;
indoors and outdoors
t Compatible with existing EV Series mounting
modules, which reduces retrofit installation time
and materials costs, and makes new construction
installation easy
t Certified by the International Dark Sky Association
as Dark Sky Compliant, virtually no light
pollution will escape up into the atmosphere
t 20 times longer life than incandescents in
tough-to-maintain Division 1 locations
t Cl. I, Div. 1, Groups C, D; Cl. I, Zone 1 & 2,
Group IIB; Cl. II, Groups E, F, G; Cl. III
Simultaneous Presence
t UL Listed and CSA Certified
Fixtures — LED
LAMPS & LIGHTING
Cooper Lighting Ventus LED Area/Site Lighting
Uncompromising optical performance and outstanding versatility
Mfr.’s Model No.
Description
VTS-B12-LED-E1-T3-BZ
VTS-B12-LED-E1-5WQ-BZ
Type III AccuLED Optics; Bronze; 12-IP66 Rated LightBARs; 120-277V Driver
Type V Square Wide AccuLED Optics; Bronze; 12-IP66 Rated LightBARs; 120-277V Driver
LAMPS & LIGHTING
t Patent-pending modular IP66 Rated LightBAR™ technology delivers uniform and energy-conscious illumination
t Available with 13 patented AccuLED Optics™ to illuminate your site requirements, including a family of
proprietary Spill Control Optics that drastically reduces spill light behind the luminaire
t Durable 3G Vibration-Rated die-cast aluminum construction, stainless steel hardware;
ships with 6" arm and round pole adapter with the fixture
t Reliable operation in -30˚ C (-22˚ F) to 40˚ C (104 ˚ F) ambient temperature environments,
a proprietary 10kV fused circuit module, 50,000 hours, 5-year warranty, and is UL®/CUL Listed
t Select from up to 13 optical distribution types. Locate IES Photometric files on www.cooperlighting.com/LED.
Contact your local WESCO branch for additional configurations
Cooper Lighting Valet LED Canopy/Area Lighting
Provide up to 75% energy savings over traditional sources
t Rugged and low-profile die-cast aluminum housing construction
t Patent-pending modular IP66 Rated LightBAR™ technology delivers uniform and energy-conscious illumination
t Durable 3G Vibration Rated IP65 die-cast aluminum construction, stainless steel fasteners, -30˚ C to 40˚ C (104˚ F)
ambient temperature rating, a proprietary 10kV fused circuit module, 50,000 hours, and is UL®/CUL Listed
t Available with eight patented AccuLED Optics™ to meet your site illumination requirements, including a family of
proprietary Glare Control Optics that shield high-angle light and reduce source brightness from oncoming traffic
t Select from up to 8 optical distribution types. Locate IES Photometric files on www.cooperlighting.com/LED.
Contact your local WESCO branch for additional configurations
Mfr.’s Model No.
Description
VPL-B02-LED-E1-SQ-AP
Type V Square AccuLED Optics; Grey; 2-IP66 Rated LightBARs; 120-277V Driver
Cooper Lighting Lumark® Crosstour™ LED Wallpack or Floodlighting
Enables simple installation to all standard junction boxes without the use of adapter plates or loose hardware
t Superior optical performance, a low-profile aesthetic design, and the
industry’s first universal “all-in-one” product design (patent pending)
t Energy-efficient LED technology replaces up to 175W metal halide
fixtures — and provides up to 90% energy savings!
t Three LED lumen packages — 10W (720 lumens), 20W (1360
lumens), and 30W (2240 lumens)
t Bright 5000K and neutral warm 3500K (CCT)
t Two housing sizes: small (5-3/4"W x 6-3/4"H x 3-5/8"D) and
large (6-5/8"W x 8"H x 4"D)
t Optional photocontrol models
t Floodlight Kit
t IP66 rated, UL®/cUL wet location,
40˚ C ambient temperature rating
t ADA, ARRA, RoHS, and Title 24 Compliant
t 50,000 hours rated life
t Five-year warranty
Mfr.’s Model No.
Description
XTOR1A
XTOR1A-PC1
XTOR1A-WT
XTOR2A
XTOR2A-N
XTOR2A-PC1
XTOR2A-WT
XTOR3A
XTOR3A-N
XTOR3A-PC1
XTOR3A-WT
WG/XTOR
10W, 120V Driver; 5000K LED Kelvin (CCT); Carbon Bronze; 70W HID Equivalent
10W, 120V Driver; 5000K LED Kelvin (CCT); Carbon Bronze; 120V PC Photocontrol; 70W HID Equivalent
10W, 120V Driver; 5000K LED Kelvin (CCT); Summit White; 70W HID Equivalent
20W, Universal 120–277V Driver; 5000K LED Kelvin (CCT); Carbon Bronze; 150W HID Equivalent
20W, Universal 120–277V Driver; 5000K LED Kelvin (CCT); Carbon Bronze; 120V PC Photocontrol; 150W HID Equivalent
20W, Universal 120–277V Driver; 5000K LED Kelvin (CCT); Summit White; 150W HID Equivalent
30W, Universal 120–277V Driver; 5000K LED Kelvin (CCT); Carbon Bronze; 120V PC Photocontrol; 175W HID Equivalent
30W, Universal 120–277V Driver; 5000K LED Kelvin (CCT); Summit White; 175W HID Equivalent
Galvanized Coated Steel Wire Guard Option Prevents Lens Damage from Projectiles
25
LAMPS & LIGHTING
Fixtures — LED
LED Vaportite
LAMPS & LIGHTING
These new, highly efficient low-maintenance LED Vaportite fixtures are designed for maximum
versatility and offered in four mounting configurations: pendant, ceiling, wall outlet, and stanchion
mount. LED vaportite fixtures deliver high-quality light superior to traditional used incandescent fixtures.
t
t
t
t
Long LED life, up to 50,000 hrs
Very low energy use - less than 20 watts per fixture
Ideal for retrofit of existing incandescent fixtures
120-277V universal power supply
t Available in frosted glass globe or acrylic flat lens that
delivers up to three times the light levels of incandescent
t Units are listed to UL®1598 for use in wet locations
t Crisp white 5000K color
Mfr.’s Model No.
UPC#
Description
VL15P2G
VL15P2A
VL15W2G
VL15W2A
VL15X2G
VL15X2A
785988021154
785988022021
785988022038
785988022045
785988022069
785988022137
LED Vaportite, Pendant, 3/4" Hub, Glass Globe
LED Vaportite, Pendant, 3/4" Hub, Acrylic Lens
LED Vaportite, Wall, 3/4" Hub, Glass Globe
LED Vaportite, Wall, 3/4" Hub, Acrylic Lens
LED Vaportite, Ceiling, 3/4" Hub, Glass Globe
LED Vaportite, Ceiling, 3/4" Hub, Acrylic Lens
VL15P2A
VL15W2A
LED technology
expertise
WESCO can help you understand how
to best incorporate the latest LED
technology. There are many options on
the market, and our team can develop a
strategy to utilize LED technology from
the top manufacturers to meet your
specific goals.
Benefits of LED technology
s Long service life, improved uniformity, efficiency
s Directional light emission — directing light where it is needed
s Size advantage — can be very compact and low profile
s Breakage resistance — no breakable glass or filaments
s Cold temperature operation — performance improves in the cold
s Instant ON — require no warm up time
s Rapid cycling capability — lifetime not affected
by frequent switching
s Controllability — compatible with electronic controls
to change light levels and color characteristics
s No IR or UV emissions — LEDs intended for lighting do not emit
infrared or ultraviolet radiation
s No mercury concern
Harsh & Hazardous environment applications
that benefit the most from LED technology
s Outdoor area lighting
s Elevator lighting
s Step and path lighting
s Wide-area lighting
s Spaces with occupancy sensors
s Floodlighting
s Exit signs
s Emergency lighting
26
H.I.D., Fluorescent
LAMPS & LIGHTING
Cooper Crouse-Hinds® Champ® VMV Series
HID Luminaires
Cooper Crouse-Hinds® Champ® DMV Series
HID Luminaires for Combustible Dusts
Used in areas where ignitable concentrations of flammable
gases or vapors will be present only due to abnormal, unusual,
or accidental conditions
Used in areas where combustible dusts and flammable vapors are
present simultaneously
Cooper Crouse-Hinds®)B[BSEt(BSE® EVLS, EVLP
and EVM Series Explosionproof HID Luminaires
Perfect for general area or spot lighting applications
in indoor or outdoor hazardous locations
t EVLS - compact and rugged, Division 1
luminaire that fits in tight spaces
t EVLP - small, compact size is perfect where
low mounting restrictions are a concern
t EVM - paint spray booth suitability on 50-100W
luminaires provides efficient, economical
HID lighting for areas where paint residue
may accumulate on luminaires
t All available in pendant mount, wall bracket mount,
ceiling mount, and stanchion mount
t All available with HPS, metal halide, and
pulse start metal halide lamps
t Cl. I, Div. 1, Groups B, C, D; Cl. I, Zone I,
Groups IIB + H2; Cl. II and Cl. III
Cooper Crouse-Hinds® eLLK Series™
Fluorescent Non-Metallic Luminaires
Used in hazardous areas where moisture or corrosion may be problematic
t Lamps operate
independently – one lamp
failure will not affect
remaining lamp operation
t Standard bi-pin lamps are
energy-efficient and cost-effective
t Interlocked switch automatically cuts
power to both lamps and ballast when
the lens is opened
t Removable lens is hinged on both sides for
easy installation and maintenance
t Battery back-up feature operates one lamp for 1-1/2 hours should the power go out
t Cl. I, Div. 2, Groups B, C, D; Cl. I, Zone 1,
Group IIC; Cl. II, Div. 2, Groups F, G
t ATEX Certified, GOST-R and GOST-K Certified
t Cast copper-free aluminum construction (less than 0.4 of 1% copper) and epoxy
powder finish provide excellent resistance to corrosion
t Seven mounting arrangements to suit any lighting layout
t Wide range of light sources and wattages (50W-250W)
t Hinged ballast housing for ease of installation and maintenance
t Superior gasketing seals between the
mounting module, housing, and optical
assembly for optimum performance in wet
and corrosive environments
t Dome and 30° angle reflectors made of
Krydon® material provide superior reflectivity, with
twist-on feature requiring no tools or additional
hardware; will not chip, peel, dent, rust, or corrode
t Stainless steel open bottom guard permits
direct access to the globe for easy relamping
t Cl. I, Div. 2, Groups A, B, C, D;
Cl. II, Div. 2, Groups E, F, G
t Available with Restricted Breathing
construction for Zone 2 suitability
Cooper Crouse-Hinds® Pauluhn™ Intrepid Series
Linear Fluorescent Luminaires
Ideal for use in hazardous locations with marine, watertight,
and dust-tight requirements
t Available in stainless steel, aluminum
or non-metallic construction
t Available in industrial and
hazardous area designs
t Third party certified for operation in high ambient temperatures, up to 65°C (149°F)
t Stainless steel latches, mounting feet and lens retainers
t Impact-resistant UV stabilized polycarbonate lens
t ShoczLoc™ bi-pin spring loaded lamp holders for T5, T5 HO, T8 and T12 lamp types
provide superior resistance to shock and vibration
t Three lamp models are provided with (1) 1-lamp ballast and (1) 2-lamp ballast for
independent switching
t Cl. I, Div. 2, Groups A, B, C, D; Cl. I, Zone 2,
Groups IIA, IIB, IIC; Cl. II, Div. 2, Groups F, G
t ABS and NSF approvals
Cooper Crouse-Hinds® Pauluhn™ Commander Series
Explosionproof Linear Fluorescent Luminaires
Ideal for use in explosive atmospheres with marine,
watertight, and dust-tight requirements
t Available in aluminum or brass
construction for extreme corrosion resistance
t High output luminaire, up to 40,000 raw lumens
t Available with two T5HO lamps in each globe assembly
t Ease of maintenance with factory sealed, field replaceable globe assemblies
t Impact-resistant Borosilicate glass tubes
t Re-lamping from either end of the luminaire allows for flexible positioning
t Integral safety cable mounting points
t Spring loaded lamp holders for maximum vibration resistance
t Cl. I, Div. 1, Groups C, D; Cl. II, Zone 1,
Groups IIA, IIB; Cl. II, Div. 1 & 2, Groups E, F, G
t ABS approval
27
LAMPS & LIGHTING
t Compact, lightweight design is ideal for medium and low mounting heights
t Cast copper-free aluminum construction (less than 0.4 of 1% copper) and epoxy
powder finish provide excellent resistance to corrosion
t Seven mounting arrangements to suit any lighting layout
t Wide range of light sources and wattages
(50W-400W)
t Hinged ballast housing for ease of
installation and maintenance
t Superior gasketing seals between the mounting
module, housing, and optical assembly for
optimum performance in
wet and corrosive environments
t Glass globes, refractors and reflectors available
t Cl. I, Div. 2, Groups A, B, C, D;
Cl. II, Div. 2, Groups E, F, G
t Available with Restricted Breathing
construction for Zone 2 suitability
LAMPS & LIGHTING
Fluorescent
Appleton® FD Series Standard Version Cylindrical
Fluorescent Luminaires—Flameproof
Appleton® FE Series Nonmetallic Fluorescent
Luminaires—Increased Safety
LAMPS & LIGHTING
FDB236X3M
t
t
t
t
t
t
t
t
t
Can be installed in hazardous areas designated as Zone 1 & 2 and 21 & 22
ATEX/IECEx/II 2 GD
For bi-pin (G13) fluorescent lamps—T8 (26mm) or T12 (38mm)
240V, 50 Hz, magnetic ballast, starter ignition, compensated power supply,
power factor > 0.9
Easy access to lamps through grey-painted Zamak threaded entry cap
Impact-resistant borosilicate glass sealed tube; impact resistance (shock), IK08
Supplied with external and internal ground/earth connection
Two M20 threaded entries, supplied with one M20 aluminium blanking plug;
connection via 1 x 3 double deck terminals
Capacity (flexible/solid), 0.75 mm² to 2.5mm²
Mfr.’s Model No.
Description
FDB218X3M
No. of Lamps: 2; Watts: 18; Gas Group:
IIC; Weight: 9.7 kg; Volume: 58 dm³
IIB+H2; Weight: 15.3 kg; Volume: 99 dm³
IIB; Weight: 17 kg; Volume: 119 dm³
IIB; Weight: 18.2 kg; Volume: 119 dm³
FDB236X3M
FDB158X3M
FDB258X3M
Appleton® FDES Series Self-Contained
Emergency Luminaires—Flameproof
t Can be installed in
hazardous areas
designated Zone 1 & 2
and 21 and 22
t ATEX/IECEx/II 2 GD
t Power supply from 110 to
FDES1083N
240 VAC 50/60 Hz versions
t Threaded access opening with O-ring seal—IP66/68
t Three-hour duration
t Operates in any position
t Charge indicator by one red LED (life time more than 10 years)
t Termination 3 or 4 x 2.5 mm² lugs
t Includes two fixing (mounting) lugs
t Operating temperature -40˚ C to 55˚ C; optimum
operating temperature for battery is -5˚ C to 30˚ C
t Includes two M20 threaded cable entries and one M20 blanking plug
Mfr.’s Model No.
Description
FDES1083N
1 x 8 W Fluorescent, Non-Maintained; Lumen Output: 230 lm;
Voltage: 230/240; Frequency: 50/60 Hz; Weight: 7.8 kg;
Volume: 36 dm³
FDES1081N
1 x 8 W Fluorescent, Maintained; Lumen Output: 180 lm; Voltage:
110; Frequency: 50/60 Hz; Weight: 7.8 kg; Volume: 36 dm³
FEB236BUSN
t
t
t
t
t
t
For use in areas designated Zone 1 & 2 and 21 and 22
Latch assembly and elastomeric gasket seal against water and dust ingress IP66/67
Easily accessed for maintenance using Allen key or straight blade screwdriver
ATEX/IECEx/II 2 GD
Hinged parabolic reflector for high lumen output efficiency
Positive safety switch disconnects power to lamps and ballast to allow
maintenance in hazardous locations
t Electronic multi-tap ballast 110/254 VAC/VDC +/- 10% 50/60 Hz,
for global applications
t Unarmoured version—furnished with three M25
threaded connections, two at one end and one at
the opposite end; includes one M25 polyamide
cable gland and two M25 polyamide plugs
Standard Wiring Version
t High impact-resistant housing (20 Joules - IK10) from -40˚ C to 55˚ C ambient
temperature, and wind profile for use in extreme offshore and onshore environments
t Connection via 1 x 6 terminals—capacity (flexible/solid), 4mm²/6mm²
Mfr.’s Model No.
Description
FEB118BUSN
No. of Lamps: 1; Watts: 18; Lamp Type: G13;
Voltage: 110/254; Weight: 5.5 kg; Volume: 32.3 dm³
Voltage: 110/254; Weight: 9 kg; Volume: 65 dm³
FEB218BUSN
FEB136BUSN
FEB236BUSN
FEB336BUSN
FEB158BUSN
FEB258BUSN
FEB358BUSN
Emergency Battery Back-Up Version
t Three-hour emergency version—battery 6 V-4 Ah
t Connection via 1 x 4 terminals for 18 W version; connection via 1 x 8 terminals for
36W and 58W versions; capacity (flexible/solid), 4mm²/6mm²
Mfr.’s Model No.
Description
FEB218BUSNE
Voltage: 110/254; Weight: 10.7 kg; Volume: 65 dm³
FEB236BUSNE
FEB336BUSNE
FEB258BUSNE
FEB358BUSNE
28
Fluorescent
Appleton® FL Series Light-Duty Fluorescent
Luminaires—Zone 2 & 22
Standard Version
t ATEX/IEC/II 3 GD
t Includes one M20 cable entry with
earth continuity at each end, two M20
t Poured-in-place elastomeric gasket
locknuts, and one M20 blanking plug
secures IP65/67 ingress protection
t
For use with armoured and unarmoured
t Fiberglass-reinforced polyester housing
cable; includes one 2 x (3 x 2.5 mm²)
t Ambient temperature—-20˚ C to 55˚ C
max. flexible or rigid connection
t Closing system using stainless steel clips terminal block
t Electrostatically applied white powder
painted steel reflector provides optimal
lighting distribution
Mfr.’s Model No.
Description
FLB118BKSA
No. of Lamps: 1; Watts: 18; Voltage: 220/240; Weight: 2.3 kg;
Volume: 22.3 dm³
Volume: 22.3 dm³
Volume: 38 dm³
Volume: 38 dm³
Volume: 45 dm³
Volume: 45 dm³
FLB218BKSA
FLB136BKSA
FLB236BKSA
FLB158BKSA
FLB258BKSA
Appleton® FN Series Heavy-Duty
Nonmetallic Luminaires
FNB236BKSNN
t For use in areas designated Zone 2, 21, and 22
t Latch assembly and elastomeric gasket seal against water and dust ingress IP66/67
t High impact-resistant housing (20 Joules - IK10) from -40˚ C to 55˚ C ambient
temperature, and wind profile for use in extreme offshore and on shore environments
t ATEX/IECEx/II 3 GD and II 2 D
t Ambient temperature— -40˚ C to 55˚ C
t Central opening with unique release system to prevent damage
t Hinged parabolic reflector for high lumen output efficiency
t Three M25 threaded entries, two at one end and one at the opposite end, supplied with
one M25 polyamide cable gland and two M25 polyamide blanking plug
Standard Version
t Unarmoured version
t Connection via 1 x 6 terminals—capacity (flexible/solid), 4 mm²/6 mm²
Mfr.’s Model No.
Description
FNB218BKSNN
FNB236BKSNN
FNB258BKSNN
t For use with unarmoured cable; connection via 1 x 4 terminals for 18W version;
connection via 1 x 8 terminals for 36W and 58W versions; capacity (flexible/solid),
4mm²/6mm²
t Three-hour duration—battery capacity 4 Ah
Mfr.’s Model No.
Description
FNB218BUSNEN
FNB236BUSNEN
FNB258BUSNEN
t Battery voltage—6V; 4 Ah capacity
t One fluorescent tube remains lit for up to three hours and up to
29% light intensity for 18W, 15% for 36W, and 9% for 58W
t All emergency units supplied with cut-off switch to battery when fixture is open
Mfr.’s Model No.
Description
FLB218BUSAE
Volume: 22.3 dm³
No. of Lamps: 2; Watts: 36; Voltage: 110/254; Weight: 7 kg;
Volume: 38 dm³
Volume: 45 dm³
FLB236BUSAE
FLB258BUSAE
29
LAMPS & LIGHTING
t ATEX/IEC/II 3 GD
t Poured-in-place
elastomeric gasket
secures IP65/67
FLB218BKSA
ingress protection
t Fiberglass-reinforced polyester housing
t Ambient temperature—-20˚ C to 55˚ C
t Closing system using stainless steel clips
t Electrostatically applied white powder painted steel reflector provides
optimal lighting distribution
t Includes one M20 cable entry with earth continuity at each end, two M20 locknuts,
and one M20 blanking plug
t For use with armoured and unarmoured cable;
includes one 2 x (3 x 2.5 mm²) max. flexible or
rigid connection terminal block
LAMPS & LIGHTING
LAMPS & LIGHTING
Flood, Wellglass
LAMPS & LIGHTING
Appleton® PN Series Floodlights—Zone 2, 21 & 22
t
t
t
t
t
t
t
t
ATEX/IECEx/II 2 D/11 3 GD
Ingress protection IP66
Impact resistance IK07
Integral ballast; 230/240 V, 50 Hz
Socket E40 (E27 for 70 W HPS version)
Yoke mounting
One-piece lens cover
Reflectors—double segment compound parabolic
with Alzak finish for maximum efficiency
t Simple installation and maintenance
Mfr.’s Model No.
PNM1L70AGXJ
Description
PNM1L70AGXJ No. of Lamps: 70W HPS; Permissible Lamps: Ovoid/Tubular; Body
Size: Medium; Weight: 12.1 kg; Volume: 62.5 dm³
PNM1L15AGXJ No. of Lamps: 150W HPS; Permissible Lamps: Ovoid/Tubular;
Body Size: Medium; Weight: 12.9 kg; Volume: 62.5 dm³
Body Size: Medium; Weight: 14.3 kg; Volume: 62.5 dm³
Body Size: Medium; Weight: 16 kg; Volume: 62.5 dm³
Appleton® PB Series Floodlights—Flameproof
t For use in hazardous areas designated
as Zone 1 & 2 and Zone 21 & 22
t ATEX/IECEx/II 2 GD
t Index of protection IP66
t Impact-resistance (shock) IK10
t For use with either tubular or
PBAL40XJB
ellipsoidal shape lamps
t Electrical components (ballast, igniter, and capacitor) are thermally separated from
the lighting compartment with a bulkhead, providing extended life
t Fast and easy lamp replacement via threaded cover on the side of the fixture
t Two feed-through M20 cable entries; includes
one Ex e unarmoured cable gland,
one M20 blanking plug, and two M20 locknuts
Appleton® LDP Series Wellglass
Luminaires—Flameproof
t For use in hazardous areas designated as
Zone 1 & 2 and Zone 21 & 22
t ATEX/IEC/II 2 GD
t Index of protection IP66
LDP2075
t Impact resistance IK08
t Suspension via integrated eye bolt for side cable entry versions
t Permissible lamps (not supplied)—18–25W compact fluorescent,
70–150W halogen lamps, up to 200W incandescent, up to 160W mixed lamps
t E27 lampholder
t Includes one blanking plug for side cable entry versions
t Connection to lampholder—
(2 x 2.5mm²) or to terminal block
Mfr.’s Model No.
Description
LDP2075
Cable Entries: 2 x 3/4" NPT; Weight: 5 kg; Volume: 35.5 dm³
Appleton® LN Series Wellglass
Luminaires—Zone 2 & 22
t
t
t
t
t
t
t
t
t
t
ATEX/IEC/II 3 GD
Ingress protection IP66
Power supply 230/240V (+6% - 10%) 50 Hz
Connection via terminal block (2 x 4 mm² max.)
Wide choice of light sources—high pressure sodium,
metal halide, mercury vapor, and incandescent
LN1CL70AG2XJ
All fixtures designed to perform in a
-40˚ C ambient temperature up to 55˚ C
One-piece ballast housing for each component provides even heat dissipation for
cooler operation and longer ballast life
Hinge has high lip for added safety during installation and servicing
Fixture bodies are provided with two silicone rubber O-Ring style gaskets that will stay
flexible and assure even compression
5 x 1" NPT openings supplied with—
4 x 1" NPT fitted plugs, 2 x 1" NPT-M20 adapters,
and 2 x M20 Plugs
Mfr.’s Model No.
Description
Mfr.’s Model No.
PBAL25XJB
Lamp Wattages: 250W HPS; Lampholder: E40;
Voltage: 230/240 V 50 Hz; Weight: 30.3 kg; Volume: 79.4
dm³; Tubular & Ellipsoidal Lamp
LN1CL70AG2XJ
PBAL40XJB
Lamp Wattages: 400W HPS; Lampholder: E40;
dm³; Ellipsoidal Lamp
PBAM25XJB
Lamp Wattages: 250W MV; Lampholder: E40;
dm³; Tubular & Ellipsoidal Lamp
30
Description
Watts: 70; Lamp Type: HPS; Lampholder: E27; Weight: 7.4 kg;
Volume: 39 dm³; Mounting Type: Ceiling
LN2CL10AG2XJ Watts: 100; Lamp Type: HPS; Lampholder: E40; Weight: 9 kg;
Volume: 85.2 dm³; Mounting Type: Ceiling
LN1CZ10AG2
Watts: 100; Lamp Type: Inc.,Halogen; Lampholder: E27; Weight:
7.4 kg; Volume: 39 dm³; Mounting Type: Ceiling
LN1CZ15AG2
Watts: 150; Lamp Type: Inc.,Halogen; Lampholder: E27; Weight:
7.4 kg; Volume: 39 dm³; Mounting Type: Ceiling
LN1CM12AG2XJ Watts: 125; Lamp Type: Mercury Vapour; Lampholder: E27;
Weight: 7.4 kg; Volume: 39 dm³; Mounting Type: Ceiling
Weight: 14 kg; Volume: 70 dm³; Mounting Type: Ceiling
Weight: 19 kg; Volume: 85.2 dm³; Mounting Type: Ceiling
Stringlights, Hazardous Locations
Woodhead® Super-Safeway® Stringlights
Woodhead® Pro-Yellow® Stringlights
t Feature 10 lamp sockets spaced
at 10’ intervals
t Include plastic lamp guards
t UL® Listed and CSA Certified (302SRL only)
t 100’ standard length
t Maximum lamp size: 150W A23 for 302SRL
and 202SRL, 100W for STR100
323526
LAMPS & LIGHTING
t Ideal for lighting large work areas
t Easy-to-replace parts ensure quick,
convenient serviceability
t Light sockets are spaced at 10’ intervals
t Can easily be set up for 12–240V operation
t Length — 323526: 50'; 310123 and 320128: 100'
t Rubber cable S00W and rubber socket
t Maximum lamp size: 150WA23
LAMPS & LIGHTING
302SRL
Mfr.’s Model No.
Description
Mfr.’s Model No.
Description
323526
310123
320128
Conductor: 12/3, NEMA 5-15 Plug/5-15 Connector, 50'
Conductor: 12/3, NEMA 5-15 Plug/Dead End, 100'
Conductor: 12/3, NEMA 1-15 Plug/1-15 Connector, 100'
302SRL
STR100
202SRL
5030
Conductor: Flat Wire, 12/2, NEMA 1-15 Plug/Dead End, 100'
Conductor: Open, #14 AWG, 100'
Conductor: Flat Wire, 14/2, 100'
Conductor: 14/2 SJTW, 100', Economy
Woodhead® Wide-Area Fluorescent Light for Hazardous Locations
t
t
t
t
t
t
t
t
Twin 55W CFL lamps for high output and impact resistance
Rubber lamp bumper protects from vibration
Various cord and plug configurations available; contact your local WESCO Branch for ordering information
1/4 turn fasteners achieve tool-to-enter requirements without locks, wire ties, or tag out
Mounting brackets adjust 360˚ for easy mounting, or to serve as handles
NEMA 3R enclosure rating
Single-ballast design for ease of maintenance and repair
QPS certified for Class I, Division II applications
1075HZ25025143
Mfr.’s Model No.
Description
1075HZ25025143
1075HZ25050413
1075HZ2X025143X025
1075HZ2X025143X050
1075HZ2X003123X003
1075HZ2F003143F003
1075HZ2F003123F003
1075HZ2N000
Rapid Start Ballast; 25' #14-3 SOW, 5-15 WTT Plug/Conn, 120-277 VAC, 60 Hz, -50˚ C to 40˚ C Operating Temp.
Rapid Start Ballast; 50' #14-3 SOW, 5-15 WTT Plug/Conn, 120-277 VAC, 60 Hz, -50˚ C to 40˚ C Operating Temp.
Rapid Start Ballast; 25' #14-3 SOW, XP Plug/Conn, 120-277 VAC, 60 Hz, -50˚ C to 40˚ C Operating Temp.
Rapid Start Ballast; 3' #14-3 SOW, Flying Leads, 120-277 VAC, 60 Hz, -50˚ C to 40˚ C Operating Temp.
Rapid Start Ballast; 3' #12-3 SOW, Flying Leads, 120-277 VAC, 60 Hz, -50˚ C to 40˚ C Operating Temp.
Rapid Start Ballast; No Cable or Cord Grips, 120-277 VAC, 60 Hz, -50˚ C to 40˚ C Operating Temp.
Woodhead® Wide-Area Portable Floodlight for Hazardous Locations
t
t
t
t
t
t
t
t
CSA Certified for use in the U.S. and Canada (cCSAus)
Class I, Division 1, Groups C & D, T3 (160˚ C)
NEMA 4X
Rugged cast aluminum enclosure
2300W quartz halogen lamps (10,400 lumens)
Easy lamp replacement
Articulating, adjustable heads
Includes carrying cases and hazardous location-rated NEMA 5-15 plug
Mfr.’s Model No.
Description
S2300-HZX050163
S2300-HZX025163
Light with 50' 16/3 and XP Plug
Light with 25' 16/3 and XP Plug
S2300-HZX025163
31
LAMPS & LIGHTING
Temporary Lighting, Handheld Lights
LAMPS & LIGHTING
Woodhead® Temporary
Lighting Wet Location,
Incandescent — 100W
Woodhead® Super-Safeway® Series
Fluorescent Handheld Lights
t
t
t
t
t
t
t
Woodhead offers the industrys
only portable stringlight assembly
that is CSA Certified as a complete
assembly for use in wet-location
areas. Assembly includes 600V
rated SOW cord, molded “T” drops,
and various Woodhead wet-location
hand lamps.
t 45' 12/3 SOOW cord
t 18" 14/3 SOOW drops
380310A
Mfr.’s Model No.
Description
380010A
100W Max., 115' 12/3 SOOW Primary Cord, 14/3 Drop Cord,
A21 Lamp Type, 10 Drops
380310A
380510A
Woodhead® Temporary
Lighting Hazardous-Duty,
Incandescent — 100W
Woodhead offers the only portable,
hazardous-duty stringlight that is
third-party (CSA) certified as a
complete assembly for use in
hazardous areas. Assembly includes
25' lead, 600V rated SOW cord,
molded “T” drops spaced at 10'
intervals, and various Woodhead
Haz-Duty hand lamps.
t 5-15 NEMA plug
t 45' 12/3 SOOW cord
t 18" 14/3 SOOW drops
Bright, diffuse illumination for all spaces
Ideal for work areas where heat build-up is a concern
Durable, protective clear plastic tube
ON-OFF switch in handle
Available in lumen ratings from 900 to 12,600
Battery-powered fluorescent operates up to eight hours
Battery-powered LED operates up to three weeks continously
1003-3
1083-3
Mfr.’s Model No.
Description
1083-3B
Lamp: 13W Fluor, Ballast: 12V Battery Pack with Charger,
6' Handle Cord, Rubber
Lamp: 13W PL, Ballast: 120V, Handle-Mounted,
25' #16/3 SJTOW Handle Cord, Rubber
Lamp: 13W PL, Ballast: 120V, Cord-Mounted,
Lamp: F8T5CW, Ballast: 120V, Handle-Mounted,
Lamp: F30T8CW, Ballast: 120V, Cord-Mounted,
25' #18/3 SJOOW Handle Cord, Rubber
1086-3
1083-3
1097-3
340310A
t Class I Division I, Groups C & D
t Class II Division I, Groups F & G
t Class I Zone I, Group IIB
1099-3
1049
1003-3
1005-3
1013-3
Mfr.’s Model No.
Description
340310A
NEMA 5-15, A21 Lamp Type, 3 Drops
NEMA 5-15, A21 Lamp Type, 5 Drops
340510A
1013-3S
1015-3
Woodhead® Haztex® Hazardous-Duty Hand Lamps, Fluorescent — 26W
t Meet the stringent specifications of NEC® Article 500
t UL® Listed and CSA Certified for Class I Division I, Groups C & D (flammable gases
and vapor) and Class II Division I, Groups F & G (ignitable dust)
t Also UL Class I Zone I, Group IIB
t All 120V lamps feature a Super-Safeway® NEMA 5-15 plug and #16/3 SOOW cord
t For hazardous-duty and conductive locations, choose a 12V lamp
Mfr.’s Model No.
Description
1090-HZA163
1090-HZB163
1090-HZD163
1090-HZ12A163
1090-HZ12B163
120V, 60 Hz, 1800 Lumens, PL-C 26/41/4P Lamp Type, 34-0391 Replacement Lamp, 25' #16/3 SOOW Cord*
12V, 1800 Lumens, PL-C 26/41/4P Lamp Type, 34-0391 Replacement Lamp, 25' #16/3 SOOW Cord
12V, 1800 Lumens, PL-C 26/41/4P Lamp Type, 34-0391 Replacement Lamp, 50' #16/3 SOOW Cord
* For a #14/3 SOOW cord, change the last three digits of the Mfr.’s Model No. to 143.
32
Conduit, Boxes, & Raceway
In This Section
Conduit Bodies & Boxes .....34–36, 38
Sealing Fittings ........................ 36, 38
Device Boxes ................................ 37
Junction Boxes ............................. 37
Compound.................................... 38
WESCO & Thomas & Betts .......40–41
Channel ........................................ 42
Channel Nuts ................................ 42
Strut Systems................................ 43
Cable Ladders............................... 44
This is a
sampling of the
Conduit, Boxes,
& Raceway that
WESCO offers.
33
33
CONDUIT, BOXES, & RACEWAY
Conduit Bodies & Boxes
Appleton® FM7™ Grayloy™ Iron Unilet® Conduit Bodies
Provide access to conductors for pulling,
splicing, and maintenance.
t Threaded for rigid conduit and IMC
t Feature threaded, tapered hubs
t Smooth hub bushings and cover openings
protect conductor insulation
t Flat back design provides greater cubic content for
easier wire pulling and more room for splicing
t Completely interchangeable with other Form 7 conduit bodies
t Time-saving Clip-on® covers for quick and easy assembly —
order separately
t Triple-coat finish for maximum corrosion protection
t Meet UL® Standard 514
T57
X27
LB67
C27
LR17
LL17
Mfr.’s Model No.
Description
C17
C27
C37
C47
C57
C67
LB17
LB27
LB37
LB47
LB57
LB67
LL17
LL27
LL37
LR17
LR27
LR37
T17
T27
T37
T47
T57
T67
X27
X37
Type C Conduit Bodies; 1/2" Hub Size, 2 Hubs, Straight Hub Placement, Side Access Opening
Type C Conduit Bodies; 3/4" Hub Size, 2 Hubs, Straight Hub Placement, Side Access Opening
Type C Conduit Bodies; 1" Hub Size, 2 Hubs, Straight Hub Placement, Side Access Opening
Type C Conduit Bodies; 1-1/4" Hub Size, 2 Hubs, Straight Hub Placement, Side Access Opening
Type C Conduit Bodies; 1-1/2" Hub Size, 2 Hubs, Straight Hub Placement, Side Access Opening
Type C Conduit Bodies; 2" Hub Size, 2 Hubs, Straight Hub Placement, Side Access Opening
Type C Conduit Bodies; 1/2" Hub Size, 2 Hubs, 90° Hub Placement, Back Access Opening
Type LB Conduit Bodies; 3/4" Hub Size, 2 Hubs, 90° Hub Placement, Back Access Opening
Type LB Conduit Bodies; 1" Hub Size, 2 Hubs, 90° Hub Placement, Back Access Opening
Type LB Conduit Bodies; 1-1/4" Hub Size, 2 Hubs, 90° Hub Placement, Back Access Opening
Type LB Conduit Bodies; 1-1/2" Hub Size, 2 Hubs, 90° Hub Placement, Back Access Opening
Type LB Conduit Bodies; 2" Hub Size, 2 Hubs, 90° Hub Placement, Back Access Opening
Type LB Conduit Bodies; 1/2" Hub Size, 2 Hubs, 90° Hub Placement, Left Side Access Opening
Type LL Conduit Bodies; 3/4" Hub Size, 2 Hubs, 90° Hub Placement, Left Side Access Opening
Type LL Conduit Bodies; 1" Hub Size, 2 Hubs, 90° Hub Placement, Left Side Access Opening
Type LR Conduit Bodies; 1/2" Hub Size, 2 Hubs, 90° Hub Placement, Left Side Access Opening
Type LR Conduit Bodies; 3/4" Hub Size, 2 Hubs, 90° Hub Placement, Left Side Access Opening
Type LR Conduit Bodies; 1" Hub Size, 2 Hubs, 90° Hub Placement, Right Side Access Opening
Type T Conduit Bodies; 1/2" Hub Size, 3 Hubs, Tee Hub Placement, Side Access Opening
Type T Conduit Bodies; 1" Hub Size, 3 Hubs, Tee Hub Placement, Side Access Opening
Type T Conduit Bodies; 1-1/4" Hub Size, 3 Hubs, Tee Hub Placement, Side Access Opening
Type X Conduit Bodies; 3/4" Hub Size, 4 Hubs, Cross Hub Placement, Side Access Opening
Type X Conduit Bodies; 1" Hub Size, 4 Hubs, Cross Hub Placement, Side Access Opening
Stamped Steel Wedge-Lok™ Clip Covers for
Appleton® FM7™ Series Conduit Bodies
t Pan-head screws secure cover clips
and provide superior screwdriver
seating and torque
t No re-tapping of corroded body screw holes is
necessary to replace cover
t Cover screws and clips
are captive to prevent loss
Gaskets for Appleton® FM7™ Series Conduit Bodies
and Wedge-Lok™ Clip Covers
t Provide a worry-free, raintight seal
when used with covers that have a
heavy-duty cover screw washer
t Made of closed-cell neoprene
GASK571
370
Mfr.’s Model No.
Description
Mfr.’s Model No.
Description
170
270
370
470
570
670
1/2" Trade Size
3/4" Trade Size
1" Trade Size
1-1/4" Trade Size
1-1/2" Trade Size
2" Trade Size
GASK571
GASK572
GASK573
GASK574
GASK575
GASK576
1/2" Trade Size
3/4" Trade Size
1" Trade Size
1-1/4" Trade Size
1-1/2" Trade Size
2" Trade Size
34
Conduit Bodies & Boxes
Appleton® Form 35® Malleable Iron Unilet® Conduit Outlet Bodies
Provide access to conductors for pulling, splicing, and maintenance.
t
t
t
t
Threaded for use with rigid conduit and IMC
Malleable iron construction with corrosion-resistant tri-coat finish
Built-in, easy pulling rollers in Type LB eliminate damage when cable is pulled through hubs
Meet UL® Standards 514A and 514B
LB200-M
T75-M
Description
LB50-M
LB75-M
LB100-M
LB125-M
LB150-M
LB200-M
LB250-M
LB300-M
LB400-M
T50-M
T75-M
T100-M
T125-M
T150-M
T200-M
T300-M
T400-M
Type LB Conduit Bodies with Built-In Easy Pulling Rollers; 1/2" Hub Size, 2 Hubs, 90° Hub Placement, Back Access Opening
Type LB Conduit Bodies with Built-In Easy Pulling Rollers; 3/4" Hub Size, 2 Hubs, 90° Hub Placement, Back Access Opening
Type LB Conduit Bodies with Built-In Easy Pulling Rollers; 1" Hub Size, 2 Hubs, 90° Hub Placement, Back Access Opening
Type LB Conduit Bodies with Built-In Easy Pulling Rollers; 1-1/4" Hub Size, 2 Hubs, 90° Hub Placement, Back Access Opening
Covers for Appleton® Form 35® Unilet®
Conduit Outlet Bodies
t Screw-on installation
t Covers include stainless steel
fastening screws
t Stamped steel construction
t Blank covers are domed
Mfr.’s Model No.
Gaskets for Appleton® Form 35® Unilet®
Conduit Outlet Bodies and Covers
t Solid neoprene construction
t Screw-on cover type
t Tear-out inner perforated section enables
conversion from solid to open type gasket
K125&150
Mfr.’s Model No.
Description
K50
K75
K100
K125&150
K200
K250&300
1/2" Trade Size
3/4" Trade Size
1" Trade Size
1-1/4" and 1-1/2" Trade Sizes
2" Trade Size
2-1/2" and 3" Trade Sizes
GK100-N
Mfr.’s Model No.
Description
GK50-N
GK75-N
GK100-N
GK125-150-N
GK200-N
GK250-300-N
GK350-400-N
1/2" Trade Size
3/4" Trade Size
1" Trade Size
1-1/4" and 1-1/2" Trade Sizes
2" Trade Size
Appleton® ER Series Square Outlet Boxes
For use with threaded metal conduit.
t
t
t
t
Explosion-proof and dust-ignition-proof for use in hazardous locations
Ground surface contact between body and cover ensures a flame-tight joint
Constructed of malleable iron
External hub type
ERT75
ERLB75
Mfr.’s Model No.
Description
ERLB75
ERT75
LB Configuration, 2 Hubs, 3/4" Hub Size, 90° Hub Placement, Back Access Opening
T Configuration, 3 Hubs, 3/4" Hub Size, Tee Hub Placement, Side Access Opening
35
Conduit Bodies & Boxes, Sealing Fittings
Appleton® GRSS Series Square Outlet Box
with Multiple Hubs
Appleton® Hazardous Location Sealing Fittings for
Close Turning Radius — EY and EYS Series
For use in vertical or horizontal conduit runs.
t
t
t
t
t Explosion-proof and dust-ignition-proof
for use in hazardous locations
t Internally threaded aluminum body
with externally threaded aluminum
Form 1 cover
t Includes seven hubs
t Furnished with four close-up plugs
GRSS75
t Internal ground screw is standard
t Internal hub type
t Blank covers, externally threaded, four plugs
EYF-75
Mfr.’s Model No.
Description
GRSS75
(6) Sides and (1) Bottom Hub Placements, 3/4" Hub Size,
3-3/8" Opening Diameter
(6) Sides and (1) Bottom Hub Placements, 1" Hub Size,
3-3/8" Opening Diameter
GRSS100
For use with threaded metal conduit
Explosion-proof and dust-ignition-proof for use in hazardous locations
Smooth, rounded integral bushing in each hub protects conductor insulation
Meets UL® Standard 886 (1203)
EYM-75
EYSF75
EYSM75
Appleton® GR Series Hazardous Location
Round Outlet Boxes
t Explosion-proof and dust-ignition-proof
for use in hazardous locations
t Malleable iron bodies have high tensile
strength and ductility
t Impact, shock, and corrosion resistant
t Accurately tapped, tapered hub threads for
tight, rigid joints and ground continuity
t Smooth, rounded integral bushing in
each hub type box protects conductor
insulation
t Furnished with cover and internal
grounding screw
t External hub type
t Blank covers, externally threaded,
no plugs
EYS-21
GRLB75
Mfr.’s Model No.
Description
EYF-75
EY Series Sealing Fittings — Malleable Iron; Vert./Horiz.
Mounting Position, F-F Connection, 3/4" Trade Size,
1.19 Turning Radius
EYM-75
EY Series Sealing Fittings — Malleable Iron; Vert./Horiz.
Mounting Position, M-F Connection, 3/4" Trade Size,
1.19 Turning Radius
EYSF75
EYS Series Sealing Fittings — Malleable Iron; Vert.
2.25 Turning Radius
EYSM75
EYS Series Sealing Fittings — Malleable Iron; Vert.
2.25 Turning Radius
EYS-4
EYS Series Sealing Fittings — Malleable Iron; Vert./Horiz.
Mounting Position, F-F Connection, 1-1/4" Trade Size,
1.75 Turning Radius
EYS-5
Mounting Position, F-F Connection, 1-1/2" Trade Size,
2.06 Turning Radius
EYS-6
Mounting Position, F-F Connection, 2" Trade Size,
2.31 Turning Radius
EYS-21
EYS Series Sealing Fittings — Grayloy® Iron; Vert./Horiz.
1.19 Turning Radius
EYS216
1.19 Turning Radius
EYS-31
1.38 Turning Radius
EYS-10
3.69 Turning Radius
GRT100
Mfr.’s Model No.
Description
GRLB75
GRLB Series Round Outlet Boxes — Malleable Iron; (1) Side, (1)
Bottom Hub Placements, 3/4" Hub Size, 3-3/8" Opening Diameter
GRLB Series Round Outlet Boxes — Malleable Iron; (1) Side, (1)
Bottom Hub Placements, 1" Hub Size, 3-3/8" Opening Diameter
GRT Series Round Outlet Boxes — Malleable Iron; (3) Sides Tee
Hub Placements, 3/4" Hub Size, 3-3/8" Opening Diameter
GRT Series Round Outlet Boxes — Malleable Iron; (3) Sides Tee
Hub Placements, 1" Hub Size, 3-3/8" Opening Diameter
GRLB100
GRT75
GRT100
36
EYS216
Device Boxes, Junction Boxes
Appleton® Single-Gang Cast Device Boxes —
FS and FD Series
Unilets for use with threaded
rigid metal conduit and IMC.
®
FS-1-50
Type FS Device Boxes — Malleable Iron; End Hub
Placement, 1/2" Hub Size, 2" Depth, No Mounting Lugs
Placement, 1/2" Hub Size, 2" Depth, 2 Mounting Lugs
Type FD Device Boxes — Malleable Iron; End Hub
Placement, 3/4" Hub Size, 2.69" Depth, No Mounting Lugs
Type FD Device Boxes — Malleable Iron; End Hub
Placement, 3/4" Hub Size, 2.69" Depth, 2 Mounting Lugs
Type FSC Device Boxes — Malleable Iron; (1) Each End Hub
Placement, 3/4" Hub Size, 2" Depth, 2 Mounting Lugs
Type FDC Device Boxes — Malleable Iron; (1) Each End Hub
Placement, 3/4" Hub Size, 2.69" Depth, No Mounting Lugs
Placement, 3/4" Hub Size, 2.69" Depth, 2 Mounting Lugs
Placement, 1" Hub Size, 2.69" Depth, No Mounting Lugs
FD-1-75L
FSC-1-50
FSC-1-75
FSC-1-75L
FDC-1-75
FDC-1-75L
FDC-1-100
Single-Gang Covers for Appleton®
FS and FD Series Cast Device Boxes
FSK-1DR
FSK-1VTS
FSK-1VS
Mfr.’s Model No.
Description
FS-GKR-1N
Neoprene
t ATEX / IEC Ex / II 2 GD
t Designed for use in Zone 1 or 2 areas
where flammable gases or vapours
are present, either continuously or
intermittently
t Ideal for wet or corrosive atmospheres
t Designed for use in Zone 21 or 22 areas
where flammable dusts are present,
either continuously or intermittently
t Ingress Protection: IP66
t Impact Resistance: IK10
t 4 x M20 entries with knock-out caps. Supplied with
four integrated cable glands for unarmored
cable diameter 6.5-14.5mm
t Operating temperature of -40° C to +55° C
Mfr.’s Model No.
Description
JBEP080806NE04T
Type: BJe1; Rating Amps: 28 A/2.5mm² 38 A/4mm²;
Weight: 1.08 kg; Volume: 3.6 dm³
Appleton® JBDR Series Pre-Drilled Round
Junction Boxes—Flameproof
t ATEX / IEC / II 2 GD
t Designed for use in Zone 1 or 2 areas where
flammable gases or vapors are present,
either continuously or intermittently
t Ideal for wet or corrosive atmospheres
t Designed for use in Zone 21 or 22 areas where flammable
dusts are present, either continuously or intermittently
t Ingress Protection: IP66
t Impact Resistance: IK10
t Operating temperature of -40° C to 55° C
t Terminal capacity: 4 x 4 mm² or 2 x 6 mm²
t Internal Earth: Ground plate with 4 x M4 screws for
connection to 4mm diameter lugs
t External Earth M5 screw
Mfr.’s Model No.
Description
JBDR25G
Cable Entries: 2 x M25; Entry Configuration: Feed Through;
Supplied With: 2 Cable Glands; Weight: 0.80 kg; Volume: 2 dm³
Cable Entries: 3 x M25; Entry Configuration: “T”; Supplied With:
3 Cable Glands; Weight: 0.80 kg; Volume: 2 dm³
Cable Entries: 4 x M25; Entry Configuration: Cross; Supplied
With: 4 Cable Glands; Weight: 0.80 kg; Volume: 2 dm³
FSK-1B-C
Mfr.’s Model No.
Description
FSK-1DR
FSK-1VTS
FSK-1VTS-A
FSK-1VS
FSK-1VS-A
FSK-1B-C
FSK-1B-CA
Duplex Receptacle Cover Type, Sheet Steel Material
Toggle Switch and Plunger Cover Types, Malleable Iron Material
Toggle Switch and Plunger Cover Types, Cast Aluminum Material
Toggle Switch and Lever Cover Types, Malleable Iron Material
Toggle Switch and Lever Cover Types, Cast Aluminum Material
Blank Cover Type, Malleable Iron Material
Blank Cover Types, Cast Aluminum Material
JBDR25G
JBDR35G
JBDR45G
37
FDC-1-75L
Description
FD-1-75
t Designed to mesh with ridge top
feature of cast device boxes Types
FS, FD, FSC, FDC, FSCT
Appleton® JBEP Series Polycarbonate Junction Boxes
Complete with Terminals—Increased Safety
Mfr.’s Model No.
FS-1-75
Gasket for Appleton® Cast Device Boxes and Covers
FS-GKR-1N
t Type FS — shallow; Type FD — deep
t Corrosion-resistant design is ideal for
FS-1-50
both indoor and outdoor applications
t Weatherproof, raintight, and dust-tight
when used with cast gasketed covers
t Both malleable iron and aluminum boxes
have ridge top construction for positive
cover/gasket/box fit
t Accurately tapped, tapered threads for
FSC-1-75
tight, rigid joints and ground continuity
t Meet UL® Standards 514A
FS-1-50L
Conduit Bodies & Boxes, Sealing Fittings, Compound
Cooper Crouse-Hinds® Condulet®
Form 7, Form 8 and Mark 9 Conduit Outlet Bodies
Cooper Crouse-Hinds® EYS and EYD Series
Hazardous Location Sealing Fittings
Provide access to conductors for pulling, splicing, and tapping
Used to restrict the passage of gases, vapors, or flames
from one portion of the electrical installation to another
t Form 7 Condulet® outlet bodies approach conduit
in size for neat, compact installations
t Form 8 and Mark 9 bodies provide more
room for heavier conductors
t Many shapes and sizes are available
for rigid threaded conduit
t Conduit hubs have tapered threads
and feature integral bushings for
protection of wire insulation
t Form 7 has exclusive Snaptight™ and
wedgenut cover attachment to provide clear,
unobstructed cover opening
LB27
Cooper Crouse-Hinds® EAB and EAJ Series
Explosionproof Outlet Boxes
Installed in conduit systems within hazardous areas to act as pull and
splice boxes, interconnect lengths of conduit, and change conduit direction
t Taper threaded hubs provide continuity
t Smooth integral hub bushing protects conductor
insulation when pulling
t EAB Series offers five different
hub configurations; EAJ Series offers
six different hub configurations
t EAJ Series designed with external cover
threads on body, protecting conductors
from damage during pulling
t Electrogalvanized Feraloy® iron construction
with aluminum acrylic paint finish
t Cl. I, Div. 1 & 2, Groups A, B, C, D;
Cl. II, Div. 1 & 2, Groups E, F, G
t EAB Series available with
ATEX Certification
t Threaded for use with rigid conduit and IMC
t Minimum turning radius
t Large openings with threaded closures provide easy
access to conduit hubs for making dams
t Taper-tapped hubs ensure positive ground continuity
t Integral bushings in conduit hubs protect conductor
insulation from damage
t EYS Series available for either vertical and horizontal
mounting or vertical-only mounting
t EYD Fittings feature a drain to provide continuous,
automatic draining of condensate
t Electrogalvanized Feraloy® iron construction with
aluminum acrylic paint finish
t Meet UL886, CSA C22.2, and NEC/CEC
EYS4
Cooper Crouse-Hinds®
Chico® SpeedSeal™ Compound
Install an explosionproof seal in less than five minutes
t Expands after injection to tightly fill the entire fitting,
automatically separating the conductors
t No time-consuming and tedious task of packing fiber
to separate the individual conductors
t Quickly hardens to a dense, strong mass
t UL and cUL Listed for use with Cooper Crouse-Hinds
EYS sealing fittings up to 2"
SS2
Cooper Crouse-Hinds® GUB
Series Explosionproof Conduit
Outlet Boxes
Used in threaded rigid conduit
systems to function as a splice
box, pull box, or equipment and
device enclosure
t Threaded construction throughout
permits use in hazardous areas
t Bodies have thick walls so they can
be factory or field drilled and tapped
to meet NEC/CEC requirements for
Class I hazardous areas
t Covers are provided with a neoprene
“O” ring gasket for a watertight seal
t Internal grounding lug provides a
means to ground enclosed equipment
t Boxes are machined for field installed
mounting plates
t Cl. I, Div. 1 & 2, Groups C, D;
t ATEX certified when ordered
with SA ATEX suffix
38
1. Pump
2. Inject
3. Sealed
Contact your local WESCO Branch for ordering information.
WESCO
SPS
sourcing and procurement services
we get the right material to the
right place at the right time!
Procurement of Commodities
t Abrasives
t Air Moving Equipment (Fan/Blowers)
t Audio/Video Equipment
t Cement/Concrete Products
t Chain and Chain Fittings
t Chemicals
t Communications Equipment
t Construction Materials and Supplies
t Cutting Tools
t Electrical Supplies
t Fabrication
t Fasteners
t Filtration/Strainers/Traps
t Galley Equipment
t Heating/HVAC Equipment
t Hose/Hose Fittings
t Household Appliances/Furnishings
t Industrial Hardware
t Instrument Tube/Tube Fittings
t Instrumentation
t Janitorial Supplies
t Lifting Equipment
t Lubricants/Lubrication Equipment
t Marine Supplies
t Material Handling Equipment
t Office Furniture/Supplies
t Paint/Industrial Coatings
t Pipe/Valves/Fittings
t Plumbing Supplies
t Power Transmission
t Process Control
t Recreational Equipment
t Rope, Fiber (Manila/Nylon/Poly)
t Safety Materials (PPE)
t Sealants/Adhesives/Tapes
t Storage Racks and Cabinets
t Structural Steel (Plates/Shapes)
t Tires (Off Road/Highway)
t Tools (Hand, Electric, and Air)
t Waste Disposal Containers/Bags
t Wire Rope and Fittings
Please contact the nearest WESCO SPS
location to place an order
United States
7049 Brookhollow West Drive
Houston, Texas 77040
Tel: 1.281.848.1429
United Kingdom
26-28 Exchange Street
Aberdeen, Scotland AB11 6PH
Tel: (44) 1224.577900
Singapore
31 Kaki Bukit Road3, #06-18
Techlink, Singapore 417818
Tel: (65) 6344.1533
Features
t Supply chain integrity
t Extensive global supplier database
t Information technology and
data management
t Integrated indirect materials and
service supply chain programs
t Multi-currency capability
t E-commerce capabilities
For more information on WESCO’s
Sourcing and Procurement Services,
call or visit your local Branch,
or log on to www.wesco.com
Full Procurement Services
t Material Sourcing
t Vendor Quotations
t Order Placement
t Expediting
t Material Inspection
(Part No./Count OS & D)
t Coordinating Third Party
Inspection
t Problem Resolution
t Vendor Payment
t Full Logistical Support
t Receiving
39
WESCO & THOMAS & BETTS
The Effects of Corrosion on the Electrical System
Corrosion in electrical systems typically
represents only a fraction of the direct
costs for many industries, but it yields
a disproportionately large share of the
indirect costs. Corrosion in electrical
contacts creates high resistance and
unreliable connections, which lead to
poor power quality.
In production and manufacturing, where
downtime can be very costly, failure of a
relatively inexpensive electrical component
that leads to loss of power and control to
production equipment can quickly add up
to thousands of dollars in lost productivity.
Electrical systems, therefore, are a prime
area in which an upfront investment in
corrosion protection returns significant
cost savings, as well as increased safety
and other benefits over the long term.
This means selecting electrical conduit,
fittings, support systems, and accessories
in corrosion-resistant materials appropriate
for the environment in which they will be
installed.
QOCAL-BLUE® Double-Coated UL® Listed
Type 4X Form 8 Conduit Bodies
t UL® Listed Type 4X and NEMA
4X rating for excellent protection
against washdown, moisture,
rain, ice, or snow
t Cast iron bodies and covers
coated inside and out with 2 mils
blue urethane, then exterior
coated with minimum 40 mils
PVC in gray (standard), blue,
white, or custom colors
t Ship complete with cover with
integral O-ring seal and stainless
steel encapsulated screws
t Available in all popular shapes
in hub sizes from 1/2" to 2"
QOCAL-BLUE® Double-Coated
STAR TECK EXTREME® Fittings
t Aluminum fittings for jacketed metal-clad and teck cables
t Nominal 2 mils blue urethane coating
on both interior and exterior
t Nominal 40 mils PVC
coating bonded to exterior
t For use in ordinary
and hazardous locations
40
QPVC-Coated Liquidtight
Conduit Connectors
QOCAL-BLUE® Conduit
t Genuine T&B liquidtight conduit
fittings — straight, 45°, and 90°
t Hot-dipped galvanized threads
(steel conduit only)
t Nominal 40 mils PVC coating
bonded to exterior
t Nominal 2 mils blue urethane
coating on interior
t Pressure-sealing sleeves
protect connections
t Minimum 40 mils PVC coating
on exterior
t Hot-dipped galvanized steel or aluminum conduit
®
QOCAL-BLUE® Double-Coated
GUA Series Conduit Boxes
t Ductile iron bodies with O-ring gasketed
cast aluminum covers
t Fabricated from Ocal® PVC-coated conduit
t Factory bent to save time and wasted materials
t Standard radius 30°, 45°, 60°, and 90°, and large radius 90°
available for immediate shipment
t Special radius and other angles available upon request
t Nominal 2 mils blue urethane
coating on both interior
and exterior
t Nominal 40 mils PVC coating
bonded to exterior
t For use in hazardous locations
QThomas & Betts Kopex-Ex™ Metallic and
Non-Metallic Conduit Fittings
Kopex-Ex™ metallic and non-metallic conduit fittings and accessories
provide safe, reliable connections in hazardous areas. Our rigorous quality
standards and a dedicated design and development program ensure that
Kopex-Ex products are manufactured with the highest quality and meet
many standards for their use in hazardous areas.
QPVC-Coated Strut, Straps, and Clamps
t Steel strut with nominal 15 mils PVC coating
t Full line of PVC-coated beam clamps, pipe straps,
conduit hangers, and threaded rod also available
Contact your local WESCO Representative for ordering information
41
WESCO & THOMAS & BETTS
QOCAL-BLUE® Standard- and Large-Radius Elbows
Channel, Channel Nuts
Uniqueness in Design
The 1-1/2" dimension in the channel, hole spacing and fittings means all parts fit together, no matter where they’re used,
or at what angle. This modular dimension provides maximum flexibility in field applications, and results in saving inventory
and labor dollars. The Kindorf channel exclusive Galv-Krom finish provides superior corrosion protection for all threaded
components, channel and fittings. Through a two-part process, the coating is applied on all finished parts after fabrication –
there is no exposed surface where corrosion can start.
Thomas & Betts Kindorf® Metal Framing Channels, Hardware, and Fittings
t Continuous open slot with turned-in edges serves as a retaining point
for the nuts and bolts assembly of fittings to the channel
t Channel shape provides infinite adjustability of clamping nut by
simply gliding it along the channel to the desired position
t Channel nuts are specially designed with biting edges so that, when tightened,
they grip the channel sides and increase the rigidity of the channel itself
t No pre-measuring, punching, drilling, or welding is required,
saving installation time and reducing labor costs
t Available in steel, stainless, or aluminum with a variety of finishes
t Comes in standard 10' or 20' lengths
t New Trivalent Galv-Krom® finish is OSHA Safe and RoHS Compliant
B-905-10
Mfr.’s Model No.
Description
B-903-10
B-905M-10
B-905-10
B-903 Channel — for Connection Using Continuous Slot or 9/16" Holes on 1-1/2" Centers; Single Configuration; 12-Gauge Steel, Galv-Krom
B-905 Series Channel — for Connection Using Continuous Slot or 9/16" Holes on 1-1/2" Centers; Single Configuration; 14-Gauge Steel, Galv-Krom
B-905 Series Channel — for Connection Using Continuous Slot or 9/16" Holes on 1-1/2" Centers; Single Configuration; 12-Gauge Steel, Galv-Krom
Additional sizes available. Please contact your local WESCO Branch for ordering information.
Thomas & Betts Kindorf® Trapnut® Strut Fastener
Sized to provide custom fit for either 1-5/8" or 1-1/2" strut systems.
t No need to thread fastener from
either end of the rod
t Perfect for retro-fit applications
where rod ends are not accessible
t Precision threads trap the threaded rod
for a sturdy hold that can be adjusted up
or down for fine-tune positioning
t Functions as a hex nut, square washer,
and flat washer combined
t Can be removed and reused
t Locking pin holds it in the desired position
t Sturdy steel construction is load bearing
Insert the bottom plate on the rod
and close the top plate.
H 122 3/8
Mfr.’s Model No.
Description
H 122 1/4
H 122 3/8
H 122 1/2
Galv-Krom®; 150 lbs. Design Load, 1/4" Size
Galv-Krom®; 590 lbs. Design Load, 3/8" Size
Galv-Krom®; 1,080 lbs. Design Load, 1/2" Size
42
Press the pin with pliers.
Tighten to the desired position with pliers.
Strut Systems
Cooper Bolted Framing (Strut) Systems
As one of the largest manufactures of Bolted Framing (Strut) Support Systems, Cooper
B-Line provides an economical solution for virtually any electrical, mechanical and
industrial support application. With a complete line of channel, fittings and accessories,
we offer one of the broadest offerings of Bolted Framing and Strut Support Systems in
the industry. Channel and fittings can be taken apart for reuse as quickly as they were
assembled, producing substantial savings in time and labor.
Mfr.’s Model No.
UPC#
Description
B22-120 HDG
B22-120 SS4
B22-120 SS6
B22A-120 HDG
B22A-120 SS4
B22A-120 SS6
B22S-120 GRN
B22SH-120 GRN
B22SH-120 HDG
B22SH-120 SS4
B22SH-120 SS6
B22SHA-120 HDG
78101121109
78101121122
78101104581
78101121712
78101121714
78101184132
78101121520
78101121320
78101121308
78101121312
78101121321
78101184328
B22SHA-120 SS6
78205121728
B24SH-120 GRN
B54SH-120 GRN
B54SH-120 SS4
78101122220
78101125720
78101125707
Hot-Dipped Galvanized; 10 ft. Standard Length; ASTM A123 Specification; 12 Gauge Material Thickness
Stainless Steel Type 304; 10 ft. Standard Length; ASTM A240 Specification; 12 Gauge Material Thickness
Dura-Green; 10 ft. Standard Length; 12 Gauge Material Thickness
Hot-Dipped Galvanized, Back to Back SH Type Channel; 10 ft. Standard Length; ASTM A123 Specification;
12 Gauge Material Thickness
Stainless Steel Type 316, Back to Back SH Type Channel; 10 ft. Standard Length; ASTM A240 Specification;
12 Gauge Material Thickness
Cooper B-Line strut systems are well suited for applications found in the Oil and Gas industry:
t Multiple finishes and materials including 304 stainless steel, 316 stainless steel,
hot dip galvanized and Dura Green™ to help prevent corrosion
t Multiple profile and hole patterns available to accommodate various connection and
hardware types
t Channel can be ordered to custom lengths eliminating the need for cutting at the installation site
t Industry leading manufacturing processes produce more consistent profiles, less built-in stress,
and less flaring after cutting
Electrical/Mechanical Supports and Cable Management
As the leading supplier of electrical and mechanical cable support systems, pipe supports, and walkways, our designs are suited to
match varying environments and conditions. We have one of the broadest offerings of cable trays with the longest spans available
in the market today. Our product solutions are suited for electrical and mechanical subsystem applications in both indoor or outdoor
environments for industrial facilities, office buildings, personnel quarters, and more. We offer cost-effective alternatives that provide
field flexibility and labor savings.
Strut Support Systems
Cable Channel and Accessories
Safety Gratings
s Broadest strut system offering in the industry
s Hot-dip galvanized or stainless steel available
in ventilated and non-ventilated options
FLEXTRAY™ Wire Basket
s Slip resistant walkways for demanding
environments where mud, ice, oil, and
other substances can create hazardous
working conditions
s Field fabricated fittings help reduce
installation time and increase flexibility
s Available in a wide variety of traction
patterns and material types
s Unique splicing and support options that
help reduce the total installed cost over
alternative methods
Seismic Bracing
Pipe Hangers
s UL® Listed and FM Approved
s Patented technology eases pipe installation
Limberoller Conveyor Belt Idlers
s All products meet or exceed industry
standards set for their design and application
s Troughing idlers and brackets
s Solutions for virtually any electrical,
mechanical, or industrial support application
s Materials and finishes for every environment
including stainless steel, galvanized steel,
and aluminum
Cable Ladder and Accessories
s Corrosion-resistant, hot-dipped galvanized,
stainless steel, and FA Series Fiberglass
(electrically conductive GRP)
s Trefoil or single cable cleats for life
and facility protection
s TOLCO™ seismic bracing products
s Return idlers and brackets
43
Cable Ladders
Cooper B-Line Metric Cable Ladder - IEC/NEMA
Cooper B-Line is a global provider of innovative, labor-saving cable management systems, support systems, and enclosure solutions for industrial
applications such as mining. Cooper B-Line is a leader in cable support systems, with a full range of solutions designed to provide the lowest lifetime cost
of ownership. Cooper B-Line Metric Cable Ladder is constructed of corrosive resistant rolled steel components, and features I-Beam side rails which adds
strength with less material to provide a superior strength-to-weight ratio. The slotted side rails of the Metric Cable Ladder help reduce labor by eliminating
the need to drill new splice holes after cutting lengths. It also features slotted rungs that are convenient for attaching cable ties, cable cleats, and many
other Cooper B-Line accessories.
t
t
t
t
Tested to IEC and NEMA standards
Supports 200 lbs. of concentrated load
I-Beam side rails are 149% stronger than C-shape rails
Slotted side rails and rungs eliminate the need to drill holes for accessories
Mfr.’s Model No.
Description
150G300CA20LL-150-6000
150G300CA20LL-300-6000
150G300CA20LL-600-6000
150G300CA20LL-900-6000
150X300CA20LL-150-6000
150X300CA20LL-300-6000
150X300CA20LL-600-6000
150X300CA20LL-900-6000
125G300CA15LL-600-6000
125G300CA15LL-900-6000
125X300CA15LL-600-6000
125X300CA15LL-900-6000
Straight Cable Ladder, Hot Dipped Galv; 150mm Height, 300mm Rung Spacing, 2.0mm Thick, 150mm Width, 6m Length
Straight Cable Ladder, Stainless Steel; 150mm Height, 300mm Rung Spacing, 2.0mm Thick, 150mm Width, 6m Length
44
Enclosures, Fittings, & Grounding
In This Section
WESCO & Panduit ...................46–47
Enclosures & Junction Boxes ......... 48
Fittings .....................................49–57
Lugs ............................................. 58
Clamps ......................................... 58
Grounding & Discharge.............59–60
This is a
sampling of the
& Grounding
products that
WESCO offers.
45
45
Delivering integrated services and complete product systems
WESCO & PANDUIT
Panduit Solutions
New Site Construction
Demanding environmental and
operational conditions expose
equipment to harsh chemical and
extreme temperature conditions
pushing all systems and components
to the limit. Efficiency and productivity
requirements are higher than ever
as the global demand on natural
resources continues to increase.
Site and operator safety are also
extremely important in this harsh
and often hectic environment.
Panduit solutions address tough
performance and environmental
requirements associated with mining
and other harsh applications.
1 Safety Solutions
O
Enable worker and equipment
protection, minimize opportunity
for human error, and aid
in standards compliance
2 Direct Burial Grounding
O
Offer the speed and safety of a
compression connection plus
toughest corrosion resistance
46
Proper electrical grounding and power infrastructure are critical in new mining site
construction along with clearly identified cabling and piping systems for a safe and efficient
mining operation. Panduit provides all necessary components to meet these needs as well as
solutions for routing and bundling cables with weather, chemical, and temperature resistant
cable ties and tool systems.
Networking & Automation Integration
The mining process includes the use of several different machines from numerous
manufacturers for crushing, sizing, drilling, conveying, and loading/off-loading in both surface
and underground applications. Panduit solutions help integrate networking, control, and safety
systems for the entire mining operation.
Maintenance, Repair, & Operations (MRO)
Onsite maintenance, repair, and operational tasks can range from scheduled preventative
maintenance to unexpected crisis management. Panduit solutions deliver quality and
reliability, as well as exceed industry standards to help meet ever-changing compliance
requirements for installations that stand the test of time.
Safety & Lockout/Tagout Compliance
Regulations and industry standards such as OSHA, NEC, UL, CSA, NFPA, IEEE, are
continuously refining and improving safety requirements to ensure personnel and site safety.
Panduit safety solutions include training and compliance instructional tools in addition to
products required to implement arc flash and OSHA lockout/tagout safety programs.
3 Stainless Steel Solutions
O
Provide a durable method of
bundling, identifying, and
fastening where severe and harsh
conditions jeopardize reliability,
productivity, and safety
4 Identification Solutions
O
Enable efficient site management
while improving communication
and safety
1
O
7 O
10
O
6
O
1
O
2
O
5 Cable Ties & Cable
O
Management Accessories
High-performance wire
management solutions from
standard industrial to harsh
environmental applications
6 Power Connectors
O
Deliver superior electrical
performance in the toughest
environments — meet
or exceed ABS and NEBS
Level 3 regulatory standards
3
1O
O
8
7O
4 O
O
6
O
5
O
2
O
1
O
2
O
6O
5O
4 O
O
8
9 Fiber Optic Cabling
O
Solutions
Armored fiber optic cables provide
superior crush resistance for
extended durability in direct
burial applications
10 Copper Cabling Solution
O
Complete connectivity from
production site to the control
room and corporate office
7 Industrial Networking
O
Solutions
Provide end-to-end connectivity
for harsh industrial environments
with a family of reliable,
high-performance, IP (Ingress
Protection) rated products
8 Wiring Duct
O
Optimize panel space utilization
and protect sensitive equipment
from noise using Panduit
PanelMax® line of wiring duct:
DIN Rail Duct, Corner Duct,
and Shielded Duct
47
WESCO & PANDUIT
6
O
7O
8 O
9
O
ENCLOSURES, FITTINGS, & GROUNDING
Cooper Crouse-Hinds® Ex-CELL Enclosures
Manufactured to meet the most demanding industrial and
hazardous area environmental applications
t Available in a
comprehensive range of
sizes, each with various
configurations for a
multitude of applications
t Globally certified enclosure
with over 100 sizes in
stainless steel and painted
steel
t Type 3S and 4X; IP66
t Integral drainage channel
prevents liquids and solid
contaminants from running
into enclosure, minimizing
gasket contamination
t 3mm-thick stainless steel
slotted lugs provide secure
mounting
t One-piece sealing gasket
provides IP66 ratings and excellent re-sealing protection
t Internal/external brass stud assembly ensures rapid
earth/ground connection
t cULus Listed, ATEX Certified, IECEx Certified,
GOST-R, GOST-K and KOSHA Certified
Enclosures and Junction Boxes
Cooper Crouse-Hinds® EJB Series
Junction Box with Hinged Cover
For use in threaded rigid conduit systems in hazardous areas
XLHZTMP2315
t Provides an enclosure for splices
and branch conduit taps
t Used indoors or outdoors in
damp, wet, dusty, corrosive,
hazardous locations
t Furnished with captive, triple
lead, quick release hex head
stainless steel cover bolts
t Large cover opening enables
maximum accessibility to
interior of enclosure
t Special neoprene cover gasket
provides a watertight seal
t Cl. I, Div. 1 & 2, Groups B, C, D;
Class II, Div. 1, Groups E, F, G
t ATEX certified when ordered
with ATEX suffix
Cooper Crouse-Hinds® ECP Series
Explosionproof Control Panels
An enclosure designed specifically for OEMs
Cooper Crouse-Hinds® GHG64 Series
Flameproof Enclosures
For use in threaded rigid conduit systems in hazardous areas to function
as a splice box, pull box, or equipment and device enclosure
t 11 sizes (modular design) to
suit your requirements with very
effective power dissipation
t Ground joint (bolted) construction
throughout permits use in
hazardous areas
t Bodies have thick walls so they can
be factory drilled and tapped to meet
IEC requirements for Zone 1, 2, 21,
and 22 hazardous areas
t Hinged cover with up to 110°
cover opening – designed for easy
maintenance
t ATEX Certified, GOST-R and
GOST-K Certified
48
t Used in hazardous locations to
house control stations, circuit
breakers, motor starters, relays,
meters, terminals, etc.
t 40 sizes available from
4" x 6" x 4" to 24" x 36" x 10"
(12 new sizes added)
t Made to order in
Houston, Texas including
drilling, tapping and
installing operators
t UL, cUL, ATEX, IECEx
(pending) approvals for
global hazardous locations
EJB121206
Fittings
Cooper Crouse-Hinds® Flexible Cord Connectors
t Liquid-tight
t Include gland nut and tapered neoprene bushing
t Type CGB-SG also includes
sealing gasket and locknut
t Use with portable cords and
Types MV (unarmoured),
PLTC, SE (round), TC,
and UF cables
t UL Listed and
CGE193
CSA Certified
INDUSTRIAL FITTINGS AND
CABLE GLANDS
Our time-tested and innovative conduit fittings, cord connectors, and
cable glands move power where you need it simply and safely in any
electrical installation. We deliver solutions for both non-hazardous and
hazardous areas where safety is of the utmost importance.
Conduit Outlet Bodies and Boxes
s Multiple configuration sizes and materials
Cable Glands
Cooper Crouse-Hinds® International Cable Glands
Complete termination solutions for
global cable applications
CGB193
s Built to NEC®/IEC Standards
s Armored or non-armored
s Wide range of cable types and materials
Sealing Fittings and Compounds
s Standard sealing fittings
s Sealing fittings with drains
s Retrofit and expanded fill
Conduit Hubs
s Comprehensive range of hub sizes,
materials, and ratings
Ultra High Pressure and Secondary Process Seals
s Prevents gases, liquids, and vapors from moving through
conduit, cables, and conductors
Unions and Elbows
ADE 1F
ADE 4F
ADE 6F
ADE 6FC
t Increased safety, flameproof, and explosionproof
terminations for harsh and hazardous environments
t Global certifications, including cULus, ATEX, IECEx, CEPEL, GOST-R, and NEPSI
t Ease of cable termination providing labor and time management productivity
t Standard in nickel-plated brass with options for stainless steel, aluminum, and bronze
t Full line of accessories, including adapters, unions, and reducers
Reducers and Plugs
Couplings
Cooper Crouse-Hinds® Corrugated
Armoured Cable Glands
For use with metal-clad, non-armoured, and Teck cable
in industrial and explosionproof areas
t Standard material is aluminum
t Stainless steel copper-plated
spring provides grounding
continuity of cable armour
(MC cable only)
t Watertight seal on outer sheath
of cable
t UL Listed, CSA Certified
49
Fittings
Appleton® Straight and 90° Male Liquidtight
Strain-Relief Connectors
t Provide a liquidtight strain-relief
termination for flexible-type neoprene,
hypalon, and PVC-jacketed power or
control cord or cable
t Santoprene® sealing grommet firmly
but safely grips cable jacket, providing
strain relief and protecting internal
wiring connections against external
tension on cable or cord
t Use in wet or dry locations to seal
electrical connections against dust,
dirt, oil, and water
t Aluminum construction
t UL® Listed and CSA Certified
CG90-3750
CG-1250
Mfr.’s Model No.
Description
Aluminum Straight Strain-Relief Cord and Cable Connector
CG-1250
0.13–0.19" O.D. Min.-Max., 0.50" Hub Size
CG-1850
CG-3150
CG-3750
CG-5050
CG-6250
CG-2575
CG-3775
CG-5075
CG-6275
CG-7575
CG-75100
CG-100125
CG-200250
Aluminum 90° Strain-Relief Cord and Cable Connector,
CG90-3750
1/2" Hub; 0.38–0.50" O.D. Min.-Max., 0.50" Hub Size
Used for joining conduit or connecting conduit to enclosures.
Mfr.’s Model No.
UNF100NR
UNY100NR
Description
Type UNF Female to Female Union — Steel
UNF50NR
1.47" Overall Length, 1.47" O.D. Max., 1/2" Trade Size
UNF75NR
UNF100NR
1.72" Overall Length, 2.00" O.D. Max., 1" Trade Size
Type UNY Male to Female Union — Steel
UNY50NR
UNY75NR
UNY100NR
2.62" Overall Length, 2.00" O.D. Max., 1" Trade Size
50
t Threaded for use with rigid conduit and IMC
t Suitable for use in hazardous location
t Meets UL® Standard 886 (1203)
Mfr.’s Model No.
RB200-150
Description
Aluminum Construction
RB75-50A
0.75" (large) and 0.50" (small) Trade Sizes
Steel Construction
RB75-50
RB100-50
RB100-75
RB125-75
RB125-100
RB150-75
RB150-100
RB150-125
RB200-100
RB200-125
RB200-150
Malleable Iron Construction
RB250-200
RB300-200
RB400-300
Appleton® PLG Series Close-Up Plugs
t
t
t
t
Unilets® for use with threaded metal conduit
Feature recessed head for flush application requirements
Available in steel or malleable iron
Meets UL® Standard 886 (1203)
Mfr.’s Model No.
Description
PLG-75R
PLG-100R
PLG-125
PLG-150
PLG-200
0.75" Trade Size, Steel Material
1.00" Trade Size, Steel Material
1.25" Trade Size, Malleable Iron Material
PLG-100R
Appleton® Flexible Couplings for Hazardous Locations
— Types EXGJH and EXLK
Appleton® Hazardous Location Unions —
Types UNF and UNY
t For use with threaded metal conduit
t Explosion-proof and dust-ignitionproof for use in hazardous locations
t Smooth, rounded integral bushing
protects conductor insulation
t Available in steel with zinc-plate
finish, malleable iron with
triple-coat finish, or aluminum
with natural finish
t Meets UL® Standard 886
Appleton® Explosion-Proof
Reducing Bushings
t Used in hazardous locations to isolate
conduit systems from vibration
and/or movement or to
make difficult bends
t Explosion-proof,
dust-ignition-proof, and
watertight for use in hazardous
EXLK-136
or wet locations
t Electrical conductivity equal to
that of rigid conduit of similar length
t Interior insulating liner protects conductors from abrasion under vibrating conditions
t Fittings are constructed of brass; flexible material is bronze
t Type EXGJH - Both end fittings are female, each furnished with a
removable make nipple
t Type EXLK - Female end fittings with union at one end and a female end fitting
with a removable male nipple at the other end
Mfr.’s Model No.
Description
EXGJH-212
EXLK-118
EXLK-136
EXLK-218
EXLK-224
EXLK-336
0.75" Trade Size, 12.00" Flexible Length
Fittings
Appleton® Polyamide Cable Glands —
Ex e Certified
Appleton® Polyamide Cable Glands —
Weatherproof IP68
For non-armored cables certified for enclosures with
the following protection modes: Ex e increased safety,
Ex nR restricted breathing, and D dust environment.
For non-armored cables for intrinsic safety Ex i applications
in hazardous areas (gas and dust).
t
t
t
t
t Zone 1 & 2, and 21 and 22
t Ingress protection—IP68
t Ambient temperature —
-20˚ C to 55˚ C
t Blue polyamide body
t Includes two polyamide
clamping rings
t Weatherproof
elastomeric gasket
t Includes neoprene
sealing gasket
095801
Mfr.’s Model No.
095606
Mfr.’s Model No.
Thread
Cable Capacity Max.
Cable Capacity Min.
M16
M20
M25
M32
8.5 mm
14.5 mm
18.5 mm
25.0 mm
3.0 mm
6.5 mm
8.0 mm
10.00
095756
095605
095606
095757
t Weatherproof
elastomeric gasket
t Includes neoprene
sealing gasket
095800
095801
095802
095803
Thread
Cable Capacity Max.
Cable Capacity Min.
M16
M20
M25
M32
8.0 mm
12.0 mm
14.0 mm
25.0 mm
2.5 mm
5.0 mm
7.0 mm
14.0 mm
Appleton® E1FX/E1FW Series Nickel-Plated Brass Cable Glands
Series E1FX: For Armored cables (braid, tape, tape with lead sheath).
Series E1FW: For Armored Cables with Elastomer Seal.
t Zone 1 & 2, and 21 and 22
t Certified for enclosures with the following protection modes: Ex d flameproof IIB
or IIC, EX e increased safety, Ex nR restricted breathing, D dust environment
t Cable gland allows mechanical cable retention and earth continuity
via cable armor termination
t Available in metric or NPT threads
t Ingress protection (solid and liquid) IP66
Mfr.’s Model No.
2016E1FX5
20SE1FX5
20E1FX5
25SE1FX5
25E1FX5
t Ambient temperature — -60˚ C to 130˚ C
t For lead sheath version, replace digit 1 in part number with 2
t Detachable armor cone and AnyWay clamping ring arrangement facilitate remote
make off and enable cable to be disconnected from equipment
t Inspection of the armor can be carried out while still maintaining
the explosion-proof protection mode of the enclosure
t To order E1FW series cable glands replace the X
in the E1FX series catalog number with W
Thread
Inner Capacity Min.
Inner Capacity Max.
Outer Capacity Min.
Outer Capacity Max.
Cable Gland Size
M20
M20
M20
M25
M25
3.1 mm
9.1 mm
6.5 mm
11.1 mm
11.1 mm
8.7 mm
11.7 mm
14.0 mm
20.0 mm
20.0 mm
6.1 mm
9.5 mm
12.5 mm
14.0 mm
18.2 mm
11.5 mm
15.9 mm
20.9 mm
22.0 mm
26.2 mm
20S16
20S
20
25S
25
Appleton® C2KX Series Marine Cable Connector
Cable connector for wire braid armor and jacketed cables is suitable for use in ordinary and wet
locations and provides mechanical retention and electrical continuity via a removable armor termination.
t
t
t
t
Connector provides an environmental seal on the cable outer jacket and is UL® Listed for NPT or metric entry threads
C2KX forms part of a comprehensive range of deluge proof connectors for marine shipboard and IEE45 armor jacketed cables
Armor termination — removable armor cone and ring
Sealing technique — displacement seal concept; sealing area—outer sheath
Mfr.’s Model No.
2016C2KX5
20SC2KX5
20C2KX5
25SC2KX5
25C2KX5
Thread
Armor Range Max.
Cable Bedding Diameter Max.
Overall Diameter Min.
Overall Diameter Max.
Cable Gland Size
M20
M20
M20
M25
M25
0.9 mm
0.9 mm
0.9 mm
0.9 mm
0.9 mm
11.7 mm
11.7 mm
13.9 mm
19.9 mm
19.9 mm
0.6 mm
9.4 mm
12.4 mm
13.9 mm
18.2 mm
11.5 mm
15.9 mm
20.9 mm
21.9 mm
26.1 mm
20S16
20S
20
25S
25
51
Zone 1 & 2, and 21 and 22
Ex e Certified
Ingress protection IP 66
Ambient temperature —
-20˚ C to 55˚ C
t Black polyamide body
Fittings
Sealing cables around the WORLD with...
Traditional barrier-type cable glands employing epoxy/clay-based sealing compound have been used in
hazardous areas for many years to provide effective explosion protection. The barrier material is a two-part
formula that needs to be mixed thoroughly on-site at each cable end before application. This is not only time
consuming, but requires extreme diligence. However, a certain degree of risk is associated with this traditional
installation process and this risk increases with the number of conductors in multi-core cables.
The standard technique involves the “packing” of the sealing compound between and around the individual
cable conductors which is required to form a complete seal, and then leaving the assembled cable gland to cure,
without disturbance, for several hours before connecting the cable to the equipment. Failure to correctly perform
the mix and/or application of the compound or remature disturbance of the conductors may lead to critical failure
of the barrier seal or extensive rework being required, assuming that such an error can be detected.
RAPID Ex is a liquid pour, fast curing, liquid resin barrier seal that installs in seconds and cures in minutes. Its unique
formula begins with a low viscosity liquid that flows into the cable interstices completely surrounding the cable conductors,
and in the process displacing the air from the cable gland’s sealing chamber, ensuring the “perfect seal”. The viscosity then
increases and completely cures in less than 40 minutes.
Reduces Risk — delivers unprecedented reliability, minimises installation time, and is clean and easy to use.
Is certified for use in Hazardous Areas with Global Certification, including approval under IEC and NEC installation codes.
This product meets the requirements of AS/NZS 60079 standards and is IEC Ex certified.
Is supplied with a series of CMP barrier glands including PX2K, PX2KW, PX2KX, PXSS2K, and PXRC. Simply add the suffix “REX”
when ordering, e.g. PX2KWREX.
Installation Benefits
Traditional
Compound Gland
Time
Traditional
Clay-Based Compound
RAPID
RAPID
Cable Installation
Process
52
Cure Process
CMP barrier gland
incorporating
Fittings
CMP Products A2 Cable Gland
CMP Products T3CDS (Triton) Cable Gland
Compliance with EN 60079, IEC 60079, AS/NZS 60079 BS 6121,
EN 50262 & IEC 62444
EN 50262 & IEC 62444
t Displacement seal on cable outer sheath
t Ingress protection
IP66, IP67, IP68,
CSA Enclosure Type 4X
t Deluge tested to
DTS 01:91
Mfr.’s Model No.
Description
Thread Size
Overall Cable Diameter
16A21RA
20S16A21RA
20SA21RA
20A21RA
25A21RA
32A21RA
40A21RA
50SA21RA
50A21RA
63SA21RA
63A21RA
75SA21RA
75A21RA
90A21RA
100A21RA
115A21RA
130A21RA
16 A2
20s/16 A2
20s A2
20 A2
25 A2
32 A2
40 A2
50s A2
50 A2
63s A2
63 A2
75s A2
75 A2
90 A2
100 A2
115 A2
130 A2
M16 x 1.5
M20 x 1.5
M20 x 1.5
M20 x 1.5
M25 x 1.5
M32 x 1.5
M40 x 1.5
M50 x 1.5
M50 x 1.5
M63 x 1.5
M63 x 1.5
M75 x 1.5
M75 x 1.5
M90 x 2
M100 x 2
M115 x 2
M130 x 2
3.2-8.7 mm
3.2-8.7 mm
6.1-11.7 mm
6.5-14.0 mm
11.1-20.0 mm
17.0-26.3 mm
23.5-32.2 mm
31.0-38.2 mm
35.6-44.1 mm
41.5-50.0 mm
47.2-56.0 mm
54.0-62.0 mm
61.1-68.0 mm
66.6-79.4 mm
76.0-91.0 mm
86.0-98.0 mm
97.0-115.0 mm
Mfr.’s Model No.
Description
Thread Size
Inner Bedding
Cable Diameter
Overall Cable
Diameter
16T3CDS1RA
20S16T3CDS1RA
20ST3CDS1RA
20T3CDS1RA
25ST3CDS1RA
25T3CDS1RA
32T3CDS1RA
40T3CDS1RA
50ST3CDS1RA
50T3CDS1RA
63ST3CDS1RA
63T3CDS1RA
75ST3CDS1RA
75T3CDS1RA
90T3CDS1RA
100T3CDS1RA
115T3CDS1RA
130T3CDS1RA
16 T3CDS
20S16 T3CDS
20S T3CDS
20 T3CDS
25S T3CDS
25 T3CDS
32 T3CDS
40 T3CDS
50S T3CDS
50 T3CDS
63S T3CDS
63 T3CDS
75S T3CDS
75 T3CDS
90 T3CDS
100 T3CDS
115 T3CDS
130 T3CDS
M16 x 1.5
M20 x 1.5
M20 x 1.5
M20 x 1.5
M25 x 1.5
M25 x 1.5
M32 x 1.5
M40 x 1.5
M50 x 1.5
M50 x 1.5
M63 x 1.5
M63 x 1.5
M75 x 1.5
M75 x 1.5
M90 x 2.0
M100 x 2.0
M115 x 2.0
M130 x 2.0
3.1-8.7 mm
3.1-8.7 mm
6.1-11.7 mm
6.5-14.0 mm
11.1-20.0 mm
11.1-20.0 mm
17.0-26.3 mm
22.0-32.2 mm
29.5-38.2 mm
35.6-44.1 mm
40.1-50.0 mm
47.2-56.0 mm
52.8-62.0 mm
59.1-68.0 mm
66.6-80.0 mm
76.0-91.0 mm
86.0-98.0 mm
97.0-115.0 mm
6.1-13.2 mm
6.1-13.2 mm
9.5-15.9 mm
12.5-20.9 mm
14.0-22.0 mm
18.2-26.2 mm
23.7-33.9 mm
27.9-40.4 mm
35.2-46.7 mm
40.4-53.1 mm
45.6-59.4 mm
54.6-65.9 mm
59.0-72.1 mm
66.7-78.5 mm
76.2-90.4 mm
86.1-101.5 mm
101.5-110.3 mm
114.2-123.3 mm
CMP Products A2F Cable Gland
EN 50262 & IEC 62444
CMP Products E1FW Cable Gland
EN 50262 & IEC 62444
t Displacement seal on cable outer sheath
t Ingress protection
IP66, IP67, IP68,
CSA Enclosure Type 4X
t Deluge tested to
DTS 01:91
t IEC Ex Triple Certified Ex d IIC, Ex e II,
Ex nR II for Zones 1, 2, 21, 22, and DIP
t Designed for SWA and easy cable
disconnection
t Ingress protection IP66
t Deluge tested to DTS 01:91
t IEC Ex Triple Certified
Ex d IIC, Ex e II, Ex nR II for
Zones 1, 2, 21, 22, anwd DIP
Mfr.’s Model No.
Description
Thread Size
16A2F1RA
20S16A2F1RA
20SA2F1RA
20A2F1RA
25A2F1RA
32A2F1RA
40A2F1RA
50SA2F1RA
50A2F1RA
63SA2F1RA
63A2F1RA
75SA2F1RA
75A2F1RA
90A2F1RA
100A2F1RA
115A2F1RA
130A2F1RA
16 A2F
20s/16 A2F
20s A2F
20 A2F
25 A2F
32 A2F
40 A2F
50s A2F
50 A2F
63s A2F
63 A2F
75s A2F
75 A2F
90 A2F
100 A2F
115 A2F
130 A2F
M16 x 1.5
M20 x 1.5
M20 x 1.5
M20 x 1.5
M25 x 1.5
M32 x 1.5
M40 x 1.5
M50 x 1.5
M50 x 1.5
M63 x 1.5
M63 x 1.5
M75 x 1.5
M75 x 1.5
M90 x 2
M100 x 2
M115 x 2
M130 x 2
3.2-8.7 mm
3.2-8.7 mm
6.1-11.7 mm
6.5-14.0 mm
11.1-20.0 mm
17.0-26.3 mm
23.5-32.2 mm
31.0-38.2 mm
35.6-44.1 mm
41.5-50.0 mm
47.2-56.0 mm
54.0-62.0 mm
61.1-68.0 mm
66.6-80.0 mm
76.0-91.0 mm
86.0-98.0 mm
97.0-115.0 mm
Mfr.’s Model No.
Description
Thread Size
Inner Bedding
Cable Diameter
Overall Cable
Diameter
16E1FW1RA
20S16E1FW1RA
20SE1FW1RA
20E1FW1RA
25SE1FW1RA
25E1FW1RA
32E1FW1RA
40E1FW1RA
50SE1FW1RA
50E1FW1RA
63SE1FW1RA
63E1FW1RA
75SE1FW1RA
75E1FW1RA
90E1FW1RA
100E1FW1RA
115E1FW1RA
130E1FW1RA
16 E1FW
20s/16 E1FW
20s E1FW
20 E1FW
25s E1FW
25 E1FW
32 E1FW
40 E1FW
50s E1FW
50 E1FW
63s E1FW
63 E1FW
75s E1FW
75 E1FW
90 E1FW
100 E1FW
115 E1FW
130 E1FW
M16 x 1.5
M20 x 1.5
M20 x 1.5
M20 x 1.5
M25 x 1.5
M25 x 1.5
M32 x 1.5
M40 x 1.5
M50 x 1.5
M50 x 1.5
M63 x 1.5
M63 x 1.5
M75 x 1.5
M75 x 1.5
M90 x 2.0
M100 x 2.0
M115 x 2.0
M130 x 2.0
3.1-8.6 mm
3.1-8.6 mm
6.1-11.6 mm
6.5-13.9 mm
11.1-19.9 mm
11.1-19.9 mm
17.0-26.2 mm
22.0-32.1 mm
29.5-38.1 mm
35.6-44.0 mm
40.1-49.9 mm
47.2-55.9 mm
52.8-61.9 mm
59.1-67.9 mm
66.6-79.9 mm
76.0-90.9 mm
86.0-97.9 mm
97.0-114.9 mm
6.1-13.2 mm
6.1-13.2 mm
9.5-15.9 mm
12.5-20.9 mm
14.0-22.0 mm
18.2-26.2 mm
23.7-33.9 mm
27.9-40.4 mm
35.2-46.7 mm
40.4-53.1 mm
45.6-59.4 mm
54.6-65.9 mm
59.0-72.1 mm
66.7-78.5 mm
76.2-90.4 mm
86.1-101.5 mm
101.5-110.3 mm
114.2-123.3 mm
53
t Compensating displacement seal
prevents over tightening
t Designed for SWA, GSWB, STA and
easy cable disconnection
t Ingress protection IP66
t Deluge tested DTS 01:91
t IEC Ex Triple Certified Ex d IIC, Ex e II,
Ex nR II for Zones 1,2,21,22 and DIP
Fittings
CMP Products PX2K-REX Liquid Pour Barrier Gland
Compliance with EN 60079, IEC 60079, AS/NZS 60079 BS 6121, EN 50262 & IEC 62444
t
t
t
t
t
t
t
t
t
High-quality design
Brass material grade — CuZn39Pb3 (CW614N) to EN12168
Electroless nickel-plated brass finish available
Easy installation, fast curing, liquid pour “Rapid Ex” resin
Greater productivity
Wide sealing range; wide temperature range
Ingress protection IP66, IP67, IP68
Deluge tested to DTS 01:91; Marine approvals available
IEC Ex Triple Certified Ex d IIC, Ex e II, Ex nR II for Zones 1, 2, 21, 22, and DIP
Mfr.’s Model No.
Description
Thread Size
20S16PX2KREX1RA
20SPX2KREX1RA
20PX2KREX1RA
25SPX2KREX1RA
25PX2KREX1RA
32PX2KREX1RA
40PX2KREX1RA
50SPX2KREX1RA
50PX2KREX1RA
63SPX2KREX1RA
63PX2KREX1RA
75SPX2KREX1RA
75PX2KREX1RA
90PX2KREX1RA
100PX2KREX1RA
20S16 PX2KREX
20S PX2KREX
20 PX2KREX
25S PX2KREX
25 PX2KREX
32 PX2KREX
40 PX2KREX
50S PX2KREX
50 PX2KREX
63S PX2KREX
63 PX2KREX
75S PX2KREX
75 PX2KREX
90 PX2KREX
100 PX2KREX
M20 x 1.5
M20 x 1.5
M20 x 1.5
M25 x 1.5
M25 x 1.5
M32 x 1.5
M40 x 1.5
M50 x 1.5
M50 x 1.5
M63 x 1.5
M63 x 1.5
M75 x 1.5
M75 x 1.5
M90 x 2.0
M100 x 2.0
6.1-13.2 mm
9.5-15.9 mm
12.5-20.9 mm
14.0-22.0 mm
18.2-26.2 mm
23.7-33.9 mm
27.9-40.4 mm
35.2-46.7 mm
40.4-53.1 mm
45.6-59.4 mm
54.6-65.9 mm
59.0-72.1 mm
66.7-78.5 mm
76.2-90.4 mm
86.1-101.5 mm
CMP Products PXSS2K-REX Liquid Pour Barrier Gland
Compliance with EN 60079, IEC 60079, AS/NZS 60079 BS 6121, EN 50262 & IEC 62444
t
t
t
t
t
t
t
t
t
High-quality design
Easy installation, fast curing, liquid pour “Rapid Ex” resin
Greater productivity
Wide sealing range; wide temperature range
Ingress protection IP66, IP67, IP68
Deluge tested to DTS 01:91; Marine approvals available
IEC Ex Triple Certified Ex d IIC, Ex e II, Ex nR II for Zones 1, 2, 21, 22, and DIP
Mfr.’s Model No.
Description
Thread Size
20S16PXSS2KREX1RA
20SPXSS2KREX1RA
20PXSS2KREX1RA
25SPXSS2KREX1RA
25PXSS2KREX1RA
32PXSS2KREX1RA
40PXSS2KREX1RA
50SPXSS2KREX1RA
50PXSS2KREX1RA
63SPXSS2KREX1RA
63PXSS2KREX1RA
75SPXSS2KREX1RA
75PXSS2KREX1RA
90PXSS2KREX1RA
100PXSS2KREX1RA
20S16 PXSS2KREX
20S PXSS2KREX
20 PXSS2KREX
25S PXSS2KREX
25 PXSS2KREX
32 PXSS2KREX
40 PXSS2KREX
50S PXSS2KREX
50 PXSS2KREX
63S PXSS2KREX
63 PXSS2KREX
75S PXSS2KREX
75 PXSS2KREX
90 PXSS2KREX
100 PXSS2KREX
M20 x 1.5
M20 x 1.5
M20 x 1.5
M25 x 1.5
M25 x 1.5
M32 x 1.5
M40 x 1.5
M50 x 1.5
M50 x 1.5
M63 x 1.5
M63 x 1.5
M75 x 1.5
M75 x 1.5
M90 x 2.0
M100 x 2.0
6.1-13.2 mm
9.5-15.9 mm
12.5-20.9 mm
14.0-22.0 mm
18.2-26.2 mm
23.7-33.9 mm
27.9-40.4 mm
35.2-46.7 mm
40.4-53.1 mm
45.6-59.4 mm
54.6-65.9 mm
59.0-72.1 mm
66.7-78.5 mm
76.2-90.4 mm
86.1-101.5 mm
54
Fittings
t
t
t
t
t
CMP Products 737 Adaptor and Reducer
CMP Products 787 Right Angled Adaptor
Compliance with EN 60079, IEC 60079,
AS/NZS 60079 BS 6121, EN 50262 & IEC 62444
AS/NZS 60079 BS 6121, EN 50262 & IEC 62444
High-quality design
IEC Ex Certified Ex d IIC, Ex e II for Zones 1, 2, 21, 22, and DIP
Marine approvals available
Description
737DM1M2
737DM2M3
737DM3M4
737DM4M5
737DM5M6
737DM6M7
737DM7M8
737DM2M1
737DM3M2
737DM4M3
737DM5M4
737DM6M5
737DM7M6
737DM8M7
Adaptors; Male Thread: M16 x 1.5; Female Thread: M20 x 1.5
Reducers; Male Thread: M20 x 1.5; Female Thread: M16 x 1.5
CMP Products 757 Stopper Plug
AS/NZS 60079 BS 6121, EN 50262 & IEC 62444
High-quality design
Mfr.’s Model No.
Description
757DM1
757DM2
757DM3
757DM4
757DM5
757DM6
757DM7
Thread Size: M16 x 1.5
CMP Products 767 Stopper Plug
AS/NZS 60079 BS 6121, EN 50262 & IEC 62444
t
t
t
t
t
High-quality design
Mfr.’s Model No.
Description
767DM1
767DM2
767DM3
767DM4
767DM5
767DM6
767DM7
t
t
t
t
t
High-quality design
Mfr.’s Model No.
Description
787DM2M2
787DM3M3
787DM4M4
787DM5M5
787DM6M6
Male Thread: M20 x 1.5; Female Thread: M20 x 1.5
Mfr.’s Model No.
t
t
t
t
t
CMP Products 781E Breather/Drain Plug
AS/NZS 60079 BS 6121, EN 50262 & IEC 62444
t
t
t
t
t
High-quality design
Electroless nickel-plated brass finish
Mfr.’s Model No.
Description
781EM2
781EM3
781ET1
781ET2
Thread Size: 1/2" NPT
CMP Products 781D Breather/Drain Plug
AS/NZS 60079 BS 6121, EN 50262 & IEC 62444
t
t
t
t
t
High-quality design
Electroless nickel-plated brass finish
Mfr.’s Model No.
Description
781DM2
781DM3
781DT1
781DT2
55
Fittings
Woodhead® Deluxe Cord Grips
t
t
t
t
36248
Woven of stainless steel mesh with an anodized aluminum body for corrosion resistance
Absorb direct pull and eliminate strain
Use with processing equipment, hand tools, and extension cord sets
UL® Listed, CSA Certified
Mfr.’s
Model No.
Description
36250
36251
36254
36256
36245
36257
36259
36261
36263
36248
1/2" NPT Straight Male Grips; O.D. Min.: 0.187", O.D. Max.: 0.250"
Mfr.’s
Model No.
Description
36351
36265
36267
36269
36270
36271
36272
36487
36813
3/4" NPT 90˚ Male Grips; O.D. Min.: 0.500", O.D. Max.: 0.620"
1" NPT Straight Male Grips; O.D. Min.: 0.625", O.D. Max.: 0.750"
1-1/4" NPT Straight Male Grips; O.D. Min.: 0.875", O.D. Max.: 1.000"
1-1/4" NPT Straight Male Grips; O.D. Min.: 1.000", O.D. Max.: 1.120"
think safety.
think WESCO.
WESCO Distribution has recently expanded our Safety product portfolio to include
more critical environmental PPE and Industrial Safety products. Our offering includes:
t Respiratory Protection
t Gas Detection
t Hazardous Storage
t Hand Protection
t Spill Control and
Containment
t Confined Space
t Head and Eye
Protection
In today’s ever-changing regulatory landscape, WESCO can help
customers find products and solutions that solve your health and
safety problems and help you stay compliant.
56
t Fall Protection
And Much More!
Fittings
Thomas & Betts Tite-Bite® Armored Cable
and Flexible Metal Conduit Connectors
t Use to connect and effectively bond
armored cable or flexible metal
conduit to a box or enclosure
t Straight-angle design
t Provide single cable opening
t Withstand vibration or strain
t Double grip saddle is easy to
install and firmly secures and
centralizes conduit
302-TB
Mfr.’s Model No.
Description
3110-TB
Steel with Nylon Insulated Throat; 0.44–0.66" O.D. Min.-Max.,
3/8" (1/2" KO) Trade Size
1/2" Trade Size
3/4" Trade Size
Steel with Non-Insulated Throat; 0.44–0.66" O.D. Min.-Max.,
1/2" Trade Size
3/4" Trade Size
3112
3115
300-TB
302-TB
304
Thomas & Betts Tite-Bite® 90˚ Armored Cable
and Flexible Metal Conduit Connectors
t Use to connect and effectively bond armored cable
or flexible metal conduit to a box or enclosure
t Withstand vibration or strain
t Saddle firmly secures and centralizes conduit
t Provide a single cable opening
t Feature one-screw,
angled saddle installation
t Peep hole on top of insulated connectors
enables easy inspection of the ABC bushing
t Narrow design makes it easy to install
connectors in adjacent knockouts
Mfr.’s Model No.
321-TB
323
3132
3135
Thomas & Betts Stainless Steel Liquidtight
Conduit Connectors
The strength of steel — with superior corrosion resistance.
t Ideal for industrial MRO and OEM applications in food and beverage, pharmaceutical,
petrochemical, wastewater, salt water, and other corrosive environments
t Connect metallic-cored liquidtight conduit to a box or enclosure
t Type 304 stainless steel body and gland nut resist
corrosion far better than other metallic fittings
t Stronger, more UV resistant than nonmetallic
fittings
t Ground cones are available in 1-1/4”, 1-1/2”,
and 2” sizes and are brass/nickel plated
t Available in straight, 45˚, and 90˚ angled
configurations to fit conduit from 3/8” to 2”
t UL® Listed ratings — 3, 3R, 4, 4X
t CSA Certified
5331SST
5341SST
5351SST
Mfr.’s Model No.
Description
5331SST
5341SST
5351SST
Straight; 3/8" Trade Size
45˚ Angled; 3/8" Trade Size
90˚ Angled; 3/8" Trade Size
Thomas & Betts Fittings Stainless Steel Type A
Liquidtight Straight Connectors
Stainless steel construction for unbeatable strength
and corrosion resistence.
3135
t Type 304 stainless steel body,
gland, and locknut
t Supplied with Series 5262
sealing gaskets
t UL® Listed and CSA Certified for
use with Type A conduit only
Description
1/2" Trade Size
1/2" Trade Size
3/4" Trade Size
63202SST
Mfr.’s Model No.
Description
6302SST
6303SST
6304SST
6305SST
1/2" Conduit Size
3/4" Conduit Size
1" Conduit Size
1-1/4" Conduit Size
57
3115
Thomas & Betts Blackburn® One-Hole Mount Lugs
Dual-rated ALCUL™ mechanical connectors.
t Straight-tongue design
t Standard set-screw conductor entry
t For copper and/or aluminum
conductors
t Easy installation with no tools required
t Bodies are tin-plated aluminum for
low contact resistance
t Rated 90˚ C
ADR2
Lugs, Clamps
Thomas & Betts Blackburn® Compression Connectors
Featuring the Color-Keyed System – Standard-Barrel
One-Hole Design
t Use with all copper cables
t Made of electro-tin plated, high conductivity
wrought copper
t Cable inspection hole ensures proper cable
placement before crimping
t Color-coded and marked with conductor
and die information
t UL® Listed (rated 600V to 35kV) and
CSA Certified
Mfr.’s Model No.
Description
54113
For Cu Code Conductors; 1/2" Screw/Stud Size,
2.53"L Lug x 1.10"W Tongue, 250 kcmil Conductor Size
For Cu Code Conductors; 1/2" Screw/Stud Size,
2.62"L Lug x 1.37"W Tongue, 300 kcmil Conductor Size
For Cu Code and Flex Conductors; #10 Screw/Stud Size,
1.20"L Lug x 0.40"W Tongue, #8, #8–37/24 Flex Conductor Size
For Cu Code and Flex Conductors; 1/4" Screw/Stud Size,
1.23"L Lug x 0.45"W Tongue, #8, #8–37/24 Flex Conductor Size
For Cu Flex Conductors; 3/8" Screw/Stud Size,
2.40."L Lug x 1.25"W Tongue, 4/0, 550/24 Flex Conductor Size
For Cu Flex Conductors; 1/2" Screw/Stud Size,
2.79"L Lug x 1.37"W Tongue, 775/24 Flex Conductor Size
ADR11-21
54115
Mfr.’s Model No.
Description
54104
ADR2
1-Conductor Lug; Slot Screw Type, 1/4" Screw/Stud Size,
#14–2 Wiring Min.-Max.
2-Conductor Lug; Slot Screw Type, 5/16" Screw/Stud Size,
#14–1/0 Wiring Min.-Max.
54130
ADR11-21
58163
58171
Thomas & Betts Blackburn Two-Hole Mount Lug
54113
®
t Rated 90˚ C
t NEMA spaced, 1-3/4” O.C. mounting holes
t Tin-plated aluminum body
with straight tongue
t Standard set-screw
conductor entry
ADR50-32
Mfr.’s Model No.
Description
ADR50-32
3-Conductor Lug; Hex Socket Screw Type, 1/2" Screw/Stud Size,
4–500 kcmil Wiring Min.-Max.
Thomas & Betts Blackburn® Four-Hole Mount Lugs
Thomas & Betts Kindorf® King Cobra®
Cable and Pipe Clamps
Takes a bite out of installation time!
t Installs quickly and securely using one hand
t Universal bolt head accepts a range of tools
t Parallel hook design keeps conduits and cable
square with strut
t Eliminates the guesswork from clamp selection
— one catalog number attaches equal trade sizes
of EMT and rigid conduit
t Reconfigure wiring without complete disassembly
t Remove cables easily without disturbing
neighboring clamps
Mfr.’s Model No.
Description
KCPC050
GoldGalv® Finish; 1/2" for EMT and Rigid Conduit Trade Size;
0.650–0.890" Cable O.D. Range
GoldGalv® Finish; 3/4" for EMT and Rigid Conduit Trade Size;
GoldGalv® Finish; 1" for EMT and Rigid Conduit Trade Size;
GoldGalv® Finish; 1-1/4" for EMT and Rigid Conduit Trade Size;
t
t
t
t
t
Rated 90˚ C
NEMA spaced, 1-3/4” O.C. mounting holes
Standard set-screw conductor entry
Tin-plated aluminum body with straight tongue
UL® Listed and CSA Certified
Mfr.’s Model No.
Description
ADR60-34D
#2–600 kcmil Wiring Min.-Max.
ADR35-34
ADR60-44D
KCPC075
KCPC100
KCPC125
KCPC150
KCPC200
KCPC250
KCPC300
KCPC350
KCPC400
58
KCPC075
Grounding & Dischange
Burndy® Mechanical Grounding Connectors
Burndy® HYGROUND®
BURNDY® offers a complete line of mechanical grounding products.
Below is a list of a few of the most common products within the Harsh &
Hazardous marketplace. Contact BURNDY® for a full list of items.
BURNDY HYGROUND® Irreversible Compression Grounding System
meets the most stringent safety and performance requirements,
including those of OSHA and nuclear power plant design. No hot work
permit necessary, unlike exothermic connection method. Contact
BURNDY for full product offering.
t Only small listing of items shown
below; there are many other sizes and
configurations
t Complete system consists of connectors
for grid cross connections, taps, splices,
cable-to-ground rod, ground plates,
and terminations
t Meets NEC code, section 250-50 and
250-64
t UL® 467 Listed; May be used in
direct burial or concrete embedded
grounding applications
t Pure wrought copper extrusions, rod,
and seamless tubing
t Heavy-duty connector design
t Range take designs to assist in keeping
inventory requirements low
t Safely installed at low cost,
installations are typically under
three minutes
t Hot work permits not required to
install in hazardous areas
YGHC26C26
YGL29C2
Mfr.’s Model No.
Description
GAR1826
GAR1926
2" Tube IPS, 2" to 2-3/8" Rod Size, #4 Sol. - 2/0 Str Cable
2-1/2" Tube IPS, 2-1/2" to 2-7/8" Rod Size,
2/0 Sol. - 250 kcmil Cable
1-1/2" Tube IPS, 1-3/8" to 1-1/2" Rod Size,
#4 Sol. to 2/0 Str. Cable
1/2" to 1" Water Pipe, #4-#6 Rebar,
3/8" to 1" Ground Rod with #10-#2 Str. Tap
1/2" to 1" Water Pipe, #4-#6 Rebar,
3/8" to 1" Ground Rod with #8 to 4/0 AWG Tap
1/2", 3/4", 1" Conduit, Pipe, or Water Tube, #14 to 1/0 Wire
2-1/2", 3", 3-1/2", 4" Conduit, Pipe, or Water Tube,
#6 to 250 kcmil Wire
#1 Str. to 4/0 Str. Conductor
GAR1626
C11K16D
C11HD4/0DB
GC15A
GC22A
KC28B1
Mfr.’s Model No.
Description
YGL29C29
HYGRID™ Cross Connector Cable-to-Cable #2-250 kcmil on both
Elements; Cable-to-Ground Rod 1/2"-5/8" Ground Rod on One
Element, #6 Sol-#2 Str on Other; Cable to Rebar 3/8"-1/2" Rebar
on One Element, #2 Str-250 kcmil on Other
YGL29C2
HYGRID™ Cross Connector Cable-to-Cable #1-250 kcmil on One
Element, #6 Sol-#2 Str on Other; Cable-to-Ground Rod 1/2"-5/8"
Ground Rod on One Element, #6 Sol-#2 Str on Other; Cable to
Rebar 3/8"-1/2" Rebar on One Element, #6 Sol-#2 Str on Other
YGHC29C29
HYTAP™ Connector Accepting Run 3/0 Str-250 kcmil or 1/2"-5/8"
Rod; Tap 6 Sol-2/0 Str.
Burndy® SERVIT®
Compact, high-strength, SERVIT® split-bolt
highly resistant to season cracking and
corrosion. Shown is a small representation,
contact BURNDY for full product offering.
t Maximum pressure provided to assure a secure
connection on all combinations of run and tap
conductors
t Free-running threads
t Easy-to-grip wrench flats
Mfr.’s Model No.
Description
KS23
6 Str. - 2 Str. Run/Tap; Minimum Tap with
Maximum Run 14 Str.
4 Str. - 1/0 Str. Run/Tap; Minimum Tap with
Maximum Run 14 Str.
1 Str. - 3/0 Str. Run/Tap; Minimum Tap with
Maximum Run 8 Sol.
1 Str. - 250 kcmil Run/Tap; Minimum Tap with
Maximum Run 8 Str.
KS25
KS27
KS29
KS25
59
t All BURNDY® mechanical grounding connectors have been designed for easy
installation and outstanding durability
t Type GAR mechanical grounding connectors are suitable for Wire-to-Rebar, Fence
Post Grounding, and Wire-to-Pipe applications for parallel or 90° configurations
t Most styles feature one wrench installation, and are UL® 467 Listed and acceptable for
direct burial (contact BURNDY for full information and product listings)
t Type C11K clamps connect grounding conductor to water pipes, copper tubes, ground
rods, or rebar and have an open-face design and lay-in feature for the tap conductor
without the need for cutting
t Type C11HD-DB ground clamps connect grounding conductor, EMT, or rigid conduit
to water pipes, copper tubes, ground rods, or rebar, and feature a hub that swings 360°
for easy alignment
t Type GC-A clamps are UL® Listed for use with for copper and aluminum conductors
to copper water pipes, galvanized pipes, or steel conduit; tin plated for low-contact
resistance and prevents galvanic corrosion
t Type KC SERVIT POST™ is for direct burial; used to ground one or two cables to steel
structures, fence posts, transformers, etc., and can also be used to tap one or two cables
from bus bar
Burndy® Grounding Studs
Burndy® Vehicle Ground Disconnect Clamps
Temporary ground, perfect for use on railcars or other
locations with steel bumpers, such as dump or chemical
trucks, hazardous waste tankers, or petroleum vehicles.
Ground clamps for grounding gasoline trucks, tank cars, aircraft, etc.,
where danger of explosion due to static electricity exists.
t 1/2" threads
t Available with stainless steel hardware
(GCB63T13G1SS)
t Static ground suitable for use in oil/petroleum
refineries, steel mills, and coal processing plants
Grounding & Discharge
Mfr.’s Model No.
Description
GCB63T13G1
GCB63T13G1SS
Grounding Stud
Grounding Stud with
Stainless Steel Hardware
GCB63T13G1
t Corrosion resistant
t Supplied with
non-sparking,
adjustable, replaceable
contact grip screws
t GIE4CG3 vehicle ground clamp with
beryllium copper contact grip screws
t GIE4CG4 vehicle ground clamp with stainless
steel contact grip screws
Mfr.’s Model No.
Description
GIE4CG3
Vehicle Ground Disconnect Clamp with Beryllium Copper
Contact Grip Screws
Vehicle Ground Disconnect Clamp with Stainless Steel
Contact Grip Screws
GIE4CG4
Burndy® Static Discharge Reels
BURNDY® Static Discharge Reels are used
to dissipate static charge buildup developed
while filling or dispensing fuel or other
combustible liquids from fuel trucks or railcars.
t
t
t
t
t
t
Rugged steel construction
Compact enclosed design
Positive ratchet lock
Ratchet on/off switch
100A universal jaw-type grounding clamp(s)
50' cable length
Mfr.’s Model No.
Description
BSD2050
Heavy-Duty Steel Aircraft Cable,
50' Length
Clear Nylon Covered Steel Cable,
50' Length
‘Y’ Style with 2 Grounding
Clamps Attached, 50' Length
BSD2050-N
BSD2050-Y
60
GIE4CG
Wire & Cable
In This Section
WESCO & General Cable .........62–63
Performance Cables .................64–65
Industrial Cables .......................65–67
Tray Cables ................................... 68
Conductors ..............................68–70
Cable Ties ..................................... 71
Tubing & Harnessing ...................... 72
This is a
sampling of the
Wire & Cable
products that
WESCO offers.
61
61
WESCO & GENERAL CABLE
We satisfy virtually every cabling requirement around the globe
Upstream Exploration & Production
From exploration and extraction
to production and processing
of natural resources, General
Cable’s products satisfy virtually
every cabling requirement around
the globe. From resistance to
oils, hydrocarbons and chemicals
to continuing performance
in sub-zero or extreme high
temperatures, General Cable’s
commitment to continuous
research and development
provides an ever-growing range
of materials and designs required
by upstream, midstream, and
downstream oil, gas, and
petrochemical customers around
the globe. General Cable — the
One Company source for global
high-performance quality cable
and services.
The arduous environmental challenges of onshore and offshore oil and gas exploration
and production have led to effective cable designs created by General Cable’s specialized
team of expert engineers. Our cabling solutions not only protect lives, but also preserve the
operational integrity of mission-critical equipment in the most hazardous environments.
Onshore
Deeper drilling for natural gas and resources in extreme, remote locations, from Alaska’s
North Slope to the deserts of the Middle East, imposes demands on land rig cabling.
General Cable offers a full platform of high-quality products for these challenging applications.
Offshore
Topside – To meet today’s increasing power requirements, offshore rigs, production
platforms, FPSOs, and ships rely on General Cable’s comprehensive range of high-tech,
application-specific cables for stabilization and directional drilling (ask about Polyrad®).
Subsea – ROVs and winches exploring the deeper waters of larger reserves require
specialized subsea cables. General Cable’s tailor-made solutions service this vital seabed
infrastructure while meeting stringent industry requirements.
Midstream and Downstream LNG & Refining
LNG and refining systems are more complex than ever, and space is at a premium.
Yet safety remains the number one priority, followed closely by uptime and productivity.
With that in mind, General Cable continues to diversify its product offering by investing
in precision-engineered, state-of-the-art equipment to produce a full line of midstream
and downstream application products.
General Cable’s instrumentation, power, and control cables help maintain the operational
integrity of LNG facilities, refineries, and petrochemical plants to ensure a lifetime of efficiency
and throughput. This tested and proven line of industrial-grade, hazardous location (CCW)
cables utilizes an extensive selection of application-specific compounds, including PVC,
cross-linked polyethylene, cross-linked polyolefin, ethylene propylene rubber, low-smoke
zero-halogen polyolefins, and thermoplastic elastomers.
Continuously Corrugated Welded Cable (CCW) products are used in hazardous locations
(in accordance with NEC® Articles 500-505) requiring cables that are impervious to gas,
liquids, and vapors and terminated with explosion-proof glands to electrical equipment.
CCW is standardized by the refining industry as the only acceptable product construction
(reference API RF14F and 14FZ) and is a staple in offshore production platforms, refineries,
LNG facilities, and petrochemical processing mills. The CCW product line is ideal for use in
the world’s prominent “oil patches” in the USA, Indonesia, Mexico, the Caribbean,
South America, and the Middle East.
QUpstream Onshore Cable — Land Rig Solutions
Deeper drilling for natural gas and resources in extreme, remote locations, from Alaska's North Slope to the deserts of the Middle East,
imposes demands on land rig cabling. General Cable offers a full platform of high-quality products for these challenging applications.
Product Type
Application
Location
IEEE 1580 Type P
IEEE 1580 Type P
Electrical Submersible Pump Cables
Application-Specific Cable Assemblies
Power, Control, and Instrumentation Cables
AC Variable Frequency Drive Cables
Electrical Submersible Pump/Artificial Lift Cables
Land Drilling Rigs
Land Drilling Rigs
Oil and Gas Wells, Coal Bed Methane
Top Drive Power and Control Service Loops
62
QUpstream Offshore Cable — Topside Solutions
To meet today's increasing power requirements, offshore rigs, production platforms, FPSOs and ships rely on General Cable's comprehensive range of high-tech,
application-specific cables for stabilization and directional drilling (ask about Polyrad®).
Product Type
Application
Location
MOR Polyrad® XT
MOR Polyrad® XT VFD
Low-Smoke, Zero-Halogen
Low-Smoke, Zero-Halogen IEC 60331
MV-RIG®
CCW®
IEEE 1580 Type P
IEEE 1580 Type P
IEEE 1580 Type LSX
IEEE 1580 Type LSX-FS
IEEE 1580 Type E
UL® Type ITC/PLTC, UL®
Type MC-HL ABS CWCMC
Fire-Resistant Control and Instrumentation Cables
Medium-Voltage Power Generation and Distribution Cables
Armored Low-Voltage Power, Control, Instrumentation,
and Thermocouple Extension Cables and Medium-Voltage
Power Cables for Hazardous Locations
Drilling Rigs, MODUs, FPSOs
Production Platforms, FPSOs
RIGTUFF®
EXZHELLENT® 606
NEK-606 Mud Oil-Resistant
EXZHELLENT® — 92-3* (SectorFlex®
Conductor on 35mm and Larger for Reduced
Weight and Overall Cable Dimensions
IEEE 1580 Type X
IEC 60092-350
IEC 60092-350
Commodore® ABS Type Approved/ETL Verified
Category 5e, 6, and 7 Network Application Cables
Data Communication
Cables
Coaxial Cables
Industrial Control Cables
Commodore®
Fiber Optic
Communication Cables
Offshore Rigs, MODUs,
Commodore® Lite
Fiber Optic
Communication Cables
Standards-Compliant, Cost-Effective Data Transmission
and Communication Application Cables where High Levels
of Information Integrity and Security Are Prerequisites
ERVYLEC® Armored RVFV
Application-Specific
Cable Assemblies
Power, Control, and Instrumentation Cable Assemblies
Top Drive Power and Control
Service Loops
Control and Video Monitoring Application Cables RG-6/U,
RG-11U, RG-59/U, RG-213/U, RS422, and RS485
Closed and Open Architecture Cables Meeting Profibus,
Fieldbus, and DeviceNet protocols
Premium Performance Data Transmission and Communication
Application Cables where High Levels
of Information Integrity and Security Are Prerequisites
QUpstream Offshore Cable — Subsea Solutions
ROVs and winches exploring the deeper waters of larger reserves require specialized subsea cables.
General Cable's tailor-made solutions service this vital seabed infrastructure while meeting stringent industry requirements.
Product Type
Application
Location
Power Umbillicals
Components for Umbillicals
Unrepeatered Submarine Fiber
Repeatered Submarine Fiber
IEC 60502 SIPRELEC®
HVAC Power Supply
Control Cables
Fiber Optic Data Cables
Energy Cables
Data and Communication Cables
Data and Communication Cables
Medium- and High-Voltage Subsea Cables
Subsea Separation and Processing Technology
ROV Main Lift and Tether
Plough and Trencher
Air Gun and Electro-Mechanical
Platform Connection
Data Transmission over Long-Haul Distances
Subsea Separation and Processing Technology
QMidstream and Downstream Cable — LNG, Refining, and Petrochemical Solutions
LNG and refining systems are more complex than ever, and space is at a premium. Yet safety remains the number one priority, followed closely by uptime and
productivity. General Cable continues to diversify its product offering — instrumentation, power, and control cables — to help maintain the operational integrity of
LNG facilities, refineries, and petrochemical plants to ensure a lifetime of efficiency and throughput. This tested and proven line of industrial-grade, hazardous location
(CCW®) cables utilizes an extensive selection of application-specific compounds, including PVC, cross-linked polethylene, cross-linked polyolefin, ethylene propylene
rubber, low-smoke zero-halogen polyolefins, and thermoplastic elastomers.
Product Name
Product Type
Application
Location
CCW® Continuously
Corrugated Welded Cable
Duralox®
N/A
VNTC®
FREP®
ARCTIC-FLEX®
Uniblend®
ARMIGRON®
ERVYLEC® Armored RVFV
ERVYLEC® Armored RGPFV
UL® Type ITC/PLTC, UL® Type
CM-HL, ABS CWCMC
UL® Type MC
TECK90/HVTECK
UL® Type TC-ER
UL® Type TC-ER
UL® Type TC-ER
UL® Type MV-105
IEC 60502
IEC 60502
IEC 60502
LNG Facilities, Refineries, Petrochemical Plants
63
WESCO & GENERAL CABLE
Product Name
WIRE & CABLE
Performance Cables
Alpha Wire Xtra-Guard® 4 Advanced Temperature and Chemical Performance Cables
The preferred outdoor cable for extreme temperatures (-50° C to 125° C) and advanced chemical performance.
t Pennsylvania Bureau Deep Mining Safety approved for mine-wide monitoring systems
t Feature a high-performance TPE insulation and jacket offering three times the
low-temperature flexibility of ordinary PVC
t Resist oils, solvents, chemicals, and fuels
t Outstanding ultraviolet light stability in all nine jacket colors
t FIT Tubing recommendations: FIT-600 and FIT-400
Foil Shielded Pair Cable
WIRE & CABLE
Mfr.’s Model No.
Elements
t UL® rated TC 600V/WTTC 1000V, as well as PLTC 300V constructions available
for cable tray applications (except #24 AWG)
t Variety of shielding options available — when Supra-Shield is specified,
it provides exceptional protection against EMI
t Made to order, 1,000' minimum lengths
Foil/Braid Shielded Pair Cable
Mfr.’s Model No.
Elements
#24 AWG, 300V Rating, 7/32 Stranding (7 x 0.203mm), TPE Jacket
45491
1
45496
6
45492
2
45499
9
45493
3
45499/11
11
45494
4
45499/15
15
45495
5
45499/27
27
45481
1
45489
7
45482
2
45489/11
8
45483
3
45489/15
9
45484
4
45489/27
27
45485
5
45489/51
51
48456
6
45451
1
45459
9
45452
2
45459/11
11
45453
3
45459/15
15
45454
4
45459/19
19
45455
5
45459/27
27
45456
6
45371
1
45376
6
45372
2
45379
9
45373
3
45379/11
11
45374
4
45379/15
15
45375
5
45379/19
19
Also available in unshielded and foil shielded versions
Mfr.’s Model No.
Elements
Mfr.’s Model No.
Elements
45271
1
45279
9
45272
2
45279/11
11
45273
3
45279/15
15
45274
4
45279/19
19
45275
5
45279/27
27
45276
6
45121
1
45129
9
45122
2
45129/11
11
45123
3
45129/15
15
45124
4
45129/19
19
45125
5
45129/27
27
45126
6
45129/51
51
45291
1
45296
6
45292
2
45299
9
45293
3
45299/11
11
45294
4
45299/15
15
45295
5
45299/19
19
45131
1
45136
6
45132
2
45139
9
45133
3
45139/11
11
45134
4
45139/15
15
45135
5
Foil/Braid Shielded Multi-Conductor Cable
Mfr.’s Model No.
Elements
Mfr.’s Model No.
Elements
45112
2
45120
10
45113
3
45120/15
15
45114
4
45120/20
20
45116
6
45120/25
25
45118
8
45102
2
45110
10
45103
3
45110/15
15
45104
4
45110/19
19
45106
6
45110/20
20
45108
8
45110/25
25
45152
2
45160
10
45153
3
45160/15
15
45154
4
45160/20
20
45156
6
45160/25
25
45158
8
45162
2
45168
8
45162/1
2
45170
10
45163
3
45170/15
15
45163/1
3
45170/20
20
45164
4
45170/25
25
45166
6
45170/30
30
64
Mfr.’s Model No.
Elements
Mfr.’s Model No.
Elements
#18 AWG, 600/1000V Rating , 16/30 Stranding (16 x 0.254mm), TPE Jacket
45522
2
45527
7
45523
3
45529
9
45524
4
45529/12
12
45525
5
#16 AWG, 300V Rating, 19/0.0117 Stranding (19 x 0.297mm), TPE Jacket
45172
2
45178
8
45172/1
2
45180
10
45173
3
45180/15
15
45173/1
3
455180/20
20
45174
4
45180/25
25
45176
6
#16 AWG, 600/1000V Rating, 19/30 Stranding (16 x 0.297mm), TPE Jacket
45532
2
45537
7
45533
3
45539
9
45534
4
45539/12
12
45535
5
45542
2
45545
5
45543
3
45547
7
45544
4
45549
9
45552
2
Performance Cables, Industrial Cable
Alpha Wire Xtra-Guard® 4 Advanced Temperature
and Chemical Performance Cables (continued)
Unshielded Pair Cable
Mfr.’s Model No.
Elements
Mfr.’s Model No.
Elements
Alpha Wire Xtra-Guard® Industrial Ethernet Cables
The rugged advantages of Xtra-Guard 4 cable in Ethernet line cables for
beyond factory-tough applications.
t Abrasion-resistant
thermoplastic elastomer
jacket offers three times the
low-temperature flexibility
t Resist solvents, chemicals, fuels, and sunlight better than ordinary PVC
t Third-party verified performance
t CAT5e rated to ANSI/TIA-568-C.2
t Support data rates up to Gigabit Ethernet
t Pass UL® 1666 Riser and CSA FT-4 flame test
t Variety of shielding options available — when Supra-Shield is specified, it provides
exceptional protection against EMI
t FIT Tubing recommendations: FIT-600 and FIT-400
t Available in 500' and 1,000' put-ups
WESCO: Your source
for Wire & Cable…
Armored Cable, CCW,
Instrumentation and more!
WESCO’s knowledgeable and experienced staff recognizes
the needs of the mining and oil & gas industries and provides
cost-savings and efficient solutions to mining companies throughout
the world. Our understanding of local, national, and regional
regulations helps ensure the safety and protection of jobsites
and their neighboring communities.
When assembling the expansive list of items specified for a project,
consider the importance of the wire, cable, or connectivity required.
You want to ensure your needs are met quickly and accurately.
With WESCO, our strengths become yours — we offer industry
knowledge, competitive pricing, and a suite of value-added services:
t
t
t
t
Bundling
Cable Assembly
Cable Management Programs
Certificate of Compliance and
Test Reports
t Custom Manufactured Cables
t Custom Reports
t Cut to Length
t OEM/MRO Inventory
Management
t Paralleling
t Reel Tagging and Labeling
t Specification Assistance
t Striping
t Web-Based Bar Coding
WESCO offers wire & cable
from suppliers such as...
2-Pair Cable
Mfr.’s Model No.
Shielding
Insulation
75000
Unshielded
FEP
75001
Foil
FEP
75002
Foil/Braid
FEP
75010
Unshielded
PP
75011
Foil
PP
75012
Foil/Braid
PP
75020
Unshielded
PP
75021
Foil
PP
75022
Foil/Braid
PP
4-Pair Cable
Mfr.’s Model No.
Shielding
Insulation
76000
Unshielded
FEP
76001
Foil
FEP
76002
Foil/Braid
FEP
76010
Unshielded
PP
76011
Foil
PP
76012
Foil/Braid
PP
76020
Unshielded
PP
76021
Foil
PP
76022
Foil/Braid
PP
65
WIRE & CABLE
45269/27
27
45021
1
45029
9
45022
2
45029/11
11
45023
3
45029/15
15
45024
4
45029/19
19
45025
5
45029/27
27
45026
6
40529/51
51
45031
1
45032
2
WIRE & CABLE
WIRE & CABLE
Industrial Cable
Belden Industrial Data Solutions
DataTuff® Industrial Ethernet Cables
t Protection against solvents, oils, chemicals, sunlight,
and moisture
t Able to withstand pulling forces, abrasion, crushing,
cut-through, and burial
t Stability and performance during temperature extremes
Mfr.’s Model No.
t Available in 600V AWM, Weld-Splatter Resistance, Burial,
Low Smoke Zero Halogen (LSZH), PLTC, High Flex,
and MSHA Constructions
t Data Tuff Cordsets and Fiber Ethernet solutions are
also available
Description
DataTuff Cables, Category 5e
#24 AWG, Solid BC Conductors, Bonded Pairs, Polyolefin Insulation, PVC Outer Jacket
7923A EtherNet/IP
7939A
#24 AWG Stranded (7x32) BC Conductors, Bonded Pairs, Beldfoil® Shield, Polyolefin Insulation,
PVC Outer Jacket
11700A EtherNet/IP
#24 AWG, Solid BC Conductors, Bonded Pairs, Polyolefin Insulation, PVC Inner and Outer Jacket
7938A
#24 AWG Stranded (7x32) BC Alloy Conductors, Bonded Pairs, Beldfoil® Shield + 85% TC Braid,
Polyolefin Insulation, TPE Inner and Outer Jacket
DataTuff Cables, Category 6
7940A
#23 AWG Solid BC Conductors, Bonded Pairs, Polyolefin Insulation, PVC Outer Jacket
7931A
#23 AWG Solid BC Conductors, Bonded Pairs, Plenum, FEP Insulation and Outer Jacket
7953A
#23 AWG Solid BC Conductors, Bonded Pairs, Beldfoil® Shield, Polyolefin Insulation,
FRPO Inner Jacket, PVC Outer Jacket
WIRE & CABLE
™
™
11700A
Pairs/Shielding
Features
4-Pair UTP
4-Pair STP
CMX-Outdoor, MSHA
CMX-Outdoor
4-Pair UTP
4-Pair STP
CMX-Outdoor, MSHA, High-flex
Weldsplatter-Resistant, High-flex
4-Pair UTP
4-Pair UTP
4-Pair STP
CMX-Outdoor
Gasoline Resistant, MSHA
CMX-Outdoor
NOTE: EtherNet/IP is a trademark of ControlNet International, Ltd. under license by Open DeviceNet Vendor Association, Inc.
BC = Bare Copper; TC = Tinned Copper
TrayOptic® Optical Fiber Cables
Laser optimized fiber to handle Gigabit Ethernet light sources and expanded bandwidth
requirements. Passes IEEE 1202/583-2003 flame test. Waterblocking agent for moisture protection.
CPE outer jacket option provides extra chemical or abrasion resistance.
t Applicable in industrial, factory automation, and
direct burial environments
t PVC or CPE Jacket
t Jacket colors include single-mode Yellow,
62.5/125 μm Orange, 50/125 μm / 1 Gb Orange, and
50/125 μm / 10 Gb Aqua
t UL® Type OFNR; cUL Type OFN FT.4
t
t
t
t
t
IEEE 1202 / 383-2003 Flame Resistance
TIA/EIA-568-C.3; ICEA S-104-696 Compliance
Storage and Operating Temperatures -40 to +70°C
25 cycles, 12 lbs., (EIA-455-104) 20 x OD radius min.
Installation 20 x OD; Long Term 15 x OD
minimum bend radius
t Load 600 lbs. (2700 N) maximum installation
Mfr.’s Model No.
TrayOptic
I601255
I601266
I602455
I602466
I6E1255
I6E1266
I6E2455
I6E2466
I6W1255
I6W2455
I6W2466
Fiber Type
Fiber Count
Jacket
OM1
OM1
OM1
OM1
OM4
OM4
OM4
OM4
Single-Mode
Single-Mode
Single-Mode
12
12
24
24
12
12
24
24
12
24
24
PVC
CPE
PVC
CPE
PVC
CPE
PVC
CPE
PVC
PVC
CPE
FOUNDATION™ Fieldbus
Fieldbus Type A and Type B cables provide installation flexibility in many different
environments, including outdoors, and where multiple or extended cable runs are required.
Belden Fieldbus cable features include:
t Compliant with Fieldbus Spec IEC 61158-2 (ISA/SP-50)
t Excellent electrical characteristics
t Low capacitance (for long runs)
t Types of Versions Available:
- #14,#16,#18, and #22 AWG stranded tinned copper conductors
- Beldfoil® shields and Beldfoil® Plus Braid shields
- PLTC/ITC-ER, PLTC, and TC-ER
Mfr.’s Model No.
t Multi-pair cables available in 2 to 24 pairs in 300V LSZH or 600V designs as standard constructions.
Also available in 50 pair designs as quote to order.
t Easily identifiable orange jacket; blue jacket option for intrinsically safe applications
t Suitable for use in Class 1, Div. 2 applications
t RoHS compliant and CE approved
3076F-3078F
Description
#18 AWG Stranded (7 x 26) Tinned Copper Conductors, Polyolefin Insulation, PVC Jacket, Type A
3076F
Beldfoil® Shield (100% coverage), TC Drain Wire
#16 AWG Stranded (7 x 24) Tinned Copper Conductors, Polyolefin Insulation, PVC Jacket, Type A
1335A
Beldfoil® Shield (100% coverage), TC Braid Shield (65% coverage), TC Drain Wire
Twisted Pairs
Resistance
1
Oil, Sunlight
1
Oil, Sunlight
TC = Tinned Copper
PLTC-Rated RS-485
t Commonly used in Hart applications
t #22 AWG stranded (7 x 30) tinned copper
conductors, Datalene® insulation, overall
Beldfoil® shield (100% coverage) plus a tinned
copper braid (65% coverage), and drain wire
66
Mfr.’s Model No.
3105A
3106A
3107A
Diameter
Pair
Twisted RS-485
UL® Type
0.281"
0.300"
0.350"
1
1
1
Yes
Yes
Yes
UL 1685 UL Loading
UL 1685 UL Loading
UL 1685 UL Loading
3105A-3107A
Industrial Cable
WIRE & CABLE
Belden Classics VFD Cables
Belden offers the most extensive line of VFD cables from
#16 AWG to 500 MCM in various design styles.
Mfr.’s Model No.
Description
Stranding
t Suitable for Class I, II, and III, Div. 2 hazardous locations and
rated for UL® 1685 Vertical Tray Flame Test
t Suitable for direct-burial applications
t Oil- and sunlight-resistant PVC jacket
t Several designs available including 2000V, LSZH, and Armored
t Applicable for use with all major drive manufacturers
t ER rating allows for the elimination of conduit,
for easier and less expensive installations
t Continuous or interlocked armoring available in steel
and aluminum designs
t XLP insulation on MCM VFD provides high dielectric
and low capacitance
Belden Classics 300V and 600V Instrumentation Cables
Reliability, even in the harshest of environments, is the hallmark of Belden Instrumentation and Control Cables.
No matter what type of insulation, conductor count, gauge size, jacket, armor, or rating Belden can meet your needs.
Mfr.’s Model No.
1018A
t Multiple pairs or triad cables have each pair/triad
numbered for ease of identification
t Direct burial rated
t Other options available:
- Multiple armoring and jacketing
- Armored and MC-rated products (as specials)
- Thermocouple extensions and wire
Color
300V, PVC Jacket
1030A
Black
1032A
Black
1035A
Black
1033A
Black
1018A
Yellow
600V, PVC Jacket
1118A
Black
1119A
Black
1120A
Black
3088A
Black
3090A
Black
Conductors
Insulation
Shield
UL® Rating
PVC
PVC
PVC
PVC
PVC
Outer
Outer
—
Outer
Outer
PLTC
PLTC
PLTC
PLTC
PLTC
PVC/Nylon
PVC/Nylon
PVC/Nylon
PVC/Nylon
PVC/Nylon
Outer
Outer
Outer
Outer
Outer
TC
TC
TC
TC
TC
1 Pair, #16 AWG Bare Copper Conductors
1 Pair, #16 AWG Type KX Copper Conductors
1 Triad, #16 AWG Bare Copper Conductors
Belden Continuous Aluminum Armor
Robust protection from crushing and impact, fluid ingress, and suitable for hazardous locations as appropriate
Features include:
Standard cables available with Continuous Aluminum Armor include:
Additional Types of Armor Available:
t
t
t
t
t
t
t
t
t Aluminum interlocked armor
t Galvanized steel interlocked armor
t Continuously corrugated armor
Excellent crush and impact protection
Superior fluid ingress protection
Suitable for hazardous locations as appropriate upon request
Ease of installation vs. conduit
FOUNDATION™ Fieldbus/PROFIBUS PA (183076F)
PROFIBUS DP (183079A)
ControlNet® Quad Shielded Coaz (183092A)
Blue Hose® Cable (189463)
Belden’s Continuous Aluminum Armor can be ordered for any of the company’s standard or special cable constructions, including, instrumentation, control, VFD, and
industrial communication & networking products.
67
WIRE & CABLE
(3) Stranded Tinned Copper Conductors with (1) Full-sized Insulated Ground Wire,
Overall Duofoil + 85% TC Braid Shield, XLPE Insulation, PVC Jacket, MSHA Approval
29500
#16 AWG
26 x 30
29501
#14 AWG
41 x 30
29502
#12 AWG
65 x 30
29503
#10 AWG
105 x 30
29504
#8 AWG
7 x 19 x 29
29505
#6 AWG
7 x 19 x 27
29506
#4 AWG
7 x 19 x 25
29507
#2 AWG
7 x 19 x 23
(3) Stranded Tinned Copper Circuit Conductors with (3) Symmetrical Bare Copper Ground Wires,
(2) Spiral Copper Tape Shields (100% coverage), XLPE Insulation, PVC Jacket, MSHA Approval
29528
#1 AWG
7 x 19 x 22
29529
#1/0 AWG
7 x 19 x 21
29530
#2/0 AWG
7 x 19 x 20
29531
#3/0 AWG
19 x 7 x 19
29532
#4/0 AWG
19 x 7 x 18
(3) Stranded Bare Conductors, (3) Symmetrical Bare Copper Ground Wires, (2) Spiral Copper Tape
Shields (100% Coverage), XLP Insulation, Black Sunlight and Oil-Resistant PVC Jacket
29533
250 MCM
37 x .0822
29534
350 MCM
37 x .0973
29535
500 MCM
37 x .1162
WIRE & CABLE
Tray Cables, Conductors
Encore Wire Corporation Tray Cable, Control
or Instrumentation, Shielded, THHN or XHHW
Inner Conductors — 600V
Encore Wire Corporation Bare Stranded
Copper Conductors
172101600298
WIRE & CABLE
115290501098
t UL® 1277; UL 83; UL 44
t Suitable for connecting power
devices in industrial environments
and installation in channels, ducts,
wireways, cable trays, and conduits;
suitable for direct burial
t Thermoplastic (THHN) or thermoset
(XHHW) insulation on inner
conductors not to exceed 90°C wet or
dry; thermoplastic sunlight-resistant
outer jacket
t Available in 14 AWG through 750
kcmil, with or without green insulated
or bare ground
t Listed as Type TC-ER
t Cable tray rated according to FT4/IEEE
1202 (70,000 btu/hr) flame test
t ICEA T-29-520 (210,000 btu/hr)
flame rated
t Class I Division 2 hazardous locations
t 14 AWG through 10 AWG: ICEA Method
1 with Printed Number Color Code; 8
AWG and larger sizes: ICEA Method 4
with Printed Number Color Code
Mfr.’s Model No.
UPC#
Description
115290501098
115490501098
739373785091
739373780249
18/2 TFFN Shield Tray Cable
18/4 TFFN Shield Tray Cable
t
t
t
t
t
t
t
Soft-Drawn annealed copper per ASTM B3, B8, and B787
Highest conductivity per unit area of all common commercial metals
Excellent corrosion resistance
Flexible; easily worked and formed into place
Packaged on non-returnable spools for easy transporation
Good fatigue resistance; not subject to nicks or cuts when terminating
Completely recyclable with high scrap value
Mfr.’s Model No.
UPC#
Description
172101600298
172101900498
172102100498
739373702753
739373014795
739373702791
2-7 Strands Bare Copper
2/0 19 Strands Bare Copper
4/0-19 Strands Bare Copper
NOTE: Footage Markers available on all insulated single conductors listed above in the following
configurations: a.) Regular sequential footage markers available on 1 AWG through 4/0 AWG, 2500
ft. and 5000 ft. reels only. b.) Regular sequential footage markers available on 250 kcmil through
1000 kcmil, 500 ft. reels and 1000 ft. reels. c.) Encore SmartCount® footage markers available on
250 kcmil through 1000 kcmil, 2500 ft. and 5000 ft. reels. NOTE: Custom striping available on all
insulated single conductors listed above.
Encore Wire Corporation XHHW-2/RW90 —
600V Copper Conductor
Encore Wire Corporation Tray Cable, Power &
Control, THHN or XHHW Inner Conductors — 600V
940102007498
115311201098
t UL® 1277; UL 83; UL 44
t Suitable for connecting power
devices in industrial environments
and installation in channels, ducts,
wireways, cable trays, and conduits;
suitable for direct burial
conductors not to exceed 90°C wet or
dry; thermoplastic sunlight-resistant
outer jacket
t Available in 14 AWG through 750
kcmil, with or without green insulated
or bare ground
t Listed as Type TC-ER
t ICEA T-29-520 (210,000 btu/hr) flame
rated
t Class I Division 2 hazardous locations
t 14 AWG through 10 AWG: ICEA Method
1 with Printed Number Color Code; 8
AWG and larger sizes: ICEA Method 4
with Printed Number Color Code
Mfr.’s Model No.
UPC#
Description
115311201098
115331401098
115331601098
739373706805
739373787880
739373894915
6/3 #8 GG THHN Tray Cable
t
t
t
t
t
UL® 44
Fire-resistant thermoset (XLPE) insulation for wet or dry location not to exceed 90°C
Available in SuperSlick Elite® in sizes 8 AWG through 1000 kcmil
6 AWG and larger rated Sunlight-Resistant
1/0 AWG and larger UL rated for cable tray use per FT4/IEEE 1202
(70,000 btu/hr) flame test
t 1/0 AWG and larger rated to ICEA T-29-520
(210,000 btu/hr) flame test
Mfr.’s Model No.
UPC#
Description
940102007498
940103507598
940105007598
140102001498
140102008498
140102005498
140102007498
140102006498
140103501598
140103508598
140103505598
140103507598
140103506598
140105001598
140105008598
140105005598
140105007598
140105006598
739373826923
739373828729
739373829528
739373706355
739373719430
739373706393
739373719423
739373719416
739373706478
739373717733
739373722713
739373719775
739373717726
739373706492
739373718105
739373720641
739373718099
739373718082
SSE 3/0 Strands XHHW-2, Orange
SSE 350 kcmil XHHW-2, Orange
SSE 500 kcmil XHHW-2, Orange
3/0 Strands XHHW-2, Black
3/0 Strands XHHW-2, Brown
3/0 Strands XHHW-2, Green
3/0 Strands XHHW-2, Orange
3/0 Strands XHHW-2, Yellow
350 kcmil XHHW-2, Black
350 kcmil XHHW-2, Brown
350 kcmil XHHW-2, Green
350 kcmil XHHW-2, Orange
350 kcmil XHHW-2, Yellow
500 kcmil XHHW-2, Black
500 kcmil XHHW-2, Brown
500 kcmil XHHW-2, Green
500 kcmil XHHW-2, Orange
500 kcmil XHHW-2, Yellow
68
Conductors
Encore Wire Corporation THHN/THWN-2 —
600V Copper Conductor — SuperSlick
Encore Wire Corporation USE-2/RHH/RHW-2 —
118102003498
t 1/0 AWG and larger UL rated for cable
tray use per FT4/IEEE 1202 (70,000
btu/hr) flame test
t 1/0 AWG and larger rated to ICEA
T-29-520 (210,000 btu/hr) flame test
t Rated VW-1
t All sizes rated gas and oil resistant II
Mfr.’s Model No.
UPC#
Description
118102003498
118103503598
118105003598
118102001498
118102008498
118102005498
118102007498
118102006498
118103501598
118103508598
118103505598
118103507598
118103506598
118105001598
118105008598
118105005598
118105007598
118105006598
739373754448
739373757142
739373758323
739373754325
739373754776
739373754561
739373754707
739373754639
739373757043
739373757395
739373757241
739373757340
739373757296
739373758224
739373758576
739373758422
739373758521
739373758477
3/0 Strands THWN-2, Red
350 kcmil THWN-2, Red
500 kcmil THWN-2, Red
3/0 Strands THWN-2, Black
3/0 Strands THWN-2, Brown
3/0 Strands THWN-2, Green
3/0 Strands THWN-2, Orange
3/0 Strands THWN-2, Yellow
350 kcmil THWN-2, Black
350 kcmil THWN-2, Brown
350 kcmil THWN-2, Green
350 kcmil THWN-2, Orange
350 kcmil THWN-2, Yellow
500 kcmil THWN-2, Black
500 kcmil THWN-2, Brown
500 kcmil THWN-2, Green
500 kcmil THWN-2, Orange
500 kcmil THWN-2, Yellow
Encore Wire Corporation THW-2 —
945102006498
t UL® 854; UL 44
t Fire resistant thermoset (XLPE)
insulation for wet or dry locations not
to exceed 90°C
t 1/0 AWG and larger rated for cable tray
use per FT4/IEEE 1202 (70,000 btu/hr)
flame test
Mfr.’s Model No.
UPC#
Description
945102006498
945103506598
945105006598
145102006498
145103506598
145105006598
145102001498
145102008498
145102005498
145102007498
145102006498
145103501598
145103508598
145103507598
145103506598
145105001598
145105008598
145105005598
145105007598
145105006598
739373835604
739373837820
739373838780
739373086167
739373083081
739373083968
739373704634
739373086266
739373704672
739373086211
739373086167
739373704757
739373083166
739373083128
739373083081
739373704771
739373084040
739373083920
739373084002
739373083968
SSE 3/0 Strands USE-2, Yellow
SSE 350 kcmil USE-2, Yellow
SSE 500 kcmil USE-2, Yellow
3/0 Strands USE-2, Yellow
350 kcmil USE-2, Yellow
3/0 Strands USE-2, Black
3/0 Strands USE-2, Brown
3/0 Strands USE-2, Green
3/0 Strands USE-2, Orange
3/0 Strands USE-2, Yellow
350 kcmil USE-2, Black
350 kcmil USE-2, Brown
350 kcmil USE-2, Orange
500 kcmil USE-2, Black
500 kcmil USE-2, Brown
500 kcmil USE-2, Green
500 kcmil USE-2, Orange
Encore Wire Corporation TW-#8 Solid Green
107101005098
109101608298
t Heat, moisture, and flame resistant
thermoplastic insulation per UL® 83
not to exceed 90°C, wet or dry
t 1/0 AWG and larger UL rated for cable
tray use per FT4/IEEE 1202 (70,000
btu/hr) flame test
t 1/0 AWG and larger rated to ICEA
t 6 AWG and larger rated
Sunlight-Resistant
t Rated VW-1
Mfr.’s Model No.
UPC#
Description
109101608298
109101408298
109101208298
109101401298
109101201298
109101601298
739373737397
739373736826
739373737458
739373729095
739373729637
739373729675
2-7 Strands THW-2 Brown
4-7 Strands THW-2 Black
t 1/0 AWG and larger rated for ICEA
when used as RHH/RHW-2
t Suitable for direct burial per NEC
t 6 AWG and larger rated
Sunlight-Resistant
WIRE & CABLE
t UL 83; UL 1063; UL 1685
t Tough nylon jacket over thermoplastic
insulation per UL 83
t Slick outer jacket for easy pulling
t Available in SuperSlick Elite® in sizes
8 AWG through 1000 kcmil — a great
alternative that eliminates the need
for lube
t 6 AWG and larger rated Sunlight
Resistant
®
WIRE & CABLE
t Heat-, moisture-, and flame-resistant
thermoplastic insulation per UL® 83
not to exceed 75°C, wet or dry
t 8 AWG solid Soft Drawn annealed
copper conductor with .045” of green
PVC insulation
t Suitable and sometimes preferred for
grounding systems per NEC
t May be used in conduit or other
recognized raceways
t Rated VW-1
Mfr.’s Model No.
UPC#
Description
107101005098
739373702111
8 SOL Green TW
69
WIRE & CABLE
Conductors
Encore Wire Corporation Tracer Wire
Copper Conductor — 30V or 600V
Encore Wire Corporation Striped Wire
506000900265
158100704265
WIRE & CABLE
t UL® 83; UL 1493
t HMWPE insulation for moisture,
chemical, oil, crush, and abrasion
resistance not to exceed 90°C wet or
dry
t 30-Volt has 30 mil insulation wall,
600-Volt has 45 mil insulation wall
t Rated VW-1
t Available in sizes 14 AWG through 8
AWG, solid or stranded constructions
t Suitable for direct burial
t Color coded according to American
Public Works Administration Uniform
Color Code
Mfr.’s Model No.
UPC#
Description
158100704265
159100704265
158100804265
159100804265
739373903105
739373903402
739373903204
739373903501
14-7 Strands 30V Tracer Wire Blue 2500' RL
Encore Wire Corporation TFFN/TFN —
106100505498
t UL® 62; UL 66; UL 758; UL 1063; UL 83
t Heat, moisture, and flame-resistant
thermoplastic insulation rated 90°C
dry, or 60°C wet, or where exposed to
oil or coolants
t Suitable for Appliance Wire
installations up to 105°C dry
t Available in 16 AWG and 18 AWG, solid
and stranded constructions
t Rated VW-1
Mfr.’s Model No.
UPC#
Description
106100505498
106100605498
105100505098
105100605098
106100501498
106100601498
105100501098
105100601098
739373702401
739373702524
739373702166
739373702289
739373702364
739373702487
739373702128
739373702241
18 Strands TFFN Green
16 Strands TFFN Green
18 SOL TFN Green
16 SOL TFN Green
18 Strands TFFN Black
16 Strands TFFN Black
18 SOL TFN Black
16 SOL TFN Black
70
t Available on any single conductor wire type
Mfr.’s Model No.
UPC#
Description
506000900265
506000800265
506000700265
739373736635
739373767202
739373903846
10 Strands THHN WE/RD Stripe
Encore Wire Corporation MC Cable with PVC Jacket
— THHN or XHHW Inner Conductors — 600V
t UL® 1569; UL 83; UL 44
conductors not to exceed 90°C
t Interlocked aluminum or steel armor
t Thermoplastic sunlight-resistant outer
jacket suitable for direct burial or to be
encased in concrete
t Available in 14 AWG through 750 kcmil
t 14 AWG through 1 AWG: insulated
green ground — larger sizes contain
bare ground
t ICEA T-29-520 (210,000 btu/hr)
flame rated
t Class I Division 2; Class II Division
2; and Class III Division 3 hazardous
locations
t Listed for UL 1, 2, 3 hour throughpenetration firestop systems
Mfr.’s Model No.
UPC#
Description
767311229498
769311229498
767311429498
769311429498
767311629498
769311629498
739373771629
739373810830
739373771636
739373913708
739373776723
739373810847
MC-AL-PVC 6/3 G Strands BK/WE/RD
MC-AL-PVC 6/3 G Strands XHHW-2 BK/WE/RD
Cable Ties
WIRE & CABLE
Thomas & Betts Ty-Rap® Heavy-Duty Stainless Steel Ball-Lock Cable Ties
Engineered to withstand the harshest environments.
t One-piece stainless steel construction
t Self-locking — no time-consuming crimping or folding required
t Stainless steel ball in low-profile, wedge-shaped head locks tie
securely in place
t Rounded edges and smooth surfaces protect installer’s hands
t Applications include offshore drilling, petrochemical
processing, shipbuilding, food and beverage processing,
and pharmaceutical processing
t Angled tail enables fast, easy insertion
t 302/304 grade stainless steel — for standard applications
t 316 grade (marine-grade) stainless steel —
for extra corrosion resistance
t 316 grade (marine-grade) stainless steel, fully coated with
low-smoke, halogen-free polyester — for withstanding
continuous exposure to salt spray, sunlight, petroleum,
and chemicals
LS-4.6-200B
LS-7.9-360C
Description
LS-7.9-360A
LS-7.9-520A
LS-4.6-200B
LS-4.6-360B
LS-7.9-200B
LS-7.9-520B
LS-4.6-200-C
LS-4.6-360-C
LS-7.9-360-C
LS-7.9-520-C
Uncoated 302/304 Grade Stainless Steel; Operating Temp. Range: Uncoated — -112 to 1000° F (-80 to 538° C), 4" Max. Bundle Dia.
Uncoated 302/304 Grade Stainless Steel; Operating Temp. Range: Uncoated — -112 to 1000° F (-80 to 538° C), 6" Max. Bundle Dia.
Uncoated 316 Grade Stainless Steel; Operating Temp. Range: Uncoated — -112 to 1000° F (-80 to 538° C), 2" Max. Bundle Dia.
Fully Coated 316 Grade Stainless Steel; Operating Temp. Range: Coated — -112 to 1000° F (-80 to 538° C), 2" Max. Bundle Dia.
WIRE & CABLE
Mfr.’s Model No.
Approvals/Standards: UL®, CE, Lloyd’s Register, Germanischer Lloyd, American Bureau of Shipbuilding, Det Norske Veritas, RoHS Compliant.
Thomas & Betts Ty-Rap® Nylon 6.6 —
UV- and Weather- Resistant Cable Ties
Thomas & Betts Ty-Rap® Nylon 6.6 Cable Ties
Durable, cost-effective bundling solutions designed to be used in
special applications and in harsh environmental conditions.
t Smooth, low-profile design
t Oval head
t Quicker to install and less expensive
than metallic fasteners, lacing cord,
or tape
TY523M
t Nylon construction
t UV rate, black
t Temperature rating: -40° F to 185° F
(-40° C to 85° C)
t UL® Recognized
Description
TY5232MX
TY232MX
TY526MX
TY26MX
TY525MX
TY25MX
TY528MX
TY28MX
TY527MX
TY27MX
TY5275MX
TY275MX
TY529MX
TY29MX
8.00"L, 18-lb. Tensile Strength, 100 STD Pkg. Qty
8.00"L, 18-lb. Tensile Strength, 1,000 BULK Pkg. Qty
13.40"L, 120-lb. Tensile Strength, 500 BULK Pkg. Qty
t Convenient way to
mount wire bundles
at cross-over points
3.62"L, 0.09"W, 100 STD Pkg. Qty
3.62"L, 0.09"W, 1,000 BULK Pkg. Qty
7.31"L, 0.19"W, 100 STD Pkg. Qty
7.31"L, 0.19"W, 1,000 BULK Pkg. Qty
14.20"L, 0.19"W, 100 STD Pkg. Qty
14.20"L, 0.19"W, 1,000 BULK Pkg. Qty
t Corrosion-resistant, providing a safe, strong, worry-free hold
t Unique, self-locking, multiple-locking system holds in excess of 200lbs.
t Manufactured from Type 316 stainless steel
Mfr.’s Model No.
Description
TYS12-280
TYS18-280
TYS9-280C
TYS24-280C
TYS12-470C
TYS18-470C
TYS24-470C
12"L, 0.28"W, Single Wrap only
Thomas & Betts Ty-Rap® Two-Way
Adhesive Mounting Bases
TC5345A
Mfr.’s Model No.
Description
TC5345A
4-Way Tie-Entry, 0.19" Tie Width Max, 100 Pkg. Qty, Adhesive
Back and (4) #8 AWG Screw Holes
4-Way Tie-Entry, 0.19" Tie Width Max, 100 Pkg. Qty, Adhesive
Back and (4) #8 AWG Screw Holes
TC345A
TY523M
TY23M
TY525M
TY25
TY528M
TY28M
TYS18-280
Thomas & Betts Ty-Rap® Four-Way
Adhesive Mounting Bases
t Indoor/outdoor use
t One-piece molding
t Adhesive-backed
Description
Thomas & Betts Ty-Rap® Multi-Lok Stainless Steel
Nylon Coated Cable Ties
TY5232MX
Mfr.’s Model No.
Mfr.’s Model No.
t Indoor/outdoor use
t One-piece molding
t Adhesive-backed
TC5342A
Mfr.’s Model No.
Description
TC5342A
TC342A
2-Way Tie-Entry, 0.19" Tie Width Max, 100 Pkg. Qty
2-Way Tie-Entry, 0.19" Tie Width Max, 100 Pkg. Qty
71
WIRE & CABLE
Tubing & Harnessing
TE Connectivity FCSM Heat-Shrink Flame
Retardant Heavy Wall Tubing
TE Connectivity HV-MSK Heat-Shrink
Multi-Conductor Splice
Raychem FCSM heat-shrink
tubing is a tough electrical
insulating material, which
combines flame-retardant
properties with flexibility,
abrasion resistance, and a
rapid installation technique.
HV-MSK kits are flame
retardant; multiconductor splice kits
for use on standard
flexible cables and
mining cables (MP-GC
and SHD-GC) up to
8kV. LV-MSK kits are
flame retardant; in-line
and multi-conductor
splice kits for use on
mining cables and
standard flexible
cables up to 2kV.
WIRE & CABLE
t Rugged mechanical protection
t Watertight seals
t Superior electrical insulation
FCSM
Mfr.’s Model No.
Description
FCSM-9/3-1200-S
FCSM-19/6-150-S
FCSM-19/6-1200-S
FCSM-28/9-225-S
FCSM-28/9-1200-S
FCSM-38/12-300-S
FCSM-38/12-1200-S
FCSM-51/16-300-S
FCSM-51/16-1200-S
FCSM-68/22-1200-S
FCSM-90/30-1200-S
FCSM-120/40-1200-S
FCSM-177/63 600-S
FCSM-177/63-1200-S
#14 – #8 0.15 – 0.30 (4 – 8) 48 (1200) 25
#6 – #2 0.25 – 0.65 (6 – 17) 6 (150) 50
#6 – #2 0.25 – 0.65 (6 – 17) 48 (1200) 25
#2 – 4/0 0.40 – 0.95 (10 – 24) 9 (225) 50
#2 – 4/0 0.40 – 0.95 (10 – 24) 48 (1200) 25
1/0 – 350 0.50 – 1.30 (13 – 33) 12 (300) 40
1/0 – 350 0.50 – 1.30 (13 – 33) 48 (1200) 10
250 – 500 0.70 – 1.75 (18 – 44) 12 (300) 30
250 – 500 0.70 – 1.75 (18 – 44) 48 (1200) 10
600 –1000 0.95 – 2.30 (25 – 58) 48 (1200) 10
800 –1200 1.30 – 3.10 (33 – 79) 48 (1200) 5
1500 –2500 1.75 – 4.10 (44 – 104) 48 (1200) 5
2.75 – 6.05 (70 – 154) 24 (600) 6
2.75 – 6.05 (70 – 154) 48 (1200) 5
t MSHA approved to P-137-4-MSHA. For types G, W, G-GC,
and SHD-GC round and flat cables
t MSHA approved for P-137-MSHA
Mfr.’s Model No.
Description
LV-MSK-046
LV-MSK-047
(600 V-2kV) - Flat Cable 0.85–1.40 (22–36) #6–#2 15
(600 V-2kV) - Flat Cable 1.30–2.40 (33–61) #6–#1 #1–4/0
#6–#1 10
(600 V-2kV) - Flat Cable 1.60–3.15 (41–80) #2–4/0 #2–4/0 5
Round Cable 0.85–1.40 (22–36) #8–#6 #8–#6 20 /
LV-MSK-045 Has a Lower Profile than LV-MSK-046
Round Cable 0.85–1.40 (22–36) #6–#2 #6–#4 15
Round Cable 1.30–2.40 (33–61) #2–3/0 #3–3/0 #6–1/0 10
Round Cable 1.60–3.15 (41–80) 2/0–500 2/0–350 1/0–350 5
For 3/C Flexible Cable (5-8 kV) #6–#1 #6–#4 #6–#4 22
For 3/C Flexible Cable 1/0–350 #2–3/0 #2–4/0 #4–2/0 22
For 3/C Flexible Cable 400–750 4/0–350 250–750
3/0–350 29
LV-MSK-058
LV-MSK-045
LV-MSK-046
LV-MSK-047
LV-MSK-058
HV-MSK-3/C-581
HV-MSK-3/C-582
HV-MSK-3/C-584
TE Connectivity MRS Mining Repair Sleeve
MRS wraparound mining repair
sleeve provides an efficient
method of fixing insulation on
flexible cables to 2kV and jacket
damage on high-voltage cable
where a splice is not required.
t Specially formulated, flame
retardant, flexible wraparound
sleeve installs with a low profile
quickly and easily
t Rugged mechanical protection
t Watertight seals
t Superior electrical insulation
Mfr.’s Model No.
Description
MRS-12-10
MRS-12-24
MRS-34-24
MRS-34-30
MRS-56-30
1.00 – 1.60 (25 – 41) 10 (254) 20
1.00 – 1.60 (25 – 41) 24 (610) 10
1.60 – 2.30 (41 – 58) 24 (610) 10
1.60 – 2.30 (41 – 58) 30 (762) 10
2.30 – 3.50 (58 – 89) 30 (762) 10
72
LV-MSK
TE Connectivity CRPS Flame Retardant
Cold Applied Repair Strip
This tool-free, flexible, flame
retardant elastomeric strip has
been specially formulated to
provide excellent resistance to
abrasion, tearing, and cutting.
MRS
t
t
t
t
Rugged mechanical protection
Watertight seals
Superior electrical insulation
High-quality replacement jacket
for low-and high-voltage flexible
mining cables
Mfr.’s Model No.
Description
CRPS-248
CRPS-260
CRPS-290
CRPS-2120
48 (1219) 2 (51) 20
60 (1524) 2 (51) 20
90 (2286) 2 (51) 15
120 (3048) 2 (51) 10
CRPS
Wiring Devices
In This Section
Pin & Sleeve Devices ................74–75
Plugs & Receptacles ..........75–76, 80
Plugs & Connectors..................77–80
Outlet Boxes ................................. 81
In-Line Cords ................................ 81
Switches ....................................... 82
Control Stations ............................. 82
This is a
sampling of the
Wiring Devices that
WESCO offers.
73
73
WIRING DEVICES
Pin & Sleeve Devices
Appleton® Powertite® Pin and Sleeve Devices
Designed to supply power to fixed or portable electrical equipment.
t
t
t
t
t
t
t
t
Suitable where weatherproof enclosure is required
Floating plug terminal self-aligns to receptacle contacts
Locking screw and slot prevent cable collar from “backing off”
Positive polarization prevents mismatching plugs and connectors
Copper-free aluminum construction with epoxy powder-coat finish
Standard shell grounding or shell plus extra pole
Rated 600 VAC/250 VDC
Meet UL® 1682, 1686, 50E and CSA C22.2 No. 182.1
ARC1034CD
ADR1034
WIRING DEVICES
ACP3033BC
ADR6034
AR20034
ARC3023BC
ARC6033BC
ARC20044E
AP20034CD
AR40034RS
Mfr.’s Model No.
Description
ACP3033BC
ACP3034BC
ARC3023BC
ARC3034BC
ACP6033BC
ACP6034BC
ACP6044BC
ARC6033BC
ARC6034BC
ARC6044BC
ACP1033CD
ACP1034CD
ACP1044CD
ARC1034CD
AP20034CD
AP20044CD
AP20044E
AP20033E-RS
AP20034E-RS
AP20044E-RS
ARC20044E
AP40134G
AP20044CD-RS
AP40144G-RS
AP40044E
ADR3034
ADR6033
ADR6034
ADR6044
ADR1033
ADR1034
ADR1044
AR20034
ADR20044
AR20044
AR20033-RS
AR20034-RS
ADR20044RS
AR40034RS
30A Plugs; 3 Wires, 3 Poles, Style 1 Grounding (shell only), 0.390–1.375" Cable O.D. Min.-Max.
30A Plugs; 3 Wires, 4 Poles, Style 2 Grounding (shell and extra pole), 0.390–1.375" Cable O.D. Min.-Max.
30A Connectors; 2 Wires, 3 Poles, Style 2 Grounding (shell and extra pole), 0.390–1.375" Cable O.D. Min.-Max.
30A Connectors; 3 Wires, 4 Poles, Style 2 Grounding (shell and extra pole), 0.390–1.375" Cable O.D. Min.-Max.
60A Connector; 3 Wires, 3 Poles, Style 1 Grounding (shell only), 0.360–1.375" Cable O.D. Min.-Max.
60A Connector; 3 Wires, 4 Poles, Style 2 Grounding (shell and extra pole), 0.390–1.375" Cable O.D. Min.-Max.
100A Connector; 3 Wires, 4 Poles, Style 2 Grounding (shell and extra pole), 0.875–1.906" Cable O.D. Min.-Max.
200A Reverse Service Outlets; 3 Wires, 3 Poles, Style 1 Grounding (shell only), 1.875–2.500" Cable O.D. Min.-Max.
200A Reverse Service Outlets; 3 Wires, 4 Poles, Style 2 Grounding (shell and extra pole), 1.875–2.500" Cable O.D. Min.-Max.
200A Reverse Service Outlets; 4 Wires, 4 Poles, Style 1 Grounding (shell only), 1.875–2.500" Cable O.D. Min.-Max.
30A Receptacle; 3 Wires, 4 Poles, Style 2 Grounding (shell and extra pole), Spring Cable O.D. Min.-Max.
60A Receptacles; 3 Wires, 3 Poles, Style 1 Grounding (shell only), Spring Cable O.D. Min.-Max.
60A Receptacles; 3 Wires, 4 Poles, Style 2 Grounding (shell and extra pole), Spring Cable O.D. Min.-Max.
100A Receptacles; 3 Wires, 4 Poles, Style 2 Grounding (shell and extra pole), Spring Cable O.D. Min.-Max.
200A Receptacles; 3 Wires, 4 Poles, Style 2 Grounding (shell and extra pole), Clamp-On Cable O.D. Min.-Max.
200A Receptacles; 4 Wires, 4 Poles, Style 1 Grounding (shell only), Clamp-On Cable O.D. Min.-Max.
200A Reverse Service Inlets; 3 Wires, 3 Poles, Style 1 Grounding (shell only), Clamp-On Cable O.D. Min.-Max.
200A Reverse Service Inlets; 3 Wires, 4 Poles, Style 2 Grounding (shell and extra pole), Clamp-On Cable O.D. Min.-Max.
200A Reverse Service Inlets; 4 Wires, 4 Poles, Style 1 Grounding (shell only), Spring Cable O.D. Min.-Max.
400A Reverse Service Inlet; 3 Wires, 4 Poles, Style 2 Grounding (shell and extra pole), Clamp-On Cable O.D. Min.-Max.
74
Pin & Sleeve Devices, Plugs & Receptacles
Mounting Boxes and Replacement Interiors for
Appleton® Powertite® Pin and Sleeve Devices
t Include four integral mounting lugs
t Box comes with angle adapter
Mfr.’s Model No.
Description
AJA510
Mounting Box for 60A and 100A Interiors; (1) End Hubs,
1-1/2" Hub Size
200A Replacement Interior; (1) End Hubs, 2" Hub Size
400A Replacement Interior; (2) Feed-Thru and Plug Hubs,
3 or 4" Hub Sizes
AJA620
AJAC400
WIRING DEVICES
Appleton® PRE Series 16 Amp Plugs and Sockets
t ATEX / IECEx / II2GD
t Plug and socket system is designed with a safe disconnect mechanism to insure
maximum hazardous location protection
t Short circuit protection is 20 kA, while normal reference is 10 kA
t Receptacles are color-coded blue for easy identification
t The receptacles are keyed to accept only Appleton/ATX plugs
t Plugs can be used in non-hazardous IEC 309 sockets
t Operating temperature of -40° C–+55° C
Replacement Receptacles for
Appleton® U-Line Series
t Integral spring door protects receptacle
from dust and moisture when not in use
t Rated 20A/125V
WIRING DEVICES
PRE316PB
PRE316RB
EFSR-2023
Mfr.’s Model No.
Description
EFSR-2023
Aluminum Replacement Receptacle; 2W3P Grounding,
5-20R NEMA
Malleable Iron Replacement Receptacle; 2W3P Grounding,
5-20R NEMA
EFSR-2023M
Appleton® U-Line Explosion-Proof
Straight-Blade Receptacles
t Factory-sealed, explosion-proof, and
dust-ignition-proof design
t Feature dead-front safety construction
t Provide grounding through extra pole and shell
t Integral spring door protects receptacle from
dust and moisture when not in use
t Available with aluminum receptacle and
malleable iron box or all-malleable iron
construction
t Rated 20A/125V
EFS150-2023
Mfr.’s Model No.
Mfr.’s Model No.
Description
PRE316RB
Low Voltage: LV Wall Socket; Voltage: 200/250 Vac
50/60Hz; Weight: 0.6 kg; Volume: 3.8 dm³
Low Voltage: LV Plug, Voltage; 200/250 Vac 50/60Hz;
Low Voltage: LV Mobile Socket; Voltage: 200/250 Vac
50/60Hz; Weight: 0.4 kg; Volume: 1.3 dm³
PRE316PB
PRE316MB
Appleton® Interchanger™ ECP Series
Straight-Blade Plugs
t Use with Appleton U-Line Series receptacles
t Also for use with 20A cable connectors and
NEMA 5-15R, 5-20R, or 6-20R receptacles
in nonclassified areas
t Watertight construction for use in
very wet environments
t All-aluminum construction
Mfr.’s Model No.
Description
ECP-1523
ECP-2023
15A, 125V, 2W3P Grounding Poles/Wires, 5-15P NEMA
20A, 125V, 2W3P Grounding Poles/Wires, 5-20P NEMA
Description
EFS150-2023
Aluminum/Malleable Iron, Single-Gang, Dead-End Type;
2W3P Grounding, 5-20R NEMA, 1 Hub, 1/2" Hub Size
EFS175-2023 Aluminum/Malleable Iron, Single-Gang, Dead-End Type;
EFSC150-2023 Aluminum/Malleable Iron, Single-Gang, Feed-Through Type;
2W3P Grounding, 5-20R NEMA, (2) Feed-Thru Hubs,
1/2" Hub Size
EFSC175-2023 Aluminum/Malleable Iron, Single-Gang, Feed-Through Type;
2W3P Grounding, 5-20R NEMA, (2) Feed-Thru Hubs,
3/4" Hub Size
EFS275-2023
Aluminum/Malleable Iron, Two-Gang, Dead-End Type;
EFSC275-2023 Aluminum/Malleable Iron, Two-Gang, Feed-Through Type; 2W3P
Grounding, 5-20R NEMA, (2) Feed-Thru Hubs, 3/4" Hub Size
75
WIRING DEVICES
WIRING DEVICES Plugs & Receptacles
Cooper Crouse-Hinds® 30, 60 and 100 Amp
Arktite® Pin & Sleeve Plugs and Receptacles
Cooper Crouse-Hinds® Macey Exd Mining
Coupling Systems
Used to supply power to
portable electric devices
in industrial, high-abuse
applications
Designed for use in both underground and
open cut coal and metalliferous mines
t Grounding contacts make-first and
break-last in the unlikely event
of keyway failure
t Arcs are instantly snuffed in the deep confined insulated arcing chamber
t Plug sleeve is keyed to the receptacle to prevent mispolarization
t Tri-Lock™ cable grip has three-piece design that equally distributes gripping
power around perimeter of cable
t Unique Sure-Seal™ cable gland has two gasket sizes which fit
entire range of cable diameters, reducing risk of improper assembly
t Gasketing system provides unsurpassed watertight integrity
t All aluminum Uni-Shell™ construction provides
superior strength in abusive environments
t UL, CSA and CENELEC Listed
Cooper Crouse-Hinds® Explosionproof NEMA
Plugs and Receptacles
t Restrained range: used to supply and
monitor power to portable equipment
such as shuttle cars, continuous
miners, drill rigs (jumbo’s), etc.;
covers a complete range from
60 to 425 Amps continuous in a
voltage range up to 3300 Volts
t Bolted range: used to supply main
power to a pit or to a section isolator,
transformers, and other fixed
installations in underground coal mines
such as lighting, pumps and lasers; covers
a range from 55 to 800 Amps continuous in
a voltage range up to 11000 Volts
t Designed to meet both IEC and Australian
standards and are fully interchangeable with
plugs and receptacles designed to ASNZS1299
and ASNZS1300
Cooper Crouse-Hinds® Interlocked Receptacles
with Enclosed Disconnect Switches
Used to supply power to portable or fixed electrical equipment such
as generators, compressors, welders, etc.
t The industry’s most complete offering of mechanical interlocks for harsh and
hazardous applications
t 30A, 60A and 100A devices are designed for use in areas where gases, dust, moisture
and corrosion may be a problem
t Ensures that a plug cannot be
engaged or disengaged under load
Used when power requirements do not exceed 20 amperes
ENR11201
ENR5201
t For general purpose applications,
especially where temporary power is required
t Explosionproof, dust-ignitionproof
t Plug features standard captive set screw design, which assures ease of installation
and reduces likelihood of losing critical components in the field
t Plug insulator and contact components are a single piece assembly
t Receptacle interlock mechanism prevents accidental shock
t Receptacle features top-hinged cover design with 45° downward angle which
provides superior protection in damp, wet, and dirty locations
t Cl. I, Div. 1 & 2, Groups B, C, D; Cl. II, Div. 1 & 2, Groups F, G
76
Plugs & Connectors WIRING
DEVICES
Cooper Interconnect Quik-Loc
Cooper Interconnect Roughneck
Medium voltage connectors designed for service under
the most severe mining conditions.
Single-pole high amperage connectors specifically designed
for oil drilling applications.
t Molded neoprene components and
manganese couplings, along with
stainless steel clamps, are unaffected
by most chemicals
t Quick field assembly requires
standard tools with color-coded
wiring terminals, indicating proper
conductor locations
t Couplers with “pin and groove”
design support engagement and
disengagement in just 3/4" turn
t Couplers revolve freely on
replacement ball bearings
t Compression fit of neoprene
components and cable hugging
grommets provides a
moisture-tight seal
t Positive water seal between mated
connectors is provided by an O-ring
seal molded to the connector
t Colored receptacle housings and insulators provide easy circuit identification
t Epoxy powder-coated receptacle shell housing and stainless steel hardware
provides superior corrosion resistance
t NEMA 3 product rating provides maximum environmental protection
t Male contacts are equipped with Cam-Lok’s safe front-insulated tip to
minimize potential shock hazard
t Latching device designed to allow insertion of lockout/tagout devices to
provide additional security (or ability to padlock)
WIRING DEVICES
Mfr.’s Model No.
Description
E1049-1808X-BK
E1049 Male Receptacle Double Hole Bus Bar with Shell
Assembly Black
Assembly Red
Assembly Green
Assembly White
Assembly Blue
Assembly Yellow
Assembly Brown
Assembly Orange
E1049 Female Plug 535mcm Crimp/Solder Black
E1049 Female Plug 535mcm Crimp/Solder Yellow
E1049 Female Plug 535mcm Crimp/Solder Red
E1049 Female Plug 535mcm Crimp/Solder Orange
E1049 Female Plug 535mcm Crimp/Solder Green
E1049 Female Plug 535mcm Crimp/Solder White
E1049 Female Plug 535mcm Crimp/Solder Blue
E1049 Female Plug 535mcm Crimp/Solder Brown
E1049-1810X-R
Mfr.’s Model No.
UPC#
Description
3325656-7
3325656-9
X8343-12C
X8343-4D
X8343-4G
66227519886
66227519888
66227515594
66227515599
66227515600
X8343-5D
X8343-5G
66227515603
66227515604
X8343-5L
X8344-4D
X8344-5D
X8344-5G
66227515605
66227515614
66227515617
66227515618
X8344-5L
X8345-10C
X8345-5D
X8345-5G
66227515619
66227515623
66227515628
66227515629
X8345-6G
66227515632
X8346-1D
X8346-1G
66227515639
66227515640
X8346-1L
66227515641
X8346-2D
X8346-2G
66227515646
66227515647
X8346-2L
X8346-8C
X8346-8L
66227515648
66227515653
66227515654
X8347-1D
X8347-2D
X8347-8C
66227515655
66227515660
66227515664
Female Plug and Receptacle Protective Cap
Female Plug and Receptacle Protective Cap
Female Receptacle with Pilots, #8 AWG
Female Plug with Pilots, #8 AWG
Female Plug “Grounded” Series with Pilots,
#8 AWG
Male Plug with Pilots, #8 AWG
Male Plug “Grounded” Series with Pilots,
#8 AWG
Male Plug “Lever” Series with Pilots, #8 AWG
Female Plug with Pilots, #4 AWG
#4 AWG
Male Plug “Lever” Series with Pilots, #4 AWG
Female Receptacle with Pilots, #2 AWG
#2 AWG
#2 AWG
Female Plug with Pilots, #2/0 AWG
#2/0 AWG
Female Plug “Lever” Series with Pilots,
#2/0 AWG
Male Plug with Pilots, #2/0 AWG
#2/0 AWG
Male Plug “Lever” Series with Pilots, #2/0 AWG
Female Receptacle with Pilots, #2/0 AWG
Female Receptacle “Lever” Series with Pilots,
#2/0 AWG
Female Plug with Pilots, #4/0 AWG
Male Plug with Pilots, #4/0 AWG
Female Receptacle with Pilots, #4/0 AWG
E1049-1812X-G
E1049-1813X-W
E1049-1814X-BL
E1049-1809X-Y
E1049-1815X-BR
E1049-1811X-OR
E1049-50
E1049-51
E1049-52
E1049-53
E1049-54
E1049-55
E1049-56
E1049-57
E1049-60
E1049-61
E1049-62
E1049-63
E1049-64
E1049-65
E1049-66
E1049-67
E1049-70
E1049-72
E1049-73
E1049-74
E1049-76
E1049-75
E1049-77
E1049-71
77
WIRING DEVICES
Plugs & Connectors
Woodhead® Watertite® Rubber Straight-Blade Plugs and Connectors
t Meet NEMA Type 4, 4X, 6 and 6P, IP65, 66, and 67
requirements
t Feature an integral multiple ring that locks
snugly to protect against moisture
t Closure cap seals connector when not in use
t NEoTEX® rubber construction withstands heat,
weather, oil, and chemicals
WIRING DEVICES
14W47
15W47
Mfr.’s Model No.
Description
14W47
14W33
15W47
15W33
15A, 2-Pole 3-Wire Grounding Plug; 125V, NEMA 5-15P, Cord Diameter: 0.062-0.625", Yellow
20A, 2-Pole 3-Wire Grounding Plug; 125V, NEMA 5-20P, Cord Diameter: 0.062-0.625", Yellow
15A, 2-Pole 3-Wire Grounding Connector; 125V, NEMA 5-15R, Cord Diameter: 0.062-0.625", Yellow
20A, 2-Pole 3-Wire Grounding Connector; 125V, NEMA 5-20R, Cord Diameter: 0.062-0.625", Yellow
Woodhead® NEMA and Non-NEMA Watertite® Rubber Locking Plugs and Connectors
t Provide reliable protection in wet and abusive
environments
t Feature an integral multiple ring that locks snugly to
protect against moisture and contaminants
t NEoTEX® rubber construction withstands heat,
t Closure cap seals the connector when not in use
t Meets NEMA Type 4, 4X, 6, and 6P, IP65, 66, and
67 requirements
24W47
Mfr.’s Model No.
Description
24W47
24W34
26W47
26W48
26W75
26W76
28W47
28W75
28W76
24W07
26W08
26W09
28W09
25W47
25W34
27W47
27W48
27W75
27W76
29W47
29W75
29W76
25W07
27W08
27W09
29W09
15A, 2-Pole 3-Wire Grounding Plug; 125V, NEMA L5-15P, Cord Diameter: 0.062-0.625"
20A, 3-Pole 4-Wire Grounding Plug; 250V 3Ø, NEMA L15-20P, Cord Diameter: 0.187-0.812"
30A, 2-Pole 3-Wire Grounding Plug; 125V, Cord Diameter: 0.062-0.625"
20A, 3-Pole 3-Wire Non-grounding Plug; 125/250V, Cord Diameter: 0.187-0.812"
15A, 2-Pole 3-Wire Grounding Connector; 125V, NEMA L5-15R, Cord Diameter: 0.062-0.625"
20A, 3-Pole 4-Wire Grounding Connector; 250V 3Ø, NEMA L15-20R, Cord Diameter: 0.187-0.812"
15A, 3-Pole 3-Wire Non-grounding Connector; 125V, Cord Diameter: 0.062-0.625"
20A, 3-Pole 3-Wire Non-grounding Connector; 125/250V, Cord Diameter: 0.187-0.812"
78
25W47
Plugs & Connectors
Woodhead® Super-Safeway® Rubber Straight-Blade
Plugs and Connectors
t For use in rugged industrial environments
t Feature self-centering cord clamp that eliminates stress on wire
terminations to extend operating life
t Tough NEoTEX® housing provides long service life
Woodhead® Safeway® Nylon Plugs and Connectors
t Rugged nylon construction ensures long service life
t For use in industrial and OEM applications
t Feature self-centering cord clamp that eliminates stress on wire
terminations to extend operating life
5266
1447
1447
15A, 2-Pole 3-Wire Grounding Plug, 125V, NEMA 5-15P,
Cord Diameter: 0.335-0.640", Yellow
20A, 2-Pole 3-Wire Grounding Plug, 125V, NEMA 5-20P,
Cord Diameter: 0.335-0.640", Yellow
15A, 2-Pole 3-Wire Grounding Connector, 125V, NEMA
5-15R, Cord Diameter: 0.335-0.640", Yellow
20A, 2-Pole 3-Wire Grounding Connector, 125V, NEMA
5-20R, Cord Diameter: 0.335-0.640", Yellow
1533
Woodhead® Super-Safeway® NEMA and Non-NEMA
Rubber Locking Plugs and Connectors
2447
Mfr.’s Model No.
Description
2447
15A, 2-Pole 3-Wire NEMA, Grounding Plug;
125V, NEMA L5-15P, Cord Diameter: 0.335-0.640"
480V 3Ø, NEMA L16-30P, Cord Diameter: 0.425-1.150"
15A, 3-Pole 3-Wire Non-NEMA, Non-grounding Plug;
125V, Cord Diameter: 0.325-0.840"
125V, Cord Diameter: 0.425-1.150"
125/250V, Cord Diameter: 0.325-0.840"
15A, 2-Pole 3-Wire NEMA, Grounding Connector;
125V, NEMA L5-15R, Cord Diameter: 0.335-0.640"
20A, 2-Pole 3-Wire NEMA, Grounding Connector;
125V, NEMA L5-20R, Cord Diameter: 0.325-0.840"
15A, 3-Pole 3-Wire Non-NEMA, Non-Grounding Connector;
125V, Cord Diameter: 0.325-0.840"
30A, 3-Pole 3-Wire Non-NEMA, Non-Grounding Connector;
125/250V, Cord Diameter: 0.325-0.840"
2876
2407
2608
2808
2547
2747
2507
2908
Description
5266
15A, 2-Pole 3-Wire Grounding Plug; 125V, NEMA 5-15P,
Cord Diameter: 0.335-0.640"
15A, 2-Pole 3-Wire Grounding Plug; 250V, NEMA 6-15P,
Cord Diameter: 0.335-0.640"
15A, 2-Pole 3-Wire Grounding Connector; 125V, NEMA
5-15C, Cord Diameter: 0.335-0.640"
15A, 2-Pole 3-Wire Corrosion-Resistant Grounding Duplex
Receptacle; 125V, NEMA 5-15R, Yellow
5666
5269
5262DWCR
Woodhead® Super-Safeway®
NEMA Nylon and Plastic
Locking Plugs
t For use in industrial and OEM applications
t Feature self-centering cord clamp that
eliminates stress on wire terminations to
extend operating life
t Built to endure rigorous,
abrasive industrial conditions
t Feature self-centering cord clamp that eliminates
stress on wire terminations to extend operating life
t Tough NEoTEX® housings provide long service life
2647
Mfr.’s Model No.
4720
Mfr.’s Model No.
Description
4720
15A, 2-Pole 3-Wire Nylon Grounding Plug;
20A, 2-Pole 3-Wire Nylon Grounding Plug;
20A, 2-Pole 3-Wire Plastic Grounding Corrosion-Resistant
Single Receptacle; 125V, NEMA L5-20P, Cord Diameter:
0.335-0.640"
26T47
4747CR
26T76
20A, 3-Pole 4-Wire Nylon Grounding Plug; 480V 3Ø,
NEMA L16-20P, Cord Diameter: 0.325-0.840"
Woodhead® Safe-T-Chek™
GFCI Straight-Blade Outlet
t User installed GFCI outlet attaches to any
14/3 electrical cord
t Features Safe-T-Chek manual reset that
must be activated after a power outage or
ground fault condition
t Safe-T-Chek prevents the potential risk of
unmonitored equipment start-up
15054
Mfr.’s Model No.
Description
15054
1 GFCI Outlet, 15A, 125V
79
WIRING DEVICES
Description
1547
5269
1547
Mfr.’s Model No.
1433
WIRING DEVICES
WIRING DEVICES
Plugs & Connectors, Receptacles
Woodhead Brad® High-Voltage Mining Connectors
WIRING DEVICES
Brad Harrison high-voltage connectors are commonly used in the mining and
heavy construction industry on power feeders (stationary), trailing cables, and
extensions (portable). Molded from tough, resilient, thermo-set elastomer
material, these rugged connectors stand up to all sorts of severe abuse.
They feature quick, hex-key field termination and watertight molded seals
that do not require messy filling compounds. Rated to 8000 volts, 3-phase
maximum, 285 amperes per phase — grounded or ungrounded neutral
systems. Uses Type G and GC, PG and PCG, SHD-GC and other mining
cables from #2 AWG to 4/0 AWG in diameters from 1.75 to 3.00 inches.
Woodhead® Watertite® Rubber
Straight-Blade Receptacles
t Includes watertight flip-lid cover
60W47
t Available in single or duplex versions
60W47DPLX
Mfr.’s Model No.
Description
60W47
15A, 2-Pole 3-Wire Grounding Single Receptacle; 125V,
NEMA 5-15R, Watertight Flip-Lid, Yellow
15A, 2-Pole 3-Wire Grounding Duplex Receptacles; 125V,
20A, 2-Pole 3-Wire Grounding Single Receptacle; 125V,
60W47DPLX
60W33
Woodhead® Watertite® NEMA and Non-NEMA
Rubber Locking Receptacles
t Features an integral multiple ring that
locks snugly to protect against moisture
and contaminants
t NEoTEX® rubber withstands heat,
t Watertight flip-lid keeps out moisture,
dirt, and contaminants
t NEMA Type 4, 4X, 6 and 6P, IP65, 66,
and 67
Mfr.’s Model No.
UPC#
Description
1300210010
78678825845
1300210017
78678825847
Male High-Voltage Connector
for Stationary Applications
Female High-Voltage Connector
for Stationary Applications
Male High-Voltage Connector
for Portable Applications
Female High-Voltage Connector
for Portable Applications
1300210014
78678825846
1300210021
78678825848
65W34
Mfr.’s Model No.
Description
65W34
15A, 2-Pole, 3-Wire NEMA, Grounding Single Receptacle;
277V, NEMA L7-15R
125V, NEMA L5-20R
480V 3Ø, NEMA L16-20R
125V, NEMA L5-30
480V 3Ø, NEMA L16-30R
20A, 3-Pole, 3-Wire Non-NEMA, Non-Grounding Single
Receptacle; 125/250V
67W47
67W76
69W47
69W76
67W08
80
Outlet Boxes, In-Line Cords
WIRING DEVICES
Woodhead® Heavy-Duty and Watertite® GFCI Outlet Boxes
t
t
t
t
t
Molded NEoTEX® rubber box with spring-loaded flip-lid covers
Includes two duplex outlets with manual reset GFCI protection
Outlet boxes are circuit breaker protected at 20A
Includes ground continuity monitor
UL® Listed
32HG15L123
32GM15L123
Description
32GM15L123
32GM15B123
32HG15L123
32HG15B123
GFCI Outlet Box, 6' 12 AWG SOW Cord; 2 Duplex Outlets, 15A, 120V, 12 Gauge, 3 Conductors
GFCI Outlet Box, 50' 12 AWG SOW Cord; 2 Duplex Outlets, 15A, 120V, 12 Gauge, 3 Conductors
GFCI Outlet Box, 6' 12 AWG SOW Cord; 2 Duplex Outlets, 15A, 120V, 12 Gauge, 3 Conductors, Watertight Connectors
GFCI Outlet Box, 50' 12 AWG SOW Cord; 2 Duplex Outlets, 15A, 120V, 12 Gauge, 3 Conductors, Watertight Connectors
WIRING DEVICES
Mfr.’s Model No.
Woodhead® Safe-T-Chek™ Portable GFCI Adapter Cords
t
t
t
t
t
t
Safe-T-Chek manual reset must be activated after a power outage or ground fault condition, and prevents the risk of unmonitored equipment start-up
Spring-loaded contacts
UL® Listed and CSA Certified
Available in auto reset versions
Available in with multiple outlets, outlet boxes, and lengths 6 and 25 foot lengths
Contact your local WESCO Representative for ordering information
15050-1
15050-3TT
Mfr.’s Model No.
Description
15050-1
15050-3TT
20051-0M
24052-0M
30051-0M
30053-0M
20051-1M
20052-1M
24052-1M
30052-1M
30054-1M
Safeway GFCI, 15A/120V, 2' 14/3 SJTW Cord, 5-15, Manual Reset, 1 Receptacle
Safeway GFCI, 15A/120V, 2' 12/3, SJTW Cord, 5-15, Manual Reset, 3 Receptacles
Super-Safeway GFCI, 20A/120V, 2' 12/3, SJE00W Cord, Flying Leads, Manual Reset
Super-Safeway GFCI, 20A/120V, 2' 12/3, SJE00W Cord, 5-20, Manual Reset, 1 Receptacle
Super-Safeway GFCI, 20A/120V, 2' 12/3, SJE00W Cord, 5-30, Manual Reset, 1 Receptacle
Super-Safeway GFCI, 20A/240V, 2' 12/3, SJE00W Cord, L6-20, Manual Reset, 1 Receptacle
Super-Safeway GFCI, 30A/120V, 2' 10/3, SJE00W Cord, L5-30, Watertite, Manual Reset, 1 Receptacle
Super-Safeway GFCI, 30A/240V, 2' 10/3, SJE00W Cord, L6-30, Watertite, Manual Reset, 1 Receptacle
20052-1M
81
WIRING DEVICES
Switches, Control Stations
Appleton® EDS and EFS Series
Single-Gang Tumbler Switches
Appleton® SWE Series 16-Amp
Switches — Increased Safety
WIRING DEVICES
t Use in areas designated Zone 1 & 2 and 21 & 22
t Provide IP66 ingress protection and IK09
impact resistance
t Operate from -20 to 40° C
t Termination: 2.5mm²
Mfr.’s Model No.
Description
EFS150-F1
Nonsealed Front Operated,
Single-Pole; Lever Operator,
(1) 1/2" Hub
EDS175-F1
Factory Sealed Front Operated,
Single-Pole; Lever Operator,
(1) 3/4" Hub
t Use in areas designated Zone 1 & 2 and 21 & 22
t Provide IP66 ingress protection and
IK09 impact resistance
t Operate from -20 to 55° C
t Feature green LED pilot light, green push button
with one NO contact, red push button with
one NC contact
t Other configurations and operators available
SWE162S201AG
Mfr.’s Model No.
Description
SWE016C101AG Switch Type: 16 Amp Changeover;
SWE162S201AG Switch Type: 16 Amp 2-Pole;
SWE020S301AG Switch Type: 20 Amp 3-Pole;
Include two bottom M20 clearance holes, two M20 polyamide
cable glands and self-adhesive laminated plastic label with
black lettering
82
Appleton® Unicode 2 Series
Polyamide Control Stations
U43W2PGA5A9
Mfr.’s Model No.
Description
U43W2PGA5A9
Include two bottom M20 clearance holes, two M20 polyamide
cable glands and self-adhesive laminated plastic label with
black lettering
Circuit Breakers & Fuses
In This Section
WESCO & Eaton ......................84–85
Fuses ......................................86–90
Current Limiting .......................... 86
High Speed ................................ 86
Medium Voltage ......................... 86
Time Delay ............................86–90
Fast Acting ......................86–87, 90
Surge Protection Devices............... 87
Fuse Blocks .................................. 91
This is a
sampling of the
Circuit Breakers
& Fuses that
WESCO offers.
83
83
Service you need to get the best performance from your equipment
WESCO & EATON
QE2 Mining Service Breakers
Mining — Eaton components and
systems for mining applications
are engineered to meet the unique
requirements of this extremely difficult
and often dangerous environment.
Eaton offers both standard and
custom engineered solutions that
deliver the performance and reliability
needed to sustain 24/7 production
operations at peak efficiency.
Oil & Gas — Oil and gas exploration
has never been more challenging.
Drilling equipment must operate
in more remote and harsher
environments than ever before.
Equipment reliability is critical to keep
costs down and project timelines on
track. Eaton products are designed
to enhance the reliability of primary
drilling applications, while minimizing
risk to personnel and equipment.
Offering-high quality products and services that create a safer work environment, Eaton
has been the undisputed leader in electric power distribution to the mining industry for
40 years. Our breakers are available in seven frame sizes up to 2000A and 1000 VAC.
t Extensive field testing in harsh environments, as well as
tough design, ensure highest quality and dependability
t Protect all sizes of trailing cable defined by MSHA with just two
frames and three trip units, minimizing panel design time and
reducing inventory requirements
t All trip units and accessories can be field installed, providing
on-site customization capabilities and easy replacement
t Built-in test port makes it convenient to field test electronic
breakers using an optional hand-held test kit
t Eaton Authorized Breaker Service options extend the life of
your breakers with cleaning, testing, calibrating, handle or
cover replacement, and more, bringing your circuit breakers
to factory-restored standard
QW-VACiMB — MV Compact Circuit Breaker
Unmatched reliability, efficiency, and safety — the Eaton W-VACiMB features an
IEC rating of 17.5 kV, W-VACiMB compact circuit breakers are global solutions for
50 and 60 Hz.
t Industry-leading vacuum and solid
insulation technology
t Environmentally friendly — free of hazardous
SF6 gas that contributes to the greenhouse effect
and associated climate change
t Designed and third-party tested to the latest IEC
62271-100 and EC 62271-1 Standards
t Versatile — well-suited for special environment
conditions, such as high altitude, light shock,
vibration, and high ambient temperature
t Tested mechanically and electrically
at ISO® 9001-certified factory
t Sealed from dust and contaminants that are
prevalent in the mining industry, providing long,
reliable equipment life
t Provides valuable space savings for applications such as mining, where space is at a premium
t Requires little maintenance other than routine inspections, keeping costs down
t Makes and breaks power in a sealed environment with no external arcing — a significant safety
feature in mining applications where hazardous gasses can exist
84
QEaton Explosion-Proof Breakers,
Starters, and Pushbuttons
t Highest interrupt capability in the market — 65kAIC
t Copper-free cast aluminum
t Precision machined flame path between box and cover
t Stainless steel block hinges, captive quad-lead cover bolts,
breaker operator handle, and breaker operator shafts
t Reduced size means easier handling and installation,
resulting in cost saving
t UL® Classified: Standard 886
t CSA Certified: Standard C22.2
Design —
Engineering and consulting services
Eaton’s engineering and consulting services
focus on understanding your business
requirements and setting strategies for your
power system to satisfy them. Our engineers
and consultants can help diagnose problems,
identify ways to improve performance, or
transform concepts into flexible, practical
solutions that can improve productivity
and capital utilization.
Modernization and turnkey services
QEaton Ampgard® SC 9000™ MV Adjustable Frequency Drive
Eaton’s modernization and turnkey power
system services place personnel in the field
to complete a variety of undertakings, such as
managing a construction project from start to
finish, reconditioning or upgrading equipment,
or modernizing your power system.
t Smallest footprint per HP in the industry
t Fully integrated drive utilizing highly efficient
variable speed operation
Support —
t Easily integratable with other Ampgard products
Contract and support services
t Minimize noise pollution — runs at a 75db noise level or less
t Time and cost savings due to low mean time to repair (MTTR)
t No need for external auxiliary power supplies
(3 wires in — 3 wires out)
t Rugged design makes it the perfect choice for many speed control
applications, including harsh duty industries (HVAC, Pulp/Paper,
Petrochem, Water/Waste Water, Utility, Cement, Mining)
Eaton’s contract and support services provide
the maintenance, parts and services you
need to get the best performance from your
equipment already in place.
Aftermarket —
Parts and support services
Eaton provides a comprehensive offering of
life extension, modernization, and upgrade
solutions for the installed base of electrical
distribution and control equipment. These
aftermarket solutions include upgrading
to the most current control and circuit
protection technology and extending the life
of existing equipment with genuine renewal
parts, replacement components, factory
remanufacture and repair, and other services.
Eaton is a leader in supporting the installed
base of other manufacturers’ equipment, as
well as those original manufacturers no longer
in business.
85
WESCO & EATON
Build —
CIRCUIT BREAKERS & FUSES
Fuses
Cooper Bussmann FUSETRON™
Energy Efficient RK5 Fuses
Cooper Bussmann KTK Midget Fuses
Fast-acting 600Vac fuses
Safeguard against motor overload, ground faults,
and short circuits
t
t
t
t
t FUSETRON fuses are on average 23% more energy efficient
than the next leading brand*
t Class RK5 dual-element, time-delay fuse
t 200kA Interrupting Rating
t UL® Listed and CSA certified
t 250Vac & 600Vac available
from 1/10 – 600A
Cooper Bussmann FNQ-R Class CC Fuses
* Test results are based on weighted sales volume of FUSETRON and Ferraz Shawmut fuses by
selected amp and volt rating combination. Next leading brand refers to Ferraz Shawmut based
on third-party fuse market share data for a twenty-seven month period (July 2008 through
September 2010).
Ideal for small motor circuits
Interrupting rating of 100kA RMS Sym.
UL® Listed and CSA certified
Available from 1/10 – 30A
Cooper Bussmann Low-Peak™ Fuses—
Class CC, J, and RK1
Time-delay, rejection type branch circuit fuses
t
t
t
t
Ideal for small control transformers
Interrupting rating of 200kA RMS Sym.
UL® Listed and CSA certified
Available from 1/4 – 30A
Current-limiting, dual-element, time-delay, inventory consolidating fuses
t Selective coordination ratio of 2:1 helps prevent electrical blackouts
t Inventory consolidation provides a reduced SKU investment
and minimizes potential for misapplying fuses
t Current limitation reduces arc flash hazard
t UL® Listed and CSA certified
Cooper Bussmann High-Speed Fuses
High-speed protection for drives and other power conversion equipment
Square Body
t 13% more energy efficient
and 5% lower energy
let through*
t 21-day or less
lead time through
with QuikShip
Made-to-Order
service available
through your
WESCO distributor
t Available from 10 – 7500A
Round Body
t Excellent DC
performance
t UL Recognized
t Available from
1 – 4000A
*On average, compared to competitive fuses
Class CC
Class J
Class RK1
Class CC
t Rejection-type fuse ideal for branch and small motor circuits
t 600Vac Interrupting rating of 200kA RMS Sym. (20kA DC @ 300Vdc)
t Available from 1/2 – 30A
Class J
t Separate overload and short-circuit elements provide time-delay for high inrush loads
t Interrupting rating of 300kA RMS Sym.
t Available from 1 – 600A
Class RK1
t Insulated end caps reduce exposure to live parts and extends air gap distance
between blades of adjacent mounted fuses or to housing
t Interrupting rating of 300kA RMS Sym.
t 250Vac and 600Vac available from 1/10 – 600A
86
Cooper Bussmann R-Rated
Medium-Voltage Fuses
Current-limiting fuses used with
medium-voltage motors and motor controllers
t Open fuse indicator for ease of troubleshooting
t UL Recognized
t Available from
2.4 – 7.2kV, 25 – 450A
(up to 24R)
Cooper Bussmann PT Medium-Voltage Fuses
Low-current ratings for use in voltage transformers
t For use in potential
transformers and
small/medium
service transformers
t Space saving design
t Available from 1 – 38kV, 1.2 – 15A
Fuses
Cooper Bussmann DIN-Rail Surge Protective Devices
Cooper Bussmann Finger-Safe CUBEFuse™
Surge Protection Made Simple™ for UL® & IEC applications
Time-delay and fast-acting protection in the smallest footprint
t Modular DIN-Rail design with color-coding and rejection feature makes
it easy to identify, install, and maintain
t Vibration- and shock-resistant according to EN-60068-2
standards to withstand harsh environments
t UL 1449 3rd Edition Recognized
SPD devices provide optimum surge
protection for the United States and
Canadian 508A applications
t IP20 Finger-safe design improves
electrical safety
IEC SPD
t High surge discharge capacity due to
heavy-duty zinc oxide varistor and
spark-gap technology
t Wide range of IEC Class I and Class II
SPD covering all the major markets
around the world
87
UL SPD
t Finger-safe fuses minimize
exposure to live parts, reducing
hazard to personnel
t Available in the Cooper
Bussmann Quik-Spec™
Coordination Panelboard for
easy installation in the smallest
fusible panel footprint
t Minimizes incident energy
and reduces arc flash hazards
utilizing Class J characteristics
t Both 600Vac/300Vdc Low-Peak
time-delay and 600Vac/dc UPS/
Critical application fast-acting
are available from 1 – 100A
Time-Delay Fuses
Mersen Tri-Onic® Class-RK5 Time-Delay Fuses
The industry’s most popular fuse for motor circuit protection. Manufactured with advanced materials technology, the Tri-Onic
TR-R and TRS-R current-limiting time-delay fuse is engineered for overcurrent protection of motors and transformers.
t
t
t
t
t
t
t
Time-delay for motor start-ups and transformer inrush currents without nuisance opening
Current-limiting for low peak let-thru current
Rejection-style design prevents replacement errors (when used with recommended fuse blocks)
Easy-to-read label for quick brand recognition and replacement
Metal-embossed date and catalog number for traceability and lasting identification
Fiberglass body provides dimensional stability in harsh industrial settings
High-grade silica filler ensures fast arc quenching and high current limitation
Mfr.’s Model No.
UPC#
Description
Mfr.’s Model No.
UPC#
Description
TR1R
TR2R
TR3R
TR4R
TR5R
TR6R
TR7R
TR8R
TR9R
TR10R
TR12R
TR15R
TR20R
TR25R
TR30R
TR35R
TR40R
TR45R
TR50R
TR60R
TR70R
TR75R
TR80R
TR90R
TR100R
TR110R
TR125R
TR150R
TR175R
TR200R
TR225R
TR250R
TR300R
TR350R
TR400R
TR450R
TR500R
TR600R
78200174758
78200174764
78200174768
78200174771
78200174773
78200174775
78200174777
78200174778
78200174779
78200174780
78200174781
78200174782
78200174784
78200174785
78200174786
78200174790
78200174791
78200174792
78200174793
78200174794
78200174797
78200174798
78200174799
78200174800
78200174801
78200174804
78200174805
78200174806
78200174807
78200174808
78200174811
78200174812
78200174813
78200174814
78200174815
78200174818
78200174819
78200174820
250VAC, 1A, Class-RK5 Time-Delay Fuse
TRS1R
TRS2R
TRS3R
TRS4R
TRS5R
TRS6R
TRS7R
TRS8R
TRS9R
TRS10R
TRS12R
TRS15R
TRS20R
TRS25R
TRS30R
TRS35R
TRS40R
TRS45R
TRS50R
TRS60R
TRS70R
TRS75R
TRS80R
TRS90R
TRS100R
TRS110R
TRS125R
TRS150R
TRS175R
TRS200R
TRS225R
TRS250R
TRS300R
TRS350R
TRS400R
TRS450R
TRS500R
TRS600R
78200174858
78200174864
78200174868
78200174871
78200174873
78200174875
78200174877
78200174878
78200174879
78200174880
78200174881
78200174882
78200174884
78200174885
78200174886
78200174900
78200174901
78200174902
78200174903
78200174904
78200174907
78200174908
78200174909
78200174910
78200174911
78200174914
78200174915
78200174916
78200174917
78200174918
78200174921
78200174922
78200174923
78200174924
78200174925
78200174928
78200174929
78200174930
Additional Products Available; Contact your local WESCO Branch for ordering information.
88
Time-Delay Fuses
Mersen Tri-Onic® Class RK5 Time-Delay MSHA Fuses
The Tri-Onic® DC fuse series is designed for DC circuit protection in surface and underground mines. The TRS-RDC is
MSHA approved and meets the industry’s most severe third party requirements for 600VDC rated fuses. The TRS-RDC
is a time-delay fuse with essentially the same time-current characteristics as the standard Tri-Onic fuse.
t DC rated for mine duty and other long time-constant applications
t Time-delay for motor start-ups and high inrush loads without nuisance opening
t Rugged glass melamine body for superior reliability in harsh environments
TRS100RDC
UPC#
Description
Mfr.’s Model No.
UPC#
Description
TRS1RDC
TRS2RDC
TRS3RDC
TRS4RDC
TRS5RDC
TRS6RDC
TRS7RDC
TRS8RDC
TRS9RDC
TRS10RDC
TRS12RDC
TRS15RDC
TRS20RDC
TRS25RDC
TRS30RDC
TRS35RDC
78200122924
78200122929
78200122933
78200122936
78200122938
78200122941
78200122942
78200122944
78200122945
78200122921
78200122922
78200174895
78200174897
78200174898
78200174899
78200174035
600VDC, 1A, Class-RK5 Time-Delay Fuse
TRS40RDC
TRS45RDC
TRS50RDC
TRS60RDC
TRS70RDC
TRS80RDC
TRS90RDC
TRS100RDC
TRS125RDC
TRS150RDC
TRS175RDC
TRS200RDC
TRS250RDC
TRS300RDC
TRS400RDC
78200174036
78200174037
78200174038
78200174926
78200174835
78200174836
78200174837
78200174838
78200174839
78200174817
78200174847
78200174891
78200174893
78200174894
78200174906
Mersen Amp-Trap 2000® Class CC Time-Delay Motor Protection Fuses
Amp-Trap 2000® ATDR small-dimension fuses can provide IEC Type 2 No-Damage protection to branch circuit components
and small motors – minimizing the risk of fault-related damage. ATDR Class CC fuses deliver the best time-delay
characteristics in their class with excellent cycling ability for small motor loads.
t
t
t
t
t
t
t
t
Time-delay for motor starting inrush currents without nuisance opening
Highly current-limiting for low peak let-thru current
Improved cycling ability for frequent motor starts/stops without nuisance fuse opening
High-visibility orange label ensures instant brand recognition, simplifies replacement
High-grade silica filler ensures fast arc quenching and optimum current limitation
ATDR30
Mfr.’s Model No.
UPC#
Description
Mfr.’s Model No.
UPC#
Description
ATDR1
ATDR2
ATDR3
ATDR4
ATDR5
ATDR6
ATDR7
ATDR8
78200190092
78200190094
78200190096
78200190097
78200190102
78200190103
78200190105
78200190106
600VAC, 1A, Class CC Time-Delay Fuse
ATDR9
ATDR10
ATDR12
ATDR15
ATDR20
ATDR25
ATDR30
78200190860
78200190107
78200190108
78200190110
78200190868
78200190869
78200190870
89
Mfr.’s Model No.
Time-Delay Fuses, Fast-Acting Fuses
Mersen Amp-Trap 2000® Class CC Time-Delay Transformer Protection Fuses
Take control of fault currents headed for your control transformer. ATQR small-dimension fuses feature time-delay
characteristics ideally suited for the high inrush currents of control transformers, solenoids, and similar inductive loads.
Mersen’s ATQR fuses provide superior protection for the branch circuits of electrical distribution systems.
t
t
t
t
t
t
t
Time-delay for control transformer inrush loads without nuisance opening
Highly current-limiting for low peak let-thru current
High-visibility orange label ensures instant brand recognition, simplifies replacement
High-grade silica filler ensures fast arc quenching and high current limitation
ATQR1/2
Mfr.’s Model No.
UPC#
Description
Mfr.’s Model No.
UPC#
Description
ATQR1
ATQR2
ATQR3
ATQR4
ATQR5
ATQR6
ATQR7
ATQR8
78200190637
78200190644
78200190653
78200190656
78200190658
78200190660
78200190662
78200190664
ATQR9
ATQR10
ATQR12
ATQR15
ATQR20
ATQR25
ATQR30
78200190665
78200190666
78200190473
78200190468
78200190470
78200190471
78200190472
Mersen Amp-Trap® Class CC Fast-Acting Fuses
Amp-Trap® ATMR fuses, in the Class CC family, are the smallest dimension 600VAC/DC fuses suitable for branch-circuit
protection. The ATMR is a popular choice for economical protection of control circuits and control circuit transformers
where available short circuit currents exceed 10,000 amperes.
t Rejection-style design prevents replacement errors when used with recommended fuse blocks
t Versatile design for individual component and branch circuit protection
t These fast-acting fuses give current-limiting protection to general circuits
ATMR10
Mfr.’s Model No.
UPC#
Description
Mfr.’s Model No.
UPC#
Description
ATMR1/10
ATMR1/8
ATMR2/10
ATMR1/4
ATMR3/10
ATMR1/2
ATMR3/4
ATMR1
ATMR1-1/4
ATMR1-1/2
ATMR2
ATMR2-1/2
ATMR3
782001903367
782001903374
782001903381
782001903398
782001903404
782001903411
782001903817
782001903824
782001901042
782001903831
782001903848
782001903855
782001903862
600VAC/DC, 1/10A, Class CC Fast Acting Fuse
600VAC/DC, 1A, Class CC Fast Acting Fuse
600VAC/DC, 1-1/4A, Class CC Fast Acting Fuse
ATMR3-1/2
ATMR4
ATMR5
ATMR6
ATMR7
ATMR8
ATMR9
ATMR10
ATMR12
ATMR15
ATMR20
ATMR25
ATMR30
782001903879
782001903886
782001903893
782001903909
782001903916
782001904517
782001904524
782001904531
782001904548
782001904814
782001904821
782001904838
782001904845
90
Fuse Blocks
Mersen Class R Fuse Blocks
Mersen Class R fuse blocks accommodate
all Class R power fuses. A choice of screw,
pressure plate, box, and special order stud
connectors fit a wide range of stranded or
solid copper or aluminum wire.
20308R
t All fuse clips are made
of high-conductivity
tin plated copper
t Insulators are either
molded glass-filled
polycarbonate or
phenolic with verified
dielectric strength in
excess of 2500V
20328R
20606R
20607R
21036R
62003R
21037R
21038R
60306R
60606R
61036R
UPC#
Description
Mfr.’s Model No.
UPC#
Description
20306R
20307R
20308R
20316R
20317R
20318R
20326R
20327R
20328R
20606R
20607R
20608R
21036R
21037R
21038R
22001R
22003R
24031R
24033R
2631R
2633R
782001750374
782001759933
782001750428
782001750305
782001750626
782001663810
782001750275
782001750053
782001750381
782001663858
782001663865
782001663872
782001664640
782001664657
782001664664
782001664671
782001664688
782001664732
782001664749
782001664787
782001664794
250V, 30A, 1-Pole, Box Connector Terminals
250V, 30A, 1-Pole, Screw Terminals
250V, 30A, 1-Pole, Pressure Plate Terminals
60306R
60307R
60308R
60316R
60317R
60318R
60326R
60327R
60328R
60606R
60607R
60608R
61036R
61038R
62001R
62003R
64031R
64033R
6631R
6633R
782001750725
782001759605
782001759599
782001750299
782001750657
782001664060
782001759346
782001750817
782001759339
782001750442
782001664107
782001759926
782001757380
782001665005
782001750336
782001665012
782001665067
782001665074
782001665142
782001665159
Mersen Midget and Class CC Fuse Blocks
Mersen 303 series Midget and Class CC fuse blocks accommodate all 30A Midget and Class CC fuses.
A choice of box, screw, or pressure plate connectors fit a wide range of stranded or solid copper wire applications.
t Insulators are glass-filled polycarbonate (GFPC) with verified dielectric strength in excess of 2500V
t All fuse clips are made of high-conductivity tin plated copper
Mfr.’s Model No.
UPC#
Description
30311
30312
30313
30321
30322
30323
30351
30352
30353
30311R
30312R
30313R
30321R
30322R
30323R
30351R
30352R
30353R
782001757878
782001757885
782001757892
782001758271
782001759995
782001758264
782001759940
782001759957
782001757908
782001758394
782001759483
782001758387
782001750091
782001750404
782001663568
782001663629
782001663636
782001663643
600V, 30A, Midget Class, 1-Pole, Screw Terminals with Double Quick Connects
600V, 30A, Midget Class, 1-Pole, Pressure Plate Terminals with Double Quick Connects
600V, 30A, Midget Class, 1-Pole, Box Connector Terminals
600V, 30A, Class CC, 1-Pole, Screw Terminals with Double Quick Connects
600V, 30A, Class CC, 1-Pole, Pressure Plate Terminals with Double Quick Connects
600V, 30A, Class CC, 1-Pole, Box Connector Terminals
30322R
91
Mfr.’s Model No.
What is WESCO Value Creation?
WESCO recognizes the many
challenges that companies
face in today’s competitive business
environment, including cost reduction,
productivity improvement, service, quality,
and safety. The WESCO Value Creation program
is designed to offer solutions and services to help our
valued customers overcome these challenges.
In understanding the positive impact that Lean principles had on
our business model, WESCO Value Creation was developed so that
our customers could benefit from our expertise in the industry and in Lean
applications. By expanding Value Creation throughout the entire business enterprise,
we bring significant value and cost savings to our customers and suppliers.
Green and
Sustainability
Production Support
Communications
Safety and Security
Construction
1. Identify Requirements
WESCO and the customer meet to build
a clear definition of Customer
Requirements:
i Customer Service
Improvement
i Cost Reduction
i Quality Improvement
i Productivity
Enhancement
Supply Chain
Optimization
e-Business
WESCO and Supplier experts design
customized solutions to maximize
productivity and value. Upon implementation,
customers realize true value and positive
bottom-line impact.
2. Align Solutions
WESCO’s experts review all of the
Customer’s requirements then
align them with the WESCO
Value Creation solutions.
WESCO and the Customer
work together to prioritize
the solution options
and create details for a
Search for Savings event.
3. Search
for Savings
WESCO and Supplier experts
engage the Customer team
in a Search for Savings event to
identify opportunities for continuous
improvement.
For more information on WESCO Value Creation,
send an e-mail to [email protected] or log on to www.wesco.com.
92
Working Capital
Engineering Services
Energy
i Safety Improvement
4. Customize
& Implement
Training
Transformers & Electrical Distribution
In This Section
WESCO &
Cooper Power Systems ............94–95
Control & Apparatus ...................... 96
Panelboards .................................. 97
Encapsulated Transformers ............ 98
Power Centers .............................. 99
DC Power Supplies ....................... 99
Distribution Blocks ....................... 100
This is a
sampling of the
Transformers &
products that
WESCO offers.
93
93
Cooper Power Systems is continuously reinventing
WESCO & COOPER POWER SYSTEMS
QEnvirotran™ Transformers
For more than a century,
electrical industry
professionals have
counted on the expertise
and unmatched portfolio
of innovative solutions and
products available from
Cooper Power Systems.
Through the company’s
engineering ingenuity and
expertise, Cooper Power
Systems is continuously
reinventing the way in
which energy is delivered,
bringing optimization
and automation to the
electrical grid.
Cooper Power Systems manufactures a complete line of Envirotran™
single-phase overhead, single-phase pad-mounted, three-phase
pad-mounted and substation distribution transformers in a variety of
ratings to meet or exceed the requirements of applicable ANSI and
NEMA standards and designed to withstand all environmental hazards
t Designed to meet or exceed all applicable ANSI, NEMA, IEEE Standards
t Optimized designs for higher operating efficiencies
t Deadfront technology (up to 35KV) for enhanced personnel safety
t Filled with biodegradable, high fire-point Envirotemp™ FR3™ dielectric fluid;
with the unique characteristic of extending paper insulation life
t Better contamination resistance
t Higher short- and long-term overloadability
t Routine maintenance does not
require downtime
t Complete switching, overcurrent, and
overvoltage protection accessory options
t 65/75 °C temperature rise options available
QCable Accessories
Cooper Power Systems provides a full range of 200 Amp & 600 Amp
molded rubber connectors and components, up to 35KV:
t Loadbreak Connectors
t Bushings and Bushing Wells
t Deadbreak Connectors
t Polymer Cutouts
t DirectConnect Elbow Arresters
t Splices
Polymer Cutout
FR3™ and Envirotemp™ are licensed trademarks of Cargill, Incorporated.
Envirotran™, E200™ and Cooper Power Systems are valuable trademarks of Cooper Industries in the US and other countries.
94
the way in which energy is delivered
QModular Integrated Transportable Substation (MITS)
MITS is an electrical power distribution substation or any other grouping of
electrical equipment that is assembled on a self-supporting structural base
and wired together (integrated) at the factory. Alternately the equipment
can be mounted on a D.O.T.-compliant trailer for mobile applications.
t A transportable solution that also works
great for permanent substations
QOverhead Distribution Equipment
Cooper Power Systems overhead electrical distribution equipment has a
long history of quality and reliability. Through advanced engineering and
support, these products have provided customers with decades of service.
t A full-line of electrical distribution
apparatus for use in overhead applications
– Capacitor switches
t Single-point contact for overall project
management of skid-mounted substations
– Cutouts
t Up to a 25-40% reduction in total installed
cost over conventional methods
– Fault indicators
t Helps reduce CO2 emissions by utilizing
Envirotran transformers and E200™
filled switchgear
– Sectionalizers
– Reclosers
– Single-phase switches
– Three-phase switches
Capacitor banks from Cooper Power Systems
feature the latest capacitor technology.
t Reduce losses and help reduce CO2 emissions
QRenewable Energy
t Supplement power from the utility with
renewable energy
t Maximize generation, transformer, and
feeder capacity
t Coordination throughout the entire planning,
design, installation, operation, and service
cycles of a solar or wind power project
t Designed to meet or exceed all applicable
ANSI/IEEE, NEMA, and IEC Standards
t Industry-leading innovation, expertise,
and service
t Ideal for harmonic filters
t Envirotran™ Solar and Envirotran™ Wind
transformers designed specifically for
renewable applications
t Metal-enclosed, pad-mounted capacitor
banks available
QSurge Arresters
QPad-Mounted Switchgear
VFI underground switchgear, with E200 fluid, is versatile in application and
provides a safer, more reliable, and environmentally preferred approach to
switching and protection requirements for 15, 25, and 35 kV systems.
™
t Obsoletes potent greenhouse
gas (SF6 ) equipment
WESCO & COOPER POWER SYSTEMS
QPower Capacitors
Cooper Power Systems has set a new standard of
excellence in UltraSIL™ polymer-housed, station- and
intermediate-class surge arresters. Improved energy
handling capability, increased creep distance, and
customization availability provide superior equipment
protection in a lightweight polymer arrester.
t Vacuum switching
does not contaminate the
insulating medium
t Improve your system reliability with up to
15% increased margin of overvoltage protection
t 100% dead-front
construction
t Tested in conformance with 1000 Hr salt fog test per
IEEE Std. C62.11 — 2005™ standard
t Safer than SF6 gas or
mineral oil-filled units
t Increased creep reduces arrester size needed in
highly contaminated environments
t More reliable approach
to medium-voltage
switching and protection
t Uses industry-preferred silicone rubber material
t Base with retrofit capability easily converts
from the standard base mount to suspension
or cubicle mount
t Overhead and underground applications
95
TRANSFORMERS & ELECTRICAL DISTRIBUTION
Cooper Crouse-Hinds® EDS/EFS Series
Control Stations
Cooper Crouse-Hinds® ACE Series
Explosionproof Variable Frequency Drives
Installed in a rigid metallic conduit system for surface mounting
adjacent to or remote from equipment being controlled
The only explosionproof VFD solution utilizing NEMA 7 with active cooling
t Used to prevent arcing of enclosed device
from causing ignition of a specific hazardous
atmosphere external to the enclosure
t Used with general purpose snap and
pushbutton type switches
t Standard neoprene covers for front operated
pushbuttons prevents accumulation of dirt
and water around operating shafts
t Mounting lugs and taper tapped
hubs with integral bushings
t Available in dead end or through feed hubs –
1/2" to 1" sizes
t Cl. I, Div. 1 & 2, Groups B, C, D;
Cooper Crouse-Hinds® GHG43 Series Control Stations
Control and Apparatus
Used as a remote means of motor control, visual indication of
equipment performance, and on-off control of circuits
t NEMA 4X, IP66 enclosure
with formed-in-place gasket
t Available with all operators:
indicator lights, potentiometers,
control switches, pushbuttons,
terminal blocks, and meters
t Base-mounted contact blocks
t Easy change-out components
snap in place on DIN rail
t Suitable for universal mounting
plates on pipes, conduit, wall,
or channels
t Cl. I, Div. 2, Groups A, B, C, D; Cl. II, Div. 1,
Groups E, F, G (cUL); Cl. I, Zones 1 & 2
t UL/cUL Listed
t Installed inside the hazardous areas, eliminating expensive, complicated installations
t There is no need to run long lines of conduit and motor cable, dig up roadways and
sidewalks, navigate around obstacles and hazards or build off-site control rooms in
non-hazardous areas to house VFD clusters
t Reflected Wave Syndrome is eliminated due to short motor cable runs
t Fine speed and torque control optimizes system performance and
reduces energy consumption
t Reduce stress on
electrical system
t Reduce water
hammer effects
with soft start
capability
t Lower speed/load on
bearings and seals
t Diagnostics help
locate disturbances to
the system and
suggest remedies,
allowing proactive
maintenance
decisions to be made
t Cl. I, Div. 1 & 2,
Groups B, C, D
YOUR MINING PARTNER EVERY STEP OF THE WAY
s GLOBAL FOOTPRINT TO HELP DELIVER WHEREVER YOUR BUSINESS TAKES YOU
s A BROAD PRODUCT OFFERING TO MAXIMIZE SAFETY, COST SAVINGS, AND PRODUCTIVITY
s QUALITY, COMPREHENSIVE SOLUTIONS AND SERVICES THERE WHEN YOU NEED THEM
96
Panelboards
Cooper Crouse-Hinds® PowerPlus™ Panelboards
Available in both factory sealed and non-factory sealed designs for the
protection and distribution of lighting, power and heat tracing circuits
Cooper Bussmann Quik-Spec™
Coordination Panelboard
Safe and simple protection for critical applications
t The safest and most
dependable panelboard for
hazardous area locations
t High quality silver-plated
copper buss system provides
high efficiency current flow
between the main feed and
branch breakers
t Lockout/tagout capable,
which complies with OSHA
safety requirements
t Spring-loaded, quick
release, captive stainless
steel cover bolts prevent
damage to the flat joint
flame path
t Stainless steel hinges
provide maximum
stability and allow cover
to swing fully open
t Integrated steel lifting
eye provides a stable
lifting position for easy
installation
t High integrity gasket
provides a watertight seal
t Self-aligning breaker
operators are designed
for both field and factory
installation
t Available with Div. 1 & 2 /
Zone 1 & 2 certifications,
or with Div. 2 / Zone 2
certifications only
t The best selective coordination solution in the smallest fusible footprint
(20"W x 5-3/4"D)
t Increase safety with the finger-safe time-delay or UPS/Critical Application
fast-acting CUBEFuse™ in ratings from 1-100A to closely match loads
t For use in Class I, Div. 2 hazardous environments when used with the
Cooper Crouse Hinds enclosure
t Ampacity rejection Compact Circuit Protector Base
(CCPB) branch disconnect switches help
prevent overfusing
t Provides 200kA SCCR and is UL & CSA listed
97
Acme® Single-Phase Stainless and Encapsulated
Transformers (Group I - 316SS)
Acme® Three-Phase Stainless and Encapsulated
Transformers (Group F - 316SS)
Acme’s single phase transformers
are designed for use in industrial and
commercial applications. Transformers
rated up to 25kVA are enclosed within
an encapsulated, NEMA 3R enclosure.
Acme’s low-voltage
distribution transformers
are designed for
industrial and commercial
applications. All of
Acme’s general-purpose
transformers are rated for
600V and below.
t 3R enclosure
t Comply with NEC® Class 1, Division 2,
when installed per NEC 501-2 (b).
t Encapsulated construction
t Single phase: 0.25–25kVA
t Core and coil assembly completely encapsulated
in polyester or epoxy, sealing out all moisture
and eliminating corrosion
t Designed for harsh industrial and mining
applications, waste water treatment facilities,
and more
Encapsulated Transformers
T253010SS
Mfr.’s Model No.
UPC#
Description
T253007SS
04750313050
T253008SS
04750313051
TFMR:1PH 250VA 240X480-120/240
Stainless Steel
TFMR:1PH 500VA 240X480-120/240
Stainless Steel
TFMR:1PH 750VA 240X480-120/240
Stainless Steel
TFMR:1PH 1.0kVA 240X480-120/240
Stainless Steel
TFMR:1PH 1.5kVA 240X480-120/240
Stainless Steel
TFMR:1PH 2.0kVA 240X480-120/240
Stainless Steel
TFMR:1PH 3.0kVA 240X480-120/240 4S
Stainless Steel
TFMR:1PH 5.0kVA 240X480-120/240 4S
Stainless Steel
TFMR:1PH 7.5kVA 240X480-120/240 3S
Stainless Steel
TFMR:1PH 10kVA 240X480-120/240 3S
Stainless Steel
TFMR:1PH 15kVA 240X480-120/240 3S
Stainless Steel
TFMR:1PH 25kVA 240X480-120/240 3S
Stainless Steel
T253009SS
04750313052
T253010SS
04750313053
T253011SS
04750313054
T253012SS
04750313055
T253013SS
04750313056
T253014SS
04750313057
T253515SS
04750313058
T253516SS
04750313059
T253517SS
04750313060
T253518SS
04750313061
t 3R enclosure
t Comply with NEC® Class 1,
Division 2, when installed
per NEC 501-2 (b).
t Encapsulated construction
T253010SS
t Three phase: 3–75kVA
t Core and coil assembly completely encapsulated in
polyester or epoxy, sealing out all moisture
and eliminating corrosion
t Designed for harsh industrial and mining applications,
waste water treatment facilities, and more
Mfr.’s Model No.
UPC#
Description
T2A53308SS
04750313062
T2A53309SS
04750313063
T2A53310SS
04750313064
T353311SS
04750313065
T379312SS
04750313066
T379313SS
04750313067
T379314SS
04750313068
TFMR:3PH 3.0kVA 480-208Y/120 1S
Stainless Steel
TFMR:3PH 6.0kVA 480-208Y/120 1S
Stainless Steel
TFMR:3PH 9.0kVA 480-208Y/120 1S
Stainless Steel
TFMR:3PH 15kVA 480-208Y/120 1S
Stainless Steel
TFMR:3PH 30kVA 480-208Y/120 3S
Stainless Steel
TFMR:3PH 45kVA 480-208Y/120 3S
Stainless Steel
TFMR:3PH 75kVA 480-208Y/120 3S
Stainless Steel
Acme® Industrial Control Transformers for Harsh Environments
(240x480 primary volts - 120 secondary volts)
Acme meets harsh application needs as these transformers are wound with copper magnet wire, deliver full
nameplate capacity, and provide the high regulation required in control applications. Designed for control
panels where internal installation of control transformers is prohibited.
t
t
t
t
Fully encapsulated and enclosed
55° C temperature rise, 155° C insulation
Copper windings
1000, 2000, 3000, 5000, and 10,000 VA sizes
t
t
t
t
Voltage regulation exceeds NEMA requirements
UL® and UL-3R Listed
CSA Certified
Ten-year limited warranty
Mfr.’s Model No.
UPC#
Description
T181217
T181219
T181220
T181221
T181223
04750341080
04750318312
04750318314
04750318316
04750384202
TFMR:1PH 1000 VA Encapsulated
TFMR:1PH 2.0kVA Encapsulated
TFMR:1PH 10kVA Encapsulated
98
T181217
Power Centers, DC Power Supplies
Acme® Single-Phase Panel-Tran®
Zone Power Centers
Acme® Three-Phase Panel-Tran®
Zone Power Centers
Acme’s Panel-Tran Power Center is a
pre-wired combination of a primary
breaker disconnect, dry-type shielded
transformer, secondary breaker
disconnect, and a secondary power
panel all in one package.
Acme’s Panel-Tran Power Center is a
pre-wired combination of a primary
breaker disconnect, dry-type shielded
transformer, secondary breaker
disconnect, and a secondary power
panel all in one package.
Mfr.’s Model No.
UPC#
PT061150005SS 04750333015
PT061150007SS 04750333016
PT061150010SS 04750333017
PT061150015SS 04750333018
PT061150025SS 04750333019
t 600V class and below
t 480 and 600V primary, 60 Hz
t Primary and secondary main circuit
breakers provided
t UL®-3R enclosure
t 9 through 30kVA three phase
t Meets or exceeds UL, CSA, NEMA, ANSI,
and OSHA Standards
t Ten-year limited warranty
t Shielded for cleaner power
t 304 stainless steel enclosure
Description
Mfr.’s Model No.
UPC#
TFMR:PANEL-TRAN 1PH 5.0kVA 480-240/120
TFMR:PANEL-TRAN 1PH 7.5kVA 480-240/120
Stainless Steel
TFMR:PANEL-TRAN 1PH 10kVA 480-240/120
Stainless Steel
Stainless Steel
Stainless Steel
PTBA3150009SS
04750372400 TFMR:PANEL-TRAN 3PH 9kVA 480-208Y/120
Stainless Steel
Stainless Steel
Stainless Steel
PTBA3150015SS
PTBA3150030SS
Description
Acme® DIN Rail-Mount DC Power Supplies
Compact, narrow design provides significant space savings.
t
t
t
t
t
Universal input, 90–264 VAC
Adjustable output voltage
DC OK LED indicator
IP 20 touch-safe rating
Power factor correction
t UL® 508 Listed
t CE Approved
t Up to five-year
limited warranty
Mfr.’s Model No.
Description
DM 1-12045*
DM 1-24025*
DM 1-2420
DM 1-480125*
DM 1-4810
DM 1-1206-S*
DM 1-1208-S
DM 1-1215-S
DM 1-24033-S*
DM 1-2405-S
DM 1-2410-S
DM 1-48017-S*
DM 1-48025-S
DM 1-4805-S
DIN PS, 54W, 12 VDC Output Voltage, 4.50A Output Current, 4.88"H x 1.97"W x 4.13"D
DIN PS, 480W, 24 VDC Output Voltage, 20A Output Current, 5.12"H x 6.14"W x 4.96"D
DIN PS, 480W, 48 VDC Output Voltage, 10A Output Current, 5.12"H x 6.14"W x 4.96"D
Slim Line DIN PS, 72W, 12 VDC Output Voltage, 6A Output Current, 4.88"H x 1.26"W x 4.02"D
Slim Line DIN PS, 80W, 24 VDC Output Voltage, 3.30A Output Current, 4.88"H x 1.26"W x 4.02"D
* Class 1, Division 2
99
t 600V class and below
t 480 and 600V primary, 60 Hz
t Primary and secondary main circuit
breakers provided
t UL®-3R enclosure
t 5 through 25kVA single phase
t Meets or exceeds UL, CSA, NEMA, ANSI,
and OSHA Standards
t Ten-year limited warranty
t Shielded for cleaner power
t 304 stainless steel enclosure
Distribution Blocks
Mersen Open-Style Power Distribution Blocks
Mersen power distribution blocks provide a safe,
convenient way of splicing cables.
t Standard aluminum box connectors accommodate
aluminum or copper wire, one conductor per opening
t Standard copper box connections are for copper wire
only, one conductor per opening
t Connectors are all one piece and tin plated
t Insulators are virtually unbreakable,
glass-filled polycarbonate
Mfr.’s Model No.
UPC#
Description
Mfr.’s Model No.
UPC#
Description
62153
78200175519
63193
78200165125
62192
78200165053
66263
78200175454
62202
78200165060
66633
78200165256
62203
78200165061
67001
78200165270
63103
78200175106
67002
78200165271
63130
78200175912
67003
78200165272
63131
78200165092
67423
78200175249
63132
78200175404
67513
78200165352
63133
78200175861
67563
78200175286
63150
78200165104
67663
78200165401
63152
78200165107
68223
78200141234
63153
78200165108
69092
78200165569
63161
78200175060
69122
78200165577
Aluminum, 3P; 175A, 1 x 2/0 Primary 2 x #14 Secondary
Copper, 3P; 400A, 3/8" Stud Primary 3/8" Stud Secondary
Copper, 3P; 310A, 1 x 350 Primary 8 x #2 Secondary
Aluminum, 1P; 310A, 1 x 350 Primary 1 x 350 Secondary
Aluminum, 2P; 380A, 1 x 500 Primary 2 x 4/0 Secondary
Aluminum, 3P; 310A, 1 x 350 Primary 6 x #2 Secondary
Aluminum, 3P; 400A, 1/2" Stud Primary 1/2" Stud Secondary
63163
78200167377
Copper, 3P; 175A, 1 x 2/0 Primary 1 x 2/0 Secondary
Copper, 2P; 175A, 1 x 2/0 Primary 2 x #2 Secondary
Aluminum, 3P; 85A, 1 x #4 Primary 1 x #4 Secondary
Aluminum, Adder; 175A, 1 x #4 Primary 4 x #4 Secondary
Aluminum, Adder; 175A, 1 x 2/0 Primary 1 x 2/0 Secondary
Aluminum, 2P; 175A, 1 x 2/0 Primary 1 x 2/0 Secondary
Aluminum, 3P; 175A, 1 x 2/0 Primary 1 x 2/0 Secondary
Mersen Finger-Safe Power Distribution Blocks
Mersen FSPDBs introduce a new level of safety
and ease for installing power distribution blocks.
t Recessed termination screws and wire openings provide IP20 grade
protection and qualify as “finger-safe” per IEC 529
t Compact, modular single or multiple pole configurations
in the most compact footprint
t Captive termination screws, unique channel design
ensures captive metric wire termination screws
t FSPDBs snap onto 35mm DIN rail to provide
the quickest installation
t 2/0 and #2 openings rated for two wires!
Mfr.’s Model No.
UPC#
Description
FSPDB1C
FSPDB2C
FSPDB3C
FSPDB1A
FSPDB2A
FSPDB3A
78200131959
78200131961
78200131963
78200131958
78200131960
78200131962
Copper, Line: (1) 2/0 - #14, Load: (1) 2/0 - #14
Copper, Line: (1) 2/0 - #14, Load: (4) #2 - #14
Copper, Line: (1) 350 - #6 or 2/0 - #14, Load: (8) #8 - #14
Aluminum, Line: (1) 2/0 - #14, Load: (1) 2/0 - #14
Aluminum, Line: (1) 2/0 - #14, Load: (4) #2 - #14
Aluminum, Line: (1) 350 - #6 or 2/0 - #14, Load: (8) #8 - #14
100
Tools, Testers, & Equipment
In This Section
Bars ............................................ 102
Pins ............................................ 102
Drifts ........................................... 102
Wedges ...................................... 103
Punches ..................................... 103
Sledge Hammers ........................ 103
Fish Tapes................................... 104
Fish Poles ................................... 104
Fish Sticks .................................. 104
Hole Saws .................................. 105
Knockout Punches ...............105–106
Analyzers .................................... 106
Testers .................................106–107
Calibrators................................... 107
Thermal Imagers .......................... 107
IR Windows ................................. 107
Particle Counter ........................... 108
Pressure Calibrators .................... 108
Multimeter ................................... 108
Heaters ................................109–110
Thermostats ................................ 110
This is a
sampling of the
Tools, Testers, &
Equipment that
WESCO offers.
101
101
TOOLS, TESTERS, & EQUIPMENT
Bars, Pins, Drifts
Klein Tools Pinch Bars — Hexagon
t Used for levering and aligning
t Forged from tough high-tensile carbon manganese steel
t Heel set to 40° angle for optimum levering; blade ground to 30°angle for
easy entry between surfaces
t Taper is forged, not turned, for finer grain to give greater tensile strength
t Hexagon profile for greater control and to minimize bar roll
t Correctly heat-treated to best suit product application
Klein Tools Scaling Bars —
Tubular Aluminum, Hexagon
t
t
t
t
t
Used for prying overhanging rock
Aluminum tube body for light weight and less user fatigue
Instered steel ends forged from tough carbon manganese steel
Heel offset to 40° angle for optimum levering
Hexagon shape for better control
7SCTH1800
5POB37520
Mfr.’s Model No.
UPC#
Description
5POB37516
5POB37520
5POB45016
5POB45020
5POB60020
5POB90020
09264446918-3
09264446919-0
09264446920-6
09264446921-3
09264446922-0
09264446923-7
15" Length, 5/8" Hexagon Diameter
Mfr.’s Model No.
UPC#
Description
7SCTH1800
09264446997-8
7SCTH2400
09264446998-5
7SCTH3000
09264446999-2
7SCTH3600
7SCTH4300
09264446786-8
09264446787-5
Tubular Aluminium, 71" Length,
1-1/4" Hexagon Diameter
Tubular Aluminium, 94-1/2" Length,
Tubular Aluminium, 118" Length,
12' Hex Hollow Aluminum
14' Hex Hollow Aluminum
Klein Tools San Angelo Digging Bar — Hexagon
t
t
t
t
t
t
t
Used for digging holes and breaking clay, rock, and concrete
Forged from tough, high-tensile carbon manganese steel
Ground and sharpened diamond point end for easier digging and breaking concrete
Both ends heat-treated for better performance and strength
Anti-corrosive primer with enamel finish
Hexagon bar profile for greater control
Long, tapered blade for easier digging
Klein Tools Podger Pins
t
t
t
t
t
t
Used for aligning holes and expanding holes in mild steel
Forged, not turned, long, tapered point for ease of aligning
For added safety, forged head prevents pin from falling through hole
Hex shaft allows spanner to be used to assist removal
Correctly heat-treated to best suit product application
5CB180025
5POP25
Mfr.’s Model No.
UPC#
Description
Mfr.’s Model No.
UPC#
Description
5CB150025
5CB150030
5CB165025
5CB165030
5CB180025
5CB180030
09264446860-5
09264446861-2
09264446862-9
09264446863-6
09264446864-3
09264446865-0
59" Length, 1" Hexagon Diameter
59" Length, 1-3/16" Hexagon Diameter
5POP25
5POP30
09264446924-4
09264446925-1
Podger Pin, 1" Hexagon Shaft Diameter
Podger Pin, 1-3/16" Hexagon Shaft Diameter
Klein Tools Fence Bars — Hexagon
t
t
t
t
t
t
t
Used for digging holes, breaking clay, and tamping posts tight
Long, tapered blade for easier digging
Blade heat-treated full-length for strength and performance
Knob is forged on bar, not welded, and is optimum size for tamping
Hexagon bar profile for greater control
Anti-corrosive primer with enamel finish
5FB165025
Mfr.’s Model No.
UPC#
Description
5FB150025
5FB150030
5FB165025
5FB165030
5FB180025
5FB180030
09264446870-4
09264446871-1
09264446872-8
09264446873-5
09264446874-2
09264446875-9
102
Klein Tools Starter Drifts — Large Body
t
t
t
t
t
t
t
Used for aligning holes in heavy construction
Designed for driving with hammer
Taper is forged, not turned, for finer grain to provide greater tensile strength
Will score edge when driven hard
Hex profile for better control
Correctly heat-treated to best suit product application
5SDL45020
Mfr.’s Model No.
UPC#
Description
5SDL30016
09264446933-6
5SDL45020
09264446934-3
5SDL45025
09264446935-0
5SDL45030
09264446936-7
5/8" Hexagon Shaft Diameter,
11/16" Diameter across Hexagon Points
25/32" Hexagon Shaft Diameter,
55/64" Diameter across Hexagon Points
1" Hexagon Shaft Diameter,
1-3/32" Diameter across Hexagon Points
1-3/16" Hexagon Shaft Diameter,
1-5/16" Diameter across Hexagon Points
Wedges, Punches, Sledge Hammers
Klein Tools Wedges
t
t
t
t
Klein Tools Soft-Faced Sledge Hammer —
Pinned Fiberglass Rubber Grip Handle
Used for splitting matting surfaces
Used for leveling machinery and structures before fixing in place
Forged and ground blade with fine edge for easy entry
Correctly heat-treated to best suited product application
Klein Tools soft-faced steel sledge hammer has a pinned head to prevent
it from coming off. A thick fiberglass handle with an oil-resistant rubber
coating absorbs the shock of sledge blows.
5FW10025
Mfr.’s Model No.
UPC#
Description
5FW07538
5FW10025
5FW17550
7FW27050
7FWSS10025
09264446879-7
09264446880-3
09264446881-0
09264446963-3
09264446964-0
Steel, 3" Length, 1/2" Thickness
Steel, 11" Length, 1" Thickness
Stainless Steel, 4" Length, 5/16" Thickness
t A soft-faced sledge hammer for heavy applications where risk of chipping
must be minimized
t Head is forged from high-tensile steel then normalized to give a softer face
that is less likely to chip
t Head is pinned and epoxied to handle to prevent it from coming off
t Normalized striking face has hardness below 20HRC
t A thick-cored fiberglass handle for extra strength with a non-slip,
oil-resistant rubberized coating
t Large sweep at base to prevent grip loss
t Comfortable, thick rubber grip gives better protection from shock and vibration
t Correctly heat-treated to best suit product application
Klein Tools Wire Rope Punch
Klein Tools wire rope punch allows you to safetly and effectively drive
pins and keys out of machinery. The wire rope design
absorbs the shock of the sledge hammer blow.
Mfr.’s Model No.
UPC#
Description
7WRP13
7WRP16
7WRP19
7WRP22
7WRP25
7WRP32
09264446279-5
09264446280-1
09264446281-8
09264446282-5
09264446283-2
09264446284-9
1/2" Diameter
5/8" Diameter
3/4" Diameter
7/8" Diameter
1" Diameter
1-1/4" Diameter
7WRP13
Klein Tools Sledge Hammer —
Pinned Fiberglass Rubber Grip Handle
Klein Tools sledge hammer has a pinned head to prevent it from coming
off. A thick fiberglass handle with an oil-resistant rubber coating absorbs
the shock of sledge blows.
t Forged from tough, high-tensile steel with hardened and tempered faces
t Head is pinned and epoxied to the handle to prevent it from coming off
t Thick handle with large sweep at base to prevent loss of grip
t Comfortable, thick rubber grip for better protection from shock and vibration
Mfr.’s Model No.
UPC#
Description
7HSNFRH04
7HSNFRH07
7HSNFRH10
7HSNFRH14
09264446977-0
09264446978-7
09264446979-4
09264446980-0
4 lb. Head Weight
7 lb. Head Weight
10 lb. Head Weight
14 lb. Head Weight
Klein Tools Brass Sledge Hammer —
Fiberglass Rubber Grip Handle
Klein Tools brass sledge hammer has a pinned head to prevent it from
coming off. A thick fiberglass handle with an oil-resistant rubber coating
absorbs the shock of sledge blows.
t
t
t
t
t
Used in non-sparking enviroments or to avoid damage to struck objects
Head forged from brass for softer, non-damaging blow
Head is pinned and epoxied to handle to prevent it coming off
Comfortable, thick rubber grip handle for better protection from shock and vibration
Handle includes both overstrike protection and large sweep at base to
prevent loss of grip
7HBRFRH14
Mfr.’s Model No.
UPC#
Description
7HBRFRH04
7HBRFRH07
7HBRFRH10
7HBRFRH14
09264446965-7
09264446966-4
09264446967-1
09264446968-8
4 lb. Head Weight
7 lb. Head Weight
10 lb. Head Weight
14 lb. Head Weight
5HDFRH04400
Mfr.’s Model No.
UPC#
Description
5HDFRH04400
5HSFRH07
5HSFRH10
5HSFRH14
5HSFRH28
09264446895-7
09264446896-4
09264446897-1
09264446898-8
09264446899-5
4 lb. Head Weight
Rubber Grip Handle, 7 lb. Head Weight
103
t Used to safely drive out pins and keys in machinery
t Long, two-handed rubber handle
to lessen shocks from blows
t Head attached with
wire rope to reduce shock
t Urethane ring around head to reduce likelihood of chipping
t Heat-treated punch, so it will not shatter
7HSNFRH14
Fish Tapes, Fish Poles, Fish Sticks
Greenlee® Nylon Fish Tapes
Greenlee® Steel Fish Tapes
Co-extruded, curl-resistant nylon tape
fishes equally well in large or small conduit.
One-piece handle made of high-impact
nylon for maximum durability and easy,
comfortable use.
t One-piece handle constructed of
high-impact nylon for long life
and easy, comfortable use
t Feature heavy-duty winder case
t Tape is 3/16" wide, and reel is
12"w in diameter
FTN536-50
Mfr.’s Model No.
Description
FTN536-50
FTN536-100
12" Diameter Reel; Tape Length: 50'
Greenlee® Fiberglass Fish Tapes
Mfr.’s Model No.
Description
FTS438-65
FTS438-125
FTS438-240
Rust- and corrosion-resistant.
t Unique noncoiling properties
enable fishing in large or
small conduit, even with wire
or cable in place
t Fastest manual
fish tape available
t Reel diameter is 12"
FTF540-50
t SPEED FLEX™ leader silver-soldered
onto the fish tape
t High-impact nylon, one-piece handle
for maximum durability
t Large handle grip for greater control
t Self-tensioning case for
easy tape winding
Mfr.’s Model No.
Description
Mfr.’s Model No.
Description
FTF540-50
FTF540-100
542-250
1/8"W Tape; 12" Diameter Reel; Tape Length: 50'
(in reel stand)
FTSS438-100
FTSS438-200
Dimensions: 100' x 1/8" x 0.060"
Dimensions: 200' x 1/8" x 0.060"
Greenlee® Fish Poles and Glo Stix®
t 200-lb. maximum pulling strength
FP24
FP18
Mfr.’s Model No.
Description
FP3
FP12
FP18
FP24
3' Fish Pole
12' Fish Pole; Collapsed Length: 26"
FP12
FTSS438-100
Greenlee® EZ Reach™ Fish Stix Kits
Highly visible green rods can be
easily threaded together.
t 1/4" diameter fiberglass rods
provide added rigidity when
multiple sections are connected
t 200-lb. minimum
pulling strength
540-24
t Two different
threaded tips available
t Glo Stix™ version —
a luminescent fiberglass pole
for better visibility
Mfr.’s Model No.
Description
540-12
540-24
540-6
540-15
12' Kit with Bullet Nose and “J” Hook Threaded Tips
24' Kit with Bullet Nose and “J” Hook Threaded Tips
5/32" Diameter — 6' Kit with Fixed Bullet Nose on Both Ends
3/16" Diameter — 15' Kit with Bullet Nose and “J” Hook
Threaded Tips
5/32" Diameter — 18' Kit with Bullet Nose
540-18
104
FTS438-125
Greenlee® Silver Streak®
Stainless Steel Fish Tapes
Exclusive, lightweight reel for easy,
positive feed-out and rewind.
t Self-tensioning case makes
tape winding easy
t Impact-resistant rewinder case has
viewports to ensure tape fit
t Interior retaining strap holds tape secure
t Dirt-free tape finish
t Tempered steel tape is 1/8"W
Hole Saws, Knockout Punches
Greenlee® 12" Bi-Metal Hole Saws
Cut through steel, tin, aluminum, fiberglass, wood, and plastic.
t
t
t
t
t
Deep 1-5/8" (41.3mm) cutting depth enables cutting through 2" x 4" wood studs
Extra-tough M42 alloy blade made from the highest grade of tool steel
M42 blade eliminates premature saw replacement and saves you money
Steam oxide finish — no paint to gum up and slow cutting
Finish enables the saw to run cooler for longer life and better performance
t Extra-thick backplate minimizes vibration for
smoother, easier, less-tiring cutting
t Made in U.S.A.
825-1-7/16
Description
Mfr.’s Model No.
Description
Mfr.’s Model No.
Description
825 9/16
825-5/8
825-11/16
825-3/4
825-13/16
825-7/8
825-15/16
825-1
825-1-1/16
825-1-1/8
825-1-3/16
825-1-1/4
825-1-5/16
825-1-3/8
825-1-7/16
825-1-1/2
825-1-9/16
825-1-5/8
Actual Hole Size: 9/16" (14.3mm)
Actual Hole Size: 1" (25.4mm)
Actual Hole Size: 1-1/16" (27.0mm)
825-1-11/16
825-1-3/4
825-1-13/16
825-1-7/8
825-2
825-2-1/16
825-2-1/8
825-2-1/4
825-2-5/16
825-2-3/8
825-2-1/2
825-2-9/16
825-2-5/8
825-2-3/4
825-2-7/8
825-3
825-3-1/8
825-3-1/4
825-3-3/8
825-3-1/2
825-3-5/8
825-3-3/4
825-3-7/8
825-4
825-4-1/8
825-4-1/4
825-4-3/8
825-4-1/2
825-4-3/4
825-5
825-5-1/2
825-6
825-68
825-74
Greenlee® Variable Pitch Bi-Metal Hole Saw Kits
t Provide an assortment of the most commonly used cobalt steel
variable pitch hole saw sizes and arbors
t High-impact, rugged plastic carrying case
835
Description
830
No. of Sizes: 6, Min. Hole: 7/8", Max. Hole: 2-1/2", Conduit/
Pipe Min: 1/2", Conduit/Pipe Max: 2"
No. of Sizes: 10, Min. Hole: 7/8", Max. Hole: 4-1/2",
Conduit/Pipe Min: 1/2", Conduit/Pipe Max: 4"
No. of Sizes: 6, Min. Hole: 3/4", Max. Hole: 2-1/4"
889
Packed in a high-impact,
rugged plastic carrying case.
t Assortment of commonly used Slug-Buster®
knockout punches for easy slug removal
830
Mfr.’s Model No.
835
Greenlee® Slug Buster® Manual Knockout Punch Kits
7235BB
7237BB
Mfr.’s Model No.
Description
7235BB
Kit with 4 Sizes of Punches; Conduit/Pipe KO Min.: 1/2",
Conduit/Pipe KO Max.: 1-1/4"
Kit with 6 Sizes of Punches; Conduit/Pipe KO Min.: 1-1/2",
Conduit/Pipe KO Max.: 2"
7237BB
Greenlee® Slug Buster® Manual Knockout Kit with Ratchet Wrench
Packed in a high-impact, rugged plastic carrying case.
t Assortment of six sizes of commonly used Slug-Buster® round knockout punches for easy slug removal
t Includes a 1" hex ratchet wrench for use with 3/8" (9.5 mm) and 3/4" (19.1 mm) draw studs
7238SB
Mfr.’s Model No.
Description
7238SB
Kit with 6 Sizes of Punches; Conduit/Pipe KO Min.: 1/2", Conduit/Pipe KO Max.: 2"
105
Mfr.’s Model No.
Knockout Punches, Analyzers, Testers
Greenlee® Ram and Hand Pump Hydraulic Driver Kit
Greenlee® Standard —
Quick Draw® Flex Driver Kit
Compact design for field use at construction
sites and on maintenance jobs.
Compact, lightweight
design for portability
and fast, easy
one-person operation.
t
t
t
t
Powerful 11-ton hydraulic ram
Fast and simple to operate
Able to drive 751 Cable Cutter head
Can be used with most standard round
Slug-Buster® and Slug-Splitter SC™ punches
(not 1/2", 9/16", or 5/8")
t Also can be used with non-round punches
(adapter may be required)
t Kit includes driver, hand pump, Slug-Buster®
Punches, dies and draw studs, adapter,
spacers, Kwik Stepper®
Step Bit, 3' hose, and case
t Develops eight tons of hydraulic force for easy
punching, even in ten-gauge stainless steel
t Perfect for fast, straight-on
7706SB
front panel punching
t Enables unlimited
positioning
of driver
7310SB
Mfr.’s Model No.
Description
7306SB
7310SB
Conduit Sizes: 1/2" through 2", Plastic Case
Conduit Sizes: 1/2" through 2" and 2-1/2" through 4", Steel Case
Fluke® 430 Series II Power Quality
and Energy Analyzer
Mfr.’s Model No.
Description
7706SB
Driver with 1/2–2" Slug-Buster® Conduit
Size Punches and Dies, 2 Draw Studs,
1 Adapter, 1 Spacer, and Case
Fluke® 190 Series II
ScopeMeter® Test Tool
The new 430 Series II Power Quality and
Energy Analyzers offer the best in power
quality analysis and introduce, for the
first time ever, the ability
to monetarily quantify
energy losses.
FLUKE 190-104
t Power inverter efficiency
simultaneously measures AC output power
and DC input power for power electronics systems using optional DC clamp
t PowerWave captures RMS data, show half-cycle and waveforms to characterize
electrical system dynamics (generator start-ups, UPS switching etc.)
t Classic active and reactive power measurements, unbalance and harmonic power, are
quantified to pinpoint the fiscal costs of energy losses
t Troubleshoot in real-time and analyze the trends using the cursors and zoom tools
t Highest safety rating in the industry — 600 V CAT IV/1000 V CAT III rated
for use at the service entrance
t Four flexible current probes with enhanced thin flex design are included
to fit into the tightest places
t Every measurement is always automatically recorded, without any setup
t Ten power quality parameters on one screen,
according to EN50160 power quality standard
t Configure for any test condition with memory for
up to 600 parameters at user defined intervals
t Seven hours operating time per charge
on Li-ion battery pack
Mfr.’s Model No.
UPC#
Description
FLUKE-434-II
FLUKE-435-II
0 95969 61553 2
0 95969 61556 3
Three-Phase Power Quality Analyzer
Three-Phase Power Quality Analyzer
106
t Measure input, output, and
FLUKE 190-204
feedback loops simultaneously
t Safely troubleshoot three-phase systems like
variable-speed drives, UPS, or back-up generators
t Four independent isolated inputs, up to 1000V
t High-speed sampling — up to 2.5 GS/s
t Deep memory — 10,000 points per trace waveform capture
t Connect-and-View™ triggering for intelligent, automatic triggering
on fast, slow, and complex signals
t Automatic capture and replay of 100 screens
t 30,000 points or more per input channel using ScopeRecord™ roll mode
t TrendPlot™ Paperless recorder with deep memory for
long-term automatic measurements
t CAT III, 1000V; CAT IV, 600V rated
Mfr.’s Model No.
Description
FLUKE 190-104
FLUKE 190-104/S
FLUKE 190-204
FLUKE 190-204/S
100-MHz Bandwidth ScopeMeter
100-MHz Bandwidth ScopeMeter with SCC290 Kit
200-MHz Bandwidth ScopeMeter
200-MHz Bandwidth ScopeMeter with SCC290 Kit
Testers, Calibrators, Thermal Imagers, IR Windows
Fluke® 810 Vibration Tester
t On-board identification and
location of the most common
mechanical faults focus
maintenance efforts on root cause
t Fault severity scale with four
severity levels helps you prioritize
maintenance work
t Repair recommendations advise
technicians on corrective action
t On-board context sensitive help
FLUKE-810
provides real-time tips and guidance to new users
t 2 GB expandable on-board memory provides enough space for your machinery’s data
t Self-test function ensures optimal performance and more time on the job
t Laser tachometer for accurate machine running speed promotes confident diagnoses
t Tri-axial accelerometer reduces measurement time
by 2/3 over single axis accelerometers
t Viewer PC Software expands data storage
and tracking capacity
Mfr.’s Model No.
Description
FLUKE-810
FLUKE-810, Machine Rotational Speed Range, 200 to 12,000
RPM, 2.5 to 50 kHz Electrical Sampling Rate
The lightest, most rugged and easiest-to-use
professional thermal imager has now arrived.
Perform infrared inspections faster and more
efficiently with the Ti125 Thermal Imager.
t Exclusive IR-OptiFlex focus system ensures that
images are in good focus from 4' and beyond for
optimum image clarity and scanning convenience
t IR-PhotoNotes identifies and keeps track of
inspection locations by adding images of important
information and surrounding areas
t IR-Fusion® with AutoBlend™ mode accurately
identifies potential issues by combining digital and
IR images with AutoBlend
t IR-Fusion® with AutoBlend™ blends digital and
partially transparent IR images into a single
information-filled image
t Multi-mode video recording — focus-free video in
visible light and infrared with full IR-Fusion
t Easily communicate the location of problems with
the Electronic Compass (8-Point Cardinal)
Mfr.’s Model No.
UPC#
Description
FLUKE-Ti125
0 95969 56496 0
Image Frequency: 30 Hz
Fluke® 750 Series Documenting Process Calibrators
The 750 Series
Documenting Process
Calibrators are powerful
calibrators that let you
download procedures, lists,
and instructions created
with software, or upload
data for printing, archiving,
and analysis.
t Measure volts, mA, RTDs,
thermocouples, frequency,
and ohms to test sensors,
FLUKE-754
FLUKE-753
transmitters, and
other instruments
t Power transmitters during test using loop supply
with simultaineous mA measurement
t Measure/source pressure using any of 29 Fluke 700Pxx Pressure Modules
t Create and run automated as-found/as-left procedures to satisfy quality programs
or regulations (record and document results)
t Holds up to a full week of downloads procedures and calibration results
t Three-year warranty
t 754 supports popular models of HART transmitters,
with more device-specific command support than
any other field calibrator
t Built-in HART® interface capable of performing nearly
all the day-to-day tasks you now perform with a separate communicator
Mfr.’s Model No.
UPC#
Description
FLUKE-754
FLUKE-753
0 95969 49175 4
0 95969 59040 2
Documenting Process Calibrator
Documenting Process Calibrator,
Non Bus
Fluke® CLKTO IR Window for Indoor
Medium-Voltage Applications
Inspect your indoor switchgear safely with
the latest IR Window from Fluke. If you are
concerned about arc-flash or electrocution
risk, this latest C-Range IR Window can help
increase the safety of your personnel and
reduce the cost of predictive maintenance,
in compliance with indoor switchgear codes.
t Impact resistant viewing pane compliant to
ANSI C37.20.2 for indoor switchgear up to 72 kV
t CLKTO IR Windows from Fluke use the unique Quadraband™ multispectral optic,
allowing inspection with any camera for total flexibility both now and in the future.
t Certified by UL® and CSA as suitable for Type 1 (Indoor) environment in
North America, these C-Range windows are tested to withstand the long-term
aging effects of UV exposure
t The CLIRVU® coating — exclusive to Fluke Windows — seals the optic prior
to assembly to protect against moisture degradation
t Own a Fluke Camera? The Quadraband™ optic is IR-Fusion® compatible, allowing the
thermographer to see potential problems in visual light and thermographic mode
t The CLKTO IR Window incorporates a revolutionary, impact-resistant viewing pane
compliant with indoor switchgear regulations C37.20.2. For the first time, your Fluke
IR Window allows visual inspection of your switchgear even with the cover closed
t Identification plate attached for unique, onsite numbering
for rapid location confirmation and faster repairs
t Each infrared window comes complete with a
security access key, installation instructions and
self-adhesive drilling template
Mfr.’s Model No.
UPC#
Description
FLK-075-CLKTO
0 95969 49608 7
3" (75mm) C-Range, Indoor Medium
Voltage, IR Window, Kwik Twist
107
Fluke® Ti125 Industrial-Commercial
Thermal Imager
Particle Counter, Pressure Calibrators, Multimeter
Fluke® 985 Particle Counter
Fluke® 718Ex Intrinsically Safe Pressure Calibrator
With its easy-to-read and fully configurable channel
display, lightweight yet rugged form, and highly
accurate measurements, the Fluke 985 is the perfect
tool for the maintenance, HVAC, and IAQ professionals.
The new Fluke 718Ex Intrinsically Safe Pressure Calibrator is a new,
powerful intrinsically safe, self contained pressure calibrator for usage
in explosion-endangered areas.
t 6 channels, 0.3 μm – 10 μm in particle size measurement
t Rugged, ultra-lightweight and ergonomic design for
convenient single-hand operation
t Fully configurable with large 3.5" QVGA color display with
backlight and intuitive icons for easy navigation and viewing
t In-device storage of 10,000 records for easy access
to historical data
t Traditional tabular particle counts or trend graph
for particle viewing
t USB and Ethernet enabled for data export to memory stick
or PC (no special software required)
t Ideal for troubleshooting and monitoring
indoor air quality issues and verifying HVAC filter
performance in critical locations
Mfr.’s Model No.
UPC#
Description
FLUKE-985
0 95969 62032 1
6 Size Channels
Fluke® 700G Precision Pressure Gauge Calibrator
Fluke’s new 700G Series Precision Pressure Gauge Calibrators are built
with state-of-the-art measurement, I.S. rating, and rugged durability that
you expect from Fluke. Paired with the Fluke-700PTPK Pneumatic Test Kit
or the Fluke-700HTPK Hydraulic Test Kit you’ll have a complete pressure
gauge calibration solution at your finger tips.
t Nine models ranging from 15 to 10,000 psi
t Bright backlit display for easy viewing of
pressure measurements
t Rugged, durable design with protective holster
t High accuracy, 0.05% total measurement
uncertainty for one year
t Combined with either the 700PTPK pneumatic
pump kit or the 700HTPK hydraulic pump kit for a
complete measurement and testing solution
t Demand measurement logging to a PC or to internal
memory with 700G/TRACK software
t Work safely in classified areas known to
include explosive gasses;
- CSA: Class 1, Div2, Groups A-D rating
- ATEX: rating II 3 G Ex nA IIB T6
t Three-year warranty promises long term value for
the investment
Mfr.’s Model No.
UPC#
Description
FLUKE-700G04
FLUKE-700G05
FLUKE-700G06
FLUKE-700G07
FLUKE-700G08
FLUKE-700G27
FLUKE-700G29
FLUKE-700G30
FLUKE-700G31
0 95969 61100 8
0 95969 61105 3
0 95969 61106 0
0 95969 61108 4
0 95969 61109 1
0 95969 61107 7
0 95969 61110 7
0 95969 61111 4
0 95969 61112 1
Pressure Gauge, 15 psig
Pressure Gauge, 1,000 psig
108
The Fluke 718Ex offers:
t ATEX II 1G Ex ia IIC T4 Compliant
t Built-in pressure/vacuum hand pump,
with fine adjust vernier and bleed valve
t 30, 100, and 300 psi ranges (2, 7, and 20 bar)
t Pressure measurement to 0.05% of full span,
using an internal pressure sensor
t Pressure measurement to 200 bar using any of
eight intrinsically safe Fluke 700PEx Pressure Modules
t Wide range of selectable measurement units for pressure
t Current measurement with 0.02% accuracy and 0.001 mA resolution
t Pressure switch test function
t Min/Max Hold functions
t Compact size and weight
t Simple, push-button user interface
t Rugged and reliable, ideal for field use
Mfr.’s Model No.
UPC#
Description
FLUKE-718EX 100
FLUKE-718EX 30
FLUKE-718EX 300
0 95969 24165 6
0 95969 24164 9
0 95969 41386 2
I.S. Pressure Calibrator 100 psig
Fluke® 28 II Rugged IP 67 Industrial Multimeter
The 28 II digital multimeter defines a new standard for operating in harsh
conditions, with the features and accuracy to troubleshoot most electrical
problems. IP 67 (waterproof and dustproof) rating, MSHA approvals
(pending), extended operating temperature range of -15° C to + 55°C (5°F
to 131°F) and 95% humidity, and a 3-meter (10 ft.) drop. The new Fluke
20 series multimeters are built to work in the toughest environments.
t
t
t
t
t
t
t
t
t
t
t
Measure up to 1000 VAC and VDC
Measure up to 10 A (20 A for 30 seconds)
10,000 uF capacitance range
Frequency to 200 kHz
Extended AC voltage bandwidth — 15Hz to 20kHz
Built in thermometer conveniently allows you to take
temperatures readings without having to carry
a separate instrument
Resistance, continuity, and diode test
Min/Max and average recording to capture
variations automatically
True RMS ac voltage and current
Unique function for accurate voltage and frequency
measurements on adjustable speed motor drives and
other electrically noisy equipment
Available in an intrinsically safe model (shown)
Mfr.’s Model No.
UPC#
Description
FLUKE-28II
0 95969 46171 9
TRMS Multimeter
Heaters
TPI® Hazardous Location Wall Convection Heaters
Single & three-phase electric wall-mounted convectors.
t For use in areas that require washing or hosing of equipment due to dirty or dusty
environments in hazardous location areas
t Rated for Class I, Groups B, C, & D, Division 1 & 2, are NEMA 4 washdown rated,
and have a temperature rating of 536º F (280º C)
t ETL C/US Listed for indoor commercial and industrial heating applications in
hazardous location rated areas
t Compact construction
enables operation in
corrosive environments
t Equipped with NEMA 4
cast aluminum
terminal enclosure
t Designed for
bottom air in
and front out airflow
distribution of heat output
FEP-18 FEP-36
t Supplied wall brackets
enable heaters to be
installed in a horizontal
operating position on
all types of wall surfaces
TPI® Hazardous Location Electric Fan-Forced
Unit Heaters
For rugged industrial applications in hazardous locations where the
possibility of explosion or fire exists due to the presence of certain
flammable gases, vapors, powdered metals, or dust.
t Rated for Class I, Groups C & D, Division 1 & 2, and Class II, Groups E, F, & G,
Division 1 & 2
t ETL C/US Listed for indoor commercial and industrial heating applications in
hazardous location rated areas
t 14-gauge steel cabinet design with an epoxy powder-coated gray finish contains
heater core, motor, and fan assembly
t Permanently sealed, liquid to air,
finned-tube heat exchanger core
t Ethylene glycol to water
mixture uses a heat transfer
fluid in the heater core,
providing -49° F
(-45° C) damage
protection
t Electrical Service:
480V, 3-Phase, 60Hz
t 24V Control Circuit System
FEP-76
Mfr.’s Model No.
Description
Mfr.’s Model No.
Description
FEP-1812-1RA
1800W, 6143 BTU, Single-Phase; 120V, 15.0A, 50 lbs.,
17.9"H x 8.3"W x 34"L
17.9"H x 8.3"W x 34"L
17.9"H x 8.3"W x 34"L
3600W, 12,286 BTU, Single-Phase; 208V, 17.3A, 64 lbs.,
17.9"H x 8.3"W x 34"L
17.9"H x 8.3"W x 34"L
3600W, 12,286 BTU, Three-Phase; 480V, 4.3A, 85 lbs.,
17.9"H x 8.3"W x 58"L
17.9"H x 8.3"W x 58"L
7600W, 25,938 BTU, Three-Phase; 480V, 9.1A, 85 lbs.,
17.9"H x 8.3"W x 58"L
HLA 12-480360-3.0-24
3000W, 12,250 BTU, 4.3A, 16.5° Temp. Rise,
580 CFM, 24' Air Throw, 167 lbs.
5000W, 17,150 BTU, 6.7A, 27.6° Temp. Rise,
7500W, 25,600 BTU, 9.7A, 41.4° Temp. Rise,
10,000W, 34,150 BTU, 12.7A, 21.7° Temp. Rise,
15,000W, 51,200 BTU, 19A, 19.2° Temp. Rise,
20,000W, 68,300 BTU, 25.1A, 26.2° Temp. Rise,
25,000W, 85,400 BTU, 31.1A, 32.8° Temp. Rise,
FEP-1820-1RA
FEP-1824-1RA
FEP-3620-1RA
FEP-3624-1RA
FEP-3648-3RA
FEP-7624-1RA
FEP-7648-3RA
HLA 12-480360-5.0-24
HLA 12-480360-7.5-24
HLA 16-480360-10.0-24
HLA 20-480360-15.0-24
HLA 20-480360-20.0-24
HLA 20-480360-25.0-24
109
HLA 12-480360
Heaters, Thermostats
TPI® Electric Washdown Fan-Forced Unit Heaters
Fan-forced unit heaters for use in areas that require washing or hosing of
equipment due to dirty or dusty environments in non-hazardous locations.
t Totally enclosed watertight construction and corrosion-resistant material make the
units ideal for industrial heating applications
t Housing material contains a heavy-duty 16-gauge type 304 stainless steel shroud
t ETL C/US Listed for indoor commercial and industrial heating applications
t NEMA 4X nonmetallic control panel attached to the bottom of the heater housing
t Include a built-in capillary style thermostat and disconnect switch
with enclosure door interlock device
t Equipped with automatic reset thermal cutout limits to
de-energize the heater should an over-temperature situation occur
t Factory wired with a 24V secondary control
system and 3-position switch (off-heat-fan)
t Electrical Service; 480V, 3-phase, 50/60-Hz
TPI® Optional Wall-Mounting
Explosion-Proof Thermostats
t Line voltage DPDT stat, 50–90° F temperature range
t Heating or cooling temperature devices,
Snap-action switches
t 1/2’ Aluminum casting encosure
t Fahrenheit and Celsius temperature scale
t 24-277VAC, 22-Amp max rating
t Class I and II, Groups C, D, E, F, and G
t NEMA Class 7, Division I approved
t EPET model has plastic temperature adjustment
knob and bi-metal room temperature sensor
t HLT model has screwdriver temperature adjustment
slot (contains no plastic) and external bulb with
capillary room temperature sensor
EPETD8D
HLT-2
Mfr.’s Model No.
Description
EPETD8D
HLT-2
24–480 VAC, 11 lbs.
24–277 VAC, 12 lbs.
TPI® Optional Wall-Mounting Brackets
P3P5503T (Front)
P3P5503T (Back)
Mfr.’s Model No.
Description
P3P5503T
3300W, 11,200 BTU, 4.0A, 400 CFM, 20' Air Throw,
26º Temp. Rise, 58 lbs., 19.8"H x 12"W x 18"L
10,000W, 34,130 BTU, 12.1A, 700 CFM, 28' Air Throw,
P3P5505T
P3P5507T
P3P5510T
P3P5515T
P3P5520T
P3P5525T
P3P5530T
110
HLWM37
W5520/WMK
Mfr.’s Model No.
Description
HLWM37
Bracket to Mount Hazardous Location Electric Unit Heaters;
for Use with 3.0–7.5kW Units, 27 lbs.
for Use with 10.0kW Units, 28 lbs.
for Use with 15.0–25.0kW Units, 29 lbs.
Bracket to Mount Electric Washdown Unit Heaters;
for Use with 3.3–15kW Units, 11 lbs.
Bracket to Mount Electric Washdown Unit Heaters;
for Use with 20–30kW Units, 12 lbs.
HLWM10
HLWM1525
W5520/WMK
W5550/WMK
Industrial Maintenance Supplies
In This Section
Sorbents ..................................... 112
Conveyer Belt Idlers ..................... 113
Degreasers ................................. 114
Cleaners ..................................... 114
Penetrating Solvents .................... 114
Lubricants ................................... 115
Sealants ...................................... 115
Insecticides ................................. 115
This is a
sampling of
the Industrial
Maintenance
Supplies that
WESCO offers.
111
111
INDUSTRIAL MAINTENANCE SUPPLIES
Sorbents
Brady® SPC Sorbents MRO Plus™ Universal Pads and Rolls
Sorbents help guard against the leaks, drips, and spills that create safety
and environmental hazards in the workplace.
t
t
t
t
Absorbs all industrial liquids (water, petroleum, and chemical-based fluids)
Three-ply construction makes it stronger, more durable, and reduces lint
Perforated
Gray color masks drips and spills
Mfr.’s Model No.
UPC#
Description
MRO100
MRO100-2
MRO50
MRO150DND
MRO300
MRO12P
MRO15
MRO15P
MRO15DP
MRO24DP
MRO30
MRO30P
MRO30DP
MRO315P
MRO350
MRO350DP
66270622101
66270622112
66270622103
66270622109
66270622128
66270621106
66270621111
66270621112
66270621134
66270621107
66270621113
66270621114
66270621136
66270621214
66270621196
66270621187
Heavyweight, All-Purpose Pad; Size: 15" x 19", Absorbency: 30 Gal./Bale, Pkg. Qty.: 100/Case
Heavyweight Half Pac; Size: 15" x 19", Absorbency: 15 Gal./Bale, Pkg. Qty.: 50/Bale
Jumbo Heavyweight Pad; Size: 30" x 30", Absorbency: 42 Gal./Bale, Pkg. Qty.: 50/Bale
100 Pads with Dispense-n-Dispose System; Size: 15" x 19", Absorbency: 44 Gal./Bale, Pkg. Qty.: 150/Case
Medium-Weight Pad; Size: 15" x 19", Absorbency: 24 Gal./Bale, Pkg. Qty.: 100/Case
Heavyweight Roll, Perforated Every 12"; Size: 12" x 150', Absorbency: 30 Gal./Bale, Pkg. Qty.: 1/Bale
New Efficient Heavyweight Width; Size: 15" x 150', Absorbency: 25 Gal./Bale, Pkg. Qty.: 1/Case
Heavyweight Roll, Perforated Every 18"; Size: 15" x 150', Absorbency: 25 Gal./Bale, Pkg. Qty.: 1/Case
Heavyweight Roll, Perforated Every 9" and Up Center; Size: 15" x 150', Absorbency: 25 Gal./Bale, Pkg. Qty.: 1/Case
Heavyweight Roll, Perforated Every 12" and Up Center; Size: 24" x 150', Absorbency: 39 Gal./Bale, Pkg. Qty.: 1/Bale
Heavyweight Roll, Full-Size Blanket; Size: 30" x 150', Absorbency: 50 Gal./Bale, Pkg. Qty.: 1/Case
Heavyweight Roll, Perforated Every 30"; Size: 30" x 150, Absorbency: 50 Gal./Bale, Pkg. Qty.: 1/Case
Heavyweight Roll, Perforated Every 15" and Up Center; Size: 30" x 150', Absorbency: 50 Gal./Bale, Pkg. Qty.: 1/Case
Medium-Weight Roll, Perforated Every 18"; Size: 15" x 150', Absorbency: 20 Gal./Bale, Pkg. Qty.: 1/Case
Medium-Weight Roll; Size: 30" x 150', Absorbency: 39 Gal./Bale, Pkg. Qty.: 1/Case
Medium-Weight Roll, Double Perforated; Size: 30" x 150', Absorbency: 30 Gal./Bale, Pkg. Qty.: 1/Case
Brady® SPC Sorbents ENV™ MAXX Enhanced Oil-Only Pads and Rolls
MAXX Technology — ounce for ounce a stronger, more absorbent product than the original ENV.
t
t
t
t
Contractor grade oil-only sorbent
Repels water and floats indefinitely — even when saturated
Low-cost industrial alternative
Equally effective on land or water
Mfr.’s Model No.
UPC#
Description
ENV100
ENV300
ENV200
ENV150
ENV50
ENV500
66270612048
66270616049
66270616053
66270611036
66270612064
66270683251
Heavyweight Economy Pad; Size: 15" x 19", Absorbency: 33 Gal./Bale, Pkg. Qty.: 100/Bale
Medium-Weight Economy Pad; Size: 15" x 19", Absorbency: 28 Gal./Bale, Pkg. Qty.: 100/Bale
Lightweight Economy Pad, Double Coverage; Size: 15" x 19", Absorbency: 37 Gal./Bale, Pkg. Qty.: 200/Bale
Medium-Weight Value Roll; Size: 30" x 150', Absorbency: 50 Gal./Bale, Pkg. Qty.: 1/Bale
Medium-Weight Pad; Size: 30" x 30", Absorbency: 55 Gal./Bale, Pkg. Qty.: 50/Bale
Lightweight Economy Pad; Size: 15" x 19", Absorbency: 26 Gal./Bale, Pkg. Qty.: 100/Bale
112
Conveyer Belt Idlers
Cooper Interconnect Limberoller
Flexible conveyor belt idlers offer time and maintenance savings.
t Limberollers provide continuous belt contact, eliminating unsupported
gaps or sharp angles in the belt as with steel idlers
t Limberollers are lightweight and can be easily handled when idler
replacement is required
t Sealed two bearing design is mounted away from contaiminants,
promoting longer bearing life
t Overmold material provides excellent resistance to heat when
hot materials are being conveyed
t Cushioned for a bumpless ride, preventing material spillage
regardless of angle, material slope angle, or speed of conveyor
t Limberoller idlers flex as they turn on their axis,
preventing material build-up on the belt
UPC#
Description
Mfr.’s Model No.
UPC#
Description
500984-289
X984-25
X984-12
X984-33A
X984-37A
X984-48A
X984-42A
500984-308
500984-349
500984-351
500984-353
500984-355
500984-290
500984-291
500984-292
500984-293
500984-309
500984-331
500984-314
500984-320
500984-338
500984-387A
500984-389A
500984-391A
500984-393A
500984-395A
X5525-4A
X5525-7A
X5525-8A
500984-483
500984-484
500984-485
520102-5
520102-7
520102-9
520102-11
525064-225
525064-53
525064-54
525064-55
525064-58
525064-59
66227520538
66227516896
66227516895
66227516898
66227516899
66227516901
66227516900
66227520543
66227520555
66227520557
66227520559
66227520561
66227520539
66227520540
66227520541
66227520542
66227520544
66227520549
66227520545
66227520547
66227520551
66227520570
66227520572
66227520574
66227520576
66227520578
66227514562
66227514564
66227514565
66227584569
66227586081
66227590659
66227521229
66227521230
66227521231
66227521227
66227596546
66227589825
66227521254
66227521256
66227596547
66227521258
16" Trougher LR100 Series
18" Return LR106 Series
20°, 16" Oarlock Bracket
525064-63
525064-64
525064-65
525064-66
525064-68
525064-69
525064-70
525064-71
525064-73
525064-74
525064-75
525064-76
525064-244
525064-79
525064-80
525064-81
525064-84
525064-85
525064-86
525064-89
525064-90
525064-91
525064-94
525064-95
525064-96
525064-99
525064-100
525068-13
525068-17
525068-21
525068-22
525068-25
525068-26
525068-29
525068-30
525068-33
525068-37
525068-38
525068-41
525068-42
525068-49
525068-50
66227588520
66227521261
66227521263
66227521265
66227596548
66227596549
66227596550
66227596551
66227596552
66227521270
66227521272
66227521274
66227596907
66227521278
66227521280
66227521282
66227596554
66227523960
66227596014
66227589177
66227596555
66227595406
66227596556
66227596557
66227595382
66227597184
66227596544
66227586734
66227596591
66227590658
66227596592
66227596593
66227596654
66227521300
66227596655
66227521301
66227521303
66227596657
66227594076
66227596658
66227596660
66227596661
25°, 18" Training Bracket
Mfr.’s Model No.
113
CRC® Lectra Clean® Heavy Duty
Electrical Parts Degreaser
CRC® Contact Cleaner
2000® Precision Cleaner
CRC Lectra Clean® quickly
and effectively removes
grease, oil, tar, dirt, grime,
corrosion, sludge, and other
stubborn substances to
increase operating efficiency
of electric motors and
equipment. Lectra Clean®
evaporates quickly and
leaves no residue.
CRC Contact Cleaner 2000® Precision Cleaner
is an aggressive general purpose precision
cleaner that effectively removes dirt, light oils,
and other contaminants. It evaporates quickly,
leaves no residue, and has no flash or fire point.
t NSF K1 Registered for use
in meat and poultry plants
t No flash or fire point, making
02018
it an excellent alternative
to 1,1,1-based cleaning products
t Non-corrosive, non-staining and non-conductive
t Evaporates rapidly to minimize downtime
t
t
t
t
t
Description
078254020181
Heavy Duty Electrical Parts Degreaser,
20-oz. Aerosol
Heavy Duty Electrical Parts Degreaser,
1-Gallon Bottle
Mfr.’s Model No.
UPC#
Description
03150
078254031507
Precision Contact Cleaner, 16-oz. Aerosol
CRC Knock’er Loose® Penetrating Solvent is an industrial strength,
low-viscosity lubricant and penetrant designed to quickly loosen
and free seized, bound, or frozen fasteners. It quickly dissolves
rust, scale, gum, grease, and corrosion.
For energized equipment use only.
t
t
t
t
CRC HydroForce Zero VOC
General Purpose Cleaner
®
03150
CRC® Knock’er Loose® Penetrating Solvent
UPC#
02018
078254020204
NSF K2 Registered for use in meat and poultry plants
No Class I or Class II ODC’s
Non-conductive and non-corrosive
Test on plastics
Not for use in CA
(In CA, use VOC compliant formula part #02240)
02020
Mfr.’s Model No.
02020
Degreasers, Cleaners, Penetrating Solvents
®
CRC HydroForce®
Zero VOC General
Purpose Cleaner
provides maximum
regulatory compliance
without performance
compromises and is
formulated with a special
polymer that keeps dirt
and greasy soils from
returning.
NSF H2 Registered for use in meat and poultry plants
Lubricating residue prevents corrosion from returning
VOC Compliant formula
Eases disassembly of machinery and equipment for routine maintenance and repairs
14446
t
t
t
t
t
NSF A1 Registered for use in meat and poultry plants
Biodegradable
Plastic safe
Non-Abrasive, Non-Flammable, and Non-Corrosive
Floor wax safe
14447
Mfr.’s Model No.
UPC#
Description
14446
078254144467
14447
078254144474
Zero VOC General Purpose Degreaser,
32-oz. Trigger Spray Bottle
Zero VOC General Purpose Degreaser,
1-Gallon Bottle
114
03020
03021
03025
Mfr.’s Model No.
UPC#
Description
03020
03021
03025
078254030203
078254030210
078254030258
Penetrating Solvent, 16-oz. Aerosol
Penetrating Solvent, 1-Gallon Bottle
Penetrating Solvent, 8-oz. Spout Can
Lubricants, Sealants, Insecticides
CRC® RTV Silicone Sealant — Clear
CRC® Nickel Anti-Seize and
Lubricating Compound
CRC® Room Temperature Vulcanizing
(RTV) Adhesive/Sealant is designed
for a wide range of sealing, bonding,
protecting, and waterproofing
applications. Clear RTV Silicone is used
for general purpose applications.
Nickel-based formulation that is
free of copper, lead, sulfides, and
chlorides. Protects metal-to-metal
applications from seizing and galling
caused by high temperatures,
heavy loads, vibration, chemicals,
and corrosion. Safe for use on both
ferrous and non-ferrous metals.
t Chemically inert nickel formulation is safe
for use on most chemicals that are unstable
with copper
t High temperature resistivity protects parts
up to 2400°F
t Electrically conductive — does not insulate
or interrupt current flow
t Does not compromise the integrity of soft metals
t Will not harden — heat aging won’t affect
lubricity of product
t Resistant to mild detergents and alkaline wash
to protect against rust and corrosion
SL35911
t Shows little change in physical appearance after
exposure to rain, snow, temperature extremes,
and weathering
t Clear silicone forms a barely visible watertight seal
t Cures at room temperature — no special curing
methods required
14055
14073
Mfr.’s Model No.
UPC#
Description
14055
14073
078254140551
078254140735
RTV Adhesive/Sealant, 8-oz. Tube
RTV Adhesive/Sealant, 12-oz. Cartridge
CRC® Wasp & Hornet Killer
PLUS™ Insecticide
Mfr.’s Model No.
UPC#
Description
SL35911
072213359114
SL35913
072213359138
Nickel Anti-Seize & Lubricating Compound,
8-oz. Brush-Top Bottle
Nickel Anti-Seize & Lubricating Compound,
16-oz. Brush-Top Bottle
CRC® Minute Mend™ Epoxy Putty
CRC Minute Mend™ Epoxy Putty permanently repairs
scratches, gouges, and holes in drums, tanks, pipes,
castings, molds, sinks, tubs, and leaky gaskets. Ideal
for stopping leaks, it can even be used under water.
Specially formulated to bond to both wet and dry surfaces
A two-part epoxy putty packaged in a convenient one-piece stick
Ready to use in less than one minute
Can be tapped, sawed, drilled, machined, stained, or painted
CRC Wasp & Hornet Killer PLUS™ Insecticide
is a fast-acting, high-strength insecticide that
knocks down and kills wasps, hornets, fire ants,
black widow spiders, and scorpions on contact.
Safe on most plastics; non-chlorinated.
t CRC trigger provides a dense, accurate spray that will reach over
20 feet to drench harmful insects and their nests
t High dielectric strength of 47,600 volts
t Extension tube doubles as a locking mechanism
t Only wasp & hornet killer in the industry with CRC’s S.D.[L]™,
SDS printed on the reverse side of the product label
14010
Mfr.’s Model No.
UPC#
Description
14010
078254140100
Wasp & Hornet Insecticide, 20-oz.
Aerosol Trigger
Not registered outside of the United States and Puerto Rico.
14070
Mfr.’s Model No.
UPC#
14070
14071
078254140704 Epoxy Putty, 4-oz. Stick
078254140711 Epoxy Putty, 2-oz. Stick
Description
115
SL35913
t
t
t
t
WESCO sources and delivers the products
and services you need — no matter what they are —
no matter where you are located.
streamline your procurement process
Integrated Supply Services
reduce your total supply chain cost
WESCO is a leading provider
of integrated supply services
for MRO products in the
United States. By outsourcing
your procurement and
materials management
functions to WESCO, you can
significantly reduce operating
expenses and lower your total
cost of procurement.
The Benefits of Integrated
Supply
Comprehensive Integrated
Supply Capabilities
Procurement, stocking, and the administrative
functions associated with the purchase and
consumption of MRO (maintenance, repair,
and operations) supplies can be cost-intensive.
As more companies seek to reduce costs
and improve operating efficiency, they look at
integrated supply services as a potential solution.
By streamlining procurement and materials
management processes, companies can:
s Better manage cost-reduction initiatives
for indirect products and services
s Reduce labor, administrative,
and product costs
s Install customer-driven B2B tools
s Improve management controls and
optimize procurement decisions
s Improve product availability
and on-time deliveries
s Increase overall productivity
WESCO has long been recognized for the
abilities of our local Branches to quickly and
cost effectively source a wide array of electrical
and general MRO products. To support more
complex customer programs, such as tool
crib and warehouse management, we have
enhanced and expanded our integrated
supply capabilities with specialized operating
groups, including WESCO Integrated Supply
and Sourcing and Procurement Services
(SPS). We have also implemented specialized
Supplier programs that enable our customers to
consistently deliver low-cost energy services.
As the industry’s leading provider of integrated
supply services, WESCO can be your single
source for millions of electrical and nonelectrical
industrial and maintenance supply products.
WESCO — Your MRO
Supply Partner
WESCO has the flexibility to provide customized
MRO sourcing solutions to meet your company’s
unique needs. Using advanced electronic
procurement and inventory replenishment
systems and on-site materials management
and logistics services, we design and implement
programs to significantly reduce your total
supply chain costs. More importantly, we deliver
documented savings year over year, while
improving supply chain performance.
s WESCO Integrated Supply
WESCO Integrated Supply develops
cost-effective integrated supply (IS) programs
for MRO products in North America, Europe,
and Asia.
s Sourcing and Procurement
Services (SPS)
WESCO SPS specializes in providing
procurement services for the global energy
industry, with proven abilities to locate any
product, anywhere, and deliver it in the
fastest way possible to customers around
the world.
s Customized Programs
WESCO implements strategic business
relationships that often include specific
programs focused on inventory and
transaction cost reductions and vendormanaged inventory (VMI) programs.
For more information on WESCO’s Integrated Supply Services,
call or visit your local Branch, or log on to www.wesco.com
116
Data Communications
In This Section
Link/Repeaters ............................ 118
Switches ..............................118–120
This is a
sampling of the
Data Communications
products that
WESCO offers.
117
117
DATA COMMUNICATIONS
Link/Repeaters, Switches
GarrettCom® Dymec™ Link/Repeaters
Built to operate continuously in -40° to +85° C temperature extremes.
t Packaged in rugged, industrial-quality Galvaneal shells
t Withstand EMI and RFI
t Conformal coating — choose either standard light-duty coating (5 mil)
for humid conditions or optional heavy-duty coating (8 mil) for
corrosive environments
Mfr.’s Model No.
Description
5843HRT R
5843SHRT R
5844HRT-H R
5844HRT-L R
5844SHRT-H R
5844SHRT-L R
5845HRT R
5845SHRT R
5846HRT-H R
5846HRT-L R
5846SHRT-H R
5846SHRT-L R
CONFORM08-CR
RS-232 to Fiber Optic Link/Repeater, Includes (1) DB9 Female Connector, (1) Multimode ST® Fiber Connector, and 12-VDC Power Input
RS-232 to Fiber Optic Link/Repeater, Includes (1) DB9 Female Connector, (1) Single-Mode ST Fiber Connector, and 12-VDC Power Input
RS-232 to Fiber Optic Link/Repeater, Includes (1) DB9 Female Connector, (1) Multimode ST Fiber Connector, and 90–250-VAC/VDC Power Input
RS-232 to Fiber Optic Link/Repeater, Includes (1) DB9 Female Connector, (1) Multimode ST Fiber Connector, and 24–48-VDC Power Input
RS-232 to Fiber Optic Link/Repeater, Includes (1) DB9 Female Connector, (1) Single-Mode ST Fiber Connector, and 90–250-VAC/VDC Power Input
RS-232 to Fiber Optic Link/Repeater, Includes (1) DB9 Female Connector, (1) Single-Mode ST Fiber Connector, and 24–48-VDC Power Input
RS-422/485 to Fiber Optic Link/Repeater, Includes (1) DB9 Female Connector, (1) Multimode ST® Fiber Connector, and 12-VDC Power Input
RS-422/485 to Fiber Optic Link/Repeater, Includes (1) DB9 Female Connector, (1) Single-Mode ST Fiber Connector, and 12-VDC Power Input
RS-422/485 to Fiber Optic Link/Repeater, Includes (1) DB9 Female Connector, (1) Multimode ST Fiber Connector, and 90–250-VAC/VDC Power Input
RS-422/485 to Fiber Optic Link/Repeater, Includes (1) DB9 Female Connector, (1) Multimode ST Fiber Connector, and 24–48-VDC Power Input
RS-422/485 to Fiber Optic Link/Repeater, Includes (1) DB9 Female Connector, (1) Single-Mode ST Fiber Connector, and 90–250-VAC/VDC Power Input
RS-422/485 to Fiber Optic Link/Repeater, Includes (1) DB9 Female Connector, (1) Single-Mode ST Fiber Connector, and 24–48-VDC Power Input
Optional Heavy-Duty 8-mil Conformal Coating for Magnum Switch, Modules, Power Supply, and Interior PCBs
GarrettCom® Magnum™ 6KL Managed Edge Switches
DATA COMMUNICATIONS
Industrial Ethernet edge switches with full-featured MNS-6K software.
t
t
t
t
Configure up to 10 total copper and fiber ports maximum — and get up to Gigabit Ethernet speeds with optional SFPs
Highly configurable for all multimode and single-mode fiber port types
Advanced thermal design with heavy-duty aluminum case for heat dissipation (no fans); IP52 for environmental protection
Conformal coating — choose either standard light-duty coating (5 mil) for humid conditions or
optional heavy-duty coating (8 mil) for corrosive environments
t Panelmount brackets included
Mfr.’s Model No.
Description
6KL-AC
6KL-24V
6KL-48V
6KLP-48V
Magnum 6KL Configurable Managed Edge Switch Chassis with B and C Slots, (4) Included 10/100-Mbps Copper Ports, AC Power Supply
Magnum 6KL Configurable Managed Edge Switch Chassis with B and C Slots, (4) Included 10/100-Mbps Copper Ports, 24-VDC Power Supply
Magnum 6KL Configurable Managed Edge Switch Chassis with B and C Slots, (4) Included 10/100-Mbps Copper Ports, 48-VDC Power Supply
Magnum 6KL Configurable Managed Edge Switch Chassis with B and C Slots, (4) Included PoE-Enabled 10/100-Mbps Copper Ports,
48-VDC Power Supply
Adds (4) 10/100-Mbps Copper Ports in 6KL Slot C
Module, Adds (4) PoE 10/100-Mbps Copper Ports in 6KLP-48V Slot C
Module, Adds (4) PoE+ 10/100-Mbps Copper Ports in Slot C (requires either 48V base unit)
Module, Adds (4) 100-Mbps Multimode LC Fiber Ports (2 km) in 6KLP-48V Slot C
Module, Adds (2) 10/100-Mbps Copper Ports and (2) 100-Mbps Single-Mode LC Fiber Ports (20 km) in 6KL Slot C
Module, Adds (2) 10/100-Mbps Copper Ports and (2) 100-Mbps Multimode LC Fiber Ports (2 km) in 6KL Slot C
Module, Adds (4) 100-Mbps Multimode ST® Fiber Ports (2 km) in 6KL Slot C
Module, Adds (2) 10/100-Mbps Copper Ports and (2) 100-Mbps Multimode ST® Fiber Ports (2 km) in 6KL Slot C
Module, Adds (2) 10/100-Mbps Copper Ports and (2) 100-Mbps Single-Mode SC Fiber Ports (20 km) in 6KL Slot C
Module, Adds (2) 1-Gbps SFP Pluggable Open Transceiver Ports in 6KL Slot B
Module, Adds (2) Auto-Negotiating 10/100/1000-Mbps Copper Ports in 6KL Slot B
Gigabit Fiber Optic “SFP” Transceiver, SX, 850-nm, 550 m Nominal Distance, 2 km per Power Budget
Gigabit Fiber Optic “SFP” Transceiver, Extended SX, 1310-nm, 2 km Nominal Distance, 3 km per Power Budget
Gigabit Fiber Optic “SFP” Transceiver, LX, 1310-nm, 10 km Nominal Distance, 22 km per Power Budget
DIN Rail Holder, Provides Secure Vertical Mount of 6KL
Key-Enabled Licensed Software for Magnum Switches, Adds Additional Security Features
Heavy-Duty 8-mil Conformal Coating for Magnum Switch, Modules, Power Supply, and Interior PCBs
6KL4-RJ45
P6KL4-RJ45
PP6KL4-RJ45
6KL4-4MLC
6KL4-2SLC2RJ
6KL4-2MLC2RJ
6KL4-4MST
6KL4-2MST2RJ
6KL4-2SSC2RJ
6KL-2GSFP
6KL-2GCU
SFP-SX
SFP-ESX
SFP-LX10
DIN-RAIL-6KL
MNS-6K-SECURE-LIC1
CONFORM08-CRM
118
Switches
DATA COMMUNICATIONS
GarrettCom® Magnum™ 6KQ Managed Field Switches
Heavy-duty switches with full-featured MNS-6K software.
t The base unit has four 10/100 copper ports and can be configured with a variety of 10/100/1000-Mbps fiber and
copper port connectors
t Configure up to 16 total copper and fiber ports maximum — and get up to Gigabit Ethernet speeds with optional SFPs
t Advanced thermal design with heavy-duty aluminum case for heat dissipation (no fans);
IP52 for environmental protection
t Conformal coating — choose either standard light-duty coating (5 mil) for humid conditions or
t Panelmount brackets included
Mfr.’s Model No.
Description
6KQ-24V
6KQ-48VDC
6KQP-48V
GarrettCom® Magnum™ ES42 Edge Switches
Operate outdoors in temperatures ranging from -40° C to 85° C.
t Provide six switch ports — zero, one, or two may be 100-Mbps fiber,
while remaining ports are 10/100-Mbps copper
t Copper ports feature auto-cross and auto-negotiation support
t Conformal coating — choose either standard light-duty coating
(5 mil) for humid conditions or optional heavy-duty coating
(8 mil) for corrosive environments
Mfr.’s Model No.
Description
ES42P-PD
Magnum ES42 Edge Switch Chassis, Includes (6) 10/100-Mbps Copper Ports, Internal 12-VDC Power Supply,
Metal Panel-Mounting Brackets, and External AC Power Jack
Magnum ES42 Edge Switch Chassis, Includes (6) 10/100-Mbps Copper Ports, Terminal Block for 24-VDC Power Input,
and Metal Panel-Mounting Brackets
Magnum ES42 Edge Switch Chassis, Includes (6) 10/100-Mbps Copper Ports, Terminal Block for 24-VDC Power Input,
and DIN Rail Bracket
Magnum ES42 Edge Switch Chassis, Includes (4) PoE-Enabled 10/100-Mbps Copper Ports and (2) 10/100-Mbps Copper Ports,
Terminal Block for48-VDC Power Input, and Metal Panel-Mounting Brackets
Magnum ES42 Edge Switch Chassis, Includes (1) 100-Mbps ST® Fiber Port and (5) 10/100-Mbps Copper Ports, Internal 12-VDC Power Supply,
Magnum ES42 Edge Switch Chassis, Includes (1) 100-Mbps ST Fiber Port and (5) 10/100-Mbps Copper Ports,
Terminal Block for 24-VDC Power Input, and DIN Rail Bracket
Magnum ES42 Edge Switch Chassis, Includes (1) 100-Mbps SC Fiber Port and (5) 10/100-Mbps Copper Ports, Internal 12-VDC Power Supply,
Magnum ES42 Edge Switch Chassis, Includes (1) 100-Mbps SC Fiber Port and (5) 10/100-Mbps Copper Ports,
Magnum ES42 Edge Switch Chassis, Includes (2) 100-Mbps Single-Mode ST 20KM Fiber Ports and (4) 10/100-Mbps Copper Ports,
Internal 12-VDC Power Supply, Metal Panel-Mounting Brackets, and External AC Power Jack
Magnum ES42 Edge Switch Chassis, Includes (2) 100-Mbps Single-Mode ST 20KM Fiber Ports and (4) 10/100-Mbps Copper Ports,
ES42P-24VDC
ES42PR-24VDC
PES42P-48VDC
ES42P-1ST-PD
ES42PR-1ST-24VDC
ES42P-1SC-PD
ES42PR-1SC-24VDC
ES42P-2SST-PD
ES42PR-2SST-24VDC
CONFORM08-CRM
119
DATA COMMUNICATIONS
Magnum 6KQ Configurable Managed Field Switch Chassis with B, C, and D Slots, (4) Included 10/100-Mbps Copper Ports, 24-VDC Power Supply
Magnum 6KQ Configurable Managed Field Switch Chassis with B, C, and D Slots, (4) Included 10/100-Mbps Copper Ports, 48-VDC Power Supply
Magnum 6KQ Configurable Managed Field Switch Chassis with B, C, and D Slots, (4) Included PoE-Enabled 10/100-Mbps Copper Ports,
48-VDC Power Supply
6KQF-2MST
Module, Adds (2) 100-Mbps Multimode Fiber ST® Ports (2 km) in 6KQ Slot C
6KQF-1MST
Module, Adds (1) 100-Mbps Multimode Fiber ST Port (2 km) in 6KQ Slot C
6KQF-2MSC
Module, Adds (2) 100-Mbps Multimode SC Fiber Ports (2 km) in 6KQ Slot C
6KQF-1MSC
Module, Adds (1) 100-Mbps Multimode Fiber SC Port (2 km) in 6KQ Slot C
6KQF-2SSC
Module, Adds (2) 100-Mbps Single-Mode Fiber SC Ports (20 km) in 6KQ Slot C
6KQF-1SSC
Module, Adds (1) 100-Mbps Single-Mode Fiber SC Port (20 km) in 6KQ Slot C
6KQ-2GSFP
Module, Adds (2) 1-Gbps SFP Pluggable Open Transceiver Ports in 6KQ Slot D
6KQ-2GCU
Module, Adds (2) Auto-Negotiating 10/100/1000-Mbps Copper Ports in 6KQ Slot D
SFP-SX
Gigabit Fiber Optic SFP Transceiver, SX, 850-nm, 550 m Nominal Distance, 2 km per Power Budget
SFP-ESX
Gigabit Fiber Optic SFP Transceiver, Extended SX, 1310-nm, 2 km Nominal Distance, 3 km per Power Budget
SFP-LX10
Gigabit Fiber Optic SFP Transceiver, LX, 1310-nm, 10 km Nominal Distance, 22 km per Power Budget
DIN-RAIL-6KQ
DIN Rail Holder, Provides Secure Vertical Mount of 6KQ and 6KQE
MNS-6K-SECURE-LIC1 Key-Enabled Licensed Software for Magnum Switches, Adds Additional Security Features
CONFORM08-CRM
DATA COMMUNICATIONS
Switches
GarrettCom® Magnum™ CS14 Converter Switches
Combine media converter and switching capabilities.
• Make edge-of-the-network connectivity for industrial devices (PLCs, IEDs, sensors,
plant computers) easier, more reliable, and less expensive
• Provide two RJ-45 ports for greater application flexibility
• RJ-45 ports feature auto-cross and auto-negotiation support
• Perform copper-to-fiber conversion and have
10/100 flexibility on copper ports
• Conformal coating — choose either standard
light-duty coating (5 mil) for humid conditions or
Mfr.’s Model No.
Description
CS14P-ST-PD
Includes (2) 10/100-Mbps Copper Ports, (1) 100-Mbps 2Km Multimode Fiber ST® Port, Internal 12-VDC Terminal Block, External AC Power Supply,
Includes (2) 10/100-Mbps Copper Ports, (1) 100-Mbps 2Km Multimode Fiber ST Port, Internal 24-VDC Power Supply, and
Metal Panel-Mounting Brackets
Includes (2) 10/100-Mbps Copper Ports, (1) 100-Mbps 2Km Multimode Fiber SC Port, Internal 12-VDC Terminal Block, External AC Power Supply,
Includes (2) 10/100-Mbps Copper Ports, (1) 100-Mbps 2Km Multimode Fiber SC Port, Internal 24-VDC Power Supply, and
Metal Panel-Mounting Brackets
Includes (2) 10/100-Mbps Copper Ports, (1) 100-Mbps 20Km Single-Mode Fiber ST Port, Internal 12-VDC Terminal Block, External AC Power Supply,
Includes (2) 10/100-Mbps Copper Ports, (1) 100-Mbps 20Km Single-Mode Fiber ST Port, Internal 24-VDC Power Supply, and Metal Panel-Mounting
Brackets
CS14PR-ST-24VDC
CS14P-SC-PD
CS14P-SC-24VDC
CS14P-SST-PD
CS14P-SST-24VDC
DATA COMMUNICATIONS
CONFORM08-CR
WESCO is your one source for data communications
and security products and solutions
The Catalog
■
Copper Solutions
■
Fiber Optic Solutions
■
■
Tools & Installation Supplies
■
Test Equipment
■
Outside Plant Products
■
Low-Voltage & Specialty Wire & Cable
■
■
Networking Solutions
■
■
Power Distribution, Protection & Cooling
order your
free catalogs
& CDs online
gocsc.com/Catalogs1213
120
Index
In This Section
Product Index .......................122–123
Supplier Index ......................123–124
WESCO’s Global Guide Supplier Partners
This is a
sampling of the
products that
WESCO offers.
121
121
INDEX
Product
ABC
DEF
Adaptors ................................................................ 55
Data Communications ...........................117–120
Air Horns ................................................................ 13
Link/Repeaters ................................................. 118
Analyzers ............................................................. 106
Switches .................................................. 118–120
Area Lighting.................................................... 25, 31
DC Power Supplies ................................................. 99
Bars ..................................................................... 102
Degreasers........................................................... 114
Beacons ........................................................... 10, 13
Device Boxes & Covers........................................... 37
Bells....................................................................... 11
Discharge Reels ..................................................... 60
Brackets, Wall-Mounting ...................................... 110
Disposable Coveralls .............................................. 17
Cable Accessories .................................................. 94
Distribution Blocks ............................................... 100
Cable Armor ........................................................... 67
Distribution Equipment ........................................... 95
Cable Connectors ................................................... 51
Drain Plug .............................................................. 55
Cable Glands .................................................... 49–53
Drifts .................................................................... 102
Cable Ladder .......................................................... 44
Driver Kits ............................................................ 106
Cable Markers ...................................................... 4–5
Dog Tags.................................................................. 5
Cable Ties .............................................................. 71
Encapsulated Transformers .................................... 98
Mounting Bases ................................................. 71
Enclosures, Fittings, & Grounding.............45–60
Nylon ................................................................. 71
Enclosures & Junction Boxes ............................. 48
Stainless Steel ................................................... 71
Fittings......................................................... 49–57
Calibrators ................................................... 107–108
Grounding & Discharge ................................ 59–60
Capacitors .............................................................. 95
Lugs .................................................................. 58
Channel.................................................................. 42
Engraved Stainless Steel,
Circuit Breakers & Fuses ..........................83–91
Cable Markers and Dog Tags ............................... 5
Circuit Breakers ........................................... 84–85
Epoxy Putty .......................................................... 115
Fuse Blocks ....................................................... 91
Ethernet Cables ................................................ 65–66
Fuses ........................................................... 86–90
Fiber Optic Cables .................................................. 66
Surge Protection Devices ................................... 87
Fish Poles, Sticks, and Tapes ............................... 104
Clamps............................................................. 58, 60
Fittings ............................................................. 49–57
Cleaners............................................................... 114
Fixtures — LED................................................ 25–26
Clip Covers ............................................................. 34
Flame-Resistant Jeans ..................................... 20–21
Compression Connectors........................................ 58
Flame-Resistant Shirts ..................................... 21–22
Conductors....................................................... 68–70
Flashlights........................................................ 14–15
Conduit Bodies ..................................... 34–35, 40–41
Floodlights
Conduit Connectors .......................................... 40, 57
Flameproof......................................................... 30
Flexible Metal..................................................... 57
LED .............................................................. 24–25
Stainless Steel ................................................... 57
Zone 2, 21 & 22 ................................................. 30
Conduit Fittings ...................................................... 41
Fluorescent Luminaires .................................... 27–29
Conduit, Boxes, & Raceway ......................33–44
Frequency Drives ............................................. 85, 96
Cable Ladders .................................................... 44
Fuse Blocks............................................................ 91
Channel Nuts ..................................................... 42
Fuses ............................................................... 86–90
Channels............................................................ 42
Current Limiting ................................................. 86
Compound ......................................................... 38
Fast Acting ............................................. 86–87, 90
Conduit Bodies & Boxes ......................... 34–36, 38
High Speed ........................................................ 86
Device Boxes ..................................................... 37
Medium Voltage ................................................. 86
Junction Boxes .................................................. 37
Time Delay................................................... 86–90
Sealing Fittings ................................ 36, 38, 40–41
Strut Systems .................................................... 43
GHI
Connectors................................................. 77–78, 80
Gaskets .................................................................. 37
Control Panels ........................................................ 48
Gloves .............................................................. 16–17
Control Stations................................................ 82, 96
Grounding Connectors ............................................ 59
Control & Apparatus ............................................... 96
Grounding Studs .................................................... 60
Conveyer Belt Idlers ............................................. 113
Grounding System .................................................. 59
Cord Connectors .................................................... 49
Hand Protection................................................ 16–17
Cord Grips .............................................................. 56
Handheld Lights ..................................................... 32
Core Indents............................................................. 5
Harnessing & Tubing ............................................. 72
Coupling Systems ............................................ 76, 80
Headlamps ............................................................. 15
Couplings ............................................................... 50
Heaters ........................................................ 109–110
Coveralls .......................................................... 17–19
Heatshrink................................................................ 4
122
HID Luminaires....................................................... 27
Hole Saws ............................................................ 105
Horns ............................................................... 11–13
In-Line Cords ......................................................... 81
Incandescent Lights ............................................... 32
Industrial Cables .............................................. 65–67
Industrial Maintenance Supplies ..........111–115
Cleaners .......................................................... 114
Conveyer Belt Idlers ......................................... 113
Degreasers ...................................................... 114
Insecticides ...................................................... 115
Lubricants ........................................................ 115
Penetrating Solvents ........................................ 114
Sealants ........................................................... 115
Sorbents .......................................................... 112
Insecticides .......................................................... 115
Instrumentation Cables..................................... 67–68
Insulation Repair .................................................... 72
IR Windows .......................................................... 107
JKL
Jackets .................................................................. 22
Jeans ............................................................... 20–21
Junction Boxes................................................. 37, 48
Kemlux II ................................................................ 13
Knockout Punches........................................ 105–106
Label Makers ........................................................... 6
Label Printers ....................................................... 6–8
Labeling ............................................................... 4–8
Lamps & Lighting ......................................23–32
Fixtures — LED ........................................... 25–26
Floodlights ......................................................... 30
Fluorescent .................................................. 27–29
H.I.D. ................................................................. 27
Handheld Lights ................................................. 32
Hazardous Locations .......................................... 31
LED .................................................................... 24
Stringlights ........................................................ 31
Temporary Lighting ............................................ 32
Wellglass ........................................................... 30
LED Luminaires ...................................................... 24
Link/Repeaters ..................................................... 118
Liquid Pour Barrier Gland ................................. 52, 54
Lockout Kits ............................................................. 8
Lubricants ............................................................ 115
Lugs....................................................................... 58
MNO
Marker Sleeves ........................................................ 4
MC Cable ............................................................... 70
Midstream and Downstream Cable ......................... 63
Modular Substations .............................................. 95
Multimeter ........................................................... 108
Outlet Boxes................................... 35–36, 38, 40, 81
Outlets ................................................................... 79
Overalls .................................................................. 19
Product, Supplier
PQR
Panelboards ........................................................... 97
Particle Counters .................................................. 108
Penetrating Solvents ............................................ 114
Performance Cables ......................................... 64–65
Pipe Clamps ........................................................... 58
Pin & Sleeve Devices ........................................ 74–75
Pins...................................................................... 102
Plugs.................................................... 50, 55, 75–79
Plugs & Connectors .......................................... 77–80
Plugs & Receptacles................................... 75–76, 80
Power Centers........................................................ 99
Protective Clothing ........................................... 17–22
Punches ............................................................... 103
Receptacles ............................................... 75–76, 80
Reducers................................................................ 55
Reducing Bushings................................................. 50
Bars ................................................................. 102
Calibrators ............................................... 107–108
Drifts................................................................ 102
Fish Poles, Sticks, and Tapes ........................... 104
Heaters .................................................... 109–110
Hole Saws ........................................................ 105
Knockout Punches ................................... 105–106
Multimeter ....................................................... 108
Particle Counters.............................................. 108
Punches ........................................................... 103
Sledge Hammers ............................................. 103
Testers..................................................... 106–107
Thermal Imagers .............................................. 107
Thermostats..................................................... 110
Wedges............................................................ 103
Testers ......................................................... 106–107
Safety ..........................................................3–22
Thermostats ......................................................... 110
Flashlights ................................................... 14–15
Transformers & Electrical Distribution ...93–100
Hand Protection ........................................... 16–17
Control & Apparatus ........................................... 96
Headlamps......................................................... 15
DC Power Supplies............................................. 99
Labeling ........................................................... 4–8
Distribution Blocks ........................................... 100
Lockout ................................................................ 8
Encapsulated Transformers ................................ 98
Protective Clothing ....................................... 17–22
Panelboards ....................................................... 97
Signage ............................................................... 9
Power Centers ................................................... 99
Signaling...................................................... 10–13
Transformers ............................................... 94, 98
Sealants ............................................................... 115
Transparent Sleeves................................................. 5
Sealing Fittings .................................... 36, 38, 40–41
Tray Cables ............................................................ 68
Shirts ............................................................... 21–22
Tubing & Harnessing .............................................. 72
Sign Printers ............................................................ 8
Unions.................................................................... 50
Signage.................................................................... 9
Upstream Cable................................................ 62–63
Signaling .......................................................... 10–13
VWXYZ
Sorbents .............................................................. 112
Speaker Amplifiers ................................................. 13
Splices ................................................................... 72
Split-Bolt ................................................................ 59
Status Indicators .................................................... 10
Strain-Relief Connectors......................................... 50
Stringlights............................................................. 31
Strobe Lights.......................................................... 12
Strut Fastener ........................................................ 42
Strut System .......................................................... 43
Struts, Straps, and Clamps ..................................... 41
Surge Arresters ...................................................... 95
Surge Protection Devices ....................................... 87
Switches ................................................ 82, 118–120
Converter ......................................................... 120
Edge ........................................................ 118–119
Field................................................................. 119
Switchgear ............................................................. 95
Temporary Lighting ................................................ 32
Tone Signals .......................................................... 11
Tools, Testers, & Equipment .................101–110
Analyzers ......................................................... 106
Performance Cables ....................................... 64–65
Industrial Ethernet Cables..................................... 65
Pins ................................................................. 102
Thermal Imagers .................................................. 107
Sockets .................................................................. 75
Transformers ....................................................... 98
Power Centers...................................................... 99
DC Power Supplies ............................................... 99
IR Windows ...................................................... 107
STU
Sledge Hammers.................................................. 103
INDEX
Valve Tags ............................................................... 5
VFD Cables............................................................. 67
Vibrating Horns and Bells ................................. 11–13
Vehicle Ground Disconnect Clamp .......................... 60
Wellglass ............................................................... 30
Wedges ................................................................ 103
Flameproof Fluorescent Luminaires ...................... 28
Non-Metallic Fluorescent Luminaires ................... 28
Light-Duty Fluorescent Luminaires ....................... 29
Heavy-Duty Fluorescent Luminaires ..................... 29
Floodlights ........................................................... 30
Flameproof Floodlights ......................................... 30
Wellglass Luminaires ........................................... 30
Flameproof Wellglass Luminaires ......................... 30
Conduit Bodies ............................................... 34–35
Outlet Boxes................................................... 35–36
Sealing Fittings .................................................... 36
Device Boxes ....................................................... 37
Junction Boxes..................................................... 37
Fittings ........................................................... 50–51
Pin & Sleeve Devices ...................................... 74–75
Receptacles ......................................................... 75
Plugs & Sockets ................................................... 75
Switches .............................................................. 82
Control Stations.................................................... 82
Industrial Data Cables .......................................... 66
VFD Cables........................................................... 67
Instrumentation Cables......................................... 67
Label Makers ......................................................... 6
Label Printers ..................................................... 6–8
Sign Printers .......................................................... 8
Ribbons, Tapes, Sign Headers ................................ 8
Lockout Kits ........................................................... 8
Safety Signs ........................................................... 9
Sorbents ............................................................ 112
Wide-Area Lighting................................................. 31
Wire & Cable..............................................61–72
Cable Ties .......................................................... 71
Conductors .................................................. 68–70
Industrial Cables .......................................... 65–67
Protective Clothing ......................................... 18–19
Flame-Resistant Clothing ............................... 20–21
Performance Cables ..................................... 64–65
Tray Cables ........................................................ 68
Tubing & Harnessing .......................................... 72
Wiring Devices ..........................................73–82
Control Stations ................................................. 82
Grounding Supplies ........................................ 59–60
Static Discharge Reels ......................................... 60
In-Line Cords ..................................................... 81
Outlet Boxes....................................................... 81
Pin & Sleeve Devices.................................... 74–75
Plugs & Connectors ...................................... 77–80
Flame-Resistant Clothing ......................... 19–20, 22
Plugs & Receptacles .............................. 75–76, 80
Switches ............................................................ 82
continued
123
INDEX
Supplier
RapidEx ................................................................ 52
Cable Glands ........................................................ 53
Barrier Glands ...................................................... 54
Fittings ................................................................. 55
Strut Systems....................................................... 43
Cable Ladders ...................................................... 44
Fuses ............................................................. 86–87
Surge Protectors .................................................. 87
LED Luminaires .................................................... 24
LED Floodlights .............................................. 24–25
Explosion-Proof LED Luminaires ........................... 24
HID Luminaires..................................................... 27
Explosion-Proof HID Luminaires............................ 27
Fluorescent Luminaires ........................................ 27
Explosion-Proof Fluorescent Luminaires ............... 27
Non-Metallic Fluorescent Luminaires ................... 27
Conduit Bodies ..................................................... 38
Outlet Boxes......................................................... 38
Sealing Fittings .................................................... 38
Sealing Compound ............................................... 38
Enclosures ........................................................... 48
Junction Boxes..................................................... 48
Control Panels ...................................................... 48
Fittings ................................................................. 49
Plugs & Receptacles............................................. 76
Coupling Systems ................................................ 76
Control Stations.................................................... 96
Variable Frequency Drives .................................... 96
Panelboards ......................................................... 97
Circuit Breakers ............................................. 84–85
Adjustable Frequency Drive .................................. 85
Beacons & Warning Lights.................................... 10
Alarms ................................................................. 11
Horns, Bells, & Sirens ........................................... 11
Tray Cables .......................................................... 68
Conductors..................................................... 68–70
Warning Lights ..................................................... 12
Horns & Sirens ............................................... 12–13
Analyzers ........................................................... 106
Testers ....................................................... 106–107
Calibrators ................................................. 107–108
Thermal Imagers ................................................ 107
IR Windows ........................................................ 107
Particle Counters ................................................ 108
Multimeters........................................................ 108
Link/Repeaters ................................................... 118
Switches .................................................... 118–120
Upstream Cable.............................................. 62–63
Midstream & Downstream Cable .......................... 63
Fuses ............................................................. 88–90
Fuse Blocks.......................................................... 91
Power Distribution Blocks................................... 100
Product Systems and Solutions ...................... 46–47
Flashlights...................................................... 14–15
Headlamps ........................................................... 15
Tubing.................................................................. 72
Splice Kits ............................................................ 72
Cable Repair......................................................... 72
Conduit Bodies ..................................................... 40
Strut, Straps, and Clamps..................................... 40
Fittings ........................................................... 40–41
Conduit Boxes ...................................................... 41
Conduit ................................................................ 41
Channels .............................................................. 42
Strut Fastener ...................................................... 42
Conduit Connectors .............................................. 57
Lugs..................................................................... 58
Connectors........................................................... 58
Clamps................................................................. 58
Cable Ties ............................................................ 71
Mounting Bases ................................................... 71
Heaters ...................................................... 109–110
Thermostats ....................................................... 110
Wall-Mounting Brackets ..................................... 110
Connectors........................................................... 77
Conveyer Belt Idlers ........................................... 113
LED Lighting......................................................... 25
Fish Tapes, Poles, & Sticks................................. 104
Hole Saws .......................................................... 105
Knockout Kits ..................................................... 105
Driver Kits .......................................................... 106
Gloves ............................................................ 16–17
Protective Clothing ............................................... 17
Power System Solutions ................................. 94–95
Hazardous Area Lighting ...................................... 13
LED Fixtures ......................................................... 26
Degreasers......................................................... 114
Cleaners............................................................. 114
Penetrating Solvents .......................................... 114
Lubricants .......................................................... 115
Epoxy Putty ........................................................ 115
Sealants ............................................................. 115
Insecticides ........................................................ 115
Cable Markers .................................................... 4–5
Marker Sleeves .................................................. 4–5
Shrink System ........................................................ 4
Valve & Dog Tags ................................................... 5
124
Bars ................................................................... 102
Pins.................................................................... 102
Drifts .................................................................. 102
Wedges .............................................................. 103
Punches ............................................................. 103
Sledge Hammers................................................ 103
Stringlights..................................................... 31–32
Hazardous Area Lighting ................................ 31–32
Portable Floodlights .............................................. 31
Portable Stringlights ............................................. 32
Fluorescent Handheld Lights ................................ 32
Fluorescent Hand Lamps ...................................... 32
Cord Grips ............................................................ 56
Plugs.............................................................. 78–79
Connectors..................................................... 78–80
Outlets ................................................................. 79
Receptacles ......................................................... 80
Outlet Boxes......................................................... 81
Adapter Cords ...................................................... 81
WESCO Delivers
Welcome!
Local Presence.
Global Reach
to the 2013/2014
WESCO Global Guide
for the Mining and Oil
& Gas Industries
I am pleased to introduce WESCO’s first
Global Guide for the Mining and Oil & Gas Industries.
Focusing on solutions for harsh and hazardous environments,
this catalog provides a sample of the range of products and
services we offer from 30 of the largest and most-respected
manufacturers to support your supply chain, from strategic
planning through production and delivery.
Decision makers in the mining and oil & gas industries face complex issues that cross
borders, continents, and political divides. As energy companies contend with operating
challenges brought on by the global economy and new and emerging regulations,
WESCO offers products and solutions that can reduce costs, streamline supply chain
processes, increase total supply capacity, and enhance value chain integrity.
Whether you are a longtime WESCO customer or just getting to know us, you will benefit
from leveraging our entire portfolio of products and services. Our WESCO team looks
forward to being your one source for global electrical, communications, capital projects,
and MRO supply chain solutions.
John J. Engel
Chairman, President, and Chief Executive Officer
www.wesco.com
The One Place Where
You Can Get It All
Audio/Visual
Pro A/V Solutions
Voice, Paging, and Sound Products
Automation and Control
Bar Code Printers, Scanners, and Software
Boxes and Enclosures
Circuit Breakers
Conduit and Raceway
Controls, Relays, and Timers
Data Communications Infrastructure Solutions
Cable — Copper and Fiber Optic
From our beginnings as part of Westinghouse
Electric in 1992, WESCO has completed
countless large, complex projects with great
success. WESCO’s heritage was built on
large construction projects all over the world.
Leverage our expertise and experience to keep
your capital projects and day-to-day MRO
spend well-coordinated and operating at peak
efficiency.
Local and International Support
Angola | Australia | Brazil | Canada | Chile
China | Czech Republic | England | Mexico
Peru | Poland | Saudi Arabia | Scotland
Singapore | UAE | USA | and more!
Learn more at www.wesco.com/
international
Equipment Racks and Cabinets
Drives and Logic Control
Electrical Distribution Equipment
Enclosures
Fans, Heaters, and Ventilation Equipment
Fittings
Fuses and Circuit Breakers
Handheld Products
Illumination/Indicators
Industrial and Maintenance Supplies
Installation Supplies
Lamps, Fixtures, and Ballasts
Low-Voltage Specialty Wire and Cable
Machine Safety Products
Material Handling
Motors
Non-Electrical MRO
Power Distribution and Protection
Power Supplies
Relays
Security
Sensors
Surge and Power Protection
Switches
Termination, Tape, Splicing, and Marking
Tools and Testers
Transformers
Wire and Cable
Wireless Networking Solutions
Wiring Devices
WESCO Delivers
Inventory Management
Solutions for
Mining and Oil & Gas
• Logistics and warehousing for local inventory
and support
• Material take-offs
• Remote inventory management through RPM,
our global materials management system
• Jobsite trailers
• Cable management
Learn more at www.wesco.com
WESCO’s Global Guide
Supplier Partners
Safety
More Products.
More Brands.
Extra-Effort Service.
Visit or Call:
Your Local
WESCO Branch
See the Branch
Locator at:
www.wesco.com
© Copyright 2012
WESCO Distribution, Inc.
All Rights Reserved.
Printed in the USA.
51899/0912
& Grounding
Wire & Cable
1st Edition 2013/14
WESCO International, Inc. (NYSE: WCC), a publicly traded Fortune 500
holding company headquartered in Pittsburgh, Pennsylvania, is a
leading provider of electrical, industrial, and communications
maintenance, repair and operating (“MRO”) and original equipment
manufacturers (“OEM”) product, construction materials, and advanced
supply chain management and logistic services. 2011 annual sales
were approximately $6.1 billion. The Company employs approximately
7,500 people, maintains relationships with over 18,000 suppliers, and
serves over 65,000 active customers worldwide. Customers include
commercial and industrial businesses, contractors, government
agencies, institutions, telecommunications providers and utilities.
WESCO operates eight fully automated distribution centers and
approximately 400 full-service branches in North America and
international markets, providing a local presence for customers and a
global network to serve multi-location businesses and multi-national
corporations.
Conduit, Boxes,
& Raceway
WESCO Global Guide • Mining and Oil & Gas Industries
That’s the WESCO difference.
Whether you call or visit one of our
approximately 400 Branches
(supported by eight North American
Distribution Centers), you’ll find the
electrical and general MRO products
you need — fast and ready to ship.
Lamps & Lighting
Wiring Devices
Circuit Breakers
& Fuses
Transformers &
Tools, Testers,
& Equipment
Industrial Maintenance
Supplies
Data Communications

Global Guide PDF

Transcription

Similar documents

silly cable tech terms

www.vecsupply.com

AccuBoom™ Case IH SPX 3310 CAN Installation

Scooter Soundboards - WilTec Wildanger Technik GmbH

What is DIGITAL LINK?

B1557601-EXI-0005 to 0006 – Public Utilities

Ebeco winter products

ses center arc cable antenna program