02003 Mercury Marine Oils DL Brochure FA3.indd

Transcription

02003 Mercury Marine Oils DL Brochure FA3.indd
Mercury Marine Precision
Oils and Lubricants
Introducing Mercury Precision Oils and
Lubricants - Total protection for your engine
from the inside.
Boating is not often thought of as a harsh
environment. Just stop and think about it.
Marine engines can and are often used for
extended periods at wide-open throttle (up to
6400rpm on some models) in harsh saltwater
and full UV sunlight environments. Then sit in
storage over the off-season, in some cases
without any use.
With that in mind, all Mercury Oils and
Lubricants are specifically engineered for
the unique needs of marine engines and
rigorously tested to meet our high standards.
So you can get the most out of your engine,
while having total peace of mind that your
engine is being protected. Exactly what you
should expect from the only marine engine
manufacturer 100% focused on the marine
industry, for over 70 continuous years.
Mercury Premium 2-Cycle Outboard Oil
Mercury Certified TC-W3 is designed to meet
the unique requirements of 2-cycle marine
engines, formulated and designed to help
prevent corrosion on internal components,
maintain peak engine performance and
extend engine life.
The special Mercury formula meets the
requirements of all leading manufacturers
of outboards, personal watercrafts, even
motorcycles and other 2-Cycle air or water
applications allowing for it to be used in a
wide variety of non-marine uses when mixed
at manufacturers recommended ratios.
Available in:
1 Litre 92-858021K01
4 Litre 92-858022K01
Mercury Premium Plus 2-cycle Outboard Oil
Mercury Premium Plus Outboard Oil goes
beyond the basic requirements of any 2-cycle
marine engine to provide superior protection for
mid to high horsepower engines.
Continued use provides outstanding wear
and corrosion protection, minimises build-up
of performance-robbing carbon deposits and
maintains peak engine performance
and reliability; helping to extend the life
of your engine.
The unique Mercury formula exceeds the TC-W3
standards and those of all leading manufacturers
of outboards, personal watercrafts, even
motorcycles and other 2-cycle air or water
applications; allowing for it to be used in a wide
variety of non-marine engines when mixed at
manufacturers recommended ratios.
Available in:
1 Litre 92-858026K01
4 Litre 92-858027K01
10 Litre 92-858028K01
Mercury OptiMax/DFI Outboard Engine Oil
This new synthetic blend oil was developed
specifically for the greater demands of DFI
outboard engines and provides the maximum
protection for OptiMax and DFI engines even
under the most extreme operating conditions.
This exclusive new formula provides
increased lubrication while minimising carbon
deposits, helps reduce smoke and provides
the highest protection for the engine.
It is not intended for use in engines
specifying a TC-W3 oil.
Available in:
4 Litre 92-858037K01
10 Litre 92-858038K01
Mercury 4-Stroke Engine Oil
Mercury 4-Stroke oil has been specifically
formulated and developed to meet the needs
of all 4-Stroke outboard engines.
A premium grade base stock and special
additives make this a superior grade of
4-Stroke outboard oil that can stand up to
the rigors of the marine environment. It keeps
your engine running at peak performance
whilst providing superior lubrication,
outstanding wear and corrosion protection,
Available in:
1 Litre 92-858045K01
4 Litre 92-858046K01
Mercury Synthetic 4-Stroke Engine Oil
This Synthetic range of 25W-40 oil was
formulated specifically for 4-Stroke outboards
by Mercury, the Marine Technology and
Performance leader. Qualified through
extensive testing by Mercury Marine
Engineering to provide superior long-term
marine four-stroke engine reliability.
This synthetic blend of premium grade
base stocks contains specifically designed
additives for optimum marine performance
that regular automotive oils do not require.
It provides superior moisture and rust free
protection, improved performance and
protects against wear, for trouble
free operation.
Available in:
1 Litre 92-858052K01
4 Litre 92-858053K01
Mercury Verado Outboard Oil
Mercury Verado outboard oil has been
specifically formulated for the increased
demands of Verado SuperCharged
outboards.
A technology specific 25W-50 marine oil,
it is formulated for the world’s first and
only supercharged and intercooled
outboard engine.
The unmatched torque and acceleration of
this engine requires maximum protection,
found only in this well-balanced combination
of today’s highest quality synthetic base
stock, plus an advanced additive system
that meets the stringent marine operational
requirements of all 4 and 6 cylinder
Verado models.
Available in:
1 Litre 92-8M0053665
4 Litre 92-858084K01
Mercury Sterndrive & Inboard 4-Cycle Engine Oil
Specifically formulated and developed to
meet the needs of high-output sterndrive
and inboard engines.
This premium multi-viscosity oil is
formulated to eliminate thermal breakdown
(no viscosity improvers necessary) under
extreme temperatures and loads. It has been
field-tested and proven in petrol and diesel
applications. It provides superior lubrication
and protection of internal components from
corrosion, wear, scuffing and scoring – even
in higher temperature engines.
Not suitable for catalyzed engines.
Available in:
1 Litre 92-858048K01
4 Litre 92-858049K01
Mercury MerCruiser Full Synthetic Engine Oil
Marine engines are subjected to much higher loads
and running stresses than automotive engines. Marine
engines continually work at higher rpm levels compared
to passenger cars so your choice of marine grade oil
has to be able to take the heat as well as deal with the
low temperatures of the water that cools your engine.
This full Synthetic 20W-40 engine oil was formulated
to provide optimum operation and longer life for all
Mercury MerCruiser petrol engines and for the critical
engine catalyst systems offered today.
The benefit of using this oil in MerCruiser Catalyst
models is an extended catalytic converter life due to a
low phosphorus formulation.
This distinct synthetic blend of premium grade base
stocks contains specifically designed additives for
optimum marine performance that regular automotive
oils do not require. It provides superior wear protection
and lubrication protection, extreme salt and freshwater
rust protection and its more stable, high viscosity oil
that prevents dirt and soot from settling on
metal surfaces.
Must be used in catalyzed engines
Available in:
1 Litre 92-858087K01
4 Litre 92-858088K01
Mercury Heavy Duty Diesel Engine Oil
Heavy Duty Diesel Engine Oil has been
formulated to meet heavy-duty diesel
requirements while combating sludge and
varnish formation. This oil contains a higher
additive level than standard fleet oils and
provides greater protection under the most
severe operating conditions, extended
service, or poor fuel quality. This shear stable
multigrade formula provides excellent water
tolerance in addition to controlling deposits.
Available in:
4 Litre 92-858042K01
Mercury Premium Gear Lube
Specifically designed and tested for marine
applications, Mercury Premium Gear Lube
has been engineered to provide excellent
lubrication and wear resistance to lower unit
gears in all outboards*. Specialised molecules
improve adhesion, protecting gears from
metal-to-metal contact.
Mercury Premium Gear Lube is recommended
in lower units for outboards below 75hp.
Do not mix with High Performance Gear Lube.
*Not intended for use in OMC electric
shift gear cases.
Available in:
1 Litre 92-858058K01
10 Litre 92-858059K01
Mercury High Performance Gear Lube
Want superior protection for your engine?
Mercury’s High Performance Gear Lube
provides the best protection possible for
you sterndrive or outboard*. The exclusive
formulation provides extended gear life in the
most extreme conditions including high speed
and high horsepower applications.
Extensive testing has shown proven protection
against corrosion and excessive wear. Extreme
pressure synthetic additives protect gears from
metal-to-metal contact. The specialised marine
formulation also helps protect against failure
due to water in the gear housing.
Mercury High Performance Gear Lube is
recommended in lower units for outboards
above 75hp and all sterndrives.
Do not mix with Premium Gear Lube.
*Not intended for use in OMC electric shift
gear cases.
Available in:
1 Litre 92-858064K01
10 Litre 92-858065K01
Mercury Precision Lubricants
Specifically formulated to endure some of
the toughest and harshest environments on
earth, Mercury Lubricants ensure the highest
level of protection available for your
marine motor.
Unlike automotive lubricants, all Mercury
branded lubricants are specifically formulated
for the unique needs of Mercury engines
and are rigorously tested to meet our
own high standards. It also means they
meet the requirements of all other leading
manufacturers of marine engines, because
Mercury is the industry standard.
Protecting your investment and warranty is
easy; insist on Genuine Mercury Oils
and Lubricants.
FUEL TREATMENT
Protect your engine against
modern fuel – both petrol and diesel
Modern boat owners need to be extra vigilant to protect
their engines and entire fuel systems from the damage
and contamination that often occurs during storage.
This can be a major issue for thousands of recreational
boat owners who regularly take breaks from the water.
Poorly maintained fuel systems can adversely affect
engine reliability which is why Mercury Marine
developed its “Fuel System Treatment & Stabilizer” –
to protect boat and engine fuel systems for extended
periods of time.
Quickare is a fuel treatment that can be used at every
fill up to maximize engine performance with all grades
of petrol. It keeps fuel fresh between fill ups, up to 3
months, and helps control corrosion, gum and varnish
build-up and phase separation associated with ethanol
blend fuel.
Quickleen engine & fuel cleaner should be used
throughout the boating season to quickly and
thoroughly remove carbon deposits from carburettors
and injectors, intake valves, spark plugs, piston crowns
and cylinder heads.
Quickstor is twice as strong and should be added to the
fuel before long-term boat storage to prevent regular
and ethanol blended fuel from breaking down and
oxidizing. Stabilize fuel for up to a year.
Unlike the competition, Mercury’s stabilizer has been
specifically designed for use in all 2 or 4-Stroke petrol
and diesel engines.
By preventing the formation of impurities in dormant
fuel systems, Mercury’s “Fuel System Treatment &
Stabilizer” protects engines, fuel tanks and fuel lines
against chemical damage, deposits and clogs which
could cost thousands of dollars.
For the most effective results, Mercury’s “Fuel System
Treatment & Stabilizer” should be added to your fuel
tank before filling with fuel.
All data is correct at the time of printing,
however Mercury Marine reserves the
right to change prices and specifications
without notice. All products available
at time of publication.
93 - 8M8000189
Mercury Marine
A.B.N 25 003 100 007
Phone 1800 818 000 (Australia)
Phone: 0800 688 262 (New Zealand)
www.mercurymarine.com.au
www.mercurymarine.co.nz