farmers want pruning shears

FARMERS WANT PRUNING SHEARS
THAT WILL MAKE THEIR WORK EASIER
With the maximum quality, you´ll get better results.
www.podafacil.com
C/ Urola, nº 10. Apdo. nº 1, 20230 Legazpi. Guipúzcoa. Spain
Tel.: +34 943 73 90 00 / Fax: +34 943 73 15 01 / e-mail: [email protected]
www.bellota.com
We know what farmers need because we design
our tools together with them.
INNOVATION PRUNING SHEARS CATALOGUE
CONTENTS
01 Loppers
8
02 Pruners
16
03 Spare parts
26
INNOVATION RANGE PROFESSIONAL
PRUNING SHEARS.
FRUIT OF OUR EXPERIENCE AND
TEAMWORK WITH FARMERS.
We know what farmers need
because we design our tools
together with them.
Working with farmers for more
than 100 years.
Nobody knows better than
professional farmers how the tools
for their work should be. This is
why at Bellota, we rely on a team of
farmers who take part in developing
the tools, provide feedback during
testing, and approve the results.
We have been working with farmers for
more than 100 years. Providing solutions.
Innovating. Helping them to do their work
more easily and conveniently. Our new
range of professional pruning shears is a
true reflection of our experience and our
commitment to farmers.
Bellota is the trusted brand of
farmers. And we don´t say so;
they do.
WE UNDERSTAND THE NEEDS OF
FARMERS AND FARMERS RECOGNISE
BELLOTA QUALITY.
The following conclusions were extracted
from the market study of farmers
performed by QUOR*:
• Bellota is the trusted brand of
farmers.
• Bellota is recognised as a brand
of agricultural tools by 98.3% of
those interviewed.
Constantly
innovating.
Our objective of making pruning work easier
and more convenient leads us to constantly
search for more innovative solutions. This
year, we present two innovations that
address the specific needs expressed by
farmers.
New range of snipers, lighter and more
ergonomic.
New anvil lopper for fruits, with a more
precise and easier cut.
• Bellota is more concerned with
the safety of farmers.
• Bellota is a specialist of
agricultural tools.
* Market study performed by QUOR in 2006 (700 indepth interviews).
THESE ARE THE PROFESSIONAL PRUNING
SHEARS THAT FARMERS WANT.
With the EASY-ADJUST
System. Simple. Precise.
Stable.
PRECISE ADJUSTMENT
The extra-fine thread nut-and-pin
system makes it possible to adjust the
blades very precisely so that each farmer
may adjust the shears to their own
preference.
The design of Bellota´s
EASY-ADJUST SYSTEM is
internationally patented.
SIMPLE ADJUSTMENT
The adjustment is simple and easy
because the system is made up of
only 3 parts. Only an Allen key is
needed for the adjustment.
STABLE ADJUSTMENT
The clamp nut provides an immediate
stable adjustment, without having
to stop pruning so as to adjust the
shear.
An exclusive Bellota
advantage.
SHEARING IS MORE CONVENIENT. SHEARING IS EASIER.
A careful design perfectly
adapted to the user´s hand.
Tri-material handles that are
unique in the market.
The Bellota shock absorption
system gives an efficient result.
ONE-HAND PRUNING SHEARS
A careful design perfectly adapted to
the user´s hand.
LOPPERS
Lower transmission of vibrations and less
fatigue when cutting.
The aluminium body provides resistance
and lightness.
Larger shock absorbers, with a greater
surface area for increased effectiveness.
The bi-material injection covering
(polypropylene + elastomer) offers
greater convenience.
The system is located at mid-length in order
to improve the shear´s accessibility.
The elastomer grips provide a better hold
and a pleasant feel.
The balanced weight of the shear reduces
fatigue during continued work periods.
SERRATED COUNTERBLADE
The universal models
of the range are also
available in a serrated
counter-blade version,
which gives the shears
greater branch stability
while requiring less
cutting effort.
01
LOPPERS
Thanks to its shock absorption system and its balanced
weight, farmers experience less fatigue when working with
Bellota loppers. They also have elastomer grips, giving them
a better hold and a more pleasant feel. And of course they
are also equipped with Bellota´s EASY-ADJUST system,
providing precise, simple and stable tool adjustments. All of
the advantages that farmers want in a shear.
loppers
BELLOTA PROFESSIONAL PRUNING SHEARS
max.
35
mm.
Universal pruning shear
REF. 3578
CUTTING
CAPACITY
USE
Universal shearing: vineyard, fruit and
olive trees.
WROUGHT
ADVANTAGES
1.Easy and clean cut.
2.Perfect penetration and sliding of the
cutting blade on the branch.
EASY-ADJUST
3.Patented and exclusive EASY-ADJUST joint
system: precise, simple and stable.
4. Maximum ergonomics, less cutting effort
and minimal fatigue: exclusive shock
absorber design.
FEATURES
UNIVERSAL
1.Wrought cutting blades made of chrome
vanadium steel, highly resistant to wear.
2.Special finish for the cutting edges.
3.Elliptical aluminium handles with
elastomer grips.
4.Includes free Allen key for the user.
SPARE PARTS
1. All available.
REF
10
grs
mm
3578-40
580112
6
772
400
3578-45
549812
6
780
450
3578-50
549836
6
880
500
3578-60
549850
6
900
600
3578-75
588552
6
932
750
3578-90
567953
6
980
900
loppers
BELLOTA PROFESSIONAL PRUNING SHEARS
Universal serrated
counter-blade pruning
shear
REF. 3578D
max.
35
mm.
CUTTING
CAPACITY
USE
Universal shearing: vineyard, fruit and olive
trees.
ADVANTAGES
WROUGHT
1.Easy and clean cut.
2.Perfect penetration and sliding of the cutting
blade on the branch.
3.Patented and exclusive EASY-ADJUST joint
system: precise, simple and stable.
EASY-ADJUST
4.Maximum ergonomics, less cutting effort and
minimal fatigue: exclusive shock absorber
design.
5. Minimal cutting effort: serrated counter-blade,
maximises stability for easier cutting.
FEATURES
1.Wrought cutting blades made of chrome
vanadium steel, highly resistant to wear.
SERRATED
2.Special finish for the cutting edges.
3.Elliptical aluminium handles with elastomer
grips.
4.Includes free Allen key for the user.
UNIVERSAL
SPARE PARTS
1. All available.
REF
grs
mm
3578D-45
549874
6
780
450
3578D-50
549898
6
820
500
3578D-60
549911
6
860
600
3578D-75
588576
6
900
750
3578D-90
567977
6
980
900
11
loppers
BELLOTA PROFESSIONAL PRUNING SHEARS
max.
50
mm.
Fruit pruning shear
REF. 3580
CUTTING
CAPACITY
USE
Especially designed for fruit pruning.
Special for large diameters cuts.
ADVANTAGES
WROUGHT
1. Patented and exclusive EASY-ADJUST joint
system: precise, simple and stable.
2.Clean and efficient cut.
3.Ergonomic handles, perfectly adapted to
the user´s hand.
EASY-ADJUST
4. Maximum ergonomics, less cutting effort
and minimal fatigue: exclusive shock
absorber design.
FEATURES
1.Wrought cutting blades made of chrome
vanadium steel, highly resistant to wear.
FRUIT
2.Special finish for the cutting edges.
3.Elliptical aluminium handles with
elastomer grips.
4.Includes free Allen key for the user.
SPARE PARTS
1. All available.
REF
12
grs
mm
3580-50
501247
6
850
500
3580-60
501292
6
890
600
3580-75
588590
6
950
750
3580-90
566543
6
1.010
900
loppers
BELLOTA PROFESSIONAL PRUNING SHEARS
Universal light pruning shear
REF. 3588D
max.
35
mm.
CUTTING
CAPACITY
USE
Universal shearing: vineyard, fruit and
olive trees.
ADVANTAGES
WROUGHT
1. Light shear: reduces fatigue at the end of the work
shift.
2. Easy and clean cut: perfect penetration and sliding
of the cutting blade on the branch.
3. Patented adjustment system: simple, precise and
stable.
EASY-ADJUST
4. Maximum ergonomics: exclusive shock absorber
design.
5. Minimal cutting effort: serrated counter-blade,
maximises stability for easier cutting.
FEATURES
SERRATED
1. Light aluminium handles.
2. Wrought cutting blades made of chrome
vanadium steel, highly resistant to wear.
3. Special finish for the cutting edges.
4. Includes Allen key for the user.
LIGHT
SPARE PARTS
1. 1. All available.
REF
grs
mm
3588D-40
579871
6
697
400
3588D-50
579895
6
745
500
3588D-60
579918
6
803
600
3588D-75
011616
6
896
750
UNIVERSAL
13
loppers
BELLOTA PROFESSIONAL PRUNING SHEARS
max.
30
mm.
Light vineyard shear
REF. 3589
CUTTING
CAPACITY
USE
Especially designed for vineyard
pruning and picking. WROUGHT
ADVANTAGES
1.Light shear: reduces fatigue at the end of
the work shift.
2. Easy access to complicated cutting areas:
long and thin blade shape.
EASY-ADJUST
3. Easy and clean cut: perfect penetration
and sliding of the cutting blade on the
branch.
4. Patented and exclusive EASY-ADJUST joint
system: precise, simple and stable.
5. Maximum ergonomics: exclusive shock
absorber design.
LIGHT
FEATURES
1.Light aluminium handles.
2. Wrought cutting blades made of chrome
vanadium steel, highly resistant to wear.
3. Special finish for the cutting edges.
4. Includes Allen key for the user.
SPARE PARTS
1. All available.
REF
14
grs
mm
3589-40
579932
6
645
400
3589-50
579956
6
698
500
loppers
BELLOTA PROFESSIONAL PRUNING SHEARS
Fruit anvil shear
REF. 3581-80
max.
xx
40
mm.
CUTTING
CAPACITY
USE
Especially designed for pruning fruit
trees, dry and hard wood.
ADVANTAGES
1.Patented and exclusive EASY-ADJUST joint
system: precise, simple and stable.
WROUGHT
2.Clean and homogeneous cut: perfect
penetration of the cutting blade on the
branch.
3.Easy and convenient cut: strength
multiplication system.
EASY-ADJUST
4.Maximum cutting head durability.
FEATURES
1.Fully wrought cutting head made of chrome
vanadium steel, highly resistant to wear.
FRUIT
2.Special finish on both sides of the cutting
blade.
3.Technical aluminium anvil that is perfectly
fastened to the support; easily replaceable.
4.Elliptical anodised aluminium handles with
elastomer grips.
SPARE PARTS
1. All available.
REF
3581-80
593495
6
grs
mm
1.137
800
15
01
02
PRUNING
SHEARS
Bellota´s pruning shears stand out because of their
lightness, robustness and ergonomics. For Bellota, the
comfort of professional pruners is very important, and for
this reason, we make a strong R&D effort in order to offer
the textures and materials that make the work of farmers
more comfortable. This effort translates into products that
are unique in the market, such as snipers with bi-material
handles, or pruning shears models with tri-material handles.
pruners
BELLOTA PROFESSIONAL PRUNING SHEARS
max.
25
mm.
CUTTING
CAPACITY
Tri-material handle
pruning shear
REF. 3510-21 & 3510-22
USE
General pruning.
ERGONOMIC
ADVANTAGES
1.Patented and exclusive EASY-ADJUST joint
system: precise, simple and stable.
2.Clean and efficient cut.
EASY-ADJUST
3.Ergonomic handles, perfectly adapted to
the user´s hand.
4.Tri-material handles that are unique in the
market.
FEATURES
ALUMINIUM
1.Cutting blades made of chrome vanadium
steel, highly resistant to wear.
2.Wrought aluminium shear body.
3.3510-22: Special for large hands.
SPARE PARTS
1. All available.
UNIVERSAL
REF
18
grs
mm
3510-21
549775
6
260
210
3510-22
549799
6
270
220
pruners
BELLOTA PROFESSIONAL PRUNING SHEARS
Tri-material handle
serrated counter-blade
pruning shear
REF. 3510-21D
max.
25
mm.
CUTTING
CAPACITY
USE
General pruning.
ADVANTAGES
ERGONOMIC
1.Patented and exclusive EASY-ADJUST joint
system: precise, simple and stable.
2.Clean and efficient cut.
3.Ergonomic handles, perfectly adapted to the
user´s hand.
EASY-ADJUST
4.Tri-material handles that are unique in the
market.
5. Minimal cutting effort: serrated counter-blade,
maximises stability for easier cutting.
FEATURES
ALUMINIUM
1.Serrated counter-blade.
2.Cutting blades made of chrome vanadium
steel, highly resistant to wear.
3.Wrought aluminium shear body.
SPARE PARTS
UNIVERSAL
1. All available
SERRATED
REF
3510-21D
565638
6
grs
mm
260
210
19
pruners
BELLOTA PROFESSIONAL PRUNING SHEARS
Snipers
REF. 3622 INOX CEMB
ERGONOMIC
USE
Grape and fruit harvesting. Cutting in
areas with difficult access.
LIGHT
ADVANTAGES
1.Light and ergonomic shear: convenient
tool grip.
INOX
STAINLESS
2.Maximum durability and minimum wear of
the cutting blades: special stainless steel.
3.Easy access to stems and difficult areas.
4.Minimum fatigue: shock absorber
integrated into the handle.
FEATURES
1.Bypass-type blade design; thin and long.
2.Adjustable pin system.
3.Self-cleaning groove to evacuate sap.
SPARE PARTS
1. Spring and shock absorber.
REF
3622 INOX CEMB
20
588255
24
grs
mm
88
185
pruners
BELLOTA PROFESSIONAL PRUNING SHEARS
Snipers
REF. 3623 INOX CEMB
ERGONOMIC
USE
Grape and fruit harvesting. Cutting in
areas with difficult access.
ADVANTAGES
LIGHT
1.Light and ergonomic shear: convenient
tool grip.
2.Maximum durability and minimum wear of
the cutting blades: special stainless steel.
3.Easy access to stems and difficult areas.
4.Minimum fatigue: shock absorber
integrated into the handle.
INOX
STAINLESS
5.The shape of the cutting blade avoids
damaging harvested grape clusters and
fruit.
FEATURES
1.Bypass-type blade design; long and curved.
CURVED
BLADE
2.Adjustable pin system.
SPARE PARTS
1. Spring and shock absorber.
REF
3623 INOX CEMB
588231
24
grs
mm
80
185
21
pruners
BELLOTA PROFESSIONAL PRUNING SHEARS
Snipers
REF. 3624 INOX CEMB
ERGONOMIC
USE
Especially indicated for grape
harvesting.
LIGHT
ADVANTAGES
1.Light and ergonomic shear: convenient
tool grip.
INOX
STAINLESS
2.Maximum durability and minimum wear of
the cutting blades: special stainless steel.
3.Easy access to stems and difficult areas
4.Minimum fatigue: shock absorber
integrated into the handle.
5.The shape of the cutting blade avoids
damaging both harvested grape clusters
and fruit.
FEATURES
1.Bypass-type blade design; long and
straight.
2.Adjustable pin system.
SPARE PARTS
1. Spring and shock absorber.
REF
3624 INOX CEMB
22
588279
24
grs
mm
80
186
pruners
BELLOTA PROFESSIONAL PRUNING SHEARS
Snipers
REF. 3625 INOX CEMB
ERGONOMIC
USE
Fruit and flower harvesting.
ADVANTAGES
1.Light and ergonomic shear: convenient
tool grip.
2.Maximum durability and minimum wear of
the cutting blades: special stainless steel.
LIGHT
INOX
3.Easy access to stems and difficult areas.
4.Minimum fatigue: shock absorber
integrated into the handle.
STAINLESS
5.The shape of the cutting blade avoids
damaging harvested fruit.
FEATURES
1.Bypass-type blade design; short and
curved.
CURVED
BLADE
2.Adjustable pin system.
SPARE PARTS
1. Spring and shock absorber.
REF
3625 INOX CEMB
588293
24
grs
mm
77
160
23
pruners
BELLOTA PROFESSIONAL PRUNING SHEARS
Snipers
REF. 3628 INOX CEMB
ERGONOMIC
USE
Especially designed for harvesting
grapes and fruit, as well as cutting and
pruning small stems.
LIGHT
ADVANTAGES
INOX
1.Light and ergonomic shear: convenient
tool grip.
2.Maximum durability and minimum wear of
the cutting blades: special stainless steel.
STAINLESS
3.Easy access to stems and difficult areas.
4.Minimum fatigue: shock absorber
integrated into the handle.
FEATURES
1.Bypass-type blade design.
2.Adjustable pin system.
SPARE PARTS
1. Spring and shock absorber.
REF
3628 INOX CEMB
24
588316
24
grs
mm
82
172
pruners
BELLOTA PROFESSIONAL PRUNING SHEARS
Snipers
REF. 3629 INOX GR25MB
ERGONOMIC
USE
Especially designed for harvesting
grapes and fruit, as well as cutting
garlic stems.
LIGHT
ADVANTAGES
1.Light and ergonomic shear: convenient
tool grip.
2.Maximum durability and minimum wear of
the cutting blades: special stainless steel.
3.Easy access to stems and difficult areas.
INOX
STAINLESS
4.Minimum fatigue: shock absorber
integrated into the handle.
FEATURES
1.Bypass-type blade design with a long and
straight cutting blade.
2. Adjustable pin system.
SPARE PARTS
1. Spring and shock absorber.
REF
3629 INOX GR25MB
588330
25
grs
mm
83
203
25
BELLOTA PROFESSIONAL PRUNING SHEARS
replacement parts
REPLACEMENT PARTS
TWO-HAND PRUNING SHEARS
DESCRIPTION
REF
REF TOOLS DESTINATION
Replacement blade
3578-H
551068
6
3578, 3578D
Replacement counter-blade
3578-CH
551082
6
3578
Replacement serrated counter-blade
3578-CHD
551105
6
3578D
Shock absorber
3578-A
551129
6
3578, 3578D, 3580,3588D,3589
Pin + nut
3578-BT
551143
6
3578, 3578D, 3580 , 3588D, 3589
Shear handle 400 mm
3578-M40
028218
6
3578, 3578D, 3580
Shear handle 450 mm
3578-M45
551167
6
3578, 3578D, 3580
Shear handle 500 mm
3578-M50
551181
6
3578, 3578D, 3580
Shear handle 600 mm
3578-M60
551204
6
3578, 3578D, 3580
Shear handle 750 mm
3578-M75
594959
6
3578, 3578D, 3580
Shear handle 900 mm
3578-M90
231199
6
3578, 3578D, 3580
Replacement blade
3580-H
566628
6
3580
Replacement counter-blade
3580-CH
566642
6
3580
Replacement blade
3588H
579970
6
3588D
Replacement counter-blade
3588DCH
579994
6
3588D
Shear handle 400 mm
3588-M40
580051
6
3588D, 3589
Shear handle 500 mm
3588-M50
580075
6
3588D, 3589
Shear handle 600 mm
3588-M60
580099
6
3588D, 3589
Shear handle 750 mm
3588-M75
594973
6
3588D, 3589
Replacement blade
3589H
580013
6
3589
Replacement counter-blade
3589CH
580037
6
3589
Cutting blade
3581H
057713
6
3581-80
Counter-blade + pressurised cap
3581CH
593754
6
3581-80
Pin + nut + screw
3581BT
046601
6
3581-80
Aluminium anvil + 2 screws with washers + limiter screw
3581Y
593785
6
3581-80
Multiplier arm + 2 pivoting screws + sliding cap
3581BM
593808
6
3581-80
2 handles + 2 adaptors + 4 screws + 4 ridged nuts
3581M
593822
6
3581-80
replacement parts
BELLOTA PROFESSIONAL PRUNING SHEARS
one hand Pruning Shears
DESCRIPTION
REF
REF TOOLS DESTINATION
Replacement blade
3510-H
551228
6
3510-21 , 3510D-21, 3510-22
Replacement counter-blade
3510-CH
551242
6
3510-21 , 3510-22
Closing lock
3510-S
551280
6
3510-21 , 3510D-21 , 3510-22
Soft spring + hard spring + shock absorber
3510-MA
551266
6
3510-21 , 3510D-21 , 3510-22
Pin + nut
3510-BT
551303
6
3510-21 , 3510D-21 , 3510-22
Shear blade handle 210mm
3510-21H
551327
6
3510-21 , 3510D-21
Shear blade handle 220mm
3510-22H
551341
6
3510-22
Shear counter-blade handle 210mm
3510-21C
551365
6
3510-21 , 3510D-21
Shear counter-blade handle 220mm
3510-22C
551389
6
3510-22
12
3622INOXCEMB,3623INOXCEMB,3624INOXCEMB,
3625INOXCEMB,3628INOXCEMB,3628INOXCEMB
Spring and shock absorber
3622 INOX MA
593723