drop deck platform

drop deck platform
Features and Benefits
Drop deck platform
• Square™ lightening holes in mainframe, 2´rub rail with stake pockets on 24” centers and single pipe spools between
stake pockets reduce trailer weight and serve as tie downs for storing dunnage
• 1 1/8” apitong wood floor with 5/16” screws, two screws/board/cross member provides stronger, longer-lasting decking
• Access to the air and electrical systems, including hoses, cylinders, valves, etc., ensures easy maintenance
• Cross member placement on 18” centers with 12” (optional) facilitates a concentrated load package which equates
to a longer floor life
• Hydraulic trailer positioners allow all welds to be made in the flat position ensuring weld uniformity throughout
the product
• Four knee braces on each side of the lower deck ensure stronger side rails
• Steel wheel covers allow lower rear height for easier loading
• Axle beam (5/8” wall) rating with air bag rated at 25,000 lbs ensures a smoother ride and better service
• Full-width gooseneck ensures easy loading and unloading
All Kalyn Siebert trailers are engineered to exceed
the toughest standards in the industry, delivering:
• Electric dump valve for the rear axle makes low-speed (5 mph) turns easier
•Maximum strength at low tare weights
• Two-beam design with machine welded T-1 steel construction ensures maximum strength-to-weight ratio
•Lowest maintenance costs
•Longest service life
•The highest possible return on investment
You can rest assured that our trailers protect
your payload and investment.
That’s the Kalyn Siebert Advantage.
Kalyn Siebert Drop Deck Platform
trailers are built for equipment that
just doesn’t fit on a standard trailer. By lowering the platform height,
you can haul general freight that is too tall for a regular platform
trailer. These trailers are designed with customization in mind, with
options such as steel tread plates, open floors, and your choice of
suspension and axle spacing.
1505 West Main Street
Gatesville, TX 76528
Phone: 254-248-3327
www.KalynSiebert.com
ENGINEERED TO PERFORM. BUILT TO LAST.
© 2013 Kalyn Siebert
Kalyn siebert Trailer advantage
Drop Deck Platform Specifications
Kalyn Siebert trailers are engineered to perform and built to last – so you can rest assured our trailers will protect your payload
and deliver a solid return on your investment.
Capacity
80,000 lbs distributed in 48’ 0”/ 60,000 lbs concentratedin 10’ 0”
Overall Dimensions
8’ 6” nominal wide X 48’ nominal length
HIGH PERFORMANCE PRODUCT
Deck Length
Upper deck length 10’ nominal, lower deck length 38’ nominal
Our commitment to quality means more time on the road:
Deck Heights, Loaded
Lower deck height 40” at rear at rated capacity, upper deck height 61” at rated capacity
Weight
2 Axle: 11,175 lbs + 3% tolerance. For trailers other than standard specification, weight and dimensional drawing
will be provided by plant after order is received and accepted
3 Axle: 13,120 lbs + 3% tolerance. For trailers other than standard specification, weight and dimensional drawing
will be provided by plant after order is received and accepted
• A lower center of gravity allows the load to set closer to the ground, providing added stability and less chance of rollover
Landing Gear
Two-speed landing gear with roadside crank handle
• 3-year warranty on paint, 5-year prorated warranty on the frame exceeds most competitors, protecting your investment
Swing Clearance
84”
Axles
Three axles, OEM, 5” round with 5/8” wall, tapered spindles, 25,000 lb capacity
Suspension
Ridewell Air Ride, 60” spread between each axle. Electric dump is optional
Brakes
12¼” x 7½” air. Parking brakes on all axles
Slack Adjusters
Automatic; parking brakes on both axles
ABS
4S/2M, both axles
Hubs
10 stud, hub piloted, long studs, steel hub
Drums
Cast drum
Seals
Oil
Wheels
Steel disc wheels, 8.25” X 22.5”
Tires
OEM, 255/70R22.5, 16PR (low profile) radial tires
• All welds are made in the flat position to ensure weld uniformity throughout the product
Upper Coupler
2” pin, 18” setting, 49” fifth wheel height
• Beams are welded on both sides of the flange/web interface to eliminate opportunity for rust intrusion
Cross Members
16” centers, 4” junior I-beams
Beams
130,000 psi yield flanges with 80,000 psi yield web, 24” deep main rails and 6” side channels
Floor
1 1/8” apitong with screws on every cross member
Rub Rail, Stake Pockets
and Pipe Spools
2 X 5/16” rub rail, 24” centers for stake pockets, and single pipe spools as standard
Winch Track
Outside channel both sides, upper and lower decks is notched for winches. Winches are an option
Lights and Electrical
Sealed beam with mid-turn signal, 12 volt, 7-way plug
Mudflaps
Black anti-spray with Kalyn Siebert logo
HIGH PERFORMANCE TEAM
Finishing
Aluminum diamond plate at rear of upper deck and rear lights
Our outstanding team of experts stands behind every trailer we produce:
Conspicuity Tape
3M; Discontinuous on sides
• Our 98% on-time delivery record means we meet our commitments, so you can meet yours
Manual
One operator manual per order will be provided. Parts manual available as option
• Trailers are load tested at 2 times rated capacity before leaving the factory, so they are ready to go to work for you
• Maximum strength at low tare weights allows you to increase your payload with more or heavier loads
• The longest service life and replacement cycle in the industry give you a great return on your investment
HIGH PERFORMANCE CONSTRUCTION
Our rigorous construction standards ensure long-lasting, high-performance results:
• High tensile strength steel and computer stress analysis produce trailers that are as light as possible yet strong enough to
deliver maximum loads
• Metal surfaces are shot blasted prior to painting for optimum paint adhesion, preventing rust and adding to trailer longevity
• Epoxy primer and polyurethane paints are applied via High Volume Low Pressure (HVLP) paint system, with careful
monitoring of paint thickness, to provide a long-life, high-quality paint finish
• Air, electric, and hydraulic lines are:
-Installed after painting to lessen the impact of an en-route DOT inspection
-Routed inside the flex track to avoid potential stretching or pinching of the lines during sliding operations
• All four corners of main beams are welded continuously to eliminate bleed-through rusting
• High-density, low-moisture apitong wood decking is standard, to add resistance to fungus and termites and promote
long deck life
• Recessed carriage bolts and floor clips (not screws) allow proper movement of the wood floor boards during loading,
preventing breakage
• Air ride is standard, for improved stability and a smoother ride
2 AXLE, 40 TON
Rear View
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
48’
10’-0”
38’
48”
16”
84”
18”
40”
121”
N/A
2’-7”
40”
2.5”
43’-11”
8’-6”
77”
All dimensions are at rated payload
3 Axle, 40 TON
• With certified welders and the most experienced craftsmen in the industry, we produce the highest quality trailer on
the market— giving you a great return on your investment
• Our experienced parts support team and streamlined parts replacement process ensure you quickly get the right
replacement part on every order
• The most experienced technical support team in the industry is ready to help with any need, from point of order to
in-the-field service
Rear View
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
48’
10’-0”
38’
48”
16”
84”
18”
40”
60”
60”
2’-7’
40”
2.5”
43’-11”
8’-6”
77”
All dimensions are at rated payload
To learn more or find a Kalyn Siebert distributor, call 254-248-3327 or visit www.KalynSiebert.com.
To learn more or find a Kalyn Siebert distributor, call xxx-xxx-xxxx or visit www.KalynSiebert.com.