PGI Valve Fittings

Transcription

PGI Valve Fittings

&
VALVE F ITTINGS
W ELLHEAD C OMPONENTS
6A-1740
www.pgiint.com
MANUFACTURER OF STANDARD AND SPECIALTY FITTINGS AND COMPONENTS CONFORMING TO NACE, API AND ANSI SPECIFICATIONS
featuring positive flow ball support
VENTED CAP BODY GREASE FITTINGS
Our standard body grease fitting features the Positive
VENT CAP
BODY BALL
Flow Ball Support. This design directs the flow of the
lubricant and/or sealant through the center of the spring
without passing through the spring coil, reducing the
tendency to “pack-off.” The Positive Flow Ball Support is
available in many other fitting styles.
Another feature of the standard body grease fitting is the
heavy-duty radial rivet crimp. This special crimp provides
the best “blow-out” protection of any available crimped
style fitting. The radial rivet crimp process conforms to
the latest revision of NACE.
POSITIVE FLOW
BALL SUPPORT
SPRING
HEAVY-DUTY
RADIAL RIVET
CRIMP
LUBRICANT FLOW
(90° ROTATION VIEW)
Lubricant passes around the ball and through
the center of the ball support and spring,
without passing through the spring coil.
Vented Cap Body Grease Fittings
VENT CAP,
1-1/4" HEX
THREAD
SIZE
MATERIAL
PART NO.
PLATING
1215
BG10N8-10
1" NPT
316 SS
BG10N8-C0
HEAT TREATMENT
BALL
Zinc
---
**CA**
---
Annealed (NACE)
K-Monel
4140
BG10N8-80
Zinc
1215
BG10N6-10
Zinc
---
316 SS
BG10N6-C0
---
Annealed (NACE)
SPRING
302 SS
®
Rc 22 Max (NACE)
**CA**
Inconel
X-750
302 SS
1"-14 UNS
3/4" NPT
K-Monel
BALL
1" TO 1-5/16"
WRENCH HEX
POSITIVE FLOW
BALL SUPPORT
1/2" NPT
SPRING
1/4" TO 1"
NPT THREAD
3/8" NPT
HEAVY-DUTY
RADIAL RIVET
CRIMP
1/4" NPT
4140
BG10N6-80
Zinc
Rc 22 Max (NACE)
1215
BG10N4-10
Zinc
---
316 SS
BG10N4-C0
---
Annealed (NACE)
4140
BG10N4-80
Zinc
Rc 22 Max (NACE)
1215
BG10N3-10
Zinc
---
316 SS
BG10N3-C0
---
Annealed (NACE)
4140
BG10N3-80
Zinc
Rc 22 Max (NACE)
1215
BG10N2-10
Zinc
---
316 SS
BG10N2-C0
---
Annealed (NACE)
4140
BG10N2-80
Zinc
Inconel
X-750
**CA**
302 SS
K-Monel ®
Inconel
X-750
**CA**
302 SS
K-Monel ®
Inconel
X-750
**CA**
K-Monel
For Service to 10,000 PSI
®
302 SS
®
Rc 22 Max (NACE)
Inconel
X-750
Vented Cap Body Grease Fittings with Giant Button Head
THREAD
SIZE
1" NPT
MATERIAL
PART NO.
PLATING
HEAT TREATMENT
BALL
1215
BH10N8-10
Zinc
---
**CA**
316 SS
BH10N8-C0
---
Annealed (NACE)
K-Monel
3/4" NPT
1/2" NPT
4140
BH10N8-80
Zinc
1215
BH10N6-10
Zinc
---
316 SS
BH10N6-C0
---
Annealed (NACE)
4140
BH10N6-80
Zinc
Rc 22 Max (NACE)
1215
BH10N4-10
Zinc
---
316 SS
BH10N4-C0
---
Annealed (NACE)
4140
BH10N4-80
Zinc
1215
BH10N3-10
Zinc
---
316 SS
BH10N3-C0
---
Annealed (NACE)
302 SS
K-Monel ®
Inconel
X-750
**CA**
BH10N3-80
Zinc
1215
BH10N2-10
Zinc
---
316 SS
BH10N2-C0
---
Annealed (NACE)
**CA**
BH10N2-80
Zinc
**CA**
Rc 22 Max (NACE)
PLEASE CONSULT FACTORY FOR PRODUCT AVAILABILITIES. **CA=AISI 52100 Chrome Alloy ~ Other materials and plating available upon request.
2
PGI International
16101 Vallen Drive • Houston, Texas 77041 • 713-744-9880 • 1-800-231-0233 • Fax: 713-744-9881
Inconel
X-750
302 SS
®
Rc 22 Max (NACE)
K-Monel
4140
302 SS
®
Rc 22 Max (NACE)
4140
Inconel
X-750
**CA**
K-Monel
1/4" NPT
302 SS
®
Rc 22 Max (NACE)
K-Monel
3/8" NPT
SPRING
Inconel
X-750
302 SS
®
Inconel
X-750
P
featuring free flow design
BODY
VENT CAP
BALL SPRING RETAINER
BODY
T
he Free Flow fitting utilizes a unique spring retainer that is threaded
into the body of the fitting. This special retainer also acts as a ball
support and spring guide, and its design allows for the Free Flow of
lubricants and sealant around the spring, instead of through it.
BALL SPRING RETAINER
• Only unrestricted flow path on the market – the straight-line
passageway significantly reduces tendency to “pack off.”
UNRESTRICTED
LUBRICANT FLOW
UNRESTRICTED
LUBRICANT FLOW
UNRESTRICTED
LUBRICANT FLOW
When the ball is off the seat, lubricant flows
unrestricted around the spring and through
the openings on the sides of the retainer.
• Guaranteed against “Blow Out” when used within design
limitations of the fitting. Excellent in extreme cold environments.
• Increased flow rates due to the unrestricted flow path.
• Meets latest revision of NACE – no cold working of materials.
END VIEW
Free Flow Vented Cap Body Grease Fittings
THREAD
SIZE
1" NPT
MATERIAL
PART NO.
PLATING
HEAT TREATMENT
BALL
**CA**
1215
BG22N8-10
Zinc
---
316 SS
BG22N8-C0
---
Annealed (NACE)
K-Monel
3/4" NPT
1/2" NPT
4140
BG22N8-80
Zinc
Rc 22 Max (NACE)
1215
BG22N6-10
Zinc
---
316 SS
BG22N6-C0
---
Annealed (NACE)
4140
BG22N6-80
Zinc
Rc 22 Max (NACE)
1215
BG22N4-10
Zinc
---
316 SS
BG22N4-C0
---
Annealed (NACE)
4140
BG22N4-80
Zinc
Rc 22 Max (NACE)
1215
BG22N3-10
Zinc
---
316 SS
BG22N3-C0
---
Annealed (NACE)
SPRING
302 SS
®
Inconel
X-750
VENT CAP,
1-1/4" HEX
**CA**
302 SS
K-Monel ®
Inconel
X-750
1"-14 UNS
**CA**
302 SS
BALL
K-Monel ®
Inconel
X-750
**CA**
302 SS
K-Monel ®
Inconel
X-750
1" TO 1-5/16"
WRENCH HEX
SPRING
3/8" NPT
1/4" NPT
4140
BG22N3-80
Zinc
1215
BG22N2-10
Zinc
---
316 SS
BG22N2-C0
---
Annealed (NACE)
Rc 22 Max (NACE)
**CA**
K-Monel
BG22N2-80
4140
Zinc
RETAINER
1/4" TO 1"
NPT THREAD
302 SS
®
Rc 22 Max (NACE)
Inconel
X-750
Free Flow Vented Cap Body Grease Fittings with Giant Button Head
THREAD
SIZE
MATERIAL
PART NO.
PLATING
1215
BH22N8-10
1" NPT
316 SS
BH22N8-C0
HEAT TREATMENT
BALL
Zinc
---
**CA**
---
Annealed (NACE)
K-Monel
3/4" NPT
1/2" NPT
4140
BH22N8-80
Zinc
Rc 22 Max (NACE)
1215
BH22N6-10
Zinc
---
316 SS
BH22N6-C0
---
Annealed (NACE)
4140
BH22N6-80
Zinc
Rc 22 Max (NACE)
1215
BH22N4-10
Zinc
---
316 SS
BH22N4-C0
---
Annealed (NACE)
3/8" NPT
1/4" NPT
BH22N4-80
Zinc
Rc 22 Max (NACE)
1215
BH22N3-10
Zinc
---
316 SS
BH22N3-C0
---
Annealed (NACE)
4140
BH22N3-80
Zinc
Rc 22 Max (NACE)
1215
BH22N2-10
Zinc
---
316 SS
BH22N2-C0
---
Annealed (NACE)
4140
BH22N2-80
Zinc
Rc 22 Max (NACE)
302 SS
®
Inconel
X-750
VENT CAP,
1-1/4" HEX
**CA**
302 SS
K-Monel ®
Inconel
X-750
1"-14 UNS
**CA**
302 SS
BALL
Inconel
X-750
1" TO 1-5/16"
WRENCH HEX
K-Monel
4140
SPRING
®
**CA**
302 SS
K-Monel ®
Inconel
X-750
**CA**
302 SS
K-Monel ®
Inconel
X-750
SPRING
RETAINER
1/4" TO 1"
NPT THREAD
**CA=AISI 52100 Chrome Alloy ~ Other materials and plating available upon request. PLEASE CONSULT FACTORY FOR PRODUCT AVAILABILITIES.
PGI International
3
H I G H P R E S S U R E L U B R I C AT I O N A N D S E A L A N T F I T T I N G S
Blowdown Fitting
1/2" NPT
Blowdown Fitting
9/16" Autoclave Style
PART NO.
HP11S9-F0
PART NO.
HP10N4-F0
VENT CAP,
1-1/4" HEX, 316 SS
VENT CAP, 1-1/4" HEX, 316 SS
1-1/4" WRENCH HEX, 17-4 PH
NITRIDED FOR NON-GALLING
1-1/4" WRENCH HEX,
17-4 PH NITRIDED FOR
NON-GALLING
BODY, 17-4 PH,
1-1/4" WRENCH HEX
BODY, 17-4 PH,
1-1/4" WRENCH HEX
STINGER NITRIDED, 17-4 PH
FLOATING STYLE TO PREVENT
GALLING OF SEAT
STINGER NITRIDED,
17-4 PH FLOATING STYLE TO
PREVENT GALLING OF SEAT
VITON® O-RING AND BACKUP RING
TO PREVENT LEAKAGE WHEN
VENTING (2 PLACES)
VITON® O-RING AND BACKUP
RING TO PREVENT LEAKAGE
WHEN VENTING (2 PLACES)
BALL, 1/4" O TUNGSTEN CARBIDE
POSITIVE FLOW BALL SUPPORT
SPRING, INCONEL X-750
BALL,
1/4" O TUNGSTEN CARBIDE
1-1/8"-12 UNF THREADS
316 SS FLOATING CONE WITH
O-RING AND BACKUP RING.
PREVENTS GALLING OF VALVE SEAT
AND LEAKAGE THROUGH
THREADS.
1/2" NPT THREADS
HEAVY-DUTY
RADIAL RIVET CRIMP
Lubrication (Sealant) Fitting
Packing Injection Fitting
PART NO.
HP12S9-F0
PART NO.
HP13S9-F0
3/4" WRENCH HEX, 316 SS
NITRIDED TO PREVENT
GALLING OF THREADS
VENT CAP, 1-1/4" HEX,
316 SS
SAFETY VENT
BALL, 1/4" O TUNGSTEN
CARBIDE
POSITIVE FLOW
BALL SUPPORT
BODY, 17-4 PH,
1-1/8" WRENCH HEX
BODY, 17-4 PH, 1-1/4"
WRENCH HEX
BALL,
1/4" O TUNGSTEN CARBIDE
316 SS FLOATING CONE
WITH O-RING AND
BACKUP RING. PREVENTS
GALLING OF VALVE SEAT
AND LEAKAGE THROUGH
THREADS.
316 SS FLOATING CONE WITH
O-RING AND BACKUP RING.
PREVENTS GALLING OF VALVE
SEAT AND LEAKAGE
THROUGH THREADS.
PLEASE CONSULT FACTORY FOR PRODUCT AVAILABILITIES. Other materials available upon request.
4
PGI International
with floating
ball-taper cavity
McEvoy® Style Grease Fittings
McEvoy® Style Compound Fittings
VENT CAP, 1-1/4" HEX
VENT CAP, 7/8"-14 HEX
1"-14 UNS
7/8"-14 UNS
1" WRENCH HEX
1" WRENCH HEX
2-5/16"
2-5/16"
BALL
BALL
3/4"-16 UNF
3/4"-16 UNF
PIN
PIN
3/4" - 16 UNF ENGAGEMENT THREAD
7/8" - 14 UNS CAP THREAD
3/4" - 16 UNF ENGAGEMENT THREAD
1" - 14 UNS CAP THREAD
MATERIAL
PART NO.
PLATING
1215
316 SS
4140
BGF1-MCE
BGF1-MCE-2
BGF1-MCE-3
Zinc
--Zinc
HEAT TREATMENT
BALL
MATERIAL
PART NO.
PLATING
1215
316 SS
4140
BGF78-MCE
BGF78-MCE-2
BGF78-MCE-3
Zinc
--Zinc
**CA**
--Annealed (NACE) K-Monel ®
Rc 22 Max (NACE) K-Monel ®
HEAT TREATMENT
BALL
**CA**
--Annealed (NACE) K-Monel ®
Rc 22 Max (NACE) K-Monel ®
PRESSURE RELIEF TOOLS
Pressure Relief Tool
with Bleeder
FOR 1" - 14 UNS VENTED CAP FITTINGS
1/2" NPT VENT PORT
for Packing
Injection Fittings
FOR 1" - 14 UNS VENTED CAP FITTINGS
1/2" NPT VENT PORT WITH BLEEDER VALVE
MATERIAL
PART NO.
MATERIAL
PART NO.
PLATING
1215
4140
PR11S8-10
PR11S8-80
1215
PR12S8-10
Zinc
.PART NO.
F2-021-10
PGI International
5
FITTING ACCESSORIES
Giant Button
Head Coupler
Grease Gun Lube Adapter
SAFETY VENT HOLE
NUT
SWIVEL
(SWIVEL + NUT)
ADAPTS TO GREASE GUN VIA 1/4" NPT MALE THREADS
MATERIAL
SWIVEL
NUT
1215
4140
4140
1215
1215
4140
1215
4140
THREAD SIZE
(NUT)
1" - 14 UNS
7/8" - 14 UNF
3/4" - 16 UNF
ADAPTS TO GREASE GUN VIA
1/4" NPT FEMALE THREADS
.PART NO.
LA10S8-10
LA10S8-80
LA10S8-10-T3
LA10S7-10
LA10S6-10
‡ WKM Style.
ADAPTS TO GREASE GUN VIA
1/4" NPT FEMALE THREADS
MATERIAL
PART NO.
PLATING
MATERIAL
PART NO.
PLATING
1215
BHC78
Zinc
1215
BHC78-TE
Zinc
‡
Repair Kit: BHC78-RPR-KIT
Safe Vent Coupler
NEEDLE STOP
Giant Button Head
Coupler – Top Entry
Combination Lube Adapter
FREE FLOW RETAINER
SAFETY VENT HOLE
NEEDLE
SAFETY
VENT
HOLE
GREASE GUN LUBE ADAPTER WITH PRESSURE RELEASE AND
CHECK. ADAPTS TO GREASE GUN HOSE VIA 1/4" NPT FEMALE PORT.
(CAN BE PURCHASED WITH OR WITHOUT LUBE ADAPTER)
MATERIAL
NUT SWIVEL
----1215
4140
1215
4140
1215
4140
1215
4140
.PART NO.
LUBE ADAPTER
THREAD SIZE
SV22N2-80
SV22N2-80-L1
SV22N2-80-L2
SV22N2-80-L3
SV22N2-80-L4
N/A*
1" - 14*
1" - 14*
7/8" - 14*
3/4" - 16*
* Shown above
without lube
adapter.
THREAD SIZE
(NUT)
PLATING
Zinc
Zinc
Zinc
Zinc
Zinc
GREASE GUN LUBE ADAPTER
WITH GIANT BUTTON HEAD AND BALL CHECK
‡
MATERIAL
NUT SWIVEL
1" - 14 UNS
1215
4140
7/8" - 14 UNF
3/4" - 16 UNF
1215
1215
4140
4140
.PART NO.
LA10S8-10-T2
LA10S8-10-T2T3
LA10S7-10-T2
LA10S6-10-T2
‡ WKM Style.
PLEASE CONSULT FACTORY FOR PRODUCT AVAILABILITIES.
6
PGI International
PLATING
Zinc
Zinc
‡
Zinc
Zinc
‡ WKM Style.
featuring
free flow design
PA C K I N G / B O N N E T I N J E C T I O N F I T T I N G S
STINGER
SAFETY
HEX BODY
VENT HOLE
T
he Free Flow design of the Body Grease Fitting has been
incorporated into our Packing Injection Fittings. Compared to
standard floating ball designs, the Free Flow’s specially designed
spring retainer allows even the heaviest of lubricants and/or
sealant to flow freely through the Packing Injection Fitting.
STINGER
SAFETY
HEX BODY
VENT HOLE
BALL SPRING FREE FLOW
SPRING
RETAINER
• Positive back seating is provided without relying on
thepresence of back pressure.
• Guaranteed against “Blow Out” when used within
design limitations of the fitting. Excellent in extreme
cold environments.
LUBRICANT
FLOW
• Meets latest revision of NACE – no cold working of materials.
LUBRICANT
FLOW
LUBRICANT
FLOW
When the ball is off the seat, lubricant flows
unrestricted around the spring and through
the openings on the sides of the retainer.
Free Flow Packing Injection Fittings
THREAD
SIZE
1/2" NPT
3/8" NPT
1/4" NPT
MATERIAL
PART NO.
PLATING
HEAT TREATMENT
BALL
SPRING
Zinc
---
**CA**
302 SS
K-Monel ®
Inconel
X-750
1215
PF22N4-10
316 SS
PF22N4-C0
---
Annealed (NACE)
4140
PF22N4-80
Zinc
Rc 22 Max (NACE)
1215
PF22N3-10
Zinc
---
316 SS
PF22N3-C0
---
Annealed (NACE)
4140
PF22N3-80
Zinc
Rc 22 Max (NACE)
1215
PF22N2-10
Zinc
---
316 SS
PF22N2-C0
---
Annealed (NACE)
4140
PF22N2-80
Zinc
Rc 22 Max (NACE)
**CA**
302 SS
K-Monel ®
Inconel
X-750
**CA**
302 SS
K-Monel ®
Inconel
X-750
3/4" WRENCH
HEX STINGER
SAFETY VENT
HOLE
7/8" WRENCH
HEX
BALL
SPRING
1/4" TO 1/2" NPT
RETAINER
Packing Injection Fittings (Floating Ball-Taper Cavity)
THREAD
SIZE
1/2" NPT
MATERIAL
PART NO.
PLATING
HEAT TREATMENT
BALL
1215
PF10N4-10
Zinc
---
**CA**
316 SS
PF10N4-C0
---
Annealed (NACE)
4140
PF10N4-80
Zinc
Rc 22 Max (NACE)
3/4" WRENCH
HEX STINGER
K-Monel ®
**CA**
1215
PF10N3-10
Zinc
---
316 SS
PF10N3-C0
---
Annealed (NACE)
4140
PF10N3-80
Zinc
Rc 22 Max (NACE)
1215
PF10N2-10
Zinc
---
316 SS
PF10N2-C0
---
Annealed (NACE)
4140
PF10N2-80
Zinc
Rc 22 Max (NACE)
3/4" - 10 UNC
1215
PF13S6-10
Zinc
---
302 SS
BALL
5/8" - 11 UNC
1215
PF12S5-10
Zinc
---
302 SS
SEE THREAD SIZE
3/8" NPT
SAFETY VENT
HOLE
K-Monel ®
1/4" NPT
7/8" WRENCH
HEX
**CA**
K-Monel ®
PIN
PGI International
7
GIANT BUTTON HEAD FITTINGS
Double Ball Check
THREAD SIZE
ACCEPTS BUTTON
HEAD GREASE
GUN COUPLER
1" NPT
BALL
SPRING
3/4" NPT
7/8" TO 1-5/16" HEX
BALL
1/2" NPT
BALL SUPPORT
SEE THREAD SIZE
SPRING
3/8" NPT
HEAVY-DUTY
RADIAL RIVET
CRIMP
1/4" NPT
3/4" - 10 UNC
5/8" - 11 UNC
MATERIAL
PART NO.
PLATING
HEAT TREATMENT
1215
316 SS
4140
1215
316 SS
4140
1215
316 SS
4140
1215
316 SS
4140
1215
316 SS
4140
1215
1215
GB11N8-10
GB11N8-C0
GB11N8-80
GB11N6-10
GB11N6-C0
GB11N6-80
GB11N4-10
GB11N4-C0
GB11N4-80
GB11N3-10
GB11N3-C0
GB11N3-80
GB11N2-10
GB11N2-C0
GB11N2-80
GB16S6-10
GB17S5-10
Zinc
--Zinc
Zinc
--Zinc
Zinc
--Zinc
Zinc
--Zinc
Zinc
--Zinc
Zinc
Zinc
--Annealed (NACE)
Rc 22 Max (NACE)
--Annealed (NACE)
Rc 22 Max (NACE)
--Annealed (NACE)
Rc 22 Max (NACE)
--Annealed (NACE)
Rc 22 Max (NACE)
--Annealed (NACE)
Rc 22 Max (NACE)
-----
BALL
SPRING
**CA**
302 SS
Inconel
X-750
302 SS
Inconel
X-750
302 SS
Inconel
X-750
302 SS
Inconel
X-750
302 SS
Inconel
X-750
302 SS
302 SS
K-Monel ®
CA
K-Monel ®
CA
K-Monel ®
CA
K-Monel ®
CA
K-Monel ®
CA
CA
Single Ball Check
ACCEPTS BUTTON
HEAD GREASE
GUN COUPLER
THREAD SIZE
1/2" NPT
BALL
BALL SUPPORT
3/8" NPT
7/8" HEX
SPRING
1/4" NPT
SEE THREAD SIZE
1/8" NPT
HEAVY-DUTY
RADIAL RIVET
CRIMP
3/8" - 16 UNC
MATERIAL
PART NO.
1215
316 SS
4140
1215
316 SS
4140
1215
316 SS
4140
1215
316 SS
4140
1215
GB10N4-10
GB10N4-C0
GB10N4-80
GB10N3-10
GB10N3-C0
GB10N3-80
GB10N2-10
GB10N2-C0
GB10N2-80
GB10N1-10
GB10N1-C0
GB10N1-80
GB18S3-10
PLATING
Zinc
--Zinc
Zinc
--Zinc
Zinc
--Zinc
Zinc
--Zinc
Zinc
HEAT TREATMENT
BALL
SPRING
--Annealed (NACE)
Rc 22 Max (NACE)
--Annealed (NACE)
Rc 22 Max (NACE)
--Annealed (NACE)
Rc 22 Max (NACE)
--Annealed (NACE)
Rc 22 Max (NACE)
---
**CA**
302 SS
Inconel
X-750
302 SS
Inconel
X-750
302 SS
Inconel
X-750
302 SS
Inconel
X-750
302 SS
K-Monel ®
CA
K-Monel ®
CA
K-Monel ®
CA
K-Monel ®
CA
for temporary sealing of leaking button head fittings
LEAK LOCK FITTINGS
Standard Style
Nylon Insert / Lock-On Style
LOCKING
SET SCREW
SEALING
GASKET
NYLON SLEEVE
BUTTON
HEAD FITTING
BUTTON
HEAD FITTING
LOCKING ANGLE
APPLICATION
PART NO.
APPLICATION
PART NO.
For Giant Button Heads
For Standard Button Heads
LL1
LL2
For Giant Button Heads
For Standard Button Heads
LL1-NL
LL2-NL
PLEASE CONSULT FACTORY FOR PRODUCT AVAILABILITIES. **CA=AISI 52100 Chrome Alloy ~ Other materials and plating available upon request.
8
PGI International
C O M B I N AT I O N L U B R I C A N T / S T I C K I N J E C T O R S
Double Ball Check
THREAD SIZE
3/4" NPSM
1/2" NPSM
3/8" NPSM
1/4" NPSM
7/8" - 9 UNC
3/4" - 10 UNC
5/8" - 11 UNC
MATERIAL
PART NO.
PLATING
HEAT TREATMENT
BALL
SPRING
OAL
1215
CL11P6-10
Zinc
---
**CA**
4-5/8"
ACCEPTS BUTTON
HEAD GREASE
GUN COUPLER
316 SS
CL11P6-C0
---
Annealed (NACE)
K-Monel ®
4-5/8"
BALL
1215
CL11P4-10
Zinc
---
CA
302 SS
Inconel
X-750
302 SS
Inconel
X-750
302 SS
Inconel
X-750
302 SS
Inconel
X-750
302 SS
302 SS
302 SS
®
316 SS
CL11P4-C0
---
Annealed (NACE)
K-Monel
1215
CL11P3-10
Zinc
---
CA
316 SS
CL11P3-C0
---
Annealed (NACE)
K-Monel ®
1215
CL11P2-10
Zinc
---
CA
316 SS
CL11P2-C0
---
Annealed (NACE)
K-Monel ®
1215
1215
1215
CL16S7-10
CL14S6-10
CL15S5-10
Zinc
Zinc
Zinc
-------
CA
CA
CA
SPRING
3-9/16"
7/8" TO 1-1/8" HEX
3-9/16"
BALL
3-1/4"
SPRING
3-1/4"
SEE THREAD SIZE
2-7/16"
2-7/16"
HEAVY-DUTY
RADIAL RIVET
CRIMP
3-1/8"
3-1/16"
2-7/8"
Single Ball Check
THREAD SIZE
3/4" NPSM
1/2" NPSM
3/8" NPSM
MATERIAL
PART NO.
PLATING
BALL
SPRING
OAL
1215
CL10P6-10
Zinc
---
**CA**
4-3/4"
ACCEPTS BUTTON
HEAD GREASE
GUN COUPLER
316 SS
CL10P6-C0
---
Annealed (NACE)
K-Monel ®
4-3/4"
BALL
1215
CL10P4-10
Zinc
---
CA
302 SS
Inconel
X-750
302 SS
Inconel
X-750
302 SS
Inconel
X-750
302 SS
Inconel
X-750
302 SS
302 SS
302 SS
302 SS
316 SS
CL10P4-C0
---
HEAT TREATMENT
Annealed (NACE)
1215
CL10P3-10
Zinc
---
CA
316 SS
CL10P3-C0
---
Annealed (NACE)
K-Monel ®
1215
CL10P2-10
Zinc
---
CA
316 SS
CL10P2-C0
---
Annealed (NACE)
K-Monel ®
1215
1215
1215
1215
CL21S8-10
CL10S6-10
CL10S4-10
CL17S3-10
Zinc
Zinc
Zinc
Zinc
1/4" NPSM
1" - 10 UNC
3/4" - 10 UNC
1/2" - 13 UNC
3/8" - 16 UNC
K-Monel
®
-
-
CA
CA
CA
CA
-
7/8" HEX
3-5/8"
3-5/8"
3-1/32"
SPRING
3-1/32"
2-3/8"
SEE THREAD SIZE
2-3/8"
4-5/8"
3-9/32"
2-1/8"
1-1/2"
HEAVY-DUTY
RADIAL RIVET
CRIMP
with floating cone to preventL Ogalling
of seat
CK SEAL FITTINGS
Double Ball Check - 2 Piece Metal-to-Metal Seal
with Floating Cone to Prevent Galling of Seat
NOTE: This fitting is available as Free Flow style.
THREAD SIZE
3/4" NPT
1/2" NPT
3/8" NPT
1/4" NPT
MATERIAL
PART NO.
PLATING
HEAT TREATMENT
BALL
SPRING
302 SS
Inconel
X-750
302 SS
Inconel
X-750
302 SS
Inconel
X-750
302 SS
Inconel
X-750
1215
LS10N6-10
Zinc
---
**CA**
316 SS
LS10N6-C0
---
Annealed (NACE)
K-Monel ®
1215
316 SS
4140
1215
316 SS
4140
1215
316 SS
4140
LS10N4-10
LS10N4-C0
LS10N4-80
LS10N3-10
LS10N3-C0
LS10N3-80
LS10N2-10
LS10N2-C0
LS10N2-80
Zinc
--Zinc
Zinc
--Zinc
Zinc
--Zinc
--Annealed (NACE)
Rc 22 Max (NACE)
--Annealed (NACE)
Rc 22 Max (NACE)
--Annealed (NACE)
Rc 22 Max (NACE)
CA
K-Monel ®
CA
K-Monel
®
CA
K-Monel
®
ACCEPTS BUTTON
HEAD GREASE
GUN COUPLER
BALL
BALL SUPPORT
7/8" HEX
SPRING
7/8" TO 1-1/8" HEX
CONE
METAL-TO-METAL SEAL
FLOATING CONE TO
PREVENT GALLING OF
SEAT
BALL
BALL SUPPORT
1/4" TO 3/4" NPT
SPRING
HEAVY-DUTY
RADIAL RIVET CRIMP
PGI International
9
BODY VENT (BLEEDER) FITTINGS
Standard Hex Head Style
THREAD SIZE
STINGER
1-1/2" NPT
3/4" TO 7/8" HEX
1-1/4" NPT
STOP PIN
7/8" TO 2" HEX
1" NPT
VENTING PORT
OAL
3/4" NPT
BALL
1/4" TO 1-1/2" NPT
1/2" NPT
3/8" NPT
1/4" NPT
MATERIAL
PART NO.
HEX SIZE
OAL
PLATING
HEAT TREATMENT
BALL
1215
316 SS
4140
1215
316 SS
4140
1215
316 SS
4140
1215
316 SS
4140
1215
316 SS
4140
1215
316 SS
4140
1215
316 SS
4140
BV10N12-10
BV10N12-C0
BV10N12-80
BV10N10-10
BV10N10-C0
BV10N10-80
BV10N8-10
BV10N8-C0
BV10N8-80
BV10N6-10
BV10N6-C0
BV10N6-80
BV10N4-10
BV10N4-C0
BV10N4-80
BV10N3-10
BV10N3-C0
BV10N3-80
BV10N2-10
BV10N2-C0
BV10N2-80
2"
2-5/8"
2-5/8"
--Annealed (NACE)
Rc 22 Max (NACE)
--Annealed (NACE)
Rc 22 Max (NACE)
--Annealed (NACE)
Rc 22 Max (NACE)
--Annealed (NACE)
Rc 22 Max (NACE)
--Annealed (NACE)
Rc 22 Max (NACE)
--Annealed (NACE)
Rc 22 Max (NACE)
--Annealed (NACE)
Rc 22 Max (NACE)
440 SS
2"
Zinc
--Zinc
Zinc
--Zinc
Zinc
--Zinc
Zinc
--Zinc
Zinc
--Zinc
Zinc
--Zinc
Zinc
--Zinc
1-3/4"
2-5/16"
1-3/4"
2-5/16"
1-5/16"
2-3/16"
1-5/16"
2-3/16"
1-1/8"
1-5/8"
1-1/8"
1-5/8"
7/8"
1-1/2"
7/8"
1-1/2"
7/8"
1-9/16"
7/8"
1-9/16"
7/8"
1-5/8"
7/8"
1-5/8"
**TC**
440 SS
TC
440 SS
TC
440 SS
TC
440 SS
TC
440 SS
TC
440 SS
TC
Hex Socket Head Style
THREAD SIZE
STOP PIN
3/4" NPT
7/8" TO 1-1/8" HEX
STINGER
1/2" NPT
VENTING PORT
BALL
3/8" NPT
1/4" TO 3/4" NPT
1/4" NPT
MATERIAL
PART NO.
HEX SIZE
OAL
PLATING
HEAT TREATMENT
BALL
1215
316 SS
4140
1215
316 SS
4140
1215
316 SS
4140
1215
316 SS
4140
BV10N6-10-T1
BV10N6-C0-T1
BV10N6-80-T1
BV10N4-10-T1
BV10N4-C0-T1
BV10N4-80-T1
BV10N3-10-T1
BV10N3-C0-T1
BV10N3-80-T1
BV10N2-10-T1
BV10N2-C0-T1
BV10N2-80-T1
1-1/8"
1-5/8"
1-5/8"
7/8"
1-1/2"
7/8"
1-1/2"
--Annealed (NACE)
Rc 22 Max (NACE)
--Annealed (NACE)
Rc 22 Max (NACE)
--Annealed (NACE)
Rc 22 Max (NACE)
--Annealed (NACE)
Rc 22 Max (NACE)
440 SS
1-1/8"
Zinc
--Zinc
Zinc
--Zinc
Zinc
--Zinc
Zinc
--Zinc
7/8"
1-9/16"
7/8"
1-9/16"
7/8"
1-5/8"
7/8"
1-5/8"
**TC**
440 SS
TC
440 SS
TC
440 SS
TC
Optional Style of Body Vent (Bleeder) Fittings
MATERIAL
THREAD
SIZE
BODY
STEM
4140
1018
1" NPT
316 SS K-Monel ®
1018
4140
3/4" NPT
316 SS K-Monel ®
PART NO.
BV1-C-10
BV1-C-2
BV34-C-10
BV34-C-2
MATERIAL
PART NO.
BODY STEM
1018
4140 BV12-C-10-Y2
1/2" NPT
316 SS 17- 4 pH BV12-C-2-Y2
THREAD
SIZE
MATERIAL
PART NO.
BODY STEM
12L14 316 SS BV16N4-20
1/2" NPT 1018 316 SS BV16N4-30
316 SS 316 SS BV16N4-C0
THREAD
SIZE
PLEASE CONSULT FACTORY FOR PRODUCT AVAILABILITIES. **TC=Tungsten Carbide ~ Other materials and plating available upon request.
10
PGI International
INTERNAL CHECK FITTINGS
Single Ball Check, Soft Seat, Spring Biased
THREAD SIZE
1/2" NPT
3/8" NPT
1/4" NPT
1/4" NPT
MATERIAL
316 SS
4140
316 SS
4140
316 SS
4140
316 SS
4140
PART NO.
IC10N4-C0
IC10N4-80
IC10N3-C0
IC10N3-80
IC10N2-C0
IC10N2-80
IC11N2-C0
IC11N2-80
PLATING
HEAT TREATMENT
--Zinc
--Zinc
--Zinc
--Zinc
Annealed (NACE)
Rc 22 Max (NACE)
Annealed (NACE)
Rc 22 Max (NACE)
Annealed (NACE)
Rc 22 Max (NACE)
Annealed (NACE)
Rc 22 Max (NACE)
BALL
SPRING
®
K-Monel
K-Monel ®
K-Monel ®
K-Monel ®
K-Monel ®
K-Monel ®
K-Monel ®
K-Monel ®
Inconel
Inconel
Inconel
Inconel
Inconel
Inconel
Inconel
Inconel
OAL
X-750
X-750
X-750
X-750
X-750
X-750
X-750
X-750
1/4" TO
1/2" NPT
15/16"
15/16"
7/8"
7/8"
3/4"
3/4"
21/32"
21/32"
SOFT SEAT
BALL
SPRING
RETAINER
Double Ball Check (Floating)
THREAD SIZE
1/2" NPSM
3/8" NPSM
1/4" NPSM
MATERIAL
PART NO.
PLATING
HEAT TREATMENT
BALL
OAL
1215
316 SS
1215
316 SS
1215
316 SS
IC12P4-10
IC12P4-C0
IC12P3-10
IC12P3-C0
IC12P2-10
IC12P2-C0
Zinc
--Zinc
--Zinc
---
--Annealed (NACE)
--Annealed (NACE)
--Annealed (NACE)
**CA**
K-Monel ®
CA
K-Monel ®
CA
K-Monel ®
1-5/8"
1-5/8"
1-9/32"
1-9/32"
1"
1"
SCREWDRIVER
SLOT
BALL
1/4" TO 1/2" NPSM
BALL
PIN
Single Ball Check (Floating)
THREAD SIZE
MATERIAL
PART NO.
PLATING
HEAT TREATMENT
BALL
OAL
1215
316 SS
4140
1215
316 SS
4140
1215
316 SS
4140
IC13S8-10
IC13S8-C0
IC13S8-80
IC13S7-10
IC13S7-C0
IC13S7-80
IC13S6-10
IC13S6-C0
IC13S6-80
Zinc
--Zinc
Zinc
--Zinc
Zinc
--Zinc
--Annealed (NACE)
Rc 22 Max (NACE)
--Annealed (NACE)
Rc 22 Max (NACE)
--Annealed (NACE)
Rc 22 Max (NACE)
**CA**
1-9/16"
K-Monel ®
1-9/16"
SEE THREAD SIZE
1" - 8 UNC
7/8" - 9 UNC
3/4" - 10 UNC
CA
1-7/16"
K-Monel ®
1-7/16"
CA
1-1/4"
K-Monel ®
1-1/4"
BALL
PIN
PGI International
11
ORIFICE FITTING COMPONENTS
Stuffing Box with Nut
Bearing Plug
Packing (Gland) Retainer
OAL
1-9/16" - 16 UNS
1-9/16" - 16 UNS
MATERIAL
PART NO.
PLATING
MATERIAL
PART NO.
PLATING
DESCRIPTION
PART NO.
MATERIAL
1215
ASB1562
Zinc
1215
BP1562
Zinc
5/8" I.D. x 1/4" OAL
5/8" I.D. x 3/4" OAL
PG625X25-2
PG625X75-2
316 SS
316 SS
Injection Fitting
Equalizer Assembly
1/2" SQUARE
HEAD STINGER
STEM
1" HEX
3/4" HEX
GLAND NUT
1"-14 UNS-2A
COMPRESSION RING
PACKING RING
7/8"-14 UNF-2A
7/32" BALL
BALL
PIN
INJECTION FITTING - “GREASE GUN” 1/4" NPT
MATERIAL
1215
316 SS
4140
PART NO.
PIF14-D
PIF14-D-2
PIF14-D-3
PLATING
Zinc
--Zinc
HEAT TREATMENT
--Annealed (NACE)
Rc 22 Max (NACE)
BALL
**CA**
K-Monel ®
K-Monel ®
SOLD AS AN ASSEMBLY ONLY.
COMPONENTS NOT READILY AVAILABLE FOR INDIVIDUAL SALE.
THREAD SIZE
7/8" - 14 UNF
PART NO.
EQ78-2
EQ78-SP-2
STEM
316 SS
316 SS
COMPRESSION
RING
316 SS
316 SS
PACKING
RING
®
Teflon
Teflon®
GLAND
NUT
BALL
1215
316 SS
440 SS
440 SS
PLEASE CONSULT FACTORY FOR PRODUCT AVAILABILITIES. **CA=AISI 52100 Chrome Alloy ~ Other materials, plating and configurations available upon request.
12
PGI International
WELLHEAD AND TREE COMPONENTS
Other materials, plating and configurations available upon request. Please consult factory for product availabilities.
NOTE: Standard Lockscrews are produced from AISI 4140 material and heat treated
to meet the requirements of ASTM A193 Grade B-7. Plating is Zinc.
A
THREAD
1-1/2"-8 UN
1-1/2"-8 UN
1-1/4"-12 UNF
1-1/4"-12 UNF
1-1/4"-12 UNF
1-1/4"-12 UNF
1-1/4"-12 UNF
1-1/4"-12 UNF
1-1/4"-12 UNF
1-1/4"-12 UNF
1-1/4"-7 UNC
1-1/4"-7 UNC
1-1/4"-7 UNC
1-1/4"-7 UNC
1-1/4"-7 UNC
1-1/4"-8 UN
1-1/4"-8 UN
1-1/4"-8 UN
1-1/4"-8 UN
1-1/4"-8 UN
1-1/8"-8 UN
1-1/8"-8 UN
1-1/8"-8 UN
B
LENGTH
10-1/8"
12"
6-7/8"
7-5/8"
9"
10"
11"
12-1/4"
13-1/2"
7"
7-1/4"
9-1/2"
10-1/2"
7"
9-3/4"
6-3/4"
7-3/8"
8-3/4"
10-1/8"
11-1/2"
7-1/4"
8-3/4"
9-3/4"
C
DIAMETER
1-1/8"
1-1/8"
1"
1"
1"
1"
1"
1"
1"
7/8"
1"
1"
1"
7/8"
7/8"
7/8"
7/8"
7/8"
7/8"
7/8"
13/16"
13/16"
13/16"
D
FLATS
1"
1"
3/4"
3/4"
3/4"
3/4"
3/4"
3/4"
3/4"
11/16"
3/4"
3/4"
3/4"
3/4"
11/16"
11/16"
11/16"
11/16"
11/16"
11/16"
11/16"
11/16"
11/16"
E
LENGTH
7-5/16"
9-5/32"
5-1/2"
6-13/64"
7-9/16"
8-9/16"
9-9/16"
10-15/16"
12-1/8"
5-5/8"
5-3/4"
8-1/16"
8-9/16"
5-1/2"
8-1/4"
5-1/4"
5-7/8"
7-1/4"
8-3/16"
10-1/16"
5-29/32"
7-5/16"
7-3/4"
Lockscrews
PART NO.
STANDARD GLAND
LP19S12-80
LP20S12-80
LP14S10-80
LP15S10-80
LP16S10-80
LP17S10-80
LP18S10-80
LP22S10-80
LP25S10-80
LP23S10-80
LP06S10-80
LP07S10-80
LP08S10-80
LP05S10-80
LP26S10-80
LP09S10-80
LP10S10-80
LP11S10-80
LP12S10-80
LP13S10-80
LP01S9-80
LP02S9-80
LP03S9-80
PG16S14-10
PG16S14-10
PG13S13-10
PG13S13-10
PG13S13-10
PG13S13-10
PG13S13-10
PG13S13-10
PG13S13-10
PG13S13-10
PG15S14-10
PG15S14-10
PG15S14-10
PG12S12-10
PG12S12-10
PG11S12-10
PG11S12-10
PG11S12-10
N/A
PG11S12-10
PG14S12-10
PG14S12-10
PG14S12-10
D
E
C
B
A
45°
.06 R
Packing Glands; Type “A”
NOTE: Standard Glands are produced from 1215 material and Zinc plated.
A
THREAD
1-1/2"-6 UNC
1-1/2"-8 UN
1-1/2"-10 UN
1-3/4"-8 UN
B
BORE
57/64"
57/64"
57/64"
1-5/32"
C
LENGTH
1-1/4"
1-7/8"
1-7/8"
2-3/4"
D
LENGTH
7/8"
1-1/4"
1-1/4"
1-5/16"
E
HEX
1-5/8"
1-5/8"
1-5/8"
2"
PART NO.
PG10S12-10
PG11S12-10
PG12S12-10
PG16S14-10
JUNK RING
REQUIRED
JR11-10
JR12-10 or JR11-10
JR11-10
JR14-10
E
C
D
B
A
Packing Glands; Type “B”
NOTE: Standard Glands are produced from 1215 material and Zinc plated.
A
THREAD
1-5/8"-12 UN
1-1/2"-12 UNF
1-3/4"-12 UN
B
BORE
1-1/32"
53/64"
1-1/64"
C
LENGTH
2-1/8"
2-11/16"
2-11/16"
D
LENGTH
1-3/4"
1-15/16"
1-15/16"
E
HEX
1-3/4"
1-1/2"
1-3/4"
PART NO.
PG13S13-10
PG14S12-10
PG15S14-10
JUNK RING
REQUIRED
JR10-10
JR12-10 or JR20-10
JR10-10
E
C
D
B
A
Junk Rings
NOTE: Standard Junk Rings are produced from 1215 material and Zinc plated.
A
O.D.
1-1/2"
1-1/4"
1-3/8"
1-5/8"
1-3/8"
B
I.D.
1-1/64"
57/64"
57/64"
1-9/64"
53/64"
C
THICKNESS
1/4"
1/4"
1/4"
1/4"
1/4"
PART NO.
C
JR10-10
JR11-10
JR12-10
JR14-10
JR20-10
B
PGI International
A
13
WELLHEAD AND TREE COMPONENTS & PLUGS
Nipples
Bull Plugs
THREAD TYPE AND SIZE
MATERIAL
PART NO.
OAL
I.D.
2" LP Plain
2" LP - 1/2" NPT
2-3/8" - EUE-8RD - 1/2" NPT
2-7/8" - EUE - 8RD - 1/2" NPT
1040/1045
1040/1045
1040/1045
1040/1045
C3-009-40
C3-010-40
C3-012-40
C3-014-40
4"
4"
5"
5-1/2"
1-5/8"
1-5/8"
1-1/2"
1-3/4"
THREAD
SIZE
2" LP
MATERIAL
PART NO.
OAL
TUBE TUBE
O.D. I.D.
6"
8"
2.40" 1-1/2"
2.40" 1-1/2"
A106 Grade B XXH Seamless Pipe C4-002-40
A106 Grade B XXH Seamless Pipe C4-003-40
API MONOGRAMMABLE VERSIONS AVAILABLE
Valve Removal Plugs - Solid
Valve Removal Plugs - Bleeder
NOTE: Bleeder-Valve
Removal Plugs are produced
from 4140 material.
PIPE PLUG
SNAP RING
PLUG RELEASE PIN
1/2" 302 SS BALL
WASHER AND
SNAP RING
THREAD
SIZE
PART NO.
1-1/4" LP
1-1/2" LP
VR13N10-80
VR13N12-80
OAL
HEX
3-1/2" 1-1/4"
3-1/2" 1-1/4"
PLATING
HEAT
TREATMENT
Zinc
Zinc
Rc 22 Max (NACE)
Rc 22 Max (NACE)
THREAD
MATERIAL PART NO.
SIZE
1-1/4" LP
1-1/2" LP
1-1/4" LP
1-1/4" LP
1-1/2" LP
4140
4130
4140
4130
4140
4140
4140
VR10N10-80
VR10N12-70
VR10N12-80
VR11N10-70
VR11N10-80
VR12N10-80
VR12N12-80
PLATING
HEAT
TREATMENT
2-7/8" 1-1/4"
Zinc
Rc 22 Max (NACE)
2-7/8" 1-1/4"
Zinc
Rc 22 Max (NACE)
2-7/8" 1-1/8"
Zinc
Rc 22 Max (NACE)
3-1/2" 1-1/4"
3-1/2" 1-1/4"
Zinc
Zinc
Rc 22 Max (NACE)
Rc 22 Max (NACE)
OAL
HEX
API MONOGRAMMABLE VERSIONS AVAILABLE
Cavity Plugs
THREAD SIZE
1" NPT
3/4" NPT
1/2" NPT
MATERIAL
1215
316 SS
4140
1215
316 SS
4140
1215
316 SS
4140
Packing Injection / Bleeder Plugs
PART NO.
CP1
CP1-2
CP1-3
CP34
CP34-2
CP34-3
CP12
CP12-2
CP12-3
HEAT TREATMENT
PLATING
--Annealed (NACE)
Rc 22 Max (NACE)
--Annealed (NACE)
Rc 22 Max (NACE)
--Annealed (NACE)
Rc 22 Max (NACE)
Zinc
--Zinc
Zinc
--Zinc
Zinc
--Zinc
THREAD SIZE
7/8" - 9 UNC
1/2" - 13 UNC
MATERIAL
PART NO.
HEAT TREATMENT
PLATING
1215
4140
17-4 pH
1215
4140
17-4 pH
PIBP78
PIBP78-3
PIBP78-17
PIBP12
PIBP12-3
PIBP12-17
--Rc 22 Max (NACE)
HH1150 (NACE)
--Rc 22 Max (NACE)
HH1150 (NACE)
Zinc
Zinc
--Zinc
Zinc
---
PLEASE CONSULT FACTORY FOR PRODUCT AVAILABILITIES. Other materials, plating and configurations available upon request.
14
PGI International
CONTRACT MANUFACTURING
PGI International has performed contract manufacturing of
We are experienced in conforming to NACE, API, and ANSI
quality machined components, sub-assemblies and full assem-
specifications, with full traceability if required. We have the
blies for over 60 years to suppliers and manufacturers of
capabilities to machine mild and medium carbon steel, alloy
oilfield equipment, valves, actuators, instrumentation, geo-
steel, stainless alloy, Monel, Inconel, and aluminum. PGI
physical equipment, automotive components, power plant
International’s 185,000 sq. ft. manufacturing facility includes
products, construction equipment, petrochemical equipment
over 200 machines in 5 machining departments and 3 assembly
and heat exchangers. Contract manufacturing has always
departments. We welcome your inquiries.
been, and will continue to be, a very important segment of
our business.
P R O D U C T Q U A L I T Y C E R T I F I C AT I O N S
ISO 9001:2000
API
In 1996 PGI’s Quality Management System achieved ISO
In November of 2005 our quality management system was
9001 certification. As a result of our continued efforts and
audited and successfully met the requirements of the
commitment to quality, we have maintained this universal
American Petroleum Institute (API) specification Q1 and API
quality standard for more than 11 years, and in 2003, were re-
6A, and we have therefore been granted the right to use the
certified to ISO 9001:2000.
Official API Monogram on applicable manufactured products.
In addition, PGI’s Quality
Management System ensures that our products conform to
ASME standards and enables us to receive certifications from
Underwriters Laboratory, Factory Mutual, CSA and D.O.T.,
when applicable.
TERMS AND CONDITIONS OF SALE
All orders are subject to acceptance by PGI International.
Prices are subject to change without notice and are subject to
the addition of any applicable excise or sales taxes levied by
local, state, or federal authorities.
be canceled only when full payment for expenses incurred is
agreed to.
PGI International warrants its products to be free of defects
in material and workmanship at time of shipment and con-
All shipments are FOB PGI International’s facility in
form to seller’s specifications or, if applicable, to buyer’s
Houston, Texas USA. Orders will be accepted subject to
specifications accepted in writing by seller. This warranty
approval of the purchaser’s credit by PGI International. After
is for one (1) year from the date of shipment and is limited
credit approval, payment terms will be Net within 30 days,
to the repair or replacement of any item manufactured by
from shipping date, in U.S. Funds.
PGI International.
Deliveries may be subject to delays caused by conditions
Claims for material quality or workmanship failure are sub-
beyond the control of PGI International and PGI International
ject to inspection and approval by PGI International. PGI
is to be held harmless from damages and incidentals from
International is to be held harmless for any loss in excess of
these instances.
original purchase price of product. Since conditions of actual
Returns of product require prior written approval. Returns
not involving material deficiencies will be subject to a restock-
use are beyond control of seller, the foregoing warranty
extends only to normal use and service.
ing and handling charge at the discretion of PGI International.
No liability will be assumed by PGI International for the
All returns of this nature are to be shipped FOB PGI
infringement of any patent rights asserted because of the
International’s location.
nature, structure, or use of any products ordered by the pur-
Cancellation of orders peculiar to customer’s specific design
or constituting a major investment by PGI International will
chaser, and the purchaser agrees to hold PGI International
harmless to any such claims.
PGI International
15
OTHER PGI PRODUCTS AND SERVICES
Instrument Valves and Manifolds
Power Plant Valves and Manifolds
Direct-Mount™ Manifold Systems
ThermoElectric Battery Chargers
Gas and Liquid Sampling Systems
Heated Enclosure Sampling Systems
Thermowells & Probes
On-Site Pulsation Testing
Propane and Anhydrous Ammonia Valves
Contract Machining
6A-1740
© PGI International 11/07
16101 Vallen Drive
Houston, Texas 77041 USA
Tel: (713) 744-9880
(800) 231-0233
Fax: (713) 744-9881
www.pgiint.com
[email protected]

PGI Valve Fittings

Transcription

Similar documents

Zinc - Kwun Tong Government Secondary School

Minerals - Saskatchewan Mining Association

JAG flocomponents LP

Saturday 22nd September 2012

Ball Up Sports Flyer - Holland Junior School

NACE NEWS… HOUSTON

Throw a ball up and it will fall down 1) The force of gravity pulls the

Micronutrient Compatibility - The Fluid Fertilizer Foundation

E Series Heatless Regenerative Air Dryer

LET US Play - Lines.cdr