1600 series

Transcription

1600 series

1600 Series
Insert Picture
Preferably a CAD drawing
Product Information Guide
INTRODUCTION
MASSEY FERGUSON® 1600 SERIES
INTRODUCTION
Massey Ferguson is proud to introduce the 1600 series compact tractors. This sleek new
series presents six new models.
The new styling of the Massey Ferguson 1600 series shares the Massey Ferguson family
appearance. The contoured one piece flip up hood allows easy access to the engine
compartment for service and maintenance. The deluxe seat with arm rests provides plenty of
comfort to operate all day. The newly designed controls makes the tractor even easier to use.
The versatility of compact tractors have allowed them to become an essential tool for many
applications, from farm work to landscaping. The ability to multi-task allows these tractors to
become a perfect fit for the homeowner or professional. A variety of attachments allow these
tractors to adapt to any task. Loaders and backhoes are available for every model. Front
mounted snow blowers, blades and rotary brooms are also available, as well as countless
three point hitch implements, including tillers, mowers and blades.
110-1
FEATURES AND BENEFITS
ENGINE
The Massey Ferguson 1600 series compact tractors use an Iseki liquid cooled, indirect
injection diesel engine. These Tier IV Interim engines deliver optimum power while maintaining
high efficiency levels and going beyond current emissions standards.
The 1635 utilizes a three cylinder engine, while the 1643, 1648, 1652, 1655 and 1660 use four
cylinder engines. All the 1600 series engines are naturally aspirated.
The engine in the 1635 has a longer stroke then the previous model. The crankshaft has been
induction hardened to increase output power while using the same size pin, reducing friction
and increasing fuel efficiency. The larger water pump allows for more coolant to run through
the cooling system.
The glow plug starting aid is standard equipment for use in cold weather. There is a field
installed engine coolant heater available for extreme cold weather climates.
210-1
TRANSMISSION
The Massey Ferguson 1600 series offers four types of transmissions, the three range hydrostatic, 8x8 SynchroShuttle, 12x12 PowerShuttle and DynaQPS™. With these proven transmissions there will be no problem finding the perfect tractor to meet any customer’s needs.
Hydrostatic
1635
1643
1648
1652
Platform
Cab
Platform
Cab
Platform
Cab
Platform
Cab
Platform
Platform
Platform
Cab
Platform
Platform
Cab
Cab
8x8
SynchroShuttle
12x12
PowerShuttle
DynaQPS™
Platform
Cab
220-1
1655
1660
Platform
Cab
Platform
Cab
Three Range Hydrostatic Transmission
The hydrostatic transmission is offered in the 1635, 1643, 1648, and 1652 platform and cab
models.
In order to change the non-synchronized ranges, the tractor must come to a complete stop,
and using the inline range shift lever, located on the left console choose the correct range.
The side by side pedal forward and reverse pedals make it easy to change directions and give
the operator more room on the platform. The brake pedals have been moved to the left hand
side for convenience.
The hydrostatic transmission is excellent for applications that require frequent direction
changes and speed variations. This transmission is easy to use for any operator.
220-2
Cruise Control
Cruise control is standard on all hydrostatic models. With cruise control the operator can
maintain constant forward speed. To engage cruise control, depress the forward pedal to the
desired speed and pull back the control lever. To slow down, depress the reverse pedal.
Cruise control can be disengaged by depressing the brakes or placing the control lever in the
off position.
5
2
1
4
3
1.
2.
3.
4.
5.
Cruise Control
Range Selector
4wd Engagement
Rear PTO Disconnect
Mid PTO Disconnect
220-3
8 x 8 SynchroShuttle Transmission
Available in the 1643, 1648, and 1655, this transmission provides an economical shuttle shift.
The two non-synchronized ranges and four non-synchronized gears present eight forward
and eight reverse speeds. Range and gear changes are made by fully depressing the clutch,
bringing the tractor to a complete stop and selecting the proper range/gear combination. The
gear and range shift levers are located on the left control console.
To change the direction of travel depress the clutch pedal and move the shuttle lever forward
or backward. The shuttle is located on the left side of the steering column.
This transmission is great for applications where frequent changes in direction are required,
such as loader work.
220-4
12 x 12 PowerShuttle Transmission
Available in the 1635, 1643, 1648, 1652 , 1655 and 1660.
This transmission utilizes three non-synchronized ranges and four synchronized gears, providing twelve forward and twelve reverse speeds with the power shuttle. To shift between the
three ranges the clutch must be fully depressed and the tractor completely stopped. Gear
changes can be made on the go, by simply depressing the clutch pedal and choosing the desired gear. The shift levers are located on the left side control console, the range shift levers
are inline and the gear shift lever is the traditional “H” pattern.
The forward/reverse shuttle lever is located on the left side of the steering column and is controlled by a hydraulic clutch pack, therefore, there is no need to use the foot clutch or stop to
change directions. Just reduce the engine speed and move the shuttle lever to the desired
direction of travel while using the brakes to slow the tractor. Shuttle modulation aids in makes
the transition smooth because it allows the tractor to decrease speed before changing direction.
220-5
DynaQPS™ Transmission
Available only in the 1648, 1652 and 1660 cab models.
The DynaQPS™ integrates the durability of the gear transmission, the convenience of the hydraulic shift and the left hand powershuttle. The three non-synchronized ranges, four gears
and forward/reverse powershuttle provide twelve forward and twelve reverse speeds. To
change ranges the clutch must be completely depressed and the tractor must be stopped, the
range selection lever is located on the left console. The four gears can be selected in each
range using the + and - buttons on the shift lever without the use of the clutch. The powershuttle functions the same as on the 12x12 PowerShuttle transmission, with a hydraulic
clutch pack, so there is no need to use the foot clutch when changing directions. The DynaQPS™ transmission is excellent for loader work and other applications in which it is necessary to change speeds and directions frequently. (Note: under heavy loads the tractor will
hesitate when shifting through gears).
220-6
FRAMES & AXLES
The rugged cast iron frame provides strength and durability for a long lasting machine. All
1600 series tractors come equipped with mechanical 4wd that provides better traction, improving the overall performance of the tractor. The differential lock is standard equipment and
the dual brakes can be unlocked to improve turning radius or locked together to ensure a safe
stop.
230-1
Mechanical 4WD Front Axle
The 4WD front axle is standard equipment.
4WD can be engaged or disengaged using
the lever located on the left control console.
Just push the lever down to engage the 4WD
and pull the lever back up to disengage. The
1660 utilizes an engagement lever similar to
the one in the 1500 series.
Differential Lock
To engage the differential lock, use the foot
pedal located on the right side kick panel (left
side kick panel on HST models). The clutch
must be fully depressed and the tractor completely stopped, then the pedal can be depressed and held until tractor is in motion.
When the rear differential lock is engaged the
rear axles will be locked together causing both
rear tires to turn at the same time, improving
performance in slick conditions. To disengage
the differential lock, depress the clutch pedal
and release the pedal.
Brakes
The wet disc brakes, controlled by dual pedals
provide excellent stopping ability. They can be
unlocked to improve turning radius or locked
together for a quicker stop. They should be
locked together when in transport.
230-2
THREE POINT HITCH/PTO/DRAWBAR
All 1600 series tractors have an ASAE Category I three point hitch that facilitates the use of
many implements. Telescopic lower link ends and telescopic stabilizers make attaching
implements and adjusting the amount of lateral movement easy. Top link draft sensing is
available as a field installed option for applications that require precise three point hitch
control.
All of the 1600 series tractors come equipped with independent power take off (PTO). A
separate hydraulic wet clutch is used to control the engagement of the PTO, making it possible
to engage the PTO independently of the transmission. The independent PTO allows for quick
and easy on the go engagement. The 540 rpm rear PTO is standard equipment. The 2000 rpm
mid PTO is available as a field installed option on the 1635, 1643, 1648 and 1652.
The adjustable drawbar allows the operator adjust the length or remove the drawbar
completely if necessary for certain applications.
240-1
Three Point Hitch Position Control
The position control, located in the right console will raise and lower the three point hitch.
As the control is moved to the rear of the tractor the hitch will raise, when moved toward the
front of the tractor it will lower.
Three Point Hitch Rate of Drop Control
Used to adjust the speed at which the hitch
lowers, the rate of drop control is located on
the kick panel just below the seat. The knob
can be turned all the way to the lock position
to keep the hitch up when transporting implements.
Telescopic Lower Link Ends
The telescopic lower link ends are standard
equipment on all 1600 series tractors. The
ends slide out by simply pushing down on the
lever and pulling out the link end, making it
easy to hook up three point mounted implements. To lock the links ends back in position,
lower the implement to the ground and slowly
back up the tractor until the ends lock in
place.
240-2
Telescopic Stabilizers
The stabilizers allow the operator to adjust the
lateral movement of the lower links. This allows for versatility for different applications,
some jobs may require the need to move,
while more precise work may need the implement to be locked into one position.
Hitch Leveling
The three point hitch can be leveled using the
crank type adjustment at the rear of the tractor.
Top Link Draft Sensing
Top link draft sensing is a field installed option
for all 1600 series tractors. If draft sensing is
installed, the control lever will be located on
the right side console, next to the three point
hitch position control lever.
240-3
Rear PTO
The 540 rpm rear PTO is standard equipment.
The shaft meets ASAE standards with six
splines and 1 3/8” diameter. A hydraulic brake
engages automatically when the PTO is disengaged to bring the PTO shaft to a stop.
Mid PTO
The 2000 rpm mid PTO is available as a field
installed option on the 1635 and 1643, 1648,
1652. The shaft meets ASAE standards with
21 splines and 1” diameter on the 1635 and
the 1 3/8” diameter on the 1643, 1648, and
1652. The mid PTO uses the same brake as
the rear PTO.
240-4
PTO Engagement Switch
The electric PTO switch is located on the right
side of the dash. To turn on the PTO, push
down and turn the switch, to turn it off, simply
push down on it.
PTO Disconnect
The mid and rear PTO disconnect are located
in the left console. These levers will determine
whether the PTO is engaged when the main
control switch is turned on. This makes it possible for the mid and rear PTO to be operated
at the same time or independently from one
another.
PTO Modulation Button
Next to the yellow PTO engagement switch is
the modulation button. When the button is engaged (the light will be on), the PTO will start
slower and more gently for applications that
require a smooth start.
240-5
Drawbar
The drawbar can be adjusted to various
lengths or removed if necessary for different
applications.
240-6
HYDRAULICS
The open center hydraulic system has two pumps, one for three point hitch and auxiliary
hydraulics and the other is a separate pump dedicated to the power steering. The dedicated
steering pump allows the power steering to always perform properly.
All 1600 series tractors have a factory installed joystick with mid-mount couplers, giving the
tractor a smooth and complete look.
Cab models come equipped with one rear remote valve as standard equipment, but all models
can get up to three rear remote valves field installed.
250-1
Factory Installed Joystick
The factory installed joystick is standard
equipment on all 1600 series tractors. The
joystick is conveniently located on the right
hand side in the control console. Float position is provided in the full forward position.
The joystick is raised on the console to prevent unintentional operation.
Joystick Lockout
The factory installed joystick comes equipped
with a joystick lockout to prevent unintentional
operation. When using the joystick, it needs to
be in the unlocked position that is shown in
the picture. To lock the joystick, just pull the
lever up and over.
Mid Mount Valves
The four couplers are mounted directly under
the right front side of the platform. The location allows for the use of short hoses making
loader installation and removal easy, as well
as providing a clean appearance.
250-2
Hydraulic Control Levers
The hydraulic control levers are located on the
right side control console and are tiered for
easy operation.
Auxiliary Remotes
Up to three rear remote valves are available
for all 1600 series tractors. For platform models they are optional field installed, and for
cab models, one valve comes as standard
equipment while an additional two valves can
be field installed.
250-3
ELECTRICAL SYSTEM
The 12 volt electrical system is reliable and easily maintained. Platform models have a 40 AMP
alternator and cab models have a 60 AMP alternator that keep the battery charged and ready
to go. There is plenty of electricity flowing to the lights and controls keeping the operator safe
and comfortable while getting a job done.
The battery is easily accessed by simply raising the hood. The fuse board is also accessible
and easy to navigate.
260-1
Battery
The easily accessed 710A CCA battery is located in the front of the engine compartment
under the one piece tilt hood.
Fuse Box
The electrical fuse box is easily accessed. In
cab models the fuses are located in the cab
post and on the right side of the steering column on platform models.
DC Outlet (Available in cab models only)
Cab models come equipped with a 12 volt
outlet.
260-2
Front Lights
The four front lights are placed high on the
front of the tractor, so there will be minimal
interference with loaders and other front
mounted implements. The outer lights are the
low beams and the inner lights are the high
beams.
Warning Lights (Platform Models)
The warning lights on the platform models are
attached to the ROPS and have a metal guard
to protect the light.
260-3
Lighting (Cab Models)
The cab models have four front headlights and two cab lights for optimal visibility. There are
also two cab lights in the rear, as well as the warning lights with a metal guard.
260-4
OPERATOR ENVIRONMENT
Comfort and ease of operation were given top priority as the 1600 series were developed.
The controls are easy to reach and ergonomically designed decreasing operator fatigue. The
semi-flat platform has a molded rubber floor mat. The tilt steering provides ample space for
entry and exit of the operator station and allows the operator to position the steering wheel to
the most comfortable position while operating. The new seat with arm rests provides fore/aft
and weight adjustments. The retractable seat belt and ASAE certified ROPS are standard
safety equipment on all models.
270-1
1
2
10
3
9
4
8
7
6
5
1 - Foot Throttle
2 - Hand Throttle
3 - Factory Installed Joystick
4 - 3-Point Controls
5 - Hydraulic Controls
6 - PTO Engagement
7 - 4WD Engagement
8 - Range Selector
9 - Gear Selector
10 - F/R Shuttle
270-2
Clutch
The clutch pedal is covered with a rubber pad
with tread to prevent the operator’s foot from
slipping off. There is a metal hook located behind the pedal for storing the tractor in cold
weather conditions for extended periods. The
clutch pedal can be depressed and locked
into place to keep the clutch disc from freezing to the pressure plate and fly wheel.
Brakes
Like the clutch pedal, the two brake pedals
are also covered with a rubber pad to prevent
the operator’s foot from slipping. The operator
can lock the brakes together with metal lever
that is found between the two pedals, to increase stopping ability (the brake pedals
should always be locked together when in
transport). On hydrostatic models, the brake
pedals are located on the left side of the
steering column, so brakes can be used simultaneously with the hydrostatic pedals, improving turning radius.
Tilt Steering
The tilt steering is controlled by the foot lever
located on the left side of the steering column.
The steering wheel can be set to any of three
positions when the lever is pushed in, and will
be locked into place when it is released.
270-3
Seat Adjustment
The spring tension on the seat can be adjusted using the knob that is located just under the seat. The fore/aft adjustment can be
made using the lever located to the left of the
seat.
Three Point Rate of Drop Control
The rate of drop control is located just under
the seat on the kick panel.
Differential Lock
The differential lock is located on the kick
panel on the right hand side.
270-4
Parking Brake
The hook type parking brake is easy to use,
simply depress the brake pedals (must be
locked together) and move the lever on the
right side of the steering column to the down
position and the pedals will be locked into
place. To release the parking brake, just depress the brake pedals.
Light Switches
The light switch is located on the left side of
the dash. The black control is used to turn the
turn signals, and high and low beams for the
headlights on and off. The warning lights are
controlled by the red button to the right of the
light switch.
Folding ROPS
Folding ROPS allow the operator to get in and
out of tight spots where clearance is an issue.
The ROPS are tilted forward slightly to put
them directly over the head of the operator for
better protection. They also have a plate with
a fastener that helps to reduce vibration when
in operation.
270-5
Instrument Panel (Platform)
The instrument panel uses both lights and gauges to provide important operating information
to the operator.
270-6
Cab Features
The factory installed cab offers comfort as well as functionality. With plenty of room, a comfortable seat, excellent visibility and controls at your fingertips, the operator won’t want to get
out of the tractor when the day’s work is done. The fully featured cab has heating and air conditioning, a digital instrument panel, speakers wired for radio and left and right side doors.
270-7
Deluxe Instrument Panel
(Only with DyanQPS™)
The digital display panel will show valuable
information such as gear selection, ground
speed, and fuel levels. The warning lights are
located around the edges of the digital display.
Cab Lights
The light switches for the front and rear work
lights on the cab are located on the right side
of the dash.
Front and Rear Windshield Wipers
Front and rear windshield wipers are standard
equipment. The switches for the windshield
wipers are located on the left side of the dash.
270-8
HVAC
HVAC controls are located within easy reach
of the operator in the upper right side. There
are eight vents, four in the front of the cab and
four in the back.
Cab Recirculation Filter
The cab recirculation filter allows the operator
to choose the air flow from the outside or inside. The filter is located in the rear of the cab
and is perfect to use for applications in which
there is a lot of dust or pollen.
Speakers
There are two speakers in the corners of the
cab that are wired for radio. Radios are available through parts.
270-9
SERVICEABILITY
We have found that maintenance is more likely to get done the easier it is to get to the service
points. The routine maintenance service points are easy to access with the one piece EZlift
steel hood. With assistance from the gas strut, raising the hood is smooth and simple. The
basic servicing points such as, the oil dipstick, can be reached without even lifting the hood.
When the hood is raised, the battery, air cleaner and radiator are all right there within reach.
280-1
Fueling
The fuel tank is located under the hood in
front of the steering column. The flip up door
on top of the hood makes the fuel fill accessible without having to lift the hood, as well is
protecting the fill from debris. The area surrounding the fill is designed to catch the any
overflow of fuel and drain it away from the engine if the tank is overfilled.
Fuel Filter
The fuel filter and shutoff are located on the
right side of the engine and can be accessed
without having to lift the hood. The fuel shut
off valve located on the filter housing makes it
possible to change the filter without draining
the fuel tank.
Oil
The oil dipstick and fill can both be accessed
without raising the hood. The convenience of
the dipstick encourages routine maintenance
checks.
280-2
Air Cleaner
The dual stage air intake system consists of
primary and secondary pleated paper type filters that are located under the hood in front of
the radiator, providing clean and plentiful air
flow to the engine.
Radiator
When the hood is raised, there is access to
all the cooling components, fluid can be
checked and added easily. The removable
radiator screen filters debris before the air
flows through the radiator to allow top performance.
Battery
The battery is in the front of the engine compartment and is accessed easily for removal
or service.
280-3
Hydraulic Site Glass
The hydraulic oil can be checked by looking at
the site glass located on the final drive housing.
Hydraulic Oil Fill
The easily accessed hydraulic oil fill is located
on the rockshaft housing, with the pipe extension, it is simple to add hydraulic oil.
Windshield Washer Fluid Tank
Cab model tractor are equipped with windshield washer fluid tank is located under the
floor mat on the left side of the cab at the entry area. The mat is equipped with snaps to
hold it into place and for quick access to the
fill.
280-4
TIRES
R1 (Ag) Tires
R1 tires are best suited for applications in
which traction is the main concern.
R4 (Industrial) Tires
A versatile tire, cause little ground disturbance
but maintain the strength and durability for
heavy applications.
R3 (Turf) Tires
Turf tires cause very little ground disturbance
and are great for lawn and grounds care work.
LSW (Turf) Tires
LSW (Low Side Wall) tires are designed specifically for turf applications, they cause little
ground disturbance and more floatation then a
standard turf tire.
285-1
SPECIFICATIONS
MASSEY FERGUSON® 1635
GENERAL
Massey Ferguson®
1635
Compact
Make
Model
Class
PERFORMANCE
Engine
Gross Engine Horsepower: hp (kW)
Net Engine Horsepower: hp (kW)
Rated Engine rpm
Fuel Consumption @ rated RPM: g/hr
Torque @ Rated rpm N-m
PTO*
PTO hp @ RPM: hp (kW)
HST
PS
35.7 (26.6)
34.7 (25.9)
2600
2.21
97.7
25.8 (19.2)
27.1 (20.2)
* Manufacturers Estimate
ENGINE GENERAL
Manufacturer
Model
Type
Cylinder Block
Cylinder Head Design
Number of Cylinders
Pistons
Crankshaft
Bore: in (mm)
Stroke: in (mm)
Displacement: in³ (liter)
Compression Ratio
Aspiration
Starting Aid
Engine Coolant Heater
Iseki
E3CG
Indirect Injection Diesel
Cast Iron
Overhead Valve
3
Aluminum
Ductile Iron
3.4 (87)
3.6 (92.4)
100.5 (1.6)
21.8
Natural
Glow Plug
Field Installed Option
310-1
SPECIFICATIONS
ENGINE SYSTEMS
Cooling System
Type
Temperature Control
Fan
Drive
Water Pump
Type
Drive
Air Intake System
Intake Location
Air Cleaner
Type
Number of Elements
Material
Restriction Indicator
Exhaust System
Type
Muffler Location
Spark Arrestor
Fuel System
Type of Injection
Injection Pump
Type
Drive
Governor
Type
Governed Speed Range (rpm)
Lubrication System
Type
Filter Type
Number of Filters
Pressurized Liquid
Single Thermostat
Crankshaft through v-belt
Centrifugal
Common with fan drive
Under Hood
Dry
2
Pleated Paper
NA
Horizontal
Under hood
NA
Indirect
Inline
Engine Timing Gears
Mechanical
980-2910
Pressure Lube
Spin on
1
310-2
SPECIFICATIONS
Power Train
Clutch
Engine Clutch Type
Control & Actuation
Disc Diameter in (mm)
Transmission
Type
Speeds
Pedals
Type
Location
Ranges
Range Shift Lever Location
Cruise Control
Transmission
Type
Speeds
Gears
Gear Shift Lever Location
Ranges
Shuttle Type
Shuttle Shift Lever Location
Transmission Clutch Type
Dry Single Disc
Mechanical
9.4 (238.8)
Hydrostatic
Infinite
Side by Side
Right Floor
3
LH Console
LH Console
12x12 PowerShuttle
12F - 12R
4
LH Console
3
LH Console
PowerShuttle
LH Dash
Wet Multi-disc
Rear Differential and Final Drive
Differential
Type
Housing Construction Material
Differential Lock
Type
Engagement
Final Drive
Type
Brakes
Rear
Actuation
Parking Brake
Ring Gear & Pinion
Cast Iron
Pedal
Mechanical
Outboard Spur Gear
Wet Multi Disc
Mechanical Linkage
Hook Type
310-3
SPECIFICATIONS
FRAMES AND AXLES
Rear Axle
Type
Tread Settings: Min - Max in (mm)
Rear Axle Capacity lbs (kg)
4WD Front Axle
Steering Angle degrees
Drive
Drive Shaft Shield
Drive Ratio
Method of Engagement
Tread Settings in (mm)
Front Axle Capacity lbs (kg)
Flange
49.8 (1265) - 57.7 (1465)
3968 (1800)
56
Mechanical
Yes
1.61
Mechanical Lever
45.7 (1160)
3968 (1800)
THREE POINT HITCH / PTO / DRAWBAR
Three Point Hitch
ASAE Hitch Category
1
Number of Lift Cylinders
1
Controls
RH Console
Type of Stabilizers
Telescopic
Type of Link Ends
Telescopic
Draft Sensing
Optional
Lift Capacity @ 24 in: lb (kg)
2535 (1150)
Lift Capacity @ hitch point: in lb (kg)
2800 (1270)
Rear Power Take Off (PTO)
Type
Independent
Speeds (rpm)
540
Control
Electro Hydraulic Switch
Disconnect Control
LH Console
Clutch
Wet Multi Disc
Shaft Configuration in (mm)
1.37 (35)
PTO Brake
Yes
Mid PTO (optional, field installed)
Type
Independent
Speeds (rpm)
2000
Control
Common w/ Rear PTO
Disconnect Control
LH Console
Clutch
Common w/ Rear PTO
Shaft Configuration in (mm)
0.98 (25)
PTO Brake
Common w/ Rear PTO
NOTE:
Mid & Rear PTO can be operated simultaneously or independently
Drawbar
Type
Fixed
Maximum Static Load lbs (kg)
880 (400)
310-4
SPECIFICATIONS
HYDRAULICS
Total System
Flow: gpm (Lpm)
HST
PS
Number of Pumps
Type of System
Steering
Type
Pump Type
Pump Drive
Flow: gpm (Lpm)
HST
PS
Filters
Number
Type
Remote Auxiliary Hydraulic Valves
Max Flow @ Remotes gpm (Lpm)
Pressure psi (bar)
Number Available
Cab
Platform
Location
Joystick
Factory Installed Joystick Valve
Lockout
Couplers: number/location
16.5 (62.3)
17.6 (66.5)
2
Open Center
Hydrostatic
Gear
Engine Timing Gears
4.9 (18.5)
6.0 (22.7)
1
Full Flow Pressurized
11.6 (43.8)
2276 (157)
1 Standard + 2 Optional
3 Optional
Rear
Standard
Yes
4/mid mount
ELECTRICAL SYSTEM
Starting and Charging
Alternator
Platform
Cab
Battery
Battery Description
Capacity (V. Ah)
CCA
40A
60A
80D26R
12V55A
630
310-5
SPECIFICATIONS
Lighting (Platform)
Front
Hazard Flashers
Turn Signals
Lighting (Cab)
Front
Rear
Hazard Flashers
Turn Signals
2 low beam/2 high beam
2
2
2 roof mounted
2
2
OPERATOR AREA
Type and Controls
Floor Mat Type
Pedals
Steering Wheel
Roll Over Protective Structure (ROPS)
ROPS Approval Number
Seat
Seat Belt Type
Hood Type
SMV Emblem
Beverage Holder
DC Outlet
Cab Features
Number of Doors
Glass Area ft² (m²)
Sound Level in Cab dBA (rated rpm)
Number of Vents
Mirrors
Sun Visor
Front Wiper
Rear Wiper
Interior Light
Radio Wiring & Speakers
Instrument Panel
Rubber
Suspended
3 Position Tilt
Folding
ASAE J2194
Deluxe
Retractable
1 Piece Flip up
Yes
Standard
Standard for cab models
2
49.5 (4.6)
79.5
8
2
NA
Standard
Standard
Standard
Standard
Deluxe Digital
310-6
SPECIFICATIONS
Instrumentation
Fuel Gauge
Tachometer/Hour Meter
Coolant Temperature Gauge
Battery Charge Light
High Beam Indicator
Engine Oil Pressure Light
PTO Engagement Light
Glow Plug Indicator
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
CAPACITIES
Engine
Crankcase w/ Filter: qt (L)
Fuel Tank: gal (L)
Platform
Cab
Cooling System: qt (L)
Power Train
Transmissions and Final Drives: gal (L)
Power Steering System
4WD Differential: qt (L)
5.6 (5.3)
10.5 (40)
9.2 (35)
6.6 (6.2)
8.2 (31)
Common w/ transmission
7.9 (7.5)
310-7
SPECIFICATIONS
DIMENSIONS AND WEIGHTS
With R1 Tires
Dimensions
Wheel Base in (mm)
Overall Length in (mm)
Overall Height in (mm)
Top of ROPS
Top of Cab
Overall Width
Ground Clearance
Front Tires
Rim Type
Tread Width: in (mm)
Rear Tires
Rim Type
Min. Tread Width: in (mm)
Max. Tread Width: in (mm)
Turning Radius w/ Brakes: ft (m)
69.7 (1770)
122 (3100)
100 (2540)
86.6 (2200)
64.5 (1640)
14.2 (360)
Fixed
45.7 (1160)
Adjustable
49.8 (1265)
57.7 (1465)
8.2 (2.5)
Weights
Approximate Shipping Weight lb (kg)
Platform (Hydrostatic)
Platform (Gear)
Cab (Hydrostatic)
Cab (Gear)
3175 (1440)
3153 (1430)
3527 (1600)
3505 (1590)
310-8
SPECIFICATIONS
GENERAL
Massey Ferguson®
1643
Compact
Make
Model
Class
PERFORMANCE
Engine
Rated Engine rpm
Torque @ rated Engine rpm N-m
PTO*
HST
SS/PS
43.5 (32.4)
41.4 (30.9)
2500
2.53
123.8
33.1 (24.7)
34.3 (25.6)
ENGINE GENERAL
Manufacturer
Model
Type
Cylinder Block
Number of Cylinders
Pistons
Crankshaft
Bore: in (mm)
Stroke: in (mm)
Compression Ratio
Aspiration
Starting Aid
Iseki
E4CG
Cast Iron
Overhead Valve
4
Aluminum
Ductile Iron
3.43 (87.0)
3.64 (92.4)
134.1 (2.1)
21.8
Natural
Glow Plug
310-1
SPECIFICATIONS
ENGINE SYSTEMS
Cooling System
Type
Temperature Control
Fan
Drive
Water Pump
Type
Drive
Air Intake System
Intake Location
Air Cleaner
Type
Number of Elements
Material
Exhaust System
Type
Muffler Location
Spark Arrestor
Fuel System
Type of Injection
Injection Pump
Type
Drive
Governor
Type
Governed Speed Range rpm
Lubrication System
Type
Filter
Number of Filters
Pressurized Liquid
Single Thermostat
Centrifugal
common with fan drive
under hood
dry
2
pleated paper
NA
Horizontal
Under Hood
NA
indirect
inline
engine timing gears
mechanical
1010-2800
Pressure Lube
Spin on
1
310-2
SPECIFICATIONS
Power Train
Clutch
Engine Clutch Type
Control & Actuation
Transmission
Type
Speeds
Pedals
Type
Location
Ranges
Cruise Control
Transmission
Type
Speeds
Gears
Ranges
Shuttle Type
Transmission
Type
Speeds
Gears
Ranges
Shuttle Type
Differential
Type
Differential Lock
Type
Engagement
Final Drive
Type
Brakes
Rear
Actuation
Parking Brake
Dry Single Disc
Mechanical
10.8 (275)
Hydrostatic
Infinite
Side by Side
Right Floor
3
LH Console
LH Console
12x12 PowerShuttle
12F - 12R
4
LH Console
3
LH Console
PowerShuttle
LH Dash
Wet Multi-disc
8x8 SynchroShuttle
8F - 8R
4
LH Console
2
LH Console
SynchroShuttle
LH Dash
Ring Gear & Pinion
Cast Iron
Pedal
Mechanical
Outboard Spur Gear
Wet Multi Disc
Mechanical Linkage
Hook Type
310-3
SPECIFICATIONS
FRAMES AND AXLES
Rear Axle
Type
4WD Front Axle
Drive
Drive Shaft Shield
Drive Ratio
Tread Setting in (mm)
Flange
49.8 (1265) - 57.7 (1465)
3968 (1800)
56
Mechanical
Yes
1.61
Mechanical Lever
45.7 (1160)
3968 (1800)
Three Point Hitch
ASAE Hitch Category
1
1
Controls
RH Console
Type of Stabilizers
Telescopic
Type of Link Ends
Telescopic
Draft Sensing
Optional
2535 (1150)
2800 (1270)
Type
Independent
Speeds (rpm)
540
Control
Disconnect Control
LH Console
Clutch
Wet Multi-disc
Shaft Configuration
1.37 (35)
PTO Brake
Yes
Mid PTO (Optional, field installed)
Type
Independent
Speeds (rpm)
2000
Control
Common w/ Rear PTO
Disconnect Control
LH Console
Clutch
Common w/ Rear PTO
Shaft Configuration
1.37 (35)
PTO Brake
Common w/ Rear PTO
NOTE:
Drawbar
Type
Fixed
880 (400)
310-4
SPECIFICATIONS
HYDRAULICS
Total System
Flow: gpm (Lpm)
SS/HST
PS
Number of Pumps
Type of System
Steering
Type
Pump Type
Pump Drive
Flow: gpm (Lpm)
SS/HST
PS
Filters
Number
Type
Pressure psi (bar)
Number Available
Cab
Platform
Location
Joystick
Lockout
16.5 (62.5)
17.3 (65.5)
2
Open Center
Hydrostatic
Gear
Engine Timing Gears
4.9 (18.5)
5.7 (21.4)
1
11.6 (43.8)
276 (157)
3 Optional
Rear
Standard
Yes
4/mid mount
ELECTRICAL SYSTEM
Alternator
Platform
Cab
Battery
Battery Description
Capacity (V.Ah)
CCA
40A
60A
115D31R
12V72A
710A
310-5
SPECIFICATIONS
Lighting (Platform)
Front
Hazard Flashers
Turn Signals
Lighting (Cab)
Front
Rear
Hazard Flashers
Turn Signals
2
2
2 roof mounted
2
2
OPERATOR AREA
Type and Controls
Floor Mat Type
Pedals
Steering Wheel
Seat
Seat Belt Type
Hood Type
SMV Emblem
Beverage Holder
DC Outlet
Cab Features
Number of Doors
Hydro
Gear
Number of Vents
Mirrors
Sun Visor
Front Wiper
Rear Wiper
Interior Light
Instrument Panel
Rubber
Suspended
3 Position Tilt
Folding
ASAE J2194
Deluxe
Retractable
1 Piece Flip up
yes
Standard
Standard
2
49.5 (4.6)
80.5
79.5
8
2
NA
Standard
Standard
Standard
Standard
Deluxe Digital
310-6
SPECIFICATIONS
Instrumentation
Fuel Gauge
High Beam Indicator
Glow Plug Indicator
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
CAPACITIES
Engine
Fuel Tank: gal (L)
Platform
Cab
Power Train
8.5 (8.0)
13.2 (50)
13.2 (50)
8.0 (7.6)
8.2 (31)
7.9 (7.5)
310-7
SPECIFICATIONS
With R1 Tires
Dimensions
Wheel Base in (mm)
Overall Height
Top of ROPS (with ROPS up)
Top of Cab
Overall Width
Ground Clearance
Front Tires
Rim Type
Rear Tires
Rim Type
70.9 (1800)
122 (3100)
103.3 (2625)
94.5 (2400)
64.5 (1640)
14.2 (360)
Fixed
45.7 (1160)
Adjustable
49.8 (1265)
57.7 (1465)
8.2 (2.5)
Weights
Platform (SynchroShuttle)
Platform (PowerShuttle)
Cab (Hydrostatic)
Cab (PowerShuttle)
3384 (1535)
3351 (1520)
3362 (1525)
3737 (1695)
3715 (1685)
310-8
SPECIFICATIONS
GENERAL
Massey Ferguson®
1648
Compact
Make
Model
Class
PERFORMANCE
Engine
Rated Engine rpm
PTO*
HST/DynaQPS
PS/SS
47.1 (35.1)
45.3 (33.8)
2600
2.98
128.9
36.5 (27.2)
38.0 (28.3)
ENGINE GENERAL
Manufacturer
Model
Type
Cylinder Block
Number of Cylinders
Pistons
Crankshaft
Bore: in (mm)
Stroke: in (mm)
Compression Ratio
Aspiration
Starting Aid
Iseki
E4CG
Cast Iron
Overhead Valve
4
Aluminum
Ductile Iron
3.4 (87)
3.6 (92.4)
134.1 (2.1)
21.8
Natural
Glow Plug
310-1
SPECIFICATIONS
ENGINE SYSTEMS
Cooling System
Type
Temperature Control
Fan
Drive
Water Pump
Type
Drive
Air Intake System
Intake Location
Air Cleaner
Type
Number of Elements
Material
Exhaust System
Type
Muffler Location
Spark Arrestor
Fuel System
Type of Injection
Injection Pump
Type
Drive
Governor
Type
Lubrication System
Type
Filter
Number of Filters
Pressurized Liquid
Single Thermostat
Crankshaft through V-belt
Centrifugal
Common w/ Fan drive
Under Hood
Dry
2
Pleated Paper
NA
Horizontal
Under Hood
NA
Indirect
Inline
Engine Timing Gear
Mechanical
1010-2910
Pressure Lube
Spin on
1
310-2
SPECIFICATIONS
Power Train
Clutch
Engine Clutch Type
Control & Actuation
Transmission
Type
Speeds
Pedals
Type
Location
Ranges
Cruise Control
Transmission
Type
Speeds
Gears
Ranges
Shuttle Type
Transmission
Type
Speeds
Gears
Ranges
Shuttle Type
Transmission
Type
Speeds
Gears
Ranges
Shuttle Type
Dry Single Disc
Mechanical
10.8 (275)
Hydrostatic
Infinite
Side by Side
Right Floor
3
LH Console
LH Console
12x12 PowerShuttle
12F - 12R
4
LH Console
3
LH Console
PowerShuttle
LH Dash
Wet Multi-disc
8x8 SynchroShuttle
8F - 8R
4
LH Console
2
LH Console
SynchroShuttle
LH Dash
DynaQPS™
12F - 12R
4
LH Console
3
LH Console
PowerShuttle
LH Dash
Wet Multi-disc
310-3
SPECIFICATIONS
Differential
Type
Differential Lock
Type
Engagement
Final Drive
Type
Brakes
Rear
Actuation
Parking Brake
Ring Gear & Pinion
Cast Iron
Pedal
Mechanical
Outboard Spur Gear
Wet Multi Disc
Mechanical Linkage
Hook Type
FRAMES AND AXLES
Rear Axle
Type
4WD Front Axle
Drive
Drive Shaft Shield
Drive Ratio
Flange
52.4 (1300) - 60.2 (1530)
4630 (2100)
57
Mechanical
Yes
1.62
Mechanical Lever
54.5 (1385)
4630 (2100)
Three Point Hitch
ASAE Hitch Category
Controls
Type of Stabilizers
Type of Link Ends
Draft Sensing
Type
Speeds (rpm)
Control
Disconnect Control
Clutch
Clutch Disc Diameter in (mm)
Shaft Configuration
PTO Brake
1
1
RH Console
Telescopic
Telescopic
Optional
3086 (1400)
3483 (1580)
Independent
540
LH Console
1.37 (35)
310-4
SPECIFICATIONS
Mid PTO (Optional)
Type
Independent
Speeds (rpm)
2000
Control
Instrument Panel
Disconnect Control
LH Console
Clutch
Wet Multi Disc
Shaft Configuration
1.37 (35)
PTO Brake
Yes
NOTE:
Drawbar
Type
Fixed
880 (400)
HYDRAULICS
Total System
Flow: gpm (Lpm)
HST/SS
PS
Number of Pumps
Type of System
Steering
Type
Pump Type
Pump Drive
Flow: gpm (Lpm)
HST/SS
PS
Filters
Number
Type
Pressure psi (bar)
Number Available
Cab
Platform
Location
Joystick
Lockout
16.5 (62.5)
17.6 (66.6)
2
Open Center
Hydrostatic
Gear
Engine Timing Gears
4.9 (18.5)
6.0 (22.7)
1
11.6 (43.8)
2276 (157)
3 Optional
Rear
Standard
Yes
4/mid mount
310-5
SPECIFICATIONS
ELECTRICAL SYSTEM
Type of System
Alternator
Platform
Cab
Battery
Battery Description
Capacity (V.Ah)
CCA
Lighting (Platform)
Front
Hazard Flashers
Turn Signals
Lighting (Cab)
Front
Rear
Hazard Flashers
Turn Signals
40A
60A
15D31R
12V72A
710A
2
2
2 roof mounted
2
2
OPERATOR AREA
Type and Controls
Floor Mat Type
Pedals
Steering Wheel
Seat
Seat Belt Type
Hood Type
SMV Emblem
Beverage Holder
Rubber
Suspended
3 Position Tilt
Folding
ASAE J2194
Deluxe
Retractable
1 Piece Flip up
Yes
Standard
310-6
SPECIFICATIONS
Cab Features
Number of Doors
HST
Gear
Number of Vents
Mirrors
Sun Visor
Front Wiper
Rear Wiper
Interior Light
Instrument Panel
DC Outlet
Instrumentation
Fuel Gauge
High Beam Indicator
Glow Plug Indicator
2
49.5 (4.6)
80
79.5
8
2
NA
Standard
Standard
Standard
Standard
Deluxe Digital
Standard
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
CAPACITIES
Engine
Fuel Tank: gal (L)
Platform
Cab
Power Train
8.5 (8.0)
13.2 (50)
13.2 (50)
8.0 (7.6)
10 (38)
6.9 (6.5)
310-7
SPECIFICATIONS
With R1 Tires
Dimensions
Wheel Base in (mm)
Overall Height
Top of Cab
Overall Width
Ground Clearance
Front Tires
Rim Type
Rear Tires
Rim Type
74.8 (1900)
132.7 (3370)
103.1 (2620)
90.2 (2290)
67.3 (1710)
14.8 (375)
Fixed
54.5 (1385)
Adjustable
52.4 (1330)
60.2 (1530)
9.2 (2.8)
Weights
Cab (Hydrostatic)
Cab (DynaQPS™)
3715 (1685)
3682 (1670)
3693 (1675)
4068 (1845)
4068 (1845)
310-8
SPECIFICATIONS
GENERAL
Massey Ferguson®
1652
Compact
Make
Model
Class
PERFORMANCE
Engine
Rated Engine rpm
PTO*
HST/DynaQPS
PS
52.2 (38.9)
49.4 (36.8)
2500
3.16
148.6
39.4 (29.4)
41.0 (30.6)
ENGINE GENERAL
Manufacturer
Model
Type
Cylinder Block
Number of Cylinders
Pistons
Crankshaft
Bore: in (mm)
Stroke: in (mm)
Compression Ratio
Aspiration
Starting Aid
Iseki
E4DE
Cast Iron
Overhead Valve
4
Aluminum
Ductile Iron
3.8 (97)
3.9 (100)
180.4 (2.9)
21.5
Natural
Glow Plug
310-1
SPECIFICATIONS
ENGINE SYSTEMS
Cooling System
Type
Temperature Control
Fan
Drive
Water Pump
Drive
Air Intake System
Intake Location
Air Cleaner
Type
Number of Elements
Material
Exhaust System
Type
Muffler Location
Spark Arrestor
Fuel System
Type of Injection
Injection Pump
Type
Drive
Governor
Type
Lubrication System
Type
Filter
Number of Filters
Pressurized Liquid
Single Thermostat
Crankshaft through V-belt
Under Hood
Dry
2
Pleated Paper
NA
Horizontal
Under Hood
NA
Indirect
Inline
Engine Timing Gears
Mechanical
975-2750
Pressure Lube
Spin on
1
Power Train
Clutch
Engine Clutch Type
Control & Actuation
Transmission
Type
Speeds
Pedals
Type
Location
Ranges
Cruise Control
Dry Single Disc
Mechanical
10.8 (275)
Hydrostatic
Infinite
Side by Side
Right Floor
3
LH Console
LH Console
310-2
SPECIFICATIONS
Transmission
Type
Speeds
Gears
Ranges
Shuttle Type
Transmission
Type
Speeds
Gears
Ranges
Shuttle Type
Differential
Type
Differential Lock
Type
Engagement
Final Drive
Type
Brakes
Rear
Actuation
Parking Brake
12x12 PowerShuttle
12F - 12R
4
LH Console
3
LH Console
PowerShuttle
LH Dash
Wet Multi-disc
DynaQPS™
12F - 12R
4
LH Console
3
LH Console
PowerShuttle
LH Dash
Wet Multi-disc
Ring Gear & Pinion
Cast Iron
Pedal
Mechanical
Outboard Spur Gear
Wet Multi Disc
Mechanical
Hook Type
FRAMES AND AXLES
Rear Axle
Type
Rear Axle Capacity
4WD Front Axle
Drive
Drive Shaft Shield
Drive Ratio
Flange
52.4 (1330) - 60.2 (1530)
4630 (2100)
57
Mechanical
Yes
1.62
Mechanical Lever
54.5 (1385)
4630 (2100)
310-3
SPECIFICATIONS
Three Point Hitch
ASAE Hitch Category
1
1
Controls
RH Console
Type of Stabilizers
Telescopic
Type of Link Ends
Telescopic
Draft Sensing
Optional
3086 (1400)
3483 (1580)
Type
Independent
Speeds (rpm)
540
Control
Disconnect Control
LH Console
Clutch
Wet Multi Disc
Shaft Configuration
1.37 (35)
PTO Brake
Yes
Mid PTO (optional, field installed)
Type
Independent
Speeds (rpm)
2000
Control
Common w/ Rear PTO
Disconnect Control
LH Console
Clutch
Common w/ Rear PTO
Shaft Configuration
1.37 (35)
PTO Brake
Common w/ Rear PTO
NOTE:
Drawbar
Type
Fixed
880 (400)
HYDRAULICS
Total System
Flow: gpm (Lpm)
HST/SS
PS
Number of Pumps
Type of System
Steering
Type
Pump Type
Pump Drive
Flow: gpm (Lpm)
HST/SS
PS
17.8 (67.6)
18.7 (70.8)
2
Open Center
Hydrostatic
Gear
Engine Timing Gears
5.3 (20.1)
6.4 (24.2)
310-4
SPECIFICATIONS
Filters
Number
Type
Pressure psi (bar)
Number Available
Cab
Platform
Location
Joystick
Lockout
1
12.3 (46.7)
2276 (157)
3 Optional
Rear
Standard
Yes
4/mid mount
ELECTRICAL SYSTEM
Alternator
Platform
Cab
Battery
Battery Description
Capacity (V.Ah)
CCA
Lighting (Platform)
Front
Hazard Flashers
Turn Signals
Lighting (Cab)
Front
Rear
Hazard Flashers
Turn Signals
40A
60A
115D31R
12V72A
710A
2
2
2 roof mounted
2
2
OPERATOR AREA
Type and Controls
Floor Mat Type
Pedals
Steering Wheel
Seat
Seat Belt Type
Hood Type
SMV Emblem
Beverage Holder
Rubber
Suspended
3 Position Tilt
Folding
ASAE J2194
Deluxe
Retractable
1 Piece Flip up
Yes
Standard
310-5
SPECIFICATIONS
Cab Features
Number of Doors
Hydro
Gear
Number of Vents
Mirrors
Sun Visor
Front Wiper
Rear Wiper
Interior Light
Instrument Panel
DC Outlet
Instrumentation
Fuel Gauge
High Beam Indicator
Glow Plug Indicator
2
49.5 (4.6)
81.5
80
8
2
NA
Standard
Standard
Standard
Standard
Digital Deluxe
Standard
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
CAPACITIES
Engine
Fuel Tank: gal (L)
Platform
Cab
Power Train
8.5 (8.0)
13.2 (50)
13.2 (50)
8.0 (7.6)
10 (38)
6.9 (6.5)
310-6
SPECIFICATIONS
With R1 Tires
Dimensions
Wheel Base in (mm)
Overall Height
Top of Cab
Overall Width
Ground Clearance
Front Tires
Rim Type
Rear Tires
Rim Type
76 (1930)
132.7 (3370)
103.1 (2620)
90.2 (2290)
67.3 (1710)
14.8 (375)
Fixed
54.5 (1385)
Adjustable
52.4 (1330)
60.2 (1530)
9.5 (2.9)
Weights
Cab (DynaQPS™)
Cab (Hydrostatic)
3759 (1705)
3781 (1715)
4134 (1875)
4134 (1875)
310-7
SPECIFICATIONS
GENERAL
Massey Ferguson®
1655
Compact
Make
Model
Class
PERFORMANCE
Engine
Rated Engine rpm
PTO*
55.4 (41.3)
52.3 (39.0)
2500
3.3
159.7
43 (32.1)
ENGINE GENERAL
Manufacturer
Model
Type
Cylinder Block
Number of Cylinders
Pistons
Crankshaft
Bore: in (mm)
Stroke: in (mm)
Compression Ratio
Aspiration
Starting Aid
Iseki
E4DE
Cast Iron
Overhead Valve
4
Aluminum
Ductile Iron
3.8 (97)
3.9 (100)
180.4 (2.9)
21.5
Natural
Glow Plug
310-1
SPECIFICATIONS
ENGINE SYSTEMS
Cooling System
Type
Temperature Control
Fan
Drive
Water Pump
Type
Drive
Air Intake System
Intake Location
Air Cleaner
Type
Number of Elements
Material
Exhaust System
Type
Muffler Location
Spark Arrestor
Fuel System
Type of Injection
Injection Pump
Type
Drive
Governor
Type
Lubrication System
Type
Filter
Number of Filters
Pressurized Liquid
Single Thermostat
Centrifugal
Under hood
Dry
2
Pleated Paper
NA
Horizontal
Under Hood
AN
Indirect
Inline
Engine Timed Gears
Mechanical
975-2800
Pressure Lube
Spin on
1
310-2
SPECIFICATIONS
Power Train
Clutch
Engine Clutch Type
Control & Actuation
Transmission (Platform)
Type
Speeds
Gears
Ranges
Shuttle Type
Transmission (Cab)
Type
Speeds
Gears
Ranges
Shuttle Type
Dry Single Disc
Mechanical
10.8 (275)
8x8 SynchroShuttle
8F - 8R
4
LH Console
2
LH Console
SynchroShuttle
LH Dash
12x12 PowerShuttle
12F - 12R
4
LH Console
3
LH Console
PowerShuttle
LH Dash
Wet Multi-disc
Differential
Type
Differential Lock
Type
Engagement
Final Drive
Type
Brakes
Rear
Actuation
Parking Brake
Pedal
Mechanical
Wet Multi Disc
2 Pedals
Hook Type
310-3
SPECIFICATIONS
FRAMES AND AXLES
Rear Axle
Type
Tread Settings: Min - Max, in (mm)
Rear Axle Capacity
4WD Front Axle
Drive
Drive Shaft Shield
Drive Ratio
Flange
52.4 (1330)-60.2 (1530)
4630 (2100)
57
Mechanical
Yes
1.62
Mechanical Lever
54.5 (1385)
4630 (2100)
Three Point Hitch
ASAE Hitch Category
1
1
Controls
RH Console
Type of Stabilizers
Telescopic
Type of Link Ends
Telescopic
Draft Sensing
Optional
3086 (1400)
3483 (1580)
Type
Independent
Speeds (rpm)
540
Control
Instrument Panel
Disconnect Control
LH Console
Clutch
Wet multi Disc
Shaft Configuration
1.37 (35)
PTO Brake
Yes
Mid PTO
NA
Type
Speeds (rpm)
Control
Disconnect Control
Clutch
Shaft Configuration
PTO Brake
NOTE:
Drawbar
Type
Fixed
880 (400)
310-4
SPECIFICATIONS
HYDRAULICS
Total System
Flow: gpm (Lpm)
SS
PS
Number of Pumps
Type of System
Steering
Type
Pump Type
Pump Drive
Flow: gpm (Lpm)
SS
PS
Filters
Number
Type
Pressure psi (bar)
Number Available
Cab
Platform
Location
Joystick
Lockout
17.8 (67.6)
18.7 (70.8)
2
Open Center
Hydrostatic
Gear
Engine Timing Gear
5.3 (20.1)
6.4 (24.2)
1
12.3 (46.7)
2276 (157)
3 Optional
Rear
Standard
Yes
4/mid mount
ELECTRICAL SYSTEM
Alternator
Platform
Cab
Battery
Battery Description
Capacity (V.Ah)
CCA
Lighting (Platform)
Front
Hazard Flashers
Turn Signals
Lighting (Cab)
Front
Rear
Hazard Flashers
Turn Signals
40A
60A
115D31R
12V72A
710A
2
2
2 roof mounted
2
2
310-5
SPECIFICATIONS
OPERATOR AREA
Type and Controls
Floor Mat Type
Pedals
Steering Wheel
Seat
Seat Belt Type
Hood Type
SMV Emblem
Beverage Holder
Cab Features
Number of Doors
Number of Vents
Mirrors
Sun Visor
Front Wiper
Rear Wiper
Interior Light
Instrument Panel
DC Outlet
Instrumentation
Fuel Gauge
High Beam Indicator
Glow Plug Indicator
Rubber
Suspended
3 Position Tilt
Folding
ASAE J2194
Deluxe
Retractable
1 Piece Flip up
Yes
Standard
2
49.5 (4.6)
80
8
2
NA
Standard
Standard
Standard
Standard
Deluxe Digital
Standard
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
CAPACITIES
Engine
Fuel Tank: gal (L)
Platform
Cab
Power Train
8.5 (8.0)
13.2 (50)
13.2 (50)
8.0 (7.6)
10 (38)
6.9 (6.5)
310-6
SPECIFICATIONS
With R1 Tires
Dimensions
Wheel Base in (mm)
Overall Height
Top of Cab
Overall Width
Ground Clearance
Front Tires
Rim Type
Rear Tires
Rim Type
76 (1930)
132.7 (3370)
103.1 (2620)
90.2 (2290)
67.3 (1710)
14.8 (375)
Fixed
54.5 (1385)
Adjustable
52.4 (1330)
60.2 (1530)
9.5 (2.9)
Weights
Cab (PowerShuttle)
3770 (1710)
4100 (1860)
310-7
SPECIFICATIONS
GENERAL
Massey Ferguson®
1660
Compact
Make
Model
Class
PERFORMANCE
Engine
Rated Engine rpm
PTO*
DyanQPS™
PowerShuttle
60.0 (44.7)
56.2 (41.9)
2600
3.7
164.2
44.9 (33.5)
46.4 (34.5)
ENGINE GENERAL
Manufacturer
Model
Type
Cylinder Block
Number of Cylinders
Pistons
Crankshaft
Bore: in (mm)
Stroke: in (mm)
Compression Ratio
Aspiration
Starting Aid
Iseki
E4DE
Cast Iron
Overhead Valve
4
Aluminum
Ductile Iron
3.8 (97)
3.9 (100)
180.02 (2.9)
21.5
Natural
Glow Plug
Field Installed Optional
310-1
SPECIFICATIONS
ENGINE SYSTEMS
Cooling System
Type
Temperature Control
Fan
Drive
Water Pump
Type
Drive
Air Intake System
Intake Location
Air Cleaner
Type
Number of Elements
Material
Exhaust System
Type
Muffler Location
Spark Arrestor
Fuel System
Type of Injection
Injection Pump
Type
Drive
Governor
Type
Lubrication System
Type
Filter
Number of Filters
Pressurized Liquid
Single Thermostat
Centurial
Common with Fan Drive
Under Hood
Dry
2
Pleated Paper
NA
Horizontal
Under Hood
NA
Indirect
Inline
Engine Timing Gears
Mechanical
975-2850
Pressure Lube
Spin on
1
310-2
SPECIFICATIONS
Power Train
Clutch
Engine Clutch Type
Control & Actuation
Transmission (Platform)
Type
Speeds
Gears
Ranges
Shuttle Type
Transmission (Cab)
Type
Speeds
Gears
Ranges
Shuttle Type
Wet Multi-disc
Mechanical
12x12 PowerShuttle
12F - 12R
4
LH Console
3
LH Console
PowerShuttle
LH Dash
Wet Multi-disc
DyanQPS™
12F - 12R
4
LH Console
3
LH Console
PowerShuttle
LH Dash
Wet Multi-disc
Differential
Type
Differential Lock
Type
Engagement
Final Drive
Type
Brakes
Rear
Actuation
Parking Brake
Ring Gear & Pinion
Cast Iron
Pedal
Mechanical
Outboard Spur Gear
Wet Multi Disc
Mechanical Lever
Hook Type
310-3
SPECIFICATIONS
FRAMES AND AXLES
Rear Axle
Type
Tread Settings: in (mm)
4WD Front Axle
Drive
Drive Shaft Shield
Drive Ratio
Flange
57.5 (1460)
4630 (2100)
57
Mechanical
Yes
1.68
Mechanical Lever
54.5 (1385)
4630 (2100)
Three Point Hitch
ASAE Hitch Category
1/2
1
Controls
RH Console
Type of Stabilizers
Telescopic
Type of Link Ends
Telescopic
Draft Sensing
Optional
3307 (1500)
3748 (1700)
Type
Independent
Speeds (rpm)
540
Control
Disconnect Control
LH Console
Clutch
Wet Multi Disc
Shaft Configuration
1.37 (35)
PTO Brake
Yes
Mid PTO
NA
Type
Speeds (rpm)
Control
Disconnect Control
Clutch
Shaft Configuration
PTO Brake
NOTE:
Drawbar
Type
Fixed
880 (400)
310-4
SPECIFICATIONS
HYDRAULICS
Total System
Flow: gpm (Lpm)
Number of Pumps
Type of System
Steering
Type
Pump Type
Pump Drive
Flow: gpm (Lpm)
Filters
Number
Type
Pressure psi (bar)
Number Available
Cab
Platform
Location
Joystick
Lockout
19.6 (74.2)
2
Open Center
Hydrostatic
Gear
Engine Timing Gears
6.8 (25.6)
1
12.8 (48.6)
2276 (157)
3 Optional
Rear
Standard
Yes
4/mid mount
ELECTRICAL SYSTEM
Alternator
Platform
Cab
Battery
Battery Description
Capacity (V.Ah)
CCA
Lighting (Platform)
Front
Hazard Flashers
Turn Signals
Lighting (Cab)
Front
Rear
Hazard Flashers
Turn Signals
40A
60A
115D31R
12V72A
710A
2 low beams/2 high beams
2
2
2 low beams/2 high beams
2 Roof Mounted
2
2
310-5
SPECIFICATIONS
OPERATOR AREA
Type and Controls
Floor Mat Type
Pedals
Steering Wheel
Seat
Seat Belt Type
Hood Type
SMV Emblem
Beverage Holder
Cab Features
Number of Doors
Number of Vents
Mirrors
Sun Visor
Front Wiper
Rear Wiper
Interior Light
Instrument Panel
DC Outlet
Instrumentation
Fuel Gauge
High Beam Indicator
Glow Plug Indicator
Rubber
Suspended
3 Position Tilt
Folding
ASAE J2194
Deluxe
Retractable
1 Piece Flip up
Yes
Standard
2
49.5 (4.6)
82.5
8
2
NA
Standard
Standard
Standard
Standard
Deluxe Digital
Standard
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
CAPACITIES
Engine
Fuel Tank: gal (L)
Platform
Cab
Power Train
8.5 (8.0)
13.2 (50)
13.2 (50)
8.0 (7.6)
11.4 (43)
Common w/ Transmission
9.0 (8.5)
310-6
SPECIFICATIONS
With R1 Tires
Dimensions
Wheel Base in (mm)
Overall Height
Top of Cab
Overall Width
Ground Clearance
Front Tires
Rim Type
Rear Tires
Rim Type
78.7 (2000)
134.6 (3420)
104.1 (2645)
91.1 (2315)
70.9 (1800)
15.7 (400)
Fixed
54.5 (1385)
Adjustable
57.5 (1460)
9.5 (2.9)
Weights
Cab (DynaQPS)
4079 (1850)
4453 (2020)
310-7
LOADERS
Massey Ferguson loaders are designed specifically for our tractors and there are loaders
available for all our compact tractors. The DL series loaders use a pedestal mount design that
makes loader installation and removal easy. The curved loader arms give the operator improved visibility as well as giving the tractor a sleek look.
The DL120 fits on the 1635 and 1643. There are a variety of bucket sizes to choose from as
well as pallet forks.
The DL130 fits on the 1648, 1652, 1655 and 1660. With a variety of attachments available it
will be easy to complete any chore.
290-1
Loader Removal
To remove the loader:
Lower parking stands, then lower loader to the
ground.
Remove pins.
Use hydraulics to raise loader frame out of the
mounts.
Disconnect the hydraulics hoses.
Back away from the loader.
290-2
Pin On Type
Pin on type attachments are standard equipment.
Pin On Type Quick Attach
Pin on type quick attach kits are available to
make it possible to change attachments without the use of tools.
Skid Steer Type Quick Attach
A skid steer type quick attach kit is also available. This kit makes it possible to use any skid
steer type attachments with the loader.
290-3
SPECIFICATIONS
MASSEY FERGUSON® DL120
GENERAL
Massey Ferguson®
DL120
Compact Loader
1635
8-16
13.6x24
Make
Model
Class
Tractor Model Used for Testing
Front Tire Size
Rear Tire Size
PERFORMANCE
A. Maximum Lift Height @ Pivot Pin: in (mm)
B. Lift Height Under Level Bucket: in (mm)
C. Clearance Under Dumped Bucket (45 degrees): in (mm)
D. Reach @ Maximum Height: in (mm)
E. Dump Angle
F. Reach on Ground: in (mm)
G. Roll Back Angle
H. Digging Depth: in (mm)
U. Lift Capacity to Full Height @ Pivot Pins w/o Bucket: lbs (kg)
V. Lift Capacity to Full Height @ 500mm Forward Pivot Pins: lbs (kg)
W. Lift Capacity to 59” @ Pivot Pins: lbs (kg)
Y. Breakout Force @ Pivot Pins: lbs (kg)
Z. Breakout Force @ 500 mm Forward Pivot Pins: lbs (kg)
Cycle Times
Up
Down
Roll Back
Dump
102 (2591)
94.5 (2400)
80 (2032)
15 (381)
47
58 (1473)
30
6.5 (165)
1900 (862)
1314 (596)
1813 (822)
2562 (1162)
1841 (835)
3.5 seconds
2.1 seconds
1.9 seconds
3.7 seconds
FEATURES
Mount Type
Amplifying Links
Parking Stands
Bucket Quick Attach Options
Pedestal
Yes
Yes
Pin type, Skid steer type
310-1
SPECIFICATIONS
310-2
SPECIFICATIONS
GENERAL
Massey Ferguson®
DL130
Compact Loader
1648
9.5x16
13.6x28
Make
Model
Class
Tractor Model Used for Testing
Front Tire Size
Rear Tire Size
PERFORMANCE
A. Maximum Lift Height @ Pivot Pin: in (mm)
B. Lift Height Under Level Bucket: in (mm)
C. Clearance Under Dumped Bucket (45 degrees): in (mm)
D. Reach @ Maximum Height: in (mm)
E. Dump Angle
F. Reach on Ground: in (mm)
G. Roll Back Angle
H. Digging Depth: in (mm)
U. Lift Capacity to Full Height @ Pivot Pins w/o Bucket: lbs (kg)
V. Lift Capacity to Full Height @ 500mm Forward Pivot Pins: lbs (kg)
W. Lift Capacity to 59” @ Pivot Pins: lbs (kg)
Y. Breakout Force @ Pivot Pins: lbs (kg)
Z. Breakout Force @ 500 mm Forward Pivot Pins: lbs (kg)
Cycle Times
Up
Down
Roll Back
Dump
113.5 (2883)
104.5 (2654)
83 (2108)
21 (533)
48
77 (1956)
28
4.6 (117)
2527 (1146)
1803 (818)
2648 (1201)
3055 (1386)
2307 (1046)
5.5 seconds
3.1 seconds
3.7 seconds
5 seconds
FEATURES
Mount Type
Amplifying Links
Parking Stands
Bucket Quick Attach Options
Pedestal
Yes
Yes
Pin type, Skid steer type
310-1
SPECIFICATIONS
310-2

1600 series

Transcription

Similar documents

FRIENDS OF Massey Limited Edition

orchard park elementary - Kettering City School District

TRACTOR - Shibaura

isuzu - Team-BHP

sb50 super cab

33 Series Sweeperweb

Goshen Coach proudly introduces the latest in Hybrid innovations