final program - NACE International

Transcription

FINAL PROGRAM
OFFICIAL MEDIA PARTNERS
MATERIALS
PERFORMANCE
CORROSION PREVENTION AND CONTROL WORLDWIDE
August 31 - September 2, 2015
St. Louis, Missouri, USA
Thank You to Our Generous Sponsors
Welcome to the 2015 Central Area Conference
Schedule of Events
DAY
EVENT
TIME
Sunday, August 30
Registration Open
2 to 5 p.m.
Registration Open
9 a.m. to 5 p.m.
Exhibit Hall Set-Up
12 to 3 p.m.
Exhibit Hall Open
3 to 7 p.m.
Exhibit Hall Opening Reception
5 to 7 p.m.
Registration Open
2 to 5 p.m.
Exhibit Hall Open
9:30 a.m. to 5:30 p.m.
Happy Hour in the Hall
5:30 to 6:30 p.m.
St. Louis Cardinals vs. Washington
Nationals at Ballpark Village
6:30 to 10 p.m.
Registration Open
8 to 10 a.m.
Exhibit Hall Open
9 to 10:15 a.m.
Exhibit Hall Move-Out
10:15 a.m. to 12:30 p.m.
Monday, August 31
Tuesday, September 1
Wednesday,
September 2
REOD
TM
Legal Consulting | Coating Inspections
Conference Committee
1
Central Area Conference Final Program
POSITION
NAME
COMPANY NAME
Chair
Christian Niebling
RCN Technical Solutions
Co-Chair
Bob Puyear
Past NACE President, Retired
Sponsorships & Exhibits
Randy Berthold
AkzoNobel Powder Coatings
Social Activities
Eric Nenninger
US Coatings
Technical Program Chair
Cris Conner
Utility Service & Maintenance, Inc.
Technical Program Vice Chair
Bob Niebling
RCN Technical Solutions
Coatings Track Program Chair
Paul Litzsinger
US Coatings
Pipeline Protection/Cathodic Protection
Track Program Chair
Mark Lauber
Laclede Gas Company
2
Hotel and Aerial Maps
Contractor Qualification Rap ‘n Rye
-Ballroom D
Awards Luncheon
- Ballroom C
Conference attendees,
Session Rooms
- Regency Ballrooms A, B
Registration
- Foyer B
The Greater St. Louis Section and Central Area Conference 2015 Committee welcome
Signature Service
Amenities and Services
Amenities and Services
Pipeline Safety Rap ’n Rye
Amenities an
- Regency Ballroom C
you to St. Louis. Whether you are new to the corrosion industry or a seasoned professional, we
Exhibit Hall
- 16 Midway
are confident that you will find this conference informative and enjoyable. You are sure to find
new insight and solutions to your corrosion questions from both the exhibitors and technical
programs. With our setting being the historical Union Station and the Gateway Arch just a few
blocks away, there is much to see outside of the conference as well. All paid attendees will also
St. Louis Union Station and DoubleTree by
For Your Business Convenience
For Your Fitness and Recreation
enjoy our night at Ballpark village, which also grants you access to Busch Stadium. We thank you
Hilton Hotel. It’s a winner of USA Today's
for taking the time to enjoy the show and our beautiful city.
Top Ten Best Historic Hotels. Your stay at
Meeting Rooms
Business Center
Complimentary WiFi in Lobby
Printing Services
Express Mail
Fax
Audio Visual Equipment Rental On Site
Video Conference Available
Fitness Center
Swimming Pool (Summer)
Running, Walking & Biking Tours
Golf Excursions
Sporting Events
Cribs
Full Size pull out couches
Rollaway Beds
Family Packages Offered
Pet Friendly
our AAA Four Diamond Property comes with
Regards,
a warm signature chocolate chip cookie, a
Central Area Conference Chair
welcoming gift to exemplify our warm hospitality and personalized service to make your
For Your Comfo
Valet Parking
Self Parking
Concierge De
Baggage Stor
Valet Laundry
Automated Te
Elevators
Grand Hall Ma
Multiple Bar A
Multiple Dinin
Room Service
On-Site Conv
Safety Depos
On-Site Mail
Restaurants/D
stay memorable and enjoyable. Welcome!
Christian R. Niebling
The Restaurant at the Cheshire
Just blocks from Forest Park Zoo
3
7036 Clayton Avenue
St. Louis, Missouri 63117
(314) 932-7818
www.restaurant-stl.com
Basso
Just blocks from Forest Park Zoo
7036 Clayton Avenue
Three Sixty: Rooftop Bar St. Louis
Just blocks from Busch Stadium
Hilton St. Louis at the Ballpark
One South Broadway
St. Louis, Missouri 63102
(314) 241-8439
www.360-stl.com
The Grand Hall at St. Louis Union Station
Just blocks from the Gateway Arch
1820 Market Street
St. Louis Union Station and DoubleTree by Hilton Hotel
1820 Market Street
St Louis, Missouri 63103 USA
TEL: (314) 621-5262
4
Exhibit Hall Map
Unlimited
Canusa
International,
CPSInc
Shafer
Col-Met
Step-Ko
Kline
Engineered
&
Products,
Finishing
Warren
L.L.C.
Solutions
Inc.
509508
608
Shafer
Kline
&
Warren
Inc.
509
Polygon
Sherwin-Williams
US
Co.
Corporation
ALS
Sentry
Oil
Trenton
Equipment
andCorp. Corporation
Gas
507506
606
Insulation
ALS
Systems,
Oil
Trenton
Ltd.
and 607 Corporation
507 Gas
606
Pigs
Pigs
Unlimited
International,
Inc
409408
408
Polygon
US
Corporation
407406
406
SSPC:
Society
for
Protective
Coatings
SSPC:
Society
for
Protective
Coatings
Industrial
Fabrics,
Inc.
504
404
404
403402
402
503502
General
Corrosion
Corporation
General
Corrosion
Corporation
301
Fischer
Technology
Inc
313
301
Specialty
Polymer
Metal
Coatings
Samples
Inc
CHLOR*RID
International
Inc
Metal
Samples
302
304
306
302
Amcorr
Products
Tnemec
&
Company
Service
Inc
VISCOTAQ
203
205
Specialty
Mears
CHLOR*RID
ABRIOX,
Polymer
International
Group
Coatings
Inc.
Inc
Inc
Inc
308
310306
304
Tnemec
RK&K,
Company
LLP
Inc
RANCE ENTRANCE
207
203
Amcorr
Products
Brown
Corrosion
Services
Inc
RK&K,
LLP
Montipower
&
Inc.
Service
VISCOTAQ
209
205
211207
Subsurface
Solutions
315
ARCHWAY
ARCHWAY
Fischer
REOD,
Technology
LLCInc
317313
Advance
Mears Milliken
Products
Pipe
ABRIOX,
&
Group Wrap,
Inc.
Systems
Inc.
Inc
Inc
314310
316
308
Brown
Corrosion
Elcometer
Services
Inc
Montipower
Inc.
215211
209
Champion
Corrosion
Products
Inc
217
ARCHWAY STEPS
NRI
Neptune
Briem
Subsurface
Research
Solutions Engineering
Inc.
319315
Milliken
MATCOR,
Pipe
Wrap,
Inc.
318314 Inc.
REOD,
LLC
321317
219215
Inc.
321
Clemco
Corrosion
Industries
Products
Corp.
221217
323
333
Inc
North
American
Element
Clemco
Vivax-Metrotech
Materials
Survey
Industries
Corp.
Technology
Corp.
Corporation
223219
225221
Element
Materials
Technology
223
335
North
Piping
and
American
Corrosion
Survey
Specialties,
Corporation
229 Inc.
337
331
334330
Baker
Hughes
233
225
503
602
McDonald
Stuart
Service
Steel
Protection
Enterprises,
LLCCorp
332
328324
322
Rohrback
Cosasco603
TEAM
Industrial
Services
Inc
Jotun
Paints
USA
603
602
Glas
Mesh
235231 Co
Farwest
Corrosion
Control
Company
333
Amerapex
King
WrapMaster,
PK
Innovation
Corporation
Technology
Inc.
335
Clean
Harbors
Energy
&
Industrial
Services
332
341
337
McDonald
Raven
Pacific
Service
Lining
Enterprises, Sensor
Systems
LLC
338334
340
Farwest
Baker MSES
Corrosion
Control
Hughes Consultants
Company
233
ARCHWAY
ARCHWAY
WrapMaster,
Coastal
PK Advanced
Polymerics,
Inc. CorrosionTechnology
Control
Inc.
Clean
Harbors
Energy
&
Industrial
Services
GMA
Garnet
Corrpro
Group
Loresco
International
604
TEAM
Industrial
Services
Inc
Jotun
Paints
USA
ARCHWAY
ARCHWAY
Advanced
Polymerics,
Inc.
Carboline
Company
GMA
Advance
CP
CP
Products
Loresco
MATCOR, Garnet
&
Masters
Masters
International
Inc.
Systems
Group
Inc
Inc
320316 Inc 322318
324320
Champion
Vivax-Metrotech
Elcometer
Corp.
323319
Briem
Engineering
607
RAMP
STEPS
ARCHWAY
NRI
Neptune
Carboline
Research
Company
ULVA
Insulation
Systems,
Ltd.
Technical
Toolboxes
604
RAMP
ARCHWAY
608
ULVA
Technical
Toolboxes
WaterJet
Technology
Rohrback
Association
Cosasco
(WJTA)
RAM-100
AZZ
International,
Galvanizing
LLC
RAM-100
International,
LLC
Step-Ko
Products,
L.L.C.
239235
Dixie
Testing
&
Products,
Inc.
241
343
ARCHWAY
Amerapex
Corporation
PPG
Protective
King
&
Innovation
Marine
Coatings
Allan
Raven
Allan
Ballast
U.S.
Pacific
Tools
Edwards
Lining Coatings
Edwards
Sensor Equipment
Inc.
Systems
Inc.
342338
344340
346342
Dixie
Energy
Testing
MSES
Economics
&
Consultants
Inc.
Products,
TruQC
243239
245241
Inc.
Cathodic
Technology
Ltd
TruQC
247243
ARCHWAY
ARCHWAY
ARCHWAY
PPG
Protective
&
Marine
Coatings
347
343
341
ARCHWAY
ARCHWAY
347
U.S.
Coatings
344
Energy
Economics
Inc.
245
Ballast
Tools
Equipment
346
STAIRCASE STAIRCASE
Cathodic
Technology
Ltd
247
HOTEL TO HOTEL
Kantex
Industries
202
Dairyland
Kantex
Electrical
Industries
Industries
MESA
204
206
202
Brance-Krachy
Co
Inc
Dairyland
KnightHawk
Electrical
Engineering
MESA
208
204
Industries
210206
Brance-Krachy
Co
Inc
Tinker
Mobiltex
KnightHawk
&
Technologies
Engineering
Inc.
Rasor
214210
208
Allied
Protech
EIS
Elecsys
Corporation
103
105
R.U.S.T.
106
5
Corrosion
Chapman Elecsys
Protech
Industries,
EngineeringCorporation
EIS
Inc
103109
105111
DeFelsko
R.U.S.T.
Corporation
108106
Chapman
Engineering
109
216
Allied
Corrosion
Multi-Chem
Industries,
Inc
111
117
Tinker
ROSEN
&
USA
Rasor
218214
T.D.
Williamson,
Inc.
119
JW's
Pipeline
EN
Mobiltex
Integrity
Technologies Engineering,
Services,
LLC
Inc.
220 LLC
222
216
218
224220
T.D.
Bass
American
Williamson,
Engineering
Innovations
Inc.
Multi-Chem
121
117
DeFelsko
Corporation
108
JW's
Pipeline
ROSEN Polyguard
Products,
Integrity
Inc.
Services,
USA
122
123
119
Enduro
Pipeline
Services
LLC
222
Bass
Engineering
121
Zerust
Polyguard
Oil
Products,
andInc.
Gas
228224
EN
Engineering,
LLC
SAE,
Inc.
234230
Galvotec
Corrosion
Services
EnhanceCo
Dynamic
Monitoring
232
Cathodic
Protection
American
Management,
Innovations
Inc.
123
Enduro
Whitford
Pipeline
Corporation
Services
122 126
EnhanceCo
Dynamic
Monitoring
232
Thomas
Galvotec
Industrial
Corrosion
Coatings
Services
238234
Denso
North
America
135
133
Whitford
Corporation
126
Citadel
Technologies
Inc
134
IRT
Integrated
Mercer
Rectifier
Technical
Technologies,
Services
Inc.
136
132
BGL
Thomas
Asset
Industrial
Services
Coatings
LLC
242238
NALCO
SealBGL
Champion,
KTA-Tator
forAsset
an
Life
Inc
Services
Ecolab
Industries
244240Company 246242 LLC
KTA-Tator
Inc
244
Seal
for
Life
Industries
246
Denso
North
America
135
3M
129
NALCO
Champion,
an
Ecolab
Company
240
Citadel
Technologies
Inc
134
IRT
Integrated
Rectifier
Technologies,
Inc.
136
2015 CENTRAL AREA CONFERENCE
AUGUST 31 - SEPT 3, 2015
ST. LOUIS UNION STATION HOTEL
A DOUBLE TREE BY HILTON
MIDWAY ROOM
AND
= Area
COULMN
AND =Final
COULMN
Central
Conference
Program
6
Central Area Conference 2014 Award Winners
Schedule at a Glance
The Eben Junkin Award
Given in recognition of an individual’s significant contributions
with respect to NACE related activities and education.
Jane Brown started Brown Corrosion Services, Inc., 21 years ago with
her father, Jerry Brown. Previous to BCSI starting, Jane worked for other
corrosion companies in the areas of monitoring and atmospheric
dehumidification. Since 1995, Jane started her involvement with the local
Houston Section, learning the art of NACE volunteering from the NACE
Houston Mafia – a group of gentlemen who served NACE with passion for
corrosion, enthusiasm for the industry, belief in the power of education and
commitment to having NACE serve as many members as possible through
networking, business opportunities and education. Jane has co-chaired
two NACE Central Conferences, served on all the seats in both the Houston
Section and Central Area Boards, serves as the current Central Area Director
and ACC Chair through 2016, and lots of other fun NACE stuff!
The Janice Redding Vendor Appreciation Award
Given in recognition of a vendor’s significant
involvement in the Central Area activities including,
exhibiting, speaking, training & providing time to
allow employees to volunteer.
Monday August 31, 2015
8:00 a.m.
REGISTRATION OPEN — Foyer B
9:00 a.m. 12:00 p.m
CENTRAL AREA BOARD OF DIRECTORS MEETING
Room: Conductor Room
Pipeline Protection Track- Cathodic
Protection and Integrity Management
Chaired by Mark Lauber, Laclede Gas
Regency A
Coatings for Pipeline &
Petrochemical Track
Chaired by Paul Litzsinger, US Coatings
Regency B
1:00 - 1:30 p.m.
Utilizing In Line Inspection &
Non Destructive Evaluation for
Establishing Pipe Properties
Presented by Lloyd Pirtle, TDW
How to Avoid Premature
Coatings Failures
Presented by Mike O’Brien
MARK 10 Resource Group, Inc.
1:30 - 2:00 p.m.
Robotic In-Line Inspection of
Non-piggable Pipeline Segments
Presented by Rod Lee, Pipetel
2:00 - 2:30 p.m
CUI Control as a System
Presented by Art MacKinnon, PPG
2:30 - 3:00 p.m.
C-Scan Pipeline Inspection
Presented by
Cal Chapman, Chapman Engineering
Last year’s recipient is Dairyland Electrical Industries.
Dairyland started in 1983, formed by Henry Tachick
to address an overlooked need in the power utility
industry for a solid-state switching product to safely
serve their farm customers. Named “Dairyland,” the
company is based in Wisconsin - the home of milk and cheese, inhabited by friendly people whose vehicles
carry the state motto “America’s Dairyland” on their license plates. As the company grew, additional power
utility products brought the company into the cathodic protection arena, which lead to a broad array of
devices for applications on pipelines, tanks, boats, wells, and other interesting and unusual variants. The
industry was introduced to a new term – decoupler – and old technologies gave way to new. The present
product line addresses needs in various industries for over-voltage protection, safety grounding, and cathodic
protection improvement. Dairyland is very aware of the need for education on these topics, speaking often at
industry conferences and training sessions on best safety and CP practices, and freely helping all who need
technical assistance. New training videos, tools, and articles are regularly generated to guide the industry.
In 2013, the company achieved ISO 9001 certification, indicating that a very effective quality system was in
place to govern all aspects of company operation. Guiding all operations is the attitude of total customer
service, attempting to use each employee’s God-given talents for a higher purpose of serving all.
3:00 - 3:30 p.m.
3:30 - 4:00 p.m.
New Construction Pipeline Challenges
Presented by
Kimberly-Joy Harris,
Enbridge Pipelines Inc.
Relating Surface Profile and
Peak Density to Coating Adhesion
Presented by
David Beamish, DeFelsko
4:00 - 5:00 p.m.
Rap ‘n Rye Session
Pipeline Safety Panel Discussion
Regency Ballroom C
Sponsored by: Elecsys
Allen Beshore - PHMSA,
Kimberly-Joy Harris, Enbridge,
Mark Clayton, Centerpoint Pipeline
Rap ‘n Rye Session
Contractor Qualification Programs
Grand Ballroom D
Sponsored by Clemco
5:00 - 7:00 p.m.
EXHIBIT HALL OPENING RECEPTION — The Midway at St. Louis Union Station
The 2015 Central Area Conference Award Winners will be announced at the Awards Luncheon
Sponsored by Carboline on Thursday at noon in Grand Ballroom A, B & C.
7
AFTERNOON REFRESHMENT BREAK —
The Midway at St. Louis Union Station
8
Pipeline Safety and Regulatory Issues
Chaired by Mark Lauber,
Laclede Gas
Regency A
Corrosion in Transportation
Infrastructure Track:
“Bridges, Barges and Railcars”
Chaired by Paul Litzsinger,
US Coatings
Regency B
1:30 - 2:00 p.m.
Well Casing CP Program Case Study
Presented by Jon-Michael Brand,
CP Masters
The Need of the Joint Applicator
Standard (NACE 13 / SSPC ACS-1)
and Are Changes Coming?
Presented by Anton Ruesing, IUPAT
2:00 - 2:30 p.m.
Examination of the NACE -.850 V Criteria
Presented by Jack Smart,
John Smart Consulting Engineer
MoDOT/Taking on Corrosion
as Cost Will Allow
Presented by Todd Bennett,
MoDOT
2:30 - 3:00 p.m.
Technological Advances in
Remote Monitoring for AC Mitigation
Presented by Jamey Hilleary,
Elecsys Corp
Galvanize Your Bridge for
Corrosion Protection
Presented by Kevin Irving,
AZZ Galvanizing
Tuesday September 1, 2015
7:30 a.m.
8:30 - 9:00 a.m.
9:00 - 9:30 a.m.
9:30 - 10:00 a.m
10:00 - 10:30 a.m.
10:30 - 11:00 a.m.
11:00 - 11:30 a.m.
11:30 a.m. 12:00 p.m.
Pipeline Protection Track- Cathodic
Protection and Integrity Management
Regency A
Petrochemical Track
Regency B
IR Drop Compensation Case Study
Presented by Chad Farris,
Laclede Gas
Pipeline Coatings, Thick vs Thin,
The Question!
Presented by Bob Buchanan,
Seal for Life Industries
Protecting Steel Pipelines with a Duplex
Epoxy and Enamel Coating
Presented by Fujian Tang,
Missouri University of Science and Technology
Environmentally-Friendly
Automated Field Joint Coatings
Presented by Rick Kimpel,
CRTS, Inc.
Direct Current Voltage
Gradient Basics
Presented by Mark Anderson,
QPS Engineering
Introduction to Polyamide 11
Powder Coatings
Presented by Stephen Serpe,
Arkema
In Line Inspection vs
Direct Assessment vs Hydro
Presented by Jim Walton,
JW’s Pipeline Integrity Services
Novel Dual Powder System for High
Temperature Service
Presented by Jason Kiely,
Rivertop Renewables
MORNING REFRESHMENT BREAK — The Midway at St. Louis Union Station
AC Interference Mechanisms
and Mitigation Strategies
Presented by Kurt Lawson,
Mears
Manual Application of
Fusion Bonded Epoxies
- Lessons Learned
Presented by Richard Kelly,
Turner Industries
IR Drop Considerations for
Directly Connected Anodes
Presented by Jim Warner,
Consumers Energy
Microcrystalline Wax and Petrolatum Tape
Coating Systems for
Metal Pipe and Fittings
Presented by Frank Rampton,
Trenton Corporation
12:00 - 1:30 p.m.
9
AWARDS LUNCHEON — Grand A, B, C
3:00 - 3:30 p.m.
AFTERNOON REFRESHMENT BREAK — The Midway at St. Louis Union Station
3:30 - 4:00 p.m.
Short/Stray Current Mitigation
Using Decoupling Devices
Presented by Ken Davis,
Ameren
Bakken Shale Oil and the Unique
Requirements for Lining Performance
Presented by E.J. Johnson,
Jotun
4:00 - 4:30 p.m.
Addressing Safety and
CP Isolation
in Complex Facilities
Presented by Mike Tachick,
Dairyland Electric
Microbiologically Assisted
Corrosion of Underground
Steel H-Piles
Presented by Ali Abu-Yosef, PhD,
Pivot Engineers
4:30 - 5:00 p.m.
CP Disbondment Testing of
Composite Repair Systems
Presented by David Hunter,
NRI (Neptune Research, Inc.)
5:00 - 5:30 p.m.
CP Transfer Corrosion at Isolation Flanges
Presented by Michael Ames,
Chapman Engineering
Basic Workshop: Proper Use of
Coatings Inspection Instruments
and Standards
Presented by
Matthew Fajt and Greg Richards,
KTA - Tator, Inc.
5:30 - 6:30 p.m.
EXHIBIT HALL HAPPY HOUR — The Midway at St. Louis Union Station
6:30 - 10:00 p.m.
NETWORKING RECEPTION — St. Louis Ballpark Village
10
Exhibitors
Wednesday September 2, 2015
8:00 a.m.
8:30 - 9:00 a.m
9:00 - 9:30 a.m.
9:30 - 10:00 a.m.
10:00 - 10:15 a.m.
10:15 - 10:45 a.m.
10:45 - 11:15 a.m.
11:15 - 11:45 a.m.
11
Pipeline Safety and Regulatory Issues
Regency A
Petrochemical Track
Regency B
Are You Qualified to Assess
Corrosion Defects?
Presented by Joe Pikas,
Technical Toolboxes
Advances in Insulative Coatings Due to
Two-Component Technology
Presented by Mary Roley and
David Walkup,
Carboline
Surveys in the Cloud
Presented by Joshua Greer,
TVC Solutions
Stonewool Insulation – Energy
Savings, Corrosion Under
Insulation & Technical Expertise
Presented by Abraham Sebastian,
Roxul Insulation
Indirect Survey
- Missing the Assessment Opportunity
Presented by Britney Taylor,
Campos EPC
Flexible Non-Metallic Cladding
- Stop Corrosion at the Source
Presented by Scott Sinclair,
Ulva-USA
MORNING REFRESHMENT BREAK — The Midway at St. Louis Union Station
Corrosion Inhibitor Use for AST
and Cased Pipeline
Presented by Tim Whited,
MESA
Pre-Insulated Piping Solutions
to Mitigate CUI
Presented by Sid Siddharth,
Perma Pipe
Pipeline Monitoring Utilizing
Aerial Systems and Analytics
Presented by Steven Fargo,
Midstream Integrity Services
Chemically Bonded Phosphate
Ceramics, A New Approach to
Fighting Corrosion
Presented by Rob Crain,
Advanced Polymerics, Inc.
Solid Oxide Fuel Cells for
Remote CP Power Sources
Presented by Mike Brennan,
Acumentrics
Sheet Pile Containment Wall
Cathodic Protection - Case History
Presented by Ted Huck,
Matcor
3M
Booth # 133
3M Infrastructure Protection Products aspire to be “#1 in infrastructure protection, assessment, and renewal solutions.” Our focus is in oil and gas, water, utility,
and transportation segments, bringing the latest in innovation and technologies to protect and extend the lives of critical infrastructure assets. Our current
portfolio includes 3M™ Scotchkote™ fusion-bonded epoxy and liquid epoxy coatings, trenchless rehabilitation for water pipelines, and electronic devices used
to locate, monitor, and track infrastructure assets. Infrastructure protection and renewal are some of the largest and most strategic segments in many developed
and developing countries throughout the world today. Address: 6801 River Pl. Blvd., Austin, TX 78726. Tel: 1 800-722-6721. E-mail: [email protected].
Web site: 3m.com/corrosion.
Abriox Inc.
Booth # 310
ABRIOX is a dynamic technology company specializing in remote monitoring units (RMUs) for cathodic protection (CP). Our Merlin® rectifier monitor has
earned a reputation as a reliable, easy-to-use RMU with outstanding customer support. The Merlin RMU is small enough to mount inside the rectifier
cabinet and the Merlin HEMI will hide inside a standard test post. The Merlin RMU can be controlled with simple commands from your cell phone.
Technicians can take CP readings or start an interruption cycle in only a few seconds. Address: 15092 St., Rt. 68, Mount Orab, OH 45154. Tel: +1 513-474-0565.
E-mail: megan. [email protected]. Web site: abriox.com.
Advanced Polymerics, Inc.
Booth # 333
Advance Products & Systems, Inc.
Booth # 316
Advance Products & Systems (APS), Inc., founded in 1978, is a leading manufacturer and distributor of water and wastewater, oil and gas, and industrial and
mechanical pipeline products. APS also offers quality safety products manufactured to meet their customers’ needs to protect personnel, equipment, and
the environment. Address: PO Box 60399, Lafayette, LA 70596. Tel: 1 800-315-6009. E-mail: [email protected]. Web site: apsonline.com.
Allan Edwards, Inc.
Booth # 342
Allan Edwards, Inc. is a 4th generation pipeline products provider. From the beginning the Edwards family established values to quality and high integrity
standards. Allan Edwards’ repair sleeves for existing pipelines offer a custom fit every time. To avoid costly shut downs due to corrosion or other pipeline
integrity issues, call Allan Edwards for steel repair sleeves. We offer products such as Red One Rockshield and also specialize in buoyancy control. With over
67 years’ experience, our professional team has the flexibility to offer the best pipeline repair solutions for every pipe situation. Address: 2505 S. 33rd W. Ave.,
Tulsa, OK 74107. Tel: +1 918-583-7184. E-mail: [email protected]. Web site: allanedwards.com.
Allied Corrosion Industries, Inc.
Booth # 111
Pipeline integrity management, AC mitigation, pipeline remediation, external corrosion direct assessment, and cathodic protection system design and
installation are just a few ways that Allied Corrosion Industries has been helping our customers for 35 years. We also offer an array of industry-related
products through our material sales division. Allied Corrosion Industries can assist you with all your corrosion control needs. Address: 1550 Cobb Industrial
Dr. NE, Marietta, GA 30066. Tel: +1 770-425-1355. E-mail: [email protected]. Web site: alliedcorrosion.com.
Amerapex Corporation
Booth # 341
Amerapex provides NDT solutions for the hydrocarbon extractive and process industries. Our network of facilities in the Americas, Europe and Asia connect
our clients to suppliers and our technical and procurement staff. Our engineering and inspection services range from concept, feasibility, design, and
project implementation to operation and maintenance. Amerapex specializes in large scale Corrosion under insulation (CUI) programs utilizing the most
advanced NDT methods on the market today. CUI programs that can be fit to your budget and data management requirements. Our NDT offerings include
examination of Tubing, Piping, Vessels and Tanks using Eddy Current, Remote Field and Near Field, IRIS and Acoustic Eye, Shearwave/Phased Array, EMAT,
Guided Wave and CR/DR Radiography. In addition we provide traditional NDT services and API inspections. Amerapex takes pride in having some of the
best professional inspectors in the industry today. All of our programs and services have been designed with both efficiency and saving our clients’ money
in mind, while providing a top notch service as our ultimate goal. Address: 2950 North Loop West, Suite 1100, Houston, TX, 77092. Tel: 713-263-0900. E-mail:
[email protected]. Web site: amerapex.com
12
AMCORR Products/VISCOTAAQ
Booth # 205
VISCOTAQ products are viscous-elastic coatings and sealants for corrosion protection & waterproofing. VISCOTAQ is applied without primer or mess,
requires minimal surface preparation and forms a homologue, continuous protective coating. VISCOTAQ’S molecular chemistry is unique and designed in
such a way that the viscosity gives it permanent wetting characteristics, forcing the material to flow into the pores and anomalies of the substrate while the
elasticity of the product gives it the strength and feeling of a solid. VISCOTAQ always remains in a semi solid state. VISCOTAQ excels on areas such as soil-toair and coating transitions, girth welds, flanges, tank chimes & waterproofing for casing and vaults in addition to other applications. Address: 10624 Sentinel
Street, San Antonio, TX 78217. Tel: 210-514-1091. E-mail: [email protected]. Web site: amcorrusa.com.
ALS Oil & Gas
Booth # 507
2015
Sponsor
ALS Oil & Gas specializes in the latest technologies of pipeline fiber optic monitoring solutions. We are a global completions product and service provider
focusing on meeting our clients’ needs regarding pipeline leak detection, pipeline security, and pipeline strain sensing. Using state-of-the-art fiber optic
cabling and fiber interrogator units, ALS Oil & Gas’s PipeGuard system employs distributed temperature sensing (DTS), distributed acoustic sensing (DAS/
DVS), and distributed strain sensing (DSS) technologies. PipeGuard is able to pinpoint an integrity change from temperature, acoustic attenuation, or vibration
within a few meters, allowing you confidence in what section of the pipeline to respond to. Address: 950 S. Front St., Bellville, TX 77418. Tel: +1 832-755-2714.
E-mail: [email protected]. Web site: alsglobal.com.
American Innovations
Booth # 123
American Innovations’ industry-proven products and services help customers safely and efficiently manage critical operating equipment, including the
world’s pipeline infrastructure. AI’s solutions are used by virtually every oil and gas company in North America to gather and store information efficiently
and comply with regulations that protect people and the environment. Address: 12211 Technology Blvd., Austin, TX 78727. Tel: +1 512-249-3400.
E-mail: [email protected]. Web site: aiworldwide.com.
Booth # 242
BGL Asset Services is a premier corrosion control field service company founded in cathodic protection (CP) compliance. We specialize in preventative
maintenance-oriented assessment, monitoring, maintenance, design, and installation. Our CP systems protect onshore underground pipelines and
structures for oil and gas, manufacturing, and power generation facilities, underground HVAC pipelines, consumer service stations and related energy
facilities. Our core business is providing customers with diagnostic, preventative maintenance, mitigation services, and regulatory compliance programs. We
also provide any type of electrical survey, coating inspection, leak detection, ROW clearing, and atmospheric inspection and remediation service specializing
in mains attached to bridges. Address: 2193 Northway Dr., Mt. Pleasant, MI 48858. Tel: +1 989-772-8888. E-mail: [email protected]. Web site: bglas.com.
Brance-Krachy Co.
Booth # 208
2015
Sponsor
Since 1932, Brance-Krachy has been known as a world leader in the manufacturing and supply of a wide range of cathodic protection. In 2015, BranceKrachy has become integrated cathodic companies with the same commitment to quality and service from all our divisions while offering a broader range
of products and services. Come meet the new Brance-Krachy at booth #19040. Address: 4411 Navigation Blvd., Houston, TX 77011. Tel: +1 713-225-6661.
E-mail: [email protected]. Web site: brancekrachy.com.
Breim Engineering
Booth # 321
Brown Corrosion Services, Inc.
Booth # 211
AZZ Galvanizing
Brown Corrosion Services, Inc. is concerned with metal loss—corrosion and erosion. Our company was founded to specialize in material degradation and
corrosion/erosion control. We offer complete consult-ing, QA/QC, inspection, testing, expert witness, feasibility and design engineering, procurement, sales,
installation, startup, testing, training, and operation services for corrosion/erosion studies, corrosion/erosion control, monitoring systems, failures, cathodic
protection (CP), coatings, inhibition, material selection, and all other methods of corrosion/erosion control. Products include probes, coupons, acoustic sand
monitoring, anti-fouling equipment, hydrogen monitoring, and CP equipment including anodes, instruments, etc. Address: PO Box 940638, Houston, TX
77094. Tel: +1 832-327-0965. E-mail: [email protected]. Web site: browncorrosion.com.
Ballast Tools Equipment
Canusa–CPS
Booth # 346
Booth # 409
Ballast Tools Equipment (BTE) brings the perfect balance of performance and power to pipeline undercutting. With next generation safety features like
plastic guards on all facing surfaces and the ability to crawl and cut, our Pipeline Undercutter keeps crews out of the trench. Creating a flat working surface
to work under and beside the pipe, the BTE Pipeline Undercutter quickly gets the job done for the maximum ROI for you. Ballast Tools Equipment is an ISO
9001 Certified Company that designs and builds its products in the USA. See what some are calling the PERFECT balance of performance and power in
undercutters, at http://www.btepipelineundercutter.com. Address: 15 Goodwin Drive, Festus, MO 63028. Tel: 636-937-0505. E-mail: [email protected].
Web site: btepipelineundercutter.com/
Established in 1966, Canusa–CPS is the industry leader in field-applied coatings for corrosion, mechanical, and thermal protection of both onshore and
offshore pipelines. Our primary manufacturing facilities in Canada are supported by a network of warehousing and finishing locations throughout North
and South America, Europe, the Middle East, and Asia-Pacific. Recognized as a leader and an innovator, Canusa–CPS continues to deliver groundbreaking
technologies and services to the field-applied coatings industry. Among a diverse range of technologies to suit most coating applications, we provide the
world’s leading factory grade field-applied coating systems for 3LPE, 3LPP, and FBE-coated pipelines. Canusa–CPS continues to demonstrate its leadership
in pipeline corrosion coating technology development. Canusa–CPS product range: factory grade systems including GTS-PE and GTS-PP, automa-tion
technology including IntelliCOAT and atomizer gun and cartridge system, mechanical protection systems (rock shield type and fiberglass based), traditional
heat shrinkable systems, liquid applied coatings, insulated pipe coating systems, water pipeline products, coatings for directional drilling, visco-elastic
coatings, temporary cutback protection, and pipeline repair products. Address: 25 Bethridge Rd., Toronto, ON M9W 1M7, Canada. Tel: +1 416-744-5541.
E-mail: [email protected]. Web site: canusa.com.
Booth # 403
Baker Hughes PPS
Booth # 233
Baker Hughes offers industry-leading corrosion solutions and services to the hydrocarbon recovery, midstream transportation, and processing industries.
Baker Hughes innovations and knowledgeable experts add recognizable value throughout the hydrocarbon lifecycle from drilling, well stimulation, and
production, through pipeline transmission to refining and petrochemical manufacturing, and finished fuel additives. Address: 12645 W. Airport Blvd., Sugar
Land, TX 77478. Tel: +1 281- 276-5400. Web site: bakerhughes.com.
Bass Engineering Co.
Booth # 121
Bass Engineering offers a variety of cathodic protection (CP) services including design, installation, maintenance, annual inspections of CP systems, and
material sales to oil and gas pipelines and producers, petrochemical plants, electric power generation plants, pulp and paper mills, and municipalities. Bass
Engineering’s highly qualified staff includes NACE-certified engineers, technicians, and specialists with training and experience to assist our customers in
choosing the most effective application of CP technology. Our construction equipment is company owned and serviced for dependability on the job.
Materials can be ordered and picked up at our office or shipped to your location. Visit our Web site at bass-eng.com for further information or to order
materials. For over 40 years, Bass Engineering has been “The Reliable Name in Cathodic Protection.” Come visit with us at booth #11038. Address: 3200 Brent
Rd., PO Box 5609 (75608), Longview, TX 75604. Tel: +1 903-759-1633. E-mail: [email protected]. Web site: bass-eng.com.
13
BGL Asset Services, LLC
Carboline Co.
Booth # 323
2015
Sponsor
Carboline is a global manufacturer of high-performance coatings, linings, and fireproofing products. Solving customers’ problems is how we got our start
and after more than 65 years, it’s still our focus at Carboline. Our goal is to meet your needs and expectations by recommending products that provide the
right solutions. By doing this, we have become the global standard in quality for high-performance coatings, linings, and fireproofing products. Our focus on
performance, broad industrial market experience, continuous investment in long-term product development and testing, and our ability to meet challenges
anywhere in the world make us a source of coatings knowledge customers find invaluable. Our global manufacturing and sales structure allows us to service
all phases of construction projects globally. Put our expertise, experience, and know-how to work for you. Address: 2150 Schuetz Rd., St. Louis, MO 63146.
Tel: +1 314-644-1000. E-mail: [email protected]. Web site: carboline.com.
Cathodic Protection Management
Booth # 129
14
Cathodic Technology, Ltd.
Coastal Corrosion Control, Inc.
Cath-Tech has manufactured state-of-the-art instrumentation for corrosion professionals worldwide for over 30 years and will highlight the CorrReader,
a fully GPS synchronized handheld data logger for capturing critical cathodic protection data at test stations, valves risers, meters, tank bottoms, flanges,
custody transfer points, etc. Stop by for full details! Cath-Tech also manufactures the Hexcorder ECDA mobile pipeline integrity survey system so critical CIPS/
DCVG/GPS data may be seamlessly documented without the need for specialized software. A wide variety of GPS synchronized current interrupters is also
available ranging from 15 to 200 A. GPS synchronized stationary data loggers are available to monitor dynamic stray currents or telluric interference. See us
for complete pipeline integrity survey solutions! Address: 1 Marconi Ct., Ste. 15, Bolton, ON L7E 1E2, Canada. Tel: +1 905-857-1050. E-mail: [email protected].
Web site: cath-tech.com.
Coastal Corrosion Control, Inc., established in 1990, offers a full range of cathodic protection services. Since the start Coastal Corrosion Control, Inc. has grown
and developed into the Gulf South’s leading single source corrosion protection provider. Having both onshore and offshore capabilities, we offer foreign and
domestic services to a wide range of industries, including oil and gas exploration, production, transportation, petrochemical refineries, electric generation,
municipal, and governmental facilities. Addresses: 10172 Mammoth Ave., Baton Rouge, LA 70814. Tel: +1 225-275-6131. 2219 Sawdust Rd., Spring, TX 77380.
Tel: +1-832-616-3965. E-mail: [email protected]. Web site: coastalcorrosion.com.
Champion Corrosion Products, Inc.
Booth # 508
Booth # 247
Booth # 331
Booth # 217
2015
Sponsor
Champion Corrosion Products, Inc. has provided quality materials and customer service for over 10 years. Our goal is not to be the biggest but the best.
Address: PO Box 2094, Seguin, TX 78155. Tel: +1 830-303- 8505. E-mail: [email protected]. Web site: championcorrosion.com.
Chapman Engineering
Col-Met Engineered Finishing Solutions
With a history of excellence, Col-Met Engineered Finishing Solutions has emerged as a market leader in paint booths, powder booths, ovens, washers,
AMU’s, and other finishing system components for use in the industrial, automotive, truck and large equipment, and woodworking markets. Focusing on a
combination of impeccable customer service and product innovations, Col-Met has earned the respect and admiration of finishing applicators worldwide
who rely on the most authoritative source to service their needs. Our business is more than manufacturing quality products. We have united the most
brilliant and gifted engineers from the industry, a creative product innovation team, exceptional customer service experts and strong leaders who remain
committed to serving our distribution partners as they grow and their needs expand. Address: 1635 Innovation Dr., Rockwall, TX 75032. Tel: 888-452-6684.
E-mail: [email protected]. Web site: colmetsb.com.
Booth # 109
Chapman Engineering is a full service cathodic protection (CP) provider. With over 25 years of service, Chapman Engineering has the experience you will
need to design, install, and monitor your CP system. CP and corrosion engineering CP systems: design, installation, and testing; designs and specifications for
CP systems, based on site-specific testing data; installation of impressed-current CP systems; installation of galvanic anode CP systems; alternating currentinduced corrosion studies and mitigation plans; current demand studies; identification of corrosion mechanisms; ground/neutral system interconnection
diagnoses; corrosion surveys for existing infrastructure: oil and gas pipelines and facilities, refineries, and petrochemical facilities; water and wastewater
utilities; well casings CP system troubleshooting and repair coatings and CP specifications master meter operator systems; and CP surveys. Address: 213
Commerce Ave., Boerne, TX 78006. Tel: +1 361-585-7019. E-mail: [email protected]. Web site: chapmanengr.com.
CHLOR*RID International, Inc.
Booth # 304
CHLOR*RID International, Inc. is the world leader in soluble salt information, education, test and detection devices, and decontamination products. Featured
at our exhibit will be our surface salt test kits designed for accurate and easy field detection and our line of liquids to remove soluble salts and prevent flash
rusting. Address: PO Box 908, Chandler, AZ 85244. Tel: 1 800-422-3217. E-mail: [email protected]. Web site: chlor-rid.com.
Citadel Technologies
Booth # 134
Citadel Technologies has been headquartered in Tulsa, Oklahoma since 1993 and is the developer and manufacturer of carbon composite repair systems.
Our products include DIAMONDWRAP®, BLACKDIA-MOND®, DIAMONDWRAP® HP™, DIAMONDWRAP® SUBSEA™, RHINOWRAP®, and the SLS-SERIES™ of
primers and coatings. They are the most extensively tested products on the market and have been installed in over 45 countries. As the best alternative to
clamps and replacement, our products of carbon fiber and 100% solid epoxies are used to rehabilitate and restore original strength to damaged, corroded
and eroded pipelines and pipe systems. Our SLS-SERIES™ of coating system provides protection of surfaces for corrosion, erosion and harsh environments.
Citadel Technologies has developed fiberglass systems DIAMACORR™, DIAMASHIELD™, and DIAMASHOE™ to complement its carbon systems and provide
corrosion and abrasion protection to new pipelines and pipe supports. Address: 6430 S. 39th W. Ave., Tulsa, OK 74132. Tel: +1 918-584-2220. E-mail: tmally@
cittech.com. Web site: cittech.com.
Clean Harbors Industrial Services
Booth # 332
Clemco Industries Corp.
Booth # 221
2015
Sponsor
Clemco is an industry leader in surface preparation equipment ranging from portable blast machines to specialty blast accessories. Our products include
pipe cleaning/coating equipment, blast-operator safety equipment, abrasive recovery systems, portable dust collection, and dehumidification equipment.
In addition, we design and build blast cabinets, blast rooms, and automated systems. Address: One Cable Car Dr., Washington, MO 63090. Tel: +1 636-2394300. E-mail: [email protected]. Web site: clemcoindustries.com.
15
Corrpro Companies, Inc.
Booth # 328
2015
Sponsor
Corrpro is the complete corrosion protection source for various structures worldwide. With dedicated corrosion control professionals, state-of-the-art
research and testing laboratories, and production facilities, we offer innovative, cost-effective, and long-term solutions for preserving assets through
corrosion control. We are committed to rigorous engineering and design procedures, advanced research, and proper application of products and services
aimed at preserving piping, equipment, and infrastructure in diverse industries and environments. Our services allow institutions to stop the corrosion of
metallic structures and prevent or substantially delay the vastly higher expenditures required to replace deteriorated and unsafe structures. Address: 7000 B
Hollister Rd., Houston, TX 77040. Tel: 1 866-CORRPRO. E-mail: [email protected]. Web site: corrpro.com.
CP Masters, Inc.
Booth # 320
Cathodic protection (CP) engineering, installation, monitoring, repair, and corrosion control materials. Get lasting CP solutions with CP Masters, Inc.’s NCCERcertified engineering, materials, design, installation, and training. CP Master’s team of highly trained corrosion engineers and technicians provide a wide diversity
of experience in corrosion control. Our knowledgeable staff is accredited by NACE in a wide spectrum of certifications ranging from corrosion technicians
to corrosion specialists. Our expertise is based on CP Masters intense involvement in designing, installing, commissioning, monitoring, and maintaining CP
and AC mitigation systems. This includes corrosion control and mitigation systems for petrochemical plants, power plants, fuel storage terminals, tank farms,
well casings, and pipelines around the world. Address: 1700 E. Seward Rd., Guthrie, OK 73044. Tel: +1 405-657-7948. E-mail: [email protected].
Web site: cpmasters.com.
Dairyland Electrical Industries, Inc.
Booth # 206
Dairyland Electrical Industries is the world’s leading manufacturer of solid-state decoupling products commonly used to isolate cathodically protected
structures from grounding systems or other equipment while also providing safety grounding for AC fault current and lightning. Industry standard products
such as the PCR, SSD, OVP, and OVP2 have been applied to a wide variety of applications including insulated joint protection, decoupling electric equipment
grounding systems, and induced AC voltage mitigation. Adding to our list of product certifications and listings, Dairyland has recently achieved IECEx and
ATEX certifications for Class 1, Division 1 and 2 products. Our latest certifications, along with our company’s ISO 9001:2008 certification, position Dairyland to
continue delivering the exceptional product quality and service our customers around the world have come to expect. Address: PO Box 187, Stoughton, WI
53589. Tel: +1 608-877-9900. E-mail: marketing@ dairyland.com. Web site: dairyland.com.
DeFelsko Corp.
Booth # 108
The award winning PosiTector gage accepts all coating thickness (6000/200), environmental (DPM), surface profile (SPG/RTR), and ultrasonic wall thickness
(UTG) probes. This innovation allows quick and easy conversion from a coating thickness gage to a surface profile gage, dew point meter, or ultrasonic wall
thickness gage with a simple probe change. Each probe retains its own unique calibration information allowing for full probe interchangeability. Long form
certificates of calibration are included with each probe. Available as either standard or advanced, all models feature built-in memory, onscreen statistics and
PosiSoft USB drive. Advanced models also include color LCD, onscreen graphing, and more. Address: 802 Proctor Ave., Ogdensburg, NY 13669- 2205. Tel: +1
315-393-4450. E-mail: [email protected]. Web site: defelsko.com.
16
Denso North America
Energy Economics, Inc.
Denso North America is a subsidiary of Winn & Coales International. In business since 1883 and a leading manufacturer of anticorrosion products.
Products include Denso petrolatum tapes, primers, mastics, Protal pipeline liquid epoxies, Denso bitumen and butyl tapes, hot-applied tapes, a full line
of SeaShield marine pile protection systems, and Archco tank linings and coatings. Address: 9747 Whithorn Dr., Houston, TX 77095. Tel: +1 281-821-3355.
E-mail: [email protected]. Web site: densona.com.
Energy Economics is a full-service cathodic protection company. Established in 1975, EEI specializes in all types of groundbed construction, from deep anode
systems to distributed anode impressed current groundbeds. Our personnel are NACE certified and meet the operator qualification criteria of our customers.
EEI is also a magnesium anode manufacturer shipping to all destinations in the United States. Address: 109 S. St. S.E., Dodge Center, MN 55304. Tel: 1 800733-2557 or +1 612-801-2004. Fax: +1 763-427-2809. E-mail: [email protected]. Web site: eei.com.
Dixie Testing and Products, Inc.
EnhanceCo, Inc.
Booth # 135
Booth # 241
Booth # 245
2015
Sponsor
Dixie Testing and Products, Inc. is an independent testing laboratory. We offer a broad range of analytical and functional testing as well as corrosion
monitoring supplies and bacteria vials/test kits. Our testing capabilities include complete water analysis, soil/solids testing, high temperature/high pressure
performance testing, autoclave, rocker arm, pour point, biocide studies, and more. Our company has over 30 years experience serving the oil and gas industry
and we pride ourselves on individualized customer service. Address: 9723 Honeywell, Houston, TX 77074. Tel: +1 713-270-7353. E-mail: [email protected].
Web site: dixietesting.com.
Booth # 235
Booth # 215
Elcometer is a leader in coating and concrete inspection equipment, rebar, and metal detection. Our products measure coating thickness, climate, porosity,
and adhesion, as well as a wide range of physical test parameters required for the formulation of coatings. For information on our full range of products visit
our Web site: elcometerusa.com. Address: 1893 Rochester Industrial Dr., Rochester Hills, MI 48309. Tel: 1 800-521-0635. E-mail: sales@ elcometerusa.com.
Web site: elcometer.com.
Booth # 105
2015
Sponsor
The Elecsys Corp. manufactures and operates the Pipeline Watchdog remote monitoring system. The Pipeline Watchdog system is a comprehensive, Webbased, turnkey, M2M solution for delivering critical operational field data to the desktop for the oil, gas, irrigation, water/wastewater, and similar industries.
Elecsys Corp. is committed to “connecting industry,” giving our customers the most reliable asset monitoring systems available for deployment in remote
and difficult field conditions anywhere in the world. The Elecsys Corp. is the leading innovator in remote monitoring solutions for cathodic protection
systems, oil and gas well sites, gas distribution systems, and Web-based SCADA applications. Address: 846 N. Martway Ct., Olathe, KS 66061-7065. Tel: +1
913-647-0158. E-mail: sales@elecsyscorp. com. Web site: elecsyscorp.com.
Element Materials Technology
Booth # 223
Element is a company with a global presence; its laboratories are staffed by experts specializing in materials testing, product qualification testing, and failure
analysis for the aerospace, oil and gas and transportation and industrials sectors. Address: 14805 Yorktown Plaza Dr., Houston, TX 77040. Tel: +1 713-6966382. E-mail: [email protected]. Web site: element. com.
EN Engineering, LLC
Booth # 222
EN Engineering (ENE), Integrity Services—A business unit of ENE focusing on integrity, corrosion control, and metallurgical services for the gas, oil, and water
industries, ENE has expertise in pipeline integrity management, internal corrosion monitoring and risk assessment, direct assessment process and procedures,
project management and specification for welding procedures, ECDA, ICDA, SCCDA, metallurgy, and SCC cracking, applied mechanics, failure analysis,
fitness for service assessments, wall loss assessment, data evaluation and management, corrosion control design, AC threat assessment and mitigation, DC
stray current assessment/mitigation, and cathodic protection monitoring, design, and survey. Address: 28100 Torch Pkwy., Ste. 400, Warrenville, IL 60555. Tel:
+1 630-353-4110. E-mail: [email protected]. Web site: enengineering.com.
Enduro Pipeline Services, Inc.
Booth # 122 & 124
Enduro is a “vertically integrated” manufacturer/supplier of all types of pipeline scrapers—metal body (can be rebuilt), uni-body (all urethane), uni-directional
and bi-directional applications—that clean and maintain pipe internal surfaces. A complete line of attachments accomplishes all liquid and gas pigging
applications: MFL Combo Tool—ILI services for online, offline applications plus new construction caliper survey services during construction or rehabilitation
of pipelines; advanced analysis software for all ILI surveys; GIS location for all pipeline features and anomalies; project management—cleaning services,
mechanical, and liquid plus cleaning pig types—recommendations and custom design/manufacture for specialty applications; pig tracking services and
GPS data collection/GIS service. ‘Pig Popper’—pig passage indicator—manual reset, electrical wired to control panel; plus buried pipe locations. View
demos in the booth. Enduro PigProgII Presenter Software. Address: 5002 S. 45th W. Ave., Tulsa, OK 74107. Tel: +1 918-446-1934. E-mail: [email protected].
Web site: enduropls.com.
17
EnhanceCo is an independent company providing internal corrosion expertise worldwide. Our experienced, multi-disciplinary team provides totally
independent third party surveys, field reviews, corrosion control programs, customized monitoring equipment and the services you need to operate
safely and economically. Address: 2714 Cypress Point, Suite E, Missouri City, TX 77459, Tel: 281-499-4426, E-mail: [email protected], [email protected],
[email protected]. Web site: enhanceco.net
Farwest Corrosion Control Co.
Elcometer, Inc.
Elecsys Corp.
Booth # 232
2015
Sponsor
For more than 58 years, since 1956, Farwest has been a leading provider of cathodic protection (CP) services and materials for a wide variety of industries,
including oil and gas, pipelines and tanks, marine, nuclear, water, and wastewater systems. Our pipeline materials division (formally Corrosion Control Products
Co.) is the largest supplier of corrosion control products in the world and many of our eight regional locations across the United States provide installation
and engineering services. Together, with our eight warehouse locations, we offer you the type of complete CP and corrosion control solutions that no
other company can. Check out our new Web site, farwestcorrosion.com; it is the largest corrosion-related site in the world and contains over 1,000 pages of
products, instructions, videos, printable MSDS sheets and much, much more. Address: 12029 Regentview Ave., Downey, CA 90241-5517. Tel: +1 310-532-9524.
E-mail: [email protected]. Web site: farwestcorrosion.com.
Fischer Technology, Inc.
Booth # 313
Coating thickness measurement is an important factor in the paint and corrosion industry. Fischer provides specific solutions for the precise measurement of
corrosion protection coatings according to international standards IMO PSPC and SSPC-PA2. This year, Fischer is introducing the DUALSCOPE® CM-Module,
an all-in-one instrument for measuring surface profile, soluble salt, environmental conditions, coating thickness; and the Fischer Data Center software
expands the functionality of our instruments with immediate evaluation of measurement results and a quick overview of the process. Fischer Technology is
a U.S. manufacturer of coating thickness, material testing, nanoindentation, and material analysis instrumentation. Address: 750 Marshall Phelps Rd., Windsor,
CT 06095. Tel: +1 860-683-0781. E-mail: [email protected]. Web site: fischer-technology.com.
Galvotec Companies
Booth # 234
2015
Sponsor
As a world-recognized leader in the cathodic protection (CP) industry, Galvotec has been providing high-quality aluminum, zinc, and magnesium anodes
to the oil and gas industry for 31 years. Galvotec’s production facility is ISO 9001-certified and specializes in galvanic anodes for both new construction
and replacement applications. Galvotec offers both the exclusive impressed current Lockheed-Galvotec Vertical Tension Anode system and the innovative
retrofit anode assemblies for extending the life of existing offshore structures. The company also provides CP engineering for both onshore and offshore
systems worldwide. Address: 6712 S. 36th St., McAllen, TX 78503. Tel: +1 504-362-7776. E-mail: [email protected]. Web site: galvotec.com.
General Corrosion Corporation
Booth # 301
Glas Mesh Co.
Booth # 231
GMA Garnet Group
Booth # 324
GMA Garnet Group is the leading producer of industrial garnet for the blast-cleaning and surface preparation industry, with advanced mining and
processing operations established within Western Australia and strategically located distribution warehouses worldwide. The group has also pioneered the
operation of large-scale garnet recycling facilities in Italy, Saudi Arabia, United Arab Emirates, and Louisiana, offering an environmentally friendly solution to
the disposal of used garnet. Address: 1800 Hughes Landing, Ste. 350, The Woodlands, TX 77380. Tel: +1 832- 243-9300. E-mail: [email protected].
Web site: garnetsales.com.
18
IRT Integrated Rectifier Technologies, Inc.
KTA-Tator, Inc.
IRT is a leading manufacturer of cathodic protection (CP) transformer rectifiers and junction panels and has been servicing a wide variety of CP clients and
applications internationally since 2001. We offer stan-dard product models for basic CP applications and also work with clients to develop custom product
solutions for special applications (critical control, CP interference, harsh environments, offshore platforms, etc.). All of our CP rectifiers are designed and
manufactured with quality, reliability, safety, and practicality in mind and all are supplied with electrical approval from CSA or ETL (C/US certification and/or
special approval, depending on custom client requirements). We often supply and factory install related products as well, such as remote monitoring devices
and GPS interrupters, which can reduce client field service costs substantially. We look forward to working with you to find the best product solution for your
requirements. Address: 15360-116 Ave., Edmonton, AB T5M 3Z6, Canada. Tel: +1 780-447-1114. E-mail: sales@ irtrectifier.com. Web site: irtrectifier.com.
KTA-Tator, Inc. (KTA) is a consulting engineering firm founded in 1949. KTA provides comprehensive coatings consulting services including condition
assessments, failure analysis, specification development, laboratory analysis and performance testing, and various training courses. KTA offers QA/QC
inspection services utilizing an 80+ NACE/SSPC-certified inspection staff. KTA provides steel and concrete fabri-cation inspection services utilizing a 50+
CWI/NDT/PCI-certified staff. KTA offers coatings-related health and safety services provided by CIH/ CSP-credentialed staff. KTA distributes inspection gages
and supplies, representing over 60 manufacturers. An independent and unbiased philosophy has permitted KTA to provide expert professional services to
its clients for over 60 years. Address: 115 Technology Dr., Pittsburgh, PA 15275. Tel: +1 412-788-1300. E-mail: [email protected]. Web site: kta.com.
Booth # 136
Jotun Paints, Inc.
Booth # 602
At Jotun, we protect property by providing solutions that not only enhance the appearance of your asset but also ensure long-lasting durability. Our range
of paints and coatings are inspired by technology, designed to meet the latest industry standards, and developed with sustainability in mind. Our specialties
include premium decorative paints for long-lasting and beautiful finishes, and coatings for corrosion and fouling protection of metal substrates and passive
fire protection of steel. For more than 30 years, Jotun has supplied coatings and services that extend the life, operational performance, and flow assurance
in plants, terminals, offshore structures, pipelines, global marine fleets, ports, and harbors. Address: 842 W. Sam Houston Pkwy. N., City Center Three, Ste. 300,
Houston, TX 77024. Tel: 1 800-229-3538. E-mail: dave. [email protected]. Web site: jotun.com.
JW’s Pipeline Integrity Services
Booth # 220
JW’s Pipeline Integrity Services began as a consulting and field services company specializing in pipeline integrity in 2004. Jim Walton, the owner, founder,
and president, has over 20 years’ experience in the industry. Our field services include external corrosion direct assessment (ECDA), internal corrosion
direct assessment (ICDA), stress corrosion cracking direct assessment (SCCDA), locating, depth of cover and current attenuation survey, alternating current
voltage gradient surveys, close interval surveys, direct current voltage gradient surveys, soil resistivity surveys, short locating surveys, stray current mapping
surveys, GPS surveys, bell hole examinations, and more. Allow us to complete some of your pipeline integrity work and you will have found a partner for
life once you experience our quality and attention to detail. You will also appreciate that over a third of our staff is former military and we continue to hire
and employ more veterans. Address: 12901 Nicholson Rd., Ste. 240, Farmers Branch, TX 75234. Tel: +1 917-755- 2633. E-mail: [email protected].
Web site: jwspiservices.com.
Kantex Industries, Inc.
Booth # 202
Since 1991, Kantex Companies has provided the hardest working crews and is the leader in cathodic protection installation by air/hydro excavation. Address:
1320 S. Hamilton Cir., Olathe, KS 66051. Tel: 1 800-530- 5570. E-mail: [email protected]. Web site: kantex.com.
King Innovation
Booth # 343
LORESCO, Inc.
Booth # 322
LORESCO® manufactures impressed current anode backfill for all field conditions. LORESCO® SC-3® is designed specifically for demanding anode systems.
LORESCO® meets all standards for impressed current anode backfill. SC-3® and RS.3® carry an NSF certification. Other LORESCO® products are replaceable
deep anode systems, AllVent™, and PermaPlug™. These products represent the finest innovations available for the deep-anode cathodic protection industry.
For quality service and price, specify LORESCO®. Address: 421 J.M. Tatum Industrial Park Dr., Hattiesburg, MS 39401. Tel: +1 601-544-7490. E-mail: info@
loresco. com. Web site: loresco.com.
MATCOR, Inc.
Booth # 318
Experts in corrosion prevention for forty years, MATCOR engineers, manufactures, installs, commissions, and maintains a proven range of high value, turnkey,
proprietary cathodic protection (CP), and AC mitigation systems worldwide for the oil and gas, power, water/wastewater, and other infrastructure industries.
Manufactured in MATCOR’s USA, ISO 9001:2008-certified facility, CP products include linear impressed current anodes, deep anodes and systems, probe anodes,
marine/water anodes, AC mitigation systems, reference electrodes, and sacrificial anodes. MATCOR’s corrosion engineering, project management, installation,
testing, and maintenance services protect the world’s infrastructure from corrosion. Address: 101 Liberty Ln., Chalfont, PA 18914. Tel: +1 215-348-2974.
E-mail: matcorsales@ matcor.com. Web site: matcor.com.
McDonald Service Enterprises, LLC
Booth # 334
2015
Sponsor
Mears Group
Booth # 308
For more than 40 years, Mears Integrity Solutions has created proven time and financial efficiencies for pipeline operators through our prevention,
inspection, and remediation services. Our philosophy is to provide a single point of contact and responsibility by providing turnkey engineering, technical,
and construction services. Mears’ Integrity Solutions Division offers turnkey corrosion control and pipeline integrity services including cathodic protection,
inline inspection, AC mitigation, ECDA, SCCDA and ICDA direct assessment, NDT inspection, corrosion engineering, repairs, and coating reconditioning,
plus much more. Address: 4500 North Mission Rd., Rosebush, MI 48878. Tel: 1 844-802- 4195 or +1 832-634-2800. E-mail: [email protected].
Web site: mears.net.
King Innovation specializes in the development, design, and manufacture of innovative products to meet customer needs. The DryConn® line of
waterproof connectors for gas line tracer wire has been trusted in the industry for over 25 years. King is committed to the core values of our business. To
find out why visit kinginnovation.com. Address: 42 N. Central Dr., O’Fallon, MO 63366. Tel: 1 800-633-0232. E-mail: [email protected].
Web site: kinginnovation.com.
Mercer Technical Services
KnightHawk Materials Lab
Mercer Technical Services provides full project support to meet your needs including staffing projects, project management, records research, field
engineering, design, installation, full field testing and comprehensive documentation for the pipeline industry. Our staff is comprised of employees with
years of field experience, Operator Qualifications and NACE Certifications for all aspects and ready to meet your requirements. Combined with our other
Quanta Services companies, we are able to provide a broad range of services from small surveys to EPC projects. Address: 8826 Santa Fe Dr., Suite 150,
Overland Park, KS 66212. Tel: 913-383-2407. E-mail: [email protected].
Booth # 210
KnightHawk Engineering Materials Lab (KML) successfully obtained accreditation to the ISO/IEC 17025:2005 standard late last year. Accreditation to this
international standard indicates KML operates under a management system for quality, administrative, and technical operations that also meets the
principles of ISO 9001, with demonstrated competency in several ASTM test methods. Our accredited scope of testing includes Hardness (Rockwell B
and C, Vickers Micro and Macro Hardness), tensile testing, energy dispersive spectroscopy, corrosion rates, and micro-etching. While these accredited test
methods represent a major component of the testing we conduct, KML also specializes in development and execution of customized testing to satisfy
client-specific needs. We have experience in developing and conducting tests that range from long-term high-pressure and high-temperature corrosion
testing to screen reactor materials, creep testing of clad wiring, torsion testing of large equipment bolts, to tests designed to simulate operating loads and
conditions experienced by components. Address: 17625 El Camino Real, Ste. 412, Houston, TX 77058. Tel: +1 281-282-9200. E-mail: [email protected].
Web site: knighthawklab.com.
19
Booth # 244
Booth # 132
MESA
Booth # 204
2015
Sponsor
MESA is the industry-leading provider of full-service corrosion control solutions, including materials, design, engineering, installation, and technical
maintenance. We offer a full line of CP materials and test equipment, anode manufacturing (impressed and galvanic), CP systems for conventional and deep
well, and specialize in custom directionally drilled ground beds, well casings, and linear anode installations. We are the exclusive distributor/applicator of
Cortec CorroLogic™ corrosion inhibitor systems for tank floors, roofs, and pontoons. MESA’s integrity personnel will address and assist you in controlling the
factors that contribute to system failure, providing cased crossing solutions, ECDA, DCVG, ACVG, GPS, CIS, PCM, ICDA, and SCCA surveys and assessments. MESA
is a two-time winner of the Malcolm Baldrige National Quality Award and is ISO 9001:2008-certified. Address: PO Box 52608, Tulsa, OK 74152. Regional Offices:
Houston, Ft. Worth, Huntington Beach, Tallahassee, Ohio, South Carolina, and Seattle. Tel: 1 888- 800-MESA (6372) or +1 918-627-3188. Fax: +1 918-627-2676.
E-mail: [email protected]. Web site: mesaproducts.com.
20
Metal Samples
North American Survey Corp.
Metal Samples offers a full range of corrosion monitoring systems, including access fittings for high-pressure/temperature systems to insert and retrieve
probes, chemical injection systems, quills, and nozzles. Probes include ER, LPR, erosion, hydrogen, biological, and custom. Corrosion instruments include
portable meters, transmitters, and data loggers. Other products include corrosion test coupons, holders, insertion systems, and test racks. Laser cladding
and manufacturing services are also available. Address: 152 Metal Samples Rd., Munford, AL 36268. Tel: +1 256-358- 4202. E-mail: [email protected].
Web site: metalsamples.com.
We are a cathodic protection (CP) testing and monitoring company, in business since 1990. During our 25 years of service, we have performed a variety of
CP surveys on over 85,000 miles of pipeline throughout North America. Clients choose us because of our honesty, integrity, and ability to provide accurate
data on a timely and reliable basis. Our specialty is close interval survey (CIS), but we also perform various other over-the-pipe surveys including direct current
voltage gradient (DCVG), alternating current voltage gradient (ACVG), cell-to-cell (Hot Spot), PCM (current attenuation), soil resistivity, depth-of-cover, pipe
locating, sub-meter GPS data aollection (DGPS), leak detection, right-of-way assessment, and encroachment. We are members of NACE, ISNetWorld, Energy
Worldnet, Veriforce, NCCER, as well as being an accredited NCCER training and assessment facility. We hope this short summary of our company will
encourage you to consider North American Survey Corp. for your integrity assessment needs. Address: 5904 Spring Stuebner Rd., Ste. F, Spring, TX 77389. Tel:
+1 281-228-7460. E-mail: [email protected]. Web site: nascorp.biz.
Booth # 302
Booth # 225
Miliken Pipe Wrap, Inc.
Booth # 314
corTalk by Mobiltex Technologies, Inc.
Booth # 216
Mobiltex provides industry-leading products for cathodic monitoring and interruption control through its CORTALK product suite. Our product line includes
fixed and portable interrupters, data loggers for both rectifiers and coupons, remote monitoring units (RMUs), and Web hosting for a turnkey solution to
your cathodic monitoring requirements. Our RMU products have been designed to accommodate different budget requirements, from low-cost monitoring
solutions and data logging, to more sophisticated expandable monitoring and synchronized interrupt control systems. The Mobiltex RMU1 is a new product
designed especially for economical wireless remote monitoring of test points. Address: 3640 26 St. N.E., Calgary, AB T1Y 4T7, Canada. Tel: +1 403- 291-2770.
E-mail: [email protected]. Web site: cortalk.com.
NRI-Neptune Research, Inc.
Booth # 319
NRI has revolutionized and led the industry in research and development, engineering design, and manufacturing of pre-impregnated and field saturated
composite strengthening systems that restore, protect, and reinforce pipes, pipelines, and civil structures for over 31 years. NRI has changed the future of
composites. It has been established on a foundation known for cutting edge solutions, unparalleled customer support, and high strength, quality products
that have stood the test of time and environmental elements. Our extensive product portfolio serves a broad range of markets. NRI is distinguished as the
industry’s premier manufacturer of composite reinforcement solutions. Address: 3875 Fiscal Ct., Ste. #100, Riviera Beach, FL 33404. Tel: +1 561-683-6992.
E-mail: [email protected]. Web site: neptuneresearch.com.
Pacific Sensor
Montipower, Inc.
Booth # 340
Booth # 209
Montipower, Inc. will showcase the Bristle Blaster, the only handheld power tool that will both clean and profile steel surfaces. The Bristle Blaster removes
corrosion, mill scale, and coatings while creating a 2.7- to 3.3-mil surface profile and near-white/white metal appearance. Lightweight pneumatic and
electric tools are ideally suited for spot repairs or jobs where other methods are costly or prohibited. As the master importer and distributor for the Bristle
Blaster and other specialized products, we are proud to offer same day shipping for tools, consumables, and spares, as well as on-site training and technical
support to our customers throughout North America. Address: 7677 Coppermine Dr., Manassas, VA 20109. Tel: 1 877-629-8777. E-mail: info@mbxit. com.
Web site: mbxit.com.
MSES Corrosion Products Division
Booth # 239
2015
Sponsor
MSES Consultants, Inc. (MSES) has been a provider of quality professional services to the natural gas industry since our establishment in March 1976. What you
may not realize is in 1995, MSES began devel-oping and field testing numerous test methods, field test kits, products, and equipment for the evaluation of
external and internal corrosion, with the objective of allowing corrosion professionals to more accurately and efficiently conduct their corrosion assessments.
MSES Corrosion Products Division provides a full line of test kits, coupons, equipment, products, and services for corrosion monitoring; ICDA, ECDA, and
CIS survey accessories; and APB, SRB, and MIC testing. Address: 609 W. Main St., Clarksburg, WV 26301. Tel: +1 304-624-9700. E-mail: j.rine@ msesinc.com.
Web site: msesproducts.com.
Multi-Chem
Booth # 117
2015
Sponsor
Multi-Chem, a Halliburton Service, provides unparalleled expertise and superior local service to the oil and gas industry through the cost-effective
application of customized specialty chemicals. Our innovative solutions are designed to meet the complex challenges associated with completion,
production, and pipeline transportation of oil and gas. As a Halliburton Service, we offer you an integrated approach that is tailored to your needs from
well design through production. Address: 3000 N. Sam Houston Pkwy. E., Houston, TX 77032. Tel: +1 281-871- 2141. E-mail: [email protected].
Web site: halliburton.com/ multichem.
NALCO Champion
Booth # 240
Nalco Champion, an Ecolab Co., provides safe, sustainable specialty chemistry programs and services to upstream and midstream oil and gas, refining, and
petrochemical operations. As a zero-harm organization, we are committed to achieving Goal Zero: 100% safety for all who interact with our products and services
at all times. Through on-site problem solving and the application of innovative technologies, we help our customers maximize production, optimize water
use, and overcome complex challenges in the world’s toughest energy frontiers. We back every solution with a secure global supply chain: 50 manufacturing
facilities, 13 technology centers, and 6,700+ employees in 160+ countries. Learn more at nalcochampion.com. Address: 3200 S.W. Fwy., Houston, TX 77027.
Tel: +1 713-627-3303. Web site: nalcochampion.com.
21
Pigs Unlimited International, Inc.
Booth # 408
The Unlimited side of Pigs Unlimited—Pigs Unlimited International, Inc.—has been a trusted manufacturer of pipeline pigs for over 20 years, but as our
“unlimited” name suggests, we offer much more. Stop by our booth to check out our full line of innovative pigging products, which includes several styles of
closures, launcher/receivers, pig detectors, revolutionary transmitters, and receivers, as well as our new disposable transmitters taking the industry by storm,
featuring industry leading run-time and a completely sealed body all at a fraction of the price. Address: 23802 FM 2978, Ste. C1, Tomball, TX 77375. Tel: +1
281- 351-2749. E-mail: [email protected]. Web site: pigsunlimited. com.
Piping and Corrosion Specialties, Inc.
Booth # 229
PK Technology
Booth # 337
2015
Sponsor
PK Technology designs mobile solutions that resolve the complex issues in the oil, gas, and petrochemical industries. That’s our strength— whether
integrating with an established system or starting a new one, our mobile solutions provide efficient and effective ways of managing tasks...but in the best
of means possible. Robust, intuitive, and user friendly, we stand to lead the industry with our solutions. PK Technology will be featuring intelliSPEC™—the
dynamic, first to market, and truly mobile inspection technology built specifically for the OG&E and petrochemical industries by real-world industry leaders.
The patent-pending technologies and features outperform all other “e-form” programs for convenience, ease of use, cost savings, efficiency, accuracy, and
reliability. This inclusive system of data collection and management is the leader in establishing how modern inspection, reporting, trending, and planning
can be used for corrosion and coating compliance assessment. Address: 10811 E. Harry St., Wichita, KS 67207. Tel: 1 855-759-2800. E-mail: [email protected].
Web site: pktechnology.com.
Polygon
Booth # 406
Polyguard Products, Inc.
Booth # 224
2015
Sponsor
Polyguard Products offers innovative corrosion coatings: the RD-6 pipeline coating system. Except for FBE, RD-6 is one of the world’s oldest (1988)
and largest-selling non-shielding coating system. The RG series of reactive gels for corrosion under insulation is one of the only effective solutions to
CUI that is easy, safe, and environmentally benign. IRO abrasion-resistant outerwrap is for bored or drilled applications; NHT-5600 2-part epoxy is
for girth welds, fittings, and rehabilitation. Address: 3801 S. I 45, Ennis, TX 75119. Tel: +1 214-515-5000. E-mail: [email protected].
Web site: polyguardproducts.com.
22
PPG P&MC
Rosen USA
PPG Protective & Marine Coatings’ decades of experience in the world’s most challenging conditions has enabled us to develop a complete range of proven
coating solutions that will aid in the protection of our customers’ assets in various segments. With complete product compatibility from start to finish, PPG
PMC products will provide an unparalleled increase in operational and cost-efficiency. Address: One PPG Pl., Pittsburgh, PA 15272. Tel: +1 412-434-3082.
E-mail: [email protected]. Web site: ppgpmc.com.
ROSEN is a privately owned company, serving the oil and gas industry with inspection, integrity, and rehabilitation products and services. Operating
in over 100 countries, ROSEN provides the industry with advanced inspection and integrity solutions to ensure safe and economical operation of a
wide range of assets and facilities. Address: 14120 Interdrive E., Houston, TX 77032. Tel: +1 281-442-8282. E-mail: [email protected].
Web site: rosen-group.com.
Protech EIS
R.U.S.T. Reliable Underground Service Technicians
Booth # 347
Booth # 103
Booth # 218
2015
Sponsor
Protech EIS is a pipeline service company formed by a team of individuals that have been in the pipeline industry for more than 40 years. The partners at
Protech have been the people out in the field with experience in pipeline integrity, pipeline construction, and inspection. We are a full service provider
of cathodic protection services including system design, installation, and maintenance. Protech provides the most experienced personnel available,
maintaining a staff of NACE-certified Technicians, Technologists, and Corrosion Specialists. Address: PO Box 778, Hardinsburg, KY 40143. Tel: +1 270-580-7233.
E-mail: tylerburdette@ protecheis.com. Web site: protecheis.com.
Raven Lining Systems
Booth # 338
RAM-100 International, LLC
Booth # 402
For over 30 years, RAM-100 has been providing solutions to corrosion problems for the oil and gas industry. We manufacture anticorrosive coating, and
composite and steel repair sleeves for pipelines. Our manufacturing processes are ISO 9000 certified and comply with industry standards such as ISO
24.817, PCC/2, ASME, ASTM, and API, as well as DOT and other private and local regulations. Our anticorrosive coating can be applied manually or with
an aspersion gun. Our composite and Type A and Type B steel sleeves have been certified as permanent repairs to be installed in operating pipelines.
Our products include: RAM- 100® and RAM-100 PLUS SP® coatings for mechanical and corrosion protection for pipelines and other installations; RAMFILL®
(PLUS NM, MC, RS, B+RE) composite and steel sleeves for pipeline repair of corrosion, nonleaking flaws, and other integrity deficiencies; and RAMFILL®
(B+RE) special-design, custom-made, boiler-type steel sleeves for leaking or nonleaking accessories, cracks, dents, illegal taps, and other major integrity
deficiencies or special needs. Address: 4822 N. Sam Houston Pkwy., W., Ste. 100, Houston, TX 77086. Tel: +1 832-917-1770. E-mail: [email protected].
Web site: RAM100intl.com.
REOD, LLC
Booth # 317
2015
Sponsor
REOD provides third-party coating, lining, brick/tile, and fireproofing inspection services to various industries with special skills in plural component pump
applications and applications over concrete. REOD also offers failure analysis and legal consultation from a licensed attorney. Address: 620 St. Brendan,
Florissant, MO 63031. Tel: 314-831-3800. E-mail: [email protected]. Web site: reodllc.com.
RK&K
Booth # 207
RK&K’s Energy and Corrosion team specializes in AC Modeling and mitigation, horizontal directional drilling and Cathodic protection engineering. RK&K
maintains an experienced staff for our engineers and technicians specializing in energy and corrosion. Our staff includes registered professional engineers,
NACE certified specialists, technologists, and technicians. Put RK&K’s experienced staff of energy professionals to work for you today. Address: 14505
Briarhills Parkway Suite 100, Houston, TX 77077. Tel: 832-243-1035. E-mail: [email protected]. Web site: rkk.com.
Rohrback Cosasco Systems, Inc.
Booth # 503
RCS is the world leader in corrosion monitoring and chemical injection management systems. RCS has provided leading-edge corrosion control solutions
for such diverse industries as oil and gas, petrochemical, water treatment, chemical, pulp and paper, pharmaceutical, and utilities. On exhibit will be our new
remote monitoring unit, bluetooth suite of dataloggers and portable instrument, magnetic retriever, and recent developments in our equipment range of
MICROCOR® High Speed ER, COSASCO® Access Systems, CORRATER® LPR, CORROSOMETER® ER, CORRDATA® Remote Data Collection, and ULTRACORR®
Ultrasonic Corrosion Monitoring System. Address: 11841 Smith Ave., Santa Fe Springs, CA 90670. Tel: +1 562-949-0123. E-mail: [email protected].
Web site: cosasco.com.
23
Booth # 106
R.U.S.T. specializes in corrosion control and cathodic protection (CP) for underground, submerged structures, bridges, and other infrastructures that may
be damaged due to corrosion. We consult, survey, diagnose, engineer, and install systems all over the world. Our engineers and technicians are all NACE
certified in CP and highly trained and logistically superior to get the job done right the first time and within budget. Address: 6181 Lake Michigan Dr., PMB
105, Allendale, MI 49401. Tel: +1 616-892-3801. E-mail: [email protected], [email protected], rogelio@ no-rust.net. Web site: no-rust.net.
SAE, Inc.
Booth # 230
SAE, Inc. engineers, supplies, and installs environmentally friendly, long-life cathodic protection (CP), AC mitigation, and grounding. SAE manufactures the
patented EnvirAnode® impressed current CP system, and Conducrete®, an NSF 60 listed, low-permeability, conductive backfill that sets up to form a solid
column. The EnvirAnode® system is an environmentally friendly solution that prevents aquifer contamination and eliminates noxious gas. EnvirAnode®
provides superior CP for less money and lasts up to twice as long as standard CP systems, requires fewer wells, and eliminates decommissioning costs.
Offices are located in the USA, Canada, and Mexico. Address: 19 Churchill Dr., Barrie, ON L4N 8Z5, Canada. Tel: 1 877-234-2502. E-mail: [email protected].
Web site: saeinc.com.
Seal for Life Industries
Booth # 246
Featuring industry leading brands of Anodeflex, Covalence, Polyken, Powercrete, and Stopaq, SFL offers the broadest and strongest product lineup in the
market. SFL combines high-tech corrosion prevention, sealing, and insulation solutions with direct, easy, time and cost-efficient applications to protect the
integrity of critical infrastructure and assets. With a worldwide presence, no matter what or where the project, SFL provides the safest and most energyefficient solution to meet your needs. “Seal for Life” unites us and runs through all we do—one goal, one mission—to engineer the best performance-based
infrastructure solutions in the marketplace. “Seal for Life” is our commitment; both to you and to a sustainable world for us all. Address: 25 Forge Pkwy.,
Franklin, MA 02038. Tel: +1 508-918-1600. E-mail: [email protected]. Web site: sealforlife.com.
Sentry Equipment Corp.
Booth # 506
Sentry Equipment Corp. is a global, employee-owned company that designs, manufactures, and services high-quality sampling products and systems for
bulk, gas, liquid, slurry, water, and steam sample types. A recognized leader, it serves the needs of the oil and gas, petrochemical, power generation, mining,
and food and dairy industries with sampling products and systems, pipeline integrity products, and odorant injection technology. Our flagship Sentry brand
of products has helped customers improve product quality, protect assets from corrosion, and meet regulatory, and environmental safety requirements
for over 90 years. Formerly known as Accurate Tool Co., the company’s complete portfolio of retractable injection atomizers, coupon holders, electrical
resistance (ER) probes, injection quills, and retractor systems excel at operator safety, and ease-of-use even in extreme high-pressure conditions. Visit us to
learn more. Address: 966 Blue Ribbon Cir. N., Oconomowoc, WI 53066. Tel: +1 262-567-7256. E-mail: [email protected]. Web site: atcoinc.net.
Shafer, Kline & Warren Inc.
Booth # 509
Sherwin-Williams
Booth # 407
Sherwin-Williams is a single source, global protective and marine coatings supplier with over 4,000 company-owned distribution points worldwide
and a proven track record of extending the lifecycle of customers’ assets. Sherwin-Williams also pioneered the development and commercialization
of single coat rapid cure tank linings, edge-retentive and surface-tolerant coatings, and coatings to combat corrosion under insulation. Further
demonstrating a commitment to service, innovation, and logistical support, Sherwin-Williams launched market-specific apps with coatings
recommendations available at your fingertips 24/7. NACE-certified technical support and troubleshooting on the ground ensure that customers’
expectations are exceeded. Leave nothing to chance. Address: 101 Prospect Ave., Cleveland, OH 44115. Tel: 1 800- 524-5979. E-mail: [email protected].
Web site: sherwin-williams.com/protective.
24
Specialty Polymer Coatings, Inc.
Technical Toolboxes
Specialty Polymer Coatings is a leading formulator, manufacturer, and distributor of state-of-the-art 100% solids (no VOCs) liquid epoxy and polyurethane
coatings. SPC has a broad product line of coating systems, which are used extensively in the pipeline industry, on railway cars, as linings for tanks and sewage
digesters, various steel structures, as well as marine docks and ship applications. SPC is committed to producing the “coating of choice” for our customers.
We are proud of our reputation of providing excellent customer service from the time of project inception to completion. Our hands-on approach to
technical support allows the customer to achieve their objectives with confidence. Address: #101–20529 62nd Ave., Langley, BC, V3A 8R4 Canada. Tel: +1
604-514-9711. E-mail: [email protected]. Web site: spc-net.com.
Technical Toolboxes Inc. (TTI) is a leading global provider of integrated pipeline software and proprietary hardware inspection tools for pipeline engineering
and technical professionals. Our Toolbox software products are helping hundreds of large and small companies throughout the world meet the day-to-day
demands of the pipeline and energy business, and provide companies with engineering software productivity tools for standardization and training of
their technical professionals. We have also ventured into the hardware/external corrosion direct assessment with the 3D Toolbox™, which is a complete 3D
measurement system for inspecting infrastructure assets important to the energy industry, including pipes, tanks, and other static assets. Advanced Phase
Measurement Profilometry technology, together with enhanced optical-digital conversion algorithms and advanced mathematical techniques, allow the
new and improved 3D Toolbox to achieve a superior level of performance. Address: 3801 Kirby Dr., Ste. 520, Houston, TX 77098. Tel: +1 713-630-0505. E-mail:
[email protected]. Web site: technicaltoolboxes.com.
Booth # 306
SSPC: The Society for Protective Coatings
Booth # 404
SSPC is the only nonprofit association that focuses solely on the protection and preservation of steel, concrete, and other industrial and marine structures
through the use of high-performance coatings. We don’t dilute our focus by involvement with other corrosion control technologies. Coatings and linings
are all we do. They’re everything we do. That’s why SSPC is THE coatings society. Address: 40 24th St., 6th Fl., Pittsburgh, PA 15222. Tel: +1 412-281-2331.
E-mail: [email protected]. Web site: sspc.org.
Step-Ko Products, LLC
Thomas Industrial Coatings, Inc.
Booth # 238
Tinker & Rasor
Booth # 214
2015
Sponsor
Step-Ko Products, LLC manufactures flange isolation kits in all sizes and ANSI ratings for raised face, full face, and ring joint flanges along with a variety of retainer
sleeves and washers. This also includes our gaskets for critical services such as our Assureaseal SSC and Assureaseal HT. Step-Ko also carries coated U-bolts
with a thermoplastic half round pad and shrink sleeves for protecting your pipe from corrosion. Additional products include: tape, primers, casing spacers,
sacrificial anodes, flange protectors (both plastic and stainless steel), pipe cap protectors, and nut cap protectors. We are also now a stocking supplier of
monolithic isolation joints for Nuovagiungas Srl. For additional products, please visit our Web site at stepko.com. Address: PO Box 81396, Lafayette, LA 70598.
Tel: +1 337-837-4141. E-mail: [email protected]. Web site: stepko.com.
Tinker & Rasor is a leading manufacturer of corrosion mitigation instrumentation since 1948 and has an extensive line of corrosion protection instruments
and products in use on both large and small projects throughout the world. These include holiday detectors, cathodic protection (CP), reference electrodes,
pipe and cable locators, and CP test stations and identification line markers, both available with custom printing. Tinker & Rasor has a focus on customer
service with our quality standards and commitment to ship products, repairs, and our calibration services with a 24-h turnaround policy, along with our
continuing research and development bringing new and updated instruments to market. Tinker & Rasor is pleased to partner with global distributors/
partners who offer their expert knowledge, understanding, and applications of Tinker & Rasor’s product line. Please visit our booth #19033 at this year’s
CORROSION Expo and our updated Web sites to find out which Tinker & Rasor products meet your need and exceed your expectations. Service is our
Salesman! Address: 791 S. Waterman Ave., San Bernardino, CA 92408. Tel: +1 909-890-0700. E-mail: info@tinker-rasor. com. Web sites: tinker-rasor.com,
teststations.com, and detectron.com.
Stuart Steel Protection Corp.
Tnemec Co., Inc.
Booth # 608
Booth # 330
Booth # 203
Stuart Steel Protection, founded in 1952, provides corrosion control materials and services to the oil, gas, water, power, and marine industries. In
addition to exhibiting the most current innovations in cathodic protection products, the company representatives will be featuring 3M epoxy coatings
and discussing the latest company services. Address: PO Box 476, South Bound Brook, NJ 08880 Tel: +1 732-469-5544. E-mail: [email protected].
Web site: Stuartsteel.com.
An industrial coatings manufacturer since 1921, Tnemec Co., Inc. offers innovative coating and lining options built for aesthetic reliability and long-term
corrosion protection. Address: 6800 Corporate Dr., Kansas City, MO 64120. Tel: +1 816-326-4281. E-mail: [email protected]. Web site: tnemec.com.
Subsurface Solutions
Booth # 606
Booth # 315
T.D. Williamson, Inc.
Booth # 119
Trusted by operators to provide the most comprehensive suite of pressurized pipeline integrity products and services, TDW ensures that its partners are wellpositioned to maximize the throughput, integrity, safety, and service life of their assets. To achieve this, the TDW portfolio includes commissioning; hydrostatic
pressure testing; pigging; batching, cleaning, corrosion control, drying, scraping, launchers/receivers/closures, etc.; positive material identification; inline
inspection; and identifying all known threats: corrosion, cracks, delamination, dents, metal-loss, ovality, etc. Technologies include multiple dataset platform,
SpirALL® EMAT, SpirALL® MFL, active speed control, MFL, GMFL, LFM, DEF, IDOD, XYZ; nondestructive evaluation; hot tapping; and line isolation. Address:
6120 S. Yale Ave., Ste. 1700, Tulsa, OK 74136. Tel: +1 918-447-5000. E-mail: [email protected]. Web site: tdwilliamson.com.
TEAM Industrial Services
Booth # 603
Team Industrial Services is a leading provider of specialty industrial services, including inspection and assessment, required in maintaining high-temperature
and high-pressure piping systems and vessels that are utilized extensively in the refining, petrochemical, power, pipeline, and other heavy industries. We
offer an array of complementary services including inspection and assessment, field heat treating, leak repair, fugitive emissions control, hot tapping, field
machining, technical bolting, and field valve repair. We offer these services in over 100 locations throughout the world. Our industrial services are available 24
hours a day, seven days a week, 365 days a year. We market our services to companies in a diverse array of heavy industries that include the petrochemical,
refining, power, pipeline, steel, and pulp and paper industries, as well as municipalities, shipbuilding, original equipment manufacturers, distributors,
and some of the world’s largest engineering and construction firms. Address: 13131 Dairy Ashford, Ste. 600, Sugar Land, TX 77478. Tel: +1 225-802-4491.
E-mail: [email protected]. Web site: teamindustrialservices.com.
25
Booth # 604
Trenton Corp.
Since 1949, the Trenton Corp. has pioneered the development of wax-based anticorrosion products. Thousands of miles of pipelines are protected by Trenton
systems throughout the world. Trenton products provide effective, long-lasting anticorrosion protection for your resources in above and belowground
settings using hot-applied and cold-applied waxes, outerwraps for mechanical protection, and casing filling for pipeline and cable casings. Benefits of
Trenton anticorrosion materials: minimal surface preparation, ease of application, no special tools required, conformable to irregular surfaces, removable
for inspection, compatible with other coatings, no drying or curing time prior to backfill, environmentally friendly, clean FDS sheets, noncarcinogenic,
and protection for pipelines with operating temperatures up to 230 °F (110 °C). Address: 7700 Jackson Rd., Ann Arbor, MI 48103. Tel: +1 734-424-3600.
E-mail: [email protected]. Web site: trentoncorp.com.
TruQC
Booth # 243
TruQC is cloud-based quality control and process documentation software built for the iPad. We make truly objective project management
possible. We keep all your relevant data organized and at your fingertips. Address: 108 N. Clay, Ste. 210, Kirkwood, MO 63122. Tel: +1 314- 457-3920.
E-mail: [email protected]. Web site: truqcapp.com.
Ulva Insulation Systems
Booth # 607
Ulva Insulation Systems is the global leader in the production of nonmetallic jacketing systems for insulation cladding. ULVA SHIELD flexible, nonmetallic
insulation cladding is uniquely designed to reduce the risk of corrosion under insulation (CUI) within the LNG, oil, gas, and petrochemical industries. For
cold and cryogenic systems, it provides a vapor tight covering that prevents condensation and icing. Due to its broad chemical resistance properties,
it is also ideal for highly corrosive and caustic environments. ULVA recently introduced ULVA CLAD, a rigid, nonmetallic cladding system for areas
at significant risk of mechanical damage, and ULVA SOUND, the industry’s most efficient acoustic insulation systems. Come by our booth #10007, and
inquire about these innovative systems. Address: 1321 Upland Dr., #5232, Houston, TX 77043. Tel: +1 828-514-6505. E-mail: [email protected].
Web sites: ulva-usa.com or ulva.co.uk.
26
US Coatings
Booth # 344
US Coatings is an industry leading manufacture of industrial coatings. We provide you the technology you need for long-term corrosion protection. Our highperformance products are designed to keep your assets in service and corrosion-free. Whether it’s fireproofing, high temp coatings, tank linings, OEM or a
protective barrier against the elements, we have the right product for the job. We also offer our clients on-site surveys, project specifications, asset evaluations,
inspection, and consulting. We look forward to assisting you on your next project! Address: 2355 Weldon Parkway, St. Louis, MO 63146. Tel: 314-205-1500.
E-mail: [email protected]. Web site: uscoatings.com.
Mark Your Calendar for These Upcoming
Mark Your Calendar for These Upcoming
NACE
Mark Your
CalendarEvents!
for These Upcoming
NACE Events!
NACE Events!
Vivax-Metrotech
Booth # 219
Vivax-Metrotech Corp. in Santa Clara, California, offers a wide range of products from water leak detectors, buried utility locators, valve box locators, and video
inspection systems. We have a nationwide network of distributors for sales, local support, and training. Visit us at vivax-metrotech.com or call us at 1 800-4463392 for more information. Address: 3251 Olcott St., Santa Clara, CA 95054. Tel: +1 408-734-1400. E-mail: [email protected]. Web site: vivax-metrotech.com.
Whitford Corp.
Booth # 126
Whitford manufactures the world’s largest, most complete line of high-performance coatings for the oil and gas, industrial, automotive, aeronautics, marine,
and electrical markets. Our Xylan® coatings solve many of these problems, including corrosion, abrasion, lubrication, high-temperature, friction, insulation,
release, etc. All Xylan coatings are designed to meet certain specifications, whether it be resistance to corrosion and chemical attack, superb subsea visibility,
lower maintenance costs, or less downtime, which is why they have been the first choice of many engineers in the offshore industry for more than 40
years. Whatever your coating problem, Whitford probably has the right product to solve it. If not, we will work closely with you to develop the coating that
will. For more information, e-mail us at [email protected] or visit us at our Web site. Address: 47 Park Ave., Elverson, PA 19520. Tel: +1 610-286-3500.
E-mail: [email protected]. Web site: whitfordww.com.
WJTA-IMCA
Booth # 502
The WaterJet Technology Association-Industrial & Municipal Cleaning Association is a global trade association with a 30-year history serving the waterjet
and industrial cleaning industries. WJTA-IMCA establishes safety guidelines in the form of recommended practices for waterjet and vacuum, and works to
promote the use of safe, environmentally friendly applications of waterjet technology, including surface prep and anti-corrosion applications. WJTA-IMCA offers
membership opportunities for contractors, suppliers, and end users, and holds an annual tradeshow, the WJTA-IMCA Conference & Expo, Nov. 2-4, in New
Orleans. The Conference/Expo is the premier global event for the waterjet and industrial cleaning sectors. Learn more at www.wjta.org. Address: 906 Olive Street,
Suite 1200, St. Louis, MO 63101. Tel: 314-241-1445. E-mail: [email protected]. Web site: wjta.org.
WrapMaster, Inc.
Booth # 335
WrapMaster, Inc. provides a range of composite products for the repair of piping and structures. The structural reinforcement products developed for the oil and
gas industry enable permanent pipeline repair without production interruption. WrapMaster, Inc. manufactures the only magnetically detectable composite
repair system designed specifically for smart pig detection, eliminating any post-identification method or procedure. Address: 2701 State Hwy. 322, Longview,
TX, 75603-7020. Tel: +1 903-643-8080. Fax: +1 903-643-8181. E-mail: [email protected]. Web site: wrapmaster.us.
Zerust Oil & Gas
Booth # 228
Zerust Oil & Gas is a division of Northern Technologies International (NTIC), the world’s largest manufacturer of vapor corrosion inhibitors (VCIs). Based in Circle
Pines, Minnesota, with offices in 55 countries, they have over 40 years of experience with products, which reduce steel corrosion rates in multiple industries.
VCIs are proven to effectively protect corrosion prone areas of aboveground storage tank (AST) floors and roofs. Whether a tank is in-service or out-of-service,
in most cases VCIs can be applied to reduce corrosion and extend the service life of these assets. Protection of pipe casings, mothballing of pipelines or
tanks, floating roof leg protection, and many other applications are possible with VCIs. Zerust traditional products focus on the preservation of materials and
equipment for storage, shipping, or mothballing. Address: 4201 Woodland Rd., Circle Pines, MN 55014. Tel: +1 763-225- 6600. E-mail: [email protected].
Web site: zerust-oilgas.com.
Corrosion Technology Week 2015
September 20-24, 2015 | Austin, TX USA
Corrosion
Technology
2015of NACE
This is the annual
“work week”Week
for members
International20-24,
technical
September
2015committees
| Austin, TXand
USAincludes a series of
meetings
on methods
of identifying,
and
Corrosion
Technology
Week
2015 ofpreventing,
This
is the focused
annual
“work
week”
for
members
NACE
combating
corrosion
problems
impacting
many
industries.
International
technical
and includes a series of
September
20-24,
2015 | committees
Austin, TX USA
focused
on methods
ofmembers
identifying,
preventing, and
Thismeetings
is the annual
“work
week”
for
of NACE
NACE
Northern
Area
Eastern
Conference
2015
combatingtechnical
corrosioncommittees
problems impacting
manya series
industries.
International
and includes
of
Octoberfocused
18-21,on
2015
| Ottawa,
ON Canadapreventing, and
meetings
methods
of identifying,
NACE
Northern
Area
Eastern
Conference
2015
This event
will discuss
materials
selection,
coatings
and linings,
combating
corrosion
problems
impacting
many
industries.
surface modification,
protection, and inhibitors.
October
18-21, 2015 |electrochemical
Ottawa, ON Canada
NACE
Northern
Area
Eastern
Conference
This event
will discuss
materials
selection,
coatings and2015
linings,
NACE18-21,
Western
Conference
2015and inhibitors.
surface
modification,
electrochemical
protection,
October
2015 | Area
Ottawa,
ON Canada
28-30,
2015
| Scottsdale,
AZ USA
ThisOctober
event will
discuss
materials
selection,
coatings and linings,
NACE
Western
Area
Conference
2015
This event
will discuss
transportation,
water/wastewater
surface
modification,
electrochemical
protection,
and inhibitors.
process and
distribution
systems, power
industry, process
October
28-30,
2015 | Scottsdale,
AZ USA
control,
andwillinstrumentation.
NACE
Western
Areatransportation,
Conference
2015
This
event
discuss
water/wastewater
process
and distribution
systems,AZpower
October
28-30,
2015 | Scottsdale,
USA industry, process
2015
Department
of Defense–Allied Nations
anddiscuss
instrumentation.
Thiscontrol,
event will
transportation, water/wastewater
Corrosion
Conference
process
and distribution
systems, power industry, process
November
15-19,
2015 | of
Pittsburgh,
PennsylvaniaNations
USA
2015andDepartment
Defense–Allied
control,
instrumentation.
Corrosion
Conference
Discussing corrosion
control efforts for the DoD and defense
ministry
partners
worldwide.
November
15-19,
2015
Pennsylvania
USA
2015 Department of| Pittsburgh,
Defense–Allied
Nations
*This
event
has
been
reviewed
and
approved
by
the
DoD
as
a
DoD
sponsored
Corrosion
Conference
Discussing corrosion
control efforts for the DoD and defense
event and accordingly, meets departmental guidelines for attendance by all
ministry
partners
November
15-19,
2015
| Pittsburgh, Pennsylvania USA
Services, Agencies,
andworldwide.
Industry.
*This event has been reviewed and approved by the DoD as a DoD sponsored
Discussing
corrosion control efforts for the DoD and defense
ministry
Services,partners
Agencies,worldwide.
and Industry.
*This event has been reviewed and approved by the DoD as a DoD sponsored
Services, Agencies, and Industry.
27
For more information about NACE events,
visit nace.org/events
NACE Central Area Conference 2016
August 15-17, 2016 | New Orleans, LA USA
NACE Central Area Conference 2016
August
15-17, 2016
| New Orleans, LA USA
CORROSION
2016
March
6-10, 2016
| Vancouver,
BC Canada
NACE
Central
Area
Conference
2016
August
15-17, 20162016
| New Orleans, LA USA
CORROSION
March
2016 | Vancouver,
BC Canada
NACE6-10,
Corrosion
Risk Management
May 23-25, 2016
| Houston, TX USA
CORROSION
2016
March
2016 |will
Vancouver,
BC Canada
NACE
Corrosion
Risktogether
Management
This6-10,
conference
bring
experts from a wide range of
industries
share| knowledge
May
23-25,to2016
Houston, TXand
USAbest practices in corrosion risk
management.
NACE
Corrosion
This conference
willRisk
bringManagement
together experts from a wide range of
to share
knowledge
and best practices in corrosion risk
Mayindustries
23-25, 2016
| Houston,
TX USA
10th
Element
Oilfield
Engineering with
Thismanagement.
conference will bring together experts from a wide range of
Polymers
industries
to shareConference
knowledge and best practices in corrosion risk
OctoberElement
25 – 27, 2016
| London,
UK
10th
Oilfield
Engineering
with
management.
Polymers
Conference
This world renowned
event focuses on the international
application
polymers
other advanced
materials
October
25 of
– 27,
2016 and
| London,
UK
10th
Element
Oilfield
Engineering
with within the
oil
and
gas
sector.
Polymers
This world Conference
renowned event focuses on the international
application
of polymers
and otherUKadvanced materials within the
October
25 – 27,
2016 | London,
and gas
sector. event focuses on the international
Thisoilworld
renowned
application of polymers and other advanced materials within the
oil and gas sector.
MORE
NACE
Welcome to the
with
NACE Online Training Center
Class Starts When You Are Ready.
Internal Corrosion
for Pipelines
Basic Corrosion e-course
Basic Corrosion is Now Available in a New Online Training Format.
Enjoy anytime, anywhere learning with one of NACE’s most popular courses, now available in an online, self-study
format. The course focuses on the causes and types of corrosion and the methods by which it can be identified,
monitored and controlled.
§ Learn from any computer, tablet or mobile device with internet access
§ The lecture and multi-media based course includes the Basic Corrosion course manual and interactive
exercises throughout to test your knowledge of the material
§ Earn CEUs toward your NACE certification or other professional license
Enhanced:
Internal Corrosion Control Program
After completing NACE International’s Internal Corrosion for Pipelines courses, you’ll
have the tools and knowledge to develop and manage an internal corrosion control
program — a crucial component of protecting your organization’s critical assets.
Course Information:
Chapter
1
Introduction to
Basic Corrosion
Learn the definition of corrosion and understand the economic, environmental and safety impact of corrosion.
Chapter
2
Basics of Corrosion
Electrochemistry
In this chapter, learn the terms and definitions used in corrosion, as well as the processes and concepts of
electrochemistry, oxidation and reduction reactions, thermodynamics, kinetics and passivity
Chapter
3
Corrosive Environments
Identify the characteristics of commonly-encountered corrosive environments such as atmospheric, water and
other electrolytes, soil and high temperature environments.
Chapter
4
Materials
Understand engineering materials such as metals, non-metals, composites, concrete and ceramics and their
relationship to corrosion control
Chapter
5
Forms of Corrosion
Understand the various forms of corrosion, how to recognize each form, materials subject to each form,
environments that promote each form and how to control each form.
Chapter
6
Designing for
Corrosion Control
This chapter will examine how corrosion can be controlled during the design process through construction and
process parameters, drainage, dissimilar metals, crevices, and corrosion allowance.
Chapter
7
Corrosion Control
Methods
The focus of this chapter is corrosion control methods by material selection, modification of environment, protective
coatings, cathodic and anodic protection.
Chapter
8
Inspection, Monitoring
and Testing
Learn the difference between inspection and monitoring and identify the common testing techniques for each.
Pricing:
Member—$1,185 USD
Gain an in-depth understanding of:
§
§
§
§
§
§
Root causes and types of corrosion
How to identify existence of internal corrosion
Monitoring devices, tests and techniques
Design modifications that can be made to minimize internal corrosion
Selection of inspection techniques
When mitigation is required and what methods should be used
§ Integrity assessment techniques
For more information or to register for the course,
visit nace.org/internalcorrosion
* All certifications are administered by the NACE
International Institute, an independent affiliate
of NACE International.
Non-Member—$1,390 USD
nace.org/basiconline
MORE
NACE
with
you know?
Money Opportunities GET MORE Did
In 2015, the average annual salary in the U.S. for those with a CIP Level 1
Recognition Education
MONEY Certification is $109,092.
Source: 2015 NACE International Annual Corrosion Career Survey

final program - NACE International

Transcription

Similar documents

ibostar plus. - Daetwyler USA

TEA STAINED STAINLESS STEEL?

Studying the relationship of chemical and physical parameters on

Keeping waste water fresh with oxygen

protint 751 update

Transhield

Presentación de PowerPoint

“After” - Mexel USA

Sister II Sister 2016 Booth Package - WGOK-AM

Columbia Facilities M aintenance Expo