Automotive Collection 2015

Transcription

PL RA FO
EA NG R
SE E FU
D
SE ETLL
E AI
IN LS
SI
DE
2015
2
MILWAUKEE
®
AUTOMOTIVE COLLECTION
IF YOU ARE SEARCHING FOR THE
FASTEST GROWING RANGE OF CORDLESS
AND CORDED AUTOMOTIVE POWER
TOOLS & ACCESSORIES, NOTHING COMES
CLOSE TO MILWAUKEE®.
2015
We offer the largest 12v & 18v
cordless automotive range in the
market. The range provides the most
efficient blend of power, weight,
performance and reliability perfect
for all automotive end users.
BATTERY
BATTERY
M12 B2
Article no.
4932430064
M18 B2
Article no.
4932430062
M12 B4
Article no.
4932430065
M18 B5
Article no.
4932430483
FEATURES:
Sophisticated electronics: Digital Power Management (DPM)
Overload protection system is also self-resetting: the battery doesn't
need to be removed from the tool to continue working
Milwaukee® robust pack construction offers far greater durability
Most durable pack on the market
Operates down to -20°C
Individual cell monitoring to optimise tool runtime
and ensure long term pack durability
*Compared with previous Milwaukee ® battery technology.
Results dependant on voltage, tool and application.
1.5 AH, 3.0 AH
AND 4.0 AH
BATTERIES
ALSO
AVAILABLE!
NOW WITH 2 YEAR WARRANTY ON ALL REDLITHIUM-ION™ BATTERIES AND 3 YEAR WARRANTY ON ALL TOOLS
REGISTER ONLINE AT WWW.MILWAUKEETOOL.CO.UK
3
INTRODUCING
THE NEW
5.0 AH BATTERY
FOR 2015
1BATTERY FUEL GAUGE
Displays remaining run-time
2 LATCH COVER
Prevents water from entering pack through the
latch buttons
1
2
5
3 WATER PROTECTION BARRIER
Routes water away from the electronics & out of
the battery pack
3
4
6
4 PATENTED REDLINK™
INTELLIGENCE
Protects the pack in abusive situations, provides
optimum performance, and monitors the cells for
maximum life
5 ELECTRONIC COATING
Protects the electronics from water and
condensation
8
7
9
UP TO
2.5X
RUN-TIME*
20%
MORE POWER*
2X
MORE BATTERY LIFE*
6 TEMP CONTROL CELL FRAME
Provides a strong structure and transfers
energy efficiently
7 SINGLE PIECE CELL CARRIER
Full enclosure protects cells and provides a
strong structure delivering maximum durability
REDLITHIUMTM PROTECTION
8 SHOCK RESPONSIVE
SEPARATORS
Prevents pack failure from vibration or drops
10
9 LITHIUM-ION BATTERY CELLS
Deliver up to 2.5x run time, up to 20% more
power and up to 2x more battery life*
10 RUBBER OVERMOLD
Protects cells and pack during drops and
provides maximum life
*Compared with other Lithium-Ion technologies and / or with previous Milwaukee®
battery technology. Results depend on voltage, tool, and application.
4
12 VOLT
SUB COMPACT
POLISHER/SANDER
S
NG IE
HI OR
IS SS
L
E
POCC GE 27
A
PA
E
M12 BPS-421X / Article no. 4933447802
SE
SPECIFICATION
Battery pack capacity (Ah)
No. of batteries supplied
Charger supplied
No load speed gear 1 (rpm)
Disc diameter (mm)
Spindle size
Weight with battery pack (kg)
Supplied in
M12 BPS-421X
1 x 2.0 & 1 x 4.0
2
40min
0 – 2800
0 – 8300
76
M9 x 0.75
1.0
Dyna Case
FEATURES:
Variable two speed selection (0-2800 / 0-8300rpm)
for both polishing and sanding applications
REDLINK™ overload protection electronics in tool
and battery pack deliver best in class system durability
Large capacity of 76mm polishing sponge and 50mm
sanding pad size for fast job completion
Long run time allows frequent task completion with one battery charge
Compact design with only 130mm allows access to hard to reach areas
Spindle lock allows for fast, tool free accessory change
Detachable 2 position side handle
Individual battery cell monitoring optimises tool run time
REDLITHIUM-ION™ battery pack delivers up to 2x more run time, up to
20% more power, up to 2x more battery life and operates better down to
-20°C than other lithium-ion technologies
Supplied with 1x 2.0 Ah & 1x 4.0 Ah REDLITHIUM-ION™ battery pack,
charger & Dyna Case
Also available in naked form M12BPS-0 4933447791
CORDLESS
ROTARY TOOL
CORDLESS
MULTI TOOL
C12 RT-0 / Article no. 4933427183 (NAKED)
C12 MT-402B / Article no. 4933441708
FEATURES:
Variable speed (5000 - 32,000rpm)
Versatile application range
Spindle lock mechanism for easy accessory changes
Superior ergonomics and lightweight
Tool belt portable at only 240mm long
and less than 0.6kg
REDLINK™ overload protection electronics in tool and
battery pack deliver best in class system durability
Ideal for removing rust and polishing out scratches
3.2mm collet fits all current accessories in the market
Perfect on your vehicles interior under the roof and exterior body
Fuel gauge displays remaining battery charge state
FEATURES:
Variable speed (5000 - 20,000rpm) and 1.5º left/right
oscillation movement allows quick completion of
professional applications into materials such as
metal, wood and plastic
Versatile cordless solution for cutting
and removal applications
Will accept competitor accessories
Supplied with an adapter, plunge cut blade OSC 112,
sanding backing pad, 5x sanding sheets
Also available in naked form C12MT-0 4933427180
SPECIFICATION
Charger supplied
No load speed (rpm)
Collet capacity (mm)
Supplied in
C12 RT-0
n/a
n/a
n/a
5000 - 32,000
1.6 / 2.4 / 3.2
n/a
SPECIFICATION
Charger supplied
Oscillation angle left/ right (°)
No load speed (rpm)
Supplied in
C12 MT-402B
4.0
2
80min
1.5
5000 - 20,000
1.2
Tool bag
5
12 VOLT
CUTTING & REMOVAL
H
BLAC
K
SE AD ZA
EP
ES LL
COMPACT
HACKZALL
AG
E3
2
M12 CHZ-402C / Article no. 4933447775
FEATURES:
Milwaukee® designed and built brushless POWERSTATE™
motor for up to 6x longer motor life and up to 70% faster
cutting in certain applications
Individual battery cell monitoring optimises tool run time
and ensures long term pack durability
Milwaukee® patented FIXTEC clamp for fast and easy
keyless blade change
Counter balance mechanism lowers vibration to 6.5 m/s²
allowing the operator to work safely for longer periods of
time reducing fatigue
Sealed gearbox prevents water and debris entering
the housing
LED light illuminates the cutline in low light conditions
Compact and light weight allows users to complete
applications in restricted areas
Also available in naked form M12CHZ-0 4933446960
SPECIFICATION
Charger supplied
No load speed (rpm)
Stroke length (mm)
Supplied in
M12 CHZ-402C
4.0
2
80min
0 - 3000
15.9
1.6
Kitbox
B
BLAN
A DS
E P DES AW
CORDLESS
BANDSAW
SE
E3
M12 BS-402C / Article no. 4933446135
FEATURES:
One handed tool operation - only 3.2kg. Compact
light weight design for cutting with one hand,
overhead in existing installations and in tight spaces
Versatility - cuts a multitude of materials:
body panels, dash boards, exhausts
Fully enclosed guard system - new blade cover
system protects the end-user from blade contact
whilst still ensuring quick and easy blade changes
Cold cutting - spark and burr free
Clean cut - balanced handle design combined with 8-large ball
bearing blade supports provide best in class cut quality
REDLINK™ overload protection electronics in tool and battery
pack deliver best in class system durability
Supplied with a 18Tpi blade
Built in LED light illuminates the work surface
Also available in naked form M12BS-0 4933431310
AG
SPECIFICATION
Charger supplied
No load speed (rpm)
Max. cutting capacity (mm)
Blade length (mm)
Supplied in
M12 BS-402C
4.0
2
80min
0 - 85
41 x 41
687
3.2
Kitbox
2
6
12 VOLT
DRILLING & DRIVING
METAL
DRILL BITS
SEE PAGE 31
COMPACT
PERCUSSION DRILL
M12 CPD-402C
Article no. 4933441117
FEATURES:
Milwaukee® designed and built brushless POWERSTATE™ motor
for up to 10x motor life and up to 25% more power
REDLINK PLUS™ intelligence system delivers the most advanced
digital overload protection for tool and battery and uniquely enhances
the tool performance under load
REDLITHIUM-ION™ battery pack delivers up to 2x more runtime,
up to 20% more power, up to 2x more battery life and operates better
down to -20°C than other lithium-ion technologies
Fuel gauge displays remaining charge
Individual battery cell monitoring optimises tool runtime
Brightest LED workspace illumination
SUB COMPACT
PERCUSSION DRILL
SPECIFICATION
Charger supplied
Chuck capacity (mm)
Max. drilling steel (mm)
Max. percussion rate (bpm)
Max. torque (Nm)
Supplied in Kitbox
M12 CPD-402C
4.0
2
80min
0 - 450
0 - 1700
13
13
25,550
44
1.5
Kitbox
RIGHT ANGLE DRILL
M12 BPD-202C / Article no. 4933443889
C12 RAD-202B / Article no. 4933441218
FEATURES:
Milwaukee® high performance sub compact drill driver measures
185mm in length making it ideal for working within confined spaces
REDLINK™ overload protection electronics in tool and battery
pack deliver best in class system durability
up to 20% more power, up to 2x more battery life and operates better
down to -20°C than other lithium-ion technologies
Individual battery cell monitoring optimises tool runtime
FEATURES:
Long soft grip trigger for comfortable
working in any situation
10mm single sleeve chuck for quick and easy
change of a full range of accessories
REDLINK™ overload protection electronics in tool and
battery pack deliver best in class system durability
Forward and Reverse function
Heavy-Duty full metal gearbox and gears
Slimline soft grip handle
Built in work light making it an ideal tool in confined spaces
Also available in naked form C12RAD-0 4933416900
SPECIFICATION
Charger supplied
Max Torque (Nm)
Max Percussion rate (bpm)
No Load Speed gear 1 (rpm)
No Load Speed gear 2 (rpm)
Chuck capacity (mm)
Max drilling steel (mm)
Supplied in
M12 BPD-202C
2.0
2
40min
30
22,500
0 - 400
0 - 1500
10
10
1.2
Kitbox
SPECIFICATION
Charger supplied
No load speed (rpm)
Chuck capacity (mm)
Max. torque (Nm)
Supplied in
C12 RAD-202B
2.0
2
40min
0 - 800
10
10
12
1.1
Tool bag
7
12 VOLT
DRILLING & DRIVING
SCREWDRIVER
BITS
SEE PAGE 30
COMPACT
SCREWDRIVER
COMPACT
DRILL DRIVER
M12 CD-202C
M12 CDD-402C
FEATURES:
Milwaukee® designed and built
brushless POWERSTATE™ motor
REDLINK PLUS™ intelligence system
REDLITHIUM-ION™ battery pack
Individual battery cell monitoring
FEATURES:
brushless POWERSTATE™ motor
SPECIFICATION
Charger supplied
Tool reception
Max. torque (Nm)
Supplied in
M12 CD-202C
2.0
2
80min
0 - 450
0 - 1700
1⁄4˝ Hex
10
37
1.2
Kitbox
SPECIFICATION
Charger supplied
Chuck capacity (mm)
Max. torque (Nm)
Supplied in Kitbox
M12 CDD-402C
4.0
2
80min
0 -450
0 - 1700
13
13
44
1.5
Kitbox
SUB COMPACT
SCREWDRIVER
SUB COMPACT
DRILL DRIVER
M12 BD-202C
M12 BDD-202C
FEATURES:
Milwaukee® high performance sub compact screw driver measures
175mm in length making it ideal for working in confined spaces
REDLINK ™ overload protection electronics
Brightest LED workspace
illumination
FEATURES:
Milwaukee® high performance sub compact drill driver measures
187mm in length making it ideal for working in confined spaces
REDLINK ™ overload protection electronics
Brightest LED workspace
illumination
SPECIFICATION
Charger supplied
Tool reception
Max drilling steel (mm)
Supplied in
M12 BD-202C
2.0
2
40min
0-400
0-1500
1⁄4" Hex
10
1.0
Kitbox
SPECIFICATION
Charger supplied
Chuck capacity (mm)
Max. torque (Nm)
Supplied in
M12 BDD-202C
2.0
2
40min
0 - 400
0 - 1500
10
30
1.2
Kitbox
8
12 VOLT
DRILLING & IMPACT
SOCKET
SETS
SEE PAGE 28
IMPACT RATCHET
M12 IR-201B / Article no. 3/8":4933448110 1/4":4933451019
FEATURES:
Best in class power and speed with 47 Nm of torque and a
no load speed of 250rpm
Variable speed metal paddle switch trigger - provides greater
user control during application
On board fuel gauge and LED light
Flexible battery system: works with all Milwaukee® M12™ batteries
Reinforced housing - provides high durability similar to steel rachets
Ideal for working inside engine bay, tool can be used to crack tight nuts/bolts
M12 IR
This tool is great for getting in to hard to reach places like
the engine bay and provides more than enough power to do
the job. I can also swap to the smaller 2.0 AH battery from
the 4.0 AH if I need to get in to even tighter spaces
Matt Dixey, Sywell Garage
SPECIFICATION
Charger supplied
No load speed (rpm)
Tool reception
Impact rate (ipm)
Max. torque (Nm)
Supplied in
M12 IR-201B
(1/4")
2.0
1
40min
0 - 250
1⁄4" square
0 - 3000
40
0.9
Tool bag
M12 IR-201B
(3/8")
2.0
1
40min
0 - 250
3/8" square
0 - 3000
47
0.9
Tool bag
COMPACT
IMPACT WRENCHES
FEATURES:
Milwaukee® designed and built brushless POWERSTATE™ motor
for longer motor life and up to 20% more power
REDLINK PLUS™ intelligence system delivers the most advanced
digital overload protection for tool and battery and uniquely
enhances the tool performance under load
The Milwaukee ® DRIVE CONTROL™ allows the user to
shift into different speed and torque settings to maximize
application versatility
Mode 1 for precision work (0 – 1200rpm, 13Nm of torque,
0 - 3000ipm)
Mode 2 delivers maximum performance for the toughest
applications (0 – 2650rpm, 56Nm of torque, 0 - 4000ipm)
M12 CIW12-202C
up to 20% more power, up to 2x more battery life and operates
better down to -18C° than other lithium-ion technologies
Ideal for loosening nuts and bolts
SPECIFICATION
Also available in naked form
M12CIW12-0 4933447132
M12CIW14-0 4933440455
Charger supplied
M12CIW38-0 4933440460
M12 CIW38
Very powerful for how big it is. Nice and
compact and gets in to tight spaces easily
Carl France, Mobile Tyre Maintenance
No load speed (rpm)
Tool reception
Impact rate (ipm)
Max. torque (Nm)
Supplied in
M12 CIW14-202C
M12 CIW12202C (1/2")
2.0
2
40min
1500/2650
½" square
2650/3500
65/160
1.0
Kitbox
M12 CIW38-202C
M12 CIW14202C (1/4")
2.0
2
40min
1200/2650
1⁄4" square
3000/4000
13/56
1.0
Kitbox
M12 CIW38202C (3/8")
2.0
2
40min
1200/2650
3⁄8" square
2650/3500
23/158
1.0
Kitbox
9
12 VOLT
DRILLING & IMPACT
SUB
COMPACT
IMPACT
WRENCHES
FEATURES:
Milwaukee® high performance
sub compact impact wrench
makes it ideal for working within
confined spaces
REDLINK™ overload protection
Heavy duty full metal gearbox
and gears for superior durability
and maximum torque
Individual battery cell monitoring optimises tool run time and ensures long term pack durability
On board fuel gauge and LED light
Also available in naked form M12BIW12-0 4933447134
M12BIW14-0 4933441980
M12BIW38-0 4933441985
TWIN
PACK
M12 PP2A-402C
M12 BIW12202C
Article no.
4933447187
M12 BIW14202C
Article no.
4933443897
SPECIFICATION
Charger supplied
No load speed (rpm)
Tool reception
Impact rate (ipm)
Max. torque (Nm)
Supplied in
M12 BIW12202C
2.0
2
40min
0 – 2550
½" square
0 – 3400
138
1.0
Kitbox
M12 BIW38202C
Article no.
4933443899
M12 BIW14202C (1/4")
2.0
2
40min
0 - 2500
1⁄4" square
0 - 3300
50
1.0
Kitbox
M12 BIW38202C (3/8")
2.0
2
40min
0 - 2500
3/8" square
0 - 3300
135
1.0
Kitbox
FEATURES:
First sub-compact
range of brushless
tools for longer life
First sub-compact
range of tools with
13mm chuck for
heavier applications
First sub-compact
range with 2.0 Ah and
4.0 Ah batteries for
increased runtime
KIT INCLUDES:
1x M12 CPD-0 / 1x M12 CID-0 / 2x 4.0 Ah 12
V REDLITHIUM-ION™ battery packs / 1x 12 V
charger / FUEL™ carry case
SUB COMPACT
IMPACT DRIVER
COMPACT
IMPACT DRIVER
M12 BID-202C
M12 CID-202C
FEATURES:
Milwaukee® high performance sub compact
impact driver
1/4" Hex drive with click lock for single hand
loading of bit
Also available in naked form M12BID-0 4933441955
SPECIFICATION
Charger supplied
No load speed (rpm)
Tool reception
Impact rate (ipm)
Max. torque (Nm)
Supplied in
M12 BID-202C
2.0
2
40min
0 - 2500
1⁄4" Hex
0 - 3300
112
1.0
Kitbox
FEATURES:
Milwaukee® brushless POWERSTATE™ motor
Milwaukee® DRIVE CONTROL™
Mode 1: precision work, Mode 2: maximum performance
1/4" Hex drive with click lock for single hand loading of bit
Ideal for fast removal of screws, tek and self drill screws
Also available in naked form M12CID-0 4933440410
SPECIFICATION
Charger supplied
No load speed (rpm)
Tool reception
Impact rate (ipm)
Max. torque (Nm)
Supplied in
M12 CID-202C
2.0
2
40min
1200/2650
1⁄4" Hex
2700/3550
19/135
1.0
Kitbox
10
12 VOLT
MAINTENANCE
LASER TEMP GUN
DIGITAL MULTIMETER
2266-20LTGA
2217-40DMM / Article no. 4933416976
FEATURES:
12:1 distance to spot ratio, a 1m spot from 12m away
Rugged over-moulding for increased durability and grip
High contrast, easy to read display provides clearer readings
Thermocouple input for contact temperature measurement
A A batteries included
Ideal for pinpointing air conditioning,
exhaust and radiator heat issues
SPECIFICATION
Temperature range
226620LTGA
"*-30 °C - 500 °C
(-22 °F - 932 °F)*"
Basic accuracy (%) 1.5
1.5
Contact temperature (°C)
"*-40 °C - 450 °C
(-40 °F - 852 °F)*"
Repeatability [%]
0.50
Accuracy (mm/m)
0.1 °C (0.1 °F)
Response time (mS)
<500
Emissivity
0.95
Battery type
3 x AA
Weight with battery pack (kg) 0.3
Supplied in
n/a
CORDLESS GREASE GUN
FEATURES:
TRMS and Lo-Z. always guarantees accurate readings
High contrast, easy read display for clear readings
Cat III 600V for increased safety
Side mounted dial for one-handed use
Versatile contact temperature measurement
Slide rail for accessory mount
Supplied with electrical test lead set,
thermocouple (dual banana) and 2x AA batteries
SPECIFICATION
Current AC/ DC (amps)
Voltage AC/DC (V)
Lo-Z measurement
Resistance (Ω)
Continuity
Capacitance [μF]
2217-40
10.00
600.0
Yes
40 Mohm
Audible
1000.0
"*-40º C - 538º C
Contact temperature (°C)
(-40º F - 1000.4º F)*"
Frequency (Hz)
2.00 HZ - 50.00 kHz
Battery type
2 x AA
Weight with battery pack (kg) 0.4
Supplied in
Tool bag
M-SPECTOR 360° CAMERA
M12 GG-0 / Article no. 4933440435 (NAKED)
M12 IC-201C / Article no. S:4933451024 L: 4933448757
FEATURES:
12V motor and 562bar max pressure
Best in class - 7 cartridges per charge
Superior handle balance/ergonomics
Only 355mm long and 3.2kg
REDLINK™ intelligence system
Integrated hose storage,
shoulder strap loop
and LED Fuel™ gauge
Bulk filler valve
Air bleeder valve for quick flow
400ml cartridge capacity, 473ml bulk
Bulk, cartridge or suction capable loading
914mm x 14.4mm high pressure flex hose
with spring guard and grease coupler
FEATURES:
Rotating screen: providing fluid image control
Optimised 68.6mm LCD: digital image and
larger screen delivers crisp, clear picture
9mm 640 x 480 digital image sensor:
superior image quality in nearly half the size
4 surround LED lights: best in class
brightness without shadow or glare
Enhanced cable for durability and manoeuvrability
Hook, magnet, and mirror accessories available
Ideal investigation tool for voids, engine cavities, leaks,
dashboards, bulkheads, gearboxes, and hidden cables
Longer 2742mm cable length available
SPECIFICATION
Charger supplied
Pressure (bar)
Supplied in
M12 GG-0
n/a
n/a
n/a
562
3.2
n/a
SPECIFICATION
Charger supplied
Display size (mm)
Display resolution (pixels)
Camera head diameter (mm)
Camera cable length (mm)
Supplied in
M12 IC-201C
2.0
1
30min
68
320 x 240
9
914
0.6
Kitbox
11
12 VOLT
ESSENTIALS
PREMIUM
HEATED JACKETS
M12 HJRED2-0
M 4933443817 (NAKED)
L4933443820 (NAKED)
XL4933443823 (NAKED)
FEATURES:
Cold water technology – Multi layered
8hr.fabric actively
warms the body & stimulates blood circulation
5 sewn in carbon fibre heating zones – distributes
8hr.
heat to core body areas and to
the pockets
Superior runtime – up to 8 hours of heat on single
battery charge and slimmer design
8hr.– 3 heat settings: High,
Easy touch heat controller
Medium, Low
TM
M18 battery holder – sleek pocket design for
8minimal
hr.
user interference
USB power port to charge electrical devices
Hand pockets + added chest pocket
Water and wind resistant – provides comfort
and durability in harsh environment
USB
CHARGER
INSULATION
WASHER/
DRYER SAFE
WIND/WATER
RESISTANT
3 SETTINGS
M12 HJBL2-0
SPECIFICATION
Sizes
Material
M12 HJBL2-0
n/a
M, L, XL
100% Polyester
M12 HJRED-0
n/a
M, L, XL
100% Polyester
M 4933433778 (NAKED)
L4939433779 (NAKED)
XL4933433776 (NAKED)
RADIO
-
RADIO
C12 JSR-0 / Article no. 4933416365 (NAKED)
C12-28 DCR-0 / Article no. 4933410665 (NAKED)
FEATURES:
Advanced technology tuner for
high reception and clarity
Weather proof MP3 compartment
M12™ battery or 230V mains supply
8 hour runtime on M12™ battery
Weather proof aluminium
speakers
SPECIFICATION
Digital display tuner for
Voltage (DC) (V) 12
accurate signal selection
Voltage (AC) (V)
Mute button for
Battery type
instant volume kill
220-240V power adapter,
3.5mm jack plug for iPod
Charger supplied
auxiliary connection
FEATURES:
AM/FM tuner has digital processor
for high reception accuracy and clarity
Premium speakers and 40W
amplifier produce rich, full sound
Shock absorbing construction
protects against abusive
conditions
Customisable equaliser
SPECIFICATION
and 10-station preset
Voltage (AC) (V)
Battery type Li-ion & PBS
Powered by M12™, M14™,
Charger supplied
M18™, M28™, V18, V28 and
Dimensions (mm)
PBS batteries or AC outlet
Dimensions (mm)
Weight (kg)
Supplied in
C12 JSR-0
12
220-240
Li-ion
n/a
n/a
n/a
267 x 102 x 178
1.8
n/a
Weight (kg)
Supplied in
C12-28 DCR-0
220 - 240
3000
n/a
n/a
n/a
495 x 241 x 279
7.3
n/a
12
TRUEVIEW
TASK
LIGHTING
™
HIGH DEFINITION LIGHTING
TASK
LIGHTING
INSPECTION LIGHTS
Optimised for personal task lighting
LANTERN LIGHTS
Designed to fill a work area or space
AREA
AREA LIGHT
LIGHTING
TRUEVIEW™
Designed to flood a large work area or space
250 W Halogen
OPTIMISED LIGHT COLOUR
FOR WORKSPACES
®
LIGHTING
Milwaukee
TRUEVIEW™ products maintain a
neutral white light that offers the greatest clarity
and comfort to the end-user
Use the highest quality LEDs optimised for each
individual light
AREA
TRUEVIEW™
Standard LED
TRUE REPRESENTATION OF
COLOURS AND DETAIL
Milwaukee® T
RUEVIEW™ products offer the
end-user the ability to accurately see colours
Use high quality LEDs and an optimsed
phosphor coating which covers the majority of
the visible spectrum
TRUEVIEW™
Standard LED
EVEN BEAM PATTERN REDUCES
GLARE AND SHADOWS
Milwaukee® TRUEVIEW™ products offer even
and consistent beam pattern across all lights
that reduces glare and shadows
Use of reflectors and diffusers optimised for
each product that deliver a uniform pattern
13
12 VOLT
18 VOLT
TRUEVIEW™
STICK
LIGHT
TRUEVIEW™
LANTERN
LIGHT
TRUEVIEW™
LED
TORCH
M12 SL-0
Article No. 4932430178
M12 LL-0
M12 TLED-0
TRUEVIEW™
INSPECTION
LIGHT
TRUEVIEW™
LANTERN
LIGHT
M18 IL-0
M18 LL-0
FEATURES:
hanks to their compact design it operates
T
in locations other lights cannot
hree LED design
T
emovable lens plate provides user
R
the ability to replace lens plates when
damaged instead of replacing entire unit
lexible battery system
F
Specification
Platform
Adjustable beam
Removable lens plate
Max. Light output
LED design
Light setting
Max run-time with 4.0 Ah
battery pack
Adjustable hanging hook
M12 SL-0
M18 IL-0
No
Yes
220 Lumens
3 LED
1
45° Both ways
Yes
300 Lumens
3 LED
2
Up to 11 hrs
Up to 15 hrs
1 Pcs
2 Pcs
FEATURES:
REDLITHIUM™ Battery Technology:
delivering more work per charge and
more work over pack life than any battery
on the market
Works with all Milwaukee®
M12™ batteries
FEATURES:
180° - 360° adjustable beam - versatile
design, allows the user to select between
area lighting and task lighting
High powered USB charger charges
electronic devices
Durability - rugged designed with impact
resistant lens to withstand abusive conditions
2 hooks for hanging
Protected against splashing water at all
angles (IPX4)
Flexible battery system
SPECIFICATION
Platform
Adjustable beam
Max. Light output
Light settings
Beam distance
Max run-time with 4.0 Ah
battery pack
USB charger
Adjustable hanging hook
M12 LL-0
M18 LL-0
180° - 360°
400 Lumens
4
23 M
180° - 360°
700 Lumens
4
29 M
Up to 8 hrs
Yes
2 Pcs
Up to 9 hrs
Yes
2 Pcs
TRUEVIEW™
LED
TORCH
M18 TLED-0
FEATURES:
160 Lumen LED light - 2x brighter
and whiter than incandescent
M18™ LED electronics - 2x longer
run time with less heat
Works with all Milwaukee®
M18™ batteries
SPECIFICATION
Platform
Head rotation
Battery type
charger supplied
Battery supplied
M12 TLED-0 M18TLED-0
90°
Naked
Li-ion
No
No
135°
Naked
Li-ion
No
No
TRUEVIEW™ AREA LIGHT
M18 AL-0 Article No. 4932430392 (NAKED)
FEATURES:
Eight high performance LEDs provide 1100
Lumen light output - up to 30% brighter than
250 W Halogen lights
Compact roll cage design provides superior
durability
lexible battery system
F
Convenient built-in handle - hangs
vertically or horizontally
Flexibility to mount vertically on a max
13mm diameter pipe, threaded rod to
maximise hands-free operation
14
18 VOLT
CUTTING & REMOVAL
HEAVY DUTY
DIE GRINDER
MULTI-TOOL
M18 BMT-421C
FEATURES:
Versatile cordless solution for cutting and
removal applications
REDLINK™ overload protection electronics
in tool and battery pack deliver best in class
system durability
Variable speed (12,000 - 18,000rpm) and 1.7°
left/right oscillation movement allows quick
completion of professional applications into
materials such as metal, wood and plastic
M18BMT-0 4933446203
HEAVY DUTY
METAL SAW
HD18 MS-402B
FEATURES:
Compact, ergonomic design for superior
control over standard metal saws
4-pole frameless motor delivers
3600rpm for fast cutting
Quick and easy tool-free depth adjustment
REDLINK™ overload electronics protection
Built-in LED light for accurate cuts
Also available in naked
HD18MS-0 4933427187
SPECIFICATION
Charger supplied
No load speed (rpm)
Blade diameter (mm)
Bore size (mm)
Max. cutting capacity in steel plate (mm)
Max. cutting capacity metal pipe
Max. cutting capacity sections (mm)
Supplied in
HD18 MS-402B
4.0
2
80min
3600
135
20
1.6
50
51
2.6
Tool bag
HD18 SG-0
Article no. 4933417820 (NAKED)
SPECIFICATION
Charger supplied
Oscillation angle left/right (°)
No load speed (rpm)
Supplied in
M18 BMT-421C
1 X 2.0 and 1 X 4.0
80min
1.7
12,000 – 18,000
1.7
Kitbox
SPECIFICATION
Vibration grinding (m/s²)
Vibration grinding uncertainty (m/s²)
HD18SG-0
n/a
n/a
17,500
21,500
3.4
1.5
HEAVY DUTY
BANDSAW
DEEP
CUT BANDSAW
HD18 BS-402C
M18 CBS125-502C
FEATURES:
4.8kg compact light weight design for
cutting overhead and in tight places
8
5mm cut capacity
C
uts through body panels, dashboards
and exhausts
T
ool-free adjustable material shoe
B
lade ejection system for quick changes
EDLINK™ overload electronics protection
R
Built-in LED light for accurate cuts
HD18BS-0 4933419122
FEATURES:
Largest cutting capacity up to 125 x 125mm
material diameter
5 step variable speed selection from 0-116 m/mm
Tool-free blade locking mechanism for quick
and easy saw blade changes
Solid metal rafter hook for quick and easy
jobsite storage
Slim full metal motor housing design and
LED work surface
M18CBS125-0 4933447150
SPECIFICATION
Charger supplied
No load speed (rpm)
Cutting capacity rect. stock (mm)
Blade length (mm)
Supplied in
HD18 BS-402C
4.0
2
80min
146
85 x 85
880
4.8
Kitbox
SPECIFICATION
Charger supplied
No load speed (m/min)
Cutting capacity rect. Stock (mm)
Blade length (mm)
Supplied in
M18 CBS125-502C
5.0
2
100min
0 -116
125 x 125
1139.83
7.3
Kitbox
15
18 VOLT
CUTTING & REMOVAL
ANGLE GRINDER
M18 CAG115XPD-502X
FEATURES:
Milwaukee ® designed and built brushless POWERSTATE
motor for 10x more motor life and up to 25% more run time
with power to grind
REDLINK™ overload protection electronics,
best in class system durability
Premium gearing system
Also available HD18 AG-402C 4933441303
M18 CAG115XPD-0 4933447590
M18 CAG115XPD-502X
This grinder is superb and does a brilliant job; I traditionally burn out corded
grinders very quickly but the Milwaukee® Fuel grinder is still going. Being able
to do delicate jobs and the more hardcore jobs with one tool is fantastic. I can’t
fault this grinder and the battery technology is second to none
Matt Peartings, Mobile Agricultural Maintenance
COMPACT
HACKZALL®
M18 CAG115XPD-502X
5.0
2
100min
8500
115
M14
2.2
Dyna Case
METAL SHEERS
M18 BMS12-0
M18 BMS20-0
C18 HZ-0
FEATURES:
Compact one handed use
hacksaw, ideal for working in
confined spaces
electronics, best in class
system durability
20mm stroke length for controlled
cutting
Built in LED light illuminates the
work surface
Fuel gauge displays remaining
battery charge state
Dual gear counter balance reduces
vibration and increases tool life
Milwaukee® patented FIXTEC
clamp for fast keyless blade
change
For tube cutting, body panel
removal and exhaust
system removal
SPECIFICATION
Charger supplied
No load speed (rpm)
Disc diameter (mm)
Spindle size
Supplied in
FEATURES:
The M18 BMS12 provides accurate
straight cuts with maximum cutting
depth 1.2mm
The M18 BMS20 provides accurate straight
cuts with maximum cutting depth 2.0mm
Unique 360° tool-free rotating head with 12
locking positions to access tight spaces and
increasing user comfort
SPECIFICATION
Charger supplied
No load stroke rate (spm)
Stroke length (mm)
C18 HZ-0
n/a
0 - 3000
20
2.5
SPECIFICATION
Charger supplied
No load speed (rpm)
Max. cutting capacity steel (mm)
Max. cutting capacity aluminium (mm)
Minimum cutting radius (mm)
M18 BMS12-0
n/a
0 – 2500
1.2
2.0
180
M18 BMS20-0
n/a
0 – 2500
2.0
3.2
180
16
18 VOLT
LUBRICANTS
QUICK & EASY
GREASE FILLING
M18 GG
This tool is very easy
to use, fast and powerful
enough to overcome the
dirty greasing points on
JCB’s and even battle
tanks. Obviously a very
good tool that saves a
lot of time
Used on Spartan & Scorpion Battle Tanks & JCB
GREASE GUN
M18 GG-0 / Article no. 4933440493 (NAKED)
FEATURES:
Powerful 18V motor delivers over 620bar max operating pressure
Superior handle balance and ergonomics - only 355mm long and
3.9kg
Best in class runtime - up to 7 cartridges per charge
Integrated hose storage, shoulder strap loop and LED
Fuel™ gauge - added user convenience and less down time
Air bleeder valve - priming mechanism for quick flow
Bulk filler valve
Three way loading - bulk, cartridge and suction capable
1219mm high pressure flex hose with spring guard
Grease capacity 400ml cartridge, 473ml bulk
SPECIFICATION
Charger supplied
Pressure (bar)
Supplied in
M18 GG-0
n/a
n/a
n/a
562
3.9
n/a
17
18 VOLT
SEALANTS
C18 PCG/600T-201B
CAULKING GUNS
FEATURES:
Up to 4500N of force. Min 40% higher than current Milwaukee® caulk gun
Optimised performance with all adhesives and cool temperatures
Anti-drip feature prevents unwanted dripping when trigger is released
Dial control with 6 speed settings allows for maximum bead control
Design ensures constant flow, reduces blow back and expels all sealant from cartridge
REDLINK™ overload protection electronics to deliver best in class system durability
Ideal for windscreen fitters including installing wind screens and all glueing applications
SPECIFICATION
Charger supplied
Max. pushing force (N)
Speed settings
Standard equipment
Supplied in
C18 PCG/
310C-201B
2.0
1
40min
4500
6
310ml canister
2.3
Tool bag
C18 PCG/
400T-201B
2.0
1
40min
4500
6
400ml transparent
2.3
Tool bag
C18 PCG/
600A-201B
2.0
1
40min
4500
6
600ml aluminium
2.3
Tool bag
C18 PCG/
600T-201B
2.0
1
40min
4500
6
600ml transparent
2.3
Tool bag
C18 PCG/310C-201B
C18 PCG/400T-201B
C18 PCG/600A-201B
18
18 VOLT
DRILLING & IMPACT
SOCKET
SETS
SEE PAGE 28
COMPACT PERCUSSION DRILL
FEATURES:
brushless POWERSTATE™ motor for
up to 10x motor life and up to 25%
more power
REDLINK PLUS™ intelligence
system delivers the most advanced
digital overload protection for tool
and battery and uniquely enhances
the tool performance under load
Battery fuel gauge displays
remaining charge
optimises tool runtime and ensures
long term pack durability
REDLITHIUM-ION™
battery pack
delivers up to 2x more runtime, up
to 20% more power, up to 2x more
battery life and operates better
down to -18C° than other lithium-ion
technologies
Comes
complete with new
multi-voltage charger which
accepts M12™ & M18™ batteries
The
high speed and high torque
makes this drill ideal for drilling steel
and drilling out broken bolts and
studs
SPECIFICATION
Charger supplied
Chuck capacity (mm)
Max. percussion rate (bpm)
Max. torque (Nm)
Supplied in
M18
CPD-502X
5.0
2
100min
0 - 550
0 - 1850
13
13
31,450
80
2.3
Dyna Case
M18 CPD-502X
COMPACT
IMPACT WRENCH
M18 CIW12-502X
M18 CIW38-502X
FEATURES:
M18 FUEL™ impact wrench, max performance in compact body
Milwaukee® designed and built brushless POWERSTATE™
motor for longer motor life and up to 20% more power
REDLINK PLUS™ advanced digital overload protection
3-MODE DRIVE CONTROL™ allows for different speed and torque
REDLITHIUM-ION™ up to 2x more runtime, power,
battery life and operates better down to -18°C
Friction ring socket fitment
All metal reversible belt clip
Perfect weight to speed to power ratio for fast application completion
M18 CIW12-0 4933433134
M18 CIW38-0 4933433127
SPECIFICATION
Charger supplied
No load speed (rpm)
Impact rate (ipm)
Tool reception
Max. torque (Nm)
Supplied in
M18 CIW12-502X
5.0
2
100min
1700/2000/2400
2500/3000/3100
½"
105/160/280
1.7
Dyna Case
M18 CIW38-502X
5.0
2
100min
900/1600/2400
1100/2400/3100
3/8"
40/90/265
1.7
Dyna Case
19
18 VOLT
DRILLING & IMPACT
COMPACT
IMPACT DRIVER
M18 CID-502X
FEATURES:
M18 FUEL™ delivers max performance
Brushless POWERSTATE™ motor
REDLINK PLUS™ advanced digital overload protection
3-MODE DRIVE CONTROL™ to shift speed and
torque settings
1/4" Hex drive, click lock for single hand loading
Also available in naked form M18 CID-0 4933433114
SPECIFICATION
Charger supplied
No load speed (rpm)
M18 CID-502X
5.0
2
100min
850/2100/2900
Impact rate (ipm)
1750/2850/3600
Max. torque (Nm)
Tool reception
Supplied in
23/79/180
1/4" Hex
1.5
Dyna Case
MAGNETIC
NUT DRIVERS
SEE PAGE 28
BRUSHED
RIGHT ANGLE IMPACT
DRIVER & WRENCH
M18 BRAID-0 Article no. 4933447891 (NAKED)
M18 BRAIW-0
FEATURES:
Compact
right angle impact driver / impact wrench.
Both measure 307mm in length making it ideal for
working within confined spaces
Full
metal gearbox and gears for superior durability and
maximum torque
Compact
53mm head design rotates into 8 positions
Multi-handle design for multiple hand positions and
maximum comfort
SPECIFICATION
Charger supplied
No load speed (rpm)
Impact rate (imp)
Tool reception
Max. torque (Nm)
M18 BRAID-0
0
0 – 1500 / 0 – 2250
0 – 2400 / 0 – 3400
¼" Hex
41 / 81
1.8
COMPACT
IMPACT WRENCH
COMPACT
IMPACT DRIVER
M18 BIW12-202C
M18 BIW38-202C
M18 BID-202C
FEATURES:
Improved ergonomics - greater accessibility
25% faster than current tool
REDLINK™ intelligence communication
Fits all RED LITHIUM-ION™ battery packs
Optimized impact mechanisms
M18 BIW12-0 4933443590 / M18 BIW38-0 4933443600
SPECIFICATION
Charger supplied
No load speed (rpm)
Impact rate (ipm)
Tool reception
Max. torque (Nm)
Supplied in
M18 BIW12-202C
2.0
2
40min
2450
3350
1⁄2" square
240
1.6
Kitbox
M18 BIW38-202C
2.0
2
40min
0 – 2450
0 - 3350
3/8" Square
210
1.6
Kitbox
FEATURES:
Improved ergonomics - greater accessibility
25% faster than current tool
2-MODE DRIVE CONTROL™
REDLINK™ intelligence communication
Fits all RED LITHIUM-ION™ battery packs
Optimized impact mechanisms
M18 BID-0 4933443570
SPECIFICATION
Charger supplied
No load speed (rpm)
Impact rate (ipm)
Max. torque (Nm)
Tool reception
Supplied in
M18 BID-202C
2.0
2
40min
2000/2750
2450/3450
180
1/4" Hex
1.4
Kitbox
M18 BRAIW-0
0
0 – 1500 / 0 – 2250
0 – 2400 / 0 – 3400
3/8" Square
40 / 76
1.8
20
18 VOLT
IMPACT
HEAVY DUTY
IMPACT WRENCHES
M18 CHIWF12-502X Article no. 4933448103 Features:
2-Mode DRIVE CONTROL™ for
application versatility
M18CHIWF12:
Speed 1 – 135Nm torque,
Speed 2 – 950Nm torque, 425/1700rpm,
450/2300ipm
M18CHIWF34:
Speed 1 – 508Nm torque,
Speed 2 – 1016Nm torque, 1200/1700rpm,
1700/2300ipm
The most powerful 18V cordless impact
wrench on the market
Outperforms competitive cordless, corded,
and pneumatic impact tools and delivers
up to 20% more torque
M18 CHIWF34-502X
Milwaukee® designed mechanism optimized for high torque applications
Each tool has a unique Anvil / Mechanism
Combo optimized to the needs of its user
POWERSTATE™ Brushless Motor
REDLINK™ INTELLIGENCE protecting
Fits all RED LITHIUM-ION™ packs with
onboard fuel gauge
Greater control where max torque
isn’t necessary
Up to 3x motor life Vs. competitors
No wearable components
Contoured soft grip handle the tool &
maximizing performance & productivity
Friction Ring
SPECIFICATION
Charger supplied
No load speed (rpm)
Tool reception
Impact rate (ipm)
Max. torque (Nm)
Supplied in
M18
CHIWF12-502X
5.0
2
100min
425/1700
1/2" square
450/2300
135/950
3.3
Dyna Case
HEAVY DUTY IMPACT WRENCH
WITH FRICTION RING
HD18 HIWF-402C
FEATURES:
With its Milwaukee® 4-pole frameless motor
it delivers a staggering 610Nm of torque,
ideal for powering through the toughest
of applications
in tool and battery pack deliver best in
class system durability
Light weight and ergonomically designed
Fuel gauge displays remaining battery
charge state
Ideal for heavy duty applications such as
steel fabrication, mechanical fastening and
removal of wheel nuts
SPECIFICATION
Charger supplied
No load speed (rpm)
Tool reception
Impact rate (ipm)
Max. torque (Nm)
Supplied in
HD18 HIWF-402C
4.0
2
80min
0 - 1900
1/2" square
0 - 2200
610
3.0
Kitbox
M18
CHIWF34-502X
5.0
2
100min
1200/1700
3/4" square
1700/2300
508/1016
3.3
Dyna Case
21
SOCKET
SETS
18 VOLT
SEE PAGE 28
FOCUS ON
IMPACT WRENCHES
M18 CHIWF12
It’s had lots of abuse and it
just keeps going. The competitor
tool could not release the steering
wheel bolt but the Milwaukee® did
it straight away with ease. I stopped
using my air tool since we got the
Milwaukee® impact wrench
It does everything you ask of
it, we don’t use airtools anymore.
I use it all day long and one
charge lasts two full days. We just
came in to the 21st century. We
always used air but now we have
a cordless as good as this we
cannot live without it
M18 CHIWF34
Matt Dixey, Sywell Garage
Well impressed with the ¾
impact wrench. This even caters
for removing wheels on large
articulated lorries and does
everything you expect it to do.
I also now don’t have pull round
awkward and inconvenient air
leads like I used to
Carl France, Mobile Tyre Maintenance
Dave Minster, MOT Service Center
RUBBER BOOTS
M18 FUEL CIPW
RUBBER BOOT
Fits: M18 CIW
M18 FUEL HIPW
RUBBER BOOT
Fits: M18 CHIW
HD18 HIWF
The battery lifetime is great
and off one charge I am able
to fasten a huge number of
bolts on large metal frame shed
construction jobs
Matt Peartings, Mobile Agricultural Maintenance
22
18 VOLT
DRILLING & IMPACT
EXPLAINED
1. POWERSTATE ™ BRUSHLESS MOTOR
ilwaukee® designed and built brushless motor
M
Out-performs all leading competitors
Motor life significantly increased
2. REDLITHIUM-ION™ BATTERY PACK
ost durable pack on the market
M
Up to 2x more runtime*
Operates down to -20°C
Individual cell monitoring to optimise tool runtime and ensure
long term pack durability
3. REDLINK PLUS™ INTELLIGENCE
ost advanced electronic system on the market for
M
maximum performance
Total system communication with overload protection
increases tool life
Built-in fuel gauge displays remaining charge
* 5.0 AH has 2.5 x more run time
M18 PP2A-502C / Article no. 4933448083
KIT INCLUDES:
1x M18 CPD-0 / 1x M12 CID-0 / 2x 5.0Ah 12V REDLITHIUM-ION™
battery packs / 1x M12-18C multi-voltage charger / FUEL™ carry case
M18 PP2B-502C / Article no. 4933448088
KIT INCLUDES:
1x M18 CPD-0 / 1x M12 CIW12-0 / 2x 5.0Ah 12V REDLITHIUM-ION™
battery packs / 1x M12-18C multi-voltage charger / FUEL™ carry case
23
18 VOLT
ESSENTIALS
7.5 L WET/
DRY VACUUM
-
C12-28 DCR-0 / Article no. 4933410665 (NAKED)
M18 VC-0
FEATURES:
18V motor, max air flow of
1246 l/min / 80bar suction
High efficiency wet/dry filter
for fine dust collection
Built-in blower
7.5 l capacity
Stackable tool box design
Accessory and hose storage
Works with all 18V
Milwaukee® slide rail
batteries - M18 B/BX,
C18 B/BX, V18 B,
18V PBS 3000
Washable filter, hose,
crevice tool and utility nozzle
SPECIFICATION
Charger supplied
Capacity solids (l)
Capacity liquids (l)
Hose diameter (mm)
Hose length (m)
Max. vacuum (mbar)
Air volume (l/min)
Filter type
Supplied in
RADIO
M18 VC-0
n/a
n/a
n/a
9.7
7.5
31.5 / 41.7
1.8
80
1246
Wet/Dry
5.4
n/a
RADIO CHARGER
FEATURES:
AM/FM tuner has digital processor
for high reception accuracy
and clarity
Premium speakers and 40W
amplifier produce rich, full sound
Shock absorbing construction
protects against abusive
conditions
Customisable equaliser
and 10-station preset
Powered by M12™, M14™,
M18™, M28™, V18, V28 and
PBS batteries or AC outlet
M12-18C
FEATURES:
Built in charger function allows for quick, convenient charging of any
M18™ battery or electronic devices via USB port
Digital bluetooth receiver: play music up to 30 m away from your
smartphone, computer, or tablet
AC/DC versatility
Exclusive AM/FM tuner with digital processor delivers highest
reception accuracy and signal clarity
Premium speaker and 40 W amplifier produce rich, full sound
Reinforced roll cage and metal handles protects against abusive
jobsite conditions
Protected 2.1 Amp USB power outlet charges devices in both AC
and DC mode
Supplied with auxiliary input
cord, 2 x AAA batteries
FEATURES:
Recharges all M18™, and
M12™ REDLITHIUM-ION™
battery packs
Recharges in sequence
REDLITHIUM-ION™ 3.0Ah /
4.0Ah battery packs recharge
in 40min / 80min or less
M18 RC-0
18
220 – 240
Li-ion
0
300 x 307 x 370
40
7.7
C12-28 DCR-0
220 - 240
3000
n/a
n/a
n/a
495 x 241 x 279
7.3
n/a
MULTI VOLTAGE
CHARGER
M18 RC-0
SPECIFICATION
Voltage (DC) (V)
Voltage (AC) (V)
Battery type
Dimensions (mm)
Speaker output (W)
Weight (kg)
SPECIFICATION
Voltage (AC) (V)
Battery type Li-ion & PBS
Charger supplied
Dimensions (mm)
Weight (kg) 7.3
Supplied in
SPECIFICATION
System
Charging range
Charging time
For battery type Nicd
For battery type NiMh
For battery type Li-Ion
M12-18C
M12, M18
12 - 18 V
40/80min
n/a
n/a
Yes
MULTIBAY CHARGER
M1418 C6
Article no. 240 V: 4932430310
FEATURES:
Charges up to 6 batteries sequentially
By-pass mode to select the battery
bay that gets charged first
Integrated hang holes
Compact size
Convenient carrying handle
24
AC CUTTING (CORDED)
DEEP CUT 125MM
CORDED BANDSAW
BS125
Article no. 4933448860 (240V)
FEATURES:
Powerful 1100 watt motor provides maximum
performance and durability
Largest cutting capacity up to 125 x 125mm
material diameter
4 step variable speed selection from 0 - 116 m/min
Constant power technology maintains cut speed in
the toughest applications for optimal performance
Gear protecting clutch extends gear and motor life
by absorbing high impact forces caused by blade
lock-ups
Slim full metal motor housing design and LED work
surface illumination for best cut visibility
Tool-free blade locking mechanism for quick and
easy saw blade changes
Tool-free adjustable shoe
SPECIFICATION
Power input (W)
No load speed (m/min)
Cutting capacity rect. stock (mm)
Max. cutting capacity metal pipe
Blade length (mm)
Weight (kg)
Supplied in
BS 125
1100
0 – 116
125 x 125
125
1139.83
6.5
Kitbox
1500 W
SAWZALL®
DRY CUT METAL
CIRCULAR SAW
SSPE 1500 X
Article no. 4933429140 (240V)
MCS 66
Article No. 4933440615 (240V)
FEATURES:
1500W Milwaukee® motor
- highest overload protection in the industry
Constant power technology for unmatched
cutting performance
Patented gear protecting clutch and counter balanced mechanism
Variable speed trigger and dial speed control
FIXTEC blade clamp system with adjustable shoe
Supplied with a SAWZALL® blade, plus an
additional keyed blade clamp and 4m cable
FEATURES:
T
echnology provides fast, clean
and burr-free metal cutting
Cuts steel, stainless steel,
aluminium, insulated foam panel
Large cutting depth of 66mm
Powerful 1800w, 4000rpm motor
Exclusive chip-release for fast waste disposal and blade changing
Plunge lever for fast and effective plunge cuts
Supplied with 42 tooth cermet tipped blade
SPECIFICATION
Power input (W)
No load stroke rate (spm)
Stroke length (mm)
Weight (kg)
Supplied in
SSPE 1500 X
1500
0 - 2800
32
4.5
Kitbox
SPECIFICATION
MCS 66
2200
W ANGLE
GRINDER
Power input (W)
1800
No load speed (rpm)
Blade diameter (mm)
Max. cutting depth 90˚ (mm)
Bore size (mm)
Weight (kg)
Supplied in
4000
203
66
15.87
6.4
Kitbox
25
AC GRINDING (CORDED)
750 W ANGLE
GRINDER
AG 750
Article No. 4933431120 (240V)
FEATURES:
C
ompact and powerful 750w motor
M
etal gearbox for extended durability
S
pindle lock
M
etal gear head for excellent visibility
of workpiece and optimised cutting depth
D
irected air exhaust, protected air inlets
G
ear head rotates at 90° intervals for added versatility
S
afety guard, side handle, flange,
flange nut and 4m cable
1000 W ANGLE GRINDER
SPECIFICATION
Power input (W)
No load speed (rpm)
Disc diameter (mm)
Cutting depth (mm)
Spindle size
Weight (kg)
Supplied in
AG 10-115
Article no. 4933440320 (240V)
AGV22-230/DMS
Article no. 4933440910 (240V)
FEATURES:
Powerful, 1000 W motor for strong performance in all applications
Extreme compact design and 2.1 kg for most comfortable handling
urst resistant keyless safety guard
B
amped slide switch - easy actuating switch, even when wearing gloves
R
Long 4m rubber cable for more
comfortable handling
FEATURES:
Compact design, powerful,
2200W motor
Keyless safety guard
Anti-vibration side handle
Soft start for smooth start up
Access to brushes for
fast servicing
4m cable
SPECIFICATION
Power input (W)
No load speed (rpm)
Disc diameter (mm)
Cutting depth (mm)
Spindle size
Weight (kg)
FIXTEC flange nut
Supplied in
AG 10-115
1000
11,000
115
28
M 14
2.1
No
n/a
AG 750
750
10,000
115
28
M 14
1.8
n/a
SPECIFICATION
Power input (W)
No load speed (rpm)
Disc diameter (mm)
Cutting depth (mm)
Spindle size
Weight (kg)
FIXTEC flange nut
Deadman switch
Line lock out function
Autobalancer system
AVS side handle
Rotatable main handle
Supplied in
AG 22-230
2200
6600
230
68
M 14
5.4
No
Yes
No
No
Yes
No
n/a
www.milwaukeetool.co.uk
26
AC POLISHING (CORDED)
1450 W
POLISHER SET
AP 14-2 200E Article no. 4933442350 (240V)
FEATURES:
Highest power in its class with 1450 Watt
No speed drop and temperatures rise, even in low speed
applications due to high torque gearing
7 step speed selection from 490-2100rpm’s for best polishing results
Variable speed trigger with locking fuction for best handling
Thermal overload protection with low speed cooling area to
prevent overheating
Large rubber overmold areas on main handle and gear case
for most comfortable usage
6m long PUR cord for improved life time and enough length
to go around the car
AP 14-2 200E SET Article no. 4933442355 (240V)
SET CONTAINS:
2 x Polishing sponges Lambswool 2 x 250ml Compound
Flexible backing pads
Cloth
SPECIFICATION
Power input (W)
No load speed (rpm)
Disc diameter (mm)
Spindle size
Weight (kg)
Variable speed
Supplied in
AP 14-2 200 E SET
1450
490-2100
200
M 14
2.6
Yes
Dyna Case
AP 14-2 200E
The Milwaukee® AP14 1450W Polisher has performed
very well. The anti-tangle long card works fantastically
well and all of the variable speeds seem just right. The
weight of the machine is like no other on the
market that I’ve used; it’s perfectly
balanced and the rubber protective
coating that surrounds the machine
makes it a real pleasure to hold.
Chris, The MOT and Repair Centre
1200 W
POLISHER
25 LITRE
ELECTRONIC
CLEAR PRESS
DUST EXTRACTOR
AP 12E
Article no. 4933449380 (240V)
AS2 250ELCP
FEATURES:
1200 W motor
Ergonomic design for long work shifts
Special gear for high torque speed
Variable speed selection for ideal speed
Thermal overload protection
No load speed limitation
6m cable
FEATURES:
Large 25 litre tank capacity
1250 W motor power with over
210 mbar suction
2600W power take off capacity
Clear press filter cleaning system
maintains suction efficiency
Dust class L Standard MAK-factor
> 1 mg/m3
Wet and dry capability
7.5 m rubber cable
SPECIFICATION
Power input (W)
No load speed (rpm)
Disc diameter (mm)
Spindle size
Weight (kg)
Variable speed
Supplied in
AP 12E
1200
900 - 2500
150
M 14
2.2
Yes
n/a
SPECIFICATION
Power input (W)
Air volume (l/min)
Max. vacuum (mbar)
Capacity (l)
Hose diameter (mm)
Weight (kg)
AS2 250ELCP
1250
3600
210
25
32
10.4
27
ACCESSORIES
PREMIUM
POLISHING
ACCESSORIES
(CORDED)
COMPATIBLE WITH
M12 BPS-421X
POLISHING
BACKING PAD
WITH M14 THREAD
POLISHING ACCESSORIES
(CORDLESS)
POLISHING FIBRE DISC
BACKING PAD (50MM)
POLISHING
BACKING PAD
POLISHING SPONGE
– HARD (75MM)
POLISHING SPONGE
– SOFT (75MM)
Very flat design with excellent
flexibility. Low vibration allows
precise work on any flat and
curved profiles.
LAMBSWOOL
POLISHING DISC
100% NATURAL LAMBSWOOL
POLISHING LAMBSWOOL
(75MM)
Premium quality with extremely
high fibre density for longer lifetime.
For finishing old and fresh paint.
POLISHING SPONGE
– HARD
Hard sponge with coarse foam
structure. For maximum removal
of the reconditioning lacquer,
removing deep scratches and
polishing weather-beaten lacquer.
SHOCKWAVE
IMPACT DUTY SETS
40 PIECE DRILLING
& DRIVING SET
POLISHING SPONGE
– SOFT
Shockwave Impact Duty
screwdriving bits, drill bits & nut drivers
For fine polishing with polishing
creams/wax compounds to
remove very fine scratches and
holograms (swirls)
48 PIECE DRILLING
& DRIVING SET
screwdriving bits and drill bits
56 PIECE DRILLING
& DRIVING SET
screwdriving bits
Compression
Forged Tip
ideal fit and
reduces
breakage
Shock Zone
Geometry
designed to
flex with
spring-like
action
Reduces
stress at
the tip
Custom
Engineered
steel & heat
treatment
High shock
resistance
MICROFIBRE
POLISHING CLOTH
Super-soft premium microfibre
polishing cloth for finishing gloss
polishing. With good absorption
proporties perfectly suited for final
finishing and removing water spots
from sensitive surfaces.
28
ACCESSORIES
SOCKETS SETS (IMPACT RATED)
FEATURES:
Impact duty (Chrome-Molybdenum)
steel is high quality alloy steel which
provides ultimate strength and
durability.
Best fitting thanks to 6 gripping points.
Recessed corners allow torque to be
transferred across the flats of the socket
rather than p
roducing stress on the
points or corners.
Thin wall construction provides access
to tight spaces.
Deep wall construction provides
clearance for protruding bolts.
Laser etched size markings for easy
identification and won’t wear off.
DESCRIPTION
10 piece Shockwave Impact Duty™ ½" Socket Set
½" sockets set Contents: 8 / 10 / 11 / 12 / 13 / 14 / 16 / 17 / 19 / 21mm.
20 piece Shockwave Impact Duty™ ¼" Socket set
12 x ¼" sockets: 4 / 4.5 / 5 / 5.5 / 6 / 7 / 8 / 9 / 10 / 11 / 12 / 13mm. 50mm total
length. / 6 x screwdriving bits 25mm length: PH2, PZ2, TX 15, TX20, TX25, TX30 / 1 x
socket adaptor ¼" Hex – ¼" square drive / 1 x bit adaptor ¼" square (F) – ¼" Hex. To
accept screwdriving bits.
QTY
ID. NO. EAN CODE
4932 4002395
1
352861
375196
1
352862
375202
A
½"
½"
½"
½"
½"
½"
½"
½"
½"
½"
½"
½"
½"
½"
¼"
¼"
¼"
¼"
¼"
¼"
¼"
¼"
¼"
¼"
¼"
¼˝
B
MM
8
10
11
12
13
14
16
17
19
21
24
27
30
32
4,0
4.5
5
5.5
6
7
8
9
10
11
12
13
C
MM
78
78
78
78
78
78
78
78
78
78
78
78
78
78
50
50
50
50
50
50
50
50
50
50
50
50
D
MM
12
12
12
12
12
15
15
18
21
24
24
24
24
24
3
3.5
4
4.5
6
6
7.5
7.5
9
11
12
12
E
MM
15
17
18
19
20
22
23.8
25.8
27.8
29.8
33.8
37.8
41.8
43.8
7.7
8
8.8
9.5
9.8
11.4
12.5
13.8
14.3
16.8
17.8
18.8
F
MM QTY
21.8 1
21.8 1
21.8 1
21.8 1
23.8 1
23.8 1
23.8 1
25.8 1
27.8 1
29.8 1
33.8 1
37.8 1
38
1
38
1
12.8 1
12.8 1
12.8 1
12.8 1
12.8 1
12.8 1
12.8 1
13.8 1
14.3 1
16.8 1
17.8 1
18.8 1
MAGNETIC NUT DRIVERS
SOCKET AND BIT ADAPTORS
FEATURES:
Custom engineered steel and heat
treatment for maximum strength and
extreme durability.
Strong magnetic tip for secure grip
Reception: ¼˝ Hex (DIN 3126 – E 6.3).
Very suitable for high torque and
impact applications.
1
SIZE MM AF
FOR ANCHOR ROD LENGTH
(ACROSS FLATS)
THREAD SIZE
MM
QUANTITY
5.5
M 3
65
1
6.0
M 3.5
65
1
1 "
⁄4
–
65
1
7.0
M 4
65
1
5 "
⁄16
–
65
1
8.0
M 5
65
1
3 "
⁄8
–
65
1
10
M 6
65
1
12
M 7
65
1
13
M 8
65
1
17
M 10
65
1
5 piece Shockwave Impact Duty™ nut driver set
Contents: Ø 7 / 8 / 10 / 12 / 13 mm
1
3
ID. NO.
4932
352536
352537
352538
352539
352540
352541
352542
352543
352544
352545
352546
EAN CODE
4002395
371945
371952
371969
371976
371983
371990
372003
372010
372027
372034
372041
2
352822
374809
3
2
DESCRIPTION
1. Socket adaptor
¼" Hex – ¼" square drive
DIN 3126 – E 6.3
2. Socket adaptor
¼" Hex – ½" square drive
DIN 3126 – E 6.3
3. Bit adaptor
½" square – ¼" F
To accept screwdriving bits
ID. NO.
EAN CODE
4932
4002395
352847
375059
352848
375066
352849
375073
352850
375080
352851
375097
352852
375103
352853
375110
352854
375127
352855
375134
352856
375141
352857
375158
352858
375165
352859
375172
352860
375189
Included in 20 piece set
Available in set only
TOTAL
EAN
ID.
LENGTH QTY NO.
CODE
MM
4002395
50
1
4832
5030
195039
50
1
4832
5032
195046
50
1
v
195015
MAGNETIC BIT HOLDER
TOTAL
ID.
DESCRIPTION
LENGTH QTY NO.
MM
4932
1. Magnetic bit holder
60
1 352
403
¼" Hex reception DIN 3126 – E 6.3
2. Magnetic bit holders – Long series 152
1 4832
4511
¼" Hex reception DIN 3126 – E 6.3
3. Magnetic bit holders – Long series 305
1 4832
4512
¼“ Hex reception DIN 3126 – E 6.3
1
EAN
CODE
4002395
195039
195046
195015
29
ACCESSORIES
SHOCK
ZONE
SCREWDRIVING BITS (IMPACT RATED)
10 / 20 / 25 piece
storage container
FEATURES:
Designed for use with Impact Drivers the Shockwave Impact Duty™
accessory line is not only ideal for heavy duty impact applications,
but also delivers a full system solution for all the user’s drilling and
fastening needs.
Shock Zone Geometry – Designed to Flex.
Shock Zone reduces stress at the tip resulting in less tip breakages.
The combination of the Shock Zone design and special heat treatment
absorbs impacts and allows the bit to flex with spring like action.
Compression forged tip provides the best fit with screw head,
reducing cam out and stripping, resulting in outstanding life time.
Custom engineered steel – Milwaukee® custom metal formula makes
the Shockwave bits more resistant to shock from impacting
INFO
Phillips
SIZE
PH 1
PH 2
PH 3
Pozidrive
PZ 1
PZ 2
PZ 3
Hex
Hex 4mm
Hex 5mm
LENGTH
MM
25
90
25
25
50
50
90
25
50
90
25
25
90
25
25
50
50
90
25
25
50
25
25
QUANTITY
2
1
2
25
1
10
1
2
1
1
2
25
1
2
25
1
10
1
2
25
1
2
2
ID. NO.
4932
352430
352591
352431
352551
352432
352975
352592
352433
352434
352593
352435
352552
352594
352436
352553
352437
352976
352595
352438
352554
352439
352446
352447
EAN CODE
4002395
370894
372492
370900
372096
370917
376322
372508
370924
370931
372515
370948
372102
372522
370955
372119
370962
376339
372539
370979
372126
370986
371051
371068
1
2
3
1. 25mm ¼" Hex – DIN 3126 – C 6.3
2. 50mm ¼" Hex – DIN 3126 – E 6.3
3. 90mm ¼" Hex – DIN 3126 – E 6.3
INFO
Torx
SIZE
TX 10
TX 15
TX 20
TX 25
TX 30
TX 40
TX 50
Slotted
SL 0.6 x 4.5
SL 0.8 x 5.5
SL 1.2 x 6.5
LENGTH
MM
25
25
25
25
50
50
90
25
25
50
50
90
25
25
50
25
25
50
25
25
25
25
25
QUANTITY
2
2
2
25
1
10
1
2
25
1
10
1
2
25
1
2
25
1
2
20
2
2
2
ID. NO.
4932
352598
352440
352441
352555
352442
352977
352596
352443
352556
352444
352978
352597
352445
352557
352985
352599
352709
352986
352600
352710
352601
352602
352603
EAN CODE
4002395
372560
370993
371006
372133
371013
376346
372546
371020
372140
371037
376353
372553
371044
372157
376421
372577
373673
376438
372584
373680
372591
372607
372614
KNUCKLETM
DESCRIPTION
NO. EAN CODE
QTY ID.
4932 4002395
KnuckleTM
1 x KnuckleTM
1
1 x PH1 / 2 x PH2
1 x PZ1 / 2 x PZ2 / 1 x PZ3
1 x TX15 / 1 x xTX20 / 1 x TX25
352
938
FEATURES:
Impact rated. can be used with both cordless and impact drills.
Very compact offset attachment.Ideally suited to working in confined
and limited spaces.
Solid metal construction to absorb impact action.
0º and 30º positions.
¼" Hex shank fits directly into the chuck preventing slippage.
Suitable for use with ¼" Hex impact drivers up to 180 Nm torque.
375967
30
ACCESSORIES
SCREWDRIVING BITS (NON IMPACT RATED)
QTY
ID. NO.
4932
EAN CODE
4002395
1. Magnetic bit holder with quick release clutch.
Total length 58mm.
1
373483
351060
2. Screwdriving bit set
27 pc. robust and compact with an extra big latch.
PH1 x 2 / PH2 x 2 / PH3 x 1
PZ1 x 2 / PZ2 x 4 / PZ3 x 2
TX10 x 2 / TX15 x 3 / TX20 x 3
TX25 x 3 / TX30 x 1 / TX40 x 1
Magnetic bit holder with quick release clutch
1
352747
374052
3. Single Screwdriving bit set
Contents:
Screwdriving bits 25mm length
PH1x2/PZ1x2/TX10x2/TX25x3
Screwdriving bits 50mm length
PH1x1/PZ1x1/TX20x1
PH2x1/PZ2x1/TX25x1
Magnetic bit holder with "Hex reception x1
1
352068
367214
DESCRIPTION
IMPACT DUTY HOLESAWS
FEATURES:
Thin wall – 8 TPI = smooth burr free holes
0.6mm thick = less resistance → up to 40% faster
Shallow cup optimised for drilling thin metal
8% Cobalt Bi-Metal = best durability in a lifetime
Ejection spring auto ejects slugs
Stop shoulder prevents over drilling
¼" Hex shank = impact driver compatible
Max. 2mm steel, aluminium and stainless steel
(max. 1.5mm)
ARTICLE
NO.
49569805
49569810
49569815
49569820
49569825
49569830
49569835
Ø
MM
19mm
22mm
25mm
29mm
32mm
35mm
38mm
1
2
3
31
ACCESSORIES
HOLE DOZERTM HOLESAWS
The Milwaukee® Hole Dozer™
is the workhorse that provides
unstoppable durability through the
most demanding applications.
FEATURES:
Lifetime warranty against tooth breakage
Rip guard tooth geometry provides for the most durable
tooth form and best lifetime
Multiple leverage points to work cut material
out of the holesaw for faster plug removal
– Deepest access for thick plugs
– Higher access for thin material
THUNDERWEB HSS-R DRILL BITS
Ø
135°
FEATURES:
THUNDERWEB Drill bits are manufactured with a unique internal
core which gets thicker towards the back of the drill bit
This design builds in added strength, ensuring – Less Breakages
THUNDERWEB drill bits accept higher feed pressure for Faster
Drilling and Longer Life
135° Precision point – good for drilling on curved surfaces
B
A
DESCRIPTION
ID. NO.
4932
EAN CODE
4002395
THUNDERWEB HSS-G (19 piece), plastic cassette
Ø 1 / 1.5 / 2 / 2.5 / 3 / 3.5 / 4 / 4.5 / 5 / 5.5 / 6 / 6.5 / 7 / 7.5 / 8 / 8.5 / 9 / 9.5 / 10 mm
352374
370337
THUNDERWEB HSS-G (25 piece), plastic cassette
Ø 1 / 1.5 / 2 / 2.5 / 3 / 3.5 / 4 / 4.5 / 5 / 5.5 / 6 / 6.5 / 7 / 7.5 / 8 / 8.5 / 9 / 9.5 / 10 / 10.5 / 11 / 11.5 / 12 / 1
2.5 / 13 mm
352376
x370351
Ø
MM
1.0
1.5
2.0
2.5
3.0
3.2
3.5
4.0
4.2
4.5
4.8
5.0
5.5
6.0
6.5
6.8
7.0
7.5
8.0
8.5
9.0
9.5
10.0
10.5
11.0
11.5
12.0
12.5
13.0
A
MM
34
40
49
57
61
65
70
75
75
80
86
86
93
93
101
109
109
109
117
117
125
125
133
133
142
142
151
151
151
B
MM
12
18
24
30
33
36
39
43
43
47
52
52
57
57
63
69
69
69
75
75
81
81
87
87
94
94
101
101
101
QUANTITY
2
2
2
2
2
2
2
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
ID. NO.
4932
352345
352346
352347
352348
352349
352350
352351
352352
352353
352354
352355
352356
352357
352358
352359
352360
352361
352362
352363
352364
352365
352366
352367
352368
352369
352370
352371
352372
352373
EAN CODE
4002395
370047
370054
370061
370078
370085
370092
370108
370115
370122
370139
370146
370153
370160
370177
370184
370191
370207
370214
370221
370238
370245
370252
370269
370276
370283
370290
370306
370313
370320
32
THIN METAL CUTTING DISCS
FIXTEC NUT
FEATURES:
Applications: Iron and sulphur free top line thin
cut-off wheels for all steels. Best suitable for
stainless and acid-resistant steel, hardox,
heat-resistant cast steel, spring steel, mild and tool steel.
Characteristics: Long service life along with excellent cutting
characteristics offers the best price performance ratio.
FEATURES:
FIXTEC: Disc changing
in seconds, no extra
tools required.
12 seconds from removing the
worn disc to fixing a new disc.
Only 8mm thin, enabling
more surface of disc on
the material.
Compatible
to all
manufacturers angle grinders
up to Ø 150mm with standard
M14 spindle thread.
With
integrated keyholes,
for removal of the nut with a
standard pin spanner in the
event of the nut becoming
too tight.
DISC THICKNESS
Ø MM
MM
41 SCS 41 / 115 115
1
BORE
Ø MM
22.2
TYPE
QTY
50
ID. NO.
4932
371902
EAN CODE
4002395
345281
ID. NO.
4932
490098
EAN CODE
4002395
325917
METAL GRINDING DISCS
FEATURES:
Applications: Sound performance in mild steel
and non-alloy tool steel.
Characteristics: Provides good life time and
efficient grinding characteristics.
TYPE
27
SG 27 / 115
DISC THICKNESS
Ø MM
MM
115
6
BORE
Ø MM
22.2
QTY
25
DESCRIPTION
QTY
Fixtec nut
25
FLAP DISCS
Up to
DISC
Ø MM
GRIT
50 SLC50/115
115
SLC50/125
125
Multigrain
40/60
Multigrain
40/60
TYPE
BAND SAW BLADES
MATERIAL WALL
THICKNESS MM
50%
TYPE
Maximum productivity with
BACKING
BORE
PLATE
Ø MM QTY MATERIAL
Natural
22.2
1
Fibre
Natural
22.2
1
Fibre
DISC
Ø MM
faster material removal
GRIT
50 SLC50/115
115
80
EAN CODE
4002395
SLC50/125
115
120
430407
380688
SLC50/125
125
80
430408
380695
SLC50/125
125
120
ID. NO.
4932
EAN CODE
4002395
371327
2x
BACKING
BORE
PLATE
Ø MM QTY MATERIAL
Natural
22.2
1
Fibre
Natural
22.2
1
Fibre
Natural
22.2
1
Fibre
Natural
22.2
1
Fibre
longer lifetime
ID. NO.
4932
EAN CODE
4002395
430412
380732
430413
380749
430414
380756
430415
380763
Blade length 687mm (M12)
TOOTH PITCH MM
TEETH PER INCH
QTY
ID. NO.
UPC CODE 45242
1.4
18
3
48390572
272341
2.5 to 8
ID. NO.
4932
352473
SAWZALL™ BLADES
BLADE
LENGTH
MM
TOOTH
PITCH
MM
TEETH
PER
INCH
MATERIAL
TYPE
REF.
NO.
QTY
ID. NO.
UPC
CODE
45242
Material wall thickness – mm
300
1.4
18
Bi-Met,Co
–
5
25
48005789
48008789
083107
082438
2 – 8
Ø 10 – 180
2 – 8
2 – 4
300
1.8
14
Bi-Met,Co
–
5
25
48005782
48008782
083060
082391
3 – 10
Ø 10 – 180
3 – 10
3 – 7
•
•
300
2.5
10
Bi-Met,Co
–
5
25
48005712
48008712
083039
082377
4 – 10
Ø 10 – 180
4 – 10
4 – 10
•
•
•
33
HAND TOOLS
METAL SNIPS
Thumb and forefinger slots for increased comfort and less fatigue.
Allows user to push through sheet metal with ease with less
risk of cutting oneself.
Serrated cutting edges prevent slippage when cutting.
Less hand fatigue when cutting thicker materials.
Design with compound leverage action.
Torsion spring opens jaws automatic during cutting for faster
cutting action and less fatigue work.
Chrome plated rust protected forged blades for increased lifetime.
Extra hardened to 65 HRC.
One hand locking mechanism.
Flush slimline design for non-snagging in material.
Triple cutting direction identification – on the head, handle and
by colour coded handle.
Ergonomic and durable overmoulded grips add comfort and
last longer.
1. Aviation snips: for short, straight
and shaped cuts. Ideal for narrow
radius cuts and notch cuts.
Article No.
48224030 / 48224020 / 48224010
1
2. Offset snips: for long continuous straight or 3. Extra long aviation snips:
curved cuts. 45° offset keeps users hand
For longer and straighter
away from the cutting material.
cuts in one go
Article No.
48224032 / 48224022 / 48224012
2
3
Article No.
48224037 / 48224038
FASTBACK FLIP UTILITY KNIFE
ne handed blade opening: user can flip open the blade
O
with one hand for easy activation.
Integrated gut hook: allows users to make cuts without
exposing the blade.
Tool free blade change: less down time in the field for
blade changes.
Wire stripper: eliminates the need to look for another tool
in user’s bag.
Thin body design: tool is easily stored in user’s p
ocket.
Belt clip: for easy storage.
1
2
1. Fastback Knife
2. Fastback Knife with blade storage
UTILITY KNIFE REPLACEMENT BLADES
Iron carbide deposited metal for longer lifetime.
Optimised cutting angle geometry for sharpness.
Extra ground cutting edge for cleaner cuts.
Blades are protected and easily accessible from storage box.
1. General Purpose Blades 2. Carton Blades (rounded)
3. Hook Blades
1
2
3
34
HAND TOOLS
SCISSORS
Iron carbide cutting edge for maximum durability. Longer lifetime vs. stainless steel. Chrome plated blades for maximum rust protection.
All metal core: full metal handle construction to protect from drops and handle breakages.
Bolt lock technology prevents blades from loosening to ensure precision cutting.
Large handle loops for use with gloves.
Index finger groove for more comfort.
Laser etched ruler markings on the blade allows to measure and cut in 1 go.
1. Offset Scissors
2. Straight Scissors
1
2
TORQUE LOCK™ GRIPS
Range: for gripping and clamping material. Ideal for general pipe work.
TORQUE LOCK™: faster setup and more force for locking tools.
Hang hole
Lever release design: traditional release lever for convenience.
Hardened jaws: better grip force on material.
Rust protection: chrome plated tool increases life by reducing corrosion.
1. Curved Torque lockTM grip
2. Flat Torque lockTM grip
3. Flat Long Nose Torque lockTM grip
1
2
3
TORQUE LOCK™ CLAMPS
TORQUE LOCK™: faster set up and easy release when clamping flat and round
materials for welding. Extra force can be applied to the TORQUE LOCK™ screw for
better and more secure grip. Can also be used for hanging / storage purposes.
Hardened jaws: better grip force on material.
Rust protection: chrome plated tool increases life by reducing corrosion.
1. Swivel Pad Torque lockTM grip
1
2. Regular Pointed Torque lockTM grip
STOP LOCK™ CLAMPS
2
STOP LOCKTM: single handed clamp. Maximum holding force in one pressing.
Overmould grip: maximum grip for comfort and performance.
Optimised pad design: non marking swivel pads for clamping on a variety of surfaces.
1. Stop LockTM clamps (50mm jaw capacity)
2. Stop LockTM clamps (100mm jaw capacity)
1
2
35
HAND TOOLS
INKZALL™ MARKER PENS
INKZALL™ MARKERS FEATURE CLOG
RESISTANT TIPS AND THE ABILITY TO WRITE
THROUGH DUSTY, WET OR OILY SURFACES.
Durable acrylic nib is ideal for rough surfaces as OSB. Also suitable
for marking on wood, metal, plastic and ceramics.
Acrylic nib stays sharp longer, doesn’t mushroom or push back under pressure.
Ink dries quickly to reduce smearing. However the INKZALL™ markers don’t dry
out quickly when the cap is left off.
Anti-roll body design for better grip on smooth surfaces.
1. Fine Tip
2. Fine Tip with Stylus
4
3
1
2
QUICK DRY INK
DRIES IN SECONDS
4. Coloured Markers: Pack of four fine tip markers.
3. Chisel Tip
Blue, Red, Green and Black
METRIC & IMPERIAL MAGNETIC TAPE MEASURES
Overmould gripping area for extra comfort and durability
Non reflective blade coating makes the tape
anti-glare and easier to read in bright sunlight
Double sided nylon bond blade protection
for extreme tape durability against dust, dirt, debris and water
5m metric magnetic tape measure
5m/16ft metric & Imperial magnetic
tape measure
8m/26ft metric & imperial magnetic
tape measure
10m/33ft metric & imperial magnetic
tape measure
26" TOOLBOX
Impact resistent construction
Buttressed hinges – for durability
Protected recessed latches
Reinforced corners
Integrated weather seal – protects contents from rain and debris
TOOLBAGS
n Provides extra storage for accessories
n Shoulder strap or dual handle for easy carrying
n Durable zipper closure
1
2
1. Milwaukee® 12" toolbag 2. Milwaukee® 24" toolbag
Article No. 4931416739 Article No. 4931431552
MILWAUKEE® GOES FULL THROTTLE
WIN A NEW 2015
YZF-R1 MILWAUKEE®
RACE REPLICA BIKE
WORTH £25,000!
After 6 years Yamaha have updated their YZF-R1 bike and Milwaukee® are giving one
lucky person the chance to ride into the sunset with this amazing prize. The winner will be
presented with the bike at the last round of the British Superbike Championship 2015 by
the Milwaukee® Yamaha riders and if this was not enough, the first drive of the bike will be
a Pillion ride for the winner with one of the Milwaukee® Yamaha team around the track.
For your chance to enter
this amazing competition,
please enter your details at
www.milwaukeetool.co.uk/
yamahacompetition
MILWAUKEE TOOL
Ground Floor, Unit 3 Globeside Business Park, Fieldhouse Lane, Marlow, Bucks SL7 1HZ
Tel: +44(0) 1628 894400 Fax: +44 (0) 1628 894401
All data incl. service and warranty conditions as well as product range are subject to change without notice. Pictures are not binding.
No liability for printing errors or mistakes. Copyright 2015 - Milwaukee Electric Tool. 4939434798

Automotive Collection 2015

Transcription

Similar documents

NAUTICO UTICO 3 NAUTICO UTICO 3

Charging Lipo Batteries with the Hextronik HX 8080 Charger

318CTB - RCS: Remote Control Solutions

LIFEPAK 500 Maintenance Checklist

Light Options – There are 3 dual LED strips in the

Battery Guide V3

DOS SD-STD-02.01 K12 L3 ASTM F2656 M50 P1

space for research, manufacturing and storage

Priority Start - Postcard.indd

Lambourgini Murcielago Ride On Car Manual