Stanhope-Seta Brochure - Analytical Measuring Systems (Private

Fuels
Product Profile
Biofuels
Petroleum feedstock
Crude oil
Chemicals
Lubricants
Cosmetics
Paints and varnishes
Bitumens
Recycled product
Laboratory instruments
for quality control, analysis and calibration
PRODUCT PROFILE
SETAFLASH SERIES 8 ACTIVECOOL CLOSED CUP TESTER (FLASH/NO FLASH & RAMP MODES)
ASTM D3278; ASTM D3828; ASTM D7236; ASTM E502; IP 523; IP 524; IP 534; IP 303 (obs); ISO 3679; ISO 3680
•
•
•
•
•
•
•
•
•
Flash/noflash&rampmode
Temperaturerangeof-20°Cto130°C(-4to266°F)
Smallsamplesize,2or4ml
CorrosionResistantcupoption
Electricignitor(withgasoption)
Automaticdippingandflashdetection
ActiveCoolelectronicPeltiercooling
64Testmemory&RS232interface
°Cor°Ftemperaturedisplay
SetaPartNo:
TemperatureRange:
82000-0➔
82100-0
Air:10to130°C(50to266°F)
WaterAssisted:-20to130°C(-4to266°F)
RapidEquilibriumandRamp
2or4mlaccordingtomethod
1minute<100°C,2minutes>100°C
FAME1minuteoruserdefined1to99minutes
Typically7minutes
Aluminium
PeltierCell
30x34x38cм/8kg
TestModes:
SampleSize:
TestDuration,
RapidEquilibriumMode:
TestDurationRampMode:
Cupmaterial:
Heating/CoolingMethod:
Size/weight:
82150-0
Air:10to130°C(50to266°F)
WaterAssisted:-20to130°C(-4to266°F)
RapidEquilibriumandRamp
2or4mlaccordingtomethod
1minute<100°C,2minutes>100°C
FAME1minuteoruserdefined1to99minutes
Typically7minutes
Corrosionresistingsteel
PeltierCell
30x34x38cм/8kg
82000-0
Ambient+5to300°C(Ambient+9to572°F)
RapidEquilibriumandRamp
2or4mlaccordingtomethod
1minute<100°C,2minutes>100°C
FAME1minuteoruserdefined1to99minutes
Typically7minutes
Aluminium
CeramicPad,ForcedAir(post-testcooldown)
30x34x38cм/8kg
SETAFLASH SERIES 3 ACTIVECOOL (RAPID EQUILIBRIUM AND RAMP TESTS)
ASTM D3278; D3828; D7236; IP 303 (Obs); IP 523; IP 524; IP 534; ASTM E502; ISO 3679; ISO 3680
•
•
•
•
•
•
33200-2➔
Sub-AmbientTestsandRapidCoolDown
Temperaturerange10to135°C(50to275°F)
RapidEquilibriumandRamptests
CorrosionResistantoption
1MinuteFlash/NoFlashandActualFlashPoint
2/4mlSampleSize
SetaPartNo:
TemperatureRange:
TestModes:
33200-2
10to130°C(50to266°F)
RapidEquilibriumandRamp
33250-2
10to130°C(50to266°F)
RapidEquilibriumandRamp
33000-0
Ambientto300°C
(0to300°Cwith13870-0)
RapidEquilibriumandRamp
30000-0
Ambientto300°C
(0to300°Cwith13870-0)
RapidEquilibrium
SampleSize:
TestDuration,
RapidEquilibriumMode:
RampRate:
Cupmaterial:
Size/weight:
2or4mlaccordingtomethod
1minute<100°C,2minutes>100°C
FAME1minuteoruserdefined1to99minutes
2°C/minramp
Aluminium
26x28x26cm/5kg
2or4mlaccordingtomethod
1minute<100°C,2minutes>100°C
FAME1minuteoruserdefined1to99minutes
2°C/minramp
Corrosionresistingsteel
26x28x26cm/5kg
2or4mlaccordingtomethod
1minute<100°C,2minutes>100°C
FAME1minuteoruserdefined1to99minutes
2°C/minramp
Aluminium
26x28x26cm/4kg
2or4mlaccordingtomethod
1minute<100°C,2minutes>100°C
FAME1minuteoruserdefined1to99minutes
Aluminium
26x28x26cm/4kg
MULTIFLASH AUTOMATIC MULTI-METHOD FLASH POINT TESTERS
PENSKY-MARTENS; ABEL; TAG; SMALL SCALE
•
•
•
•
•
2
HighlyautomatedlowcostModularSystemwithin-builtsafety
Strictconformitytotestmethods
Fastandreliableperformance
GasorElectricIgnition
Temperaturein°Cor°F
34000-0+34100-2➔
SetaModel:
34100-2
34200-0
34400-0
34700-0
Method:
Pensky-Martens
Abel
TAG
SmallScale
ClosedCup
CupType:
ClosedCup
ClosedCup
ClosedCup
Mode:
ProcedureA,B,C,GB/T,Search
NonEquilibrium,Equilibrium,Flash/NoFlash
NonEquilibrium,Equilibrium,Flash/NoFlash
Flash/NoFlash,NonEquilibrium,Search
TemperatureRange:
Ambientto400°C
Ambientto93°C,(5to93°Cwithcooling)
Ambientto93°C,(5to93°Cwithcooling)
Ambientto300°C(-20to300°Cwithcooling)
IgnitionMethod:
ElectricorGas
ElectricorGas
ElectricorGas
ElectricorGas
FlashDetection:
Thermocouple
Thermocouple
Thermocouple
Thermocouple
BathType:
SolidBlock/Air
Liquid/Liquid
Liquid
SolidBlock
PowerRequirement:
115Vor230Vac(switchable)
115Vor230Vac(switchable)
115Vor230Vac(switchable)
115Vor230Vac(switchable)
Size(HxWxD):
34x47x42cm
44x47x42cm
34x47x42cm
34x47x42cm
Weight(inc.Baseunit):
12kg
12kg
12kg
12kg
T
+44 (0) 1932 564391
F
+44 (0) 1932 568363
E
[email protected]
W
www.stanhope-seta.co.uk
PRODUCT PROFILE
12200-3 SETA EXISTENT GUM SOLID BATH
ASTM D381-IP 131; IP 540; BS 2000 Part 131; BS 4348 (obs); ISO 6246; DIN 51 784;
NF M07-004; FTM 791 3302; JIS K2261
•
•
•
•
•
5Teststations
Integralsteamsuperheater
Digitaltemperaturecontrol
140to260°Ctemperaturerange
Flowgaugecalibratedforairandsteam
A SolidBlockBathdesignedtocarryoutuptofivesimultaneoustestsfordetermining
existentgumcontentinfuelsbytheJetEvaporationmethod.
Operatingtemperaturerange:
Heaters:
Over-temperaturecut-out:
Air/Steaminlet:
Size(HxWxD):
Weight:
140to260°C±5°C
2x1kW
280°C(adjustable)
15mmo.dpipe
45x35x50cm
45kg
12200-3➔
81000-2 SETAVAP 2 RAPID AUTOMATIC VAPOUR PRESSURE TESTER
ASTM D5191; IP 409; IP 481; IP 394, EN 13016; Correlates with ASTM D323; D5842; D6378; IP 69; IP 402 (Obs)
•
•
•
•
Multi-Mode-Ptot,DVPE,EPA,Crude,Pabs
FixedLiquid/Vapourratio
“Mini”methodusesonly3mlsamplesize
AutomaticDrainandPurge
Aquickandsimpletouseinstrumentfordeterminingthevapourpressureofgasoline,solvents,lightcrudeoils,and
similarproductsusingthe“Mini”testmethod.
81000-2➔
SetaVap2ishighlyautomatedwithstepbystepinstructionsandpromptsbeingdisplayedonthecontrolpanel.Once
thetestprocedurehasbeenstartedoperatorinterventionisonlyrequiredtoinjectthesampleintothechamber,even
thepurgingandcleaningcycleiscarriedoutautomatically.
TestPressureRange:
UnitsofMeasurement:
ChamberTemperature:
Modes:
PowerRequirement:
Size(HxWxD)/Weight:
0to200kPa±0.5kPa(0.1kParesolution)
kPaorpsi(userselectable)
37.8°C(100°F)±0.1°C
Ptot,DVPE,EPA,Crude,Pabs
115Vacor220Vac(switchable),50/60Hz,70W
37x13x20cm/3.5kg
11860-3 SETASTILL DISTILLATION UNIT
ASTM D86; D216 (obs); D447 (obs); D850; D1078; E133; IP 123; IP 191; IP 195
•
•
•
•
Ambientto400°Cdistillationrange
Adjustableheightheater/flaskplatform
Toughenedglasswindow
Coolingfan
Thedistillationunit,mountedtotheleft,comprisesaflasksupportmechanism,heaterelements,andtheheater
controller.Theflaskissupportedbyadrop-inceramic-glasssupportboardmountedtoaplatformthatisadjustablefor
height.Thequartzenclosedheatingelementsareattachedtotheplatform,andarepoweredbyasolid-stateenergy
regulatorandcalibratedcontrol.Acoolingfanisinstalledintherearofthedistillationunittoreducecoolingtimebetween
distillations.Atoughenedglassobservationwindowisfittedinthefrontofthedistillationunit,andaspillagecollection
traywithoutletismountedbeneaththeheaters.
DistillationRange:
VoltageRange:
Power:
CondenserVolume:
Ambientto400°C
110/120Vor220/240V,50/60Hz(switchable)
1000Wmaximum
7.2litre
Size(HxWxD)/Weight:
CondenserUnit:47x37x25cm,
DistillationUnit:47x21x21cm/12kgtotal
T
+44 (0) 1932 564391
F
+44 (0) 1932 568363
11860-3➔
E
[email protected]
W
www.stanhope-seta.co.uk
3
PRODUCT PROFILE
11400-6 SILVER AND COPPER CORROSION BATH
ASTM D130-IP 154, ASTM D4048, ASTM D4814, BS 2000 Parts 112 & 154, DIN 51 811, EN 2160,
FTM 791 5325, IP 112, IP 227 (obs), IP PM-DJ 2005, JIS K2513, NF M07-015
• Ambient+5°Cto150°Ctemperaturerange
• 9teststations
• Copper/Silvercorrosiontests
11400-6
TheSilverandCopperCorrosionBathisastainlesssteelwateroroilbathdigitallytemperature
controlledto±0.1°Coveratemperaturerangeofambient+5°Cto150°C.
Temperaturerange:
Temperaturestability:
Bathfluid:
Bathcapacity:
WaterInletNozzle:
Overflowdrain:
Ambient+5°Cto150°C
±0.1°C
WaterorOils
35Litres
10mm
10mm
99700-4 SALT CONTENT IN CRUDE ANALYSER
ASTM D3230; IP 265
99700-4
•
•
•
•
•
•
•
Conductivityrange:
0.0to151lb/1000bbl(Res:0.1lb/1000bbl)0.0to
430.0g/m3(Res:0.1g/m3)
-20to150°C(Res:0.1°C)
9voltdcbatteryormainsadaptor
110/120/220/240,50/60Hzadaptorsupplied
20x7x3.5cm
1.6kg
Temperaturerange:
Powersupply:
Size(HxWxD):
Weight(includingcarrycase):
ASTMandIPmethods
Automaticsaltconcentrationcalculation
Pre-calibratedforimmediateuse
2userdefinedcalibrationmodes
RS232interface
Batteryormainsvoltageoperation
Weatherproof
Aportableinstrumentfordeterminingtheapproximatechloride(salts)content
ofcrudeoils.Theinstrumentisprecalibratedandautomaticallycalculatesthe
saltconcentrationing/m3orpoundsperthousandbarrels(ptb)(lb/1000bbl).
MeasurementscanbedisplayedordownloadedtoaPC.Suppliedwithcarrycase,
mainsadaptor,software,RS232cable&instructionmanual.
90000-3 SETA OIL TEST CENTRIFUGE FOR SEDIMENT & WATER IN CRUDE OIL
ASTM D91; D96 (Obs); D893; D1290; D1796; D1966; D2273; D2709;
D4007; IP 75 (Obs); IP 539 (Obs)
•
•
•
•
•
•
•
Specificallydesignedfortestingoils
Heatedchamber,ambientto80°C
Static,nearverticalbucketpositioning
4placeswingoutrotor
Membrane‘touch’controlpanel
Pre-heatfacilitytoensurebowlisattesttemperaturepriortotest
ConformstoIEC1010-1&1010-2-Dsafetyrequirements
Withatemperaturerangeof30to80°Candarotationalspeedofupto3000rpm,
thisheatedchambercentrifugeisspecificallydesignedfortestingoils.Thelarge
diameterchamber,fourplacerotorandcushionedadaptorsallowtheuseofthe
correct6and8inchconical,pear-shapedandtracesedimenttubesasspecified
bythevarioustestmethods.Theswingoutrotorensuresthatthesamplesare
heldnearverticalwhenatrestallowingmoreprecisemeasurementofsediment.
MaximumRCF:
MaximumRPM:
TemperatureRange:
TimerRange:
RotorCapacity:
PowerRequirement:
Size(HxWxD)/Weight:
72.5kg
3000
30to80°C±2°C
1to60minutesin1minutesteps,ContinuousOperation
4Samples
230Vac(110Vtransformeroption)50/60Hz/1kW
40.1x56.41x63.93cm/86kg
90000-3
4
T
+44 (0) 1932 564391
F
+44 (0) 1932 568363
E
[email protected]
W
www.stanhope-seta.co.uk
PRODUCT PROFILE
92000-3 IGNITION QUALITY TESTER (lQT™) - DERIVED CETANE NUMBER ANALYSIS
EN 15195: 2005(E); ASTM D6890; IP 498; Correlates with ASTM D613
•
•
•
•
•
•
AllDieselFuelsandBiodiesel
AutomatedTestProcedure
Small(<100ml)Sample
20MinuteTest
Preciseresults-repeatabilityof0.91,reproducibility2.66@51CN
ApprovedspecificationtestforEN590,ASTMD975,D7467,BS2869
92000-3➔
TheIgnitionQualityTester(IQT)isareliable,affordableandapprovedalternativetoacetaneengine.
Itisafullyautomatedtestinstrumentforderivingthecetanenumberforawiderangeofmiddle
distillatefuelsincludingconventionalandoilsands-baseddiesels,biodiesels,refinerystreams,plus
fuelsusingoxygenateandnitratebasedcetaneenhancers.
MeasuringPrinciple:
InjectionSystem:
Computer:
CompressedGasRequirement:
PowerRequirement:
Size(HxWxD)/Weight:
ConstantVolumeCombustionChamber
PintleType,singleholenozzle,airactuated
PentiumbasedPCwithinterfaceandscreen(supplied)
Air(20.9%O2)forcombustion,Air(IndustrialGrade)for
actuation,Nitrogen(IndustrialGrade)forfueldelivery
120/220Vac@60Hzor220Vac@50Hz
151x98x57cm/125kg
91600-3 SETA MULTI FILTRATION TESTER - PORTABLE TEST FOR
FILTERABILITY/BLOCKING TENDENCY
ASTM D2068; IP 387 (Procedures A, B & C); Correlates with ASTM D6426
NEW IP PM EA/08 Cold Soak Test Method for EN 590 Biofuel and FAME material.
91600-3➔
• Compactandeasytouse
• Resultinlessthan15mins
• InterfaceforPCorPrinter
FilterBlockingTendency(FBT)Range:
FilterabilityQualityFactor(FQF):
MaximumPressure:
PowerRequirement:
Size(HxWxD)/Weight:
TheMFTisauniqueinstrumentdesignedtotesttheFilterBlockingTendency(FBT)and
FilterabilityQualityFactor(FQF)ofdiesel,biodiesel(B100&B5/7/20),gasoil,gasturbinefuel
andkerosine.
1.0to30(lownumberbest)
100to1(highnumberbest)
200kPa
110/120Vacor220/240Vac(switchable)
27x43x26cm/10kg
TestparametersforIP387/D2068andD6426testarepre-programmed.
94100-3 SETA COMPACT CLOUD AND POUR POINT CRYOSTAT FOR COLD FLOW TESTS
ASTM D2500-IP 219, ASTM D5853-IP 441, ASTM D6422, ASTM D97-IP15, BS 2000 Parts 15 & 219, DIN 51
597 (obs), EN 23015, FTM 791 201, ISO 3015, ISO 3016, JIS K2269, NF T60-105
•
•
•
•
3IndividuallyTemperatureControlledCompartments
4AirWellsineachCompartment
LargeTwoLitreCapacityCompartmentsforTemperatureStability
SingleStageCFCFreeRefrigeration
94100-3➔
Thecryostatisequippedwiththreeindividuallytemperaturecontrolledcompartments.Eachtwolitre
compartmentcanaccommodatefourairwells.The94100-3issuppliedwithacompartmentthermometerand
12testjars,eachcomprisinggraduatedglassware,thermometercork,andinsulatinggasketanddisk.Alower
temperature(-51°C)fourcompartmentCloud&PourPointCryostatisalsoavailable,Setapartnumber93531-7.
Setapartno:
TemperatureRange:
NumberandVolumeofCompartments:
TotalNoofTestWells:
CooldownTime:
PowerRequirement:
Size(HxWxD)/Weight:
T
+44 (0) 1932 564391
94100-3
Ambientto-34°C
3compartments,2litreseach
12
1hourapprox.(32to-34°C)
110/120Vacor220/240Vac,50/60Hz,750W
60x60x85cm/115kg
F
+44 (0) 1932 568363
E
93531-7
Ambientto-51°C
4compartments,2litreseach
16
Approx2hrs(from32°Cto-51°C)
110/120V,60Hz220/240V,50Hz/1.8kW
95x63x63cm/115kg
[email protected]
W
www.stanhope-seta.co.uk
5
PRODUCT PROFILE
84200-0 KV6 VISCOMETER BATH
ASTM D2170-IP 319, ASTM D445-IP 71, ASTM D446, BS 188, BS 2000 Parts 71
& 319, DIN 51 366, DIN 51 562, EN 12595, EN 3104, FTM 791 305, ISO 3105, JIS
K2283, NF T60-100, NF T60-136
•
•
•
•
•
•
•
Upto6viscometertubes
50litreoil/waterbath
Temperaturestability±0.01upto100°Cand±0.02between100and150°C
Temperaturerangeambientto150°C
Digitaldisplaywith0.01°Cresolution
Toughenedglassfrontpanel
Integralbacklighting
84000-0
TheSetaKV-6hasa50litretemperaturecontrolledbaththatcanaccommodateup
tosixstandardviscometertubes.Digitaltemperaturecontrolandaninbuiltcoldwater
coolingcoilprovideaccurateandstabletesttemperaturesfromambientto150°C
(±0.01°Cupto100°Cand±0.02°Cbetween100and150°C).Thebathisprotected
bylowliquidlevelandovertemperaturecut-outs.
TemperatureRange:
Ambientto150°C
TemperatureStability:
±0.01°upto100°C±0.02°between100and150°C
TemperatureUniformity:
±0.02°at40and100°C
TubeCapacity:
upto6
Equippedwithatoughenedglassfrontwindow,easilyaccessibledrainvalve,integral
backlighting,topplate,provisionforreferencethermometerandattachments.
BathFluid:
OilorWater
BathCapacity:
50Litres
Size(HxWxD):
56x35x44cm
Weight:
33kg
16960-0 SETA 6 WAY OXIDATION BATH WITH WINDOW + OXFLO
ASTM D943; D2274; D4310; D7462; IP 157; IP 388
•
•
•
•
•
•
Oilbathandoxygenflowcontrolunitusedforquantativeanalysisofthetendencyofoilsandfuels
toformsludge,acidsanddepositswhenexposedtooxygeninthepresenceofmetalliccatalysts
overextendedperiods.
16960-0➔
TemperatureRange:
Stability:
BathCapacity:
Voltage:
Size(HxWxD):
Weight:
6positionoilbath
Reliabledigitalthermostirunit
SetaOxfloControllerandflowmetersincluded
Lowliquidprotection
Overtemperaturecutout
Lighttightviewingwindow
Ambientto120°C
±0.1°C
35litres
110/120V,50/60Hzor220/240V,50/60Hz
Bath:44x35x26cm,OxfloControlUnit:64x36x33cm
Bath:15kg,OxfloControlUnit:11kg
TheseparateOxflocontrolunit(notshown)includesagasinletpressureregulator,pressuregauge
andsixprecisionflowmeterscalibratedforoxygenat3litres/hour,21°Cand0.4barpressure.
Safetyfeaturesincludelowlevelliquidprotectionandovertemperaturecut-outs.
16670-0 SETA OXIDATION SOLID BLOCK BATH - 4 WAY
ASTM D525; IP 40
•
•
•
•
•
4position
Dryblock
Overtemperaturecutout
Smallfootprint
Stability±0.1°C
TheSetaOxiSolidBlockBathisanaluminiumblockbathwithdigitaltemperaturecontrol
thathasbeendesignedtoacceptuptofouroxidationvesselsforcarryingouttests
equivalenttotheIP40/D525testmethod.
16670-0➔
TemperatureRange:
BathType:
MaxNo.ofTestVessels:
Heat-UpTimeto100°C:
6
T
Ambient+5°to100°C
DryBlock
4
80mins
+44 (0) 1932 564391
F
+44 (0) 1932 568363
E
[email protected]
W
www.stanhope-seta.co.uk
PRODUCT PROFILE
99708-0 HAND HELD CONDUCTIVITY METER
ASTM D2624; IP 274
•
•
•
•
•
HigherAccuracyACMeasurement(±2%ofreading)
Conductivityandtemperatureoutputcapability
Storesupto10DataLocations
USBinterfaceforeaseofdatatransfertouser
FullyTemperatureCompensatedMeasurement
Conductivityrange:
Resolution:
TemperatureRange:
Size(HxWxD):
Weight:
0-2000pS/m±2pS/m(±2%ofreading)
0.1pS/m
0-35°C*(±0.1°C)
31x11x10cm
0.5kg
TheSetaHandheldConductivityMeterprovidesanaccurate
andrapidconductivitymeasurementofdistillatefuels;andis
specificallydesignedfortestinglowconductivityfluidssuch
asaviationkerosene,ULSD,homeheatingfuel,Naphtha,and
printingink.
99708-0➔
99708-0
➔
86400-2 PORTABLE FUEL INTEGRITY TEST KIT - RAPID CHECK FOR
CONTAMINATION IN AVIATION FUEL
86400-2
•
•
•
•
SuitableforJetfuelandotherlightdistillatefuels
Multipletestsinsinglekit
Compact,easytocarryrucksack
IdealforshipboarduseforCargoInspectionandassurance
Aselfcontainedkitoftestequipmentforrapiddetectionofcontaminationinfuels.Thekithas
beendesignedtofitintoasmallpurposemaderucksackenablingittobeeasilytransported
totestsiteswhichhaveonlylimitedordifficultaccess.Itisideallysuitedforshipboarduse
providingbothrapidandeasyverificationofproductintegritypriortooff-loading.
Thekitcomprisesof5keyteststhatallowgo/nogotestingoffuels;
•Flashpoint(ASTMD3828)–usingtheSeries3ClosedCupTester,completewith
syringesandportablegassupply
•Density–AnATEXapproveddigitaldensitymeter,IP559
•Conductivity(ASTMD2624)–UsingadigitalconductivitymeterWaterContent-Shell
WaterCapsulesofferdetectionto30ppm(80tests&syringes)
•Digicell–DigitalreadoutofWatercontent,100-3000ppm,200-10000pmand0-10%
(50tests)
SETA REFERENCE & VERIFICATION MATERIALS – SINGLE & MULTI TEST
VERIFICATION MATERIALS
Products: Diesel, Biodiesel, Gasoline, Jet & Lubricating Oil
• VerificationtoASTM/CEN/ISO/IP
• TraceabletoISO9001:2000
• 18MonthValidity
AllSetainstrumentsaremanufacturedtothehighestpossiblestandardstoprovideaccurate,reliableand
repeatableresultsdemandedbymodernlaboratories.Tomaintaintheconfidenceofthosewhousetheresultsitis
is
essentialtocarryoutregularverificationofthoseresultsandalsotomaintainthecalibrationofSetainstruments.
instruments.
TherangeofSetaVerificationMaterialsforfuelstestingincludes;
•
•
•
•
•
SimulatedDistillation(SIMDIS)
WaterdeterminationbyKarlFischer
LubricityofUltraLowSulphurDiesel(ULSD)byHFRR
VapourPressurebyevacuatedchambertest
RefereevaluesforLowSulphurGasolinemeetingASTMandIPtestmethodprotocols
TherangeofSetaVerificationmaterialsincludes‘MultiTest’samples,whichareauniquesecondaryreference
materialthatprovidetraceablevalidationofseveraldifferenttestparametersfromonesourceofsample.
T
+44 (0) 1932 564391
F
+44 (0) 1932 568363
E
[email protected]
W
www.stanhope-seta.co.uk
7
PRODUCT PROFILE
Analytical solutions for
hydrocarbon petroleum products
Seta Analytics provide analytical solutions for Hydrocarbon Petroleum products. It is a division of Stanhope-Seta
which combines long established experience of testing petroleum products with the latest measurement
technologies to provide enhanced analytical solutions for exploration, refining, petrochemical, distribution and
marketing operations.
Current developments include laser based measurement for particle counting, electrochemical sensors for H2S
detection and miniature FTIR technology for low level detection of FAME in Jet Fuels.
H2S Analyser
FIJI - Fame in Jet Instrument
ASTM D7621, IP 570, ISO 8217
Marine Fuel Specification
Rapid Screening to IP 583
London Street
Chertsey
Surrey KT16 8AP
England
T
F
E
W
8
T
+44 (0) 1932 564391
F
+44 (0) 1932 568363
E
[email protected]
W
+ 44 (0) 1932 564391
+ 44 (0) 1932 568363
[email protected]
www.stanhope-seta.co.uk
www.stanhope-seta.co.uk