sytec® - Syfan USA, Corp.

PRODUCT DATA SHEET
sytec
MVP 30
®
Syfan MVP30 is a light weight polyolefin shrink film. Because of the thinner film
MVP30 offers longer roll yields and lower tunnel temperature which translates into cost saving for the client.
This high quality shrink film has excellent clarity with a glossy clear look that enhances product presentation.
SPECIAL FEATURES
• Thinner and Lighter
• Excellent Transparency and Gloss
• Requires Lower Necessary Tunnel Temperature
• Longer Rolls = Reduced Storage Requirements
SHRINK & SEAL PROPERTIES
• User Friendly
• Conforms to Any Product Shape
• Strong Seals
PROPERTY
UNIT
METHOD
VALUES
Density
gr./cm
ASTM D-1505
0.919
Haze
%
ASTM D-1003
4.5
Gloss 45°
%
ASTM D-2459
87
Tensile Strength
N/mm2 Psi
ASTM D-882
MD 100 TD 115
MD 14400 TD 16500
Elongation
%
ASTM D-882
MD 120
TD 110
Shrinkage @ 120°C, oil bath, 5 sec.
%
Syfan Method
MD 77
TD 75
Tearing Resistance
gr./25m
Elmendorf
MD 30
TD 20
3
Coefficient of Friction (Film/Film)
ASTM D-1894
< 0.3
ASTM E-96
0.9
MVTR (60G)
g/100in2/24hr @90%RH 99°F
O2
cc/100in2/24hr 1atm@ 77°F
ASTM D-3985
250
CO2
cc/100in2/24hr 1atm@ 77°F
Gas Chromatograph
1000
MVTR (15mic)
g/m2/24hr @90%RH 37°C
ASTM E-96
11
O2
cc/m2/24hr 1atm@ 25°C
ASTM D-3985
4000
CO2
cc/m2/24hr 1atm@ 25°C
Gas Chromatograph
16000
Syfan USA Corp.
1522 Twin Bridges Road, Everetts, NC 27825
1.877.792.2547 | www.syfanusa.com
GAUGE
30
Yield
in2/lb
95500
Reel Length
SW/ft
17500
CF/ft
8750
SAFETY & ENVIRONMENT
FOOD CONTACT
SYFAN SYTEC SHRINK FILMS contain no CFC’s nor
any residues of the heavy metals Sb, Cr, As, Pb, Ba, Cd, Ag,
Se. The gas generated during sealing of SYTEC SHRINK
FILM is comprised of hydrocarbon derivatives of the pure
raw material and contains no harmful substances, irritants,
or chlorine derivatives.
Sytec® MVP complies with the requirements & regulations
which state that materials may be safely used in food
contact and non-food applications. These specifications
are described in the FDA code Title 21 para. 177.1520
and in the EC Commission Directive No. 90/128/EEC.
SYFAN -SAAD
has been
ISO-9001:2008
certified since
June 1994.
Sytec® MVP should be stored in a cool, dry environment away from
direct sunlight. Maximum storage temperature: 25°C / 77°F.
The above table is based on test data believed to be reliable. Since it
is not possible to anticipate the different and varying conditions under
which SYFAN films may be used, purchasers are advised to carry out
their own tests to determine the suitability of SYFAN products for their
specific purposes
Syfan USA Corp.
1522 Twin Bridges Road, Everetts, NC 27825
1.877.792.2547 | www.syfanusa.com