FLEXcon DataSheet

Pharmaceutical - Authenticity/Security
Protect Copy Holographic Vinyl - Sheet
Label applications for the
pharmaceutical industry are
highly-technical and
heavily-regulated. And, with the
reduction in secondary packaging
such as boxes, there is a growing
need to find innovative ways to
report the necessary FDA and
product information on the product
itself. Pressure-sensitive film is ideal
because it not only meets the
unique performance requirements of
both over-the-counter (OTC) and
ethical pharmaceutical applications,
it also offers many labeling solutions
such as closure/security, prime label
and expanded content options.
Holographic films are ideal for
successfully delivering a highly visible
cost effective method to help guarantee
goods are a genuine brand/product. No
matter what your pharmaceutical
labeling needs
are, you can rely on
pressure-sensitive film for application
success.
For more information on FLEXcon's
pressure-sensitive film solutions for
authenticity/ security contact your
local Sales Representative or our
Product Branding Business Team at
(508) 885-8370.
This image is an example of how FLEXcon products may be used
Product:
Benefits:
●
●
●
VALIDATE® V 240 Silver Protect Copy V-344 94 PRT
PFW
Ideal for overt security measures
Silver Protect Copy pattern repeats every
nine inches in both the machine and
transverse directions
Performance, aggressive permanent
pressure-sensitive adhesives bonds well
to a variety of application surfaces
●
●
●
Backed with a 94 lb. premium grade liner
with excellent layflat qualities and
backside printability
Ideal for manual dispensing
Product suitable for thermal diecutting
Product ID #: FLX028909
Last Modified On: Jan 28 2009 12:00AM
1 FLEXcon Industrial Park, Spencer, MA 01562-2642, Telephone (508) 885-8370 FAX (508) 885-8399
www.FLEXcon.com
VALIDATE® V 240 Silver Protect Copy V-344 94 PRT PFW
PRODUCT DATA
VALUE
TEST METHOD
Physical Properties
Thickness (Mils[microns])
Dimensional Stability (%)
Film
2.4 (61) +/1 10%
Adhesive
0.95 (24-27) +/- 0.1 (3)
Liner
6.7 (170) +/- 10%
MD
0.5
TD
0.5
ASTM D 3652 (Modified for use with
non-tape products)
Applied Shrinkage: 24 hour dwell time on
aluminum panel then 24 hours at 160°F
(71°C)
Adhesion Properties
Ultimate Peel from
Average
Oz/In
(N/m)
Acrylic
80
(880)
Glass
75
(825)
Polypropylene
19
(209)
Stainless Steel
71
(781)
Expected Shear
ASTM D 903 (Modified for 72 hour dwell
time)
ASTM D 3654 Method A
a. 1 hr. dwell
b. 1 sq. in. surface
c. 4 lb. load
Room Temp (hours)
40
Tack (gm/sq cm)
490
Expected Exterior Life
Two years vertical exposure, mid continental North
America
Service Temperature Range
-40°F to 176°F (-40°C to 80°C)
Minimum Application Temperature
50°F (10°C)
Storage Stability
Two years stored at 10°F (21°C) and 50% RH
Product Performance and Suitability
All of the descriptive information, the typical performance data, and recommendations for the use of FLEXcon products shall be used only as a guide and do not reflect the specification or
specification range for any particular property of the product. Furnishing such information is merely an attempt to assist you after you have indicated your contemplated use and shall in no
event constitute a warranty of any kind by FLEXcon. All purchasers of FLEXcon products shall be responsible for independently determining the suitability of the material for the purpose for
which it is purchased. No distributor, salesman, or representative of FLEXcon is authorized to give any warranty, guaranty, or make any representation in addition or contrary to the above.
Last Modified On: 05/26/2016
1 FLEXcon Industrial Park, Spencer, MA 01562-2642, Telephone (508) 885-8370 FAX (508) 885-8399
www.FLEXcon.com