ru-200 roofing underlayment - WaterBlock® Building Systems

Comments

Transcription

ru-200 roofing underlayment - WaterBlock® Building Systems
®
rev. 08-17-10
supercedes. 02-04-10
TECH DATA
RU-200 ROOFING UNDERLAYMENT
Product Description
WaterBlock® RU-200 is a premium roofing
underlayment that delivers exceptional long term
weather barrier performance compared to both
traditional asphalt felt products and other
synthetic underlayments.
WaterBlock® RU-200 is a 100% synthetic
underlayment with slip-resistant coatings on both
sides. The bottom is designed to reduce slippage
between the underlayment and the roof sheathing.
The textured top side contains a rubberized
polyolefin coating offering unsurpassed slip
resistance. The unique, patent pending, feature
provides a more secure and safer work surface.
Availability
FEATURES
Sizes:
• 7x lighter than 30# felt
• 20x stronger than 30# felt
• UV resistant
• Slip resistant surface
• 5x more coverage than a typical 30# felt roll
• Preprinted lap lines and fastening points
• Will not support mold growth, rot, or dryout as it contains no asphalt.
45” x 266’ 8” (10 squares)
Approx. net coverage 9.20 squares w/4” laps
45” x 115’ 2” (4 squares)
Approx. net coverage 4.32 squares w/4” laps
Health and Safety
Please refer to the MSDS for First Aid Information.
Most current MSDS’s can be found on the
WaterBlock website at www.waterblocksystems.com
or call customer service at 1-888-610-2151.
Warranty (25 year limited)
Please refer to the warranty on our website at
www.waterblocksystems.com for more detailed
information on our 25 year limited warranty.
Manufacturer
International Building Components, Inc.
21428 Woods Creek Road
Monroe, WA, 98272 USA
Telephone - (360)794.2151
Fax - (360)863.8434
Toll Free - 1.888.610.2151
Web - www.waterblocksystems.com
Properties
Properties
Standards
Grab Tensile
Strip Tensile (N/5cm)
Tensile Elongation
Tensile Strength (N/5cm)
Tongue Tear
Trapezoidal Tear
Mullen Burst
Moisture Vapor Transmission
Nail Seal Ability
Pliability
Water Bonding
Low Temp Flexibility
Puncture
ASTM D5034-95
ASTM D5035-95
ASTM D5035-95
ASTM D828-97
ASTM D2261-96
ASTM D4533-04
ASTM D3786-01
ASTM E96-00
ASTM D1970-01
ASTM D146-04
CAN/CSA A220.1
ASTM D1970-01
T803
UV Weathering
UV stabilizer added to coating for improved UV Resistance
Warp 170 lb 756 N / Weft 130 lb 578 N
Warp 120 lb/in (1052) / Weft 85 lb/in. (745)
Warp 20% / Weft 20%
Warp 108 lb/in (950) / Weft 74 ilb/in. (650)
Warp 55 lb 244 N / Weft 50 lb 222 N
Warp 55 lb 244 N / Weft 45 lb 222 N
250 psi 1725 kPa
0.06 perms (0.41 g/day-m2)
Pass
No Cracking (Pass)
No Dripping (Pass)
No Cracking
5.5 Joules
Installation
Please view the RU-200 brochure (available online) for the installation instructions.
the leader in INNOVATIVE CONSTRUCTION PRODUCTS
Toll Free 1-888-610-2151 | www.waterblocksystems.com
Page 1 / 1

Similar documents