AIR-COOLED CONDENSING UNITS with BITZER COMPRESSORS
Transcription
AIR-COOLED CONDENSING UNITS with BITZER COMPRESSORS
bn-CUBZTB April 2011 air-cooled condensing units with Bitzer Compressors Technical Guide Table of Contents Floating Tube™ Coil Options Limitizer® Bitzer Compressor Features and Benefits 3 4-5 6 7-8 Horizontal Air Discharge Condensing Units 4 to 13 HP Standard and Optional Features 9 Nomenclature 9 Performance Data Medium Temperature - R-404A/R-507 Low Temperature - R-404A/R-507 10 10 Electrical Data Medium Temperature - R-404A/R-507 Low Temperature - R-404A/R-507 11 11 Specifications and Dimensional Data Medium Temperature - R-404A/R-507 Low Temperature - R-404A/R-507 12 12 Vertical Air Discharge Condensing Units 13 to 50 HP, Single Compressor Standard and Optional Features 13 Nomenclature 13 Performance Data Medium Temperature - R-404A/R-507 Low Temperature - R-404A/R-507 14 15 Electrical Data Medium Temperature - R-404A/R-507 Low Temperature - R-404A/R-507 16 16 Specifications and Dimensional Data Medium Temperature - R-404A/R-507 Low Temperature - R-404A/R-507 17 17 Vertical Air Discharge Condensing Units 26 to 100 HP, Dual Compressor Standard and Optional Features 18 Nomenclature 18 Performance Data Medium Temperature - R-404A/R-507 Low Temperature - R-404A/R-507 19 20 Electrical Data Medium Temperature - R-404A/R-507 Low Temperature - R-404A/R-507 21 21 Specifications and Dimensional Data Medium Temperature - R-404A/R-507 Low Temperature - R-404A/R-507 22 22 2 © 2011 Heatcraft Refrigeration Products, LLC Single And Dual Compressor Condensing Units Feature Our Floating Tube™ Coil Design Expanded (Locked) Auxiliary Tubes: These tubes support the coil with fins and refrigerant carrying tubes. They do not carry refrigerant and are tightly fitted on end supports and center supports. Free Floating Circuited Coil Tubes: These tubes carry refrigerant and never touch and sheet metal (end supports and center supports). All units include a limited Five Year Warranty against condenser leaks at tube sheets and center supports. All condensers use the Floating Tube™ coil design to eliminate refrigerant leaks at the tube sheets. Additional tubes are added to the condenser coil. These tubes are expanded into the aluminum fins and condenser tube sheets. These anchor tubes support the weight of the coil, but are not a part of the refrigerant circuit. The tubes in the refrigerant circuit are expanded into the fins, but “float” through oversized holes in the tube sheets. Tube sheet leaks are virtually eliminated, since the tubes which carry refrigerant never come in contact with the tube sheet. 3 Options E Solutions branded products and options are designed to exceed current energy and environmental standards. It is our commitment in environmental innovation to dedicate ourselves by delivering energy efficient eco-conscious choices. Products included in the E Solutions portfolio reduce costs, improve bottom lines, and enhance equipment performance and service life. The Beacon II™ Refrigeration System with Smart Defrost, and the factory-installed Smart Defrost Kit™ are E Solutions options that will optimize your savings and increase energy efficiency. Available with Beacon II™ ™ Beacon II™ is the next generation of Bohn’s patented, preassembled, factory installed refrigeration system featuring an integrated microcomputer-based electronic control board. The Beacon II™ systems come completely factory installed, wired and tested saving you time and money. Beacon II™ offers: • • • • • • Complete factory installation, wiring and testing which saves time and money Simple field electrical connections and 24 volt wiring between condensing and evaporator units Preset factory superheat allowing the system to run more efficiently and reducing future adjustments Monitors and controls box temperature, evaporator superheat, condenser fan cycling on two fan units, system status and defrost from outside the box Monitor and make system changes remotely via modem and exclusive Beacon II™ Smart II software Data logging capabilities with Smart Controller Beacon II™ Smart Controller Beacon II™ Smart Controller is an optional system monitoring and programming control device. It allows for adjustments to be made at the push of a button from a conveniently mounted location. The Beacon II™ Smart Controller also allows you to monitor and make changes to the refrigeration system via modem connection from anywhere in the world. The Beacon II™ has been updated to allow the user to make even more precise adjustments than the original Beacon’s Smart Controller. One Smart Controller can program and control up to four separate condensing units with up to four evaporators on each system. That’s more control in your hands! 4 Beacon II™ Smart II Software Beacon II™ Smart II Software makes it easy to adjust and monitor one or more refrigeration systems as well as capture minute by minute system conditions. This Windows-based software allows you to connect to the Beacon II™ Smart Controller from anywhere in the world to monitor the systems, make adjustments and log minute by minute system conditions. This data logging capability is critical in the food service industry. Beacon II™ Smart Defrost The Beacon II™ Smart Defrost, available only on the Beacon II™ Smart Controller, enables the Beacon II™ system to sense frost accumulation and initiates defrost only when it is necessary. To begin, preset defrost times using the Beacon II™ Smart Controller. At each scheduled defrost time, Smart Defrost checks system performance to see if a defrost is necessary. If not, it simply does not defrost, waiting until the next scheduled defrost time. Smart Defrost Kit™ The factory installed Smart Defrost Kit (SDK) skips unnecessary defrosts in commercial, electric defrost walk-in refrigeration systems saving energy, reducing costs and ultimately improving product integrity. The SDK is available as a factory-installed option on all condensing units. 5 LIMITIZER® The Need For Head Pressure Control Refrigeration condensing units must efficiently perform at varying ambient conditions. A properly sized unit will adequately perform at even the highest summer ambient temperatures. However, in situations where the system must operate the majority of the time at less than design temperature, a means of providing adequate head pressure for refrigerant flow is desirable. The Bohn Limitizer® System The Limitizer® system is a factory assembled system utilizing a Limitizer® control to maintain a constant head pressure at the air cooled condensing unit during all climatic conditions when the ambient temperature drops below 75°F (typical). When the ambient is above 75°F, the condenser pressure is above the Limitizer® valve setting and therefore, the valve remains in the full open position. As the temperature drops below 75°F, the pressure at the condenser also drops below the setting of the Limitizer® valve. The Limitizer® valve, sensing the reduction in condensing pressure, modulates toward the closed position, thus restricting the flow of liquid from the condenser. The liquid backs up into the condenser and floods a portion of the tubes, thus reducing the overall capacity of the condenser. The Limitizer® valve will continue to flood the condenser until the pressure setting has been reached, thus providing proper head pressure at all ambient temperatures. 6 While the condenser floods, a second line pressurizes the receiver through another valve. Therefore, the refrigerant flow from the condenser to the receiver modulates with conditions. However, the bypass from the discharge line maintains a minimum receiver pressure. These valves are adjustable and the minimum receiver pressure may be reset higher or lower depending upon application situations of a particular job. The Limitizer® system uses this two-valve, adjustable design. Bitzer Compressors Features and Benefits Bitzer is the world’s largest manufacturer of semi-hermetic refrigeration compressors over 3 HP. In business since 1934, Bitzer has manufacturing plants in Germany, Brazil, Portugal, China and the United States and operates in over 100 countries around the world. Bitzer’s Georgia plant manufactures a complete range of semi-hermetic compressors from 3 to 50 HP. Bitzer provides aftermarket support through wholesalers and also provides 24-hour replacement service from its seven distribution warehouses located across the U.S. Bitzer Offers: • • • • • • • 1-Year Warranty Unloader Heads Standard on All 4 & 6-cylinder Models Dual Voltage Control Modules on All Models Dual Voltage Compressors (6 to 50 HP) Lowest Sound Levels in their Class (Built-in Mufflers) Superior Lubrication and Low Oil Circulation Rates German Engineering / Built in America Bitzer Standard Execution POE Oil Charge Octagon 4C Models 4B & 6B Models √ √ Protective Dry-Nitrogen Charge √ √ Suction & Discharge Service Valves √ √ Dual Voltage INT Protection Modules √ √ Terminal Box Enclosure Class IP65 √ √ Unloader Heads √ √ Patented Internal Mufflers √ √ Centrifugal Oil System √ √ Conventional Oil Pump √ √ 4C Models 4B & 6B Bitzer Options Mounting Hardware (Spring Kits) √ √ Hard Mount Kits √ √ Optical Oil Sensor √ √ Crankcase Heaters √ √ Unloader Stems / Coils √ √ Head Fans and Brackets √ √ Delta P II Differential Oil Pres. Switch √ √ Bitzer Quiet!!! Bitzer compressors are famous for their low sound levels. We change capacities within a frame size by changing our bore diameters rather than the length of the piston strokes. This gives our compressors an unsurpassed balance and precision that translates to low decibels. In addition, Bitzer compressors have a muffler built into each head (see photo) that eliminates pulsations and reduces the sound levels even further. 7 Bitzer Compressors Features and Benefits Octagon® 4C Models Bitzer Octagon 4C Models are rated from 3 to 20 HP. This rugged, compact series utilizes wear resistant drive gear with PTFE coated bearings for especially low friction, aluminum pistons of optimized geometry, connecting rods with eccentric straps and generously dimensioned bearing surfaces. Bitzer’s centrifugal lubrication system eliminates the need for an oil pump and provides optimum oil supply to the compressor even under extreme operating conditions. Centrifugal Lubrication The centrifugal lubrication design employs a solid metal disc mounted to the crankshaft (see cut-away) that distributes oil into a reservoir at the end of the shaft. The oil then flows through the shaft to the bearing surfaces. Bitzer offers an optional Optical Oil Sensor (See OLC-K1 photo below) that mounts to the outer cover of the compressor and monitors oil level by means of an infrared light. OLC-K1 Operating Principle The OLC-K1 sensing device shines an infrared light into the oil reservoir. If oil is present, the light is absorbed and the compressor runs normally. If no oil is present, the light reflects on the sensor, and the compressor shuts off. Bitzer 4B & 6B Models Bitzer 4B through 6B Models are rated from 13 to 50 HP. This series features surface hardened crank shafts, low friction bearings, aluminum pistons, hard chrome plated piston rings and special wrist pin bearings. The 4B & 6B models have a sealed main bearing and generously sized oil pump. Our patented oil return system ensures complete lubrication while reducing oil circulation into the system. Efficient capacity control is provided by unloader banks that can significantly reduce energy consumption. 8 Horizontal Air Discharge Condensing Units 4 to 13 HP • • • • • • • • • • • • • • • • • • • • Floating Tube™ coil design Rifled copper condenser tubing Designed for use with R-404A, R-507 Prebent copper tubes minimize welded joints on internal piping Fixed high and adjustable low pressure controls. Oil safety control Head pressure control valve Bitzer compressors with POE oil Spring mounted compressor with suction and discharge vibration eliminators Crankcase heater Thermally protected, permanently lubricated ball bearing condenser fan motors Separate subcooling circuit in condenser for added capacity and vapor-free liquid Pressure relief valve on receiver Sealed liquid line filter drier and sight glass Electrical controls, including compressor contactor and optional defrost control, are located in easily accessible control box with a hinged cover Service Mate™ module to assist troubleshooting Pumpdown Switch Cabinet is constructed from prepainted galvanized steel Base valve and high & low pressure taps on outside of unit Vertical receivers Horizontal Discharge Standard and Optional Features Factory-Installed Options • • • • • • • • • • • • • • • • • • • • • • • • • • • • Oversized receiver Replaceable core liquid filter drier Liquid line solenoid valve Suction filter Replaceable core suction filter Suction accumulator Oil separator Air defrost timer Electric defrost kits, including timer, evaporator fan contactor with fusing, defrost heater contactor(s), lockout relay and terminal strip Fusing for defrost kits Evaporator holdout relays for systems with multiple electric defrost evaporators Low ambient kit with heated and insulated receiver with time delay Fused disconnect switch Non-fused disconnect switch Phase-loss monitor Manual-reset high pressure switch Anti-short cycle timer Compressor circuit breakers Condenser fan cycling Coated condenser coils Copper finned coil Beacon II™ compatible Hail guards (shipped loose) Compressor unloading NEMA contactors 12" extended legs for snowbelt region (shipped loose) Slanted louver for snowbelt regions (shipped loose) Dual pressure control Nomenclature B B T 0000 L 6 C Brand Compressor Application Horsepower Temp. Range Refrigerant Voltage B = Bohn B = Bitzer 0401 - 4 0551 - 5 0601 - 6 0611 -6 0751 - 7.5 0901 - 9 1001 - 10 1201 - 12 1301 - 13 M = Med. Temp. L = Low Temp. 6 = R-404A, R-507 T = Outdoor N = Indoor S = Beacon II™ C = 208-230/3/60 D = 460/3/60 E = 575/3/60 9 Performance Data Medium Temperature R-404A/R-507 3 - 22 Horizontal HP Condensing Discharge Units Unit Model Number Compressor Model BB*0551M6 4C0969SH BB*0751M6 4C1145SH BB*0901M6 4C1385SH BB*1001M6 4C1480PH Suction Temp. °F 40 30 25 20 15 5 40 30 25 20 15 5 40 30 25 20 15 5 40 30 25 20 15 5 Low Temperature R-404A/R-507 Unit Model Number Compressor Model BB*0401L6 4C0969SL BB*0551L6 4C1145SL BB*0601L6 4C1385SL BB*0611L6 4C1480PL BB*0751L6 4C1761PL BB*1001L6 4C2067PL BB*1201L6 4C2397PL BB*1301L6 4B2707PL Suction Temp. °F 0 -10 -15 -20 -30 -40 0 -10 -15 -20 -30 -40 0 -10 -15 -20 -30 -40 0 -10 -15 -20 -30 -40 0 -10 -15 -20 -30 -40 0 -10 -15 -20 -30 -40 0 -10 -15 -20 -30 -40 0 -10 -15 -20 -30 -40 *= T for Outdoors, N for Indoors, S for Beacon II™ Consult factory on all models for applications above 110°F ambient. 10 90°F Amb. 95°F Amb. 100°F Amb. 110°F Amb. 89700 75460 68740 62260 56190 45520 105280 88720 80750 72780 65640 53140 129090 108780 99120 89850 81200 65960 137470 115200 104860 94930 85670 69300 85620 72064 65580 59360 53510 43270 100690 84739 76660 69360 62500 50500 124130 101623 94750 85870 77500 62760 131010 107509 100040 90550 81560 65840 81720 68710 62440 56460 50870 41170 95530 80270 72960 65960 59380 47880 118700 99390 90440 81860 73800 59840 125080 105430 95260 86090 77450 62560 74280 62010 56230 50730 45720 36550 86960 72380 65640 59210 53160 42700 107220 90050 81730 76750 66340 53950 113750 94630 85740 77130 69510 55590 90°F Amb. 95°F Amb. 100°F Amb. 110°F Amb. 35200 27690 24440 21520 17090 15030 42930 33890 29880 26310 20960 18450 52890 41590 36690 32320 25910 22910 56010 43740 38540 33870 26730 23080 68040 53710 47320 41590 32760 28200 78200 61470 54150 47560 37620 32550 93390 74920 64440 56560 44620 38400 105360 83410 73740 65040 51830 45050 33380 26222 23040 20210 16000 14090 40770 32073 28200 24770 19650 17320 50250 39334 34580 30410 24260 21500 52610 41241 36230 31750 24980 21650 64570 50780 44580 39080 30720 26530 74200 58050 51030 44700 35240 30500 88580 69208 60680 53090 41750 36060 100530 79221 69890 61530 48880 42600 31560 24690 21620 18930 14930 13200 38600 30230 26510 23230 18370 16240 47530 37070 32480 28510 22630 20090 49660 38770 33910 29680 23280 20230 61090 47800 41840 36600 28700 24910 70160 54740 47940 41880 32860 28620 83830 65150 56890 49680 38850 33630 95590 75110 66030 58040 45950 40250 28020 21680 18870 16460 12820 11330 34290 26620 23190 20270 15830 14010 42230 32610 28460 24810 19540 17370 43790 33850 29460 25640 19980 17430 54180 41660 36480 31870 24750 21590 63210 48110 41820 36370 28310 24710 74420 57070 49580 43080 33170 28760 85790 66870 58590 51230 40350 35390 Electrical Data Voltage Supply ^ Unit Model Number Compressor Model BB*0551M6C BB*0551M6D BB*0551M6E BB*0751M6C BB*0751M6D BB*0751M6E BB*0911M6C BB*0911M6D BB*0911M6E BB*1001M6C BB*1001M6D BB*1001M6E 4C0969SH 4C0969SH 4C0969SH 4C1145SH 4C1145SH 4C1145SH 4C1385SH 4C1385SH 4C1385SH 4C1480PH 4C1480PH 4C1480PH Condenser Fan Motors Compressor Beacon II™ or Air Defrost 60 Hz RLA LRA Qty. HP FLA MCA 208-230/3 460/3 575/3 208-230/3 460/3 575/3 208-230/3 460/3 575/3 208-230/3 460/3 575/3 26.5 12.8 8.3 29.0 13.8 10.3 32.7 16.3 13.1 38.5 19.2 15.4 163.0 66.5 48.0 215.0 88.0 63.5 215.0 88.0 63.5 222.0 111.0 89.0 2 2 2 2 2 2 2 2 2 2 2 2 1/3 1/3 1/3 1/3 1/3 1/3 3/4 3/4 3/4 3/4 3/4 3/4 5.4 3.8 2.4 5.4 3.8 2.4 8.8 4.4 3.6 8.8 4.4 3.6 38.5 19.8 12.8 41.7 21.1 15.3 49.7 24.8 20 56.9 28.4 22.9 † MOP †† 60 30 20 70 35 25 80 40 30 90 45 35 Remote Loads ‡ Electric Defrost Evap. Defrost System System Fan Heater MCA† MOP†† Amps Amps Contact Factory for System Electrical Ratings Low Temperature – R-404A/R-507 Voltage Supply ^ Unit Model Number Compressor Model BB*0401L6C BB*0401L6D BB*0401L6E BB*0551L6C BB*0551L6D BB*0551L6E BB*0601L6C BB*0601L6D BB*0601L6E BB*0611L6C BB*0611L6D BB*0611L6E BB*0751L6C BB*0751L6D BB*0751L6E BB*1001L6C BB*1001L6D BB*1001L6E BB*1201L6C BB*1201L6D BB*1201L6E BB*1301L6C BB*1301L6D BB*1301L6E 4C0969SL 4C0969SL 4C0969SL 4C1145SL 4C1145SL 4C1145SL 4C1385SL 4C1385SL 4C1385SL 4C1480PL 4C1480PL 4C1480PL 4C1761PL 4C1761PL 4C1761PL 4C2067PL 4C2067PL 4C2067PL 4C2397PL 4C2397PL 4C2397PL 4B2707PL 4B2707PL 4B2707PL Condenser Fan Motors Compressor 60 Hz RLA LRA Qty. HP FLA 208-230/3 460/3 575/3 208-230/3 460/3 575/3 208-230/3 460/3 575/3 208-230/3 460/3 575/3 208-230/3 460/3 575/3 208-230/3 460/3 575/3 208-230/3 460/3 575/3 208-230/3 460/3 575/3 16.7 9.0 7.0 19.4 10.6 8.7 24.9 14.2 10.8 24.4 12.2 9.6 28.2 14.1 12.2 34.6 17.3 14.4 39.7 19.9 15.9 43.6 21.8 17.3 142.0 58.0 51.5 163.0 66.5 48.0 215.0 88.0 63.5 150.0 75.0 60.0 180.0 90.0 72.0 222.0 111.0 89.0 252.0 126.0 101.0 294.0 147.0 117.0 1 1 1 1 1 1 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 1/3 1/3 1/3 1/3 1/3 1/3 1/3 1/3 1/3 1/3 1/3 1/3 1/3 1/3 1/3 1/3 1/3 1/3 3/4 3/4 3/4 3/4 3/4 3/4 2.7 1.9 1.2 2.7 1.9 1.2 5.4 3.8 2.4 5.4 3.8 2.4 5.4 3.8 2.4 5.4 3.8 2.4 8.8 4.4 3.6 8.8 4.4 3.6 Beacon II™ or Air Defrost Remote Loads ‡ MCA† MOP†† Electric Defrost Evap. Defrost System System Fan Heater MCA† MOP†† Amps Amps 23.6 13.2 10.0 27.0 15.2 12.1 36.5 21.6 15.9 35.9 19.1 14.4 40.7 21.4 17.7 48.7 25.4 20.4 58.4 29.3 22.5 63.3 31.7 25.2 40.0 20.0 15.0 45.0 25.0 20.0 60.0 35.0 25.0 60.0 30.0 20.0 60.0 35.0 30.0 80.0 40.0 30.0 90.0 45.0 35.0 100.0 50.0 40.0 Contact Factory for System Electrical Ratings *= T for Outdoors, N for Indoors, S for Beacon II™ ^ Consult factory for 50Hz applications. † MCA = Minimum Circuit Ampacity †† MOP = Maximum Overcurrent Protection ‡ Condensing unit data plate ratings will be based on actual system match. 11 Horizontal Discharge Medium Temperature – R-404A/507 Specifications and Dimensional Data 3 - 22 Horizontal HP Condensing Discharge Units Medium & Low Temperature – R-404A/R-507 Unit Model Number Compressor Model HP BB*0551M6 BB*0751M6 BB*0901M6 BB*1001M6 BB*0401L6 BB*0551L6 BB*0601L6 BB*0611L6 BB*0751L6 BB*1001L6 BB*1201L6 BB*1301L6 4C0969SH 4C1145SH 4C1385SH 4C1480PH 4C0969SL 4C1145SL 4C1385SL 4C1480PL 4C1761PL 4C2067PL 4C2397PL 4B2707PL 5.5 7.5 9.0 10.0 4.0 5.5 6.0 6.5 7.5 10.0 12.0 13.0 Refrigerant Line Connections (OD) Receiver Capacity @ 90% full (lbs.) Liquid Suction STD OPT Length Width Height Approx. Net Wt. (lbs.) 5/8 5/8 7/8 7/8 1/2 1/2 5/8 5/8 5/8 5/8 7/8 7/8 1 3/8 1 3/8 1 5/8 1 5/8 1 1/8 1 1/8 1 3/8 1 3/8 1 3/8 1 3/8 1 5/8 1 5/8 67 67 67 67 28 28 67 67 67 67 67 67 78 78 87 87 52 52 78 78 78 78 87 87 36-3/4 36-3/4 41-3/4 41-3/4 36-3/4 36-3/4 36-3/4 36-3/4 36-3/4 36-3/4 41-3/4 41-3/4 63-3/4 63-3/4 75-1/8 75-1/8 51-3/4 51-3/4 63-3/4 63-3/4 63-3/4 63-3/4 75-1/8 75-1/8 39-1/4 39-1/4 48-3/4 48-3/4 39-1/4 39-1/4 39-1/4 39-1/4 39-1/4 39-1/4 48-3/4 48-3/4 823 862 993 1,101 595 645 775 865 935 1,000 1,082 1,173 Dimensions (inches) *= T for Outdoors, N for Indoors, S for Beacon II™ One Fan Condenser Two Fan Condenser LEFT SIDE FRONT Height Length 12 Width Vertical Air Discharge Condensing Units 13 to 50 HP Single Compressor Standard and Optional Features • • • • • • • • • • • • • • • • • • • The Floating Tube™ coil design. Refrigerant-carrying copper tubes do not contact any metal support sheets; instead, the coil is constructed with expanded anchor tubes that support the coil construction and do not carry refrigerant. The coil design eliminates one of the major causes of leaks in refrigeration systems Limited five-year warranty against condenser tube sheet and center support leaks Designed for use with R-404A, R-507 Prebent copper tubes minimize welded joints on internal piping All sweat type connections, no flare joints to leak Fixed high pressure switch eliminates capillary tubes Oil safety control Bitzer compressors with POE oil Spring mounted compressor with suction and discharge vibration eliminators Crankcase heater Thermally protected, permanently lubricated ball bearing condenser fan motors Separate subcooling circuit in condenser for added capacity and vapor-free liquid Receivers are sized for sufficient pumpdown capacity with inlet and outlet service valves Pressure relief valve on receiver Sealed liquid line filter drier and sight glass Electrical controls, including compressor contactor and optional defrost control, are located in easily accessible control box with a hinged cover Service Mate™ module to assist troubleshooting Pumpdown Switch Cabinet is constructed from prepainted galvanized steel Convenient access panels for easy servicing to internal components Factory-Installed Options • • • • • • • • • • • • • • • • • • • • • • Compressor unloading Replaceable core liquid filter drier Liquid line solenoid valve Suction filter Replaceable core suction filter Suction accumulator Oil separator with discharge line check valve Air defrost timer Electric defrost kits, including timer, evaporator fan contactor with fusing, defrost heater contactor(s), lockout relay and terminal strip Fusing for defrost kits Evaporator holdout relays for systems with multiple electric defrost evaporators Low ambient kit with heated and insulated receiver with time delay Fused disconnect switch Non-fused disconnect switch Phase-loss protection Manual-reset high pressure switch Anti-short cycle timer Compressor circuit breakers Condenser fan cycling (standard on BDVS) Three-way heat reclaim valve (n/a on BDVS) Coated condenser coils for protection against corrosion in harsh environments Beacon II™ compatible Nomenclature B Brand B = Bohn L Head Pressure Control L - Limitizer® D - Beacon II™ V 000B L 6 C Airflow Horsepower Temp. Range Refrigerant Voltage V = Vertical VS = Vertical Beacon 130B - 13 150B - 15 200B - 20 220B - 22 250B - 25 300B - 30 330B - 33 350B - 35 400B - 40 500B -50 M = Med. Temp. L = Low Temp. 6 = R-404A, R-507 C = 208-230/3/60 D = 460/3/60 E = 575/3/60 13 Single Vertical Air Discharge Condensing Unit • Performance Data Medium Temperature – R-404A/R-507 Unit Model Number Compressor Model Single Vertical Air Discharge Condensing Unit B*V*150BM6 4C2067PH B*V*200BM6 4C2397PH B*V*220BM6 4B2707PH B*V*250BM6 4B3139PH B*V*300BM6 4B3604PH B*V*330BM6 6B4060PH B*V*350BM6 6B4709PH B*V*400BM6 6B5406PH B*V*500BM6 6B6462PH B*V = BLV is Limitizer®, BDVS is Beacon II™ Suction Temp. °F Notes: For 50 cycle capacity, multiply values by .86 14 40 30 25 20 15 5 40 30 25 20 15 5 40 30 25 20 15 5 40 30 25 20 15 5 40 30 25 20 15 5 40 30 25 20 15 5 40 30 25 20 15 5 40 30 25 20 15 5 40 30 25 20 15 5 90°F Amb. 95°F Amb. 100°F Amb. 110°F Amb. 197120 165780 150650 136230 122680 98790 230460 192070 174410 157400 141810 113840 254200 212600 193960 175330 157850 127090 291480 245260 222450 201510 181830 146820 339410 284940 259200 235080 211960 171290 385050 321570 292920 263780 237640 190700 438780 369160 335750 303260 273630 220740 505840 425630 388520 352010 317530 256880 592370 501120 457060 414850 375030 304620 188290 157400 143110 129380 116550 93540 219760 183360 166320 150000 134810 107790 244040 204700 185270 167820 150960 121320 279820 234460 213660 193150 173860 140070 324930 273150 248290 225050 202640 163320 368290 308190 279790 252590 227190 181990 421120 353880 321530 290650 261560 210580 483740 408880 371110 336760 303520 245160 567970 479900 437280 396510 357970 290190 178750 150410 132640 123010 110440 88070 209960 175590 158250 142470 127880 101800 232880 195360 177330 160390 144070 115590 268270 225090 203930 184500 165980 133380 311370 261580 237590 214940 193290 155450 352830 296110 267620 241230 216720 173230 401770 338590 306610 277520 249500 200500 463250 391180 354990 321570 289520 233350 543770 485690 417510 378160 341040 275780 162020 134650 121880 109570 98170 77590 191380 157870 142410 127770 113890 89390 213790 177890 161290 145490 130340 103770 243980 204400 185400 167350 150090 119580 285650 238360 215910 194800 174680 139050 323590 268900 243190 218990 195850 155250 368420 307100 278580 251470 225500 179780 424260 355120 322990 291390 261700 209240 494050 415900 378430 341770 307300 246360 Performance Data Unit Model Number Compressor Model B*V*130BL6 4B2707PL B*V*150BL6 4B3139PL B*V*200BL6 4B3604PL B*V*220BL6 6B4060PL B*V*250BL6 6B4709PL B*V*300BL6 6B5406PL B*V*400BL6 6B6462PL Suction Temp. °F 0 -10 -15 -20 -30 -40 0 -10 -15 -20 -30 -40 0 -10 -15 -20 -30 -40 0 -10 -15 -20 -30 -40 0 -10 -15 -20 -30 -40 0 -10 -15 -20 -30 -40 0 -10 -15 -20 -30 -40 90°F Amb. 95°F Amb. 100°F Amb. 110°F Amb. 105960 81650 70890 61310 46800 39880 123250 95940 83810 73030 56580 48750 141040 110120 96260 83860 64670 55050 156330 120650 104810 90770 69550 59470 184510 142790 124340 107930 83040 71140 204160 158700 138390 120340 92900 80050 245130 189440 164710 142690 109060 93380 100880 77300 66880 57620 43630 37260 117250 90740 78930 68530 52580 45290 133910 104050 90640 78710 60140 51170 148990 114230 98870 85340 64720 55420 175840 135120 117270 101510 77430 66410 194480 150250 130550 113100 86400 74380 232960 178850 154820 133540 100910 86320 95790 72980 62900 53960 40420 34420 111270 85500 74120 63970 48520 41760 126850 97980 85090 73500 55580 47240 141590 107830 92970 79790 59860 51350 166300 127430 110260 94950 71770 61560 190060 141860 122800 105750 79830 68650 220670 168260 144950 124260 92610 79130 85810 64920 55370 46770 33650 29100 99750 75940 64930 55110 40050 34500 112960 86810 74470 63370 46070 39070 127330 96230 81890 69200 49790 43220 148750 113350 96980 82350 59880 51750 165790 126570 108090 91680 66380 56190 196830 148730 126420 106400 74580 63910 Single Vertical Air Discharge Condensing Unit Low Temperature – R-404A/R-507 B*V = BLV is Limitizer®, BDVS is Beacon II™ Notes: For 50 cycle capacity, multiply values by .86 15 Electrical Data Medium & Low Temperature – R-404A/R-507 Compressor Single Vertical Air Discharge Condensing Unit Unit Model Number Compressor Model B*V*150BM6 B*V*200BM6 B*V*220BM6 B*V*250BM6 B*V*300BM6 B*V*330BM6 B*V*350BM6 B*V*400BM6 B*V*500BM6 B*V*130BL6 B*V*150BL6 B*V*200BL6 B*V*220BL6 B*V*250BL6 B*V*300BL6 B*V*400BL6 Condenser Fan Motors RLA LRA Qty. 4C2067PH 4C2397PH 4B2707PH 4B3139PH 4B3604PH 6B4060PH 6B4709PH 6B5406PH 6B6462PH 4B2707PL 4B3139PL 4B3604PL 6B4060PL 6B4709PL 6B5406PL 6B6462PL 48.7 57.7 61.5 75.6 89.7 100.0 105.1 141.0 143.6 43.6 46.2 57.7 65.4 69.2 84.6 97.4 294 352 352 436 490 550 550 700 950 294 294 352 436 436 490 700 2 2 2 2 3 3 3 4 4 2 2 2 2 2 2 3 B*V*150BM6 B*V*200BM6 B*V*220BM6 B*V*250BM6 B*V*300BM6 B*V*330BM6 B*V*350BM6 B*V*400BM6 B*V*500BM6 B*V*130BL6 B*V*150BL6 B*V*200BL6 B*V*220BL6 B*V*250BL6 B*V*300BL6 B*V*400BL6 4C2067PH 4C2397PH 4B2707PH 4B3139PH 4B3604PH 6B4060PH 6B4709PH 6B5406PH 6B6462PH 4B2707PL 4B3139PL 4B3604PL 6B4060PL 6B4709PL 6B5406PL 6B6462PL 24.4 28.8 30.8 37.8 44.9 50.0 52.6 70.5 71.8 21.8 23.1 28.8 32.7 34.6 42.3 48.7 147 176 176 218 245 275 275 350 425 147 147 176 218 218 245 350 2 2 2 2 3 3 3 4 4 2 2 2 2 2 2 3 B*V*150BM6 B*V*200BM6 B*V*220BM6 B*V*250BM6 B*V*300BM6 B*V*330BM6 B*V*350BM6 B*V*400BM6 B*V*500BM6 B*V*130BL6 B*V*150BL6 B*V*200BL6 B*V*220BL6 B*V*250BL6 B*V*300BL6 B*V*400BL6 4C2067PH 4C2397PH 4B2707PH 4B3139PH 4B3604PH 6B4060PH 6B4709PH 6B5406PH 6B6462PH 4B2707PL 4B3139PL 4B3604PL 6B4060PL 6B4709PL 6B5406PL 6B6462PL 19.6 23.6 24.4 30.1 35.9 39.7 41.7 56.4 57.1 17.3 18.6 23.1 26.9 27.6 33.3 39.1 117 140 140 165 196 220 220 280 340 117 117 140 174 174 196 280 2 2 2 2 3 3 3 4 4 2 2 2 2 2 2 3 FLA 208-230 Volts 9.6 14.0 14.0 14.0 21.0 21.0 21.0 28.0 28.0 9.6 9.6 9.6 14.0 14.0 14.0 21.0 460 Volts 4.8 7.0 7.0 7.0 10.5 10.5 10.5 14.0 14.0 4.8 4.8 4.8 7.0 7.0 7.0 10.5 575 Volts 4.6 5.6 5.6 5.6 8.4 8.4 8.4 11.2 11.2 4.6 4.6 4.6 5.6 5.6 5.6 8.4 Beacon II™ or Air Defrost MCA † MOP †† Evap. Fan Amps Electric Defrost Defrost System Heaters MCA† Amps System MOP†† 70.5 86.1 90.9 108.5 133.1 146.0 152.4 204.3 207.5 64.1 67.4 81.7 95.8 100.5 119.8 142.8 110 125 150 175 200 225 250 325 350 100 110 125 150 150 200 225 Contact Factory for System Electrical Ratings 35.3 43.0 45.5 54.3 66.6 73.0 76.3 102.1 103.8 32.1 33.7 40.8 47.9 50.3 59.9 71.4 60 70 70 90 110 110 125 150 175 50 50 70 80 80 100 110 Contact Factory for System Electrical Ratings 29.1 35.1 36.1 43.2 53.3 58.0 60.5 81.7 82.6 26.2 27.9 33.5 38.5 40.1 47.2 57.3 40 50 60 70 80 90 100 125 125 40 45 50 60 60 80 90 Contact Factory for System Electrical Ratings B*V = BLV is Limitizer®, BDVS is Beacon II™ † MCA = Minimum Circuit Ampacity † † MOP = Maximum Overcurrent Protection ‡ Condensing unit data plate ratings will be based on actual system match. Beacon II™ and Air Defrost Units do not carry any of the evaporator fan or heater loads. Power is brought directly to the evaporators and does not go through the condensing unit. An evaporator heater hold out relay (option) is recommended when two or more evaporators are connected to a single (BLV/ BBV) condensing unit to allow termination on coils that have already defrosted to prevent unnecessary steaming. This option is not needed on Beacon II™ (BDVS) systems wired for a Master / Slave operation. Power is brought to each Beacon evaporator. Each coil terminates its own defrost. Refrigeration will not start until all coils have terminated defrost. 16 Remote Loads ‡ Specifications and Dimensional Data Medium & Low Temperature – R-404A/R-507 B*V*150BM6 B*V*200BM6 B*V*220BM6 B*V*250BM6 B*V*300BM6 B*V*330BM6 B*V*350BM6 B*V*400BM6 B*V*500BM6 B*V*130BL6 B*V*150BL6 B*V*200BL6 B*V*220BL6 B*V*250BL6 B*V*300BL6 B*V*400BL6 Compressor HP Model 4C2067PH 4C2397PH 4B2707PH 4B3139PH 4B3604PH 6B4060PH 6B4709PH 6B5406PH 6B6462PH 4B2707PL 4B3139PL 4B3604PL 6B4060PL 6B4709PL 6B5406PL 6B6462PL 15 20 22 25 30 33 35 40 50 13 15 20 22 25 30 40 Liquid Suction 7/8 7/8 1-1/8 1-1/8 1-1/8 1-1/8 1-1/8 1-1/8 1-1/8 7/8 7/8 7/8 7/8 1-1/8 1-1/8 1-1/8 1-5/8 1-5/8 2-1/8 2-1/8 2-1/8 2-1/8 2-1/8 2-1/8 2-1/8 1-5/8 1-5/8 2-1/8 2-1/8 2-1/8 2-1/8 2-1/8 BLV & Beacon II Net Dimensions Receiver Capacity @ Weight (Inches) 90% full (lbs.) (Approx) LBS KG (A) (lbs) 123 123 123 123 188 188 188 188 188 81 81 81 123 123 123 188 56 56 56 56 85 85 85 85 85 37 37 37 56 56 56 85 144 171 171 171 226 226 226 281 281 144 144 144 171 171 171 226 1,400 1,625 1,690 1,935 1,615 1,785 1,885 2,440 2,835 1,590 1,800 1,870 2,075 2,170 2,180 1,920 Single Vertical Air Discharge Condensing Unit Unit Model Number Refrigerant Line Connections (OD) B*V = BLV is Limitizer®, BDVS is Beacon II™ Dimensions (Inches) End View Side View 17 Vertical Air Discharge Condensing Units 26 to 100 HP Dual Compressor Standard and Optional Features • • • Designed for use with R-404A/507 Bitzer compressors with POE oil Thermally protected permanently lubricated ball bearing condenser fan motors Electrical controls, including compressor contactor and optional defrost control, are located in easily accessible control box with a hinged cover Limitizer® (JLD) head pressure control system Receivers are sized for sufficient pumpdown capacity with inlet and outlet service valves Cabinet is constructed from prepainted galvanized steel Convenient access panels for easy servicing to internal components Suction and discharge vibration eliminators Separate subcooling circuit in condensers for added capacity and vapor-free liquid Sealed liquid line filter drier and sight glass Service Mate™ module to assist troubleshooting Floating Tube™ coil design Prebent copper tubes minimize welded joints on internal piping • • • • • • • • • • • Factory-Installed Options Additional Standard Features for Parallel Piped Units Dual Vertical Air Discharge Condensing Unit 1. 2. 3. 4. 5. Replaceable core liquid line filter drier Replaceable core suction filter Suction accumulator Oil management system Contact Factory for Beacon IITM Application • • • • • • • • • • • • • • • • • • • Replaceable core liquid line filter driers with sight glasses Liquid line solenoid valves Suction filters Replaceable core suction filters Suction accumulators Oil separators with discharge line check valves Air defrost timers Electric defrost kits, including timer, evaporator fan contactor with fusing, defrost heater contactor(s), lockout relay and terminal strip Low ambient kits with heated and insulated receiver with time delay Compressor unloading External discharge line mufflers Phase-loss protection Manual-reset high pressure switches Anti-short cycling timers Compressor circuit breakers Condenser fan cycling (standard on JDDS) Three way heat reclaim valve with mounted check valves (n/a on JBD) Coated condenser coils for protection against corrosion in harsh environments Beacon II™ compatible Nomenclature J Brand J = Bohn 18 L Head Pressure Control L - Limitizer® D - Beacon II™ D 000B L 6 C Airflow Horsepower Temp. Range Refrigerant Voltage 260B - 26 300B - 30 400B - 40 440B - 44 500B - 50 600B - 60 660B - 66 700B - 70 800B - 80 110B -100 M = Med. Temp. L = Low Temp. 6 = R-404A, R-507 D = Vertical DS = Vertical Beacon C = 208-230/3/60 D = 460/3/60 E = 575/3/60 Performance Data Unit Model Number Compressor Model (2 Each) J*D*300BM6 4C2067PH J*D*400BM6 4C2397PH J*D*440BM6 4B2707PH J*D*500BM6 4B3139PH J*D*600BM6 4B3604PH J*D*660BM6 6B4060PH J*D*700BM6 6B4709PH J*D*800BM6 6B5406PH J*D*110BM6 6B6462PH Suction Temp. °F 40 30 25 20 15 5 40 30 25 20 15 5 40 30 25 20 15 5 40 30 25 20 15 5 40 30 25 20 15 5 40 30 25 20 15 5 40 30 25 20 15 5 40 30 25 20 15 5 40 30 25 20 15 5 90°F Amb. 95°F Amb. 100°F Amb. 110°F Amb. 394250 331570 301290 272450 245360 197580 460920 384140 348820 314800 283620 227670 508400 425210 387920 350670 315710 254190 582960 490520 444900 403020 363660 293650 678820 569890 518410 470170 423920 342580 770100 643130 585850 527550 475270 381390 877570 738320 671500 606520 547270 441480 1011680 851260 777050 704020 635050 513760 1184730 1002230 914120 829690 750050 609230 376590 314800 286220 258760 233090 187090 439520 366730 332640 299990 269620 215570 488080 409390 370550 335640 301920 242630 559640 468920 427310 386290 347710 280140 649850 546290 496570 450090 405270 326630 736570 616390 559580 505170 454380 363990 842230 707760 643050 581300 523130 421160 967490 817760 742220 673510 607050 490320 1135930 959810 874560 793020 715930 580370 357490 300810 265290 246010 220890 176140 419910 351180 316500 284950 255760 203590 465770 390720 354660 320780 288130 231170 536530 450170 407850 369000 331970 266760 622730 523150 475180 429890 386590 310890 705660 592210 535230 482450 433450 346540 803550 677170 613220 555030 498990 400990 926490 782360 709980 643140 579050 466700 1087530 917380 835020 756310 682090 551560 324040 269290 243760 219040 196340 155170 382760 315740 284830 255530 227790 178780 427590 355770 322580 290970 260680 207540 487960 408790 370800 334690 300180 239150 571310 476730 431820 389600 349370 278110 647170 537790 486380 437980 391700 310500 736830 614200 557150 502940 451000 359560 848530 710240 645990 582780 523390 418470 988100 831800 756870 683550 614590 492720 Dual Vertical Air Discharge Condensing Unit Medium Temperature – R-404A/R-507 J*D = JLD is Limitizer®, JDDS is Beacon II™, JLD*PP is Parallel Piped 19 Performance Data Low Temperature – R-404A/R-507 Unit Model Number Compressor Model (2 Each) Dual Vertical Air Discharge Condensing Unit J*D*260BL6 4B2707PL J*D*300BL6 4B3139PL J*D*400BL6 4B3604PL J*D*440BL6 6B4060PL J*D*500BL6 6B4709PL J*D*600BL6 6B5406PL J*D*800BL6 6B6462PL Suction Temp. °F 0 -10 -15 -20 -30 -40 0 -10 -15 -20 -30 -40 0 -10 -15 -20 -30 -40 0 -10 -15 -20 -30 -40 0 -10 -15 -20 -30 -40 0 -10 -15 -20 -30 -40 0 -10 -15 -20 -30 -40 J*D = , JLD is Limitizer®, JDDS is Beacon II™, JLD*PP is Parallel Piped 20 90°F Amb. 95°F Amb. 100°F Amb. 110°F Amb. 211930 163290 141770 122620 93600 79760 246490 191890 167610 146060 113170 97500 282080 220240 192520 167720 129340 110090 312650 241300 209620 181550 139100 118940 369030 285580 248670 215850 166080 142280 408320 317410 276770 240670 185790 160100 490250 378890 329420 285380 218130 186770 201760 154600 133760 115230 87260 74510 234490 181480 157870 137070 105150 90590 267830 208090 181280 157420 120290 102350 297970 228460 197730 170680 129450 110850 350950 270240 234530 203020 154850 132800 388960 300490 261100 226200 172800 148770 465930 357700 309630 267080 201830 172630 191580 145970 125810 107910 80840 68840 222550 170990 148240 129950 97030 83510 253710 195590 170180 146990 111160 94480 283180 215670 185940 159580 119730 102700 332610 254860 220520 189890 143530 123120 380130 283720 245600 211500 159650 137310 441340 336520 289900 248530 185220 158260 171630 129850 110740 93530 67290 58200 199500 151890 129860 110220 80094 68990 225910 173620 148940 126740 92150 78130 254650 192460 163780 138390 99570 86450 297490 226690 193970 164690 119770 103500 331580 253140 216170 183350 132760 112380 393670 297450 252840 212800 149700 127820 Electrical Data Medium & Low Temperature – R-404A/507 Condenser Fan Motors Unit Model Number Compressor Model (2 Each) RLA LRA Qty. J*D*300BM6 J*D*400BM6 J*D*440BM6 J*D*500BM6 J*D*600BM6 J*D*660BM6 J*D*700BM6 J*D*800BM6 J*D*110BM6 J*D*260BL6 J*D*300BL6 J*D*400BL6 J*D*440BL6 J*D*500BL6 J*D*600BL6 J*D*800BL6 4C2067PH 4C2397PH 4B2707PH 4B3139PH 4B3604PH 6B4060PH 6B4709PH 6B5406PH 6B6462PH 4B2707PL 4B3139PL 4B3604PL 6B4060PL 6B4709PL 6B5406PL 6B6462PL 48.7 57.7 61.5 75.6 89.7 100.0 105.1 141.0 143.6 43.6 46.2 57.7 65.4 69.2 84.6 97.4 294 352 352 436 490 550 550 700 950 294 294 352 436 436 490 700 4 4 4 4 6 6 6 8 8 4 4 4 4 4 4 6 J*D*300BM6 J*D*400BM6 J*D*440BM6 J*D*500BM6 J*D*600BM6 J*D*660BM6 J*D*700BM6 J*D*800BM6 J*D*110BM6 J*D*260BL6 J*D*300BL6 J*D*400BL6 J*D*440BL6 J*D*500BL6 J*D*600BL6 J*D*800BL6 4C2067PH 4C2397PH 4B2707PH 4B3139PH 4B3604PH 6B4060PH 6B4709PH 6B5406PH 6B6462PH 4B2707PL 4B3139PL 4B3604PL 6B4060PL 6B4709PL 6B5406PL 6B6462PL 24.4 28.8 30.8 37.8 44.9 50.0 52.6 70.5 71.8 21.8 23.1 28.8 32.7 34.6 42.3 48.7 147 176 176 218 245 275 275 350 425 147 147 176 218 218 245 350 4 4 4 4 6 6 6 8 8 4 4 4 4 4 4 6 J*D*300BM6 J*D*400BM6 J*D*440BM6 J*D*500BM6 J*D*600BM6 J*D*660BM6 J*D*700BM6 J*D*800BM6 J*D*110BM6 J*D*260BL6 J*D*300BL6 J*D*400BL6 J*D*440BL6 J*D*500BL6 J*D*600BL6 J*D*800BL6 4C2067PH 4C2397PH 4B2707PH 4B3139PH 4B3604PH 6B4060PH 6B4709PH 6B5406PH 6B6462PH 4B2707PL 4B3139PL 4B3604PL 6B4060PL 6B4709PL 6B5406PL 6B6462PL 19.6 23.6 24.4 30.1 35.9 39.7 41.7 56.4 57.1 17.3 18.6 23.1 26.3 27.6 33.3 39.1 117 140 140 165 196 220 220 280 340 117 117 140 174 174 196 280 4 4 4 4 6 6 6 8 8 4 4 4 4 4 4 6 FLA Beacon II™ or Air Defrost MCA † 208-230 Volts 19.2 128.8 28.0 157.8 28.0 166.4 28.0 198.1 42.0 243.8 42.0 267.0 42.0 278.5 56.0 373.3 56.0 379.1 19.2 117.3 19.2 123.2 19.2 149.0 28.0 175.2 28.0 183.7 28.0 218.4 42.0 261.2 460 Volts 9.6 64.5 14.0 78.8 14.0 83.3 14.0 99.1 21.0 122.0 21.0 133.5 21.0 139.4 28.0 186.6 28.0 189.6 9.6 58.7 9.6 61.6 9.6 74.4 14.0 87.6 14.0 91.9 14.0 109.2 21.0 130.6 575 Volts 9.2 53.3 11.2 64.3 11.2 66.1 11.2 78.9 16.8 97.6 16.8 106.1 16.8 110.6 22.4 149.3 22.4 150.9 9.2 48.1 9.2 51.1 9.2 61.2 11.2 70.4 11.2 73.3 11.2 86.1 16.8 104.8 Remote Loads ‡ MOP †† Evap. Fan Amps Electric Defrost Defrost System Heaters MCA† Amps System MOP†† 175 200 225 250 325 350 350 500 500 150 150 200 225 250 300 350 CONTACT FACTORY FOR SYSTEM ELECTRICAL RATINGS 80 100 110 125 150 175 175 250 250 80 80 100 110 125 150 175 CONTACT FACTORY FOR SYSTEM ELECTRICAL RATINGS 70 80 90 100 125 125 150 200 200 60 70 80 90 100 110 125 CONTACT FACTORY FOR SYSTEM ELECTRICAL RATINGS Dual Vertical Air Discharge Condensing Unit Compressor J*D = JLD is Limitizer®, JDDS is Beacon II™, JLD*PP is Parallel Piped † MCA = Minimum Circuit Ampacity †† MOP = Maximum Overcurrent Protection ‡ Condensing unit data plate ratings will be based on actual system match. 21 Specifications and Dimensional Data Medium & Low Temperature – R-404A/R-507 Unit Model Number J*D*300BM6 J*D*400BM6 J*D*440BM6 J*D*500BM6 J*D*600BM6 J*D*660BM6 J*D*700BM6 J*D*800BM6 J*D*110BM6 J*D*260BL6 J*D*300BL6 J*D*400BL6 J*D*440BL6 J*D*500BL6 J*D*600BL6 J*D*800BL6 Compressor Model (2 each) 4C2067PH 4C2397PH 4B2707PH 4B3139PH 4B3604PH 6B4060PH 6B4709PH 6B5406PH 6B6462PH 4B2707PL 4B3139PL 4B3604PL 6B4060PL 6B4709PL 6B5406PL 6B6462PL HP 30 40 44 50 60 66 70 80 100 26 30 40 44 50 60 80 Standard (2 each) Parallel Piped Liquid Suction Liquid Suction 7/8 7/8 1-1/8 1-1/8 1-1/8 1-1/8 1-1/8 1-1/8 1-1/8 7/8 7/8 7/8 7/8 1-1/8 1-1/8 1-1/8 1-5/8 1-5/8 2-1/8 2-1/8 2-1/8 2-1/8 2-1/8 2-1/8 2-1/8 1-5/8 1-5/8 2-1/8 2-1/8 2-1/8 2-1/8 2-1/8 1-1/8 1-1/8 1-1/8 1-3/8 1-3/8 1-3/8 1-5/8 1-5/8 1-5/8 1-1/8 1-1/8 1-1/8 1-3/8 1-3/8 1-3/8 1-3/8 2-1/8 2-1/8 2-1/8 2-5/8 2-5/8 2-5/8 3-1/8 3-1/8 3-1/8 2-1/8 2-5/8 2-5/8 3-1/8 3-1/8 3-1/8 3-1/8 J*D = JLD is Limitizer®, JDDS is Beacon II™, JLD*PP is Parallel Piped Dimensions (Inches) Dual Vertical Air Discharge Condensing Unit 22 StandardReceiver Capacity@90%full (lbs.)(2each) Connections (in.) ParalellPiped ReceiverCapacity@ 90%full(lbs.) Dimensions (inches) LBS KG LBS KG A Approx. Net Weight (lbs.) 123 123 123 123 188 188 188 188 188 81 81 81 123 123 123 188 56 56 56 56 85 85 85 85 85 37 37 37 56 56 56 85 188 188 269 269 269 269 363 363 363 188 188 188 269 269 269 363 85 85 122 122 122 122 165 165 165 85 85 85 122 122 122 165 144 171 171 171 226 226 226 281 281 144 144 144 171 171 171 226 2,805 3,250 3,380 3,875 3,225 3,570 3,770 4,880 5,670 3,175 3,605 3,735 4,145 4,240 4,355 3,835 23 For more information on Bohn refrigeration products, contact your sales representative or visit us at www.heatcrafrpd.com. A Brand of Heatcraft Refrigeration Products LLC 2175 West Park Place Blvd. • Stone Mountain, GA • 30087 (800) 537-7775 • FAX (770) 465-5990 www.heatcraftrpd.com Since product improvement is a continuing effort, we reserve the right to make changes in specifications without notice.
Similar documents
Walk-In Unit Coolers
with Bitzer Compressors See page 2A - 43 13 - 50 HP Air-Cooled Condensing Units with Bitzer Compressors See page 2A - 73 26 - 100 HP Air-Cooled Condensing Units with Bitzer Compressors See page 2A ...
More information