hoffco catalog - HGH Hardware Supply
Transcription
hoffco catalog - HGH Hardware Supply
Product and Specifications Catalog www.hoffcoinc.com PRODUCT INDEX A APOTHECARY DRAWERS……………………… 14 APPLIANCE GARAGE, CORNER ……………… 15 C CONDIMENT SHELF……………………………. CORBELS………………………………………….. CUTLERY DIVIDER……………………………… CUTTING BOARD CADDY……………………… CUTTING BOARD, PULL OUT ………………… 12 28 7 11 10 D DRAWER CONVERSION KIT…………………… 9 DUCTLESS CONVERSION KIT, HC200 ……….. 25 DUCTLESS CONVERSION KIT, HC300 ………. 26 E ENGLISH COUNTRY GALLEY RAIL / POSTS….. 29 ENGLISH COUNTRY SPINDLE RAIL / POSTS…. 30 ENGLISH COUNTRY VALANCE / CORBELS…… 28 F FIVE PIECE ROMAN ARCH VALANCE…………. 21 FIVE PIECE TUDOR ARCH VALANCE………….. 22 FLUTED FILLERS / ROSETTES………………….. 20 G GALLEY RAIL………………………………………. 31 H HOOD LINERS……………………………………… 27 HOOD TRIM KITS………………………………….. 24 M MINI PANTRY………………………………… 4 O ORGANIZER…………………………..……… 13 P PANTRY DOOR SHELF…………………..…. PANTRY SWING SHELF………………..…… PLATE LADDER………………………...……. 3 2 17 R REVERSE-A-RACK……………………..…….. 1 S SPICE INSERT………………………………… SPICE RACK, DOOR MOUNTED ………….. SPIN TRAYS…………………………………… SPINDLE RAIL / DECORATIVE POSTS…… STEM GLASS HOLDER……………………… 8 5 6 32 19 T TAMBOUR DOOR GUIDE SYSTEM 7-A…… TAMBOUR DOOR GUIDE SYSTEM 7-P…… 16 16 V VENTILATOR, HC200 ………………………… VENTILATOR, HC300 ………………………… 25 26 W WINE CUBE / APOTHECARY DRAWERS……. WINE RACK……………………………………… WOOD HOOD …………………………………… 14 18 23 HOFFCO, INC NORTH STATE HIGHWAY 274 WOOD LAKE, MN 56297 PH. (507) 485-3131 FAX. (507) 485-3533 www.hoffcoinc.com Reverse-A-Rack Part # RAR15-Birch RAR18-Birch RAR21-Birch RAR24-Birch RAR15-White RAR18-White RAR21-White RAR24-White RAR15-Wire RAR18-Wire RAR21-Wire RAR24-Wire Description Reverse-A-Rack-15"-Birch EXTRA SHELVES Reverse-A-Rack-18"-Birch EXTRA SHELVES Reverse-A-Rack-21"-Birch EXTRA SHELVES Reverse-A-Rack-24"-Birch EXTRA SHELVES Reverse-A-Rack-15"-White EXTRA SHELVES Reverse-A-Rack-18"-White EXTRA SHELVES Reverse-A-Rack-21"-White EXTRA SHELVES Reverse-A-Rack-24"-White EXTRA SHELVES Reverse-A-Rack-15"-Wire EXTRA SHELVES Reverse-A-Rack-18"-Wire EXTRA SHELVES Reverse-A-Rack-21"-Wire EXTRA SHELVES Reverse-A-Rack-24"-Wire EXTRA SHELVES Application Features * Unique hardware causes shelf to rotate, exposing alternate sides of shelf with each in/out cycle. * Provides easily accessible storage for canned goods and spices. * Can be used in a 15",18",21" and 24" wide wall cabinet. Special sizes available upon request. 7/1/2003 Units/Carton Weight/Carton 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 12 lbs. 2 lbs. 16 lbs. 3 lbs. 17 lbs. 4 lbs. 19 lbs. 5 lbs. 17 lbs. 2 lbs. 18 lbs. 3 lbs. 19 lbs. 4 lbs. 21 lbs. 5 lbs. 17 lbs. 3 lbs. 20 lbs. 4 lbs. 23 lbs. 6 lbs. 26 lbs. 7 lbs. Product Features * Different types of material available - birch, white melamine, and birch with a chrome wire fence. * Standard kit includes two adjustable shelves and one fixed shelf. * Comes complete with top and bottom mounting plates, installation hardware, and instructions. * Simple Installation PAGE 1 Pantry Swing Shelf PC 18 Part # PC18 PC24 PC36 PC 24 Description Units/Carton (1) 8" x 10" x 52" swing out can rack. Lacquer finish, installation hardware and double hinge pivot included. Unit has three adjustable shelves. (1) 8" x 16" x 52" swing out can rack. Lacquer finish, installation hardware and double hinge pivot included. Unit has three adjustable shelves. (2) 8" x 12" x 52" swing out can rack mounted to a double hinge pivot. Lacquer finish, installation hardware included. Unit has six adjustable shelves. Application Features * Designed to fit 18", 24", & 36" wide broom cabinets. * Transforms ordinary cabinet into efficient, usable, multi-storage chef's pantry. * Room behind swing shelf to add adjustable shelves for additional storage capacity. Includes double-hinged pivot assembly. * Designed for easy installation. 7/1/2003 PC 36 Weight/Carton 1 25 lbs. 1 35 lbs. 1 45 lbs. Product Features * Made of Birch and Maple-solid and veneers. * Durable, high-quality lacquer finish. * Individually cartoned for easy re-shipment. * Comes complete with adjustable shelves and necessary mounting hardware. * Installation instruction sheets are included. PAGE 2 Pantry Door Shelf PD 18 / 36 Part # PD18 / 36 PD24 Description Units/Carton (1) 4" x 12" x 52" door mount can rack. Lacquer finish, installation hardware included. Unit has five (5) adjustable shelves. For PD36 use (2) units. (1) 4" x 18" x 52" door mount can rack. Lacquer finish, installation hardware included. Unit has five (5) adjustable shelves. Application Features * Designed to fit 18", 24", & 36" wide broom cabinets. * Utilizes the back of a cabinet door to store canned goods and other items. * Can be used independently or with a pantry swing shelf. * Designed for easy installation. 7/1/2003 PD 24 Weight/Carton 1 14 lbs. 1 19 lbs. Product Features * Made of Birch and Maple-solid and veneers. * Durable, high-quality lacquer finish. * Individually cartoned for easy re-shipment. * Adjustable shelves and locking shelf clips. * Comes complete with mounting screws. * Installation instruction sheets are included. PAGE 3 Mini Pantry 5 1/16" - 8 1/16" BASE MOUNTING PLATE SHELF 23 3/4" ROLLOUT UNIT STABILIZING RAILS 20" 6 11/16" - 9 11/16" Part # Description Units/Carton Weight/Carton MP-9 MP-12 Mini Pantry 9" Cabinet Mini Pantry 12" Cabinet 1 1 14 lbs. 17 lbs. Application Features * Fits into a 9" and 12" wide base cabinet. * Provides easy to reach storage in otherwise narrow cabinet opening. * Ideal to place and store 2-liter soda bottles. * Designed for easy installation. 7/1/2003 Product Features * Made of Birch solids and veneers. * Durable, high quality lacquer finish. * Full extension, 75lb. capacity guide system. * Comes complete with mounting hardware. * Installs by simply attaching base mounting plate to cabinet bottom. PAGE 4 Door Mounted Spice Rack /1 3" 26 3/4" 10" 4" Part # Description DM SRK1530 DM SRK1530 4"X10"X36" Dmsrk 4"X13"X36" Dmsrk Application Features * Sizes to fit 15"and 18" wide wall cabinets (30" high). * Mounts to back of cabinet door. * Utilizes standard shelf clip holes for easy installation. * Lightweight - eliminates concern of door sagging when loaded. 7/1/2003 Units/Carton Weight/Carton 1 1 5 lbs. 6 lbs. Product Features * Soft Maple solid wood with a veneer back. * Individually cartoned for easy reshipment. * Durable, high quality lacquer finish. * Adjustable spring loaded dowels. * Comes complete with four shelf adapters to allow easy modification to 5/8" thick standard depth shelf. * Installation instructions and mounting screws included. PAGE 5 Spin Trays Part # Description 18R 28R 30R 28P 32P 18" Round 28" Round 30" Round 28" Pie 32" Pie Application Features * Popular accessory for all types of wall, base or corner cabinets. * Converts hard to reach storage space into convenient, accessible storage. * Light natural finish matches most cabinet interiors. * Custom sizes and specifications available in quantity. 7/1/2003 Units/Carton Weight/Carton 2 2 2 2 2 22 lbs. 28 lbs. 30 lbs. 28 lbs. 30 lbs. Product Features * Tray constructed of 1/2" thick birch MDF core. * Pie cut molding made of 3/4" thick maple. * 1 1/2" wide birch veneer wrappers. * Predrilled to accommodate pole hardware or 12" bearing plate. * Packaged two trays per carton. PAGE 6 Cutlery Divider 243" 1" 20 4 19 7 8" Part # Description CUT DIVIDER-24 24" Cutlery Divider (Trimmable) Application Features * Cutlery divider is trimmable in both length and width. * Cutlery divider is designed for easy installation into base cabinet drawers. * Provides orderly storage for silverware and kitchen utensils. 7/1/2003 Units/Carton Weight/Carton 1 4 lbs. Product Features * Comes prefinished with a durable, high quality lacquer finish. * Dividers made of 3/8" solid soft maple. * Assembled with a 1/4" plywood bottom. * Individually cartoned for easy reshipment. PAGE 7 Spice Insert " 3/4 47 20 1/2" Part # Description SPICE-INSERT-48 47 3/4" Spice Insert (Trimmable) Application Features * Spice insert is designed for easy installation into base cabinet drawers. * Provides easy, accessible, out of the way place to neatly store spices. * Stores inside the cabinet freeing up valuable countertop space. * Designed to hold most sizes of spice containers. 7/1/2003 Units/Carton Weight/Carton 1 4 lbs. Product Features * Comes prefinished with a durable, high quality lacquer finish. * Individually cartoned for easy reshipment. * Constructed of 1/2" thick birch MDF core with visible faces edgebanded. * Available in a 47 3/4" trimmable size. PAGE 8 Drawer Conversion Kit WIDTH 3.875” 22.500” Weight/Carton Part # Description Units/Carton DRK-15 Drawer Conversion Kit-11.062” Wide 1 10 lbs. DRK-18 Drawer Conversion Kit-14.062” Wide 1 11 lbs. DRK-21 Drawer Conversion Kit-17.062” Wide 1 12 lbs. DRK-24 Drawer Conversion Kit-20.062” Wide 1 13 lbs. Application Features * A complete, ready to install work station easily replaces kitchen drawer and provides a convenient storage area for knives and cutting board. * The cutting board slides easily in the guides and is removable for cleaning and use else ware in the kitchen. * Designed for easy installation. 7/1/2003 Product Features * Kit includes a solid knife tray, 6-slot knife block, cork pad, wood carrier frame, and a polyethylene cutting board. * Knife tray and wood tray prefinished with a durable high quality lacquer finish. * Designed for easy installation. * Individually cartoned for easy re-shipment. PAGE 9 Pull Out Cutting Board CUTTING BOARD 1.000” CUTTING BOARD 14.875” 14.875” CARRIER FRAME 23.000” Part # #2 CBK-HM CBK TRIM-CH CBK TRIM-HK CBK TRIM-HM CBK TRIM-RO Description Units/Carton Weight/Carton Pull Out Cutting Board Front Trim - Cherry Front Trim - Hickory Front Trim - Hard Maple Front Trim - Red Oak 1 1 1 1 1 3 lbs. .5 lbs. .5 lbs. .5 lbs. .5 lbs. Application Features * This removable cutting board comes with holder for mounting. * The cutting board is removable for cleaning. * Designed for easy installation. 7/1/2003 Product Features * Carrier frame constructed of solid Hard Maple with a clear lacquer finish. * Front trim available in Hard Maple, Red Oak, Hickory, and Cherry. * Polyethylene cutting board is dishwasher safe and approved by the FDA (Food and Drug Administration) item 2.1 Reg #21CRP177.1520. PAGE 10 Cutting Board Caddy Part # CBC-HM Description Cutting Board Caddy - HM Application Features Units/Carton Weight/Carton 1 3 lbs. Product Features * This removable cutting board comes with holder for * Holder available in Hard Maple with clear lacquer mounting to the inside of a cabinet door. finish. * Designed for easy installation. * Polyethylene cutting board is dishwasher safe and approved by the FDA (Food and Drug Administration) item 2.1 Reg #21CRP177.1520. 7/1/2003 PAGE 11 Condiment Shelf Kit 943" 30" 814" Part # Description COND-SH 30-RO COND-SH 30-HM COND-SH 30-CH COND-SH 30-HK 30" Red Oak Condiment Shelf 30" Hard Maple Condiment Shelf 30" Cherry Condiment Shelf 30" Hickory Condiment Shelf Application Features * Designed to be mounted under wall cabinets. * Converts otherwise useless space into attractive functional storage space. * Ideal for displaying cups, saucers, spices, and other whatnots. * Designed for easy assembly and installation. 7/1/2003 Units/Carton Weight/Carton 1 1 1 1 8 lbs. 8 lbs. 8 lbs. 8 lbs. Product Features * Available in Red Oak, Hard Maple, Cherry, & Hickory. * All parts are machine sanded and ready for finishing. * Unit consists of (2) end panels, (1) shelf, (1) back, (2) hanger rails. * Shipped unassembled (KD), individually cartoned. * Can be cut down to fit smaller size wall cabinets. PAGE 12 Organizer HANGER CLEATS 6" 30" Part # 12" Description ORG30 - RO ORG30 - HM ORG30 - HK ORG30 - CH 30" Red Oak Organizer 30" Hard Maple Organizer 30" Hickory Organizer 30" Cherry Organizer Application Features * Convenient to store and organize envelopes, paper, pencils, phone books, and other essentials. * Ideal for use above a desk area or near a telephone. * Designed to be mounted under or between wall cabinets. 7/1/2003 Units/Carton 1 1 1 1 Weight/Carton 17 lbs. 17 lbs. 17 lbs. 17 lbs. Product Features * Constructed of solid wood and veneers. * Available in Red Oak, Hard Maple, Cherry, and Hickory. * Comes machine sanded. * Hanger cleats fit up against cabinet bottom, in between cabinet ends, and behind cabinet front frame. * Vertical partitions and horizontal shelves to accommodate various storage needs. * Shipped individually cartoned. * Front edges bull nosed for softer look and user friendliness. PAGE 13 Wine Cube / Apothecary Drawers 30.000" 5.250" (TYP) 12.000" 5.250" (TYP) 6.000" END VIEW WINE CUBE 30" 5.125" 5.000" Part # 10.250" DRAWER BOX Description WINE30 - RO WINE30 - HM WINE30 - HK WINE30 - CH 5-DRAWER KIT 30" Red Oak Wine Cube 30" Hard Maple Wine Cube 30" Hickory Wine Cube 30" Cherry Wine Cube Drawer Kit Application Features * Convenient way to store and organize wine bottles. * Also available with apothecary drawers for decorative storage. * Designed to be mounted under or between wall cabinets or between base cabinets. * Can be installed vertically or horizontally. 7/1/2003 Units/Carton Weight/Carton 1 1 1 1 5 15 lbs. 15 lbs. 15 lbs. 15 lbs. 8 lbs. Product Features * Constructed of veneered sheet stock with wood tape on edges. * Available in Red Oak, Hard Maple, Cherry, and Hickory. * Comes machine sanded. * Shipped individually cartoned. * Unassembled for easy finishing. * Drawer boxes made from 1/2" pre-finished birch plywood. PAGE 14 Corner Appliance Garages HOFFCO ADJUSTABLE SPRING TENSION TRACK SYSTEM 7 23 1/2" 18" 11 19/32" 18 1/4" 11 19/32" 18" 18" 13 1/4" MOUNTING BLOCKS Part # AG24-HM AG24-RO AG24-CH Description 24" Hard Maple Appliance Garage 24" Red Oak Appliance Garage 24" Cherry Appliance Garage Application Features * Fits under diagonal corner wall cabinets. * Provides hidden storage for counter top appliances. * Can be trimmed to fit most applications. * Designed for easy installation. 7/1/2003 Units/Carton 1 1 1 Weight/Carton 15 lbs. 15 lbs. 15 lbs. Product Features * Available in Red Oak, Cherry, & Hard Maple. * All parts are machine sanded, ready for finishing. * Includes assembled face frame with Hoffco adjustable spring tension track system 7 & tambour door, (2) 1/2" veneer end panels, (1) top brace, & (2) mounting blocks. * Individually cartoned. * Requires assembly. PAGE 15 Tambour Guide System 7-A Part # Description SYSTEM 7-A Adjustable Tambour Guides Units/Carton Weight/Carton 1 Kit .5 lbs. * Available in white or almond ABS plastic. * Above pricing is for standard length track, 16" long spindle, donut, and tension spring. * Packaged one kit per polybag. Tambour Guide System 7-P Part # Description SYSTEM 7-P Adjustable Tambour Guides Units/Carton Weight/Carton 1 Kit .5 lbs. * Available in white or almond polypropylene plastic. * Above pricing is for standard length track, 16" long spindle, donut, and tension spring. * Packaged one kit per polybag. Application Features * Mounts easily to the face frame of a straight or angle corner appliance garage cabinet. * Eliminates binding and sticky operation of tambour doors. * Innovative design allows for field adjustment of spring tension. * Door guides smoothly and easily from top to bottom. * Door position is controlled from fully opened to fully closed. 7/1/2003 Product Features * Injection molded ABS (7A) - polypropylene (7P) guide tracks can be screwed to the back of the cabinet face frame. * Kit includes a 5/8" x 16" long spindle, tension spring, and plastic donut for tambour door attachment. * Field adjustment spring tension for full control of tambour door movement. * Horizontal door adjustment . * Extra donuts, springs, and longer spindles available for wider doors. * System holds up to 19" of tambour door up to .220" thick. * Available in almond or white. PAGE 16 Plate Ladder Part # Weight/Carton Description Units/Carton PLT-LDR-CH Plate Ladder Kit - CH 2 1 lbs. PLT-LDR-HM Plate Ladder Kit - HM 2 1 lbs. PLT-LDR-RO Plate Ladder Kit - RO 2 1 lbs. Application Features * This unfinished wood plate ladder is designed to easily be trimmed to work in a custom application. * Dowels are easily removed for cleaning. * Designed for easy installation. 7/1/2003 Product Features * Available in Hard Maple, Cherry, & Red Oak. * 34-3/8" long rails. * 12-3/8" long dowels. * Unfinished * Unassembled * Predrilled PAGE 17 Wine Rack 4" A A 7/16 3/4 SECT A-A Part # WR18X30-RO WR18X30-HM WR24X30-RO WR24X30-HM WR34X72-RO WR34X72-HM Description Wine Rack 18" X 30" - Red Oak Wine Rack 18" X 30" - Hard Maple Wine Rack 24" X 30" - Red Oak Wine Rack 24" X 30" - Hard Maple Wine Rack 34" X 72" - Red Oak Wine Rack 34" X 72" - Hard Maple Application Features * Provides an attractive place to store and display bottles. * Popular accessory for kitchens, wet bars, china cabinets, & wall units. * Available cut to specific sizes, or in 34" x 72" pieces for custom applications. * Designed for easy installation. 7/1/2003 Units/Carton 2 2 2 2 5 5 Weight/Carton 3 lbs. 3 lbs. 5 lbs. 5 lbs. 45 lbs. 45 lbs. Product Features * Moldings are 7/16" x 3/4" with eased edges for a professionally finished appearance. * Openings are 4" x 4" square and will accommodate most size bottles. * The lattice is assembled using a offset cross lap joint. This joint in combination with the eased corners on the moldings make the unit friendly to the touch & soft in appearance. * Available in Red Oak, Hard Maple, Cherry, & Hickory. * Ready for finishing. PAGE 18 Stem Glass Holder 36" 11" 3 1/4" Part # 1 5/8" Description USGH-36-RO USGH-36-HM USGH-36-CH 36" Red Oak Stem Glass Holder 36" Hard Maple Stem Glass Holder 36" Cherry Stem Glass Holder Application Features * Provides an easy accessible place to store and display stemware. * Accommodates most sizes and styles of stemware. * Ideal for use in wet bars and hutch cabinets. * Designed for easy installation under most cabinets. 7/1/2003 Units/Carton Weight/Carton 1 1 1 6 lbs. 6 lbs. 6 lbs. Product Features * Available in solid Red Oak, Hard Maple & Cherry. * Individually cartoned. * Fully sanded and ready for finishing. * Screwed together to allow for easy modification for use with smaller cabinets. * Comes predrilled for various installation methods. PAGE 19 Fluted Fillers / Rosettes 3 .0 00" 00" LENGTH 3.0 0" .75 3.000" 0" .75 Part # Description 31 1/2” FF-HM 31 1/2” FF-CH 31 1/2” FF-RO 48” FF-HM 48” FF-CH 48” FF-RO 96” FF-HM 96” FF-CH 96” FF-RO 96” RSTT-HM 3” RSTT-CH 3” RSTT-RO Application Features * Used in various applications to create custom look. * Designed to be easily trimmed to accommodate various applications. 7/1/2003 Units/Carton 31 1/2” Fluted Filler - Hard Maple 31 1/2” Fluted Filler - Cherry 31 1/2” Fluted Filler - Red Oak 48” Fluted Filler - Hard Maple 48” Fluted Filler - Cherry 48” Fluted Filler - Red Oak 96” Fluted Filler - Hard Maple 96” Fluted Filler - Cherry 96” Fluted Filler - Red Oak 3”x 3” Rosette-Hard Maple 3”x 3” Rosette-Cherry 3”x 3” Rosette-Red Oak 5 5 5 5 5 5 5 5 5 10 10 10 Weight/Carton 5 lbs. 5 lbs. 5 lbs. 7 lbs. 7 lbs. 7 lbs. 10 lbs. 10 lbs. 10 lbs. 2 lbs. 2 lbs. 2 lbs. Product Features * Available in 31 1/2”, 48", and 96” lengths. * Available in solid Red Oak, Hard Maple, and Cherry. PAGE 20 Five Piece Roman Arch Valance ROMAN ARCH VALANCE STOCK MODIFICATION #1 MODIFICATION #2 MODIFICATION #3 CLASSIC KEY A 10.500” 9.750” 8.625” 7.875” 36",48",60",72" B 2.250” 1.500” 2.250” 1.500” "B" .750" "A" STOCK ROMAN ARCH VALANCE WITH AZTEC KEYSTONE 36",48",60",72" VICTORIAN KEY .750" "A" MODIFICATION #1 36",48",60",72" "B" .750" "B" .750" SHAKER KEY "A" ROMAN ARCH VALANCE WITH INLAID ACANTHUS CARVING MODIFICATION #2 36",48",60",72" AZTEC KEY "A" MODIFICATION #3 Part # Description RAV36-RO RAV36-CH RAV36-HM RAV36-HK RAV48-RO RAV48-CH RAV48-HM RAV48-HK RAV60-RO RAV60-CH RAV60-HM RAV60-HK RAV72-RO RAV72-CH RAV72-HM RAV72-HK 36" Roman Arch Valance 36" Roman Arch Valance 36" Roman Arch Valance 36" Roman Arch Valance 48" Roman Arch Valance 48" Roman Arch Valance 48" Roman Arch Valance 48" Roman Arch Valance 60" Roman Arch Valance 60" Roman Arch Valance 60" Roman Arch Valance 60" Roman Arch Valance 72" Roman Arch Valance 72" Roman Arch Valance 72" Roman Arch Valance 72" Roman Arch Valance A-KEY S-KEY V-KEY C-KEY Units/Carton (RO) (CH) (HM) (HK) (RO) (CH) (HM) (HK) (RO) (CH) (HM) (HK) (RO) (CH) (HM) (HK) 4 lbs. 4 lbs. 4 lbs. 4 lbs. 6 lbs. 6 lbs. 6 lbs. 6 lbs. 7 lbs. 7 lbs. 7 lbs. 7 lbs. 9 lbs. 9 lbs. 9 lbs. 9 lbs. INLAID ACANTHUS CARVING OPTION N/A N/A Modification #1 Modification #2 Modification #3 N/A N/A N/A N/A N/A N/A 1 1 1 1 1 lb. 1 lb. 1 lb. 1 lb. Aztec Keystone Shaker Keystone Victorian Keystone Classic Keystone Application Features * Used in various applications to create custom look. *Designed to be easily trimmed for smaller openings. * 4 styles of keystones available that are designed for easy installation and are individually cartoned. 7/1/2003 Weight/Carton 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Product Features * Constructed of solid hardwoods. * Available with an inlaid Acanthus embossed carving. * Valance height can be modified. * Valances are individually packaged in a polysleeve and cartoned with end protection. * Available in Red Oak, Cherry, Hard Maple, & Hickory. PAGE 21 Five Piece Tudor Arch Valance TUDOR ARCH VALANCE STOCK MODIFICATION #1 MODIFICATION #2 MODIFICATION #3 CLASSIC KEY A 10.500” 9.750” 8.625” 7.875” 36",48",60",72" B 2.250” 1.500” 2.250” 1.500” "B" .750" "A" STOCK TUDOR ARCH VALANCE WITH AZTEC KEYSTONE 36",48",60",72" VICTORIAN KEY .750" "A" MODIFICATION #1 36",48",60",72" "B" .750" "B" .750" SHAKER KEY "A" TUDOR ARCH VALANCE WITH INLAID ACANTHUS CARVING MODIFICATION #2 36",48",60",72" AZTEC KEY "A" MODIFICATION #3 Description TAV36-RO TAV36-CH TAV36-HM TAV36-HK TAV48-RO TAV48-CH TAV48-HM TAV48-HK TAV60-RO TAV60-CH TAV60-HM TAV60-HK TAV72-RO TAV72-CH TAV72-HM TAV72-HK 36" Tudor Arch Valance (RO) 36" Tudor Arch Valance (CH) 36" Tudor Arch Valance (HM) 36" Tudor Arch Valance (HK) 48" Tudor Arch Valance (RO) 48" Tudor Arch Valance (CH) 48" Tudor Arch Valance (HM) 48" Tudor Arch Valance (HK) 60" Tudor Arch Valance (RO) 60" Tudor Arch Valance (CH) 60" Tudor Arch Valance (HM) 60" Tudor Arch Valance (HK) 72" Tudor Arch Valance (RO) 72" Tudor Arch Valance (CH) 72" Tudor Arch Valance (HM) 72" Tudor Arch Valance (HK) 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 INLAID ACANTHUS CARVING OPTION N/A N/A Modification #1 Modification #2 Modification #3 N/A N/A N/A N/A N/A N/A Aztec Keystone Shaker Keystone Victorian Keystone Classic Keystone 1 1 1 1 A-KEY S-KEY V-KEY C-KEY Application Features * Used in various applications to create custom look. *Designed to be easily trimmed for smaller openings. * 4 styles of keystones available that are designed for easy installation and are individually cartoned. 7/1/2003 Units/Carton Weight/Carton Part # 4 lbs. 4 lbs. 4 lbs. 4 lbs. 6 lbs. 6 lbs. 6 lbs. 6 lbs. 7 lbs. 7 lbs. 7 lbs. 7 lbs. 9 lbs. 9 lbs. 9 lbs. 9 lbs. 1 lb. 1 lb. 1 lb. 1 lb. Product Features * Constructed of solid hardwoods with 1/4” plywood insert panels. * Available with an inlaid Acanthus embossed carving. * Valance height can be modified. * Valances are individually packaged in a polysleeve and cartoned with end protection. * Available in Red Oak, Cherry, Hard Maple, & Hickory. PAGE 22 Wood Hood EXTENSION WINGS FOR 36" HOOD APPLICATION. 30" 3" 3" 29 7/8" 10 7/8" 10 7/8" 10" 16 3/4" 24" 7 1/4" 7 1/4" 24 3/8" FLUTED STILE EXTENSIONS FOR 36" CONVERSION KIT. 9 1/4" 3" * STILE EXTENSIONS ARE POSITIONED BY MEANS OF TONGUE AND GROOVE AND SECURED WITH SPECIAL SCREWS PROVIDED. Part # Description HOOD-30-RO HOOD-30-HK HOOD-30-HM HOOD-30-CH CONKIT-36-RO CONKIT-36-HK CONKIT-36-HM CONKIT-36-CH Units/Carton 30" Wood Hood W/liner - Red Oak 30" Wood Hood W/liner - Hickory 30" Wood Hood W/liner - Hard Maple 30" Wood Hood W/liner - Cherry 36" Wood Hood Conversion Kit - Red Oak 36" Wood Hood Conversion Kit - Hickory 36" Wood Hood Conversion Kit - Hard Maple 36" Wood Hood Conversion Kit - Cherry Application Features * All wood construction adds to the natural beauty of the kitchen. * Designed to be easily installed between two wall cabinets. * Can be stained to match other cabinets. 7/1/2003 3" Weight/Carton 1 1 1 1 1 Pair 1 Pair 1 Pair 1 Pair 28 lbs. 28 lbs. 28 lbs. 28 lbs. 3 lbs. 3 lbs. 3 lbs. 3 lbs. Product Features * Available in Red Oak, Hard Maple, Cherry, & Hickory. * Completely sanded and ready for finishing. * Optional English Country and spindle rail trim kits also available. * Conversion Kit includes 3" fluted stile extensions and metal extension wings for a 36" wide application. * Individually cartoned for easy re-shipment. PAGE 23 Hood Trim Kits Contemporary Spindle Rail Trim Kit #2 Part # English Country Galley Rail Trim Kit #3 Description TRIMKIT#2-RO TRIMKIT#2-HK TRIMKIT#2-HM TRIMKIT#2-CH TRIMKIT#3-RO TRIMKIT#3-HK TRIMKIT#3-HM TRIMKIT#3-CH TRIMKIT#4-RO TRIMKIT#4-HK TRIMKIT#4-HM TRIMKIT#4-CH Contemporary Spindle Rail Trim Kit Contemporary Spindle Rail Trim Kit Contemporary Spindle Rail Trim Kit Contemporary Spindle Rail Trim Kit English Country Galley Rail Trim Kit English Country Galley Rail Trim Kit English Country Galley Rail Trim Kit English Country Galley Rail Trim Kit English Country Hood Apron Tim Kit English Country Hood Apron Trim Kit English Country Hood Apron Trim Kit English Country Hood Apron Trim Kit Application Features * All wood construction adds to the natural beauty of the kitchen. * All parts are pre-cut for easy assembly. * Designed for use with Hoffco wood hood. 7/1/2003 English Country Hood Apron Trim Kit #4 Units/Carton Weight/Carton 1 1 1 1 1 1 1 1 1 1 1 1 3 lbs. 3 lbs. 3 lbs. 3 lbs. 3 lbs. 3 lbs. 3 lbs. 3 lbs. 3 lbs. 3 lbs. 3 lbs. 3 lbs. Product Features * Available in Red Oak, Hard Maple, Cherry, & Hickory. * Completely sanded and ready for finishing. * Individually cartoned for easy re-shipment. PAGE 24 HC 200 Ventilator Part # Description HC200 HC200 Kitchen Ventilator Units/Carton Weight/Carton 1 19 lbs. HC 200 Ductless Conversion Kit / Backdraft Damper DUCTLESS CONVERSION KIT BACKDRAFT DAMPER BOOT GRILL PIPE Part # HC200DCK HC200BD EXPANDED ALLUMINUM / CARBON POLYESTER PAD Description Ductless Conversion Kit Backdraft Damper Units/Carton Weight/Carton 1 1 6 lbs. .5 lbs. Product Features * Almond finish in stock (white finish available by special order). * 230 CFM * A self contained unit with a two speed axial fan. * Push button controls, two enclosed cook top lights with lens diffuser (bulbs not supplied). 7/1/2003 * Aluminum mesh grease filter is easily washable. * Pre-wired for electrical connection. * Charcoal filter will be laminated within replacement grease filter. PAGE 25 HC 300 Ventilator Part # HC300 Description HC300 Kitchen Ventilator Units/Carton Weight/Carton 1 19 lbs. HC 300 Ductless Conversion Kit 90° S.W. ELBOW DUCT DUCT (FIELD CUT TO LENGTH) GRILL Part # HC300DCK Description Ductless Conversion Kit EXPANDED ALUMINUM / CARBON POLYESTER PAD Units/Carton Weight/Carton 1 6 lbs. Product Features * Almond finish in stock (white finish available by special order). * 360 CFM * A self contained unit with an infinitely variable speed blower. * Convenient dimmer controlled cook top lights. * Washable aluminum mesh grease filter is included. * Pre-wired for electrical connection. * Removable backdraft damper attached to power unit. 7/1/2003 PAGE 26 Hood Liners HCML3019 2 HCML3619 3.937" " 37 8.4 18 .18 7" 3.937" 7" .43 4 3 18 .18 7" HC30T 5" .87 29 HCWINGS 4.000" 4.000" 10 .87 5" 18 .12 5" 3.0 5" .37 4 2 Part # Description HCML3019 HCML3619 HC30T HCWINGS 30" Square Liner 36" Square Liner 30" T-Liner 36" Extension Wings (For HC30T) Units/Carton 1 1 1 1 " 00 Weight/Carton 1 lbs. 1 lbs. 1 lbs. 1 lbs. Product Features * Almond finish in stock (white finish available by special order). * Cut out accepts HC130, HC240, HC200, & HC300 ventilators. * Cut out size is 10.000" x 17.312". * T-Liner fits the Hoffco wood hood. * Includes installation instructions. * Special sizes quoted upon request. * No minimum order requirement on stock product. 7/1/2003 PAGE 27 English Country Valance / Corbels 8 15/16" 5" 25" 16 7/16" 5" 37" 31 3/8" 5" 49" 46 1/4" 5" 86" 5" 4" Part # HCVAL-25-RO HCVAL-25-HK HCVAL-25-HM HCVAL-25-CH HCVAL-37-RO HCVAL-37-HK HCVAL-37-HM HCVAL-37-CH HCVAL-49-RO HCVAL-49-HK HCVAL-49-HM HCVAL-49-CH HCVAL-86-RO HCVAL-86-HK HCVAL-86-HM HCVAL-86-CH CORBELS-RO CORBELS-HK CORBELS-HM CORBELS-CH Description 25" English Country Valance (RO) 25" English Country Valance (HK) 25" English Country Valance (HM) 25" English Country Valance (CH) 37" English Country Valance (RO) 37" English Country Valance (HK) 37" English Country Valance (HM) 37" English Country Valance (CH) 49" English Country Valance (RO) 49" English Country Valance (HK) 49" English Country Valance (HM) 49" English Country Valance (CH) 86" English Country Valance (RO) 86" English Country Valance (HK) 86" English Country Valance (HM) 86" English Country Valance (CH) English Country Corbels (RO) English Country Corbels (HK) English Country Corbels (HM) English Country Corbels (CH) Application Features * Used in various applications to create English Country look. * Designed to be used as the top rail in the face frame, or as a valance below, or between cabinets. * Ideal for valances and open shelving. * Designed to be easily trimmed to accommodate various applications. * Can be dadoed to accept cabinet top. 7/1/2003 Units/Carton Weight/Carton 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 3 lbs. 3 lbs. 3 lbs. 3 lbs. 4 lbs. 4 lbs. 4 lbs. 4 lbs. 5 lbs. 5 lbs. 5 lbs. 5 lbs. 8 lbs. 8 lbs. 8 lbs. 8 lbs. 1 lbs. 1 lbs. 1 lbs. 1 lbs. Product Features * 3/4" x 4" x 5" solid wood with rabbet on edges for easy installation. * 3/4" x 5" solid wood with Hoffco pattern. * Back side of valance relieved behind pattern to accept accent panel (not supplied). * Available in 25", 37", 49", and 86" lengths. * Available in solid Red Oak, Hard Maple, Cherry, and Hickory. * Hard Maple mineral streaks allowed. * Other species and sizes available in quantity. PAGE 28 131 32" 215 32" 215 16" English Country Galley Rail / Posts 3 " 4 1" 1" CORNER POST 1" SLIDING POST 1 1 2" 33 16" 4 1 2" 3 " 4 72" Part # Description ECGR72-RO 72" ECGR72-HM 72" ECGR72-CH 72" ECGR72-HK 72" CORNER POST SLIDING POST Units/Carton English Country Galley Rail - Red Oak English Country Galley Rail - Maple English Country Galley Rail - Cherry English Country Galley Rail - Hickory English Country Galley Rail Corner Post English Country Galley Rail Sliding Post Application Features * Used in various applications to create English Country look. * Designed to be used as a decorative rail along the top of cabinets. * Ideal for accenting wood range hoods or open shelving. * Can be mitered or used with posts to make corners. * Designed for easy installation. 7/1/2003 13 8" 8 8 8 8 48 48 Weight/Carton 19 lbs. 19 lbs. 19 lbs. 19 lbs. 4 lbs. 4 lbs. Product Features English Country Galley Rail * Available in Red Oak, Hard Maple, Cherry, & Hickory. * Manufactured in 72" lengths. * Shipped bulk packed in cartons & ready to be finished. Posts (Optional) * Sliding posts are designed to be positioned at any desired interval and are easy to install. * Shipped bulk packed in cartons & ready to be finished. PAGE 29 131 32" 215 32" 215 16" English Country Spindle Rail / Posts 3 " 4 1" 1" CORNER POST 1" SLIDING POST 4 1 2" 27 8" 1 1 2" 72" Part # Description ECSR72-RO72" ECSR72-HM72" ECSR72-CH72" ECSR72-HK72" CORNER POST SLIDING POST Units/Carton English Country Galley Rail - Red Oak English Country Galley Rail - Maple English Country Galley Rail - Cherry English Country Galley Rail - Hickory English Country Galley Rail Corner Post 48 English Country Galley Rail Sliding Post Application Features * Used in various applications to create English Country look. * Designed to be used as a decorative rail along the top of cabinets. * Ideal for accenting wood range hoods or open shelving. * Can be mitered or used with posts to make corners. * Designed for easy installation. 7/1/2003 3 " 4 Weight/Carton 18 18 18 18 48 30 lbs. 30 lbs. 30 lbs. 30 lbs. 4 lbs. 4 lbs. Product Features English Country Spindle Rail * Available in Red Oak, Hard Maple, Cherry, & Hickory. * Manufactured in 72" lengths. * Shipped bulk packed in cartons & ready to be finished. Posts (Optional) * Sliding posts designed to be positioned at any desired interval and are easy to install. * Shipped bulk packed in cartons & ready to be finished. PAGE 30 Galley Rail 4" 3/4 7/16 2 15/16" 3/4 1/8 96" Part # Description GR-4-96-8-OO GR-4-96-8-MM GR-4-96-8-CC GR-4-96-8-HH 96" Galley Rail w/ #8 Spindle Red Oak 96" Galley Rail w/ #8 Spindle Hard Maple 96" Galley Rail w/ #8 Spindle Cherry 96" Galley Rail w/ #8 Spindle Hickory Application Features * Used as decorative rail along top of cabinets. * Ideal for accenting wood range hoods or open shelving. * Can be mitered to make corners. * Designed for easy installation. 7/1/2003 Units/Carton 3/4 1 3/8 1/4 Weight/Carton 10 27 lbs. 10 27 lbs. 10 27 lbs. 10 27 lbs. Product Features * Available in solid Red Oak, Hard Maple, Cherry, and Hickory. * Shipped bulk packed in cartons and ready to be finished. PAGE 31 Spindle Rail / Decorative Posts MIDDLE 1.0 00 " 1. 0 00 " 00 " 1. 0 2.871" Mortised two opposing sides. 1.0 END CORNER 2.871" 2.871" 2.871" PLAIN 1. 0 " 00 00 " 1. 0 00 1. 0 " 00 " 1. 0 00 " DECORATIVE POST 3" 3/4 7/16 2 1/8" 1 1/4" 7/16 3/4 96" SPINDLE RAIL Part # SR-3-96-3-OO SR-3-96-3-MM SR-3-96-3-CC SR-3-96-3-HH #3 POST #3 POST #3 POST #3 POST Description Spindle Rail 96" Spindle Rail w/ #3 Spindle Red Oak 96" Spindle Rail w/ #3 Spindle Hard Maple 96" Spindle Rail w/ #3 Spindle Cherry 96" Spindle Rail w/ #3 Spindle Hickory Decorative Posts Plain Post End Post Corner Post Middle Post Application Features * Used as decorative rail along top of cabinets. * Ideal for accenting wood range hoods or open shelving. * Can be mitered to make corners. * Easy installation. 7/1/2003 Units/Carton Weight/Carton 24 46 lbs. 24 46 lbs. 24 46 lbs. 24 46 lbs. 48 48 48 48 4 lbs. 4 lbs. 4 lbs. 4 lbs. Product Features * Available in Red Oak, Hard Maple, Hickory & Cherry. * Comes pre-sanded and ready to be finished. * Shipped bulk packed in cartons and ready to be finished. PAGE 32