for Organic and Printed Electronics

Transcription

Phone +49 69 6603-1336
Fax
+49 69 6603-2336
E-Mail [email protected]
Internet www.oe-a.org
www.oe-a.org
Lyoner Str. 18
60528 Frankfurt am Main
Germany
OE-A Organic and Printed Electronics
OE-A (Organic and Printed Electronics Association)
A working group within VDMA
OE-A Toolbox
2013/2014
A working group within
OE-A TOOLBOX FOR ORGANIC AND PRINTED ELECTRONICS
Table of Contents
1
About the OE-A Toolbox for Organic and Printed Electronics
1
2
List of Components of Organic and Printed Electronics Included
2
3
Datasheets of the Components of Organic and Printed Electronics Included in the
OE-A Toolbox
4
3.1
Active Components
4
3.2
Passive Components
19
3.3
Materials
25
Copyright © OE-A (Organic and Printed Electronics Association), Frankfurt, 2013
All rights reserved. Reproduction only with written permission by OE-A.
1 About the OE-A Toolbox for Organic and Printed
Electronics
Organic and printed electronics stands for a revolutionary new way of electronics: thin, lightweight, flexible and produced at low cost. It thus enables single use devices and new applications. In order to illustrate the potential of this emerging technology and to foster the cooperation
among its members, the OE-A started the demonstrator project in 2005. Since then project
teams with more than 20 partner companies and institutes from Europe, the U.S. and Asia have
worked on very different kinds of demonstrators. To carry these projects forward, the OE-A
demonstrator team developed the “OE-A Toolbox for Organic and Printed Electronics”.
The OE-A Toolbox presently contains more than 25 different components of organic and printed
electronics along with a datasheet for each component. The Toolbox will be expanded
constantly. As a result, the Toolbox represents the state-of-the-art of organic and printed
electronic components.
The datasheets provide the following information
 electrical specifications
 geometrical specifications
 layout and a photograph
 contact details of the company providing the device
With the OE-A Toolbox we offer the possibility to use organic and printed electronics
components to develop and build new applications and integrated smart systems.
If you are interested in devices from the OE-A Toolbox please contact the project partner
directly. You find the contact details on the datasheets.
2 List of Components of Organic and Printed
Electronics Included
Recently, various organic and printed electronics components have been improved in quality
and yield. Now, these components can be used for designing and developing new applications.
Some of these components are gathered in the “Toolbox for Organic and Printed Electronics”.
The toolbox contains different components of organic and printed electronics along with a
datasheet for each component.
The OE-A Toolbox includes:
Active Components
 Battery, secondary (Varta/HdM/etifix)
 Battery, primary (Enfucell)
 Photovoltaic Cell (VTT, Fraunhofer ISE)
 Electrochromic Display (Acreo)
 OLED (FhG IAP)
 Piezoelectric Sensor (FhG IAP)
 Strain Gauge (VTT)
 Printed Memory (Thin Film Electronics)
 Battery Charger (Schreiner Group)
 Touchsensitive Surface (plastic electronic)
 Transparent Conductive Film (PolyIC)
 Transparent Heating Element (PolyIC)
 Transparent Touchscreen (PolyIC)
Passive Components
 Antenna (Acreo)
 Capacitor (SchreinerGroup)
 Capacitor (Cetemmsa)
 Resistor (SchreinerGroup)
 Resistor (Cetemmsa)
Materials
 Conductive Material (DuPont Microcircuit Materials, ELANTAS Beck)
 Insulators / Dielectrics (DuPont Microcircuit Materials, ELANTAS Beck)
 Polyester Film (DuPont Teijin Films)
 Electroluminescent Ink (ELANTAS Beck)
 Printable Conductive Polymer (Heraeus Precious Metals)
 Coated Papers (Schoeller Technocell, PEL)
 Print Form (GRT)
The datasheets provide the following information
 electrical specifications
 geometrical specifications
 layout and a photograph
 contact details of the company providing the device
The toolbox represents the state-of-the-art of organic and printed electronic components.
All components are for use in the demonstrators only.
Contact
Lyoner Str. 18
60528 Frankfurt
Germany
Phone
Fax
E-Mail
Internet
+49 69 66 03 18 96
+49 69 66 03 28 96
[email protected]
ww.oe-a.org
3 Datasheets of the Components of Organic and
Printed Electronics Included in the OE-A Toolbox
3.1 Active Components













Battery, secondary (Varta/HdM/etifix)
Battery, primary (Enfucell)
Photovoltaic Cell (VTT, Fraunhofer ISE)
Electrochromic Display (Acreo)
OLED (FhG IAP)
Piezoelectric Sensor (FhG IAP)
Strain Gauge (VTT)
Printed Memory (Thin Film Electronics)
Battery Charger (Schreiner Group)
Touchsensitive Surface (plastic electronic)
Transparent Conductive Film (PolyIC)
Transparent Heating Element (PolyIC)
Transparent Touchscreen (PolyIC)
OE-A Toolbox
VARTA HP 50/01/60
Fully printed, thin and flexible
secondary Battery
 Classification / Type:
VARTA HP 50/01/60
 Electrical Specifications:
Nominal Voltage
1.2 V
End-of-charfe Voltage
1.4 V
End-of-discharge Voltage 1.0 V
Nominal Capacity
20 mAh
Internal Resistant
20 Ohm
 Geometrical Specifications:
Width:
50 mm
Lenght:
60 mm
Height:
< 1 mm
These components are for the use in demonstrators only. If you are interested
in this component, please contact:
VARTA Microbattery GmbH
Daimlerstr. 1, 73497 Ellwangen, Germany
Dr. Martin Krebs
Tel:
+49-7961-921-432
Email: [email protected]
Hochschule der Medien HdM
Nobelstr. 10, 70569 Stuttgart, Germany
Prof. Gunter Hübner
Tel:
+49-711-8923-2144
www.oe-a.org
OE-A Toolbox
Enfucell SoftBattery®
Enfucell’s thin, flexible and ecofriendly
SoftBattery® is made with Enfucell
allPrinted™ technology. SoftBattery® is best
suited for applications with average power
consumption below 1,0 mW. Typical
applications include RFID tags and
microsensors, pharmaceutical & cosmetical
transdermal delivery patches, functional
packaging & printing and new disposable
applications like OLEDs, displays etc.
SoftBattery® Reg:
1.5 V
(Other types: Mini 1.5 V and Reg 3.0 V
customized batteries also available)
Nominal Voltage:
1.5 V
Nominal Capacity:
90 mAh
Nom. Internal Resistance: 50 Ω
Width:
72 mm
Length:
60 mm
Height:
0.7 mm
Enfucell Oy Ltd.
Petikontie 16-18
FI-01720 Vantaa
Finland
Ms. Anja Talo
Tel: +358-45-120-6030
www.enfucell.com
www.oe-a.org
OE-A Toolbox
Printed Organic Photovoltaic module
Printed Organic Photovoltaic module
consists of 8 series connected solar
cells. Polymeric layer hole transport
and photoactive layers are gravure
printed on top of patterned ITO-PET.
The Ca/Ag cathode is evaporated. The
module
is
encapsulated
using
commercially available barrier foils.
The OPV module has been developed
in FP7-ICT-2007-1-215271 FACESS
project in co-operation with CEA and
IMEC.
Power source
 Electrical Specifications for the
module:
Voc 4.5-4.8 V
Isc
16-17.6 mA
FF
0.34-0.44
PCEactive area 1.7-2.1 %
 Geometrical Specifications
Width:
43 mm
Lenght:
57 mm
Height :
0.4 mm
Active area 16 cm2
VTT Technical Research Centre of Finland
Kaitoväylä 1, P.O.Box 1100
FI-90571 Oulu, Finland
Raimo Korhonen
Tel: +358-40-703-0052
www.vtt.fi
www.oe-a.org
OE-A Toolbox
Flexible Organic Photovoltaic Module
Organic photovoltaic module on a
flexible PET-substrate with eleven
interconnected solar cells split into
two parts. The ITO-anode is replaced
by a transparent conducting polymer
supported by metal structures. The
module is encapsulated with a
transparent flexible barrier foil.
Possible applications are low power
consumer products and energy
autonomous monitoring systems.
Power source
VOC: 6.5 V
ISC: 13.9 mA
FF: 64 %
PCEactive area: 2.2 %
Total width: 50 mm
Total length: 114 mm
Total height: ca. 0.25 mm
Active area: 26.4 cm²
Fraunhofer ISE
Heidenhofstr. 2
79110 Freiburg
Germany
Tel: +49 (0)761-4588-0
www.ise.fraunhofer.de
www.oe-a.org
OE-A Toolbox
Electrochromic display
All printed monochrome EC display.
Realized by only two or three printing steps
plus encapsulation.
Monochrome Electrochromic display
T: 20-24 °C, RH: 35 %, Area: 0.8 cm2
Drive voltage, Vd
3V
Switch time, ts
< 10 sec
< 0.5 mC
Switch charge, Qs
Switch current, is
< 140 µA
Switch energy, Es
< 1.5 mWs
Sustain current, Isus < 10 µA
Contrast, ∆L
>15
Retention (without power) Tr >15 min
Operating life time
> 400 (No of switches)
Shelf life
12 months
Width / Lenght:
Optional within 0.8 cm2
Height:
< 70 µm
(excluding substrate)
Acreo Swedish ICT AB
Bredgatan 34
SE-60221 Norrköping
Sweden
Lars-Olov Hennerdal
Tel: +46-11-2025-00
www.acreo.se
www.oe-a.org
OE-A Toolbox
OLED
With this OLED component it is possible to
build up a dice. The component can be
driven by a DC voltage in the range from 3 V
to 8 V.
OLED Component
nominal Voltage:
5 V (3-8 V)
current density:
max. 10 mA/cm2
Width:
25 mm
Lenght:
25 mm
Height:
1.8 mm
Fraunhofer IAP
Geiselbergstrasse 69
14476 Golm
Germany
Dr. Armin Wedel
Tel: +49-331-568-1910
www.oled-research.com
www.oe-a.org
OE-A Toolbox
Piezoelectric Sensor
Piezoelectric sensor based on cellular
polypropylene for the detection of fast
changing pressure.
Piezoelectric sensor
Piezoelectric coefficient: up to 50 pC/N
Width:
40 mm
Length:
up to 90 mm
Height:
up to 300 µm
Fraunhofer IAP
Geiselbergstrasse 69
14476 Golm
Germany
Dr. Armin Wedel
Tel: +49-331-568-1910
www.oled-research.com
www.oe-a.org
OE-A Toolbox
Flexography printed strain gauges
For large area stress or condition monitoring
systems. Various substrates and inks can be
used.
Demo
samples
printed
with
conductive graphite ink and nanoparticle
silver ink on PET substrate. Printing
technologies enable production of very large
area strain gauges or strain gauge arrays.
Printed (resistive) strain sensor and sensor
arrays
Silver gauges:
Sheet resistance
< 1Ω / square
Graphite gauges:
Sheet resistance
Gage factor
5-8k Ω / square
typically 25
Width:
0.1 mm - 300 mm
Length:
1 cm to >1 m
Height:
1-5 :m
VTT Technical Research Centre of Finland
Kaitoväylä 1, P.O.Box 1100
FI-90571 Oulu
Finland
Raimo Korhonen
Tel: +358-40-703-0052
www.vtt.fi
www.oe-a.org
OE-A Toolbox
Thinfilm printed memory
Disposable, non-volatile and rewriteable Memory tags.
Areas of use:
Toys & Games, Reward Cards, Event
Marketing, Brand Protection
The developers’ kit contains a USB
ready Arduino controller and memory
cards to develop a prototype
application.
Printed non-volatile memory
Number of bits: 14-20
Drive Voltage: <24V
Read time: 100 µs
Data – Retention: > 10 Years
Endurance: > 10,000 cycles
Operating temp. /RH T=0 to +45 ºC
Storage temp. /RH T= -20 ºC to +65 ºC
 Physical Characteristics:
Label thickness
50 µm
Thin Film Electronics ASA
Oslo, Norway
Tel: +47 23 27 51 59
www.thinfilm.no
www.oe-a.org
OE-A Toolbox
Battery Charger powered by RFID-Reader
Printed Battery Charger on Plastic Substrate
to use with an RFID-Reader to charge two
Ni-MH cells in series (at about 3 V). A load
of 15 mA at 2.55 V can either be driven
directly or via the battery.
Layout using printed passive elements
and an SMD-diode
printed inductor:
L1
with series resistor:
R1
printed resistor:
R2
printed capacitance:
C1
SMD Diode
D1
14 µH
18 Ω
10 Ω
100 nF
Width:
80 mm
Length:
104 mm
Height:
< 3 mm
(due to SMD diode)
Schreiner Group GmbH & Co. KG
Bruckmannring 22
85764 Oberschleissheim
Germany
Tel: +49-89-31584-5634
Fax: +49-89-31584-5305
www.schreiner-variolight.com
www.oe-a.org
OE-A Toolbox
touchskin
touchskin is a proximity and touchsensitive intelligent surface which
completely replaces mechanical
switches, sliders and wheels with
capacitive electronics.
touchskin fully integrates the
capacitive controls in molded parts.
As a result, touchskin is dirt and water
resistant and gives a high design
freedom in terms of shape as well as
in terms of look and feel of thePrinted
Battery Charger on Plastic Substrate
to use with an RFID-Reader to charge
two Ni-MH cells in series (at about
3 V). A load of 15 mA at 2.55 V can
either be driven directly or via the
battery.
3D touchpanel
Based on the customer requirements
in this component, please contact
plastic electronic GmbH
Lunzerstr. 89, 4030 Linz / Austria
www.plastic-electronic.com
www.oe-a.org
OE-A Toolbox
PolyTC® - Transparent Conductive Film
 General Specifications:
High resolution pattern conductive film on
PET substrate
Line width: 15µm
Gap: 450µm
Material: Silver (Ag)
Openings per Inch: 55
Grid angle: 45°
Transmittance: 93% (conductive grid; calculated)
Transparent conductive film for
touchsensors or EMI-shieldings
Sheet Resistance: ~23 Ohm/Sq (measured)
PET substrate thickness: 50µm
Length: 9,6cm
Height : 6,5cm
PolyIC GmbH & Co. KG
Johannes Schad
Tucherstrasse 2
D - 90763 Fuerth
Tel: +49 911 20249 8125
Fax: +49 911 20249 8001
www.polyic.com
www.oe-a.org
OE-A Toolbox
PolyTC® - Transparent Heating Element
Transparent conductive structures
can also be useful in any applications
where optical transparency and heat
is required. Applications are in the
fields of e.g. side windows or review
mirrors.
The heating element consists of
different layers like:




PET substrate (50µm)
PolyTC® layer
Contact enhancement
Protection layer
Transparent heating element
Voltage
[V]
Current
[mA]
Power*
[W]
Temperature**
[°C]
0
0
0
26.9
2
68
0.14
27.3
4
138
0.55
28.5
6
208
1.25
31.0
8
277
2.21
34.8
10
345
3.45
39.9
12
411
4.93
46.8
14
474
6.64
55.2
16
533
8.53
64.8
18
586
10.56
75.9
*higher conductive mesh available; **avarage temperature
Electric resistance: ~30 Ω
Heating area: ~29.4cm²
Johannes Schad
Tucherstrasse 2
D - 90763 Fuerth
Tel: +49 911 20249 8125
Fax: +49 911 20249 8001
www.polyic.com
www.oe-a.org
OE-A Toolbox
PolyTC® - Transparent Touchscreen 3x5
Capacitive touch screens are electronic
switching devices actuated by finger
touch which do not contain any
mechanically moved parts. The extreme
fineness of PolyTC® structures enables
transparent touch devices. The
touchscreen consists of different layers
like:




PET substrate (50µm)
PolyTC® layer (touchsensor)
Contact enhancement
Protection layer
Transparent touchscreen for selfcapacitive touch-controller
 3x5 Touch arrays each 1cm²
 Suitable for every self-capacitive
touch-controller
 Tail suitable for e.g. ZIF-connector
with 1mm pitch
 Active area width: 67.0 mm
 Active area height: 45.0 mm
Johannes Schad
Tucherstrasse 2
D - 90763 Fuerth
Tel: +49 911 20249 8125
Fax: +49 911 20249 8001
www.polyic.com
www.oe-a.org
3.2 Passive Components





Antenna (Acreo)
Capacitor (SchreinerGroup)
Capacitor (Cetemmsa)
Resistor (SchreinerGroup)
Resistor (Cetemmsa)
OE-A Toolbox
Antenna
Antenna realized by high speed Dry Phase
Patterning of Aluminium/PET substrate.
Antenna
Depending on the design of the antenna.
Width / Length:
Design dependent.
Height:
9 µm Aluminium on
36 µm PET
Total height:
45 µm.
Acreo Swedish ICT AB
Bredgatan 34
SE-6o221 Norrköping
Sweden
Lars-Olov Hennerdal
Tel: +46-11-2025-00
www.acreo.se
www.oe-a.org
OE-A Toolbox
Capacitor
Printed Capacitor on Plastic Substrate
Material: silver paste / barium titanate paste
Capacity:
ca. 100 nF
Capacity is proportional to printed area.
Width:
40 mm
Length:
55 mm
Height:
< 1 mm
Bruckmannring 22
Germany
Tel: +49-89-31584-5634
Fax: +49-89-31584-5305
www.oe-a.org
OE-A Toolbox
Capacitor
Inkjet printed capacitors
Silver ink contacts
Polymer dielectric
Thin film multilayer capacitor
Capacity Range: 10pF – 10nF
Tolerance: ± 30%
C = 12 pF/mm2
Conductive
Width & Length: minimum 1mm
Insulator
Conductive
Substrate
Eloi Ramon
Office QC2054
Engineering School
Campus UAB
08193 Bellaterra, Spain
www.oe-a.org
OE-A Toolbox
Resistor
Printed Resistor on Plastic Substrate
Material: silver paste
Resistance:
10 Ω ± 10 %
Resistance can be increased by printing
longer lines, decreased by printing wider
or thicker lines.
Width:
15 mm
Length:
12 mm
Height:
< 1 mm
Bruckmannring 22
Germany
Tel: +49-89-31584-5634
Fax: +49-89-31584-5305
www.oe-a.org
OE-A Toolbox
Resistances
Inkjet printed resistances
Silver ink contacts
High Resisitivity PEDOT:PSS
Protection layer
Thin film resistance
Configurations: Linear and Snake
Resistance range: 200 ohm- 100 Kohm
Tolerance: ± 40%
Rcontact = 7,5 mohm/µm2
Rsquare = 200ohm-600ohm (depending
on design)
Width: minimum 200µm
Eloi Ramon
Office QC2054
Engineering School
Campus UAB
08193 Bellaterra, Spain
www.oe-a.org
3.3 Materials







Conductive Material (DuPont Microcircuit Materials, ELANTAS Beck)
Insulators / Dielectrics (DuPont Microcircuit Materials, ELANTAS Beck)
Polyester Film (DuPont Teijin Films)
Electroluminescent Ink (ELANTAS Beck)
Printable Conductive Polymer (Heraeus Precious Metals)
Coated Papers (Schoeller Technocell, PEL)
Print Form (GRT)
OE-A Toolbox
5064 Ag ink and 5018 insulating ink
High conductivity screen printable Ag ink for
interconnects, pads, terminations, antennae
and electrodes.
UV cured insulating ink for printing
crossovers on the conductor tracks.
Inks
5018
Breakdown Voltage (DC): > 20 V/μm
Dielectric Constant:
< 5 @ 1 kHz
Insulation Resistance:
>10 GΩ/sq
@ 25 μm
5064
Ag content:
63 – 66%
Viscosity @10 rpm:
10 – 20 PaS
Typical Resistivity:
5 mΩ/sq @25 μm
N/A
Du Pont Microcircuit Materials
Coldharbour Lane
Frenchay
Bristol BS161QD
UK
Dr. Kerry Adams
Tel: + 44 1454 776818
www.mcm.dupont.com
www.oe-a.org
OE-A Toolbox
Bectron® CP Conductive Inks
Product description
The Bectron® CP Series is stable one component
screen printable conductive inks. After printing and
curing no further sintering steps are necessary; the
conductivity will be given right after drying.
Application: Screen printing on paper, carton and foil
for different applications in printed electronics e.g.
capacitors, conductive traces, electroluminescent
displays or solar cells.
Printing properties: The selection of the substrate has an impact on the final result,
concerning printing properties such as adhesion, leveling, wetting and transfer as
well as the electrical performance of the printed item.
CP 6647 VP
CP 6649 VP
CP 6650 VP
CP 6660 VP
Description
Ag@Al2O3
Solvent based
Ag@Al2O3
Solvent based
Ag@Cu
Solvent based
Ag
Solvent based
Ag content
24 ± 2 %
18 ± 2 %
15 ± 2 %
75 ± 2 %
5.0 ± 1.0 µm
5.0 ± 1.0 µm
1.5 ± 0.2 µm
1.0 ± 0.2 µm
Curing
5 min @ 60°C
5 min @ 60°C
5 min @ 60°C
5 min @ 60°C
Viscosity @
23°C
20.000 ± 1.000
mPa·s
20.000 ± 1.000
mPa·s
20.000 ± 1.000
mPa·s
20.000 ± 1.000
mPa·s
0.2 Ω/sq
@ 15 µm
0.4 Ω/sq
@ 15 µm
0.3 Ω/sq
@ 15 µm
0.04 Ω/sq
@ 15 µm
Pigment size
(D50)
Sheet
resistance
ELANTAS Beck GmbH
Mark Abendroth
Grossmannstrasse 105
D - 20539 Hamburg
Tel: +49 40 78946 231
Fax : +49 40 78946 349
www.elantas.com
www.oe-a.org
OE-A Toolbox
Bectron® DP Insulators & Dielectrics
Product description
The Bectron® DP Series is stable one component
printable dielectric / insulating inks. Spin-coating or inkjet formulations of these systems are possible.
Application: Printing on paper, carton and foil for
different applications in printed electronics e.g. OFETs
or capacitors.
Printing properties: The selection of the substrate has an impact on the final result,
concerning printing properties such as adhesion, leveling, wetting and transfer as
well as the electrical performance of the printed item.
DP 8451 VP
DP 8441 VP
DP 8501 VP
DP 8601 VP
Acrylate
Solvent free
Acrylate
Solvent free
Epoxy
Solvent free
Acrylate
Solvent free
Printing process
Screen
Screen
Gravure or flexo
Gravure or flexo
Curing
5 min @
90°C
5 m/min @
550 mJ/cm² UVA
5 m/min @ 550
mJ/cm² UVA
5 m/min @ 550
mJ/cm² UVA
Viscosity @ 23°C
[mPa·s]
5.000 ± 500
7.500 ± 500
300 ± 50
250 ± 50
Dielectric constant
@ 23°C/100 KHz
3.0
3.6
3.6
3.8
Dielectric strength
@ 23°C [V/µm]
>200
>110 V/µm
>180
>190
Volume resistivity
@ 23°C [ Ω·cm]
>1016
>1015 Ω·cm
>1014
>1015
Description
ELANTAS Beck GmbH
Mark Abendroth
D - 20539 Hamburg
Tel: +49 40 78946 231
Fax: +49 40 78946 349
www.elantas.com
www.oe-a.org
OE-A Toolbox
Bectron® EL Electroluminescent Inks
Product description
The Bectron® EL Series comprises single
component VOC-free inks for the fabrication of
electroluminescent devices by screen printing
technique. These inks are based on a unique
curing process that initiates film formation upon
UV-light irradiation providing superior chemical and
environmental resistance properties. Available
colors are green, blue, cyan and white.
Processing: Yield and performance may vary significantly depending on specific
processing and layout configurations.
Printing properties: The inks show excellent adhesion to ITO, PEDOT and various
polymer and paper substrates.
EL 7001 AB VP
EL 7002 AC VP
EL 7003 AG VP
EL 7004 AW VP
EL 7030 D VP
EL 7050 C VP
EL 7090 E VP
Description
Active phosphor
ink
Dielectric ink
Conductive ink
Encapsulation
ink
UVA Curing
5 m/min @
600 mJ/cm²
5 m/min @
600 mJ/cm²
5 m/min @
1000 mJ/cm²
5 m/min @
200 mJ/cm²
Pigment
ZnS:Cu,Cl, Mn
BaTiO3
Ag@Al2O3
-
Solids content
100% VOC-free
100% VOC-free
100% VOC-free
100% VOC-free
30 µm
10 µm
10-15 µm
>5 µm
Target layer
thickness
ELANTAS Beck GmbH
Mark Abendroth
D - 20539 Hamburg
Tel: +49 40 78946 231
Fax: +49 40 78946 349
www.elantas.com
www.oe-a.org
OE-A Toolbox
Polyester Film
Piezoelectric sensor based on cellular
polypropylene for the detection of fast
changing pressure.
Teonex® Q65 FA, Planarised Teonex® Q65
FA, Melinex® STTM family, Planarised PET
materials
(dependent on grade, but general
characteristics)
Low shrinkage (Melinex® STTM <150C
<200C)
Teonex® Q65
Smooth surface,
Solvent resistance, High clarity
A4 sheets to small rolls available
Teonex® Q65
FA and planarised
Teonex® Q65
FA 125 micron
25 and 50 micron
Teonex® Q83
®
TM
Melinex ST
50-175 micron
Recommend discussion with DuPont
Teijin Films to ensure most appropriate
film is selected.
DuPont Teijin Films
The Wilton Centre
Redcar TS10 4RF
UK
www.oe-a.org
OE-A Toolbox
CLEVIOS™ S V3
Three types of conductive fine line grids on
PET-film screen printed with Clevios S V3.
Clevios S V3 is a screen printable paste
enabling the user to print transparent
conductive patterns for e.g. touch screens or
organic TFTs. Special grades for the printing
of fine lines are available.
printable transparent electrode
surface resistivity:
400-500 ohm/sq
(e.g. one fine line)
Width:
150, 200,
and 250 µm
Length:
50 mm
Height:
200-300 nm
(
)
n
SO-3
SO3H SO3H SO3H SO-3
O
O
(
O
O
O
S
S
2+
S
O
O
O
S
S
O
SO3H
O
S
O
)
m
O
Heraeus Precious Metals GmbH & Co. KG
Chempark B 202
51368 Leverkusen
Germany
Dr. Detlef Gaiser
Tel: +49-214-30-46292
www.clevios.com
www.oe-a.org
OE-A Toolbox
pe:smart paper type 1
Paper based substrate having closed,
nonporous surface coating, with hydrophilic
primer layer.
Substrate
Insulator
Thickness:
185 µm
A4 sheets, other formats /
small rolls available on request.
Felix Schoeller Service GmbH & Co.KG
Burg Gretesch
49086 Osnabrück
Germany
Dr. Wolfgang Schmidt
Tel: +49-541-3800-853
www.felix-schoeller.com
www.oe-a.org
OE-A Toolbox
pe:smart paper type 2
Paper based substrate having
hydrophilic nanoporous surface coating.
Substrate
Insulator
Thickness:
205 µm
A4 sheets, other formats /
small rolls available on request.
Felix Schoeller Service GmbH & Co.KG
Burg Gretesch
49086 Osnabrück
Germany
Dr. Wolfgang Schmidt
Tel: +49-541-3800-853
www.felix-schoeller.com
www.oe-a.org
OE-A Toolbox
Electronic Grade Paper: PEL Nano P60
 General Specifications:
A research-grade, electronic-rated paper designed
to complement the range of substrates available
for the development of printed electronics.
The inorganic coating on the top side of the paper
has a pore size of 60nm that absorbs solvents and
dispersion agents thereby concentrating the
nanoparticles and enhancing low temperature
sintering.
 Curing:
NanoP60 can be heated to 150°C with minimal
discolouration and, for short periods, can be used
at higher temperatures. The paper-ink
combinations work well with pulsed Xe flash using
NovaCentrix’s PulseForge and Xenon
Corporation’s Sinteron systems.
 Data:
All data is provided for information only and is not
a guarantee of performance or a warranty. PEL
recommend testing the Nano P60 paper using
your nano particulate inks.
Printed Electronics Ltd
Hedging Lane
Tamworth, B77 5HH UK
Tel: +44 18 27 26 33 38
St. John`s Innovation Centre
Cowley Road
Cambridge, CB4 0WS UK
Tel: +44 12 23 42 12 85
www.printedelectronics.com
www.oe-a.org
OE-A Toolbox
Micro Structured Print Form
Reproduction of smallest
information in roto gravure print
form by High Resolution Laser of
2 µm resolution.
Suitable for mass production in
roto gravure
Line Width:
- in sample :12 µm in print form
- can be reduced to 6 µm
GRT GmbH&Co.KG
Dr. Ernst-Rudolf Weidlich
Goorweg 14
D - 59075 Hamm
Tel: +49-2381-98766-10
www.grt-gmbh.de
www.oe-a.org
Phone +49 69 6603-1336
Fax
+49 69 6603-2336
E-Mail [email protected]
Internet www.oe-a.org
www.oe-a.org
Lyoner Str. 18
60528 Frankfurt am Main
Germany
OE-A Organic and Printed Electronics
A working group within VDMA
OE-A Toolbox
2013/2014
A working group within

for Organic and Printed Electronics

Transcription

Similar documents

HM-6106 - Gravograph

Harvest-Conference-Program--Final

Electric Go-Karts The exciting way to learn power electronics

w w w . a n t h e m A V . c o m

Bolean Lake Fire - Regional District of North Okanagan

Clinton Community College B-rrry Scurry

astrobrights® papers

PDF Flyer - PyroGraphics

Dieter Wullaert

ERL-0631-GD PR